; --------------------------------------------------------------------------------
; @Title: Z20K148M On-Chip Peripherals
; @Props: Released
; @Author: NEJ
; @Changelog: 2022-10-04 NEJ
; @Manufacturer: Zhixin - Zhixin Semiconductor Co. Ltd.
; @Doc: SVD generated (SVD2PER 1.8.5), based on: Z20K148M.svd (Ver. 0.1.0)
; @Core: Cortex-M4F
; @Chip: Z20K148M
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: perz20k148m.per 15283 2022-10-05 11:46:58Z kwisniewski $

tree.close "Core Registers (Cortex-M4F)"
AUTOINDENT.PUSH
AUTOINDENT.OFF
tree "System Control"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 12.
group.long 0x08++0x03
line.long 0x00 "ACTLR,Auxiliary Control Register"
bitfld.long 0x00 9. " DISFPCA        ,Disables lazy stacking of floating point context" "No,Yes"
bitfld.long 0x00 8. "                   DISOOFP        ,Disables floating point instructions completing" "No,Yes"
bitfld.long 0x00 2. "              DISFOLD         ,Disables folding of IT instructions" "No,Yes"
textline "                     "
bitfld.long 0x00 1. " DISDEFWBUF     ,Disables write buffer use during default memory map accesses" "No,Yes"
bitfld.long 0x00 0. "                   DISMCYCINT     ,Disables interruption of multi-cycle instructions" "No,Yes"
group.long 0x10++0x0B
line.long 0x00 "SYST_CSR,SysTick Control and Status Register"
rbitfld.long 0x00 16. " COUNTFLAG      ,Counter Flag" "Not counted,Counted"
bitfld.long 0x00 2. "           CLKSOURCE      ,SysTick clock source" "External,Core"
bitfld.long 0x00 1. "         TICKINT         ,SysTick Handler" "No SysTick,SysTick"
textline "                     "
bitfld.long 0x00 0. " ENABLE         ,Counter Enable" "Disabled,Enabled"
line.long 0x04 "SYST_RVR,SysTick Reload Value Register"
hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD         ,The value to load into the SYST_CVR when the counter reaches 0"
line.long 0x08 "SYST_CVR,SysTick Current Value Register"
rgroup.long 0x1C++0x03
line.long 0x00 "SYST_CALIB,SysTick Calibration Value Register"
bitfld.long 0x00 31. " NOREF          ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented"
bitfld.long 0x00 30. "       SKEW           ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact"
hexmask.long.tbyte 0x00 0.--23. 1. "          TENMS           ,Holds a reload value to be used for 10ms (100Hz) timing"
rgroup.long 0xD00++0x03
line.long 0x00 "CPUID,CPU ID Base Register"
hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER    ,Implementer Code"
bitfld.long 0x00 20.--23. "                    VARIANT        ,Indicates processor revision" "Revision 0,?..."
bitfld.long 0x00 16.--19. "       ARCHITECTURE    ,Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                     "
hexmask.long.word 0x00 4.--15. 1. " PARTNO         ,Indicates part number"
bitfld.long 0x00 0.--3. "                  REVISION       ,Indicates patch release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xD04++0x23
line.long 0x00 "ICSR,Interrupt Control State Register"
bitfld.long 0x00 31. " NMIPENDSET     ,Set Pending NMI Bit" "Inactive,Active"
bitfld.long 0x00 28. "              PENDSVSET      ,Set Pending pendSV Bit" "Not pending,Pending"
bitfld.long 0x00 27. "      PENDSVCLR       ,Removes the pending status of the PendSV exception" "No effect,Removed"
textline "                     "
bitfld.long 0x00 26. " PENDSTSET      ,Set Pending SysTick Bit" "Not pending,Pending"
bitfld.long 0x00 25. "           PENDSTCLR      ,Clear Pending SysTick Bit" "No effect,Removed"
bitfld.long 0x00 23. "        ISRPREEMPT      ,Use Only at Debug Time" "Not active,Active"
textline "                     "
bitfld.long 0x00 22. " ISRPENDING     ,Indicates whether an external interrupt" "Not pending,Pending"
hexmask.long.word 0x00 12.--20. 1. "           VECTPENDING    ,Pending ISR Number Field"
bitfld.long 0x00 11. "             RETTOBASE       ,Interrupt Exception" "Active,Not active"
textline "                     "
hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE     ,The exception number of the current executing exception"
line.long 0x04 "VTOR,Vector Table Offset Register"
hexmask.long 0x04 7.--31. 0x80 " TBLOFF         ,Vector table address"
line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register"
hexmask.long.word 0x08 16.--31. 1. " VECTKEY        ,Register Key"
rbitfld.long 0x08 15. "                  ENDIANESS      ,Data endianness Bit" "Little,Big"
bitfld.long 0x08 8.--10. "           PRIGROUP        ,Interrupt Priority Grouping Field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
textline "                     "
bitfld.long 0x08 2. " SYSRESETREQ    ,System Reset Request" "Not requested,Requested"
bitfld.long 0x08 1. "         VECTCLRACTIVE  ,Clear Active Vector Bit" "No effect,Clear"
bitfld.long 0x08 0. "        VECTRESET       ,System Reset" "No effect,Reset"
line.long 0x0C "SCR,System Control Register"
bitfld.long 0x0C 4. " SEVONPEND      ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup"
bitfld.long 0x0C 2. "            SLEEPDEEP      ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep"
bitfld.long 0x0C 1. "   SLEEPONEXIT     ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled"
line.long 0x10 "CCR,Configuration Control Register"
bitfld.long 0x10 18. " BP             ,Branch prediction enable bit" "Disabled,Enabled"
bitfld.long 0x10 17. "              IC             ,Instruction cache enable bit" "Disabled,Enabled"
bitfld.long 0x10 16. "         DC              ,Cache enable bit" "Disabled,Enabled"
textline "                     "
bitfld.long 0x10 9. " STKALIGN       ,8-byte Stack Frame Alignment" "4-byte/no adjustment,8-byte/adjustment"
bitfld.long 0x10 8. "  BFHFNMIGN      ,Enable NMI and Hard Fault and FAULTMASK to Ignore Bus Fault" "Disabled,Enabled"
bitfld.long 0x10 4. "         DIV_0_TRP       ,Trap Divide by Zero" "Disabled,Enabled"
textline "                     "
bitfld.long 0x10 3. " UNALIGN_TRP    ,Trap for Unaligned Access" "Disabled,Enabled"
bitfld.long 0x10 1. "              USERSETMPEND   ,Controls whether unprivileged software can access the STIR" "Denied,Allowed"
bitfld.long 0x10 0. "          NONEBASETHRDENA ,Control Entry to Thread Mode" "Only from last exception,Any level"
line.long 0x14 "SHPR1,SSystem Handler Priority Register 1"
hexmask.long.byte 0x14 24.--31. 1. " PRI_7          ,Priority of System Handler 7"
hexmask.long.byte 0x14 16.--23. 1. "                    PRI_6          ,Priority of system handler 6(UsageFault)"
hexmask.long.byte 0x14 8.--15. 1. "               PRI_5           ,Priority of system handler 5(BusFault)"
textline "                     "
hexmask.long.byte 0x14 0.--7. 1. " PRI_4          ,Priority of system handler 4(MemManage)"
line.long 0x18 "SHPR2,System Handler Priority Register 2"
hexmask.long.byte 0x18 24.--31. 1. " PRI_11         ,Priority of system handler 11(SVCall)"
hexmask.long.byte 0x18 16.--23. 1. "                    PRI_10         ,Priority of System Handler 10"
hexmask.long.byte 0x18 8.--15. 1. "               PRI_9           ,Priority of System Handler 9"
textline "                     "
hexmask.long.byte 0x18 0.--7. 1. " PRI_8          ,Priority of System Handler 8"
line.long 0x1C "SHPR3,System Handler Priority Register 3"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_15         ,Priority of System Handler 15(SysTick)"
hexmask.long.byte 0x1C 16.--23. 1. "                    PRI_14         ,Priority of System Handler 14(PendSV)"
hexmask.long.byte 0x1C 8.--15. 1. "               PRI_13          ,Priority of System Handler 13"
textline "                     "
hexmask.long.byte 0x1C 0.--7. 1. " PRI_12         ,Priority of System Handler 12(DebugMonitor)"
line.long 0x20 "SHCSR,System Handler Control and State Register"
bitfld.long 0x20 18. " USGFAULTENA    ,Enable UsageFault" "Disabled,Enabled"
bitfld.long 0x20 17. "              BUSFAULTENA    ,Enable BusFault" "Disabled,Enabled"
bitfld.long 0x20 16. "         MEMFAULTENA     ,Enable MemManage fault" "Disabled,Enabled"
textline "                     "
bitfld.long 0x20 15. " SVCALLPENDED   ,SVCall is pending" "Not pending,Pending"
bitfld.long 0x20 14. "           BUSFAULTPENDED ,BusFault is pending" "Not pending,Pending"
bitfld.long 0x20 13. "      MEMFAULTPENDED  ,MemManage is pending" "Not pending,Pending"
textline "                     "
bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault is pending" "Not pending,Pending"
bitfld.long 0x20 11. "           SYSTICKACT     ,SysTick is Active" "Not active,Active"
bitfld.long 0x20 10. "       PENDSVACT       ,PendSV is Active" "Not active,Active"
textline "                     "
bitfld.long 0x20 8. " MONITORACT     ,Monitor is Active" "Not active,Active"
bitfld.long 0x20 7. "            SVCALLACT      ,SVCall is Active" "Not active,Active"
bitfld.long 0x20 3. "       USGFAULTACT     ,UsageFault is Active" "Not active,Active"
textline "                     "
bitfld.long 0x20 1. " BUSFAULTACT    ,BusFault is Active" "Not active,Active"
bitfld.long 0x20 0. "            MEMFAULTACT    ,MemManage is Active" "Not active,Active"
group.byte 0xD28++0x1
line.byte 0x00 "MMFSR,MemManage Status Register"
bitfld.byte 0x00 7. "       MMARVALID      ,Address Valid Flag" "Not valid,Valid"
bitfld.byte 0x00 5. "             MLSPERR        ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred"
bitfld.byte 0x00 4. "     MSTKERR         ,tacking Access Violations" "Not occurred,Occurred"
textline "                     "
bitfld.byte 0x00 3. " MUNSTKERR      ,Unstack Access Violations" "Not occurred,Occurred"
bitfld.byte 0x00 1. "          DACCVIOL       ,Data Access Violation" "Not occurred,Occurred"
bitfld.byte 0x00 0. "     IACCVIOL        ,Instruction Access Violation" "Not occurred,Occurred"
line.byte 0x01 "BFSR,Bus Fault Status Register"
bitfld.byte 0x01 7. "       BFARVALID      ,Address Valid Flag" "Not valid,Valid"
bitfld.byte 0x01 5. "             LSPERR         ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred"
bitfld.byte 0x01 4. "     STKERR          ,Derived bus fault(exception entry)" "Not occurred,Occurred"
textline "                     "
bitfld.byte 0x01 3. " UNSTKERR       ,Derived bus fault(exception return)" "Not occurred,Occurred"
bitfld.byte 0x01 2. "          IMPRECISERR    ,Imprecise data access error" "Not occurred,Occurred"
bitfld.byte 0x01 1. "     PRECISERR       ,Precise data access error" "Not occurred,Occurred"
textline "                     "
bitfld.byte 0x01 0. " IBUSERR        ,Bus fault on an instruction prefetch" "Not occurred,Occurred"
group.word 0xD2A++0x1
line.word 0x00 "USAFAULT,Usage Fault Status Register"
bitfld.word 0x00 9. "     DIVBYZERO      ,Divide by zero error" "No error,Error"
bitfld.word 0x00 8. "              UNALIGNED      ,Unaligned access error" "No error,Error"
bitfld.word 0x00 3. "         NOCP            ,A coprocessor access error" "No error,Error"
textline "                     "
bitfld.word 0x00 2. " INVPC          ,An integrity check error" "No error,Error"
bitfld.word 0x00 1. "              INVSTATE       ,Invalid Combination of EPSR and Instruction" "No error,Error"
bitfld.word 0x00 0. "         UNDEFINSTR      ,Undefined instruction error" "No error,Error"
group.long 0xD2C++0x07
line.long 0x00 "HFSR,Hard Fault Status Register"
bitfld.long 0x00 31. " DEBUGEVT       ,Indicates when a Debug event has occurred" "Not occurred,Occurred"
bitfld.long 0x00 30. "          FORCED         ,Indicates that a fault with configurable priority" "Not occurred,Occurred"
bitfld.long 0x00 1. "     VECTTBL         ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred"
line.long 0x04 "DFSR,Debug Fault Status Register"
bitfld.long 0x04 4. " EXTERNAL       ,Indicates a debug event generated because of the assertion of EDBGRQ" "Not asserted,Asserted"
bitfld.long 0x04 3. "          VCATCH         ,Vector Catch Flag" "Not occurred,Occurred"
bitfld.long 0x04 2. "     DWTTRAP         ,Indicates a debug event generated by the DWT" "Not occurred,Occurred"
textline "                     "
bitfld.long 0x04 1. " BKPT           ,BKPT Flag" "Not executed,Executed"
bitfld.long 0x04 0. "          HALTED         ,Indicates a debug event generated by either" "Not requested,Requested"
group.long 0xD34++0x0B
line.long 0x00 "MMFAR,MemManage Fault Address Register"
line.long 0x04 "BFAR,BusFault Address Register"
line.long 0x08 "AFSR,Auxiliary Fault Status Register"
group.long 0xD88++0x03
line.long 0x00 "CPACR,Coprocessor Access Control Register"
bitfld.long 0x00 22.--23. " CP11           ,Access privileges for coprocessor 11" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 20.--21. "       CP10           ,Access privileges for coprocessor 10" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 14.--15. "  CP7             ,Access privileges for coprocessor 7" "Access denied,Privileged only,Reserved,Full access"
textline "                     "
bitfld.long 0x00 12.--13. " CP6            ,Access privileges for coprocessor 6" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 10.--11. "       CP5            ,Access privileges for coprocessor 5" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 8.--9. "  CP4             ,Access privileges for coprocessor 4" "Access denied,Privileged only,Reserved,Full access"
textline "                     "
bitfld.long 0x00 6.--7. " CP3            ,Access privileges for coprocessor 3" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 4.--5. "       CP2            ,Access privileges for coprocessor 2" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 2.--3. "  CP1             ,Access privileges for coprocessor 1" "Access denied,Privileged only,Reserved,Full access"
textline "                     "
bitfld.long 0x00 0.--1. " CP0            ,Access privileges for coprocessor 0" "Access denied,Privileged only,Reserved,Full access"
wgroup.long 0xF00++0x03
line.long 0x00 "STIR,Software Trigger Interrupt Register"
hexmask.long.word 0x00 0.--8. 1. " INTID          ,Indicates the interrupt to be triggered"
width 10.
tree "Feature Registers"
rgroup.long 0xD40++0x0B
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
bitfld.long 0x00 4.--7. " STATE1    ,Thumb instruction set support" ",,,Supported,?..."
bitfld.long 0x00 0.--3. "              STATE0         ,ARM instruction set support" "Not supported,?..."
line.long 0x04 "ID_PFR1,Processor Feature Register 1"
bitfld.long 0x04 8.--11. " MPROF     ,M profile programmers' model" ",,2-stack,?..."
line.long 0x08 "ID_DFR0,Debug Feature Register 0"
bitfld.long 0x08 20.--23. " DBGMOD    ,Support for memory-mapped debug model for M profile processors" "Not supported,Supported,?..."
hgroup.long 0xD4C++0x03
hide.long 0x00 "ID_AFR0,Auxiliary Feature Register 0"
rgroup.long 0xD50++0x03
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
bitfld.long 0x00 20.--23. " AUXREG    ,Indicates the support for Auxiliary registers" "Not supported,ACTLR only,?..."
bitfld.long 0x00 16.--19. "          TCMSUP         ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..."
bitfld.long 0x00 12.--15. "        SHRLEV    ,Indicates the number of shareability levels implemented" "Level 1,?..."
textline "                   "
bitfld.long 0x00 8.--11. " OUTMSHR   ,Indicates the outermost shareability domain implemented" "Non-cacheable,,,,,,,,,,,,,,,Ignored"
bitfld.long 0x00 4.--7. "          PMSASUP        ,Indicates support for a PMSA" "Not supported,,,PMSAv7,?..."
hgroup.long 0xD54++0x03
hide.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
rgroup.long 0xD58++0x03
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
bitfld.long 0x00 24.--27. " WFISTALL  ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..."
rgroup.long 0xD60++0x13
line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0"
bitfld.long 0x00 24.--27. " DIVIDE    ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..."
bitfld.long 0x00 20.--23. "          DEBUG          ,Indicates the supported debug instructions" "Not supported,BKPT,?..."
bitfld.long 0x00 16.--19. "        COPROC    ,Indicates the supported coprocessor instructions" "Not supported,CDP/LDC/MCR/STC,CDP2/LDC2/MCR2/STC2,MCRR/MRRC,MCRR2/MRRC2,?..."
textline "                   "
bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..."
bitfld.long 0x00 8.--11. "          BITFIELD       ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..."
bitfld.long 0x00 4.--7. "    BITCOUNT  ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..."
line.long 0x04 "ID_ISAR1,Instruction Set Attributes Register 1"
bitfld.long 0x04 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..."
bitfld.long 0x04 20.--23. "          IMMEDIATE      ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..."
bitfld.long 0x04 16.--19. "  IFTHEN    ,Indicates the supported IfThen instructions" "Not supported,IT,?..."
textline "                   "
bitfld.long 0x04 12.--15. " EXTEND    ,Indicates the supported Extend instructions" "Not supported,Supported,Supported,?..."
line.long 0x08 "ID_ISAR2,Instruction Set Attributes Register 2"
bitfld.long 0x08 24.--27. " REVERSAL  ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..."
bitfld.long 0x08 20.--23. "   MULTU          ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..."
bitfld.long 0x08 16.--19. "    MULTS     ,Indicates the supported advanced signed multiply instructions" "Not supported,Supported,Supported,Supported,?..."
textline "                   "
bitfld.long 0x08 12.--15. " MULT      ,Indicates the supported additional multiply instructions" "Not supported,MLA,MLA/MLS,?..."
bitfld.long 0x08 8.--11. "          MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..."
bitfld.long 0x08 4.--7. "  MEMHINT   ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..."
textline "                   "
bitfld.long 0x08 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,LDRD/STRD,?..."
line.long 0x0C "ID_ISAR3,Instruction Set Attributes Register 3"
bitfld.long 0x0C 24.--27. " TRUENOP   ,Indicates the support for a true  NOP instruction" "Not supported,Supported,?..."
bitfld.long 0x0C 20.--23. "          THUMBCOPY      ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..."
bitfld.long 0x0C 16.--19. "        TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..."
textline "                   "
bitfld.long 0x0C 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,Supported,Supported,?..."
bitfld.long 0x0C 8.--11. "          SVC            ,Indicates the supported SVC instructions" "Not supported,SVC,?..."
bitfld.long 0x0C 4.--7. "        SIMD      ,Indicates the supported SIMD instructions" "Not supported,Supported,,Supported,?..."
textline "                   "
bitfld.long 0x0C 0.--3. " SATURATE  ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB,?..."
line.long 0x10 "ID_ISAR4,Instruction Set Attributes Register 4"
bitfld.long 0x10 24.--27. " PSR_M     ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,?..."
bitfld.long 0x10 20.--23. "          SYNCHPRIMFRAC  ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,Supported,Supported,?..."
bitfld.long 0x10 16.--19. "        BARRIER   ,Indicates the supported Barrier instructions" "Not supported,DMB/DSB/ISB,?..."
textline "                   "
bitfld.long 0x10 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..."
bitfld.long 0x10 4.--7. "          WITHSHIFTS     ,Indicates the support for instructions with shifts" "MOV/shift,Shift LSL 0-3,,Shift other,?..."
bitfld.long 0x10 0.--3. "        UNPRIV    ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,LDRBT/LDRT/STRBT/STRT/LDRHT/LDRSBT/LDRSHTSTRHT,?..."
tree.end
width 6.
tree "CoreSight Identification Registers"
rgroup.long 0xFE0++0x0F
line.long 0x00 "PID0,Peripheral ID0"
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
line.long 0x04 "PID1,Peripheral ID1"
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
hexmask.long.byte 0x04 0.--3. 1. "  Part_Num[11:8] ,Part Number bits[11:8]"
line.long 0x08 "PID2,Peripheral ID2"
hexmask.long.byte 0x08 4.--7. 1. " Revision      ,Revision"
bitfld.long 0x08 3. "  JEDEC          ,JEDEC assigned ID fields" "0,JEDEC"
hexmask.long.byte 0x08 0.--2. 1. "  JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
line.long 0x0C "PID3,Peripheral ID3"
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd        ,Minor revision field"
hexmask.long.byte 0x0C 0.--3. 1. "  CMB            ,Customer-modified block"
rgroup.long 0xFD0++0x03
line.long 0x00 "PID4,Peripheral Identification Register 4"
hexmask.long.byte 0x00 4.--7. 1. " Count         ,4KB count"
hexmask.long.byte 0x00 0.--3. 1. "  JEP106_CC      ,JEP106 continuation code"
rgroup.long 0xFF0++0x0F
line.long 0x00 "CID0,Component ID0 (Preamble)"
line.long 0x04 "CID1,Component ID1"
hexmask.long.byte 0x04 4.--7. 1. " CC            ,Component Class"
hexmask.long.byte 0x04 0.--3. 1. "  Preamble       ,Preamble"
line.long 0x08 "CID2,Component ID2"
line.long 0x0C "CID3,Component ID3"
tree.end
width 0x0B
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Memory Protection Unit"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 15.
rgroup.long 0xD90++0x03
line.long 0x00 "MPU_TYPE,MPU Type Register"
bitfld.long 0x00 16.--23. " IREGION    ,Instruction region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
bitfld.long 0x00 8.--15. "               DREGION   ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
bitfld.long 0x00 0. "                    SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,Supported"
group.long 0xD94++0x03
line.long 0x00 "MPU_CTRL,MPU Control Register"
bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled"
bitfld.long 0x00 1. "         HFNMIENA  ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled"
bitfld.long 0x00 0. "          ENABLE   ,Enables the MPU" "Disabled,Enabled"
group.long 0xD98++0x03
line.long 0x00 "MPU_RNR,MPU Region Number Register"
hexmask.long.byte 0x00 0.--7. 1. " REGION     ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR"
tree.close "MPU regions"
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0
group.long 0xD9C++0x03 "Region 0"
saveout 0xD98 %l 0x0
line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x0
line.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 0 (not implemented)"
saveout 0xD98 %l 0x0
hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x0
hide.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1
group.long 0xD9C++0x03 "Region 1"
saveout 0xD98 %l 0x1
line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x1
line.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 1 (not implemented)"
saveout 0xD98 %l 0x1
hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x1
hide.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2
group.long 0xD9C++0x03 "Region 2"
saveout 0xD98 %l 0x2
line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x2
line.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 2 (not implemented)"
saveout 0xD98 %l 0x2
hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x2
hide.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3
group.long 0xD9C++0x03 "Region 3"
saveout 0xD98 %l 0x3
line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x3
line.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 3 (not implemented)"
saveout 0xD98 %l 0x3
hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x3
hide.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4
group.long 0xD9C++0x03 "Region 4"
saveout 0xD98 %l 0x4
line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x4
line.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 4 (not implemented)"
saveout 0xD98 %l 0x4
hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x4
hide.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5
group.long 0xD9C++0x03 "Region 5"
saveout 0xD98 %l 0x5
line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x5
line.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 5 (not implemented)"
saveout 0xD98 %l 0x5
hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x5
hide.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6
group.long 0xD9C++0x03 "Region 6"
saveout 0xD98 %l 0x6
line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x6
line.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 6 (not implemented)"
saveout 0xD98 %l 0x6
hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x6
hide.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7
group.long 0xD9C++0x03 "Region 7"
saveout 0xD98 %l 0x7
line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x7
line.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 7 (not implemented)"
saveout 0xD98 %l 0x7
hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x7
hide.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8
group.long 0xD9C++0x03 "Region 8"
saveout 0xD98 %l 0x8
line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x8
line.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 8 (not implemented)"
saveout 0xD98 %l 0x8
hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x8
hide.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9
group.long 0xD9C++0x03 "Region 9"
saveout 0xD98 %l 0x9
line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x9
line.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 9 (not implemented)"
saveout 0xD98 %l 0x9
hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x9
hide.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA
group.long 0xD9C++0x03 "Region 10"
saveout 0xD98 %l 0xA
line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xA
line.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 10 (not implemented)"
saveout 0xD98 %l 0xA
hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xA
hide.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB
group.long 0xD9C++0x03 "Region 11"
saveout 0xD98 %l 0xB
line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xB
line.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 11 (not implemented)"
saveout 0xD98 %l 0xB
hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xB
hide.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC
group.long 0xD9C++0x03 "Region 12"
saveout 0xD98 %l 0xC
line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xC
line.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 12 (not implemented)"
saveout 0xD98 %l 0xC
hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xC
hide.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD
group.long 0xD9C++0x03 "Region 13"
saveout 0xD98 %l 0xD
line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xD
line.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 13 (not implemented)"
saveout 0xD98 %l 0xD
hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xD
hide.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE
group.long 0xD9C++0x03 "Region 14"
saveout 0xD98 %l 0xE
line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xE
line.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 14 (not implemented)"
saveout 0xD98 %l 0xE
hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xE
hide.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF
group.long 0xD9C++0x03 "Region 15"
saveout 0xD98 %l 0xF
line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xF
line.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 15 (not implemented)"
saveout 0xD98 %l 0xF
hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xF
hide.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
textline "                        "
textline "                        "
endif
tree.end
width 0x0b
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Nested Vectored Interrupt Controller"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 6.
rgroup.long 0x04++0x03
line.long 0x00 "ICTR,Interrupt Controller Type Register"
bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,33-64,65-96,97-128,129-160,161-192,193-224,225-240,?..."
tree "Interrupt Enable Registers"
width 23.
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
group.long 0x100++0x03
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
group.long 0x100++0x7
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
group.long 0x100++0x0B
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
group.long 0x100++0x0F
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
group.long 0x100++0x13
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
group.long 0x100++0x17
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
group.long 0x100++0x1B
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 30. 0x18 30. 0x98 30. "  ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 29. 0x18 29. 0x98 29. "  ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 28. 0x18 28. 0x98 28. "  ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 27. 0x18 27. 0x98 27. "  ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 26. 0x18 26. 0x98 26. "  ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 24. 0x18 24. 0x98 24. "  ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 23. 0x18 23. 0x98 23. "  ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 22. 0x18 22. 0x98 22. "  ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 21. 0x18 21. 0x98 21. "  ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 20. 0x18 20. 0x98 20. "  ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 18. 0x18 18. 0x98 18. "  ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 17. 0x18 17. 0x98 17. "  ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 16. 0x18 16. 0x98 16. "  ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 15. 0x18 15. 0x98 15. "  ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 14. 0x18 14. 0x98 14. "  ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 12. 0x18 12. 0x98 12. "  ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 11. 0x18 11. 0x98 11. "  ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 10. 0x18 10. 0x98 10. "  ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 9. 0x18 9. 0x98 9. "  ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 8. 0x18 8. 0x98 8. "  ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 6. 0x18 6. 0x98 6. "  ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 5. 0x18 5. 0x98 5. "  ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 4. 0x18 4. 0x98 4. "  ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 3. 0x18 3. 0x98 3. "  ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 2. 0x18 2. 0x98 2. "  ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 0. 0x18 0. 0x98 0. "  ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
group.long 0x100++0x1F
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 30. 0x18 30. 0x98 30. "  ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 29. 0x18 29. 0x98 29. "  ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 28. 0x18 28. 0x98 28. "  ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 27. 0x18 27. 0x98 27. "  ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 26. 0x18 26. 0x98 26. "  ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 24. 0x18 24. 0x98 24. "  ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 23. 0x18 23. 0x98 23. "  ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 22. 0x18 22. 0x98 22. "  ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 21. 0x18 21. 0x98 21. "  ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 20. 0x18 20. 0x98 20. "  ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 18. 0x18 18. 0x98 18. "  ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 17. 0x18 17. 0x98 17. "  ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 16. 0x18 16. 0x98 16. "  ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 15. 0x18 15. 0x98 15. "  ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 14. 0x18 14. 0x98 14. "  ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 12. 0x18 12. 0x98 12. "  ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 11. 0x18 11. 0x98 11. "  ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 10. 0x18 10. 0x98 10. "  ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 9. 0x18 9. 0x98 9. "  ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 8. 0x18 8. 0x98 8. "  ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 6. 0x18 6. 0x98 6. "  ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 5. 0x18 5. 0x98 5. "  ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 4. 0x18 4. 0x98 4. "  ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 3. 0x18 3. 0x98 3. "  ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 2. 0x18 2. 0x98 2. "  ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 0. 0x18 0. 0x98 0. "  ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. "  ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. "  ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. "  ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. "  ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. "  ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. "  ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. "  ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. "  ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. "  ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. "  ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. "  ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. "  ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. "  ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
else
hgroup.long 0x100++0x1F
hide.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
endif
tree.end
tree "Interrupt Pending Registers"
width 23.
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
group.long 0x200++0x03
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
group.long 0x200++0x07
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
group.long 0x200++0x0B
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
group.long 0x200++0x0F
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
group.long 0x200++0x13
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
group.long 0x200++0x17
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
group.long 0x200++0x1B
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 30. 0x18 30. 0x98 30. "  PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 29. 0x18 29. 0x98 29. "  PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 28. 0x18 28. 0x98 28. "  PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 27. 0x18 27. 0x98 27. "  PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 26. 0x18 26. 0x98 26. "  PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 24. 0x18 24. 0x98 24. "  PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 23. 0x18 23. 0x98 23. "  PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 22. 0x18 22. 0x98 22. "  PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 21. 0x18 21. 0x98 21. "  PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 20. 0x18 20. 0x98 20. "  PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 18. 0x18 18. 0x98 18. "  PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 17. 0x18 17. 0x98 17. "  PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 16. 0x18 16. 0x98 16. "  PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 15. 0x18 15. 0x98 15. "  PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 14. 0x18 14. 0x98 14. "  PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 12. 0x18 12. 0x98 12. "  PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 11. 0x18 11. 0x98 11. "  PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 10. 0x18 10. 0x98 10. "  PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 9. 0x18 9. 0x98 9. "  PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 8. 0x18 8. 0x98 8. "  PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 6. 0x18 6. 0x98 6. "  PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 5. 0x18 5. 0x98 5. "  PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 4. 0x18 4. 0x98 4. "  PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 3. 0x18 3. 0x98 3. "  PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 2. 0x18 2. 0x98 2. "  PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 0. 0x18 0. 0x98 0. "  PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
group.long 0x200++0x1F
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 30. 0x18 30. 0x98 30. "  PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 29. 0x18 29. 0x98 29. "  PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 28. 0x18 28. 0x98 28. "  PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 27. 0x18 27. 0x98 27. "  PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 26. 0x18 26. 0x98 26. "  PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 24. 0x18 24. 0x98 24. "  PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 23. 0x18 23. 0x98 23. "  PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 22. 0x18 22. 0x98 22. "  PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 21. 0x18 21. 0x98 21. "  PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 20. 0x18 20. 0x98 20. "  PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 18. 0x18 18. 0x98 18. "  PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 17. 0x18 17. 0x98 17. "  PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 16. 0x18 16. 0x98 16. "  PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 15. 0x18 15. 0x98 15. "  PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 14. 0x18 14. 0x98 14. "  PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 12. 0x18 12. 0x98 12. "  PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 11. 0x18 11. 0x98 11. "  PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 10. 0x18 10. 0x98 10. "  PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 9. 0x18 9. 0x98 9. "  PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 8. 0x18 8. 0x98 8. "  PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 6. 0x18 6. 0x98 6. "  PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 5. 0x18 5. 0x98 5. "  PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 4. 0x18 4. 0x98 4. "  PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 3. 0x18 3. 0x98 3. "  PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 2. 0x18 2. 0x98 2. "  PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 0. 0x18 0. 0x98 0. "  PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. "  PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. "  PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. "  PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. "  PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. "  PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. "  PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. "  PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. "  PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. "  PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. "  PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. "  PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. "  PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. "  PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending"
else
hgroup.long 0x200++0x1F
hide.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
endif
tree.end
tree "Interrupt Active Bit Registers"
width 9.
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
rgroup.long 0x300++0x03
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
rgroup.long 0x300++0x07
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
rgroup.long 0x300++0x0B
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
rgroup.long 0x300++0x0F
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
rgroup.long 0x300++0x13
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
line.long 0x10 "ACTIVE5,Active Bit Register 5"
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 30. "  ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 29. "  ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 28. "  ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 27. "  ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 26. "  ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 24. "  ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 23. "  ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 22. "  ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 21. "  ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 20. "  ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 18. "  ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 17. "  ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 16. "  ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 15. "  ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 14. "  ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 12. "  ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 11. "  ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 10. "  ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 9. "  ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 8. "  ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 6. "  ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 5. "  ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 4. "  ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 3. "  ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 2. "  ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 0. "  ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
rgroup.long 0x300++0x17
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
line.long 0x10 "ACTIVE5,Active Bit Register 5"
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 30. "  ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 29. "  ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 28. "  ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 27. "  ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 26. "  ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 24. "  ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 23. "  ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 22. "  ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 21. "  ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 20. "  ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 18. "  ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 17. "  ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 16. "  ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 15. "  ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 14. "  ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 12. "  ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 11. "  ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 10. "  ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 9. "  ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 8. "  ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 6. "  ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 5. "  ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 4. "  ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 3. "  ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 2. "  ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 0. "  ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
line.long 0x14 "ACTIVE6,Active Bit Register 6"
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 30. "  ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 29. "  ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 28. "  ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 27. "  ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 26. "  ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 24. "  ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 23. "  ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 22. "  ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 21. "  ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 20. "  ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 18. "  ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 17. "  ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 16. "  ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 15. "  ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 14. "  ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 12. "  ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 11. "  ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 10. "  ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 9. "  ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 8. "  ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 6. "  ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 5. "  ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 4. "  ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 3. "  ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 2. "  ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 0. "  ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
rgroup.long 0x300++0x1B
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
line.long 0x10 "ACTIVE5,Active Bit Register 5"
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 30. "  ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 29. "  ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 28. "  ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 27. "  ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 26. "  ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 24. "  ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 23. "  ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 22. "  ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 21. "  ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 20. "  ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 18. "  ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 17. "  ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 16. "  ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 15. "  ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 14. "  ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 12. "  ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 11. "  ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 10. "  ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 9. "  ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 8. "  ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 6. "  ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 5. "  ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 4. "  ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 3. "  ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 2. "  ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 0. "  ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
line.long 0x14 "ACTIVE6,Active Bit Register 6"
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 30. "  ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 29. "  ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 28. "  ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 27. "  ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 26. "  ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 24. "  ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 23. "  ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 22. "  ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 21. "  ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 20. "  ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 18. "  ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 17. "  ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 16. "  ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 15. "  ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 14. "  ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 12. "  ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 11. "  ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 10. "  ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 9. "  ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 8. "  ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 6. "  ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 5. "  ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 4. "  ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 3. "  ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 2. "  ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 0. "  ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
line.long 0x18 "ACTIVE7,Active Bit Register 7"
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 30. "  ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 29. "  ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 28. "  ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 27. "  ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 26. "  ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 24. "  ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 23. "  ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 22. "  ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 21. "  ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 20. "  ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 18. "  ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 17. "  ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 16. "  ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 15. "  ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 14. "  ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 12. "  ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 11. "  ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 10. "  ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 9. "  ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 8. "  ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 6. "  ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 5. "  ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 4. "  ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 3. "  ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 2. "  ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 0. "  ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
rgroup.long 0x300++0x1F
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
line.long 0x10 "ACTIVE5,Active Bit Register 5"
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 30. "  ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 29. "  ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 28. "  ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 27. "  ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 26. "  ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 24. "  ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 23. "  ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 22. "  ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 21. "  ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 20. "  ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 18. "  ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 17. "  ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 16. "  ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 15. "  ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 14. "  ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 12. "  ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 11. "  ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 10. "  ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 9. "  ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 8. "  ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 6. "  ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 5. "  ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 4. "  ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 3. "  ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 2. "  ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 0. "  ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
line.long 0x14 "ACTIVE6,Active Bit Register 6"
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 30. "  ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 29. "  ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 28. "  ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 27. "  ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 26. "  ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 24. "  ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 23. "  ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 22. "  ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 21. "  ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 20. "  ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 18. "  ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 17. "  ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 16. "  ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 15. "  ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 14. "  ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 12. "  ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 11. "  ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 10. "  ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 9. "  ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 8. "  ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 6. "  ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 5. "  ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 4. "  ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 3. "  ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 2. "  ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 0. "  ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
line.long 0x18 "ACTIVE7,Active Bit Register 7"
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 30. "  ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 29. "  ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 28. "  ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 27. "  ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 26. "  ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 24. "  ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 23. "  ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 22. "  ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 21. "  ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 20. "  ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 18. "  ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 17. "  ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 16. "  ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 15. "  ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 14. "  ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 12. "  ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 11. "  ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 10. "  ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 9. "  ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 8. "  ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 6. "  ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 5. "  ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 4. "  ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 3. "  ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 2. "  ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 0. "  ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
line.long 0x1c "ACTIVE8,Active Bit Register 8"
bitfld.long 0x1c 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 14. "  ACTIVE238 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 13. "  ACTIVE237 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 12. "  ACTIVE236 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 11. "  ACTIVE235 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 10. "  ACTIVE234 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x1c 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 8. "  ACTIVE232 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 7. "  ACTIVE231 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 6. "  ACTIVE230 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 5. "  ACTIVE229 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 4. "  ACTIVE228 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x1c 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 2. "  ACTIVE226 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 1. "  ACTIVE225 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 0. "  ACTIVE224 ,Interrupt Active Flag" "Not active,Active"
else
hgroup.long 0x300++0x1F
hide.long 0x00 "ACTIVE1,Active Bit Register 1"
hide.long 0x04 "ACTIVE2,Active Bit Register 2"
hide.long 0x08 "ACTIVE3,Active Bit Register 3"
hide.long 0x0c "ACTIVE4,Active Bit Register 4"
hide.long 0x10 "ACTIVE5,Active Bit Register 5"
hide.long 0x14 "ACTIVE6,Active Bit Register 6"
hide.long 0x18 "ACTIVE7,Active Bit Register 7"
hide.long 0x1c "ACTIVE8,Active Bit Register 8"
endif
tree.end
tree "Interrupt Priority Registers"
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
group.long 0x400++0x1F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
group.long 0x400++0x3F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
group.long 0x400++0x5F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
group.long 0x400++0x7F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99  ,Interrupt 99  Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98  ,Interrupt 98  Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97  ,Interrupt 97  Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96  ,Interrupt 96  Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
group.long 0x400++0x9F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99  ,Interrupt 99  Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98  ,Interrupt 98  Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97  ,Interrupt 97  Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96  ,Interrupt 96  Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
line.long 0x80 "IPR32,Interrupt Priority Register"
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
hexmask.long.byte 0x80 16.--23. 1. "  PRI_130 ,Interrupt 130 Priority"
hexmask.long.byte 0x80 8.--15. 1. "  PRI_129 ,Interrupt 129 Priority"
hexmask.long.byte 0x80 0.--7. 1. "  PRI_128 ,Interrupt 128 Priority"
line.long 0x84 "IPR33,Interrupt Priority Register"
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
hexmask.long.byte 0x84 16.--23. 1. "  PRI_134 ,Interrupt 134 Priority"
hexmask.long.byte 0x84 8.--15. 1. "  PRI_133 ,Interrupt 133 Priority"
hexmask.long.byte 0x84 0.--7. 1. "  PRI_132 ,Interrupt 132 Priority"
line.long 0x88 "IPR34,Interrupt Priority Register"
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
hexmask.long.byte 0x88 16.--23. 1. "  PRI_138 ,Interrupt 138 Priority"
hexmask.long.byte 0x88 8.--15. 1. "  PRI_137 ,Interrupt 137 Priority"
hexmask.long.byte 0x88 0.--7. 1. "  PRI_136 ,Interrupt 136 Priority"
line.long 0x8C "IPR35,Interrupt Priority Register"
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
hexmask.long.byte 0x8C 16.--23. 1. "  PRI_142 ,Interrupt 142 Priority"
hexmask.long.byte 0x8C 8.--15. 1. "  PRI_141 ,Interrupt 141 Priority"
hexmask.long.byte 0x8C 0.--7. 1. "  PRI_140 ,Interrupt 140 Priority"
line.long 0x90 "IPR36,Interrupt Priority Register"
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
hexmask.long.byte 0x90 16.--23. 1. "  PRI_146 ,Interrupt 146 Priority"
hexmask.long.byte 0x90 8.--15. 1. "  PRI_145 ,Interrupt 145 Priority"
hexmask.long.byte 0x90 0.--7. 1. "  PRI_144 ,Interrupt 144 Priority"
line.long 0x94 "IPR37,Interrupt Priority Register"
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
hexmask.long.byte 0x94 16.--23. 1. "  PRI_150 ,Interrupt 150 Priority"
hexmask.long.byte 0x94 8.--15. 1. "  PRI_149 ,Interrupt 149 Priority"
hexmask.long.byte 0x94 0.--7. 1. "  PRI_148 ,Interrupt 148 Priority"
line.long 0x98 "IPR38,Interrupt Priority Register"
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
hexmask.long.byte 0x98 16.--23. 1. "  PRI_154 ,Interrupt 154 Priority"
hexmask.long.byte 0x98 8.--15. 1. "  PRI_153 ,Interrupt 153 Priority"
hexmask.long.byte 0x98 0.--7. 1. "  PRI_152 ,Interrupt 152 Priority"
line.long 0x9C "IPR39,Interrupt Priority Register"
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
hexmask.long.byte 0x9C 16.--23. 1. "  PRI_158 ,Interrupt 158 Priority"
hexmask.long.byte 0x9C 8.--15. 1. "  PRI_157 ,Interrupt 157 Priority"
hexmask.long.byte 0x9C 0.--7. 1. "  PRI_156 ,Interrupt 156 Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
group.long 0x400++0xBF
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99  ,Interrupt 99  Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98  ,Interrupt 98  Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97  ,Interrupt 97  Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96  ,Interrupt 96  Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
line.long 0x80 "IPR32,Interrupt Priority Register"
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
hexmask.long.byte 0x80 16.--23. 1. "  PRI_130 ,Interrupt 130 Priority"
hexmask.long.byte 0x80 8.--15. 1. "  PRI_129 ,Interrupt 129 Priority"
hexmask.long.byte 0x80 0.--7. 1. "  PRI_128 ,Interrupt 128 Priority"
line.long 0x84 "IPR33,Interrupt Priority Register"
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
hexmask.long.byte 0x84 16.--23. 1. "  PRI_134 ,Interrupt 134 Priority"
hexmask.long.byte 0x84 8.--15. 1. "  PRI_133 ,Interrupt 133 Priority"
hexmask.long.byte 0x84 0.--7. 1. "  PRI_132 ,Interrupt 132 Priority"
line.long 0x88 "IPR34,Interrupt Priority Register"
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
hexmask.long.byte 0x88 16.--23. 1. "  PRI_138 ,Interrupt 138 Priority"
hexmask.long.byte 0x88 8.--15. 1. "  PRI_137 ,Interrupt 137 Priority"
hexmask.long.byte 0x88 0.--7. 1. "  PRI_136 ,Interrupt 136 Priority"
line.long 0x8C "IPR35,Interrupt Priority Register"
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
hexmask.long.byte 0x8C 16.--23. 1. "  PRI_142 ,Interrupt 142 Priority"
hexmask.long.byte 0x8C 8.--15. 1. "  PRI_141 ,Interrupt 141 Priority"
hexmask.long.byte 0x8C 0.--7. 1. "  PRI_140 ,Interrupt 140 Priority"
line.long 0x90 "IPR36,Interrupt Priority Register"
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
hexmask.long.byte 0x90 16.--23. 1. "  PRI_146 ,Interrupt 146 Priority"
hexmask.long.byte 0x90 8.--15. 1. "  PRI_145 ,Interrupt 145 Priority"
hexmask.long.byte 0x90 0.--7. 1. "  PRI_144 ,Interrupt 144 Priority"
line.long 0x94 "IPR37,Interrupt Priority Register"
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
hexmask.long.byte 0x94 16.--23. 1. "  PRI_150 ,Interrupt 150 Priority"
hexmask.long.byte 0x94 8.--15. 1. "  PRI_149 ,Interrupt 149 Priority"
hexmask.long.byte 0x94 0.--7. 1. "  PRI_148 ,Interrupt 148 Priority"
line.long 0x98 "IPR38,Interrupt Priority Register"
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
hexmask.long.byte 0x98 16.--23. 1. "  PRI_154 ,Interrupt 154 Priority"
hexmask.long.byte 0x98 8.--15. 1. "  PRI_153 ,Interrupt 153 Priority"
hexmask.long.byte 0x98 0.--7. 1. "  PRI_152 ,Interrupt 152 Priority"
line.long 0x9C "IPR39,Interrupt Priority Register"
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
hexmask.long.byte 0x9C 16.--23. 1. "  PRI_158 ,Interrupt 158 Priority"
hexmask.long.byte 0x9C 8.--15. 1. "  PRI_157 ,Interrupt 157 Priority"
hexmask.long.byte 0x9C 0.--7. 1. "  PRI_156 ,Interrupt 156 Priority"
line.long 0xA0 "IPR40,Interrupt Priority Register"
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
hexmask.long.byte 0xA0 16.--23. 1. "  PRI_162 ,Interrupt 162 Priority"
hexmask.long.byte 0xA0 8.--15. 1. "  PRI_161 ,Interrupt 161 Priority"
hexmask.long.byte 0xA0 0.--7. 1. "  PRI_160 ,Interrupt 160 Priority"
line.long 0xA4 "IPR41,Interrupt Priority Register"
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
hexmask.long.byte 0xA4 16.--23. 1. "  PRI_166 ,Interrupt 166 Priority"
hexmask.long.byte 0xA4 8.--15. 1. "  PRI_165 ,Interrupt 165 Priority"
hexmask.long.byte 0xA4 0.--7. 1. "  PRI_164 ,Interrupt 164 Priority"
line.long 0xA8 "IPR42,Interrupt Priority Register"
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
hexmask.long.byte 0xA8 16.--23. 1. "  PRI_170 ,Interrupt 170 Priority"
hexmask.long.byte 0xA8 8.--15. 1. "  PRI_169 ,Interrupt 169 Priority"
hexmask.long.byte 0xA8 0.--7. 1. "  PRI_168 ,Interrupt 168 Priority"
line.long 0xAC "IPR43,Interrupt Priority Register"
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
hexmask.long.byte 0xAC 16.--23. 1. "  PRI_174 ,Interrupt 174 Priority"
hexmask.long.byte 0xAC 8.--15. 1. "  PRI_173 ,Interrupt 173 Priority"
hexmask.long.byte 0xAC 0.--7. 1. "  PRI_172 ,Interrupt 172 Priority"
line.long 0xB0 "IPR44,Interrupt Priority Register"
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
hexmask.long.byte 0xB0 16.--23. 1. "  PRI_178 ,Interrupt 178 Priority"
hexmask.long.byte 0xB0 8.--15. 1. "  PRI_177 ,Interrupt 177 Priority"
hexmask.long.byte 0xB0 0.--7. 1. "  PRI_176 ,Interrupt 176 Priority"
line.long 0xB4 "IPR45,Interrupt Priority Register"
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
hexmask.long.byte 0xB4 16.--23. 1. "  PRI_182 ,Interrupt 182 Priority"
hexmask.long.byte 0xB4 8.--15. 1. "  PRI_181 ,Interrupt 181 Priority"
hexmask.long.byte 0xB4 0.--7. 1. "  PRI_180 ,Interrupt 180 Priority"
line.long 0xB8 "IPR46,Interrupt Priority Register"
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
hexmask.long.byte 0xB8 16.--23. 1. "  PRI_186 ,Interrupt 186 Priority"
hexmask.long.byte 0xB8 8.--15. 1. "  PRI_185 ,Interrupt 185 Priority"
hexmask.long.byte 0xB8 0.--7. 1. "  PRI_184 ,Interrupt 184 Priority"
line.long 0xBC "IPR47,Interrupt Priority Register"
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
hexmask.long.byte 0xBC 16.--23. 1. "  PRI_190 ,Interrupt 190 Priority"
hexmask.long.byte 0xBC 8.--15. 1. "  PRI_189 ,Interrupt 189 Priority"
hexmask.long.byte 0xBC 0.--7. 1. "  PRI_188 ,Interrupt 188 Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
group.long 0x400++0xDF
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99  ,Interrupt 99  Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98  ,Interrupt 98  Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97  ,Interrupt 97  Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96  ,Interrupt 96  Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
line.long 0x80 "IPR32,Interrupt Priority Register"
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
hexmask.long.byte 0x80 16.--23. 1. "  PRI_130 ,Interrupt 130 Priority"
hexmask.long.byte 0x80 8.--15. 1. "  PRI_129 ,Interrupt 129 Priority"
hexmask.long.byte 0x80 0.--7. 1. "  PRI_128 ,Interrupt 128 Priority"
line.long 0x84 "IPR33,Interrupt Priority Register"
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
hexmask.long.byte 0x84 16.--23. 1. "  PRI_134 ,Interrupt 134 Priority"
hexmask.long.byte 0x84 8.--15. 1. "  PRI_133 ,Interrupt 133 Priority"
hexmask.long.byte 0x84 0.--7. 1. "  PRI_132 ,Interrupt 132 Priority"
line.long 0x88 "IPR34,Interrupt Priority Register"
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
hexmask.long.byte 0x88 16.--23. 1. "  PRI_138 ,Interrupt 138 Priority"
hexmask.long.byte 0x88 8.--15. 1. "  PRI_137 ,Interrupt 137 Priority"
hexmask.long.byte 0x88 0.--7. 1. "  PRI_136 ,Interrupt 136 Priority"
line.long 0x8C "IPR35,Interrupt Priority Register"
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
hexmask.long.byte 0x8C 16.--23. 1. "  PRI_142 ,Interrupt 142 Priority"
hexmask.long.byte 0x8C 8.--15. 1. "  PRI_141 ,Interrupt 141 Priority"
hexmask.long.byte 0x8C 0.--7. 1. "  PRI_140 ,Interrupt 140 Priority"
line.long 0x90 "IPR36,Interrupt Priority Register"
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
hexmask.long.byte 0x90 16.--23. 1. "  PRI_146 ,Interrupt 146 Priority"
hexmask.long.byte 0x90 8.--15. 1. "  PRI_145 ,Interrupt 145 Priority"
hexmask.long.byte 0x90 0.--7. 1. "  PRI_144 ,Interrupt 144 Priority"
line.long 0x94 "IPR37,Interrupt Priority Register"
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
hexmask.long.byte 0x94 16.--23. 1. "  PRI_150 ,Interrupt 150 Priority"
hexmask.long.byte 0x94 8.--15. 1. "  PRI_149 ,Interrupt 149 Priority"
hexmask.long.byte 0x94 0.--7. 1. "  PRI_148 ,Interrupt 148 Priority"
line.long 0x98 "IPR38,Interrupt Priority Register"
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
hexmask.long.byte 0x98 16.--23. 1. "  PRI_154 ,Interrupt 154 Priority"
hexmask.long.byte 0x98 8.--15. 1. "  PRI_153 ,Interrupt 153 Priority"
hexmask.long.byte 0x98 0.--7. 1. "  PRI_152 ,Interrupt 152 Priority"
line.long 0x9C "IPR39,Interrupt Priority Register"
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
hexmask.long.byte 0x9C 16.--23. 1. "  PRI_158 ,Interrupt 158 Priority"
hexmask.long.byte 0x9C 8.--15. 1. "  PRI_157 ,Interrupt 157 Priority"
hexmask.long.byte 0x9C 0.--7. 1. "  PRI_156 ,Interrupt 156 Priority"
line.long 0xA0 "IPR40,Interrupt Priority Register"
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
hexmask.long.byte 0xA0 16.--23. 1. "  PRI_162 ,Interrupt 162 Priority"
hexmask.long.byte 0xA0 8.--15. 1. "  PRI_161 ,Interrupt 161 Priority"
hexmask.long.byte 0xA0 0.--7. 1. "  PRI_160 ,Interrupt 160 Priority"
line.long 0xA4 "IPR41,Interrupt Priority Register"
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
hexmask.long.byte 0xA4 16.--23. 1. "  PRI_166 ,Interrupt 166 Priority"
hexmask.long.byte 0xA4 8.--15. 1. "  PRI_165 ,Interrupt 165 Priority"
hexmask.long.byte 0xA4 0.--7. 1. "  PRI_164 ,Interrupt 164 Priority"
line.long 0xA8 "IPR42,Interrupt Priority Register"
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
hexmask.long.byte 0xA8 16.--23. 1. "  PRI_170 ,Interrupt 170 Priority"
hexmask.long.byte 0xA8 8.--15. 1. "  PRI_169 ,Interrupt 169 Priority"
hexmask.long.byte 0xA8 0.--7. 1. "  PRI_168 ,Interrupt 168 Priority"
line.long 0xAC "IPR43,Interrupt Priority Register"
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
hexmask.long.byte 0xAC 16.--23. 1. "  PRI_174 ,Interrupt 174 Priority"
hexmask.long.byte 0xAC 8.--15. 1. "  PRI_173 ,Interrupt 173 Priority"
hexmask.long.byte 0xAC 0.--7. 1. "  PRI_172 ,Interrupt 172 Priority"
line.long 0xB0 "IPR44,Interrupt Priority Register"
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
hexmask.long.byte 0xB0 16.--23. 1. "  PRI_178 ,Interrupt 178 Priority"
hexmask.long.byte 0xB0 8.--15. 1. "  PRI_177 ,Interrupt 177 Priority"
hexmask.long.byte 0xB0 0.--7. 1. "  PRI_176 ,Interrupt 176 Priority"
line.long 0xB4 "IPR45,Interrupt Priority Register"
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
hexmask.long.byte 0xB4 16.--23. 1. "  PRI_182 ,Interrupt 182 Priority"
hexmask.long.byte 0xB4 8.--15. 1. "  PRI_181 ,Interrupt 181 Priority"
hexmask.long.byte 0xB4 0.--7. 1. "  PRI_180 ,Interrupt 180 Priority"
line.long 0xB8 "IPR46,Interrupt Priority Register"
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
hexmask.long.byte 0xB8 16.--23. 1. "  PRI_186 ,Interrupt 186 Priority"
hexmask.long.byte 0xB8 8.--15. 1. "  PRI_185 ,Interrupt 185 Priority"
hexmask.long.byte 0xB8 0.--7. 1. "  PRI_184 ,Interrupt 184 Priority"
line.long 0xBC "IPR47,Interrupt Priority Register"
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
hexmask.long.byte 0xBC 16.--23. 1. "  PRI_190 ,Interrupt 190 Priority"
hexmask.long.byte 0xBC 8.--15. 1. "  PRI_189 ,Interrupt 189 Priority"
hexmask.long.byte 0xBC 0.--7. 1. "  PRI_188 ,Interrupt 188 Priority"
line.long 0xC0 "IPR48,Interrupt Priority Register"
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
hexmask.long.byte 0xC0 16.--23. 1. "  PRI_194 ,Interrupt 194 Priority"
hexmask.long.byte 0xC0 8.--15. 1. "  PRI_193 ,Interrupt 193 Priority"
hexmask.long.byte 0xC0 0.--7. 1. "  PRI_192 ,Interrupt 192 Priority"
line.long 0xC4 "IPR49,Interrupt Priority Register"
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
hexmask.long.byte 0xC4 16.--23. 1. "  PRI_198 ,Interrupt 198 Priority"
hexmask.long.byte 0xC4 8.--15. 1. "  PRI_197 ,Interrupt 197 Priority"
hexmask.long.byte 0xC4 0.--7. 1. "  PRI_196 ,Interrupt 196 Priority"
line.long 0xC8 "IPR50,Interrupt Priority Register"
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
hexmask.long.byte 0xC8 16.--23. 1. "  PRI_202 ,Interrupt 202 Priority"
hexmask.long.byte 0xC8 8.--15. 1. "  PRI_201 ,Interrupt 201 Priority"
hexmask.long.byte 0xC8 0.--7. 1. "  PRI_200 ,Interrupt 200 Priority"
line.long 0xCC "IPR51,Interrupt Priority Register"
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
hexmask.long.byte 0xCC 16.--23. 1. "  PRI_206 ,Interrupt 206 Priority"
hexmask.long.byte 0xCC 8.--15. 1. "  PRI_205 ,Interrupt 205 Priority"
hexmask.long.byte 0xCC 0.--7. 1. "  PRI_204 ,Interrupt 204 Priority"
line.long 0xD0 "IPR52,Interrupt Priority Register"
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
hexmask.long.byte 0xD0 16.--23. 1. "  PRI_210 ,Interrupt 210 Priority"
hexmask.long.byte 0xD0 8.--15. 1. "  PRI_209 ,Interrupt 209 Priority"
hexmask.long.byte 0xD0 0.--7. 1. "  PRI_208 ,Interrupt 208 Priority"
line.long 0xD4 "IPR53,Interrupt Priority Register"
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
hexmask.long.byte 0xD4 16.--23. 1. "  PRI_214 ,Interrupt 214 Priority"
hexmask.long.byte 0xD4 8.--15. 1. "  PRI_213 ,Interrupt 213 Priority"
hexmask.long.byte 0xD4 0.--7. 1. "  PRI_212 ,Interrupt 212 Priority"
line.long 0xD8 "IPR54,Interrupt Priority Register"
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
hexmask.long.byte 0xD8 16.--23. 1. "  PRI_218 ,Interrupt 218 Priority"
hexmask.long.byte 0xD8 8.--15. 1. "  PRI_217 ,Interrupt 217 Priority"
hexmask.long.byte 0xD8 0.--7. 1. "  PRI_216 ,Interrupt 216 Priority"
line.long 0xDC "IPR55,Interrupt Priority Register"
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
hexmask.long.byte 0xDC 16.--23. 1. "  PRI_222 ,Interrupt 222 Priority"
hexmask.long.byte 0xDC 8.--15. 1. "  PRI_221 ,Interrupt 221 Priority"
hexmask.long.byte 0xDC 0.--7. 1. "  PRI_220 ,Interrupt 220 Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
group.long 0x400++0xEF
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2 ,Interrupt 2 Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1 ,Interrupt 1 Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0 ,Interrupt 0 Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6 ,Interrupt 6 Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5 ,Interrupt 5 Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4 ,Interrupt 4 Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10 ,Interrupt 10 Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9 ,Interrupt 9 Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8 ,Interrupt 8 Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14 ,Interrupt 14 Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13 ,Interrupt 13 Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12 ,Interrupt 12 Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18 ,Interrupt 18 Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17 ,Interrupt 17 Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16 ,Interrupt 16 Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22 ,Interrupt 22 Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21 ,Interrupt 21 Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20 ,Interrupt 20 Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26 ,Interrupt 26 Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25 ,Interrupt 25 Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24 ,Interrupt 24 Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30 ,Interrupt 30 Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29 ,Interrupt 29 Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28 ,Interrupt 28 Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34 ,Interrupt 34 Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33 ,Interrupt 33 Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32 ,Interrupt 32 Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38 ,Interrupt 38 Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37 ,Interrupt 37 Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36 ,Interrupt 36 Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42 ,Interrupt 42 Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41 ,Interrupt 41 Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40 ,Interrupt 40 Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46 ,Interrupt 46 Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45 ,Interrupt 45 Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44 ,Interrupt 44 Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50 ,Interrupt 50 Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49 ,Interrupt 49 Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48 ,Interrupt 48 Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54 ,Interrupt 54 Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53 ,Interrupt 53 Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52 ,Interrupt 52 Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58 ,Interrupt 58 Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57 ,Interrupt 57 Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56 ,Interrupt 56 Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62 ,Interrupt 62 Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61 ,Interrupt 61 Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60 ,Interrupt 60 Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66 ,Interrupt 66 Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65 ,Interrupt 65 Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64 ,Interrupt 64 Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70 ,Interrupt 70 Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69 ,Interrupt 69 Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68 ,Interrupt 68 Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74 ,Interrupt 74 Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73 ,Interrupt 73 Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72 ,Interrupt 72 Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78 ,Interrupt 78 Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77 ,Interrupt 77 Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76 ,Interrupt 76 Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82 ,Interrupt 82 Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81 ,Interrupt 81 Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80 ,Interrupt 80 Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86 ,Interrupt 86 Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85 ,Interrupt 85 Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84 ,Interrupt 84 Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90 ,Interrupt 90 Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89 ,Interrupt 89 Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88 ,Interrupt 88 Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94 ,Interrupt 94 Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93 ,Interrupt 93 Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92 ,Interrupt 92 Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98 ,Interrupt 98 Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97 ,Interrupt 97 Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96 ,Interrupt 96 Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
line.long 0x80 "IPR32,Interrupt Priority Register"
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
hexmask.long.byte 0x80 16.--23. 1. "  PRI_130 ,Interrupt 130 Priority"
hexmask.long.byte 0x80 8.--15. 1. "  PRI_129 ,Interrupt 129 Priority"
hexmask.long.byte 0x80 0.--7. 1. "  PRI_128 ,Interrupt 128 Priority"
line.long 0x84 "IPR33,Interrupt Priority Register"
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
hexmask.long.byte 0x84 16.--23. 1. "  PRI_134 ,Interrupt 134 Priority"
hexmask.long.byte 0x84 8.--15. 1. "  PRI_133 ,Interrupt 133 Priority"
hexmask.long.byte 0x84 0.--7. 1. "  PRI_132 ,Interrupt 132 Priority"
line.long 0x88 "IPR34,Interrupt Priority Register"
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
hexmask.long.byte 0x88 16.--23. 1. "  PRI_138 ,Interrupt 138 Priority"
hexmask.long.byte 0x88 8.--15. 1. "  PRI_137 ,Interrupt 137 Priority"
hexmask.long.byte 0x88 0.--7. 1. "  PRI_136 ,Interrupt 136 Priority"
line.long 0x8C "IPR35,Interrupt Priority Register"
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
hexmask.long.byte 0x8C 16.--23. 1. "  PRI_142 ,Interrupt 142 Priority"
hexmask.long.byte 0x8C 8.--15. 1. "  PRI_141 ,Interrupt 141 Priority"
hexmask.long.byte 0x8C 0.--7. 1. "  PRI_140 ,Interrupt 140 Priority"
line.long 0x90 "IPR36,Interrupt Priority Register"
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
hexmask.long.byte 0x90 16.--23. 1. "  PRI_146 ,Interrupt 146 Priority"
hexmask.long.byte 0x90 8.--15. 1. "  PRI_145 ,Interrupt 145 Priority"
hexmask.long.byte 0x90 0.--7. 1. "  PRI_144 ,Interrupt 144 Priority"
line.long 0x94 "IPR37,Interrupt Priority Register"
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
hexmask.long.byte 0x94 16.--23. 1. "  PRI_150 ,Interrupt 150 Priority"
hexmask.long.byte 0x94 8.--15. 1. "  PRI_149 ,Interrupt 149 Priority"
hexmask.long.byte 0x94 0.--7. 1. "  PRI_148 ,Interrupt 148 Priority"
line.long 0x98 "IPR38,Interrupt Priority Register"
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
hexmask.long.byte 0x98 16.--23. 1. "  PRI_154 ,Interrupt 154 Priority"
hexmask.long.byte 0x98 8.--15. 1. "  PRI_153 ,Interrupt 153 Priority"
hexmask.long.byte 0x98 0.--7. 1. "  PRI_152 ,Interrupt 152 Priority"
line.long 0x9C "IPR39,Interrupt Priority Register"
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
hexmask.long.byte 0x9C 16.--23. 1. "  PRI_158 ,Interrupt 158 Priority"
hexmask.long.byte 0x9C 8.--15. 1. "  PRI_157 ,Interrupt 157 Priority"
hexmask.long.byte 0x9C 0.--7. 1. "  PRI_156 ,Interrupt 156 Priority"
line.long 0xA0 "IPR40,Interrupt Priority Register"
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
hexmask.long.byte 0xA0 16.--23. 1. "  PRI_162 ,Interrupt 162 Priority"
hexmask.long.byte 0xA0 8.--15. 1. "  PRI_161 ,Interrupt 161 Priority"
hexmask.long.byte 0xA0 0.--7. 1. "  PRI_160 ,Interrupt 160 Priority"
line.long 0xA4 "IPR41,Interrupt Priority Register"
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
hexmask.long.byte 0xA4 16.--23. 1. "  PRI_166 ,Interrupt 166 Priority"
hexmask.long.byte 0xA4 8.--15. 1. "  PRI_165 ,Interrupt 165 Priority"
hexmask.long.byte 0xA4 0.--7. 1. "  PRI_164 ,Interrupt 164 Priority"
line.long 0xA8 "IPR42,Interrupt Priority Register"
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
hexmask.long.byte 0xA8 16.--23. 1. "  PRI_170 ,Interrupt 170 Priority"
hexmask.long.byte 0xA8 8.--15. 1. "  PRI_169 ,Interrupt 169 Priority"
hexmask.long.byte 0xA8 0.--7. 1. "  PRI_168 ,Interrupt 168 Priority"
line.long 0xAC "IPR43,Interrupt Priority Register"
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
hexmask.long.byte 0xAC 16.--23. 1. "  PRI_174 ,Interrupt 174 Priority"
hexmask.long.byte 0xAC 8.--15. 1. "  PRI_173 ,Interrupt 173 Priority"
hexmask.long.byte 0xAC 0.--7. 1. "  PRI_172 ,Interrupt 172 Priority"
line.long 0xB0 "IPR44,Interrupt Priority Register"
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
hexmask.long.byte 0xB0 16.--23. 1. "  PRI_178 ,Interrupt 178 Priority"
hexmask.long.byte 0xB0 8.--15. 1. "  PRI_177 ,Interrupt 177 Priority"
hexmask.long.byte 0xB0 0.--7. 1. "  PRI_176 ,Interrupt 176 Priority"
line.long 0xB4 "IPR45,Interrupt Priority Register"
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
hexmask.long.byte 0xB4 16.--23. 1. "  PRI_182 ,Interrupt 182 Priority"
hexmask.long.byte 0xB4 8.--15. 1. "  PRI_181 ,Interrupt 181 Priority"
hexmask.long.byte 0xB4 0.--7. 1. "  PRI_180 ,Interrupt 180 Priority"
line.long 0xB8 "IPR46,Interrupt Priority Register"
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
hexmask.long.byte 0xB8 16.--23. 1. "  PRI_186 ,Interrupt 186 Priority"
hexmask.long.byte 0xB8 8.--15. 1. "  PRI_185 ,Interrupt 185 Priority"
hexmask.long.byte 0xB8 0.--7. 1. "  PRI_184 ,Interrupt 184 Priority"
line.long 0xBC "IPR47,Interrupt Priority Register"
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
hexmask.long.byte 0xBC 16.--23. 1. "  PRI_190 ,Interrupt 190 Priority"
hexmask.long.byte 0xBC 8.--15. 1. "  PRI_189 ,Interrupt 189 Priority"
hexmask.long.byte 0xBC 0.--7. 1. "  PRI_188 ,Interrupt 188 Priority"
line.long 0xC0 "IPR48,Interrupt Priority Register"
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
hexmask.long.byte 0xC0 16.--23. 1. "  PRI_194 ,Interrupt 194 Priority"
hexmask.long.byte 0xC0 8.--15. 1. "  PRI_193 ,Interrupt 193 Priority"
hexmask.long.byte 0xC0 0.--7. 1. "  PRI_192 ,Interrupt 192 Priority"
line.long 0xC4 "IPR49,Interrupt Priority Register"
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
hexmask.long.byte 0xC4 16.--23. 1. "  PRI_198 ,Interrupt 198 Priority"
hexmask.long.byte 0xC4 8.--15. 1. "  PRI_197 ,Interrupt 197 Priority"
hexmask.long.byte 0xC4 0.--7. 1. "  PRI_196 ,Interrupt 196 Priority"
line.long 0xC8 "IPR50,Interrupt Priority Register"
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
hexmask.long.byte 0xC8 16.--23. 1. "  PRI_202 ,Interrupt 202 Priority"
hexmask.long.byte 0xC8 8.--15. 1. "  PRI_201 ,Interrupt 201 Priority"
hexmask.long.byte 0xC8 0.--7. 1. "  PRI_200 ,Interrupt 200 Priority"
line.long 0xCC "IPR51,Interrupt Priority Register"
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
hexmask.long.byte 0xCC 16.--23. 1. "  PRI_206 ,Interrupt 206 Priority"
hexmask.long.byte 0xCC 8.--15. 1. "  PRI_205 ,Interrupt 205 Priority"
hexmask.long.byte 0xCC 0.--7. 1. "  PRI_204 ,Interrupt 204 Priority"
line.long 0xD0 "IPR52,Interrupt Priority Register"
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
hexmask.long.byte 0xD0 16.--23. 1. "  PRI_210 ,Interrupt 210 Priority"
hexmask.long.byte 0xD0 8.--15. 1. "  PRI_209 ,Interrupt 209 Priority"
hexmask.long.byte 0xD0 0.--7. 1. "  PRI_208 ,Interrupt 208 Priority"
line.long 0xD4 "IPR53,Interrupt Priority Register"
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
hexmask.long.byte 0xD4 16.--23. 1. "  PRI_214 ,Interrupt 214 Priority"
hexmask.long.byte 0xD4 8.--15. 1. "  PRI_213 ,Interrupt 213 Priority"
hexmask.long.byte 0xD4 0.--7. 1. "  PRI_212 ,Interrupt 212 Priority"
line.long 0xD8 "IPR54,Interrupt Priority Register"
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
hexmask.long.byte 0xD8 16.--23. 1. "  PRI_218 ,Interrupt 218 Priority"
hexmask.long.byte 0xD8 8.--15. 1. "  PRI_217 ,Interrupt 217 Priority"
hexmask.long.byte 0xD8 0.--7. 1. "  PRI_216 ,Interrupt 216 Priority"
line.long 0xDC "IPR55,Interrupt Priority Register"
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
hexmask.long.byte 0xDC 16.--23. 1. "  PRI_222 ,Interrupt 222 Priority"
hexmask.long.byte 0xDC 8.--15. 1. "  PRI_221 ,Interrupt 221 Priority"
hexmask.long.byte 0xDC 0.--7. 1. "  PRI_220 ,Interrupt 220 Priority"
line.long 0xE0 "IPR56,Interrupt Priority Register"
hexmask.long.byte 0xE0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority"
hexmask.long.byte 0xE0 16.--23. 1. "  PRI_226 ,Interrupt 226 Priority"
hexmask.long.byte 0xE0 8.--15. 1. "  PRI_225 ,Interrupt 225 Priority"
hexmask.long.byte 0xE0 0.--7. 1. "  PRI_224 ,Interrupt 224 Priority"
line.long 0xE4 "IPR57,Interrupt Priority Register"
hexmask.long.byte 0xE4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority"
hexmask.long.byte 0xE4 16.--23. 1. "  PRI_230 ,Interrupt 230 Priority"
hexmask.long.byte 0xE4 8.--15. 1. "  PRI_229 ,Interrupt 229 Priority"
hexmask.long.byte 0xE4 0.--7. 1. "  PRI_228 ,Interrupt 228 Priority"
line.long 0xE8 "IPR58,Interrupt Priority Register"
hexmask.long.byte 0xE8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority"
hexmask.long.byte 0xE8 16.--23. 1. "  PRI_234 ,Interrupt 234 Priority"
hexmask.long.byte 0xE8 8.--15. 1. "  PRI_233 ,Interrupt 233 Priority"
hexmask.long.byte 0xE8 0.--7. 1. "  PRI_232 ,Interrupt 232 Priority"
line.long 0xEC "IPR59,Interrupt Priority Register"
hexmask.long.byte 0xEC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority"
hexmask.long.byte 0xEC 16.--23. 1. "  PRI_238 ,Interrupt 238 Priority"
hexmask.long.byte 0xEC 8.--15. 1. "  PRI_237 ,Interrupt 237 Priority"
hexmask.long.byte 0xEC 0.--7. 1. "  PRI_236 ,Interrupt 236 Priority"
else
hgroup.long 0x400++0xEF
hide.long 0x0 "IPR0,Interrupt Priority Register"
hide.long 0x4 "IPR1,Interrupt Priority Register"
hide.long 0x8 "IPR2,Interrupt Priority Register"
hide.long 0xC "IPR3,Interrupt Priority Register"
hide.long 0x10 "IPR4,Interrupt Priority Register"
hide.long 0x14 "IPR5,Interrupt Priority Register"
hide.long 0x18 "IPR6,Interrupt Priority Register"
hide.long 0x1C "IPR7,Interrupt Priority Register"
hide.long 0x20 "IPR8,Interrupt Priority Register"
hide.long 0x24 "IPR9,Interrupt Priority Register"
hide.long 0x28 "IPR10,Interrupt Priority Register"
hide.long 0x2C "IPR11,Interrupt Priority Register"
hide.long 0x30 "IPR12,Interrupt Priority Register"
hide.long 0x34 "IPR13,Interrupt Priority Register"
hide.long 0x38 "IPR14,Interrupt Priority Register"
hide.long 0x3C "IPR15,Interrupt Priority Register"
hide.long 0x40 "IPR16,Interrupt Priority Register"
hide.long 0x44 "IPR17,Interrupt Priority Register"
hide.long 0x48 "IPR18,Interrupt Priority Register"
hide.long 0x4C "IPR19,Interrupt Priority Register"
hide.long 0x50 "IPR20,Interrupt Priority Register"
hide.long 0x54 "IPR21,Interrupt Priority Register"
hide.long 0x58 "IPR22,Interrupt Priority Register"
hide.long 0x5C "IPR23,Interrupt Priority Register"
hide.long 0x60 "IPR24,Interrupt Priority Register"
hide.long 0x64 "IPR25,Interrupt Priority Register"
hide.long 0x68 "IPR26,Interrupt Priority Register"
hide.long 0x6C "IPR27,Interrupt Priority Register"
hide.long 0x70 "IPR28,Interrupt Priority Register"
hide.long 0x74 "IPR29,Interrupt Priority Register"
hide.long 0x78 "IPR30,Interrupt Priority Register"
hide.long 0x7C "IPR31,Interrupt Priority Register"
hide.long 0x80 "IPR32,Interrupt Priority Register"
hide.long 0x84 "IPR33,Interrupt Priority Register"
hide.long 0x88 "IPR34,Interrupt Priority Register"
hide.long 0x8C "IPR35,Interrupt Priority Register"
hide.long 0x90 "IPR36,Interrupt Priority Register"
hide.long 0x94 "IPR37,Interrupt Priority Register"
hide.long 0x98 "IPR38,Interrupt Priority Register"
hide.long 0x9C "IPR39,Interrupt Priority Register"
hide.long 0xA0 "IPR40,Interrupt Priority Register"
hide.long 0xA4 "IPR41,Interrupt Priority Register"
hide.long 0xA8 "IPR42,Interrupt Priority Register"
hide.long 0xAC "IPR43,Interrupt Priority Register"
hide.long 0xB0 "IPR44,Interrupt Priority Register"
hide.long 0xB4 "IPR45,Interrupt Priority Register"
hide.long 0xB8 "IPR46,Interrupt Priority Register"
hide.long 0xBC "IPR47,Interrupt Priority Register"
hide.long 0xC0 "IPR48,Interrupt Priority Register"
hide.long 0xC4 "IPR49,Interrupt Priority Register"
hide.long 0xC8 "IPR50,Interrupt Priority Register"
hide.long 0xCC "IPR51,Interrupt Priority Register"
hide.long 0xD0 "IPR52,Interrupt Priority Register"
hide.long 0xD4 "IPR53,Interrupt Priority Register"
hide.long 0xD8 "IPR54,Interrupt Priority Register"
hide.long 0xDC "IPR55,Interrupt Priority Register"
hide.long 0xE0 "IPR56,Interrupt Priority Register"
hide.long 0xE4 "IPR57,Interrupt Priority Register"
hide.long 0xE8 "IPR58,Interrupt Priority Register"
hide.long 0xEC "IPR59,Interrupt Priority Register"
endif
tree.end
width 0x0b
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
sif CORENAME()=="CORTEXM4F"
tree "Floating-point Unit (FPU)"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 8.
group.long 0xF34++0x0B
line.long 0x00 "FPCCR,Floating-Point Context Control Register"
bitfld.long 0x00 31. " ASPEN        ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled"
bitfld.long 0x00 30. "                      LSPEN    ,Enables lazy context save of FP state" "Disabled,Enabled"
bitfld.long 0x00 8. "       MONRDY  ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able"
textline "                 "
bitfld.long 0x00 6. " BFRDY        ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able"
bitfld.long 0x00 5. "                      MMRDY    ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able"
bitfld.long 0x00 4. "       HFRDY   ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able"
textline "                 "
bitfld.long 0x00 3. " THREAD       ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread"
bitfld.long 0x00 1. "                       USER     ,Indicates the privilege level of the software executing" "Privileged,Unprivileged"
bitfld.long 0x00 0. "   LSPACT  ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active"
line.long 0x04 "FPCAR,Floating-Point Context Address Register"
hexmask.long 0x04 3.--31. 0x8 " ADDRESS      ,The location of the unpopulated floating-point register space allocated on an exception stack frame"
line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register"
bitfld.long 0x08 26. " AHP          ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative"
bitfld.long 0x08 25. "                 DN       ,Default value for FPSCR.DN" "NaN operands,Any operation"
bitfld.long 0x08 24. "  FZ      ,Default value for FPSCR.FZ" "No Flush mode,Flush mode"
textline "                 "
bitfld.long 0x08 22.--23. " RMODE        ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero"
rgroup.long 0xF40++0x07
line.long 0x00 "MVFR0,Media and FP Feature Register 0"
bitfld.long 0x00 28.--31. " FPRNDMOD     ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..."
bitfld.long 0x00 24.--27. "                 SRTERR   ,Indicates the hardware support for FP short vectors" "Not supported,?..."
bitfld.long 0x00 20.--23. "  SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..."
textline "                 "
bitfld.long 0x00 16.--19. " DIV          ,Indicates the hardware support for FP divide operations" ",Supported,?..."
bitfld.long 0x00 12.--15. "                     FPEXTRP  ,Indicates whether the FP hardware implementation supports exception trapping" "Not supported,?..."
bitfld.long 0x00 8.--11. "  DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..."
textline "                 "
bitfld.long 0x00 4.--7. " SNGLPREC     ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..."
bitfld.long 0x00 0.--3. "                     A_SIMD   ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..."
line.long 0x04 "MVFR1,Media and FP Feature Register 1"
bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..."
bitfld.long 0x04 24.--27. "                     FP_HPFP  ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..."
textline "                 "
bitfld.long 0x04 4.--7. " D_NAN        ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..."
bitfld.long 0x04 0.--3. "               FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Full denorm. num. arit.,?..."
width 0xB
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
endif
tree "Debug"
tree "Core Debug"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 7.
group.long 0xD30++0x03
line.long 0x00 "DFSR,Debug Fault Status Register"
eventfld.long 0x00 4. " EXTERNAL     ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated"
eventfld.long 0x00 3. "  VCATCH     ,Indicates triggering of a Vector catch" "Not triggered,Triggered"
eventfld.long 0x00 2. "  DWTTRAP    ,Indicates a debug event generated by the DWT" "Not generated,Generated"
newline
eventfld.long 0x00 1. " BKPT         ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated"
eventfld.long 0x00 0. "  HALTED     ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated"
newline
hgroup.long 0xDF0++0x03
hide.long 0x00 "DHCSR,Debug Halting Control and Status Register"
in
newline
wgroup.long 0xDF4++0x03
line.long 0x00 "DCRSR,Debug Core Register Selector Register"
bitfld.long 0x00 16. " REGWNR       ,Register Read/Write" "Read,Write"
hexmask.long.byte 0x00 0.--6. 1. "          REGSEL     ,Specifies the ARM core register or special-purpose register or Floating-point extension register"
group.long 0xDF8++0x03
line.long 0x00 "DCRDR,Debug Core Register Data Register"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000)
group.long 0xDFC++0x03
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
bitfld.long 0x00 24. " TRCENA       ,Global enable for all DWT and ITM features" "Disabled,Enabled"
bitfld.long 0x00 19. "       MON_REQ    ,DebugMonitor semaphore bit" "0,1"
bitfld.long 0x00 18. "              MON_STEP   ,Setting this bit to 1 makes the step request pending" "No step,Step"
newline
bitfld.long 0x00 17. " MON_PEND     ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
bitfld.long 0x00 16. "    MON_EN     ,Enable the DebugMonitor exception" "Disabled,Enabled"
bitfld.long 0x00 10. "       VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " VC_INTERR    ,Enable halting debug trap" "Disabled,Enabled"
bitfld.long 0x00 8. "       VC_BUSERR  ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
bitfld.long 0x00 7. "       VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " VC_CHKERR    ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
bitfld.long 0x00 5. "       VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
bitfld.long 0x00 4. "       VC_MMERR   ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
else
group.long 0xDFC++0x03
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
bitfld.long 0x00 24. " TRCENA       ,Global enable for all DWT and ITM features" "Disabled,Enabled"
bitfld.long 0x00 19. "       MON_REQ    ,DebugMonitor semaphore bit" "0,1"
newline
bitfld.long 0x00 17. " MON_PEND     ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
bitfld.long 0x00 16. "    MON_EN     ,Enable the DebugMonitor exception" "Disabled,Enabled"
bitfld.long 0x00 10. "       VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " VC_INTERR    ,Enable halting debug trap" "Disabled,Enabled"
bitfld.long 0x00 8. "       VC_BUSERR  ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
bitfld.long 0x00 7. "       VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " VC_CHKERR    ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
bitfld.long 0x00 5. "       VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
bitfld.long 0x00 4. "       VC_MMERR   ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
endif
width 0x0B
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Flash Patch and Breakpoint Unit (FPB)"
sif COMPonent.AVAILABLE("FPB")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))
width 10.
group.long 0x00++0x07
line.long 0x00 "FP_CTRL,Flash Patch Control Register"
bitfld.long 0x00 28.--31. " REV     ,Flash Patch Breakpoint architecture revision" "Version 1,Version 2,?..."
rbitfld.long 0x00 4.--7. 12.--14. "     NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127"
bitfld.long 0x00 1. "  KEY   ,Key Field" "Low,High"
bitfld.long 0x00 0. "      ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled"
textline ""
line.long 0x04 "FP_REMAP,Flash Patch Remap Register"
bitfld.long 0x04 29. " RMPSPT  ,Indicates whether the FPB unit supports flash patch remap" "Not supported,SRAM region"
hexmask.long.tbyte 0x04 5.--28. 0x20 "               REMAP ,Remap Base Address Field"
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x8++0x03
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00)
group.long 0x8++0x03
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x8++0x03
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0xC++0x03
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00)
group.long 0xC++0x03
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0xC++0x03
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x10++0x03
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00)
group.long 0x10++0x03
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x10++0x03
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x14++0x03
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00)
group.long 0x14++0x03
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x14++0x03
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x18++0x03
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00)
group.long 0x18++0x03
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x18++0x03
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x1C++0x03
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00)
group.long 0x1C++0x03
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x1C++0x03
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x20++0x03
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00)
group.long 0x20++0x03
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x20++0x03
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x24++0x03
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00)
group.long 0x24++0x03
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x24++0x03
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
width 6.
tree "CoreSight Identification Registers"
rgroup.long 0xFE0++0x0F
line.long 0x00 "PID0,Peripheral ID0"
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
line.long 0x04 "PID1,Peripheral ID1"
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
hexmask.long.byte 0x04 0.--3. 1. "  Part_Num[11:8] ,Part Number bits[11:8]"
line.long 0x08 "PID2,Peripheral ID2"
hexmask.long.byte 0x08 4.--7. 1. " Revision      ,Revision"
bitfld.long 0x08 3. "  JEDEC          ,JEDEC assigned ID fields" "0,JEDEC"
hexmask.long.byte 0x08 0.--2. 1. "  JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
line.long 0x0c "PID3,Peripheral ID3"
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd        ,Minor revision field"
hexmask.long.byte 0x0C 0.--3. 1. "  CMB            ,Customer-modified block"
rgroup.long 0xFD0++0x03
line.long 0x00 "PID4,Peripheral Identification Register 4"
hexmask.long.byte 0x00 4.--7. 1. " Count         ,4KB count"
hexmask.long.byte 0x00 0.--3. 1. "  JEP106_CC      ,JEP106 continuation code"
rgroup.long 0xFF0++0x0F
line.long 0x00 "CID0,Component ID0 (Preamble)"
line.long 0x04 "CID1,Component ID1"
hexmask.long.byte 0x04 4.--7. 1. " CC            ,Component Class"
hexmask.long.byte 0x04 0.--3. 1. "  Preamble       ,Preamble"
line.long 0x08 "CID2,Component ID2"
line.long 0x0c "CID3,Component ID3"
tree.end
width 0xB
else
newline
textline "FPB component base address not specified"
newline
endif
tree.end
tree "Data Watchpoint and Trace Unit (DWT)"
sif COMPonent.AVAILABLE("DWT")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))
width 15.
group.long 0x00++0x1B
line.long 0x00 "DWT_CTRL,Control Register"
rbitfld.long 0x00 28.--31. " NUMCOMP     ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 27. "             NOTRCPKT   ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported"
rbitfld.long 0x00 26. "  NOEXTTRIG   ,Shows whether the implementation includes external match signals" "Supported,Not supported"
textline "                        "
rbitfld.long 0x00 25. " NOCYCCNT    ,Shows whether the implementation supports a cycle counter" "Supported,Not supported"
rbitfld.long 0x00 24. "  NOPRFCNT   ,Shows whether the implementation supports the profiling counters" "Supported,Not supported"
bitfld.long 0x00 22. "  CYCEVTENA   ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 21. " FOLDEVTENA  ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled"
bitfld.long 0x00 20. "       LSUEVTENA  ,Enables generation of the LSU counter overflow event" "Disabled,Enabled"
bitfld.long 0x00 19. "       SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 18. " EXCEVTENA   ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled"
bitfld.long 0x00 17. "       CPIEVTENA  ,Enables generation of the CPI counter overflow event" "Disabled,Enabled"
bitfld.long 0x00 16. "       EXCTRCENA   ,Enables generation of exception trace" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 12. " PCSAMPLEENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled"
bitfld.long 0x00 10.--11. "       SYNCTAP    ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]"
bitfld.long 0x00 9. "     CYCTAP      ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]"
textline "                        "
bitfld.long 0x00 5.--8. " POSTINIT    ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 1.--4. "             POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "             CYCCNTENA   ,Enables CYCCNT" "Disabled,Enabled"
line.long 0x04 "DWT_CYCCNT,Cycle Count Register"
line.long 0x08 "DWT_CPICNT,CPI Count Register"
hexmask.long.byte 0x08 0.--7. 1. " CPICNT      ,The base CPI counter"
line.long 0x0c "DWT_EXCCNT,Exception Overhead Count Register"
hexmask.long.byte 0x0c 0.--7. 1. " EXCCNT      ,The exception overhead counter"
line.long 0x10 "DWT_SLEEPCNT,Sleep Count Register"
hexmask.long.byte 0x10 0.--7. 1. " SLEEPCNT    ,Sleep Counter"
line.long 0x14 "DWT_LSUCNT,LSU Count Register"
hexmask.long.byte 0x14 0.--7. 1. " LSUCNT      ,Load-store counter"
line.long 0x18 "DWT_FOLDCNT,Folded-instruction Count Register"
hexmask.long.byte 0x18 0.--7. 1. " FOLDCNT     ,Folded-instruction counter"
rgroup.long 0x1C++0x03
line.long 0x00 "DWT_PCSR,Program Counter Sample register"
textline "                        "
group.long 0x20++0x07
line.long 0x00 "DWT_COMP0,DWT Comparator Register 0"
line.long 0x04 "DWT_MASK0,DWT Mask Registers 0"
bitfld.long 0x04 0.--4. " MASK        ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x20)
group.long 0x28++0x03
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 7. " CYCMATCH    ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
bitfld.long 0x00 5. "    EMITRANGE  ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "       FUNCTION   ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x00)
group.long 0x28++0x03
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 7. " CYCMATCH    ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
bitfld.long 0x00 5. "    EMITRANGE  ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "       FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x180)==0x80)
group.long 0x28++0x03
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 7. " CYCMATCH    ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
bitfld.long 0x00 5. "    EMITRANGE  ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "       FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet,UNPREDICTABLE,UNPREDICTABLE,Generate watchpoint debug event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,CMPMATCH[N] event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
else
group.long 0x28++0x03
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 7. " CYCMATCH    ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
bitfld.long 0x00 5. "    EMITRANGE  ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "       FUNCTION   ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
endif
group.long (0x30)++0x07
line.long 0x00 "DWT_COMP1,DWT Comparator Register 1"
line.long 0x04 "DWT_MASK1,DWT Mask Registers 1"
bitfld.long 0x04 0.--4. " MASK        ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x20)
group.long (0x30+0x08)++0x03
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x00)
group.long (0x30+0x08)++0x03
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
else
group.long (0x30+0x08)++0x03
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
endif
group.long (0x40)++0x07
line.long 0x00 "DWT_COMP2,DWT Comparator Register 2"
line.long 0x04 "DWT_MASK2,DWT Mask Registers 2"
bitfld.long 0x04 0.--4. " MASK        ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x20)
group.long (0x40+0x08)++0x03
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x00)
group.long (0x40+0x08)++0x03
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
else
group.long (0x40+0x08)++0x03
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
endif
group.long (0x50)++0x07
line.long 0x00 "DWT_COMP3,DWT Comparator Register 3"
line.long 0x04 "DWT_MASK3,DWT Mask Registers 3"
bitfld.long 0x04 0.--4. " MASK        ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x20)
group.long (0x50+0x08)++0x03
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x00)
group.long (0x50+0x08)++0x03
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
else
group.long (0x50+0x08)++0x03
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
endif
width 6.
tree "CoreSight Identification Registers"
rgroup.long 0xFE0++0x0F
line.long 0x00 "PID0,Peripheral ID0"
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
line.long 0x04 "PID1,Peripheral ID1"
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
hexmask.long.byte 0x04 0.--3. 1. "  Part_Num[11:8] ,Part Number bits[11:8]"
line.long 0x08 "PID2,Peripheral ID2"
hexmask.long.byte 0x08 4.--7. 1. " Revision      ,Revision"
bitfld.long 0x08 3. "  JEDEC          ,JEDEC assigned ID fields" "0,JEDEC"
hexmask.long.byte 0x08 0.--2. 1. "  JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
line.long 0x0c "PID3,Peripheral ID3"
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd        ,Minor revision field"
hexmask.long.byte 0x0C 0.--3. 1. "  CMB            ,Customer-modified block"
rgroup.long 0xFD0++0x03
line.long 0x00 "PID4,Peripheral Identification Register 4"
hexmask.long.byte 0x00 4.--7. 1. " Count         ,4KB count"
hexmask.long.byte 0x00 0.--3. 1. "  JEP106_CC      ,JEP106 continuation code"
rgroup.long 0xFF0++0x0F
line.long 0x00 "CID0,Component ID0 (Preamble)"
line.long 0x04 "CID1,Component ID1"
hexmask.long.byte 0x04 4.--7. 1. " CC            ,Component Class"
hexmask.long.byte 0x04 0.--3. 1. "  Preamble       ,Preamble"
line.long 0x08 "CID2,Component ID2"
line.long 0x0c "CID3,Component ID3"
tree.end
width 0x0B
else
newline
textline "DWT component base address not specified"
newline
endif
tree.end
tree.end
AUTOINDENT.POP
tree.end
autoindent.on center tree
tree "ADC"
tree "ADC0"
base ad:0x4003B000
rgroup.long 0x00++0x03
line.long 0x00 "ADC0_ADC_VERID,ADC version ID Register(ADC_VERID)"
bitfld.long 0x00 28.--31. "MAJOR,Major Version Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "MINOR,Minor Version Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 16.--23. 1. "FIFO_NUM,The number of FIFO"
hexmask.long.word 0x00 2.--15. 1. "RSVD_15_2,Reserved"
bitfld.long 0x00 1. "CALOFSI,Calibration Function Implemented" "0,1"
bitfld.long 0x00 0. "DIFFEN,Differential Supported" "0,1"
rgroup.long 0x04++0x03
line.long 0x00 "ADC0_ADC_PARAM,ADC PARAMETER Register(ADC_PARAM)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "FIFO_SIZE,FIFO Depth field"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x08++0x03
line.long 0x00 "ADC0_ADC_CTRL,ADC Control Register(ADC_CTRL)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 22. "TS_EN,temperature sensor enable" "0,1"
hexmask.long.word 0x00 11.--21. 1. "STABLE_T,adc stable time"
bitfld.long 0x00 10. "IREF_SEL,iref source select" "0,1"
bitfld.long 0x00 7.--9. "LMD,loop mode depth" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "MODE1_RST,mode1 loop reset bit" "0,1"
newline
bitfld.long 0x00 5. "TRIG_MODE,Trigger mode" "0,1"
bitfld.long 0x00 4. "TRIG_MODE_ENABLE,trig mode enable" "0,1"
bitfld.long 0x00 3. "DOZEN,Doze Enable" "0,1"
bitfld.long 0x00 2. "RST,Software Reset" "0,1"
bitfld.long 0x00 1. "CAL_REQ,Auto-Calibration Request" "0,1"
bitfld.long 0x00 0. "ADC_EN,ADC Enable" "0,1"
rgroup.long 0x0C++0x03
line.long 0x00 "ADC0_ADC_STAT,ADC STATUS Register(ADC_STAT)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,Reserved"
bitfld.long 0x00 9. "TC_ERR,trigger confict err" "0,1"
bitfld.long 0x00 8. "LSI,loop state idle" "0,1"
bitfld.long 0x00 7. "ADC_ACTIVE,ADC Active" "0,1"
bitfld.long 0x00 6. "CAL_RDY,Calibration Ready" "0,1"
bitfld.long 0x00 5. "RDY,Result FIFO Ready Flag" "0,1"
newline
bitfld.long 0x00 4. "DMA_REQ,DMA Request" "0,1"
bitfld.long 0x00 3. "CMP_INT,Compare Interrupt" "0,1"
bitfld.long 0x00 2. "TCOMP_INT,Complete Interrupt" "0,1"
bitfld.long 0x00 1. "FOF,Result FIFO Overflow Flag" "0,1"
bitfld.long 0x00 0. "FWM_INT,FIFO Watermark Interrupt" "0,1"
group.long 0x10++0x03
line.long 0x00 "ADC0_ADC_IE,ADC Interrupt Enable Register(ADC_IE)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 5. "ERR_INT_IE,trigger confict err Interrupt Enable" "0,1"
bitfld.long 0x00 4. "FWMDE,FIFO Watermark DMA Enable" "0,1"
bitfld.long 0x00 3. "CMP_IE,Compare Interrupt Enable" "0,1"
bitfld.long 0x00 2. "TCOM_IE,Trigger Completion Interrupt Enable" "0,1"
bitfld.long 0x00 1. "FOF_IE,Result FIFO Overflow Interrupt Enable" "0,1"
newline
bitfld.long 0x00 0. "FWM_IE,FIFO Watermark Interrupt Enable" "0,1"
group.long 0x14++0x03
line.long 0x00 "ADC0_ADC_CFG,ADC Configure information(ADC_CFG)"
hexmask.long.word 0x00 22.--31. 1. "STS,Sample Time Select"
bitfld.long 0x00 19.--21. "AVGS,Hardware Average Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 17.--18. "RES,Resolution Select" "0,1,2,3"
bitfld.long 0x00 16. "REF_SEL,Reference Select" "0,1"
bitfld.long 0x00 15. "HWT_EN,HardWareTrigger Enable" "0,1"
bitfld.long 0x00 12.--14. "CMPS,Compare Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 11. "CTYPE,Conversion Type" "0,1"
bitfld.long 0x00 8.--10. "RSVD_10_8,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--7. "CHSELN,Input Channel-N Select" "0,1,2,3"
bitfld.long 0x00 1.--5. "CHSELP,Input Channel-P Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0. "DIFF_MODE,Differential Mode Select" "0,1"
group.long 0x18++0x03
line.long 0x00 "ADC0_ADC_CV,ADC Compare Value Register(ADC_CV)"
bitfld.long 0x00 28.--31. "RSVD_31_28,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 16.--27. 1. "CVH,Compare Value High"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "CVL,Compare Value Low"
group.long 0x1C++0x03
line.long 0x00 "ADC0_ADC_TRIM,ADC Trim Value Register(ADC_TRIM)"
bitfld.long 0x00 31. "ADC_TRIM_EN,ADC Trim Write Enable" "0,1"
hexmask.long.tbyte 0x00 11.--30. 1. "RSVD_30_11,Reserved"
bitfld.long 0x00 7.--10. "ADC_KTRIM,ADC KTRIM Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "ADC_BTRIM_POLAR,ADC BTRIM POLAR Value" "0,1"
bitfld.long 0x00 0.--5. "ADC_BTRIM,ADC BTRIM Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0x20++0x03
line.long 0x00 "ADC0_ADC_DATA_RD,ADC Data Register(ADC_DATA_RD)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
hexmask.long.tbyte 0x00 0.--16. 1. "ADC_DATA_RD,conversion result"
group.long 0x24++0x03
line.long 0x00 "ADC0_ADC_FCTRL,ADC FIFO Configuration Register(ADC_FCTRL)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,Reserved"
bitfld.long 0x00 20.--24. "FDRD,FIFO Depth Redefine" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--19. "FWMARK,FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 0.--4. "FCOUNT,FIFO Counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x28++0x03
line.long 0x00 "ADC0_ADC_SWTRIG,ADC SoftWareTrigger Register(ADC_SWTRIG)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "ADC_SWTRIG,ADC SoftWare Trigger" "0,1"
rgroup.long 0x2C++0x03
line.long 0x00 "ADC0_ADC_CAL_VAL,ADC Calibration Value(ADC_CAL_VAL)"
hexmask.long.tbyte 0x00 13.--31. 1. "RSVD_31_13,Reserved"
hexmask.long.word 0x00 0.--12. 1. "ADC_CAL_VAL,ADC Calibration Value"
group.long 0x30++0x03
line.long 0x00 "ADC0_ADC_CMD_BUFF0,ADC Commond Buff Register0(ADC_CMD_BUFF0)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 29. "CMD3_INT_EN,cmd3 complete int enable" "0,1"
bitfld.long 0x00 24.--28. "CMD3,cmd_buff3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 21. "CMD2_INT_EN,cmd2 complete int enable" "0,1"
bitfld.long 0x00 16.--20. "CMD2,cmd_buff2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "CMD1_INT_EN,cmd1 complete int enable" "0,1"
bitfld.long 0x00 8.--12. "CMD1,cmd_buff1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "CMD0_INT_EN,cmd0 complete int enable" "0,1"
bitfld.long 0x00 0.--4. "CMD0,cmd_buff0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x34++0x03
line.long 0x00 "ADC0_ADC_CMD_BUFF1,ADC Command Buff Register1(ADC_CMD_BUFF1)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
bitfld.long 0x00 13. "CMD5_INT_EN,cmd5 complete int enable" "0,1"
bitfld.long 0x00 8.--12. "CMD5,cmd_buff5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "CMD4_INT_EN,cmd4 complete int enable" "0,1"
bitfld.long 0x00 0.--4. "CMD4,cmd_buff4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x38++0x03
line.long 0x00 "ADC0_ADC_GAIN,ADC gain trim register"
bitfld.long 0x00 28.--31. "RSVD_31_28,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 16.--27. 1. "GAIN1,gain trim1"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "GAIN0,gain trim0"
tree.end
tree "ADC1"
base ad:0x40027000
rgroup.long 0x00++0x03
line.long 0x00 "ADC1_ADC_VERID,ADC version ID Register(ADC_VERID)"
bitfld.long 0x00 28.--31. "MAJOR,Major Version Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "MINOR,Minor Version Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 16.--23. 1. "FIFO_NUM,The number of FIFO"
hexmask.long.word 0x00 2.--15. 1. "RSVD_15_2,Reserved"
bitfld.long 0x00 1. "CALOFSI,Calibration Function Implemented" "0,1"
bitfld.long 0x00 0. "DIFFEN,Differential Supported" "0,1"
rgroup.long 0x04++0x03
line.long 0x00 "ADC1_ADC_PARAM,ADC PARAMETER Register(ADC_PARAM)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "FIFO_SIZE,FIFO Depth field"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x08++0x03
line.long 0x00 "ADC1_ADC_CTRL,ADC Control Register(ADC_CTRL)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 22. "TS_EN,temperature sensor enable" "0,1"
hexmask.long.word 0x00 11.--21. 1. "STABLE_T,adc stable time"
bitfld.long 0x00 10. "IREF_SEL,iref source select" "0,1"
bitfld.long 0x00 7.--9. "LMD,loop mode depth" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "MODE1_RST,mode1 loop reset bit" "0,1"
newline
bitfld.long 0x00 5. "TRIG_MODE,Trigger mode" "0,1"
bitfld.long 0x00 4. "TRIG_MODE_ENABLE,trig mode enable" "0,1"
bitfld.long 0x00 3. "DOZEN,Doze Enable" "0,1"
bitfld.long 0x00 2. "RST,Software Reset" "0,1"
bitfld.long 0x00 1. "CAL_REQ,Auto-Calibration Request" "0,1"
bitfld.long 0x00 0. "ADC_EN,ADC Enable" "0,1"
rgroup.long 0x0C++0x03
line.long 0x00 "ADC1_ADC_STAT,ADC STATUS Register(ADC_STAT)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,Reserved"
bitfld.long 0x00 9. "TC_ERR,trigger confict err" "0,1"
bitfld.long 0x00 8. "LSI,loop state idle" "0,1"
bitfld.long 0x00 7. "ADC_ACTIVE,ADC Active" "0,1"
bitfld.long 0x00 6. "CAL_RDY,Calibration Ready" "0,1"
bitfld.long 0x00 5. "RDY,Result FIFO Ready Flag" "0,1"
newline
bitfld.long 0x00 4. "DMA_REQ,DMA Request" "0,1"
bitfld.long 0x00 3. "CMP_INT,Compare Interrupt" "0,1"
bitfld.long 0x00 2. "TCOMP_INT,Complete Interrupt" "0,1"
bitfld.long 0x00 1. "FOF,Result FIFO Overflow Flag" "0,1"
bitfld.long 0x00 0. "FWM_INT,FIFO Watermark Interrupt" "0,1"
group.long 0x10++0x03
line.long 0x00 "ADC1_ADC_IE,ADC Interrupt Enable Register(ADC_IE)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 5. "ERR_INT_IE,trigger confict err Interrupt Enable" "0,1"
bitfld.long 0x00 4. "FWMDE,FIFO Watermark DMA Enable" "0,1"
bitfld.long 0x00 3. "CMP_IE,Compare Interrupt Enable" "0,1"
bitfld.long 0x00 2. "TCOM_IE,Trigger Completion Interrupt Enable" "0,1"
bitfld.long 0x00 1. "FOF_IE,Result FIFO Overflow Interrupt Enable" "0,1"
newline
bitfld.long 0x00 0. "FWM_IE,FIFO Watermark Interrupt Enable" "0,1"
group.long 0x14++0x03
line.long 0x00 "ADC1_ADC_CFG,ADC Configure information(ADC_CFG)"
hexmask.long.word 0x00 22.--31. 1. "STS,Sample Time Select"
bitfld.long 0x00 19.--21. "AVGS,Hardware Average Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 17.--18. "RES,Resolution Select" "0,1,2,3"
bitfld.long 0x00 16. "REF_SEL,Reference Select" "0,1"
bitfld.long 0x00 15. "HWT_EN,HardWareTrigger Enable" "0,1"
bitfld.long 0x00 12.--14. "CMPS,Compare Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 11. "CTYPE,Conversion Type" "0,1"
bitfld.long 0x00 8.--10. "RSVD_10_8,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--7. "CHSELN,Input Channel-N Select" "0,1,2,3"
bitfld.long 0x00 1.--5. "CHSELP,Input Channel-P Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0. "DIFF_MODE,Differential Mode Select" "0,1"
group.long 0x18++0x03
line.long 0x00 "ADC1_ADC_CV,ADC Compare Value Register(ADC_CV)"
bitfld.long 0x00 28.--31. "RSVD_31_28,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 16.--27. 1. "CVH,Compare Value High"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "CVL,Compare Value Low"
group.long 0x1C++0x03
line.long 0x00 "ADC1_ADC_TRIM,ADC Trim Value Register(ADC_TRIM)"
bitfld.long 0x00 31. "ADC_TRIM_EN,ADC Trim Write Enable" "0,1"
hexmask.long.tbyte 0x00 11.--30. 1. "RSVD_30_11,Reserved"
bitfld.long 0x00 7.--10. "ADC_KTRIM,ADC KTRIM Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "ADC_BTRIM_POLAR,ADC BTRIM POLAR Value" "0,1"
bitfld.long 0x00 0.--5. "ADC_BTRIM,ADC BTRIM Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0x20++0x03
line.long 0x00 "ADC1_ADC_DATA_RD,ADC Data Register(ADC_DATA_RD)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
hexmask.long.tbyte 0x00 0.--16. 1. "ADC_DATA_RD,conversion result"
group.long 0x24++0x03
line.long 0x00 "ADC1_ADC_FCTRL,ADC FIFO Configuration Register(ADC_FCTRL)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,Reserved"
bitfld.long 0x00 20.--24. "FDRD,FIFO Depth Redefine" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--19. "FWMARK,FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 0.--4. "FCOUNT,FIFO Counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x28++0x03
line.long 0x00 "ADC1_ADC_SWTRIG,ADC SoftWareTrigger Register(ADC_SWTRIG)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "ADC_SWTRIG,ADC SoftWare Trigger" "0,1"
rgroup.long 0x2C++0x03
line.long 0x00 "ADC1_ADC_CAL_VAL,ADC Calibration Value(ADC_CAL_VAL)"
hexmask.long.tbyte 0x00 13.--31. 1. "RSVD_31_13,Reserved"
hexmask.long.word 0x00 0.--12. 1. "ADC_CAL_VAL,ADC Calibration Value"
group.long 0x30++0x03
line.long 0x00 "ADC1_ADC_CMD_BUFF0,ADC Commond Buff Register0(ADC_CMD_BUFF0)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 29. "CMD3_INT_EN,cmd3 complete int enable" "0,1"
bitfld.long 0x00 24.--28. "CMD3,cmd_buff3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 21. "CMD2_INT_EN,cmd2 complete int enable" "0,1"
bitfld.long 0x00 16.--20. "CMD2,cmd_buff2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "CMD1_INT_EN,cmd1 complete int enable" "0,1"
bitfld.long 0x00 8.--12. "CMD1,cmd_buff1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "CMD0_INT_EN,cmd0 complete int enable" "0,1"
bitfld.long 0x00 0.--4. "CMD0,cmd_buff0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x34++0x03
line.long 0x00 "ADC1_ADC_CMD_BUFF1,ADC Command Buff Register1(ADC_CMD_BUFF1)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
bitfld.long 0x00 13. "CMD5_INT_EN,cmd5 complete int enable" "0,1"
bitfld.long 0x00 8.--12. "CMD5,cmd_buff5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "CMD4_INT_EN,cmd4 complete int enable" "0,1"
bitfld.long 0x00 0.--4. "CMD4,cmd_buff4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x38++0x03
line.long 0x00 "ADC1_ADC_GAIN,ADC gain trim register"
bitfld.long 0x00 28.--31. "RSVD_31_28,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 16.--27. 1. "GAIN1,gain trim1"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "GAIN0,gain trim0"
tree.end
tree.end
tree "AES"
base ad:0x400332000
group.long 0x00++0x03
line.long 0x00 "AES_VERSION,Version register"
hexmask.long 0x00 0.--31. 1. "VERSION,Version number of the IP"
group.long 0x04++0x03
line.long 0x00 "AES_STATUS,Status register"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
hexmask.long.byte 0x00 1.--8. 1. "ERR,error code"
bitfld.long 0x00 0. "R,R ready bit" "0,1"
group.long 0x08++0x03
line.long 0x00 "AES_CONTROL,Control register"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 1.--4. "RND,4-bit random data" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "S,operation start bit" "0,1"
group.long 0x0C++0x03
line.long 0x00 "AES_CONFIG,Config register"
hexmask.long.byte 0x00 24.--31. 1. "ALGO,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "BS,Block Size"
hexmask.long.byte 0x00 8.--15. 1. "MODE,operation mode"
bitfld.long 0x00 4.--7. "RSVD_7_4,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
bitfld.long 0x00 1.--2. "KSS,Reserved" "0,1,2,3"
bitfld.long 0x00 0. "CD,operation command" "0,1"
group.long 0x1C++0x03
line.long 0x00 "AES_DATA_I0,Data input 0 registers"
hexmask.long 0x00 0.--31. 1. "DATA_I,data input"
group.long 0x20++0x03
line.long 0x00 "AES_DATA_I1,Data input 1 registers"
hexmask.long 0x00 0.--31. 1. "DATA_I,data input"
group.long 0x24++0x03
line.long 0x00 "AES_DATA_I2,Data input 2 registers"
hexmask.long 0x00 0.--31. 1. "DATA_I,data input"
group.long 0x28++0x03
line.long 0x00 "AES_DATA_I3,Data input 3 registers"
hexmask.long 0x00 0.--31. 1. "DATA_I,data input"
group.long 0x2C++0x03
line.long 0x00 "AES_DATA_O0,Data output 0 registers"
hexmask.long 0x00 0.--31. 1. "DATA_O,data output"
group.long 0x30++0x03
line.long 0x00 "AES_DATA_O1,Data output 1 registers"
hexmask.long 0x00 0.--31. 1. "DATA_O,data output"
group.long 0x34++0x03
line.long 0x00 "AES_DATA_O2,Data output 2 registers"
hexmask.long 0x00 0.--31. 1. "DATA_O,data output"
group.long 0x38++0x03
line.long 0x00 "AES_DATA_O3,Data output 3 registers"
hexmask.long 0x00 0.--31. 1. "DATA_O,data output"
group.long 0x3C++0x03
line.long 0x00 "AES_KEY0,Key 0 registers"
hexmask.long 0x00 0.--31. 1. "KEY0,input KEY 0"
group.long 0x40++0x03
line.long 0x00 "AES_KEY1,Key 1 registers"
hexmask.long 0x00 0.--31. 1. "KEY1,input KEY 1"
group.long 0x44++0x03
line.long 0x00 "AES_KEY2,Key 2 registers"
hexmask.long 0x00 0.--31. 1. "KEY2,input KEY 2"
group.long 0x48++0x03
line.long 0x00 "AES_KEY3,Key 3 registers"
hexmask.long 0x00 0.--31. 1. "KEY3,input KEY 3"
group.long 0x5C++0x03
line.long 0x00 "AES_IV0,Initialization Vector (IV) input 0 registers"
hexmask.long 0x00 0.--31. 1. "IV0,Initialization Vector 0"
group.long 0x60++0x03
line.long 0x00 "AES_IV1,Initialization Vector (IV) input 1 registers"
hexmask.long 0x00 0.--31. 1. "IV1,Initialization Vector 1"
group.long 0x64++0x03
line.long 0x00 "AES_IV2,Initialization Vector (IV) input 2 registers"
hexmask.long 0x00 0.--31. 1. "IV2,Initialization Vector 2"
group.long 0x68++0x03
line.long 0x00 "AES_IV3,Initialization Vector (IV) input 3 registers"
hexmask.long 0x00 0.--31. 1. "IV3,Initialization Vector 3"
tree.end
tree "CAN"
tree "CAN0"
base ad:0x40024000
group.long 0x00++0x03
line.long 0x00 "CAN0_CAN_MCR,CAN module configure register(CAN_MCR)"
bitfld.long 0x00 31. "MDIS,Module Disable" "0,1"
bitfld.long 0x00 30. "FRZ,Freeze Enable" "0,1"
bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0,1"
bitfld.long 0x00 28. "HALT,Halt CAN" "0,1"
bitfld.long 0x00 27. "NOTRDY,CAN Not Ready" "0,1"
newline
bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0,1"
bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0,1"
bitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0,1"
bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0,1"
bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0,1"
newline
bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0,1"
bitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0,1"
bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0,1"
bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0,1"
bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0,1"
newline
bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0,1"
bitfld.long 0x00 15. "DMAE,DMA Enable" "0,1"
bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0,1"
bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0,1"
bitfld.long 0x00 12. "AEN,Abort Enable" "0,1"
newline
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0,1"
bitfld.long 0x00 10. "RSVD_10,reserve" "0,1"
bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0,1,2,3"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Reserved"
group.long 0x04++0x03
line.long 0x00 "CAN0_CAN_CTRL1,CONTROL 1 register(CAN_CTRL1)"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor"
bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "0,1"
newline
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "LPB,Loop Back Mode" "0,1"
bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0,1"
bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0,1"
bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0,1"
bitfld.long 0x00 5. "TSYC,Timer Sync" "0,1"
bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0,1"
newline
bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0,1"
bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "CAN0_CAN_TIMER,Free Running Timer register(CAN_TIMER)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "TIMER,free running counter value"
group.long 0x10++0x03
line.long 0x00 "CAN0_CAN_RXMGMSK,Rx mailbox global mask register(CAN_RXMGMSK)"
hexmask.long 0x00 0.--31. 1. "MG,Rx mailbox global mask"
group.long 0x14++0x03
line.long 0x00 "CAN0_CAN_RX14MASK,Rx 14 mask register(CAN_RX14MASK)"
hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits"
group.long 0x18++0x03
line.long 0x00 "CAN0_CAN_RX15MASK,Rx 15 mask register(CAN_RX15MASK)"
hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits"
group.long 0x1C++0x03
line.long 0x00 "CAN0_CAN_ECR,Error counter register(CAN_ECR)"
hexmask.long.byte 0x00 24.--31. 1. "RX_ERRCNT_FAST,Receive Error Counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TX_ERRCNT_FAST,Transmit Error Counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter"
hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter"
group.long 0x20++0x03
line.long 0x00 "CAN0_CAN_ESR1,CAN error status register(CAN_ESR1)"
bitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 29. "RSVD_29,reserve" "0,1"
bitfld.long 0x00 28. "CRCERR_FAST,CRC error in CAN_FD CRC phase" "0,1"
bitfld.long 0x00 27. "FRAMERR_FAST,Frame error of CAN_FD data phase" "0,1"
newline
bitfld.long 0x00 26. "STFERR_FAST,Stuff erro of CAN_FD data phase" "0,1"
bitfld.long 0x00 22.--25. "RSVD_25_22,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "ERROVR,error of overrun" "0,1"
bitfld.long 0x00 20. "ERRINT_FAST,error interrupt of errors detect in CAN_FD data phase" "0,1"
bitfld.long 0x00 19. "BUSOFFDONEINT,Bus off done interrupt" "0,1"
newline
bitfld.long 0x00 18. "SYNCH,Synchronous" "0,1"
bitfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt" "0,1"
bitfld.long 0x00 16. "RWRNINT,Rx warning Interrupt" "0,1"
bitfld.long 0x00 15. "BIT1ERR,Bit error of CAN non-fd" "0,1"
bitfld.long 0x00 14. "BIT0ERR,Bit0 error of CAN non-fd" "0,1"
newline
bitfld.long 0x00 13. "ACKERR,Acknowledge error of non-fd" "0,1"
bitfld.long 0x00 12. "CRCERR,CRC error of non-fd" "0,1"
bitfld.long 0x00 11. "FRAMERR,frame error of non-fd" "0,1"
bitfld.long 0x00 10. "STFERR,stuff erro of non-fd" "0,1"
bitfld.long 0x00 9. "TXWRN,tx warning" "0,1"
newline
bitfld.long 0x00 8. "RXWRN,Rx warning" "0,1"
bitfld.long 0x00 7. "IDLE,IDLE" "0,1"
bitfld.long 0x00 6. "TX,Flexcan in transmission" "0,1"
bitfld.long 0x00 4.--5. "FLTCONF,Fault confinement state" "0,1,2,3"
bitfld.long 0x00 3. "RX,Flexcan in Reception" "0,1"
newline
bitfld.long 0x00 2. "BOFFINT,bus off interrupt" "0,1"
bitfld.long 0x00 1. "ERRINT,error interrupt" "0,1"
bitfld.long 0x00 0. "WAKINT,wakeup interrupt" "0,1"
group.long 0x24++0x03
line.long 0x00 "CAN0_CAN_IMASK2,Interrupt mask 2 register(CAN_IMASK2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MB i Mask"
group.long 0x28++0x03
line.long 0x00 "CAN0_CAN_IMASK1,Interrupt mask 1 register(CAN_IMASK1)"
hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MB31 -0 Mask"
group.long 0x2C++0x03
line.long 0x00 "CAN0_CAN_IFLAG2,Interrupt flag 2 register(CAN_IFLAG2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MB63-32 Mask"
group.long 0x30++0x03
line.long 0x00 "CAN0_CAN_IFLAG1,Interrupt flag 1 register(CAN_IFLAG1)"
hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer8-31 interrupt"
bitfld.long 0x00 7. "BUF7I,Buffer7 interrupt" "0,1"
bitfld.long 0x00 6. "BUF6I,Buffer6 interrupt" "0,1"
bitfld.long 0x00 5. "BUF5I,Buffer5 interrupt" "0,1"
bitfld.long 0x00 1.--4. "BUF4TO1I,Buffer 1-4 interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "BUF0I,Buffer0 interrupt" "0,1"
group.long 0x34++0x03
line.long 0x00 "CAN0_CAN_CTRL2,Control 2 register(CAN_CTRL2)"
bitfld.long 0x00 31. "ERRMASK_FAST,error mask of can-fd" "0,1"
bitfld.long 0x00 30. "BOFFDONEMSK,bus off done mask" "0,1"
bitfld.long 0x00 29. "ECRWRE,error correction register write enable" "0,1"
bitfld.long 0x00 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0,1"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0,1"
bitfld.long 0x00 17. "RRS,Remote Request Storing" "0,1"
bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0,1"
bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0,1"
newline
bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0,1"
bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0,1"
hexmask.long.word 0x00 0.--10. 1. "RSVD_10_0,reserve"
group.long 0x38++0x03
line.long 0x00 "CAN0_CAN_ESR2,Error and Status 2 register(CAN_ESR2)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
bitfld.long 0x00 14. "VPS,Valid Priority Status" "0,1"
bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0,1"
newline
hexmask.long.word 0x00 0.--12. 1. "RSVD_12_0,reserve"
group.long 0x44++0x03
line.long 0x00 "CAN0_CAN_CRCR,CRC register(CAN_CRCR)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC Value"
group.long 0x48++0x03
line.long 0x00 "CAN0_CAN_RXFGMASK,Leagacy FIFO global mask register(CAN_RXFGMASK)"
hexmask.long 0x00 0.--31. 1. "FGM,Rx FIFO Global Mask Bits"
group.long 0x4C++0x03
line.long 0x00 "CAN0_CAN_RXFIR,RX FIFO ID indicator(CAN_RXFIR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,reserve"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,ID Hit incicator"
group.long 0x50++0x03
line.long 0x00 "CAN0_CAN_CBT,CAN bit timing register(CAN_CBT)"
bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0,1"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor"
bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x68++0x03
line.long 0x00 "CAN0_CAN_IMASK4,Interrupt mask 4 register(CAN_IMASK4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96M,Buffer MB 127-96 Mask"
group.long 0x6C++0x03
line.long 0x00 "CAN0_CAN_IMASK3,Interrupt mask 3 register(CAN_IMASK3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64M,Buffer MB 95-64 Mask"
group.long 0x70++0x03
line.long 0x00 "CAN0_CAN_IFLAG4,Interrupt flag 4 register(CAN_IFLAG4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96I,Buffer MB 127-96 Interrupt"
group.long 0x74++0x03
line.long 0x00 "CAN0_CAN_IFLAG3,Interrupt flag 3 register(CAN_IFLAG3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64I,Buffer MB 95-64 Interrupt"
group.long 0x80++0x03
line.long 0x00 "CAN0_CAN_MB0_CS,reserve"
bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1"
bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1"
bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1"
bitfld.long 0x00 28. "RSVD_28,reserve" "0,1"
bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RSVD_23,reserve" "0,1"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time Stamp"
group.long 0x84++0x03
line.long 0x00 "CAN0_CAN_MB0_ID,Message buffer ID register(CAN_MB0_ID)"
bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 18.--28. 1. "ID_STD_EXD,Frame Identifier"
hexmask.long.tbyte 0x00 0.--17. 1. "ID_EXTEND,Frame Identifier"
group.long 0x88++0x03
line.long 0x00 "CAN0_CAN_MB0_DATA03,Message buffer date03 register(CAN_MB0_DATA03)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE03,data byte0-3"
group.long 0x8C++0x03
line.long 0x00 "CAN0_CAN_MB0_DATA47,Message buffer date47 register(CAN_MB0_DAT47)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE47,data byte0-3"
group.long 0x880++0x03
line.long 0x00 "CAN0_CAN_RXIMRn,RX individual mask register(CAN_RXIMRn)"
hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits"
group.long 0xAE0++0x03
line.long 0x00 "CAN0_CAN_MECR,Memory error control register(CAN_MECR)"
bitfld.long 0x00 31. "ECRWRDIS,Error Configuration Register Write Disable" "0,1"
hexmask.long.word 0x00 20.--30. 1. "RSVD_30_20,reserve"
bitfld.long 0x00 19. "HANCEI_MSK,Host Access with Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 18. "FANCEI_MSK,CAN Access With Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 15. "HAERRI,Host Access Error Injection Enable" "0,1"
bitfld.long 0x00 14. "FAERRIE,CAN Access Error Injection Enable" "0,1"
bitfld.long 0x00 13. "EXTERRIE,Extended Error Injection" "0,1"
bitfld.long 0x00 10.--12. "RSVD_12_10,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "RERRDIS,Error Report Disable" "0,1"
bitfld.long 0x00 8. "ECCDIS,Error Correction Disable" "0,1"
bitfld.long 0x00 7. "NCEFAFRZ,Non-Correctable Errors In CAN Access Put Device In Freeze Mode" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "RSVD_6_0,reserve"
group.long 0xAE4++0x03
line.long 0x00 "CAN0_CAN_ERRIAR,Error injection address regsiter(CAN_ERRIAR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
hexmask.long.word 0x00 2.--13. 1. "INJADDR_H,Error Injection Address High"
bitfld.long 0x00 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3"
group.long 0xAE8++0x03
line.long 0x00 "CAN0_CAN_ERRIDPR,Error injection data pattern register(CAN_ERRIDPR)"
hexmask.long 0x00 0.--31. 1. "DFLIP,Data Flip Pattern"
group.long 0xAEC++0x03
line.long 0x00 "CAN0_CAN_ERRIPPR,Error injection parity pattern register(CAN_ERRIPPR)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "PFLIP2,Parity Flip Pattern For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "PFLIP1,Parity Flip Pattern For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "PFLIP0,Parity Flip Pattern For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAF0++0x03
line.long 0x00 "CAN0_CAN_RERRAR,Error report address register(CAN_RERRAR)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,reserve"
bitfld.long 0x00 24. "NCE,Non-Correctable Error: Indicates that the report is due to a non-correctable error" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "SAID,SAID[2]: Identification of the requestor of the memory read request SAID[1]: Details of FlexCAN operation SAID[0]: Operation that requested the memory" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--15. "RSVD_15_14,reserve" "0,1,2,3"
newline
hexmask.long.word 0x00 0.--13. 1. "ERRADDR,Address Where the Error was Detected"
group.long 0xAF4++0x03
line.long 0x00 "CAN0_CAN_RERRDR,Error report data register(CAN_RERRDR)"
hexmask.long 0x00 0.--31. 1. "RDATA,Raw data word read from memory with error"
group.long 0xAF8++0x03
line.long 0x00 "CAN0_CAN_RERRSYNR,Error report Syndrome reigster(CAN_RERRSYNR)"
bitfld.long 0x00 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,reserve" "0,1,2,3"
bitfld.long 0x00 24.--28. "SYND3,Error Syndrome For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "BE2,Error Syndrome For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 21.--22. "RSVD_22_21,reserve" "0,1,2,3"
newline
bitfld.long 0x00 16.--20. "SYND2,Error Syndrome For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "BE1,Byte Enabled For Byte 1" "0,1"
bitfld.long 0x00 13.--14. "RSVD_14_13,reserve" "0,1,2,3"
bitfld.long 0x00 8.--12. "SYND1,Error Syndrome For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0,1"
newline
bitfld.long 0x00 5.--6. "RSVD_6_5,reserve" "0,1,2,3"
bitfld.long 0x00 0.--4. "SYND0,Error Syndrome For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAFC++0x03
line.long 0x00 "CAN0_CAN_ERRSR,Error status register(CAN_ERRSR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 19. "HANCEIF,Host Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 18. "FANCEIF,CAN Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
bitfld.long 0x00 16. "CEIF,Correctable Error Interrupt Flag" "0,1"
newline
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 3. "HANCEIOF,Host Access with Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 2. "FANCEIOF,CAN Access With Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,reserve" "0,1"
bitfld.long 0x00 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0,1"
group.long 0xB00++0x03
line.long 0x00 "CAN0_CAN_CTRL1_PN,Pretend network control 1 register(CAN_CTRL1_PN)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0,1"
bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0,1,2,3"
bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0,1,2,3"
group.long 0xB04++0x03
line.long 0x00 "CAN0_CAN_CTRL2_PN,Pretend network control 2 register(CAN_CTRL2_PN)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria"
group.long 0xB08++0x03
line.long 0x00 "CAN0_CAN_WU_MTC,Pretend network wakeup match register(CAN_WU_MTC)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0,1"
bitfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xB0C++0x03
line.long 0x00 "CAN0_CAN_FLT_ID1,Pretend network ID filter 1 register(CAN_FLT_ID1)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "FLT_IDE,Number of Matches when in Pretended Networking" "0,1"
bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking Filtering"
group.long 0xB10++0x03
line.long 0x00 "CAN0_CAN_FLT_DLC,Pretend network DLC filter register(CAN_FLT_DLC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB14++0x03
line.long 0x00 "CAN0_CAN_PL1_LO,Pretend network payload low filter 1 register(CAN_PL1_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB18++0x03
line.long 0x00 "CAN0_CAN_PL1_HI,Pretend network payload high filter 1 register(CAN_PL1_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB1C++0x03
line.long 0x00 "CAN0_CAN_FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register(CAN_FLT_ID2_IDMASK)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0,1"
bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering/ ID Mask Bits for Pretended Networking ID Filtering"
group.long 0xB20++0x03
line.long 0x00 "CAN0_CAN_PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register(CAN_PL2_PLMASK_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB24++0x03
line.long 0x00 "CAN0_CAN_PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask Register (PL2_PLMASK_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB40++0x03
line.long 0x00 "CAN0_CAN_WMBn_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB44++0x03
line.long 0x00 "CAN0_CAN_WMBn_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB48++0x03
line.long 0x00 "CAN0_CAN_WMBn_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB4C++0x03
line.long 0x00 "CAN0_CAN_WMBn_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB50++0x03
line.long 0x00 "CAN0_CAN_WMB1_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB54++0x03
line.long 0x00 "CAN0_CAN_WMB1_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB58++0x03
line.long 0x00 "CAN0_CAN_WMB1_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB5C++0x03
line.long 0x00 "CAN0_CAN_WMB1_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB60++0x03
line.long 0x00 "CAN0_CAN_WMB2_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB64++0x03
line.long 0x00 "CAN0_CAN_WMB2_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB68++0x03
line.long 0x00 "CAN0_CAN_WMB2_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB6C++0x03
line.long 0x00 "CAN0_CAN_WMB2_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB70++0x03
line.long 0x00 "CAN0_CAN_WMB3_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB74++0x03
line.long 0x00 "CAN0_CAN_WMB3_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB78++0x03
line.long 0x00 "CAN0_CAN_WMB3_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB7C++0x03
line.long 0x00 "CAN0_CAN_WMB3_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xC00++0x03
line.long 0x00 "CAN0_CAN_FDCTRL,CAN FD control register(CAN_FDCTRL)"
bitfld.long 0x00 31. "FD_RATE,Bit Rate Switch Enable" "0,1"
bitfld.long 0x00 27.--30. "RSVD_30_27,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "MBDSR3,Message Buffer Data Size for Region 3" "0,1,2,3"
bitfld.long 0x00 24. "RSVD_24,reserve" "0,1"
bitfld.long 0x00 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0,1,2,3"
newline
bitfld.long 0x00 21. "RSVD_21,reserve" "0,1"
bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0,1,2,3"
bitfld.long 0x00 18. "RSVD_18,reserve" "0,1"
bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0,1,2,3"
bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0,1"
newline
bitfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xC04++0x03
line.long 0x00 "CAN0_CAN_FDCBT,CAN FD bit timing control register(CAN_FDCBT)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor"
bitfld.long 0x00 19. "RSVD_19,reserve" "0,1"
bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
newline
bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7"
group.long 0xC08++0x03
line.long 0x00 "CAN0_CAN_FDCRC,CAN FD CRC register(CAN_FDCRC)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value"
tree.end
tree "CAN1"
base ad:0x40025000
group.long 0x00++0x03
line.long 0x00 "CAN1_CAN_MCR,CAN module configure register(CAN_MCR)"
bitfld.long 0x00 31. "MDIS,Module Disable" "0,1"
bitfld.long 0x00 30. "FRZ,Freeze Enable" "0,1"
bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0,1"
bitfld.long 0x00 28. "HALT,Halt CAN" "0,1"
bitfld.long 0x00 27. "NOTRDY,CAN Not Ready" "0,1"
newline
bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0,1"
bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0,1"
bitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0,1"
bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0,1"
bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0,1"
newline
bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0,1"
bitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0,1"
bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0,1"
bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0,1"
bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0,1"
newline
bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0,1"
bitfld.long 0x00 15. "DMAE,DMA Enable" "0,1"
bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0,1"
bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0,1"
bitfld.long 0x00 12. "AEN,Abort Enable" "0,1"
newline
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0,1"
bitfld.long 0x00 10. "RSVD_10,reserve" "0,1"
bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0,1,2,3"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Reserved"
group.long 0x04++0x03
line.long 0x00 "CAN1_CAN_CTRL1,CONTROL 1 register(CAN_CTRL1)"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor"
bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "0,1"
newline
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "LPB,Loop Back Mode" "0,1"
bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0,1"
bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0,1"
bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0,1"
bitfld.long 0x00 5. "TSYC,Timer Sync" "0,1"
bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0,1"
newline
bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0,1"
bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "CAN1_CAN_TIMER,Free Running Timer register(CAN_TIMER)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "TIMER,free running counter value"
group.long 0x10++0x03
line.long 0x00 "CAN1_CAN_RXMGMSK,Rx mailbox global mask register(CAN_RXMGMSK)"
hexmask.long 0x00 0.--31. 1. "MG,Rx mailbox global mask"
group.long 0x14++0x03
line.long 0x00 "CAN1_CAN_RX14MASK,Rx 14 mask register(CAN_RX14MASK)"
hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits"
group.long 0x18++0x03
line.long 0x00 "CAN1_CAN_RX15MASK,Rx 15 mask register(CAN_RX15MASK)"
hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits"
group.long 0x1C++0x03
line.long 0x00 "CAN1_CAN_ECR,Error counter register(CAN_ECR)"
hexmask.long.byte 0x00 24.--31. 1. "RX_ERRCNT_FAST,Receive Error Counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TX_ERRCNT_FAST,Transmit Error Counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter"
hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter"
group.long 0x20++0x03
line.long 0x00 "CAN1_CAN_ESR1,CAN error status register(CAN_ESR1)"
bitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 29. "RSVD_29,reserve" "0,1"
bitfld.long 0x00 28. "CRCERR_FAST,CRC error in CAN_FD CRC phase" "0,1"
bitfld.long 0x00 27. "FRAMERR_FAST,Frame error of CAN_FD data phase" "0,1"
newline
bitfld.long 0x00 26. "STFERR_FAST,Stuff erro of CAN_FD data phase" "0,1"
bitfld.long 0x00 22.--25. "RSVD_25_22,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "ERROVR,error of overrun" "0,1"
bitfld.long 0x00 20. "ERRINT_FAST,error interrupt of errors detect in CAN_FD data phase" "0,1"
bitfld.long 0x00 19. "BUSOFFDONEINT,Bus off done interrupt" "0,1"
newline
bitfld.long 0x00 18. "SYNCH,Synchronous" "0,1"
bitfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt" "0,1"
bitfld.long 0x00 16. "RWRNINT,Rx warning Interrupt" "0,1"
bitfld.long 0x00 15. "BIT1ERR,Bit error of CAN non-fd" "0,1"
bitfld.long 0x00 14. "BIT0ERR,Bit0 error of CAN non-fd" "0,1"
newline
bitfld.long 0x00 13. "ACKERR,Acknowledge error of non-fd" "0,1"
bitfld.long 0x00 12. "CRCERR,CRC error of non-fd" "0,1"
bitfld.long 0x00 11. "FRAMERR,frame error of non-fd" "0,1"
bitfld.long 0x00 10. "STFERR,stuff erro of non-fd" "0,1"
bitfld.long 0x00 9. "TXWRN,tx warning" "0,1"
newline
bitfld.long 0x00 8. "RXWRN,Rx warning" "0,1"
bitfld.long 0x00 7. "IDLE,IDLE" "0,1"
bitfld.long 0x00 6. "TX,Flexcan in transmission" "0,1"
bitfld.long 0x00 4.--5. "FLTCONF,Fault confinement state" "0,1,2,3"
bitfld.long 0x00 3. "RX,Flexcan in Reception" "0,1"
newline
bitfld.long 0x00 2. "BOFFINT,bus off interrupt" "0,1"
bitfld.long 0x00 1. "ERRINT,error interrupt" "0,1"
bitfld.long 0x00 0. "WAKINT,wakeup interrupt" "0,1"
group.long 0x24++0x03
line.long 0x00 "CAN1_CAN_IMASK2,Interrupt mask 2 register(CAN_IMASK2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MB i Mask"
group.long 0x28++0x03
line.long 0x00 "CAN1_CAN_IMASK1,Interrupt mask 1 register(CAN_IMASK1)"
hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MB31 -0 Mask"
group.long 0x2C++0x03
line.long 0x00 "CAN1_CAN_IFLAG2,Interrupt flag 2 register(CAN_IFLAG2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MB63-32 Mask"
group.long 0x30++0x03
line.long 0x00 "CAN1_CAN_IFLAG1,Interrupt flag 1 register(CAN_IFLAG1)"
hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer8-31 interrupt"
bitfld.long 0x00 7. "BUF7I,Buffer7 interrupt" "0,1"
bitfld.long 0x00 6. "BUF6I,Buffer6 interrupt" "0,1"
bitfld.long 0x00 5. "BUF5I,Buffer5 interrupt" "0,1"
bitfld.long 0x00 1.--4. "BUF4TO1I,Buffer 1-4 interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "BUF0I,Buffer0 interrupt" "0,1"
group.long 0x34++0x03
line.long 0x00 "CAN1_CAN_CTRL2,Control 2 register(CAN_CTRL2)"
bitfld.long 0x00 31. "ERRMASK_FAST,error mask of can-fd" "0,1"
bitfld.long 0x00 30. "BOFFDONEMSK,bus off done mask" "0,1"
bitfld.long 0x00 29. "ECRWRE,error correction register write enable" "0,1"
bitfld.long 0x00 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0,1"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0,1"
bitfld.long 0x00 17. "RRS,Remote Request Storing" "0,1"
bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0,1"
bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0,1"
newline
bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0,1"
bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0,1"
hexmask.long.word 0x00 0.--10. 1. "RSVD_10_0,reserve"
group.long 0x38++0x03
line.long 0x00 "CAN1_CAN_ESR2,Error and Status 2 register(CAN_ESR2)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
bitfld.long 0x00 14. "VPS,Valid Priority Status" "0,1"
bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0,1"
newline
hexmask.long.word 0x00 0.--12. 1. "RSVD_12_0,reserve"
group.long 0x44++0x03
line.long 0x00 "CAN1_CAN_CRCR,CRC register(CAN_CRCR)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC Value"
group.long 0x48++0x03
line.long 0x00 "CAN1_CAN_RXFGMASK,Leagacy FIFO global mask register(CAN_RXFGMASK)"
hexmask.long 0x00 0.--31. 1. "FGM,Rx FIFO Global Mask Bits"
group.long 0x4C++0x03
line.long 0x00 "CAN1_CAN_RXFIR,RX FIFO ID indicator(CAN_RXFIR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,reserve"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,ID Hit incicator"
group.long 0x50++0x03
line.long 0x00 "CAN1_CAN_CBT,CAN bit timing register(CAN_CBT)"
bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0,1"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor"
bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x68++0x03
line.long 0x00 "CAN1_CAN_IMASK4,Interrupt mask 4 register(CAN_IMASK4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96M,Buffer MB 127-96 Mask"
group.long 0x6C++0x03
line.long 0x00 "CAN1_CAN_IMASK3,Interrupt mask 3 register(CAN_IMASK3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64M,Buffer MB 95-64 Mask"
group.long 0x70++0x03
line.long 0x00 "CAN1_CAN_IFLAG4,Interrupt flag 4 register(CAN_IFLAG4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96I,Buffer MB 127-96 Interrupt"
group.long 0x74++0x03
line.long 0x00 "CAN1_CAN_IFLAG3,Interrupt flag 3 register(CAN_IFLAG3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64I,Buffer MB 95-64 Interrupt"
group.long 0x80++0x03
line.long 0x00 "CAN1_CAN_MB0_CS,reserve"
bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1"
bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1"
bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1"
bitfld.long 0x00 28. "RSVD_28,reserve" "0,1"
bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RSVD_23,reserve" "0,1"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time Stamp"
group.long 0x84++0x03
line.long 0x00 "CAN1_CAN_MB0_ID,Message buffer ID register(CAN_MB0_ID)"
bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 18.--28. 1. "ID_STD_EXD,Frame Identifier"
hexmask.long.tbyte 0x00 0.--17. 1. "ID_EXTEND,Frame Identifier"
group.long 0x88++0x03
line.long 0x00 "CAN1_CAN_MB0_DATA03,Message buffer date03 register(CAN_MB0_DATA03)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE03,data byte0-3"
group.long 0x8C++0x03
line.long 0x00 "CAN1_CAN_MB0_DATA47,Message buffer date47 register(CAN_MB0_DAT47)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE47,data byte0-3"
group.long 0x880++0x03
line.long 0x00 "CAN1_CAN_RXIMRn,RX individual mask register(CAN_RXIMRn)"
hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits"
group.long 0xAE0++0x03
line.long 0x00 "CAN1_CAN_MECR,Memory error control register(CAN_MECR)"
bitfld.long 0x00 31. "ECRWRDIS,Error Configuration Register Write Disable" "0,1"
hexmask.long.word 0x00 20.--30. 1. "RSVD_30_20,reserve"
bitfld.long 0x00 19. "HANCEI_MSK,Host Access with Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 18. "FANCEI_MSK,CAN Access With Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 15. "HAERRI,Host Access Error Injection Enable" "0,1"
bitfld.long 0x00 14. "FAERRIE,CAN Access Error Injection Enable" "0,1"
bitfld.long 0x00 13. "EXTERRIE,Extended Error Injection" "0,1"
bitfld.long 0x00 10.--12. "RSVD_12_10,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "RERRDIS,Error Report Disable" "0,1"
bitfld.long 0x00 8. "ECCDIS,Error Correction Disable" "0,1"
bitfld.long 0x00 7. "NCEFAFRZ,Non-Correctable Errors In CAN Access Put Device In Freeze Mode" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "RSVD_6_0,reserve"
group.long 0xAE4++0x03
line.long 0x00 "CAN1_CAN_ERRIAR,Error injection address regsiter(CAN_ERRIAR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
hexmask.long.word 0x00 2.--13. 1. "INJADDR_H,Error Injection Address High"
bitfld.long 0x00 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3"
group.long 0xAE8++0x03
line.long 0x00 "CAN1_CAN_ERRIDPR,Error injection data pattern register(CAN_ERRIDPR)"
hexmask.long 0x00 0.--31. 1. "DFLIP,Data Flip Pattern"
group.long 0xAEC++0x03
line.long 0x00 "CAN1_CAN_ERRIPPR,Error injection parity pattern register(CAN_ERRIPPR)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "PFLIP2,Parity Flip Pattern For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "PFLIP1,Parity Flip Pattern For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "PFLIP0,Parity Flip Pattern For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAF0++0x03
line.long 0x00 "CAN1_CAN_RERRAR,Error report address register(CAN_RERRAR)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,reserve"
bitfld.long 0x00 24. "NCE,Non-Correctable Error: Indicates that the report is due to a non-correctable error" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "SAID,SAID[2]: Identification of the requestor of the memory read request SAID[1]: Details of FlexCAN operation SAID[0]: Operation that requested the memory" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--15. "RSVD_15_14,reserve" "0,1,2,3"
newline
hexmask.long.word 0x00 0.--13. 1. "ERRADDR,Address Where the Error was Detected"
group.long 0xAF4++0x03
line.long 0x00 "CAN1_CAN_RERRDR,Error report data register(CAN_RERRDR)"
hexmask.long 0x00 0.--31. 1. "RDATA,Raw data word read from memory with error"
group.long 0xAF8++0x03
line.long 0x00 "CAN1_CAN_RERRSYNR,Error report Syndrome reigster(CAN_RERRSYNR)"
bitfld.long 0x00 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,reserve" "0,1,2,3"
bitfld.long 0x00 24.--28. "SYND3,Error Syndrome For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "BE2,Error Syndrome For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 21.--22. "RSVD_22_21,reserve" "0,1,2,3"
newline
bitfld.long 0x00 16.--20. "SYND2,Error Syndrome For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "BE1,Byte Enabled For Byte 1" "0,1"
bitfld.long 0x00 13.--14. "RSVD_14_13,reserve" "0,1,2,3"
bitfld.long 0x00 8.--12. "SYND1,Error Syndrome For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0,1"
newline
bitfld.long 0x00 5.--6. "RSVD_6_5,reserve" "0,1,2,3"
bitfld.long 0x00 0.--4. "SYND0,Error Syndrome For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAFC++0x03
line.long 0x00 "CAN1_CAN_ERRSR,Error status register(CAN_ERRSR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 19. "HANCEIF,Host Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 18. "FANCEIF,CAN Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
bitfld.long 0x00 16. "CEIF,Correctable Error Interrupt Flag" "0,1"
newline
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 3. "HANCEIOF,Host Access with Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 2. "FANCEIOF,CAN Access With Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,reserve" "0,1"
bitfld.long 0x00 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0,1"
group.long 0xB00++0x03
line.long 0x00 "CAN1_CAN_CTRL1_PN,Pretend network control 1 register(CAN_CTRL1_PN)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0,1"
bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0,1,2,3"
bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0,1,2,3"
group.long 0xB04++0x03
line.long 0x00 "CAN1_CAN_CTRL2_PN,Pretend network control 2 register(CAN_CTRL2_PN)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria"
group.long 0xB08++0x03
line.long 0x00 "CAN1_CAN_WU_MTC,Pretend network wakeup match register(CAN_WU_MTC)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0,1"
bitfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xB0C++0x03
line.long 0x00 "CAN1_CAN_FLT_ID1,Pretend network ID filter 1 register(CAN_FLT_ID1)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "FLT_IDE,Number of Matches when in Pretended Networking" "0,1"
bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking Filtering"
group.long 0xB10++0x03
line.long 0x00 "CAN1_CAN_FLT_DLC,Pretend network DLC filter register(CAN_FLT_DLC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB14++0x03
line.long 0x00 "CAN1_CAN_PL1_LO,Pretend network payload low filter 1 register(CAN_PL1_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB18++0x03
line.long 0x00 "CAN1_CAN_PL1_HI,Pretend network payload high filter 1 register(CAN_PL1_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB1C++0x03
line.long 0x00 "CAN1_CAN_FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register(CAN_FLT_ID2_IDMASK)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0,1"
bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering/ ID Mask Bits for Pretended Networking ID Filtering"
group.long 0xB20++0x03
line.long 0x00 "CAN1_CAN_PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register(CAN_PL2_PLMASK_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB24++0x03
line.long 0x00 "CAN1_CAN_PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask Register (PL2_PLMASK_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB40++0x03
line.long 0x00 "CAN1_CAN_WMBn_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB44++0x03
line.long 0x00 "CAN1_CAN_WMBn_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB48++0x03
line.long 0x00 "CAN1_CAN_WMBn_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB4C++0x03
line.long 0x00 "CAN1_CAN_WMBn_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB50++0x03
line.long 0x00 "CAN1_CAN_WMB1_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB54++0x03
line.long 0x00 "CAN1_CAN_WMB1_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB58++0x03
line.long 0x00 "CAN1_CAN_WMB1_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB5C++0x03
line.long 0x00 "CAN1_CAN_WMB1_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB60++0x03
line.long 0x00 "CAN1_CAN_WMB2_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB64++0x03
line.long 0x00 "CAN1_CAN_WMB2_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB68++0x03
line.long 0x00 "CAN1_CAN_WMB2_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB6C++0x03
line.long 0x00 "CAN1_CAN_WMB2_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB70++0x03
line.long 0x00 "CAN1_CAN_WMB3_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB74++0x03
line.long 0x00 "CAN1_CAN_WMB3_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB78++0x03
line.long 0x00 "CAN1_CAN_WMB3_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB7C++0x03
line.long 0x00 "CAN1_CAN_WMB3_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xC00++0x03
line.long 0x00 "CAN1_CAN_FDCTRL,CAN FD control register(CAN_FDCTRL)"
bitfld.long 0x00 31. "FD_RATE,Bit Rate Switch Enable" "0,1"
bitfld.long 0x00 27.--30. "RSVD_30_27,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "MBDSR3,Message Buffer Data Size for Region 3" "0,1,2,3"
bitfld.long 0x00 24. "RSVD_24,reserve" "0,1"
bitfld.long 0x00 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0,1,2,3"
newline
bitfld.long 0x00 21. "RSVD_21,reserve" "0,1"
bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0,1,2,3"
bitfld.long 0x00 18. "RSVD_18,reserve" "0,1"
bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0,1,2,3"
bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0,1"
newline
bitfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xC04++0x03
line.long 0x00 "CAN1_CAN_FDCBT,CAN FD bit timing control register(CAN_FDCBT)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor"
bitfld.long 0x00 19. "RSVD_19,reserve" "0,1"
bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
newline
bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7"
group.long 0xC08++0x03
line.long 0x00 "CAN1_CAN_FDCRC,CAN FD CRC register(CAN_FDCRC)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value"
tree.end
tree "CAN2"
base ad:0x40038000
group.long 0x00++0x03
line.long 0x00 "CAN2_CAN_MCR,CAN module configure register(CAN_MCR)"
bitfld.long 0x00 31. "MDIS,Module Disable" "0,1"
bitfld.long 0x00 30. "FRZ,Freeze Enable" "0,1"
bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0,1"
bitfld.long 0x00 28. "HALT,Halt CAN" "0,1"
bitfld.long 0x00 27. "NOTRDY,CAN Not Ready" "0,1"
newline
bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0,1"
bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0,1"
bitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0,1"
bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0,1"
bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0,1"
newline
bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0,1"
bitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0,1"
bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0,1"
bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0,1"
bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0,1"
newline
bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0,1"
bitfld.long 0x00 15. "DMAE,DMA Enable" "0,1"
bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0,1"
bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0,1"
bitfld.long 0x00 12. "AEN,Abort Enable" "0,1"
newline
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0,1"
bitfld.long 0x00 10. "RSVD_10,reserve" "0,1"
bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0,1,2,3"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Reserved"
group.long 0x04++0x03
line.long 0x00 "CAN2_CAN_CTRL1,CONTROL 1 register(CAN_CTRL1)"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor"
bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "0,1"
newline
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "LPB,Loop Back Mode" "0,1"
bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0,1"
bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0,1"
bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0,1"
bitfld.long 0x00 5. "TSYC,Timer Sync" "0,1"
bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0,1"
newline
bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0,1"
bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "CAN2_CAN_TIMER,Free Running Timer register(CAN_TIMER)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "TIMER,free running counter value"
group.long 0x10++0x03
line.long 0x00 "CAN2_CAN_RXMGMSK,Rx mailbox global mask register(CAN_RXMGMSK)"
hexmask.long 0x00 0.--31. 1. "MG,Rx mailbox global mask"
group.long 0x14++0x03
line.long 0x00 "CAN2_CAN_RX14MASK,Rx 14 mask register(CAN_RX14MASK)"
hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits"
group.long 0x18++0x03
line.long 0x00 "CAN2_CAN_RX15MASK,Rx 15 mask register(CAN_RX15MASK)"
hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits"
group.long 0x1C++0x03
line.long 0x00 "CAN2_CAN_ECR,Error counter register(CAN_ECR)"
hexmask.long.byte 0x00 24.--31. 1. "RX_ERRCNT_FAST,Receive Error Counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TX_ERRCNT_FAST,Transmit Error Counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter"
hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter"
group.long 0x20++0x03
line.long 0x00 "CAN2_CAN_ESR1,CAN error status register(CAN_ESR1)"
bitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 29. "RSVD_29,reserve" "0,1"
bitfld.long 0x00 28. "CRCERR_FAST,CRC error in CAN_FD CRC phase" "0,1"
bitfld.long 0x00 27. "FRAMERR_FAST,Frame error of CAN_FD data phase" "0,1"
newline
bitfld.long 0x00 26. "STFERR_FAST,Stuff erro of CAN_FD data phase" "0,1"
bitfld.long 0x00 22.--25. "RSVD_25_22,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "ERROVR,error of overrun" "0,1"
bitfld.long 0x00 20. "ERRINT_FAST,error interrupt of errors detect in CAN_FD data phase" "0,1"
bitfld.long 0x00 19. "BUSOFFDONEINT,Bus off done interrupt" "0,1"
newline
bitfld.long 0x00 18. "SYNCH,Synchronous" "0,1"
bitfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt" "0,1"
bitfld.long 0x00 16. "RWRNINT,Rx warning Interrupt" "0,1"
bitfld.long 0x00 15. "BIT1ERR,Bit error of CAN non-fd" "0,1"
bitfld.long 0x00 14. "BIT0ERR,Bit0 error of CAN non-fd" "0,1"
newline
bitfld.long 0x00 13. "ACKERR,Acknowledge error of non-fd" "0,1"
bitfld.long 0x00 12. "CRCERR,CRC error of non-fd" "0,1"
bitfld.long 0x00 11. "FRAMERR,frame error of non-fd" "0,1"
bitfld.long 0x00 10. "STFERR,stuff erro of non-fd" "0,1"
bitfld.long 0x00 9. "TXWRN,tx warning" "0,1"
newline
bitfld.long 0x00 8. "RXWRN,Rx warning" "0,1"
bitfld.long 0x00 7. "IDLE,IDLE" "0,1"
bitfld.long 0x00 6. "TX,Flexcan in transmission" "0,1"
bitfld.long 0x00 4.--5. "FLTCONF,Fault confinement state" "0,1,2,3"
bitfld.long 0x00 3. "RX,Flexcan in Reception" "0,1"
newline
bitfld.long 0x00 2. "BOFFINT,bus off interrupt" "0,1"
bitfld.long 0x00 1. "ERRINT,error interrupt" "0,1"
bitfld.long 0x00 0. "WAKINT,wakeup interrupt" "0,1"
group.long 0x24++0x03
line.long 0x00 "CAN2_CAN_IMASK2,Interrupt mask 2 register(CAN_IMASK2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MB i Mask"
group.long 0x28++0x03
line.long 0x00 "CAN2_CAN_IMASK1,Interrupt mask 1 register(CAN_IMASK1)"
hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MB31 -0 Mask"
group.long 0x2C++0x03
line.long 0x00 "CAN2_CAN_IFLAG2,Interrupt flag 2 register(CAN_IFLAG2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MB63-32 Mask"
group.long 0x30++0x03
line.long 0x00 "CAN2_CAN_IFLAG1,Interrupt flag 1 register(CAN_IFLAG1)"
hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer8-31 interrupt"
bitfld.long 0x00 7. "BUF7I,Buffer7 interrupt" "0,1"
bitfld.long 0x00 6. "BUF6I,Buffer6 interrupt" "0,1"
bitfld.long 0x00 5. "BUF5I,Buffer5 interrupt" "0,1"
bitfld.long 0x00 1.--4. "BUF4TO1I,Buffer 1-4 interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "BUF0I,Buffer0 interrupt" "0,1"
group.long 0x34++0x03
line.long 0x00 "CAN2_CAN_CTRL2,Control 2 register(CAN_CTRL2)"
bitfld.long 0x00 31. "ERRMASK_FAST,error mask of can-fd" "0,1"
bitfld.long 0x00 30. "BOFFDONEMSK,bus off done mask" "0,1"
bitfld.long 0x00 29. "ECRWRE,error correction register write enable" "0,1"
bitfld.long 0x00 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0,1"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0,1"
bitfld.long 0x00 17. "RRS,Remote Request Storing" "0,1"
bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0,1"
bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0,1"
newline
bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0,1"
bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0,1"
hexmask.long.word 0x00 0.--10. 1. "RSVD_10_0,reserve"
group.long 0x38++0x03
line.long 0x00 "CAN2_CAN_ESR2,Error and Status 2 register(CAN_ESR2)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
bitfld.long 0x00 14. "VPS,Valid Priority Status" "0,1"
bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0,1"
newline
hexmask.long.word 0x00 0.--12. 1. "RSVD_12_0,reserve"
group.long 0x44++0x03
line.long 0x00 "CAN2_CAN_CRCR,CRC register(CAN_CRCR)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC Value"
group.long 0x48++0x03
line.long 0x00 "CAN2_CAN_RXFGMASK,Leagacy FIFO global mask register(CAN_RXFGMASK)"
hexmask.long 0x00 0.--31. 1. "FGM,Rx FIFO Global Mask Bits"
group.long 0x4C++0x03
line.long 0x00 "CAN2_CAN_RXFIR,RX FIFO ID indicator(CAN_RXFIR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,reserve"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,ID Hit incicator"
group.long 0x50++0x03
line.long 0x00 "CAN2_CAN_CBT,CAN bit timing register(CAN_CBT)"
bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0,1"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor"
bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x68++0x03
line.long 0x00 "CAN2_CAN_IMASK4,Interrupt mask 4 register(CAN_IMASK4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96M,Buffer MB 127-96 Mask"
group.long 0x6C++0x03
line.long 0x00 "CAN2_CAN_IMASK3,Interrupt mask 3 register(CAN_IMASK3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64M,Buffer MB 95-64 Mask"
group.long 0x70++0x03
line.long 0x00 "CAN2_CAN_IFLAG4,Interrupt flag 4 register(CAN_IFLAG4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96I,Buffer MB 127-96 Interrupt"
group.long 0x74++0x03
line.long 0x00 "CAN2_CAN_IFLAG3,Interrupt flag 3 register(CAN_IFLAG3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64I,Buffer MB 95-64 Interrupt"
group.long 0x80++0x03
line.long 0x00 "CAN2_CAN_MB0_CS,reserve"
bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1"
bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1"
bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1"
bitfld.long 0x00 28. "RSVD_28,reserve" "0,1"
bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RSVD_23,reserve" "0,1"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time Stamp"
group.long 0x84++0x03
line.long 0x00 "CAN2_CAN_MB0_ID,Message buffer ID register(CAN_MB0_ID)"
bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 18.--28. 1. "ID_STD_EXD,Frame Identifier"
hexmask.long.tbyte 0x00 0.--17. 1. "ID_EXTEND,Frame Identifier"
group.long 0x88++0x03
line.long 0x00 "CAN2_CAN_MB0_DATA03,Message buffer date03 register(CAN_MB0_DATA03)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE03,data byte0-3"
group.long 0x8C++0x03
line.long 0x00 "CAN2_CAN_MB0_DATA47,Message buffer date47 register(CAN_MB0_DAT47)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE47,data byte0-3"
group.long 0x880++0x03
line.long 0x00 "CAN2_CAN_RXIMRn,RX individual mask register(CAN_RXIMRn)"
hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits"
group.long 0xAE0++0x03
line.long 0x00 "CAN2_CAN_MECR,Memory error control register(CAN_MECR)"
bitfld.long 0x00 31. "ECRWRDIS,Error Configuration Register Write Disable" "0,1"
hexmask.long.word 0x00 20.--30. 1. "RSVD_30_20,reserve"
bitfld.long 0x00 19. "HANCEI_MSK,Host Access with Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 18. "FANCEI_MSK,CAN Access With Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 15. "HAERRI,Host Access Error Injection Enable" "0,1"
bitfld.long 0x00 14. "FAERRIE,CAN Access Error Injection Enable" "0,1"
bitfld.long 0x00 13. "EXTERRIE,Extended Error Injection" "0,1"
bitfld.long 0x00 10.--12. "RSVD_12_10,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "RERRDIS,Error Report Disable" "0,1"
bitfld.long 0x00 8. "ECCDIS,Error Correction Disable" "0,1"
bitfld.long 0x00 7. "NCEFAFRZ,Non-Correctable Errors In CAN Access Put Device In Freeze Mode" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "RSVD_6_0,reserve"
group.long 0xAE4++0x03
line.long 0x00 "CAN2_CAN_ERRIAR,Error injection address regsiter(CAN_ERRIAR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
hexmask.long.word 0x00 2.--13. 1. "INJADDR_H,Error Injection Address High"
bitfld.long 0x00 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3"
group.long 0xAE8++0x03
line.long 0x00 "CAN2_CAN_ERRIDPR,Error injection data pattern register(CAN_ERRIDPR)"
hexmask.long 0x00 0.--31. 1. "DFLIP,Data Flip Pattern"
group.long 0xAEC++0x03
line.long 0x00 "CAN2_CAN_ERRIPPR,Error injection parity pattern register(CAN_ERRIPPR)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "PFLIP2,Parity Flip Pattern For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "PFLIP1,Parity Flip Pattern For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "PFLIP0,Parity Flip Pattern For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAF0++0x03
line.long 0x00 "CAN2_CAN_RERRAR,Error report address register(CAN_RERRAR)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,reserve"
bitfld.long 0x00 24. "NCE,Non-Correctable Error: Indicates that the report is due to a non-correctable error" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "SAID,SAID[2]: Identification of the requestor of the memory read request SAID[1]: Details of FlexCAN operation SAID[0]: Operation that requested the memory" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--15. "RSVD_15_14,reserve" "0,1,2,3"
newline
hexmask.long.word 0x00 0.--13. 1. "ERRADDR,Address Where the Error was Detected"
group.long 0xAF4++0x03
line.long 0x00 "CAN2_CAN_RERRDR,Error report data register(CAN_RERRDR)"
hexmask.long 0x00 0.--31. 1. "RDATA,Raw data word read from memory with error"
group.long 0xAF8++0x03
line.long 0x00 "CAN2_CAN_RERRSYNR,Error report Syndrome reigster(CAN_RERRSYNR)"
bitfld.long 0x00 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,reserve" "0,1,2,3"
bitfld.long 0x00 24.--28. "SYND3,Error Syndrome For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "BE2,Error Syndrome For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 21.--22. "RSVD_22_21,reserve" "0,1,2,3"
newline
bitfld.long 0x00 16.--20. "SYND2,Error Syndrome For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "BE1,Byte Enabled For Byte 1" "0,1"
bitfld.long 0x00 13.--14. "RSVD_14_13,reserve" "0,1,2,3"
bitfld.long 0x00 8.--12. "SYND1,Error Syndrome For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0,1"
newline
bitfld.long 0x00 5.--6. "RSVD_6_5,reserve" "0,1,2,3"
bitfld.long 0x00 0.--4. "SYND0,Error Syndrome For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAFC++0x03
line.long 0x00 "CAN2_CAN_ERRSR,Error status register(CAN_ERRSR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 19. "HANCEIF,Host Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 18. "FANCEIF,CAN Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
bitfld.long 0x00 16. "CEIF,Correctable Error Interrupt Flag" "0,1"
newline
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 3. "HANCEIOF,Host Access with Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 2. "FANCEIOF,CAN Access With Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,reserve" "0,1"
bitfld.long 0x00 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0,1"
group.long 0xB00++0x03
line.long 0x00 "CAN2_CAN_CTRL1_PN,Pretend network control 1 register(CAN_CTRL1_PN)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0,1"
bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0,1,2,3"
bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0,1,2,3"
group.long 0xB04++0x03
line.long 0x00 "CAN2_CAN_CTRL2_PN,Pretend network control 2 register(CAN_CTRL2_PN)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria"
group.long 0xB08++0x03
line.long 0x00 "CAN2_CAN_WU_MTC,Pretend network wakeup match register(CAN_WU_MTC)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0,1"
bitfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xB0C++0x03
line.long 0x00 "CAN2_CAN_FLT_ID1,Pretend network ID filter 1 register(CAN_FLT_ID1)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "FLT_IDE,Number of Matches when in Pretended Networking" "0,1"
bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking Filtering"
group.long 0xB10++0x03
line.long 0x00 "CAN2_CAN_FLT_DLC,Pretend network DLC filter register(CAN_FLT_DLC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB14++0x03
line.long 0x00 "CAN2_CAN_PL1_LO,Pretend network payload low filter 1 register(CAN_PL1_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB18++0x03
line.long 0x00 "CAN2_CAN_PL1_HI,Pretend network payload high filter 1 register(CAN_PL1_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB1C++0x03
line.long 0x00 "CAN2_CAN_FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register(CAN_FLT_ID2_IDMASK)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0,1"
bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering/ ID Mask Bits for Pretended Networking ID Filtering"
group.long 0xB20++0x03
line.long 0x00 "CAN2_CAN_PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register(CAN_PL2_PLMASK_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB24++0x03
line.long 0x00 "CAN2_CAN_PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask Register (PL2_PLMASK_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB40++0x03
line.long 0x00 "CAN2_CAN_WMBn_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB44++0x03
line.long 0x00 "CAN2_CAN_WMBn_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB48++0x03
line.long 0x00 "CAN2_CAN_WMBn_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB4C++0x03
line.long 0x00 "CAN2_CAN_WMBn_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB50++0x03
line.long 0x00 "CAN2_CAN_WMB1_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB54++0x03
line.long 0x00 "CAN2_CAN_WMB1_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB58++0x03
line.long 0x00 "CAN2_CAN_WMB1_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB5C++0x03
line.long 0x00 "CAN2_CAN_WMB1_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB60++0x03
line.long 0x00 "CAN2_CAN_WMB2_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB64++0x03
line.long 0x00 "CAN2_CAN_WMB2_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB68++0x03
line.long 0x00 "CAN2_CAN_WMB2_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB6C++0x03
line.long 0x00 "CAN2_CAN_WMB2_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB70++0x03
line.long 0x00 "CAN2_CAN_WMB3_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB74++0x03
line.long 0x00 "CAN2_CAN_WMB3_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB78++0x03
line.long 0x00 "CAN2_CAN_WMB3_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB7C++0x03
line.long 0x00 "CAN2_CAN_WMB3_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xC00++0x03
line.long 0x00 "CAN2_CAN_FDCTRL,CAN FD control register(CAN_FDCTRL)"
bitfld.long 0x00 31. "FD_RATE,Bit Rate Switch Enable" "0,1"
bitfld.long 0x00 27.--30. "RSVD_30_27,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "MBDSR3,Message Buffer Data Size for Region 3" "0,1,2,3"
bitfld.long 0x00 24. "RSVD_24,reserve" "0,1"
bitfld.long 0x00 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0,1,2,3"
newline
bitfld.long 0x00 21. "RSVD_21,reserve" "0,1"
bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0,1,2,3"
bitfld.long 0x00 18. "RSVD_18,reserve" "0,1"
bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0,1,2,3"
bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0,1"
newline
bitfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xC04++0x03
line.long 0x00 "CAN2_CAN_FDCBT,CAN FD bit timing control register(CAN_FDCBT)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor"
bitfld.long 0x00 19. "RSVD_19,reserve" "0,1"
bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
newline
bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7"
group.long 0xC08++0x03
line.long 0x00 "CAN2_CAN_FDCRC,CAN FD CRC register(CAN_FDCRC)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value"
tree.end
tree "CAN3"
base ad:0x40039000
group.long 0x00++0x03
line.long 0x00 "CAN3_CAN_MCR,CAN module configure register(CAN_MCR)"
bitfld.long 0x00 31. "MDIS,Module Disable" "0,1"
bitfld.long 0x00 30. "FRZ,Freeze Enable" "0,1"
bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0,1"
bitfld.long 0x00 28. "HALT,Halt CAN" "0,1"
bitfld.long 0x00 27. "NOTRDY,CAN Not Ready" "0,1"
newline
bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0,1"
bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0,1"
bitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0,1"
bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0,1"
bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0,1"
newline
bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0,1"
bitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0,1"
bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0,1"
bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0,1"
bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0,1"
newline
bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0,1"
bitfld.long 0x00 15. "DMAE,DMA Enable" "0,1"
bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0,1"
bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0,1"
bitfld.long 0x00 12. "AEN,Abort Enable" "0,1"
newline
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0,1"
bitfld.long 0x00 10. "RSVD_10,reserve" "0,1"
bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0,1,2,3"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Reserved"
group.long 0x04++0x03
line.long 0x00 "CAN3_CAN_CTRL1,CONTROL 1 register(CAN_CTRL1)"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor"
bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "0,1"
newline
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "LPB,Loop Back Mode" "0,1"
bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0,1"
bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0,1"
bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0,1"
bitfld.long 0x00 5. "TSYC,Timer Sync" "0,1"
bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0,1"
newline
bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0,1"
bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "CAN3_CAN_TIMER,Free Running Timer register(CAN_TIMER)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "TIMER,free running counter value"
group.long 0x10++0x03
line.long 0x00 "CAN3_CAN_RXMGMSK,Rx mailbox global mask register(CAN_RXMGMSK)"
hexmask.long 0x00 0.--31. 1. "MG,Rx mailbox global mask"
group.long 0x14++0x03
line.long 0x00 "CAN3_CAN_RX14MASK,Rx 14 mask register(CAN_RX14MASK)"
hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits"
group.long 0x18++0x03
line.long 0x00 "CAN3_CAN_RX15MASK,Rx 15 mask register(CAN_RX15MASK)"
hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits"
group.long 0x1C++0x03
line.long 0x00 "CAN3_CAN_ECR,Error counter register(CAN_ECR)"
hexmask.long.byte 0x00 24.--31. 1. "RX_ERRCNT_FAST,Receive Error Counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TX_ERRCNT_FAST,Transmit Error Counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter"
hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter"
group.long 0x20++0x03
line.long 0x00 "CAN3_CAN_ESR1,CAN error status register(CAN_ESR1)"
bitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 29. "RSVD_29,reserve" "0,1"
bitfld.long 0x00 28. "CRCERR_FAST,CRC error in CAN_FD CRC phase" "0,1"
bitfld.long 0x00 27. "FRAMERR_FAST,Frame error of CAN_FD data phase" "0,1"
newline
bitfld.long 0x00 26. "STFERR_FAST,Stuff erro of CAN_FD data phase" "0,1"
bitfld.long 0x00 22.--25. "RSVD_25_22,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "ERROVR,error of overrun" "0,1"
bitfld.long 0x00 20. "ERRINT_FAST,error interrupt of errors detect in CAN_FD data phase" "0,1"
bitfld.long 0x00 19. "BUSOFFDONEINT,Bus off done interrupt" "0,1"
newline
bitfld.long 0x00 18. "SYNCH,Synchronous" "0,1"
bitfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt" "0,1"
bitfld.long 0x00 16. "RWRNINT,Rx warning Interrupt" "0,1"
bitfld.long 0x00 15. "BIT1ERR,Bit error of CAN non-fd" "0,1"
bitfld.long 0x00 14. "BIT0ERR,Bit0 error of CAN non-fd" "0,1"
newline
bitfld.long 0x00 13. "ACKERR,Acknowledge error of non-fd" "0,1"
bitfld.long 0x00 12. "CRCERR,CRC error of non-fd" "0,1"
bitfld.long 0x00 11. "FRAMERR,frame error of non-fd" "0,1"
bitfld.long 0x00 10. "STFERR,stuff erro of non-fd" "0,1"
bitfld.long 0x00 9. "TXWRN,tx warning" "0,1"
newline
bitfld.long 0x00 8. "RXWRN,Rx warning" "0,1"
bitfld.long 0x00 7. "IDLE,IDLE" "0,1"
bitfld.long 0x00 6. "TX,Flexcan in transmission" "0,1"
bitfld.long 0x00 4.--5. "FLTCONF,Fault confinement state" "0,1,2,3"
bitfld.long 0x00 3. "RX,Flexcan in Reception" "0,1"
newline
bitfld.long 0x00 2. "BOFFINT,bus off interrupt" "0,1"
bitfld.long 0x00 1. "ERRINT,error interrupt" "0,1"
bitfld.long 0x00 0. "WAKINT,wakeup interrupt" "0,1"
group.long 0x24++0x03
line.long 0x00 "CAN3_CAN_IMASK2,Interrupt mask 2 register(CAN_IMASK2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MB i Mask"
group.long 0x28++0x03
line.long 0x00 "CAN3_CAN_IMASK1,Interrupt mask 1 register(CAN_IMASK1)"
hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MB31 -0 Mask"
group.long 0x2C++0x03
line.long 0x00 "CAN3_CAN_IFLAG2,Interrupt flag 2 register(CAN_IFLAG2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MB63-32 Mask"
group.long 0x30++0x03
line.long 0x00 "CAN3_CAN_IFLAG1,Interrupt flag 1 register(CAN_IFLAG1)"
hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer8-31 interrupt"
bitfld.long 0x00 7. "BUF7I,Buffer7 interrupt" "0,1"
bitfld.long 0x00 6. "BUF6I,Buffer6 interrupt" "0,1"
bitfld.long 0x00 5. "BUF5I,Buffer5 interrupt" "0,1"
bitfld.long 0x00 1.--4. "BUF4TO1I,Buffer 1-4 interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "BUF0I,Buffer0 interrupt" "0,1"
group.long 0x34++0x03
line.long 0x00 "CAN3_CAN_CTRL2,Control 2 register(CAN_CTRL2)"
bitfld.long 0x00 31. "ERRMASK_FAST,error mask of can-fd" "0,1"
bitfld.long 0x00 30. "BOFFDONEMSK,bus off done mask" "0,1"
bitfld.long 0x00 29. "ECRWRE,error correction register write enable" "0,1"
bitfld.long 0x00 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0,1"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0,1"
bitfld.long 0x00 17. "RRS,Remote Request Storing" "0,1"
bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0,1"
bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0,1"
newline
bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0,1"
bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0,1"
hexmask.long.word 0x00 0.--10. 1. "RSVD_10_0,reserve"
group.long 0x38++0x03
line.long 0x00 "CAN3_CAN_ESR2,Error and Status 2 register(CAN_ESR2)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
bitfld.long 0x00 14. "VPS,Valid Priority Status" "0,1"
bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0,1"
newline
hexmask.long.word 0x00 0.--12. 1. "RSVD_12_0,reserve"
group.long 0x44++0x03
line.long 0x00 "CAN3_CAN_CRCR,CRC register(CAN_CRCR)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC Value"
group.long 0x48++0x03
line.long 0x00 "CAN3_CAN_RXFGMASK,Leagacy FIFO global mask register(CAN_RXFGMASK)"
hexmask.long 0x00 0.--31. 1. "FGM,Rx FIFO Global Mask Bits"
group.long 0x4C++0x03
line.long 0x00 "CAN3_CAN_RXFIR,RX FIFO ID indicator(CAN_RXFIR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,reserve"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,ID Hit incicator"
group.long 0x50++0x03
line.long 0x00 "CAN3_CAN_CBT,CAN bit timing register(CAN_CBT)"
bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0,1"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor"
bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x68++0x03
line.long 0x00 "CAN3_CAN_IMASK4,Interrupt mask 4 register(CAN_IMASK4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96M,Buffer MB 127-96 Mask"
group.long 0x6C++0x03
line.long 0x00 "CAN3_CAN_IMASK3,Interrupt mask 3 register(CAN_IMASK3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64M,Buffer MB 95-64 Mask"
group.long 0x70++0x03
line.long 0x00 "CAN3_CAN_IFLAG4,Interrupt flag 4 register(CAN_IFLAG4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96I,Buffer MB 127-96 Interrupt"
group.long 0x74++0x03
line.long 0x00 "CAN3_CAN_IFLAG3,Interrupt flag 3 register(CAN_IFLAG3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64I,Buffer MB 95-64 Interrupt"
group.long 0x80++0x03
line.long 0x00 "CAN3_CAN_MB0_CS,reserve"
bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1"
bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1"
bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1"
bitfld.long 0x00 28. "RSVD_28,reserve" "0,1"
bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RSVD_23,reserve" "0,1"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time Stamp"
group.long 0x84++0x03
line.long 0x00 "CAN3_CAN_MB0_ID,Message buffer ID register(CAN_MB0_ID)"
bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 18.--28. 1. "ID_STD_EXD,Frame Identifier"
hexmask.long.tbyte 0x00 0.--17. 1. "ID_EXTEND,Frame Identifier"
group.long 0x88++0x03
line.long 0x00 "CAN3_CAN_MB0_DATA03,Message buffer date03 register(CAN_MB0_DATA03)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE03,data byte0-3"
group.long 0x8C++0x03
line.long 0x00 "CAN3_CAN_MB0_DATA47,Message buffer date47 register(CAN_MB0_DAT47)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE47,data byte0-3"
group.long 0x880++0x03
line.long 0x00 "CAN3_CAN_RXIMRn,RX individual mask register(CAN_RXIMRn)"
hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits"
group.long 0xAE0++0x03
line.long 0x00 "CAN3_CAN_MECR,Memory error control register(CAN_MECR)"
bitfld.long 0x00 31. "ECRWRDIS,Error Configuration Register Write Disable" "0,1"
hexmask.long.word 0x00 20.--30. 1. "RSVD_30_20,reserve"
bitfld.long 0x00 19. "HANCEI_MSK,Host Access with Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 18. "FANCEI_MSK,CAN Access With Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 15. "HAERRI,Host Access Error Injection Enable" "0,1"
bitfld.long 0x00 14. "FAERRIE,CAN Access Error Injection Enable" "0,1"
bitfld.long 0x00 13. "EXTERRIE,Extended Error Injection" "0,1"
bitfld.long 0x00 10.--12. "RSVD_12_10,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "RERRDIS,Error Report Disable" "0,1"
bitfld.long 0x00 8. "ECCDIS,Error Correction Disable" "0,1"
bitfld.long 0x00 7. "NCEFAFRZ,Non-Correctable Errors In CAN Access Put Device In Freeze Mode" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "RSVD_6_0,reserve"
group.long 0xAE4++0x03
line.long 0x00 "CAN3_CAN_ERRIAR,Error injection address regsiter(CAN_ERRIAR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
hexmask.long.word 0x00 2.--13. 1. "INJADDR_H,Error Injection Address High"
bitfld.long 0x00 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3"
group.long 0xAE8++0x03
line.long 0x00 "CAN3_CAN_ERRIDPR,Error injection data pattern register(CAN_ERRIDPR)"
hexmask.long 0x00 0.--31. 1. "DFLIP,Data Flip Pattern"
group.long 0xAEC++0x03
line.long 0x00 "CAN3_CAN_ERRIPPR,Error injection parity pattern register(CAN_ERRIPPR)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "PFLIP2,Parity Flip Pattern For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "PFLIP1,Parity Flip Pattern For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "PFLIP0,Parity Flip Pattern For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAF0++0x03
line.long 0x00 "CAN3_CAN_RERRAR,Error report address register(CAN_RERRAR)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,reserve"
bitfld.long 0x00 24. "NCE,Non-Correctable Error: Indicates that the report is due to a non-correctable error" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "SAID,SAID[2]: Identification of the requestor of the memory read request SAID[1]: Details of FlexCAN operation SAID[0]: Operation that requested the memory" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--15. "RSVD_15_14,reserve" "0,1,2,3"
newline
hexmask.long.word 0x00 0.--13. 1. "ERRADDR,Address Where the Error was Detected"
group.long 0xAF4++0x03
line.long 0x00 "CAN3_CAN_RERRDR,Error report data register(CAN_RERRDR)"
hexmask.long 0x00 0.--31. 1. "RDATA,Raw data word read from memory with error"
group.long 0xAF8++0x03
line.long 0x00 "CAN3_CAN_RERRSYNR,Error report Syndrome reigster(CAN_RERRSYNR)"
bitfld.long 0x00 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,reserve" "0,1,2,3"
bitfld.long 0x00 24.--28. "SYND3,Error Syndrome For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "BE2,Error Syndrome For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 21.--22. "RSVD_22_21,reserve" "0,1,2,3"
newline
bitfld.long 0x00 16.--20. "SYND2,Error Syndrome For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "BE1,Byte Enabled For Byte 1" "0,1"
bitfld.long 0x00 13.--14. "RSVD_14_13,reserve" "0,1,2,3"
bitfld.long 0x00 8.--12. "SYND1,Error Syndrome For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0,1"
newline
bitfld.long 0x00 5.--6. "RSVD_6_5,reserve" "0,1,2,3"
bitfld.long 0x00 0.--4. "SYND0,Error Syndrome For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAFC++0x03
line.long 0x00 "CAN3_CAN_ERRSR,Error status register(CAN_ERRSR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 19. "HANCEIF,Host Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 18. "FANCEIF,CAN Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
bitfld.long 0x00 16. "CEIF,Correctable Error Interrupt Flag" "0,1"
newline
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 3. "HANCEIOF,Host Access with Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 2. "FANCEIOF,CAN Access With Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,reserve" "0,1"
bitfld.long 0x00 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0,1"
group.long 0xB00++0x03
line.long 0x00 "CAN3_CAN_CTRL1_PN,Pretend network control 1 register(CAN_CTRL1_PN)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0,1"
bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0,1,2,3"
bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0,1,2,3"
group.long 0xB04++0x03
line.long 0x00 "CAN3_CAN_CTRL2_PN,Pretend network control 2 register(CAN_CTRL2_PN)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria"
group.long 0xB08++0x03
line.long 0x00 "CAN3_CAN_WU_MTC,Pretend network wakeup match register(CAN_WU_MTC)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0,1"
bitfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xB0C++0x03
line.long 0x00 "CAN3_CAN_FLT_ID1,Pretend network ID filter 1 register(CAN_FLT_ID1)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "FLT_IDE,Number of Matches when in Pretended Networking" "0,1"
bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking Filtering"
group.long 0xB10++0x03
line.long 0x00 "CAN3_CAN_FLT_DLC,Pretend network DLC filter register(CAN_FLT_DLC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB14++0x03
line.long 0x00 "CAN3_CAN_PL1_LO,Pretend network payload low filter 1 register(CAN_PL1_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB18++0x03
line.long 0x00 "CAN3_CAN_PL1_HI,Pretend network payload high filter 1 register(CAN_PL1_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB1C++0x03
line.long 0x00 "CAN3_CAN_FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register(CAN_FLT_ID2_IDMASK)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0,1"
bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering/ ID Mask Bits for Pretended Networking ID Filtering"
group.long 0xB20++0x03
line.long 0x00 "CAN3_CAN_PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register(CAN_PL2_PLMASK_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB24++0x03
line.long 0x00 "CAN3_CAN_PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask Register (PL2_PLMASK_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB40++0x03
line.long 0x00 "CAN3_CAN_WMBn_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB44++0x03
line.long 0x00 "CAN3_CAN_WMBn_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB48++0x03
line.long 0x00 "CAN3_CAN_WMBn_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB4C++0x03
line.long 0x00 "CAN3_CAN_WMBn_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB50++0x03
line.long 0x00 "CAN3_CAN_WMB1_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB54++0x03
line.long 0x00 "CAN3_CAN_WMB1_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB58++0x03
line.long 0x00 "CAN3_CAN_WMB1_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB5C++0x03
line.long 0x00 "CAN3_CAN_WMB1_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB60++0x03
line.long 0x00 "CAN3_CAN_WMB2_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB64++0x03
line.long 0x00 "CAN3_CAN_WMB2_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB68++0x03
line.long 0x00 "CAN3_CAN_WMB2_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB6C++0x03
line.long 0x00 "CAN3_CAN_WMB2_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB70++0x03
line.long 0x00 "CAN3_CAN_WMB3_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB74++0x03
line.long 0x00 "CAN3_CAN_WMB3_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB78++0x03
line.long 0x00 "CAN3_CAN_WMB3_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB7C++0x03
line.long 0x00 "CAN3_CAN_WMB3_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xC00++0x03
line.long 0x00 "CAN3_CAN_FDCTRL,CAN FD control register(CAN_FDCTRL)"
bitfld.long 0x00 31. "FD_RATE,Bit Rate Switch Enable" "0,1"
bitfld.long 0x00 27.--30. "RSVD_30_27,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "MBDSR3,Message Buffer Data Size for Region 3" "0,1,2,3"
bitfld.long 0x00 24. "RSVD_24,reserve" "0,1"
bitfld.long 0x00 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0,1,2,3"
newline
bitfld.long 0x00 21. "RSVD_21,reserve" "0,1"
bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0,1,2,3"
bitfld.long 0x00 18. "RSVD_18,reserve" "0,1"
bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0,1,2,3"
bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0,1"
newline
bitfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xC04++0x03
line.long 0x00 "CAN3_CAN_FDCBT,CAN FD bit timing control register(CAN_FDCBT)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor"
bitfld.long 0x00 19. "RSVD_19,reserve" "0,1"
bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
newline
bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7"
group.long 0xC08++0x03
line.long 0x00 "CAN3_CAN_FDCRC,CAN FD CRC register(CAN_FDCRC)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value"
tree.end
tree "CAN4"
base ad:0x40044000
group.long 0x00++0x03
line.long 0x00 "CAN4_CAN_MCR,CAN module configure register(CAN_MCR)"
bitfld.long 0x00 31. "MDIS,Module Disable" "0,1"
bitfld.long 0x00 30. "FRZ,Freeze Enable" "0,1"
bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0,1"
bitfld.long 0x00 28. "HALT,Halt CAN" "0,1"
bitfld.long 0x00 27. "NOTRDY,CAN Not Ready" "0,1"
newline
bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0,1"
bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0,1"
bitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0,1"
bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0,1"
bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0,1"
newline
bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0,1"
bitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0,1"
bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0,1"
bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0,1"
bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0,1"
newline
bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0,1"
bitfld.long 0x00 15. "DMAE,DMA Enable" "0,1"
bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0,1"
bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0,1"
bitfld.long 0x00 12. "AEN,Abort Enable" "0,1"
newline
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0,1"
bitfld.long 0x00 10. "RSVD_10,reserve" "0,1"
bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0,1,2,3"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Reserved"
group.long 0x04++0x03
line.long 0x00 "CAN4_CAN_CTRL1,CONTROL 1 register(CAN_CTRL1)"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor"
bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "0,1"
newline
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "LPB,Loop Back Mode" "0,1"
bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0,1"
bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0,1"
bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0,1"
bitfld.long 0x00 5. "TSYC,Timer Sync" "0,1"
bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0,1"
newline
bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0,1"
bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "CAN4_CAN_TIMER,Free Running Timer register(CAN_TIMER)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "TIMER,free running counter value"
group.long 0x10++0x03
line.long 0x00 "CAN4_CAN_RXMGMSK,Rx mailbox global mask register(CAN_RXMGMSK)"
hexmask.long 0x00 0.--31. 1. "MG,Rx mailbox global mask"
group.long 0x14++0x03
line.long 0x00 "CAN4_CAN_RX14MASK,Rx 14 mask register(CAN_RX14MASK)"
hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits"
group.long 0x18++0x03
line.long 0x00 "CAN4_CAN_RX15MASK,Rx 15 mask register(CAN_RX15MASK)"
hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits"
group.long 0x1C++0x03
line.long 0x00 "CAN4_CAN_ECR,Error counter register(CAN_ECR)"
hexmask.long.byte 0x00 24.--31. 1. "RX_ERRCNT_FAST,Receive Error Counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TX_ERRCNT_FAST,Transmit Error Counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter"
hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter"
group.long 0x20++0x03
line.long 0x00 "CAN4_CAN_ESR1,CAN error status register(CAN_ESR1)"
bitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 29. "RSVD_29,reserve" "0,1"
bitfld.long 0x00 28. "CRCERR_FAST,CRC error in CAN_FD CRC phase" "0,1"
bitfld.long 0x00 27. "FRAMERR_FAST,Frame error of CAN_FD data phase" "0,1"
newline
bitfld.long 0x00 26. "STFERR_FAST,Stuff erro of CAN_FD data phase" "0,1"
bitfld.long 0x00 22.--25. "RSVD_25_22,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "ERROVR,error of overrun" "0,1"
bitfld.long 0x00 20. "ERRINT_FAST,error interrupt of errors detect in CAN_FD data phase" "0,1"
bitfld.long 0x00 19. "BUSOFFDONEINT,Bus off done interrupt" "0,1"
newline
bitfld.long 0x00 18. "SYNCH,Synchronous" "0,1"
bitfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt" "0,1"
bitfld.long 0x00 16. "RWRNINT,Rx warning Interrupt" "0,1"
bitfld.long 0x00 15. "BIT1ERR,Bit error of CAN non-fd" "0,1"
bitfld.long 0x00 14. "BIT0ERR,Bit0 error of CAN non-fd" "0,1"
newline
bitfld.long 0x00 13. "ACKERR,Acknowledge error of non-fd" "0,1"
bitfld.long 0x00 12. "CRCERR,CRC error of non-fd" "0,1"
bitfld.long 0x00 11. "FRAMERR,frame error of non-fd" "0,1"
bitfld.long 0x00 10. "STFERR,stuff erro of non-fd" "0,1"
bitfld.long 0x00 9. "TXWRN,tx warning" "0,1"
newline
bitfld.long 0x00 8. "RXWRN,Rx warning" "0,1"
bitfld.long 0x00 7. "IDLE,IDLE" "0,1"
bitfld.long 0x00 6. "TX,Flexcan in transmission" "0,1"
bitfld.long 0x00 4.--5. "FLTCONF,Fault confinement state" "0,1,2,3"
bitfld.long 0x00 3. "RX,Flexcan in Reception" "0,1"
newline
bitfld.long 0x00 2. "BOFFINT,bus off interrupt" "0,1"
bitfld.long 0x00 1. "ERRINT,error interrupt" "0,1"
bitfld.long 0x00 0. "WAKINT,wakeup interrupt" "0,1"
group.long 0x24++0x03
line.long 0x00 "CAN4_CAN_IMASK2,Interrupt mask 2 register(CAN_IMASK2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MB i Mask"
group.long 0x28++0x03
line.long 0x00 "CAN4_CAN_IMASK1,Interrupt mask 1 register(CAN_IMASK1)"
hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MB31 -0 Mask"
group.long 0x2C++0x03
line.long 0x00 "CAN4_CAN_IFLAG2,Interrupt flag 2 register(CAN_IFLAG2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MB63-32 Mask"
group.long 0x30++0x03
line.long 0x00 "CAN4_CAN_IFLAG1,Interrupt flag 1 register(CAN_IFLAG1)"
hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer8-31 interrupt"
bitfld.long 0x00 7. "BUF7I,Buffer7 interrupt" "0,1"
bitfld.long 0x00 6. "BUF6I,Buffer6 interrupt" "0,1"
bitfld.long 0x00 5. "BUF5I,Buffer5 interrupt" "0,1"
bitfld.long 0x00 1.--4. "BUF4TO1I,Buffer 1-4 interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "BUF0I,Buffer0 interrupt" "0,1"
group.long 0x34++0x03
line.long 0x00 "CAN4_CAN_CTRL2,Control 2 register(CAN_CTRL2)"
bitfld.long 0x00 31. "ERRMASK_FAST,error mask of can-fd" "0,1"
bitfld.long 0x00 30. "BOFFDONEMSK,bus off done mask" "0,1"
bitfld.long 0x00 29. "ECRWRE,error correction register write enable" "0,1"
bitfld.long 0x00 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0,1"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0,1"
bitfld.long 0x00 17. "RRS,Remote Request Storing" "0,1"
bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0,1"
bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0,1"
newline
bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0,1"
bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0,1"
hexmask.long.word 0x00 0.--10. 1. "RSVD_10_0,reserve"
group.long 0x38++0x03
line.long 0x00 "CAN4_CAN_ESR2,Error and Status 2 register(CAN_ESR2)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
bitfld.long 0x00 14. "VPS,Valid Priority Status" "0,1"
bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0,1"
newline
hexmask.long.word 0x00 0.--12. 1. "RSVD_12_0,reserve"
group.long 0x44++0x03
line.long 0x00 "CAN4_CAN_CRCR,CRC register(CAN_CRCR)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC Value"
group.long 0x48++0x03
line.long 0x00 "CAN4_CAN_RXFGMASK,Leagacy FIFO global mask register(CAN_RXFGMASK)"
hexmask.long 0x00 0.--31. 1. "FGM,Rx FIFO Global Mask Bits"
group.long 0x4C++0x03
line.long 0x00 "CAN4_CAN_RXFIR,RX FIFO ID indicator(CAN_RXFIR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,reserve"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,ID Hit incicator"
group.long 0x50++0x03
line.long 0x00 "CAN4_CAN_CBT,CAN bit timing register(CAN_CBT)"
bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0,1"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor"
bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x68++0x03
line.long 0x00 "CAN4_CAN_IMASK4,Interrupt mask 4 register(CAN_IMASK4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96M,Buffer MB 127-96 Mask"
group.long 0x6C++0x03
line.long 0x00 "CAN4_CAN_IMASK3,Interrupt mask 3 register(CAN_IMASK3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64M,Buffer MB 95-64 Mask"
group.long 0x70++0x03
line.long 0x00 "CAN4_CAN_IFLAG4,Interrupt flag 4 register(CAN_IFLAG4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96I,Buffer MB 127-96 Interrupt"
group.long 0x74++0x03
line.long 0x00 "CAN4_CAN_IFLAG3,Interrupt flag 3 register(CAN_IFLAG3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64I,Buffer MB 95-64 Interrupt"
group.long 0x80++0x03
line.long 0x00 "CAN4_CAN_MB0_CS,reserve"
bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1"
bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1"
bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1"
bitfld.long 0x00 28. "RSVD_28,reserve" "0,1"
bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RSVD_23,reserve" "0,1"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time Stamp"
group.long 0x84++0x03
line.long 0x00 "CAN4_CAN_MB0_ID,Message buffer ID register(CAN_MB0_ID)"
bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 18.--28. 1. "ID_STD_EXD,Frame Identifier"
hexmask.long.tbyte 0x00 0.--17. 1. "ID_EXTEND,Frame Identifier"
group.long 0x88++0x03
line.long 0x00 "CAN4_CAN_MB0_DATA03,Message buffer date03 register(CAN_MB0_DATA03)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE03,data byte0-3"
group.long 0x8C++0x03
line.long 0x00 "CAN4_CAN_MB0_DATA47,Message buffer date47 register(CAN_MB0_DAT47)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE47,data byte0-3"
group.long 0x880++0x03
line.long 0x00 "CAN4_CAN_RXIMRn,RX individual mask register(CAN_RXIMRn)"
hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits"
group.long 0xAE0++0x03
line.long 0x00 "CAN4_CAN_MECR,Memory error control register(CAN_MECR)"
bitfld.long 0x00 31. "ECRWRDIS,Error Configuration Register Write Disable" "0,1"
hexmask.long.word 0x00 20.--30. 1. "RSVD_30_20,reserve"
bitfld.long 0x00 19. "HANCEI_MSK,Host Access with Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 18. "FANCEI_MSK,CAN Access With Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 15. "HAERRI,Host Access Error Injection Enable" "0,1"
bitfld.long 0x00 14. "FAERRIE,CAN Access Error Injection Enable" "0,1"
bitfld.long 0x00 13. "EXTERRIE,Extended Error Injection" "0,1"
bitfld.long 0x00 10.--12. "RSVD_12_10,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "RERRDIS,Error Report Disable" "0,1"
bitfld.long 0x00 8. "ECCDIS,Error Correction Disable" "0,1"
bitfld.long 0x00 7. "NCEFAFRZ,Non-Correctable Errors In CAN Access Put Device In Freeze Mode" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "RSVD_6_0,reserve"
group.long 0xAE4++0x03
line.long 0x00 "CAN4_CAN_ERRIAR,Error injection address regsiter(CAN_ERRIAR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
hexmask.long.word 0x00 2.--13. 1. "INJADDR_H,Error Injection Address High"
bitfld.long 0x00 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3"
group.long 0xAE8++0x03
line.long 0x00 "CAN4_CAN_ERRIDPR,Error injection data pattern register(CAN_ERRIDPR)"
hexmask.long 0x00 0.--31. 1. "DFLIP,Data Flip Pattern"
group.long 0xAEC++0x03
line.long 0x00 "CAN4_CAN_ERRIPPR,Error injection parity pattern register(CAN_ERRIPPR)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "PFLIP2,Parity Flip Pattern For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "PFLIP1,Parity Flip Pattern For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "PFLIP0,Parity Flip Pattern For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAF0++0x03
line.long 0x00 "CAN4_CAN_RERRAR,Error report address register(CAN_RERRAR)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,reserve"
bitfld.long 0x00 24. "NCE,Non-Correctable Error: Indicates that the report is due to a non-correctable error" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "SAID,SAID[2]: Identification of the requestor of the memory read request SAID[1]: Details of FlexCAN operation SAID[0]: Operation that requested the memory" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--15. "RSVD_15_14,reserve" "0,1,2,3"
newline
hexmask.long.word 0x00 0.--13. 1. "ERRADDR,Address Where the Error was Detected"
group.long 0xAF4++0x03
line.long 0x00 "CAN4_CAN_RERRDR,Error report data register(CAN_RERRDR)"
hexmask.long 0x00 0.--31. 1. "RDATA,Raw data word read from memory with error"
group.long 0xAF8++0x03
line.long 0x00 "CAN4_CAN_RERRSYNR,Error report Syndrome reigster(CAN_RERRSYNR)"
bitfld.long 0x00 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,reserve" "0,1,2,3"
bitfld.long 0x00 24.--28. "SYND3,Error Syndrome For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "BE2,Error Syndrome For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 21.--22. "RSVD_22_21,reserve" "0,1,2,3"
newline
bitfld.long 0x00 16.--20. "SYND2,Error Syndrome For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "BE1,Byte Enabled For Byte 1" "0,1"
bitfld.long 0x00 13.--14. "RSVD_14_13,reserve" "0,1,2,3"
bitfld.long 0x00 8.--12. "SYND1,Error Syndrome For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0,1"
newline
bitfld.long 0x00 5.--6. "RSVD_6_5,reserve" "0,1,2,3"
bitfld.long 0x00 0.--4. "SYND0,Error Syndrome For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAFC++0x03
line.long 0x00 "CAN4_CAN_ERRSR,Error status register(CAN_ERRSR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 19. "HANCEIF,Host Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 18. "FANCEIF,CAN Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
bitfld.long 0x00 16. "CEIF,Correctable Error Interrupt Flag" "0,1"
newline
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 3. "HANCEIOF,Host Access with Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 2. "FANCEIOF,CAN Access With Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,reserve" "0,1"
bitfld.long 0x00 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0,1"
group.long 0xB00++0x03
line.long 0x00 "CAN4_CAN_CTRL1_PN,Pretend network control 1 register(CAN_CTRL1_PN)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0,1"
bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0,1,2,3"
bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0,1,2,3"
group.long 0xB04++0x03
line.long 0x00 "CAN4_CAN_CTRL2_PN,Pretend network control 2 register(CAN_CTRL2_PN)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria"
group.long 0xB08++0x03
line.long 0x00 "CAN4_CAN_WU_MTC,Pretend network wakeup match register(CAN_WU_MTC)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0,1"
bitfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xB0C++0x03
line.long 0x00 "CAN4_CAN_FLT_ID1,Pretend network ID filter 1 register(CAN_FLT_ID1)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "FLT_IDE,Number of Matches when in Pretended Networking" "0,1"
bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking Filtering"
group.long 0xB10++0x03
line.long 0x00 "CAN4_CAN_FLT_DLC,Pretend network DLC filter register(CAN_FLT_DLC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB14++0x03
line.long 0x00 "CAN4_CAN_PL1_LO,Pretend network payload low filter 1 register(CAN_PL1_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB18++0x03
line.long 0x00 "CAN4_CAN_PL1_HI,Pretend network payload high filter 1 register(CAN_PL1_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB1C++0x03
line.long 0x00 "CAN4_CAN_FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register(CAN_FLT_ID2_IDMASK)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0,1"
bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering/ ID Mask Bits for Pretended Networking ID Filtering"
group.long 0xB20++0x03
line.long 0x00 "CAN4_CAN_PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register(CAN_PL2_PLMASK_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB24++0x03
line.long 0x00 "CAN4_CAN_PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask Register (PL2_PLMASK_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB40++0x03
line.long 0x00 "CAN4_CAN_WMBn_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB44++0x03
line.long 0x00 "CAN4_CAN_WMBn_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB48++0x03
line.long 0x00 "CAN4_CAN_WMBn_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB4C++0x03
line.long 0x00 "CAN4_CAN_WMBn_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB50++0x03
line.long 0x00 "CAN4_CAN_WMB1_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB54++0x03
line.long 0x00 "CAN4_CAN_WMB1_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB58++0x03
line.long 0x00 "CAN4_CAN_WMB1_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB5C++0x03
line.long 0x00 "CAN4_CAN_WMB1_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB60++0x03
line.long 0x00 "CAN4_CAN_WMB2_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB64++0x03
line.long 0x00 "CAN4_CAN_WMB2_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB68++0x03
line.long 0x00 "CAN4_CAN_WMB2_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB6C++0x03
line.long 0x00 "CAN4_CAN_WMB2_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB70++0x03
line.long 0x00 "CAN4_CAN_WMB3_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB74++0x03
line.long 0x00 "CAN4_CAN_WMB3_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB78++0x03
line.long 0x00 "CAN4_CAN_WMB3_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB7C++0x03
line.long 0x00 "CAN4_CAN_WMB3_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xC00++0x03
line.long 0x00 "CAN4_CAN_FDCTRL,CAN FD control register(CAN_FDCTRL)"
bitfld.long 0x00 31. "FD_RATE,Bit Rate Switch Enable" "0,1"
bitfld.long 0x00 27.--30. "RSVD_30_27,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "MBDSR3,Message Buffer Data Size for Region 3" "0,1,2,3"
bitfld.long 0x00 24. "RSVD_24,reserve" "0,1"
bitfld.long 0x00 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0,1,2,3"
newline
bitfld.long 0x00 21. "RSVD_21,reserve" "0,1"
bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0,1,2,3"
bitfld.long 0x00 18. "RSVD_18,reserve" "0,1"
bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0,1,2,3"
bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0,1"
newline
bitfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xC04++0x03
line.long 0x00 "CAN4_CAN_FDCBT,CAN FD bit timing control register(CAN_FDCBT)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor"
bitfld.long 0x00 19. "RSVD_19,reserve" "0,1"
bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
newline
bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7"
group.long 0xC08++0x03
line.long 0x00 "CAN4_CAN_FDCRC,CAN FD CRC register(CAN_FDCRC)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value"
tree.end
tree "CAN5"
base ad:0x40045000
group.long 0x00++0x03
line.long 0x00 "CAN5_CAN_MCR,CAN module configure register(CAN_MCR)"
bitfld.long 0x00 31. "MDIS,Module Disable" "0,1"
bitfld.long 0x00 30. "FRZ,Freeze Enable" "0,1"
bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0,1"
bitfld.long 0x00 28. "HALT,Halt CAN" "0,1"
bitfld.long 0x00 27. "NOTRDY,CAN Not Ready" "0,1"
newline
bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0,1"
bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0,1"
bitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0,1"
bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0,1"
bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0,1"
newline
bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0,1"
bitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0,1"
bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0,1"
bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0,1"
bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0,1"
newline
bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0,1"
bitfld.long 0x00 15. "DMAE,DMA Enable" "0,1"
bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0,1"
bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0,1"
bitfld.long 0x00 12. "AEN,Abort Enable" "0,1"
newline
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0,1"
bitfld.long 0x00 10. "RSVD_10,reserve" "0,1"
bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0,1,2,3"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Reserved"
group.long 0x04++0x03
line.long 0x00 "CAN5_CAN_CTRL1,CONTROL 1 register(CAN_CTRL1)"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor"
bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "0,1"
newline
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "LPB,Loop Back Mode" "0,1"
bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0,1"
bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0,1"
bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0,1"
bitfld.long 0x00 5. "TSYC,Timer Sync" "0,1"
bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0,1"
newline
bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0,1"
bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "CAN5_CAN_TIMER,Free Running Timer register(CAN_TIMER)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "TIMER,free running counter value"
group.long 0x10++0x03
line.long 0x00 "CAN5_CAN_RXMGMSK,Rx mailbox global mask register(CAN_RXMGMSK)"
hexmask.long 0x00 0.--31. 1. "MG,Rx mailbox global mask"
group.long 0x14++0x03
line.long 0x00 "CAN5_CAN_RX14MASK,Rx 14 mask register(CAN_RX14MASK)"
hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits"
group.long 0x18++0x03
line.long 0x00 "CAN5_CAN_RX15MASK,Rx 15 mask register(CAN_RX15MASK)"
hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits"
group.long 0x1C++0x03
line.long 0x00 "CAN5_CAN_ECR,Error counter register(CAN_ECR)"
hexmask.long.byte 0x00 24.--31. 1. "RX_ERRCNT_FAST,Receive Error Counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TX_ERRCNT_FAST,Transmit Error Counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter"
hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter"
group.long 0x20++0x03
line.long 0x00 "CAN5_CAN_ESR1,CAN error status register(CAN_ESR1)"
bitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 29. "RSVD_29,reserve" "0,1"
bitfld.long 0x00 28. "CRCERR_FAST,CRC error in CAN_FD CRC phase" "0,1"
bitfld.long 0x00 27. "FRAMERR_FAST,Frame error of CAN_FD data phase" "0,1"
newline
bitfld.long 0x00 26. "STFERR_FAST,Stuff erro of CAN_FD data phase" "0,1"
bitfld.long 0x00 22.--25. "RSVD_25_22,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "ERROVR,error of overrun" "0,1"
bitfld.long 0x00 20. "ERRINT_FAST,error interrupt of errors detect in CAN_FD data phase" "0,1"
bitfld.long 0x00 19. "BUSOFFDONEINT,Bus off done interrupt" "0,1"
newline
bitfld.long 0x00 18. "SYNCH,Synchronous" "0,1"
bitfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt" "0,1"
bitfld.long 0x00 16. "RWRNINT,Rx warning Interrupt" "0,1"
bitfld.long 0x00 15. "BIT1ERR,Bit error of CAN non-fd" "0,1"
bitfld.long 0x00 14. "BIT0ERR,Bit0 error of CAN non-fd" "0,1"
newline
bitfld.long 0x00 13. "ACKERR,Acknowledge error of non-fd" "0,1"
bitfld.long 0x00 12. "CRCERR,CRC error of non-fd" "0,1"
bitfld.long 0x00 11. "FRAMERR,frame error of non-fd" "0,1"
bitfld.long 0x00 10. "STFERR,stuff erro of non-fd" "0,1"
bitfld.long 0x00 9. "TXWRN,tx warning" "0,1"
newline
bitfld.long 0x00 8. "RXWRN,Rx warning" "0,1"
bitfld.long 0x00 7. "IDLE,IDLE" "0,1"
bitfld.long 0x00 6. "TX,Flexcan in transmission" "0,1"
bitfld.long 0x00 4.--5. "FLTCONF,Fault confinement state" "0,1,2,3"
bitfld.long 0x00 3. "RX,Flexcan in Reception" "0,1"
newline
bitfld.long 0x00 2. "BOFFINT,bus off interrupt" "0,1"
bitfld.long 0x00 1. "ERRINT,error interrupt" "0,1"
bitfld.long 0x00 0. "WAKINT,wakeup interrupt" "0,1"
group.long 0x24++0x03
line.long 0x00 "CAN5_CAN_IMASK2,Interrupt mask 2 register(CAN_IMASK2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MB i Mask"
group.long 0x28++0x03
line.long 0x00 "CAN5_CAN_IMASK1,Interrupt mask 1 register(CAN_IMASK1)"
hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MB31 -0 Mask"
group.long 0x2C++0x03
line.long 0x00 "CAN5_CAN_IFLAG2,Interrupt flag 2 register(CAN_IFLAG2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MB63-32 Mask"
group.long 0x30++0x03
line.long 0x00 "CAN5_CAN_IFLAG1,Interrupt flag 1 register(CAN_IFLAG1)"
hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer8-31 interrupt"
bitfld.long 0x00 7. "BUF7I,Buffer7 interrupt" "0,1"
bitfld.long 0x00 6. "BUF6I,Buffer6 interrupt" "0,1"
bitfld.long 0x00 5. "BUF5I,Buffer5 interrupt" "0,1"
bitfld.long 0x00 1.--4. "BUF4TO1I,Buffer 1-4 interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "BUF0I,Buffer0 interrupt" "0,1"
group.long 0x34++0x03
line.long 0x00 "CAN5_CAN_CTRL2,Control 2 register(CAN_CTRL2)"
bitfld.long 0x00 31. "ERRMASK_FAST,error mask of can-fd" "0,1"
bitfld.long 0x00 30. "BOFFDONEMSK,bus off done mask" "0,1"
bitfld.long 0x00 29. "ECRWRE,error correction register write enable" "0,1"
bitfld.long 0x00 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0,1"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0,1"
bitfld.long 0x00 17. "RRS,Remote Request Storing" "0,1"
bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0,1"
bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0,1"
newline
bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0,1"
bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0,1"
hexmask.long.word 0x00 0.--10. 1. "RSVD_10_0,reserve"
group.long 0x38++0x03
line.long 0x00 "CAN5_CAN_ESR2,Error and Status 2 register(CAN_ESR2)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
bitfld.long 0x00 14. "VPS,Valid Priority Status" "0,1"
bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0,1"
newline
hexmask.long.word 0x00 0.--12. 1. "RSVD_12_0,reserve"
group.long 0x44++0x03
line.long 0x00 "CAN5_CAN_CRCR,CRC register(CAN_CRCR)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC Value"
group.long 0x48++0x03
line.long 0x00 "CAN5_CAN_RXFGMASK,Leagacy FIFO global mask register(CAN_RXFGMASK)"
hexmask.long 0x00 0.--31. 1. "FGM,Rx FIFO Global Mask Bits"
group.long 0x4C++0x03
line.long 0x00 "CAN5_CAN_RXFIR,RX FIFO ID indicator(CAN_RXFIR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,reserve"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,ID Hit incicator"
group.long 0x50++0x03
line.long 0x00 "CAN5_CAN_CBT,CAN bit timing register(CAN_CBT)"
bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0,1"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor"
bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x68++0x03
line.long 0x00 "CAN5_CAN_IMASK4,Interrupt mask 4 register(CAN_IMASK4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96M,Buffer MB 127-96 Mask"
group.long 0x6C++0x03
line.long 0x00 "CAN5_CAN_IMASK3,Interrupt mask 3 register(CAN_IMASK3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64M,Buffer MB 95-64 Mask"
group.long 0x70++0x03
line.long 0x00 "CAN5_CAN_IFLAG4,Interrupt flag 4 register(CAN_IFLAG4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96I,Buffer MB 127-96 Interrupt"
group.long 0x74++0x03
line.long 0x00 "CAN5_CAN_IFLAG3,Interrupt flag 3 register(CAN_IFLAG3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64I,Buffer MB 95-64 Interrupt"
group.long 0x80++0x03
line.long 0x00 "CAN5_CAN_MB0_CS,reserve"
bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1"
bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1"
bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1"
bitfld.long 0x00 28. "RSVD_28,reserve" "0,1"
bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RSVD_23,reserve" "0,1"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time Stamp"
group.long 0x84++0x03
line.long 0x00 "CAN5_CAN_MB0_ID,Message buffer ID register(CAN_MB0_ID)"
bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 18.--28. 1. "ID_STD_EXD,Frame Identifier"
hexmask.long.tbyte 0x00 0.--17. 1. "ID_EXTEND,Frame Identifier"
group.long 0x88++0x03
line.long 0x00 "CAN5_CAN_MB0_DATA03,Message buffer date03 register(CAN_MB0_DATA03)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE03,data byte0-3"
group.long 0x8C++0x03
line.long 0x00 "CAN5_CAN_MB0_DATA47,Message buffer date47 register(CAN_MB0_DAT47)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE47,data byte0-3"
group.long 0x880++0x03
line.long 0x00 "CAN5_CAN_RXIMRn,RX individual mask register(CAN_RXIMRn)"
hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits"
group.long 0xAE0++0x03
line.long 0x00 "CAN5_CAN_MECR,Memory error control register(CAN_MECR)"
bitfld.long 0x00 31. "ECRWRDIS,Error Configuration Register Write Disable" "0,1"
hexmask.long.word 0x00 20.--30. 1. "RSVD_30_20,reserve"
bitfld.long 0x00 19. "HANCEI_MSK,Host Access with Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 18. "FANCEI_MSK,CAN Access With Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 15. "HAERRI,Host Access Error Injection Enable" "0,1"
bitfld.long 0x00 14. "FAERRIE,CAN Access Error Injection Enable" "0,1"
bitfld.long 0x00 13. "EXTERRIE,Extended Error Injection" "0,1"
bitfld.long 0x00 10.--12. "RSVD_12_10,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "RERRDIS,Error Report Disable" "0,1"
bitfld.long 0x00 8. "ECCDIS,Error Correction Disable" "0,1"
bitfld.long 0x00 7. "NCEFAFRZ,Non-Correctable Errors In CAN Access Put Device In Freeze Mode" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "RSVD_6_0,reserve"
group.long 0xAE4++0x03
line.long 0x00 "CAN5_CAN_ERRIAR,Error injection address regsiter(CAN_ERRIAR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
hexmask.long.word 0x00 2.--13. 1. "INJADDR_H,Error Injection Address High"
bitfld.long 0x00 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3"
group.long 0xAE8++0x03
line.long 0x00 "CAN5_CAN_ERRIDPR,Error injection data pattern register(CAN_ERRIDPR)"
hexmask.long 0x00 0.--31. 1. "DFLIP,Data Flip Pattern"
group.long 0xAEC++0x03
line.long 0x00 "CAN5_CAN_ERRIPPR,Error injection parity pattern register(CAN_ERRIPPR)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "PFLIP2,Parity Flip Pattern For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "PFLIP1,Parity Flip Pattern For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "PFLIP0,Parity Flip Pattern For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAF0++0x03
line.long 0x00 "CAN5_CAN_RERRAR,Error report address register(CAN_RERRAR)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,reserve"
bitfld.long 0x00 24. "NCE,Non-Correctable Error: Indicates that the report is due to a non-correctable error" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "SAID,SAID[2]: Identification of the requestor of the memory read request SAID[1]: Details of FlexCAN operation SAID[0]: Operation that requested the memory" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--15. "RSVD_15_14,reserve" "0,1,2,3"
newline
hexmask.long.word 0x00 0.--13. 1. "ERRADDR,Address Where the Error was Detected"
group.long 0xAF4++0x03
line.long 0x00 "CAN5_CAN_RERRDR,Error report data register(CAN_RERRDR)"
hexmask.long 0x00 0.--31. 1. "RDATA,Raw data word read from memory with error"
group.long 0xAF8++0x03
line.long 0x00 "CAN5_CAN_RERRSYNR,Error report Syndrome reigster(CAN_RERRSYNR)"
bitfld.long 0x00 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,reserve" "0,1,2,3"
bitfld.long 0x00 24.--28. "SYND3,Error Syndrome For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "BE2,Error Syndrome For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 21.--22. "RSVD_22_21,reserve" "0,1,2,3"
newline
bitfld.long 0x00 16.--20. "SYND2,Error Syndrome For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "BE1,Byte Enabled For Byte 1" "0,1"
bitfld.long 0x00 13.--14. "RSVD_14_13,reserve" "0,1,2,3"
bitfld.long 0x00 8.--12. "SYND1,Error Syndrome For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0,1"
newline
bitfld.long 0x00 5.--6. "RSVD_6_5,reserve" "0,1,2,3"
bitfld.long 0x00 0.--4. "SYND0,Error Syndrome For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAFC++0x03
line.long 0x00 "CAN5_CAN_ERRSR,Error status register(CAN_ERRSR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 19. "HANCEIF,Host Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 18. "FANCEIF,CAN Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
bitfld.long 0x00 16. "CEIF,Correctable Error Interrupt Flag" "0,1"
newline
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 3. "HANCEIOF,Host Access with Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 2. "FANCEIOF,CAN Access With Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,reserve" "0,1"
bitfld.long 0x00 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0,1"
group.long 0xB00++0x03
line.long 0x00 "CAN5_CAN_CTRL1_PN,Pretend network control 1 register(CAN_CTRL1_PN)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0,1"
bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0,1,2,3"
bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0,1,2,3"
group.long 0xB04++0x03
line.long 0x00 "CAN5_CAN_CTRL2_PN,Pretend network control 2 register(CAN_CTRL2_PN)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria"
group.long 0xB08++0x03
line.long 0x00 "CAN5_CAN_WU_MTC,Pretend network wakeup match register(CAN_WU_MTC)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0,1"
bitfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xB0C++0x03
line.long 0x00 "CAN5_CAN_FLT_ID1,Pretend network ID filter 1 register(CAN_FLT_ID1)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "FLT_IDE,Number of Matches when in Pretended Networking" "0,1"
bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking Filtering"
group.long 0xB10++0x03
line.long 0x00 "CAN5_CAN_FLT_DLC,Pretend network DLC filter register(CAN_FLT_DLC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB14++0x03
line.long 0x00 "CAN5_CAN_PL1_LO,Pretend network payload low filter 1 register(CAN_PL1_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB18++0x03
line.long 0x00 "CAN5_CAN_PL1_HI,Pretend network payload high filter 1 register(CAN_PL1_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB1C++0x03
line.long 0x00 "CAN5_CAN_FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register(CAN_FLT_ID2_IDMASK)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0,1"
bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering/ ID Mask Bits for Pretended Networking ID Filtering"
group.long 0xB20++0x03
line.long 0x00 "CAN5_CAN_PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register(CAN_PL2_PLMASK_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB24++0x03
line.long 0x00 "CAN5_CAN_PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask Register (PL2_PLMASK_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB40++0x03
line.long 0x00 "CAN5_CAN_WMBn_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB44++0x03
line.long 0x00 "CAN5_CAN_WMBn_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB48++0x03
line.long 0x00 "CAN5_CAN_WMBn_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB4C++0x03
line.long 0x00 "CAN5_CAN_WMBn_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB50++0x03
line.long 0x00 "CAN5_CAN_WMB1_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB54++0x03
line.long 0x00 "CAN5_CAN_WMB1_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB58++0x03
line.long 0x00 "CAN5_CAN_WMB1_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB5C++0x03
line.long 0x00 "CAN5_CAN_WMB1_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB60++0x03
line.long 0x00 "CAN5_CAN_WMB2_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB64++0x03
line.long 0x00 "CAN5_CAN_WMB2_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB68++0x03
line.long 0x00 "CAN5_CAN_WMB2_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB6C++0x03
line.long 0x00 "CAN5_CAN_WMB2_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB70++0x03
line.long 0x00 "CAN5_CAN_WMB3_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB74++0x03
line.long 0x00 "CAN5_CAN_WMB3_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB78++0x03
line.long 0x00 "CAN5_CAN_WMB3_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB7C++0x03
line.long 0x00 "CAN5_CAN_WMB3_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xC00++0x03
line.long 0x00 "CAN5_CAN_FDCTRL,CAN FD control register(CAN_FDCTRL)"
bitfld.long 0x00 31. "FD_RATE,Bit Rate Switch Enable" "0,1"
bitfld.long 0x00 27.--30. "RSVD_30_27,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "MBDSR3,Message Buffer Data Size for Region 3" "0,1,2,3"
bitfld.long 0x00 24. "RSVD_24,reserve" "0,1"
bitfld.long 0x00 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0,1,2,3"
newline
bitfld.long 0x00 21. "RSVD_21,reserve" "0,1"
bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0,1,2,3"
bitfld.long 0x00 18. "RSVD_18,reserve" "0,1"
bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0,1,2,3"
bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0,1"
newline
bitfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xC04++0x03
line.long 0x00 "CAN5_CAN_FDCBT,CAN FD bit timing control register(CAN_FDCBT)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor"
bitfld.long 0x00 19. "RSVD_19,reserve" "0,1"
bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
newline
bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7"
group.long 0xC08++0x03
line.long 0x00 "CAN5_CAN_FDCRC,CAN FD CRC register(CAN_FDCRC)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value"
tree.end
tree "CAN6"
base ad:0x40056000
group.long 0x00++0x03
line.long 0x00 "CAN6_CAN_MCR,CAN module configure register(CAN_MCR)"
bitfld.long 0x00 31. "MDIS,Module Disable" "0,1"
bitfld.long 0x00 30. "FRZ,Freeze Enable" "0,1"
bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0,1"
bitfld.long 0x00 28. "HALT,Halt CAN" "0,1"
bitfld.long 0x00 27. "NOTRDY,CAN Not Ready" "0,1"
newline
bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0,1"
bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0,1"
bitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0,1"
bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0,1"
bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0,1"
newline
bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0,1"
bitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0,1"
bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0,1"
bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0,1"
bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0,1"
newline
bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0,1"
bitfld.long 0x00 15. "DMAE,DMA Enable" "0,1"
bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0,1"
bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0,1"
bitfld.long 0x00 12. "AEN,Abort Enable" "0,1"
newline
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0,1"
bitfld.long 0x00 10. "RSVD_10,reserve" "0,1"
bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0,1,2,3"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Reserved"
group.long 0x04++0x03
line.long 0x00 "CAN6_CAN_CTRL1,CONTROL 1 register(CAN_CTRL1)"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor"
bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "0,1"
newline
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "LPB,Loop Back Mode" "0,1"
bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0,1"
bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0,1"
bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0,1"
bitfld.long 0x00 5. "TSYC,Timer Sync" "0,1"
bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0,1"
newline
bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0,1"
bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "CAN6_CAN_TIMER,Free Running Timer register(CAN_TIMER)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "TIMER,free running counter value"
group.long 0x10++0x03
line.long 0x00 "CAN6_CAN_RXMGMSK,Rx mailbox global mask register(CAN_RXMGMSK)"
hexmask.long 0x00 0.--31. 1. "MG,Rx mailbox global mask"
group.long 0x14++0x03
line.long 0x00 "CAN6_CAN_RX14MASK,Rx 14 mask register(CAN_RX14MASK)"
hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits"
group.long 0x18++0x03
line.long 0x00 "CAN6_CAN_RX15MASK,Rx 15 mask register(CAN_RX15MASK)"
hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits"
group.long 0x1C++0x03
line.long 0x00 "CAN6_CAN_ECR,Error counter register(CAN_ECR)"
hexmask.long.byte 0x00 24.--31. 1. "RX_ERRCNT_FAST,Receive Error Counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TX_ERRCNT_FAST,Transmit Error Counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter"
hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter"
group.long 0x20++0x03
line.long 0x00 "CAN6_CAN_ESR1,CAN error status register(CAN_ESR1)"
bitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 29. "RSVD_29,reserve" "0,1"
bitfld.long 0x00 28. "CRCERR_FAST,CRC error in CAN_FD CRC phase" "0,1"
bitfld.long 0x00 27. "FRAMERR_FAST,Frame error of CAN_FD data phase" "0,1"
newline
bitfld.long 0x00 26. "STFERR_FAST,Stuff erro of CAN_FD data phase" "0,1"
bitfld.long 0x00 22.--25. "RSVD_25_22,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "ERROVR,error of overrun" "0,1"
bitfld.long 0x00 20. "ERRINT_FAST,error interrupt of errors detect in CAN_FD data phase" "0,1"
bitfld.long 0x00 19. "BUSOFFDONEINT,Bus off done interrupt" "0,1"
newline
bitfld.long 0x00 18. "SYNCH,Synchronous" "0,1"
bitfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt" "0,1"
bitfld.long 0x00 16. "RWRNINT,Rx warning Interrupt" "0,1"
bitfld.long 0x00 15. "BIT1ERR,Bit error of CAN non-fd" "0,1"
bitfld.long 0x00 14. "BIT0ERR,Bit0 error of CAN non-fd" "0,1"
newline
bitfld.long 0x00 13. "ACKERR,Acknowledge error of non-fd" "0,1"
bitfld.long 0x00 12. "CRCERR,CRC error of non-fd" "0,1"
bitfld.long 0x00 11. "FRAMERR,frame error of non-fd" "0,1"
bitfld.long 0x00 10. "STFERR,stuff erro of non-fd" "0,1"
bitfld.long 0x00 9. "TXWRN,tx warning" "0,1"
newline
bitfld.long 0x00 8. "RXWRN,Rx warning" "0,1"
bitfld.long 0x00 7. "IDLE,IDLE" "0,1"
bitfld.long 0x00 6. "TX,Flexcan in transmission" "0,1"
bitfld.long 0x00 4.--5. "FLTCONF,Fault confinement state" "0,1,2,3"
bitfld.long 0x00 3. "RX,Flexcan in Reception" "0,1"
newline
bitfld.long 0x00 2. "BOFFINT,bus off interrupt" "0,1"
bitfld.long 0x00 1. "ERRINT,error interrupt" "0,1"
bitfld.long 0x00 0. "WAKINT,wakeup interrupt" "0,1"
group.long 0x24++0x03
line.long 0x00 "CAN6_CAN_IMASK2,Interrupt mask 2 register(CAN_IMASK2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MB i Mask"
group.long 0x28++0x03
line.long 0x00 "CAN6_CAN_IMASK1,Interrupt mask 1 register(CAN_IMASK1)"
hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MB31 -0 Mask"
group.long 0x2C++0x03
line.long 0x00 "CAN6_CAN_IFLAG2,Interrupt flag 2 register(CAN_IFLAG2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MB63-32 Mask"
group.long 0x30++0x03
line.long 0x00 "CAN6_CAN_IFLAG1,Interrupt flag 1 register(CAN_IFLAG1)"
hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer8-31 interrupt"
bitfld.long 0x00 7. "BUF7I,Buffer7 interrupt" "0,1"
bitfld.long 0x00 6. "BUF6I,Buffer6 interrupt" "0,1"
bitfld.long 0x00 5. "BUF5I,Buffer5 interrupt" "0,1"
bitfld.long 0x00 1.--4. "BUF4TO1I,Buffer 1-4 interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "BUF0I,Buffer0 interrupt" "0,1"
group.long 0x34++0x03
line.long 0x00 "CAN6_CAN_CTRL2,Control 2 register(CAN_CTRL2)"
bitfld.long 0x00 31. "ERRMASK_FAST,error mask of can-fd" "0,1"
bitfld.long 0x00 30. "BOFFDONEMSK,bus off done mask" "0,1"
bitfld.long 0x00 29. "ECRWRE,error correction register write enable" "0,1"
bitfld.long 0x00 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0,1"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0,1"
bitfld.long 0x00 17. "RRS,Remote Request Storing" "0,1"
bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0,1"
bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0,1"
newline
bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0,1"
bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0,1"
hexmask.long.word 0x00 0.--10. 1. "RSVD_10_0,reserve"
group.long 0x38++0x03
line.long 0x00 "CAN6_CAN_ESR2,Error and Status 2 register(CAN_ESR2)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
bitfld.long 0x00 14. "VPS,Valid Priority Status" "0,1"
bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0,1"
newline
hexmask.long.word 0x00 0.--12. 1. "RSVD_12_0,reserve"
group.long 0x44++0x03
line.long 0x00 "CAN6_CAN_CRCR,CRC register(CAN_CRCR)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC Value"
group.long 0x48++0x03
line.long 0x00 "CAN6_CAN_RXFGMASK,Leagacy FIFO global mask register(CAN_RXFGMASK)"
hexmask.long 0x00 0.--31. 1. "FGM,Rx FIFO Global Mask Bits"
group.long 0x4C++0x03
line.long 0x00 "CAN6_CAN_RXFIR,RX FIFO ID indicator(CAN_RXFIR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,reserve"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,ID Hit incicator"
group.long 0x50++0x03
line.long 0x00 "CAN6_CAN_CBT,CAN bit timing register(CAN_CBT)"
bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0,1"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor"
bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x68++0x03
line.long 0x00 "CAN6_CAN_IMASK4,Interrupt mask 4 register(CAN_IMASK4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96M,Buffer MB 127-96 Mask"
group.long 0x6C++0x03
line.long 0x00 "CAN6_CAN_IMASK3,Interrupt mask 3 register(CAN_IMASK3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64M,Buffer MB 95-64 Mask"
group.long 0x70++0x03
line.long 0x00 "CAN6_CAN_IFLAG4,Interrupt flag 4 register(CAN_IFLAG4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96I,Buffer MB 127-96 Interrupt"
group.long 0x74++0x03
line.long 0x00 "CAN6_CAN_IFLAG3,Interrupt flag 3 register(CAN_IFLAG3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64I,Buffer MB 95-64 Interrupt"
group.long 0x80++0x03
line.long 0x00 "CAN6_CAN_MB0_CS,reserve"
bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1"
bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1"
bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1"
bitfld.long 0x00 28. "RSVD_28,reserve" "0,1"
bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RSVD_23,reserve" "0,1"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time Stamp"
group.long 0x84++0x03
line.long 0x00 "CAN6_CAN_MB0_ID,Message buffer ID register(CAN_MB0_ID)"
bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 18.--28. 1. "ID_STD_EXD,Frame Identifier"
hexmask.long.tbyte 0x00 0.--17. 1. "ID_EXTEND,Frame Identifier"
group.long 0x88++0x03
line.long 0x00 "CAN6_CAN_MB0_DATA03,Message buffer date03 register(CAN_MB0_DATA03)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE03,data byte0-3"
group.long 0x8C++0x03
line.long 0x00 "CAN6_CAN_MB0_DATA47,Message buffer date47 register(CAN_MB0_DAT47)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE47,data byte0-3"
group.long 0x880++0x03
line.long 0x00 "CAN6_CAN_RXIMRn,RX individual mask register(CAN_RXIMRn)"
hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits"
group.long 0xAE0++0x03
line.long 0x00 "CAN6_CAN_MECR,Memory error control register(CAN_MECR)"
bitfld.long 0x00 31. "ECRWRDIS,Error Configuration Register Write Disable" "0,1"
hexmask.long.word 0x00 20.--30. 1. "RSVD_30_20,reserve"
bitfld.long 0x00 19. "HANCEI_MSK,Host Access with Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 18. "FANCEI_MSK,CAN Access With Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 15. "HAERRI,Host Access Error Injection Enable" "0,1"
bitfld.long 0x00 14. "FAERRIE,CAN Access Error Injection Enable" "0,1"
bitfld.long 0x00 13. "EXTERRIE,Extended Error Injection" "0,1"
bitfld.long 0x00 10.--12. "RSVD_12_10,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "RERRDIS,Error Report Disable" "0,1"
bitfld.long 0x00 8. "ECCDIS,Error Correction Disable" "0,1"
bitfld.long 0x00 7. "NCEFAFRZ,Non-Correctable Errors In CAN Access Put Device In Freeze Mode" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "RSVD_6_0,reserve"
group.long 0xAE4++0x03
line.long 0x00 "CAN6_CAN_ERRIAR,Error injection address regsiter(CAN_ERRIAR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
hexmask.long.word 0x00 2.--13. 1. "INJADDR_H,Error Injection Address High"
bitfld.long 0x00 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3"
group.long 0xAE8++0x03
line.long 0x00 "CAN6_CAN_ERRIDPR,Error injection data pattern register(CAN_ERRIDPR)"
hexmask.long 0x00 0.--31. 1. "DFLIP,Data Flip Pattern"
group.long 0xAEC++0x03
line.long 0x00 "CAN6_CAN_ERRIPPR,Error injection parity pattern register(CAN_ERRIPPR)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "PFLIP2,Parity Flip Pattern For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "PFLIP1,Parity Flip Pattern For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "PFLIP0,Parity Flip Pattern For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAF0++0x03
line.long 0x00 "CAN6_CAN_RERRAR,Error report address register(CAN_RERRAR)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,reserve"
bitfld.long 0x00 24. "NCE,Non-Correctable Error: Indicates that the report is due to a non-correctable error" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "SAID,SAID[2]: Identification of the requestor of the memory read request SAID[1]: Details of FlexCAN operation SAID[0]: Operation that requested the memory" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--15. "RSVD_15_14,reserve" "0,1,2,3"
newline
hexmask.long.word 0x00 0.--13. 1. "ERRADDR,Address Where the Error was Detected"
group.long 0xAF4++0x03
line.long 0x00 "CAN6_CAN_RERRDR,Error report data register(CAN_RERRDR)"
hexmask.long 0x00 0.--31. 1. "RDATA,Raw data word read from memory with error"
group.long 0xAF8++0x03
line.long 0x00 "CAN6_CAN_RERRSYNR,Error report Syndrome reigster(CAN_RERRSYNR)"
bitfld.long 0x00 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,reserve" "0,1,2,3"
bitfld.long 0x00 24.--28. "SYND3,Error Syndrome For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "BE2,Error Syndrome For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 21.--22. "RSVD_22_21,reserve" "0,1,2,3"
newline
bitfld.long 0x00 16.--20. "SYND2,Error Syndrome For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "BE1,Byte Enabled For Byte 1" "0,1"
bitfld.long 0x00 13.--14. "RSVD_14_13,reserve" "0,1,2,3"
bitfld.long 0x00 8.--12. "SYND1,Error Syndrome For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0,1"
newline
bitfld.long 0x00 5.--6. "RSVD_6_5,reserve" "0,1,2,3"
bitfld.long 0x00 0.--4. "SYND0,Error Syndrome For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAFC++0x03
line.long 0x00 "CAN6_CAN_ERRSR,Error status register(CAN_ERRSR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 19. "HANCEIF,Host Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 18. "FANCEIF,CAN Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
bitfld.long 0x00 16. "CEIF,Correctable Error Interrupt Flag" "0,1"
newline
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 3. "HANCEIOF,Host Access with Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 2. "FANCEIOF,CAN Access With Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,reserve" "0,1"
bitfld.long 0x00 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0,1"
group.long 0xB00++0x03
line.long 0x00 "CAN6_CAN_CTRL1_PN,Pretend network control 1 register(CAN_CTRL1_PN)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0,1"
bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0,1,2,3"
bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0,1,2,3"
group.long 0xB04++0x03
line.long 0x00 "CAN6_CAN_CTRL2_PN,Pretend network control 2 register(CAN_CTRL2_PN)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria"
group.long 0xB08++0x03
line.long 0x00 "CAN6_CAN_WU_MTC,Pretend network wakeup match register(CAN_WU_MTC)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0,1"
bitfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xB0C++0x03
line.long 0x00 "CAN6_CAN_FLT_ID1,Pretend network ID filter 1 register(CAN_FLT_ID1)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "FLT_IDE,Number of Matches when in Pretended Networking" "0,1"
bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking Filtering"
group.long 0xB10++0x03
line.long 0x00 "CAN6_CAN_FLT_DLC,Pretend network DLC filter register(CAN_FLT_DLC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB14++0x03
line.long 0x00 "CAN6_CAN_PL1_LO,Pretend network payload low filter 1 register(CAN_PL1_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB18++0x03
line.long 0x00 "CAN6_CAN_PL1_HI,Pretend network payload high filter 1 register(CAN_PL1_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB1C++0x03
line.long 0x00 "CAN6_CAN_FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register(CAN_FLT_ID2_IDMASK)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0,1"
bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering/ ID Mask Bits for Pretended Networking ID Filtering"
group.long 0xB20++0x03
line.long 0x00 "CAN6_CAN_PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register(CAN_PL2_PLMASK_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB24++0x03
line.long 0x00 "CAN6_CAN_PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask Register (PL2_PLMASK_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB40++0x03
line.long 0x00 "CAN6_CAN_WMBn_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB44++0x03
line.long 0x00 "CAN6_CAN_WMBn_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB48++0x03
line.long 0x00 "CAN6_CAN_WMBn_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB4C++0x03
line.long 0x00 "CAN6_CAN_WMBn_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB50++0x03
line.long 0x00 "CAN6_CAN_WMB1_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB54++0x03
line.long 0x00 "CAN6_CAN_WMB1_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB58++0x03
line.long 0x00 "CAN6_CAN_WMB1_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB5C++0x03
line.long 0x00 "CAN6_CAN_WMB1_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB60++0x03
line.long 0x00 "CAN6_CAN_WMB2_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB64++0x03
line.long 0x00 "CAN6_CAN_WMB2_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB68++0x03
line.long 0x00 "CAN6_CAN_WMB2_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB6C++0x03
line.long 0x00 "CAN6_CAN_WMB2_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB70++0x03
line.long 0x00 "CAN6_CAN_WMB3_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB74++0x03
line.long 0x00 "CAN6_CAN_WMB3_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB78++0x03
line.long 0x00 "CAN6_CAN_WMB3_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB7C++0x03
line.long 0x00 "CAN6_CAN_WMB3_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xC00++0x03
line.long 0x00 "CAN6_CAN_FDCTRL,CAN FD control register(CAN_FDCTRL)"
bitfld.long 0x00 31. "FD_RATE,Bit Rate Switch Enable" "0,1"
bitfld.long 0x00 27.--30. "RSVD_30_27,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "MBDSR3,Message Buffer Data Size for Region 3" "0,1,2,3"
bitfld.long 0x00 24. "RSVD_24,reserve" "0,1"
bitfld.long 0x00 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0,1,2,3"
newline
bitfld.long 0x00 21. "RSVD_21,reserve" "0,1"
bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0,1,2,3"
bitfld.long 0x00 18. "RSVD_18,reserve" "0,1"
bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0,1,2,3"
bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0,1"
newline
bitfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xC04++0x03
line.long 0x00 "CAN6_CAN_FDCBT,CAN FD bit timing control register(CAN_FDCBT)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor"
bitfld.long 0x00 19. "RSVD_19,reserve" "0,1"
bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
newline
bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7"
group.long 0xC08++0x03
line.long 0x00 "CAN6_CAN_FDCRC,CAN FD CRC register(CAN_FDCRC)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value"
tree.end
tree "CAN7"
base ad:0x40057000
group.long 0x00++0x03
line.long 0x00 "CAN7_CAN_MCR,CAN module configure register(CAN_MCR)"
bitfld.long 0x00 31. "MDIS,Module Disable" "0,1"
bitfld.long 0x00 30. "FRZ,Freeze Enable" "0,1"
bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0,1"
bitfld.long 0x00 28. "HALT,Halt CAN" "0,1"
bitfld.long 0x00 27. "NOTRDY,CAN Not Ready" "0,1"
newline
bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0,1"
bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0,1"
bitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0,1"
bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0,1"
bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0,1"
newline
bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0,1"
bitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0,1"
bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0,1"
bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0,1"
bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0,1"
newline
bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0,1"
bitfld.long 0x00 15. "DMAE,DMA Enable" "0,1"
bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0,1"
bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0,1"
bitfld.long 0x00 12. "AEN,Abort Enable" "0,1"
newline
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0,1"
bitfld.long 0x00 10. "RSVD_10,reserve" "0,1"
bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0,1,2,3"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Reserved"
group.long 0x04++0x03
line.long 0x00 "CAN7_CAN_CTRL1,CONTROL 1 register(CAN_CTRL1)"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor"
bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "0,1"
newline
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "LPB,Loop Back Mode" "0,1"
bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0,1"
bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0,1"
bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0,1"
bitfld.long 0x00 5. "TSYC,Timer Sync" "0,1"
bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0,1"
newline
bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0,1"
bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "CAN7_CAN_TIMER,Free Running Timer register(CAN_TIMER)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "TIMER,free running counter value"
group.long 0x10++0x03
line.long 0x00 "CAN7_CAN_RXMGMSK,Rx mailbox global mask register(CAN_RXMGMSK)"
hexmask.long 0x00 0.--31. 1. "MG,Rx mailbox global mask"
group.long 0x14++0x03
line.long 0x00 "CAN7_CAN_RX14MASK,Rx 14 mask register(CAN_RX14MASK)"
hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits"
group.long 0x18++0x03
line.long 0x00 "CAN7_CAN_RX15MASK,Rx 15 mask register(CAN_RX15MASK)"
hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits"
group.long 0x1C++0x03
line.long 0x00 "CAN7_CAN_ECR,Error counter register(CAN_ECR)"
hexmask.long.byte 0x00 24.--31. 1. "RX_ERRCNT_FAST,Receive Error Counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TX_ERRCNT_FAST,Transmit Error Counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter"
hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter"
group.long 0x20++0x03
line.long 0x00 "CAN7_CAN_ESR1,CAN error status register(CAN_ESR1)"
bitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 error in CAN_FD data phase" "0,1"
bitfld.long 0x00 29. "RSVD_29,reserve" "0,1"
bitfld.long 0x00 28. "CRCERR_FAST,CRC error in CAN_FD CRC phase" "0,1"
bitfld.long 0x00 27. "FRAMERR_FAST,Frame error of CAN_FD data phase" "0,1"
newline
bitfld.long 0x00 26. "STFERR_FAST,Stuff erro of CAN_FD data phase" "0,1"
bitfld.long 0x00 22.--25. "RSVD_25_22,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "ERROVR,error of overrun" "0,1"
bitfld.long 0x00 20. "ERRINT_FAST,error interrupt of errors detect in CAN_FD data phase" "0,1"
bitfld.long 0x00 19. "BUSOFFDONEINT,Bus off done interrupt" "0,1"
newline
bitfld.long 0x00 18. "SYNCH,Synchronous" "0,1"
bitfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt" "0,1"
bitfld.long 0x00 16. "RWRNINT,Rx warning Interrupt" "0,1"
bitfld.long 0x00 15. "BIT1ERR,Bit error of CAN non-fd" "0,1"
bitfld.long 0x00 14. "BIT0ERR,Bit0 error of CAN non-fd" "0,1"
newline
bitfld.long 0x00 13. "ACKERR,Acknowledge error of non-fd" "0,1"
bitfld.long 0x00 12. "CRCERR,CRC error of non-fd" "0,1"
bitfld.long 0x00 11. "FRAMERR,frame error of non-fd" "0,1"
bitfld.long 0x00 10. "STFERR,stuff erro of non-fd" "0,1"
bitfld.long 0x00 9. "TXWRN,tx warning" "0,1"
newline
bitfld.long 0x00 8. "RXWRN,Rx warning" "0,1"
bitfld.long 0x00 7. "IDLE,IDLE" "0,1"
bitfld.long 0x00 6. "TX,Flexcan in transmission" "0,1"
bitfld.long 0x00 4.--5. "FLTCONF,Fault confinement state" "0,1,2,3"
bitfld.long 0x00 3. "RX,Flexcan in Reception" "0,1"
newline
bitfld.long 0x00 2. "BOFFINT,bus off interrupt" "0,1"
bitfld.long 0x00 1. "ERRINT,error interrupt" "0,1"
bitfld.long 0x00 0. "WAKINT,wakeup interrupt" "0,1"
group.long 0x24++0x03
line.long 0x00 "CAN7_CAN_IMASK2,Interrupt mask 2 register(CAN_IMASK2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MB i Mask"
group.long 0x28++0x03
line.long 0x00 "CAN7_CAN_IMASK1,Interrupt mask 1 register(CAN_IMASK1)"
hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MB31 -0 Mask"
group.long 0x2C++0x03
line.long 0x00 "CAN7_CAN_IFLAG2,Interrupt flag 2 register(CAN_IFLAG2)"
hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MB63-32 Mask"
group.long 0x30++0x03
line.long 0x00 "CAN7_CAN_IFLAG1,Interrupt flag 1 register(CAN_IFLAG1)"
hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer8-31 interrupt"
bitfld.long 0x00 7. "BUF7I,Buffer7 interrupt" "0,1"
bitfld.long 0x00 6. "BUF6I,Buffer6 interrupt" "0,1"
bitfld.long 0x00 5. "BUF5I,Buffer5 interrupt" "0,1"
bitfld.long 0x00 1.--4. "BUF4TO1I,Buffer 1-4 interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "BUF0I,Buffer0 interrupt" "0,1"
group.long 0x34++0x03
line.long 0x00 "CAN7_CAN_CTRL2,Control 2 register(CAN_CTRL2)"
bitfld.long 0x00 31. "ERRMASK_FAST,error mask of can-fd" "0,1"
bitfld.long 0x00 30. "BOFFDONEMSK,bus off done mask" "0,1"
bitfld.long 0x00 29. "ECRWRE,error correction register write enable" "0,1"
bitfld.long 0x00 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0,1"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0,1"
bitfld.long 0x00 17. "RRS,Remote Request Storing" "0,1"
bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0,1"
bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0,1"
newline
bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0,1"
bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0,1"
hexmask.long.word 0x00 0.--10. 1. "RSVD_10_0,reserve"
group.long 0x38++0x03
line.long 0x00 "CAN7_CAN_ESR2,Error and Status 2 register(CAN_ESR2)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
bitfld.long 0x00 14. "VPS,Valid Priority Status" "0,1"
bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0,1"
newline
hexmask.long.word 0x00 0.--12. 1. "RSVD_12_0,reserve"
group.long 0x44++0x03
line.long 0x00 "CAN7_CAN_CRCR,CRC register(CAN_CRCR)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC Value"
group.long 0x48++0x03
line.long 0x00 "CAN7_CAN_RXFGMASK,Leagacy FIFO global mask register(CAN_RXFGMASK)"
hexmask.long 0x00 0.--31. 1. "FGM,Rx FIFO Global Mask Bits"
group.long 0x4C++0x03
line.long 0x00 "CAN7_CAN_RXFIR,RX FIFO ID indicator(CAN_RXFIR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,reserve"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,ID Hit incicator"
group.long 0x50++0x03
line.long 0x00 "CAN7_CAN_CBT,CAN bit timing register(CAN_CBT)"
bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0,1"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor"
bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x68++0x03
line.long 0x00 "CAN7_CAN_IMASK4,Interrupt mask 4 register(CAN_IMASK4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96M,Buffer MB 127-96 Mask"
group.long 0x6C++0x03
line.long 0x00 "CAN7_CAN_IMASK3,Interrupt mask 3 register(CAN_IMASK3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64M,Buffer MB 95-64 Mask"
group.long 0x70++0x03
line.long 0x00 "CAN7_CAN_IFLAG4,Interrupt flag 4 register(CAN_IFLAG4)"
hexmask.long 0x00 0.--31. 1. "BUF127TO96I,Buffer MB 127-96 Interrupt"
group.long 0x74++0x03
line.long 0x00 "CAN7_CAN_IFLAG3,Interrupt flag 3 register(CAN_IFLAG3)"
hexmask.long 0x00 0.--31. 1. "BUF95TO64I,Buffer MB 95-64 Interrupt"
group.long 0x80++0x03
line.long 0x00 "CAN7_CAN_MB0_CS,reserve"
bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1"
bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1"
bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1"
bitfld.long 0x00 28. "RSVD_28,reserve" "0,1"
bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RSVD_23,reserve" "0,1"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time Stamp"
group.long 0x84++0x03
line.long 0x00 "CAN7_CAN_MB0_ID,Message buffer ID register(CAN_MB0_ID)"
bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 18.--28. 1. "ID_STD_EXD,Frame Identifier"
hexmask.long.tbyte 0x00 0.--17. 1. "ID_EXTEND,Frame Identifier"
group.long 0x88++0x03
line.long 0x00 "CAN7_CAN_MB0_DATA03,Message buffer date03 register(CAN_MB0_DATA03)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE03,data byte0-3"
group.long 0x8C++0x03
line.long 0x00 "CAN7_CAN_MB0_DATA47,Message buffer date47 register(CAN_MB0_DAT47)"
hexmask.long 0x00 0.--31. 1. "DATA_BYTE47,data byte0-3"
group.long 0x880++0x03
line.long 0x00 "CAN7_CAN_RXIMRn,RX individual mask register(CAN_RXIMRn)"
hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits"
group.long 0xAE0++0x03
line.long 0x00 "CAN7_CAN_MECR,Memory error control register(CAN_MECR)"
bitfld.long 0x00 31. "ECRWRDIS,Error Configuration Register Write Disable" "0,1"
hexmask.long.word 0x00 20.--30. 1. "RSVD_30_20,reserve"
bitfld.long 0x00 19. "HANCEI_MSK,Host Access with Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 18. "FANCEI_MSK,CAN Access With Non-Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0,1"
bitfld.long 0x00 15. "HAERRI,Host Access Error Injection Enable" "0,1"
bitfld.long 0x00 14. "FAERRIE,CAN Access Error Injection Enable" "0,1"
bitfld.long 0x00 13. "EXTERRIE,Extended Error Injection" "0,1"
bitfld.long 0x00 10.--12. "RSVD_12_10,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "RERRDIS,Error Report Disable" "0,1"
bitfld.long 0x00 8. "ECCDIS,Error Correction Disable" "0,1"
bitfld.long 0x00 7. "NCEFAFRZ,Non-Correctable Errors In CAN Access Put Device In Freeze Mode" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "RSVD_6_0,reserve"
group.long 0xAE4++0x03
line.long 0x00 "CAN7_CAN_ERRIAR,Error injection address regsiter(CAN_ERRIAR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,Reserved"
hexmask.long.word 0x00 2.--13. 1. "INJADDR_H,Error Injection Address High"
bitfld.long 0x00 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3"
group.long 0xAE8++0x03
line.long 0x00 "CAN7_CAN_ERRIDPR,Error injection data pattern register(CAN_ERRIDPR)"
hexmask.long 0x00 0.--31. 1. "DFLIP,Data Flip Pattern"
group.long 0xAEC++0x03
line.long 0x00 "CAN7_CAN_ERRIPPR,Error injection parity pattern register(CAN_ERRIPPR)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "PFLIP2,Parity Flip Pattern For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,reserve" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "PFLIP1,Parity Flip Pattern For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,reserve" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "PFLIP0,Parity Flip Pattern For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAF0++0x03
line.long 0x00 "CAN7_CAN_RERRAR,Error report address register(CAN_RERRAR)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,reserve"
bitfld.long 0x00 24. "NCE,Non-Correctable Error: Indicates that the report is due to a non-correctable error" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "SAID,SAID[2]: Identification of the requestor of the memory read request SAID[1]: Details of FlexCAN operation SAID[0]: Operation that requested the memory" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--15. "RSVD_15_14,reserve" "0,1,2,3"
newline
hexmask.long.word 0x00 0.--13. 1. "ERRADDR,Address Where the Error was Detected"
group.long 0xAF4++0x03
line.long 0x00 "CAN7_CAN_RERRDR,Error report data register(CAN_RERRDR)"
hexmask.long 0x00 0.--31. 1. "RDATA,Raw data word read from memory with error"
group.long 0xAF8++0x03
line.long 0x00 "CAN7_CAN_RERRSYNR,Error report Syndrome reigster(CAN_RERRSYNR)"
bitfld.long 0x00 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,reserve" "0,1,2,3"
bitfld.long 0x00 24.--28. "SYND3,Error Syndrome For Byte 3 (most significant)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "BE2,Error Syndrome For Byte 3 (most significant)" "0,1"
bitfld.long 0x00 21.--22. "RSVD_22_21,reserve" "0,1,2,3"
newline
bitfld.long 0x00 16.--20. "SYND2,Error Syndrome For Byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "BE1,Byte Enabled For Byte 1" "0,1"
bitfld.long 0x00 13.--14. "RSVD_14_13,reserve" "0,1,2,3"
bitfld.long 0x00 8.--12. "SYND1,Error Syndrome For Byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0,1"
newline
bitfld.long 0x00 5.--6. "RSVD_6_5,reserve" "0,1,2,3"
bitfld.long 0x00 0.--4. "SYND0,Error Syndrome For Byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xAFC++0x03
line.long 0x00 "CAN7_CAN_ERRSR,Error status register(CAN_ERRSR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 19. "HANCEIF,Host Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 18. "FANCEIF,CAN Access with Non-Correctable Error Interrupt Flag" "0,1"
bitfld.long 0x00 17. "RSVD_17,reserve" "0,1"
bitfld.long 0x00 16. "CEIF,Correctable Error Interrupt Flag" "0,1"
newline
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 3. "HANCEIOF,Host Access with Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 2. "FANCEIOF,CAN Access With Non-Correctable Error Interrupt Overrun Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,reserve" "0,1"
bitfld.long 0x00 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0,1"
group.long 0xB00++0x03
line.long 0x00 "CAN7_CAN_CTRL1_PN,Pretend network control 1 register(CAN_CTRL1_PN)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0,1"
bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0,1,2,3"
bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0,1,2,3"
group.long 0xB04++0x03
line.long 0x00 "CAN7_CAN_CTRL2_PN,Pretend network control 2 register(CAN_CTRL2_PN)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria"
group.long 0xB08++0x03
line.long 0x00 "CAN7_CAN_WU_MTC,Pretend network wakeup match register(CAN_WU_MTC)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,reserve"
bitfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0,1"
bitfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0,1"
hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xB0C++0x03
line.long 0x00 "CAN7_CAN_FLT_ID1,Pretend network ID filter 1 register(CAN_FLT_ID1)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "FLT_IDE,Number of Matches when in Pretended Networking" "0,1"
bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking Filtering"
group.long 0xB10++0x03
line.long 0x00 "CAN7_CAN_FLT_DLC,Pretend network DLC filter register(CAN_FLT_DLC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,reserve"
bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "RSVD_15_4,reserve"
bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB14++0x03
line.long 0x00 "CAN7_CAN_PL1_LO,Pretend network payload low filter 1 register(CAN_PL1_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB18++0x03
line.long 0x00 "CAN7_CAN_PL1_HI,Pretend network payload high filter 1 register(CAN_PL1_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB1C++0x03
line.long 0x00 "CAN7_CAN_FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register(CAN_FLT_ID2_IDMASK)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0,1"
bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0,1"
hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering/ ID Mask Bits for Pretended Networking ID Filtering"
group.long 0xB20++0x03
line.long 0x00 "CAN7_CAN_PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register(CAN_PL2_PLMASK_LO)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB24++0x03
line.long 0x00 "CAN7_CAN_PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask Register (PL2_PLMASK_HI)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB40++0x03
line.long 0x00 "CAN7_CAN_WMBn_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB44++0x03
line.long 0x00 "CAN7_CAN_WMBn_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB48++0x03
line.long 0x00 "CAN7_CAN_WMBn_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB4C++0x03
line.long 0x00 "CAN7_CAN_WMBn_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB50++0x03
line.long 0x00 "CAN7_CAN_WMB1_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB54++0x03
line.long 0x00 "CAN7_CAN_WMB1_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB58++0x03
line.long 0x00 "CAN7_CAN_WMB1_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB5C++0x03
line.long 0x00 "CAN7_CAN_WMB1_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB60++0x03
line.long 0x00 "CAN7_CAN_WMB2_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB64++0x03
line.long 0x00 "CAN7_CAN_WMB2_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB68++0x03
line.long 0x00 "CAN7_CAN_WMB2_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB6C++0x03
line.long 0x00 "CAN7_CAN_WMB2_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xB70++0x03
line.long 0x00 "CAN7_CAN_WMB3_CS,Wake Up Message Buffer Register for C/S(CAN_WMBn_CS)"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,reserve"
bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1"
bitfld.long 0x00 21. "IDE,ID Extended Bit" "0,1"
bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0,1"
bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,reserve"
group.long 0xB74++0x03
line.long 0x00 "CAN7_CAN_WMB3_ID,Wake Up Message Buffer Register for ID(CAN_WMBn_ID)"
bitfld.long 0x00 29.--31. "RSVD_31_29,reserve" "0,1,2,3,4,5,6,7"
hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode"
group.long 0xB78++0x03
line.long 0x00 "CAN7_CAN_WMB3_D03,Wake Up Message Buffer Register for Data 0-3(CAN_WMBn_D03)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Reserved"
group.long 0xB7C++0x03
line.long 0x00 "CAN7_CAN_WMB3_D47,Wake Up Message Buffer Register for Data 4-7(CAN_WMBn_D47)"
hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Reserved"
group.long 0xC00++0x03
line.long 0x00 "CAN7_CAN_FDCTRL,CAN FD control register(CAN_FDCTRL)"
bitfld.long 0x00 31. "FD_RATE,Bit Rate Switch Enable" "0,1"
bitfld.long 0x00 27.--30. "RSVD_30_27,reserve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "MBDSR3,Message Buffer Data Size for Region 3" "0,1,2,3"
bitfld.long 0x00 24. "RSVD_24,reserve" "0,1"
bitfld.long 0x00 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0,1,2,3"
newline
bitfld.long 0x00 21. "RSVD_21,reserve" "0,1"
bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0,1,2,3"
bitfld.long 0x00 18. "RSVD_18,reserve" "0,1"
bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0,1,2,3"
bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0,1"
newline
bitfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0,1"
bitfld.long 0x00 13. "RSVD_13,reserve" "0,1"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--7. "RSVD_7_6,reserve" "0,1,2,3"
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xC04++0x03
line.long 0x00 "CAN7_CAN_FDCBT,CAN FD bit timing control register(CAN_FDCBT)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor"
bitfld.long 0x00 19. "RSVD_19,reserve" "0,1"
bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 15. "RSVD_15,reserve" "0,1"
newline
bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--9. "RSVD_9_8,reserve" "0,1,2,3"
bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7"
group.long 0xC08++0x03
line.long 0x00 "CAN7_CAN_FDCRC,CAN FD CRC register(CAN_FDCRC)"
bitfld.long 0x00 31. "RSVD_31,reserve" "0,1"
hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC"
bitfld.long 0x00 21.--23. "RSVD_23_21,reserve" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value"
tree.end
tree.end
tree "CMP"
base ad:0x40073000
rgroup.long 0x00++0x03
line.long 0x00 "CMP_VERID,Version ID register(CMP_VERID)"
hexmask.long 0x00 0.--31. 1. "VERID,CMP version number"
rgroup.long 0x04++0x03
line.long 0x00 "CMP_PARAM,Parameter register"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "DAC_RES,DAC resolution" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x08++0x03
line.long 0x00 "CMP_CCR0,Comparator control register0(CMP_CCR0)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "STOP_EN,stop enable bit" "0,1"
bitfld.long 0x00 2. "SOC_TRG_EN,SOC trigger enable" "0,1"
bitfld.long 0x00 1. "CMP_EN,comparator enable" "0,1"
bitfld.long 0x00 0. "CMP_SEL,Low speed/high speed comparator select" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CMP_CCR1,Comparator control register1(CMP_CCR1)"
hexmask.long.byte 0x00 24.--31. 1. "FILT_PER,Filter sample period"
bitfld.long 0x00 19.--23. "RSVD_23_19,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "FILT_CNT,Filer sample count" "0,1,2,3,4,5,6,7"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "COUT_OW,COUT level when window is closed" "0,1"
bitfld.long 0x00 6. "COUT_OWE,COUT level when window is closed enbale bit" "0,1"
bitfld.long 0x00 5. "COUT_PEN,Cout output to pad" "0,1"
bitfld.long 0x00 4. "COUT_SEL,Cout select" "0,1"
bitfld.long 0x00 3. "COUT_INV,Comparator invert" "0,1"
newline
bitfld.long 0x00 2. "DMA_EN,DMA enbale" "0,1"
bitfld.long 0x00 1. "SAMPLE_EN,sample mode enable" "0,1"
bitfld.long 0x00 0. "WINDOW_EN,Window mode enable" "0,1"
group.long 0x10++0x03
line.long 0x00 "CMP_CCR2,Comparator control register2(CMP_CCR2)"
bitfld.long 0x00 28.--31. "LS_MSEL,low speed CMP NMUX select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "LS_PSEL,low speed CMP PMUX select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 20.--23. "HS_MSEL,High speed CMP NMUX select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "HS_PSEL,High speed CMP PMUX select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 6.--15. 1. "RSVD_15_6,Reserved"
bitfld.long 0x00 4.--5. "LS_HSTCTR,low-speed cmp hyst select" "0,1,2,3"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--1. "HS_HSTCTR,High-speed cmp hyst select" "0,1,2,3"
group.long 0x14++0x03
line.long 0x00 "CMP_DCR,DAC control register(CMP_DCR)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "DAC_SEL,DAC output Voltage select"
hexmask.long.byte 0x00 9.--15. 1. "RSVD_15_9,Reserved"
bitfld.long 0x00 8. "VREF_SEL,DAC reference select" "0,1"
bitfld.long 0x00 2.--7. "RSVD_7_2,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 1. "DAC_BUFF_EN,Reserved" "0,1"
bitfld.long 0x00 0. "DAC_EN,DAC enable" "0,1"
group.long 0x18++0x03
line.long 0x00 "CMP_IER,Interrupt enable register(CMP_IER)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 1. "CFF_IE,Comparator flag falling interrupt enable" "0,1"
bitfld.long 0x00 0. "CFR_IE,Comparator flag raising interrupt enable" "0,1"
group.long 0x1C++0x03
line.long 0x00 "CMP_CSR,Comparator status register(CMP_CSR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "COUT,Analog comparator output" "0,1"
bitfld.long 0x00 2.--7. "RSVD_7_2,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 1. "CFF,Comparator output falling edge" "0,1"
bitfld.long 0x00 0. "CFR,Comparator output raising edge" "0,1"
tree.end
tree "CMU"
tree "CMU0"
base ad:0x4003E000
rgroup.long 0x00++0x03
line.long 0x00 "CMU0_CMU_VERID,Clock Monitor Unit Version Idenfication(CMU_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "MAJOR,Major version"
hexmask.long.byte 0x00 8.--15. 1. "MINOR,Minor version"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
rgroup.long 0x04++0x03
line.long 0x00 "CMU0_CMU_PARAM,Clock Monitor Unit Parameter(CMU_PARAM)"
hexmask.long 0x00 1.--30. 1. "RSVD_30_1,Reserved"
bitfld.long 0x00 0. "RST_IMP,Reset generation implemented" "0,1"
group.long 0x08++0x03
line.long 0x00 "CMU0_CMU_CTRL,Clock Monitor Unit Control(CMU_CTRL)"
bitfld.long 0x00 31. "LOCK,Write register lock" "0,1"
hexmask.long.word 0x00 18.--30. 1. "RSVD_30_18,Reserved"
bitfld.long 0x00 17. "FBLTIE,Frequency Below Low Threshold Interrupt Enable" "0,1"
bitfld.long 0x00 16. "FAHTIE,Frequency Above High Threshold Interrupt Enable" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 9. "FBLTRSTE,Frequency Below Low Threshold Reset Enable" "0,1"
bitfld.long 0x00 8. "FAHTRSTE,Frequency Above High Threshold Reset Enable" "0,1"
bitfld.long 0x00 5.--7. "RSVD_7_5,Reserved" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4. "CMMD,Clock Monitor Mode" "0,1"
bitfld.long 0x00 1.--3. "RSVD_3_1,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "CME,Clock Monitor Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CMU0_CMU_STAT,Clock Monitor Unit Status(CMU_STAT)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 17. "FBLTIF,Frequency Below Low Threshold Interrupt Flag" "0,1"
bitfld.long 0x00 16. "FAHTIF,Frequency Above High Threshold Interrupt Flag" "0,1"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 4. "STARTMEA,Start to measure" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--1. "MONST,Monitor State" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "CMU0_CMU_MONWIN,Clock Monitor Unit Monitor Window(CMU_MONWIN)"
hexmask.long 0x00 0.--31. 1. "MONWIN,Monitor Window"
group.long 0x14++0x03
line.long 0x00 "CMU0_CMU_CUMHCT4INT,Clock Monitor Unit Clock Under Monitor High Compare Threshold For Interrupt(CMU_CUMHCT4INT)"
hexmask.long 0x00 0.--31. 1. "HCT4INT,High Compare Threshold For Interrupt"
group.long 0x18++0x03
line.long 0x00 "CMU0_CMU_CUMLCT4INT,Clock Monitor Unit Clock Under Monitor Low Compare Threshold For Interrupt(CMU_CUMLCT4INT)"
hexmask.long 0x00 0.--31. 1. "LCT4INT,Low Compare Threshold For Interrupt"
group.long 0x1C++0x03
line.long 0x00 "CMU0_CMU_CUMHCT4RST,Clock Monitor Unit Clock Under Monitor High Compare Threshold For Reset(CMU_CUMHCT4RST)"
hexmask.long 0x00 0.--31. 1. "HCT4RST,High Compare Threshold For Reset"
group.long 0x20++0x03
line.long 0x00 "CMU0_CMU_CUMLCT4RST,Clock Monitor Unit Clock Under Monitor Low Compare Threshold For Reset(CMU_CUMLCT4RST)"
hexmask.long 0x00 0.--31. 1. "LCT4RST,Low Compare Threshold For Reset"
group.long 0x24++0x03
line.long 0x00 "CMU0_CMU_CUMMEARSLT,Clock Monitor Unit Clock Under Monitor Measurement Result"
hexmask.long 0x00 0.--31. 1. "MEARSLT,Measurement result"
tree.end
tree "CMU1"
base ad:0x40042000
rgroup.long 0x00++0x03
line.long 0x00 "CMU1_CMU_VERID,Clock Monitor Unit Version Idenfication(CMU_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "MAJOR,Major version"
hexmask.long.byte 0x00 8.--15. 1. "MINOR,Minor version"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
rgroup.long 0x04++0x03
line.long 0x00 "CMU1_CMU_PARAM,Clock Monitor Unit Parameter(CMU_PARAM)"
hexmask.long 0x00 1.--30. 1. "RSVD_30_1,Reserved"
bitfld.long 0x00 0. "RST_IMP,Reset generation implemented" "0,1"
group.long 0x08++0x03
line.long 0x00 "CMU1_CMU_CTRL,Clock Monitor Unit Control(CMU_CTRL)"
bitfld.long 0x00 31. "LOCK,Write register lock" "0,1"
hexmask.long.word 0x00 18.--30. 1. "RSVD_30_18,Reserved"
bitfld.long 0x00 17. "FBLTIE,Frequency Below Low Threshold Interrupt Enable" "0,1"
bitfld.long 0x00 16. "FAHTIE,Frequency Above High Threshold Interrupt Enable" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 9. "FBLTRSTE,Frequency Below Low Threshold Reset Enable" "0,1"
bitfld.long 0x00 8. "FAHTRSTE,Frequency Above High Threshold Reset Enable" "0,1"
bitfld.long 0x00 5.--7. "RSVD_7_5,Reserved" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4. "CMMD,Clock Monitor Mode" "0,1"
bitfld.long 0x00 1.--3. "RSVD_3_1,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "CME,Clock Monitor Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CMU1_CMU_STAT,Clock Monitor Unit Status(CMU_STAT)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 17. "FBLTIF,Frequency Below Low Threshold Interrupt Flag" "0,1"
bitfld.long 0x00 16. "FAHTIF,Frequency Above High Threshold Interrupt Flag" "0,1"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 4. "STARTMEA,Start to measure" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--1. "MONST,Monitor State" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "CMU1_CMU_MONWIN,Clock Monitor Unit Monitor Window(CMU_MONWIN)"
hexmask.long 0x00 0.--31. 1. "MONWIN,Monitor Window"
group.long 0x14++0x03
line.long 0x00 "CMU1_CMU_CUMHCT4INT,Clock Monitor Unit Clock Under Monitor High Compare Threshold For Interrupt(CMU_CUMHCT4INT)"
hexmask.long 0x00 0.--31. 1. "HCT4INT,High Compare Threshold For Interrupt"
group.long 0x18++0x03
line.long 0x00 "CMU1_CMU_CUMLCT4INT,Clock Monitor Unit Clock Under Monitor Low Compare Threshold For Interrupt(CMU_CUMLCT4INT)"
hexmask.long 0x00 0.--31. 1. "LCT4INT,Low Compare Threshold For Interrupt"
group.long 0x1C++0x03
line.long 0x00 "CMU1_CMU_CUMHCT4RST,Clock Monitor Unit Clock Under Monitor High Compare Threshold For Reset(CMU_CUMHCT4RST)"
hexmask.long 0x00 0.--31. 1. "HCT4RST,High Compare Threshold For Reset"
group.long 0x20++0x03
line.long 0x00 "CMU1_CMU_CUMLCT4RST,Clock Monitor Unit Clock Under Monitor Low Compare Threshold For Reset(CMU_CUMLCT4RST)"
hexmask.long 0x00 0.--31. 1. "LCT4RST,Low Compare Threshold For Reset"
group.long 0x24++0x03
line.long 0x00 "CMU1_CMU_CUMMEARSLT,Clock Monitor Unit Clock Under Monitor Measurement Result"
hexmask.long 0x00 0.--31. 1. "MEARSLT,Measurement result"
tree.end
tree "CMU2"
base ad:0x40043000
rgroup.long 0x00++0x03
line.long 0x00 "CMU2_CMU_VERID,Clock Monitor Unit Version Idenfication(CMU_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "MAJOR,Major version"
hexmask.long.byte 0x00 8.--15. 1. "MINOR,Minor version"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
rgroup.long 0x04++0x03
line.long 0x00 "CMU2_CMU_PARAM,Clock Monitor Unit Parameter(CMU_PARAM)"
hexmask.long 0x00 1.--30. 1. "RSVD_30_1,Reserved"
bitfld.long 0x00 0. "RST_IMP,Reset generation implemented" "0,1"
group.long 0x08++0x03
line.long 0x00 "CMU2_CMU_CTRL,Clock Monitor Unit Control(CMU_CTRL)"
bitfld.long 0x00 31. "LOCK,Write register lock" "0,1"
hexmask.long.word 0x00 18.--30. 1. "RSVD_30_18,Reserved"
bitfld.long 0x00 17. "FBLTIE,Frequency Below Low Threshold Interrupt Enable" "0,1"
bitfld.long 0x00 16. "FAHTIE,Frequency Above High Threshold Interrupt Enable" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 9. "FBLTRSTE,Frequency Below Low Threshold Reset Enable" "0,1"
bitfld.long 0x00 8. "FAHTRSTE,Frequency Above High Threshold Reset Enable" "0,1"
bitfld.long 0x00 5.--7. "RSVD_7_5,Reserved" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4. "CMMD,Clock Monitor Mode" "0,1"
bitfld.long 0x00 1.--3. "RSVD_3_1,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "CME,Clock Monitor Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CMU2_CMU_STAT,Clock Monitor Unit Status(CMU_STAT)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 17. "FBLTIF,Frequency Below Low Threshold Interrupt Flag" "0,1"
bitfld.long 0x00 16. "FAHTIF,Frequency Above High Threshold Interrupt Flag" "0,1"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 4. "STARTMEA,Start to measure" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--1. "MONST,Monitor State" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "CMU2_CMU_MONWIN,Clock Monitor Unit Monitor Window(CMU_MONWIN)"
hexmask.long 0x00 0.--31. 1. "MONWIN,Monitor Window"
group.long 0x14++0x03
line.long 0x00 "CMU2_CMU_CUMHCT4INT,Clock Monitor Unit Clock Under Monitor High Compare Threshold For Interrupt(CMU_CUMHCT4INT)"
hexmask.long 0x00 0.--31. 1. "HCT4INT,High Compare Threshold For Interrupt"
group.long 0x18++0x03
line.long 0x00 "CMU2_CMU_CUMLCT4INT,Clock Monitor Unit Clock Under Monitor Low Compare Threshold For Interrupt(CMU_CUMLCT4INT)"
hexmask.long 0x00 0.--31. 1. "LCT4INT,Low Compare Threshold For Interrupt"
group.long 0x1C++0x03
line.long 0x00 "CMU2_CMU_CUMHCT4RST,Clock Monitor Unit Clock Under Monitor High Compare Threshold For Reset(CMU_CUMHCT4RST)"
hexmask.long 0x00 0.--31. 1. "HCT4RST,High Compare Threshold For Reset"
group.long 0x20++0x03
line.long 0x00 "CMU2_CMU_CUMLCT4RST,Clock Monitor Unit Clock Under Monitor Low Compare Threshold For Reset(CMU_CUMLCT4RST)"
hexmask.long 0x00 0.--31. 1. "LCT4RST,Low Compare Threshold For Reset"
group.long 0x24++0x03
line.long 0x00 "CMU2_CMU_CUMMEARSLT,Clock Monitor Unit Clock Under Monitor Measurement Result"
hexmask.long 0x00 0.--31. 1. "MEARSLT,Measurement result"
tree.end
tree.end
tree "CRC"
base ad:0x40032000
rgroup.long 0x00++0x03
line.long 0x00 "CRC_VERID,CRC Version Number(CRC_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number"
hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number"
hexmask.long.word 0x00 0.--15. 1. "FEATURE,Module Identification Number"
rgroup.long 0x04++0x03
line.long 0x00 "CRC_PARAM,CRC Parameter Register(CRC_PARAM)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x08++0x03
line.long 0x00 "CRC_DATA,CRC Data register(CRC_DATA)"
hexmask.long.byte 0x00 24.--31. 1. "BYTE3,CRC Data Byte3"
hexmask.long.byte 0x00 16.--23. 1. "BYTE2,CRC Data Byte2"
hexmask.long.byte 0x00 8.--15. 1. "BYTE1,CRC Data Byte1"
hexmask.long.byte 0x00 0.--7. 1. "BYTE0,CRC Data Byte0"
group.long 0x0C++0x03
line.long 0x00 "CRC_POLY,CRC Polynomial register(CRC_POLY)"
hexmask.long.word 0x00 16.--31. 1. "HPHW,High Polynominal Half-word"
hexmask.long.word 0x00 0.--15. 1. "LPHW,Low Polynominal Half-word"
group.long 0x10++0x03
line.long 0x00 "CRC_CTRL,CRC Control register(CRC_CTRL)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,This field is reserved"
bitfld.long 0x00 6.--7. "WT,Write Type Of Transpose" "0,1,2,3"
bitfld.long 0x00 4.--5. "RT,Read Type Of Transpose" "0,1,2,3"
bitfld.long 0x00 3. "RSVD_3,This field is reserved" "0,1"
bitfld.long 0x00 2. "CR,Complement" "0,1"
bitfld.long 0x00 1. "WS,Write seed" "0,1"
bitfld.long 0x00 0. "MODE,CRC mode" "0,1"
tree.end
tree "DMA"
base ad:0x40008000
group.long 0x00++0x03
line.long 0x00 "DMA_CONF,DMA configure register(DMA_CONF)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "BUSY,DMA busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 3. "DBGE,Debug enable" "0,1"
bitfld.long 0x00 2. "RRCAE,Round robin channel arbitration enable" "0,1"
bitfld.long 0x00 1. "HOEE,Halt on error enable" "0,1"
bitfld.long 0x00 0. "HALT,DMA operation halt" "0,1"
group.long 0x04++0x03
line.long 0x00 "DMA_DMAE,DMA request enable register(DMA_DMAE)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DMAE15,Channel 15 DMA request enable" "0,1"
bitfld.long 0x00 14. "DMAE14,Channel 14 DMA request enable" "0,1"
bitfld.long 0x00 13. "DMAE13,Channel 13 DMA request enable" "0,1"
bitfld.long 0x00 12. "DMAE12,Channel 12 DMA request enable" "0,1"
bitfld.long 0x00 11. "DMAE11,Channel 11 DMA request enable" "0,1"
bitfld.long 0x00 10. "DMAE10,Channel 10 DMA request enable" "0,1"
bitfld.long 0x00 9. "DMAE9,Channel 9 DMA request enable" "0,1"
newline
bitfld.long 0x00 8. "DMAE8,Channel 8 DMA request enable" "0,1"
bitfld.long 0x00 7. "DMAE7,Channel 7 DMA request enable" "0,1"
bitfld.long 0x00 6. "DMAE6,Channel 6 DMA request enable" "0,1"
bitfld.long 0x00 5. "DMAE5,Channel 5 DMA request enable" "0,1"
bitfld.long 0x00 4. "DMAE4,Channel 4 DMA request enable" "0,1"
bitfld.long 0x00 3. "DMAE3,Channel 3 DMA request enable" "0,1"
bitfld.long 0x00 2. "DMAE2,Channel 2 DMA request enable" "0,1"
bitfld.long 0x00 1. "DMAE1,Channel 1 DMA request enable" "0,1"
newline
bitfld.long 0x00 0. "DMAE0,Channel 0 DMA request enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "DMA_EIE,DMA errror interrupt enable register(DMA_EIE)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "EIE15,Channel 15 error interrupt enable" "0,1"
bitfld.long 0x00 14. "EIE14,Channel 14 error interrupt enable" "0,1"
bitfld.long 0x00 13. "EIE13,Channel 13 error interrupt enable" "0,1"
bitfld.long 0x00 12. "EIE12,Channel 12 error interrupt enable" "0,1"
bitfld.long 0x00 11. "EIE11,Channel 11 error interrupt enable" "0,1"
bitfld.long 0x00 10. "EIE10,Channel 10 error interrupt enable" "0,1"
bitfld.long 0x00 9. "EIE9,Channel 9 error interrupt enable" "0,1"
newline
bitfld.long 0x00 8. "EIE8,Channel 8 error interrupt enable" "0,1"
bitfld.long 0x00 7. "EIE7,Channel 7 error interrupt enable" "0,1"
bitfld.long 0x00 6. "EIE6,Channel 6 error interrupt enable" "0,1"
bitfld.long 0x00 5. "EIE5,Channel 5 error interrupt enable" "0,1"
bitfld.long 0x00 4. "EIE4,Channel 4 error interrupt enable" "0,1"
bitfld.long 0x00 3. "EIE3,Channel 3 error interrupt enable" "0,1"
bitfld.long 0x00 2. "EIE2,Channel 2 error interrupt enable" "0,1"
bitfld.long 0x00 1. "EIE1,Channel 1 error interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "EIE0,Channel 0 error interrupt enable" "0,1"
wgroup.long 0x14++0x03
line.long 0x00 "DMA_GCC,DMA global channel control register(DMA_GCC)"
bitfld.long 0x00 31. "WPEN3,Write protection for this register byte 3 bits" "0,1"
bitfld.long 0x00 30. "CACIS,Clear all channels interrupt status in CIS register" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--27. "CCIS,Clear channel interrupt status in CIS register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 23. "WPEN2,Write protection for this register byte 2 bits" "0,1"
bitfld.long 0x00 22. "CACES,Clear all channels error status in CES register" "0,1"
bitfld.long 0x00 20.--21. "RSVD_21_20,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--19. "CCES,Clear channel error status in CES register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "WPEN1,Write protection for this register byte 1 bits" "0,1"
bitfld.long 0x00 14. "SACSTART,Set all channels START bit of DMA_CSx[START]" "0,1"
bitfld.long 0x00 12.--13. "RSVD_13_12,Reserved" "0,1,2,3"
bitfld.long 0x00 8.--11. "SCSTART,Set channel START bit of DMA_CSx[START]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "WPEN0,Write protection for this register byte 0 bits" "0,1"
bitfld.long 0x00 6. "CACDONE,Clear all channels DONE bit of DMA_CSx[DONE]" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "CCDONE,Clear channel DONE bit of DMA_CSx[DONE]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x18++0x03
line.long 0x00 "DMA_ES,DMA error status register (DMA_ES)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "ERRF,Error flag" "0,1"
bitfld.long 0x00 14. "RSVD_14,Reserved" "0,1"
bitfld.long 0x00 13. "PRIEF,Priority error flag" "0,1"
bitfld.long 0x00 12. "RSVD_12,Reserved" "0,1"
bitfld.long 0x00 8.--11. "CHEF,Channel error flag" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "SAEF,Source address error flag" "0,1"
bitfld.long 0x00 6. "SOEF,Source address offset error flag" "0,1"
newline
bitfld.long 0x00 5. "DAEF,destination address error flag" "0,1"
bitfld.long 0x00 4. "DOEF,destination address offset error flag" "0,1"
bitfld.long 0x00 3. "NUMEF,Number of transfer data error flag" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "SBEF,Source bus error flag" "0,1"
bitfld.long 0x00 0. "DBEF,Destination bus error flag" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "DMA_CES,DMA channel error status register(DMA_CES)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "ERR15,Channel 15 error flag" "0,1"
bitfld.long 0x00 14. "ERR14,Channel 14 error flag" "0,1"
bitfld.long 0x00 13. "ERR13,Channel 13 error flag" "0,1"
bitfld.long 0x00 12. "ERR12,Channel 12 error flag" "0,1"
bitfld.long 0x00 11. "ERR11,Channel 11 error flag" "0,1"
bitfld.long 0x00 10. "ERR10,Channel 10 error flag" "0,1"
bitfld.long 0x00 9. "ERR9,Channel 9 error flag" "0,1"
newline
bitfld.long 0x00 8. "ERR8,Channel 8 error flag" "0,1"
bitfld.long 0x00 7. "ERR7,Channel 7 error flag" "0,1"
bitfld.long 0x00 6. "ERR6,Channel 6 error flag" "0,1"
bitfld.long 0x00 5. "ERR5,Channel 5 error flag" "0,1"
bitfld.long 0x00 4. "ERR4,Channel 4 error flag" "0,1"
bitfld.long 0x00 3. "ERR3,Channel 3 error flag" "0,1"
bitfld.long 0x00 2. "ERR2,Channel 2 error flag" "0,1"
bitfld.long 0x00 1. "ERR1,Channel 1 error flag" "0,1"
newline
bitfld.long 0x00 0. "ERR0,Channel 0 error flag" "0,1"
rgroup.long 0x20++0x03
line.long 0x00 "DMA_CIS,DMA channel interrupt status register(DMA_CIS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "INT15,Channel 15 interrupt flag" "0,1"
bitfld.long 0x00 14. "INT14,Channel 14 interrupt flag" "0,1"
bitfld.long 0x00 13. "INT13,Channel 13 interrupt flag" "0,1"
bitfld.long 0x00 12. "INT12,Channel 12 interrupt flag" "0,1"
bitfld.long 0x00 11. "INT11,Channel 11 interrupt flag" "0,1"
bitfld.long 0x00 10. "INT10,Channel 10 interrupt flag" "0,1"
bitfld.long 0x00 9. "INT9,Channel 9 interrupt flag" "0,1"
newline
bitfld.long 0x00 8. "INT8,Channel 8 interrupt flag" "0,1"
bitfld.long 0x00 7. "INT7,Channel 7 interrupt flag" "0,1"
bitfld.long 0x00 6. "INT6,Channel 6 interrupt flag" "0,1"
bitfld.long 0x00 5. "INT5,Channel 5 interrupt flag" "0,1"
bitfld.long 0x00 4. "INT4,Channel 4 interrupt flag" "0,1"
bitfld.long 0x00 3. "INT3,Channel 3 interrupt flag" "0,1"
bitfld.long 0x00 2. "INT2,Channel 2 interrupt flag" "0,1"
bitfld.long 0x00 1. "INT1,Channel 1 interrupt flag" "0,1"
newline
bitfld.long 0x00 0. "INT0,Channel 0 interrupt flag" "0,1"
rgroup.long 0x24++0x03
line.long 0x00 "DMA_CHRS,DMA channel hardware request status register(DMA_CHRS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "HRS15,Channel 15 hardware request flag" "0,1"
bitfld.long 0x00 14. "HRS14,Channel 14 hardware request flag" "0,1"
bitfld.long 0x00 13. "HRS13,Channel 13 hardware request flag" "0,1"
bitfld.long 0x00 12. "HRS12,Channel 12 hardware request flag" "0,1"
bitfld.long 0x00 11. "HRS11,Channel 11 hardware request flag" "0,1"
bitfld.long 0x00 10. "HRS10,Channel 10 hardware request flag" "0,1"
bitfld.long 0x00 9. "HRS9,Channel 9 hardware request flag" "0,1"
newline
bitfld.long 0x00 8. "HRS8,Channel 8 hardware request flag" "0,1"
bitfld.long 0x00 7. "HRS7,Channel 7 hardware request flag" "0,1"
bitfld.long 0x00 6. "HRS6,Channel 6 hardware request flag" "0,1"
bitfld.long 0x00 5. "HRS5,Channel 5 hardware request flag" "0,1"
bitfld.long 0x00 4. "HRS4,Channel 4 hardware request flag" "0,1"
bitfld.long 0x00 3. "HRS3,Channel 3 hardware request flag" "0,1"
bitfld.long 0x00 2. "HRS2,Channel 2 hardware request flag" "0,1"
bitfld.long 0x00 1. "HRS1,Channel 1 hardware request flag" "0,1"
newline
bitfld.long 0x00 0. "HRS0,Channel 0 hardware request flag" "0,1"
group.long 0x28++0x03
line.long 0x00 "DMA_CPRI0,DMA channel priority register 0(DMA_CPRI0)"
bitfld.long 0x00 31. "CSE0,Channel 0 suspend enable" "0,1"
bitfld.long 0x00 30. "CPDIS0,Channel 0 preempt disable" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--27. "CPRI0,Channel 0 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 23. "CSE1,Channel 1 suspend enable" "0,1"
bitfld.long 0x00 22. "CPDIS1,Channel 1 preempt disable" "0,1"
bitfld.long 0x00 20.--21. "RSVD_21_20,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--19. "CPRI1,Channel 1 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "CSE2,Channel 2 suspend enable" "0,1"
bitfld.long 0x00 14. "CPDIS2,Channel 2 preempt disable" "0,1"
bitfld.long 0x00 12.--13. "RSVD_13_12,Reserved" "0,1,2,3"
bitfld.long 0x00 8.--11. "CPRI2,Channel 2 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "CSE3,Channel 3 suspend enable" "0,1"
bitfld.long 0x00 6. "CPDIS3,Channel 3 preempt disable" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "CPRI3,Channel 3 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x2C++0x03
line.long 0x00 "DMA_CPRI1,DMA channel priority register 1(DMA_CPRI1)"
bitfld.long 0x00 31. "CSE4,Channel 4 suspend enable" "0,1"
bitfld.long 0x00 30. "CPDIS4,Channel 4 preempt disable" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--27. "CPRI4,Channel 4 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 23. "CSE5,Channel 5 suspend enable" "0,1"
bitfld.long 0x00 22. "CPDIS5,Channel 5 preempt disable" "0,1"
bitfld.long 0x00 20.--21. "RSVD_21_20,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--19. "CPRI5,Channel 5 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "CSE6,Channel 6 suspend enable" "0,1"
bitfld.long 0x00 14. "CPDIS6,Channel 6 preempt disable" "0,1"
bitfld.long 0x00 12.--13. "RSVD_13_12,Reserved" "0,1,2,3"
bitfld.long 0x00 8.--11. "CPRI6,Channel 6 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "CSE7,Channel 7 suspend enable" "0,1"
bitfld.long 0x00 6. "CPDIS7,Channel 7 preempt disable" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "CPRI7,Channel 7 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x30++0x03
line.long 0x00 "DMA_CPRI2,DMA channel priority register 2(DMA_CPRI2)"
bitfld.long 0x00 31. "CSE8,Channel 8 suspend enable" "0,1"
bitfld.long 0x00 30. "CPDIS8,Channel 8 preempt disable" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--27. "CPRI8,Channel 8 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 23. "CSE9,Channel 9 suspend enable" "0,1"
bitfld.long 0x00 22. "CPDIS9,Channel 9 preempt disable" "0,1"
bitfld.long 0x00 20.--21. "RSVD_21_20,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--19. "CPRI9,Channel 9 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "CSE10,Channel 10 suspend enable" "0,1"
bitfld.long 0x00 14. "CPDIS10,Channel 10 preempt disable" "0,1"
bitfld.long 0x00 12.--13. "RSVD_13_12,Reserved" "0,1,2,3"
bitfld.long 0x00 8.--11. "CPRI10,Channel 10 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "CSE11,Channel 11 suspend enable" "0,1"
bitfld.long 0x00 6. "CPDIS11,Channel 11 preempt disable" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "CPRI11,Channel 11 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x34++0x03
line.long 0x00 "DMA_CPRI3,DMA channel priority register 3(DMA_CPRI3)"
bitfld.long 0x00 31. "CSE12,Channel 12 suspend enable" "0,1"
bitfld.long 0x00 30. "CPDIS12,Channel 12 preempt disable" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--27. "CPRI12,Channel 12 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 23. "CSE13,Channel 13 suspend enable" "0,1"
bitfld.long 0x00 22. "CPDIS13,Channel 13 preempt disable" "0,1"
bitfld.long 0x00 20.--21. "RSVD_21_20,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--19. "CPRI13,Channel 13 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "CSE14,Channel 14 suspend enable" "0,1"
bitfld.long 0x00 14. "CPDIS14,Channel 14 preempt disable" "0,1"
bitfld.long 0x00 12.--13. "RSVD_13_12,Reserved" "0,1,2,3"
bitfld.long 0x00 8.--11. "CPRI14,Channel 14 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "CSE15,Channel 15 suspend enable" "0,1"
bitfld.long 0x00 6. "CPDIS15,Channel 15 preempt disable" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "CPRI15,Channel 15 priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x200++0x03
line.long 0x00 "DMA_SADDRn0,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x204++0x03
line.long 0x00 "DMA_DADDRn0,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x208++0x03
line.long 0x00 "DMA_AOFFn0,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x20C++0x03
line.long 0x00 "DMA_MLAOFFn0,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x210++0x03
line.long 0x00 "DMA_NUMn0,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x214++0x03
line.long 0x00 "DMA_ITERn0,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x218++0x03
line.long 0x00 "DMA_CSn0,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x220++0x03
line.long 0x00 "DMA_SADDRn1,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x224++0x03
line.long 0x00 "DMA_DADDRn1,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x228++0x03
line.long 0x00 "DMA_AOFFn1,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x22C++0x03
line.long 0x00 "DMA_MLAOFFn1,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x230++0x03
line.long 0x00 "DMA_NUMn1,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x234++0x03
line.long 0x00 "DMA_ITERn1,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x238++0x03
line.long 0x00 "DMA_CSn1,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x240++0x03
line.long 0x00 "DMA_SADDRn2,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x244++0x03
line.long 0x00 "DMA_DADDRn2,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x248++0x03
line.long 0x00 "DMA_AOFFn2,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x24C++0x03
line.long 0x00 "DMA_MLAOFFn2,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x250++0x03
line.long 0x00 "DMA_NUMn2,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x254++0x03
line.long 0x00 "DMA_ITERn2,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x258++0x03
line.long 0x00 "DMA_CSn2,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x260++0x03
line.long 0x00 "DMA_SADDRn3,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x264++0x03
line.long 0x00 "DMA_DADDRn3,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x268++0x03
line.long 0x00 "DMA_AOFFn3,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x26C++0x03
line.long 0x00 "DMA_MLAOFFn3,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x270++0x03
line.long 0x00 "DMA_NUMn3,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x274++0x03
line.long 0x00 "DMA_ITERn3,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x278++0x03
line.long 0x00 "DMA_CSn3,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x280++0x03
line.long 0x00 "DMA_SADDRn4,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x284++0x03
line.long 0x00 "DMA_DADDRn4,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x288++0x03
line.long 0x00 "DMA_AOFFn4,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x28C++0x03
line.long 0x00 "DMA_MLAOFFn4,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x290++0x03
line.long 0x00 "DMA_NUMn4,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x294++0x03
line.long 0x00 "DMA_ITERn4,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x298++0x03
line.long 0x00 "DMA_CSn4,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x2A0++0x03
line.long 0x00 "DMA_SADDRn5,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x2A4++0x03
line.long 0x00 "DMA_DADDRn5,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x2A8++0x03
line.long 0x00 "DMA_AOFFn5,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x2AC++0x03
line.long 0x00 "DMA_MLAOFFn5,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x2B0++0x03
line.long 0x00 "DMA_NUMn5,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x2B4++0x03
line.long 0x00 "DMA_ITERn5,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x2B8++0x03
line.long 0x00 "DMA_CSn5,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x2C0++0x03
line.long 0x00 "DMA_SADDRn6,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x2C4++0x03
line.long 0x00 "DMA_DADDRn6,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x2C8++0x03
line.long 0x00 "DMA_AOFFn6,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x2CC++0x03
line.long 0x00 "DMA_MLAOFFn6,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x2D0++0x03
line.long 0x00 "DMA_NUMn6,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x2D4++0x03
line.long 0x00 "DMA_ITERn6,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x2D8++0x03
line.long 0x00 "DMA_CSn6,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x2E0++0x03
line.long 0x00 "DMA_SADDRn7,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x2E4++0x03
line.long 0x00 "DMA_DADDRn7,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x2E8++0x03
line.long 0x00 "DMA_AOFFn7,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x2EC++0x03
line.long 0x00 "DMA_MLAOFFn7,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x2F0++0x03
line.long 0x00 "DMA_NUMn7,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x2F4++0x03
line.long 0x00 "DMA_ITERn7,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x2F8++0x03
line.long 0x00 "DMA_CSn7,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x300++0x03
line.long 0x00 "DMA_SADDRn8,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x304++0x03
line.long 0x00 "DMA_DADDRn8,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x308++0x03
line.long 0x00 "DMA_AOFFn8,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x30C++0x03
line.long 0x00 "DMA_MLAOFFn8,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x310++0x03
line.long 0x00 "DMA_NUMn8,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x314++0x03
line.long 0x00 "DMA_ITERn8,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x318++0x03
line.long 0x00 "DMA_CSn8,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x320++0x03
line.long 0x00 "DMA_SADDRn9,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x324++0x03
line.long 0x00 "DMA_DADDRn9,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x328++0x03
line.long 0x00 "DMA_AOFFn9,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x32C++0x03
line.long 0x00 "DMA_MLAOFFn9,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x330++0x03
line.long 0x00 "DMA_NUMn9,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x334++0x03
line.long 0x00 "DMA_ITERn9,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x338++0x03
line.long 0x00 "DMA_CSn9,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x340++0x03
line.long 0x00 "DMA_SADDRn10,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x344++0x03
line.long 0x00 "DMA_DADDRn10,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x348++0x03
line.long 0x00 "DMA_AOFFn10,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x34C++0x03
line.long 0x00 "DMA_MLAOFFn10,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x350++0x03
line.long 0x00 "DMA_NUMn10,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x354++0x03
line.long 0x00 "DMA_ITERn10,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x358++0x03
line.long 0x00 "DMA_CSn10,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x360++0x03
line.long 0x00 "DMA_SADDRn11,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x364++0x03
line.long 0x00 "DMA_DADDRn11,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x368++0x03
line.long 0x00 "DMA_AOFFn11,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x36C++0x03
line.long 0x00 "DMA_MLAOFFn11,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x370++0x03
line.long 0x00 "DMA_NUMn11,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x374++0x03
line.long 0x00 "DMA_ITERn11,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x378++0x03
line.long 0x00 "DMA_CSn11,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x380++0x03
line.long 0x00 "DMA_SADDRn12,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x384++0x03
line.long 0x00 "DMA_DADDRn12,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x388++0x03
line.long 0x00 "DMA_AOFFn12,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x38C++0x03
line.long 0x00 "DMA_MLAOFFn12,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x390++0x03
line.long 0x00 "DMA_NUMn12,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x394++0x03
line.long 0x00 "DMA_ITERn12,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x398++0x03
line.long 0x00 "DMA_CSn12,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x3A0++0x03
line.long 0x00 "DMA_SADDRn13,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x3A4++0x03
line.long 0x00 "DMA_DADDRn13,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x3A8++0x03
line.long 0x00 "DMA_AOFFn13,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x3AC++0x03
line.long 0x00 "DMA_MLAOFFn13,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x3B0++0x03
line.long 0x00 "DMA_NUMn13,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x3B4++0x03
line.long 0x00 "DMA_ITERn13,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x3B8++0x03
line.long 0x00 "DMA_CSn13,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x3C0++0x03
line.long 0x00 "DMA_SADDRn14,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x3C4++0x03
line.long 0x00 "DMA_DADDRn14,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x3C8++0x03
line.long 0x00 "DMA_AOFFn14,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x3CC++0x03
line.long 0x00 "DMA_MLAOFFn14,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x3D0++0x03
line.long 0x00 "DMA_NUMn14,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x3D4++0x03
line.long 0x00 "DMA_ITERn14,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x3D8++0x03
line.long 0x00 "DMA_CSn14,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
group.long 0x3E0++0x03
line.long 0x00 "DMA_SADDRn15,DMA channel n source address register(DMA_SADDRn)"
hexmask.long 0x00 0.--31. 1. "SADDR,Channel n source address"
group.long 0x3E4++0x03
line.long 0x00 "DMA_DADDRn15,DMA channel n destination address register(DMA_DADDRn)"
hexmask.long 0x00 0.--31. 1. "DADDR,Channel n destination address"
group.long 0x3E8++0x03
line.long 0x00 "DMA_AOFFn15,DMA channel n address offset register(DMA_AOFFn)"
hexmask.long.word 0x00 16.--31. 1. "DAOFF,Channel n destination address offset"
hexmask.long.word 0x00 0.--15. 1. "SAOFF,Channel n source address offset"
group.long 0x3EC++0x03
line.long 0x00 "DMA_MLAOFFn15,DMA channel n Major loop address offset register(DMA_MLAOFFn)"
hexmask.long.word 0x00 16.--31. 1. "MLDAOFF,Channel n major loop destination address offset"
hexmask.long.word 0x00 0.--15. 1. "MLSAOFF,Channel n major loop source address offset"
group.long 0x3F0++0x03
line.long 0x00 "DMA_NUMn15,DMA channel n number of transfer data(DMA_NUMn)"
hexmask.long 0x00 0.--31. 1. "NUM,Channel n number of transfer data in a minor loop"
group.long 0x3F4++0x03
line.long 0x00 "DMA_ITERn15,DMA channel n Iteration number register(DMA_ITERn)"
hexmask.long.word 0x00 16.--31. 1. "MLSTA,Channel n minor loop status"
hexmask.long.word 0x00 0.--15. 1. "MLITER,Channel n minor loop iteration number"
group.long 0x3F8++0x03
line.long 0x00 "DMA_CSn15,DMA channel n control and status register(DMA_CSn)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "SSIZE,Channel n source data transfer size" "0,1,2,3"
bitfld.long 0x00 18.--23. "RSVD_23_18,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DSIZE,Channel n destination data transfer size" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "RSVD_15_8,Reserved"
bitfld.long 0x00 7. "DONE,Channel n DMA transfer done flag" "0,1"
bitfld.long 0x00 6. "BUSY,Channel n busy status" "0,1"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 3. "REQDIS,Channel n DMA hardware request disable" "0,1"
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "INTE,Channel n DMA major loop done interrupt enable" "0,1"
bitfld.long 0x00 0. "START,Channel n software start" "0,1"
tree.end
tree "DMUX"
base ad:0x40009000
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x00)++0x03
line.long 0x00 "DMA_MUX_CHn_CFG$1,DMA Channel Mux Configuration Register(DMA_MUX_CHn_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 1.--7. 1. "SRC_MUX,DMA MUX Source"
bitfld.long 0x00 0. "ENABLE,DMA MUX Enable" "0,1"
repeat.end
tree.end
tree "EIRU"
base ad:0x4000B000
rgroup.long 0x00++0x03
line.long 0x00 "EIRU_CR,EIRU control register(EIRU_CR)"
bitfld.long 0x00 31. "LOCK,Global EIRU Lock Bit" "0,1"
hexmask.long.tbyte 0x00 13.--30. 1. "RSVD_30_13,Reserved"
bitfld.long 0x00 12. "SRAM1_EEI_EN,SRAM1 ECC Error Injection Enable" "0,1"
bitfld.long 0x00 11. "SRAM1_EMB_DIS,SRAM1 ECC Multi Bit Disable" "0,1"
bitfld.long 0x00 10. "SRAM1_ESB_DIS,SRAM1 ECC Single Bit Disable" "0,1"
bitfld.long 0x00 9. "SRAM1_EW_DIS,SRAM1 ECC Write Disable" "0,1"
bitfld.long 0x00 8. "SRAM1_ER_DIS,SRAM1 ECC Read Disable" "0,1"
newline
bitfld.long 0x00 5.--7. "RSVD_7_5,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4. "SRAM0_EEI_EN,SRAM0 ECC Error Injection Enable" "0,1"
bitfld.long 0x00 3. "SRAM0_EMB_DIS,SRAM0 ECC Multi Bit Disable" "0,1"
bitfld.long 0x00 2. "SRAM0_ESB_DIS,SRAM0 ECC Single Bit Disable" "0,1"
bitfld.long 0x00 1. "SRAM0_EW_DIS,SRAM0 ECC Write Disable" "0,1"
bitfld.long 0x00 0. "SRAM0_ER_DIS,SRAM0 ECC Read Disable" "0,1"
group.long 0x04++0x03
line.long 0x00 "EIRU_EEIADDR,EIRU ECC Error Injection Address(EIRU_EEIADDR)"
hexmask.long 0x00 2.--31. 1. "EEIADDR,ECC Error Injection Address"
bitfld.long 0x00 0.--1. "RSVD_1_0,Reserved" "0,1,2,3"
rgroup.long 0x10++0x03
line.long 0x00 "EIRU_SRAMn_EESR0,EIRU SRAM n ECC Error Status Register(EIRU_SRAMn_EESR)"
bitfld.long 0x00 31. "OVERRUN,ECC Error Overrun" "0,1"
bitfld.long 0x00 30. "MBERR,ECC Multi-bit Error" "0,1"
bitfld.long 0x00 29. "SBERR,ECC Single-bit Error" "0,1"
hexmask.long.word 0x00 16.--28. 1. "RSVD_28_16,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "EFMST,ECC Fault Master"
bitfld.long 0x00 7. "EFW,ECC Fault" "0,1"
bitfld.long 0x00 4.--6. "EFSIZE,ECC Fault HSIZE" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--3. "EFPROT,ECC Fault HPROT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x14++0x03
line.long 0x00 "EIRU_SRAMn_FADDR0,EIRU SRAM n ECC Fault Address Register(EIRU_SRAMn_FADDR)"
hexmask.long 0x00 0.--31. 1. "EFADDR,ECC Fault Address"
rgroup.long 0x18++0x03
line.long 0x00 "EIRU_SRAMn_FDATA0,EIRU SRAM n ECC Fault Data Register(EIRU_SRAMn_FDATA)"
hexmask.long 0x00 0.--31. 1. "EFDATA,ECC Fault Data"
group.long 0x1C++0x03
line.long 0x00 "EIRU_SRAMn_ECCMASK0,EIRU SRAM n ECC Check Bit MASK(EIRU_SRAMn_ECCMASK)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
hexmask.long.byte 0x00 0.--6. 1. "ECCMASK,ECC Bit Mask"
group.long 0x20++0x03
line.long 0x00 "EIRU_SRAMn_DATAMASK0,EIRU SRAM n DATA Bit MASK(EIRU_CHn_DATAMASK)"
hexmask.long 0x00 0.--31. 1. "DATAMASK,Data bit mask"
rgroup.long 0x30++0x03
line.long 0x00 "EIRU_SRAMn_EESR1,EIRU SRAM n ECC Error Status Register(EIRU_SRAMn_EESR)"
bitfld.long 0x00 31. "OVERRUN,ECC Error Overrun" "0,1"
bitfld.long 0x00 30. "MBERR,ECC Multi-bit Error" "0,1"
bitfld.long 0x00 29. "SBERR,ECC Single-bit Error" "0,1"
hexmask.long.word 0x00 16.--28. 1. "RSVD_28_16,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "EFMST,ECC Fault Master"
bitfld.long 0x00 7. "EFW,ECC Fault" "0,1"
bitfld.long 0x00 4.--6. "EFSIZE,ECC Fault HSIZE" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--3. "EFPROT,ECC Fault HPROT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x34++0x03
line.long 0x00 "EIRU_SRAMn_FADDR1,EIRU SRAM n ECC Fault Address Register(EIRU_SRAMn_FADDR)"
hexmask.long 0x00 0.--31. 1. "EFADDR,ECC Fault Address"
rgroup.long 0x38++0x03
line.long 0x00 "EIRU_SRAMn_FDATA1,EIRU SRAM n ECC Fault Data Register(EIRU_SRAMn_FDATA)"
hexmask.long 0x00 0.--31. 1. "EFDATA,ECC Fault Data"
group.long 0x3C++0x03
line.long 0x00 "EIRU_SRAMn_ECCMASK1,EIRU SRAM n ECC Check Bit MASK(EIRU_SRAMn_ECCMASK)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
hexmask.long.byte 0x00 0.--6. 1. "ECCMASK,ECC Bit Mask"
group.long 0x40++0x03
line.long 0x00 "EIRU_SRAMn_DATAMASK1,EIRU SRAM n DATA Bit MASK(EIRU_CHn_DATAMASK)"
hexmask.long 0x00 0.--31. 1. "DATAMASK,Data bit mask"
tree.end
tree "FLASHC"
base ad:0x40020000
group.long 0x00++0x03
line.long 0x00 "FLASH_FSTAT,Flash Status Register"
bitfld.long 0x00 31. "FSEC,Flash Security bit" "0,1"
bitfld.long 0x00 30. "DBG_ERSALL_DIS,debug erase all request disable" "0,1"
hexmask.long.word 0x00 18.--29. 1. "RSVD_29_18,This field is reserved"
bitfld.long 0x00 17. "SFDIF,Single-bit Fault Detect Interrupt Flag" "0,1"
bitfld.long 0x00 16. "DFDIF,Double-bit Fault Detect Interrupt Flag" "0,1"
bitfld.long 0x00 12.--15. "RSVD_15_12,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 11. "CMDWRF,Command writing flag" "0,1"
bitfld.long 0x00 8.--10. "RSVD_10_8,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 7. "CCIF,Command Complete Interrupt Flag" "0,1"
bitfld.long 0x00 6. "PREABT,Pre-command Abort Flag" "0,1"
bitfld.long 0x00 5. "ACCERR,Command Access Error Flag" "0,1"
bitfld.long 0x00 3.--4. "RSVD_4_3,This field is reserved" "0,1,2,3"
newline
bitfld.long 0x00 2. "CMDABT,Command Abort Flag" "0,1"
bitfld.long 0x00 1. "RSVD_1,This field is reserved" "0,1"
bitfld.long 0x00 0. "FAIL,Command Fail Flag" "0,1"
group.long 0x04++0x03
line.long 0x00 "FLASH_FCNFG,Flash Configuration Register"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,This field is reserved"
bitfld.long 0x00 17. "SFDIE,Single-bit Fault Detect Interrupt Enable" "0,1"
bitfld.long 0x00 16. "DFDIE,Double Bit Fault Detect Interrupt Enable" "0,1"
hexmask.long.byte 0x00 9.--15. 1. "RSVD_15_9,This field is reserved"
bitfld.long 0x00 8. "DBG_ERS_FLG,Debug Erase All Request" "0,1"
bitfld.long 0x00 7. "CCIE,Command Complete Interrupt Enable" "0,1"
newline
bitfld.long 0x00 1.--6. "RSVD_6_1,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0. "BK_QUERY,Backdoor query" "0,1"
group.long 0x08++0x03
line.long 0x00 "FLASH_FCTRL,Flash Control Register"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,This field is reserved"
bitfld.long 0x00 24. "ABTREQ,Abort Request" "0,1"
hexmask.long.byte 0x00 17.--23. 1. "RSVD_23_17,This field is reserved"
bitfld.long 0x00 16. "FECCF,Force ECC Fault" "0,1"
hexmask.long.byte 0x00 9.--15. 1. "RSVD_15_9,This field is reserved"
bitfld.long 0x00 8. "LSMODE,Low speed active mode" "0,1"
newline
bitfld.long 0x00 4.--7. "RSVD_7_4,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "RWSC,Read Wait-State Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x10++0x03
line.long 0x00 "FLASH_FCMD,Flash Command Register"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,This field is reserved"
hexmask.long.byte 0x00 0.--7. 1. "CMDCODE,Flash Command"
group.long 0x14++0x03
line.long 0x00 "FLASH_FCMD_OPT,Flash Command Option Register"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,This field is reserved"
hexmask.long.byte 0x00 0.--7. 1. "CMDOPT,Flash option command"
group.long 0x18++0x03
line.long 0x00 "FLASH_FADDR,Flash Address Register"
hexmask.long 0x00 0.--31. 1. "CMDADDR,flash sector/page/phrase address"
group.long 0x1C++0x03
line.long 0x00 "FLASH_FADDR_END,Flash End Address Register"
hexmask.long 0x00 0.--31. 1. "CMDADDRE,flash end address for page/phrase"
group.long 0x20++0x03
line.long 0x00 "FLASH_FDATA0,Flash Data0 Register"
hexmask.long 0x00 0.--31. 1. "CMDDATA0,Flash Data0 Register"
group.long 0x24++0x03
line.long 0x00 "FLASH_FDATA1,Flash Data1 Register"
hexmask.long 0x00 0.--31. 1. "CMDDATA1,Flash Data1 Register"
group.long 0x28++0x03
line.long 0x00 "FLASH_FDATA2,Flash Data2 Register"
hexmask.long 0x00 0.--31. 1. "CMDDATA2,Flash Data2 Register"
group.long 0x2C++0x03
line.long 0x00 "FLASH_FDATA3,Flash Data3 Register"
hexmask.long 0x00 0.--31. 1. "CMDDATA3,Flash Data3 Register"
group.long 0x30++0x03
line.long 0x00 "FLASH_BED_ADDR_STRT,Flash Bus Error Ignored Start Address Register"
hexmask.long 0x00 4.--31. 1. "BED_ADDR_STRT,start address for bus error disable"
bitfld.long 0x00 0.--3. "RSVD_3_0,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x34++0x03
line.long 0x00 "FLASH_BED_ADDR_END,Flash Bus Error Ignored End Phrase Address Register"
hexmask.long 0x00 4.--31. 1. "BED_ADDR_END,end address for bus error disable"
bitfld.long 0x00 0.--3. "RSVD_3_0,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x38++0x03
line.long 0x00 "FLASH_ECC_IN_ADDR,Flash ECC Injection Address Register"
hexmask.long 0x00 4.--31. 1. "ECC_IN_ADDR,ECC injection address"
bitfld.long 0x00 0.--3. "RSVD_3_0,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x3C++0x03
line.long 0x00 "FLASH_ECC_IN_CTRL,Flash ECC Injection Control Register"
bitfld.long 0x00 31. "LOCK,ECC register LOCK bit" "0,1"
hexmask.long.tbyte 0x00 10.--30. 1. "RSVD_30_10,This field is reserved"
bitfld.long 0x00 9. "ECC_IN_EN,ECC injection enable" "0,1"
hexmask.long.word 0x00 0.--8. 1. "ECC_9BIT,ECC injection on 9-bit ECC data"
group.long 0x40++0x03
line.long 0x00 "FLASH_MBE_STATE,Flash Multi-bit Error State Register"
hexmask.long 0x00 4.--31. 1. "MBE_ADDR,multi-bit error address"
bitfld.long 0x00 2.--3. "RSVD_3_2,This field is reserved" "0,1,2,3"
bitfld.long 0x00 1. "MBE_OVERRUN,multi-bit error overrun" "0,1"
bitfld.long 0x00 0. "MBE_FLAG,multi-bit error flag" "0,1"
group.long 0x44++0x03
line.long 0x00 "FLASH_SBE_STATE,Flash Single-bit Error State Register"
hexmask.long 0x00 4.--31. 1. "SBE_ADDR,single-bit error address"
bitfld.long 0x00 2.--3. "RSVD_3_2,This field is reserved" "0,1,2,3"
bitfld.long 0x00 1. "SBE_OVERRUN,single-bit error overrun" "0,1"
bitfld.long 0x00 0. "SBE_FLAG,single-bit error flag" "0,1"
tree.end
tree "GPIO (General Purpose I/O Ports And Peripheral I/O Lines)"
base ad:0x400FF000
group.long 0x00++0x03
line.long 0x00 "GPIOA_PDOR,Port Data Output Register(GPIOA_PDOR)"
hexmask.long 0x00 0.--31. 1. "PDO,Port Data Output"
wgroup.long 0x04++0x03
line.long 0x00 "GPIOA_PSOR,Port Set Output Register(GPIOA_PSOR)"
hexmask.long 0x00 0.--31. 1. "PSO,Port Set Output"
wgroup.long 0x08++0x03
line.long 0x00 "GPIOA_PCOR,Port Clear Output Register(GPIOA_PCOR)"
hexmask.long 0x00 0.--31. 1. "PCO,Port Clear Output"
wgroup.long 0x0C++0x03
line.long 0x00 "GPIOA_PTOR,Port Toggle Output Register(GPIOA_PTOR)"
hexmask.long 0x00 0.--31. 1. "PTO,Port Toggle Output"
rgroup.long 0x10++0x03
line.long 0x00 "GPIOA_PDIR,Port Data Input Register(GPIOA_PDIR)"
hexmask.long 0x00 0.--31. 1. "PDI,Port Data Input"
group.long 0x14++0x03
line.long 0x00 "GPIOA_PDDR,Port Data Direction Register(GPIOA_PDDR)"
hexmask.long 0x00 0.--31. 1. "PDD,Port Data Direction"
rgroup.long 0x18++0x03
line.long 0x00 "GPIOA_PIDR,Port Input Disable Register(GPIOA_PIDR)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x40++0x03
line.long 0x00 "GPIOB_PDOR,Port Data Output Register(GPIOB_PDOR)"
hexmask.long 0x00 0.--31. 1. "PDO,Port Data Output"
wgroup.long 0x44++0x03
line.long 0x00 "GPIOB_PSOR,Port Set Output Register(GPIOB_PSOR)"
hexmask.long 0x00 0.--31. 1. "PSO,Port Set Output"
wgroup.long 0x48++0x03
line.long 0x00 "GPIOB_PCOR,Port Clear Output Register(GPIOB_PCOR)"
hexmask.long 0x00 0.--31. 1. "PCO,Port Clear Output"
wgroup.long 0x4C++0x03
line.long 0x00 "GPIOB_PTOR,Port Toggle Output Register(GPIOB_PTOR)"
hexmask.long 0x00 0.--31. 1. "PTO,Port Toggle Output"
rgroup.long 0x50++0x03
line.long 0x00 "GPIOB_PDIR,Port Data Input Register(GPIOB_PDIR)"
hexmask.long 0x00 0.--31. 1. "PDI,Port Data Input"
group.long 0x54++0x03
line.long 0x00 "GPIOB_PDDR,Port Data Direction Register(GPIOB_PDDR)"
hexmask.long 0x00 0.--31. 1. "PDD,Port Data Direction"
rgroup.long 0x58++0x03
line.long 0x00 "GPIOB_PIDR,Port Input Disable Register(GPIOB_PIDR)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x80++0x03
line.long 0x00 "GPIOC_PDOR,Port Data Output Register(GPIOC_PDOR)"
hexmask.long 0x00 0.--31. 1. "PDO,Port Data Output"
wgroup.long 0x84++0x03
line.long 0x00 "GPIOC_PSOR,Port Set Output Register(GPIOC_PSOR)"
hexmask.long 0x00 0.--31. 1. "PSO,Port Set Output"
wgroup.long 0x88++0x03
line.long 0x00 "GPIOC_PCOR,Port Clear Output Register(GPIOC_PCOR)"
hexmask.long 0x00 0.--31. 1. "PCO,Port Clear Output"
wgroup.long 0x8C++0x03
line.long 0x00 "GPIOC_PTOR,Port Toggle Output Register(GPIOC_PTOR)"
hexmask.long 0x00 0.--31. 1. "PTO,Port Toggle Output"
rgroup.long 0x90++0x03
line.long 0x00 "GPIOC_PDIR,Port Data Input Register(GPIOC_PDIR)"
hexmask.long 0x00 0.--31. 1. "PDI,Port Data Input"
group.long 0x94++0x03
line.long 0x00 "GPIOC_PDDR,Port Data Direction Register(GPIOC_PDDR)"
hexmask.long 0x00 0.--31. 1. "PDD,Port Data Direction"
rgroup.long 0x98++0x03
line.long 0x00 "GPIOC_PIDR,Port Input Disable Register(GPIOC_PIDR)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0xC0++0x03
line.long 0x00 "GPIOD_PDOR,Port Data Output Register(GPIOD_PDOR)"
hexmask.long 0x00 0.--31. 1. "PDO,Port Data Output"
wgroup.long 0xC4++0x03
line.long 0x00 "GPIOD_PSOR,Port Set Output Register(GPIOD_PSOR)"
hexmask.long 0x00 0.--31. 1. "PSO,Port Set Output"
wgroup.long 0xC8++0x03
line.long 0x00 "GPIOD_PCOR,Port Clear Output Register(GPIOD_PCOR)"
hexmask.long 0x00 0.--31. 1. "PCO,Port Clear Output"
wgroup.long 0xCC++0x03
line.long 0x00 "GPIOD_PTOR,Port Toggle Output Register(GPIOD_PTOR)"
hexmask.long 0x00 0.--31. 1. "PTO,Port Toggle Output"
rgroup.long 0xD0++0x03
line.long 0x00 "GPIOD_PDIR,Port Data Input Register(GPIOD_PDIR)"
hexmask.long 0x00 0.--31. 1. "PDI,Port Data Input"
group.long 0xD4++0x03
line.long 0x00 "GPIOD_PDDR,Port Data Direction Register(GPIOD_PDDR)"
hexmask.long 0x00 0.--31. 1. "PDD,Port Data Direction"
rgroup.long 0xD8++0x03
line.long 0x00 "GPIOD_PIDR,Port Input Disable Register(GPIOD_PIDR)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x100++0x03
line.long 0x00 "GPIOE_PDOR,Port Data Output Register(GPIOE_PDOR)"
hexmask.long 0x00 0.--31. 1. "PDO,Port Data Output"
wgroup.long 0x104++0x03
line.long 0x00 "GPIOE_PSOR,Port Set Output Register(GPIOE_PSOR)"
hexmask.long 0x00 0.--31. 1. "PSO,Port Set Output"
wgroup.long 0x108++0x03
line.long 0x00 "GPIOE_PCOR,Port Clear Output Register(GPIOE_PCOR)"
hexmask.long 0x00 0.--31. 1. "PCO,Port Clear Output"
wgroup.long 0x10C++0x03
line.long 0x00 "GPIOE_PTOR,Port Toggle Output Register(GPIOE_PTOR)"
hexmask.long 0x00 0.--31. 1. "PTO,Port Toggle Output"
rgroup.long 0x110++0x03
line.long 0x00 "GPIOE_PDIR,Port Data Input Register(GPIOE_PDIR)"
hexmask.long 0x00 0.--31. 1. "PDI,Port Data Input"
group.long 0x114++0x03
line.long 0x00 "GPIOE_PDDR,Port Data Direction Register(GPIOE_PDDR)"
hexmask.long 0x00 0.--31. 1. "PDD,Port Data Direction"
rgroup.long 0x118++0x03
line.long 0x00 "GPIOE_PIDR,Port Input Disable Register(GPIOE_PIDR)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
tree.end
tree "I2C (Inter-Integrated Circuit)"
tree "I2C0"
base ad:0x40066000
group.long 0x00++0x03
line.long 0x00 "I2C0_I2C_VERID,I2C Version ID(I2C_VERID)"
hexmask.long 0x00 0.--31. 1. "VERID,version ID"
group.long 0x04++0x03
line.long 0x00 "I2C0_I2C_PARAMETER,I2C Parameter Register(I2C_PARAMETER)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,reserve"
bitfld.long 0x00 7.--10. "RXFIFO_DEPTH,RX FIFO depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3.--6. "TXFIFO_DEPTH,TX FIFO depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 2. "DMA_SUPPORT,DMA support bit" "0,1"
newline
bitfld.long 0x00 0.--1. "I2C_SUPPORT_SPEED,I2C transfer speed supported" "0,1,2,3"
group.long 0x08++0x03
line.long 0x00 "I2C0_I2C_CONFIG0,I2C Configure0 Register(I2C_CONFIG0)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 7.--9. "H_MCODE,high speed master code" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "MASTER_BLK_TXFIFO,block master TX FIFO transfer" "0,1"
bitfld.long 0x00 5. "MASTER_BUS_RECOVER_EN,enable I2C master bus recover feature" "0,1"
newline
bitfld.long 0x00 4. "MASTER_ABORT,master abort transfer bit" "0,1"
bitfld.long 0x00 3. "SDA_RECOVER_EN,SDA recover feature enable" "0,1"
bitfld.long 0x00 2. "SLAVE_NACK,slave nack bit" "0,1"
bitfld.long 0x00 1. "SLAVE_ACK_GENCALL,slave general call ack" "0,1"
newline
bitfld.long 0x00 0. "MODULE_EN,module enable bit" "0,1"
group.long 0x0C++0x03
line.long 0x00 "I2C0_I2C_CONFIG1,I2C Configure1 Register(I2C_CONFIG1)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,reserve"
bitfld.long 0x00 10. "MASTER_10BIT_ADDR_SEL,master 10bit address mode select" "0,1"
bitfld.long 0x00 9. "SLAVE_10BIT_ADDR_SEL,slave 10bit address mode select" "0,1"
bitfld.long 0x00 8. "HOLD_EN_RXFIFO_FULL,hold I2C bus feature enable when RXFIFO is full" "0,1"
newline
bitfld.long 0x00 6.--7. "SPEED_SEL,I2C speed select" "0,1,2,3"
bitfld.long 0x00 5. "TXFIFO_EMPTY_EN,allow generate TXFIFO empty flag" "0,1"
bitfld.long 0x00 4. "MASTER_STOP_DET_EN,stop detect feature enable during master mode" "0,1"
bitfld.long 0x00 3. "SLAVE_STOP_DET_EN,stop detect feature enable during slave mode" "0,1"
newline
bitfld.long 0x00 2. "MASTER_RESTART_EN,enable restart feature during master mode" "0,1"
bitfld.long 0x00 1. "MASTER_MODE_EN,master mode enable" "0,1"
bitfld.long 0x00 0. "SLAVE_MODE_DIS,slave mode disable" "0,1"
group.long 0x10++0x03
line.long 0x00 "I2C0_I2C_SDA_SETUP_TIMING,I2C SDA Setup Timing Register(I2C_SDA_SETUP_TIMING)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
hexmask.long.byte 0x00 0.--7. 1. "SDA_SETUP_TIMING,SDA setup timing value"
group.long 0x14++0x03
line.long 0x00 "I2C0_I2C_SDA_HOLD_TIMING,I2C SDA Hold Timing Register(I2C_SDA_HOLD_TIMING)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,reserve"
hexmask.long.byte 0x00 16.--23. 1. "SDA_RX_HOLD_TIMING,SDA RX hold timing value"
hexmask.long.word 0x00 0.--15. 1. "SDA_TX_HOLD_TIMING,SDA TX hold timing value"
group.long 0x18++0x03
line.long 0x00 "I2C0_I2C_DMA_CTRL,I2C DMA Control Register(I2C_DMA_CTRL)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,reserve"
bitfld.long 0x00 4.--5. "DMA_RXFIFO_WATERMARK,DMA RXFIFO watermark" "0,1,2,3"
bitfld.long 0x00 2.--3. "DMA_TXFIFO_WATERMARK,DMA TXFIFO watermark" "0,1,2,3"
bitfld.long 0x00 1. "TXFIFO_DMA_EN,TXFIFO DMA enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_DMA_EN,RXFIFO DMA enable" "0,1"
group.long 0x1C++0x03
line.long 0x00 "I2C0_I2C_INT_ENABLE,I2C Interrupt Enable Register(I2C_INT_ENABLE)"
bitfld.long 0x00 31. "TX_EMPTY_IE,TXFIFO interrupt enable" "0,1"
bitfld.long 0x00 30. "RX_FULL_IE,RXFIFO interrupt enable" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,reserve" "0,1,2,3"
bitfld.long 0x00 27. "SCL_STUCK_AT_LOW_IE,SCL stuck at low interrupt enable" "0,1"
newline
bitfld.long 0x00 26. "RESTART_DET_IE,restart detect interrupt enable" "0,1"
bitfld.long 0x00 25. "RX_OVF_IE,RX overun interrupt enable" "0,1"
bitfld.long 0x00 24. "RX_UNDER_IE,RX under interrupt enable" "0,1"
bitfld.long 0x00 23. "RX_DONE_IE,RX done interrupt enable" "0,1"
newline
bitfld.long 0x00 22. "SLAVE_RD_REQ_IE,slave read request interrupt enable" "0,1"
hexmask.long.word 0x00 6.--21. 1. "RSVD_21_6,reserve"
bitfld.long 0x00 5. "I2C_START_DET_IE,I2C start detect interrupt enable" "0,1"
bitfld.long 0x00 4. "I2C_STOP_DET_IE,I2C stop detect interrupt enable" "0,1"
newline
bitfld.long 0x00 3. "I2C_ACTIVITY_DET_IE,I2C activity detect interrupt enable" "0,1"
bitfld.long 0x00 2. "I2C_ERROR_ABORT_IE,I2C Error abort interrupt enable" "0,1"
bitfld.long 0x00 1. "I2C_TX_OVF_IE,I2C TX overun interrupt enable" "0,1"
bitfld.long 0x00 0. "I2C_CALL_IE,I2C general call interrupt enable" "0,1"
group.long 0x20++0x03
line.long 0x00 "I2C0_I2C_COMMAND_DATA,I2C Rx/Tx Data Buffer and Command Register(I2C_COMMAND_DATA)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,reserve"
bitfld.long 0x00 10. "CMD_RESTART,command restart" "0,1"
bitfld.long 0x00 9. "CMD_STOP,command stop" "0,1"
bitfld.long 0x00 8. "CMD_MASTER_DIRECTION,command direction" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DATA,data"
group.long 0x24++0x03
line.long 0x00 "I2C0_I2C_DEST_ADDR,I2C Target Address Register(I2C_DEST_ADDR)"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,reserve"
bitfld.long 0x00 10.--11. "MASTER_CMD_SEL,master command select" "0,1,2,3"
hexmask.long.word 0x00 0.--9. 1. "DEST_ADDR,destination addresss"
group.long 0x28++0x03
line.long 0x00 "I2C0_I2C_SLAVE_ADDR,I2C Slave Address Register(I2C_SLAVE_ADDR)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
hexmask.long.word 0x00 0.--9. 1. "SLV_ADDR,slave address"
group.long 0x2C++0x03
line.long 0x00 "I2C0_I2C_STD_SCL_HCNT,Standard Speed I2C SCL High Count register(I2C_STD_SCL_HCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "STD_SCL_HCNT,standard SCL high counter value"
group.long 0x30++0x03
line.long 0x00 "I2C0_I2C_STD_SCL_LCNT,Standard Speed I2C SCL Low Count Register(I2C_STD_SCL_LCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "STD_SCL_LCNT,standard SCL low counter value"
group.long 0x34++0x03
line.long 0x00 "I2C0_I2C_FST_SCL_HCNT,Fast Mode I2C SCL High Count Register(I2C_FST_SCL_HCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "FST_SCL_HCNT,Fast SCL high counter value"
group.long 0x38++0x03
line.long 0x00 "I2C0_I2C_FST_SCL_LCNT,Fast Mode I2C SCL Low Count Register(I2C_FST_SCL_LCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "FST_SCL_LCNT,Fast SCL low counter value"
group.long 0x3C++0x03
line.long 0x00 "I2C0_I2C_HS_SCL_HCNT,High Speed I2C SCL High Count Register(2C_HS_SCL_HCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "HS_SCL_HCNT,High speed SCL high counter value"
group.long 0x40++0x03
line.long 0x00 "I2C0_I2C_HS_SCL_LCNT,High Speed I2C SCL Low Count Register(I2C_HS_SCL_LCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "HS_SCL_LCNT,High speed SCL low counter value"
group.long 0x44++0x03
line.long 0x00 "I2C0_I2C_RXFIFO_WATER_MARK,I2C Receive FIFO Water Mark Register(I2C_RXFIFO_WATER_MARK)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,reserve"
bitfld.long 0x00 0.--1. "RXFIFO_WATER_MARK,RX FIFO water mark" "0,1,2,3"
group.long 0x48++0x03
line.long 0x00 "I2C0_I2C_TXFIFO_WATER_MARK,I2C Transmit FIFO Water Mark Register(I2C_TXFIFO_WATER_MARK)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,reserve"
bitfld.long 0x00 0.--1. "TXFIFO_WATER_MARK,TX FIFO water mark" "0,1,2,3"
group.long 0x4C++0x03
line.long 0x00 "I2C0_I2C_TX_FIFO_CNT,I2C Transmit FIFO Valid Entry Counter Register(I2C_TX_FIFO_CNT)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,reserve"
bitfld.long 0x00 0.--2. "TX_FIFO_CNT,TX FIFO valid entries" "0,1,2,3,4,5,6,7"
group.long 0x50++0x03
line.long 0x00 "I2C0_I2C_RX_FIFO_CNT,I2C Receive FIFO Valid Entry Counter Register(I2C_RX_FIFO_CNT)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,reserve"
bitfld.long 0x00 0.--2. "RX_FIFO_CNT,RX FIFO valid entries" "0,1,2,3,4,5,6,7"
group.long 0x54++0x03
line.long 0x00 "I2C0_I2C_FSTD_SPKCNT,I2C Fast and Standard Spike Suppression Limit Register(I2C_FSTD_SPKCNT)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
hexmask.long.byte 0x00 0.--7. 1. "FSTD_SPKLEN,fast and standard spike counter length"
group.long 0x58++0x03
line.long 0x00 "I2C0_I2C_HS_SPKCNT,I2C High Speed Spike Suppression Limit Register(I2C_HS_SPKCNT)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
hexmask.long.byte 0x00 0.--7. 1. "HS_SPKLEN,High speed spike counter"
group.long 0x5C++0x03
line.long 0x00 "I2C0_I2C_STATUS0,I2C Interrupt Status Register(I2C_STATUS0)"
bitfld.long 0x00 31. "TXFIFO_EMPTY,TXFIFO empty flag" "0,1"
bitfld.long 0x00 30. "RXFIFO_FULL,RXFIFO full flag" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,reserve" "0,1,2,3"
bitfld.long 0x00 27. "SCL_STUCK_AT_LOW,SCL stuck at low flag" "0,1"
newline
bitfld.long 0x00 26. "RESTART_DET,restart detect flag" "0,1"
bitfld.long 0x00 25. "RXFIFO_OVERUN,RXFIFO overun flag" "0,1"
bitfld.long 0x00 24. "RXFIFO_UNDERUN,RXFIFO underun flag" "0,1"
bitfld.long 0x00 23. "RXFIFO_DONE,RX FIFO done flag" "0,1"
newline
bitfld.long 0x00 22. "SLAVE_READ_REQ,RXFIFO slave read request flag" "0,1"
hexmask.long.word 0x00 6.--21. 1. "RSVD_21_6,reserve"
bitfld.long 0x00 5. "START_DETECT,start detect flag" "0,1"
bitfld.long 0x00 4. "STOP_DETECT,stop detect flag" "0,1"
newline
bitfld.long 0x00 3. "ACTIVITY,I2C activity flag" "0,1"
bitfld.long 0x00 2. "ERROR_ABORT,transfer abort flag" "0,1"
bitfld.long 0x00 1. "TXFIFO_OVERUN,TXFIFO overrun flag" "0,1"
bitfld.long 0x00 0. "GENERAL_CALL,general call flag" "0,1"
group.long 0x60++0x03
line.long 0x00 "I2C0_I2C_STATUS1,I2C Status Register(I2C_STATUS1)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,reserve"
bitfld.long 0x00 13. "I2C_IS_ENABLE,I2C is enabled flag" "0,1"
bitfld.long 0x00 12. "SLAVE_RX_DATA_DISCARD,slave receive data discard flag" "0,1"
bitfld.long 0x00 11. "SLAVE_IS_DISABLED_UNDER_ACT,slave disabled under active" "0,1"
newline
bitfld.long 0x00 10. "SDA_ERR_RECOVER_STUCK_LOW,SDA error recover from stucking at low flag" "0,1"
bitfld.long 0x00 9. "RXFIO_IS_FULL,RXFIFO full flag" "0,1"
bitfld.long 0x00 8. "RXFIFO_IS_NOT_EMPTY,RXFIFO is not empty flag" "0,1"
bitfld.long 0x00 7. "TXFIFO_IS_EMPTY,TXFIFO is empty flag" "0,1"
newline
bitfld.long 0x00 6. "TXFIO_IS_NOT_FULL,TXFIFO is not full flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_FULL_SLAVE_HOLD,slave RXFIFO hold bus when RXFIFO full" "0,1"
bitfld.long 0x00 4. "RXFIFO_FULL_MASTER_HOLD,master RXFIFO hold bus when RXFIFO full" "0,1"
bitfld.long 0x00 3. "TXFIFO_EMPTY_SLAVE_HOLD,slave hold bus when TXFIFO empty" "0,1"
newline
bitfld.long 0x00 2. "TXFIFO_EMPTY_MASTER_HOLD,master hold bus when TXFIFO empty" "0,1"
bitfld.long 0x00 1. "SLAVE_IS_ACTIVE,slave is active flag" "0,1"
bitfld.long 0x00 0. "MASTER_IS_ACTIVE,master is active flag" "0,1"
group.long 0x64++0x03
line.long 0x00 "I2C0_I2C_ERROR_STATUS,I2C Error Status Register(I2C_ERROR_STATUS)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,reserve"
bitfld.long 0x00 18.--20. "ERR_TXFIFO_FLUSH_CNT,error counter of TXFIFO flush" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 17. "ERR_SDA_LOW_TIMEOUT,error flag of SDA stuck low timeout" "0,1"
bitfld.long 0x00 16. "ERR_SLAVE_FLUSH_TXFIFO,error flag of slave flush TXFIFO" "0,1"
newline
bitfld.long 0x00 15. "ERR_SLAVE_READ_REQ,error flag of slave read request" "0,1"
bitfld.long 0x00 14. "ERR_MASTER_LOST,error flag of master lost" "0,1"
bitfld.long 0x00 13. "ERR_SLAVE_ARBLOST,error flag of slave lost" "0,1"
bitfld.long 0x00 12. "ERR_MASTER_DIS,error flag of master disable" "0,1"
newline
bitfld.long 0x00 11. "ERR_MASTER_ABRT,error flag of master abort" "0,1"
bitfld.long 0x00 10. "ERR_DATA_NO_ACK,error flag of master data no_ack" "0,1"
bitfld.long 0x00 9. "ERR_10BIT_READ_NO_RSTRT,error flag of 10bit read under restart_en=0" "0,1"
bitfld.long 0x00 8. "ERR_10BIT_ADDR2_NO_ACK,error flag of 10bit second address no ack" "0,1"
newline
bitfld.long 0x00 7. "ERR_10BIT_ADDR1_NO_ACK,error flag of 10bit first address no ack" "0,1"
bitfld.long 0x00 6. "ERR_7BIT_ADDR_NO_ACK,error flag of 7bit address no ack" "0,1"
bitfld.long 0x00 5. "ERR_H_MCODE_ACK_DET,error flag of high speed master code ack" "0,1"
bitfld.long 0x00 4. "ERR_H_NO_RSTRT,error flag of high speed under restart_en=0" "0,1"
newline
bitfld.long 0x00 3. "ERR_SBYTE_NORSTRT,error flag of sending start byte under restart_en=0" "0,1"
bitfld.long 0x00 2. "ERR_START_BYTE_ACK_DET,error flag of ack from start byte" "0,1"
bitfld.long 0x00 1. "ERR_GEN_CALL_READ,error flag of reading from general call" "0,1"
bitfld.long 0x00 0. "ERR_GEN_CALL_NO_ACK,error flag of no ack from general call" "0,1"
group.long 0x68++0x03
line.long 0x00 "I2C0_I2C_SCL_LOW_TIMEOUT,I2C SCL Stuck at Low Timeout Register(I2C_SCL_LOW_TIMEOUT)"
hexmask.long 0x00 0.--31. 1. "SCL_LOW_TIMEOUT,SCL stuck at low timeout"
group.long 0x6C++0x03
line.long 0x00 "I2C0_I2C_SDA_LOW_TIMEOUT,I2C SDA Stuck at Low Timeout Register(I2C_SDA_LOW_TIMEOUT)"
hexmask.long 0x00 0.--31. 1. "SDA_LOW_TIMEOUT,SDA stuck at low timeout"
group.long 0x70++0x03
line.long 0x00 "I2C0_I2C_RD_CLR_ERR_STATUS,I2C Read Clear Error Status Register(I2C_RD_CLR_ERR_STATUS)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,reserve"
bitfld.long 0x00 0. "CLR_ERR,read clear I2C_ERROR_STATUS flags" "0,1"
tree.end
tree "I2C1"
base ad:0x40058000
group.long 0x00++0x03
line.long 0x00 "I2C1_I2C_VERID,I2C Version ID(I2C_VERID)"
hexmask.long 0x00 0.--31. 1. "VERID,version ID"
group.long 0x04++0x03
line.long 0x00 "I2C1_I2C_PARAMETER,I2C Parameter Register(I2C_PARAMETER)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,reserve"
bitfld.long 0x00 7.--10. "RXFIFO_DEPTH,RX FIFO depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3.--6. "TXFIFO_DEPTH,TX FIFO depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 2. "DMA_SUPPORT,DMA support bit" "0,1"
newline
bitfld.long 0x00 0.--1. "I2C_SUPPORT_SPEED,I2C transfer speed supported" "0,1,2,3"
group.long 0x08++0x03
line.long 0x00 "I2C1_I2C_CONFIG0,I2C Configure0 Register(I2C_CONFIG0)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 7.--9. "H_MCODE,high speed master code" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "MASTER_BLK_TXFIFO,block master TX FIFO transfer" "0,1"
bitfld.long 0x00 5. "MASTER_BUS_RECOVER_EN,enable I2C master bus recover feature" "0,1"
newline
bitfld.long 0x00 4. "MASTER_ABORT,master abort transfer bit" "0,1"
bitfld.long 0x00 3. "SDA_RECOVER_EN,SDA recover feature enable" "0,1"
bitfld.long 0x00 2. "SLAVE_NACK,slave nack bit" "0,1"
bitfld.long 0x00 1. "SLAVE_ACK_GENCALL,slave general call ack" "0,1"
newline
bitfld.long 0x00 0. "MODULE_EN,module enable bit" "0,1"
group.long 0x0C++0x03
line.long 0x00 "I2C1_I2C_CONFIG1,I2C Configure1 Register(I2C_CONFIG1)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,reserve"
bitfld.long 0x00 10. "MASTER_10BIT_ADDR_SEL,master 10bit address mode select" "0,1"
bitfld.long 0x00 9. "SLAVE_10BIT_ADDR_SEL,slave 10bit address mode select" "0,1"
bitfld.long 0x00 8. "HOLD_EN_RXFIFO_FULL,hold I2C bus feature enable when RXFIFO is full" "0,1"
newline
bitfld.long 0x00 6.--7. "SPEED_SEL,I2C speed select" "0,1,2,3"
bitfld.long 0x00 5. "TXFIFO_EMPTY_EN,allow generate TXFIFO empty flag" "0,1"
bitfld.long 0x00 4. "MASTER_STOP_DET_EN,stop detect feature enable during master mode" "0,1"
bitfld.long 0x00 3. "SLAVE_STOP_DET_EN,stop detect feature enable during slave mode" "0,1"
newline
bitfld.long 0x00 2. "MASTER_RESTART_EN,enable restart feature during master mode" "0,1"
bitfld.long 0x00 1. "MASTER_MODE_EN,master mode enable" "0,1"
bitfld.long 0x00 0. "SLAVE_MODE_DIS,slave mode disable" "0,1"
group.long 0x10++0x03
line.long 0x00 "I2C1_I2C_SDA_SETUP_TIMING,I2C SDA Setup Timing Register(I2C_SDA_SETUP_TIMING)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
hexmask.long.byte 0x00 0.--7. 1. "SDA_SETUP_TIMING,SDA setup timing value"
group.long 0x14++0x03
line.long 0x00 "I2C1_I2C_SDA_HOLD_TIMING,I2C SDA Hold Timing Register(I2C_SDA_HOLD_TIMING)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,reserve"
hexmask.long.byte 0x00 16.--23. 1. "SDA_RX_HOLD_TIMING,SDA RX hold timing value"
hexmask.long.word 0x00 0.--15. 1. "SDA_TX_HOLD_TIMING,SDA TX hold timing value"
group.long 0x18++0x03
line.long 0x00 "I2C1_I2C_DMA_CTRL,I2C DMA Control Register(I2C_DMA_CTRL)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,reserve"
bitfld.long 0x00 4.--5. "DMA_RXFIFO_WATERMARK,DMA RXFIFO watermark" "0,1,2,3"
bitfld.long 0x00 2.--3. "DMA_TXFIFO_WATERMARK,DMA TXFIFO watermark" "0,1,2,3"
bitfld.long 0x00 1. "TXFIFO_DMA_EN,TXFIFO DMA enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_DMA_EN,RXFIFO DMA enable" "0,1"
group.long 0x1C++0x03
line.long 0x00 "I2C1_I2C_INT_ENABLE,I2C Interrupt Enable Register(I2C_INT_ENABLE)"
bitfld.long 0x00 31. "TX_EMPTY_IE,TXFIFO interrupt enable" "0,1"
bitfld.long 0x00 30. "RX_FULL_IE,RXFIFO interrupt enable" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,reserve" "0,1,2,3"
bitfld.long 0x00 27. "SCL_STUCK_AT_LOW_IE,SCL stuck at low interrupt enable" "0,1"
newline
bitfld.long 0x00 26. "RESTART_DET_IE,restart detect interrupt enable" "0,1"
bitfld.long 0x00 25. "RX_OVF_IE,RX overun interrupt enable" "0,1"
bitfld.long 0x00 24. "RX_UNDER_IE,RX under interrupt enable" "0,1"
bitfld.long 0x00 23. "RX_DONE_IE,RX done interrupt enable" "0,1"
newline
bitfld.long 0x00 22. "SLAVE_RD_REQ_IE,slave read request interrupt enable" "0,1"
hexmask.long.word 0x00 6.--21. 1. "RSVD_21_6,reserve"
bitfld.long 0x00 5. "I2C_START_DET_IE,I2C start detect interrupt enable" "0,1"
bitfld.long 0x00 4. "I2C_STOP_DET_IE,I2C stop detect interrupt enable" "0,1"
newline
bitfld.long 0x00 3. "I2C_ACTIVITY_DET_IE,I2C activity detect interrupt enable" "0,1"
bitfld.long 0x00 2. "I2C_ERROR_ABORT_IE,I2C Error abort interrupt enable" "0,1"
bitfld.long 0x00 1. "I2C_TX_OVF_IE,I2C TX overun interrupt enable" "0,1"
bitfld.long 0x00 0. "I2C_CALL_IE,I2C general call interrupt enable" "0,1"
group.long 0x20++0x03
line.long 0x00 "I2C1_I2C_COMMAND_DATA,I2C Rx/Tx Data Buffer and Command Register(I2C_COMMAND_DATA)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,reserve"
bitfld.long 0x00 10. "CMD_RESTART,command restart" "0,1"
bitfld.long 0x00 9. "CMD_STOP,command stop" "0,1"
bitfld.long 0x00 8. "CMD_MASTER_DIRECTION,command direction" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DATA,data"
group.long 0x24++0x03
line.long 0x00 "I2C1_I2C_DEST_ADDR,I2C Target Address Register(I2C_DEST_ADDR)"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,reserve"
bitfld.long 0x00 10.--11. "MASTER_CMD_SEL,master command select" "0,1,2,3"
hexmask.long.word 0x00 0.--9. 1. "DEST_ADDR,destination addresss"
group.long 0x28++0x03
line.long 0x00 "I2C1_I2C_SLAVE_ADDR,I2C Slave Address Register(I2C_SLAVE_ADDR)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
hexmask.long.word 0x00 0.--9. 1. "SLV_ADDR,slave address"
group.long 0x2C++0x03
line.long 0x00 "I2C1_I2C_STD_SCL_HCNT,Standard Speed I2C SCL High Count register(I2C_STD_SCL_HCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "STD_SCL_HCNT,standard SCL high counter value"
group.long 0x30++0x03
line.long 0x00 "I2C1_I2C_STD_SCL_LCNT,Standard Speed I2C SCL Low Count Register(I2C_STD_SCL_LCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "STD_SCL_LCNT,standard SCL low counter value"
group.long 0x34++0x03
line.long 0x00 "I2C1_I2C_FST_SCL_HCNT,Fast Mode I2C SCL High Count Register(I2C_FST_SCL_HCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "FST_SCL_HCNT,Fast SCL high counter value"
group.long 0x38++0x03
line.long 0x00 "I2C1_I2C_FST_SCL_LCNT,Fast Mode I2C SCL Low Count Register(I2C_FST_SCL_LCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "FST_SCL_LCNT,Fast SCL low counter value"
group.long 0x3C++0x03
line.long 0x00 "I2C1_I2C_HS_SCL_HCNT,High Speed I2C SCL High Count Register(2C_HS_SCL_HCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "HS_SCL_HCNT,High speed SCL high counter value"
group.long 0x40++0x03
line.long 0x00 "I2C1_I2C_HS_SCL_LCNT,High Speed I2C SCL Low Count Register(I2C_HS_SCL_LCNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.word 0x00 0.--15. 1. "HS_SCL_LCNT,High speed SCL low counter value"
group.long 0x44++0x03
line.long 0x00 "I2C1_I2C_RXFIFO_WATER_MARK,I2C Receive FIFO Water Mark Register(I2C_RXFIFO_WATER_MARK)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,reserve"
bitfld.long 0x00 0.--1. "RXFIFO_WATER_MARK,RX FIFO water mark" "0,1,2,3"
group.long 0x48++0x03
line.long 0x00 "I2C1_I2C_TXFIFO_WATER_MARK,I2C Transmit FIFO Water Mark Register(I2C_TXFIFO_WATER_MARK)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,reserve"
bitfld.long 0x00 0.--1. "TXFIFO_WATER_MARK,TX FIFO water mark" "0,1,2,3"
group.long 0x4C++0x03
line.long 0x00 "I2C1_I2C_TX_FIFO_CNT,I2C Transmit FIFO Valid Entry Counter Register(I2C_TX_FIFO_CNT)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,reserve"
bitfld.long 0x00 0.--2. "TX_FIFO_CNT,TX FIFO valid entries" "0,1,2,3,4,5,6,7"
group.long 0x50++0x03
line.long 0x00 "I2C1_I2C_RX_FIFO_CNT,I2C Receive FIFO Valid Entry Counter Register(I2C_RX_FIFO_CNT)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,reserve"
bitfld.long 0x00 0.--2. "RX_FIFO_CNT,RX FIFO valid entries" "0,1,2,3,4,5,6,7"
group.long 0x54++0x03
line.long 0x00 "I2C1_I2C_FSTD_SPKCNT,I2C Fast and Standard Spike Suppression Limit Register(I2C_FSTD_SPKCNT)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
hexmask.long.byte 0x00 0.--7. 1. "FSTD_SPKLEN,fast and standard spike counter length"
group.long 0x58++0x03
line.long 0x00 "I2C1_I2C_HS_SPKCNT,I2C High Speed Spike Suppression Limit Register(I2C_HS_SPKCNT)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
hexmask.long.byte 0x00 0.--7. 1. "HS_SPKLEN,High speed spike counter"
group.long 0x5C++0x03
line.long 0x00 "I2C1_I2C_STATUS0,I2C Interrupt Status Register(I2C_STATUS0)"
bitfld.long 0x00 31. "TXFIFO_EMPTY,TXFIFO empty flag" "0,1"
bitfld.long 0x00 30. "RXFIFO_FULL,RXFIFO full flag" "0,1"
bitfld.long 0x00 28.--29. "RSVD_29_28,reserve" "0,1,2,3"
bitfld.long 0x00 27. "SCL_STUCK_AT_LOW,SCL stuck at low flag" "0,1"
newline
bitfld.long 0x00 26. "RESTART_DET,restart detect flag" "0,1"
bitfld.long 0x00 25. "RXFIFO_OVERUN,RXFIFO overun flag" "0,1"
bitfld.long 0x00 24. "RXFIFO_UNDERUN,RXFIFO underun flag" "0,1"
bitfld.long 0x00 23. "RXFIFO_DONE,RX FIFO done flag" "0,1"
newline
bitfld.long 0x00 22. "SLAVE_READ_REQ,RXFIFO slave read request flag" "0,1"
hexmask.long.word 0x00 6.--21. 1. "RSVD_21_6,reserve"
bitfld.long 0x00 5. "START_DETECT,start detect flag" "0,1"
bitfld.long 0x00 4. "STOP_DETECT,stop detect flag" "0,1"
newline
bitfld.long 0x00 3. "ACTIVITY,I2C activity flag" "0,1"
bitfld.long 0x00 2. "ERROR_ABORT,transfer abort flag" "0,1"
bitfld.long 0x00 1. "TXFIFO_OVERUN,TXFIFO overrun flag" "0,1"
bitfld.long 0x00 0. "GENERAL_CALL,general call flag" "0,1"
group.long 0x60++0x03
line.long 0x00 "I2C1_I2C_STATUS1,I2C Status Register(I2C_STATUS1)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,reserve"
bitfld.long 0x00 13. "I2C_IS_ENABLE,I2C is enabled flag" "0,1"
bitfld.long 0x00 12. "SLAVE_RX_DATA_DISCARD,slave receive data discard flag" "0,1"
bitfld.long 0x00 11. "SLAVE_IS_DISABLED_UNDER_ACT,slave disabled under active" "0,1"
newline
bitfld.long 0x00 10. "SDA_ERR_RECOVER_STUCK_LOW,SDA error recover from stucking at low flag" "0,1"
bitfld.long 0x00 9. "RXFIO_IS_FULL,RXFIFO full flag" "0,1"
bitfld.long 0x00 8. "RXFIFO_IS_NOT_EMPTY,RXFIFO is not empty flag" "0,1"
bitfld.long 0x00 7. "TXFIFO_IS_EMPTY,TXFIFO is empty flag" "0,1"
newline
bitfld.long 0x00 6. "TXFIO_IS_NOT_FULL,TXFIFO is not full flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_FULL_SLAVE_HOLD,slave RXFIFO hold bus when RXFIFO full" "0,1"
bitfld.long 0x00 4. "RXFIFO_FULL_MASTER_HOLD,master RXFIFO hold bus when RXFIFO full" "0,1"
bitfld.long 0x00 3. "TXFIFO_EMPTY_SLAVE_HOLD,slave hold bus when TXFIFO empty" "0,1"
newline
bitfld.long 0x00 2. "TXFIFO_EMPTY_MASTER_HOLD,master hold bus when TXFIFO empty" "0,1"
bitfld.long 0x00 1. "SLAVE_IS_ACTIVE,slave is active flag" "0,1"
bitfld.long 0x00 0. "MASTER_IS_ACTIVE,master is active flag" "0,1"
group.long 0x64++0x03
line.long 0x00 "I2C1_I2C_ERROR_STATUS,I2C Error Status Register(I2C_ERROR_STATUS)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,reserve"
bitfld.long 0x00 18.--20. "ERR_TXFIFO_FLUSH_CNT,error counter of TXFIFO flush" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 17. "ERR_SDA_LOW_TIMEOUT,error flag of SDA stuck low timeout" "0,1"
bitfld.long 0x00 16. "ERR_SLAVE_FLUSH_TXFIFO,error flag of slave flush TXFIFO" "0,1"
newline
bitfld.long 0x00 15. "ERR_SLAVE_READ_REQ,error flag of slave read request" "0,1"
bitfld.long 0x00 14. "ERR_MASTER_LOST,error flag of master lost" "0,1"
bitfld.long 0x00 13. "ERR_SLAVE_ARBLOST,error flag of slave lost" "0,1"
bitfld.long 0x00 12. "ERR_MASTER_DIS,error flag of master disable" "0,1"
newline
bitfld.long 0x00 11. "ERR_MASTER_ABRT,error flag of master abort" "0,1"
bitfld.long 0x00 10. "ERR_DATA_NO_ACK,error flag of master data no_ack" "0,1"
bitfld.long 0x00 9. "ERR_10BIT_READ_NO_RSTRT,error flag of 10bit read under restart_en=0" "0,1"
bitfld.long 0x00 8. "ERR_10BIT_ADDR2_NO_ACK,error flag of 10bit second address no ack" "0,1"
newline
bitfld.long 0x00 7. "ERR_10BIT_ADDR1_NO_ACK,error flag of 10bit first address no ack" "0,1"
bitfld.long 0x00 6. "ERR_7BIT_ADDR_NO_ACK,error flag of 7bit address no ack" "0,1"
bitfld.long 0x00 5. "ERR_H_MCODE_ACK_DET,error flag of high speed master code ack" "0,1"
bitfld.long 0x00 4. "ERR_H_NO_RSTRT,error flag of high speed under restart_en=0" "0,1"
newline
bitfld.long 0x00 3. "ERR_SBYTE_NORSTRT,error flag of sending start byte under restart_en=0" "0,1"
bitfld.long 0x00 2. "ERR_START_BYTE_ACK_DET,error flag of ack from start byte" "0,1"
bitfld.long 0x00 1. "ERR_GEN_CALL_READ,error flag of reading from general call" "0,1"
bitfld.long 0x00 0. "ERR_GEN_CALL_NO_ACK,error flag of no ack from general call" "0,1"
group.long 0x68++0x03
line.long 0x00 "I2C1_I2C_SCL_LOW_TIMEOUT,I2C SCL Stuck at Low Timeout Register(I2C_SCL_LOW_TIMEOUT)"
hexmask.long 0x00 0.--31. 1. "SCL_LOW_TIMEOUT,SCL stuck at low timeout"
group.long 0x6C++0x03
line.long 0x00 "I2C1_I2C_SDA_LOW_TIMEOUT,I2C SDA Stuck at Low Timeout Register(I2C_SDA_LOW_TIMEOUT)"
hexmask.long 0x00 0.--31. 1. "SDA_LOW_TIMEOUT,SDA stuck at low timeout"
group.long 0x70++0x03
line.long 0x00 "I2C1_I2C_RD_CLR_ERR_STATUS,I2C Read Clear Error Status Register(I2C_RD_CLR_ERR_STATUS)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,reserve"
bitfld.long 0x00 0. "CLR_ERR,read clear I2C_ERROR_STATUS flags" "0,1"
tree.end
tree.end
tree "I2S (Inter-Integrated Sound Bus Controller)"
tree "I2S0"
base ad:0x40054000
group.long 0x00++0x03
line.long 0x00 "I2S0_I2S_CONTROL,I2S control register(I2S_CONTROL)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,reserve"
bitfld.long 0x00 4. "I2S_RXFIFO_RESET,I2S RXFIFO reset bit" "0,1"
bitfld.long 0x00 3. "I2S_TXFIFO_RESET,I2S TXFIFO reset bit" "0,1"
bitfld.long 0x00 2. "I2S_RE,I2S receiver enable" "0,1"
newline
bitfld.long 0x00 1. "I2S_TE,I2S transmit enable" "0,1"
bitfld.long 0x00 0. "I2S_MODULE_EN,I2S module enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "I2S0_I2S_MASTER_CONFIG,I2S master configure register(I2S_MASTER_CONFIG)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.byte 0x00 8.--15. 1. "MCK_DIV,i2s mclk divider"
bitfld.long 0x00 5.--7. "I2S_NUM_BCLK_GATE,I2S gated after the number of bclk cycles" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
newline
bitfld.long 0x00 1.--2. "I2S_NUM_BCLK,I2S number of bclk cycles" "0,1,2,3"
bitfld.long 0x00 0. "I2S_MASTER_EN,I2S master mode enable bit" "0,1"
group.long 0x08++0x03
line.long 0x00 "I2S0_I2S_CHANNEL0_LEFT_DATA,I2S left data0 register(I2S_LEFT_DATA0)"
hexmask.long 0x00 0.--31. 1. "LEFT_DATA0,channel0 left data"
group.long 0x0C++0x03
line.long 0x00 "I2S0_I2S_CHANNEL0_RIGHT_DATA,I2S right data0 register(I2S_RIGHT_DATA0)"
hexmask.long 0x00 0.--31. 1. "RIGHT_DATA0,channel0 right data"
group.long 0x10++0x03
line.long 0x00 "I2S0_I2S_CHANNEL0_CFG,I2S channel0 configure (I2S_CHANNEL0_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 5.--7. "RX_AUDIO_RESOLUTION,channeln rx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--4. "TX_AUDIO_RESOLUTION,channeln tx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1. "RX_EN,channeln receive enable" "0,1"
newline
bitfld.long 0x00 0. "TX_EN,channeln transmit enable" "0,1"
group.long 0x14++0x03
line.long 0x00 "I2S0_I2S_CHANNEL0_INT_CFG,I2S channel0 interrupt register(I2S_CHANNEL0_INT_REG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 7. "TXFIFO_ORF,TXFIFO overun flag" "0,1"
bitfld.long 0x00 6. "TXFIFO_EMPTYF,TXFIFO empty flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_ORF,RXFIFO overun flag" "0,1"
newline
bitfld.long 0x00 4. "RXFIFO_DAF,RXFIFO data avaliable flag" "0,1"
bitfld.long 0x00 3. "TXFIFO_OVERUN_IE,TXFIFO overun interrupt enable" "0,1"
bitfld.long 0x00 2. "TXFIFO_EMPTY_IE,TXFIFO empty interrupt enable" "0,1"
bitfld.long 0x00 1. "RXFIFO_OVERUN_IE,RXFIFO overun interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_AVAILABLE_IE,RXFIFO data avaliable interrupt enable" "0,1"
group.long 0x18++0x03
line.long 0x00 "I2S0_I2S_CHANNEL0_TRIGGER_LEVEL_CFG,I2S channel0 trigger level configure(I2S_CHANNEL0_TRIGGER_LEVEL_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "CH_RXFIFO_RESET,channel RXFIFO channel reset" "0,1"
bitfld.long 0x00 8. "CH_TXFIFO_RESET,channel TXFIFO channel reset" "0,1"
bitfld.long 0x00 4.--7. "TXFIFO_EMPTY_TRIG_LEV,channel TXFIFO empty trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "RXFIFO_FULL_TRIG_LEV,channel RXFIFO full trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x1C++0x03
line.long 0x00 "I2S0_I2S_CHANNEL1_LEFT_DATA,I2S left data0 register(I2S_LEFT_DATA1)"
hexmask.long 0x00 0.--31. 1. "LEFT_DATA1,channel1 left data"
group.long 0x20++0x03
line.long 0x00 "I2S0_I2S_CHANNEL1_RIGHT_DATA,I2S right data1 register(I2S_RIGHT_DATA1)"
hexmask.long 0x00 0.--31. 1. "RIGHT_DATA1,channel1 right data"
group.long 0x24++0x03
line.long 0x00 "I2S0_I2S_CHANNEL1_CFG,I2S channel1 configure (I2S_CHANNEL1_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 5.--7. "RX_AUDIO_RESOLUTION,channeln rx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--4. "TX_AUDIO_RESOLUTION,channeln tx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1. "RX_EN,channeln receive enable" "0,1"
newline
bitfld.long 0x00 0. "TX_EN,channeln transmit enable" "0,1"
group.long 0x28++0x03
line.long 0x00 "I2S0_I2S_CHANNEL1_INT_CFG,I2S channel1 interrupt register(I2S_CHANNEL1_INT_REG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 7. "TXFIFO_ORF,TXFIFO overun flag" "0,1"
bitfld.long 0x00 6. "TXFIFO_EMPTYF,TXFIFO empty flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_ORF,RXFIFO overun flag" "0,1"
newline
bitfld.long 0x00 4. "RXFIFO_DAF,RXFIFO data avaliable flag" "0,1"
bitfld.long 0x00 3. "TXFIFO_OVERUN_IE,TXFIFO overun interrupt enable" "0,1"
bitfld.long 0x00 2. "TXFIFO_EMPTY_IE,TXFIFO empty interrupt enable" "0,1"
bitfld.long 0x00 1. "RXFIFO_OVERUN_IE,RXFIFO overun interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_AVAILABLE_IE,RXFIFO data avaliable interrupt enable" "0,1"
group.long 0x2C++0x03
line.long 0x00 "I2S0_I2S_CHANNEL1_TRIGGER_LEVEL_CFG,I2S channel1 trigger level configure(I2S_CHANNEL1_TRIGGER_LEVEL_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "CH_RXFIFO_RESET,channel RXFIFO channel reset" "0,1"
bitfld.long 0x00 8. "CH_TXFIFO_RESET,channel TXFIFO channel reset" "0,1"
bitfld.long 0x00 4.--7. "TXFIFO_EMPTY_TRIG_LEV,channel TXFIFO empty trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "RXFIFO_FULL_TRIG_LEV,channel RXFIFO full trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x30++0x03
line.long 0x00 "I2S0_I2S_CHANNEL2_LEFT_DATA,I2S left data2 register(I2S_LEFT_DATA0)"
hexmask.long 0x00 0.--31. 1. "LEFT_DATA0,channel2 left data"
group.long 0x34++0x03
line.long 0x00 "I2S0_I2S_CHANNEL2_RIGHT_DATA,I2S right data2 register(I2S_RIGHT_DATA0)"
hexmask.long 0x00 0.--31. 1. "RIGHT_DATA0,channel2 right data"
group.long 0x38++0x03
line.long 0x00 "I2S0_I2S_CHANNEL2_CFG,I2S channel2 configure (I2S_CHANNEL0_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 5.--7. "RX_AUDIO_RESOLUTION,channeln rx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--4. "TX_AUDIO_RESOLUTION,channeln tx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1. "RX_EN,channeln receive enable" "0,1"
newline
bitfld.long 0x00 0. "TX_EN,channeln transmit enable" "0,1"
group.long 0x3C++0x03
line.long 0x00 "I2S0_I2S_CHANNEL2_INT_CFG,I2S channel2 interrupt register(I2S_CHANNEL2_INT_REG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 7. "TXFIFO_ORF,TXFIFO overun flag" "0,1"
bitfld.long 0x00 6. "TXFIFO_EMPTYF,TXFIFO empty flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_ORF,RXFIFO overun flag" "0,1"
newline
bitfld.long 0x00 4. "RXFIFO_DAF,RXFIFO data avaliable flag" "0,1"
bitfld.long 0x00 3. "TXFIFO_OVERUN_IE,TXFIFO overun interrupt enable" "0,1"
bitfld.long 0x00 2. "TXFIFO_EMPTY_IE,TXFIFO empty interrupt enable" "0,1"
bitfld.long 0x00 1. "RXFIFO_OVERUN_IE,RXFIFO overun interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_AVAILABLE_IE,RXFIFO data avaliable interrupt enable" "0,1"
group.long 0x40++0x03
line.long 0x00 "I2S0_I2S_CHANNEL2_TRIGGER_LEVEL_CFG,I2S channel2 trigger level configure(I2S_CHANNEL2_TRIGGER_LEVEL_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "CH_RXFIFO_RESET,channel RXFIFO channel reset" "0,1"
bitfld.long 0x00 8. "CH_TXFIFO_RESET,channel TXFIFO channel reset" "0,1"
bitfld.long 0x00 4.--7. "TXFIFO_EMPTY_TRIG_LEV,channel TXFIFO empty trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "RXFIFO_FULL_TRIG_LEV,channel RXFIFO full trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x44++0x03
line.long 0x00 "I2S0_I2S_CHANNEL3_LEFT_DATA,I2S left data3 register(I2S_LEFT_DATA3)"
hexmask.long 0x00 0.--31. 1. "LEFT_DATA3,channel3 left data"
group.long 0x48++0x03
line.long 0x00 "I2S0_I2S_CHANNEL3_RIGHT_DATA,I2S right data3 register(I2S_RIGHT_DATA3)"
hexmask.long 0x00 0.--31. 1. "RIGHT_DATA3,channel3 right data"
group.long 0x4C++0x03
line.long 0x00 "I2S0_I2S_CHANNEL3_CFG,I2S channel3 configure (I2S_CHANNEL3_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 5.--7. "RX_AUDIO_RESOLUTION,channeln rx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--4. "TX_AUDIO_RESOLUTION,channeln tx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1. "RX_EN,channeln receive enable" "0,1"
newline
bitfld.long 0x00 0. "TX_EN,channeln transmit enable" "0,1"
group.long 0x50++0x03
line.long 0x00 "I2S0_I2S_CHANNEL3_INT_CFG,I2S channel3 interrupt register(I2S_CHANNEL3_INT_REG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 7. "TXFIFO_ORF,TXFIFO overun flag" "0,1"
bitfld.long 0x00 6. "TXFIFO_EMPTYF,TXFIFO empty flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_ORF,RXFIFO overun flag" "0,1"
newline
bitfld.long 0x00 4. "RXFIFO_DAF,RXFIFO data avaliable flag" "0,1"
bitfld.long 0x00 3. "TXFIFO_OVERUN_IE,TXFIFO overun interrupt enable" "0,1"
bitfld.long 0x00 2. "TXFIFO_EMPTY_IE,TXFIFO empty interrupt enable" "0,1"
bitfld.long 0x00 1. "RXFIFO_OVERUN_IE,RXFIFO overun interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_AVAILABLE_IE,RXFIFO data avaliable interrupt enable" "0,1"
group.long 0x54++0x03
line.long 0x00 "I2S0_I2S_CHANNEL3_TRIGGER_LEVEL_CFG,I2S channel3 trigger level configure(I2S_CHANNEL3_TRIGGER_LEVEL_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "CH_RXFIFO_RESET,channel RXFIFO channel reset" "0,1"
bitfld.long 0x00 8. "CH_TXFIFO_RESET,channel TXFIFO channel reset" "0,1"
bitfld.long 0x00 4.--7. "TXFIFO_EMPTY_TRIG_LEV,channel TXFIFO empty trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "RXFIFO_FULL_TRIG_LEV,channel RXFIFO full trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x58++0x03
line.long 0x00 "I2S0_I2S_CYCLE_TX_DATA,I2S cycle tx data register"
hexmask.long 0x00 0.--31. 1. "CYCLE_TX_DATA,cycle repeatedly tx data"
group.long 0x5C++0x03
line.long 0x00 "I2S0_I2S_CYCLE_TX_RESET,I2S cycle tx data reset register(I2S_CYCLE_TX_RESET)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,reserve"
bitfld.long 0x00 0. "CYCLE_TX_RESET,i2s cycle tx reset" "0,1"
group.long 0x60++0x03
line.long 0x00 "I2S0_I2S_CYCLE_RX_DATA,I2S cycle RX data register(I2S_CYCLE_RX_DATA)"
hexmask.long 0x00 0.--31. 1. "CYCLE_RX_DATA,cycle repeatedly rx data"
group.long 0x64++0x03
line.long 0x00 "I2S0_I2S_CYCLE_RX_RESET,I2S cycle rx data reset register(I2S_CYCLE_RX_RESET)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,reserve"
bitfld.long 0x00 0. "CYCLE_RX_RESET,i2s cycle rx reset" "0,1"
tree.end
tree "I2S1"
base ad:0x40055000
group.long 0x00++0x03
line.long 0x00 "I2S1_I2S_CONTROL,I2S control register(I2S_CONTROL)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,reserve"
bitfld.long 0x00 4. "I2S_RXFIFO_RESET,I2S RXFIFO reset bit" "0,1"
bitfld.long 0x00 3. "I2S_TXFIFO_RESET,I2S TXFIFO reset bit" "0,1"
bitfld.long 0x00 2. "I2S_RE,I2S receiver enable" "0,1"
newline
bitfld.long 0x00 1. "I2S_TE,I2S transmit enable" "0,1"
bitfld.long 0x00 0. "I2S_MODULE_EN,I2S module enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "I2S1_I2S_MASTER_CONFIG,I2S master configure register(I2S_MASTER_CONFIG)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserve"
hexmask.long.byte 0x00 8.--15. 1. "MCK_DIV,i2s mclk divider"
bitfld.long 0x00 5.--7. "I2S_NUM_BCLK_GATE,I2S gated after the number of bclk cycles" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--4. "RSVD_4_3,reserve" "0,1,2,3"
newline
bitfld.long 0x00 1.--2. "I2S_NUM_BCLK,I2S number of bclk cycles" "0,1,2,3"
bitfld.long 0x00 0. "I2S_MASTER_EN,I2S master mode enable bit" "0,1"
group.long 0x08++0x03
line.long 0x00 "I2S1_I2S_CHANNEL0_LEFT_DATA,I2S left data0 register(I2S_LEFT_DATA0)"
hexmask.long 0x00 0.--31. 1. "LEFT_DATA0,channel0 left data"
group.long 0x0C++0x03
line.long 0x00 "I2S1_I2S_CHANNEL0_RIGHT_DATA,I2S right data0 register(I2S_RIGHT_DATA0)"
hexmask.long 0x00 0.--31. 1. "RIGHT_DATA0,channel0 right data"
group.long 0x10++0x03
line.long 0x00 "I2S1_I2S_CHANNEL0_CFG,I2S channel0 configure (I2S_CHANNEL0_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 5.--7. "RX_AUDIO_RESOLUTION,channeln rx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--4. "TX_AUDIO_RESOLUTION,channeln tx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1. "RX_EN,channeln receive enable" "0,1"
newline
bitfld.long 0x00 0. "TX_EN,channeln transmit enable" "0,1"
group.long 0x14++0x03
line.long 0x00 "I2S1_I2S_CHANNEL0_INT_CFG,I2S channel0 interrupt register(I2S_CHANNEL0_INT_REG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 7. "TXFIFO_ORF,TXFIFO overun flag" "0,1"
bitfld.long 0x00 6. "TXFIFO_EMPTYF,TXFIFO empty flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_ORF,RXFIFO overun flag" "0,1"
newline
bitfld.long 0x00 4. "RXFIFO_DAF,RXFIFO data avaliable flag" "0,1"
bitfld.long 0x00 3. "TXFIFO_OVERUN_IE,TXFIFO overun interrupt enable" "0,1"
bitfld.long 0x00 2. "TXFIFO_EMPTY_IE,TXFIFO empty interrupt enable" "0,1"
bitfld.long 0x00 1. "RXFIFO_OVERUN_IE,RXFIFO overun interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_AVAILABLE_IE,RXFIFO data avaliable interrupt enable" "0,1"
group.long 0x18++0x03
line.long 0x00 "I2S1_I2S_CHANNEL0_TRIGGER_LEVEL_CFG,I2S channel0 trigger level configure(I2S_CHANNEL0_TRIGGER_LEVEL_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "CH_RXFIFO_RESET,channel RXFIFO channel reset" "0,1"
bitfld.long 0x00 8. "CH_TXFIFO_RESET,channel TXFIFO channel reset" "0,1"
bitfld.long 0x00 4.--7. "TXFIFO_EMPTY_TRIG_LEV,channel TXFIFO empty trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "RXFIFO_FULL_TRIG_LEV,channel RXFIFO full trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x1C++0x03
line.long 0x00 "I2S1_I2S_CHANNEL1_LEFT_DATA,I2S left data0 register(I2S_LEFT_DATA1)"
hexmask.long 0x00 0.--31. 1. "LEFT_DATA1,channel1 left data"
group.long 0x20++0x03
line.long 0x00 "I2S1_I2S_CHANNEL1_RIGHT_DATA,I2S right data1 register(I2S_RIGHT_DATA1)"
hexmask.long 0x00 0.--31. 1. "RIGHT_DATA1,channel1 right data"
group.long 0x24++0x03
line.long 0x00 "I2S1_I2S_CHANNEL1_CFG,I2S channel1 configure (I2S_CHANNEL1_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 5.--7. "RX_AUDIO_RESOLUTION,channeln rx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--4. "TX_AUDIO_RESOLUTION,channeln tx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1. "RX_EN,channeln receive enable" "0,1"
newline
bitfld.long 0x00 0. "TX_EN,channeln transmit enable" "0,1"
group.long 0x28++0x03
line.long 0x00 "I2S1_I2S_CHANNEL1_INT_CFG,I2S channel1 interrupt register(I2S_CHANNEL1_INT_REG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 7. "TXFIFO_ORF,TXFIFO overun flag" "0,1"
bitfld.long 0x00 6. "TXFIFO_EMPTYF,TXFIFO empty flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_ORF,RXFIFO overun flag" "0,1"
newline
bitfld.long 0x00 4. "RXFIFO_DAF,RXFIFO data avaliable flag" "0,1"
bitfld.long 0x00 3. "TXFIFO_OVERUN_IE,TXFIFO overun interrupt enable" "0,1"
bitfld.long 0x00 2. "TXFIFO_EMPTY_IE,TXFIFO empty interrupt enable" "0,1"
bitfld.long 0x00 1. "RXFIFO_OVERUN_IE,RXFIFO overun interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_AVAILABLE_IE,RXFIFO data avaliable interrupt enable" "0,1"
group.long 0x2C++0x03
line.long 0x00 "I2S1_I2S_CHANNEL1_TRIGGER_LEVEL_CFG,I2S channel1 trigger level configure(I2S_CHANNEL1_TRIGGER_LEVEL_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "CH_RXFIFO_RESET,channel RXFIFO channel reset" "0,1"
bitfld.long 0x00 8. "CH_TXFIFO_RESET,channel TXFIFO channel reset" "0,1"
bitfld.long 0x00 4.--7. "TXFIFO_EMPTY_TRIG_LEV,channel TXFIFO empty trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "RXFIFO_FULL_TRIG_LEV,channel RXFIFO full trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x30++0x03
line.long 0x00 "I2S1_I2S_CHANNEL2_LEFT_DATA,I2S left data2 register(I2S_LEFT_DATA0)"
hexmask.long 0x00 0.--31. 1. "LEFT_DATA0,channel2 left data"
group.long 0x34++0x03
line.long 0x00 "I2S1_I2S_CHANNEL2_RIGHT_DATA,I2S right data2 register(I2S_RIGHT_DATA0)"
hexmask.long 0x00 0.--31. 1. "RIGHT_DATA0,channel2 right data"
group.long 0x38++0x03
line.long 0x00 "I2S1_I2S_CHANNEL2_CFG,I2S channel2 configure (I2S_CHANNEL0_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 5.--7. "RX_AUDIO_RESOLUTION,channeln rx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--4. "TX_AUDIO_RESOLUTION,channeln tx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1. "RX_EN,channeln receive enable" "0,1"
newline
bitfld.long 0x00 0. "TX_EN,channeln transmit enable" "0,1"
group.long 0x3C++0x03
line.long 0x00 "I2S1_I2S_CHANNEL2_INT_CFG,I2S channel2 interrupt register(I2S_CHANNEL2_INT_REG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 7. "TXFIFO_ORF,TXFIFO overun flag" "0,1"
bitfld.long 0x00 6. "TXFIFO_EMPTYF,TXFIFO empty flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_ORF,RXFIFO overun flag" "0,1"
newline
bitfld.long 0x00 4. "RXFIFO_DAF,RXFIFO data avaliable flag" "0,1"
bitfld.long 0x00 3. "TXFIFO_OVERUN_IE,TXFIFO overun interrupt enable" "0,1"
bitfld.long 0x00 2. "TXFIFO_EMPTY_IE,TXFIFO empty interrupt enable" "0,1"
bitfld.long 0x00 1. "RXFIFO_OVERUN_IE,RXFIFO overun interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_AVAILABLE_IE,RXFIFO data avaliable interrupt enable" "0,1"
group.long 0x40++0x03
line.long 0x00 "I2S1_I2S_CHANNEL2_TRIGGER_LEVEL_CFG,I2S channel2 trigger level configure(I2S_CHANNEL2_TRIGGER_LEVEL_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "CH_RXFIFO_RESET,channel RXFIFO channel reset" "0,1"
bitfld.long 0x00 8. "CH_TXFIFO_RESET,channel TXFIFO channel reset" "0,1"
bitfld.long 0x00 4.--7. "TXFIFO_EMPTY_TRIG_LEV,channel TXFIFO empty trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "RXFIFO_FULL_TRIG_LEV,channel RXFIFO full trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x44++0x03
line.long 0x00 "I2S1_I2S_CHANNEL3_LEFT_DATA,I2S left data3 register(I2S_LEFT_DATA3)"
hexmask.long 0x00 0.--31. 1. "LEFT_DATA3,channel3 left data"
group.long 0x48++0x03
line.long 0x00 "I2S1_I2S_CHANNEL3_RIGHT_DATA,I2S right data3 register(I2S_RIGHT_DATA3)"
hexmask.long 0x00 0.--31. 1. "RIGHT_DATA3,channel3 right data"
group.long 0x4C++0x03
line.long 0x00 "I2S1_I2S_CHANNEL3_CFG,I2S channel3 configure (I2S_CHANNEL3_CFG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 5.--7. "RX_AUDIO_RESOLUTION,channeln rx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--4. "TX_AUDIO_RESOLUTION,channeln tx audio resolution" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1. "RX_EN,channeln receive enable" "0,1"
newline
bitfld.long 0x00 0. "TX_EN,channeln transmit enable" "0,1"
group.long 0x50++0x03
line.long 0x00 "I2S1_I2S_CHANNEL3_INT_CFG,I2S channel3 interrupt register(I2S_CHANNEL3_INT_REG)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,reserve"
bitfld.long 0x00 7. "TXFIFO_ORF,TXFIFO overun flag" "0,1"
bitfld.long 0x00 6. "TXFIFO_EMPTYF,TXFIFO empty flag" "0,1"
bitfld.long 0x00 5. "RXFIFO_ORF,RXFIFO overun flag" "0,1"
newline
bitfld.long 0x00 4. "RXFIFO_DAF,RXFIFO data avaliable flag" "0,1"
bitfld.long 0x00 3. "TXFIFO_OVERUN_IE,TXFIFO overun interrupt enable" "0,1"
bitfld.long 0x00 2. "TXFIFO_EMPTY_IE,TXFIFO empty interrupt enable" "0,1"
bitfld.long 0x00 1. "RXFIFO_OVERUN_IE,RXFIFO overun interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "RXFIFO_AVAILABLE_IE,RXFIFO data avaliable interrupt enable" "0,1"
group.long 0x54++0x03
line.long 0x00 "I2S1_I2S_CHANNEL3_TRIGGER_LEVEL_CFG,I2S channel3 trigger level configure(I2S_CHANNEL3_TRIGGER_LEVEL_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "CH_RXFIFO_RESET,channel RXFIFO channel reset" "0,1"
bitfld.long 0x00 8. "CH_TXFIFO_RESET,channel TXFIFO channel reset" "0,1"
bitfld.long 0x00 4.--7. "TXFIFO_EMPTY_TRIG_LEV,channel TXFIFO empty trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "RXFIFO_FULL_TRIG_LEV,channel RXFIFO full trigger level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x58++0x03
line.long 0x00 "I2S1_I2S_CYCLE_TX_DATA,I2S cycle tx data register"
hexmask.long 0x00 0.--31. 1. "CYCLE_TX_DATA,cycle repeatedly tx data"
group.long 0x5C++0x03
line.long 0x00 "I2S1_I2S_CYCLE_TX_RESET,I2S cycle tx data reset register(I2S_CYCLE_TX_RESET)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,reserve"
bitfld.long 0x00 0. "CYCLE_TX_RESET,i2s cycle tx reset" "0,1"
group.long 0x60++0x03
line.long 0x00 "I2S1_I2S_CYCLE_RX_DATA,I2S cycle RX data register(I2S_CYCLE_RX_DATA)"
hexmask.long 0x00 0.--31. 1. "CYCLE_RX_DATA,cycle repeatedly rx data"
group.long 0x64++0x03
line.long 0x00 "I2S1_I2S_CYCLE_RX_RESET,I2S cycle rx data reset register(I2S_CYCLE_RX_RESET)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,reserve"
bitfld.long 0x00 0. "CYCLE_RX_RESET,i2s cycle rx reset" "0,1"
tree.end
tree.end
tree "MCPWM"
tree "MCPWM0"
base ad:0x4000E000
group.long 0x00++0x03
line.long 0x00 "MCPWM0_MCPWM_TIMEBASE,MCPWM time base register"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 5.--6. "DBGM,Debug mode" "0,1,2,3"
bitfld.long 0x00 2.--4. "PSDIV,Prescaler divider" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--1. "CKSRC,clock source" "0,1,2,3"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x04)++0x03
line.long 0x00 "MCPWM0_MCPWM_CNTn$1,MCPWM counter n register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNT,16-bit counter"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x14)++0x03
line.long 0x00 "MCPWM0_MCPWM_MODn$1,MCPWM counter n modulo value register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "MOD,16-bit counter modulo value"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x24)++0x03
line.long 0x00 "MCPWM0_MCPWM_DTVALn$1,MCPWM deadtime value n register"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
hexmask.long.word 0x00 0.--11. 1. "DTVAL,deadtime value"
repeat.end
group.long 0x34++0x03
line.long 0x00 "MCPWM0_MCPWM_GLBCR,MCPWM global control register"
bitfld.long 0x00 31. "GLBCNTEN,global counter enable" "0,1"
bitfld.long 0x00 30. "WPEN,Write protection enable" "0,1"
bitfld.long 0x00 24.--29. "RSVD_29_24,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 23. "TOIE3,counter 3 overflow interrupt enable" "0,1"
bitfld.long 0x00 22. "TOIE2,counter 2 overflow interrupt enable" "0,1"
bitfld.long 0x00 21. "TOIE1,counter 1 overflow interrupt enable" "0,1"
bitfld.long 0x00 20. "TOIE0,counter 0 overflow interrupt enable" "0,1"
bitfld.long 0x00 19. "RLDIE3,Reload interrupt enable 3" "0,1"
newline
bitfld.long 0x00 18. "RLDIE2,Reload interrupt enable 2" "0,1"
bitfld.long 0x00 17. "RLDIE1,Reload interrupt enable 1" "0,1"
bitfld.long 0x00 16. "RLDIE0,Reload interrupt enable 0" "0,1"
bitfld.long 0x00 15. "CNTEN3,counter 3 enable" "0,1"
bitfld.long 0x00 14. "CNTEN2,counter 2 enable" "0,1"
bitfld.long 0x00 13. "CNTEN1,counter 1 enable" "0,1"
bitfld.long 0x00 12. "CNTEN0,counter 0 enable" "0,1"
bitfld.long 0x00 11. "CNTM3,counter 3 counting mode" "0,1"
newline
bitfld.long 0x00 10. "CNTM2,counter 2 counting mode" "0,1"
bitfld.long 0x00 9. "CNTM1,counter 1 counting mode" "0,1"
bitfld.long 0x00 8. "CNTM0,counter 0 counting mode" "0,1"
bitfld.long 0x00 7. "CHOE7,Channel 7 output enable" "0,1"
bitfld.long 0x00 6. "CHOE6,Channel 6 output enable" "0,1"
bitfld.long 0x00 5. "CHOE5,Channel 5 output enable" "0,1"
bitfld.long 0x00 4. "CHOE4,Channel 4 output enable" "0,1"
bitfld.long 0x00 3. "CHOE3,Channel 3 output enable" "0,1"
newline
bitfld.long 0x00 2. "CHOE2,Channel 2 output enable" "0,1"
bitfld.long 0x00 1. "CHOE1,Channel 1 output enable" "0,1"
bitfld.long 0x00 0. "CHOE0,Channel 0 output enable" "0,1"
group.long 0x38++0x03
line.long 0x00 "MCPWM0_MCPWM_GLBSR,MCPWM global status register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "WPDIS,Write protection disable" "0,1"
bitfld.long 0x00 15. "TOF3,counter 3 timer overflow flag" "0,1"
bitfld.long 0x00 14. "TOF2,counter 2 timer overflow flag" "0,1"
bitfld.long 0x00 13. "TOF1,counter 1 timer overflow flag" "0,1"
bitfld.long 0x00 12. "TOF0,counter 0 timer overflow flag" "0,1"
bitfld.long 0x00 11. "RLDF3,counter 3 reload flag" "0,1"
bitfld.long 0x00 10. "RLDF2,counter 2 reload flag" "0,1"
newline
bitfld.long 0x00 9. "RLDF1,counter 1 reload flag" "0,1"
bitfld.long 0x00 8. "RLDF0,counter 0 reload flag" "0,1"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "0,1"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "0,1"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "0,1"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "0,1"
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "0,1"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "0,1"
newline
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "0,1"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "0,1"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x3C)++0x03
line.long 0x00 "MCPWM0_MCPWM_CFGn$1,MCPWM channel n mode configuration register"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "DMA,DMA enable" "0,1"
bitfld.long 0x00 5. "CHF,Channel flag" "0,1"
bitfld.long 0x00 4. "CHIE,Channel interrupt enable" "0,1"
bitfld.long 0x00 1.--3. "RSVD_3_1,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "CPP,channel pulse polarity" "0,1"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x5C)++0x03
line.long 0x00 "MCPWM0_MCPWM_CVn$1,MCPWM channel n value register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CV,channel value"
repeat.end
group.long 0x7C++0x03
line.long 0x00 "MCPWM0_MCPWM_OUTCR,MCPWM output control register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "OFFVAL7,channel 7 output value when counter is off" "0,1"
bitfld.long 0x00 14. "OFFVAL6,channel 6 output value when counter is off" "0,1"
bitfld.long 0x00 13. "OFFVAL5,channel 5 output value when counter is off" "0,1"
bitfld.long 0x00 12. "OFFVAL4,channel 4 output value when counter is off" "0,1"
bitfld.long 0x00 11. "OFFVAL3,channel 3 output value when counter is off" "0,1"
bitfld.long 0x00 10. "OFFVAL2,channel 2 output value when counter is off" "0,1"
bitfld.long 0x00 9. "OFFVAL1,channel 1 output value when counter is off" "0,1"
newline
bitfld.long 0x00 8. "OFFVAL0,channel 0 output value when counter is off" "0,1"
bitfld.long 0x00 7. "POL7,Channel 7 output polarity" "0,1"
bitfld.long 0x00 6. "POL6,Channel 6 output polarity" "0,1"
bitfld.long 0x00 5. "POL5,Channel 5 output polarity" "0,1"
bitfld.long 0x00 4. "POL4,Channel 4 output polarity" "0,1"
bitfld.long 0x00 3. "POL3,Channel 3 output polarity" "0,1"
bitfld.long 0x00 2. "POL2,Channel 2 output polarity" "0,1"
bitfld.long 0x00 1. "POL1,Channel 1 output polarity" "0,1"
newline
bitfld.long 0x00 0. "POL0,Channel 0 output polarity" "0,1"
group.long 0x80++0x03
line.long 0x00 "MCPWM0_MCPWM_OUTTRIG,MCPWM output trigger register"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,Reserved"
bitfld.long 0x00 9. "TRIGF,Channel output trigger flag" "0,1"
bitfld.long 0x00 8. "INITRIGE,Initialization trigger enable" "0,1"
bitfld.long 0x00 7. "TRIGE7,Channel 7 match trigger enable" "0,1"
bitfld.long 0x00 6. "TRIGE6,Channel 6 match trigger enable" "0,1"
bitfld.long 0x00 5. "TRIGE5,Channel 5 match trigger enable" "0,1"
bitfld.long 0x00 4. "TRIGE4,Channel 4 match trigger enable" "0,1"
bitfld.long 0x00 3. "TRIGE3,Channel 3 match trigger enable" "0,1"
newline
bitfld.long 0x00 2. "TRIGE2,Channel 2 match trigger enable" "0,1"
bitfld.long 0x00 1. "TRIGE1,Channel 1 match trigger enable" "0,1"
bitfld.long 0x00 0. "TRIGE0,Channel 0 match trigger enable" "0,1"
group.long 0x84++0x03
line.long 0x00 "MCPWM0_MCPWM_OUTSWCR,MCPWM channel output software control register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "CH7OCV,Channel 7 output software control value" "0,1"
bitfld.long 0x00 14. "CH6OCV,Channel 6 output software control value" "0,1"
bitfld.long 0x00 13. "CH5OCV,Channel 5 output software control value" "0,1"
bitfld.long 0x00 12. "CH4OCV,Channel 4 output software control value" "0,1"
bitfld.long 0x00 11. "CH3OCV,Channel 3 output software control value" "0,1"
bitfld.long 0x00 10. "CH2OCV,Channel 2 output software control value" "0,1"
bitfld.long 0x00 9. "CH1OCV,Channel 1 output software control value" "0,1"
newline
bitfld.long 0x00 8. "CH0OCV,Channel 0 output software control value" "0,1"
bitfld.long 0x00 7. "CH7OC,Channel 7 output software control enable" "0,1"
bitfld.long 0x00 6. "CH6OC,Channel 6 output software control enable" "0,1"
bitfld.long 0x00 5. "CH5OC,Channel 5 output software control enable" "0,1"
bitfld.long 0x00 4. "CH4OC,Channel 4 output software control enable" "0,1"
bitfld.long 0x00 3. "CH3OC,Channel 3 output software control enable" "0,1"
bitfld.long 0x00 2. "CH2OC,Channel 2 output software control enable" "0,1"
bitfld.long 0x00 1. "CH1OC,Channel 1 output software control enable" "0,1"
newline
bitfld.long 0x00 0. "CH0OC,Channel 0 output software control enable" "0,1"
group.long 0x88++0x03
line.long 0x00 "MCPWM0_MCPWM_PCR,MCPWM pairs of channel control register"
bitfld.long 0x00 31. "RSVD_31,Reserved" "0,1"
bitfld.long 0x00 30. "COMB3,Combine enable for pairs of channel 3" "0,1"
bitfld.long 0x00 29. "PEC3,pulse edge control for pairs of channel 3" "0,1"
bitfld.long 0x00 28. "CVSEL3,channel value selection of PWM output for pairs of channel 3" "0,1"
bitfld.long 0x00 27. "ASYMEN3,asymmetric PWM output enable for pairs of channel 3" "0,1"
bitfld.long 0x00 26. "SYNCEN3,Synchronization enable for pairs of channel 3" "0,1"
bitfld.long 0x00 25. "DTEN3,Deadtime insertion enable for pairs of channel 3" "0,1"
bitfld.long 0x00 24. "FCTLEN3,Fault control enabled for pairs of channel 3" "0,1"
newline
bitfld.long 0x00 23. "RSVD_23,Reserved" "0,1"
bitfld.long 0x00 22. "COMB2,Combine enable for pairs of channel 2" "0,1"
bitfld.long 0x00 21. "PEC2,pulse edge control for pairs of channel 2" "0,1"
bitfld.long 0x00 20. "CVSEL2,channel value selection of PWM output for pairs of channel 2" "0,1"
bitfld.long 0x00 19. "ASYMEN2,asymmetric PWM output enable for pairs of channel 2" "0,1"
bitfld.long 0x00 18. "SYNCEN2,Synchronization enable for pairs of channel 2" "0,1"
bitfld.long 0x00 17. "DTEN2,Deadtime insertion enable for pairs of channel 2" "0,1"
bitfld.long 0x00 16. "FCTLEN2,Fault control enabled for pairs of channel 2" "0,1"
newline
bitfld.long 0x00 15. "RSVD_15,Reserved" "0,1"
bitfld.long 0x00 14. "COMB1,Combine enable for pairs of channel 1" "0,1"
bitfld.long 0x00 13. "PEC1,pulse edge control for pairs of channel 1" "0,1"
bitfld.long 0x00 12. "CVSEL1,channel value selection of PWM output for pairs of channel 1" "0,1"
bitfld.long 0x00 11. "ASYMEN1,asymmetric PWM output enable for pairs of channel 1" "0,1"
bitfld.long 0x00 10. "SYNCEN1,Synchronization enable for pairs of channel 1" "0,1"
bitfld.long 0x00 9. "DTEN1,Deadtime insertion enable for pairs of channel 1" "0,1"
bitfld.long 0x00 8. "FCTLEN1,Fault control enabled for pairs of channel 1" "0,1"
newline
bitfld.long 0x00 7. "RSVD_7,Reserved" "0,1"
bitfld.long 0x00 6. "COMB0,Combine enable for pairs of channel 0" "0,1"
bitfld.long 0x00 5. "PEC0,pulse edge control for pairs of channel 0" "0,1"
bitfld.long 0x00 4. "CVSEL0,channel value selection of PWM output for pairs of channel 0" "0,1"
bitfld.long 0x00 3. "ASYMEN0,asymmetric PWM output enable for pairs of channel 0" "0,1"
bitfld.long 0x00 2. "SYNCEN0,Synchronization enable for pairs of channel 0" "0,1"
bitfld.long 0x00 1. "DTEN0,Deadtime insertion enable for pairs of channel 0" "0,1"
bitfld.long 0x00 0. "FCTLEN0,Fault control enabled for pairs of channel 0" "0,1"
group.long 0x8C++0x03
line.long 0x00 "MCPWM0_MCPWM_FLTCR,MCPWM fault control control register"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 20. "FSTATE,Fault output status" "0,1"
bitfld.long 0x00 16.--19. "FIFVAL,Fault input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "FLTCM,Falut clear mode" "0,1"
bitfld.long 0x00 12. "FLTIE,Fault interrupt enable" "0,1"
bitfld.long 0x00 11. "FLTPOL3,Fault input channel 3 polarity" "0,1"
bitfld.long 0x00 10. "FLTPOL2,Fault input channel 2 polarity" "0,1"
newline
bitfld.long 0x00 9. "FLTPOL1,Fault input channel 1 polarity" "0,1"
bitfld.long 0x00 8. "FLTPOL0,Fault input channel 0 polarity" "0,1"
bitfld.long 0x00 7. "FLTEN3,Fault input enable 3" "0,1"
bitfld.long 0x00 6. "FLTEN2,Fault input enable 2" "0,1"
bitfld.long 0x00 5. "FLTEN1,Fault input enable 1" "0,1"
bitfld.long 0x00 4. "FLTEN0,Fault input enable 0" "0,1"
bitfld.long 0x00 3. "FIFEN3,Fault input filter enable 3" "0,1"
bitfld.long 0x00 2. "FIFEN2,Fault input filter enable 2" "0,1"
newline
bitfld.long 0x00 1. "FIFEN1,Fault input filter enable 1" "0,1"
bitfld.long 0x00 0. "FIFEN0,Fault input filter enable 0" "0,1"
group.long 0x90++0x03
line.long 0x00 "MCPWM0_MCPWM_FLTSR,MCPWM fault status register"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "FAULTINB,Fault input B value" "0,1"
bitfld.long 0x00 6. "FAULTINA,Fault input A value" "0,1"
bitfld.long 0x00 5. "FAULTFB,Fault detection flag B" "0,1"
bitfld.long 0x00 4. "FAULTFA,Fault detection flag A" "0,1"
bitfld.long 0x00 3. "FAULTF3,Fault detection flag of fault channel 3" "0,1"
bitfld.long 0x00 2. "FAULTF2,Fault detection flag of fault channel 2" "0,1"
bitfld.long 0x00 1. "FAULTF1,Fault detection flag of fault channel 1" "0,1"
newline
bitfld.long 0x00 0. "FAULTF0,Fault detection flag of fault channel 0" "0,1"
group.long 0x94++0x03
line.long 0x00 "MCPWM0_MCPWM_FLTASS,MCPWM fault A safe status value register"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "FLTASS7,Channel 7 safe status value for fault A" "0,1"
bitfld.long 0x00 6. "FLTASS6,Channel 6 safe status value for fault A" "0,1"
bitfld.long 0x00 5. "FLTASS5,Channel 5 safe status value for fault A" "0,1"
bitfld.long 0x00 4. "FLTASS4,Channel 4 safe status value for fault A" "0,1"
bitfld.long 0x00 3. "FLTASS3,Channel 3 safe status value for fault A" "0,1"
bitfld.long 0x00 2. "FLTASS2,Channel 2 safe status value for fault A" "0,1"
bitfld.long 0x00 1. "FLTASS1,Channel 1 safe status value for fault A" "0,1"
newline
bitfld.long 0x00 0. "FLTASS0,Channel 0 safe status value for fault A" "0,1"
group.long 0x98++0x03
line.long 0x00 "MCPWM0_MCPWM_FLTBSS,MCPWM fault B safe status value register"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "FLTBSS7,Channel 7 safe status value for fault B" "0,1"
bitfld.long 0x00 6. "FLTBSS6,Channel 6 safe status value for fault B" "0,1"
bitfld.long 0x00 5. "FLTBSS5,Channel 5 safe status value for fault B" "0,1"
bitfld.long 0x00 4. "FLTBSS4,Channel 4 safe status value for fault B" "0,1"
bitfld.long 0x00 3. "FLTBSS3,Channel 3 safe status value for fault B" "0,1"
bitfld.long 0x00 2. "FLTBSS2,Channel 2 safe status value for fault B" "0,1"
bitfld.long 0x00 1. "FLTBSS1,Channel 1 safe status value for fault B" "0,1"
newline
bitfld.long 0x00 0. "FLTBSS0,Channel 0 safe status value for fault B" "0,1"
group.long 0x9C++0x03
line.long 0x00 "MCPWM0_MCPWM_SYNC,MCPWM synchronization register"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "SWRSTCNT,Software trigger reset counter" "0,1"
bitfld.long 0x00 2. "SWWRBUF,Software trigger activate write buffer synchronization" "0,1"
bitfld.long 0x00 1. "SYNCOSWC,OUTSWCR register synchronization" "0,1"
bitfld.long 0x00 0. "SWTRIG,software trigger synchronization" "0,1"
group.long 0xA0++0x03
line.long 0x00 "MCPWM0_MCPWM_RELOAD,MCPWM reload register"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
bitfld.long 0x00 11. "LOADEN3,Reload enable for pairs of channel 3" "0,1"
bitfld.long 0x00 10. "LOADEN2,Reload enable for pairs of channel 2" "0,1"
bitfld.long 0x00 9. "LOADEN1,Reload enable for pairs of channel 1" "0,1"
bitfld.long 0x00 8. "LOADEN0,Reload enable for pairs of channel 0" "0,1"
bitfld.long 0x00 7. "CPWMHCR3,CPWM half cycle reload enable 3" "0,1"
bitfld.long 0x00 6. "CPWMHCR2,CPWM half cycle reload enable 2" "0,1"
bitfld.long 0x00 5. "CPWMHCR1,CPWM half cycle reload enable 1" "0,1"
newline
bitfld.long 0x00 4. "CPWMHCR0,CPWM half cycle reload enable 0" "0,1"
bitfld.long 0x00 3. "CPWMFCR3,CPWM full cycle reload enable 3" "0,1"
bitfld.long 0x00 2. "CPWMFCR2,CPWM full cycle reload enable 2" "0,1"
bitfld.long 0x00 1. "CPWMFCR1,CPWM full cycle reload enable 1" "0,1"
bitfld.long 0x00 0. "CPWMFCR0,CPWM full cycle reload enable 0" "0,1"
group.long 0xA4++0x03
line.long 0x00 "MCPWM0_MCPWM_LDFREQ,MCPWM reload frequency register"
bitfld.long 0x00 29.--31. "RSVD_31_29,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "LDFREQ3,Reload frequency 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "LDFREQ2,Reload frequency 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--12. "LDFREQ1,Reload frequency 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "LDFREQ0,Reload frequency 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x100)++0x03
line.long 0x00 "MCPWM0_MCPWM_MODn_DITHER$1,MCPWM MODn dither register"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 0.--4. "MOD_DITHER,MOD dither value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C )
group.long ($2+0x110)++0x03
line.long 0x00 "MCPWM0_MCPWM_CVn_DITHER$1,MCPWM CVn dither register"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 0.--4. "CV_DITHER,CV dither value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
tree.end
tree "MCPWM1"
base ad:0x4001A000
group.long 0x00++0x03
line.long 0x00 "MCPWM1_MCPWM_TIMEBASE,MCPWM time base register"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 5.--6. "DBGM,Debug mode" "0,1,2,3"
bitfld.long 0x00 2.--4. "PSDIV,Prescaler divider" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--1. "CKSRC,clock source" "0,1,2,3"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x04)++0x03
line.long 0x00 "MCPWM1_MCPWM_CNTn$1,MCPWM counter n register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNT,16-bit counter"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x14)++0x03
line.long 0x00 "MCPWM1_MCPWM_MODn$1,MCPWM counter n modulo value register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "MOD,16-bit counter modulo value"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x24)++0x03
line.long 0x00 "MCPWM1_MCPWM_DTVALn$1,MCPWM deadtime value n register"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
hexmask.long.word 0x00 0.--11. 1. "DTVAL,deadtime value"
repeat.end
group.long 0x34++0x03
line.long 0x00 "MCPWM1_MCPWM_GLBCR,MCPWM global control register"
bitfld.long 0x00 31. "GLBCNTEN,global counter enable" "0,1"
bitfld.long 0x00 30. "WPEN,Write protection enable" "0,1"
bitfld.long 0x00 24.--29. "RSVD_29_24,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 23. "TOIE3,counter 3 overflow interrupt enable" "0,1"
bitfld.long 0x00 22. "TOIE2,counter 2 overflow interrupt enable" "0,1"
bitfld.long 0x00 21. "TOIE1,counter 1 overflow interrupt enable" "0,1"
bitfld.long 0x00 20. "TOIE0,counter 0 overflow interrupt enable" "0,1"
bitfld.long 0x00 19. "RLDIE3,Reload interrupt enable 3" "0,1"
newline
bitfld.long 0x00 18. "RLDIE2,Reload interrupt enable 2" "0,1"
bitfld.long 0x00 17. "RLDIE1,Reload interrupt enable 1" "0,1"
bitfld.long 0x00 16. "RLDIE0,Reload interrupt enable 0" "0,1"
bitfld.long 0x00 15. "CNTEN3,counter 3 enable" "0,1"
bitfld.long 0x00 14. "CNTEN2,counter 2 enable" "0,1"
bitfld.long 0x00 13. "CNTEN1,counter 1 enable" "0,1"
bitfld.long 0x00 12. "CNTEN0,counter 0 enable" "0,1"
bitfld.long 0x00 11. "CNTM3,counter 3 counting mode" "0,1"
newline
bitfld.long 0x00 10. "CNTM2,counter 2 counting mode" "0,1"
bitfld.long 0x00 9. "CNTM1,counter 1 counting mode" "0,1"
bitfld.long 0x00 8. "CNTM0,counter 0 counting mode" "0,1"
bitfld.long 0x00 7. "CHOE7,Channel 7 output enable" "0,1"
bitfld.long 0x00 6. "CHOE6,Channel 6 output enable" "0,1"
bitfld.long 0x00 5. "CHOE5,Channel 5 output enable" "0,1"
bitfld.long 0x00 4. "CHOE4,Channel 4 output enable" "0,1"
bitfld.long 0x00 3. "CHOE3,Channel 3 output enable" "0,1"
newline
bitfld.long 0x00 2. "CHOE2,Channel 2 output enable" "0,1"
bitfld.long 0x00 1. "CHOE1,Channel 1 output enable" "0,1"
bitfld.long 0x00 0. "CHOE0,Channel 0 output enable" "0,1"
group.long 0x38++0x03
line.long 0x00 "MCPWM1_MCPWM_GLBSR,MCPWM global status register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "WPDIS,Write protection disable" "0,1"
bitfld.long 0x00 15. "TOF3,counter 3 timer overflow flag" "0,1"
bitfld.long 0x00 14. "TOF2,counter 2 timer overflow flag" "0,1"
bitfld.long 0x00 13. "TOF1,counter 1 timer overflow flag" "0,1"
bitfld.long 0x00 12. "TOF0,counter 0 timer overflow flag" "0,1"
bitfld.long 0x00 11. "RLDF3,counter 3 reload flag" "0,1"
bitfld.long 0x00 10. "RLDF2,counter 2 reload flag" "0,1"
newline
bitfld.long 0x00 9. "RLDF1,counter 1 reload flag" "0,1"
bitfld.long 0x00 8. "RLDF0,counter 0 reload flag" "0,1"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "0,1"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "0,1"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "0,1"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "0,1"
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "0,1"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "0,1"
newline
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "0,1"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "0,1"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x3C)++0x03
line.long 0x00 "MCPWM1_MCPWM_CFGn$1,MCPWM channel n mode configuration register"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "DMA,DMA enable" "0,1"
bitfld.long 0x00 5. "CHF,Channel flag" "0,1"
bitfld.long 0x00 4. "CHIE,Channel interrupt enable" "0,1"
bitfld.long 0x00 1.--3. "RSVD_3_1,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "CPP,channel pulse polarity" "0,1"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x5C)++0x03
line.long 0x00 "MCPWM1_MCPWM_CVn$1,MCPWM channel n value register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CV,channel value"
repeat.end
group.long 0x7C++0x03
line.long 0x00 "MCPWM1_MCPWM_OUTCR,MCPWM output control register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "OFFVAL7,channel 7 output value when counter is off" "0,1"
bitfld.long 0x00 14. "OFFVAL6,channel 6 output value when counter is off" "0,1"
bitfld.long 0x00 13. "OFFVAL5,channel 5 output value when counter is off" "0,1"
bitfld.long 0x00 12. "OFFVAL4,channel 4 output value when counter is off" "0,1"
bitfld.long 0x00 11. "OFFVAL3,channel 3 output value when counter is off" "0,1"
bitfld.long 0x00 10. "OFFVAL2,channel 2 output value when counter is off" "0,1"
bitfld.long 0x00 9. "OFFVAL1,channel 1 output value when counter is off" "0,1"
newline
bitfld.long 0x00 8. "OFFVAL0,channel 0 output value when counter is off" "0,1"
bitfld.long 0x00 7. "POL7,Channel 7 output polarity" "0,1"
bitfld.long 0x00 6. "POL6,Channel 6 output polarity" "0,1"
bitfld.long 0x00 5. "POL5,Channel 5 output polarity" "0,1"
bitfld.long 0x00 4. "POL4,Channel 4 output polarity" "0,1"
bitfld.long 0x00 3. "POL3,Channel 3 output polarity" "0,1"
bitfld.long 0x00 2. "POL2,Channel 2 output polarity" "0,1"
bitfld.long 0x00 1. "POL1,Channel 1 output polarity" "0,1"
newline
bitfld.long 0x00 0. "POL0,Channel 0 output polarity" "0,1"
group.long 0x80++0x03
line.long 0x00 "MCPWM1_MCPWM_OUTTRIG,MCPWM output trigger register"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,Reserved"
bitfld.long 0x00 9. "TRIGF,Channel output trigger flag" "0,1"
bitfld.long 0x00 8. "INITRIGE,Initialization trigger enable" "0,1"
bitfld.long 0x00 7. "TRIGE7,Channel 7 match trigger enable" "0,1"
bitfld.long 0x00 6. "TRIGE6,Channel 6 match trigger enable" "0,1"
bitfld.long 0x00 5. "TRIGE5,Channel 5 match trigger enable" "0,1"
bitfld.long 0x00 4. "TRIGE4,Channel 4 match trigger enable" "0,1"
bitfld.long 0x00 3. "TRIGE3,Channel 3 match trigger enable" "0,1"
newline
bitfld.long 0x00 2. "TRIGE2,Channel 2 match trigger enable" "0,1"
bitfld.long 0x00 1. "TRIGE1,Channel 1 match trigger enable" "0,1"
bitfld.long 0x00 0. "TRIGE0,Channel 0 match trigger enable" "0,1"
group.long 0x84++0x03
line.long 0x00 "MCPWM1_MCPWM_OUTSWCR,MCPWM channel output software control register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "CH7OCV,Channel 7 output software control value" "0,1"
bitfld.long 0x00 14. "CH6OCV,Channel 6 output software control value" "0,1"
bitfld.long 0x00 13. "CH5OCV,Channel 5 output software control value" "0,1"
bitfld.long 0x00 12. "CH4OCV,Channel 4 output software control value" "0,1"
bitfld.long 0x00 11. "CH3OCV,Channel 3 output software control value" "0,1"
bitfld.long 0x00 10. "CH2OCV,Channel 2 output software control value" "0,1"
bitfld.long 0x00 9. "CH1OCV,Channel 1 output software control value" "0,1"
newline
bitfld.long 0x00 8. "CH0OCV,Channel 0 output software control value" "0,1"
bitfld.long 0x00 7. "CH7OC,Channel 7 output software control enable" "0,1"
bitfld.long 0x00 6. "CH6OC,Channel 6 output software control enable" "0,1"
bitfld.long 0x00 5. "CH5OC,Channel 5 output software control enable" "0,1"
bitfld.long 0x00 4. "CH4OC,Channel 4 output software control enable" "0,1"
bitfld.long 0x00 3. "CH3OC,Channel 3 output software control enable" "0,1"
bitfld.long 0x00 2. "CH2OC,Channel 2 output software control enable" "0,1"
bitfld.long 0x00 1. "CH1OC,Channel 1 output software control enable" "0,1"
newline
bitfld.long 0x00 0. "CH0OC,Channel 0 output software control enable" "0,1"
group.long 0x88++0x03
line.long 0x00 "MCPWM1_MCPWM_PCR,MCPWM pairs of channel control register"
bitfld.long 0x00 31. "RSVD_31,Reserved" "0,1"
bitfld.long 0x00 30. "COMB3,Combine enable for pairs of channel 3" "0,1"
bitfld.long 0x00 29. "PEC3,pulse edge control for pairs of channel 3" "0,1"
bitfld.long 0x00 28. "CVSEL3,channel value selection of PWM output for pairs of channel 3" "0,1"
bitfld.long 0x00 27. "ASYMEN3,asymmetric PWM output enable for pairs of channel 3" "0,1"
bitfld.long 0x00 26. "SYNCEN3,Synchronization enable for pairs of channel 3" "0,1"
bitfld.long 0x00 25. "DTEN3,Deadtime insertion enable for pairs of channel 3" "0,1"
bitfld.long 0x00 24. "FCTLEN3,Fault control enabled for pairs of channel 3" "0,1"
newline
bitfld.long 0x00 23. "RSVD_23,Reserved" "0,1"
bitfld.long 0x00 22. "COMB2,Combine enable for pairs of channel 2" "0,1"
bitfld.long 0x00 21. "PEC2,pulse edge control for pairs of channel 2" "0,1"
bitfld.long 0x00 20. "CVSEL2,channel value selection of PWM output for pairs of channel 2" "0,1"
bitfld.long 0x00 19. "ASYMEN2,asymmetric PWM output enable for pairs of channel 2" "0,1"
bitfld.long 0x00 18. "SYNCEN2,Synchronization enable for pairs of channel 2" "0,1"
bitfld.long 0x00 17. "DTEN2,Deadtime insertion enable for pairs of channel 2" "0,1"
bitfld.long 0x00 16. "FCTLEN2,Fault control enabled for pairs of channel 2" "0,1"
newline
bitfld.long 0x00 15. "RSVD_15,Reserved" "0,1"
bitfld.long 0x00 14. "COMB1,Combine enable for pairs of channel 1" "0,1"
bitfld.long 0x00 13. "PEC1,pulse edge control for pairs of channel 1" "0,1"
bitfld.long 0x00 12. "CVSEL1,channel value selection of PWM output for pairs of channel 1" "0,1"
bitfld.long 0x00 11. "ASYMEN1,asymmetric PWM output enable for pairs of channel 1" "0,1"
bitfld.long 0x00 10. "SYNCEN1,Synchronization enable for pairs of channel 1" "0,1"
bitfld.long 0x00 9. "DTEN1,Deadtime insertion enable for pairs of channel 1" "0,1"
bitfld.long 0x00 8. "FCTLEN1,Fault control enabled for pairs of channel 1" "0,1"
newline
bitfld.long 0x00 7. "RSVD_7,Reserved" "0,1"
bitfld.long 0x00 6. "COMB0,Combine enable for pairs of channel 0" "0,1"
bitfld.long 0x00 5. "PEC0,pulse edge control for pairs of channel 0" "0,1"
bitfld.long 0x00 4. "CVSEL0,channel value selection of PWM output for pairs of channel 0" "0,1"
bitfld.long 0x00 3. "ASYMEN0,asymmetric PWM output enable for pairs of channel 0" "0,1"
bitfld.long 0x00 2. "SYNCEN0,Synchronization enable for pairs of channel 0" "0,1"
bitfld.long 0x00 1. "DTEN0,Deadtime insertion enable for pairs of channel 0" "0,1"
bitfld.long 0x00 0. "FCTLEN0,Fault control enabled for pairs of channel 0" "0,1"
group.long 0x8C++0x03
line.long 0x00 "MCPWM1_MCPWM_FLTCR,MCPWM fault control control register"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 20. "FSTATE,Fault output status" "0,1"
bitfld.long 0x00 16.--19. "FIFVAL,Fault input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "FLTCM,Falut clear mode" "0,1"
bitfld.long 0x00 12. "FLTIE,Fault interrupt enable" "0,1"
bitfld.long 0x00 11. "FLTPOL3,Fault input channel 3 polarity" "0,1"
bitfld.long 0x00 10. "FLTPOL2,Fault input channel 2 polarity" "0,1"
newline
bitfld.long 0x00 9. "FLTPOL1,Fault input channel 1 polarity" "0,1"
bitfld.long 0x00 8. "FLTPOL0,Fault input channel 0 polarity" "0,1"
bitfld.long 0x00 7. "FLTEN3,Fault input enable 3" "0,1"
bitfld.long 0x00 6. "FLTEN2,Fault input enable 2" "0,1"
bitfld.long 0x00 5. "FLTEN1,Fault input enable 1" "0,1"
bitfld.long 0x00 4. "FLTEN0,Fault input enable 0" "0,1"
bitfld.long 0x00 3. "FIFEN3,Fault input filter enable 3" "0,1"
bitfld.long 0x00 2. "FIFEN2,Fault input filter enable 2" "0,1"
newline
bitfld.long 0x00 1. "FIFEN1,Fault input filter enable 1" "0,1"
bitfld.long 0x00 0. "FIFEN0,Fault input filter enable 0" "0,1"
group.long 0x90++0x03
line.long 0x00 "MCPWM1_MCPWM_FLTSR,MCPWM fault status register"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "FAULTINB,Fault input B value" "0,1"
bitfld.long 0x00 6. "FAULTINA,Fault input A value" "0,1"
bitfld.long 0x00 5. "FAULTFB,Fault detection flag B" "0,1"
bitfld.long 0x00 4. "FAULTFA,Fault detection flag A" "0,1"
bitfld.long 0x00 3. "FAULTF3,Fault detection flag of fault channel 3" "0,1"
bitfld.long 0x00 2. "FAULTF2,Fault detection flag of fault channel 2" "0,1"
bitfld.long 0x00 1. "FAULTF1,Fault detection flag of fault channel 1" "0,1"
newline
bitfld.long 0x00 0. "FAULTF0,Fault detection flag of fault channel 0" "0,1"
group.long 0x94++0x03
line.long 0x00 "MCPWM1_MCPWM_FLTASS,MCPWM fault A safe status value register"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "FLTASS7,Channel 7 safe status value for fault A" "0,1"
bitfld.long 0x00 6. "FLTASS6,Channel 6 safe status value for fault A" "0,1"
bitfld.long 0x00 5. "FLTASS5,Channel 5 safe status value for fault A" "0,1"
bitfld.long 0x00 4. "FLTASS4,Channel 4 safe status value for fault A" "0,1"
bitfld.long 0x00 3. "FLTASS3,Channel 3 safe status value for fault A" "0,1"
bitfld.long 0x00 2. "FLTASS2,Channel 2 safe status value for fault A" "0,1"
bitfld.long 0x00 1. "FLTASS1,Channel 1 safe status value for fault A" "0,1"
newline
bitfld.long 0x00 0. "FLTASS0,Channel 0 safe status value for fault A" "0,1"
group.long 0x98++0x03
line.long 0x00 "MCPWM1_MCPWM_FLTBSS,MCPWM fault B safe status value register"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "FLTBSS7,Channel 7 safe status value for fault B" "0,1"
bitfld.long 0x00 6. "FLTBSS6,Channel 6 safe status value for fault B" "0,1"
bitfld.long 0x00 5. "FLTBSS5,Channel 5 safe status value for fault B" "0,1"
bitfld.long 0x00 4. "FLTBSS4,Channel 4 safe status value for fault B" "0,1"
bitfld.long 0x00 3. "FLTBSS3,Channel 3 safe status value for fault B" "0,1"
bitfld.long 0x00 2. "FLTBSS2,Channel 2 safe status value for fault B" "0,1"
bitfld.long 0x00 1. "FLTBSS1,Channel 1 safe status value for fault B" "0,1"
newline
bitfld.long 0x00 0. "FLTBSS0,Channel 0 safe status value for fault B" "0,1"
group.long 0x9C++0x03
line.long 0x00 "MCPWM1_MCPWM_SYNC,MCPWM synchronization register"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "SWRSTCNT,Software trigger reset counter" "0,1"
bitfld.long 0x00 2. "SWWRBUF,Software trigger activate write buffer synchronization" "0,1"
bitfld.long 0x00 1. "SYNCOSWC,OUTSWCR register synchronization" "0,1"
bitfld.long 0x00 0. "SWTRIG,software trigger synchronization" "0,1"
group.long 0xA0++0x03
line.long 0x00 "MCPWM1_MCPWM_RELOAD,MCPWM reload register"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
bitfld.long 0x00 11. "LOADEN3,Reload enable for pairs of channel 3" "0,1"
bitfld.long 0x00 10. "LOADEN2,Reload enable for pairs of channel 2" "0,1"
bitfld.long 0x00 9. "LOADEN1,Reload enable for pairs of channel 1" "0,1"
bitfld.long 0x00 8. "LOADEN0,Reload enable for pairs of channel 0" "0,1"
bitfld.long 0x00 7. "CPWMHCR3,CPWM half cycle reload enable 3" "0,1"
bitfld.long 0x00 6. "CPWMHCR2,CPWM half cycle reload enable 2" "0,1"
bitfld.long 0x00 5. "CPWMHCR1,CPWM half cycle reload enable 1" "0,1"
newline
bitfld.long 0x00 4. "CPWMHCR0,CPWM half cycle reload enable 0" "0,1"
bitfld.long 0x00 3. "CPWMFCR3,CPWM full cycle reload enable 3" "0,1"
bitfld.long 0x00 2. "CPWMFCR2,CPWM full cycle reload enable 2" "0,1"
bitfld.long 0x00 1. "CPWMFCR1,CPWM full cycle reload enable 1" "0,1"
bitfld.long 0x00 0. "CPWMFCR0,CPWM full cycle reload enable 0" "0,1"
group.long 0xA4++0x03
line.long 0x00 "MCPWM1_MCPWM_LDFREQ,MCPWM reload frequency register"
bitfld.long 0x00 29.--31. "RSVD_31_29,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "LDFREQ3,Reload frequency 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "RSVD_23_21,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--20. "LDFREQ2,Reload frequency 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "RSVD_15_13,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--12. "LDFREQ1,Reload frequency 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "RSVD_7_5,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--4. "LDFREQ0,Reload frequency 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x100)++0x03
line.long 0x00 "MCPWM1_MCPWM_MODn_DITHER$1,MCPWM MODn dither register"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 0.--4. "MOD_DITHER,MOD dither value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C )
group.long ($2+0x110)++0x03
line.long 0x00 "MCPWM1_MCPWM_CVn_DITHER$1,MCPWM CVn dither register"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 0.--4. "CV_DITHER,CV dither value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
tree.end
tree.end
tree "PARCC"
base ad:0x40065000
rgroup.long 0x00++0x03
line.long 0x00 "PARCC_x,Peripheral AccessResetClock Control (PARCC_x)"
bitfld.long 0x00 31. "LOCK,Write register lock" "0,1"
bitfld.long 0x00 28.--30. "RSVD_30_28,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 27. "PSUPVACPR,Peripheral supervisor access control present" "0,1"
bitfld.long 0x00 26. "PCLKDIVPR,Peripheral clock divider present" "0,1"
bitfld.long 0x00 25. "PCLKMUXPR,Peripheral clock mux present" "0,1"
bitfld.long 0x00 24. "PPR,Peripheral present" "0,1"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 21. "PRSTB,Peripheral reset_b" "0,1"
bitfld.long 0x00 20. "PSUPVACEN,Peripheral supervisor access control enable" "0,1"
bitfld.long 0x00 17.--19. "RSVD_19_17,Reserved" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16. "PWLK,Peripheral write lock" "0,1"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "CLKDIV,Peripheral funcional clock divider" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "RSVD_7,Reserved" "0,1"
bitfld.long 0x00 4.--6. "CLKMUX,Peripheral funcional clock source mux" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--1. "PCKMD,Peripheral Clock Mode" "0,1,2,3"
tree.end
tree "PMU (Program Memory Unit)"
base ad:0x4007D000
group.long 0x00++0x03
line.long 0x00 "PMU_LOCK,PMU lock protection register(PMU_LOCK_USER)"
bitfld.long 0x00 31. "LOCK,PMU LOCK protection bit" "0,1"
hexmask.long 0x00 0.--30. 1. "RSVD_30_0,reserve"
group.long 0x04++0x03
line.long 0x00 "PMU_LPO_32K_CFG,PMU LPO32K control register(PMU_LPO32K_CFG)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,reserve"
bitfld.long 0x00 2. "LPO_CLK_READY,LPO raw clock ready flag" "0,1"
bitfld.long 0x00 1. "LPO_CLK_SEL,LPO clock select bit" "0,1"
bitfld.long 0x00 0. "LPO_CLK_DIS,LPO clock disable bit" "0,1"
group.long 0x08++0x03
line.long 0x00 "PMU_LPO_32K_TRIM,PMU LPO32K trim reigster(PMU_LPO32K_TRIM)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,reserve"
hexmask.long.byte 0x00 0.--6. 1. "LPO_32K_TRIM,LPO32K trim"
group.long 0x0C++0x03
line.long 0x00 "PMU_ISO_CLR,PMU isolation clear register(PMU_ISO_CLR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,reserve"
bitfld.long 0x00 0. "ISO_CLR,isolation w1c clear bit" "0,1"
group.long 0x10++0x03
line.long 0x00 "PMU_CSR,PMU control and status register(PMU_CSR)"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,reserve"
bitfld.long 0x00 11. "IREF_EN,iref1uA enable bit" "0,1"
bitfld.long 0x00 10. "VOLTAGE_TRIM_DONE,voltage trim done flag" "0,1"
bitfld.long 0x00 9. "HS_LDO_TRIM_SEL,high speed trim select bit" "0,1"
newline
bitfld.long 0x00 8. "REF_BUF_1V_EN,Reference 1V output enable with buf control" "0,1"
bitfld.long 0x00 7. "LVDF_VDD,VDD5v LVD flag" "0,1"
bitfld.long 0x00 6. "LVWF_VDD,VDD5v LVW detect flag" "0,1"
bitfld.long 0x00 5. "VDD_LVW_IE,VDD5v LVW interrupt enable" "0,1"
newline
bitfld.long 0x00 4. "VDD_LVW_EN,VDD5v LVW detect control bit" "0,1"
bitfld.long 0x00 3. "VDD_LVD_RE,VDD5v LVD reset enable control bit" "0,1"
bitfld.long 0x00 2. "VDD_LVD_IE,VDD5v LVD interrupt enable control" "0,1"
bitfld.long 0x00 1. "VDD_LVD_ACT_EN,VDD5v LVD detect control bit under active mode" "0,1"
newline
bitfld.long 0x00 0. "VDD_LVD_LP_EN,VDD5v LVD detect control bit under low power mode" "0,1"
group.long 0x14++0x03
line.long 0x00 "PMU_LDO_EN_CFG,PMU LDO enable configure register(PMU_LDO_EN_CFG)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,reserve"
bitfld.long 0x00 6. "LDO_FLASH_LPEN,LDO-flash low drive strength mode enable under stop mode" "0,1"
bitfld.long 0x00 5. "LDO_CLOCK_LPEN,LDO-clock low drive strength mode enable under stop mode" "0,1"
bitfld.long 0x00 4. "LDO_CORE_LPEN,LDO-core low drive strength enable uner stop mode" "0,1"
newline
bitfld.long 0x00 3. "RSVD_3,reserve" "0,1"
bitfld.long 0x00 2. "LDO_FLASH_EN,LDO-flash regulator enable control" "0,1"
bitfld.long 0x00 1. "LDO_CLOCK_EN,LDO-clock regulator enable control" "0,1"
bitfld.long 0x00 0. "LDO_CORE_EN,LDO-core regulator enable control" "0,1"
group.long 0x18++0x03
line.long 0x00 "PMU_LDO_LVD_STATUS,PMU LDO LVD status register(PMU_LDO_LVD_STATUS)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,reserve"
bitfld.long 0x00 4. "LVD_AOA_FLAG,always-on analog LDO LVD flag" "0,1"
bitfld.long 0x00 3. "RSVD_3,reserve" "0,1"
bitfld.long 0x00 2. "LVD_FLASH_FLAG,LDO flash LVD flag" "0,1"
newline
bitfld.long 0x00 1. "LVD_CLOCK_FLAG,LDO clock LVD flag" "0,1"
bitfld.long 0x00 0. "LVD_CORE_FLAG,LDO core LVD flag" "0,1"
group.long 0x1C++0x03
line.long 0x00 "PMU_LDO_LVD_CFG,PMU LDO LVD configure register(PMU_LDO_LVD_CFG)"
hexmask.long.tbyte 0x00 15.--31. 1. "RSVD_31_15,reserve"
bitfld.long 0x00 14. "LP_AOA_LVDE,PMU always-on LDO-aoa LVD detect control under low power mode" "0,1"
bitfld.long 0x00 12.--13. "RSVD_13_12,reserve" "0,1,2,3"
bitfld.long 0x00 11. "LP_CLOCK_LVDE,PMU LDO-clock LVD detect control under low power mode" "0,1"
newline
bitfld.long 0x00 10. "LP_CORE_LVDE,PMU LDO-core LVD detect control under low power mode" "0,1"
bitfld.long 0x00 9. "ACT_AOA_LVDE,PMU LDO-aoa LVD detect control under active mode" "0,1"
bitfld.long 0x00 7.--8. "RSVD_8_7,reserve" "0,1,2,3"
bitfld.long 0x00 6. "ACT_CLOCK_LVDE,PMU LDO-clock LVD detect control under active mode" "0,1"
newline
bitfld.long 0x00 5. "ACT_CORE_LVDE,PMU LDO-core LVD detect control under active mode" "0,1"
bitfld.long 0x00 4. "LVD_AOA_RE,PMU LDO-aoa LVD reset enable control" "0,1"
bitfld.long 0x00 3. "RSVD_3,reserve" "0,1"
bitfld.long 0x00 2. "LVD_FLASH_RE,PMU LDO-flash LVD reset enable control" "0,1"
newline
bitfld.long 0x00 1. "LVD_CLOCK_RE,PMU LDO-clock LVD reset enable control" "0,1"
bitfld.long 0x00 0. "LVD_CORE_RE,PMU LDO-core LVD reset enable control" "0,1"
group.long 0x20++0x03
line.long 0x00 "PMU_LDO_LVD_HYST_DLY,PMU LDO LVD delay configure register(PMU_LVD_HYST_DLY)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,reserve"
bitfld.long 0x00 3. "AOA_LVD_HYST_DLY_SEL,aoa-lvd_hyst select" "0,1"
bitfld.long 0x00 2. "FLASH_LVD_HYST_DLY_SEL,flash-lvd_hyst select" "0,1"
bitfld.long 0x00 1. "CLK_LVD_HYST_DLY_SEL,clk-lvd_hyst select" "0,1"
newline
bitfld.long 0x00 0. "CORE_LVD_HYST_DLY_SEL,core-lvd_hyst select" "0,1"
group.long 0x24++0x03
line.long 0x00 "PMU_HS_TRIM_DLY_CNT,PMU reserve1 register (PMU_RESERVE1)"
hexmask.long.tbyte 0x00 13.--31. 1. "RSVD_31_13,reserve"
hexmask.long.word 0x00 0.--12. 1. "HS_TRIM_DLY_CNT,delay counter for switch between hsrun and run"
group.long 0x28++0x03
line.long 0x00 "PMU_RESERVE2,PMU reserve2 register (PMU_RESERVE2)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,reserve"
group.long 0x2C++0x03
line.long 0x00 "PMU_LOCK_TEST,reserve for user doest not suggest user write this regsiter though no hardfault during write access"
bitfld.long 0x00 31. "LOCK_TEST,PMU LOCK test protection bit" "0,1"
hexmask.long 0x00 0.--30. 1. "RSVD_30_0,reserve"
group.long 0x30++0x03
line.long 0x00 "PMU_TEST_REQPIN_CFG,PMU request pin observe register(PMU_TEST_REQPIN)"
bitfld.long 0x00 30.--31. "RSVD_31_30,reserve" "0,1,2,3"
bitfld.long 0x00 29. "REQ_PORT_EN,Request pin port enable control" "0,1"
hexmask.long 0x00 4.--28. 1. "REQ_MUX_OUT_EN,Request pin mux output"
bitfld.long 0x00 2.--3. "OVERIDE,Request pin override enable" "0,1,2,3"
newline
bitfld.long 0x00 1. "POLARITY,Request pin polarity control" "0,1"
bitfld.long 0x00 0. "OE,Request pin output enable" "0,1"
group.long 0x34++0x03
line.long 0x00 "PMU_TEST_BG_TRIM,PMU test bangap trim register(PMU_TEST_BG_TRIM)"
hexmask.long.tbyte 0x00 13.--31. 1. "RSVD_31_13,reserve"
bitfld.long 0x00 8.--12. "BG_ITRIM,BandGap current reference trim" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "RSVD_7,reserve" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "BG_TC_TRIM,Bandgap temperature trim"
group.long 0x38++0x03
line.long 0x00 "PMU_TEST_LVW_VDD5V_TRIM,PMU test LVW VDD5V trim register(PMU_TEST_LVW_VDD5V_TRIM)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,reserve"
bitfld.long 0x00 0.--1. "LVW_VDD5V_TRIM,VDD5v LVW trim bits" "0,1,2,3"
group.long 0x3C++0x03
line.long 0x00 "PMU_TEST_CORE_TRIM,PMU test CORE trim register(PMU_TEST_CORE_TRIM)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,reserve"
hexmask.long.byte 0x00 0.--6. 1. "LDO_CORE_TRIM,LDO CORE trim bits"
group.long 0x40++0x03
line.long 0x00 "PMU_TEST_AOD_TRIM,PMU test AOD trim register(PMU_TEST_AOD_TRIM)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,reserve"
hexmask.long.byte 0x00 0.--6. 1. "LDO_AOD_TRIM,LDO-aod trim bits"
group.long 0x44++0x03
line.long 0x00 "PMU_TEST_AOA_TRIM,PMU test AOA trim register(PMU_TEST_AOA_TRIM)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,reserve"
hexmask.long.byte 0x00 0.--6. 1. "LDO_AOA_TRIM,LDO-aoa trim bits"
group.long 0x48++0x03
line.long 0x00 "PMU_TEST_FLASH_TRIM,PMU test FLASH trim register(PMU_TEST_FLASH_TRIM)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,reserve"
hexmask.long.byte 0x00 0.--6. 1. "LDO_FLASH_TRIM,LDO-flash trim bits"
group.long 0x4C++0x03
line.long 0x00 "PMU_TEST_CLOCK_TRIM,PMU test CLOCK trim register(PMU_TEST_CLOCK_TRIM)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,reserve"
hexmask.long.byte 0x00 0.--6. 1. "LDO_CLOCK_TRIM,LDO-clock trim bits"
group.long 0x50++0x03
line.long 0x00 "PMU_TEST_REF1V_TRIM,PMU test REF1V trim regsiter(PMU_TEST_REF1V_TRIM)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,reserve"
bitfld.long 0x00 0.--5. "REF1V_TRIM,Bandgap reference 1v trim bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x54++0x03
line.long 0x00 "PMU_TEST_REF1V_AOA_TRIM,PMU test AOA REF1V trim register(PMU_TEST_REF1V_AOA_TRIM)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,reserve"
bitfld.long 0x00 0.--5. "REF1V_AOA_TRIM,LDO-aoa reference 1V trim" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x58++0x03
line.long 0x00 "PMU_TEST_REF1V_CORE_TRIM,PMU test CORE REF1V trim register(PMU_TEST_REF1V_CORE_TRIM)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,reserve"
bitfld.long 0x00 0.--5. "REF1V_CORE_TRIM,LDO-core reference 1V trim" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x5C++0x03
line.long 0x00 "PMU_TEST_REF1V_FLASH_TRIM,PMU test FLASH REF1V trim register(PMU_TEST_REF1V_FLASH_TRIM)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,reserve"
bitfld.long 0x00 0.--5. "REFV1_FLASH_TRIM,LDO-flash reference 1V trim" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x60++0x03
line.long 0x00 "PMU_TEST_REF1V_CLOCK_TRIM,PMU test CLOCK REF1V trim register(PMU_TEST_REF1V_CLOCK_TRIM)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,reserve"
bitfld.long 0x00 0.--5. "REF1V_CLOCK_TRIM,LDO-clock reference 1V trim" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x64++0x03
line.long 0x00 "PMU_TEST_HV_CFG,PMU test high voltage configure register(PMU_TEST_HV_CFG)"
hexmask.long.tbyte 0x00 10.--31. 1. "RSVD_31_10,reserve"
bitfld.long 0x00 9. "AOA_2X_SEL,ldo-aoa 2x select" "0,1"
bitfld.long 0x00 8. "AOA_1P5X_SEL,ldo-aoa 1p5x select" "0,1"
bitfld.long 0x00 7. "AOD_2X_SEL,ldo-aod 2x select" "0,1"
newline
bitfld.long 0x00 6. "AOD_1P5X_SEL,ldo-aod 1p5x select" "0,1"
bitfld.long 0x00 5. "FLASH_2X_SEL,ldo-flash 2x select" "0,1"
bitfld.long 0x00 4. "FLASH_1P5X_SEL,ldo-flash 1p5x select" "0,1"
bitfld.long 0x00 3. "CLK_2X_SEL,ldo-clock 2x select" "0,1"
newline
bitfld.long 0x00 2. "CLK_1P5X_SEL,ldo-clock 1p5x select" "0,1"
bitfld.long 0x00 1. "CORE_2X_SEL,ldo-core 2x select" "0,1"
bitfld.long 0x00 0. "CORE_1P5X_SEL,ldo-core 1p5x select" "0,1"
group.long 0x68++0x03
line.long 0x00 "PMU_LDO_CLAMP_CFG,PMU LDO clamp configure register(PMU_LDO_CLAMP_CFG)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,reserve"
bitfld.long 0x00 4. "LDO_AOA_CLAMP_EN,ldo-aoa clamp enable" "0,1"
bitfld.long 0x00 3. "LDO_AOD_CLAMP_EN,ldo-aod clamp enable" "0,1"
bitfld.long 0x00 2. "LDO_FLASH_CLAMP_EN,ldo-flash clamp enable" "0,1"
newline
bitfld.long 0x00 1. "LDO_CLOCK_CLAMP_EN,ldo-clock clamp enable" "0,1"
bitfld.long 0x00 0. "LDO_CORE_CLAMP_EN,ldo-core clamp enable" "0,1"
tree.end
tree "PORT"
base ad:0x40049000
rgroup.long 0x00++0x03
line.long 0x00 "PORTA_VERID,Port Version Number(PORTA_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number"
hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number"
hexmask.long.word 0x00 0.--15. 1. "FEATURE,Module Identification Number"
rgroup.long 0x04++0x03
line.long 0x00 "PORTA_PARAM,PORT Parameter Register(PORTA_PARAM)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x08++0x03
line.long 0x00 "PORTA_GLBDAT,Global Pin Data Register(PORTA_GLBDAT)"
hexmask.long 0x00 0.--31. 1. "GPWD,Global Pin Write Data"
wgroup.long 0x0C++0x03
line.long 0x00 "PORTA_GLBCTL,Global Pin Control Register(PORTA_GLBCTL)"
hexmask.long 0x00 0.--31. 1. "GPWE,Global Pin Write Enable"
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x10)++0x03
line.long 0x00 "PORTA_PCRn$1,Pin Control Register(PORTA_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x50)++0x03
line.long 0x00 "PORTA_PCRn$1,Pin Control Register(PORTA_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
group.long 0x90++0x03
line.long 0x00 "PORTA_IRQFLG,Interrupt Status Flag Register (PORTA_IRQFLG)"
hexmask.long 0x00 0.--31. 1. "ISF,Interrupt Status Flag"
rgroup.long 0x1000++0x03
line.long 0x00 "PORTB_VERID,Port Version Number(PORTB_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number"
hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number"
hexmask.long.word 0x00 0.--15. 1. "FEATURE,Module Identification Number"
rgroup.long 0x1004++0x03
line.long 0x00 "PORTB_PARAM,PORT Parameter Register(PORTB_PARAM)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x1008++0x03
line.long 0x00 "PORTB_GLBDAT,Global Pin Data Register(PORTB_GLBDAT)"
hexmask.long 0x00 0.--31. 1. "GPWD,Global Pin Write Data"
wgroup.long 0x100C++0x03
line.long 0x00 "PORTB_GLBCTL,Global Pin Control Register(PORTB_GLBCTL)"
hexmask.long 0x00 0.--31. 1. "GPWE,Global Pin Write Enable"
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x1010)++0x03
line.long 0x00 "PORTB_PCRn$1,Pin Control Register(PORTB_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x1050)++0x03
line.long 0x00 "PORTB_PCRn$1,Pin Control Register(PORTB_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
group.long 0x1090++0x03
line.long 0x00 "PORTB_IRQFLG,Interrupt Status Flag Register (PORTB_IRQFLG)"
hexmask.long 0x00 0.--31. 1. "ISF,Interrupt Status Flag"
rgroup.long 0x2000++0x03
line.long 0x00 "PORTC_VERID,Port Version Number(PORTC_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number"
hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number"
hexmask.long.word 0x00 0.--15. 1. "FEATURE,Module Identification Number"
rgroup.long 0x2004++0x03
line.long 0x00 "PORTC_PARAM,PORT Parameter Register(PORTC_PARAM)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x2008++0x03
line.long 0x00 "PORTC_GLBDAT,Global Pin Data Register(PORTC_GLBDAT)"
hexmask.long 0x00 0.--31. 1. "GPWD,Global Pin Write Data"
wgroup.long 0x200C++0x03
line.long 0x00 "PORTC_GLBCTL,Global Pin Control Register(PORTC_GLBCTL)"
hexmask.long 0x00 0.--31. 1. "GPWE,Global Pin Write Enable"
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x2010)++0x03
line.long 0x00 "PORTC_PCRn$1,Pin Control Register(PORTC_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x2050)++0x03
line.long 0x00 "PORTC_PCRn$1,Pin Control Register(PORTC_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
group.long 0x2090++0x03
line.long 0x00 "PORTC_IRQFLG,Interrupt Status Flag Register (PORTC_IRQFLG)"
hexmask.long 0x00 0.--31. 1. "ISF,Interrupt Status Flag"
rgroup.long 0x7000++0x03
line.long 0x00 "PORTD_VERID,Port Version Number(PORTD_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number"
hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number"
hexmask.long.word 0x00 0.--15. 1. "FEATURE,Module Identification Number"
rgroup.long 0x7004++0x03
line.long 0x00 "PORTD_PARAM,PORT Parameter Register(PORTD_PARAM)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x7008++0x03
line.long 0x00 "PORTD_GLBDAT,Global Pin Data Register(PORTD_GLBDAT)"
hexmask.long 0x00 0.--31. 1. "GPWD,Global Pin Write Data"
wgroup.long 0x700C++0x03
line.long 0x00 "PORTD_GLBCTL,Global Pin Control Register(PORTD_GLBCTL)"
hexmask.long 0x00 0.--31. 1. "GPWE,Global Pin Write Enable"
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x7010)++0x03
line.long 0x00 "PORTD_PCRn$1,Pin Control Register(PORTD_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x7050)++0x03
line.long 0x00 "PORTD_PCRn$1,Pin Control Register(PORTD_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
group.long 0x7090++0x03
line.long 0x00 "PORTD_IRQFLG,Interrupt Status Flag Register (PORTD_IRQFLG)"
hexmask.long 0x00 0.--31. 1. "ISF,Interrupt Status Flag"
rgroup.long 0x8000++0x03
line.long 0x00 "PORTE_VERID,Port Version Number(PORTE_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number"
hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number"
hexmask.long.word 0x00 0.--15. 1. "FEATURE,Module Identification Number"
rgroup.long 0x8004++0x03
line.long 0x00 "PORTE_PARAM,PORT Parameter Register(PORTE_PARAM)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,This field is reserved"
group.long 0x8008++0x03
line.long 0x00 "PORTE_GLBDAT,Global Pin Data Register(PORTE_GLBDAT)"
hexmask.long 0x00 0.--31. 1. "GPWD,Global Pin Write Data"
wgroup.long 0x800C++0x03
line.long 0x00 "PORTE_GLBCTL,Global Pin Control Register(PORTE_GLBCTL)"
hexmask.long 0x00 0.--31. 1. "GPWE,Global Pin Write Enable"
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x8010)++0x03
line.long 0x00 "PORTE_PCRn$1,Pin Control Register(PORTE_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x8050)++0x03
line.long 0x00 "PORTE_PCRn$1,Pin Control Register(PORTE_PCRn)"
bitfld.long 0x00 31. "FLTEN,filter enable" "0,1"
bitfld.long 0x00 29.--30. "RSVD_30_29,This field is reserved" "0,1,2,3"
bitfld.long 0x00 24.--28. "FLT,filter configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "ISF,Interrupt Status Flag" "0,1"
bitfld.long 0x00 20.--22. "RSVD_22_20,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "LK,Lock Register" "0,1"
bitfld.long 0x00 11.--14. "RSVD_14_11,This field is reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "MUX,Pin Mux Control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "RSVD_7,This field is reserved" "0,1"
bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0,1"
bitfld.long 0x00 5. "ODE,Open Drain Enable" "0,1"
bitfld.long 0x00 4. "PFE,Passive Filter Enable" "0,1"
bitfld.long 0x00 3. "SRE,Slew Rate Enable" "0,1"
bitfld.long 0x00 2. "RSVD_2,This field is reserved" "0,1"
bitfld.long 0x00 1. "PE,Pull Enable" "0,1"
bitfld.long 0x00 0. "PS,Pull Select" "0,1"
repeat.end
group.long 0x8090++0x03
line.long 0x00 "PORTE_IRQFLG,Interrupt Status Flag Register (PORTE_IRQFLG)"
hexmask.long 0x00 0.--31. 1. "ISF,Interrupt Status Flag"
tree.end
tree "REGFILE"
base ad:0x4007C000
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x00)++0x03
line.long 0x00 "REGFILE_REGn$1,register file register"
hexmask.long 0x00 0.--31. 1. "DATA,DATA field"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x40)++0x03
line.long 0x00 "REGFILE_REGn$1,register file register"
hexmask.long 0x00 0.--31. 1. "DATA,DATA field"
repeat.end
tree.end
tree "RTC (Real-time Counter)"
base ad:0x40079000
group.long 0x00++0x03
line.long 0x00 "RTC_CSR,RTC control and status register (RTC_CSR)"
hexmask.long.tbyte 0x00 14.--31. 1. "RSVD_31_14,reserved"
bitfld.long 0x00 13. "PERIODIC_MATCH_FLG,RTC perriodic counter match flag" "0,1"
bitfld.long 0x00 12. "PERIODIC_CNT_EN,RTC periodic counter enable" "0,1"
bitfld.long 0x00 11. "SECONDS_INT_FLAG,seconds interrupt flag" "0,1"
bitfld.long 0x00 10. "EXTAL_32K_EN,extal 32K enable bit" "0,1"
newline
bitfld.long 0x00 9. "OSC_RDY,OSC32K ready" "0,1"
bitfld.long 0x00 8. "ALARM_MATCHF,RTC alarm match flag" "0,1"
bitfld.long 0x00 7. "OVF,RTC overflow flag" "0,1"
bitfld.long 0x00 6. "COUNT_EN,RTC timer counter enable" "0,1"
bitfld.long 0x00 5. "SW_RST,software reset" "0,1"
newline
bitfld.long 0x00 4. "SUP_EN,supervisor mode enable" "0,1"
bitfld.long 0x00 3. "CLKOUT_PIN_EN,RTC output clock to pin output enable" "0,1"
bitfld.long 0x00 2. "CLKOUT_SEL,RTC output clock to pin output enable" "0,1"
bitfld.long 0x00 1. "CNT_CLK_SEL,RTC one second counter clock source select bit" "0,1"
bitfld.long 0x00 0. "CRYSTAL_EN,internal 32K crystal enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "RTC_IER,RTC interrupt enable register(RTC_IER)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,reserved"
bitfld.long 0x00 6. "PERIODIC_IE,RTC periodic timer interrupt enable" "0,1"
bitfld.long 0x00 5. "SECONDS_IE,seconds interrut enable" "0,1"
bitfld.long 0x00 4. "ALARM_IE,RTC timer alarm match interrupt enable" "0,1"
bitfld.long 0x00 3. "OVFLOW_IE,RTC overflow interrupt enable" "0,1"
newline
bitfld.long 0x00 0.--2. "SECOND_INT_MUX_SEL,seconds interrupt mux selection" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "RTC_ALARM_CNTR,RTC alarm counter register(RTC_ALARM_CNTR)"
hexmask.long 0x00 0.--31. 1. "ALARM_CNT,alarm counter value"
group.long 0x0C++0x03
line.long 0x00 "RTC_ONE_SECOND_CNTR,RTC one second counter register"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,reserved"
hexmask.long.word 0x00 0.--15. 1. "ONE_SECOND_CNT,one seconds counter value"
group.long 0x10++0x03
line.long 0x00 "RTC_MATCH_CNTR,RTC match counter register(RTC_MATCH_CNTR)"
hexmask.long 0x00 0.--31. 1. "MATCH_CNT,Reserved"
group.long 0x14++0x03
line.long 0x00 "RTC_COMPENSATIONR,RTC compensation register(RTC_COMPENSATIONR)"
hexmask.long.byte 0x00 24.--31. 1. "CDLY,current compensation delay value"
hexmask.long.byte 0x00 16.--23. 1. "CCOMP_CNT,current compensation counter value"
hexmask.long.byte 0x00 8.--15. 1. "DLY,compensation delay value"
bitfld.long 0x00 7. "COMP_DIRECTION,frequency compensation direction" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "COMP_CNT,compensation counter value"
group.long 0x18++0x03
line.long 0x00 "RTC_LOCKR,RTC lock register (RTC_LOCKR)"
bitfld.long 0x00 31. "LOCK,lock bit" "0,1"
hexmask.long 0x00 0.--30. 1. "RSVD_30_0,reserved"
group.long 0x1C++0x03
line.long 0x00 "RTC_VERID,RTC version ID(RTC_VERID)"
hexmask.long 0x00 0.--31. 1. "VERID,version ID"
group.long 0x20++0x03
line.long 0x00 "RTC_PERIODIC_TMR_CNT,RTC periodic timer counter"
hexmask.long 0x00 0.--31. 1. "PERIODIC_TMR_CNT,periodic timer counter"
group.long 0x24++0x03
line.long 0x00 "RTC_PERIODIC_TMR_MATCH_CNT,RTC periodic timer match counter"
hexmask.long 0x00 0.--31. 1. "PERIODIC_MATCH_CNT,periodic timer match counter"
tree.end
tree "SCC"
base ad:0x40064000
rgroup.long 0x00++0x03
line.long 0x00 "SCC_VERID,System Clock Control Version Idenfication(SCC_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
hexmask.long.byte 0x00 16.--23. 1. "MAJOR,Major version"
hexmask.long.byte 0x00 8.--15. 1. "MINOR,Minor version"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
rgroup.long 0x04++0x03
line.long 0x00 "SCC_PARAM,System Clock Control Parameter(SCC_PARAM)"
bitfld.long 0x00 31. "RSVD_31,Reserved" "0,1"
bitfld.long 0x00 28.--30. "DIVPRES,Divider Present" "0,1,2,3,4,5,6,7"
hexmask.long.tbyte 0x00 5.--27. 1. "RSVD_27_5,Reserved"
bitfld.long 0x00 0.--4. "CLKSPRES,Clock Source Present" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x08++0x03
line.long 0x00 "SCC_CST,System Clock Control Clock Status Registers(SCC_CST)"
hexmask.long.word 0x00 19.--31. 1. "RSVD_31_19,Reserved"
bitfld.long 0x00 16.--18. "SCS,System Clock Source" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "DIVCORE,Core Clock Divide Ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "DIVBUS,Bus Clock Divide Ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "DIVSLOW,Slow Clock Divide Ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x0C++0x03
line.long 0x00 "SCC_CFG,System Clock Control Clock Configuration Registers(SCC_CFG)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
hexmask.long.word 0x00 19.--30. 1. "RSVD_30_19,Reserved"
bitfld.long 0x00 16.--18. "SCS,System Clock Source" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "DIVCORE,Core Clock Divide Ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "DIVBUS,Bus Clock Divide Ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "DIVSLOW,Slow Clock Divide Ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x10++0x03
line.long 0x00 "SCC_CLKOUTCFG,System Clock Control Clock Out Configuration Registers(SCC_CLKOUTCFG)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 16.--19. "CLKOUTSEL,SCC CLKOUT Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x14++0x03
line.long 0x00 "SCC_OSCCS,System Clock Control OSC Control Status Registers(SCC_OSCCS)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
hexmask.long.word 0x00 19.--30. 1. "RSVD_30_19,Reserved"
bitfld.long 0x00 18. "OSCLOC,OSC Loss Of Clock" "0,1"
bitfld.long 0x00 17. "OSCSELD,OSC is selected as system clock source" "0,1"
bitfld.long 0x00 16. "OSCRDY,OSC is ready for use" "0,1"
bitfld.long 0x00 11.--15. "RSVD_15_11,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10. "OSCCMRE,OSC Clock Monitor Reset Enabled" "0,1"
bitfld.long 0x00 9. "OSCCME,OSC Clock Monitor Enable" "0,1"
newline
bitfld.long 0x00 5.--8. "RSVD_8_5,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4. "OSCLOCINTEN,OSC loss of clock interrupt enable" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 1. "OSCSTOPEN,OSC Stop Mode Enable" "0,1"
bitfld.long 0x00 0. "OSCEN,OSC Enable" "0,1"
group.long 0x18++0x03
line.long 0x00 "SCC_OSCCFG,System Clock Control OSC Configuration Register(SCC_OSCCFG)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
hexmask.long.tbyte 0x00 10.--30. 1. "RSVD_30_10,Reserved"
bitfld.long 0x00 8.--9. "ITRIM,Current Trim" "0,1,2,3"
bitfld.long 0x00 3.--7. "RSVD_7_3,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 2. "HFREQ,High Frequency Mode" "0,1"
bitfld.long 0x00 1. "OLMEN,Open Loop Mode" "0,1"
bitfld.long 0x00 0. "EXCLKS,OSC External Clock Select" "0,1"
group.long 0x1C++0x03
line.long 0x00 "SCC_FIRCCS,System Clock Control FIRC Control Status Registers(SCC_FIRCCS)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
hexmask.long.word 0x00 19.--30. 1. "RSVD_30_19,Reserved"
bitfld.long 0x00 18. "FIRCLOC,FIRC Loss Of Clock" "0,1"
bitfld.long 0x00 17. "FIRCSELD,FIRC64M is selected as system clock source" "0,1"
bitfld.long 0x00 16. "FIRCRDY,FIRC64M is ready for use" "0,1"
bitfld.long 0x00 13.--15. "RSVD_15_13,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12. "FIRCTRIMEN,Enable FIRC64M trim update" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
newline
bitfld.long 0x00 10. "FIRCCMRE,FIRC Clock Monitor Reset Enabled" "0,1"
bitfld.long 0x00 9. "FIRCCME,FIRC Clock Monitor Enable" "0,1"
bitfld.long 0x00 5.--8. "RSVD_8_5,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4. "FIRCLOCINTEN,FIRC loss of clock interrupt enable" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 1. "FIRCSTOPEN,FIRC Stop Mode Enable" "0,1"
bitfld.long 0x00 0. "FIRCEN,FIRC Enable" "0,1"
group.long 0x20++0x03
line.long 0x00 "SCC_FIRCCFG,System Clock Control FIRC Configuration Register(SCC_FIRCCFG)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
hexmask.long 0x00 2.--30. 1. "RSVD_30_2,Reserved"
bitfld.long 0x00 0.--1. "FREQMS,Frequency Mode Select" "0,1,2,3"
group.long 0x24++0x03
line.long 0x00 "SCC_FIRCTRIM,System Clock Control FIRC Trim Register(SCC_FIRCTRIM)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 0.--5. "TRIM,FRIC64M Trim" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x28++0x03
line.long 0x00 "SCC_SPLLCS,System Clock Control SPLL Control Status Registers(SCC_SPLLCS)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
hexmask.long.word 0x00 19.--30. 1. "RSVD_30_19,Reserved"
bitfld.long 0x00 18. "LOL,SPLL Loss Of Lock" "0,1"
bitfld.long 0x00 17. "SPLLSELD,SPLL is selected as system clock source" "0,1"
bitfld.long 0x00 16. "SPLLRDY,SPLL is ready for use" "0,1"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 12.--13. "LOCKWIN,SPLL phase lock window" "0,1,2,3"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
newline
bitfld.long 0x00 10. "LOLRESTEN,Loss of lock reset enable" "0,1"
bitfld.long 0x00 9. "LOLDEN,Loss of lock detector enable" "0,1"
bitfld.long 0x00 5.--8. "RSVD_8_5,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4. "LOLINTEN,Loss of lock interrupt request enable" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 1. "SPLLSTOPEN,SPLL Stop Mode Enable" "0,1"
bitfld.long 0x00 0. "SPLLEN,SPLL Enable" "0,1"
group.long 0x2C++0x03
line.long 0x00 "SCC_SPLLCFG1,System Clock Control SPLL Configuration Register 1(SCC_SPLLCFG1)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
hexmask.long.word 0x00 19.--30. 1. "RSVD_30_19,Reserved"
bitfld.long 0x00 16.--18. "POSTDIV,Post divider" "0,1,2,3,4,5,6,7"
hexmask.long.byte 0x00 8.--15. 1. "MULT,SPLL multiplier"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "REFCKS,Reference clock select" "0,1"
bitfld.long 0x00 4. "FBPRESEN,Feedback pre-scaler enable" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 0.--1. "PREDIV,Pre-divider" "0,1,2,3"
group.long 0x30++0x03
line.long 0x00 "SCC_SPLLCFG2,System Clock Control SPLL Configuration Register 2(SCC_SPLLCFG2)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
bitfld.long 0x00 25.--30. "RSVD_30_25,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24. "LDOODEN,LDO over drive enable" "0,1"
hexmask.long.byte 0x00 16.--23. 1. "RSVD_23_16,Reserved"
bitfld.long 0x00 15. "RSVD_15,Reserved" "0,1"
bitfld.long 0x00 14. "CPISEL,pll cp bias option" "0,1"
bitfld.long 0x00 13. "PFDDIEN,dither enable" "0,1"
bitfld.long 0x00 12. "VCODIV,pll VCO /2 option" "0,1"
newline
bitfld.long 0x00 11. "KVCO,kvco gain setting" "0,1"
bitfld.long 0x00 8.--10. "RES,LPF resistor setting" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--7. "CAP,LPF cap setting" "0,1,2,3"
bitfld.long 0x00 4.--5. "CS,LPF cap 2nd pole setting" "0,1,2,3"
bitfld.long 0x00 2.--3. "CPIC,charge pump integral path current setting" "0,1,2,3"
bitfld.long 0x00 0.--1. "CPIR,charge pump proportional path current setting" "0,1,2,3"
group.long 0x34++0x03
line.long 0x00 "SCC_SPLLTEST,System Clock Control SPLL Test Register 2(SCC_SPLLTEST)"
bitfld.long 0x00 31. "LOCK,Lock register access" "0,1"
hexmask.long.tbyte 0x00 11.--30. 1. "RSVD_30_11,Reserved"
bitfld.long 0x00 9.--10. "VTSTMUX,pll voltage test mux slection" "0,1,2,3"
bitfld.long 0x00 8. "VTSTEN,pll voltage test enable" "0,1"
bitfld.long 0x00 3.--7. "RSVD_7_3,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--2. "CKTSTMUX,pll clock test mux slection" "0,1,2,3"
bitfld.long 0x00 0. "CKTSTEN,pll clock test enable" "0,1"
tree.end
tree "SCM"
base ad:0x40048000
group.long 0x00++0x03
line.long 0x00 "SCM_CHIPCTL,Chip Control register (SCM_CHIPCTL)"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
bitfld.long 0x00 11. "CLKOUTEN,CLKOUT enable" "0,1"
bitfld.long 0x00 8.--10. "CLKOUTDIV,CLKOUT Divide Ratio" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 4.--5. "CLKOUTSEL,CLKOUT Source selection" "0,1,2,3"
newline
bitfld.long 0x00 0.--3. "RSVD_3_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x04++0x03
line.long 0x00 "SCM_MISCCTL1,Misc Control register 1(SCM_MISCCTL1)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 29. "FPU_DENORMALIN_INT_EN,fpu denormain interrupt enable" "0,1"
bitfld.long 0x00 28. "FPU_DIVZERO_INT_EN,fpu divzero interrupt enable" "0,1"
bitfld.long 0x00 27. "FPU_INVALIDOP_INT_EN,fpu invalidop interrupt enable" "0,1"
bitfld.long 0x00 26. "FPU_UNDERFLOW_INT_EN,fpu underflow interrupt enable" "0,1"
newline
bitfld.long 0x00 25. "FPU_OVERFLOW_INT_EN,fpu overflow interrupt enable" "0,1"
bitfld.long 0x00 24. "FPU_INEXACT_INT_EN,fpu inexat interrupt enable" "0,1"
bitfld.long 0x00 23. "RSVD_23,Reserved" "0,1"
bitfld.long 0x00 22. "TRACE_CLK_EN,trace clock output enable" "0,1"
bitfld.long 0x00 17.--21. "TRACE_CLK_DIV,trace clock divider" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 16. "CCACHE_BE_INT_EN,cache bit error interrupt enable" "0,1"
bitfld.long 0x00 15. "CCACHE_WBE_INT_EN,cache write buffer error interrupt enable" "0,1"
bitfld.long 0x00 14. "CACHE_DIS,cache disable control bit" "0,1"
bitfld.long 0x00 13. "CCACHE_PARITY_FAULT_EN,cache parity fault enable" "0,1"
bitfld.long 0x00 12. "CCACHE_PARITY_MISS_EN,cache parity miss enable" "0,1"
newline
bitfld.long 0x00 11. "CCACHE_CLR,active high clears cache" "0,1"
bitfld.long 0x00 10. "RSVD_10,force no cache allocation(reserved only for test)" "0,1"
bitfld.long 0x00 9. "CCACHE_LIM_WB,write buffer limit" "0,1"
bitfld.long 0x00 8. "CCACHE_DIS_WB,write buffer disable" "0,1"
bitfld.long 0x00 7. "BOOT_FROM_SRAMU,Enable boot from sramu" "0,1"
newline
bitfld.long 0x00 6. "XBAR_ROUND_ROBIN,Software Trigger to TMU" "0,1"
bitfld.long 0x00 5. "SRAMU_READ_BUFF_EN,Software Trigger to TMU" "0,1"
bitfld.long 0x00 4. "SRAML_READ_BUFF_EN,Software Trigger to TMU" "0,1"
bitfld.long 0x00 0.--3. "SWTRIG,Software Trigger to TMU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x28++0x03
line.long 0x00 "SCM_MISCCTL2,Misc Control register 2(SCM_MISCCTL2)"
bitfld.long 0x00 28.--31. "RSVD_31_28,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "ADC1_CH15_SEL,ADC1 channel 15 mux select" "0,1"
bitfld.long 0x00 26. "ADC1_CH14_SEL,ADC1 channel 14 mux select" "0,1"
bitfld.long 0x00 25. "ADC0_CH9_SEL,ADC0 channel 9 mux select" "0,1"
bitfld.long 0x00 24. "ADC0_CH8_SEL,ADC0 channel 8 mux select" "0,1"
newline
bitfld.long 0x00 20.--23. "RSVD_23_20,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 18.--19. "TIM3_TCLK_SEL,TIM3 external input clock select" "0,1,2,3"
bitfld.long 0x00 16.--17. "TIM2_TCLK_SEL,TIM2 external input clock select" "0,1,2,3"
bitfld.long 0x00 14.--15. "TIM1_TCLK_SEL,TIM1 external input clock select" "0,1,2,3"
bitfld.long 0x00 12.--13. "TIM0_TCLK_SEL,TIM0 external input clock select" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MCPWM1_TCLK_SEL,MCPWM1 external input clock select" "0,1,2,3"
bitfld.long 0x00 8.--9. "MCPWM0_TCLK_SEL,MCPWM0 external input clock select" "0,1,2,3"
bitfld.long 0x00 3.--7. "RSVD_7_3,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--2. "ENET_PHY_INTF_SEL,ENET phy select" "0,1,2,3,4,5,6,7"
group.long 0x40++0x03
line.long 0x00 "SCM_MISCSTAT1,Misc Status register 1(SCM_MISCSTAT1)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 29. "FPU_DENORMALIN_FLAG,FPU denormalin flag" "0,1"
bitfld.long 0x00 28. "FPU_DIVZERO_FLAG,FPU divzero flag" "0,1"
bitfld.long 0x00 27. "FPU_INVALIDOP_FLAG,FPU invalid op flag" "0,1"
bitfld.long 0x00 26. "FPU_UNDERFLOW_FLAG,FPU under flow flag" "0,1"
newline
bitfld.long 0x00 25. "FPU_OVERFLOW_FLAG,FPU over flow flag" "0,1"
bitfld.long 0x00 24. "FPU_INEXACT_FLAG,FPU in exact flag" "0,1"
hexmask.long.byte 0x00 16.--23. 1. "CCACHE_BE_FLAG,cache bit error flag"
bitfld.long 0x00 15. "CCACHE_WBE_FLAG,cache write buffer error flag" "0,1"
hexmask.long.word 0x00 0.--14. 1. "RSVD_14_0,Reserved"
group.long 0x44++0x03
line.long 0x00 "SCM_MISCDATA1,Misc Data register 1(SCM_MISCDATA1)"
hexmask.long 0x00 0.--31. 1. "CACHE_BE_ADDR,Reserved"
group.long 0x48++0x03
line.long 0x00 "SCM_MISCDATA2,Misc Data register 2(SCM_MISCDATA2)"
hexmask.long 0x00 0.--31. 1. "CACHE_BE_DATA,Reserved"
rgroup.long 0x100++0x03
line.long 0x00 "SCM_CHIPOPT,Chip Option Register (SCM_CHIPOPT)"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,Reserved"
rgroup.long 0x104++0x03
line.long 0x00 "SCM_FLSCFG,Flash Configuration Register (SCM_FLSCFG)"
bitfld.long 0x00 28.--31. "DFSIZE,Data Flash Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "PFSIZE,Program Flash Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.tbyte 0x00 0.--23. 1. "RSVD_23_0,Reserved"
rgroup.long 0x108++0x03
line.long 0x00 "SCM_RAMCFG,RAM Configuration Register (SCM_RAMCFG)"
bitfld.long 0x00 28.--31. "RAMSIZE,SRAM Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.tbyte 0x00 4.--27. 1. "RSVD_27_4,Reserved"
bitfld.long 0x00 0.--3. "CACHESIZE,CACHE Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x10C++0x03
line.long 0x00 "SCM_RAMRMC1,RAM Read Margin Control Register 1(SCM_RAMRMC1)"
bitfld.long 0x00 29.--31. "RSVD_31_29,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 28. "SRAMU_RM_DIS,SRAMU read margin disable" "0,1"
bitfld.long 0x00 24.--27. "SRAMU_RM,SRAMU read margin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 13.--23. 1. "RSVD_23_13,Reserved"
bitfld.long 0x00 12. "SRAML_RM_DIS,SRAML read margin disable" "0,1"
newline
bitfld.long 0x00 8.--11. "SRAML_RM,SRAML read margin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
rgroup.long 0x110++0x03
line.long 0x00 "SCM_RAMRMC2,RAM Read Margin Control Register 2(SCM_RAMRMC2)"
hexmask.long.tbyte 0x00 13.--31. 1. "RSVD_31_13,Reserved"
bitfld.long 0x00 12. "CACHE_RME,CACHE read margin enable" "0,1"
bitfld.long 0x00 8.--11. "CACHE_RM,CACHE read margin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
rgroup.long 0x11C++0x03
line.long 0x00 "SCM_DEVID,System Device Identification Register (SCM_SDID)"
bitfld.long 0x00 27.--31. "PACKAGE_ID,Package ID load from IFR during reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.byte 0x00 20.--26. 1. "FEATURE_ID,Feature ID load from IFR during reset"
bitfld.long 0x00 16.--19. "REV_ID,Revision ID load from IFR during reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "FAMILY_ID,Family ID load from IFR during reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7.--11. "SUBFAMILY_ID,Sub family ID load from IFR during reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4.--6. "SERIES_ID,Series ID load from IFR during reset" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--3. "MEMSIZE_ID,Memory size ID load from IFR during reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x120++0x03
line.long 0x00 "SCM_UNIQUE0,Unique Identification Register 0 (SCM_UID0)"
hexmask.long 0x00 0.--31. 1. "UID_31_0,Reserved"
rgroup.long 0x124++0x03
line.long 0x00 "SCM_UNIQUE1,Unique Identification Register 1 (SCM_UID1)"
hexmask.long 0x00 0.--31. 1. "UID_63_32,Reserved"
rgroup.long 0x128++0x03
line.long 0x00 "SCM_UNIQUE2,Unique Identification Register 2 (SCM_UID2)"
hexmask.long 0x00 0.--31. 1. "UID_95_64,Reserved"
rgroup.long 0x12C++0x03
line.long 0x00 "SCM_UNIQUE3,Unique Identification Register 3 (SCM_UID3)"
hexmask.long 0x00 0.--31. 1. "UID_127_96,Reserved"
tree.end
tree "SERU"
base ad:0x4007F000
rgroup.long 0x00++0x03
line.long 0x00 "SERU_VERSION,Reserved"
hexmask.long 0x00 0.--31. 1. "VERSION,version"
rgroup.long 0x04++0x03
line.long 0x00 "SERU_PARAM,Reserved"
hexmask.long 0x00 0.--31. 1. "PARAM,parameter"
group.long 0x08++0x03
line.long 0x00 "SERU_CSR,Reserved"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,This field is reserved"
bitfld.long 0x00 8. "CFG_MODE,configure mode" "0,1"
bitfld.long 0x00 7. "FFI_EN,fake fault injection enable" "0,1"
bitfld.long 0x00 6. "EOUT1_IO_EN,EOUT1 to external pin" "0,1"
bitfld.long 0x00 5. "EOUT0_IO_EN,EOUT0 to external pin" "0,1"
bitfld.long 0x00 4. "EOUT_PS,EOUT Polarity Selection" "0,1"
bitfld.long 0x00 1.--3. "RSVD_3_1,This field is reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "CRPAR_INT_EN,register parity error int enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "SERU_INTF,Reserved"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,This field is reserved"
bitfld.long 0x00 0. "S_CRPAR_ERR,register parity error flag" "0,1"
group.long 0x10++0x03
line.long 0x00 "SERU_CFG_KEY,Reserved"
hexmask.long 0x00 0.--31. 1. "KEY,configure mode key"
group.long 0x14++0x03
line.long 0x00 "SERU_CH_FFI,Reserved"
hexmask.long 0x00 0.--31. 1. "CH_FFI,Fake fault injection"
group.long 0x18++0x03
line.long 0x00 "SERU_SWERR_GNT,Reserved"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,This field is reserved"
bitfld.long 0x00 2. "SWERR_CH2,software error generate" "0,1"
bitfld.long 0x00 1. "SWERR_CH1,software error generate" "0,1"
bitfld.long 0x00 0. "SWERR_CH0,software error generate" "0,1"
group.long 0x1C++0x03
line.long 0x00 "SERU_CH_FLAG,Reserved"
hexmask.long 0x00 0.--31. 1. "CH_FLAG,channel error flag"
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x20)++0x03
line.long 0x00 "SERU_CFG_CHn$1,Reserved"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,This field is reserved"
bitfld.long 0x00 8. "CH_FLAG,channel error flag" "0,1"
bitfld.long 0x00 6.--7. "CH_RESET_DLY,reset generation delay" "0,1,2,3"
bitfld.long 0x00 5. "CH_RESET_TYP,select RESET type" "0,1"
bitfld.long 0x00 4. "CH_RESET_CFG,enable RESET generation" "0,1"
bitfld.long 0x00 3. "CH_EOUT_CFG,enable EOUT report" "0,1"
bitfld.long 0x00 2. "CH_INT_TYP,enable INT type" "0,1"
bitfld.long 0x00 1. "CH_INT_CFG,enable INT generation" "0,1"
newline
bitfld.long 0x00 0. "CH_EN,enable channel" "0,1"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x60)++0x03
line.long 0x00 "SERU_CFG_CHn$1,Reserved"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,This field is reserved"
bitfld.long 0x00 8. "CH_FLAG,channel error flag" "0,1"
bitfld.long 0x00 6.--7. "CH_RESET_DLY,reset generation delay" "0,1,2,3"
bitfld.long 0x00 5. "CH_RESET_TYP,select RESET type" "0,1"
bitfld.long 0x00 4. "CH_RESET_CFG,enable RESET generation" "0,1"
bitfld.long 0x00 3. "CH_EOUT_CFG,enable EOUT report" "0,1"
bitfld.long 0x00 2. "CH_INT_TYP,enable INT type" "0,1"
bitfld.long 0x00 1. "CH_INT_CFG,enable INT generation" "0,1"
newline
bitfld.long 0x00 0. "CH_EN,enable channel" "0,1"
repeat.end
tree.end
tree "SMPU"
base ad:0x4000A000
rgroup.long 0x00++0x03
line.long 0x00 "SMPU_VERID,Version ID register(SMPU_VERID)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "NMRC,number of memory region configuration"
bitfld.long 0x00 4.--7. "NSP,number of slave ports" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "VERID,version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x04++0x03
line.long 0x00 "SMPU_CS,control and status register(SMPU_CS)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "GLBEN,global SMPU enable" "0,1"
bitfld.long 0x00 4.--7. "RSVD_7_4,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3. "S3ERR,slave port 3 error status" "0,1"
bitfld.long 0x00 2. "S2ERR,slave port 2 error status" "0,1"
bitfld.long 0x00 1. "S1ERR,slave port 1 error status" "0,1"
bitfld.long 0x00 0. "S0ERR,slave port 0 error status" "0,1"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
rgroup.long ($2+0x10)++0x03
line.long 0x00 "SMPU_Sn_EA$1,slave port n error address register(SMPU_Sn_EA)"
hexmask.long 0x00 0.--31. 1. "EADDR,slave port n error address"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
rgroup.long ($2+0x30)++0x03
line.long 0x00 "SMPU_Sn_ES$1,slave port n error status register(SMPU_Sn_ES)"
bitfld.long 0x00 31. "ERW,error read/write access" "0,1"
bitfld.long 0x00 30. "RSVD_30,Reserved" "0,1"
bitfld.long 0x00 29. "EUS,error user/supervisor access" "0,1"
bitfld.long 0x00 28. "EATTR,error instruction/data access" "0,1"
bitfld.long 0x00 24.--27. "EMN,error access master number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 16.--23. 1. "RSVD_23_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "EMRC,error detected by memory region configuration"
repeat.end
group.long 0x100++0x03
line.long 0x00 "SMPU_MRCn_W00,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x104++0x03
line.long 0x00 "SMPU_MRCn_W10,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x108++0x03
line.long 0x00 "SMPU_MRCn_W20,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x10C++0x03
line.long 0x00 "SMPU_MRCn_W30,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x110++0x03
line.long 0x00 "SMPU_MRCn_W01,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x114++0x03
line.long 0x00 "SMPU_MRCn_W11,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x118++0x03
line.long 0x00 "SMPU_MRCn_W21,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x11C++0x03
line.long 0x00 "SMPU_MRCn_W31,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x120++0x03
line.long 0x00 "SMPU_MRCn_W02,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x124++0x03
line.long 0x00 "SMPU_MRCn_W12,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x128++0x03
line.long 0x00 "SMPU_MRCn_W22,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x12C++0x03
line.long 0x00 "SMPU_MRCn_W32,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x130++0x03
line.long 0x00 "SMPU_MRCn_W03,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x134++0x03
line.long 0x00 "SMPU_MRCn_W13,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x138++0x03
line.long 0x00 "SMPU_MRCn_W23,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x13C++0x03
line.long 0x00 "SMPU_MRCn_W33,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x140++0x03
line.long 0x00 "SMPU_MRCn_W04,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x144++0x03
line.long 0x00 "SMPU_MRCn_W14,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x148++0x03
line.long 0x00 "SMPU_MRCn_W24,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x14C++0x03
line.long 0x00 "SMPU_MRCn_W34,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x150++0x03
line.long 0x00 "SMPU_MRCn_W05,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x154++0x03
line.long 0x00 "SMPU_MRCn_W15,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x158++0x03
line.long 0x00 "SMPU_MRCn_W25,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x15C++0x03
line.long 0x00 "SMPU_MRCn_W35,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x160++0x03
line.long 0x00 "SMPU_MRCn_W06,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x164++0x03
line.long 0x00 "SMPU_MRCn_W16,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x168++0x03
line.long 0x00 "SMPU_MRCn_W26,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x16C++0x03
line.long 0x00 "SMPU_MRCn_W36,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x170++0x03
line.long 0x00 "SMPU_MRCn_W07,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x174++0x03
line.long 0x00 "SMPU_MRCn_W17,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x178++0x03
line.long 0x00 "SMPU_MRCn_W27,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x17C++0x03
line.long 0x00 "SMPU_MRCn_W37,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x180++0x03
line.long 0x00 "SMPU_MRCn_W08,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x184++0x03
line.long 0x00 "SMPU_MRCn_W18,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x188++0x03
line.long 0x00 "SMPU_MRCn_W28,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x18C++0x03
line.long 0x00 "SMPU_MRCn_W38,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x190++0x03
line.long 0x00 "SMPU_MRCn_W09,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x194++0x03
line.long 0x00 "SMPU_MRCn_W19,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x198++0x03
line.long 0x00 "SMPU_MRCn_W29,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x19C++0x03
line.long 0x00 "SMPU_MRCn_W39,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x1A0++0x03
line.long 0x00 "SMPU_MRCn_W010,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1A4++0x03
line.long 0x00 "SMPU_MRCn_W110,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1A8++0x03
line.long 0x00 "SMPU_MRCn_W210,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x1AC++0x03
line.long 0x00 "SMPU_MRCn_W310,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x1B0++0x03
line.long 0x00 "SMPU_MRCn_W011,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1B4++0x03
line.long 0x00 "SMPU_MRCn_W111,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1B8++0x03
line.long 0x00 "SMPU_MRCn_W211,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x1BC++0x03
line.long 0x00 "SMPU_MRCn_W311,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x1C0++0x03
line.long 0x00 "SMPU_MRCn_W012,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1C4++0x03
line.long 0x00 "SMPU_MRCn_W112,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1C8++0x03
line.long 0x00 "SMPU_MRCn_W212,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x1CC++0x03
line.long 0x00 "SMPU_MRCn_W312,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x1D0++0x03
line.long 0x00 "SMPU_MRCn_W013,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1D4++0x03
line.long 0x00 "SMPU_MRCn_W113,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1D8++0x03
line.long 0x00 "SMPU_MRCn_W213,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x1DC++0x03
line.long 0x00 "SMPU_MRCn_W313,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x1E0++0x03
line.long 0x00 "SMPU_MRCn_W014,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1E4++0x03
line.long 0x00 "SMPU_MRCn_W114,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1E8++0x03
line.long 0x00 "SMPU_MRCn_W214,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x1EC++0x03
line.long 0x00 "SMPU_MRCn_W314,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
group.long 0x1F0++0x03
line.long 0x00 "SMPU_MRCn_W015,memory region n configuration word 0 register"
hexmask.long 0x00 5.--31. 1. "SADDR,memory region n configuration start address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1F4++0x03
line.long 0x00 "SMPU_MRCn_W115,memory region n configuration word 1 register"
hexmask.long 0x00 5.--31. 1. "EADDR,memory region n configuration end address"
bitfld.long 0x00 0.--4. "RSVD_4_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x1F8++0x03
line.long 0x00 "SMPU_MRCn_W215,memory region n configuration word 2 register"
hexmask.long.word 0x00 23.--31. 1. "RSVD_31_23,Reserved"
bitfld.long 0x00 21.--22. "M3SM,Bus master 3 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 20. "M3UR,Bus master 3 user mode read access control" "0,1"
bitfld.long 0x00 19. "M3UW,Bus master 3 user mode write access control" "0,1"
bitfld.long 0x00 18. "M3UX,Bus master 3 user mode execute access control" "0,1"
bitfld.long 0x00 17. "RSVD_17,Reserved" "0,1"
bitfld.long 0x00 15.--16. "M2SM,Bus master 2 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 14. "M2UR,Bus master 2 user mode read access control" "0,1"
newline
bitfld.long 0x00 13. "M2UW,Bus master 2 user mode write access control" "0,1"
bitfld.long 0x00 12. "M2UX,Bus master 2 user mode execute access control" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 9.--10. "M1SM,Bus master 1 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 8. "M1UR,Bus master 1 user mode read access control" "0,1"
bitfld.long 0x00 7. "M1UW,Bus master 1 user mode write access control" "0,1"
bitfld.long 0x00 6. "M1UX,Bus master 1 user mode execute access control" "0,1"
bitfld.long 0x00 5. "RSVD_5,Reserved" "0,1"
newline
bitfld.long 0x00 3.--4. "M0SM,Bus master 0 supervisor mode access control" "0,1,2,3"
bitfld.long 0x00 2. "M0UR,Bus master 0 user mode read access control" "0,1"
bitfld.long 0x00 1. "M0UW,Bus master 0 user mode write access control" "0,1"
bitfld.long 0x00 0. "M0UX,Bus master 0 user mode execute access control" "0,1"
group.long 0x1FC++0x03
line.long 0x00 "SMPU_MRCn_W315,memory region n configuration word 3 register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved and read as 0"
bitfld.long 0x00 16. "EN,memory region n configuration enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "RSVD_15_0,Reserved"
tree.end
tree "SPI"
tree "SPI0"
base ad:0x4002C000
group.long 0x00++0x03
line.long 0x00 "SPI0_SPI_CTRLR0,Control Register 0(SPI_CTRLR0)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,Reserved"
bitfld.long 0x00 24. "MHS,Microwire Handshaking" "0,1"
bitfld.long 0x00 23. "MDD,Microwire Control" "0,1"
bitfld.long 0x00 22. "MWMOD,Microwire Transfer Mode" "0,1"
bitfld.long 0x00 21. "MST_MODE,Master mode enable" "0,1"
bitfld.long 0x00 16.--20. "DFS_32,Data Frame Size in 32-bit mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--15. "CFS,Control Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "SRL,Shift Register Loop" "0,1"
newline
bitfld.long 0x00 10. "SLV_OE,Slave Output Enable" "0,1"
bitfld.long 0x00 8.--9. "TMOD,Transfer Mode" "0,1,2,3"
bitfld.long 0x00 7. "SCPOL,Serial Clock Polarity" "0,1"
bitfld.long 0x00 6. "SCPH,Serial Clock Phase" "0,1"
bitfld.long 0x00 0.--5. "RSVD_5_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x04++0x03
line.long 0x00 "SPI0_SPI_CTRLR1,Control Register 1(SPI_CTRLR1)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "NDF,Number of Data Frames"
group.long 0x08++0x03
line.long 0x00 "SPI0_SPI_SSENR,SPI Enable Register(SPI_SSENR)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 16.--17. "SER,Slave Select Enable Flag" "0,1,2,3"
hexmask.long.word 0x00 1.--15. 1. "RSVD_15_1,Reserved"
bitfld.long 0x00 0. "SPI_EN,SPI enable trigger" "0,1"
group.long 0x0C++0x03
line.long 0x00 "SPI0_SPI_BAUDR,Baud Rate Select Register(SPI_BAUDR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "SCKDV,SPI Clock Divider"
group.long 0x10++0x03
line.long 0x00 "SPI0_SPI_FTLR,FIFO Threshold Level Register(SPI_FTLR)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 16.--17. "RFT,Receive FIFO Threshold" "0,1,2,3"
hexmask.long.word 0x00 2.--15. 1. "RSVD_15_2,Reserved"
bitfld.long 0x00 0.--1. "TFT,Transmit FIFO Threshold" "0,1,2,3"
rgroup.long 0x14++0x03
line.long 0x00 "SPI0_SPI_FLR,FIFO Level Register(SPI_FLR)"
hexmask.long.word 0x00 19.--31. 1. "RSVD_31_19,Reserved"
bitfld.long 0x00 16.--18. "RXTFL,Receive FIFO Level" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 3.--15. 1. "RSVD_15_3,Reserved"
bitfld.long 0x00 0.--2. "TXTFL,Transmit FIFO Level" "0,1,2,3,4,5,6,7"
rgroup.long 0x18++0x03
line.long 0x00 "SPI0_SPI_SR,Status Register(SPI_SR)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 5. "TXE,Transmission Error" "0,1"
bitfld.long 0x00 4. "RFF,Receive FIFO Full" "0,1"
bitfld.long 0x00 3. "RFNE,Receive FIFO Not Empty" "0,1"
bitfld.long 0x00 2. "TFE,Transmit FIFO Empty" "0,1"
bitfld.long 0x00 1. "TFNF,Transmit FIFO Not Full" "0,1"
bitfld.long 0x00 0. "BUSY,SPI Busy Flag" "0,1"
group.long 0x1C++0x03
line.long 0x00 "SPI0_SPI_IER,Interrupt Enable Register(SPI_IER)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RXFIE,Receive FIFO Full Interrupt Mask" "0,1"
bitfld.long 0x00 3. "RXOIE,Receive FIFO Overflow Interrupt Mask" "0,1"
bitfld.long 0x00 2. "RXUIE,Receive FIFO Underflow Interrupt Mask" "0,1"
bitfld.long 0x00 1. "TXOIE,Transmit FIFO Overflow Interrupt Mask" "0,1"
bitfld.long 0x00 0. "TXEIE,Transmit FIFO Empty Interrupt Mask" "0,1"
rgroup.long 0x20++0x03
line.long 0x00 "SPI0_SPI_ISR,Interrupt Status Register(SPI_ISR)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 20. "RXFIR,Receive FIFO Full Raw Interrupt Status" "0,1"
bitfld.long 0x00 19. "RXOIR,Receive FIFO Overflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 18. "RXUIR,Receive FIFO Underflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 17. "TXOIR,Transmit FIFO Overflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 16. "TXEIR,Transmit FIFO Empty Raw Interrupt Status" "0,1"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 4. "RXFIS,Receive FIFO Full Interrupt Status" "0,1"
newline
bitfld.long 0x00 3. "RXOIS,Receive FIFO Overflow Interrupt Status" "0,1"
bitfld.long 0x00 2. "RXUIS,Receive FIFO Underflow Interrupt Status" "0,1"
bitfld.long 0x00 1. "TXOIS,Transmit FIFO Overflow Interrupt Status" "0,1"
bitfld.long 0x00 0. "TXEIS,Transmit FIFO Empty Interrupt Status" "0,1"
rgroup.long 0x24++0x03
line.long 0x00 "SPI0_SPI_TXOICR,Transmit FIFO Overflow Interrupt Clear Register(SPI_TXOICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "TXOICR,Clear Transmit FIFO Overflow Interrupt" "0,1"
rgroup.long 0x28++0x03
line.long 0x00 "SPI0_SPI_RXOICR,Receive FIFO Overflow Interrupt Clear Register(SPI_RXOICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "RXOICR,Clear Receive FIFO Overflow Interrupt" "0,1"
rgroup.long 0x2C++0x03
line.long 0x00 "SPI0_SPI_RXUICR,Receive FIFO Underflow Interrupt Clear Register(SPI_RXUICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "RXUICR,Reserved" "0,1"
rgroup.long 0x34++0x03
line.long 0x00 "SPI0_SPI_ICR,Interrupt Clear Register(SPI_ICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "ICR,Reserved" "0,1"
group.long 0x38++0x03
line.long 0x00 "SPI0_SPI_DMACR,DMA Control Register(SPI_DMACR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 1. "TDMAE,Transmit DMA Enable" "0,1"
bitfld.long 0x00 0. "RDMAE,Receive DMA Enable" "0,1"
group.long 0x3C++0x03
line.long 0x00 "SPI0_SPI_DMATDLR,DMA Transmit Data Level(SPI_DMATDLR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 0.--1. "DMATDL,Transmit Data Level" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SPI0_SPI_DMARDLR,DMA Receive Data Level(SPI_DMARDLR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 0.--1. "DMARDL,Receive Data Level" "0,1,2,3"
rgroup.long 0x44++0x03
line.long 0x00 "SPI0_SPI_IDR,Identification Register(SPI_IDR)"
hexmask.long 0x00 0.--31. 1. "IDCODE,Identification Code"
rgroup.long 0x48++0x03
line.long 0x00 "SPI0_SPI_VIDR,Version ID register(SPI_VIDR)"
hexmask.long 0x00 0.--31. 1. "VID,SPI version ID"
group.long 0x60++0x03
line.long 0x00 "SPI0_SPI_DR_LOW,Data Register(SPI_DR_LOW)"
hexmask.long 0x00 0.--31. 1. "DR,Data Register"
group.long 0xEC++0x03
line.long 0x00 "SPI0_SPI_DR_HIGH,Data Register(SPI_DR_HIGH)"
hexmask.long 0x00 0.--31. 1. "DR,Data Register"
tree.end
tree "SPI1"
base ad:0x4002D000
group.long 0x00++0x03
line.long 0x00 "SPI1_SPI_CTRLR0,Control Register 0(SPI_CTRLR0)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,Reserved"
bitfld.long 0x00 24. "MHS,Microwire Handshaking" "0,1"
bitfld.long 0x00 23. "MDD,Microwire Control" "0,1"
bitfld.long 0x00 22. "MWMOD,Microwire Transfer Mode" "0,1"
bitfld.long 0x00 21. "MST_MODE,Master mode enable" "0,1"
bitfld.long 0x00 16.--20. "DFS_32,Data Frame Size in 32-bit mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--15. "CFS,Control Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "SRL,Shift Register Loop" "0,1"
newline
bitfld.long 0x00 10. "SLV_OE,Slave Output Enable" "0,1"
bitfld.long 0x00 8.--9. "TMOD,Transfer Mode" "0,1,2,3"
bitfld.long 0x00 7. "SCPOL,Serial Clock Polarity" "0,1"
bitfld.long 0x00 6. "SCPH,Serial Clock Phase" "0,1"
bitfld.long 0x00 0.--5. "RSVD_5_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x04++0x03
line.long 0x00 "SPI1_SPI_CTRLR1,Control Register 1(SPI_CTRLR1)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "NDF,Number of Data Frames"
group.long 0x08++0x03
line.long 0x00 "SPI1_SPI_SSENR,SPI Enable Register(SPI_SSENR)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 16.--17. "SER,Slave Select Enable Flag" "0,1,2,3"
hexmask.long.word 0x00 1.--15. 1. "RSVD_15_1,Reserved"
bitfld.long 0x00 0. "SPI_EN,SPI enable trigger" "0,1"
group.long 0x0C++0x03
line.long 0x00 "SPI1_SPI_BAUDR,Baud Rate Select Register(SPI_BAUDR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "SCKDV,SPI Clock Divider"
group.long 0x10++0x03
line.long 0x00 "SPI1_SPI_FTLR,FIFO Threshold Level Register(SPI_FTLR)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 16.--17. "RFT,Receive FIFO Threshold" "0,1,2,3"
hexmask.long.word 0x00 2.--15. 1. "RSVD_15_2,Reserved"
bitfld.long 0x00 0.--1. "TFT,Transmit FIFO Threshold" "0,1,2,3"
rgroup.long 0x14++0x03
line.long 0x00 "SPI1_SPI_FLR,FIFO Level Register(SPI_FLR)"
hexmask.long.word 0x00 19.--31. 1. "RSVD_31_19,Reserved"
bitfld.long 0x00 16.--18. "RXTFL,Receive FIFO Level" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 3.--15. 1. "RSVD_15_3,Reserved"
bitfld.long 0x00 0.--2. "TXTFL,Transmit FIFO Level" "0,1,2,3,4,5,6,7"
rgroup.long 0x18++0x03
line.long 0x00 "SPI1_SPI_SR,Status Register(SPI_SR)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 5. "TXE,Transmission Error" "0,1"
bitfld.long 0x00 4. "RFF,Receive FIFO Full" "0,1"
bitfld.long 0x00 3. "RFNE,Receive FIFO Not Empty" "0,1"
bitfld.long 0x00 2. "TFE,Transmit FIFO Empty" "0,1"
bitfld.long 0x00 1. "TFNF,Transmit FIFO Not Full" "0,1"
bitfld.long 0x00 0. "BUSY,SPI Busy Flag" "0,1"
group.long 0x1C++0x03
line.long 0x00 "SPI1_SPI_IER,Interrupt Enable Register(SPI_IER)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RXFIE,Receive FIFO Full Interrupt Mask" "0,1"
bitfld.long 0x00 3. "RXOIE,Receive FIFO Overflow Interrupt Mask" "0,1"
bitfld.long 0x00 2. "RXUIE,Receive FIFO Underflow Interrupt Mask" "0,1"
bitfld.long 0x00 1. "TXOIE,Transmit FIFO Overflow Interrupt Mask" "0,1"
bitfld.long 0x00 0. "TXEIE,Transmit FIFO Empty Interrupt Mask" "0,1"
rgroup.long 0x20++0x03
line.long 0x00 "SPI1_SPI_ISR,Interrupt Status Register(SPI_ISR)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 20. "RXFIR,Receive FIFO Full Raw Interrupt Status" "0,1"
bitfld.long 0x00 19. "RXOIR,Receive FIFO Overflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 18. "RXUIR,Receive FIFO Underflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 17. "TXOIR,Transmit FIFO Overflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 16. "TXEIR,Transmit FIFO Empty Raw Interrupt Status" "0,1"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 4. "RXFIS,Receive FIFO Full Interrupt Status" "0,1"
newline
bitfld.long 0x00 3. "RXOIS,Receive FIFO Overflow Interrupt Status" "0,1"
bitfld.long 0x00 2. "RXUIS,Receive FIFO Underflow Interrupt Status" "0,1"
bitfld.long 0x00 1. "TXOIS,Transmit FIFO Overflow Interrupt Status" "0,1"
bitfld.long 0x00 0. "TXEIS,Transmit FIFO Empty Interrupt Status" "0,1"
rgroup.long 0x24++0x03
line.long 0x00 "SPI1_SPI_TXOICR,Transmit FIFO Overflow Interrupt Clear Register(SPI_TXOICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "TXOICR,Clear Transmit FIFO Overflow Interrupt" "0,1"
rgroup.long 0x28++0x03
line.long 0x00 "SPI1_SPI_RXOICR,Receive FIFO Overflow Interrupt Clear Register(SPI_RXOICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "RXOICR,Clear Receive FIFO Overflow Interrupt" "0,1"
rgroup.long 0x2C++0x03
line.long 0x00 "SPI1_SPI_RXUICR,Receive FIFO Underflow Interrupt Clear Register(SPI_RXUICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "RXUICR,Reserved" "0,1"
rgroup.long 0x34++0x03
line.long 0x00 "SPI1_SPI_ICR,Interrupt Clear Register(SPI_ICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "ICR,Reserved" "0,1"
group.long 0x38++0x03
line.long 0x00 "SPI1_SPI_DMACR,DMA Control Register(SPI_DMACR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 1. "TDMAE,Transmit DMA Enable" "0,1"
bitfld.long 0x00 0. "RDMAE,Receive DMA Enable" "0,1"
group.long 0x3C++0x03
line.long 0x00 "SPI1_SPI_DMATDLR,DMA Transmit Data Level(SPI_DMATDLR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 0.--1. "DMATDL,Transmit Data Level" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SPI1_SPI_DMARDLR,DMA Receive Data Level(SPI_DMARDLR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 0.--1. "DMARDL,Receive Data Level" "0,1,2,3"
rgroup.long 0x44++0x03
line.long 0x00 "SPI1_SPI_IDR,Identification Register(SPI_IDR)"
hexmask.long 0x00 0.--31. 1. "IDCODE,Identification Code"
rgroup.long 0x48++0x03
line.long 0x00 "SPI1_SPI_VIDR,Version ID register(SPI_VIDR)"
hexmask.long 0x00 0.--31. 1. "VID,SPI version ID"
group.long 0x60++0x03
line.long 0x00 "SPI1_SPI_DR_LOW,Data Register(SPI_DR_LOW)"
hexmask.long 0x00 0.--31. 1. "DR,Data Register"
group.long 0xEC++0x03
line.long 0x00 "SPI1_SPI_DR_HIGH,Data Register(SPI_DR_HIGH)"
hexmask.long 0x00 0.--31. 1. "DR,Data Register"
tree.end
tree "SPI2"
base ad:0x40030000
group.long 0x00++0x03
line.long 0x00 "SPI2_SPI_CTRLR0,Control Register 0(SPI_CTRLR0)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,Reserved"
bitfld.long 0x00 24. "MHS,Microwire Handshaking" "0,1"
bitfld.long 0x00 23. "MDD,Microwire Control" "0,1"
bitfld.long 0x00 22. "MWMOD,Microwire Transfer Mode" "0,1"
bitfld.long 0x00 21. "MST_MODE,Master mode enable" "0,1"
bitfld.long 0x00 16.--20. "DFS_32,Data Frame Size in 32-bit mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--15. "CFS,Control Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "SRL,Shift Register Loop" "0,1"
newline
bitfld.long 0x00 10. "SLV_OE,Slave Output Enable" "0,1"
bitfld.long 0x00 8.--9. "TMOD,Transfer Mode" "0,1,2,3"
bitfld.long 0x00 7. "SCPOL,Serial Clock Polarity" "0,1"
bitfld.long 0x00 6. "SCPH,Serial Clock Phase" "0,1"
bitfld.long 0x00 0.--5. "RSVD_5_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x04++0x03
line.long 0x00 "SPI2_SPI_CTRLR1,Control Register 1(SPI_CTRLR1)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "NDF,Number of Data Frames"
group.long 0x08++0x03
line.long 0x00 "SPI2_SPI_SSENR,SPI Enable Register(SPI_SSENR)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 16.--17. "SER,Slave Select Enable Flag" "0,1,2,3"
hexmask.long.word 0x00 1.--15. 1. "RSVD_15_1,Reserved"
bitfld.long 0x00 0. "SPI_EN,SPI enable trigger" "0,1"
group.long 0x0C++0x03
line.long 0x00 "SPI2_SPI_BAUDR,Baud Rate Select Register(SPI_BAUDR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "SCKDV,SPI Clock Divider"
group.long 0x10++0x03
line.long 0x00 "SPI2_SPI_FTLR,FIFO Threshold Level Register(SPI_FTLR)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 16.--17. "RFT,Receive FIFO Threshold" "0,1,2,3"
hexmask.long.word 0x00 2.--15. 1. "RSVD_15_2,Reserved"
bitfld.long 0x00 0.--1. "TFT,Transmit FIFO Threshold" "0,1,2,3"
rgroup.long 0x14++0x03
line.long 0x00 "SPI2_SPI_FLR,FIFO Level Register(SPI_FLR)"
hexmask.long.word 0x00 19.--31. 1. "RSVD_31_19,Reserved"
bitfld.long 0x00 16.--18. "RXTFL,Receive FIFO Level" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 3.--15. 1. "RSVD_15_3,Reserved"
bitfld.long 0x00 0.--2. "TXTFL,Transmit FIFO Level" "0,1,2,3,4,5,6,7"
rgroup.long 0x18++0x03
line.long 0x00 "SPI2_SPI_SR,Status Register(SPI_SR)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 5. "TXE,Transmission Error" "0,1"
bitfld.long 0x00 4. "RFF,Receive FIFO Full" "0,1"
bitfld.long 0x00 3. "RFNE,Receive FIFO Not Empty" "0,1"
bitfld.long 0x00 2. "TFE,Transmit FIFO Empty" "0,1"
bitfld.long 0x00 1. "TFNF,Transmit FIFO Not Full" "0,1"
bitfld.long 0x00 0. "BUSY,SPI Busy Flag" "0,1"
group.long 0x1C++0x03
line.long 0x00 "SPI2_SPI_IER,Interrupt Enable Register(SPI_IER)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RXFIE,Receive FIFO Full Interrupt Mask" "0,1"
bitfld.long 0x00 3. "RXOIE,Receive FIFO Overflow Interrupt Mask" "0,1"
bitfld.long 0x00 2. "RXUIE,Receive FIFO Underflow Interrupt Mask" "0,1"
bitfld.long 0x00 1. "TXOIE,Transmit FIFO Overflow Interrupt Mask" "0,1"
bitfld.long 0x00 0. "TXEIE,Transmit FIFO Empty Interrupt Mask" "0,1"
rgroup.long 0x20++0x03
line.long 0x00 "SPI2_SPI_ISR,Interrupt Status Register(SPI_ISR)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 20. "RXFIR,Receive FIFO Full Raw Interrupt Status" "0,1"
bitfld.long 0x00 19. "RXOIR,Receive FIFO Overflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 18. "RXUIR,Receive FIFO Underflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 17. "TXOIR,Transmit FIFO Overflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 16. "TXEIR,Transmit FIFO Empty Raw Interrupt Status" "0,1"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 4. "RXFIS,Receive FIFO Full Interrupt Status" "0,1"
newline
bitfld.long 0x00 3. "RXOIS,Receive FIFO Overflow Interrupt Status" "0,1"
bitfld.long 0x00 2. "RXUIS,Receive FIFO Underflow Interrupt Status" "0,1"
bitfld.long 0x00 1. "TXOIS,Transmit FIFO Overflow Interrupt Status" "0,1"
bitfld.long 0x00 0. "TXEIS,Transmit FIFO Empty Interrupt Status" "0,1"
rgroup.long 0x24++0x03
line.long 0x00 "SPI2_SPI_TXOICR,Transmit FIFO Overflow Interrupt Clear Register(SPI_TXOICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "TXOICR,Clear Transmit FIFO Overflow Interrupt" "0,1"
rgroup.long 0x28++0x03
line.long 0x00 "SPI2_SPI_RXOICR,Receive FIFO Overflow Interrupt Clear Register(SPI_RXOICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "RXOICR,Clear Receive FIFO Overflow Interrupt" "0,1"
rgroup.long 0x2C++0x03
line.long 0x00 "SPI2_SPI_RXUICR,Receive FIFO Underflow Interrupt Clear Register(SPI_RXUICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "RXUICR,Reserved" "0,1"
rgroup.long 0x34++0x03
line.long 0x00 "SPI2_SPI_ICR,Interrupt Clear Register(SPI_ICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "ICR,Reserved" "0,1"
group.long 0x38++0x03
line.long 0x00 "SPI2_SPI_DMACR,DMA Control Register(SPI_DMACR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 1. "TDMAE,Transmit DMA Enable" "0,1"
bitfld.long 0x00 0. "RDMAE,Receive DMA Enable" "0,1"
group.long 0x3C++0x03
line.long 0x00 "SPI2_SPI_DMATDLR,DMA Transmit Data Level(SPI_DMATDLR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 0.--1. "DMATDL,Transmit Data Level" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SPI2_SPI_DMARDLR,DMA Receive Data Level(SPI_DMARDLR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 0.--1. "DMARDL,Receive Data Level" "0,1,2,3"
rgroup.long 0x44++0x03
line.long 0x00 "SPI2_SPI_IDR,Identification Register(SPI_IDR)"
hexmask.long 0x00 0.--31. 1. "IDCODE,Identification Code"
rgroup.long 0x48++0x03
line.long 0x00 "SPI2_SPI_VIDR,Version ID register(SPI_VIDR)"
hexmask.long 0x00 0.--31. 1. "VID,SPI version ID"
group.long 0x60++0x03
line.long 0x00 "SPI2_SPI_DR_LOW,Data Register(SPI_DR_LOW)"
hexmask.long 0x00 0.--31. 1. "DR,Data Register"
group.long 0xEC++0x03
line.long 0x00 "SPI2_SPI_DR_HIGH,Data Register(SPI_DR_HIGH)"
hexmask.long 0x00 0.--31. 1. "DR,Data Register"
tree.end
tree "SPI3"
base ad:0x40031000
group.long 0x00++0x03
line.long 0x00 "SPI3_SPI_CTRLR0,Control Register 0(SPI_CTRLR0)"
hexmask.long.byte 0x00 25.--31. 1. "RSVD_31_25,Reserved"
bitfld.long 0x00 24. "MHS,Microwire Handshaking" "0,1"
bitfld.long 0x00 23. "MDD,Microwire Control" "0,1"
bitfld.long 0x00 22. "MWMOD,Microwire Transfer Mode" "0,1"
bitfld.long 0x00 21. "MST_MODE,Master mode enable" "0,1"
bitfld.long 0x00 16.--20. "DFS_32,Data Frame Size in 32-bit mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--15. "CFS,Control Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "SRL,Shift Register Loop" "0,1"
newline
bitfld.long 0x00 10. "SLV_OE,Slave Output Enable" "0,1"
bitfld.long 0x00 8.--9. "TMOD,Transfer Mode" "0,1,2,3"
bitfld.long 0x00 7. "SCPOL,Serial Clock Polarity" "0,1"
bitfld.long 0x00 6. "SCPH,Serial Clock Phase" "0,1"
bitfld.long 0x00 0.--5. "RSVD_5_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x04++0x03
line.long 0x00 "SPI3_SPI_CTRLR1,Control Register 1(SPI_CTRLR1)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "NDF,Number of Data Frames"
group.long 0x08++0x03
line.long 0x00 "SPI3_SPI_SSENR,SPI Enable Register(SPI_SSENR)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 16.--17. "SER,Slave Select Enable Flag" "0,1,2,3"
hexmask.long.word 0x00 1.--15. 1. "RSVD_15_1,Reserved"
bitfld.long 0x00 0. "SPI_EN,SPI enable trigger" "0,1"
group.long 0x0C++0x03
line.long 0x00 "SPI3_SPI_BAUDR,Baud Rate Select Register(SPI_BAUDR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "SCKDV,SPI Clock Divider"
group.long 0x10++0x03
line.long 0x00 "SPI3_SPI_FTLR,FIFO Threshold Level Register(SPI_FTLR)"
hexmask.long.word 0x00 18.--31. 1. "RSVD_31_18,Reserved"
bitfld.long 0x00 16.--17. "RFT,Receive FIFO Threshold" "0,1,2,3"
hexmask.long.word 0x00 2.--15. 1. "RSVD_15_2,Reserved"
bitfld.long 0x00 0.--1. "TFT,Transmit FIFO Threshold" "0,1,2,3"
rgroup.long 0x14++0x03
line.long 0x00 "SPI3_SPI_FLR,FIFO Level Register(SPI_FLR)"
hexmask.long.word 0x00 19.--31. 1. "RSVD_31_19,Reserved"
bitfld.long 0x00 16.--18. "RXTFL,Receive FIFO Level" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 3.--15. 1. "RSVD_15_3,Reserved"
bitfld.long 0x00 0.--2. "TXTFL,Transmit FIFO Level" "0,1,2,3,4,5,6,7"
rgroup.long 0x18++0x03
line.long 0x00 "SPI3_SPI_SR,Status Register(SPI_SR)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 5. "TXE,Transmission Error" "0,1"
bitfld.long 0x00 4. "RFF,Receive FIFO Full" "0,1"
bitfld.long 0x00 3. "RFNE,Receive FIFO Not Empty" "0,1"
bitfld.long 0x00 2. "TFE,Transmit FIFO Empty" "0,1"
bitfld.long 0x00 1. "TFNF,Transmit FIFO Not Full" "0,1"
bitfld.long 0x00 0. "BUSY,SPI Busy Flag" "0,1"
group.long 0x1C++0x03
line.long 0x00 "SPI3_SPI_IER,Interrupt Enable Register(SPI_IER)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RXFIE,Receive FIFO Full Interrupt Mask" "0,1"
bitfld.long 0x00 3. "RXOIE,Receive FIFO Overflow Interrupt Mask" "0,1"
bitfld.long 0x00 2. "RXUIE,Receive FIFO Underflow Interrupt Mask" "0,1"
bitfld.long 0x00 1. "TXOIE,Transmit FIFO Overflow Interrupt Mask" "0,1"
bitfld.long 0x00 0. "TXEIE,Transmit FIFO Empty Interrupt Mask" "0,1"
rgroup.long 0x20++0x03
line.long 0x00 "SPI3_SPI_ISR,Interrupt Status Register(SPI_ISR)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 20. "RXFIR,Receive FIFO Full Raw Interrupt Status" "0,1"
bitfld.long 0x00 19. "RXOIR,Receive FIFO Overflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 18. "RXUIR,Receive FIFO Underflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 17. "TXOIR,Transmit FIFO Overflow Raw Interrupt Status" "0,1"
bitfld.long 0x00 16. "TXEIR,Transmit FIFO Empty Raw Interrupt Status" "0,1"
hexmask.long.word 0x00 5.--15. 1. "RSVD_15_5,Reserved"
bitfld.long 0x00 4. "RXFIS,Receive FIFO Full Interrupt Status" "0,1"
newline
bitfld.long 0x00 3. "RXOIS,Receive FIFO Overflow Interrupt Status" "0,1"
bitfld.long 0x00 2. "RXUIS,Receive FIFO Underflow Interrupt Status" "0,1"
bitfld.long 0x00 1. "TXOIS,Transmit FIFO Overflow Interrupt Status" "0,1"
bitfld.long 0x00 0. "TXEIS,Transmit FIFO Empty Interrupt Status" "0,1"
rgroup.long 0x24++0x03
line.long 0x00 "SPI3_SPI_TXOICR,Transmit FIFO Overflow Interrupt Clear Register(SPI_TXOICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "TXOICR,Clear Transmit FIFO Overflow Interrupt" "0,1"
rgroup.long 0x28++0x03
line.long 0x00 "SPI3_SPI_RXOICR,Receive FIFO Overflow Interrupt Clear Register(SPI_RXOICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "RXOICR,Clear Receive FIFO Overflow Interrupt" "0,1"
rgroup.long 0x2C++0x03
line.long 0x00 "SPI3_SPI_RXUICR,Receive FIFO Underflow Interrupt Clear Register(SPI_RXUICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "RXUICR,Reserved" "0,1"
rgroup.long 0x34++0x03
line.long 0x00 "SPI3_SPI_ICR,Interrupt Clear Register(SPI_ICR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "ICR,Reserved" "0,1"
group.long 0x38++0x03
line.long 0x00 "SPI3_SPI_DMACR,DMA Control Register(SPI_DMACR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 1. "TDMAE,Transmit DMA Enable" "0,1"
bitfld.long 0x00 0. "RDMAE,Receive DMA Enable" "0,1"
group.long 0x3C++0x03
line.long 0x00 "SPI3_SPI_DMATDLR,DMA Transmit Data Level(SPI_DMATDLR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 0.--1. "DMATDL,Transmit Data Level" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SPI3_SPI_DMARDLR,DMA Receive Data Level(SPI_DMARDLR)"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 0.--1. "DMARDL,Receive Data Level" "0,1,2,3"
rgroup.long 0x44++0x03
line.long 0x00 "SPI3_SPI_IDR,Identification Register(SPI_IDR)"
hexmask.long 0x00 0.--31. 1. "IDCODE,Identification Code"
rgroup.long 0x48++0x03
line.long 0x00 "SPI3_SPI_VIDR,Version ID register(SPI_VIDR)"
hexmask.long 0x00 0.--31. 1. "VID,SPI version ID"
group.long 0x60++0x03
line.long 0x00 "SPI3_SPI_DR_LOW,Data Register(SPI_DR_LOW)"
hexmask.long 0x00 0.--31. 1. "DR,Data Register"
group.long 0xEC++0x03
line.long 0x00 "SPI3_SPI_DR_HIGH,Data Register(SPI_DR_HIGH)"
hexmask.long 0x00 0.--31. 1. "DR,Data Register"
tree.end
tree.end
tree "SRMC"
base ad:0x4007E000
rgroup.long 0x00++0x03
line.long 0x00 "SRMC_VERID,Version ID Register (SRMC_VERID)"
hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number"
hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number"
hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Number"
rgroup.long 0x04++0x03
line.long 0x00 "SRMC_PARAM,Parameter Register (SRMC_PARAM)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "EPDOWN,Existence of PDOWN feature" "0,1"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "ESACKERR,Existence of SRS[SACKERR] status indication feature" "0,1"
bitfld.long 0x00 12. "RSVD_12,Reserved" "0,1"
bitfld.long 0x00 11. "EMDM_AP,Existence of SRS[MDM_AP] status indication feature" "0,1"
bitfld.long 0x00 10. "ESW,Existence of SRS[SW] status indication feature" "0,1"
newline
bitfld.long 0x00 9. "ELOCKUP,Existence of SRS[LOCKUP] status indication feature" "0,1"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "EPOR,Existence of SRS[POR] status indication feature" "0,1"
bitfld.long 0x00 6. "EPIN,Existence of SRS[EPIN] status indication feature" "0,1"
bitfld.long 0x00 5. "EWDOG,Existence of SRS[EWOG] status indication feature" "0,1"
bitfld.long 0x00 4. "RSVD_4,Reserved" "0,1"
bitfld.long 0x00 3. "ELOL,Existence of SRS[LOL] status indication feature" "0,1"
newline
bitfld.long 0x00 2. "ELOC,Existence of SRS[LOC] status indication feature" "0,1"
bitfld.long 0x00 1. "ELVD,Existence of SRS[LVD] status indication feature" "0,1"
bitfld.long 0x00 0. "EWAKEUP,Existence of SRS[WAKEUP] status indication feature" "0,1"
group.long 0x08++0x03
line.long 0x00 "SRMC_SRS,System Reset Status Register (SRMC_SRS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "SACKERR,Stop Acknowledge Error" "0,1"
bitfld.long 0x00 14. "RSVD_14,Reserved" "0,1"
bitfld.long 0x00 13. "SERU_SYS,SERU System Reset Request" "0,1"
bitfld.long 0x00 12. "SERU_COLD,SERU Cold Reset Request" "0,1"
bitfld.long 0x00 11. "MDM_AP,MDM-AP System Reset Request" "0,1"
bitfld.long 0x00 10. "SW,Software Reset" "0,1"
newline
bitfld.long 0x00 9. "LOCKUP,LOCKUP Reset" "0,1"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "POR,Power-On Reset" "0,1"
bitfld.long 0x00 6. "PIN,External Pin Reset" "0,1"
bitfld.long 0x00 5. "WDOG,WDOG Reset" "0,1"
bitfld.long 0x00 3.--4. "RSVD_4_3,Reserved" "0,1,2,3"
bitfld.long 0x00 2. "LOC,Loss Of Clock Reset" "0,1"
newline
bitfld.long 0x00 1. "LVD,Low Voltage Reset" "0,1"
bitfld.long 0x00 0. "RSVD_0,Reserved" "0,1"
group.long 0x0C++0x03
line.long 0x00 "SRMC_CTRL,Reset Control register (SRMC_CTRL)"
bitfld.long 0x00 31. "LOCKUP_RST_EN,Core Lockup Reset enable" "0,1"
hexmask.long.word 0x00 16.--30. 1. "RSVD_30_16,Reserved"
bitfld.long 0x00 8.--12. "RSTFLTSEL,Reset Pin Filter Bus Clock Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 3.--7. "RSVD_7_3,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 2. "RSTFLTSS,Reset Pin Filter Select in Stop Mode" "0,1"
bitfld.long 0x00 0.--1. "RSTFLTSRW,Reset Pin Filter Select in Run and Wait Modes" "0,1,2,3"
rgroup.long 0x10++0x03
line.long 0x00 "SRMC_MR,Reserved"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,Reserved"
rgroup.long 0x14++0x03
line.long 0x00 "SRMC_FM,Reserved"
hexmask.long 0x00 0.--31. 1. "RSVD_31_0,Reserved"
rgroup.long 0x18++0x03
line.long 0x00 "SRMC_SSRS,Sticky System Reset Status Register (SRMC_SSRS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "SSACKERR,Sticky Stop Acknowledge Error" "0,1"
bitfld.long 0x00 12.--14. "RSVD_14_12,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 13. "SSERU_SYS,Sticky SERU System Reset Request" "0,1"
bitfld.long 0x00 12. "SSERU_COLD,Sticky SERU Cold Reset Request" "0,1"
bitfld.long 0x00 11. "SMDM_AP,Sticky MDM-AP System Reset Request" "0,1"
bitfld.long 0x00 10. "SSW,Sticky Software Reset" "0,1"
newline
bitfld.long 0x00 9. "SLOCKUP,Sticky Core Lock Up" "0,1"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "SPOR,Sticky Power-On Reset" "0,1"
bitfld.long 0x00 6. "SPIN,Sticky external RESET pin Reset" "0,1"
bitfld.long 0x00 5. "SWDOG,Sticky watchdog timer timing out (WDOG)" "0,1"
bitfld.long 0x00 3.--4. "RSVD_4_3,Reserved" "0,1,2,3"
bitfld.long 0x00 2. "SLOC,Sticky loss of external clock" "0,1"
newline
bitfld.long 0x00 1. "SLVD,Sticky low voltage reset" "0,1"
bitfld.long 0x00 0. "RSVD_0,Reserved" "0,1"
group.long 0x1C++0x03
line.long 0x00 "SRMC_SRIE,System Reset Interrupt Enable Register (SRMC_SRIE)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "SACKERR,Stop Acknowledge Error Interrupt" "0,1"
bitfld.long 0x00 14. "RSVD_14,Reserved" "0,1"
bitfld.long 0x00 13. "SERU_SYS,SERU System Reset Request" "0,1"
bitfld.long 0x00 12. "SERU_COLD,SERU Cold Reset Request" "0,1"
bitfld.long 0x00 11. "RSVD_11,Reserved" "0,1"
bitfld.long 0x00 10. "SW,Software Reset Interrupt Enable" "0,1"
newline
bitfld.long 0x00 9. "LOCKUP,Core Lockup Interrupt" "0,1"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "GIE,Global Interrupt Enable" "0,1"
bitfld.long 0x00 6. "PIN,External Reset Pin Interrupt Enable" "0,1"
bitfld.long 0x00 5. "WDOG,Watchdog Interrupt Enable" "0,1"
bitfld.long 0x00 3.--4. "RSVD_4_3,Reserved" "0,1,2,3"
bitfld.long 0x00 2. "LOC,Loss-of-Clock Interrupt Enable" "0,1"
newline
bitfld.long 0x00 0.--1. "DELAY,Maximum reset delay time" "0,1,2,3"
group.long 0x20++0x03
line.long 0x00 "SRMC_PMPORT,Power Mode Protection register (SRMC_PMPROT)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "APD,Allow Power down mode" "0,1"
group.long 0x24++0x03
line.long 0x00 "SRMC_PMCTRL,Power Mode Control register (SRMC_PMCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.byte 0x00 8.--15. 1. "DSMACKTMO,Deep Sleep Mode Acknowledge Time Out"
bitfld.long 0x00 2.--7. "RSVD_7_2,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--1. "DSMC,Deep Sleep Mode Configuration" "0,1,2,3"
rgroup.long 0x28++0x03
line.long 0x00 "SRMC_PMSTAT,Power Mode Status register (SRMC_PMSTAT)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 8. "DSMABORT,Deep Sleep Mode Aborted" "0,1"
bitfld.long 0x00 4.--7. "RSVD_7_4,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "PMSTAT,PMSTAT Power Mode Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x2C++0x03
line.long 0x00 "SRMC_DSMWUPC1,DSM Wakeup Control Register (SRMC_DSMWUPC)"
bitfld.long 0x00 31. "RSVD_31,Reserved" "0,1"
hexmask.long.word 0x00 20.--30. 1. "WUPSRC_PL14_4,Wakeup Source Polarity"
bitfld.long 0x00 19. "RSVD_19,Reserved" "0,1"
bitfld.long 0x00 16.--18. "WUPSRC_PL2_0,Wakeup Source Polarity" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 4.--15. 1. "WUPSRC_EN15_4,Wakeup Source Enable"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
bitfld.long 0x00 0.--2. "WUPSRC_EN2_0,Wakeup Source Enable" "0,1,2,3,4,5,6,7"
group.long 0x30++0x03
line.long 0x00 "SRMC_DSMWUPC2,DSM Wakeup Control Register (SRMC_DSMWUPC)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "RSVD_16,Reserved" "0,1"
hexmask.long.word 0x00 1.--15. 1. "RSVD_15_1,Reserved"
bitfld.long 0x00 0. "WUPSRC_EN16,Wakeup Source Enable" "0,1"
group.long 0x34++0x03
line.long 0x00 "SRMC_DSMWUPS,DSM Wakeup Status Register (SRMC_DSMWUPS)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
hexmask.long.word 0x00 4.--16. 1. "WUPS_16_4,Wakeup Status"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
bitfld.long 0x00 0.--2. "WUPS_2_0,Wakeup Status" "0,1,2,3,4,5,6,7"
tree.end
tree "STIM"
base ad:0x40040000
rgroup.long 0x00++0x03
line.long 0x00 "STIM_VERID,stim version ID register(STIM_VERID)"
hexmask.long 0x00 0.--31. 1. "VERID,Version ID"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
rgroup.long ($2+0x04)++0x03
line.long 0x00 "STIM_CNTn$1,stim channel n counter register(STIM_CNTn)"
hexmask.long 0x00 0.--31. 1. "CNT,32-bit counter"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x14)++0x03
line.long 0x00 "STIM_CVn$1,stim channel n compare value register(STIM_CVn)"
hexmask.long 0x00 0.--31. 1. "CV,stim compare value"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x24)++0x03
line.long 0x00 "STIM_SCn$1,stim channel n status and control register(STIM_SCn)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "FLAG,timer flag" "0,1"
bitfld.long 0x00 14. "EN,stim enable" "0,1"
bitfld.long 0x00 13. "IE,interrupt enable" "0,1"
bitfld.long 0x00 12. "DMAE,dma enable" "0,1"
bitfld.long 0x00 11. "RSTDIS,counter reset disable on match" "0,1"
bitfld.long 0x00 10. "MODE,timer mode select" "0,1"
bitfld.long 0x00 8.--9. "PSRC,input pin source select" "0,1,2,3"
bitfld.long 0x00 7. "POL,input pin polarity" "0,1"
newline
bitfld.long 0x00 6. "PSEN,Prescaler/Glitch filter enable" "0,1"
bitfld.long 0x00 2.--5. "PSDIV,Prescaler divider factor/Glitch filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--1. "CLKS,clock source select" "0,1,2,3"
repeat.end
tree.end
tree "TDG"
tree "TDG0"
base ad:0x4000F000
rgroup.long 0x00++0x03
line.long 0x00 "TDG0_TDG_VERID,TDG Version Idenfication(TDG_VERID)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 4.--7. "MAJOR,Major version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "MINOR,Minor version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x04++0x03
line.long 0x00 "TDG0_TDG_PARAM,TDG Parameter(TDG_PARAM)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 4.--7. "CHNUM,Channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "DOPNUM,Delay output point number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x08++0x03
line.long 0x00 "TDG0_TDG_CTRL1,TDG Control Registers 1(TDG_CTRL1)"
hexmask.long.word 0x00 22.--31. 1. "RSVD_31_22,Reserved"
bitfld.long 0x00 20.--21. "UPMD,Channel configulation update mode" "0,1,2,3"
bitfld.long 0x00 18.--19. "RSVD_19_18,Reserved" "0,1,2,3"
bitfld.long 0x00 17. "SWTRG,Software trig" "0,1"
bitfld.long 0x00 16. "CFGUP,Configuration update" "0,1"
bitfld.long 0x00 11.--15. "RSVD_15_11,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--10. "PRES,Prescalar" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 7. "RSVD_7,Reserved" "0,1"
newline
bitfld.long 0x00 6. "CLRMD,Counter clear mode" "0,1"
bitfld.long 0x00 5. "CNTMD,Count mode" "0,1"
bitfld.long 0x00 4. "TRIGS,Trig source select" "0,1"
bitfld.long 0x00 1.--3. "RSVD_3_1,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "TDGEN,TDG enabled" "0,1"
group.long 0x0C++0x03
line.long 0x00 "TDG0_TDG_CTRL2,TDG Control Register 2(TDG_CTRL2)"
hexmask.long.word 0x00 22.--31. 1. "RSVD_31_22,Reserved"
bitfld.long 0x00 21. "CH5E,Channel 5 enable" "0,1"
bitfld.long 0x00 20. "CH4E,Channel 4 enable" "0,1"
bitfld.long 0x00 19. "CH3E,Channel 3 enable" "0,1"
bitfld.long 0x00 18. "CH2E,Channel 2 enable" "0,1"
bitfld.long 0x00 17. "CH1E,Channel 1 enable" "0,1"
bitfld.long 0x00 16. "CH0E,Channel 0 enable" "0,1"
hexmask.long.byte 0x00 9.--15. 1. "RSVD_15_9,Reserved"
newline
bitfld.long 0x00 8. "ERRIE,Error interrupt enable" "0,1"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "CDO5IE,Channel 5 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 4. "CDO4IE,Channel 4 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 3. "CDO3IE,Channel 3 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 2. "CDO2IE,Channel 2 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 1. "CDO1IE,Channel 1 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 0. "CDO0IE,Channel 0 complete delay output interrupt enable" "0,1"
group.long 0x10++0x03
line.long 0x00 "TDG0_TDG_STAT,TDG Status Register(TDG_STAT)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "ERRIF,Error interrupt flag" "0,1"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "CDO5IF,Channel 5 complete delay output interrupt flag" "0,1"
bitfld.long 0x00 4. "CDO4IF,Channel 4 complete delay output interrupt flag" "0,1"
bitfld.long 0x00 3. "CDO3IF,Channel 3 complete delay output interrupt flag" "0,1"
bitfld.long 0x00 2. "CDO2IF,Channel 2 complete delay output interrupt flag" "0,1"
bitfld.long 0x00 1. "CDO1IF,Channel 1 complete delay output interrupt flag" "0,1"
newline
bitfld.long 0x00 0. "CDO0IF,Channel 0 complete delay output interrupt flag" "0,1"
group.long 0x14++0x03
line.long 0x00 "TDG0_TDG_MOD,TDG Modulate Register(TDG_MOD)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "MOD,TDG Modulate value"
rgroup.long 0x18++0x03
line.long 0x00 "TDG0_TDG_CNT,TDG Counter Register(TDG_CNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNT,TDG counter value"
group.long 0x1C++0x03
line.long 0x00 "TDG0_TDG_CHnCTRL0,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x20++0x03
line.long 0x00 "TDG0_TDG_CHnDO0OFS0,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0x24++0x03
line.long 0x00 "TDG0_TDG_CHnDO1OFS0,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0x28++0x03
line.long 0x00 "TDG0_TDG_CHnDO2OFS0,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0x2C++0x03
line.long 0x00 "TDG0_TDG_CHnDO3OFS0,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0x30++0x03
line.long 0x00 "TDG0_TDG_CHnDO4OFS0,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0x34++0x03
line.long 0x00 "TDG0_TDG_CHnDO5OFS0,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0x38++0x03
line.long 0x00 "TDG0_TDG_CHnDO6OFS0,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0x3C++0x03
line.long 0x00 "TDG0_TDG_CHnDO7OFS0,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0x40++0x03
line.long 0x00 "TDG0_TDG_CHnCDOINTDLY0,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0x44++0x03
line.long 0x00 "TDG0_TDG_CHnCTRL1,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x48++0x03
line.long 0x00 "TDG0_TDG_CHnDO0OFS1,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0x4C++0x03
line.long 0x00 "TDG0_TDG_CHnDO1OFS1,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0x50++0x03
line.long 0x00 "TDG0_TDG_CHnDO2OFS1,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0x54++0x03
line.long 0x00 "TDG0_TDG_CHnDO3OFS1,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0x58++0x03
line.long 0x00 "TDG0_TDG_CHnDO4OFS1,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0x5C++0x03
line.long 0x00 "TDG0_TDG_CHnDO5OFS1,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0x60++0x03
line.long 0x00 "TDG0_TDG_CHnDO6OFS1,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0x64++0x03
line.long 0x00 "TDG0_TDG_CHnDO7OFS1,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0x68++0x03
line.long 0x00 "TDG0_TDG_CHnCDOINTDLY1,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0x6C++0x03
line.long 0x00 "TDG0_TDG_CHnCTRL2,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x70++0x03
line.long 0x00 "TDG0_TDG_CHnDO0OFS2,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0x74++0x03
line.long 0x00 "TDG0_TDG_CHnDO1OFS2,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0x78++0x03
line.long 0x00 "TDG0_TDG_CHnDO2OFS2,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0x7C++0x03
line.long 0x00 "TDG0_TDG_CHnDO3OFS2,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0x80++0x03
line.long 0x00 "TDG0_TDG_CHnDO4OFS2,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0x84++0x03
line.long 0x00 "TDG0_TDG_CHnDO5OFS2,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0x88++0x03
line.long 0x00 "TDG0_TDG_CHnDO6OFS2,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0x8C++0x03
line.long 0x00 "TDG0_TDG_CHnDO7OFS2,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0x90++0x03
line.long 0x00 "TDG0_TDG_CHnCDOINTDLY2,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0x94++0x03
line.long 0x00 "TDG0_TDG_CHnCTRL3,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x98++0x03
line.long 0x00 "TDG0_TDG_CHnDO0OFS3,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0x9C++0x03
line.long 0x00 "TDG0_TDG_CHnDO1OFS3,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0xA0++0x03
line.long 0x00 "TDG0_TDG_CHnDO2OFS3,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0xA4++0x03
line.long 0x00 "TDG0_TDG_CHnDO3OFS3,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0xA8++0x03
line.long 0x00 "TDG0_TDG_CHnDO4OFS3,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0xAC++0x03
line.long 0x00 "TDG0_TDG_CHnDO5OFS3,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0xB0++0x03
line.long 0x00 "TDG0_TDG_CHnDO6OFS3,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0xB4++0x03
line.long 0x00 "TDG0_TDG_CHnDO7OFS3,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0xB8++0x03
line.long 0x00 "TDG0_TDG_CHnCDOINTDLY3,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0xBC++0x03
line.long 0x00 "TDG0_TDG_CHnCTRL4,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xC0++0x03
line.long 0x00 "TDG0_TDG_CHnDO0OFS4,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0xC4++0x03
line.long 0x00 "TDG0_TDG_CHnDO1OFS4,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0xC8++0x03
line.long 0x00 "TDG0_TDG_CHnDO2OFS4,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0xCC++0x03
line.long 0x00 "TDG0_TDG_CHnDO3OFS4,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0xD0++0x03
line.long 0x00 "TDG0_TDG_CHnDO4OFS4,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0xD4++0x03
line.long 0x00 "TDG0_TDG_CHnDO5OFS4,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0xD8++0x03
line.long 0x00 "TDG0_TDG_CHnDO6OFS4,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0xDC++0x03
line.long 0x00 "TDG0_TDG_CHnDO7OFS4,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0xE0++0x03
line.long 0x00 "TDG0_TDG_CHnCDOINTDLY4,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0xE4++0x03
line.long 0x00 "TDG0_TDG_CHnCTRL5,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xE8++0x03
line.long 0x00 "TDG0_TDG_CHnDO0OFS5,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0xEC++0x03
line.long 0x00 "TDG0_TDG_CHnDO1OFS5,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0xF0++0x03
line.long 0x00 "TDG0_TDG_CHnDO2OFS5,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0xF4++0x03
line.long 0x00 "TDG0_TDG_CHnDO3OFS5,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0xF8++0x03
line.long 0x00 "TDG0_TDG_CHnDO4OFS5,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0xFC++0x03
line.long 0x00 "TDG0_TDG_CHnDO5OFS5,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0x100++0x03
line.long 0x00 "TDG0_TDG_CHnDO6OFS5,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0x104++0x03
line.long 0x00 "TDG0_TDG_CHnDO7OFS5,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0x108++0x03
line.long 0x00 "TDG0_TDG_CHnCDOINTDLY5,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
tree.end
tree "TDG1"
base ad:0x4001B000
rgroup.long 0x00++0x03
line.long 0x00 "TDG1_TDG_VERID,TDG Version Idenfication(TDG_VERID)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 4.--7. "MAJOR,Major version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "MINOR,Minor version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x04++0x03
line.long 0x00 "TDG1_TDG_PARAM,TDG Parameter(TDG_PARAM)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 4.--7. "CHNUM,Channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "DOPNUM,Delay output point number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x08++0x03
line.long 0x00 "TDG1_TDG_CTRL1,TDG Control Registers 1(TDG_CTRL1)"
hexmask.long.word 0x00 22.--31. 1. "RSVD_31_22,Reserved"
bitfld.long 0x00 20.--21. "UPMD,Channel configulation update mode" "0,1,2,3"
bitfld.long 0x00 18.--19. "RSVD_19_18,Reserved" "0,1,2,3"
bitfld.long 0x00 17. "SWTRG,Software trig" "0,1"
bitfld.long 0x00 16. "CFGUP,Configuration update" "0,1"
bitfld.long 0x00 11.--15. "RSVD_15_11,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--10. "PRES,Prescalar" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 7. "RSVD_7,Reserved" "0,1"
newline
bitfld.long 0x00 6. "CLRMD,Counter clear mode" "0,1"
bitfld.long 0x00 5. "CNTMD,Count mode" "0,1"
bitfld.long 0x00 4. "TRIGS,Trig source select" "0,1"
bitfld.long 0x00 1.--3. "RSVD_3_1,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "TDGEN,TDG enabled" "0,1"
group.long 0x0C++0x03
line.long 0x00 "TDG1_TDG_CTRL2,TDG Control Register 2(TDG_CTRL2)"
hexmask.long.word 0x00 22.--31. 1. "RSVD_31_22,Reserved"
bitfld.long 0x00 21. "CH5E,Channel 5 enable" "0,1"
bitfld.long 0x00 20. "CH4E,Channel 4 enable" "0,1"
bitfld.long 0x00 19. "CH3E,Channel 3 enable" "0,1"
bitfld.long 0x00 18. "CH2E,Channel 2 enable" "0,1"
bitfld.long 0x00 17. "CH1E,Channel 1 enable" "0,1"
bitfld.long 0x00 16. "CH0E,Channel 0 enable" "0,1"
hexmask.long.byte 0x00 9.--15. 1. "RSVD_15_9,Reserved"
newline
bitfld.long 0x00 8. "ERRIE,Error interrupt enable" "0,1"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "CDO5IE,Channel 5 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 4. "CDO4IE,Channel 4 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 3. "CDO3IE,Channel 3 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 2. "CDO2IE,Channel 2 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 1. "CDO1IE,Channel 1 complete delay output interrupt enable" "0,1"
bitfld.long 0x00 0. "CDO0IE,Channel 0 complete delay output interrupt enable" "0,1"
group.long 0x10++0x03
line.long 0x00 "TDG1_TDG_STAT,TDG Status Register(TDG_STAT)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "ERRIF,Error interrupt flag" "0,1"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "CDO5IF,Channel 5 complete delay output interrupt flag" "0,1"
bitfld.long 0x00 4. "CDO4IF,Channel 4 complete delay output interrupt flag" "0,1"
bitfld.long 0x00 3. "CDO3IF,Channel 3 complete delay output interrupt flag" "0,1"
bitfld.long 0x00 2. "CDO2IF,Channel 2 complete delay output interrupt flag" "0,1"
bitfld.long 0x00 1. "CDO1IF,Channel 1 complete delay output interrupt flag" "0,1"
newline
bitfld.long 0x00 0. "CDO0IF,Channel 0 complete delay output interrupt flag" "0,1"
group.long 0x14++0x03
line.long 0x00 "TDG1_TDG_MOD,TDG Modulate Register(TDG_MOD)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "MOD,TDG Modulate value"
rgroup.long 0x18++0x03
line.long 0x00 "TDG1_TDG_CNT,TDG Counter Register(TDG_CNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNT,TDG counter value"
group.long 0x1C++0x03
line.long 0x00 "TDG1_TDG_CHnCTRL0,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x20++0x03
line.long 0x00 "TDG1_TDG_CHnDO0OFS0,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0x24++0x03
line.long 0x00 "TDG1_TDG_CHnDO1OFS0,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0x28++0x03
line.long 0x00 "TDG1_TDG_CHnDO2OFS0,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0x2C++0x03
line.long 0x00 "TDG1_TDG_CHnDO3OFS0,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0x30++0x03
line.long 0x00 "TDG1_TDG_CHnDO4OFS0,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0x34++0x03
line.long 0x00 "TDG1_TDG_CHnDO5OFS0,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0x38++0x03
line.long 0x00 "TDG1_TDG_CHnDO6OFS0,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0x3C++0x03
line.long 0x00 "TDG1_TDG_CHnDO7OFS0,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0x40++0x03
line.long 0x00 "TDG1_TDG_CHnCDOINTDLY0,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0x44++0x03
line.long 0x00 "TDG1_TDG_CHnCTRL1,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x48++0x03
line.long 0x00 "TDG1_TDG_CHnDO0OFS1,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0x4C++0x03
line.long 0x00 "TDG1_TDG_CHnDO1OFS1,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0x50++0x03
line.long 0x00 "TDG1_TDG_CHnDO2OFS1,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0x54++0x03
line.long 0x00 "TDG1_TDG_CHnDO3OFS1,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0x58++0x03
line.long 0x00 "TDG1_TDG_CHnDO4OFS1,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0x5C++0x03
line.long 0x00 "TDG1_TDG_CHnDO5OFS1,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0x60++0x03
line.long 0x00 "TDG1_TDG_CHnDO6OFS1,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0x64++0x03
line.long 0x00 "TDG1_TDG_CHnDO7OFS1,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0x68++0x03
line.long 0x00 "TDG1_TDG_CHnCDOINTDLY1,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0x6C++0x03
line.long 0x00 "TDG1_TDG_CHnCTRL2,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x70++0x03
line.long 0x00 "TDG1_TDG_CHnDO0OFS2,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0x74++0x03
line.long 0x00 "TDG1_TDG_CHnDO1OFS2,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0x78++0x03
line.long 0x00 "TDG1_TDG_CHnDO2OFS2,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0x7C++0x03
line.long 0x00 "TDG1_TDG_CHnDO3OFS2,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0x80++0x03
line.long 0x00 "TDG1_TDG_CHnDO4OFS2,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0x84++0x03
line.long 0x00 "TDG1_TDG_CHnDO5OFS2,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0x88++0x03
line.long 0x00 "TDG1_TDG_CHnDO6OFS2,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0x8C++0x03
line.long 0x00 "TDG1_TDG_CHnDO7OFS2,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0x90++0x03
line.long 0x00 "TDG1_TDG_CHnCDOINTDLY2,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0x94++0x03
line.long 0x00 "TDG1_TDG_CHnCTRL3,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0x98++0x03
line.long 0x00 "TDG1_TDG_CHnDO0OFS3,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0x9C++0x03
line.long 0x00 "TDG1_TDG_CHnDO1OFS3,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0xA0++0x03
line.long 0x00 "TDG1_TDG_CHnDO2OFS3,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0xA4++0x03
line.long 0x00 "TDG1_TDG_CHnDO3OFS3,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0xA8++0x03
line.long 0x00 "TDG1_TDG_CHnDO4OFS3,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0xAC++0x03
line.long 0x00 "TDG1_TDG_CHnDO5OFS3,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0xB0++0x03
line.long 0x00 "TDG1_TDG_CHnDO6OFS3,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0xB4++0x03
line.long 0x00 "TDG1_TDG_CHnDO7OFS3,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0xB8++0x03
line.long 0x00 "TDG1_TDG_CHnCDOINTDLY3,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0xBC++0x03
line.long 0x00 "TDG1_TDG_CHnCTRL4,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xC0++0x03
line.long 0x00 "TDG1_TDG_CHnDO0OFS4,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0xC4++0x03
line.long 0x00 "TDG1_TDG_CHnDO1OFS4,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0xC8++0x03
line.long 0x00 "TDG1_TDG_CHnDO2OFS4,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0xCC++0x03
line.long 0x00 "TDG1_TDG_CHnDO3OFS4,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0xD0++0x03
line.long 0x00 "TDG1_TDG_CHnDO4OFS4,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0xD4++0x03
line.long 0x00 "TDG1_TDG_CHnDO5OFS4,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0xD8++0x03
line.long 0x00 "TDG1_TDG_CHnDO6OFS4,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0xDC++0x03
line.long 0x00 "TDG1_TDG_CHnDO7OFS4,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0xE0++0x03
line.long 0x00 "TDG1_TDG_CHnCDOINTDLY4,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
group.long 0xE4++0x03
line.long 0x00 "TDG1_TDG_CHnCTRL5,TDG Channel n Control Register(TDG_CHnCTRL)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "DO7E,Delay output 7 enable on channel n" "0,1"
bitfld.long 0x00 14. "DO6E,Delay output 6 enable on channel n" "0,1"
bitfld.long 0x00 13. "DO5E,Delay output 5 enable on channel n" "0,1"
bitfld.long 0x00 12. "DO4E,Delay output 4 enable on channel n" "0,1"
bitfld.long 0x00 11. "DO3E,Delay output 3 enable on channel n" "0,1"
bitfld.long 0x00 10. "DO2E,Delay output 2 enable on channel n" "0,1"
bitfld.long 0x00 9. "DO1E,Delay output 1 enable on channel n" "0,1"
newline
bitfld.long 0x00 8. "DO0E,Delay output 0 enable on channel n" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RSVD_7_0,Reserved"
group.long 0xE8++0x03
line.long 0x00 "TDG1_TDG_CHnDO0OFS5,TDG Channel n Delay Output 0 Offset Register(TDG_CHnDO0OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO0OFS,TDG Delay Output 0 Offset"
group.long 0xEC++0x03
line.long 0x00 "TDG1_TDG_CHnDO1OFS5,TDG Channel n Delay Output 1 Offset Register(TDG_CHnDO1OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO1OFS,TDG Delay Output 1 Offset"
group.long 0xF0++0x03
line.long 0x00 "TDG1_TDG_CHnDO2OFS5,TDG Channel n Delay Output 2 Offset Register(TDG_CHnDO2OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO2OFS,TDG Delay Output 2 Offset"
group.long 0xF4++0x03
line.long 0x00 "TDG1_TDG_CHnDO3OFS5,TDG Channel n Delay Output 3 Offset Register(TDG_CHnDO3OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO3OFS,TDG Delay Output 3 Offset"
group.long 0xF8++0x03
line.long 0x00 "TDG1_TDG_CHnDO4OFS5,TDG Channel n Delay Output 4 Offset Register(TDG_CHnDO4OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO4OFS,TDG Delay Output 4 Offset"
group.long 0xFC++0x03
line.long 0x00 "TDG1_TDG_CHnDO5OFS5,TDG Channel n Delay Output 5 Offset Register(TDG_CHnDO5OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO5OFS,TDG Delay Output 5 Offset"
group.long 0x100++0x03
line.long 0x00 "TDG1_TDG_CHnDO6OFS5,TDG Channel n Delay Output 6 Offset Register(TDG_CHnDO6OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO6OFS,TDG Delay Output 6 Offset"
group.long 0x104++0x03
line.long 0x00 "TDG1_TDG_CHnDO7OFS5,TDG Channel n Delay Output 7 Offset Register(TDG_CHnDO7OFS)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "DO7OFS,TDG Delay Output 7 Offset"
group.long 0x108++0x03
line.long 0x00 "TDG1_TDG_CHnCDOINTDLY5,TDG Channel n Complete Delay Output Interrupt Delay Register(TDG_CHnCDOINTDLY)"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "LDCO,CDO Interrupt Delay Configuration Load Complete" "0,1"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x00 0.--9. 1. "CDOINTDLY,TDG Complete Delay Output Interrupt Delay"
tree.end
tree.end
tree "TIM"
tree "TIM0"
base ad:0x4000C000
group.long 0x00++0x03
line.long 0x00 "TIM0_TIM_TIMEBASE,TIM timebase register(TIM_TIMEBASE)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 5.--6. "DBGM,Debug mode" "0,1,2,3"
bitfld.long 0x00 2.--4. "PSDIV,Prescaler divider" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--1. "CKSRC,clock source" "0,1,2,3"
group.long 0x04++0x03
line.long 0x00 "TIM0_TIM_CNT,TIM counter register(TIM_CNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNT,16-bit counter"
group.long 0x08++0x03
line.long 0x00 "TIM0_TIM_CNTINIT,TIM counter initial value register(TIM_CNTINIT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNTINIT,16-bit counter initial value"
group.long 0x0C++0x03
line.long 0x00 "TIM0_TIM_MOD,TIM counter modulo value register(TIM_MOD)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "MOD,16-bit counter modulo value"
group.long 0x10++0x03
line.long 0x00 "TIM0_TIM_GLBCR,TIM global control register(TIM_GLBCR)"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
bitfld.long 0x00 11. "INIT,Initialize the channels output" "0,1"
bitfld.long 0x00 10. "CNTMODE,16-bit counter counting mode" "0,1"
bitfld.long 0x00 9. "TOIE,Timer overflow interrupt enable" "0,1"
bitfld.long 0x00 8. "RLDIE,Reload interrupt enable" "0,1"
bitfld.long 0x00 7. "CHOE7,Channel 7 output enable" "0,1"
bitfld.long 0x00 6. "CHOE6,Channel 6 output enable" "0,1"
bitfld.long 0x00 5. "CHOE5,Channel 5 output enable" "0,1"
newline
bitfld.long 0x00 4. "CHOE4,Channel 4 output enable" "0,1"
bitfld.long 0x00 3. "CHOE3,Channel 3 output enable" "0,1"
bitfld.long 0x00 2. "CHOE2,Channel 2 output enable" "0,1"
bitfld.long 0x00 1. "CHOE1,Channel 1 output enable" "0,1"
bitfld.long 0x00 0. "CHOE0,Channel 0 output enable" "0,1"
group.long 0x14++0x03
line.long 0x00 "TIM0_TIM_GLBSR,TIM global status register(TIM_GLBSR)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "WPDIS,Write protection disable" "0,1"
bitfld.long 0x00 9. "TOF,Timer overflow flag" "0,1"
bitfld.long 0x00 8. "RLDF,Reload flag" "0,1"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "0,1"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "0,1"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "0,1"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "0,1"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "0,1"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "0,1"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "0,1"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "0,1"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x18)++0x03
line.long 0x00 "TIM0_TIM_CMCn$1,TIM channel n mode configuration register(TIM_CMCn)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "ICRST,Input capture reset" "0,1"
bitfld.long 0x00 6. "DMA,DMA enable" "0,1"
bitfld.long 0x00 5. "CHF,Channel flag" "0,1"
bitfld.long 0x00 4. "CHIE,Channel interrupt enable" "0,1"
bitfld.long 0x00 2.--3. "CMS,Channel mode select" "0,1,2,3"
bitfld.long 0x00 0.--1. "ELS,Edge or level select" "0,1,2,3"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x38)++0x03
line.long 0x00 "TIM0_TIM_CCVn$1,TIM channel n capture/compare value register(TIM_CCVn)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CCV,Channel capture/compare value"
repeat.end
group.long 0x58++0x03
line.long 0x00 "TIM0_TIM_OUTCR,TIM output control register(TIM_OUTCR)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 25. "TRIGF,Channel output trigger flag" "0,1"
bitfld.long 0x00 24. "INITRIGE,Initialization trigger enable" "0,1"
bitfld.long 0x00 23. "TRIGE7,Channel 7 match trigger enable" "0,1"
bitfld.long 0x00 22. "TRIGE6,Channel 6 match trigger enable" "0,1"
bitfld.long 0x00 21. "TRIGE5,Channel 5 match trigger enable" "0,1"
bitfld.long 0x00 20. "TRIGE4,Channel 4 match trigger enable" "0,1"
bitfld.long 0x00 19. "TRIGE3,Channel 3 match trigger enable" "0,1"
newline
bitfld.long 0x00 18. "TRIGE2,Channel 2 match trigger enable" "0,1"
bitfld.long 0x00 17. "TRIGE1,Channel 1 match trigger enable" "0,1"
bitfld.long 0x00 16. "TRIGE0,Channel 0 match trigger enable" "0,1"
bitfld.long 0x00 15. "POL7,Channel 7 output polarity" "0,1"
bitfld.long 0x00 14. "POL6,Channel 6 output polarity" "0,1"
bitfld.long 0x00 13. "POL5,Channel 5 output polarity" "0,1"
bitfld.long 0x00 12. "POL4,Channel 4 output polarity" "0,1"
bitfld.long 0x00 11. "POL3,Channel 3 output polarity" "0,1"
newline
bitfld.long 0x00 10. "POL2,Channel 2 output polarity" "0,1"
bitfld.long 0x00 9. "POL1,Channel 1 output polarity" "0,1"
bitfld.long 0x00 8. "POL0,Channel 0 output polarity" "0,1"
bitfld.long 0x00 7. "INIT7,Channel 7 initialization value" "0,1"
bitfld.long 0x00 6. "INIT6,Channel 6 initialization value" "0,1"
bitfld.long 0x00 5. "INIT5,Channel 5 initialization value" "0,1"
bitfld.long 0x00 4. "INIT4,Channel 4 initialization value" "0,1"
bitfld.long 0x00 3. "INIT3,Channel 3 initialization value" "0,1"
newline
bitfld.long 0x00 2. "INIT2,Channel 2 initialization value" "0,1"
bitfld.long 0x00 1. "INIT1,Channel 1 initialization value" "0,1"
bitfld.long 0x00 0. "INIT0,Channel 0 initialization value" "0,1"
group.long 0x5C++0x03
line.long 0x00 "TIM0_TIM_OUTSWCR,TIM channel output software control register(TIM_OUTSWCR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "CH7OCV,Channel 7 output software control value" "0,1"
bitfld.long 0x00 14. "CH6OCV,Channel 6 output software control value" "0,1"
bitfld.long 0x00 13. "CH5OCV,Channel 5 output software control value" "0,1"
bitfld.long 0x00 12. "CH4OCV,Channel 4 output software control value" "0,1"
bitfld.long 0x00 11. "CH3OCV,Channel 3 output software control value" "0,1"
bitfld.long 0x00 10. "CH2OCV,Channel 2 output software control value" "0,1"
bitfld.long 0x00 9. "CH1OCV,Channel 1 output software control value" "0,1"
newline
bitfld.long 0x00 8. "CH0OCV,Channel 0 output software control value" "0,1"
bitfld.long 0x00 7. "CH7OC,Channel 7 output software control enable" "0,1"
bitfld.long 0x00 6. "CH6OC,Channel 6 output software control enable" "0,1"
bitfld.long 0x00 5. "CH5OC,Channel 5 output software control enable" "0,1"
bitfld.long 0x00 4. "CH4OC,Channel 4 output software control enable" "0,1"
bitfld.long 0x00 3. "CH3OC,Channel 3 output software control enable" "0,1"
bitfld.long 0x00 2. "CH2OC,Channel 2 output software control enable" "0,1"
bitfld.long 0x00 1. "CH1OC,Channel 1 output software control enable" "0,1"
newline
bitfld.long 0x00 0. "CH0OC,Channel 0 output software control enable" "0,1"
group.long 0x60++0x03
line.long 0x00 "TIM0_TIM_PCR,TIM pairs of channel control register(TIM_PCR)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 29. "DECAP3,Dual edge capture mode for pairs of channel 3" "0,1"
bitfld.long 0x00 28. "DECAPEN3,Dual edge capture enable for pairs of channel 3" "0,1"
bitfld.long 0x00 27. "SYNCEN3,Synchronization enable for pairs of channel 3" "0,1"
bitfld.long 0x00 26. "COMB3,Combine enable for pairs of channel 3" "0,1"
bitfld.long 0x00 25. "DTEN3,Deadtime insertion enable for pairs of channel 3" "0,1"
bitfld.long 0x00 24. "FCTLEN3,Fault control enabled for pairs of channel 3" "0,1"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 21. "DECAP2,Dual edge capture mode for pairs of channel 2" "0,1"
bitfld.long 0x00 20. "DECAPEN2,Dual edge capture enable for pairs of channel 2" "0,1"
bitfld.long 0x00 19. "SYNCEN2,Synchronization enable for pairs of channel 2" "0,1"
bitfld.long 0x00 18. "COMB2,Combine enable for pairs of channel 2" "0,1"
bitfld.long 0x00 17. "DTEN2,Deadtime insertion enable for pairs of channel 2" "0,1"
bitfld.long 0x00 16. "FCTLEN2,Fault control enabled for pairs of channel 2" "0,1"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "DECAP1,Dual edge capture mode for pairs of channel 1" "0,1"
newline
bitfld.long 0x00 12. "DECAPEN1,Dual edge capture enable for pairs of channel 1" "0,1"
bitfld.long 0x00 11. "SYNCEN1,Synchronization enable for pairs of channel 1" "0,1"
bitfld.long 0x00 10. "COMB1,Combine enable for pairs of channel 1" "0,1"
bitfld.long 0x00 9. "DTEN1,Deadtime insertion enable for pairs of channel 1" "0,1"
bitfld.long 0x00 8. "FCTLEN1,Fault control enabled for pairs of channel 1" "0,1"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "DECAP0,Dual edge capture mode for pairs of channel 0" "0,1"
bitfld.long 0x00 4. "DECAPEN0,Dual edge capture enable for pairs of channel 0" "0,1"
newline
bitfld.long 0x00 3. "SYNCEN0,Synchronization enable for pairs of channel 0" "0,1"
bitfld.long 0x00 2. "COMB0,Combine enable for pairs of channel 0" "0,1"
bitfld.long 0x00 1. "DTEN0,Deadtime insertion enable for pairs of channel 0" "0,1"
bitfld.long 0x00 0. "FCTLEN0,Fault control enabled for pairs of channel 0" "0,1"
group.long 0x64++0x03
line.long 0x00 "TIM0_TIM_FILTER,TIM input filter register(TIM_FILTER)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 18.--23. "DTVAL,Deadtime insertion value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DTPS,Deadtime prescaler value" "0,1,2,3"
bitfld.long 0x00 12.--15. "FILVAL3,Channel 3 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "FILVAL2,Channel 2 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "FILVAL1,Channel 1 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "FILVAL0,Channel 0 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x68++0x03
line.long 0x00 "TIM0_TIM_FLTCR,TIM fault control register(TIM_FLTCR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "FSTATE,Fault output status" "0,1"
bitfld.long 0x00 11.--14. "FIFVAL,Fault input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 9.--10. "RSVD_10_9,Reserved" "0,1,2,3"
bitfld.long 0x00 8. "FLTCM,Falut clear mode" "0,1"
bitfld.long 0x00 7. "FLTCEN,Falut control enable" "0,1"
bitfld.long 0x00 6. "FLTIE,Fault interrupt enable" "0,1"
bitfld.long 0x00 5. "FLTPOL1,Fault input channel 1 polarity" "0,1"
newline
bitfld.long 0x00 4. "FIFEN1,Fault input filter enable 1" "0,1"
bitfld.long 0x00 3. "FAULTEN1,Fault input enable 1" "0,1"
bitfld.long 0x00 2. "FLTPOL0,Fault input channel 0 polarity" "0,1"
bitfld.long 0x00 1. "FIFEN0,Fault input filter enable 0" "0,1"
bitfld.long 0x00 0. "FAULTEN0,Fault input enable 0" "0,1"
group.long 0x6C++0x03
line.long 0x00 "TIM0_TIM_FLTSR,TIM fault status register(TIM_FLTSR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "WPEN,Write protection enable" "0,1"
bitfld.long 0x00 5. "FAULTIN,Fault inputs value" "0,1"
bitfld.long 0x00 4. "FAULTF,Fault detection flag" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 1. "FAULTF1,Fault detection flag of fault channel 1" "0,1"
bitfld.long 0x00 0. "FAULTF0,Fault detection flag of fault channel 0" "0,1"
group.long 0x70++0x03
line.long 0x00 "TIM0_TIM_SYNC,TIM synchronization register(TIM_SYNC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "SWRSTCNT,Software trigger activate CNT register synchronization" "0,1"
bitfld.long 0x00 18. "SWWRBUF,Software trigger activate write buffer synchronization" "0,1"
hexmask.long.byte 0x00 10.--17. 1. "RSVD_17_10,Reserved"
bitfld.long 0x00 9. "SYNCOSWC,OUTSWCR register synchronization" "0,1"
bitfld.long 0x00 8. "SYNCINIT,CNTINIT register synchronization" "0,1"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "SWTRIG,PWM synchronization software trigger" "0,1"
group.long 0x74++0x03
line.long 0x00 "TIM0_TIM_RELOAD,TIM reload register(TIM_RELOAD)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 16.--20. "LDFREQ,Reload frequency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "HCSEL,Half cycle reload select" "0,1"
bitfld.long 0x00 9.--10. "RSVD_10_9,Reserved" "0,1,2,3"
bitfld.long 0x00 8. "LOADEN,Reload enable" "0,1"
bitfld.long 0x00 7. "CH7SEL,Channel 7 select" "0,1"
bitfld.long 0x00 6. "CH6SEL,Channel 6 select" "0,1"
newline
bitfld.long 0x00 5. "CH5SEL,Channel 5 select" "0,1"
bitfld.long 0x00 4. "CH4SEL,Channel 4 select" "0,1"
bitfld.long 0x00 3. "CH3SEL,Channel 3 select" "0,1"
bitfld.long 0x00 2. "CH2SEL,Channel 2 select" "0,1"
bitfld.long 0x00 1. "CH1SEL,Channel 1 select" "0,1"
bitfld.long 0x00 0. "CH0SEL,Channel 0 select" "0,1"
group.long 0x78++0x03
line.long 0x00 "TIM0_TIM_HCV,TIM half cycle reload value register(TIM_HCV)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "HCV,Half cycle reload value"
tree.end
tree "TIM1"
base ad:0x4000D000
group.long 0x00++0x03
line.long 0x00 "TIM1_TIM_TIMEBASE,TIM timebase register(TIM_TIMEBASE)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 5.--6. "DBGM,Debug mode" "0,1,2,3"
bitfld.long 0x00 2.--4. "PSDIV,Prescaler divider" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--1. "CKSRC,clock source" "0,1,2,3"
group.long 0x04++0x03
line.long 0x00 "TIM1_TIM_CNT,TIM counter register(TIM_CNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNT,16-bit counter"
group.long 0x08++0x03
line.long 0x00 "TIM1_TIM_CNTINIT,TIM counter initial value register(TIM_CNTINIT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNTINIT,16-bit counter initial value"
group.long 0x0C++0x03
line.long 0x00 "TIM1_TIM_MOD,TIM counter modulo value register(TIM_MOD)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "MOD,16-bit counter modulo value"
group.long 0x10++0x03
line.long 0x00 "TIM1_TIM_GLBCR,TIM global control register(TIM_GLBCR)"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
bitfld.long 0x00 11. "INIT,Initialize the channels output" "0,1"
bitfld.long 0x00 10. "CNTMODE,16-bit counter counting mode" "0,1"
bitfld.long 0x00 9. "TOIE,Timer overflow interrupt enable" "0,1"
bitfld.long 0x00 8. "RLDIE,Reload interrupt enable" "0,1"
bitfld.long 0x00 7. "CHOE7,Channel 7 output enable" "0,1"
bitfld.long 0x00 6. "CHOE6,Channel 6 output enable" "0,1"
bitfld.long 0x00 5. "CHOE5,Channel 5 output enable" "0,1"
newline
bitfld.long 0x00 4. "CHOE4,Channel 4 output enable" "0,1"
bitfld.long 0x00 3. "CHOE3,Channel 3 output enable" "0,1"
bitfld.long 0x00 2. "CHOE2,Channel 2 output enable" "0,1"
bitfld.long 0x00 1. "CHOE1,Channel 1 output enable" "0,1"
bitfld.long 0x00 0. "CHOE0,Channel 0 output enable" "0,1"
group.long 0x14++0x03
line.long 0x00 "TIM1_TIM_GLBSR,TIM global status register(TIM_GLBSR)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "WPDIS,Write protection disable" "0,1"
bitfld.long 0x00 9. "TOF,Timer overflow flag" "0,1"
bitfld.long 0x00 8. "RLDF,Reload flag" "0,1"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "0,1"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "0,1"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "0,1"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "0,1"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "0,1"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "0,1"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "0,1"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "0,1"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x18)++0x03
line.long 0x00 "TIM1_TIM_CMCn$1,TIM channel n mode configuration register(TIM_CMCn)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "ICRST,Input capture reset" "0,1"
bitfld.long 0x00 6. "DMA,DMA enable" "0,1"
bitfld.long 0x00 5. "CHF,Channel flag" "0,1"
bitfld.long 0x00 4. "CHIE,Channel interrupt enable" "0,1"
bitfld.long 0x00 2.--3. "CMS,Channel mode select" "0,1,2,3"
bitfld.long 0x00 0.--1. "ELS,Edge or level select" "0,1,2,3"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x38)++0x03
line.long 0x00 "TIM1_TIM_CCVn$1,TIM channel n capture/compare value register(TIM_CCVn)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CCV,Channel capture/compare value"
repeat.end
group.long 0x58++0x03
line.long 0x00 "TIM1_TIM_OUTCR,TIM output control register(TIM_OUTCR)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 25. "TRIGF,Channel output trigger flag" "0,1"
bitfld.long 0x00 24. "INITRIGE,Initialization trigger enable" "0,1"
bitfld.long 0x00 23. "TRIGE7,Channel 7 match trigger enable" "0,1"
bitfld.long 0x00 22. "TRIGE6,Channel 6 match trigger enable" "0,1"
bitfld.long 0x00 21. "TRIGE5,Channel 5 match trigger enable" "0,1"
bitfld.long 0x00 20. "TRIGE4,Channel 4 match trigger enable" "0,1"
bitfld.long 0x00 19. "TRIGE3,Channel 3 match trigger enable" "0,1"
newline
bitfld.long 0x00 18. "TRIGE2,Channel 2 match trigger enable" "0,1"
bitfld.long 0x00 17. "TRIGE1,Channel 1 match trigger enable" "0,1"
bitfld.long 0x00 16. "TRIGE0,Channel 0 match trigger enable" "0,1"
bitfld.long 0x00 15. "POL7,Channel 7 output polarity" "0,1"
bitfld.long 0x00 14. "POL6,Channel 6 output polarity" "0,1"
bitfld.long 0x00 13. "POL5,Channel 5 output polarity" "0,1"
bitfld.long 0x00 12. "POL4,Channel 4 output polarity" "0,1"
bitfld.long 0x00 11. "POL3,Channel 3 output polarity" "0,1"
newline
bitfld.long 0x00 10. "POL2,Channel 2 output polarity" "0,1"
bitfld.long 0x00 9. "POL1,Channel 1 output polarity" "0,1"
bitfld.long 0x00 8. "POL0,Channel 0 output polarity" "0,1"
bitfld.long 0x00 7. "INIT7,Channel 7 initialization value" "0,1"
bitfld.long 0x00 6. "INIT6,Channel 6 initialization value" "0,1"
bitfld.long 0x00 5. "INIT5,Channel 5 initialization value" "0,1"
bitfld.long 0x00 4. "INIT4,Channel 4 initialization value" "0,1"
bitfld.long 0x00 3. "INIT3,Channel 3 initialization value" "0,1"
newline
bitfld.long 0x00 2. "INIT2,Channel 2 initialization value" "0,1"
bitfld.long 0x00 1. "INIT1,Channel 1 initialization value" "0,1"
bitfld.long 0x00 0. "INIT0,Channel 0 initialization value" "0,1"
group.long 0x5C++0x03
line.long 0x00 "TIM1_TIM_OUTSWCR,TIM channel output software control register(TIM_OUTSWCR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "CH7OCV,Channel 7 output software control value" "0,1"
bitfld.long 0x00 14. "CH6OCV,Channel 6 output software control value" "0,1"
bitfld.long 0x00 13. "CH5OCV,Channel 5 output software control value" "0,1"
bitfld.long 0x00 12. "CH4OCV,Channel 4 output software control value" "0,1"
bitfld.long 0x00 11. "CH3OCV,Channel 3 output software control value" "0,1"
bitfld.long 0x00 10. "CH2OCV,Channel 2 output software control value" "0,1"
bitfld.long 0x00 9. "CH1OCV,Channel 1 output software control value" "0,1"
newline
bitfld.long 0x00 8. "CH0OCV,Channel 0 output software control value" "0,1"
bitfld.long 0x00 7. "CH7OC,Channel 7 output software control enable" "0,1"
bitfld.long 0x00 6. "CH6OC,Channel 6 output software control enable" "0,1"
bitfld.long 0x00 5. "CH5OC,Channel 5 output software control enable" "0,1"
bitfld.long 0x00 4. "CH4OC,Channel 4 output software control enable" "0,1"
bitfld.long 0x00 3. "CH3OC,Channel 3 output software control enable" "0,1"
bitfld.long 0x00 2. "CH2OC,Channel 2 output software control enable" "0,1"
bitfld.long 0x00 1. "CH1OC,Channel 1 output software control enable" "0,1"
newline
bitfld.long 0x00 0. "CH0OC,Channel 0 output software control enable" "0,1"
group.long 0x60++0x03
line.long 0x00 "TIM1_TIM_PCR,TIM pairs of channel control register(TIM_PCR)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 29. "DECAP3,Dual edge capture mode for pairs of channel 3" "0,1"
bitfld.long 0x00 28. "DECAPEN3,Dual edge capture enable for pairs of channel 3" "0,1"
bitfld.long 0x00 27. "SYNCEN3,Synchronization enable for pairs of channel 3" "0,1"
bitfld.long 0x00 26. "COMB3,Combine enable for pairs of channel 3" "0,1"
bitfld.long 0x00 25. "DTEN3,Deadtime insertion enable for pairs of channel 3" "0,1"
bitfld.long 0x00 24. "FCTLEN3,Fault control enabled for pairs of channel 3" "0,1"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 21. "DECAP2,Dual edge capture mode for pairs of channel 2" "0,1"
bitfld.long 0x00 20. "DECAPEN2,Dual edge capture enable for pairs of channel 2" "0,1"
bitfld.long 0x00 19. "SYNCEN2,Synchronization enable for pairs of channel 2" "0,1"
bitfld.long 0x00 18. "COMB2,Combine enable for pairs of channel 2" "0,1"
bitfld.long 0x00 17. "DTEN2,Deadtime insertion enable for pairs of channel 2" "0,1"
bitfld.long 0x00 16. "FCTLEN2,Fault control enabled for pairs of channel 2" "0,1"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "DECAP1,Dual edge capture mode for pairs of channel 1" "0,1"
newline
bitfld.long 0x00 12. "DECAPEN1,Dual edge capture enable for pairs of channel 1" "0,1"
bitfld.long 0x00 11. "SYNCEN1,Synchronization enable for pairs of channel 1" "0,1"
bitfld.long 0x00 10. "COMB1,Combine enable for pairs of channel 1" "0,1"
bitfld.long 0x00 9. "DTEN1,Deadtime insertion enable for pairs of channel 1" "0,1"
bitfld.long 0x00 8. "FCTLEN1,Fault control enabled for pairs of channel 1" "0,1"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "DECAP0,Dual edge capture mode for pairs of channel 0" "0,1"
bitfld.long 0x00 4. "DECAPEN0,Dual edge capture enable for pairs of channel 0" "0,1"
newline
bitfld.long 0x00 3. "SYNCEN0,Synchronization enable for pairs of channel 0" "0,1"
bitfld.long 0x00 2. "COMB0,Combine enable for pairs of channel 0" "0,1"
bitfld.long 0x00 1. "DTEN0,Deadtime insertion enable for pairs of channel 0" "0,1"
bitfld.long 0x00 0. "FCTLEN0,Fault control enabled for pairs of channel 0" "0,1"
group.long 0x64++0x03
line.long 0x00 "TIM1_TIM_FILTER,TIM input filter register(TIM_FILTER)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 18.--23. "DTVAL,Deadtime insertion value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DTPS,Deadtime prescaler value" "0,1,2,3"
bitfld.long 0x00 12.--15. "FILVAL3,Channel 3 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "FILVAL2,Channel 2 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "FILVAL1,Channel 1 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "FILVAL0,Channel 0 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x68++0x03
line.long 0x00 "TIM1_TIM_FLTCR,TIM fault control register(TIM_FLTCR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "FSTATE,Fault output status" "0,1"
bitfld.long 0x00 11.--14. "FIFVAL,Fault input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 9.--10. "RSVD_10_9,Reserved" "0,1,2,3"
bitfld.long 0x00 8. "FLTCM,Falut clear mode" "0,1"
bitfld.long 0x00 7. "FLTCEN,Falut control enable" "0,1"
bitfld.long 0x00 6. "FLTIE,Fault interrupt enable" "0,1"
bitfld.long 0x00 5. "FLTPOL1,Fault input channel 1 polarity" "0,1"
newline
bitfld.long 0x00 4. "FIFEN1,Fault input filter enable 1" "0,1"
bitfld.long 0x00 3. "FAULTEN1,Fault input enable 1" "0,1"
bitfld.long 0x00 2. "FLTPOL0,Fault input channel 0 polarity" "0,1"
bitfld.long 0x00 1. "FIFEN0,Fault input filter enable 0" "0,1"
bitfld.long 0x00 0. "FAULTEN0,Fault input enable 0" "0,1"
group.long 0x6C++0x03
line.long 0x00 "TIM1_TIM_FLTSR,TIM fault status register(TIM_FLTSR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "WPEN,Write protection enable" "0,1"
bitfld.long 0x00 5. "FAULTIN,Fault inputs value" "0,1"
bitfld.long 0x00 4. "FAULTF,Fault detection flag" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 1. "FAULTF1,Fault detection flag of fault channel 1" "0,1"
bitfld.long 0x00 0. "FAULTF0,Fault detection flag of fault channel 0" "0,1"
group.long 0x70++0x03
line.long 0x00 "TIM1_TIM_SYNC,TIM synchronization register(TIM_SYNC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "SWRSTCNT,Software trigger activate CNT register synchronization" "0,1"
bitfld.long 0x00 18. "SWWRBUF,Software trigger activate write buffer synchronization" "0,1"
hexmask.long.byte 0x00 10.--17. 1. "RSVD_17_10,Reserved"
bitfld.long 0x00 9. "SYNCOSWC,OUTSWCR register synchronization" "0,1"
bitfld.long 0x00 8. "SYNCINIT,CNTINIT register synchronization" "0,1"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "SWTRIG,PWM synchronization software trigger" "0,1"
group.long 0x74++0x03
line.long 0x00 "TIM1_TIM_RELOAD,TIM reload register(TIM_RELOAD)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 16.--20. "LDFREQ,Reload frequency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "HCSEL,Half cycle reload select" "0,1"
bitfld.long 0x00 9.--10. "RSVD_10_9,Reserved" "0,1,2,3"
bitfld.long 0x00 8. "LOADEN,Reload enable" "0,1"
bitfld.long 0x00 7. "CH7SEL,Channel 7 select" "0,1"
bitfld.long 0x00 6. "CH6SEL,Channel 6 select" "0,1"
newline
bitfld.long 0x00 5. "CH5SEL,Channel 5 select" "0,1"
bitfld.long 0x00 4. "CH4SEL,Channel 4 select" "0,1"
bitfld.long 0x00 3. "CH3SEL,Channel 3 select" "0,1"
bitfld.long 0x00 2. "CH2SEL,Channel 2 select" "0,1"
bitfld.long 0x00 1. "CH1SEL,Channel 1 select" "0,1"
bitfld.long 0x00 0. "CH0SEL,Channel 0 select" "0,1"
group.long 0x78++0x03
line.long 0x00 "TIM1_TIM_HCV,TIM half cycle reload value register(TIM_HCV)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "HCV,Half cycle reload value"
tree.end
tree "TIM2"
base ad:0x40018000
group.long 0x00++0x03
line.long 0x00 "TIM2_TIM_TIMEBASE,TIM timebase register(TIM_TIMEBASE)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 5.--6. "DBGM,Debug mode" "0,1,2,3"
bitfld.long 0x00 2.--4. "PSDIV,Prescaler divider" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--1. "CKSRC,clock source" "0,1,2,3"
group.long 0x04++0x03
line.long 0x00 "TIM2_TIM_CNT,TIM counter register(TIM_CNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNT,16-bit counter"
group.long 0x08++0x03
line.long 0x00 "TIM2_TIM_CNTINIT,TIM counter initial value register(TIM_CNTINIT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNTINIT,16-bit counter initial value"
group.long 0x0C++0x03
line.long 0x00 "TIM2_TIM_MOD,TIM counter modulo value register(TIM_MOD)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "MOD,16-bit counter modulo value"
group.long 0x10++0x03
line.long 0x00 "TIM2_TIM_GLBCR,TIM global control register(TIM_GLBCR)"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
bitfld.long 0x00 11. "INIT,Initialize the channels output" "0,1"
bitfld.long 0x00 10. "CNTMODE,16-bit counter counting mode" "0,1"
bitfld.long 0x00 9. "TOIE,Timer overflow interrupt enable" "0,1"
bitfld.long 0x00 8. "RLDIE,Reload interrupt enable" "0,1"
bitfld.long 0x00 7. "CHOE7,Channel 7 output enable" "0,1"
bitfld.long 0x00 6. "CHOE6,Channel 6 output enable" "0,1"
bitfld.long 0x00 5. "CHOE5,Channel 5 output enable" "0,1"
newline
bitfld.long 0x00 4. "CHOE4,Channel 4 output enable" "0,1"
bitfld.long 0x00 3. "CHOE3,Channel 3 output enable" "0,1"
bitfld.long 0x00 2. "CHOE2,Channel 2 output enable" "0,1"
bitfld.long 0x00 1. "CHOE1,Channel 1 output enable" "0,1"
bitfld.long 0x00 0. "CHOE0,Channel 0 output enable" "0,1"
group.long 0x14++0x03
line.long 0x00 "TIM2_TIM_GLBSR,TIM global status register(TIM_GLBSR)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "WPDIS,Write protection disable" "0,1"
bitfld.long 0x00 9. "TOF,Timer overflow flag" "0,1"
bitfld.long 0x00 8. "RLDF,Reload flag" "0,1"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "0,1"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "0,1"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "0,1"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "0,1"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "0,1"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "0,1"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "0,1"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "0,1"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x18)++0x03
line.long 0x00 "TIM2_TIM_CMCn$1,TIM channel n mode configuration register(TIM_CMCn)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "ICRST,Input capture reset" "0,1"
bitfld.long 0x00 6. "DMA,DMA enable" "0,1"
bitfld.long 0x00 5. "CHF,Channel flag" "0,1"
bitfld.long 0x00 4. "CHIE,Channel interrupt enable" "0,1"
bitfld.long 0x00 2.--3. "CMS,Channel mode select" "0,1,2,3"
bitfld.long 0x00 0.--1. "ELS,Edge or level select" "0,1,2,3"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x38)++0x03
line.long 0x00 "TIM2_TIM_CCVn$1,TIM channel n capture/compare value register(TIM_CCVn)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CCV,Channel capture/compare value"
repeat.end
group.long 0x58++0x03
line.long 0x00 "TIM2_TIM_OUTCR,TIM output control register(TIM_OUTCR)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 25. "TRIGF,Channel output trigger flag" "0,1"
bitfld.long 0x00 24. "INITRIGE,Initialization trigger enable" "0,1"
bitfld.long 0x00 23. "TRIGE7,Channel 7 match trigger enable" "0,1"
bitfld.long 0x00 22. "TRIGE6,Channel 6 match trigger enable" "0,1"
bitfld.long 0x00 21. "TRIGE5,Channel 5 match trigger enable" "0,1"
bitfld.long 0x00 20. "TRIGE4,Channel 4 match trigger enable" "0,1"
bitfld.long 0x00 19. "TRIGE3,Channel 3 match trigger enable" "0,1"
newline
bitfld.long 0x00 18. "TRIGE2,Channel 2 match trigger enable" "0,1"
bitfld.long 0x00 17. "TRIGE1,Channel 1 match trigger enable" "0,1"
bitfld.long 0x00 16. "TRIGE0,Channel 0 match trigger enable" "0,1"
bitfld.long 0x00 15. "POL7,Channel 7 output polarity" "0,1"
bitfld.long 0x00 14. "POL6,Channel 6 output polarity" "0,1"
bitfld.long 0x00 13. "POL5,Channel 5 output polarity" "0,1"
bitfld.long 0x00 12. "POL4,Channel 4 output polarity" "0,1"
bitfld.long 0x00 11. "POL3,Channel 3 output polarity" "0,1"
newline
bitfld.long 0x00 10. "POL2,Channel 2 output polarity" "0,1"
bitfld.long 0x00 9. "POL1,Channel 1 output polarity" "0,1"
bitfld.long 0x00 8. "POL0,Channel 0 output polarity" "0,1"
bitfld.long 0x00 7. "INIT7,Channel 7 initialization value" "0,1"
bitfld.long 0x00 6. "INIT6,Channel 6 initialization value" "0,1"
bitfld.long 0x00 5. "INIT5,Channel 5 initialization value" "0,1"
bitfld.long 0x00 4. "INIT4,Channel 4 initialization value" "0,1"
bitfld.long 0x00 3. "INIT3,Channel 3 initialization value" "0,1"
newline
bitfld.long 0x00 2. "INIT2,Channel 2 initialization value" "0,1"
bitfld.long 0x00 1. "INIT1,Channel 1 initialization value" "0,1"
bitfld.long 0x00 0. "INIT0,Channel 0 initialization value" "0,1"
group.long 0x5C++0x03
line.long 0x00 "TIM2_TIM_OUTSWCR,TIM channel output software control register(TIM_OUTSWCR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "CH7OCV,Channel 7 output software control value" "0,1"
bitfld.long 0x00 14. "CH6OCV,Channel 6 output software control value" "0,1"
bitfld.long 0x00 13. "CH5OCV,Channel 5 output software control value" "0,1"
bitfld.long 0x00 12. "CH4OCV,Channel 4 output software control value" "0,1"
bitfld.long 0x00 11. "CH3OCV,Channel 3 output software control value" "0,1"
bitfld.long 0x00 10. "CH2OCV,Channel 2 output software control value" "0,1"
bitfld.long 0x00 9. "CH1OCV,Channel 1 output software control value" "0,1"
newline
bitfld.long 0x00 8. "CH0OCV,Channel 0 output software control value" "0,1"
bitfld.long 0x00 7. "CH7OC,Channel 7 output software control enable" "0,1"
bitfld.long 0x00 6. "CH6OC,Channel 6 output software control enable" "0,1"
bitfld.long 0x00 5. "CH5OC,Channel 5 output software control enable" "0,1"
bitfld.long 0x00 4. "CH4OC,Channel 4 output software control enable" "0,1"
bitfld.long 0x00 3. "CH3OC,Channel 3 output software control enable" "0,1"
bitfld.long 0x00 2. "CH2OC,Channel 2 output software control enable" "0,1"
bitfld.long 0x00 1. "CH1OC,Channel 1 output software control enable" "0,1"
newline
bitfld.long 0x00 0. "CH0OC,Channel 0 output software control enable" "0,1"
group.long 0x60++0x03
line.long 0x00 "TIM2_TIM_PCR,TIM pairs of channel control register(TIM_PCR)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 29. "DECAP3,Dual edge capture mode for pairs of channel 3" "0,1"
bitfld.long 0x00 28. "DECAPEN3,Dual edge capture enable for pairs of channel 3" "0,1"
bitfld.long 0x00 27. "SYNCEN3,Synchronization enable for pairs of channel 3" "0,1"
bitfld.long 0x00 26. "COMB3,Combine enable for pairs of channel 3" "0,1"
bitfld.long 0x00 25. "DTEN3,Deadtime insertion enable for pairs of channel 3" "0,1"
bitfld.long 0x00 24. "FCTLEN3,Fault control enabled for pairs of channel 3" "0,1"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 21. "DECAP2,Dual edge capture mode for pairs of channel 2" "0,1"
bitfld.long 0x00 20. "DECAPEN2,Dual edge capture enable for pairs of channel 2" "0,1"
bitfld.long 0x00 19. "SYNCEN2,Synchronization enable for pairs of channel 2" "0,1"
bitfld.long 0x00 18. "COMB2,Combine enable for pairs of channel 2" "0,1"
bitfld.long 0x00 17. "DTEN2,Deadtime insertion enable for pairs of channel 2" "0,1"
bitfld.long 0x00 16. "FCTLEN2,Fault control enabled for pairs of channel 2" "0,1"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "DECAP1,Dual edge capture mode for pairs of channel 1" "0,1"
newline
bitfld.long 0x00 12. "DECAPEN1,Dual edge capture enable for pairs of channel 1" "0,1"
bitfld.long 0x00 11. "SYNCEN1,Synchronization enable for pairs of channel 1" "0,1"
bitfld.long 0x00 10. "COMB1,Combine enable for pairs of channel 1" "0,1"
bitfld.long 0x00 9. "DTEN1,Deadtime insertion enable for pairs of channel 1" "0,1"
bitfld.long 0x00 8. "FCTLEN1,Fault control enabled for pairs of channel 1" "0,1"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "DECAP0,Dual edge capture mode for pairs of channel 0" "0,1"
bitfld.long 0x00 4. "DECAPEN0,Dual edge capture enable for pairs of channel 0" "0,1"
newline
bitfld.long 0x00 3. "SYNCEN0,Synchronization enable for pairs of channel 0" "0,1"
bitfld.long 0x00 2. "COMB0,Combine enable for pairs of channel 0" "0,1"
bitfld.long 0x00 1. "DTEN0,Deadtime insertion enable for pairs of channel 0" "0,1"
bitfld.long 0x00 0. "FCTLEN0,Fault control enabled for pairs of channel 0" "0,1"
group.long 0x64++0x03
line.long 0x00 "TIM2_TIM_FILTER,TIM input filter register(TIM_FILTER)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 18.--23. "DTVAL,Deadtime insertion value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DTPS,Deadtime prescaler value" "0,1,2,3"
bitfld.long 0x00 12.--15. "FILVAL3,Channel 3 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "FILVAL2,Channel 2 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "FILVAL1,Channel 1 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "FILVAL0,Channel 0 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x68++0x03
line.long 0x00 "TIM2_TIM_FLTCR,TIM fault control register(TIM_FLTCR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "FSTATE,Fault output status" "0,1"
bitfld.long 0x00 11.--14. "FIFVAL,Fault input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 9.--10. "RSVD_10_9,Reserved" "0,1,2,3"
bitfld.long 0x00 8. "FLTCM,Falut clear mode" "0,1"
bitfld.long 0x00 7. "FLTCEN,Falut control enable" "0,1"
bitfld.long 0x00 6. "FLTIE,Fault interrupt enable" "0,1"
bitfld.long 0x00 5. "FLTPOL1,Fault input channel 1 polarity" "0,1"
newline
bitfld.long 0x00 4. "FIFEN1,Fault input filter enable 1" "0,1"
bitfld.long 0x00 3. "FAULTEN1,Fault input enable 1" "0,1"
bitfld.long 0x00 2. "FLTPOL0,Fault input channel 0 polarity" "0,1"
bitfld.long 0x00 1. "FIFEN0,Fault input filter enable 0" "0,1"
bitfld.long 0x00 0. "FAULTEN0,Fault input enable 0" "0,1"
group.long 0x6C++0x03
line.long 0x00 "TIM2_TIM_FLTSR,TIM fault status register(TIM_FLTSR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "WPEN,Write protection enable" "0,1"
bitfld.long 0x00 5. "FAULTIN,Fault inputs value" "0,1"
bitfld.long 0x00 4. "FAULTF,Fault detection flag" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 1. "FAULTF1,Fault detection flag of fault channel 1" "0,1"
bitfld.long 0x00 0. "FAULTF0,Fault detection flag of fault channel 0" "0,1"
group.long 0x70++0x03
line.long 0x00 "TIM2_TIM_SYNC,TIM synchronization register(TIM_SYNC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "SWRSTCNT,Software trigger activate CNT register synchronization" "0,1"
bitfld.long 0x00 18. "SWWRBUF,Software trigger activate write buffer synchronization" "0,1"
hexmask.long.byte 0x00 10.--17. 1. "RSVD_17_10,Reserved"
bitfld.long 0x00 9. "SYNCOSWC,OUTSWCR register synchronization" "0,1"
bitfld.long 0x00 8. "SYNCINIT,CNTINIT register synchronization" "0,1"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "SWTRIG,PWM synchronization software trigger" "0,1"
group.long 0x74++0x03
line.long 0x00 "TIM2_TIM_RELOAD,TIM reload register(TIM_RELOAD)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 16.--20. "LDFREQ,Reload frequency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "HCSEL,Half cycle reload select" "0,1"
bitfld.long 0x00 9.--10. "RSVD_10_9,Reserved" "0,1,2,3"
bitfld.long 0x00 8. "LOADEN,Reload enable" "0,1"
bitfld.long 0x00 7. "CH7SEL,Channel 7 select" "0,1"
bitfld.long 0x00 6. "CH6SEL,Channel 6 select" "0,1"
newline
bitfld.long 0x00 5. "CH5SEL,Channel 5 select" "0,1"
bitfld.long 0x00 4. "CH4SEL,Channel 4 select" "0,1"
bitfld.long 0x00 3. "CH3SEL,Channel 3 select" "0,1"
bitfld.long 0x00 2. "CH2SEL,Channel 2 select" "0,1"
bitfld.long 0x00 1. "CH1SEL,Channel 1 select" "0,1"
bitfld.long 0x00 0. "CH0SEL,Channel 0 select" "0,1"
group.long 0x78++0x03
line.long 0x00 "TIM2_TIM_HCV,TIM half cycle reload value register(TIM_HCV)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "HCV,Half cycle reload value"
tree.end
tree "TIM3"
base ad:0x40019000
group.long 0x00++0x03
line.long 0x00 "TIM3_TIM_TIMEBASE,TIM timebase register(TIM_TIMEBASE)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 5.--6. "DBGM,Debug mode" "0,1,2,3"
bitfld.long 0x00 2.--4. "PSDIV,Prescaler divider" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--1. "CKSRC,clock source" "0,1,2,3"
group.long 0x04++0x03
line.long 0x00 "TIM3_TIM_CNT,TIM counter register(TIM_CNT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNT,16-bit counter"
group.long 0x08++0x03
line.long 0x00 "TIM3_TIM_CNTINIT,TIM counter initial value register(TIM_CNTINIT)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CNTINIT,16-bit counter initial value"
group.long 0x0C++0x03
line.long 0x00 "TIM3_TIM_MOD,TIM counter modulo value register(TIM_MOD)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "MOD,16-bit counter modulo value"
group.long 0x10++0x03
line.long 0x00 "TIM3_TIM_GLBCR,TIM global control register(TIM_GLBCR)"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
bitfld.long 0x00 11. "INIT,Initialize the channels output" "0,1"
bitfld.long 0x00 10. "CNTMODE,16-bit counter counting mode" "0,1"
bitfld.long 0x00 9. "TOIE,Timer overflow interrupt enable" "0,1"
bitfld.long 0x00 8. "RLDIE,Reload interrupt enable" "0,1"
bitfld.long 0x00 7. "CHOE7,Channel 7 output enable" "0,1"
bitfld.long 0x00 6. "CHOE6,Channel 6 output enable" "0,1"
bitfld.long 0x00 5. "CHOE5,Channel 5 output enable" "0,1"
newline
bitfld.long 0x00 4. "CHOE4,Channel 4 output enable" "0,1"
bitfld.long 0x00 3. "CHOE3,Channel 3 output enable" "0,1"
bitfld.long 0x00 2. "CHOE2,Channel 2 output enable" "0,1"
bitfld.long 0x00 1. "CHOE1,Channel 1 output enable" "0,1"
bitfld.long 0x00 0. "CHOE0,Channel 0 output enable" "0,1"
group.long 0x14++0x03
line.long 0x00 "TIM3_TIM_GLBSR,TIM global status register(TIM_GLBSR)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "WPDIS,Write protection disable" "0,1"
bitfld.long 0x00 9. "TOF,Timer overflow flag" "0,1"
bitfld.long 0x00 8. "RLDF,Reload flag" "0,1"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "0,1"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "0,1"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "0,1"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "0,1"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "0,1"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "0,1"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "0,1"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "0,1"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x18)++0x03
line.long 0x00 "TIM3_TIM_CMCn$1,TIM channel n mode configuration register(TIM_CMCn)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 7. "ICRST,Input capture reset" "0,1"
bitfld.long 0x00 6. "DMA,DMA enable" "0,1"
bitfld.long 0x00 5. "CHF,Channel flag" "0,1"
bitfld.long 0x00 4. "CHIE,Channel interrupt enable" "0,1"
bitfld.long 0x00 2.--3. "CMS,Channel mode select" "0,1,2,3"
bitfld.long 0x00 0.--1. "ELS,Edge or level select" "0,1,2,3"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x38)++0x03
line.long 0x00 "TIM3_TIM_CCVn$1,TIM channel n capture/compare value register(TIM_CCVn)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "CCV,Channel capture/compare value"
repeat.end
group.long 0x58++0x03
line.long 0x00 "TIM3_TIM_OUTCR,TIM output control register(TIM_OUTCR)"
bitfld.long 0x00 26.--31. "RSVD_31_26,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 25. "TRIGF,Channel output trigger flag" "0,1"
bitfld.long 0x00 24. "INITRIGE,Initialization trigger enable" "0,1"
bitfld.long 0x00 23. "TRIGE7,Channel 7 match trigger enable" "0,1"
bitfld.long 0x00 22. "TRIGE6,Channel 6 match trigger enable" "0,1"
bitfld.long 0x00 21. "TRIGE5,Channel 5 match trigger enable" "0,1"
bitfld.long 0x00 20. "TRIGE4,Channel 4 match trigger enable" "0,1"
bitfld.long 0x00 19. "TRIGE3,Channel 3 match trigger enable" "0,1"
newline
bitfld.long 0x00 18. "TRIGE2,Channel 2 match trigger enable" "0,1"
bitfld.long 0x00 17. "TRIGE1,Channel 1 match trigger enable" "0,1"
bitfld.long 0x00 16. "TRIGE0,Channel 0 match trigger enable" "0,1"
bitfld.long 0x00 15. "POL7,Channel 7 output polarity" "0,1"
bitfld.long 0x00 14. "POL6,Channel 6 output polarity" "0,1"
bitfld.long 0x00 13. "POL5,Channel 5 output polarity" "0,1"
bitfld.long 0x00 12. "POL4,Channel 4 output polarity" "0,1"
bitfld.long 0x00 11. "POL3,Channel 3 output polarity" "0,1"
newline
bitfld.long 0x00 10. "POL2,Channel 2 output polarity" "0,1"
bitfld.long 0x00 9. "POL1,Channel 1 output polarity" "0,1"
bitfld.long 0x00 8. "POL0,Channel 0 output polarity" "0,1"
bitfld.long 0x00 7. "INIT7,Channel 7 initialization value" "0,1"
bitfld.long 0x00 6. "INIT6,Channel 6 initialization value" "0,1"
bitfld.long 0x00 5. "INIT5,Channel 5 initialization value" "0,1"
bitfld.long 0x00 4. "INIT4,Channel 4 initialization value" "0,1"
bitfld.long 0x00 3. "INIT3,Channel 3 initialization value" "0,1"
newline
bitfld.long 0x00 2. "INIT2,Channel 2 initialization value" "0,1"
bitfld.long 0x00 1. "INIT1,Channel 1 initialization value" "0,1"
bitfld.long 0x00 0. "INIT0,Channel 0 initialization value" "0,1"
group.long 0x5C++0x03
line.long 0x00 "TIM3_TIM_OUTSWCR,TIM channel output software control register(TIM_OUTSWCR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "CH7OCV,Channel 7 output software control value" "0,1"
bitfld.long 0x00 14. "CH6OCV,Channel 6 output software control value" "0,1"
bitfld.long 0x00 13. "CH5OCV,Channel 5 output software control value" "0,1"
bitfld.long 0x00 12. "CH4OCV,Channel 4 output software control value" "0,1"
bitfld.long 0x00 11. "CH3OCV,Channel 3 output software control value" "0,1"
bitfld.long 0x00 10. "CH2OCV,Channel 2 output software control value" "0,1"
bitfld.long 0x00 9. "CH1OCV,Channel 1 output software control value" "0,1"
newline
bitfld.long 0x00 8. "CH0OCV,Channel 0 output software control value" "0,1"
bitfld.long 0x00 7. "CH7OC,Channel 7 output software control enable" "0,1"
bitfld.long 0x00 6. "CH6OC,Channel 6 output software control enable" "0,1"
bitfld.long 0x00 5. "CH5OC,Channel 5 output software control enable" "0,1"
bitfld.long 0x00 4. "CH4OC,Channel 4 output software control enable" "0,1"
bitfld.long 0x00 3. "CH3OC,Channel 3 output software control enable" "0,1"
bitfld.long 0x00 2. "CH2OC,Channel 2 output software control enable" "0,1"
bitfld.long 0x00 1. "CH1OC,Channel 1 output software control enable" "0,1"
newline
bitfld.long 0x00 0. "CH0OC,Channel 0 output software control enable" "0,1"
group.long 0x60++0x03
line.long 0x00 "TIM3_TIM_PCR,TIM pairs of channel control register(TIM_PCR)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 29. "DECAP3,Dual edge capture mode for pairs of channel 3" "0,1"
bitfld.long 0x00 28. "DECAPEN3,Dual edge capture enable for pairs of channel 3" "0,1"
bitfld.long 0x00 27. "SYNCEN3,Synchronization enable for pairs of channel 3" "0,1"
bitfld.long 0x00 26. "COMB3,Combine enable for pairs of channel 3" "0,1"
bitfld.long 0x00 25. "DTEN3,Deadtime insertion enable for pairs of channel 3" "0,1"
bitfld.long 0x00 24. "FCTLEN3,Fault control enabled for pairs of channel 3" "0,1"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 21. "DECAP2,Dual edge capture mode for pairs of channel 2" "0,1"
bitfld.long 0x00 20. "DECAPEN2,Dual edge capture enable for pairs of channel 2" "0,1"
bitfld.long 0x00 19. "SYNCEN2,Synchronization enable for pairs of channel 2" "0,1"
bitfld.long 0x00 18. "COMB2,Combine enable for pairs of channel 2" "0,1"
bitfld.long 0x00 17. "DTEN2,Deadtime insertion enable for pairs of channel 2" "0,1"
bitfld.long 0x00 16. "FCTLEN2,Fault control enabled for pairs of channel 2" "0,1"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
bitfld.long 0x00 13. "DECAP1,Dual edge capture mode for pairs of channel 1" "0,1"
newline
bitfld.long 0x00 12. "DECAPEN1,Dual edge capture enable for pairs of channel 1" "0,1"
bitfld.long 0x00 11. "SYNCEN1,Synchronization enable for pairs of channel 1" "0,1"
bitfld.long 0x00 10. "COMB1,Combine enable for pairs of channel 1" "0,1"
bitfld.long 0x00 9. "DTEN1,Deadtime insertion enable for pairs of channel 1" "0,1"
bitfld.long 0x00 8. "FCTLEN1,Fault control enabled for pairs of channel 1" "0,1"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 5. "DECAP0,Dual edge capture mode for pairs of channel 0" "0,1"
bitfld.long 0x00 4. "DECAPEN0,Dual edge capture enable for pairs of channel 0" "0,1"
newline
bitfld.long 0x00 3. "SYNCEN0,Synchronization enable for pairs of channel 0" "0,1"
bitfld.long 0x00 2. "COMB0,Combine enable for pairs of channel 0" "0,1"
bitfld.long 0x00 1. "DTEN0,Deadtime insertion enable for pairs of channel 0" "0,1"
bitfld.long 0x00 0. "FCTLEN0,Fault control enabled for pairs of channel 0" "0,1"
group.long 0x64++0x03
line.long 0x00 "TIM3_TIM_FILTER,TIM input filter register(TIM_FILTER)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 18.--23. "DTVAL,Deadtime insertion value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--17. "DTPS,Deadtime prescaler value" "0,1,2,3"
bitfld.long 0x00 12.--15. "FILVAL3,Channel 3 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "FILVAL2,Channel 2 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "FILVAL1,Channel 1 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "FILVAL0,Channel 0 input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x68++0x03
line.long 0x00 "TIM3_TIM_FLTCR,TIM fault control register(TIM_FLTCR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "FSTATE,Fault output status" "0,1"
bitfld.long 0x00 11.--14. "FIFVAL,Fault input filter value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 9.--10. "RSVD_10_9,Reserved" "0,1,2,3"
bitfld.long 0x00 8. "FLTCM,Falut clear mode" "0,1"
bitfld.long 0x00 7. "FLTCEN,Falut control enable" "0,1"
bitfld.long 0x00 6. "FLTIE,Fault interrupt enable" "0,1"
bitfld.long 0x00 5. "FLTPOL1,Fault input channel 1 polarity" "0,1"
newline
bitfld.long 0x00 4. "FIFEN1,Fault input filter enable 1" "0,1"
bitfld.long 0x00 3. "FAULTEN1,Fault input enable 1" "0,1"
bitfld.long 0x00 2. "FLTPOL0,Fault input channel 0 polarity" "0,1"
bitfld.long 0x00 1. "FIFEN0,Fault input filter enable 0" "0,1"
bitfld.long 0x00 0. "FAULTEN0,Fault input enable 0" "0,1"
group.long 0x6C++0x03
line.long 0x00 "TIM3_TIM_FLTSR,TIM fault status register(TIM_FLTSR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "WPEN,Write protection enable" "0,1"
bitfld.long 0x00 5. "FAULTIN,Fault inputs value" "0,1"
bitfld.long 0x00 4. "FAULTF,Fault detection flag" "0,1"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 1. "FAULTF1,Fault detection flag of fault channel 1" "0,1"
bitfld.long 0x00 0. "FAULTF0,Fault detection flag of fault channel 0" "0,1"
group.long 0x70++0x03
line.long 0x00 "TIM3_TIM_SYNC,TIM synchronization register(TIM_SYNC)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "SWRSTCNT,Software trigger activate CNT register synchronization" "0,1"
bitfld.long 0x00 18. "SWWRBUF,Software trigger activate write buffer synchronization" "0,1"
hexmask.long.byte 0x00 10.--17. 1. "RSVD_17_10,Reserved"
bitfld.long 0x00 9. "SYNCOSWC,OUTSWCR register synchronization" "0,1"
bitfld.long 0x00 8. "SYNCINIT,CNTINIT register synchronization" "0,1"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "SWTRIG,PWM synchronization software trigger" "0,1"
group.long 0x74++0x03
line.long 0x00 "TIM3_TIM_RELOAD,TIM reload register(TIM_RELOAD)"
hexmask.long.word 0x00 21.--31. 1. "RSVD_31_21,Reserved"
bitfld.long 0x00 16.--20. "LDFREQ,Reload frequency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--15. "RSVD_15_12,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "HCSEL,Half cycle reload select" "0,1"
bitfld.long 0x00 9.--10. "RSVD_10_9,Reserved" "0,1,2,3"
bitfld.long 0x00 8. "LOADEN,Reload enable" "0,1"
bitfld.long 0x00 7. "CH7SEL,Channel 7 select" "0,1"
bitfld.long 0x00 6. "CH6SEL,Channel 6 select" "0,1"
newline
bitfld.long 0x00 5. "CH5SEL,Channel 5 select" "0,1"
bitfld.long 0x00 4. "CH4SEL,Channel 4 select" "0,1"
bitfld.long 0x00 3. "CH3SEL,Channel 3 select" "0,1"
bitfld.long 0x00 2. "CH2SEL,Channel 2 select" "0,1"
bitfld.long 0x00 1. "CH1SEL,Channel 1 select" "0,1"
bitfld.long 0x00 0. "CH0SEL,Channel 0 select" "0,1"
group.long 0x78++0x03
line.long 0x00 "TIM3_TIM_HCV,TIM half cycle reload value register(TIM_HCV)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
hexmask.long.word 0x00 0.--15. 1. "HCV,Half cycle reload value"
tree.end
tree.end
tree "TMU (Thermal Monitoring Unit)"
base ad:0x40063000
group.long 0x00++0x03
line.long 0x00 "TMU_CFGn,Trig Mux Unit Configuration(TMU_CFG)"
bitfld.long 0x00 31. "LOCK,Write register lock" "0,1"
hexmask.long.word 0x00 17.--30. 1. "RSVD_30_17,Reserved"
bitfld.long 0x00 16. "EN,Mux Output Enable" "0,1"
hexmask.long.word 0x00 0.--15. 1. "SEL,Mux Input Select"
tree.end
tree "TRNG"
base ad:0x40034000
group.long 0x00++0x03
line.long 0x00 "TRNG_VERSION,TRNG Version register"
hexmask.long 0x00 0.--31. 1. "VERSION,Version number of the IP"
group.long 0x04++0x03
line.long 0x00 "CTR_DRBG_VERSION,CTR-DRBG Version register"
hexmask.long 0x00 0.--31. 1. "VERSION,Version number of the IP"
group.long 0x08++0x03
line.long 0x00 "TRNG_STATUS,TRNG Status register"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "CA,CTR-DRBG Alarms Valid bit" "0,1"
bitfld.long 0x00 2. "TA,TRNG Alarms Valid bit" "0,1"
bitfld.long 0x00 1. "IN,CTR-DRBG instantiated bit" "0,1"
bitfld.long 0x00 0. "RD,CTR-DRBG ready" "0,1"
group.long 0x0C++0x03
line.long 0x00 "TRNG_CONFIG,TRNG Config register"
hexmask.long.word 0x00 19.--31. 1. "RSVD_31_19,Reserved"
bitfld.long 0x00 14.--18. "LP,Latency Parameter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 4.--13. 1. "DEC,Decimation parameter"
bitfld.long 0x00 2.--3. "RSVD_3_2,Reserved" "0,1,2,3"
bitfld.long 0x00 1. "SM,Stream mode enable bit" "0,1"
bitfld.long 0x00 0. "EN,CTR-DRBG enable bit" "0,1"
group.long 0x10++0x03
line.long 0x00 "CTR_DRBG_CONTROL,CTR-DRBG Control register"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 5. "AK,CTR-DRBG Alram acknowledgement bit" "0,1"
bitfld.long 0x00 4. "RS,CTR-DRBG release bit" "0,1"
bitfld.long 0x00 3. "UN,CTR-DRBG uninstantiate bit" "0,1"
bitfld.long 0x00 2. "HT,CTR-DRBG health test bit" "0,1"
bitfld.long 0x00 1. "IN,CTR-DTRB instantiate bit" "0,1"
bitfld.long 0x00 0. "GE,CTR-DRBG generate bit" "0,1"
group.long 0x14++0x03
line.long 0x00 "CTR_DRBG_REQUEST_SIZE,CTR-DRBG Request Size register"
hexmask.long.tbyte 0x00 12.--31. 1. "RSVD_31_12,Reserved"
hexmask.long.word 0x00 0.--11. 1. "RS,Number of 128-bit words that are requested"
group.long 0x18++0x03
line.long 0x00 "CTR_DRBG_CONFIG_1,CTR-DRBG Config register 1"
hexmask.long 0x00 0.--31. 1. "RP,Number of generate requests between two reseeds"
group.long 0x1C++0x03
line.long 0x00 "CTR_DRBG_CONFIG_2,CTR-DRBG Config register 2"
hexmask.long 0x00 0.--31. 1. "HTP,Number of random generations between two periodic health tests"
group.long 0x20++0x03
line.long 0x00 "TRNG_ALARM,TRNG Alarm register"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "VA,TRNG Alarm valid bit" "0,1"
bitfld.long 0x00 3. "AL3,TRNG Alarm bit 3(Long run test)" "0,1"
bitfld.long 0x00 2. "AL2,TRNG Alarm bit 2(run test)" "0,1"
bitfld.long 0x00 1. "AL1,TRNG Alarm bit 1(poker test)" "0,1"
bitfld.long 0x00 0. "AL0,TRNG Alarm bit 0(Monobit test)" "0,1"
group.long 0x24++0x03
line.long 0x00 "CTR_DRBG_ALARM,CTR-DRBG Alarm register"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "VA,CTR-DRBG Alarm valid bit" "0,1"
bitfld.long 0x00 2. "AL2,CTR-DRBG Alarm bit 2" "0,1"
bitfld.long 0x00 1. "AL1,CTR-DRBG Alarm bit 1" "0,1"
bitfld.long 0x00 0. "AL0,CTR-DRBG Alarm bit 0" "0,1"
group.long 0x28++0x03
line.long 0x00 "TRNG_RAW_RANDOM_CONTROL,TRNG Raw Random Control register"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "FL,Raw data fifo flush bit" "0,1"
group.long 0x2C++0x03
line.long 0x00 "TRNG_RAW_RANDOM_DATA,TRNG Raw Random Data register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "VA,TRNG raw random data valid bit" "0,1"
hexmask.long.word 0x00 0.--15. 1. "DATA,Raw random data"
group.long 0x30++0x03
line.long 0x00 "CTR_DRBG_RANDOM_DATA,CTR-DRBG Random Data register"
hexmask.long.word 0x00 17.--31. 1. "RSVD_31_17,Reserved"
bitfld.long 0x00 16. "VA,CTR-DRBG random data valid bit" "0,1"
hexmask.long.word 0x00 0.--15. 1. "DATA,CTR-TRBG random data"
group.long 0x34++0x03
line.long 0x00 "ADDITIONAL_CONFIG_0,Additional Config register 0"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "SE,Noise module enable bit(Manual control)" "0,1"
bitfld.long 0x00 9. "E3,Long run test(TRNG embedded tests) enable bit" "0,1"
bitfld.long 0x00 8. "E2,Run test(TRNG embedded tests) enable bit" "0,1"
bitfld.long 0x00 7. "E1,Poker run test(TRNG embedded tests) enable bit" "0,1"
bitfld.long 0x00 6. "E0,Monobit test(TRNG embedded tests) enable bit" "0,1"
bitfld.long 0x00 5. "RE,Raw data recording enable bit" "0,1"
bitfld.long 0x00 4. "MC,Manual control enable bit" "0,1"
newline
bitfld.long 0x00 3. "I3,Long run test(TRNG embedded tests) ignore bit" "0,1"
bitfld.long 0x00 2. "I2,Run test(TRNG embedded tests) ignore bit" "0,1"
bitfld.long 0x00 1. "I1,Poker run test(TRNG embedded tests) ignore bit" "0,1"
bitfld.long 0x00 0. "I0,Monobit test(TRNG embedded tests) ignore bit" "0,1"
group.long 0x38++0x03
line.long 0x00 "ADDITIONAL_CONFIG_1,Additional Config register 1"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
hexmask.long.word 0x00 0.--10. 1. "AC1,Additional configuration word 1"
group.long 0x3C++0x03
line.long 0x00 "ADDITIONAL_CONFIG_2,Additional Config register 2"
hexmask.long 0x00 0.--31. 1. "AC2,Additional configuration word 2"
group.long 0x40++0x03
line.long 0x00 "ADDITIONAL_MEAS_CONTROL,Additional Measurement Control register"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "NS,Noise measurement start signal" "0,1"
group.long 0x44++0x03
line.long 0x00 "ADDITIONAL_MEAS_CONFIG,Additional Measurement Config register"
bitfld.long 0x00 30.--31. "SEL,Noise measurement selection" "0,1,2,3"
hexmask.long 0x00 0.--29. 1. "TIME,Noise measuremnt time"
group.long 0x48++0x03
line.long 0x00 "ADDITIONAL_MEAS_STATUS,Additional Measurement Status register"
hexmask.long 0x00 2.--31. 1. "RSVD_31_2,Reserved"
bitfld.long 0x00 1. "OV,Over" "0,1"
bitfld.long 0x00 0. "RD,Ready" "0,1"
group.long 0x4C++0x03
line.long 0x00 "ADDITIONAL_MEAS_DATA_0,Additional Measurement Data register 0"
hexmask.long 0x00 0.--31. 1. "D0,noise measurement data 0"
group.long 0x50++0x03
line.long 0x00 "ADDITIONAL_MEAS_DATA_1,Additional Measurement Data register 1"
hexmask.long 0x00 0.--31. 1. "D1,noise measurement data 1"
group.long 0x54++0x03
line.long 0x00 "IRQ_STATUS,Interrupt Request Status register"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "IS3,IRQ status bit 3" "0,1"
bitfld.long 0x00 2. "IS2,IRQ status bit 2" "0,1"
bitfld.long 0x00 1. "IS1,IRQ status bit 1" "0,1"
bitfld.long 0x00 0. "IS0,IRQ status bit 0" "0,1"
group.long 0x58++0x03
line.long 0x00 "IRQ_CLEAR,Interrupt Request Clear register"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "CL3,IRQ clear bit 3" "0,1"
bitfld.long 0x00 2. "CL2,IRQ clear bit 2" "0,1"
bitfld.long 0x00 1. "CL1,IRQ clear bit 1" "0,1"
bitfld.long 0x00 0. "CL0,IRQ clear bit 0" "0,1"
group.long 0x5C++0x03
line.long 0x00 "IRQ_CONFIG,Interrupt Request Config register"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "E3,IRQ Enable 3" "0,1"
bitfld.long 0x00 2. "E2,IRQ Enable 2" "0,1"
bitfld.long 0x00 1. "E1,IRQ Enable 1" "0,1"
bitfld.long 0x00 0. "E0,IRQ Enable 0" "0,1"
group.long 0x60++0x03
line.long 0x00 "ERROR_CONFIG,Error Config register"
hexmask.long 0x00 0.--31. 1. "TIMEOUT,Timeout value"
group.long 0x64++0x03
line.long 0x00 "ERROR_CONTROL,Error Control register"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "ST,Timeout start bit" "0,1"
group.long 0x68++0x03
line.long 0x00 "ERROR_STATUS,Error Status register"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,Reserved"
bitfld.long 0x00 2. "TR,Timeout error" "0,1"
bitfld.long 0x00 1. "OV,Timeout module over" "0,1"
bitfld.long 0x00 0. "RD,Timeout module ready" "0,1"
group.long 0x6C++0x03
line.long 0x00 "STATS_CONFIG,TRNG Monitoring Feature Config register"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "MO,Monitoring feature enable" "0,1"
group.long 0x70++0x03
line.long 0x00 "STATS_CONTROL,TRNG Monitoring Feature Control register"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "CL,Monitoring feature counter clear" "0,1"
group.long 0x74++0x03
line.long 0x00 "STATS_DATA,TRNG Monitoring Feature status register"
hexmask.long.word 0x00 16.--31. 1. "PA,Reserved"
hexmask.long.word 0x00 0.--15. 1. "EV,Reserved"
tree.end
tree "UART (Universal Asynchronous Receiver/Transmitter)"
tree "UART0"
base ad:0x4006A000
rgroup.long 0x00++0x03
line.long 0x00 "UART0_UART_RBR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "RBR_MSB,9th bit of rbr" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RBR_LSB,low 8bits of rbr"
rgroup.long 0x00++0x03
line.long 0x00 "UART0_UART_THR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "THR_MSB,the 9bit of Data to be transmitted" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "THR_LSB,low 8bits of thr"
rgroup.long 0x00++0x03
line.long 0x00 "UART0_UART_DLL,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_L,low 8bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART0_UART_DLH,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_H,high 8 bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART0_UART_IER,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "ASYNC_INT_EN,Async interrupt enable" "0,1"
bitfld.long 0x00 9. "RSP_DONE_INT_EN,response operation done interrupt enable" "0,1"
bitfld.long 0x00 8. "HEADER_DONE_INT_EN,header operation done interrupt enable" "0,1"
bitfld.long 0x00 7. "PTIME,Programmable THRE Interrupt Mode Enable" "0,1"
newline
bitfld.long 0x00 4.--6. "RSVD_6_4,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "EDSSI,Enable Modem Status Interrupt" "0,1"
bitfld.long 0x00 2. "ELSI,Enable Receiver Line Status Interrupt" "0,1"
bitfld.long 0x00 1. "ETBEI,Enable Transmit Holding Register Empty Interrupt" "0,1"
bitfld.long 0x00 0. "ERBFI,Enable Received Data Available Interrupt" "0,1"
rgroup.long 0x08++0x03
line.long 0x00 "UART0_UART_IIR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "FIFOSE,FIFOs Enabled" "0,1,2,3"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "IID,Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x08++0x03
line.long 0x00 "UART0_UART_FCR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "RCVR,receiver interrupt trigger" "0,1,2,3"
bitfld.long 0x00 4.--5. "TET,transmit empty threshold" "0,1,2,3"
bitfld.long 0x00 3. "DMAM,DMA Mode" "0,1"
bitfld.long 0x00 2. "XFIFOR,XMIT FIFO Reset" "0,1"
newline
bitfld.long 0x00 1. "RFIFOR,RCVR FIFO Reset" "0,1"
bitfld.long 0x00 0. "FIFOE,FIFO Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "UART0_UART_LCR,LIN Control Register(LIN_LCR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "DEBUG_EN,debug enable" "0,1"
bitfld.long 0x00 18. "AUTO_SYNC_EN,LIN baudrate auto sync enable" "0,1"
bitfld.long 0x00 17. "IDLE_DET_EN,idle detect enable" "0,1"
bitfld.long 0x00 14.--16. "IDLE_DET_LENGTH,idle detect lendth" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--13. "LBKM,the length of break in LIN mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "DLAB,Divisor Latch Access Bit" "0,1"
bitfld.long 0x00 6. "BC,Break Control Bit" "0,1"
bitfld.long 0x00 5. "STP,Stick Parity" "0,1"
newline
bitfld.long 0x00 4. "EPS,Even Parity Select" "0,1"
bitfld.long 0x00 3. "PEN,Parity Enable" "0,1"
bitfld.long 0x00 2. "STOP,Number of stop bits" "0,1"
bitfld.long 0x00 0.--1. "DLS,Data Length Select" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "UART0_UART_AFCR,Autoflow Control Register(LIN_AFCR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "SIRE,SIR Mode Enable" "0,1"
bitfld.long 0x00 5. "AFCE,Auto Flow Control Enable" "0,1"
bitfld.long 0x00 4. "LB,LoopBack Bit" "0,1"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
newline
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "RTS,Request to Send" "0,1"
bitfld.long 0x00 0. "RSVD_0,Reserved" "0,1"
rgroup.long 0x14++0x03
line.long 0x00 "UART0_UART_LSR,Line Status Register(LIN_LSR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "RSP_OP_DONE,response operation done flag" "0,1"
bitfld.long 0x00 14. "HEADER_OP_DONE,header operation done flag" "0,1"
bitfld.long 0x00 13. "TO_ERROR,timeout error" "0,1"
bitfld.long 0x00 12. "CHECKSUM_ERROR,checksum error flag" "0,1"
newline
bitfld.long 0x00 11. "PID_ERR,PID error" "0,1"
bitfld.long 0x00 10. "SYNC_FIELD_ERROR,sync field error" "0,1"
bitfld.long 0x00 9. "ASYNC_INT,Async interrupt flag" "0,1"
bitfld.long 0x00 8. "ADDR_RCVD,Address Received bit" "0,1"
bitfld.long 0x00 7. "RFE,Receiver FIFO Error bit" "0,1"
newline
bitfld.long 0x00 6. "TEMT,Transmitter Empty bit" "0,1"
bitfld.long 0x00 5. "THRE,Transmit Holding Register Empty bit" "0,1"
bitfld.long 0x00 4. "BI,Break Interrupt bit" "0,1"
bitfld.long 0x00 3. "FE,Framing Error bit" "0,1"
bitfld.long 0x00 2. "PE,Parity Error bit" "0,1"
newline
bitfld.long 0x00 1. "OE,Overrun error bit" "0,1"
bitfld.long 0x00 0. "DR,Data Ready bit" "0,1"
rgroup.long 0x18++0x03
line.long 0x00 "UART0_UART_MSR,Modem Status Register(LIN_MSR)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "CTS,clear to send" "0,1"
bitfld.long 0x00 0.--3. "RSVD_3_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x7C++0x03
line.long 0x00 "UART0_UART_USR,UART Status Register(LIN_USR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "BUSY,UART Busy" "0,1"
wgroup.long 0xA8++0x03
line.long 0x00 "UART0_UART_DMA_SA,DMA Software Acknowledge(LIN_DMA_SA)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "DMA_SA,Reserved" "0,1"
group.long 0xC0++0x03
line.long 0x00 "UART0_UART_FD,fraction divisor register(LIN_FD)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "FD,Fractional divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xC4++0x03
line.long 0x00 "UART0_UART_RAR,Receive Address Register (LIN_RAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "RAR,address matching"
group.long 0xC8++0x03
line.long 0x00 "UART0_UART_TAR,Transmit Address Register(LIN_TAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "TAR,address matching register during transmit mode"
group.long 0xCC++0x03
line.long 0x00 "UART0_UART_LCR_EXT,Line Extended Control Register(LIN_LCR_EXT)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "TRANSMIST_MODE,Transmit mode control bit" "0,1"
bitfld.long 0x00 2. "SEND_ADDR,Send address control bit" "0,1"
bitfld.long 0x00 1. "ADDR_MATCH,Address Match Mode" "0,1"
bitfld.long 0x00 0. "DLS_E,Extension for DLS" "0,1"
group.long 0x100++0x03
line.long 0x00 "UART0_LIN_CTL,LIN mode control register(LIN_CTL)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RSP_DIR,response operation direction" "0,1"
bitfld.long 0x00 3. "RSP_OP_START,response operation start trigger" "0,1"
bitfld.long 0x00 2. "HEADER_OP_START,header operation start trigger" "0,1"
bitfld.long 0x00 1. "MASTER_MODE,master mode" "0,1"
newline
bitfld.long 0x00 0. "LIN_MODE,LIN mode enable" "0,1"
group.long 0x104++0x03
line.long 0x00 "UART0_UART_LIN_RSP_LENGTH,LIN response length register(LIN_RSP_LENGTH)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "RSP_LENGTH,LIN response length register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x108++0x03
line.long 0x00 "UART0_UART_LIN_PID_VALUE,LIN PID register(LIN_PID_VALUE)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 0.--5. "PID,LIN PID register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x10C++0x03
line.long 0x00 "UART0_UART_LIN_CHECKSUM,LIN checksum register(LIN_CHECKSUM)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "CHECKSUM_TYPE,LIN checksum type" "0,1"
group.long 0x110++0x03
line.long 0x00 "UART0_UART_LIN_DEL_LENGTH,LIN delimiter field length(LIN_DEL_LENGTH)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,Reserved"
bitfld.long 0x00 0.--2. "LIN_DEL_LENGTH,LIN delimiter field length" "0,1,2,3,4,5,6,7"
group.long 0x114++0x03
line.long 0x00 "UART0_UART_LIN_PID_FILTER_0,LIN PID filter 0(LIN_PID_FILTER_0)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID3,filter PID3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID2,filter PID2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID1,filter PID1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID0,filter PID0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x118++0x03
line.long 0x00 "UART0_UART_LIN_PID_FILTER_1,LIN PID filter 1(LIN_PID_FILTER_1)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID7,filter PID7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID6,filter PID6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID5,filter PID5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID4,filter PID4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x11C++0x03
line.long 0x00 "UART0_UART_LIN_PID_FILTER_2,LIN PID filter 2(LIN_PID_FILTER_2)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID11,filter PID11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID10,filter PID10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID9,filter PID9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID8,filter PID8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x120++0x03
line.long 0x00 "UART0_UART_LIN_PID_FILTER_3,LIN PID filter 3(LIN_PID_FILTER_3)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID15,filter PID15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID14,filter PID14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID13,filter PID13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID12,filter PID12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x124++0x03
line.long 0x00 "UART0_UART_LIN_PID_FILTER_VAGUE,LIN PID filter vague(LIN_PID_FILTER_VAGUE)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID_VAGUE,vague filter PID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x128++0x03
line.long 0x00 "UART0_UART_LIN_PID_FILTER_CTRL,LIN PID filter ctrl register(LIN_PID_FILTER_CTRL)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 23. "LIN_FILTER_EN,the enable bit of the filter" "0,1"
bitfld.long 0x00 17.--22. "FID_VAGUE_MASK,he enable bit of the filter vague id" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.tbyte 0x00 0.--16. 1. "FID_MASK,the enable bit of the filter id 0-15"
tree.end
tree "UART1"
base ad:0x4006B000
rgroup.long 0x00++0x03
line.long 0x00 "UART1_UART_RBR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "RBR_MSB,9th bit of rbr" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RBR_LSB,low 8bits of rbr"
rgroup.long 0x00++0x03
line.long 0x00 "UART1_UART_THR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "THR_MSB,the 9bit of Data to be transmitted" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "THR_LSB,low 8bits of thr"
rgroup.long 0x00++0x03
line.long 0x00 "UART1_UART_DLL,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_L,low 8bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART1_UART_DLH,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_H,high 8 bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART1_UART_IER,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "ASYNC_INT_EN,Async interrupt enable" "0,1"
bitfld.long 0x00 9. "RSP_DONE_INT_EN,response operation done interrupt enable" "0,1"
bitfld.long 0x00 8. "HEADER_DONE_INT_EN,header operation done interrupt enable" "0,1"
bitfld.long 0x00 7. "PTIME,Programmable THRE Interrupt Mode Enable" "0,1"
newline
bitfld.long 0x00 4.--6. "RSVD_6_4,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "EDSSI,Enable Modem Status Interrupt" "0,1"
bitfld.long 0x00 2. "ELSI,Enable Receiver Line Status Interrupt" "0,1"
bitfld.long 0x00 1. "ETBEI,Enable Transmit Holding Register Empty Interrupt" "0,1"
bitfld.long 0x00 0. "ERBFI,Enable Received Data Available Interrupt" "0,1"
rgroup.long 0x08++0x03
line.long 0x00 "UART1_UART_IIR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "FIFOSE,FIFOs Enabled" "0,1,2,3"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "IID,Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x08++0x03
line.long 0x00 "UART1_UART_FCR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "RCVR,receiver interrupt trigger" "0,1,2,3"
bitfld.long 0x00 4.--5. "TET,transmit empty threshold" "0,1,2,3"
bitfld.long 0x00 3. "DMAM,DMA Mode" "0,1"
bitfld.long 0x00 2. "XFIFOR,XMIT FIFO Reset" "0,1"
newline
bitfld.long 0x00 1. "RFIFOR,RCVR FIFO Reset" "0,1"
bitfld.long 0x00 0. "FIFOE,FIFO Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "UART1_UART_LCR,LIN Control Register(LIN_LCR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "DEBUG_EN,debug enable" "0,1"
bitfld.long 0x00 18. "AUTO_SYNC_EN,LIN baudrate auto sync enable" "0,1"
bitfld.long 0x00 17. "IDLE_DET_EN,idle detect enable" "0,1"
bitfld.long 0x00 14.--16. "IDLE_DET_LENGTH,idle detect lendth" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--13. "LBKM,the length of break in LIN mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "DLAB,Divisor Latch Access Bit" "0,1"
bitfld.long 0x00 6. "BC,Break Control Bit" "0,1"
bitfld.long 0x00 5. "STP,Stick Parity" "0,1"
newline
bitfld.long 0x00 4. "EPS,Even Parity Select" "0,1"
bitfld.long 0x00 3. "PEN,Parity Enable" "0,1"
bitfld.long 0x00 2. "STOP,Number of stop bits" "0,1"
bitfld.long 0x00 0.--1. "DLS,Data Length Select" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "UART1_UART_AFCR,Autoflow Control Register(LIN_AFCR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "SIRE,SIR Mode Enable" "0,1"
bitfld.long 0x00 5. "AFCE,Auto Flow Control Enable" "0,1"
bitfld.long 0x00 4. "LB,LoopBack Bit" "0,1"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
newline
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "RTS,Request to Send" "0,1"
bitfld.long 0x00 0. "RSVD_0,Reserved" "0,1"
rgroup.long 0x14++0x03
line.long 0x00 "UART1_UART_LSR,Line Status Register(LIN_LSR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "RSP_OP_DONE,response operation done flag" "0,1"
bitfld.long 0x00 14. "HEADER_OP_DONE,header operation done flag" "0,1"
bitfld.long 0x00 13. "TO_ERROR,timeout error" "0,1"
bitfld.long 0x00 12. "CHECKSUM_ERROR,checksum error flag" "0,1"
newline
bitfld.long 0x00 11. "PID_ERR,PID error" "0,1"
bitfld.long 0x00 10. "SYNC_FIELD_ERROR,sync field error" "0,1"
bitfld.long 0x00 9. "ASYNC_INT,Async interrupt flag" "0,1"
bitfld.long 0x00 8. "ADDR_RCVD,Address Received bit" "0,1"
bitfld.long 0x00 7. "RFE,Receiver FIFO Error bit" "0,1"
newline
bitfld.long 0x00 6. "TEMT,Transmitter Empty bit" "0,1"
bitfld.long 0x00 5. "THRE,Transmit Holding Register Empty bit" "0,1"
bitfld.long 0x00 4. "BI,Break Interrupt bit" "0,1"
bitfld.long 0x00 3. "FE,Framing Error bit" "0,1"
bitfld.long 0x00 2. "PE,Parity Error bit" "0,1"
newline
bitfld.long 0x00 1. "OE,Overrun error bit" "0,1"
bitfld.long 0x00 0. "DR,Data Ready bit" "0,1"
rgroup.long 0x18++0x03
line.long 0x00 "UART1_UART_MSR,Modem Status Register(LIN_MSR)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "CTS,clear to send" "0,1"
bitfld.long 0x00 0.--3. "RSVD_3_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x7C++0x03
line.long 0x00 "UART1_UART_USR,UART Status Register(LIN_USR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "BUSY,UART Busy" "0,1"
wgroup.long 0xA8++0x03
line.long 0x00 "UART1_UART_DMA_SA,DMA Software Acknowledge(LIN_DMA_SA)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "DMA_SA,Reserved" "0,1"
group.long 0xC0++0x03
line.long 0x00 "UART1_UART_FD,fraction divisor register(LIN_FD)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "FD,Fractional divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xC4++0x03
line.long 0x00 "UART1_UART_RAR,Receive Address Register (LIN_RAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "RAR,address matching"
group.long 0xC8++0x03
line.long 0x00 "UART1_UART_TAR,Transmit Address Register(LIN_TAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "TAR,address matching register during transmit mode"
group.long 0xCC++0x03
line.long 0x00 "UART1_UART_LCR_EXT,Line Extended Control Register(LIN_LCR_EXT)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "TRANSMIST_MODE,Transmit mode control bit" "0,1"
bitfld.long 0x00 2. "SEND_ADDR,Send address control bit" "0,1"
bitfld.long 0x00 1. "ADDR_MATCH,Address Match Mode" "0,1"
bitfld.long 0x00 0. "DLS_E,Extension for DLS" "0,1"
group.long 0x100++0x03
line.long 0x00 "UART1_LIN_CTL,LIN mode control register(LIN_CTL)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RSP_DIR,response operation direction" "0,1"
bitfld.long 0x00 3. "RSP_OP_START,response operation start trigger" "0,1"
bitfld.long 0x00 2. "HEADER_OP_START,header operation start trigger" "0,1"
bitfld.long 0x00 1. "MASTER_MODE,master mode" "0,1"
newline
bitfld.long 0x00 0. "LIN_MODE,LIN mode enable" "0,1"
group.long 0x104++0x03
line.long 0x00 "UART1_UART_LIN_RSP_LENGTH,LIN response length register(LIN_RSP_LENGTH)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "RSP_LENGTH,LIN response length register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x108++0x03
line.long 0x00 "UART1_UART_LIN_PID_VALUE,LIN PID register(LIN_PID_VALUE)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 0.--5. "PID,LIN PID register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x10C++0x03
line.long 0x00 "UART1_UART_LIN_CHECKSUM,LIN checksum register(LIN_CHECKSUM)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "CHECKSUM_TYPE,LIN checksum type" "0,1"
group.long 0x110++0x03
line.long 0x00 "UART1_UART_LIN_DEL_LENGTH,LIN delimiter field length(LIN_DEL_LENGTH)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,Reserved"
bitfld.long 0x00 0.--2. "LIN_DEL_LENGTH,LIN delimiter field length" "0,1,2,3,4,5,6,7"
group.long 0x114++0x03
line.long 0x00 "UART1_UART_LIN_PID_FILTER_0,LIN PID filter 0(LIN_PID_FILTER_0)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID3,filter PID3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID2,filter PID2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID1,filter PID1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID0,filter PID0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x118++0x03
line.long 0x00 "UART1_UART_LIN_PID_FILTER_1,LIN PID filter 1(LIN_PID_FILTER_1)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID7,filter PID7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID6,filter PID6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID5,filter PID5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID4,filter PID4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x11C++0x03
line.long 0x00 "UART1_UART_LIN_PID_FILTER_2,LIN PID filter 2(LIN_PID_FILTER_2)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID11,filter PID11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID10,filter PID10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID9,filter PID9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID8,filter PID8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x120++0x03
line.long 0x00 "UART1_UART_LIN_PID_FILTER_3,LIN PID filter 3(LIN_PID_FILTER_3)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID15,filter PID15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID14,filter PID14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID13,filter PID13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID12,filter PID12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x124++0x03
line.long 0x00 "UART1_UART_LIN_PID_FILTER_VAGUE,LIN PID filter vague(LIN_PID_FILTER_VAGUE)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID_VAGUE,vague filter PID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x128++0x03
line.long 0x00 "UART1_UART_LIN_PID_FILTER_CTRL,LIN PID filter ctrl register(LIN_PID_FILTER_CTRL)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 23. "LIN_FILTER_EN,the enable bit of the filter" "0,1"
bitfld.long 0x00 17.--22. "FID_VAGUE_MASK,he enable bit of the filter vague id" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.tbyte 0x00 0.--16. 1. "FID_MASK,the enable bit of the filter id 0-15"
tree.end
tree "UART2"
base ad:0x4006C000
rgroup.long 0x00++0x03
line.long 0x00 "UART2_UART_RBR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "RBR_MSB,9th bit of rbr" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RBR_LSB,low 8bits of rbr"
rgroup.long 0x00++0x03
line.long 0x00 "UART2_UART_THR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "THR_MSB,the 9bit of Data to be transmitted" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "THR_LSB,low 8bits of thr"
rgroup.long 0x00++0x03
line.long 0x00 "UART2_UART_DLL,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_L,low 8bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART2_UART_DLH,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_H,high 8 bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART2_UART_IER,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "ASYNC_INT_EN,Async interrupt enable" "0,1"
bitfld.long 0x00 9. "RSP_DONE_INT_EN,response operation done interrupt enable" "0,1"
bitfld.long 0x00 8. "HEADER_DONE_INT_EN,header operation done interrupt enable" "0,1"
bitfld.long 0x00 7. "PTIME,Programmable THRE Interrupt Mode Enable" "0,1"
newline
bitfld.long 0x00 4.--6. "RSVD_6_4,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "EDSSI,Enable Modem Status Interrupt" "0,1"
bitfld.long 0x00 2. "ELSI,Enable Receiver Line Status Interrupt" "0,1"
bitfld.long 0x00 1. "ETBEI,Enable Transmit Holding Register Empty Interrupt" "0,1"
bitfld.long 0x00 0. "ERBFI,Enable Received Data Available Interrupt" "0,1"
rgroup.long 0x08++0x03
line.long 0x00 "UART2_UART_IIR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "FIFOSE,FIFOs Enabled" "0,1,2,3"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "IID,Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x08++0x03
line.long 0x00 "UART2_UART_FCR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "RCVR,receiver interrupt trigger" "0,1,2,3"
bitfld.long 0x00 4.--5. "TET,transmit empty threshold" "0,1,2,3"
bitfld.long 0x00 3. "DMAM,DMA Mode" "0,1"
bitfld.long 0x00 2. "XFIFOR,XMIT FIFO Reset" "0,1"
newline
bitfld.long 0x00 1. "RFIFOR,RCVR FIFO Reset" "0,1"
bitfld.long 0x00 0. "FIFOE,FIFO Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "UART2_UART_LCR,LIN Control Register(LIN_LCR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "DEBUG_EN,debug enable" "0,1"
bitfld.long 0x00 18. "AUTO_SYNC_EN,LIN baudrate auto sync enable" "0,1"
bitfld.long 0x00 17. "IDLE_DET_EN,idle detect enable" "0,1"
bitfld.long 0x00 14.--16. "IDLE_DET_LENGTH,idle detect lendth" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--13. "LBKM,the length of break in LIN mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "DLAB,Divisor Latch Access Bit" "0,1"
bitfld.long 0x00 6. "BC,Break Control Bit" "0,1"
bitfld.long 0x00 5. "STP,Stick Parity" "0,1"
newline
bitfld.long 0x00 4. "EPS,Even Parity Select" "0,1"
bitfld.long 0x00 3. "PEN,Parity Enable" "0,1"
bitfld.long 0x00 2. "STOP,Number of stop bits" "0,1"
bitfld.long 0x00 0.--1. "DLS,Data Length Select" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "UART2_UART_AFCR,Autoflow Control Register(LIN_AFCR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "SIRE,SIR Mode Enable" "0,1"
bitfld.long 0x00 5. "AFCE,Auto Flow Control Enable" "0,1"
bitfld.long 0x00 4. "LB,LoopBack Bit" "0,1"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
newline
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "RTS,Request to Send" "0,1"
bitfld.long 0x00 0. "RSVD_0,Reserved" "0,1"
rgroup.long 0x14++0x03
line.long 0x00 "UART2_UART_LSR,Line Status Register(LIN_LSR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "RSP_OP_DONE,response operation done flag" "0,1"
bitfld.long 0x00 14. "HEADER_OP_DONE,header operation done flag" "0,1"
bitfld.long 0x00 13. "TO_ERROR,timeout error" "0,1"
bitfld.long 0x00 12. "CHECKSUM_ERROR,checksum error flag" "0,1"
newline
bitfld.long 0x00 11. "PID_ERR,PID error" "0,1"
bitfld.long 0x00 10. "SYNC_FIELD_ERROR,sync field error" "0,1"
bitfld.long 0x00 9. "ASYNC_INT,Async interrupt flag" "0,1"
bitfld.long 0x00 8. "ADDR_RCVD,Address Received bit" "0,1"
bitfld.long 0x00 7. "RFE,Receiver FIFO Error bit" "0,1"
newline
bitfld.long 0x00 6. "TEMT,Transmitter Empty bit" "0,1"
bitfld.long 0x00 5. "THRE,Transmit Holding Register Empty bit" "0,1"
bitfld.long 0x00 4. "BI,Break Interrupt bit" "0,1"
bitfld.long 0x00 3. "FE,Framing Error bit" "0,1"
bitfld.long 0x00 2. "PE,Parity Error bit" "0,1"
newline
bitfld.long 0x00 1. "OE,Overrun error bit" "0,1"
bitfld.long 0x00 0. "DR,Data Ready bit" "0,1"
rgroup.long 0x18++0x03
line.long 0x00 "UART2_UART_MSR,Modem Status Register(LIN_MSR)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "CTS,clear to send" "0,1"
bitfld.long 0x00 0.--3. "RSVD_3_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x7C++0x03
line.long 0x00 "UART2_UART_USR,UART Status Register(LIN_USR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "BUSY,UART Busy" "0,1"
wgroup.long 0xA8++0x03
line.long 0x00 "UART2_UART_DMA_SA,DMA Software Acknowledge(LIN_DMA_SA)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "DMA_SA,Reserved" "0,1"
group.long 0xC0++0x03
line.long 0x00 "UART2_UART_FD,fraction divisor register(LIN_FD)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "FD,Fractional divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xC4++0x03
line.long 0x00 "UART2_UART_RAR,Receive Address Register (LIN_RAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "RAR,address matching"
group.long 0xC8++0x03
line.long 0x00 "UART2_UART_TAR,Transmit Address Register(LIN_TAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "TAR,address matching register during transmit mode"
group.long 0xCC++0x03
line.long 0x00 "UART2_UART_LCR_EXT,Line Extended Control Register(LIN_LCR_EXT)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "TRANSMIST_MODE,Transmit mode control bit" "0,1"
bitfld.long 0x00 2. "SEND_ADDR,Send address control bit" "0,1"
bitfld.long 0x00 1. "ADDR_MATCH,Address Match Mode" "0,1"
bitfld.long 0x00 0. "DLS_E,Extension for DLS" "0,1"
group.long 0x100++0x03
line.long 0x00 "UART2_LIN_CTL,LIN mode control register(LIN_CTL)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RSP_DIR,response operation direction" "0,1"
bitfld.long 0x00 3. "RSP_OP_START,response operation start trigger" "0,1"
bitfld.long 0x00 2. "HEADER_OP_START,header operation start trigger" "0,1"
bitfld.long 0x00 1. "MASTER_MODE,master mode" "0,1"
newline
bitfld.long 0x00 0. "LIN_MODE,LIN mode enable" "0,1"
group.long 0x104++0x03
line.long 0x00 "UART2_UART_LIN_RSP_LENGTH,LIN response length register(LIN_RSP_LENGTH)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "RSP_LENGTH,LIN response length register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x108++0x03
line.long 0x00 "UART2_UART_LIN_PID_VALUE,LIN PID register(LIN_PID_VALUE)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 0.--5. "PID,LIN PID register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x10C++0x03
line.long 0x00 "UART2_UART_LIN_CHECKSUM,LIN checksum register(LIN_CHECKSUM)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "CHECKSUM_TYPE,LIN checksum type" "0,1"
group.long 0x110++0x03
line.long 0x00 "UART2_UART_LIN_DEL_LENGTH,LIN delimiter field length(LIN_DEL_LENGTH)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,Reserved"
bitfld.long 0x00 0.--2. "LIN_DEL_LENGTH,LIN delimiter field length" "0,1,2,3,4,5,6,7"
group.long 0x114++0x03
line.long 0x00 "UART2_UART_LIN_PID_FILTER_0,LIN PID filter 0(LIN_PID_FILTER_0)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID3,filter PID3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID2,filter PID2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID1,filter PID1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID0,filter PID0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x118++0x03
line.long 0x00 "UART2_UART_LIN_PID_FILTER_1,LIN PID filter 1(LIN_PID_FILTER_1)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID7,filter PID7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID6,filter PID6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID5,filter PID5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID4,filter PID4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x11C++0x03
line.long 0x00 "UART2_UART_LIN_PID_FILTER_2,LIN PID filter 2(LIN_PID_FILTER_2)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID11,filter PID11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID10,filter PID10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID9,filter PID9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID8,filter PID8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x120++0x03
line.long 0x00 "UART2_UART_LIN_PID_FILTER_3,LIN PID filter 3(LIN_PID_FILTER_3)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID15,filter PID15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID14,filter PID14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID13,filter PID13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID12,filter PID12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x124++0x03
line.long 0x00 "UART2_UART_LIN_PID_FILTER_VAGUE,LIN PID filter vague(LIN_PID_FILTER_VAGUE)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID_VAGUE,vague filter PID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x128++0x03
line.long 0x00 "UART2_UART_LIN_PID_FILTER_CTRL,LIN PID filter ctrl register(LIN_PID_FILTER_CTRL)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 23. "LIN_FILTER_EN,the enable bit of the filter" "0,1"
bitfld.long 0x00 17.--22. "FID_VAGUE_MASK,he enable bit of the filter vague id" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.tbyte 0x00 0.--16. 1. "FID_MASK,the enable bit of the filter id 0-15"
tree.end
tree "UART3"
base ad:0x40070000
rgroup.long 0x00++0x03
line.long 0x00 "UART3_UART_RBR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "RBR_MSB,9th bit of rbr" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RBR_LSB,low 8bits of rbr"
rgroup.long 0x00++0x03
line.long 0x00 "UART3_UART_THR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "THR_MSB,the 9bit of Data to be transmitted" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "THR_LSB,low 8bits of thr"
rgroup.long 0x00++0x03
line.long 0x00 "UART3_UART_DLL,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_L,low 8bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART3_UART_DLH,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_H,high 8 bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART3_UART_IER,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "ASYNC_INT_EN,Async interrupt enable" "0,1"
bitfld.long 0x00 9. "RSP_DONE_INT_EN,response operation done interrupt enable" "0,1"
bitfld.long 0x00 8. "HEADER_DONE_INT_EN,header operation done interrupt enable" "0,1"
bitfld.long 0x00 7. "PTIME,Programmable THRE Interrupt Mode Enable" "0,1"
newline
bitfld.long 0x00 4.--6. "RSVD_6_4,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "EDSSI,Enable Modem Status Interrupt" "0,1"
bitfld.long 0x00 2. "ELSI,Enable Receiver Line Status Interrupt" "0,1"
bitfld.long 0x00 1. "ETBEI,Enable Transmit Holding Register Empty Interrupt" "0,1"
bitfld.long 0x00 0. "ERBFI,Enable Received Data Available Interrupt" "0,1"
rgroup.long 0x08++0x03
line.long 0x00 "UART3_UART_IIR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "FIFOSE,FIFOs Enabled" "0,1,2,3"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "IID,Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x08++0x03
line.long 0x00 "UART3_UART_FCR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "RCVR,receiver interrupt trigger" "0,1,2,3"
bitfld.long 0x00 4.--5. "TET,transmit empty threshold" "0,1,2,3"
bitfld.long 0x00 3. "DMAM,DMA Mode" "0,1"
bitfld.long 0x00 2. "XFIFOR,XMIT FIFO Reset" "0,1"
newline
bitfld.long 0x00 1. "RFIFOR,RCVR FIFO Reset" "0,1"
bitfld.long 0x00 0. "FIFOE,FIFO Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "UART3_UART_LCR,LIN Control Register(LIN_LCR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "DEBUG_EN,debug enable" "0,1"
bitfld.long 0x00 18. "AUTO_SYNC_EN,LIN baudrate auto sync enable" "0,1"
bitfld.long 0x00 17. "IDLE_DET_EN,idle detect enable" "0,1"
bitfld.long 0x00 14.--16. "IDLE_DET_LENGTH,idle detect lendth" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--13. "LBKM,the length of break in LIN mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "DLAB,Divisor Latch Access Bit" "0,1"
bitfld.long 0x00 6. "BC,Break Control Bit" "0,1"
bitfld.long 0x00 5. "STP,Stick Parity" "0,1"
newline
bitfld.long 0x00 4. "EPS,Even Parity Select" "0,1"
bitfld.long 0x00 3. "PEN,Parity Enable" "0,1"
bitfld.long 0x00 2. "STOP,Number of stop bits" "0,1"
bitfld.long 0x00 0.--1. "DLS,Data Length Select" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "UART3_UART_AFCR,Autoflow Control Register(LIN_AFCR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "SIRE,SIR Mode Enable" "0,1"
bitfld.long 0x00 5. "AFCE,Auto Flow Control Enable" "0,1"
bitfld.long 0x00 4. "LB,LoopBack Bit" "0,1"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
newline
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "RTS,Request to Send" "0,1"
bitfld.long 0x00 0. "RSVD_0,Reserved" "0,1"
rgroup.long 0x14++0x03
line.long 0x00 "UART3_UART_LSR,Line Status Register(LIN_LSR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "RSP_OP_DONE,response operation done flag" "0,1"
bitfld.long 0x00 14. "HEADER_OP_DONE,header operation done flag" "0,1"
bitfld.long 0x00 13. "TO_ERROR,timeout error" "0,1"
bitfld.long 0x00 12. "CHECKSUM_ERROR,checksum error flag" "0,1"
newline
bitfld.long 0x00 11. "PID_ERR,PID error" "0,1"
bitfld.long 0x00 10. "SYNC_FIELD_ERROR,sync field error" "0,1"
bitfld.long 0x00 9. "ASYNC_INT,Async interrupt flag" "0,1"
bitfld.long 0x00 8. "ADDR_RCVD,Address Received bit" "0,1"
bitfld.long 0x00 7. "RFE,Receiver FIFO Error bit" "0,1"
newline
bitfld.long 0x00 6. "TEMT,Transmitter Empty bit" "0,1"
bitfld.long 0x00 5. "THRE,Transmit Holding Register Empty bit" "0,1"
bitfld.long 0x00 4. "BI,Break Interrupt bit" "0,1"
bitfld.long 0x00 3. "FE,Framing Error bit" "0,1"
bitfld.long 0x00 2. "PE,Parity Error bit" "0,1"
newline
bitfld.long 0x00 1. "OE,Overrun error bit" "0,1"
bitfld.long 0x00 0. "DR,Data Ready bit" "0,1"
rgroup.long 0x18++0x03
line.long 0x00 "UART3_UART_MSR,Modem Status Register(LIN_MSR)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "CTS,clear to send" "0,1"
bitfld.long 0x00 0.--3. "RSVD_3_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x7C++0x03
line.long 0x00 "UART3_UART_USR,UART Status Register(LIN_USR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "BUSY,UART Busy" "0,1"
wgroup.long 0xA8++0x03
line.long 0x00 "UART3_UART_DMA_SA,DMA Software Acknowledge(LIN_DMA_SA)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "DMA_SA,Reserved" "0,1"
group.long 0xC0++0x03
line.long 0x00 "UART3_UART_FD,fraction divisor register(LIN_FD)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "FD,Fractional divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xC4++0x03
line.long 0x00 "UART3_UART_RAR,Receive Address Register (LIN_RAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "RAR,address matching"
group.long 0xC8++0x03
line.long 0x00 "UART3_UART_TAR,Transmit Address Register(LIN_TAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "TAR,address matching register during transmit mode"
group.long 0xCC++0x03
line.long 0x00 "UART3_UART_LCR_EXT,Line Extended Control Register(LIN_LCR_EXT)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "TRANSMIST_MODE,Transmit mode control bit" "0,1"
bitfld.long 0x00 2. "SEND_ADDR,Send address control bit" "0,1"
bitfld.long 0x00 1. "ADDR_MATCH,Address Match Mode" "0,1"
bitfld.long 0x00 0. "DLS_E,Extension for DLS" "0,1"
group.long 0x100++0x03
line.long 0x00 "UART3_LIN_CTL,LIN mode control register(LIN_CTL)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RSP_DIR,response operation direction" "0,1"
bitfld.long 0x00 3. "RSP_OP_START,response operation start trigger" "0,1"
bitfld.long 0x00 2. "HEADER_OP_START,header operation start trigger" "0,1"
bitfld.long 0x00 1. "MASTER_MODE,master mode" "0,1"
newline
bitfld.long 0x00 0. "LIN_MODE,LIN mode enable" "0,1"
group.long 0x104++0x03
line.long 0x00 "UART3_UART_LIN_RSP_LENGTH,LIN response length register(LIN_RSP_LENGTH)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "RSP_LENGTH,LIN response length register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x108++0x03
line.long 0x00 "UART3_UART_LIN_PID_VALUE,LIN PID register(LIN_PID_VALUE)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 0.--5. "PID,LIN PID register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x10C++0x03
line.long 0x00 "UART3_UART_LIN_CHECKSUM,LIN checksum register(LIN_CHECKSUM)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "CHECKSUM_TYPE,LIN checksum type" "0,1"
group.long 0x110++0x03
line.long 0x00 "UART3_UART_LIN_DEL_LENGTH,LIN delimiter field length(LIN_DEL_LENGTH)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,Reserved"
bitfld.long 0x00 0.--2. "LIN_DEL_LENGTH,LIN delimiter field length" "0,1,2,3,4,5,6,7"
group.long 0x114++0x03
line.long 0x00 "UART3_UART_LIN_PID_FILTER_0,LIN PID filter 0(LIN_PID_FILTER_0)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID3,filter PID3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID2,filter PID2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID1,filter PID1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID0,filter PID0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x118++0x03
line.long 0x00 "UART3_UART_LIN_PID_FILTER_1,LIN PID filter 1(LIN_PID_FILTER_1)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID7,filter PID7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID6,filter PID6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID5,filter PID5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID4,filter PID4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x11C++0x03
line.long 0x00 "UART3_UART_LIN_PID_FILTER_2,LIN PID filter 2(LIN_PID_FILTER_2)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID11,filter PID11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID10,filter PID10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID9,filter PID9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID8,filter PID8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x120++0x03
line.long 0x00 "UART3_UART_LIN_PID_FILTER_3,LIN PID filter 3(LIN_PID_FILTER_3)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID15,filter PID15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID14,filter PID14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID13,filter PID13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID12,filter PID12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x124++0x03
line.long 0x00 "UART3_UART_LIN_PID_FILTER_VAGUE,LIN PID filter vague(LIN_PID_FILTER_VAGUE)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID_VAGUE,vague filter PID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x128++0x03
line.long 0x00 "UART3_UART_LIN_PID_FILTER_CTRL,LIN PID filter ctrl register(LIN_PID_FILTER_CTRL)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 23. "LIN_FILTER_EN,the enable bit of the filter" "0,1"
bitfld.long 0x00 17.--22. "FID_VAGUE_MASK,he enable bit of the filter vague id" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.tbyte 0x00 0.--16. 1. "FID_MASK,the enable bit of the filter id 0-15"
tree.end
tree "UART4"
base ad:0x40071000
rgroup.long 0x00++0x03
line.long 0x00 "UART4_UART_RBR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "RBR_MSB,9th bit of rbr" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RBR_LSB,low 8bits of rbr"
rgroup.long 0x00++0x03
line.long 0x00 "UART4_UART_THR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "THR_MSB,the 9bit of Data to be transmitted" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "THR_LSB,low 8bits of thr"
rgroup.long 0x00++0x03
line.long 0x00 "UART4_UART_DLL,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_L,low 8bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART4_UART_DLH,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_H,high 8 bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART4_UART_IER,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "ASYNC_INT_EN,Async interrupt enable" "0,1"
bitfld.long 0x00 9. "RSP_DONE_INT_EN,response operation done interrupt enable" "0,1"
bitfld.long 0x00 8. "HEADER_DONE_INT_EN,header operation done interrupt enable" "0,1"
bitfld.long 0x00 7. "PTIME,Programmable THRE Interrupt Mode Enable" "0,1"
newline
bitfld.long 0x00 4.--6. "RSVD_6_4,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "EDSSI,Enable Modem Status Interrupt" "0,1"
bitfld.long 0x00 2. "ELSI,Enable Receiver Line Status Interrupt" "0,1"
bitfld.long 0x00 1. "ETBEI,Enable Transmit Holding Register Empty Interrupt" "0,1"
bitfld.long 0x00 0. "ERBFI,Enable Received Data Available Interrupt" "0,1"
rgroup.long 0x08++0x03
line.long 0x00 "UART4_UART_IIR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "FIFOSE,FIFOs Enabled" "0,1,2,3"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "IID,Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x08++0x03
line.long 0x00 "UART4_UART_FCR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "RCVR,receiver interrupt trigger" "0,1,2,3"
bitfld.long 0x00 4.--5. "TET,transmit empty threshold" "0,1,2,3"
bitfld.long 0x00 3. "DMAM,DMA Mode" "0,1"
bitfld.long 0x00 2. "XFIFOR,XMIT FIFO Reset" "0,1"
newline
bitfld.long 0x00 1. "RFIFOR,RCVR FIFO Reset" "0,1"
bitfld.long 0x00 0. "FIFOE,FIFO Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "UART4_UART_LCR,LIN Control Register(LIN_LCR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "DEBUG_EN,debug enable" "0,1"
bitfld.long 0x00 18. "AUTO_SYNC_EN,LIN baudrate auto sync enable" "0,1"
bitfld.long 0x00 17. "IDLE_DET_EN,idle detect enable" "0,1"
bitfld.long 0x00 14.--16. "IDLE_DET_LENGTH,idle detect lendth" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--13. "LBKM,the length of break in LIN mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "DLAB,Divisor Latch Access Bit" "0,1"
bitfld.long 0x00 6. "BC,Break Control Bit" "0,1"
bitfld.long 0x00 5. "STP,Stick Parity" "0,1"
newline
bitfld.long 0x00 4. "EPS,Even Parity Select" "0,1"
bitfld.long 0x00 3. "PEN,Parity Enable" "0,1"
bitfld.long 0x00 2. "STOP,Number of stop bits" "0,1"
bitfld.long 0x00 0.--1. "DLS,Data Length Select" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "UART4_UART_AFCR,Autoflow Control Register(LIN_AFCR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "SIRE,SIR Mode Enable" "0,1"
bitfld.long 0x00 5. "AFCE,Auto Flow Control Enable" "0,1"
bitfld.long 0x00 4. "LB,LoopBack Bit" "0,1"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
newline
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "RTS,Request to Send" "0,1"
bitfld.long 0x00 0. "RSVD_0,Reserved" "0,1"
rgroup.long 0x14++0x03
line.long 0x00 "UART4_UART_LSR,Line Status Register(LIN_LSR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "RSP_OP_DONE,response operation done flag" "0,1"
bitfld.long 0x00 14. "HEADER_OP_DONE,header operation done flag" "0,1"
bitfld.long 0x00 13. "TO_ERROR,timeout error" "0,1"
bitfld.long 0x00 12. "CHECKSUM_ERROR,checksum error flag" "0,1"
newline
bitfld.long 0x00 11. "PID_ERR,PID error" "0,1"
bitfld.long 0x00 10. "SYNC_FIELD_ERROR,sync field error" "0,1"
bitfld.long 0x00 9. "ASYNC_INT,Async interrupt flag" "0,1"
bitfld.long 0x00 8. "ADDR_RCVD,Address Received bit" "0,1"
bitfld.long 0x00 7. "RFE,Receiver FIFO Error bit" "0,1"
newline
bitfld.long 0x00 6. "TEMT,Transmitter Empty bit" "0,1"
bitfld.long 0x00 5. "THRE,Transmit Holding Register Empty bit" "0,1"
bitfld.long 0x00 4. "BI,Break Interrupt bit" "0,1"
bitfld.long 0x00 3. "FE,Framing Error bit" "0,1"
bitfld.long 0x00 2. "PE,Parity Error bit" "0,1"
newline
bitfld.long 0x00 1. "OE,Overrun error bit" "0,1"
bitfld.long 0x00 0. "DR,Data Ready bit" "0,1"
rgroup.long 0x18++0x03
line.long 0x00 "UART4_UART_MSR,Modem Status Register(LIN_MSR)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "CTS,clear to send" "0,1"
bitfld.long 0x00 0.--3. "RSVD_3_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x7C++0x03
line.long 0x00 "UART4_UART_USR,UART Status Register(LIN_USR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "BUSY,UART Busy" "0,1"
wgroup.long 0xA8++0x03
line.long 0x00 "UART4_UART_DMA_SA,DMA Software Acknowledge(LIN_DMA_SA)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "DMA_SA,Reserved" "0,1"
group.long 0xC0++0x03
line.long 0x00 "UART4_UART_FD,fraction divisor register(LIN_FD)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "FD,Fractional divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xC4++0x03
line.long 0x00 "UART4_UART_RAR,Receive Address Register (LIN_RAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "RAR,address matching"
group.long 0xC8++0x03
line.long 0x00 "UART4_UART_TAR,Transmit Address Register(LIN_TAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "TAR,address matching register during transmit mode"
group.long 0xCC++0x03
line.long 0x00 "UART4_UART_LCR_EXT,Line Extended Control Register(LIN_LCR_EXT)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "TRANSMIST_MODE,Transmit mode control bit" "0,1"
bitfld.long 0x00 2. "SEND_ADDR,Send address control bit" "0,1"
bitfld.long 0x00 1. "ADDR_MATCH,Address Match Mode" "0,1"
bitfld.long 0x00 0. "DLS_E,Extension for DLS" "0,1"
group.long 0x100++0x03
line.long 0x00 "UART4_LIN_CTL,LIN mode control register(LIN_CTL)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RSP_DIR,response operation direction" "0,1"
bitfld.long 0x00 3. "RSP_OP_START,response operation start trigger" "0,1"
bitfld.long 0x00 2. "HEADER_OP_START,header operation start trigger" "0,1"
bitfld.long 0x00 1. "MASTER_MODE,master mode" "0,1"
newline
bitfld.long 0x00 0. "LIN_MODE,LIN mode enable" "0,1"
group.long 0x104++0x03
line.long 0x00 "UART4_UART_LIN_RSP_LENGTH,LIN response length register(LIN_RSP_LENGTH)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "RSP_LENGTH,LIN response length register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x108++0x03
line.long 0x00 "UART4_UART_LIN_PID_VALUE,LIN PID register(LIN_PID_VALUE)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 0.--5. "PID,LIN PID register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x10C++0x03
line.long 0x00 "UART4_UART_LIN_CHECKSUM,LIN checksum register(LIN_CHECKSUM)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "CHECKSUM_TYPE,LIN checksum type" "0,1"
group.long 0x110++0x03
line.long 0x00 "UART4_UART_LIN_DEL_LENGTH,LIN delimiter field length(LIN_DEL_LENGTH)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,Reserved"
bitfld.long 0x00 0.--2. "LIN_DEL_LENGTH,LIN delimiter field length" "0,1,2,3,4,5,6,7"
group.long 0x114++0x03
line.long 0x00 "UART4_UART_LIN_PID_FILTER_0,LIN PID filter 0(LIN_PID_FILTER_0)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID3,filter PID3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID2,filter PID2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID1,filter PID1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID0,filter PID0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x118++0x03
line.long 0x00 "UART4_UART_LIN_PID_FILTER_1,LIN PID filter 1(LIN_PID_FILTER_1)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID7,filter PID7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID6,filter PID6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID5,filter PID5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID4,filter PID4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x11C++0x03
line.long 0x00 "UART4_UART_LIN_PID_FILTER_2,LIN PID filter 2(LIN_PID_FILTER_2)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID11,filter PID11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID10,filter PID10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID9,filter PID9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID8,filter PID8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x120++0x03
line.long 0x00 "UART4_UART_LIN_PID_FILTER_3,LIN PID filter 3(LIN_PID_FILTER_3)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID15,filter PID15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID14,filter PID14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID13,filter PID13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID12,filter PID12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x124++0x03
line.long 0x00 "UART4_UART_LIN_PID_FILTER_VAGUE,LIN PID filter vague(LIN_PID_FILTER_VAGUE)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID_VAGUE,vague filter PID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x128++0x03
line.long 0x00 "UART4_UART_LIN_PID_FILTER_CTRL,LIN PID filter ctrl register(LIN_PID_FILTER_CTRL)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 23. "LIN_FILTER_EN,the enable bit of the filter" "0,1"
bitfld.long 0x00 17.--22. "FID_VAGUE_MASK,he enable bit of the filter vague id" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.tbyte 0x00 0.--16. 1. "FID_MASK,the enable bit of the filter id 0-15"
tree.end
tree "UART5"
base ad:0x40072000
rgroup.long 0x00++0x03
line.long 0x00 "UART5_UART_RBR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "RBR_MSB,9th bit of rbr" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RBR_LSB,low 8bits of rbr"
rgroup.long 0x00++0x03
line.long 0x00 "UART5_UART_THR,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 9.--31. 1. "RSVD_31_9,Reserved"
bitfld.long 0x00 8. "THR_MSB,the 9bit of Data to be transmitted" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "THR_LSB,low 8bits of thr"
rgroup.long 0x00++0x03
line.long 0x00 "UART5_UART_DLL,Receive Buffer Register(LIN_RBR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_L,low 8bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART5_UART_DLH,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "DL_H,high 8 bits of divisor register"
group.long 0x04++0x03
line.long 0x00 "UART5_UART_IER,Divisor Latch High(LIN_DLH)"
hexmask.long.tbyte 0x00 11.--31. 1. "RSVD_31_11,Reserved"
bitfld.long 0x00 10. "ASYNC_INT_EN,Async interrupt enable" "0,1"
bitfld.long 0x00 9. "RSP_DONE_INT_EN,response operation done interrupt enable" "0,1"
bitfld.long 0x00 8. "HEADER_DONE_INT_EN,header operation done interrupt enable" "0,1"
bitfld.long 0x00 7. "PTIME,Programmable THRE Interrupt Mode Enable" "0,1"
newline
bitfld.long 0x00 4.--6. "RSVD_6_4,Reserved" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "EDSSI,Enable Modem Status Interrupt" "0,1"
bitfld.long 0x00 2. "ELSI,Enable Receiver Line Status Interrupt" "0,1"
bitfld.long 0x00 1. "ETBEI,Enable Transmit Holding Register Empty Interrupt" "0,1"
bitfld.long 0x00 0. "ERBFI,Enable Received Data Available Interrupt" "0,1"
rgroup.long 0x08++0x03
line.long 0x00 "UART5_UART_IIR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "FIFOSE,FIFOs Enabled" "0,1,2,3"
bitfld.long 0x00 4.--5. "RSVD_5_4,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--3. "IID,Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x08++0x03
line.long 0x00 "UART5_UART_FCR,Interrupt Identity Register(LIN_IIR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 6.--7. "RCVR,receiver interrupt trigger" "0,1,2,3"
bitfld.long 0x00 4.--5. "TET,transmit empty threshold" "0,1,2,3"
bitfld.long 0x00 3. "DMAM,DMA Mode" "0,1"
bitfld.long 0x00 2. "XFIFOR,XMIT FIFO Reset" "0,1"
newline
bitfld.long 0x00 1. "RFIFOR,RCVR FIFO Reset" "0,1"
bitfld.long 0x00 0. "FIFOE,FIFO Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "UART5_UART_LCR,LIN Control Register(LIN_LCR)"
hexmask.long.word 0x00 20.--31. 1. "RSVD_31_20,Reserved"
bitfld.long 0x00 19. "DEBUG_EN,debug enable" "0,1"
bitfld.long 0x00 18. "AUTO_SYNC_EN,LIN baudrate auto sync enable" "0,1"
bitfld.long 0x00 17. "IDLE_DET_EN,idle detect enable" "0,1"
bitfld.long 0x00 14.--16. "IDLE_DET_LENGTH,idle detect lendth" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--13. "LBKM,the length of break in LIN mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8. "RSVD_8,Reserved" "0,1"
bitfld.long 0x00 7. "DLAB,Divisor Latch Access Bit" "0,1"
bitfld.long 0x00 6. "BC,Break Control Bit" "0,1"
bitfld.long 0x00 5. "STP,Stick Parity" "0,1"
newline
bitfld.long 0x00 4. "EPS,Even Parity Select" "0,1"
bitfld.long 0x00 3. "PEN,Parity Enable" "0,1"
bitfld.long 0x00 2. "STOP,Number of stop bits" "0,1"
bitfld.long 0x00 0.--1. "DLS,Data Length Select" "0,1,2,3"
group.long 0x10++0x03
line.long 0x00 "UART5_UART_AFCR,Autoflow Control Register(LIN_AFCR)"
hexmask.long 0x00 7.--31. 1. "RSVD_31_7,Reserved"
bitfld.long 0x00 6. "SIRE,SIR Mode Enable" "0,1"
bitfld.long 0x00 5. "AFCE,Auto Flow Control Enable" "0,1"
bitfld.long 0x00 4. "LB,LoopBack Bit" "0,1"
bitfld.long 0x00 3. "RSVD_3,Reserved" "0,1"
newline
bitfld.long 0x00 2. "RSVD_2,Reserved" "0,1"
bitfld.long 0x00 1. "RTS,Request to Send" "0,1"
bitfld.long 0x00 0. "RSVD_0,Reserved" "0,1"
rgroup.long 0x14++0x03
line.long 0x00 "UART5_UART_LSR,Line Status Register(LIN_LSR)"
hexmask.long.word 0x00 16.--31. 1. "RSVD_31_16,Reserved"
bitfld.long 0x00 15. "RSP_OP_DONE,response operation done flag" "0,1"
bitfld.long 0x00 14. "HEADER_OP_DONE,header operation done flag" "0,1"
bitfld.long 0x00 13. "TO_ERROR,timeout error" "0,1"
bitfld.long 0x00 12. "CHECKSUM_ERROR,checksum error flag" "0,1"
newline
bitfld.long 0x00 11. "PID_ERR,PID error" "0,1"
bitfld.long 0x00 10. "SYNC_FIELD_ERROR,sync field error" "0,1"
bitfld.long 0x00 9. "ASYNC_INT,Async interrupt flag" "0,1"
bitfld.long 0x00 8. "ADDR_RCVD,Address Received bit" "0,1"
bitfld.long 0x00 7. "RFE,Receiver FIFO Error bit" "0,1"
newline
bitfld.long 0x00 6. "TEMT,Transmitter Empty bit" "0,1"
bitfld.long 0x00 5. "THRE,Transmit Holding Register Empty bit" "0,1"
bitfld.long 0x00 4. "BI,Break Interrupt bit" "0,1"
bitfld.long 0x00 3. "FE,Framing Error bit" "0,1"
bitfld.long 0x00 2. "PE,Parity Error bit" "0,1"
newline
bitfld.long 0x00 1. "OE,Overrun error bit" "0,1"
bitfld.long 0x00 0. "DR,Data Ready bit" "0,1"
rgroup.long 0x18++0x03
line.long 0x00 "UART5_UART_MSR,Modem Status Register(LIN_MSR)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "CTS,clear to send" "0,1"
bitfld.long 0x00 0.--3. "RSVD_3_0,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x7C++0x03
line.long 0x00 "UART5_UART_USR,UART Status Register(LIN_USR)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "BUSY,UART Busy" "0,1"
wgroup.long 0xA8++0x03
line.long 0x00 "UART5_UART_DMA_SA,DMA Software Acknowledge(LIN_DMA_SA)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "DMA_SA,Reserved" "0,1"
group.long 0xC0++0x03
line.long 0x00 "UART5_UART_FD,fraction divisor register(LIN_FD)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "FD,Fractional divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xC4++0x03
line.long 0x00 "UART5_UART_RAR,Receive Address Register (LIN_RAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "RAR,address matching"
group.long 0xC8++0x03
line.long 0x00 "UART5_UART_TAR,Transmit Address Register(LIN_TAR)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 0.--7. 1. "TAR,address matching register during transmit mode"
group.long 0xCC++0x03
line.long 0x00 "UART5_UART_LCR_EXT,Line Extended Control Register(LIN_LCR_EXT)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 3. "TRANSMIST_MODE,Transmit mode control bit" "0,1"
bitfld.long 0x00 2. "SEND_ADDR,Send address control bit" "0,1"
bitfld.long 0x00 1. "ADDR_MATCH,Address Match Mode" "0,1"
bitfld.long 0x00 0. "DLS_E,Extension for DLS" "0,1"
group.long 0x100++0x03
line.long 0x00 "UART5_LIN_CTL,LIN mode control register(LIN_CTL)"
hexmask.long 0x00 5.--31. 1. "RSVD_31_5,Reserved"
bitfld.long 0x00 4. "RSP_DIR,response operation direction" "0,1"
bitfld.long 0x00 3. "RSP_OP_START,response operation start trigger" "0,1"
bitfld.long 0x00 2. "HEADER_OP_START,header operation start trigger" "0,1"
bitfld.long 0x00 1. "MASTER_MODE,master mode" "0,1"
newline
bitfld.long 0x00 0. "LIN_MODE,LIN mode enable" "0,1"
group.long 0x104++0x03
line.long 0x00 "UART5_UART_LIN_RSP_LENGTH,LIN response length register(LIN_RSP_LENGTH)"
hexmask.long 0x00 4.--31. 1. "RSVD_31_4,Reserved"
bitfld.long 0x00 0.--3. "RSP_LENGTH,LIN response length register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x108++0x03
line.long 0x00 "UART5_UART_LIN_PID_VALUE,LIN PID register(LIN_PID_VALUE)"
hexmask.long 0x00 6.--31. 1. "RSVD_31_6,Reserved"
bitfld.long 0x00 0.--5. "PID,LIN PID register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x10C++0x03
line.long 0x00 "UART5_UART_LIN_CHECKSUM,LIN checksum register(LIN_CHECKSUM)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
hexmask.long.byte 0x00 1.--7. 1. "RSVD_7_1,Reserved"
bitfld.long 0x00 0. "CHECKSUM_TYPE,LIN checksum type" "0,1"
group.long 0x110++0x03
line.long 0x00 "UART5_UART_LIN_DEL_LENGTH,LIN delimiter field length(LIN_DEL_LENGTH)"
hexmask.long 0x00 3.--31. 1. "RSVD_31_3,Reserved"
bitfld.long 0x00 0.--2. "LIN_DEL_LENGTH,LIN delimiter field length" "0,1,2,3,4,5,6,7"
group.long 0x114++0x03
line.long 0x00 "UART5_UART_LIN_PID_FILTER_0,LIN PID filter 0(LIN_PID_FILTER_0)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID3,filter PID3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID2,filter PID2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID1,filter PID1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID0,filter PID0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x118++0x03
line.long 0x00 "UART5_UART_LIN_PID_FILTER_1,LIN PID filter 1(LIN_PID_FILTER_1)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID7,filter PID7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID6,filter PID6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID5,filter PID5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID4,filter PID4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x11C++0x03
line.long 0x00 "UART5_UART_LIN_PID_FILTER_2,LIN PID filter 2(LIN_PID_FILTER_2)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID11,filter PID11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID10,filter PID10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID9,filter PID9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID8,filter PID8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x120++0x03
line.long 0x00 "UART5_UART_LIN_PID_FILTER_3,LIN PID filter 3(LIN_PID_FILTER_3)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 24.--29. "FID15,filter PID15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "RSVD_23_22,Reserved" "0,1,2,3"
bitfld.long 0x00 16.--21. "FID14,filter PID14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 14.--15. "RSVD_15_14,Reserved" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "FID13,filter PID13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--7. "RSVD_7_6,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID12,filter PID12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x124++0x03
line.long 0x00 "UART5_UART_LIN_PID_FILTER_VAGUE,LIN PID filter vague(LIN_PID_FILTER_VAGUE)"
bitfld.long 0x00 30.--31. "RSVD_31_30,Reserved" "0,1,2,3"
bitfld.long 0x00 0.--5. "FID_VAGUE,vague filter PID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x128++0x03
line.long 0x00 "UART5_UART_LIN_PID_FILTER_CTRL,LIN PID filter ctrl register(LIN_PID_FILTER_CTRL)"
hexmask.long.byte 0x00 24.--31. 1. "RSVD_31_24,Reserved"
bitfld.long 0x00 23. "LIN_FILTER_EN,the enable bit of the filter" "0,1"
bitfld.long 0x00 17.--22. "FID_VAGUE_MASK,he enable bit of the filter vague id" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.tbyte 0x00 0.--16. 1. "FID_MASK,the enable bit of the filter id 0-15"
tree.end
tree.end
tree "WDOG (Watchdog Timer Unit)"
base ad:0x40052000
rgroup.long 0x00++0x03
line.long 0x00 "WDOG_VERID,Watchdog Version Idenfication(WDOG_VERID)"
hexmask.long.tbyte 0x00 8.--31. 1. "RSVD_31_8,Reserved"
bitfld.long 0x00 4.--7. "MAJOR,Major version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "MINOR,Minor version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x04++0x03
line.long 0x00 "WDOG_PARAM,Watchdog Parameter(WDOG_PARAM)"
hexmask.long 0x00 1.--31. 1. "RSVD_31_1,Reserved"
bitfld.long 0x00 0. "INT_PRESENT,Interrrupt function is present" "0,1"
group.long 0x08++0x03
line.long 0x00 "WDOG_CS,Watchdog Control and Status Registers(WDOG_CS)"
bitfld.long 0x00 27.--31. "RSVD_31_27,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 26. "INTF,Counter overflow interrupt flag" "0,1"
bitfld.long 0x00 25. "UNLKF,Flag indcates all registers are locked or unlocked" "0,1"
bitfld.long 0x00 24. "CFGUF,Flag indcates configuration update is accompished" "0,1"
bitfld.long 0x00 19.--23. "RSVD_23_19,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--18. "TSTM,Fast test mode" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--15. "RSVD_15_10,Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 8.--9. "CLKS,wdog clock source" "0,1,2,3"
newline
bitfld.long 0x00 7. "RSVD_7,Reserved" "0,1"
bitfld.long 0x00 6. "CFGUA,Configuration update allow" "0,1"
bitfld.long 0x00 5. "WINE,Watchdog window mode enable" "0,1"
bitfld.long 0x00 4. "INTE,Watchdog interrupt enable" "0,1"
bitfld.long 0x00 3. "STOPE,Watchdog counter enabled in stop mode" "0,1"
bitfld.long 0x00 2. "WAITE,Watchdog counter enabled in wait mode" "0,1"
bitfld.long 0x00 1. "DEBUGE,Watchdog counter enabled in debug mode" "0,1"
bitfld.long 0x00 0. "WDOGE,Watchdog enabled" "0,1"
group.long 0x0C++0x03
line.long 0x00 "WDOG_TMO,Watchdog Timeout Register(WDOG_TMO)"
hexmask.long 0x00 0.--31. 1. "TMO,Watchdog Timeout Value"
group.long 0x10++0x03
line.long 0x00 "WDOG_WIN,Watchdog Window Register(WDOG_WIN)"
hexmask.long 0x00 0.--31. 1. "WIN,Watchdog Window value"
group.long 0x14++0x03
line.long 0x00 "WDOG_CNT,Watchdog Counter Register(WDOG_CNT)"
hexmask.long 0x00 0.--31. 1. "CNT,Watchdog counter value"
tree.end
autoindent.off
newline