; --------------------------------------------------------------------------------
; @Title: TLE984x On-Chip Peripherals
; @Props: Released
; @Author: AST, WWE, RSA, JDU, NEJ
; @Changelog: 2016-10-03 WWE
;             2022-02-22 RSA
;             2023-03-06 JDU
;             2023-11-06 NEJ
; @Manufacturer: INFINEON - Infineon Technologies AG
; @Doc: Generated (TRACE32, build: 164232.), based on:
;       TLE984x.svd (Ver. 1.9.5)
; @Core: Cortex-M0
; @Chip: TLE98422QX, TLE9842QX, TLE98432QX, TLE9843QX, TLE98442QX, TLE9844QX,
;        TLE9845QX
; @Copyright: (C) 1989-2023 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: pertle984x.per 16952 2023-11-08 13:36:10Z kwisniewski $

AUTOINDENT.ON CENTER TREE
ENUMDELIMITER ","
base ad:0x0
tree.close "Core Registers (Cortex-M0)"
AUTOINDENT.PUSH
AUTOINDENT.OFF
tree "System Control"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 0x8
if (CORENAME()=="CORTEXM1")
group.long 0x10++0x0b
line.long 0x00 "STCSR,SysTick Control and Status Register"
bitfld.long 0x00 16. " COUNTFLAG    ,Returns 1 if timer counted to 0" "0,1"
bitfld.long 0x00 2.  "                CLKSOURCE     ,Always reads as one" "No effect,Processor clock"
textline "                 "
bitfld.long 0x00 1.  " TICKINT      ,Counting down to 0 " "No SysTick,SysTick"
bitfld.long 0x00 0.  "       ENABLE        ,Counter enable" "Disabled,Enabled"
line.long 0x04 "STRVR,SysTick Reload Value Register"
hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD       ,Value to load into the STCVR when the counter reaches 0"
line.long 0x08 "STCVR,SysTick Current Value Register"
hexmask.long.tbyte 0x08 0.--23. 1. " CURRENT      ,Reads return the current value of the SysTick counter"
else
group.long 0x10++0x0b
line.long 0x00 "STCSR,SysTick Control and Status Register"
bitfld.long 0x00 16. " COUNTFLAG    ,Returns 1 if timer counted to 0" "0,1"
bitfld.long 0x00 2.  "                CLKSOURCE     ,Always reads as one" "External clock,Processor clock"
textline "                 "
bitfld.long 0x00 1.  " TICKINT      ,Counting down to 0 " "No SysTick,SysTick"
bitfld.long 0x00 0.  "       ENABLE        ,Counter enable" "Disabled,Enabled"
line.long 0x04 "STRVR,SysTick Reload Value Register"
hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD       ,Value to load into the STCVR when the counter reaches 0"
line.long 0x08 "STCVR,SysTick Current Value Register"
hexmask.long.tbyte 0x08 0.--23. 1. " CURRENT      ,Reads return the current value of the SysTick counter"
endif
if (CORENAME()=="CORTEXM1")
rgroup.long 0x1c++0x03
line.long 0x00 "STCR,SysTick Calibration Value Register"
bitfld.long 0x00 31. " NOREF        ,Reads as one" "0,1"
bitfld.long 0x00 30. "                SKEW          ,Reads as zero" "0,1"
textline "                 "
hexmask.long.tbyte 0x00 0.--23. 1. " TENMS        ,Indicates calibration value is not known"
else
rgroup.long 0x1c++0x03
line.long 0x00 "STCR,SysTick Calibration Value Register"
bitfld.long 0x00 31. " NOREF        ,Indicates whether the IMPL_DEF reference clock is provided" "Implemented,Not implemented"
bitfld.long 0x00 30. "  SKEW          ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact"
textline "                 "
hexmask.long.tbyte 0x00 0.--23. 1. " TENMS        ,Holds a reload value to be used for 10ms (100Hz) timing subject to system clock skew errors"
endif
rgroup.long 0xd00++0x03
line.long 0x00 "CPUID,CPU ID Base Register"
hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER  ,Implementer code"
hexmask.long.byte 0x00 20.--23. 1. "               VARIANT       ,Implementation defined variant number"
textline "                 "
hexmask.long.byte 0x00 4.--15. 1.  " PARTNO       ,Number of processor within family"
hexmask.long.byte 0x00 0.--3. 1. "               REVISION      ,Implementation defined revision number"
group.long 0xd04++0x03
line.long 0x00 "ICSR,Interrupt Control State Register"
bitfld.long 0x00 31. " NMIPENDSET   ,Setting this bit will activate an NMI" "No effect,Set pending"
bitfld.long 0x00 28. "      PENDSVSET     ,Set a pending PendSV interrupt" "No effect,Set pending"
textline "                 "
bitfld.long 0x00 27. " PENDSVCLR    ,Clear a pending PendSV interrupt" "No effect,Clear pending"
bitfld.long 0x00 26. "    PENDSTSET     ,Set a pending SysTick" "No effect,Set pending"
textline "                 "
bitfld.long 0x00 25. " PENDSVCLR    ,Clear a pending SysTick" "No effect,Clear pending"
bitfld.long 0x00 23. "    ISRPREEMPT    ,Pending exception service" "No service,Service"
textline "                 "
bitfld.long 0x00 22. " ISRPENDING   ,External interrupt pending flag" "No interrupt,Interrupt"
hexmask.long.byte 0x00 12.--17. 1. "     VECTPENDING   ,Active exception number field"
textline "                 "
hexmask.long.byte 0x00 0.--5. 1.  " VECTACTIVET  ,Active exception number field"
if (CORENAME()=="CORTEXM0+")
group.long 0xd08++0x03
line.long 0x00 "VTOR,Vector Table Offset Register"
hexmask.long 0x00 7.--31. 0x80 " TBLOFF       ,Vector table address"
else
textline "                 "
endif
group.long 0xd0c++0x03
line.long 0x00 "AIRCR,Application Interrupt and Reset Control Register"
hexmask.long.word 0x00 16.--31. 1. " VECTKEY      ,Vector Key"
bitfld.long 0x00 15. "             ENDIANNESS    ,Data endianness bit" "Little-endian,Big-endian"
textline "                 "
bitfld.long 0x00 2. " SYSRESETREQ  ,System reset setup request" "No effect,Reset"
bitfld.long 0x00 1. "        VECTCLRACTIVE ,Clears all active state information" "No clear,Clear"
group.long 0xd10++0x03
line.long 0x00 "SCR,System Control Register"
bitfld.long 0x00 4. " SEVONPEND    ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup"
bitfld.long 0x00 2. "       SLEEPDEEP     ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep"
textline "                 "
bitfld.long 0x00 1. " SLEEPONEXIT  ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled"
rgroup.long 0xd14++0x03
line.long 0x00 "CCR,Configuration and Control Register"
bitfld.long 0x00 9. " STKALIGN     ,Indicates whether on exception entry all exceptions are entered with 8-byte stack alignment and the context to restore it is saved" "Reserved,Aligned"
bitfld.long 0x00 3. "         UNALIGN_TRP   ,Indicates that all unaligned accesses results in a Hard Fault" "Reserved,Trapped"
group.long 0xd1c++0x0b
line.long 0x00 "SHPR2,System Handler Priority Register 2"
bitfld.long 0x00 30.--31. " PRI_11       ,Priority of system handler 11-SVCall" "00,01,10,11"
line.long 0x04 "SHPR3,System Handler Priority Register 3"
bitfld.long 0x04 30.--31. " PRI_15       ,Priority of system handler 15-SysTick" "00,01,10,11"
bitfld.long 0x04 22.--23. "               PRI_14        ,Priority of system handler 14- PendSV" "00,01,10,11"
line.long 0x08 "SHCSR,System Handler Control and State Register"
bitfld.long 0x08 15. " SVCALLPENDED ,Reads as 1 if SVCall is pending" "Not pending,Pending"
if (CORENAME()=="CORTEXM0+")
hgroup.long 0x08++0x03
hide.long 0x00 "ACTLR,Auxiliary Control Register"
else
textline "                 "
endif
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Nested Vectored Interrupt Controller (NVIC)"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 12.
tree "Interrupt Enable Registers"
group.long 0x100++0x03
line.long 0x00 "SET/CLREN,Interrupt Set/Clear Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "     SET/CLRENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "     SET/CLRENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "     SET/CLRENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "     SET/CLRENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "     SET/CLRENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "     SET/CLRENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "     SET/CLRENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "     SET/CLRENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "     SET/CLRENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "     SET/CLRENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "     SET/CLRENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "     SET/CLRENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "     SET/CLRENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "     SET/CLRENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "     SET/CLRENA9  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "     SET/CLRENA8  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENA7  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "     SET/CLRENA6  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "     SET/CLRENA5  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENA4  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "     SET/CLRENA3  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "     SET/CLRENA2  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                     "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENA1  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "     SET/CLRENA0  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
tree.end
tree "Interrupt Pending Registers"
group.long 0x200++0x03
line.long 0x00 "SET/CLRPEN,Interrupt Set/Clear Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEN9  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEN8  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEN7  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEN6  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEN5  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEN4  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEN3  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEN2  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                     "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEN1  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEN0  ,Interrupt Set/Clear Pending" "Not pending,Pending"
tree.end
width 6.
tree "Interrupt Priority Registers"
group.long 0x400++0x1F
line.long 0x00 "INT0,Interrupt Priority Register"
bitfld.long 0x00 30.--31. " IP_3  ,Priority of interrupt 3" "0,1,2,3"
bitfld.long 0x00 22.--23. "  IP_2  ,Priority of interrupt 2" "0,1,2,3"
bitfld.long 0x00 14.--15. "  IP_1  ,Priority of interrupt 1" "0,1,2,3"
bitfld.long 0x00 6.--7.   "  IP_0  ,Priority of interrupt 0" "0,1,2,3"
line.long 0x04 "INT1,Interrupt Priority Register"
bitfld.long 0x04 30.--31. " IP_7  ,Priority of interrupt 7" "0,1,2,3"
bitfld.long 0x04 22.--23. "  IP_6  ,Priority of interrupt 6" "0,1,2,3"
bitfld.long 0x04 14.--15. "  IP_5  ,Priority of interrupt 5" "0,1,2,3"
bitfld.long 0x04 6.--7.   "  IP_4  ,Priority of interrupt 4" "0,1,2,3"
line.long 0x08 "INT2,Interrupt Priority Register"
bitfld.long 0x08 30.--31. " IP_11 ,Priority of interrupt 11" "0,1,2,3"
bitfld.long 0x08 22.--23. "  IP_10 ,Priority of interrupt 10" "0,1,2,3"
bitfld.long 0x08 14.--15. "  IP_9  ,Priority of interrupt 9" "0,1,2,3"
bitfld.long 0x08 6.--7.   "  IP_8  ,Priority of interrupt 8" "0,1,2,3"
line.long 0x0C "INT3,Interrupt Priority Register"
bitfld.long 0x0C 30.--31. " IP_15 ,Priority of interrupt 15" "0,1,2,3"
bitfld.long 0x0C 22.--23. "  IP_14 ,Priority of interrupt 14" "0,1,2,3"
bitfld.long 0x0C 14.--15. "  IP_13 ,Priority of interrupt 13" "0,1,2,3"
bitfld.long 0x0C 6.--7.   "  IP_12 ,Priority of interrupt 12" "0,1,2,3"
line.long 0x10 "INT4,Interrupt Priority Register"
bitfld.long 0x10 30.--31. " IP_19 ,Priority of interrupt 19" "0,1,2,3"
bitfld.long 0x10 22.--23. "  IP_18 ,Priority of interrupt 18" "0,1,2,3"
bitfld.long 0x10 14.--15. "  IP_17 ,Priority of interrupt 17" "0,1,2,3"
bitfld.long 0x10 6.--7.   "  IP_16 ,Priority of interrupt 16" "0,1,2,3"
line.long 0x14 "INT5,Interrupt Priority Register"
bitfld.long 0x14 30.--31. " IP_23 ,Priority of interrupt 23" "0,1,2,3"
bitfld.long 0x14 22.--23. "  IP_22 ,Priority of interrupt 22" "0,1,2,3"
bitfld.long 0x14 14.--15. "  IP_21 ,Priority of interrupt 21" "0,1,2,3"
bitfld.long 0x14 6.--7.   "  IP_20 ,Priority of interrupt 20" "0,1,2,3"
line.long 0x18 "INT6,Interrupt Priority Register"
bitfld.long 0x18 30.--31. " IP_27 ,Priority of interrupt 27" "0,1,2,3"
bitfld.long 0x18 22.--23. "  IP_26 ,Priority of interrupt 26" "0,1,2,3"
bitfld.long 0x18 14.--15. "  IP_25 ,Priority of interrupt 25" "0,1,2,3"
bitfld.long 0x18 6.--7.   "  IP_24 ,Priority of interrupt 24" "0,1,2,3"
line.long 0x1C "INT7,Interrupt Priority Register"
bitfld.long 0x1C 30.--31. " IP_31 ,Priority of interrupt 31" "0,1,2,3"
bitfld.long 0x1C 22.--23. "  IP_30 ,Priority of interrupt 30" "0,1,2,3"
bitfld.long 0x1C 14.--15. "  IP_29 ,Priority of interrupt 29" "0,1,2,3"
bitfld.long 0x1C 6.--7.   "  IP_28 ,Priority of interrupt 28" "0,1,2,3"
tree.end
width 0x0B
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Debug"
tree "Core Debug"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 0xA
group.long 0xD30++0x03
line.long 0x00 "DFSR,Data Fault Status Register"
eventfld.long 0x00 4. " EXTERNAL          ,External debug request flag" "No occurred,Occurred"
eventfld.long 0x00 3. "    VCATCH             ,Vector catch flag" "No occurred,Occurred"
textline "                   "
eventfld.long 0x00 2. " DWTRAP            ,Data Watchpoint flag" "No match,Match"
textline "                   "
eventfld.long 0x00 1. " BKPT              ,BKPT flag" "No match,Match"
eventfld.long 0x00 0. "       HALTED             ,Halt request flag" "No request,Request"
if (CORENAME()=="CORTEXM1")
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDF0))&0x01)==0x00)
group.long 0xDF0++0x03
line.long 0x00 "DHCSR,Debug Halting Control and Status Register"
bitfld.long 0x00 31. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 30. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 29. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 28. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 27. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 26. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset"
bitfld.long 0x00 24. "       S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not completed,Completed"
textline "                   "
bitfld.long 0x00 23. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 22. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 21. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 20. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 19. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 18. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 17. " S_HALT/DBGKEY     ,Core Halted Status/Debug Key" "Not halted,Halted"
bitfld.long 0x00 16. "     S_REGRDY/DBGKEY    ,Register R/W on the Debug Core Register Selector/Debug Key" "Not available,Available"
textline "                   "
textline "                   "
textfld "                                 "
bitfld.long 0x00 0. " C_DEBUGEN          ,Debug Enable" "Disabled,Enabled"
else
group.long 0xDF0++0x03
line.long 0x00 "DHCSR,Debug Halting Control and Status Register"
bitfld.long 0x00 31. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 30. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 29. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 28. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 27. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 26. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset"
bitfld.long 0x00 24. "       S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not read,Read"
textline "                   "
bitfld.long 0x00 23. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 22. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 21. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 20. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 19. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 18. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 17. " S_HALT/DBGKEY     ,Core Halted Status/Debug Key" "Not halted,Halted"
bitfld.long 0x00 16. "     S_REGRDY/DBGKEY    ,Register R/W on the Debug Core Register Selector/Debug Key" "Not available,Available"
textline "                   "
bitfld.long 0x00 3. " C_MASKINTS        ,Interrupts Mask" "Not masked,Masked"
bitfld.long 0x00 2. "     C_STEP             ,Steps the core in halted debug" "Not halted,Halted"
textline "                   "
bitfld.long 0x00 1. " C_HALT            ,Core Halted" "Not halted,Halted"
bitfld.long 0x00 0. "     C_DEBUGEN          ,Debug Enable" "Disabled,Enabled"
endif
else
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDF0))&0x01)==0x00)
group.long 0xDF0++0x03
line.long 0x00 "DHCSR,Debug Halting Control and Status Register"
bitfld.long 0x00 31. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 30. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 29. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 28. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 27. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 26. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset"
bitfld.long 0x00 24. "       S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not completed,Completed"
textline "                   "
bitfld.long 0x00 23. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 22. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 21. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 20. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 19. " S_LOCKUP/DBGKEY   ,Core Lockup Status/Debug Key" "Not locked up,Locked up"
bitfld.long 0x00 18. "  S_SLEEP/DBGKEY     ,Core Sleep Status/Debug Key" "Not sleeping,Sleeping"
textline "                   "
bitfld.long 0x00 17. " S_HALT/DBGKEY     ,Core Halted Status/Debug Key" "Not halted,Halted"
bitfld.long 0x00 16. "     S_REGRDY/DBGKEY    ,Register R/W on the Debug Core Register Selector/Debug Key" "Not available,Available"
textline "                   "
textline "                   "
textfld "                                 "
bitfld.long 0x00 0. " C_DEBUGEN          ,Debug Enable" "Disabled,Enabled"
else
group.long 0xDF0++0x03
line.long 0x00 "DHCSR,Debug Halting Control and Status Register"
bitfld.long 0x00 31. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 30. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 29. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 28. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 27. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 26. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset"
bitfld.long 0x00 24. "       S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not read,Read"
textline "                   "
bitfld.long 0x00 23. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 22. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 21. " DBGKEY            ,Debug Key" "0,1"
bitfld.long 0x00 20. "              DBGKEY             ,Debug Key" "0,1"
textline "                   "
bitfld.long 0x00 19. " S_LOCKUP/DBGKEY   ,Core Lockup Status/Debug Key" "Not locked up,Locked up"
bitfld.long 0x00 18. "  S_SLEEP/DBGKEY     ,Core Sleep Status/Debug Key" "Not sleeping,Sleeping"
textline "                   "
bitfld.long 0x00 17. " S_HALT/DBGKEY     ,Core Halted Status/Debug Key" "Not halted,Halted"
bitfld.long 0x00 16. "     S_REGRDY/DBGKEY    ,Register R/W on the Debug Core Register Selector/Debug Key" "Not available,Available"
textline "                   "
bitfld.long 0x00 3. " C_MASKINTS        ,Interrupts Mask" "Not masked,Masked"
bitfld.long 0x00 2. "     C_STEP             ,Steps the core in halted debug" "Not halted,Halted"
textline "                   "
bitfld.long 0x00 1. " C_HALT            ,Core Halted" "Not halted,Halted"
bitfld.long 0x00 0. "     C_DEBUGEN          ,Debug Enable" "Disabled,Enabled"
endif
endif
wgroup.long 0xDF4++0x03
line.long 0x00 "DCRSR,Debug Core Selector Register"
bitfld.long 0x00 16. " REGWnR            ,Register Read/Write" "Read,Write"
bitfld.long 0x00 0.--4. "          REGSEL             ,Register Selection" "R0,R1,R2,R3,R4,R5,R6,R7,R8,R9,R10,R11,R12,Current SP,LR,DebugReturnAddress,xPSR Flags,MSP,PSP,Reserved,CONTROL[1]/PRIMASK[0],?..."
group.long 0xDF8++0x07
line.long 0x00 "DCRDR,Debug Core Register Data Register"
hexmask.long 0x00 0.--31. 1. " DATA              ,Data for reading and writing registers to and from the processor"
line.long 0x04 "DEMCR,Debug Exception and Monitor Control Register"
bitfld.long 0x04 24. " DWTENA            ,Global enable or disable for the DW unit" "Disabled,Enabled"
bitfld.long 0x04 10. "       VC_HARDERR         ,Debug trap on a Hard Fault" "No error,Error"
textline "                   "
bitfld.long 0x04 0.  " VC_CORERESET      ,Reset Vector Catch" "No reset,Reset"
width 0x0B
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Breakpoint Unit (BPU)"
sif COMPonent.AVAILABLE("BPU")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("BPU",-1))
width 8.
group.long 0x00++0x03
line.long 0x00 "BP_CTRL,Breakpoint Control Register"
bitfld.long 0x00 4.--7. " NUM_CODE1 ,Number of comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 1.     "              KEY  ,Key field" "No write,Write"
bitfld.long 0x00 0.     "  ENABLE ,Breakpoint unit enable bit" "Disabled,Enabled"
group.long 0x8++0x03
line.long 0x00 "B_COMP0,Breakpoint Comparator Registers 0"
bitfld.long 0x00 30.--31. " BP_MATCH  ,Happens when the COMP address is matched" "No matching,Lower halfword,Upper halfword,Both halfwords"
hexmask.long 0x00 2.--28. 2. "  COMP ,Comparison address"
bitfld.long 0x00 0.     "  ENABLE ,Compare enable for Breakpoint Comparator Register 0" "Disabled,Enabled"
group.long 0xC++0x03
line.long 0x00 "B_COMP1,Breakpoint Comparator Registers 1"
bitfld.long 0x00 30.--31. " BP_MATCH  ,Happens when the COMP address is matched" "No matching,Lower halfword,Upper halfword,Both halfwords"
hexmask.long 0x00 2.--28. 2. "  COMP ,Comparison address"
bitfld.long 0x00 0.     "  ENABLE ,Compare enable for Breakpoint Comparator Register 1" "Disabled,Enabled"
group.long 0x10++0x03
line.long 0x00 "B_COMP2,Breakpoint Comparator Registers 2"
bitfld.long 0x00 30.--31. " BP_MATCH  ,Happens when the COMP address is matched" "No matching,Lower halfword,Upper halfword,Both halfwords"
hexmask.long 0x00 2.--28. 2. "  COMP ,Comparison address"
bitfld.long 0x00 0.     "  ENABLE ,Compare enable for Breakpoint Comparator Register 2" "Disabled,Enabled"
group.long 0x14++0x03
line.long 0x00 "B_COMP3,Breakpoint Comparator Registers 3"
bitfld.long 0x00 30.--31. " BP_MATCH  ,Happens when the COMP address is matched" "No matching,Lower halfword,Upper halfword,Both halfwords"
hexmask.long 0x00 2.--28. 2. "  COMP ,Comparison address"
bitfld.long 0x00 0.     "  ENABLE ,Compare enable for Breakpoint Comparator Register 3" "Disabled,Enabled"
else
newline
textline "BPU component base address not specified"
newline
endif
tree.end
tree "Data Watchpoint and Trace Unit (DWT)"
sif COMPonent.AVAILABLE("DWT")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))
width 14.
rgroup.long 0x00++0x03
line.long 0x00 "DW_CTRL,DW Control Register "
bitfld.long 0x00 28.--31. " NUM_CODE1 ,Number of comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x1c++0x03
line.long 0x00 "DW_PCSR,DW Program Counter Sample Register"
hexmask.long 0x00 0.--31. 1. " EIASAMPLE ,Execution instruction address sample or 0xFFFFFFFF"
group.long 0x20++0x0b
line.long 0x00 "DW_COMP0,DW Comparator Register 0"
hexmask.long 0x00 0.--31. 1. " COMP1     ,Compare against PC or the data address"
line.long 0x04 "DW_MASK0,DW Mask Register 0"
hexmask.long.byte 0x04 0.--4. 1. " MASK      ,Mask on data address when matching against COMP"
line.long 0x08 "DW_FUNCTION0,DW Function Register 0"
bitfld.long 0x08 24. " MATCHED   ,Comparator match" "No match,Match"
bitfld.long 0x08 0.--3. "  FUNCTION , Settings for DW Function Registers" "Disabled,Reserved,Reserved,Reserved,On PC match,Read address,Write address,R/W address,?..."
group.long 0x30++0x0b
line.long 0x00 "DW_COMP1,DW Comparator Register 1"
hexmask.long 0x00 0.--31. 1. " COMP      ,Compare against PC or the data address"
line.long 0x04 "DW_MASK1,DW Mask Register 1 "
hexmask.long.byte 0x04 0.--4. 1. " MASK      ,Mask on data address when matching against COMP"
line.long 0x08 "DW_FUNCTION1,DW Function Register 1"
bitfld.long 0x08 24. " MATCHED   ,Comparator match" "No match,Match"
bitfld.long 0x08 0.--3. "  FUNCTION , Settings for DW Function Registers" "Disabled,Reserved,Reserved,Reserved,On PC match,Read address,Write address,R/W address,?..."
else
newline
textline "DWT component base address not specified"
newline
endif
tree.end
tree.end
AUTOINDENT.POP
tree.end
tree "ADC (Analog Digital Converter)"
base ad:0x0
tree "ADC1 (10-bit Analog Digital Converter)"
base ad:0x40004000
group.long 0x48++0x3
line.long 0x0 "CAL_CH0_1,Calibration for channel 0 and 1 register"
hexmask.long.byte 0x0 24.--31. 1. "CALGAIN_CH1,Gain calibration for channel 1"
newline
hexmask.long.byte 0x0 16.--20. 1. "CALOFFS_CH1,Offset calibration for channel 1"
newline
hexmask.long.byte 0x0 8.--15. 1. "CALGAIN_CH0,Gain calibration for channel 0"
newline
hexmask.long.byte 0x0 0.--4. 1. "CALOFFS_CH0,Offset calibration for channel 0"
group.long 0x5C++0x3
line.long 0x0 "CAL_CH10_11,Calibration for channel 10 and 11 register"
hexmask.long.byte 0x0 24.--31. 1. "CALGAIN_CH11,Gain calibration for channel 11"
newline
hexmask.long.byte 0x0 16.--20. 1. "CALOFFS_CH11,Offset calibration for channel 11"
newline
hexmask.long.byte 0x0 8.--15. 1. "CALGAIN_CH10,Gain calibration for channel 10"
newline
hexmask.long.byte 0x0 0.--4. 1. "CALOFFS_CH10,Offset calibration for channel 10"
group.long 0x4C++0xF
line.long 0x0 "CAL_CH2_3,Calibration for channel 2 and 3 register"
hexmask.long.byte 0x0 24.--31. 1. "CALGAIN_CH3,Gain calibration for channel 3"
newline
hexmask.long.byte 0x0 16.--20. 1. "CALOFFS_CH3,Offset calibration for channel 3"
newline
hexmask.long.byte 0x0 8.--15. 1. "CALGAIN_CH2,Gain calibration for channel 2"
newline
hexmask.long.byte 0x0 0.--4. 1. "CALOFFS_CH2,Offset calibration for channel 2"
line.long 0x4 "CAL_CH4_5,Calibration for channel 4 and 5 register"
hexmask.long.byte 0x4 24.--31. 1. "CALGAIN_CH5,Gain calibration for channel 5"
newline
hexmask.long.byte 0x4 16.--20. 1. "CALOFFS_CH5,Offset calibration for channel 5"
newline
hexmask.long.byte 0x4 8.--15. 1. "CALGAIN_CH4,Gain calibration for channel 4"
newline
hexmask.long.byte 0x4 0.--4. 1. "CALOFFS_CH4,Offset calibration for channel 4"
line.long 0x8 "CAL_CH6_7,Calibration for channel 6 and 7 register"
hexmask.long.byte 0x8 24.--31. 1. "CALGAIN_CH7,Gain calibration for channel 7"
newline
hexmask.long.byte 0x8 16.--20. 1. "CALOFFS_CH7,Offset calibration for channel 7"
newline
hexmask.long.byte 0x8 8.--15. 1. "CALGAIN_CH6,Gain calibration for channel 6"
newline
hexmask.long.byte 0x8 0.--4. 1. "CALOFFS_CH6,Offset calibration for channel 6"
line.long 0xC "CAL_CH8_9,Calibration for channel 8 and 9 register"
hexmask.long.byte 0xC 24.--31. 1. "CALGAIN_CH9,Gain calibration for channel 9"
newline
hexmask.long.byte 0xC 16.--20. 1. "CALOFFS_CH9,Offset calibration for channel 9"
newline
hexmask.long.byte 0xC 8.--15. 1. "CALGAIN_CH8,Gain calibration for channel 8"
newline
hexmask.long.byte 0xC 0.--4. 1. "CALOFFS_CH8,Offset calibration for channel 8"
group.long 0x8++0x7
line.long 0x0 "CHx_EIM,Channel setting bits for exceptional interrupt measurement register"
bitfld.long 0x0 16.--18. "ADC1_EIM_TRIG_SEL,Trigger selection for exceptional interrupt measurement (EIM)" "0: None,1: COUT63,2: GPT12_T6OUT,3: GPT12_T3OUT,4: t2_adc_trigger,5: t21_adc_trigger,?,?"
newline
bitfld.long 0x0 11. "EIM_EN,Exceptional interrupt measurement (EIM) Trigger Event enable" "0: Start of EIM disabled,1: Start of EIM enabled"
newline
bitfld.long 0x0 8.--10. "EIM_REP,Repeat count for exceptional interrupt measurement (EIM)" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 64 measurements,7: 128 measurements"
newline
hexmask.long.byte 0x0 0.--3. 1. "EIM_CHx,Channel set for exceptional interrupt measurement (EIM)"
line.long 0x4 "CHx_ESM,Channel setting bits for exceptional sequence measurement register"
bitfld.long 0x4 31. "ESM_STS,Exceptional sequence measurement is finished" "0: Exceptional Sequence Measurement not done,1: Exceptional Sequence Measurement done"
newline
bitfld.long 0x4 30. "ESM_EN,Enable for Exceptional Sequence Measurement Trigger Event" "0: Start of ESM disabled,1: Start of ESM enabled"
newline
bitfld.long 0x4 16.--18. "ADC1_ESM_TRIG_SEL,Trigger selection for exceptional interrupt measurement (ESM)" "0: None,1: COUT63,2: GPT12_T6OUT,3: GPT12_T3OUT,4: t2_adc_trigger,5: t21_adc_trigger,?,?"
newline
hexmask.long.word 0x4 0.--11. 1. "ESM_0,Channel sequence for exceptional sequence measurement (ESM)"
group.long 0xD8++0x3
line.long 0x0 "CNT0_3_LOWER,Lower counter trigger level channel 0-3 register"
bitfld.long 0x0 27.--28. "HYST_LO_CH3,Channel 3 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 24.--26. "CNT_LO_CH3,Lower timer trigger threshold channel 3" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_LO_CH2,Channel 2 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 16.--18. "CNT_LO_CH2,Lower timer trigger threshold channel 2" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_LO_CH1,Channel 1 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 8.--10. "CNT_LO_CH1,Lower timer trigger threshold channel 1" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_LO_CH0,Channel 0 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 0.--2. "CNT_LO_CH0,Lower timer trigger threshold channel 0" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0xE8++0x3
line.long 0x0 "CNT0_3_UPPER,Upper counter trigger level channel 0-3 register"
bitfld.long 0x0 27.--28. "HYST_UP_CH3,Channel 3 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 24.--26. "CNT_UP_CH3,Upper timer trigger threshold channel 3" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_UP_CH2,Channel 2 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 16.--18. "CNT_UP_CH2,Upper timer trigger threshold channel 2" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_UP_CH1,Channel 1 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 8.--10. "CNT_UP_CH1,Upper timer trigger threshold channel 1" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_UP_CH0,Channel 0 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 0.--2. "CNT_UP_CH0,Upper timer trigger threshold channel 0" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0xDC++0x3
line.long 0x0 "CNT4_7_LOWER,Lower counter trigger level channel 4-7 register"
bitfld.long 0x0 27.--28. "HYST_LO_CH7,Channel 7 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 24.--26. "CNT_LO_CH7,Lower timer trigger threshold channel 7" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_LO_CH6,Channel 6 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 16.--18. "CNT_LO_CH6,Lower timer trigger threshold channel 6" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_LO_CH5,Channel 5 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 8.--10. "CNT_LO_CH5,Lower timer trigger threshold channel 5" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_LO_CH4,Channel 4 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 0.--2. "CNT_LO_CH4,Lower timer trigger threshold channel 4" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0xEC++0x3
line.long 0x0 "CNT4_7_UPPER,Upper counter trigger level channel 4-7 register"
bitfld.long 0x0 27.--28. "HYST_UP_CH7,Channel 7 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 24.--26. "CNT_UP_CH7,Upper timer trigger threshold channel 7" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_UP_CH6,Channel 6 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 16.--18. "CNT_UP_CH6,Upper timer trigger threshold channel 6" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_UP_CH5,Channel 5 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 8.--10. "CNT_UP_CH5,Upper timer trigger threshold channel 5" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_UP_CH4,Channel 4 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 0.--2. "CNT_UP_CH4,Upper timer trigger threshold channel 4" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0xE0++0x3
line.long 0x0 "CNT8_11_LOWER,Lower counter trigger level channel 8-11 register"
bitfld.long 0x0 27.--28. "HYST_LO_CH11,Channel 11 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 24.--26. "CNT_LO_CH11,Lower timer trigger threshold channel 11" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_LO_CH10,Channel 10 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 16.--18. "CNT_LO_CH10,Lower timer trigger threshold channel 10" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_LO_CH9,Channel 9 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 8.--10. "CNT_LO_CH9,Lower timer trigger threshold channel 9" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_LO_CH8,Channel 8 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 0.--2. "CNT_LO_CH8,Lower timer trigger threshold channel 8" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0xF0++0x3
line.long 0x0 "CNT8_11_UPPER,Upper counter trigger level channel 8-11 register"
bitfld.long 0x0 27.--28. "HYST_UP_CH11,Channel 11 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 24.--26. "CNT_UP_CH11,Upper timer trigger threshold channel 11" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_UP_CH10,Channel 10 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 16.--18. "CNT_UP_CH10,Upper timer trigger threshold channel 10" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_UP_CH9,Channel 9 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 8.--10. "CNT_UP_CH9,Upper timer trigger threshold channel 9" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_UP_CH8,Channel 8 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 0.--2. "CNT_UP_CH8,Upper timer trigger threshold channel 8" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0x0++0x3
line.long 0x0 "CTRL_STS,ADC1 control and status register"
bitfld.long 0x0 18. "STRTUP_DIS,DPP1 startup disable" "0: DPP1 start-up enabled,1: DPP1 start-up disable"
newline
hexmask.long.byte 0x0 8.--11. 1. "SW_CH_SEL,Channel for software mode"
newline
rbitfld.long 0x0 7. "EOC,ADC1 End of Conversion (software mode)" "0: Conversion still running,1: Conversion has finished"
newline
rbitfld.long 0x0 5. "CAL_SIGN,Output of comparator to steer gain/offset calibration" "0,1"
newline
rbitfld.long 0x0 4. "READY,HVADC ready bit" "0: Module in power-down or in init phase,1: Set automatically 5 ADC clock cycles after.."
newline
bitfld.long 0x0 2. "SOS,ADC1 Start of sampling/conversion (software mode)" "0: No conversion is started,1: Conversion is started"
newline
bitfld.long 0x0 0. "PD_N,ADC1 Power-down signal" "0: ADC1 is powered down,1: ADC1 is switched on"
group.long 0x14++0x7
line.long 0x0 "CTRL2,Measurement unit 1 control 2 register"
hexmask.long.word 0x0 0.--11. 1. "CAL_EN,Calibration enable for channels 0 to 11"
line.long 0x4 "CTRL3,Measurement unit 1 control 3 register"
hexmask.long.byte 0x4 16.--19. 1. "SAMPLE_TIME_LVCH,Sample time of ADC1"
newline
hexmask.long.byte 0x4 8.--11. 1. "SAMPLE_TIME_HVCH,Sample time of ADC1"
newline
rbitfld.long 0x4 7. "MCM_RDY,Ready signal for MCM (Measurement core module) after power on or reset" "0: Measurement core module in start-up phase,1: Measurement core module start-up phase finished"
newline
rbitfld.long 0x4 6. "EoC_FAIL,Fail of ADC end of conversion signal" "0: End of conversion signal was sent properly by ADC,1: End of conversion signal was not sent properly.."
newline
bitfld.long 0x4 4. "EoC_FAIL_CLR,Fail of ADC end of conversion signal clear" "0: No clear of EoC_FAIL flag,1: Clear of EoC_FAIL flag"
newline
bitfld.long 0x4 1. "SW_MODE,Software mode enable" "0: Sequencer running,1: Sequencer stopped"
newline
bitfld.long 0x4 0. "MCM_PD_N,Power-down signal for MCM" "0: Measurement core module disabled,1: Measurement core module enabled"
group.long 0x38++0x3
line.long 0x0 "CTRL4,Measurement unit 1 control 4 register"
hexmask.long.byte 0x0 0.--3. 1. "MAX_CALTIME,Maximum ADC calibration time"
group.long 0x1C++0x3
line.long 0x0 "CTRL5,Measurement unit 1 control 5 register"
hexmask.long.word 0x0 0.--11. 1. "FILT_OUT_SEL_11_0,Output filter selection for channels 0 to 11"
group.long 0xE4++0x3
line.long 0x0 "DCHCNT1_4_LOWER,Lower counter trigger level differential channel 1-4 register"
bitfld.long 0x0 27.--28. "HYST_LO_DCH4,Differential Channel 4 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 24.--26. "CNT_LO_DCH4,Lower timer trigger threshold differential channel 4" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_LO_DCH3,Differential Channel 3 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 16.--18. "CNT_LO_DCH3,Lower timer trigger threshold differential channel 3" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_LO_DCH2,Differential Channel 2 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 8.--10. "CNT_LO_DCH2,Lower timer trigger threshold differential channel 2" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_LO_DCH1,Differential Channel 1 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 0.--2. "CNT_LO_DCH1,Lower timer trigger threshold differential channel 1" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0xF4++0x3
line.long 0x0 "DCHCNT1_4_UPPER,Upper counter trigger level differential channel 1-4 register"
bitfld.long 0x0 27.--28. "HYST_UP_DCH4,Differential channel 4 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 24.--26. "CNT_UP_DCH4,Upper timer trigger threshold differential channel 4" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 15 measurements,5: 15 measurements,6: 15 measurements,7: 15 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_UP_DCH3,Differential channel 3 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 16.--18. "CNT_UP_DCH3,Upper timer trigger threshold differential channel 3" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 15 measurements,5: 15 measurements,6: 15 measurements,7: 15 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_UP_DCH2,Differential channel 2 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 8.--10. "CNT_UP_DCH2,Upper timer trigger threshold differential channel 2" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 15 measurements,5: 15 measurements,6: 15 measurements,7: 15 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_UP_DCH1,Differential channel 1 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
newline
bitfld.long 0x0 0.--2. "CNT_UP_DCH1,Upper timer trigger threshold differential channel 1" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 15 measurements,5: 15 measurements,6: 15 measurements,7: 15 measurements"
group.long 0xC4++0x3
line.long 0x0 "DCHTH1_4_LOWER,Lower comparator trigger level differential channel 1-4 register"
hexmask.long.byte 0x0 24.--31. 1. "DCH4_LOW,Differential channel 4 lower trigger level"
newline
hexmask.long.byte 0x0 16.--23. 1. "DCH3_LOW,Differential channel 3 lower trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "DCH2_LOW,Differential channel 2 lower trigger level"
newline
hexmask.long.byte 0x0 0.--7. 1. "DCH1_LOW,Differential channel 1 lower trigger level"
group.long 0xD4++0x3
line.long 0x0 "DCHTH1_4_UPPER,Upper comparator trigger level differential channel 1-4 register"
hexmask.long.byte 0x0 24.--31. 1. "DCH4_UP,Differential channel 4 upper trigger level"
newline
hexmask.long.byte 0x0 16.--23. 1. "DCH3_UP,Differential channel 3 upper trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "DCH2_UP,Differential channel 2 upper trigger level"
newline
hexmask.long.byte 0x0 0.--7. 1. "DCH1_UP,Differential channel 1 upper trigger level"
group.long 0xA0++0xF
line.long 0x0 "DIFFCH_OUT1,ADC1 differential channel output 1 register"
rbitfld.long 0x0 18. "DOF1,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x0 17. "DVF1,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x0 16. "DWFR1,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x0 0.--11. 1. "DCH1,ADC differential output value 1"
line.long 0x4 "DIFFCH_OUT2,ADC1 differential channel output 2 register"
rbitfld.long 0x4 18. "DOF2,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x4 17. "DVF2,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x4 16. "DWFR2,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x4 0.--11. 1. "DCH2,ADC differential output value 2"
line.long 0x8 "DIFFCH_OUT3,ADC1 differential channel output 3 register"
rbitfld.long 0x8 18. "DOF3,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x8 17. "DVF3,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x8 16. "DWFR3,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x8 0.--11. 1. "DCH3,ADC differential output value 3"
line.long 0xC "DIFFCH_OUT4,ADC1 differential channel output 4 register"
rbitfld.long 0xC 18. "DOF4,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0xC 17. "DVF4,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0xC 16. "DWFR4,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0xC 0.--11. 1. "DCH4,ADC differential output value 4"
group.long 0xFC++0x3
line.long 0x0 "DUIN_SEL,Measurement unit 1 - Differential unit input selection register"
rbitfld.long 0x0 28. "DU4RES_NEG,Differential unit 4 result negative" "0: Differential unit 4 result positive after..,1: Differential unit 4 result negative after.."
newline
bitfld.long 0x0 24. "DU4_EN,Differential unit 4 enable" "0: Differential unit 4 is disabled,1: Differential unit 4 is enabled"
newline
rbitfld.long 0x0 20. "DU3RES_NEG,Differential unit 3 result negative" "0: Differential unit 3 result positive after..,1: Differential unit 3 result negative after.."
newline
bitfld.long 0x0 16. "DU3_EN,Differential unit 3 enable" "0: Differential unit 3 is disabled,1: Differential unit 3 is enabled"
newline
rbitfld.long 0x0 12. "DU2RES_NEG,Differential unit 2 result negative" "0: Differential unit 2 result positive after..,1: Differential unit 2 result negative after.."
newline
bitfld.long 0x0 8. "DU2_EN,Differential unit 2 enable" "0: Differential unit 2 is disabled,1: Differential unit 2 is enabled"
newline
rbitfld.long 0x0 4. "DU1RES_NEG,Differential unit 1 result negative" "0: Differential unit 1 result positive after..,1: Differential unit 1 result negative after.."
newline
bitfld.long 0x0 0. "DU1_EN,Differential unit 1 enable" "0: Differential unit 1 is disabled,1: Differential unit 1 is enabled"
group.long 0xB4++0x3
line.long 0x0 "FILT_LO_CTRL,Lower Threshold filter enable"
bitfld.long 0x0 11. "FL_CH11_EN,Lower threshold IIR filter enable channel 11" "0: Disable,1: Enable"
newline
bitfld.long 0x0 10. "FL_CH10_EN,Lower threshold IIR filter enable channel 10" "0: Disable,1: Enable"
newline
bitfld.long 0x0 9. "FL_CH9_EN,Lower threshold IIR filter enable channel 9" "0: Disable,1: Enable"
newline
bitfld.long 0x0 8. "FL_CH8_EN,Lower threshold IIR filter enable channel 8" "0: Disable,1: Enable"
newline
bitfld.long 0x0 7. "FL_CH7_EN,Lower threshold IIR filter enable channel 7" "0: Disable,1: Enable"
newline
bitfld.long 0x0 6. "FL_CH6_EN,Lower threshold IIR filter enable channel 6" "0: Disable,1: Enable"
newline
bitfld.long 0x0 5. "FL_CH5_EN,Lower threshold IIR filter enable channel 5" "0: Disable,1: Enable"
newline
bitfld.long 0x0 4. "FL_CH4_EN,Lower threshold IIR filter enable channel 4" "0: Disable,1: Enable"
newline
bitfld.long 0x0 3. "FL_CH3_EN,Lower threshold IIR filter enable channel 3" "0: Disable,1: Enable"
newline
bitfld.long 0x0 2. "FL_CH2_EN,Lower threshold IIR filter enable channel 2" "0: Disable,1: Enable"
newline
bitfld.long 0x0 1. "FL_CH1_EN,Lower threshold IIR filter enable channel 1" "0: Disable,1: Enable"
newline
bitfld.long 0x0 0. "FL_CH0_EN,Lower threshold IIR filter enable channel 0" "0: Disable,1: Enable"
group.long 0x70++0x7
line.long 0x0 "FILT_OUT0,ADC1 or filter output channel 0 register"
rbitfld.long 0x0 18. "OF0,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x0 17. "VF0,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x0 16. "WFR0,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x0 0.--11. 1. "FILT_OUT_CH0,ADC or filter output value channel 0"
line.long 0x4 "FILT_OUT1,ADC1 or filter output channel 1 register"
rbitfld.long 0x4 18. "OF1,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x4 17. "VF1,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x4 16. "WFR1,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x4 0.--11. 1. "FILT_OUT_CH1,ADC or filter output value channel 1"
group.long 0x98++0x7
line.long 0x0 "FILT_OUT10,ADC1 or filter output channel 10 register"
rbitfld.long 0x0 18. "OF10,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x0 17. "VF10,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x0 16. "WFR10,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x0 0.--11. 1. "FILT_OUT_CH10,ADC or filter output value channel 10"
line.long 0x4 "FILT_OUT11,ADC1 or filter output channel 11 register"
rbitfld.long 0x4 18. "OF11,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x4 17. "VF11,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x4 16. "WFR11,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x4 0.--11. 1. "FILT_OUT_CH11,ADC or filter output value channel 11"
group.long 0x110++0x3
line.long 0x0 "FILT_OUT12,ADC1 or filter output channel 12 register"
rbitfld.long 0x0 18. "OF12,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x0 17. "VF12,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x0 16. "WFR12,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x0 0.--11. 1. "FILT_OUT_CH12,ADC or filter output value channel 12"
group.long 0x78++0x1F
line.long 0x0 "FILT_OUT2,ADC1 or filter output channel 2 register"
rbitfld.long 0x0 18. "OF2,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x0 17. "VF2,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x0 16. "WFR2,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x0 0.--11. 1. "FILT_OUT_CH2,ADC or filter output value channel 2"
line.long 0x4 "FILT_OUT3,ADC1 or filter output channel 3 register"
rbitfld.long 0x4 18. "OF3,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x4 17. "VF3,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x4 16. "WFR3,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x4 0.--11. 1. "FILT_OUT_CH3,ADC or filter output value channel 3"
line.long 0x8 "FILT_OUT4,ADC1 or filter output channel 4 register"
rbitfld.long 0x8 18. "OF4,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x8 17. "VF4,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x8 16. "WFR4,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x8 0.--11. 1. "FILT_OUT_CH4,ADC or filter output value channel 4"
line.long 0xC "FILT_OUT5,ADC1 or filter output channel 5 register"
rbitfld.long 0xC 18. "OF5,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0xC 17. "VF5,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0xC 16. "WFR5,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0xC 0.--11. 1. "FILT_OUT_CH5,ADC or filter output value channel 5"
line.long 0x10 "FILT_OUT6,ADC1 or filter output channel 6 register"
rbitfld.long 0x10 18. "OF6,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x10 17. "VF6,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x10 16. "WFR6,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x10 0.--11. 1. "FILT_OUT_CH6,ADC or filter output value channel 6"
line.long 0x14 "FILT_OUT7,ADC1 or filter output channel 7 register"
rbitfld.long 0x14 18. "OF7,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x14 17. "VF7,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x14 16. "WFR7,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x14 0.--11. 1. "FILT_OUT_CH7,ADC or filter output value channel 7"
line.long 0x18 "FILT_OUT8,ADC1 or filter output channel 8 register"
rbitfld.long 0x18 18. "OF8,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x18 17. "VF8,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x18 16. "WFR8,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x18 0.--11. 1. "FILT_OUT_CH8,ADC or filter output value channel 8"
line.long 0x1C "FILT_OUT9,ADC1 or filter output channel 9 register"
rbitfld.long 0x1C 18. "OF9,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x1C 17. "VF9,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x1C 16. "WFR9,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x1C 0.--11. 1. "FILT_OUT_CH9,ADC or filter output value channel 9"
group.long 0x120++0x3
line.long 0x0 "FILT_OUTEIM,ADC1 or filter output of EIM register"
rbitfld.long 0x0 18. "OF_EIM,Overrun flag" "0: Result register not overwritten,1: Result register overwritten"
newline
rbitfld.long 0x0 17. "VF_EIM,Valid flag" "0: No new valid data available,1: Result register contains valid data and has not.."
newline
bitfld.long 0x0 16. "WFR_EIM,Wait for read mode" "0: Overwrite mode,1: Wait for read mode enabled"
newline
hexmask.long.word 0x0 0.--11. 1. "FILT_OUT_EIM,ADC or filter output value for last EIM measurement"
group.long 0xB0++0x3
line.long 0x0 "FILT_UP_CTRL,Upper threshold filter enable"
bitfld.long 0x0 11. "FU_CH11_EN,Upper threshold IIR filter enable channel 11" "0: Disable,1: Enable"
newline
bitfld.long 0x0 10. "FU_CH10_EN,Upper threshold IIR filter enable channel 10" "0: Disable,1: Enable"
newline
bitfld.long 0x0 9. "FU_CH9_EN,Upper threshold IIR filter enable channel 9" "0: Disable,1: Enable"
newline
bitfld.long 0x0 8. "FU_CH8_EN,Upper threshold IIR filter enable channel 8" "0: Disable,1: Enable"
newline
bitfld.long 0x0 7. "FU_CH7_EN,Upper threshold IIR filter enable channel 7" "0: Disable,1: Enable"
newline
bitfld.long 0x0 6. "FU_CH6_EN,Upper threshold IIR filter enable channel 6" "0: Disable,1: Enable"
newline
bitfld.long 0x0 5. "FU_CH5_EN,Upper threshold IIR filter enable channel 5" "0: Disable,1: Enable"
newline
bitfld.long 0x0 4. "FU_CH4_EN,Upper threshold IIR filter enable channel 4" "0: Disable,1: Enable"
newline
bitfld.long 0x0 3. "FU_CH3_EN,Upper threshold IIR filter enable channel 3" "0: Disable,1: Enable"
newline
bitfld.long 0x0 2. "FU_CH2_EN,Upper threshold IIR filter enable channel 2" "0: Disable,1: Enable"
newline
bitfld.long 0x0 1. "FU_CH1_EN,Upper threshold IIR filter enable channel 1" "0: Disable,1: Enable"
newline
bitfld.long 0x0 0. "FU_CH0_EN,Upper threshold IIR filter enable channel 0" "0: Disable,1: Enable"
group.long 0x60++0x3
line.long 0x0 "FILTCOEFF0_11,Filter coefficients measurement unit channel 0-11 register"
bitfld.long 0x0 22.--23. "CH11,Filter coefficients ADC channel 11" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 20.--21. "CH10,Filter coefficients ADC channel 10" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 18.--19. "CH9,Filter coefficients ADC channel 9" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 16.--17. "CH8,Filter coefficients ADC channel 8" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 14.--15. "CH7,Filter coefficients ADC channel 7" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 12.--13. "CH6,Filter Coefficients ADC channel 6" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 10.--11. "CH5,Filter coefficients ADC channel 5" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 8.--9. "CH4,Filter coefficients ADC channel 4" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 6.--7. "CH3,Filter coefficients ADC channel 3" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 4.--5. "CH2,Filter coefficients ADC channel 2" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 2.--3. "CH1,Filter coefficients ADC channel 1" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 0.--1. "CH0,Filter coefficients ADC channel 0" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
wgroup.long 0x6C++0x3
line.long 0x0 "IRQCLR_1,ADC1 interrupt status clear 1 register"
bitfld.long 0x0 31. "DU4UP_ISC,Differential unit 4 lower interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 30. "DU4LO_ISC,Differential unit 4 lower interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 29. "DU3UP_ISC,Differential unit 3 lower interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 28. "DU3LO_ISC,Differential unit 3 lower interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 27. "DU2UP_ISC,Differential unit 2 lower interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 26. "DU2LO_ISC,Differential unit 2 lower interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 25. "DU1UP_ISC,Differential unit 1 lower interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 24. "DU1LO_ISC,Differential unit 1 lower interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 17. "ESM_ISC,Exceptional sequence measurement (ESM) status clear" "0: No ESM has cleared,1: ESM cleared"
newline
bitfld.long 0x0 16. "EIM_ISC,Exceptional interrupt measurement (EIM) status clear" "0: No EIM cleared,1: EIM cleared"
newline
bitfld.long 0x0 12. "P2_0_ISC,ADC1 Port 2.0 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 11. "P2_7_ISC,ADC1 Port 2.7 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 10. "P2_6_ISC,ADC1 Port 2.6 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 9. "P2_3_ISC,ADC1 Port 2.3 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 8. "P2_2_ISC,ADC1 Port 2.2 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 7. "P2_1_ISC,ADC1 Port 2.1 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 6. "MON5_ISC,ADC1 MON 5 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 5. "MON4_ISC,ADC1 MON 4 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 4. "MON3_ISC,ADC1 MON 3 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 3. "MON2_ISC,ADC1 MON 2 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 2. "MON1_ISC,ADC1 MON 1 interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 1. "VS_ISC,ADC1 VS interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 0. "VBATSEN_ISC,ADC1 VBAT_SENSE interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
wgroup.long 0x108++0x3
line.long 0x0 "IRQCLR_2,ADC1 interrupt status clear 2 register"
bitfld.long 0x0 27. "P2_7_UP_ISC,ADC1 port 2.7 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 26. "P2_6_UP_ISC,ADC1 port 2.6 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 25. "P2_3_UP_ISC,ADC1 port 2.3 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 24. "P2_2_UP_ISC,ADC1 port 2.2 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 23. "P2_1_UP_ISC,ADC1 port 2.1 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 22. "MON5_UP_ISC,ADC1 MON 5 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 21. "MON4_UP_ISC,ADC1 MON 4 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 20. "MON3_UP_ISC,ADC1 MON 3 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 19. "MON2_UP_ISC,ADC1 MON 2 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 18. "MON1_UP_ISC,ADC1 MON 1 upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 17. "VS_UP_ISC,ADC1 VS upper threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 11. "P2_7_LO_ISC,ADC1 port 2.7 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 10. "P2_6_LO_ISC,ADC1 port 2.6 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 9. "P2_3_LO_ISC,ADC1 port 2.3 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 8. "P2_2_LO_ISC,ADC1 port 2.2 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 7. "P2_1_LO_ISC,ADC1 port 2.1 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 6. "MON5_LO_ISC,ADC1 MON 5 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 5. "MON4_LO_ISC,ADC1 MON 4 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 4. "MON3_LO_ISC,ADC1 MON 3 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 3. "MON2_LO_ISC,ADC1 MON 2 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 2. "MON1_LO_ISC,ADC1 MON 1 lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
newline
bitfld.long 0x0 1. "VS_LO_ISC,ADC1 VS lower threshold interrupt status clear" "0: Interrupt status is not cleared,1: Interrupt status is cleared"
group.long 0x68++0x3
line.long 0x0 "IRQEN_1,ADC1 interrupt enable 1 register"
bitfld.long 0x0 31. "DU4UP_IEN,Differential unit 4 upper interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 30. "DU4LO_IEN,Differential unit 4 lower interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 29. "DU3UP_IEN,Differential unit 3 upper interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 28. "DU3LO_IEN,Differential unit 3 lower interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 27. "DU2UP_IEN,Differential unit 2 upper interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 26. "DU2LO_IEN,Differential unit 2 lower interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 25. "DU1UP_IEN,Differential unit 1 upper interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 24. "DU1LO_IEN,Differential unit 1 lower interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 17. "ESM_IEN,Exceptional sequence measurement (ESM) interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 16. "EIM_IEN,Exceptional interrupt measurement (EIM) interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 12. "P2_0_IEN,ADC1 Port 2.0 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 11. "P2_7_IEN,ADC1 Port 2.7 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 10. "P2_6_IEN,ADC1 Port 2.6 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 9. "P2_3_IEN,ADC1 Port 2.3 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 8. "P2_2_IEN,ADC1 Port 2.2 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 7. "P2_1_IEN,ADC1 Port 2.1 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 6. "MON5_IEN,ADC1 MON 5 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 5. "MON4_IEN,ADC1 MON 4 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 4. "MON3_IEN,ADC1 MON 3 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 3. "MON2_IEN,ADC1 MON 2 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 2. "MON1_IEN,ADC1 MON 1 interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 1. "VS_IEN,ADC1 VS interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 0. "VBATSEN_IEN,ADC1 VBAT_SENSE interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
group.long 0x10C++0x3
line.long 0x0 "IRQEN_2,ADC1 interrupt enable 2 register"
bitfld.long 0x0 27. "P2_7_UP_IEN,ADC1 port 2.7 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 26. "P2_6_UP_IEN,ADC1 port 2.6 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 25. "P2_3_UP_IEN,ADC1 port 2.3 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 24. "P2_2_UP_IEN,ADC1 port 2.2 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 23. "P2_1_UP_IEN,ADC1 port 2.1 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 22. "MON5_UP_IEN,ADC1 MON 5 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 21. "MON4_UP_IEN,ADC1 MON 4 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 20. "MON3_UP_IEN,ADC1 MON 3 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 19. "MON2_UP_IEN,ADC1 MON 2 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 18. "MON1_UP_IEN,ADC1 MON 1 upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 17. "VS_UP_IEN,ADC1 VS upper threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 11. "P2_7_LO_IEN,ADC1 port 2.7 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 10. "P2_6_LO_IEN,ADC1 port 2.6 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 9. "P2_3_LO_IEN,ADC1 port 2.3 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 8. "P2_2_LO_IEN,ADC1 port 2.2 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 7. "P2_1_LO_IEN,ADC1 port 2.1 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 6. "MON5_LO_IEN,ADC1 MON 5 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 5. "MON4_LO_IEN,ADC1 MON 4 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 4. "MON3_LO_IEN,ADC1 MON 3 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 3. "MON2_LO_IEN,ADC1 MON 2 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 2. "MON1_LO_IEN,ADC1 MON 1 lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 1. "VS_LO_IEN,ADC1 VS lower threshold interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
group.long 0x64++0x3
line.long 0x0 "IRQS_1,ADC1 interrupt status 1 register"
bitfld.long 0x0 31. "DU4UP_IS,ADC1 differential unit 4 (DU4) upper channel interrupt dtatus" "0: No DU upper channel interrupt has occurred,1: DU upper channel interrupt has occurred"
newline
bitfld.long 0x0 30. "DU4LO_IS,ADC1 differential unit 4 (DU4) lower channel interrupt status" "0: No DU lower channel interrupt has occurred,1: DU lower channel interrupt has occurred"
newline
bitfld.long 0x0 29. "DU3UP_IS,ADC1 differential unit 3 (DU3) upper channel interrupt status" "0: No DU upper channel interrupt has occurred,1: DU upper channel interrupt has occurred"
newline
bitfld.long 0x0 28. "DU3LO_IS,ADC1 differential unit 3 (DU3) lower Channel interrupt status" "0: No DU lower channel interrupt has occurred,1: DU lower channel interrupt has occurred"
newline
bitfld.long 0x0 27. "DU2UP_IS,ADC1 differential unit 2 (DU2) upper channel interrupt status" "0: No DU upper channel interrupt has occurred,1: DU upper channel interrupt has occurred"
newline
bitfld.long 0x0 26. "DU2LO_IS,ADC1 differential unit 2 (DU2) lower channel interrupt status" "0: No DU lower channel interrupt has occurred,1: DU lower channel interrupt has occurred"
newline
bitfld.long 0x0 25. "DU1UP_IS,ADC1 differential unit 1 (DU1) upper channel interrupt status" "0: No DU upper Channel Interrupt has occurred,1: DU upper Channel Interrupt has occurred"
newline
bitfld.long 0x0 24. "DU1LO_IS,ADC1 Differential Unit 1 (DU1) lower channel interrupt status" "0: No DU lower channel Interrupt has occurred,1: DU lower channel interrupt has occurred"
newline
bitfld.long 0x0 17. "ESM_IS,Exceptional sequence measurement (ESM) status" "0: No ESM has occurred,1: ESM occurred"
newline
bitfld.long 0x0 16. "EIM_IS,Exceptional interrupt measurement (EIM) status" "0: No EIM occurred,1: EIM occurred"
newline
bitfld.long 0x0 12. "P2_0_IS,ADC1 channel 12 interrupt status" "0: No channel 12 interrupt has occurred,1: Channel 12 interrupt has occurred"
newline
bitfld.long 0x0 11. "P2_7_IS,ADC1 channel 11 interrupt status" "0: No channel 11 interrupt has occurred,1: Channel 11 interrupt has occurred"
newline
bitfld.long 0x0 10. "P2_6_IS,ADC1 channel 10 interrupt status" "0: No channel 10 interrupt has occurred,1: Channel 10 interrupt has occurred"
newline
bitfld.long 0x0 9. "P2_3_IS,ADC1 channel 9 interrupt status" "0: No channel 9 interrupt has occurred,1: Channel 9 interrupt has occurred"
newline
bitfld.long 0x0 8. "P2_2_IS,ADC1 channel 8 interrupt status" "0: No channel 8 interrupt has occurred,1: Channel 8 interrupt has occurred"
newline
bitfld.long 0x0 7. "P2_1_IS,ADC1 channel 7 interrupt status" "0: No channel 7 interrupt has occurred,1: Channel 7 interrupt has occurred"
newline
bitfld.long 0x0 6. "MON5_IS,ADC1 channel 6 interrupt status" "0: No channel 6 interrupt has occurred,1: Channel 6 interrupt has occurred"
newline
bitfld.long 0x0 5. "MON4_IS,ADC1 channel 5 interrupt status" "0: No channel 5 interrupt has occurred,1: Channel 5 interrupt has occurred"
newline
bitfld.long 0x0 4. "MON3_IS,ADC1 channel 4 interrupt status" "0: No channel 4 interrupt has occurred,1: Channel 4 interrupt has occurred"
newline
bitfld.long 0x0 3. "MON2_IS,ADC1 channel 3 interrupt status" "0: No channel 3 interrupt has occurred,1: Channel 3 interrupt has occurred"
newline
bitfld.long 0x0 2. "MON1_IS,ADC1 channel 2 interrupt status" "0: No channel 2 interrupt has occurred,1: Channel 2 interrupt has occurred"
newline
bitfld.long 0x0 1. "VS_IS,ADC1 channel 0 interrupt status" "0: No channel 0 interrupt has occurred,1: Channel 0 interrupt has occurred"
newline
bitfld.long 0x0 0. "VBATSEN_IS,ADC1 channel 1 interrupt status" "0: No channel 1 interrupt has occurred,1: Channel 1 interrupt has occurred"
group.long 0x100++0x3
line.long 0x0 "IRQS_2,ADC1 interrupt status 2 register"
bitfld.long 0x0 27. "P2_7_UP_IS,ADC1 port 2.7 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 26. "P2_6_UP_IS,ADC1 port 2.6 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 25. "P2_3_UP_IS,ADC1 port 2.3 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 24. "P2_2_UP_IS,ADC1 port 2.2 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 23. "P2_1_UP_IS,ADC1 port 2.1 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 22. "MON5_UP_IS,ADC1 MON 5 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 21. "MON4_UP_IS,ADC1 MON 4 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 20. "MON3_UP_IS,ADC1 MON 3 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 19. "MON2_UP_IS,ADC1 MON 2 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 18. "MON1_UP_IS,ADC1 MON 1 upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 17. "VS_UP_IS,ADC1 VS upper threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 11. "P2_7_LO_IS,ADC1 port 2.7 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 10. "P2_6_LO_IS,ADC1 port 2.6 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 9. "P2_3_LO_IS,ADC1 port 2.3 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 8. "P2_2_LO_IS,ADC1 port 2.2 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 7. "P2_1_LO_IS,ADC1 port 2.1 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 6. "MON5_LO_IS,ADC1 MON 5 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 5. "MON4_LO_IS,ADC1 MON 4 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 4. "MON3_LO_IS,ADC1 MON 3 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 3. "MON2_LO_IS,ADC1 MON 2 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 2. "MON1_LO_IS,ADC1 MON 1 lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
newline
bitfld.long 0x0 1. "VS_LO_IS,ADC1 VS lower threshold interrupt status" "0: No interrupt has occurred,1: Interrupt has occurred"
group.long 0x10++0x3
line.long 0x0 "MAX_TIME,Maximum time for software mode register"
hexmask.long.byte 0x0 0.--7. 1. "MAX_TIME,Maximum Time in software mode"
group.long 0xF8++0x3
line.long 0x0 "MMODE0_11,Overvoltage measurement mode of channel 0-11 register"
bitfld.long 0x0 30.--31. "MMODE_D4,Measurement mode differential channel 4" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 28.--29. "MMODE_D3,Measurement mode differential channel 3" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 26.--27. "MMODE_D2,Measurement mode differential channel 2" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 24.--25. "MMODE_D1,Measurement mode differential channel 1" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 22.--23. "MMODE_11,Measurement mode channel 11" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 20.--21. "MMODE_10,Measurement mode channel 10" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 18.--19. "MMODE_9,Measurement mode channel 9" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 16.--17. "MMODE_8,Measurement mode channel 8" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 14.--15. "MMODE_7,Measurement mode channel 7" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 12.--13. "MMODE_6,Measurement mode channel 6" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 10.--11. "MMODE_5,Measurement mode channel 5" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 8.--9. "MMODE_4,Measurement mode channel 4" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 6.--7. "MMODE_3,Measurement mode channel 3" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 4.--5. "MMODE_2,Measurement mode channel 2" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 2.--3. "MMODE_1,Measurement mode channel 1" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 0.--1. "MMODE_0,Measurement mode channel 0" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
rgroup.long 0x4++0x3
line.long 0x0 "SQ_FB,Sequencer feedback register"
hexmask.long.byte 0x0 16.--19. 1. "CHx,Current ADC1 channel"
newline
hexmask.long.byte 0x0 11.--14. 1. "SQx,Current active ADC1 sequence"
newline
bitfld.long 0x0 10. "ESM_ACTIVE,ADC1 ESM active" "0: ESM not active,1: ESM active"
newline
bitfld.long 0x0 9. "EIM_ACTIVE,ADC1 EIM active" "0: EIM not active,1: EIM active"
newline
bitfld.long 0x0 8. "SQ_STOP,ADC1 sequencer stop signal for DPP" "0: Postprocessing sequencer in running mode,1: Postprocessing sequencer stopped/software mode.."
newline
hexmask.long.byte 0x0 0.--4. 1. "SQ_FB,Current sequence that caused software mode"
group.long 0x20++0x3
line.long 0x0 "SQ0_1,Measurement unit 1 channel enable bits for cycle 0-1 register"
hexmask.long.word 0x0 16.--27. 1. "SQ1,Sequence 1 channel enable"
newline
hexmask.long.word 0x0 0.--11. 1. "SQ0,Sequence 0 channel enable"
group.long 0x34++0x3
line.long 0x0 "SQ10_11,Measurement unit 1 channel enable bits for cycle 10-11 register"
hexmask.long.word 0x0 16.--27. 1. "SQ11,Sequence 11 channel enable"
newline
hexmask.long.word 0x0 0.--11. 1. "SQ10,Sequence 10 channel enable"
group.long 0x24++0xF
line.long 0x0 "SQ2_3,Measurement unit 1 channel enable bits for cycle 2-3 register"
hexmask.long.word 0x0 16.--27. 1. "SQ3,Sequence 3 channel enable"
newline
hexmask.long.word 0x0 0.--11. 1. "SQ2,Sequence 2 channel enable"
line.long 0x4 "SQ4_5,Measurement unit 1 channel enable bits for cycle 4-5 register"
hexmask.long.word 0x4 16.--27. 1. "SQ5,Sequence 5 channel enable"
newline
hexmask.long.word 0x4 0.--11. 1. "SQ4,Sequence 4 channel enable"
line.long 0x8 "SQ6_7,Measurement unit 1 channel enable bits for cycle 6-7 register"
hexmask.long.word 0x8 16.--27. 1. "SQ7,Sequence 7 channel enable"
newline
hexmask.long.word 0x8 0.--11. 1. "SQ6,Sequence 6 channel enable"
line.long 0xC "SQ8_9,Measurement unit 1 channel enable bits for cycle 8-9 register"
hexmask.long.word 0xC 16.--27. 1. "SQ9,Sequence 9 channel enable"
newline
hexmask.long.word 0xC 0.--11. 1. "SQ8,Sequence 8 channel enable"
group.long 0x124++0x3
line.long 0x0 "STS_1,ADC1 status 1 register"
bitfld.long 0x0 31. "DU4UP_STS,ADC1 differential unit 4 (DU4) upper channel status" "0: No DU upper channel status has occurred,1: DU upper channel status has occurred"
newline
bitfld.long 0x0 30. "DU4LO_STS,ADC1 differential unit 4 (DU4) lower channel status" "0: No DU lower channel status has occurred,1: DU lower channel status has occurred"
newline
bitfld.long 0x0 29. "DU3UP_STS,ADC1 differential unit 3 (DU3) upper channel status" "0: No DU upper channel status has occurred,1: DU upper channel status has occurred"
newline
bitfld.long 0x0 28. "DU3LO_STS,ADC1 differential unit 3 (DU3) lower channel status" "0: No DU lower channel status has occurred,1: DU lower channel status has occurred"
newline
bitfld.long 0x0 27. "DU2UP_STS,ADC1 differential unit 2 (DU2) upper channel status" "0: No DU upper channel status has occurred,1: DU upper channel status has occurred"
newline
bitfld.long 0x0 26. "DU2LO_STS,ADC1 differential unit 2 (DU2) lower channel status" "0: No DU lower channel status has occurred,1: DU lower channel status has occurred"
newline
bitfld.long 0x0 25. "DU1UP_STS,ADC1 differential unit 1 (DU1) upper channel status" "0: No DU upper channel status has occurred,1: DU upper channel status has occurred"
newline
bitfld.long 0x0 24. "DU1LO_STS,ADC1 differential unit 1 (DU1) lower channel status" "0: No DU lower channel status has occurred,1: DU lower channel status has occurred"
rgroup.long 0x104++0x3
line.long 0x0 "STS_2,ADC1 status 2 register"
bitfld.long 0x0 27. "P2_7_UP_STS,ADC1 port 2.7 upper threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 26. "P2_6_UP_STS,ADC1 port 2.6 upper threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 25. "P2_3_UP_STS,ADC1 port 2.3 upper threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 24. "P2_2_UP_STS,ADC1 port 2.2 upper threshold Status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 23. "P2_1_UP_STS,ADC1 port 2.1 upper threshold Status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 22. "MON5_UP_STS,ADC1 MON 5 upper threshold Status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 21. "MON4_UP_STS,ADC1 MON 4 upper threshold Status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 20. "MON3_UP_STS,ADC1 MON 3 upper threshold Status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 19. "MON2_UP_STS,ADC1 MON 2 upper threshold Status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 18. "MON1_UP_STS,ADC1 MON 1 upper threshold Status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 17. "VS_UP_STS,ADC1 VS upper threshold Status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 11. "P2_7_LO_STS,ADC1 port 2.7 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 10. "P2_6_LO_STS,ADC1 port 2.6 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 9. "P2_3_LO_STS,ADC1 port 2.3 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 8. "P2_2_LO_STS,ADC1 port 2.2 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 7. "P2_1_LO_STS,ADC1 port 2.1 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 6. "MON5_LO_STS,ADC1 MON 5 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 5. "MON4_LO_STS,ADC1 MON 4 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 4. "MON3_LO_STS,ADC1 MON 3 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 3. "MON2_LO_STS,ADC1 MON 2 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 2. "MON1_LO_STS,ADC1 MON 1 lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
newline
bitfld.long 0x0 1. "VS_LO_STS,ADC1 VS lower threshold status" "0: Status below upper threshold,1: Upper threshold exceeded"
wgroup.long 0x128++0x3
line.long 0x0 "STSCLR_1,ADC1 status clear 1 register"
bitfld.long 0x0 31. "DU4UP_SC,ADC1 differential unit 4 (DU4) upper channel status clear" "0: No DU upper channel status has occurred,1: DU upper channel status has occurred"
newline
bitfld.long 0x0 30. "DU4LO_SC,ADC1 differential unit 4 (DU4) lower channel status clear" "0: No DU lower channel status has occurred,1: DU lower channel status has occurred"
newline
bitfld.long 0x0 29. "DU3UP_SC,ADC1 differential unit 3 (DU3) upper channel status clear" "0: No DU upper channel status has occurred,1: DU upper channel status has occurred"
newline
bitfld.long 0x0 28. "DU3LO_SC,ADC1 differential unit 3 (DU3) lower channel status clear" "0: No DU lower channel status has occurred,1: DU lower channel status has occurred"
newline
bitfld.long 0x0 27. "DU2UP_SC,ADC1 differential unit 2 (DU2) upper channel status clear" "0: No DU upper channel status has occurred,1: DU upper channel status has occurred"
newline
bitfld.long 0x0 26. "DU2LO_SC,ADC1 differential unit 2 (DU2) lower channel status clear" "0: No DU lower channel status has occurred,1: DU lower channel status has occurred"
newline
bitfld.long 0x0 25. "DU1UP_SC,ADC1 differential unit 1 (DU1) upper channel status clear" "0: No DU upper channel status has occurred,1: DU upper channel status has occurred"
newline
bitfld.long 0x0 24. "DU1LO_SC,ADC1 differential unit 1 (DU1) lower channel status clear" "0: No DU lower channel status has occurred,1: DU lower channel status has occurred"
group.long 0x40++0x3
line.long 0x0 "TH0_3_LOWER,Lower comparator trigger level channel 0-3"
hexmask.long.byte 0x0 24.--31. 1. "CH3_LOW,Channel 3 lower trigger level"
newline
hexmask.long.byte 0x0 16.--23. 1. "CH2_LOW,Channel 2 lower trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "CH1_LOW,Channel 1 lower trigger level"
newline
hexmask.long.byte 0x0 0.--7. 1. "CH0_LOW,Channel 0 lower trigger level"
group.long 0xC8++0x3
line.long 0x0 "TH0_3_UPPER,Upper comparator trigger level channel 0-3 register"
hexmask.long.byte 0x0 24.--31. 1. "CH3_UP,Channel 3 upper trigger level"
newline
hexmask.long.byte 0x0 16.--23. 1. "CH2_UP,Channel 2 upper trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "CH1_UP,Channel 1 upper trigger level"
newline
hexmask.long.byte 0x0 0.--7. 1. "CH0_UP,Channel 0 upper trigger level"
group.long 0x44++0x3
line.long 0x0 "TH4_7_LOWER,Lower comparator trigger level channel 4-7"
hexmask.long.byte 0x0 24.--31. 1. "CH7_LOW,Channel 7 lower trigger level"
newline
hexmask.long.byte 0x0 16.--23. 1. "CH6_LOW,Channel 6 lower trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "CH5_LOW,Channel 5 lower trigger level"
newline
hexmask.long.byte 0x0 0.--7. 1. "CH4_LOW,Channel 4 lower trigger level"
group.long 0xCC++0x3
line.long 0x0 "TH4_7_UPPER,Upper comparator trigger level channel 4-7 register"
hexmask.long.byte 0x0 24.--31. 1. "CH7_UP,Channel 7 upper trigger level"
newline
hexmask.long.byte 0x0 16.--23. 1. "CH6_UP,Channel 6 upper trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "CH5_UP,Channel 5 upper trigger level"
newline
hexmask.long.byte 0x0 0.--7. 1. "CH4_UP,Channel 4 upper trigger level"
group.long 0xC0++0x3
line.long 0x0 "TH8_11_LOWER,Lower comparator trigger level channel 8-11"
hexmask.long.byte 0x0 24.--31. 1. "CH11_LOW,Channel 11 lower trigger level"
newline
hexmask.long.byte 0x0 16.--23. 1. "CH10_LOW,Channel 10 lower trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "CH9_LOW,Channel 9 lower trigger level"
newline
hexmask.long.byte 0x0 0.--7. 1. "CH8_LOW,Channel 8 lower trigger level"
group.long 0xD0++0x3
line.long 0x0 "TH8_11_UPPER,Upper comparator trigger level channel 8-11 register"
hexmask.long.byte 0x0 24.--31. 1. "CH11_UP,Channel 11 upper trigger level"
newline
hexmask.long.byte 0x0 16.--23. 1. "CH10_UP,Channel 10 upper trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "CH9_UP,Channel 9 upper trigger level"
newline
hexmask.long.byte 0x0 0.--7. 1. "CH8_UP,Channel 8 upper trigger level"
tree.end
tree "ADC2 (Measurement Core Module)"
base ad:0x4801C000
group.long 0x34++0xF
line.long 0x0 "CAL_CH0_1,Calibration for channel 0 and 1 register"
hexmask.long.byte 0x0 24.--31. 1. "GAIN_CH1,Gain calibration for channel 1"
hexmask.long.byte 0x0 16.--20. 1. "OFFS_CH1,Offset calibration for channel 1"
newline
hexmask.long.byte 0x0 8.--15. 1. "GAIN_CH0,Gain calibration for channel 0"
hexmask.long.byte 0x0 0.--4. 1. "OFFS_CH0,Offset calibration for channel 0"
line.long 0x4 "CAL_CH2_3,Calibration for channel 2 and 3 register"
hexmask.long.byte 0x4 24.--31. 1. "GAIN_CH3,Gain calibration for channel 3"
hexmask.long.byte 0x4 16.--20. 1. "OFFS_CH3,Offset calibration for channel 3"
newline
hexmask.long.byte 0x4 8.--15. 1. "GAIN_CH2,Gain calibration for channel 2"
hexmask.long.byte 0x4 0.--4. 1. "OFFS_CH2,Offset calibration for channel 2"
line.long 0x8 "CAL_CH4_5,Calibration for channel 4 and 5 register"
hexmask.long.byte 0x8 24.--31. 1. "GAIN_CH5,Gain calibration for channel 5"
hexmask.long.byte 0x8 16.--20. 1. "OFFS_CH5,Offset calibration for channel 5"
newline
hexmask.long.byte 0x8 8.--15. 1. "GAIN_CH4,Gain calibration for channel 4"
hexmask.long.byte 0x8 0.--4. 1. "OFFS_CH4,Offset calibration for channel 4"
line.long 0xC "CAL_CH6_7,Calibration for channel 6 and 7 register"
hexmask.long.byte 0xC 8.--15. 1. "GAIN_CH6,Gain calibration for channel 6"
hexmask.long.byte 0xC 0.--4. 1. "OFFS_CH6,Offset calibration for channel 6"
group.long 0x8++0x3
line.long 0x0 "CHx_EIM,Channel settings bits for exceptional interrupt measurement register"
bitfld.long 0x0 12. "SEL,Exceptional interrupt measurement (EIM) trigger select" "0: GPT12PISEL.T3_GPT12_SEL GPT12_PISEL triggers EIM,1: Not supported"
bitfld.long 0x0 11. "EN,Exceptional interrupt measurement (EIM) trigger event enable" "0: Start of EIM disabled,1: Start of EIM enabled"
newline
bitfld.long 0x0 8.--10. "REP,Repeat count for exceptional interrupt measurement (EIM)" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 64 measurements,7: 128 measurements"
bitfld.long 0x0 0.--2. "CHx_SEL,Channel set for exceptional interrupt measurement (EIM)" "0: Channel 0 enable,1: Channel 1 enable,2: Channel 2 enable,3: Channel 3 enable,4: Channel 4 enable,5: Channel 5 enable,6: Channel 6 enable,?"
group.long 0x98++0x3
line.long 0x0 "CNT0_3_LOWER,Lower counter trigger level channel 0-3 register"
bitfld.long 0x0 27.--28. "HYST_LO_CH3,Channel 3 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 24.--26. "CNT_LO_CH3,Lower timer trigger threshold channel 3" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_LO_CH2,Channel 2 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 16.--18. "CNT_LO_CH2,Lower timer trigger threshold channel 2" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_LO_CH1,Channel 1 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 8.--10. "CNT_LO_CH1,Lower timer trigger threshold channel 1" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_LO_CH0,Channel 0 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 0.--2. "CNT_LO_CH0,Lower timer trigger threshold channel 0" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0xA4++0x3
line.long 0x0 "CNT0_3_UPPER,Upper counter trigger level channel 0-3 register"
bitfld.long 0x0 27.--28. "HYST_UP_CH3,Channel 3 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 24.--26. "CNT_UP_CH3,Upper timer trigger threshold channel 3" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_UP_CH2,Channel 2 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 16.--18. "CNT_UP_CH2,Upper timer trigger threshold channel 2" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_UP_CH1,Channel 1 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 8.--10. "CNT_UP_CH1,Upper timer trigger threshold channel 1" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_UP_CH0,Channel 0 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 0.--2. "CNT_UP_CH0,Upper timer trigger threshold channel 0" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0x9C++0x3
line.long 0x0 "CNT4_7_LOWER,Lower counter trigger level channel 4-7 register"
bitfld.long 0x0 27.--28. "HYST_LO_CH7,Channel 6 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 24.--26. "CNT_LO_CH7,Lower timer trigger threshold channel 6" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_LO_CH6,Channel 6 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 16.--18. "CNT_LO_CH6,Lower timer trigger threshold channel 6" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_LO_CH5,Channel 5 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 8.--10. "CNT_LO_CH5,Lower timer trigger threshold channel 5" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_LO_CH4,Channel 4 lower hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 0.--2. "CNT_LO_CH4,Lower timer trigger threshold channel 4" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0xA8++0x3
line.long 0x0 "CNT4_7_UPPER,Upper counter trigger level channel 4-7 register"
bitfld.long 0x0 27.--28. "HYST_UP_CH7,Channel 7 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 24.--26. "CNT_UP_CH7,Upper timer trigger threshold channel 7" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 19.--20. "HYST_UP_CH6,Channel 6 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 16.--18. "CNT_UP_CH6,Upper timer trigger threshold channel 6" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 11.--12. "HYST_UP_CH5,Channel 5 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 8.--10. "CNT_UP_CH5,Upper timer trigger threshold channel 5" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
newline
bitfld.long 0x0 3.--4. "HYST_UP_CH4,Channel 4 upper hysteresis" "0: Hysteresis switched off,1: Hysteresis = 4,2: Hysteresis = 8,3: Hysteresis = 16"
bitfld.long 0x0 0.--2. "CNT_UP_CH4,Upper timer trigger threshold channel 4" "0: 1 measurement,1: 2 measurements,2: 4 measurements,3: 8 measurements,4: 16 measurements,5: 32 measurements,6: 63 measurements,7: 63 measurements"
group.long 0x0++0x3
line.long 0x0 "CTRL_STS,ADC2 control and status register"
hexmask.long.byte 0x0 8.--11. 1. "IN_MUX_SEL,Channel for software mode"
rbitfld.long 0x0 3. "EOC,ADC2 end of conversion (software mode)" "0: Conversion still running,1: Conversion has finished"
newline
bitfld.long 0x0 2. "SOS,ADC2 start of sampling/conversion (software mode)" "0: No conversion is started,1: Conversion is started"
group.long 0x14++0xB
line.long 0x0 "CTRL1,Measurement unit control 1 register"
hexmask.long.byte 0x0 0.--6. 1. "CALIB_EN_6_0,Calibration enable for channels 6 to 0"
line.long 0x4 "CTRL2,Measurement unit control 2 register"
hexmask.long.byte 0x4 8.--11. 1. "SAMPLE_TIME_int,Sample time of ADC2"
rbitfld.long 0x4 7. "MCM_RDY,Ready signal for MCM" "0: Measurement core module in start-up phase,1: Measurement core module start-up phase finished"
newline
bitfld.long 0x4 0. "MCM_PD_N,Power down signal for MCM" "0: Measurement core module disabled,1: Measurement core module enabled"
line.long 0x8 "CTRL4,Measurement unit control 4 register"
hexmask.long.byte 0x8 0.--6. 1. "FILT_OUT_SEL_6_0,Output filter selection for channels 0 to 6"
group.long 0x7C++0x3
line.long 0x0 "FILT_LO_CTRL,Lower threshold filter enable register"
bitfld.long 0x0 6. "LOEN_Ch6,Lower threshold IIR filter enable ch 6" "0: Disable,1: Enable"
bitfld.long 0x0 5. "LOEN_Ch5,Lower threshold IIR filter enable ch 5" "0: Disable,1: Enable"
newline
bitfld.long 0x0 4. "LOEN_Ch4,Lower threshold IIR filter enable ch 4" "0: Disable,1: Enable"
bitfld.long 0x0 3. "LOEN_Ch3,Lower threshold IIR filter enable ch 3" "0: Disable,1: Enable"
newline
bitfld.long 0x0 2. "LOEN_Ch2,Lower threshold IIR filter enable ch 2" "0: Disable,1: Enable"
bitfld.long 0x0 1. "LOEN_Ch1,Lower threshold IIR filter enable ch 1" "0: Disable,1: Enable"
newline
bitfld.long 0x0 0. "LOEN_Ch0,Lower threshold IIR filter enable ch 0" "0: Disable,1: Enable"
rgroup.long 0x50++0x1B
line.long 0x0 "FILT_OUT0,ADC or filter output channel 0 register"
hexmask.long.word 0x0 0.--9. 1. "OUT_CH0,ADC or filter output value channel 0"
line.long 0x4 "FILT_OUT1,ADC or filter output channel 1 register"
hexmask.long.word 0x4 0.--9. 1. "OUT_CH1,ADC or filter output value channel 1"
line.long 0x8 "FILT_OUT2,ADC or filter output channel 2 register"
hexmask.long.word 0x8 0.--9. 1. "OUT_CH2,ADC or filter output value channel 2"
line.long 0xC "FILT_OUT3,ADC or filter output channel 3 register"
hexmask.long.word 0xC 0.--9. 1. "OUT_CH3,ADC or filter output value channel 3"
line.long 0x10 "FILT_OUT4,ADC or filter output channel 4 register"
hexmask.long.word 0x10 0.--9. 1. "OUT_CH4,ADC or filter output value channel 4"
line.long 0x14 "FILT_OUT5,ADC or filter output channel 5 register"
hexmask.long.word 0x14 0.--9. 1. "OUT_CH5,ADC or filter output value channel 5"
line.long 0x18 "FILT_OUT6,ADC or filter output channel 6 register"
hexmask.long.word 0x18 0.--9. 1. "OUT_CH6,ADC or filter output value channel 6"
group.long 0x78++0x3
line.long 0x0 "FILT_UP_CTRL,Upper threshold filter enable register"
bitfld.long 0x0 6. "UPEN_Ch6,Upper threshold IIR filter enable ch 6" "0: Disable,1: Enable"
bitfld.long 0x0 5. "UPEN_Ch5,Upper threshold IIR filter enable ch 5" "0: Disable,1: Enable"
newline
bitfld.long 0x0 4. "UPEN_Ch4,Upper threshold IIR filter enable ch 4" "0: Disable,1: Enable"
bitfld.long 0x0 3. "UPEN_Ch3,Upper threshold IIR filter enable ch 3" "0: Disable,1: Enable"
newline
bitfld.long 0x0 2. "UPEN_Ch2,Upper threshold IIR filter enable ch 2" "0: Disable,1: Enable"
bitfld.long 0x0 1. "UPEN_Ch1,Upper threshold IIR filter enable ch 1" "0: Disable,1: Enable"
newline
bitfld.long 0x0 0. "UPEN_Ch0,Upper threshold IIR filter enable ch 0" "0: Disable,1: Enable"
group.long 0x48++0x3
line.long 0x0 "FILTCOEFF0_7,Filter coefficients ADC channel 0-7 register"
bitfld.long 0x0 14.--15. "A_CH7,Filter coefficient A for ADC channel 7" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
bitfld.long 0x0 12.--13. "A_CH6,Filter coefficient A for ADC channel 6" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 10.--11. "A_CH5,Filter coefficient A for ADC channel 5" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
bitfld.long 0x0 8.--9. "A_CH4,Filter coefficient A for ADC channel 4" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 6.--7. "A_CH3,Filter coefficient A for ADC channel 3" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
bitfld.long 0x0 4.--5. "A_CH2,Filter coefficient A for ADC channel 2" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
newline
bitfld.long 0x0 2.--3. "A_CH1,Filter coefficient A for ADC channel 1" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
bitfld.long 0x0 0.--1. "A_CH0,Filter coefficient A for ADC channel 0" "0: 1/2 weight of current sample,1: 1/4 weight of current sample,2: 1/8 weight of current sample,3: 1/16 weight of current sample"
group.long 0x10++0x3
line.long 0x0 "MAX_TIME,Maximum time for software mode register"
hexmask.long.byte 0x0 0.--7. 1. "MAX_TIME,Maximum time in software mode"
group.long 0xB0++0x3
line.long 0x0 "MMODE0_7,Overvoltage measurement mode of channel 0-7 register"
bitfld.long 0x0 14.--15. "MSEL_Ch7,Measurement mode ch 7" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
bitfld.long 0x0 12.--13. "MSEL_Ch6,Measurement mode ch 6" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 10.--11. "MSEL_Ch5,Measurement mode ch 5" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
bitfld.long 0x0 8.--9. "MSEL_Ch4,Measurement mode ch 4" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 6.--7. "MSEL_Ch3,Measurement mode ch 3" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
bitfld.long 0x0 4.--5. "MSEL_Ch2,Measurement mode ch 2" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
newline
bitfld.long 0x0 2.--3. "MSEL_Ch1,Measurement mode ch 1" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
bitfld.long 0x0 0.--1. "MSEL_Ch0,Measurement mode ch 0" "0: Upper & lower voltage/limit measurement,1: Undervoltage/-limit measurement,2: Overvoltage/-limit measurement,?"
rgroup.long 0x4++0x3
line.long 0x0 "SQ_FB,Sequencer feedback register"
hexmask.long.byte 0x0 16.--19. 1. "CHx_STS,Current ADC2 channel"
bitfld.long 0x0 11.--13. "SQx_STS,Current active ADC2 sequence" "0: Sequence 1 enable,1: Sequence 2 enable,2: Sequence 3 enable,3: Sequence 4 enable,4: Sequence 5 enable,5: Sequence 6 enable,6: Sequence 7 enable,?"
newline
bitfld.long 0x0 9. "EIM_ACTIVE,ADC2 EIM active" "0: EIM not active,1: EIM active"
bitfld.long 0x0 8. "SQ_STOP,ADC2 sequencer stop signal for DPP" "0: Post processing sequencer in running mode,1: Post processing sequencer stopped/software mode.."
newline
hexmask.long.byte 0x0 0.--3. 1. "SQ_FB,Current sequence that caused software mode"
group.long 0x20++0x7
line.long 0x0 "SQ1_4,Measurement channel enable bits for cycle 1-4 register"
hexmask.long.byte 0x0 24.--30. 1. "SQ4,Sequence 4 channel enable"
hexmask.long.byte 0x0 16.--22. 1. "SQ3,Sequence 3 channel enable"
newline
hexmask.long.byte 0x0 8.--14. 1. "SQ2,Sequence 2 channel enable"
hexmask.long.byte 0x0 0.--6. 1. "SQ1,Sequence 1 channel enable"
line.long 0x4 "SQ5_8,Measurement channel enable bits for cycle 5-8 register"
hexmask.long.byte 0x4 16.--22. 1. "SQ7,Sequence 7 channel enable"
hexmask.long.byte 0x4 8.--14. 1. "SQ6,Sequence 6 channel enable"
newline
hexmask.long.byte 0x4 0.--6. 1. "SQ5,Sequence 5 channel enable"
rgroup.long 0xBC++0x3
line.long 0x0 "STATUS,ADC2 HV status register"
bitfld.long 0x0 1. "READY,HVADC ready bit" "0: Module in power down or in init phase,1: Set automatically 5 ADC clock cycles after.."
group.long 0x80++0x3
line.long 0x0 "TH0_3_LOWER,Lower comparator trigger level channel 0-3 register"
hexmask.long.byte 0x0 24.--31. 1. "THLO_CH3,Channel 3 lower trigger level"
hexmask.long.byte 0x0 16.--23. 1. "THLO_CH2,Channel 2 lower trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "THLO_CH1,Channel 1 lower trigger level"
hexmask.long.byte 0x0 0.--7. 1. "THLO_CH0,Channel 0 lower trigger level"
group.long 0x8C++0x3
line.long 0x0 "TH0_3_UPPER,Upper comparator trigger level channel 0-3 register"
hexmask.long.byte 0x0 24.--31. 1. "THUP_CH3,Channel 3 upper trigger level"
hexmask.long.byte 0x0 16.--23. 1. "THUP_CH2,Channel 2 upper trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "THUP_CH1,Channel 1 upper trigger level"
hexmask.long.byte 0x0 0.--7. 1. "THUP_CH0,Channel 0 upper trigger level"
group.long 0x84++0x3
line.long 0x0 "TH4_7_LOWER,Lower comparator trigger level channel 4-7 register"
hexmask.long.byte 0x0 24.--31. 1. "THLO_CH7,Channel 7 lower trigger level"
hexmask.long.byte 0x0 16.--23. 1. "THLO_CH6,Channel 6 lower trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "THLO_CH5,Channel 5 lower trigger level"
hexmask.long.byte 0x0 0.--7. 1. "THLO_CH4,Channel 4 lower trigger level"
group.long 0x90++0x3
line.long 0x0 "TH4_7_UPPER,Upper comparator trigger level channel 4-7 register"
hexmask.long.byte 0x0 24.--31. 1. "THUP_CH7,Channel 7 upper trigger level"
hexmask.long.byte 0x0 16.--23. 1. "THUP_CH6,Channel 6 upper trigger level"
newline
hexmask.long.byte 0x0 8.--15. 1. "THUP_CH5,Channel 5 upper trigger level"
hexmask.long.byte 0x0 0.--7. 1. "THUP_CH4,Channel 4 upper trigger level"
tree.end
tree.end
tree "CCU6 (Capture/Compare Unit 6)"
base ad:0x4000C000
rgroup.word 0x34++0x1
line.word 0x0 "CC60R,Capture/compare register for channel CC60 register"
hexmask.word 0x0 0.--15. 1. "CCV,Channel 0 capture/compare value"
group.word 0x14++0x1
line.word 0x0 "CC60SR,Capture/compare shadow register for channel CC60 register"
hexmask.word 0x0 0.--15. 1. "CCS,Shadow register for channel 0 capture/compare value"
rgroup.word 0x38++0x1
line.word 0x0 "CC61R,Capture/compare register for channel CC61 register"
hexmask.word 0x0 0.--15. 1. "CCV,Channel 1 capture/compare value"
group.word 0x18++0x1
line.word 0x0 "CC61SR,Capture/compare shadow register for channel CC61 register"
hexmask.word 0x0 0.--15. 1. "CCS,Shadow register for channel 1 capture/compare value"
rgroup.word 0x3C++0x1
line.word 0x0 "CC62R,Capture/compare register for channel CC62 register"
hexmask.word 0x0 0.--15. 1. "CCV,Channel 2 capture/compare value"
group.word 0x1C++0x1
line.word 0x0 "CC62SR,Capture/compare shadow register for channel CC62 register"
hexmask.word 0x0 0.--15. 1. "CCS,Shadow register for channel 2 capture/compare value"
rgroup.word 0x0++0x1
line.word 0x0 "CC63R,Capture/compare for channel CC63 register"
hexmask.word 0x0 0.--15. 1. "CCV,Channel CC63 compare value low byte"
group.word 0x20++0x1
line.word 0x0 "CC63SR,Capture/compare shadow for channel CC63 register"
hexmask.word 0x0 0.--15. 1. "CCS,Shadow register for channel CC63 compare value"
wgroup.word 0x10++0x1
line.word 0x0 "CMPMODIF,Compare state modification register"
bitfld.word 0x0 14. "MCC63R,Capture/compare status modification bits (reset)" "0,1"
bitfld.word 0x0 10. "MCC62R,Capture/compare status modification bit 2 (reset)" "0,1"
newline
bitfld.word 0x0 9. "MCC61R,Capture/compare status modification bit 1 (reset)" "0,1"
bitfld.word 0x0 8. "MCC60R,Capture/compare status modification bit 0 (reset)" "0,1"
newline
bitfld.word 0x0 6. "MCC63S,Capture/compare status modification bits (set)" "0,1"
bitfld.word 0x0 2. "MCC62S,Capture/compare status modification bit 2 (set)" "0,1"
newline
bitfld.word 0x0 1. "MCC61S,Capture/compare status modification bit 1 (set)" "0,1"
bitfld.word 0x0 0. "MCC60S,Capture/compare status modification bit 0 (set)" "0,1"
group.word 0x80++0x1
line.word 0x0 "CMPSTAT,Compare state register"
bitfld.word 0x0 15. "T13IM,T13 inverted modulation" "0: T13 output is not inverted,1: T13 output is inverted for further modulation"
bitfld.word 0x0 14. "COUT63PS,Passive state select for compare outputs" "0: The corresponding compare output drives passive..,1: The corresponding compare output drives passive.."
newline
bitfld.word 0x0 13. "COUT62PS,Passive state select for compare outputs" "0: The corresponding compare output drives passive..,1: The corresponding compare output drives passive.."
bitfld.word 0x0 12. "CC62PS,Passive state select for compare outputs" "0: The corresponding compare output drives passive..,1: The corresponding compare output drives passive.."
newline
bitfld.word 0x0 11. "COUT61PS,Passive state select for compare outputs" "0: The corresponding compare output drives passive..,1: The corresponding compare output drives passive.."
bitfld.word 0x0 10. "CC61PS,Passive state select for compare outputs" "0: The corresponding compare output drives passive..,1: The corresponding compare output drives passive.."
newline
bitfld.word 0x0 9. "COUT60PS,Passive state select for compare outputs" "0: The corresponding compare output drives passive..,1: The corresponding compare output drives passive.."
bitfld.word 0x0 8. "CC60PS,Passive state select for compare outputs" "0: The corresponding compare output drives passive..,1: The corresponding compare output drives passive.."
newline
rbitfld.word 0x0 6. "CC63ST,Capture/compare state bits" "0: In compare mode the timer count is less than the..,1: In compare mode the counter value is greater.."
rbitfld.word 0x0 5. "CCPOS2,Sampled Hall pattern bit 2" "0: The input CCPOS2 has been sampled as 0,1: The input CCPOS2 has been sampled as 1"
newline
rbitfld.word 0x0 4. "CCPOS1,Sampled Hall pattern bit 1" "0: The input CCPOS1 has been sampled as 0,1: The input CCPOS1 has been sampled as 1"
rbitfld.word 0x0 3. "CCPOS0,Sampled Hall pattern bit 0" "0: The input CCPOS0 has been sampled as 0,1: The input CCPOS0 has been sampled as 1"
newline
rbitfld.word 0x0 2. "CC62ST,Capture/compare state bits" "0: In compare mode the timer count is less than the..,1: In compare mode the counter value is greater.."
rbitfld.word 0x0 1. "CC61ST,Capture/compare state bits" "0: In compare mode the timer count is less than the..,1: In compare mode the counter value is greater.."
newline
rbitfld.word 0x0 0. "CC60ST,Capture/compare state bits" "0: In compare mode the timer count is less than the..,1: In compare mode the counter value is greater.."
group.word 0x44++0x1
line.word 0x0 "IEN,Capture/compare interrupt enable register"
bitfld.word 0x0 15. "ENSTR,Enable multi-channel mode shadow transfer interrupt" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
bitfld.word 0x0 14. "ENIDLE,Enable idle" "0: The bit IDLE is not automatically set when a..,1: The bit IDLE is automatically set when a wrong.."
newline
bitfld.word 0x0 13. "ENWHE,Enable interrupt for wrong Hall Event" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
bitfld.word 0x0 12. "ENCHE,Enable interrupt for correct Hall Event" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
newline
bitfld.word 0x0 10. "ENTRPF,Enable interrupt for trap flag" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
bitfld.word 0x0 9. "ENT13PM,Enable interrupt for T13 period-match" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
newline
bitfld.word 0x0 8. "ENT13CM,Enable interrupt for T13 compare-match" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
bitfld.word 0x0 7. "ENT12PM,Enable interrupt for T12 period-match" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
newline
bitfld.word 0x0 6. "ENT12OM,Enable interrupt for T12 one-match" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
bitfld.word 0x0 5. "ENCC62F,Capture  compare-match falling edge interrupt enable for channel 2" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
newline
bitfld.word 0x0 4. "ENCC62R,Capture  compare-match rising edge interrupt enable for channel 2" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
bitfld.word 0x0 3. "ENCC61F,Capture  compare-match falling edge interrupt enable for channel 1" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
newline
bitfld.word 0x0 2. "ENCC61R,Capture  compare-match rising edge interrupt enable for channel 1" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
bitfld.word 0x0 1. "ENCC60F,Capture  compare-match falling edge interrupt enable for channel 0" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
newline
bitfld.word 0x0 0. "ENCC60R,Capture  compare-match rising edge interrupt enable for channel 0" "0: No interrupt will be generated if the set..,1: An interrupt will be generated if the set.."
group.word 0x48++0x1
line.word 0x0 "INP,Capture/compare interrupt node pointer register"
bitfld.word 0x0 12.--13. "INPT13,Interrupt node pointer for timer T13 interrupts" "0: Interrupt output line SR0 is selected,1: Interrupt output line SR1 is selected,2: Interrupt output line SR2 is selected,3: Interrupt output line SR3 is selected"
bitfld.word 0x0 10.--11. "INPT12,Interrupt node pointer for timer T12 interrupts" "0: Interrupt output line SR0 is selected,1: Interrupt output line SR1 is selected,2: Interrupt output line SR2 is selected,3: Interrupt output line SR3 is selected"
newline
bitfld.word 0x0 8.--9. "INPERR,Interrupt node pointer for error interrupts" "0: Interrupt output line SR0 is selected,1: Interrupt output line SR1 is selected,2: Interrupt output line SR2 is selected,3: Interrupt output line SR3 is selected"
bitfld.word 0x0 6.--7. "INPCHE,Interrupt node pointer for the CHE interrupt" "0: Interrupt output line SR0 is selected,1: Interrupt output line SR1 is selected,2: Interrupt output line SR2 is selected,3: Interrupt output line SR3 is selected"
newline
bitfld.word 0x0 4.--5. "INPCC62,Interrupt node pointer for channel 2 interrupts" "0: Interrupt output line SR0 is selected,1: Interrupt output line SR1 is selected,2: Interrupt output line SR2 is selected,3: Interrupt output line SR3 is selected"
bitfld.word 0x0 2.--3. "INPCC61,Interrupt node pointer for channel 1 interrupts" "0: Interrupt output line SR0 is selected,1: Interrupt output line SR1 is selected,2: Interrupt output line SR2 is selected,3: Interrupt output line SR3 is selected"
newline
bitfld.word 0x0 0.--1. "INPCC60,Interrupt node pointer for channel 0 interrupts" "0: Interrupt output line SR0 is selected,1: Interrupt output line SR1 is selected,2: Interrupt output line SR2 is selected,3: Interrupt output line SR3 is selected"
rgroup.word 0x68++0x1
line.word 0x0 "IS,Capture/compare interrupt status register"
bitfld.word 0x0 15. "STR,Multi-channel mode shadow transfer request" "0: The shadow transfer has not yet taken place,1: The shadow transfer has taken place"
bitfld.word 0x0 14. "IDLE,IDLE state" "0: No action,1: Bit field MCMP is cleared and held to 0 the.."
newline
bitfld.word 0x0 13. "WHE,Wrong Hall event" "0: A transition to a wrong Hall event (not the..,1: A transition to a wrong Hall event (not the.."
bitfld.word 0x0 12. "CHE,Correct Hall event" "0: A transition to a correct (= expected) Hall..,1: A transition to a correct (= expected) Hall.."
newline
bitfld.word 0x0 11. "TRPS,Trap state" "0: The trap state is not active,1: The trap state is active. Bit TRPS is set while.."
bitfld.word 0x0 10. "TRPF,Trap flag" "0: The trap condition has not been detected,1: The trap condition has been detected (input.."
newline
bitfld.word 0x0 9. "T13PM,Timer T13 period-match flag" "0: A timer T13 period-match has not yet been..,1: A timer T13 period-match has been detected"
bitfld.word 0x0 8. "T13CM,Timer T13 compare-match flag" "0: A timer T13 compare-match has not yet been..,1: A timer T13 compare-match has been detected"
newline
bitfld.word 0x0 7. "T12PM,Timer T12 period-match flag" "0: A timer T12 period-match (while counting up) has..,1: A timer T12 period-match (while counting up) has.."
bitfld.word 0x0 6. "T12OM,Timer T12 one-match flag" "0: A timer T12 one-match (while counting down) has..,1: A timer T12 one-match (while counting down) has.."
newline
bitfld.word 0x0 5. "ICC62F,Capture  compare-match falling edge flag" "0: The event has not yet occurred since this bit..,1: The event described above has been detected"
bitfld.word 0x0 4. "ICC62R,Capture  compare-match rising edge flag" "0: The event has not yet occurred since this bit..,1: The event described above has been detected"
newline
bitfld.word 0x0 3. "ICC61F,Capture  compare-match falling edge flag" "0: The event has not yet occurred since this bit..,1: The event described above has been detected"
bitfld.word 0x0 2. "ICC61R,Capture  compare-match rising edge flag" "0: The event has not yet occurred since this bit..,1: The event described above has been detected"
newline
bitfld.word 0x0 1. "ICC60F,Capture  compare-match falling edge flag" "0: The event has not yet occurred since this bit..,1: The event described above has been detected"
bitfld.word 0x0 0. "ICC60R,Capture  compare-match rising edge flag" "0: The event has not yet occurred since this bit..,1: The event described above has been detected"
wgroup.word 0xC++0x1
line.word 0x0 "ISR,Capture/compare interrupt status reset register"
bitfld.word 0x0 15. "RSTR,Reset STR flag" "0: No action,1: Bit STR in register IS will be reset"
bitfld.word 0x0 14. "RIDLE,Reset IDLE flag" "0: No action,1: Bit IDLE in register IS will be reset"
newline
bitfld.word 0x0 13. "RWHE,Reset wrong Hall event flag" "0: No action,1: Bit WHE in register IS will be reset"
bitfld.word 0x0 12. "RCHE,Reset correct Hall event flag" "0: No action,1: Bit CHE in register IS will be reset"
newline
bitfld.word 0x0 10. "RTRPF,Reset trap flag" "0: No action,1: Bit TRPF in register IS will be reset (not taken.."
bitfld.word 0x0 9. "RT13PM,Reset timer T13 period-Match flag" "0: No action,1: Bit T13PM in register IS will be reset"
newline
bitfld.word 0x0 8. "RT13CM,Reset timer T13 compare-match flag" "0: No action,1: Bit T13CM in register IS will be reset"
bitfld.word 0x0 7. "RT12PM,Reset timer T12 period-match flag" "0: No action,1: Bit T12PM in register IS will be reset"
newline
bitfld.word 0x0 6. "RT12OM,Reset timer T12 one-match flag" "0: No action,1: Bit T12OM in register IS will be reset"
bitfld.word 0x0 5. "RCC62F,Reset capture  compare-match falling edge flag" "0: No action,1: Bit CC62F in register IS will be reset"
newline
bitfld.word 0x0 4. "RCC62R,Reset capture  compare-match rising edge flag" "0: No action,1: Bit CC62R in register IS will be reset"
bitfld.word 0x0 3. "RCC61F,Reset capture  compare-match falling edge flag" "0: No action,1: Bit CC61F in register IS will be reset"
newline
bitfld.word 0x0 2. "RCC61R,Reset capture  compare-match rising edge Flag" "0: No action,1: Bit CC61R in register IS will be reset"
bitfld.word 0x0 1. "RCC60F,Reset capture  compare-match falling edge flag" "0: No action,1: Bit CC60F in register IS will be reset"
newline
bitfld.word 0x0 0. "RCC60R,Reset capture  compare-match rising edge flag" "0: No action,1: Bit CC60R in register IS will be reset"
wgroup.word 0x4C++0x1
line.word 0x0 "ISS,Capture/compare interrupt status set register"
bitfld.word 0x0 15. "SSTR,Set STR flag" "0: No action,1: Bit STR in register IS will be set"
bitfld.word 0x0 14. "SIDLE,Set IDLE flag" "0: No action,1: Bit IDLE in register IS will be set"
newline
bitfld.word 0x0 13. "SWHE,Set wrong Hall event flag" "0: No action,1: Bit WHE in register IS will be set"
bitfld.word 0x0 12. "SCHE,Set correct Hall event flag" "0: No action,1: Bit CHE in register IS will be set"
newline
bitfld.word 0x0 11. "SWHC,Software Hall compare" "0: No action,1: The Hall compare action is triggered"
bitfld.word 0x0 10. "STRPF,Set trap flag" "0: No action,1: Bits TRPF and TRPS in register IS will be set"
newline
bitfld.word 0x0 9. "ST13PM,Set timer T13 period-match flag" "0: No action,1: Bit T13PM in register IS will be set"
bitfld.word 0x0 8. "ST13CM,Set timer T13 compare-match flag" "0: No action,1: Bit T13CM in register IS will be set"
newline
bitfld.word 0x0 7. "ST12PM,Set timer T12 period-match flag" "0: No action,1: Bit T12PM in register IS will be set"
bitfld.word 0x0 6. "ST12OM,Set timer T12 one-match flag" "0: No action,1: Bit T12OM in register IS will be set"
newline
bitfld.word 0x0 5. "SCC62F,Set capture  compare-match falling edge flag" "0: No action,1: Bit CC62F in register IS will be set"
bitfld.word 0x0 4. "SCC62R,Set capture  compare-match rising edge flag" "0: No action,1: Bit CC62R in register IS will be set"
newline
bitfld.word 0x0 3. "SCC61F,Set capture  compare-match falling edge flag" "0: No action,1: Bit CC61F in register IS will be set"
bitfld.word 0x0 2. "SCC61R,Set capture  compare-match rising edge flag" "0: No action,1: Bit CC61R in register IS will be set"
newline
bitfld.word 0x0 1. "SCC60F,Set capture  compare-match falling edge flag" "0: No action,1: Bit CC60F in register IS will be set"
bitfld.word 0x0 0. "SCC60R,Set capture  compare-match rising edge flag" "0: No action,1: Bit CC60R in register IS will be set"
group.word 0x54++0x1
line.word 0x0 "MCMCTR,Multi-channel mode control register"
bitfld.word 0x0 10. "STE13U,Shadow transfer enable for T13 upcounting" "0: No action,1: The T13_ST shadow transfer mechanism is enabled.."
bitfld.word 0x0 9. "STE12D,Shadow transfer Enable for T12 downcounting" "0: No action,1: The T12_ST shadow transfer mechanism is enabled.."
newline
bitfld.word 0x0 8. "STE12U,Shadow transfer enable for T12 upcounting" "0: No action,1: The T12_ST shadow transfer mechanism is enabled.."
bitfld.word 0x0 4.--5. "SWSYN,Switching Synchronization" "0: The trigger event directly causes the shadow..,1: T13 zero-match triggers the shadow transfer,2: A T12 zero-match (while counting up) triggers..,?"
newline
bitfld.word 0x0 0.--2. "SWSEL,Switching selection" "0: No trigger request will be generated,1: Correct hall pattern on CCPOSx detected,2: T13 period-match detected (while counting up),3: T12 one-match (while counting down),4: T12 channel 1 compare-match detected (phase..,5: T12 period match detected (while counting up)..,?,?"
rgroup.word 0x64++0x1
line.word 0x0 "MCMOUT,Multi-channel mode output register"
bitfld.word 0x0 11.--13. "CURH,Current Hall pattern" "0,1,2,3,4,5,6,7"
bitfld.word 0x0 8.--10. "EXPH,Expected Hall pattern" "0,1,2,3,4,5,6,7"
newline
bitfld.word 0x0 6. "R,Reminder Flag" "0: No shadow transfer currently no shadow transfer..,1: A shadow transfer from MCMPS to MCMP has been.."
hexmask.word.byte 0x0 0.--5. 1. "MCMP,Multi-channel PWM pattern"
group.word 0x8++0x1
line.word 0x0 "MCMOUTS,Multi-channel mode output shadow register"
bitfld.word 0x0 15. "STRHP,Shadow transfer request for the Hall pattern" "0: The bit fields CURH and EXPH are updated..,1: The bit fields CURH and EXPH are updated by the.."
bitfld.word 0x0 11.--13. "CURHS,Current Hall pattern shadow" "0,1,2,3,4,5,6,7"
newline
bitfld.word 0x0 8.--10. "EXPHS,Expected Hall pattern shadow" "0,1,2,3,4,5,6,7"
bitfld.word 0x0 7. "STRMCM,Shadow transfer request for MCMPS" "0: Bit field MCMP is updated according to the..,1: Bit field MCMP is updated by the value written.."
newline
hexmask.word.byte 0x0 0.--5. 1. "MCMPS,Multi-channel PWM pattern shadow"
group.word 0x5C++0x1
line.word 0x0 "MODCTR,Modulation control register"
bitfld.word 0x0 15. "ECT13O,Enable compare timer T13 output" "0: The alternate output function COUT63 is disabled,1: The alternate output function COUT63 is enabled.."
hexmask.word.byte 0x0 8.--13. 1. "T13MODEN,T13 modulation enable"
newline
bitfld.word 0x0 7. "MCMEN,Multi-channel mode enable" "0: The modulation of the corresponding output..,1: The modulation of the corresponding output.."
hexmask.word.byte 0x0 0.--5. 1. "T12MODEN,T12 modulation enable"
group.word 0x6C++0x1
line.word 0x0 "PISEL0,Port input select 0 register"
bitfld.word 0x0 14.--15. "IST12HR,Input select for T12HR" "0: Either signal T12HRA (if T12EXT = 0) or T12HRE..,1: Either signal T12HRB (if T12EXT = 0) or T12HRF..,2: Either signal T12HRC (if T12EXT = 0) or T12HRG..,3: Either signal T12HRD (if T12EXT = 0) or T12HRH.."
bitfld.word 0x0 12.--13. "ISPOS2,Input select for CCPOS2" "0: The input pin for CCPOS2_0,1: The input pin for CCPOS2_1,2: The input pin for CCPOS2_2,3: The input pin for CCPOS2_3"
newline
bitfld.word 0x0 10.--11. "ISPOS1,Input select for CCPOS1" "0: The input pin for CCPOS1_0,1: The input pin for CCPOS1_1,2: The input pin for CCPOS1_2,3: The input pin for CCPOS1_3"
bitfld.word 0x0 8.--9. "ISPOS0,Input select for CCPOS0" "0: The input pin for CCPOS0_0,1: The input pin for CCPOS0_1,2: The input pin for CCPOS0_2,3: The input pin for CCPOS0_3"
newline
bitfld.word 0x0 6.--7. "ISTRP,Input select for CTRAP" "0: The input pin for CTRAP_0,1: The input pin for CTRAP_1,2: The input pin for CTRAP_2,3: Signal from differential units"
bitfld.word 0x0 4.--5. "ISCC62,Input select for CC62" "0: The input pin for CC62_0,1: The input pin for CC62_1,?,?"
newline
bitfld.word 0x0 2.--3. "ISCC61,Input select for CC61" "0: The input pin for CC61_0,1: The input pin for CC61_1,?,?"
bitfld.word 0x0 0.--1. "ISCC60,Input select for CC60" "0: The input pin for CC60_0,1: The input pin for CC60_1,?,?"
group.word 0x74++0x1
line.word 0x0 "PISEL2,Port input select 2 register"
bitfld.word 0x0 7. "T13EXT,Extension for T13HR inputs" "0: T13HR[D:A] one of the signals T13HR[D:A] is..,1: T13HR[H:E] one of the signals T13HR[H:E] is.."
bitfld.word 0x0 6. "T12EXT,Extension for T12HR inputs" "0: T12HR[D:A] one of the signals T12HR[D:A] is..,1: T12HR[H:E] one of the signals T12HR[H:E] is.."
newline
bitfld.word 0x0 4.--5. "ISCNT13,Input select for T13 counting input" "0: The T13 prescaler generates the counting events.,1: Bit TCTR4.T13CNT written with 1 is a counting..,2: The timer T13 is counting each rising edge..,3: The timer T13 is counting each falling edge.."
bitfld.word 0x0 2.--3. "ISCNT12,Input select for T12 counting input" "0: The T12 prescaler generates the counting events.,1: Bit TCTR4.T12CNT written with 1 is a counting..,2: The timer T12 is counting each rising edge..,3: The timer T12 is counting each falling edge.."
newline
bitfld.word 0x0 0.--1. "IST13HR,Input select for T13HR" "0: Either signal T13HRA (if T13EXT = 0) or T13HRE..,1: Either signal T13HRB (if T13EXT = 0) or T13HRF..,2: Either signal T13HRC (if T13EXT = 0) or T13HRG..,3: Either signal T13HRD (if T13EXT = 0) or T13HRH.."
group.word 0x50++0x1
line.word 0x0 "PSLR,Passive state level register"
bitfld.word 0x0 7. "PSL63,Passive state level of output COUT63" "0: The passive level is 0,1: The passive level is 1"
hexmask.word.byte 0x0 0.--5. 1. "PSL,Compare outputs passive state level"
group.word 0x78++0x1
line.word 0x0 "T12,Timer T12 counter register"
hexmask.word 0x0 0.--15. 1. "T12CV,Timer T12 counter value"
group.word 0x2C++0x1
line.word 0x0 "T12DTC,Dead-time control register for timer T12 low register"
rbitfld.word 0x0 14. "DTR2,Dead-time run indication bit 2" "0: The value of the corresponding dead-time counter..,1: The value of the corresponding dead-time counter.."
rbitfld.word 0x0 13. "DTR1,Dead-time run indication bit 1" "0: The value of the corresponding dead-time counter..,1: The value of the corresponding dead-time counter.."
newline
rbitfld.word 0x0 12. "DTR0,Dead-time run indication bit 0" "0: The value of the corresponding dead-time counter..,1: The value of the corresponding dead-time counter.."
bitfld.word 0x0 10. "DTE2,Dead-time enable bit 2" "0: Dead-time generation is disabled. The..,1: Dead-time generation is enabled. The.."
newline
bitfld.word 0x0 9. "DTE1,Dead-time enable bit 1" "0: Dead-time generation is disabled. The..,1: Dead-time generation is enabled. The.."
bitfld.word 0x0 8. "DTE0,Dead-time enable bit 0" "0: Dead-time generation is disabled. The..,1: Dead-time generation is enabled. The.."
newline
hexmask.word.byte 0x0 0.--7. 1. "DTM,Dead-time"
group.word 0x40++0x1
line.word 0x0 "T12MSEL,T12 capture/compare mode select register"
bitfld.word 0x0 15. "DBYP,Delay bypass" "0: The delay bypass is not active. The dead-time..,1: The delay bypass is active. The dead-time.."
bitfld.word 0x0 12.--14. "HSYNC,Hall synchronization" "0: Any edge at one of the inputs CCPOSx (x = 0 1 2)..,1: A T13 compare-match triggers the sampling,2: A T13 period-match triggers the sampling,3: The Hall sampling triggered by hardware sources..,4: A T12 period-match (while counting up) triggers..,5: A T12 one-match (while counting down) triggers..,6: A T12 compare-match of channel 0 (while counting..,7: A T12 compare-match of channel 0 (while counting.."
newline
hexmask.word.byte 0x0 8.--11. 1. "MSEL62,Capture/compare mode selection"
hexmask.word.byte 0x0 4.--7. 1. "MSEL61,Capture/compare mode selection"
newline
hexmask.word.byte 0x0 0.--3. 1. "MSEL60,Capture/compare mode selection"
group.word 0x24++0x1
line.word 0x0 "T12PR,Timer T12 period register"
hexmask.word 0x0 0.--15. 1. "T12PV,T12 period value"
group.word 0x7C++0x1
line.word 0x0 "T13,Timer T13 counter register"
hexmask.word 0x0 0.--15. 1. "T13CV,Timer T13 counter value"
group.word 0x28++0x1
line.word 0x0 "T13PR,Timer T13 period register"
hexmask.word 0x0 0.--15. 1. "T13PV,T13 period value"
group.word 0x30++0x1
line.word 0x0 "TCTR0,Timer control 0 register"
rbitfld.word 0x0 13. "STE13,Timer T13 shadow transfer enable" "0: The shadow register transfer is disabled,1: The shadow register transfer is enabled"
rbitfld.word 0x0 12. "T13R,Timer T13 run bit" "0: Timer T13 is stopped,1: Timer T13 is running"
newline
bitfld.word 0x0 11. "T13PRE,Timer T13 prescaler bit" "0: The additional prescaler for T13 is disabled,1: The additional prescaler for T13 is enabled"
bitfld.word 0x0 8.--10. "T13CLK,Timer T13 input clock Select" "0: fT13 = fCCU,1: fT13 = fCCU / 2,2: fT13 = fCCU / 4,3: fT13 = fCCU / 8,4: fT13 = fCCU / 16,5: fT13 = fCCU/ 32,6: fT13 = fCCU / 64,7: fT13 = fCCU / 128"
newline
bitfld.word 0x0 7. "CTM,T12 operating mode" "0: T12 always counts up and continues counting from..,1: T12 counts down after detecting a period-match.."
rbitfld.word 0x0 6. "CDIR,Count direction of timer T12" "0: T12 counts up,1: T12 counts down"
newline
rbitfld.word 0x0 5. "STE12,Timer T12 shadow transfer enable" "0: The shadow register transfer is disabled,1: The shadow register transfer is enabled"
rbitfld.word 0x0 4. "T12R,Timer T12 run bit" "0: Timer T12 is stopped,1: Timer T12 is running"
newline
bitfld.word 0x0 3. "T12PRE,Timer T12 prescaler bit" "0: The additional prescaler for T12 is disabled,1: The additional prescaler for T12 is enabled"
bitfld.word 0x0 0.--2. "T12CLK,Timer T12 input clock select" "0: fT12 = fCCU,1: fT12 = fCCU / 2,2: fT12 = fCCU / 4,3: fT12 = fCCU / 8,4: fT12 = fCCU / 16,5: fT12 = fCCU / 32,6: fT12 = fCCU / 64,7: fT12 = fCCU / 128"
group.word 0x58++0x1
line.word 0x0 "TCTR2,Timer control 2 register"
bitfld.word 0x0 10.--11. "T13RSEL,Timer T13 external run selection" "0: The external setting of T13R is disabled,1: Bit T13R is set if a rising edge of signal T13HR..,2: Bit T13R is set if a falling edge of signal..,3: Bit T13R is set if an edge of signal T13HR is.."
bitfld.word 0x0 8.--9. "T12RSEL,Timer T12 external run selection" "0: The external setting of T12R is disabled,1: Bit T12R is set if a rising edge of signal T12HR..,2: Bit T12R is set if a falling edge of signal..,3: Bit T12R is set if an edge of signal T12HR is.."
newline
bitfld.word 0x0 5.--6. "T13TED,Timer T13 trigger event direction" "0: No action,1: While T12 is counting up,2: While T12 is counting down,3: Independent on the count direction of T12"
bitfld.word 0x0 2.--4. "T13TEC,T13 trigger event control" "0: No action,1: Set T13R on a T12 compare event on channel 0,2: Set T13R on a T12 compare event on channel 1,3: Set T13R on a T12 compare event on channel 2,4: Set T13R on any T12 compare event on the..,5: Set T13R upon a period-match of T12,6: Set T13R upon a zero-match of T12 (while..,7: Set T13R on any edge of inputs CCPOSx"
newline
bitfld.word 0x0 1. "T13SSC,Timer T13 single shot control" "0: No hardware action on T13R,1: The single-shot mode is enabled the bit T13R is.."
bitfld.word 0x0 0. "T12SSC,Timer T12 single shot control" "0: The single-shot mode is disabled no hardware..,1: The single shot mode is enabled the bit T12R is.."
wgroup.word 0x4++0x1
line.word 0x0 "TCTR4,Timer control 4 register"
bitfld.word 0x0 15. "T13STD,Timer T13 shadow transfer disable" "0: No action,1: STE13 is reset without triggering the shadow.."
bitfld.word 0x0 14. "T13STR,Timer T13 shadow transfer request" "0: No action,1: STE13 is set enabling the shadow transfer"
newline
bitfld.word 0x0 13. "T13CNT,Timer T13 count event" "0: No action,1: If enabled (PISEL2) timer T13 counts one step"
bitfld.word 0x0 10. "T13RES,Timer T13 reset" "0: No effect on T13,1: The T13 counter register is reset to zero. The.."
newline
bitfld.word 0x0 9. "T13RS,Timer T13 run set" "0: T13R is not influenced,1: T13R is set T13 counts"
bitfld.word 0x0 8. "T13RR,Timer T13 run reset" "0: T13R is not influenced,1: T13R is cleared T13 stops counting"
newline
bitfld.word 0x0 7. "T12STD,Timer T12 shadow transfer disable" "0: No action,1: STE12 is reset without triggering the shadow.."
bitfld.word 0x0 6. "T12STR,Timer T12 shadow transfer request" "0: No action,1: STE12 is set enabling the shadow transfer"
newline
bitfld.word 0x0 5. "T12CNT,Timer T12 count event" "0: No action,1: If enabled (PISEL2) timer T12 counts one step"
bitfld.word 0x0 3. "DTRES,Dead-time counter reset" "0: No effect on the dead-time counters,1: The three dead-time counter channels are reset.."
newline
bitfld.word 0x0 2. "T12RES,Timer T12 reset" "0: No effect on T12,1: The T12 counter register is reset to zero. The.."
bitfld.word 0x0 1. "T12RS,Timer T12 run set" "0: T12R is not influenced,1: T12R is set T12 counts"
newline
bitfld.word 0x0 0. "T12RR,Timer T12 run reset" "0: T12R is not influenced,1: T12R is cleared T12 stops counting"
group.word 0x60++0x1
line.word 0x0 "TRPCTR,Trap control register"
bitfld.word 0x0 15. "TRPPEN,Trap pin enable" "0: The trap functionality based on the input pin..,1: The trap functionality based on the input pin.."
bitfld.word 0x0 14. "TRPEN13,Trap enable control for timer T13" "0: The trap functionality for T13 is disabled;..,1: The trap functionality for T13 is enabled; the.."
newline
hexmask.word.byte 0x0 8.--13. 1. "TRPEN,Trap enable control"
bitfld.word 0x0 2. "TRPM2,Trap mode control bit 2" "0: Hardware_reset,1: Software_reset"
newline
bitfld.word 0x0 0.--1. "TRPM10,Trap mode control bits 1  0" "0: The trap state is left (return to normal..,1: The trap state is left (return to normal..,?,3: The trap state is left (return to normal.."
tree.end
tree "CPU (CPU Processor)"
base ad:0xE000E000
group.long 0xD0C++0x3
line.long 0x0 "AIRCR,Application interrupt/reset control register"
hexmask.long.word 0x0 16.--31. 1. "VECTKEY,Vector key"
rbitfld.long 0x0 15. "ENDIANNESS,Data endianness" "0: Little endian,1: Big endian"
newline
bitfld.long 0x0 2. "SYSRESETREQ,System reset request" "0: No effect,1: Request a system level reset"
bitfld.long 0x0 1. "VECTCLRACTIVE,VECTCLRACTIVE" "0,1"
rgroup.long 0xD14++0x3
line.long 0x0 "CCR,Configuration control register"
bitfld.long 0x0 9. "STKALIGN,STKALIGN" "0,1"
bitfld.long 0x0 3. "UNALIGN_TRP,UNALIGN_TRP" "0,1"
rgroup.long 0xD00++0x3
line.long 0x0 "CPUID,CPU ID base register"
hexmask.long.byte 0x0 24.--31. 1. "IMPLEMENTER,Implementer code"
hexmask.long.byte 0x0 20.--23. 1. "VARIANT,Variant number"
newline
hexmask.long.byte 0x0 16.--19. 1. "CONSTANT,Constant"
hexmask.long.word 0x0 4.--15. 1. "PARTNO,Part number"
newline
hexmask.long.byte 0x0 0.--3. 1. "REVISION,Revision number"
group.long 0xD04++0x3
line.long 0x0 "ICSR,Interrupt control and state register"
bitfld.long 0x0 31. "NMIPENDSET,NMI set pending" "0: On writes has no effect. On reads NMI exception..,1: On writes changes the NMI exception state to.."
bitfld.long 0x0 28. "PENDSVSET,PendSV set pending" "0: On writes has no effect. On reads PendSV..,1: On writes changes PendSV exception state to.."
newline
bitfld.long 0x0 27. "PENDSVCLR,PendSV clear pending" "0: No effect,1: Remove pending state from the PENDSV exception"
bitfld.long 0x0 26. "PENDSTSET,SysTick exception set pending" "0: On writes has no effect. On reads SysTick..,1: On writes changes SysTick exception state to.."
newline
bitfld.long 0x0 25. "PENDSTCLR,SysTick exception clear pending" "0: No effect,1: Removes the pending state from the SysTick.."
rbitfld.long 0x0 22. "ISRPENDING,Interrupt pending flag" "0: Interrupt not pending,1: Interrupt is pending"
newline
hexmask.long.byte 0x0 12.--17. 1. "VECTPENDING,VECTPENDING"
hexmask.long.byte 0x0 0.--5. 1. "VECTACTIVE,VECTACTIVATE"
group.long 0x180++0x3
line.long 0x0 "NVIC_ICER,Interrupt clear-enable register"
bitfld.long 0x0 23. "Int_PORT2,Interrupt Clear for PORT2" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 22. "Int_MON,Interrupt clear for MON" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 21. "Int_DU,Interrupt clear for differential unit" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 20. "Int_HS2,Interrupt clear for HS2" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 19. "Int_HS1,Interrupt clear for HS1" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 18. "Int_LS2,Interrupt clear for LS2" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 17. "Int_LS1,Interrupt clear for LS1" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 14. "Int_WAKEUP,Interrupt clear for WAKEUP" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 13. "Int_EXINT1,Interrupt clear for external Int 1" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 12. "Int_EXINT0,Interrupt clear for external Int 0" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 11. "Int_UART2,Interrupt clear for UART2" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 10. "Int_UART1,Interrupt clear for UART1" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 9. "Int_SSC2,Interrupt clear for SSC2" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 8. "Int_SSC1,Interrupt clear for SSC1" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 7. "Int_CCU6SR3,Interrupt clear for CCU6 SR3" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 6. "Int_CCU6SR2,Interrupt clear for CCU6 SR2" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 5. "Int_CCU6SR1,Interrupt clear for CCU6 SR1" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 4. "Int_CCU6SR0,Interrupt clear for CCU6 SR0" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 3. "Int_ADC1,Interrupt clear for ADC1" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 2. "Int_ADC2,Interrupt clear for MU  ADC2" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
newline
bitfld.long 0x0 1. "Int_GPT2,Interrupt clear for GPT2" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
bitfld.long 0x0 0. "Int_GPT1,Interrupt clear for GPT1" "0: On reads the associated interrupt is disabled no..,1: On reads the associated interrupt is enabled on.."
group.long 0x280++0x3
line.long 0x0 "NVIC_ICPR,Interrupt clear-pending register"
bitfld.long 0x0 23. "Int_PORT2,Interrupt clear pending for PORT2" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 22. "Int_MON,Interrupt clear pending for MON" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 21. "Int_DU,Interrupt clear pending for differential unit" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 20. "Int_HS2,Interrupt clear pending for HS2" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 19. "Int_HS1,Interrupt clear pending for HS1" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 18. "Int_LS2,Interrupt clear pending for LS2" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 17. "Int_LS1,Interrupt clear pending for LS1" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 14. "Int_WAKEUP,Interrupt clear pending for WAKEUP" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 13. "Int_EXINT1,Interrupt clear pending for external Int 1" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 12. "Int_EXINT0,Interrupt clear pending for external Int 0" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 11. "Int_UART2,Interrupt clear pending for UART2" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 10. "Int_UART1,Interrupt clear pending for UART1" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 9. "Int_SSC2,Interrupt clear pending for SSC2" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 8. "Int_SSC1,Interrupt clear pending for SSC1" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 7. "Int_CCU6SR3,Interrupt clear pending for CCU6 SR3" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 6. "Int_CCU6SR2,Interrupt clear pending for CCU6 SR2" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 5. "Int_CCU6SR1,Interrupt clear pending for CCU6 SR1" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 4. "Int_CCU6SR0,Interrupt clear pending for CCU6 SR0" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 3. "Int_ADC1,Interrupt clear pending for ADC1" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 2. "Int_ADC2,Interrupt clear pending for MU  ADC2" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
newline
bitfld.long 0x0 1. "Int_GPT2,Interrupt clear pending for GPT2" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
bitfld.long 0x0 0. "Int_GPT1,Interrupt clear pending for GPT1" "0: On reads the associated interrupt is not pending..,1: On reads the associated interrupt is pending on.."
group.long 0x400++0x17
line.long 0x0 "NVIC_IPR0,Interrupt priority 0 register"
bitfld.long 0x0 30.--31. "PRI_ADC1,Priority for ADC1" "0,1,2,3"
bitfld.long 0x0 22.--23. "PRI_ADC2,Priority for MU  ADC2" "0,1,2,3"
newline
bitfld.long 0x0 14.--15. "PRI_GPT2,Priority for GPT2" "0,1,2,3"
bitfld.long 0x0 6.--7. "PRI_GPT1,Priority for GPT1" "0,1,2,3"
line.long 0x4 "NVIC_IPR1,Interrupt priority 1 register"
bitfld.long 0x4 30.--31. "PRI_CCU6SR3,Priority for CCU6 SR3" "0,1,2,3"
bitfld.long 0x4 22.--23. "PRI_CCU6SR2,Priority for CCU6 SR2" "0,1,2,3"
newline
bitfld.long 0x4 14.--15. "PRI_CCU6SR1,Priority for CCU6 SR1" "0,1,2,3"
bitfld.long 0x4 6.--7. "PRI_CCU6SR0,Priority for CCU6 SR0" "0,1,2,3"
line.long 0x8 "NVIC_IPR2,Interrupt priority 2 register"
bitfld.long 0x8 30.--31. "PRI_UART2,Priority for CCU6 UART2" "0,1,2,3"
bitfld.long 0x8 22.--23. "PRI_UART1,Priority for CCU6 UART1" "0,1,2,3"
newline
bitfld.long 0x8 14.--15. "PRI_SSC2,Priority for CCU6 SSC2" "0,1,2,3"
bitfld.long 0x8 6.--7. "PRI_SSC1,Priority for CCU6 SSC1" "0,1,2,3"
line.long 0xC "NVIC_IPR3,Interrupt priority 3 register"
bitfld.long 0xC 22.--23. "PRI_WAKEUP,Priority for WAKEUP" "0,1,2,3"
bitfld.long 0xC 14.--15. "PRI_EXINT1,Priority for external Int 1" "0,1,2,3"
newline
bitfld.long 0xC 6.--7. "PRI_EXINT0,Priority for external Int 0" "0,1,2,3"
line.long 0x10 "NVIC_IPR4,Interrupt priority 4 register"
bitfld.long 0x10 30.--31. "PRI_HS1,Priority for HS1" "0,1,2,3"
bitfld.long 0x10 22.--23. "PRI_LS2,Priority for LS2" "0,1,2,3"
newline
bitfld.long 0x10 14.--15. "PRI_LS1,Priority for LS1" "0,1,2,3"
line.long 0x14 "NVIC_IPR5,Interrupt priority 5 register"
bitfld.long 0x14 30.--31. "PRI_PORT2,Priority for PORT2" "0,1,2,3"
bitfld.long 0x14 22.--23. "PRI_MON,Priority for MON" "0,1,2,3"
newline
bitfld.long 0x14 14.--15. "PRI_DU,Priority for differential unit" "0,1,2,3"
bitfld.long 0x14 6.--7. "PRI_HS2,Priority for HS2" "0,1,2,3"
group.long 0x100++0x3
line.long 0x0 "NVIC_ISER,Interrupt set-enable register"
bitfld.long 0x0 23. "Int_PORT2,Interrupt set for PORT2" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 22. "Int_MON,Interrupt set for MON" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 21. "Int_DU,Interrupt set for differential unit" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 20. "Int_HS2,Interrupt set for HS2" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 19. "Int_HS1,Interrupt set for HS1" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 18. "Int_LS2,Interrupt set for LS2" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 17. "Int_LS1,Interrupt set for LS1" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 14. "Int_WAKEUP,Interrupt set for WAKEUP" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 13. "Int_EXINT1,Interrupt set for external Int 1" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 12. "Int_EXINT0,Interrupt set for external Int 0" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 11. "Int_UART2,Interrupt set for UART2" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 10. "Int_UART1,Interrupt set for UART1" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 9. "Int_SSC2,Interrupt set for SSC2" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 8. "Int_SSC1,Interrupt set for SSC1" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 7. "Int_CCU6SR3,Interrupt set for CCU6 SR3" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 6. "Int_CCU6SR2,Interrupt set for CCU6 SR2" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 5. "Int_CCU6SR1,Interrupt set for CCU6 SR1" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 4. "Int_CCU6SR0,Interrupt set for CCU6 SR0" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 3. "Int_ADC1,Interrupt set for ADC1" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 2. "Int_ADC2,Interrupt set for MU  ADC2" "0: No effect on write,1: Enables the associated interrupt"
newline
bitfld.long 0x0 1. "Int_GPT2,Interrupt set for GPT2" "0: No effect on write,1: Enables the associated interrupt"
bitfld.long 0x0 0. "Int_GPT1,Interrupt set for GPT1" "0: No effect on write,1: Enables the associated interrupt"
group.long 0x200++0x3
line.long 0x0 "NVIC_ISPR,Interrupt set-pending register"
bitfld.long 0x0 23. "Int_PORT2,Interrupt set pending for PORT2" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 22. "Int_MON,Interrupt set pending for MON" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 21. "Int_DU,Interrupt set pending for differential unit" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 20. "Int_HS2,Interrupt set pending for HS2" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 19. "Int_HS1,Interrupt set pending for HS1" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 18. "Int_LS2,Interrupt set pending for LS2" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 17. "Int_LS1,Interrupt set pending for LS1" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 14. "Int_WAKEUP,Interrupt set pending for WAKEUP" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 13. "Int_EXINT1,Interrupt set pending for external Int 1" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 12. "Int_EXINT0,Interrupt set pending for external Int 0" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 11. "Int_UART2,Interrupt set pending for UART2" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 10. "Int_UART1,Interrupt set pending for UART1" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 9. "Int_SSC2,Interrupt set pending for SSC2" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 8. "Int_SSC1,Interrupt set pending for SSC1" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 7. "Int_CCU6SR3,Interrupt set pending for CCU6 SR3" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 6. "Int_CCU6SR2,Interrupt set pending for CCU6 SR2" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 5. "Int_CCU6SR1,Interrupt set pending for CCU6 SR1" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 4. "Int_CCU6SR0,Interrupt set pending for CCU6 SR0" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 3. "Int_ADC1,Interrupt set pending for ADC1" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 2. "Int_ADC2,Interrupt set pending for MU  ADC2" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
newline
bitfld.long 0x0 1. "Int_GPT2,Interrupt set pending for GPT2" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
bitfld.long 0x0 0. "Int_GPT1,Interrupt set pending for GPT1" "0: On reads the associated interrupt is not pending..,1: The associated interrupt is pending"
group.long 0xD10++0x3
line.long 0x0 "SCR,System control register"
bitfld.long 0x0 4. "SEVONPEND,Send event on pending bit" "0: Only enabled interrupts or events can wake-up..,1: Enabled events and all interrupts including.."
bitfld.long 0x0 2. "SLEEPDEEP,Sleep deep" "0: Sleep,1: Deep sleep"
newline
bitfld.long 0x0 1. "SLEEPONEXIT,Sleep on exit" "0: Do not sleep when returning to Thread mode,1: Enter sleep or deep sleep on return from an ISR.."
group.long 0xD1C++0x7
line.long 0x0 "SHPR2,System handler priority 2 register"
bitfld.long 0x0 30.--31. "PRI_11,Priority of system handler 11  SVCall" "0,1,2,3"
line.long 0x4 "SHPR3,System handler priority 3 register"
bitfld.long 0x4 30.--31. "PRI_15,Priority of system handler 15  SysTick" "0,1,2,3"
bitfld.long 0x4 22.--23. "PRI_14,Priority of system handler 14  PendSV" "0,1,2,3"
rgroup.long 0x1C++0x3
line.long 0x0 "SYSTICK_CALIB,SysTick calibration value register"
bitfld.long 0x0 31. "NOREF,No reference clock" "0,1"
bitfld.long 0x0 30. "SKEW,Skew" "0,1"
newline
hexmask.long.tbyte 0x0 0.--23. 1. "TENMS,Tenms"
group.long 0x10++0x3
line.long 0x0 "SYSTICK_CSR,SysTick control and status register"
rbitfld.long 0x0 16. "COUNTFLAG,Count flag" "0,1"
bitfld.long 0x0 2. "CLKSOURCE,CLK source" "0: External reference clock (from fSYS/4),1: Core clock (from fSYS)"
newline
bitfld.long 0x0 1. "TICKINT,TICKINT" "0: Counting down to 0 does not assert the SysTick..,1: Counting down to 0 asserts the SysTick exception.."
bitfld.long 0x0 0. "ENABLE,Enable" "0: Counter disabled,1: Counter enabled"
group.long 0x18++0x3
line.long 0x0 "SYSTICK_CVR,SysTick current value register"
hexmask.long.tbyte 0x0 0.--23. 1. "CURRENT,Current"
group.long 0x14++0x3
line.long 0x0 "SYSTICK_RVR,SysTick reload value register"
hexmask.long.tbyte 0x0 0.--23. 1. "RELOAD,Reload"
tree.end
tree "GPT12E (General Purpose Timer 12)"
base ad:0x40010000
group.long 0x1C++0x3
line.long 0x0 "CAPREL,Capture/reload register"
hexmask.long.word 0x0 0.--15. 1. "CAPREL,Current reload value or captured value"
rgroup.long 0x0++0x3
line.long 0x0 "ID,Module identification register"
hexmask.long.byte 0x0 8.--15. 1. "MOD_TYPE,Module identification number"
hexmask.long.byte 0x0 0.--7. 1. "MOD_REV,Module revision number"
group.long 0x4++0x3
line.long 0x0 "PISEL,Port input select register"
bitfld.long 0x0 14.--15. "ISCAPIN,Input select for CAPIN" "0: Signal CAPINA is selected,1: Signal CAPINB is selected,2: Signal CAPINC (read trigger from T3) is selected,3: Signal CAPIND (read trigger from T2 or T3 or T4).."
bitfld.long 0x0 13. "IST6EUD,Input select for T6EUD" "0: Signal T6EUDA is selected,1: Signal T6EUDB is selected"
newline
bitfld.long 0x0 12. "IST6IN,Input select for T6IN" "0: Signal T6INA is selected,1: Signal T6INB is selected"
bitfld.long 0x0 11. "IST5EUD,Input select for T5EUD" "0: Signal T5EUDA is selected,1: Signal T5EUDB is selected"
newline
bitfld.long 0x0 10. "IST5IN,Input select for T5IN" "0: Signal T5INA is selected,1: Signal T5INB is selected"
bitfld.long 0x0 8.--9. "IST4EUD,Input select for TEUD" "0: Signal T4EUDA is selected,1: Signal T4EUDB is selected,2: Signal T4EUDC is selected,3: Signal T4EUDD is selected"
newline
bitfld.long 0x0 6.--7. "IST4IN,Input select for T4IN" "0: Signal T4INA is selected,1: Signal T4INB is selected,2: Signal T4INC is selected,3: Signal T4IND is selected"
bitfld.long 0x0 4.--5. "IST3EUD,Input select for T3EUD" "0: Signal T3EUDA is selected,1: Signal T3EUDB is selected,2: Signal T3EUDC is selected,3: Signal T3EUDD is selected"
newline
bitfld.long 0x0 2.--3. "IST3IN,Input select for T3IN" "0: Signal T3INA is selected,1: Signal T3INB is selected,2: Signal T3INC is selected,3: Signal T3IND is selected"
bitfld.long 0x0 1. "IST2EUD,Input select for T2EUD" "0: Signal T2EUDA is selected,1: Signal T2EUDB is selected"
newline
bitfld.long 0x0 0. "IST2IN,Input select for T2IN" "0: Signal T2INA is selected,1: Signal T2INB is selected"
group.long 0x20++0x3
line.long 0x0 "T2,Timer T2 count register"
hexmask.long.word 0x0 0.--15. 1. "T2,Timer T2 current value"
group.long 0x8++0x3
line.long 0x0 "T2CON,Timer T2 control register"
rbitfld.long 0x0 15. "T2DIR,Timer T2 rotation direction" "0: Timer T2 counts up,1: Timer T2 counts down"
bitfld.long 0x0 14. "T2CHDIR,Timer T2 count direction change" "0: No change of count direction was detected,1: A change of count direction was detected"
newline
bitfld.long 0x0 13. "T2EDGE,Timer T2 edge detection" "0: No count edge was detected,1: A count edge was detected"
bitfld.long 0x0 12. "T2IRIDIS,Timer T2 interrupt disable" "0: Interrupt generation for T2CHDIR and T2EDGE..,1: Interrupt generation for T2CHDIR and T2EDGE.."
newline
bitfld.long 0x0 9. "T2RC,Timer T2 remote control" "0: Timer T2 is controlled by its own run bit T2R,1: Timer T2 is controlled by the run bit T3R of.."
bitfld.long 0x0 8. "T2UDE,Timer T2 external up/down enable" "0: Count direction is controlled by bit T2UD; input..,1: Count direction is controlled by input T2EUD"
newline
bitfld.long 0x0 7. "T2UD,Timer T2 up/down control" "0: Timer T2 counts up,1: Timer T2 counts down"
bitfld.long 0x0 6. "T2R,Timer T2 input run bit" "0: Timer T2 stops,1: Timer T2 runs"
newline
bitfld.long 0x0 3.--5. "T2M,Timer T2 input mode control" "0: Timer mode,1: Counter mode,2: Gated timer mode with gate active low,3: Gated timer mode with gate active high,4: Reload mode,5: Capture mode,6: Rotation detection mode,7: Edge detection mode"
bitfld.long 0x0 0.--2. "T2I,Timer T2 input parameter selection" "0,1,2,3,4,5,6,7"
group.long 0x24++0x3
line.long 0x0 "T3,Timer T3 count register"
hexmask.long.word 0x0 0.--15. 1. "T3,Timer T3 current value"
group.long 0xC++0x3
line.long 0x0 "T3CON,Timer T3 control register"
rbitfld.long 0x0 15. "T3DIR,Timer T3 rotation direction flag" "0: Timer T3 counts up,1: Timer T3 counts down"
bitfld.long 0x0 14. "T3CHDIR,Timer T3 count direction change flag" "0: No change of count direction was detected,1: A change of count direction was detected"
newline
bitfld.long 0x0 13. "T3EDGE,Timer T3 edge detection flag" "0: No count edge was detected,1: A count edge was detected"
bitfld.long 0x0 11.--12. "BPS1,GPT1 block prescaler control" "0: fGPT/8,1: fGPT/4,2: fGPT/32,3: fGPT/16"
newline
bitfld.long 0x0 10. "T3OTL,Timer T3 overflow toggle latch" "0,1"
bitfld.long 0x0 9. "T3OE,Overflow/underflow output enable" "0: Alternate output function disabled,1: State of T3 toggle latch is output on pin T3OUT"
newline
bitfld.long 0x0 8. "T3UDE,Timer T3 external up/down enable" "0: Count direction is controlled by bit T3UD; input..,1: Count direction is controlled by input T3EUD"
bitfld.long 0x0 7. "T3UD,Timer T3 up/down control" "0: Timer T3 counts up,1: Timer T3 counts down"
newline
bitfld.long 0x0 6. "T3R,Timer T3 input run bit" "0: Timer T3 stops,1: Timer T3 runs"
bitfld.long 0x0 3.--5. "T3M,Timer T3 input mode control" "0: Timer mode,1: Counter mode,2: Gated timer mode with gate active low,3: Gated timer mode with gate active high,?,?,6: Rotation detection mode,7: Edge detection mode"
newline
bitfld.long 0x0 0.--2. "T3I,Timer T3 input parameter selection" "0,1,2,3,4,5,6,7"
group.long 0x28++0x3
line.long 0x0 "T4,Timer T4 count register"
hexmask.long.word 0x0 0.--15. 1. "T4,Timer T4 current value"
group.long 0x10++0x3
line.long 0x0 "T4CON,Timer T4 control register"
rbitfld.long 0x0 15. "T4RDIR,Timer T4 rotation direction" "0: Timer T4 counts up,1: Timer T4 counts down"
bitfld.long 0x0 14. "T4CHDIR,Timer T4 count direction change" "0: No change in count direction was detected,1: A change in count direction was detected"
newline
bitfld.long 0x0 13. "T4EDGE,Timer T4 edge direction" "0: No count edge was detected,1: A count edge was detected"
bitfld.long 0x0 12. "T4IRDIS,Timer T4 interrupt disable" "0: Interrupt generation for T4CHDIR and T4EDGE..,1: Interrupt generation for T4CHDIR and T4EDGE.."
newline
bitfld.long 0x0 11. "CLRT3EN,Clear timer T3 enable" "0: No effect of T4IN on timer T3,1: A falling edge on T4In clears timer T3"
bitfld.long 0x0 10. "CLRT2EN,Clear timer T2 enable" "0: No effect of T4EUD on timer T2,1: A falling edge on T4EUD clears timer T2"
newline
bitfld.long 0x0 9. "T4RC,Timer T4 remote control" "0: Timer T4 is controlled by its own run bit T4R,1: Timer T4 is controlled by the run bit T3R of.."
bitfld.long 0x0 8. "T4UDE,Timer T4 external up/down enable" "0: Count direction is controlled by bit T4UD; input..,1: Count direction is controlled by input T4EUD"
newline
bitfld.long 0x0 7. "T4UD,Timer T4 up/down control" "0: Timer T4 counts up,1: Timer T4 counts down"
bitfld.long 0x0 6. "T4R,Timer T4 input run bit" "0: Timer T4 stops,1: Timer T4 runs"
newline
bitfld.long 0x0 3.--5. "T4M,Timer T4 mode control (basic operating mode)" "0: Timer mode,1: Counter mode,2: Gated timer mode with gate active low,3: Gated timer mode with gate active high,4: Reload mode,5: Capture mode,6: Rotation detection mode,7: Edge detection mode"
bitfld.long 0x0 0.--2. "T4I,Timer T4 input parameter selection" "0,1,2,3,4,5,6,7"
group.long 0x2C++0x3
line.long 0x0 "T5,Timer 5 count register"
hexmask.long.word 0x0 0.--15. 1. "T5,Timer T5 current value"
group.long 0x14++0x3
line.long 0x0 "T5CON,Timer T5 control register"
bitfld.long 0x0 15. "T5SC,Timer T5 capture mode enable" "0: Capture into register CAPREL disabled,1: Capture into register CAPREL enabled"
bitfld.long 0x0 14. "T5CLR,Timer T5 clear enable bit" "0: Timer T5 is not cleared on a capture event,1: Timer T5 is cleared on a capture event"
newline
bitfld.long 0x0 12.--13. "CI,Register CAPREL capture trigger selection" "0: Capture disabled,1: Positive transition (rising edge) on CAPIN,2: Negative transition (falling edge) on CAPIN or..,3: Any transition (rising or falling edge) on CAPIN.."
bitfld.long 0x0 10. "CT3,Timer T3 capture trigger enable" "0: Capture trigger from input line CAPIN,1: Capture trigger from T3 input lines T3IN and/or.."
newline
bitfld.long 0x0 9. "T5RC,Timer T5 remote control" "0: Timer T5 is controlled by its own run bit T5R,1: Timer T5 is controlled by the run bit T6R of.."
bitfld.long 0x0 8. "T5UDE,Timer T5 external up/down enable" "0: Count direction is controlled by bit T5UD; input..,1: Count direction is controlled by input T5EUD"
newline
bitfld.long 0x0 7. "T5UD,Timer T5 up/down control" "0: Timer T5 counts up,1: Timer T5 counts down"
bitfld.long 0x0 6. "T5R,Timer T5 run bit" "0: Timer T5 stops,1: Timer T5 runs"
newline
bitfld.long 0x0 3.--4. "T5M,Timer T5 input mode control" "0: Timer mode,1: Counter mode,2: Gated timer mode with gate active low,3: Gated timer mode with gate active high"
bitfld.long 0x0 0.--2. "T5I,Timer T5 input parameter selection" "0,1,2,3,4,5,6,7"
group.long 0x30++0x3
line.long 0x0 "T6,Timer 6 count register"
hexmask.long.word 0x0 0.--15. 1. "T6,Timer T6 current value"
group.long 0x18++0x3
line.long 0x0 "T6CON,Timer T6 control register"
bitfld.long 0x0 15. "T6SR,Timer T6 reload mode enable" "0: Reload from register CAPREL disabled,1: Reload from register CAPREL enabled"
bitfld.long 0x0 14. "T6CLR,Timer T6 clear enable bit" "0: Timer T6 is not cleared on a capture event,1: Timer T6 is cleared on a capture event"
newline
bitfld.long 0x0 11.--12. "BPS2,GPT2 block prescaler control" "0: fGPT/4,1: fGPT/2,2: fGPT/16,3: fGPT/8"
bitfld.long 0x0 10. "T6OTL,Timer T6 overflow toggle latch" "0,1"
newline
bitfld.long 0x0 9. "T6OE,Overflow/underflow output enable" "0: Alternate output function disabled,1: State of T6 toggle latch is output on pin T6OUT"
bitfld.long 0x0 8. "T6UDE,Timer T6 external up/down enable" "0: Count direction is controlled by bit T6UD; input..,1: Count direction is controlled by input T6EUD"
newline
bitfld.long 0x0 7. "T6UD,Timer T6 up/down control" "0: Timer T3 counts up,1: Timer T3 counts down"
bitfld.long 0x0 6. "T6R,Timer T6 input run bit" "0: Timer T3 stops,1: Timer T3 runs"
newline
bitfld.long 0x0 3.--5. "T6M,Timer T6 mode control" "0: Timer mode,1: Counter mode,2: Gated timer mode with gate active low,3: Gated timer mode with gate active high,?,?,?,?"
bitfld.long 0x0 0.--2. "T6I,Timer T6 input parameter selection" "0,1,2,3,4,5,6,7"
tree.end
tree "HS (High-Side Switch)"
base ad:0x40024000
group.long 0x4++0x3
line.long 0x0 "CTRL,High-side driver control register"
bitfld.long 0x0 28.--29. "HS2_OC_SEL,High side 2 overcurrent threshold selection" "0: 25 mA min.,1: 50 mA min.,2: 100 mA min.,3: 150 mA min."
newline
bitfld.long 0x0 24. "HS2_SRCTL_SEL,High side 2 slew rate control select" "0: Slew rate 10 V/us is enabled,1: Slew rate 30 V/us is enabled"
newline
bitfld.long 0x0 23. "HS2_CYC_ON_ACTIVE,High side 2 cyclic ON driver" "0: Cyclic ON driver OFF,1: Cyclic ON driver ON"
newline
bitfld.long 0x0 19. "HS2_OL_EN,High side 2 open load detection enable" "0: Disable open load detection,1: Enable open load detection"
newline
bitfld.long 0x0 18. "HS2_ON,High side 2 on" "0: HS driver off,1: HS driver on"
newline
bitfld.long 0x0 17. "HS2_PWM,High side 2 PWM enable" "0: Disables control by PWM input,1: Enables control by PWM input"
newline
bitfld.long 0x0 16. "HS2_EN,High side 2 enable" "0: HS circuit power off,1: HS circuit power on"
newline
bitfld.long 0x0 12.--13. "HS1_OC_SEL,High side 1 overcurrent threshold selection" "0: 25 mA min.,1: 50 mA min.,2: 100 mA min.,3: 150 mA min."
newline
bitfld.long 0x0 8. "HS1_SRCTL_SEL,High side 1 slew rate control select" "0: Slew rate 10 V/us is enabled,1: Slew rate 30 V/us is enabled"
newline
bitfld.long 0x0 7. "HS1_CYC_ON_ACTIVE,High side 1 cyclic ON driver" "0: Cyclic ON driver OFF,1: Cyclic ON driver ON"
newline
bitfld.long 0x0 3. "HS1_OL_EN,High side 1 open load detection enable" "0: Disable open load detection,1: Enable open load detection"
newline
bitfld.long 0x0 2. "HS1_ON,High side 1 on" "0: HS driver off,1: HS driver on"
newline
bitfld.long 0x0 1. "HS1_PWM,High side 1 PWM enable" "0: Disables control by PWM input,1: Enables control by PWM input"
newline
bitfld.long 0x0 0. "HS1_EN,High side 1 enable" "0: HS circuit power off,1: HS circuit power on"
group.long 0x1C++0x7
line.long 0x0 "HS1_TRIM,High-side driver 1 TRIM register"
bitfld.long 0x0 8.--9. "HS1_OC_OT_BTFILT_SEL,Blanking time filter select for HS1 overcurrent/overtemperature detection" "0: 4 us filter time,1: 8 us filter time,2: 16 us filter time,3: 32 us filter time"
newline
bitfld.long 0x0 0.--1. "HS1_OL_BTFILT_SEL,Blanking time filter select for HS1 open load detection" "0: 4 us filter time,1: 8 us filter time,2: 16 us filter time,3: 32 us filter time"
line.long 0x4 "HS2_TRIM,High-side driver 2 TRIM register"
bitfld.long 0x4 8.--9. "HS2_OC_OT_BTFILT_SEL,Blanking time/filter select for HS2 overcurrent/overtemperature detection" "0: 4 us filter time,1: 8 us filter time,2: 16 us filter time,3: 32 us filter time"
newline
bitfld.long 0x4 0.--1. "HS2_OL_BTFILT_SEL,Blanking time filter select for HS2 open load detection" "0: 4 us filter time,1: 8 us filter time,2: 16 us filter time,3: 32 us filter time"
wgroup.long 0xC++0x3
line.long 0x0 "IRQCLR,High-side driver interrupt status clear register"
bitfld.long 0x0 30. "HS2_OL_SC,High side 2 open load status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 29. "HS2_OT_SC,High side 2 overtemperature status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 23. "HS2_OC_ISC,High side 2 overcurrent interrupt status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 22. "HS2_OL_ISC,High side 2 open load interrupt status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 21. "HS2_OT_ISC,High side 2 overtemperature interrupt status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 14. "HS1_OL_SC,High side 1 open load status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 13. "HS1_OT_SC,High side 1 overtemperature status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 7. "HS1_OC_ISC,High side 1 overcurrent interrupt status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 6. "HS1_OL_ISC,High side 1 open load interrupt status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 5. "HS1_OT_ISC,High Side 1 overtemperature interrupt status clear" "0: No clear,1: Clear"
group.long 0x10++0x3
line.long 0x0 "IRQEN,High-side driver interrupt enable register"
bitfld.long 0x0 23. "HS2_OC_IEN,High side 2 overcurrent interrupt enable" "0: Disabled,1: Enable"
newline
bitfld.long 0x0 22. "HS2_OL_IEN,High side 2 open load interrupt enable" "0: Disabled,1: Enable"
newline
bitfld.long 0x0 21. "HS2_OT_IEN,High side 2 overtemperature interrupt enable" "0: Disabled,1: Enable"
newline
bitfld.long 0x0 7. "HS1_OC_IEN,High side 1 overcurrent interrupt enable" "0: Disabled,1: Enable"
newline
bitfld.long 0x0 6. "HS1_OL_IEN,High side 1 open load interrupt enable" "0: Disabled,1: Enable"
newline
bitfld.long 0x0 5. "HS1_OT_IEN,High Side 1 overtemperature interrupt enable" "0: Disabled,1: Enable"
group.long 0x8++0x3
line.long 0x0 "IRQS,High-side driver interrupt status register"
bitfld.long 0x0 30. "HS2_OL_STS,High side 2 open load interrupt status" "0: No open load condition occurred,1: Open load occurred; switch is not automatically.."
newline
bitfld.long 0x0 29. "HS2_OT_STS,High side 2 overtemperature status" "0: No overtemperature occurred,1: Overtemperature occurred; switch is.."
newline
bitfld.long 0x0 23. "HS2_OC_IS,High side 2 overcurrent interrupt status" "0: No overcurrent condition occurred,1: Overcurrent occurred; switch is automatically.."
newline
bitfld.long 0x0 22. "HS2_OL_IS,High side 2 open load interrupt status" "0: Normal load,1: Open load detected write sets status"
newline
bitfld.long 0x0 21. "HS2_OT_IS,High side 2 overtemperature interrupt status" "0: No overtemperature occurred,1: Overtemperature occurred; switch is.."
newline
bitfld.long 0x0 14. "HS1_OL_STS,High side 1 open load interrupt status" "0: No open load condition occurred,1: Open load occurred; switch is not automatically.."
newline
bitfld.long 0x0 13. "HS1_OT_STS,High side 1 overtemperature status" "0: No overtemperature occurred,1: Overtemperature occurred; switch is.."
newline
bitfld.long 0x0 7. "HS1_OC_IS,High side 1 overcurrent interrupt status" "0: No overcurrent condition occurred,1: Overcurrent occurred; switch is automatically.."
newline
bitfld.long 0x0 6. "HS1_OL_IS,High side 1 open load interrupt status" "0: Normal load,1: Open load detected write sets status"
newline
bitfld.long 0x0 5. "HS1_OT_IS,High side 1 overtemperature interrupt status" "0: No overtemperature occurred,1: Overtemperature occurred; switch is.."
group.long 0x24++0x3
line.long 0x0 "PWMSRCSEL,High-side PWM source selection register"
bitfld.long 0x0 3.--5. "HS1_SRC_SEL,HS1 PWM source selection" "0: PWM output of CCU6 (CC60),1: PWM output of CCU6 (CC61),2: PWM output of CCU6 (CC62),3: PWM output of CCU6 (COUT60),4: PWM output of CCU6 (COUT61),5: PWM output of CCU6 (COUT62),6: PWM output of GPT12,?"
newline
bitfld.long 0x0 0.--2. "HS2_SRC_SEL,HS2 PWM source selection" "0: PWM output of CCU6 (CC60),1: PWM output of CCU6 (CC61),2: PWM output of CCU6 (CC62),3: PWM output of CCU6 (COUT60),4: PWM output of CCU6 (COUT61),5: PWM output of CCU6 (COUT62),6: PWM output of GPT12,?"
tree.end
tree "LS (Low-Side Switch)"
base ad:0x4001C000
group.long 0x4++0x3
line.long 0x0 "CTRL,Low-side driver control register"
bitfld.long 0x0 24. "LS2_SRCTL_SEL,Low-side switch 2 slew rate selection" "0: Slow slew rate is selected,1: Fast slew rate is selected"
bitfld.long 0x0 19. "LS2_OL_EN,Open load detection enable" "0: Open load detection,1: Open load detection"
newline
bitfld.long 0x0 18. "LS2_ON,Low-Side switch 2 on/off" "0: Switches LS2 off,1: Turns LS2 on"
bitfld.long 0x0 17. "LS2_PWM,Low-side switch 2 PWM enable" "0: Normal mode controlled by LS2_ON,1: Enables LS2 for PWM mode"
newline
bitfld.long 0x0 16. "LS2_EN,Low-side switch 2 enable" "0: Disables LS2,1: Enables LS2"
bitfld.long 0x0 8. "LS1_SRCTL_SEL,Low-side switch 1 slew rate selection" "0: Slow slew rate is selected,1: Fast slew rate is selected"
newline
bitfld.long 0x0 3. "LS1_OL_EN,Open load detection enable" "0: Open load detection,1: Open load detection"
bitfld.long 0x0 2. "LS1_ON,Low-side switch 1 on/off" "0: Switches LS1 off,1: Turns LS1 on"
newline
bitfld.long 0x0 1. "LS1_PWM,Low-side switch 1 PWM enable" "0: Normal mode controlled by LS1_ON,1: Enables LS1 for PWM mode"
bitfld.long 0x0 0. "LS1_EN,Low-side switch 1 enable" "0: Disables LS1,1: Enables LS1"
wgroup.long 0xC++0x3
line.long 0x0 "IRQCLR,Low-side driver interrupt status clear register"
bitfld.long 0x0 30. "LS2_OL_SC,Low-side 2 open load status clear" "0: No clear,1: Clear"
bitfld.long 0x0 29. "LS2_OT_SC,Low-side switch 2 overtemperature status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 28. "LS2_OT_PREWARN_SC,Low-side 2 overtemperature prewarn status clear" "0: No clear,1: Clear"
bitfld.long 0x0 23. "LS2_OC_ISC,Low-side 2 overcurrent interrupt status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 22. "LS2_OL_ISC,Low-side 2 open load interrupt status clear" "0: No clear,1: Clear"
bitfld.long 0x0 21. "LS2_OT_ISC,Low-side 2 overtemperature interrupt status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 20. "LS2_OT_PREWARN_ISC,Low-side 2 overtemperature prewarn interrupt status clear" "0: No clear,1: Clear"
bitfld.long 0x0 14. "LS1_OL_SC,Low-side 1 open load status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 13. "LS1_OT_SC,Low-side 1 overtemperature status clear" "0: No clear,1: Clear"
bitfld.long 0x0 12. "LS1_OT_PREWARN_SC,Low-side 1 overtemperature prewarn status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 7. "LS1_OC_ISC,Low-side 1 overcurrent interrupt status clear" "0: No clear,1: Clear"
bitfld.long 0x0 6. "LS1_OL_ISC,Low-side 1 open load interrupt status clear" "0: No clear,1: Clear"
newline
bitfld.long 0x0 5. "LS1_OT_ISC,Low-side 1 overtemperature interrupt status clear" "0: No clear,1: Clear"
bitfld.long 0x0 4. "LS1_OT_PREWARN_ISC,Low-side 1 overtemperature prewarn interrupt status clear" "0: No clear,1: Clear"
group.long 0x10++0x3
line.long 0x0 "IRQEN,Low-side driver interrupt enable register"
bitfld.long 0x0 23. "LS2_OC_IEN,Low-side 2 overcurrent interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x0 22. "LS2_OL_IEN,Low-side 2 open load interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x0 21. "LS2_OT_IEN,Low-side 2 overtemperature interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x0 20. "LS2_OT_PREWARN_IEN,Low-side 2 overtemperature prewarn interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x0 7. "LS1_OC_IEN,Low-side 1 overcurrent interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x0 6. "LS1_OL_IEN,Low-side 1 open load interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x0 5. "LS1_OT_IEN,Low-side 1 overtemperature interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x0 4. "LS1_OT_PREWARN_IEN,Low-side 1 overtemperature prewarn interrupt enable" "0: Disabled,1: Enabled"
group.long 0x8++0x3
line.long 0x0 "IRQS,Low-side driver interrupt status register"
bitfld.long 0x0 30. "LS2_OL_STS,Low-side 2 open load status" "0: No open load condition occurred,1: Open load occurred; switch is not automatically.."
bitfld.long 0x0 29. "LS2_OT_STS,Low-Side 2 overtemperature status" "0: No overtemperature occurred,1: Overtemperature occurred; switch is.."
newline
bitfld.long 0x0 28. "LS2_OT_PREWARN_STS,Low-Side 2 overtemperature prewarning status" "0: No overtemperature prewarn occurred,1: Overtemperature prewarn occurred. Write sets.."
bitfld.long 0x0 23. "LS2_OC_IS,Low-Side 2 overcurrent interrupt status" "0: No overcurrent condition occurred,1: Overcurrent occurred; switch is automatically.."
newline
bitfld.long 0x0 22. "LS2_OL_IS,Low-Side 2 open load interrupt status" "0: No open load condition occurred,1: Open load occurred; switch is not automatically.."
bitfld.long 0x0 21. "LS2_OT_IS,Low-Side 2 overtemperature interrupt status" "0: No overtemperature occurred,1: Overtemperature occurred; switch is.."
newline
bitfld.long 0x0 20. "LS2_OT_PREWARN_IS,Low-Side 2 overtemperature prewarning interrupt status" "0: No overtemperature prewarn occurred,1: Overtemperature prewarn occurred. Write sets.."
bitfld.long 0x0 14. "LS1_OL_STS,Low-Side 1 open load status" "0: No open load condition occurred,1: Open load occurred; switch is not automatically.."
newline
bitfld.long 0x0 13. "LS1_OT_STS,Low-Side 1 overtemperature status" "0: No overtemperature occurred,1: Overtemperature occurred; switch is.."
bitfld.long 0x0 12. "LS1_OT_PREWARN_STS,Low-Side 1 overtemperature prewarning status" "0: No overtemperature prewarn occurred,1: Overtemperature prewarn occurred; Write sets.."
newline
bitfld.long 0x0 7. "LS1_OC_IS,Low-Side 1 overcurrent interrupt status" "0: No overcurrent condition occurred,1: Overcurrent occurred; switch is automatically.."
bitfld.long 0x0 6. "LS1_OL_IS,Low-Side 1 open load interrupt status" "0: No open load condition occurred,1: Open load occurred; switch is not automatically.."
newline
bitfld.long 0x0 5. "LS1_OT_IS,Low-Side 1 overtemperature interrupt status" "0: No overtemperature occurred,1: Overtemperature occurred; switch is.."
bitfld.long 0x0 4. "LS1_OT_PREWARN_IS,Low-Side 1 overtemperature prewarning interrupt status" "0: No overtemperature prewarn occurred.,1: Overtemperature prewarn occurred. Write sets.."
group.long 0x18++0x3
line.long 0x0 "LS1_TRIM,Low-side 1 reference current trimming register"
bitfld.long 0x0 8.--9. "LS1_OC_BTFILT_SEL,Overcurrent blanktime select for LS1" "0: 4 us filter time,1: 8 us filter time,2: 16 us filter time,3: 32 us filter time"
bitfld.long 0x0 0.--1. "LS1_OL_BTFILT_SEL,Open load blank time select for LS1" "0: 4 us filter time,1: 8 us filter time,2: 16 us filter time,3: 32 us filter time"
group.long 0x20++0x3
line.long 0x0 "LS2_TRIM,Low-side 2 reference current trimming register"
bitfld.long 0x0 8.--9. "LS2_OC_BTFILT_SEL,Overcurrent blank time select for LS2" "0: 4 us filter time,1: 8 us filter time,2: 16 us filter time,3: 32 us filter time"
bitfld.long 0x0 0.--1. "LS2_OL_BTFILT_SEL,Open load blank time select for LS2" "0: 4 us filter time,1: 8 us filter time,2: 16 us filter time,3: 32 us filter time"
group.long 0x1C++0x3
line.long 0x0 "PWMSRCSEL,Low-side PWM source selection register"
bitfld.long 0x0 3.--5. "LS1_SRC_SEL,LS1 PWM source selection" "0: PWM output of CCU6 (CC),1: PWM output of CCU6 (CC),2: PWM output of CCU6 (CC),3: PWM output of CCU6 (COUT),4: PWM output of CCU6 (COUT),5: PWM output of CCU6 (COUT),6: PWM output of GPT12,?"
bitfld.long 0x0 0.--2. "LS2_SRC_SEL,LS2 PWM source selection" "0: PWM output of CCU6 (CC),1: PWM output of CCU6 (CC),2: PWM output of CCU6 (CC),3: PWM output of CCU6 (COUT),4: PWM output of CCU6 (COUT),5: PWM output of CCU6 (COUT),6: PWM output of GPT12,?"
tree.end
tree "MF (Measurement Functions)"
base ad:0x48018000
rgroup.long 0x14++0x3
line.long 0x0 "REF1_STS,Reference 1 status register"
bitfld.long 0x0 5. "REFBG_UPTHWARN_STS,Status for overvoltage threshold measurement of internal VAREF" "0: Write clears status,1: Trigger status set"
bitfld.long 0x0 4. "REFBG_LOTHWARN_STS,Status for Undervoltage threshold measurement of internal VAREF" "0: Write clears status,1: Trigger status set"
group.long 0x10++0x3
line.long 0x0 "TEMPSENSE_CTRL,Temperature sensor control register"
rbitfld.long 0x0 7. "SYS_OT_STS,System overtemperature (MU) status" "0: Write clears status,1: Interrupt status set"
rbitfld.long 0x0 6. "SYS_OTWARN_STS,System overtemperature warning (MU) status" "0: Write clears status,1: Interrupt status set"
rbitfld.long 0x0 5. "LS_OT_STS,Low-side overtemperature (MU) status" "0: Write clears status,1: Interrupt status set"
newline
bitfld.long 0x0 4. "LS_OTWARN_STS,Low-side overtemperature warning (MU) status" "0: Write clears status,1: Interrupt status set"
tree.end
tree "PMU (Power Management Unit)"
base ad:0x50004000
group.long 0x6C++0x3
line.long 0x0 "CNF_RST_TFB,Reset blind time register"
bitfld.long 0x0 0.--1. "RST_TFB,Reset pin blind time selection bits" "0: 0.5 us typ.,1: 1 us typ.,2: 5 us typ.,3: 31 us typ."
group.long 0xAC++0x3
line.long 0x0 "CNF_WAKE_FILTER,PMU wake-up timing register"
bitfld.long 0x0 2.--3. "CNF_GPIO_FT,Wake-up filter time for general purpose IO" "0: 10 us filter time,1: 20 us filter time,2: 40 us filter time,3: 5 us filter time"
bitfld.long 0x0 1. "CNF_MON_FT,Wake-up filter time for monitoring inputs" "0: 20 us filter time,1: 40 us filter time"
newline
bitfld.long 0x0 0. "CNF_LIN_FT,Wake-up filter time for LIN WAKE" "0: 30 us filter time,1: 50 us filter time"
rgroup.long 0x4++0x3
line.long 0x0 "GPIO_WAKE_STATUS,GPIO port wake status register"
bitfld.long 0x0 12. "GPIO1_STS_4,Wake GPIO1_4" "0: No wake-up detected,1: Wake-up detected"
bitfld.long 0x0 10. "GPIO1_STS_2,Wake GPIO1_2" "0: No wake-up detected,1: Wake-up detected"
newline
bitfld.long 0x0 9. "GPIO1_STS_1,Wake GPIO1_1" "0: No wake-up detected,1: Wake-up detected"
bitfld.long 0x0 8. "GPIO1_STS_0,Wake GPIO1_0" "0: No wake-up detected,1: Wake-up detected"
group.long 0xC0++0xB
line.long 0x0 "GPUDATA0to3,General purpose user DATA0to3 register"
hexmask.long.byte 0x0 24.--31. 1. "DATA3,DATA3 storage byte"
hexmask.long.byte 0x0 16.--23. 1. "DATA2,DATA2 storage byte"
newline
hexmask.long.byte 0x0 8.--15. 1. "DATA1,DATA1 storage byte"
hexmask.long.byte 0x0 0.--7. 1. "DATA0,DATA0 storage byte"
line.long 0x4 "GPUDATA4to7,General purpose user DATA4to7 register"
hexmask.long.byte 0x4 24.--31. 1. "DATA7,DATA7 storage byte"
hexmask.long.byte 0x4 16.--23. 1. "DATA6,DATA6 storage byte"
newline
hexmask.long.byte 0x4 8.--15. 1. "DATA5,DATA5 storage byte"
hexmask.long.byte 0x4 0.--7. 1. "DATA4,DATA4 storage byte"
line.long 0x8 "GPUDATA8to11,General purpose user DATA8to11 register"
hexmask.long.byte 0x8 24.--31. 1. "DATA11,DATA11 storage byte"
hexmask.long.byte 0x8 16.--23. 1. "DATA10,DATA10 storage byte"
newline
hexmask.long.byte 0x8 8.--15. 1. "DATA9,DATA9 storage byte"
hexmask.long.byte 0x8 0.--7. 1. "DATA8,DATA8 storage byte"
group.long 0x5C++0x3
line.long 0x0 "HIGHSIDE_CTRL,High-side control register"
bitfld.long 0x0 10. "HS2_CYC_EN,High-side 2 switch enable for cyclic sense" "0: Disabled,1: Enabled"
bitfld.long 0x0 2. "HS1_CYC_EN,High-side 1 switch enable for cyclic sense" "0: Disabled,1: Enabled"
group.long 0x50++0x3
line.long 0x0 "LIN_WAKE_EN,LIN wake enable register"
bitfld.long 0x0 7. "LIN_EN,Lin wake enable" "0: Disabled,1: Enabled"
group.long 0x34++0x7
line.long 0x0 "MON_CNF1,Settings monitor 1-4 register"
rbitfld.long 0x0 31. "MON4_STS,MON4 status input" "0: MON input has low status,1: MON input has high status"
bitfld.long 0x0 29. "MON4_PU,Pull-up current source for MON4 input enable" "0: Pull-up source disabled,1: Pull-up source enabled"
newline
bitfld.long 0x0 28. "MON4_PD,Pull-down current source for MON4 input enable" "0: Pull-down source disabled,1: Pull-down source enabled"
bitfld.long 0x0 27. "MON4_CYC,MON4 for cycle sense enable" "0: Cycle sense disabled,1: Cycle sense enabled"
newline
bitfld.long 0x0 26. "MON4_RISE,MON4 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x0 25. "MON4_FALL,MON4 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
newline
bitfld.long 0x0 24. "MON4_EN,MON4 Enable" "0: MON4 disabled,1: MON4 enabled"
rbitfld.long 0x0 23. "MON3_STS,MON3 Status Input" "0: MON input has low status,1: MON input has high status"
newline
bitfld.long 0x0 21. "MON3_PU,Pull-up current source for MON3 Input enable" "0: Pull-up source disabled,1: Pull-up source enabled"
bitfld.long 0x0 20. "MON3_PD,Pull-down current source for MON3 input enable" "0: Pull-down source disabled,1: Pull-down source enabled"
newline
bitfld.long 0x0 19. "MON3_CYC,MON3 for cycle sense enable" "0: Cycle sense disabled,1: Cycle sense enabled"
bitfld.long 0x0 18. "MON3_RISE,MON3 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
newline
bitfld.long 0x0 17. "MON3_FALL,MON3 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x0 16. "MON3_EN,MON3 enable" "0: MON3 disabled,1: MON3 enabled"
newline
rbitfld.long 0x0 15. "MON2_STS,MON2 status input" "0: MON input has low status,1: MON input has high status"
bitfld.long 0x0 13. "MON2_PU,Pull-up current source for MON2 input enable" "0: Pull-up source disabled,1: Pull-up source enabled"
newline
bitfld.long 0x0 12. "MON2_PD,Pull-down current source for MON2 Input enable" "0: Pull-down source disabled,1: Pull-down source enabled"
bitfld.long 0x0 11. "MON2_CYC,MON2 for cycle sense enable" "0: Cycle sense disabled,1: Cycle sense enabled"
newline
bitfld.long 0x0 10. "MON2_RISE,MON2 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x0 9. "MON2_FALL,MON2 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
newline
bitfld.long 0x0 8. "MON2_EN,MON2 enable" "0: MON2 disabled,1: MON2 enabled"
rbitfld.long 0x0 7. "MON1_STS,MON1 status input" "0: MON input has low status,1: MON input has high status"
newline
bitfld.long 0x0 5. "MON1_PU,Pull-up current source for MON1 input enable" "0: Pull-up source disabled,1: Pull-up source enabled"
bitfld.long 0x0 4. "MON1_PD,Pull-down current source for MON1 input enable" "0: Pull-down source disabled,1: Pull-down source enabled"
newline
bitfld.long 0x0 3. "MON1_CYC,MON1 for cycle sense enable" "0: Cycle sense disabled,1: Cycle sense enabled"
bitfld.long 0x0 2. "MON1_RISE,MON1 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
newline
bitfld.long 0x0 1. "MON1_FALL,MON1 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x0 0. "MON1_EN,MON1 enable" "0: MON1 disabled,1: MON1 enabled"
line.long 0x4 "MON_CNF2,Settings monitor 5 register"
rbitfld.long 0x4 7. "MON5_STS,MON5 status input" "0: MON input has low status,1: MON input has high status"
bitfld.long 0x4 5. "MON5_PU,Pull-up current source for MON5 input enable" "0: Pull-up source disabled,1: Pull-up source enabled"
newline
bitfld.long 0x4 4. "MON5_PD,Pull-down current source for MON5 input enable" "0: Pull-down source disabled,1: Pull-down source enabled"
bitfld.long 0x4 3. "MON5_CYC,MON5 for cycle sense enable" "0: Cycle sense disabled,1: Cycle sense enabled"
newline
bitfld.long 0x4 2. "MON5_RISE,MON5 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x4 1. "MON5_FALL,MON5 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
newline
bitfld.long 0x4 0. "MON5_EN,MON5 enable" "0: MON5 disabled,1: MON5 enabled"
group.long 0x10++0x3
line.long 0x0 "RESET_STS,Reset status register"
bitfld.long 0x0 10. "LOCKUP,Lockup-reset flag" "0: No lockup-reset executed,1: Lockup-reset executed"
bitfld.long 0x0 9. "PMU_SOFT,Soft-reset flag" "0: No soft-reset executed,1: Soft-reset executed"
newline
bitfld.long 0x0 7. "PMU_VS_POR,Power-on reset flag" "0: No power-on reset executed,1: Power-on reset executed"
bitfld.long 0x0 6. "PMU_PIN,PIN-reset flag" "0: No PIN-reset executed,1: PIN-reset executed"
newline
bitfld.long 0x0 5. "PMU_ExtWDT,External watchdog (WDT1) reset flag" "0: No external watchdog reset executed,1: External watchdog reset executed"
bitfld.long 0x0 4. "PMU_ClkWDT,Clock watchdog (CLKWDT) reset flag" "0: Noclock watchdog reset executed,1: Clock watchdog reset executed"
newline
bitfld.long 0x0 3. "PMU_LPR,Low priority resets" "0: Low priority-reset executed,1: Low priority executed"
bitfld.long 0x0 2. "PMU_SleepEX,Flag which indicates a reset caused by sleep-exit" "0: No reset caused by sleep-exit executed,1: Reset caused by sleep-exit executed"
newline
bitfld.long 0x0 1. "PMU_WAKE,Flag which indicates a reset caused by stop-exit" "0: No reset caused by stop-exit executed,1: Reset caused by stop-exit executed"
bitfld.long 0x0 0. "SYS_FAIL,Flag which indicates a reset caused by a system fail reported in the corresponding fail register" "0: No reset caused by system fail executed,1: Reset caused by system fail executed"
group.long 0x20++0x3
line.long 0x0 "SLEEP,PMU sleep behavior register"
bitfld.long 0x0 24.--26. "CYC_SENSE_S_DEL,Sample delay in cyclic sense mode" "0: Is 10 us,1: Is 20 us,2: Is 30 us,3: Is 40 us,4: Is 60 us,5: Is 80 us,6: Is 100 us,7: Is 150 us"
bitfld.long 0x0 20.--21. "CYC_WAKE_E01,Exponent" "0: Exponent value is 0,1: Exponent value is 1,2: Exponent value is 2,3: Exponent value is 3"
newline
hexmask.long.byte 0x0 16.--19. 1. "CYC_WAKE_M03,Mantissa"
bitfld.long 0x0 12.--13. "CYC_SENSE_E01,Exponent" "0: Exponent value is 0,1: Exponent value is 1,2: Exponent value is 2,3: Exponent value is 3"
newline
hexmask.long.byte 0x0 8.--11. 1. "CYC_SENSE_M03,Mantissa"
bitfld.long 0x0 3. "CYC_SENSE_EN,Enabling cyclic sense" "0: Cyclic sense disabled,1: Cyclic sense enabled"
newline
bitfld.long 0x0 2. "CYC_WAKE_EN,Enabling cyclic wake" "0: Cyclic wake disabled,1: Cyclic wake enabled"
bitfld.long 0x0 1. "EN_0V9_N,Enables the reduction of the VDDC regulator output to reduced voltage during stop mode" "0: Output voltage reduction enabled,1: Output voltage reduction disabled"
newline
bitfld.long 0x0 0. "WAKE_W_RST,Wake-up with reset execution" "0: Stop-exit without reset execution,1: Stop-exit with reset execution"
group.long 0x8++0x7
line.long 0x0 "SUPPLY_STS,Voltage reg status register"
bitfld.long 0x0 6. "PMU_5V_FAIL_EN,Enabling of VDDP status information as interrupt source" "0: No interrupts are generated,1: Interrupts are generated"
rbitfld.long 0x0 5. "PMU_5V_OVERLOAD,Overload at VDDP regulator" "0: No overload,1: Overload"
newline
rbitfld.long 0x0 4. "PMU_5V_OVERVOLT,Overvoltage at VDDP regulator" "0: No overvoltage,1: Overvoltage"
bitfld.long 0x0 2. "PMU_1V5_FAIL_EN,Enabling of VDDC status information as interrupt source" "0: No interrupts are generated,1: Interrupts are generated"
newline
rbitfld.long 0x0 1. "PMU_1V5_OVERLOAD,Overload at VDDC regulator" "0: No overload,1: Overload"
rbitfld.long 0x0 0. "PMU_1V5_OVERVOLT,Overvoltage at VDDC regulator" "0: No overvoltage,1: Overvoltage"
line.long 0x4 "VDDEXT_CTRL,VDDEXT control register"
bitfld.long 0x4 13. "VDDEXT_OT_SC,VDDEXT supply overtemperature status clear" "0: VDDEXT overtemperature status not cleared,1: VDDEXT overtemperature status cleared"
bitfld.long 0x4 12. "VDDEXT_UV_ISC,VDDEXT supply undervoltage interrupt status clear" "0: VDDEXT undervoltage not cleared,1: VDDEXT undervoltage cleared"
newline
bitfld.long 0x4 11. "VDDEXT_OT_ISC,VDDEXT supply overtemperature interrupt status clear" "0: VDDEXTovertemperature not cleared,1: VDDEXTovertemperature cleared"
rbitfld.long 0x4 7. "VDDEXT_STABLE,VDDEXT supply stable" "0: VDDEXT not in stable condition,1: VDDEXT in stable condition"
newline
rbitfld.long 0x4 6. "VDDEXT_OT,VDDEXT supply overtemperature" "0: VDDEXT not in overtemperature condition,1: VDDEXT in overtemperature condition"
rbitfld.long 0x4 5. "VDDEXT_OT_STS,VDDEXT supply overtemperature status" "0: VDDEXT not in overtemperature condition,1: VDDEXT in overtemperature condition"
newline
rbitfld.long 0x4 4. "VDDEXT_UV_IS,VDDEXT supply undervoltage interrupt status" "0: VDDEXT not in undervoltage condition,1: VDDEXT in undervoltage condition"
rbitfld.long 0x4 3. "VDDEXT_OT_IS,VDDEXT supply overtemperature interrupt status" "0: VDDEXT no overtemperature condition,1: VDDEXT overtemperature condition"
newline
bitfld.long 0x4 2. "VDDEXT_FAIL_EN,Enabling of VDDEXT supply status information as interrupt source" "0: VDDEXT fail interrupts are disabled,1: VDDEXT fail Interrupts are enabled"
bitfld.long 0x4 1. "VDDEXT_CYC_EN,VDDEXT supply for cyclic sense enable" "0: VDDEXT for cyclic sense disable,1: VDDEXT for cyclic sense enable"
newline
bitfld.long 0x4 0. "VDDEXT_ENABLE,VDDEXT supply enable" "0: VDDEXT supply disabled,1: VDDEXT supply enabled"
group.long 0xCC++0x3
line.long 0x0 "WAKE_CNF_GPIO1,Wake configuration GPIO port 1 register"
bitfld.long 0x0 20. "CYC_4,GPIO1_4 input for cycle sense enable" "0: Input for cycle sense disabled,1: Input for cycle sense enabled"
bitfld.long 0x0 18. "CYC_2,GPIO1_2 input for cycle sense enable" "0: Input for cycle sense disabled,1: Input for cycle sense enabled"
newline
bitfld.long 0x0 17. "CYC_1,GPIO1_1 input for cycle sense enable" "0: Input for cycle sense disabled,1: Input for cycle sense enabled"
bitfld.long 0x0 16. "CYC_0,GPIO1_0 input for cycle sense enable" "0: Input for cycle sense disabled,1: Input for cycle sense enabled"
newline
bitfld.long 0x0 12. "FA_4,Port 1_4 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x0 10. "FA_2,Port 1_2 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
newline
bitfld.long 0x0 9. "FA_1,Port 1_1 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x0 8. "FA_0,Port 1_0 wake-up on falling edge enable" "0: Wake-up disabled,1: Wake-up enabled"
newline
bitfld.long 0x0 4. "RI_4,Port 1_4 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x0 2. "RI_2,Port 1_2 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
newline
bitfld.long 0x0 1. "RI_1,Port 1_1 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
bitfld.long 0x0 0. "RI_0,Port 1_0 wake-up on rising edge enable" "0: Wake-up disabled,1: Wake-up enabled"
rgroup.long 0x0++0x3
line.long 0x0 "WAKE_STATUS,Main wake status register"
bitfld.long 0x0 18. "VDDEXT_UV,Wake VDDEXT undervoltage" "0: No wake-up detected,1: Wake-up detected"
bitfld.long 0x0 17. "VDDEXT_OT,Wake VDDEXT overtemperature" "0: No wake-up detected,1: Wake-up detected"
newline
bitfld.long 0x0 12. "MON5_WAKE_STS,Status of MON5" "0: No wake-up detected,1: Wake-up detected"
bitfld.long 0x0 11. "MON4_WAKE_STS,Status of MON4" "0: No wake-up detected,1: Wake-up detected"
newline
bitfld.long 0x0 10. "MON3_WAKE_STS,Status of MON3" "0: No wake-up detected,1: Wake-up detected"
bitfld.long 0x0 9. "MON2_WAKE_STS,Status of MON2" "0: No wake-up detected,1: Wake-up detected"
newline
bitfld.long 0x0 8. "MON1_WAKE_STS,Status of MON1" "0: No wake-up detected,1: Wake-up detected"
bitfld.long 0x0 5. "FAIL,Wake-up after VDDEXT fail" "0: No wake-up occurred,1: Wake-up occurred"
newline
bitfld.long 0x0 4. "CYC_WAKE,Wake-up caused by cyclic wake" "0: No wake-up occurred,1: Wake-up occurred"
bitfld.long 0x0 3. "GPIO1,Wake-up via GPIO1 which is a logical OR combination of all Wake_STS_GPIO1 bits" "0: No wake-up occurred,1: Wake-up occurred"
newline
bitfld.long 0x0 1. "MON,Wake-up via MON which is a logical OR combination of all Wake_STS_MON bits" "0: No wake-up occurred,1: Wake-up occurred"
bitfld.long 0x0 0. "LIN_WAKE,Wake-up via LIN- Message" "0: No wake-up occurred,1: Wake-up occurred"
rgroup.long 0x70++0x3
line.long 0x0 "WFS,WFS system fail register"
bitfld.long 0x0 7. "LP_CLKWD,LP_CLKWD" "0: Normal operation,1: LP_CLK clock failure"
bitfld.long 0x0 6. "WDT1_SEQ_FAIL,External watchdog (WDT1) sequential fail" "0: No fail system working properly,1: 5 consecutive watchdog fails"
newline
bitfld.long 0x0 5. "SYS_OT,System overtemperature indication flag" "0: Normal operation,1: Overtemperature"
bitfld.long 0x0 3. "PMU_5V_OVL,VDDP overload flag" "0: VDDP ok,1: VDDP overload"
newline
bitfld.long 0x0 2. "PMU_1V5_OVL,VDDC overload flag" "0: VDDC ok,1: Hall VDDC overload"
bitfld.long 0x0 0. "SUPP_SHORT,Supply short" "0: VDDP or VDDC are in expected range,1: VDDP or VDDC do not have stable operating point"
tree.end
tree "PORT (Port Registers)"
base ad:0x48028000
group.long 0x14++0x7
line.long 0x0 "P0_ALTSEL0,Port 0 alternate select 0 register"
bitfld.long 0x0 5. "PP5,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
bitfld.long 0x0 4. "PP4,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
newline
bitfld.long 0x0 3. "PP3,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
bitfld.long 0x0 2. "PP2,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
newline
bitfld.long 0x0 1. "PP1,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
bitfld.long 0x0 0. "PP0,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
line.long 0x4 "P0_ALTSEL1,Port 0 alternate select 1 register"
bitfld.long 0x4 5. "PP5,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
bitfld.long 0x4 4. "PP4,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
newline
bitfld.long 0x4 3. "PP3,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
bitfld.long 0x4 2. "PP2,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
newline
bitfld.long 0x4 1. "PP1,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
bitfld.long 0x4 0. "PP0,Normal GPIO or alternate select 1  2 or 3 (depends on bits P0_ALTSEL0.PPx and P0_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
group.long 0x0++0xB
line.long 0x0 "P0_DATA,Port 0 data register"
rbitfld.long 0x0 21. "PP5_STS,Port 0 pin 5 data value (read back of port data when IO is configured as output)" "0: Port 0 pin 5 data value = 0,1: Port 0 pin 5 data value = 1"
rbitfld.long 0x0 20. "PP4_STS,Port 0 pin 4 data value (read back of port data when IO is configured as output)" "0: Port 0 pin 4 data value = 0,1: Port 0 pin 4 data value = 1"
newline
rbitfld.long 0x0 19. "PP3_STS,Port 0 pin 3 data value (read back of port data when IO is configured as output)" "0: Port 0 pin 3 data value = 0,1: Port 0 pin 3 data value = 1"
rbitfld.long 0x0 18. "PP2_STS,Port 0 pin 2 data value (read back of port data when IO is configured as output)" "0: Port 0 pin 2 data value = 0,1: Port 0 pin 2 data value = 1"
newline
rbitfld.long 0x0 17. "PP1_STS,Port 0 pin 1 data value (read back of port data when IO is configured as output)" "0: Port 0 pin 1 data value = 0,1: Port 0 pin 1 data value = 1"
rbitfld.long 0x0 16. "PP0_STS,Port 0 pin 0 data value (read back of port data when IO is configured as output)" "0: Port 0 pin 0 data value = 0,1: Port 0 pin 0 data value = 1"
newline
bitfld.long 0x0 5. "PP5,Port 0 pin 5 data value" "0: Port 0 pin 5 data value = 0,1: Port 0 pin 5 data value = 1"
bitfld.long 0x0 4. "PP4,Port 0 pin 4 data value" "0: Port 0 pin 4 data value = 0,1: Port 0 pin 4 data value = 1"
newline
bitfld.long 0x0 3. "PP3,Port 0 pin 3 data value" "0: Port 0 pin 3 data value = 0,1: Port 0 pin 3 data value = 1"
bitfld.long 0x0 2. "PP2,Port 0 pin 2 data value" "0: Port 0 pin 2 data value = 0,1: Port 0 pin 2 data value = 1"
newline
bitfld.long 0x0 1. "PP1,Port 0 pin 1 data value" "0: Port 0 pin 1 data value = 0,1: Port 0 pin 1 data value = 1"
bitfld.long 0x0 0. "PP0,Port 0 pin 0 data value" "0: Port 0 pin 0 data value = 0,1: Port 0 pin 0 data value = 1"
line.long 0x4 "P0_DIR,Port 0 direction register"
bitfld.long 0x4 21. "PP5_INEN,Port 0 pin 5 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
bitfld.long 0x4 20. "PP4_INEN,Port 0 pin 4 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
newline
bitfld.long 0x4 19. "PP3_INEN,Port 0 pin 3 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
bitfld.long 0x4 18. "PP2_INEN,Port 0 pin 2 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
newline
bitfld.long 0x4 17. "PP1_INEN,Port 0 pin 1 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
bitfld.long 0x4 16. "PP0_INEN,Port 0 pin 0 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
newline
bitfld.long 0x4 5. "PP5,Port 0 pin 5 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 4. "PP4,Port 0 pin 4 direction control" "0: Direction is set to input (default),1: Direction is set to output"
newline
bitfld.long 0x4 3. "PP3,Port 0 pin 3 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 2. "PP2,Port 0 pin 2 direction control" "0: Direction is set to input (default),1: Direction is set to output"
newline
bitfld.long 0x4 1. "PP1,Port 0 pin 1 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 0. "PP0,Port 0 pin 0 direction control" "0: Direction is set to input (default),1: Direction is set to output"
line.long 0x8 "P0_OD,Port 0 open drain control register"
bitfld.long 0x8 5. "PP5,Port 0 pin 5 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
bitfld.long 0x8 4. "PP4,Port 0 pin 4 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
newline
bitfld.long 0x8 3. "PP3,Port 0 pin 3 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
bitfld.long 0x8 2. "PP2,Port 0 pin 2 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
newline
bitfld.long 0x8 1. "PP1,Port 0 pin 1 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
bitfld.long 0x8 0. "PP0,Port 0 pin 0 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
group.long 0x10++0x3
line.long 0x0 "P0_PUDEN,Port 0 pull-up/pull-down enable register"
bitfld.long 0x0 5. "PP5,Pull-up/pull-down enable at port 0 bit 5" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 4. "PP4,Pull-up/pull-down enable at port 0 bit 4" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
newline
bitfld.long 0x0 3. "PP3,Pull-up/pull-down enable at port 0 bit 3" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 2. "PP2,Pull-up/pull-down enable at port 0 bit 2" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
newline
bitfld.long 0x0 1. "PP1,Pull-up/pull-down enable at port 0 bit 1" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 0. "PP0,Pull-up/pull-down enable at port 0 bit 0" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
group.long 0xC++0x3
line.long 0x0 "P0_PUDSEL,Port 0 pull-up/pull-down select register"
bitfld.long 0x0 5. "PP5,Pull-up/pull-down select port 0 bit 5" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 4. "PP4,Pull-up/pull-down select port 0 bit 4" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
newline
bitfld.long 0x0 3. "PP3,Pull-up/pull-down select port 0 bit 3" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 2. "PP2,Pull-up/pull-down select port 0 bit 2" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
newline
bitfld.long 0x0 1. "PP1,Pull-up/pull-down select port 0 bit 1" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 0. "PP0,Pull-up/pull-down select port 0 bit 0" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
group.long 0x34++0x7
line.long 0x0 "P1_ALTSEL0,Port 1 alternate select 0 register"
bitfld.long 0x0 4. "PP4,Normal GPIO or alternate select 1  2 or 3 (depends on bits P1_ALTSEL0.PPx and P1_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
bitfld.long 0x0 2. "PP2,Normal GPIO or alternate select 1  2 or 3 (depends on bits P1_ALTSEL0.PPx and P1_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
newline
bitfld.long 0x0 1. "PP1,Normal GPIO or alternate select 1  2 or 3 (depends on bits P1_ALTSEL0.PPx and P1_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
bitfld.long 0x0 0. "PP0,Normal GPIO or alternate select 1  2 or 3 (depends on bits P1_ALTSEL0.PPx and P1_ALTSEL1.PPx)" "0: Const_0,1: Const_1"
line.long 0x4 "P1_ALTSEL1,Port 1 alternate select 1 register"
bitfld.long 0x4 4. "PP4,PP4" "0: Const_0,1: Const_1"
bitfld.long 0x4 2. "PP2,PP2" "0: Const_0,1: Const_1"
newline
bitfld.long 0x4 1. "PP1,PP1" "0: Const_0,1: Const_1"
bitfld.long 0x4 0. "PP0,PP0" "0: Const_0,1: Const_1"
group.long 0x20++0xB
line.long 0x0 "P1_DATA,Port 1 data register"
bitfld.long 0x0 20. "PP4_STS,Port 1 pin 4 data value (read back of port data when IO is configured as output)" "0: Port 1 pin 4 data value = 0,1: Port 1 pin 4 data value = 1"
bitfld.long 0x0 18. "PP2_STS,Port 1 pin 2 data value (read back of port data when IO is configured as output)" "0: Port 1 pin 2 data value = 0,1: Port 1 pin 2 data value = 1"
newline
bitfld.long 0x0 17. "PP1_STS,Port 1 pin 1 data value (read back of port data when IO is configured as output)" "0: Port 1 pin 1 data value = 0,1: Port 1 pin 1 data value = 1"
bitfld.long 0x0 16. "PP0_STS,Port 1 pin 0 data value (read back of port data when IO is configured as output)" "0: Port 1 pin 0 data value = 0,1: Port 1 pin 0 data value = 1"
newline
bitfld.long 0x0 4. "PP4,Port 1 pin 4 data value" "0: Port 1 pin 4 data value = 0,1: Port 1 pin 4 data value = 1"
bitfld.long 0x0 2. "PP2,Port 1 pin 2 data value" "0: Port 1 pin 2 data value = 0,1: Port 1 pin 2 data value = 1"
newline
bitfld.long 0x0 1. "PP1,Port 1 pin 1 data value" "0: Port 1 pin 1 data value = 0,1: Port 1 pin 1 data value = 1"
bitfld.long 0x0 0. "PP0,Port 1 pin 0 data value" "0: Port 1 pin 0 data value = 0,1: Port 1 pin 0 data value = 1"
line.long 0x4 "P1_DIR,Port 1 direction register"
bitfld.long 0x4 20. "PP3_INEN,Port 1 pin 4 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
bitfld.long 0x4 18. "PP2_INEN,Port 1 pin 2 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
newline
bitfld.long 0x4 17. "PP1_INEN,Port 1 pin 1 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
bitfld.long 0x4 16. "PP0_INEN,Port 1 pin 0 input Schmitt trigger enable (only valid if IO is configured as output)" "0: Schmitt trigger is disabled (default),1: Schmitt trigger is enabled"
newline
bitfld.long 0x4 4. "PP4,Port 1 pin 4 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 2. "PP2,Port 1 pin 2 direction control" "0: Direction is set to input (default),1: Direction is set to output"
newline
bitfld.long 0x4 1. "PP1,Port 1 pin 1 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 0. "PP0,Port 1 pin 0 direction control" "0: Direction is set to input (default),1: Direction is set to output"
line.long 0x8 "P1_OD,Port 1 open drain control register"
bitfld.long 0x8 4. "PP4,Port 1 pin 4 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
bitfld.long 0x8 2. "PP2,Port 1 pin 2 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
newline
bitfld.long 0x8 1. "PP1,Port 1 pin 1 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
bitfld.long 0x8 0. "PP0,Port 1 pin 0 open drain mode" "0: Output is actively driven for 0 and 1 state..,1: Output is actively driven only for 0 state"
group.long 0x30++0x3
line.long 0x0 "P1_PUDEN,Port 1 pull-up/pull-down enable register"
bitfld.long 0x0 4. "PP4,Pull-up/pull-down enable at port 1 bit 4" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 2. "PP2,Pull-up/pull-down enable at port 1 bit 2" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
newline
bitfld.long 0x0 1. "PP1,Pull-up/pull-down enable at port 1 bit 1" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 0. "PP0,Pull-up/pull-down enable at port 1 bit 0" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
group.long 0x2C++0x3
line.long 0x0 "P1_PUDSEL,Port 1 pull-up/pull-down select register"
bitfld.long 0x0 4. "PP4,Pull-up/pull-down select port 1 bit 4" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 2. "PP2,Pull-up/pull-down select port 1 bit 2" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
newline
bitfld.long 0x0 1. "PP1,Pull-up/pull-down select port 1 bit 1" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 0. "PP0,Pull-up/pull-down select port 1 bit 0" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
group.long 0x40++0x7
line.long 0x0 "P2_DATA,Port 2 data register"
bitfld.long 0x0 7. "PP7,Port 2 pin 7 data value" "0: Port 2 pin 7 data value = 0,1: Port 2 pin 7 data value = 1"
bitfld.long 0x0 6. "PP6,Port 2 pin 6 data value" "0: Port 2 pin 6 data value = 0,1: Port 2 pin 6 data value = 1"
newline
bitfld.long 0x0 5. "PP5,Port 2 pin 5 data value" "0: Port 2 pin 5 data value = 0,1: Port 2 pin 5 data value = 1"
bitfld.long 0x0 4. "PP4,Port 2 pin 4 data value" "0: Port 2 pin 4 data value = 0,1: Port 2 pin 4 data value = 1"
newline
bitfld.long 0x0 3. "PP3,Port 2 pin 3 data value" "0: Port 2 pin 3 data value = 0,1: Port 2 pin 3 data value = 1"
bitfld.long 0x0 2. "PP2,Port 2 pin 2 data value" "0: Port 2 pin 2 data value = 0,1: Port 2 pin 2 data value = 1"
newline
bitfld.long 0x0 1. "PP1,Port 2 pin 1 data value" "0: Port 2 pin 1 data value = 0,1: Port 2 pin 1 data value = 1"
bitfld.long 0x0 0. "PP0,Port 2 pin 0 data value" "0: Port 2 pin 0 data value = 0,1: Port 2 pin 0 data value = 1"
line.long 0x4 "P2_DIR,Port 2 direction register"
bitfld.long 0x4 7. "PP7,Port 2 pin 7 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 6. "PP6,Port 2 pin 6 direction control" "0: Direction is set to input (default),1: Direction is set to output"
newline
bitfld.long 0x4 5. "PP5,Port 2 pin 5 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 4. "PP4,Port 2 pin 4 direction control" "0: Direction is set to input (default),1: Direction is set to output"
newline
bitfld.long 0x4 3. "PP3,Port 2 pin 3 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 2. "PP2,Port 2 pin 2 direction control" "0: Direction is set to input (default),1: Direction is set to output"
newline
bitfld.long 0x4 1. "PP1,Port 2 pin 1 direction control" "0: Direction is set to input (default),1: Direction is set to output"
bitfld.long 0x4 0. "PP0,Port 2 pin 0 direction control" "0: Direction is set to input (default),1: Direction is set to output"
group.long 0x50++0x3
line.long 0x0 "P2_PUDEN,Port 2 pull-up/pull-down enable register"
bitfld.long 0x0 7. "PP7,Pull-up/pull-down enable at port 2 bit 7" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 6. "PP6,Pull-up/pull-down enable at port 2 bit 6" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
newline
bitfld.long 0x0 5. "PP5,Pull-up/pull-down enable at port 2 bit 5" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 4. "PP4,Pull-up/pull-down enable at port 2 bit 4" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
newline
bitfld.long 0x0 3. "PP3,Pull-up/pull-down enable at port 2 bit 3" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 2. "PP2,Pull-up/pull-down enable at port 2 bit 2" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
newline
bitfld.long 0x0 1. "PP1,Pull-up/pull-down enable at port 2 bit 1" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
bitfld.long 0x0 0. "PP0,Pull-up/pull-down enable at port 2 bit 0" "0: Pull-up or pull-down device is disabled,1: Pull-up or pull-down device is enabled (default)"
group.long 0x4C++0x3
line.long 0x0 "P2_PUDSEL,Port 2 pull-up/pull-down select register"
bitfld.long 0x0 7. "PP7,Pull-up/pull-down select port 2 bit 7" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 6. "PP6,Pull-up/pull-down select port 2 bit 6" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
newline
bitfld.long 0x0 5. "PP5,Pull-up/pull-down select port 2 bit 5" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 4. "PP4,Pull-up/pull-down select port 2 bit 4" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
newline
bitfld.long 0x0 3. "PP3,Pull-up/pull-down select port 2 bit 3" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 2. "PP2,Pull-up/pull-down select port 2 bit 2" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
newline
bitfld.long 0x0 1. "PP1,Pull-up/pull-down select port 2 bit 1" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
bitfld.long 0x0 0. "PP0,Pull-up/pull-down select port 2 bit 0" "0: Pull-down device is selected,1: Pull-up device is selected (default)"
tree.end
tree "SCU (System Control Unit)"
base ad:0x0
tree "SCUDM (Digital Modules)"
base ad:0x50005000
group.long 0x6C++0x3
line.long 0x0 "ADC1_CLK,ADC1 peripheral clock register"
bitfld.long 0x0 8.--9. "DPP1_CLK_DIV,ADC1 post processing clock divider" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4"
newline
hexmask.long.byte 0x0 0.--3. 1. "ADC1_CLK_DIV,ADC1 clock divider"
group.long 0x58++0x3
line.long 0x0 "APCLK,Analog peripheral clock register"
bitfld.long 0x0 25. "BGCLK_DIV,Bandgap clock divider" "0: Divide by 2,1: Divide by 1"
newline
bitfld.long 0x0 24. "BGCLK_SEL,Bandgap clock selection" "0: LP_CLK is selected,1: fSYS is selected"
newline
hexmask.long.byte 0x0 8.--12. 1. "APCLK2FAC,Slow down clock divider for TFILT_CLK generation"
newline
bitfld.long 0x0 0.--1. "APCLK1FAC,Analog module clock factor" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4"
group.long 0x54++0x3
line.long 0x0 "APCLK_CTRL,Analog peripheral clock control register"
bitfld.long 0x0 8. "CLKWDT_IE,Clock watchdog interrupt enable" "0: Interrupt disabled,1: Interrupt enabled"
newline
bitfld.long 0x0 0. "APCLK_SET,Set and overtake flag for clock settings" "0: Clock settings are ignored (previous values are..,1: Clock settings are overtaken"
wgroup.long 0x64++0x3
line.long 0x0 "APCLK_SCLR,Analog peripheral clock status clear register"
bitfld.long 0x0 24. "PLL_LOCK_SCLR,PLL lock status clear" "0,1"
newline
bitfld.long 0x0 16. "APCLK3SCLR,Analog peripherals clock 3 status clear" "0,1"
newline
bitfld.long 0x0 8. "APCLK2SCLR,Analog peripherals clock status clear" "0,1"
newline
bitfld.long 0x0 0. "APCLK1SCLR,Analog peripherals clock status clear" "0,1"
rgroup.long 0x5C++0x3
line.long 0x0 "APCLK_STS,Analog peripheral clock status register"
bitfld.long 0x0 24. "PLL_LOCK,PLL LOCK status" "0: PLL has not locked,1: PLL has locked"
newline
bitfld.long 0x0 16. "APCLK3STS,Loss of clock status" "0: No loss of clock,1: Loss of lock occurred"
newline
bitfld.long 0x0 8.--9. "APCLK2STS,Analog peripherals clock status" "0: The TFILT_CLK clock is in the required range,1: The TFILT_CLK clock exceeds the higher limit,2: The TFILT_CLK clock exceeds the lower limit,3: The TFILT_CLK clock is not inside the specified.."
newline
bitfld.long 0x0 0.--1. "APCLK1STS,Analog peripherals clock status" "0: The MI_CLK clock is in the required range,1: The MI_CLK clock exceeds the higher limit,2: The MI_CLK clock exceeds the lower limit,3: The MI_CLK clock is not inside the specified limit"
group.long 0x88++0x3
line.long 0x0 "BCON1,Baud-rate control 1 register"
bitfld.long 0x0 1.--3. "BR1_PRE,Prescaler bit" "0: fDIV = fPCLK,1: fDIV = fPCLK/2,2: fDIV = fPCLK/4,3: fDIV = fPCLK/8,4: fDIV = fPCLK/16,5: fDIV = fPCLK/32,?,?"
newline
bitfld.long 0x0 0. "BR1_R,Baud-rate generator run control bit" "0: Baud-rate generator disabled,1: Baud-rate generator enabled"
group.long 0x98++0x3
line.long 0x0 "BCON2,Baud-rate control 2 register"
bitfld.long 0x0 1.--3. "BR2_PRE,Prescaler bit" "0: fDIV = fPCLK,1: fDIV = fPCLK/2,2: fDIV = fPCLK/4,3: fDIV = fPCLK/8,4: fDIV = fPCLK/16,5: fDIV = fPCLK/32,?,?"
newline
bitfld.long 0x0 0. "BR2_R,Baud-rate generator run control bit" "0: Baud-rate generator disabled,1: Baud-rate generator enabled"
group.long 0x90++0x3
line.long 0x0 "BG1,Baud-rate timer/reload 1 register"
hexmask.long.word 0x0 0.--10. 1. "BG1_BR_VALUE,Baud-rate timer/reload value UART1"
group.long 0xA0++0x3
line.long 0x0 "BG2,Baud-rate timer/reload 2 register"
hexmask.long.word 0x0 0.--10. 1. "BG2_BR_VALUE,Baud-rate timer/reload value UART2"
group.long 0x8C++0x3
line.long 0x0 "BGL1,Baud-rate timer/reload. low byte 1 register"
hexmask.long.byte 0x0 0.--4. 1. "BG1_FD_SEL,Fractional divider selection"
group.long 0x9C++0x3
line.long 0x0 "BGL2,Baud-rate timer/reload. low byte 2 register"
hexmask.long.byte 0x0 0.--4. 1. "BG2_FD_SEL,Fractional divider selection"
group.long 0x48++0x7
line.long 0x0 "CMCON1,Clock control 1 register"
bitfld.long 0x0 8.--9. "PDIV,PLL PDIV-divider" "0: 4,1: 5 (default),2: 6,3: 6"
newline
bitfld.long 0x0 6. "K1DIV,PLL K1-divider" "0: K1 = 2,1: divider"
newline
bitfld.long 0x0 4.--5. "K2DIV,PLL K2-divider" "0: K2 = 2,1: K2 = 3,2: divider,3: K2 = 5"
newline
hexmask.long.byte 0x0 0.--3. 1. "CLKREL,Slow down clock divider for fCCLK generation"
line.long 0x4 "CMCON2,Clock control 2 register"
bitfld.long 0x4 0. "PBA0CLKREL,PBA0 clock divider" "0: Divide by 1,1: Divide by 2"
group.long 0xB4++0x3
line.long 0x0 "COCON,Clock output control register"
bitfld.long 0x0 7. "EN,CLKOUT enable" "0: No external clock signal is provided,1: The configured external clock signal is provided"
newline
bitfld.long 0x0 6. "COUTS1,Clock out source select bit 1" "0: fCCLK is selected,1: Based on setting of COUTS0"
newline
bitfld.long 0x0 5. "TLEN,Toggle latch enable" "0: Toggle latch is disabled. Clock output frequency..,1: Toggle latch is enabled. Clock output frequency.."
newline
bitfld.long 0x0 4. "COUTS0,Clock out source select bit 0" "0: Oscillator output frequency is selected,1: Clock output frequency is chosen by the bit.."
newline
hexmask.long.byte 0x0 0.--3. 1. "COREL,Clock output divider"
group.long 0xD4++0x3
line.long 0x0 "EDCCON,Error detection and correction control register"
bitfld.long 0x0 2. "NVMIE,NVM double bit ECC error interrupt enable" "0: No NMI is generated when a double bit ECC error..,1: An NMI is generated when a double bit ECC error.."
newline
bitfld.long 0x0 0. "RIE,RAM double bit ECC error interrupt enable" "0: No NMI is generated when a double bit ECC error..,1: An NMI is generated when a double bit ECC error.."
wgroup.long 0x10C++0x3
line.long 0x0 "EDCSCLR,Error detection and correction status clear register"
bitfld.long 0x0 4. "RSBEC,RAM single bit error clear" "0: A single bit error on RAM is not cleared,1: A single bit error on RAM is cleared"
newline
bitfld.long 0x0 2. "NVMDBEC,NVM double bit error clear" "0: A double bit error on NVM is not cleared,1: A double bit error on NVM is cleared"
newline
bitfld.long 0x0 0. "RDBEC,RAM double bit error clear" "0: A double bit error on RAM is not cleared,1: A double bit error on RAM is cleared"
rgroup.long 0xD8++0x3
line.long 0x0 "EDCSTAT,Error detection and correction status register"
bitfld.long 0x0 4. "RSBE,RAM single bit error" "0: No single bit error on RAM has occurred,1: A single bit error on RAM has occurred"
newline
bitfld.long 0x0 2. "NVMDBE,NVM double bit error" "0: No double bit error on NVM has occurred,1: A double bit error on NVM has occurred"
newline
bitfld.long 0x0 0. "RDBE,RAM double bit error" "0: No double bit error on RAM has occurred,1: A double bit error on RAM has occurred"
group.long 0xCC++0x3
line.long 0x0 "EMOP,Emergency and program operation status register"
bitfld.long 0x0 1. "EMPROP,Emergency program operation status bit" "0: No emergency program operation is started,1: Emergency program operation is started"
newline
bitfld.long 0x0 0. "NVMPROP,NVM program operation status bit" "0: No NVM program operation is started,1: NVM program operation is started"
group.long 0x28++0x7
line.long 0x0 "EXICON0,External interrupt control 0 register"
bitfld.long 0x0 4.--5. "EXINT2,External interrupt 2 trigger select" "0: Interrupt disabled,1: Interrupt on rising edge,2: Interrupt on falling edge,3: Interrupt on both rising and falling edge"
newline
bitfld.long 0x0 2.--3. "EXINT1,External interrupt 1 trigger select" "0: Interrupt disabled,1: Interrupt on rising edge,2: Interrupt on falling edge,3: Interrupt on both rising and falling edge"
newline
bitfld.long 0x0 0.--1. "EXINT0,External interrupt 0 trigger select" "0: Interrupt disabled,1: Interrupt on rising edge,2: Interrupt on falling edge,3: Interrupt on both rising and falling edge"
line.long 0x4 "EXICON1,External interrupt control 1 register"
bitfld.long 0x4 8.--9. "MON5,MON5 input trigger select" "0: External interrupt MON is disabled,1: Interrupt on rising edge,2: Interrupt on falling edge,3: Interrupt on both rising and falling edge"
newline
bitfld.long 0x4 6.--7. "MON4,MON4 input trigger select" "0: External interrupt MON is disabled,1: Interrupt on rising edge,2: Interrupt on falling edge,3: Interrupt on both rising and falling edge"
newline
bitfld.long 0x4 4.--5. "MON3,MON3 input trigger select" "0: External interrupt MON is disabled,1: Interrupt on rising edge,2: Interrupt on falling edge,3: Interrupt on both rising and falling edge"
newline
bitfld.long 0x4 2.--3. "MON2,MON2 input trigger select" "0: External interrupt MON is disabled,1: Interrupt on rising edge,2: Interrupt on falling edge,3: Interrupt on both rising and falling edge"
newline
bitfld.long 0x4 0.--1. "MON1,MON1 input trigger select" "0: External interrupt MON is disabled,1: Interrupt on rising edge,2: Interrupt on falling edge,3: Interrupt on both rising and falling edge"
wgroup.long 0x180++0x3
line.long 0x0 "GPT12ICLR,Timer and counter control/status clear register"
bitfld.long 0x0 5. "GPT12CRC,GPT12 capture reload interrupt status" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 4. "GPT2T6C,GPT module 2 Timer6 interrupt status" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 3. "GPT2T5C,GPT module 2 Timer5 interrupt status" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 2. "GPT1T4C,GPT module 1 Timer4 interrupt status" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 1. "GPT1T3C,GPT module 1 Timer3 interrupt status" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 0. "GPT1T2C,GPT module 1 Timer2 interrupt status" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
group.long 0x15C++0x3
line.long 0x0 "GPT12IEN,General purpose timer 12 interrupt enable register"
bitfld.long 0x0 5. "CRIE,GPT12 capture and reload interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 4. "T6IE,GPT12 T6 interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 3. "T5IE,GPT12 T5 interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 2. "T4IE,GPT12 T4 interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 1. "T3IE,GPT12 T3 interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 0. "T2IE,GPT12 T2 interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
rgroup.long 0x160++0x3
line.long 0x0 "GPT12IRC,Timer and counter control/status register"
bitfld.long 0x0 5. "GPT12CR,GPT12 capture reload interrupt status" "0: No capture reload interrupt has occurred,1: Capture reload interrupt has occurred"
newline
bitfld.long 0x0 4. "GPT2T6,GPT module 2 Timer6 interrupt status" "0: No Timer6 interrupt has occurred,1: Timer6 interrupt has occurred"
newline
bitfld.long 0x0 3. "GPT2T5,GPT module 2 Timer5 interrupt status" "0: No Timer5 interrupt has occurred,1: Timer5 interrupt has occurred"
newline
bitfld.long 0x0 2. "GPT1T4,GPT module 1 Timer4 interrupt status" "0: No Timer4 interrupt has occurred,1: Timer4 interrupt has occurred"
newline
bitfld.long 0x0 1. "GPT1T3,GPT module 1 Timer3 interrupt status" "0: No Timer3 interrupt has occurred,1: Timer3 interrupt has occurred"
newline
bitfld.long 0x0 0. "GPT1T2,GPT module 1 Timer2 interrupt status" "0: No Timer2 interrupt has occurred,1: Timer2 interrupt has occurred"
group.long 0xD0++0x3
line.long 0x0 "GPT12PISEL,GPT12 peripheral input select register"
bitfld.long 0x0 5. "GPT12_SEL,CCU6 trigger configuration" "0: CCU6_INT is triggered by Timer21,1: CCU6_INT is triggered by GPT12PISEL.GPT12"
newline
bitfld.long 0x0 4. "TRIG_CONF,CCU6 trigger Configuration" "0: Trigger is just for one measurement (default),1: Trigger is present until next input edge.."
newline
hexmask.long.byte 0x0 0.--3. 1. "GPT12,GPT12 T3INB/T4IND input select"
group.long 0xA8++0x3
line.long 0x0 "ID,Identity register"
hexmask.long.byte 0x0 3.--7. 1. "PRODID,Product ID"
newline
bitfld.long 0x0 0.--2. "VERID,Version ID" "0,1,2,3,4,5,6,7"
group.long 0x1C++0x3
line.long 0x0 "IEN0,Interrupt enable 0 register"
bitfld.long 0x0 31. "EA,Global interrupt mask" "0: All pending interrupt requests (except NMI) are..,1: Pending interrupt requests are not blocked from.."
rgroup.long 0x4++0x3
line.long 0x0 "IRCON0,Interrupt request 0 register"
bitfld.long 0x0 5. "EXINT2F,Interrupt flag for external interrupt 2x on falling edge" "0: Interrupt on falling edge event has not occurred,1: Interrupt on falling edge event has occurred"
newline
bitfld.long 0x0 4. "EXINT2R,Interrupt flag for external interrupt 2x on rising edge" "0: Interrupt on rising edge event has not occurred,1: Interrupt on rising edge event has occurred"
newline
bitfld.long 0x0 3. "EXINT1F,Interrupt flag for external interrupt 1x on falling edge" "0: Interrupt on falling edge event has not occurred,1: Interrupt on falling edge event has occurred"
newline
bitfld.long 0x0 2. "EXINT1R,Interrupt flag for external interrupt 1x on rising edge" "0: Interrupt on rising edge event has not occurred,1: Interrupt on rising edge event has occurred"
newline
bitfld.long 0x0 1. "EXINT0F,Interrupt flag for external interrupt 0x on falling edge" "0: Interrupt on falling edge event has not occurred,1: Interrupt on falling edge event has occurred"
newline
bitfld.long 0x0 0. "EXINT0R,Interrupt flag for external interrupt 0x on rising edge" "0: Interrupt on rising edge event has not occurred,1: Interrupt on rising edge event has occurred"
wgroup.long 0x178++0x3
line.long 0x0 "IRCON0CLR,Interrupt request 0 clear register"
bitfld.long 0x0 5. "EXINT2FC,Interrupt flag for external interrupt 2x on falling edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 4. "EXINT2RC,Interrupt flag for external interrupt 2x on rising edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 3. "EXINT1FC,Interrupt flag for external interrupt 1x on falling edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 2. "EXINT1RC,Interrupt flag for external interrupt 1x on rising edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 1. "EXINT0FC,Interrupt flag for external interrupt 0x on falling edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 0. "EXINT0RC,Interrupt flag for external interrupt 0x on rising edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
rgroup.long 0x8++0x3
line.long 0x0 "IRCON1,Interrupt request 1 register"
bitfld.long 0x0 9. "MON5F,Interrupt flag for MON5x on falling edge" "0: Interrupt on falling edge event has not occurred,1: Interrupt on falling edge event has occurred"
newline
bitfld.long 0x0 8. "MON5R,Interrupt flag for MON5x on rising edge" "0: Interrupt on rising edge event has not occurred,1: Interrupt on rising edge event has occurred"
newline
bitfld.long 0x0 7. "MON4F,Interrupt flag for MON4x on falling edge" "0: Interrupt on falling edge event has not occurred,1: Interrupt on falling edge event has occurred"
newline
bitfld.long 0x0 6. "MON4R,Interrupt flag for MON4x on rising edge" "0: Interrupt on rising edge event has not occurred,1: Interrupt on rising edge event has occurred"
newline
bitfld.long 0x0 5. "MON3F,Interrupt flag for MON3x on falling edge" "0: Interrupt on falling edge event has not occurred,1: Interrupt on falling edge event has occurred"
newline
bitfld.long 0x0 4. "MON3R,Interrupt flag for MON3x on rising edge" "0: Interrupt on rising edge event has not occurred,1: Interrupt on rising edge event has occurred"
newline
bitfld.long 0x0 3. "MON2F,Interrupt flag for MON2x on falling edge" "0: Interrupt on falling edge event has not occurred,1: Interrupt on falling edge event has occurred"
newline
bitfld.long 0x0 2. "MON2R,Interrupt flag for MON2x on rising edge" "0: Interrupt on rising edge event has not occurred,1: Interrupt on rising edge event has occurred"
newline
bitfld.long 0x0 1. "MON1F,Interrupt flag for MON1x on falling edge" "0: Interrupt on falling edge event has not occurred,1: Interrupt on falling edge event has occurred"
newline
bitfld.long 0x0 0. "MON1R,Interrupt flag for MON1x on rising edge" "0: Interrupt on rising edge event has not occurred,1: Interrupt on rising edge event has occurred"
wgroup.long 0x17C++0x3
line.long 0x0 "IRCON1CLR,Interrupt request 1 clear register"
bitfld.long 0x0 9. "MON5FC,Interrupt flag for MON5x on falling edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 8. "MON5RC,Interrupt flag for MON5x on rising edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 7. "MON4FC,Interrupt flag for MON4x on falling edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 6. "MON4RC,Interrupt flag for MON4x on rising edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 5. "MON3FC,Interrupt flag for MON3x on falling edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 4. "MON3RC,Interrupt flag for MON3x on rising edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 3. "MON2FC,Interrupt flag for MON2x on falling edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 2. "MON2RC,Interrupt flag for MON2x on rising edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 1. "MON1FC,Interrupt flag for MON1x on falling edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 0. "MON1RC,Interrupt flag for MON1x on rising edge" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
rgroup.long 0xC++0x3
line.long 0x0 "IRCON2,Interrupt request 2 register"
bitfld.long 0x0 2. "RIR1,Receive interrupt flag for SSC1" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
newline
bitfld.long 0x0 1. "TIR1,Transmit interrupt flag for SSC1" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
newline
bitfld.long 0x0 0. "EIR1,Error interrupt flag for SSC1" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
wgroup.long 0x190++0x3
line.long 0x0 "IRCON2CLR,Interrupt request 2 clear register"
bitfld.long 0x0 2. "RIR1C,Receive interrupt flag for SSC1" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 1. "TIR1C,Transmit interrupt flag for SSC1" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 0. "EIR1C,Error interrupt flag for SSC1" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
rgroup.long 0x10++0x3
line.long 0x0 "IRCON3,Interrupt request 3 register"
bitfld.long 0x0 2. "RIR2,Receive interrupt flag for SSC2" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
newline
bitfld.long 0x0 1. "TIR2,Transmit interrupt flag for SSC2" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
newline
bitfld.long 0x0 0. "EIR2,Error interrupt flag for SSC2" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
wgroup.long 0x194++0x3
line.long 0x0 "IRCON3CLR,Interrupt request 3 clear register"
bitfld.long 0x0 2. "RIR2C,Receive interrupt flag for SSC2" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 1. "TIR2C,Transmit interrupt flag for SSC2" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 0. "EIR2C,Error interrupt flag for SSC2" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
rgroup.long 0x14++0x3
line.long 0x0 "IRCON4,Interrupt request 4 register"
bitfld.long 0x0 20. "CCU6SR3,Interrupt flag 3 for CCU6" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
newline
bitfld.long 0x0 16. "CCU6SR2,Interrupt flag 2 for CCU6" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
newline
bitfld.long 0x0 4. "CCU6SR1,Interrupt flag 1 for CCU6" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
newline
bitfld.long 0x0 0. "CCU6SR0,Interrupt flag 0 for CCU6" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
wgroup.long 0x198++0x3
line.long 0x0 "IRCON4CLR,Interrupt request 4 clear register"
bitfld.long 0x0 20. "CCU6SR3C,Interrupt flag 3 for CCU6" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 16. "CCU6SR2C,Interrupt flag 2 for CCU6" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 4. "CCU6SR1C,Interrupt flag 1 for CCU6" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 0. "CCU6SR0C,Interrupt flag 0 for CCU6" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
rgroup.long 0x7C++0x3
line.long 0x0 "IRCON5,Interrupt request 5 register"
bitfld.long 0x0 0. "WAKEUP,Interrupt flag for wake-up" "0: Interrupt event has not occurred,1: Interrupt event has occurred"
wgroup.long 0x19C++0x3
line.long 0x0 "IRCON5CLR,Interrupt request 5 clear register"
bitfld.long 0x0 0. "WAKEUPC,Clear flag for wake-up interrupt" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
wgroup.long 0xA4++0x3
line.long 0x0 "LINSCLR,LIN status clear register"
bitfld.long 0x0 5. "ERRSYNC,SYN byte error interrupt flag" "0: Error in SYN byte not cleared,1: Error in SYN byte cleared"
newline
bitfld.long 0x0 4. "EOFSYNC,End of SYN byte interrupt flag clear" "0: End of SYN byte is not cleared,1: End of SYN byte is cleared"
newline
bitfld.long 0x0 3. "BRKC,Break field flag clear" "0: Break field is not cleared,1: Break field is cleared"
group.long 0x94++0x3
line.long 0x0 "LINST,LIN status register"
bitfld.long 0x0 6. "SYNEN,End of SYN byte and SYN byte error interrupts enable" "0: End of SYN byte and SYN byte error interrupts..,1: End of SYN byte and SYN byte error interrupts.."
newline
rbitfld.long 0x0 5. "ERRSYN,SYN byte error interrupt flag" "0: Error is not detected in SYN byte,1: Error is detected in SYN byte"
newline
rbitfld.long 0x0 4. "EOFSYN,End of SYN byte interrupt flag" "0: End of SYN byte is not detected,1: End of SYN byte is detected"
newline
rbitfld.long 0x0 3. "BRK,Break field flag" "0: Break field is not detected,1: Break field is detected"
newline
bitfld.long 0x0 1.--2. "BGSEL,Baud-rate select for detection" "0,1,2,3"
newline
bitfld.long 0x0 0. "BRDIS,Baud-rate detection disable" "0: Break/sync detection is enabled,1: Break/sync detection is disabled"
rgroup.long 0xE4++0x3
line.long 0x0 "MEM_ACC_STS,Memory access status register"
bitfld.long 0x0 4. "ROM_PROT_ERR,ROM access protection" "0: No Protection error,1: Protection error"
newline
bitfld.long 0x0 3. "NVM_SFR_ADDR_ERR,NVM SFR address protection" "0: No Protection error,1: Protection error"
newline
bitfld.long 0x0 2. "NVM_SFR_PROT_ERR,NVM SFR access protection" "0: No Protection error,1: Protection error"
newline
bitfld.long 0x0 1. "NVM_ADDR_ERR,NVM address protection" "0: No Protection error,1: Protection error"
newline
bitfld.long 0x0 0. "NVM_PROT_ERR,NVM access protection" "0: No Protection error,1: Protection error"
group.long 0xDC++0x3
line.long 0x0 "MEMSTAT,Memory status register"
bitfld.long 0x0 6.--7. "SASTATUS,Service algorithm status" "0: Depending on SECTORINFO,1: SA execution is successful,2: SA execution is not successful. Map error exists..,3: SA execution is not successful. Map error exists.."
newline
hexmask.long.byte 0x0 0.--5. 1. "SECTORINFO,Sector information"
group.long 0x30++0xF
line.long 0x0 "MODIEN1,Peripheral interrupt enable 1 register"
bitfld.long 0x0 10. "RIREN2,SSC 2 receive interrupt enable" "0: Receive interrupt is disabled,1: Receive interrupt is enabled"
newline
bitfld.long 0x0 9. "TIREN2,SSC 2 transmit interrupt enable" "0: Transmit interrupt is disabled,1: Transmit interrupt is enabled"
newline
bitfld.long 0x0 8. "EIREN2,SSC 2 error interrupt enable" "0: Error interrupt is disabled,1: Error interrupt is enabled"
newline
bitfld.long 0x0 2. "RIREN1,SSC 1 receive interrupt enable" "0: Receive interrupt is disabled,1: Receive interrupt is enabled"
newline
bitfld.long 0x0 1. "TIREN1,SSC 1 transmit interrupt enable" "0: Transmit interrupt is disabled,1: Transmit interrupt is enabled"
newline
bitfld.long 0x0 0. "EIREN1,SSC 1 error interrupt enable" "0: Error interrupt is disabled,1: Error interrupt is enabled"
line.long 0x4 "MODIEN2,Peripheral interrupt enable 2 register"
bitfld.long 0x4 7. "TIEN2,UART 2 transmit interrupt enable" "0: Transmit interrupt is disabled,1: Transmit interrupt is enabled"
newline
bitfld.long 0x4 6. "RIEN2,UART 2 receive interrupt enable" "0: Receive interrupt is disabled,1: Receive interrupt is enabled"
newline
bitfld.long 0x4 5. "EXINT2_EN,External interrupt 2 enable" "0: External interrupt is disabled,1: External interrupt is enabled"
newline
bitfld.long 0x4 1. "TIEN1,UART 1 transmit interrupt enable" "0: Transmit interrupt is disabled,1: Transmit interrupt is enabled"
newline
bitfld.long 0x4 0. "RIEN1,UART 1 receive interrupt enable" "0: Receive interrupt is disabled,1: Receive interrupt is enabled"
line.long 0x8 "MODIEN3,Peripheral interrupt enable 3 register"
bitfld.long 0x8 0. "IE0,External interrupt enable" "0: Disabled,1: Enabled"
line.long 0xC "MODIEN4,Peripheral interrupt enable 4 register"
bitfld.long 0xC 0. "IE1,External interrupt enable" "0: Disabled,1: Enabled"
group.long 0xB8++0xF
line.long 0x0 "MODPISEL,Peripheral input select register"
bitfld.long 0x0 18. "SSC12_S_MRST_OUTSEL,Output selection for SSC12_S_MRST" "0: SSC1_S_MRST,1: SSC2_S_MRST"
newline
bitfld.long 0x0 17. "SSC12_M_MTSR_OUTSEL,Output selection for SSC12_M_MTSR" "0: SSC1_M_MTSR,1: SSC2_M_MTSR"
newline
bitfld.long 0x0 16. "SSC12_M_SCK_OUTSEL,Output selection for SSC12_M_SCK" "0: SSC1_M_SCK,1: SSC2_M_SCK"
newline
bitfld.long 0x0 7. "U_TX_CONDIS,TRX input select" "0: Transceiver TXD input connected to UART1_TXD..,1: Transceiver TXD input connected to GPIO"
newline
bitfld.long 0x0 6. "URIOS1,UART1 input select" "0: UART1 receiver input UART1_RXD (connected to..,1: UART1 receiver input UART1_RXD (connected to GPIO)"
newline
bitfld.long 0x0 4.--5. "EXINT2IS,External interrupt 2 input select" "0: External interrupt input EXINT2_0 is selected,1: External interrupt input EXINT2_1 is selected,2: External interrupt input EXINT2_2 is selected,3: External interrupt input EXINT2_3 is selected"
newline
bitfld.long 0x0 2.--3. "EXINT1IS,External interrupt 1 input select" "0: External interrupt input EXINT1_0 is selected,1: External interrupt input EXINT1_1 is selected,2: External interrupt input EXINT1_2 is selected,3: External interrupt input EXINT1_3 is selected"
newline
bitfld.long 0x0 0.--1. "EXINT0IS,External interrupt 0 input select" "0: External interrupt input EXINT0_0 is selected,1: External interrupt input EXINT0_1 is selected,2: External interrupt input EXINT0_2 is selected,3: External interrupt input EXINT0_3 is selected"
line.long 0x4 "MODPISEL1,Peripheral input select 1 register"
bitfld.long 0x4 7. "T21EXCON,Timer 21 external input control" "0: Timer21 input T21EX is selected by bit field..,1: Timer21 input T21EX is connected to signal from.."
newline
bitfld.long 0x4 6. "T2EXCON,Timer 2 external input control" "0: Timer2 input T2EX is selected by bit field..,1: Timer2 input T2EX is connected to signal from.."
newline
bitfld.long 0x4 0. "XTAL12EN,Pins XTAL1/2 enable bit" "0: Pins XTAL1/2 is not available. This setting..,1: Pins XTAL1/2 is available"
line.long 0x8 "MODPISEL2,Peripheral input select 2 register"
bitfld.long 0x8 6.--7. "T21EXIS,Timer 21 external input select" "0: Timer21 input T21EX_0 is selected,1: Timer21 input T21EX_1 is selected,2: Timer21 input T21EX_2 is selected,3: Timer21 input T21EX_3 is selected"
newline
bitfld.long 0x8 4.--5. "T2EXIS,Timer 2 external input select" "0: Timer2 input T2EX_0 is selected,1: Timer2 input T2EX_1 is selected,2: Timer2 input T2EX_2 i selected,3: Timer2 input T2EX_3 is selected"
newline
bitfld.long 0x8 2.--3. "T21IS,Timer 21 input select" "0: Timer21 input T21_0 is selected,1: Timer21 input T21_1 is selected,2: Timer21 input T21_2 is selected,?"
newline
bitfld.long 0x8 0.--1. "T2IS,Timer 2 input select" "0: Timer2 input T2_0 is selected,1: Timer2 input T2_1 is selected,2: Timer2 input T2_2 is selected,?"
line.long 0xC "MODPISEL3,Peripheral input select 3 register"
bitfld.long 0xC 6. "URIOS2,UART2 input select" "0: UART2 receiver input UART2_RXD (connected to GPIO),1: UART2 receiver input UART2_RXD (connected to GPIO)"
group.long 0xFC++0x3
line.long 0x0 "MODPISEL4,Peripheral input select 4 register"
bitfld.long 0x0 24.--26. "DU4TRIGGEN,Differential unit trigger enable" "0: CC60 is selected,1: CC61 is selected,2: CC62 is selected,3: COUT60 is selected,4: COUT61 is selected,5: COUT62 is selected,6: T3OUT is selected,7: COUT63 is selected"
newline
bitfld.long 0x0 16.--18. "DU3TRIGGEN,Differential unit trigger enable" "0: CC60 is selected,1: CC61 is selected,2: CC62 is selected,3: COUT60 is selected,4: COUT61 is selected,5: COUT62 is selected,6: T3OUT is selected,7: COUT63 is selected"
newline
bitfld.long 0x0 8.--10. "DU2TRIGGEN,Differential unit trigger enable" "0: CC60 is selected,1: CC61 is selected,2: CC62 is selected,3: COUT60 is selected,4: COUT61 is selected,5: COUT62 is selected,6: T3OUT is selected,7: COUT63 is selected"
newline
bitfld.long 0x0 0.--2. "DU1TRIGGEN,Differential unit trigger enable" "0: CC60 is selected,1: CC61 is selected,2: CC62 is selected,3: COUT60 is selected,4: COUT61 is selected,5: COUT62 is selected,6: T3OUT is selected,7: COUT63 is selected"
group.long 0xC8++0x3
line.long 0x0 "MODSUSP,Module suspend control register"
bitfld.long 0x0 10. "ADC1_SUSP,ADC1 unit debug suspend bit" "0: ADC1 will not be suspended,1: ADC1 will be suspended"
newline
bitfld.long 0x0 9. "MU_SUSP,Measurement unit debug suspend bit" "0: MU will not be suspended,1: MU will be suspended"
newline
bitfld.long 0x0 7. "WDT1SUSP,Watchdog timer 1 debug suspend bit" "0: WDT1 will not be suspended,1: WDT1 will be suspended"
newline
bitfld.long 0x0 6. "T21_SUSP,Timer 21 debug suspend bit" "0: Timer21 will not be suspended,1: Timer21 will be suspended"
newline
bitfld.long 0x0 4. "GPT12_SUSP,GPT12 debug suspend bit" "0: GPT12 will not be suspended,1: GPT12 will be suspended"
newline
bitfld.long 0x0 3. "T2_SUSP,Timer 2 debug suspend bit" "0: Timer2 will not be suspended,1: Timer2 will be suspended"
newline
bitfld.long 0x0 2. "T13SUSP,Timer 13 debug suspend bit" "0: Timer13 in capture/compare unit will not be..,1: Timer13 in capture/compare unit will be suspended"
newline
bitfld.long 0x0 1. "T12SUSP,Timer 12 debug suspend bit" "0: Timer12 in capture/compare unit will not be..,1: Timer12 in capture/compare unit will be suspended"
group.long 0x18C++0x3
line.long 0x0 "MONIEN,Monitoring input interrupt enable register"
bitfld.long 0x0 4. "MON5IE,MON5 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x0 3. "MON4IE,MON4 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x0 2. "MON3IE,MON3 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x0 1. "MON2IE,MON2 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x0 0. "MON1IE,MON1 interrupt enable" "0: Disabled,1: Enabled"
group.long 0x24++0x3
line.long 0x0 "NMICON,NMI control register"
bitfld.long 0x0 7. "NMISUP,Supply prewarning NMI enable" "0: Supply NMI is disabled,1: Supply NMI is enabled"
newline
bitfld.long 0x0 6. "NMIECC,ECC error NMI enable" "0: ECC Error NMI is disabled,1: ECC Error NMI is enabled"
newline
bitfld.long 0x0 5. "NMIMAP,NVM map error NMI enable" "0: NVM map error NMI is disabled,1: NVM map error NMI is enabled"
newline
bitfld.long 0x0 4. "NMIOWD,Oscillator watchdog NMI enable" "0: Oscillator watchdog NMI is disabled,1: Oscillator watchdog NMI is enabled"
newline
bitfld.long 0x0 3. "NMIOT,NMI OT enable" "0: NMI OT is disabled,1: NMI OT is enabled"
newline
bitfld.long 0x0 2. "NMINVM,NVM operation complete NMI enable" "0: NVM operation complete NMI is disabled,1: NVM operation complete NMI is enabled"
newline
bitfld.long 0x0 1. "NMIPLL,PLL loss of lock NMI enable" "0: PLL loss of lock NMI is disabled,1: PLL loss of lock NMI is enabled"
rgroup.long 0x18++0x3
line.long 0x0 "NMISR,NMI status register"
bitfld.long 0x0 7. "FNMISUP,Supply prewarning NMI flag" "0: No supply prewarning NMI has occurred,1: Supply prewarning has occurred"
newline
bitfld.long 0x0 6. "FNMIECC,ECC error NMI flag" "0: No uncorrectable ECC error has occurred on NVM..,1: Uncorrectable ECC error has occurred on NVM RAM"
newline
bitfld.long 0x0 5. "FNMIMAP,NVM map error NMI flag" "0: No NVM map error NMI has occurred,1: NVM map error has occurred"
newline
bitfld.long 0x0 4. "FNMIOWD,Oscillator watchdog NMI flag" "0: No oscillator watchdog NMI has occurred,1: Oscillator watchdog event has occurred"
newline
bitfld.long 0x0 3. "FNMIOT,Overtemperature NMI flag" "0: No OT NMI has occurred,1: OT NMI event has occurred"
newline
bitfld.long 0x0 2. "FNMINVM,NVM operation complete NMI flag" "0: No NVM NMI has occurred,1: NVM operation complete event has occurred"
newline
bitfld.long 0x0 1. "FNMIPLL,PLL NMI flag" "0: No PLL NMI has occurred,1: PLL loss-of-lock to the external crystal has.."
wgroup.long 0x0++0x3
line.long 0x0 "NMISRCLR,NMI status clear register"
bitfld.long 0x0 7. "FNMISUPC,Supply prewarning NMI flag" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 6. "FNMIECCC,ECC error NMI flag" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 5. "FNMIMAPC,NVM map error NMI flag" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 4. "FNMIOWDC,Oscillator watchdog NMI flag" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 3. "FNMIOTC,Overtemperature NMI flag" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 2. "FNMINVMC,NVM operation complete NMI flag" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
newline
bitfld.long 0x0 1. "FNMIPLLC,PLL NMI flag" "0: Interrupt event is not cleared,1: Interrupt event is cleared"
group.long 0xE0++0x3
line.long 0x0 "NVM_PROT_STS,NVM protection status register"
bitfld.long 0x0 14.--15. "NVMBSL,CBSL region size definition" "0: CBSL size is 4 K,1: CBSL size is 8 K,2: CBSL size is 12 K,3: CBSL size is 16 K"
newline
bitfld.long 0x0 13. "CBSL_PW,Status of CBSL region password/protection" "0: CBSL region password is not installed; CBSL..,1: CBSL region password is installed; CBSL region.."
newline
bitfld.long 0x0 12. "LIN_PW,Status of linear region password/protection" "0: Linear region password is not installed; linear..,1: Linear region password is installed; linear.."
newline
bitfld.long 0x0 11. "NL_PW,Status of non-linear region password/protection" "0: Non-linear region password is not installed;..,1: Non-linear region password is installed; linear.."
newline
bitfld.long 0x0 10. "DIS_RDUS_S0,Configuration of NVM read protection for sector 0 with EN_RD_S0 = 0" "0: Only active when nvm_read_S0_unsafe_i = 1 and..,1: Independent from nvm_read_S0_unsafe_i; also.."
newline
bitfld.long 0x0 9. "DIS_RDUS,Configuration of NVM read protection for sector 1...n with EN_RD_* = 0" "0: Only active when nvm_read_unsafe_i = 1 and not..,1: Independent from nvm_read_unsafe_i; also write.."
newline
bitfld.long 0x0 8. "EN_RD_S0,NVM read protection for sector 0" "0: The data in sector 0 can not be read over..,1: The data in sector 0 can be read over AHB-Lite.."
newline
bitfld.long 0x0 5. "EN_RD_CBSL,NVM read protection of data in CBSL region" "0: The data in region defined by NVMBSL can not be..,1: The data in region defined by NVMBSL sectors of.."
newline
bitfld.long 0x0 4. "EN_RD_LIN,NVM read protection of data in linear sectors" "0: The data in sectors of the linearly mapped area..,1: The data in sectors of the linearly mapped area.."
newline
bitfld.long 0x0 3. "EN_RD_NL,NVM read protection of data in non-linear sectors" "0: The data in sectors of the non-linearly mapped..,1: The data in sectors of the non-linearly mapped.."
newline
bitfld.long 0x0 2. "EN_PRG_CBSL,NVM protection of data in CBSL region" "0: The data in region defined by NVMBSL can not be..,1: The data in region defined by NVMBSL can be.."
newline
bitfld.long 0x0 1. "EN_PRG_LIN,NVM protection of data in linear sectors" "0: The data in sectors of the linearly mapped area..,1: The data in sectors of the linearly mapped area.."
newline
bitfld.long 0x0 0. "EN_PRG_NL,NVM protection of data in non-linear sectors" "0: The data in sectors of the non-linearly mapped..,1: The data in sectors of the non-linearly mapped.."
group.long 0xB0++0x3
line.long 0x0 "OSC_CON,OSC control register"
bitfld.long 0x0 4. "XPD,XTAL (OSC_HP) power down control" "0: XTAL (OSC_HP) is not powered down,1: XTAL (OSC_HP) is powered down"
newline
rbitfld.long 0x0 3. "OSC2L,OSC-too-low condition flag" "0: fOSC is above threshold,1: fOSC is below threshold"
newline
bitfld.long 0x0 2. "OSCWDTRST,Oscillator watchdog reset" "0: No effect,1: Reset OSC2L flag and restart the oscillator.."
newline
bitfld.long 0x0 0.--1. "OSCSS,Oscillator source select" "0: PLL internal oscillator OSC_PLL (fINT) is..,1: XTAL (fOSC from OSC_HP) is selected..,2: PLL internal oscillator OSC_PLL (fINT) is..,3: PLL internal oscillator OSC_PLL (fINT) is.."
group.long 0xE8++0x3
line.long 0x0 "P0_POCON0,Port output control register"
bitfld.long 0x0 20.--22. "P0_PDM5,P0.5 port driver mode" "0: Strong driver and sharp edge mode,1: Strong driver and medium edge mode,2: Strong driver and soft edge mode,3: Weak driver 1,4: Medium driver 1,5: Medium driver 2,6: Medium driver 3,7: Weak driver 2"
newline
bitfld.long 0x0 16.--18. "P0_PDM4,P0.4 port driver mode" "0: Strong driver and sharp edge mode,1: Strong driver and medium edge mode,2: Strong driver and soft edge mode,3: Weak driver 1,4: Medium driver 1,5: Medium driver 2,6: Medium driver 3,7: Weak driver 2"
newline
bitfld.long 0x0 12.--14. "P0_PDM3,P0.3 port driver mode" "0: Strong driver and sharp edge mode,1: Strong driver and medium edge mode,2: Strong driver and soft edge mode,3: Weak driver 1,4: Medium driver 1,5: Medium driver 2,6: Medium driver 3,7: Weak driver 2"
newline
bitfld.long 0x0 8.--10. "P0_PDM2,P0.2 port driver mode" "0: Strong driver and sharp edge mode,1: Strong driver and medium edge mode,2: Strong driver and soft edge mode,3: Weak driver 1,4: Medium driver 1,5: Medium driver 2,6: Medium driver 3,7: Weak driver 2"
newline
bitfld.long 0x0 4.--6. "P0_PDM1,P0.1 port driver mode" "0: Medium driver 1,?,?,3: Weak driver 1,4: Medium driver 2,5: Medium driver 3,6: Medium driver 4,7: Weak driver 2"
newline
bitfld.long 0x0 0.--2. "P0_PDM0,P0.0 port driver mode" "0: Medium driver 1,?,?,3: Weak driver 1,4: Medium driver 2,5: Medium driver 3,6: Medium driver 4,7: Weak driver 2"
group.long 0xF8++0x3
line.long 0x0 "P1_POCON0,Port output control register"
bitfld.long 0x0 16.--18. "P1_PDM4,P1.4 port driver mode" "0: Strong driver and sharp edge mode,1: Strong driver and medium edge mode,2: Strong driver and soft edge mode,3: Weak driver 1,4: Medium driver 1,5: Medium driver 2,6: Medium driver 3,7: Weak driver 2"
newline
bitfld.long 0x0 8.--10. "P1_PDM2,P1.2 port driver mode" "0: Medium driver 1,?,?,3: Weak driver 1,4: Medium driver 2,5: Medium driver 3,6: Medium driver 4,7: Weak driver 2"
newline
bitfld.long 0x0 4.--6. "P1_PDM1,P1.1 port driver mode" "0: Medium driver 1,?,?,3: Weak driver 1,4: Medium driver 2,5: Medium driver 3,6: Medium driver 4,7: Weak driver 2"
newline
bitfld.long 0x0 0.--2. "P1_PDM0,P1.0 port driver mode" "0: Medium driver 1,?,?,3: Weak driver 1,4: Medium driver 2,5: Medium driver 3,6: Medium driver 4,7: Weak driver 2"
group.long 0xAC++0x3
line.long 0x0 "PASSWD,Password register"
hexmask.long.byte 0x0 3.--7. 1. "PASS,Password bits"
newline
rbitfld.long 0x0 2. "PROTECT_S,Bit protection signal status bit" "0: Software is able to write to all protected bits,1: Software is unable to write to any protected bits"
newline
bitfld.long 0x0 0.--1. "PW_MODE,Bit protection scheme control bit" "0: Scheme disabled,?,?,3: Scheme enabled (default)"
group.long 0x44++0x3
line.long 0x0 "PLL_CON,PLL control register"
bitfld.long 0x0 11. "UNPROT_VCOBYP,Unprotect write access of VCO_BYP" "0,1"
newline
bitfld.long 0x0 10. "UNPROT_OSCDISC,Unprotect write access of OSC_DISC" "0,1"
newline
hexmask.long.byte 0x0 4.--7. 1. "NDIV,PLL N-divider"
newline
bitfld.long 0x0 3. "VCOBYP,PLL VCO bypass mode select" "0: Normal (or free running) operation (default),1: Prescaler mode; VCO is bypassed (PLL output.."
newline
bitfld.long 0x0 2. "OSCDISC,Oscillator disconnect" "0: Oscillator is connected to the PLL,1: Oscillator is disconnected to the PLL"
newline
bitfld.long 0x0 1. "RESLD,Restart lock detection" "0: No effect,1: Reset lock flag and restart lock detection"
newline
rbitfld.long 0x0 0. "LOCK,PLL lock status flag" "0: The frequency difference of fREF and fDIV is..,1: The frequency difference of fREF and fDIV is.."
group.long 0x60++0x3
line.long 0x0 "PMCON,Peripheral management control register"
bitfld.long 0x0 10. "T21_DIS,T21 disable request  active high" "0: T21 is in normal operation (default),1: Request to disable the T21"
newline
bitfld.long 0x0 8. "SSC2_DIS,SSC2 disable request  active high" "0: SSC is in normal operation (default),1: Request to disable the SSC"
newline
bitfld.long 0x0 4. "GPT12_DIS,General purpose timer 12 disable request  active high" "0: GPT12 is in normal operation (default),1: Request to disable the GPT12"
newline
bitfld.long 0x0 3. "T2_DIS,T2 disable request  active high" "0: T2 is in normal operation (default),1: Request to disable the T2"
newline
bitfld.long 0x0 2. "CCU6_DIS,CCU6 disable request  active high" "0: CCU6 is in normal operation (default),1: Request to disable the CCU6"
newline
bitfld.long 0x0 1. "SSC1_DIS,SSC1 disable request  active high" "0: SSC is in normal operation (default),1: Request to disable the SSC"
newline
bitfld.long 0x0 0. "ADC1_DIS,ADC1 disable request  active high" "0: ADC1 is in normal operation (default),1: Request to disable the ADC"
group.long 0x40++0x3
line.long 0x0 "PMCON0,Power mode control 0 register"
bitfld.long 0x0 3. "SD,Slow-down mode" "0: No change,1: Device goes into Slow-down mode"
newline
bitfld.long 0x0 2. "PD,Power-down mode" "0: No change,1: Device goes into Power-down mode"
newline
bitfld.long 0x0 1. "SL,Sleep mode" "0: No change,1: Device goes into Sleep mode"
newline
bitfld.long 0x0 0. "XTAL_ON,OSC_HP operation in STOP mode" "0: OSC_HP (XTAL) will be suspended by hardware in..,1: OSC_HP (XTAL) continues to operate in STOP mode.."
group.long 0x68++0x3
line.long 0x0 "RSTCON,Reset control register"
bitfld.long 0x0 7. "LOCKUP_EN,Lockup reset enable flag" "0: Lockup is disabled,1: Lockup is enabled"
newline
bitfld.long 0x0 0. "LOCKUP,Lockup flag" "0: Lockup status not active,1: Lockup status active"
group.long 0x74++0x3
line.long 0x0 "SYS_STRTUP_STS,System startup status register"
bitfld.long 0x0 2. "PG100TP_CHKS_ERR,100 TP Page checksum error" "0: Initialization of trimming parameters from NMV..,1: Initialization of trimming parameter from NMV.."
newline
bitfld.long 0x0 1. "MRAMINITSTS,Map RAM initialization status" "0: Map RAM initialization was successful,1: Map RAM initialization was not successful"
newline
bitfld.long 0x0 0. "INIT_FAIL,Initialization at startup failed" "0: No initialization error at startup,1: Initialization error at startup"
group.long 0x70++0x3
line.long 0x0 "SYSCON0,System control 0 register"
bitfld.long 0x0 6.--7. "SYSCLKSEL,System clock select" "0: The PLL clock output signal fPLL is used,1: The direct clock input from fOSC is used,2: The direct low-precision clock input from..,3: The direct input from internal oscillator.."
newline
bitfld.long 0x0 4.--5. "NVMCLKFAC,NVM access clock factor" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4"
group.long 0xF4++0x3
line.long 0x0 "TCCR,Temperature compensation control register"
bitfld.long 0x0 0.--1. "TCC,Temperature compensation control" "0: Tj: -40deg C to 0deg C,1: Tj: 0deg C to 40deg C,2: Tj: 40deg C to 80deg C,3: Tj: 80deg C to 150deg C"
group.long 0x20++0x3
line.long 0x0 "VTOR,Vector table reallocation register"
bitfld.long 0x0 0.--1. "VTOR_BYP,Vector table bypass mode" "0: VTOR is not remapped (ROM) (start address:..,1: VTOR is remapped to RAM (start address:..,2: VTOR is remapped to NVM (start address:..,3: VTOR is remapped to NVM (start address: begin of.."
group.long 0x78++0x3
line.long 0x0 "WAKECON,Wake-up interrupt control register"
bitfld.long 0x0 0. "WAKEUPEN,Wake-up interrupt enable" "0: Wake-up interrupt is disabled,1: Wake-up interrupt is enabled"
tree.end
tree "SCUPM (Power Modules)"
base ad:0x50006000
group.long 0x4++0x3
line.long 0x0 "AMCLK_CTRL,Analog module clock control register"
bitfld.long 0x0 0. "CLKWDT_PD_N,Clock watchdog power down" "0: Clock watchdog disabled,1: Clock watchdog enabled"
rgroup.long 0x0++0x3
line.long 0x0 "AMCLK_FREQ_STS,Analog module clock frequency status register"
hexmask.long.byte 0x0 8.--13. 1. "AMCLK2_FREQ,Current frequency of analog module clock 2 (TFILT_CLK)"
newline
hexmask.long.byte 0x0 0.--5. 1. "AMCLK1_FREQ,Current frequency of analog module clock system clock (MI_CLK)"
group.long 0xC++0x3
line.long 0x0 "AMCLK_TH_HYS,Analog module clock limit register"
bitfld.long 0x0 30.--31. "AMCLK2_LOW_HYS,Analog module clock 2 (TFILT_CLK) lower hysteresis" "0,1,2,3"
newline
hexmask.long.byte 0x0 24.--29. 1. "AMCLK2_LOW_TH,Analog module clock 2 (TFILT_CLK) lower limit threshold"
newline
bitfld.long 0x0 22.--23. "AMCLK2_UP_HYS,Analog module clock 2 (TFILT_CLK) upper hysteresis" "0,1,2,3"
newline
hexmask.long.byte 0x0 16.--21. 1. "AMCLK2_UP_TH,Analog module clock 2 (TFILT_CLK) upper limit threshold"
newline
bitfld.long 0x0 14.--15. "AMCLK1_LOW_HYS,Analog module clock 1 (MI_CLK) lower hysteresis" "0,1,2,3"
newline
hexmask.long.byte 0x0 8.--13. 1. "AMCLK1_LOW_TH,Analog module clock 1 (MI_CLK) lower limit threshold"
newline
bitfld.long 0x0 6.--7. "AMCLK1_UP_HYS,Analog module clock 1 (MI_CLK) upper hysteresis" "0,1,2,3"
newline
hexmask.long.byte 0x0 0.--5. 1. "AMCLK1_UP_TH,Analog module clock 1 (MI_CLK) upper limit threshold"
group.long 0x30++0x3
line.long 0x0 "PCU_CTRL_STS,Power control unit control status register"
bitfld.long 0x0 8. "LIN_VS_UV_SD_DIS,LIN module VS undervoltage transmitter shutdown" "0: Automatic shutdown for power modules in case of..,1: Automatic shutdown for power modules in case of.."
newline
bitfld.long 0x0 1. "CLKWDT_SD_DIS,Power modules clock watchdog shutdown disable" "0: Power devices will be switched off when clock..,1: Power devices will not be shut down when clock.."
group.long 0x6C++0x3
line.long 0x0 "STCALIB,System tick calibration register"
hexmask.long 0x0 0.--25. 1. "STCALIB,System tick calibration"
group.long 0x28++0x3
line.long 0x0 "SYS_IRQ_CTRL,System interrupt control register"
bitfld.long 0x0 11. "REFBG_UPTHWARN_IE,Reference voltage overvoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 10. "REFBG_LOTHWARN_IE,Reference voltage undervoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 9. "SYS_OT_IE,System overtemperature shutdown interrupt enable (leads to shutdown of system)" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 8. "SYS_OTWARN_IE,System overtemperature warning interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
group.long 0x18++0x3
line.long 0x0 "SYS_IS,System interrupt status register"
bitfld.long 0x0 25. "SYS_OT_STS,System overtemperature shutdown (ADC2  channel 6) status" "0: No status set,1: At least one status set"
newline
bitfld.long 0x0 24. "SYS_OTWARN_STS,System overtemperature pre-warning (ADC2  channel 6) status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 22. "LIN_FAIL_STS,LIN fail status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 19. "HS2_FAIL_STS,High-side driver 2 fail status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 18. "HS1_FAIL_STS,High-side driver 1 fail status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 17. "LS2_FAIL_STS,Low-side driver 2 fail status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 16. "LS1_FAIL_STS,Low-side driver 1 fail status" "0: No status set,1: At least one status set"
newline
bitfld.long 0x0 11. "REFBG_UPTHWARN_IS,8-bit ADC2 reference overvoltage (ADC2  channel 3) interrupt status" "0: No interrupt status set,1: At least one interrupt status set"
newline
bitfld.long 0x0 10. "REFBG_LOTHWARN_IS,8-bit ADC2 reference undervoltage (ADC2  channel 3) interrupt status" "0: No interrupt status set,1: At least one interrupt status set"
newline
bitfld.long 0x0 9. "SYS_OT_IS,System overtemperature shutdown (ADC2  channel 6) interrupt status" "0: No interrupt status set,1: At least one interrupt status set"
newline
bitfld.long 0x0 8. "SYS_OTWARN_IS,System overtemperature prewarning (ADC2  channel 6) interrupt status" "0: No interrupt status set,1: At least one interrupt status set"
newline
rbitfld.long 0x0 6. "LIN_FAIL_IS,LIN fail interrupt status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 3. "HS2_FAIL_IS,High-side driver 2 fail interrupt status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 2. "HS1_FAIL_IS,High-side driver 1 fail interrupt status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 1. "LS2_FAIL_IS,Low-side driver 2 fail interrupt status" "0: No status set,1: At least one status set"
newline
rbitfld.long 0x0 0. "LS1_FAIL_IS,Low-side driver 1 fail interrupt status" "0: No status set,1: At least one status set"
wgroup.long 0x14++0x3
line.long 0x0 "SYS_ISCLR,System interrupt status clear register"
bitfld.long 0x0 25. "SYS_OT_SC,System overtemperature shutdown status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 24. "SYS_OTWARN_SC,System overtemperature pre-warning status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 11. "REFBG_UPTHWARN_ISC,8-bit ADC2 reference overvoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 10. "REFBG_LOTHWARN_ISC,8-bit ADC2 reference undervoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 9. "SYS_OT_ISC,System overtemperature shutdown status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 8. "SYS_OTWARN_ISC,System overtemperature pre-warning status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
wgroup.long 0x24++0x3
line.long 0x0 "SYS_SUPPLY_IRQ_CLR,System supply interrupt status clear register"
bitfld.long 0x0 25. "VDDEXT_OV_SC,VDDEXT overvoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 24. "VDD1V5_OV_SC,VDDC overvoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 23. "VDD5V_OV_SC,VDDP overvoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 22. "VS_OV_SC,VS overvoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 21. "VBAT_OV_SC,VBAT overvoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 20. "VDDEXT_UV_SC,VDDEXT undervoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 19. "VDD1V5_UV_SC,VDDC undervoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 18. "VDD5V_UV_SC,VDDP undervoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 17. "VS_UV_SC,VS undervoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 16. "VBAT_UV_SC,VBAT undervoltage status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 9. "VDDEXT_OV_ISC,VDDEXT overvoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 8. "VDD1V5_OV_ISC,VDDC overvoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 7. "VDD5V_OV_ISC,VDDP overvoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 6. "VS_OV_ISC,VS overvoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 5. "VBAT_OV_ISC,VBAT overvoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 4. "VDDEXT_UV_ISC,VDDEXT undervoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 3. "VDD1V5_UV_ISC,VDDC undervoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 2. "VDD5V_UV_ISC,VDDP undervoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 1. "VS_UV_ISC,VS undervoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
newline
bitfld.long 0x0 0. "VBAT_UV_ISC,VBAT undervoltage interrupt status clear" "0: The interrupt status is not cleared,1: The interrupt status is cleared"
group.long 0x20++0x3
line.long 0x0 "SYS_SUPPLY_IRQ_CTRL,System supply interrupt control register"
bitfld.long 0x0 9. "VDDEXT_OV_IE,VDDEXT overvoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 8. "VDD1V5_OV_IE,VDDC overvoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 7. "VDD5V_OV_IE,VDDP overvoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 6. "VS_OV_IE,VS overvoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 5. "VBAT_OV_IE,VBAT overvoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 4. "VDDEXT_UV_IE,VDDEXT undervoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 3. "VDD1V5_UV_IE,VDDC undervoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 2. "VDD5V_UV_IE,VDDP undervoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 1. "VS_UV_IE,VS undervoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
newline
bitfld.long 0x0 0. "VBAT_UV_IE,VBAT undervoltage interrupt enable" "0: Interrupt is disabled,1: Interrupt is enabled"
group.long 0x1C++0x3
line.long 0x0 "SYS_SUPPLY_IRQ_STS,System supply interrupt status register"
bitfld.long 0x0 25. "VDDEXT_OV_STS,VDDEXT overvoltage status" "0: No overvoltage occurred,1: Overvoltage occurred"
newline
bitfld.long 0x0 24. "VDD1V5_OV_STS,VDDC overvoltage status" "0: No overvoltage occurred,1: Overvoltage occurred"
newline
bitfld.long 0x0 23. "VDD5V_OV_STS,VDDP overvoltage status" "0: No overvoltage occurred,1: Overvoltage occurred"
newline
bitfld.long 0x0 22. "VS_OV_STS,VS overvoltage status" "0: No overvoltage occurred,1: Overvoltage occurred"
newline
bitfld.long 0x0 21. "VBAT_OV_STS,VBAT overvoltage status" "0: No overvoltage occurred,1: Overvoltage occurred"
newline
bitfld.long 0x0 20. "VDDEXT_UV_STS,VDDEXT undervoltage status" "0: No undervoltage occurred,1: Undervoltage occurred"
newline
bitfld.long 0x0 19. "VDD1V5_UV_STS,VDDC undervoltage status" "0: No undervoltage occurred,1: Undervoltage occurred"
newline
bitfld.long 0x0 18. "VDD5V_UV_STS,VDDP undervoltage status" "0: No undervoltage occurred,1: Undervoltage occurred"
newline
bitfld.long 0x0 17. "VS_UV_STS,VS undervoltage status" "0: No undervoltage occurred,1: Undervoltage occurred"
newline
bitfld.long 0x0 16. "VBAT_UV_STS,VBAT undervoltage status" "0: No undervoltage occurred,1: Undervoltage occurred"
newline
bitfld.long 0x0 9. "VDDEXT_OV_IS,VDDEXT overvoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 8. "VDD1V5_OV_IS,VDDC overvoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 7. "VDD5V_OV_IS,VDDP overvoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 6. "VS_OV_IS,VS overvoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 5. "VBAT_OV_IS,VBAT overvoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 4. "VDDEXT_UV_IS,VDDEXT undervoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 3. "VDD1V5_UV_IS,VDDC undervoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 2. "VDD5V_UV_IS,VDDP undervoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 1. "VS_UV_IS,VS undervoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
newline
bitfld.long 0x0 0. "VBAT_UV_IS,VBAT undervoltage interrupt status" "0: No undervoltage interrupt occurred,1: Undervoltage interrupt occurred"
group.long 0x34++0x3
line.long 0x0 "WDT1_TRIG,WDT1 watchdog control register"
bitfld.long 0x0 6.--7. "SOWCONF,Short open window configuration" "0: Short open windows disabled,1: One successive short open window allowed,2: Two successive short open windows allowed,3: Three successive short open windows allowed"
newline
hexmask.long.byte 0x0 0.--5. 1. "WDP_SEL,Watchdog period selection and trigger"
tree.end
tree.end
tree "SSC (High-Speed Synchronous Serial Interface)"
base ad:0x0
tree "SSC1"
base ad:0x48024000
group.long 0x10++0x3
line.long 0x0 "BR,Baud-rate timer reload register"
hexmask.long.word 0x0 0.--15. 1. "BR_VALUE,Baud rate timer/reload register value"
group.long 0x4++0x3
line.long 0x0 "CON,Control register"
rbitfld.long 0x0 28. "BSY,Busy flag" "0,1"
rbitfld.long 0x0 27. "BE,Baud rate error flag" "0: Error,1: More than factor 2 or 0.5 between slave's actual.."
newline
rbitfld.long 0x0 26. "PE,Phase error flag" "0: Error,1: Received data changes around sampling clock edge"
rbitfld.long 0x0 25. "RE,Receive error flag" "0: Error,1: Reception completed before the receive buffer.."
newline
rbitfld.long 0x0 24. "TE,Transmit error flag" "0: Error,1: Transfer starts with the slave's transmit buffer.."
hexmask.long.byte 0x0 16.--19. 1. "BC,Bit count field"
newline
bitfld.long 0x0 15. "EN,Enable bit" "0: Transmission and reception disabled. Access to..,1: Transmission and reception enabled. Access to.."
bitfld.long 0x0 14. "MS,Master select" "0: Slave mode. Operate on shift clock received..,1: Master mode. Generate shift clock and output it.."
newline
bitfld.long 0x0 12. "AREN,Automatic reset enable" "0: No additional action upon a baud rate error,1: The SSC is automatically reset upon a baud rate.."
bitfld.long 0x0 11. "BEN,Baud rate error enable" "0: Baud rate errors,1: Baud rate errors"
newline
bitfld.long 0x0 10. "PEN,Phase error enable" "0: Phase errors,1: Phase errors"
bitfld.long 0x0 9. "REN,Receive error enable" "0: Receive errors,1: Receive errors"
newline
bitfld.long 0x0 8. "TEN,Transmit error enable" "0: Transmit errors,1: Transmit errors"
bitfld.long 0x0 7. "LB,Loop back control" "0: Output,1: Receive input is connected with transmit output.."
newline
bitfld.long 0x0 6. "PO,Clock polarity control" "0: Idle clock line is low leading clock edge is..,1: Idle clock line is high leading clock edge is.."
bitfld.long 0x0 5. "PH,Clock phase control" "0: Transmit data on the leading clock edge latch on..,1: Receive data on leading clock edge shift on.."
newline
bitfld.long 0x0 4. "HB,Heading control" "0: Transmit/Receive LSB first,1: Transmit/Receive MSB first"
hexmask.long.byte 0x0 0.--3. 1. "BM,Data width selection"
wgroup.long 0x14++0x3
line.long 0x0 "ISRCLR,Interrupt status register clear"
bitfld.long 0x0 11. "BECLR,Baud rate error flag clear" "0: No error clear,1: Error clear"
bitfld.long 0x0 10. "PECLR,Phase error flag clear" "0: No error clear,1: Error clear"
newline
bitfld.long 0x0 9. "RECLR,Receive error flag clear" "0: No error clear,1: Error clear"
bitfld.long 0x0 8. "TECLR,Transmit error flag clear" "0: No error clear,1: Error clear"
group.long 0x0++0x3
line.long 0x0 "PISEL,Port input select register"
bitfld.long 0x0 3. "MIS_1,Master mode input select bit 1 (master mode only)" "0: Inputs selected according to MIS_0,1: Connects to unused pins"
bitfld.long 0x0 2. "CIS,Clock input select (slave mode only)" "0: (x = 1 or 2 dependent form current SSC),1: For both SSCs"
newline
bitfld.long 0x0 1. "SIS,Slave mode input select (slave mode only)" "0: (x = 1 or 2 dependent form current SSC),1: For both SSCs"
bitfld.long 0x0 0. "MIS_0,Master mode input select bit 0 (master mode only)" "0: (x = 1 or 2 dependent form current SSC),1: For both SSCs"
rgroup.long 0xC++0x3
line.long 0x0 "RB,Receiver buffer register"
hexmask.long.word 0x0 0.--15. 1. "RB_VALUE,Receive data register value"
group.long 0x8++0x3
line.long 0x0 "TB,Transmitter buffer register"
hexmask.long.word 0x0 0.--15. 1. "TB_VALUE,Transmit data register value"
tree.end
tree "SSC2"
base ad:0x48026000
group.long 0x10++0x3
line.long 0x0 "BR,Baud-rate timer reload register"
hexmask.long.word 0x0 0.--15. 1. "BR_VALUE,Baud rate timer/reload register value"
group.long 0x4++0x3
line.long 0x0 "CON,Control register"
rbitfld.long 0x0 28. "BSY,Busy flag" "0,1"
rbitfld.long 0x0 27. "BE,Baud rate error flag" "0: Error,1: More than factor 2 or 0.5 between slave's actual.."
newline
rbitfld.long 0x0 26. "PE,Phase error flag" "0: Error,1: Received data changes around sampling clock edge"
rbitfld.long 0x0 25. "RE,Receive error flag" "0: Error,1: Reception completed before the receive buffer.."
newline
rbitfld.long 0x0 24. "TE,Transmit error flag" "0: Error,1: Transfer starts with the slave's transmit buffer.."
hexmask.long.byte 0x0 16.--19. 1. "BC,Bit count field"
newline
bitfld.long 0x0 15. "EN,Enable bit" "0: Transmission and reception disabled. Access to..,1: Transmission and reception enabled. Access to.."
bitfld.long 0x0 14. "MS,Master select" "0: Slave mode. Operate on shift clock received..,1: Master mode. Generate shift clock and output it.."
newline
bitfld.long 0x0 12. "AREN,Automatic reset enable" "0: No additional action upon a baud rate error,1: The SSC is automatically reset upon a baud rate.."
bitfld.long 0x0 11. "BEN,Baud rate error enable" "0: Baud rate errors,1: Baud rate errors"
newline
bitfld.long 0x0 10. "PEN,Phase error enable" "0: Phase errors,1: Phase errors"
bitfld.long 0x0 9. "REN,Receive error enable" "0: Receive errors,1: Receive errors"
newline
bitfld.long 0x0 8. "TEN,Transmit error enable" "0: Transmit errors,1: Transmit errors"
bitfld.long 0x0 7. "LB,Loop back control" "0: Output,1: Receive input is connected with transmit output.."
newline
bitfld.long 0x0 6. "PO,Clock polarity control" "0: Idle clock line is low leading clock edge is..,1: Idle clock line is high leading clock edge is.."
bitfld.long 0x0 5. "PH,Clock phase control" "0: Transmit data on the leading clock edge latch on..,1: Receive data on leading clock edge shift on.."
newline
bitfld.long 0x0 4. "HB,Heading control" "0: Transmit/Receive LSB first,1: Transmit/Receive MSB first"
hexmask.long.byte 0x0 0.--3. 1. "BM,Data width selection"
wgroup.long 0x14++0x3
line.long 0x0 "ISRCLR,Interrupt status register clear"
bitfld.long 0x0 11. "BECLR,Baud rate error flag clear" "0: No error clear,1: Error clear"
bitfld.long 0x0 10. "PECLR,Phase error flag clear" "0: No error clear,1: Error clear"
newline
bitfld.long 0x0 9. "RECLR,Receive error flag clear" "0: No error clear,1: Error clear"
bitfld.long 0x0 8. "TECLR,Transmit error flag clear" "0: No error clear,1: Error clear"
group.long 0x0++0x3
line.long 0x0 "PISEL,Port input select register"
bitfld.long 0x0 3. "MIS_1,Master mode input select bit 1 (master mode only)" "0: Inputs selected according to MIS_0,1: Connects to unused pins"
bitfld.long 0x0 2. "CIS,Clock input select (slave mode only)" "0: (x = 1 or 2 dependent form current SSC),1: For both SSCs"
newline
bitfld.long 0x0 1. "SIS,Slave mode input select (slave mode only)" "0: (x = 1 or 2 dependent form current SSC),1: For both SSCs"
bitfld.long 0x0 0. "MIS_0,Master mode input select bit 0 (master mode only)" "0: (x = 1 or 2 dependent form current SSC),1: For both SSCs"
rgroup.long 0xC++0x3
line.long 0x0 "RB,Receiver buffer register"
hexmask.long.word 0x0 0.--15. 1. "RB_VALUE,Receive data register value"
group.long 0x8++0x3
line.long 0x0 "TB,Transmitter buffer register"
hexmask.long.word 0x0 0.--15. 1. "TB_VALUE,Transmit data register value"
tree.end
tree.end
tree "TIMER (Timer/Counter)"
base ad:0x0
tree "TIMER2"
base ad:0x48004000
group.long 0x10++0x3
line.long 0x0 "CNT,Timer2 count register"
hexmask.long.byte 0x0 8.--15. 1. "T2H,Timer2 value"
hexmask.long.byte 0x0 0.--7. 1. "T2L,Timer2 value"
group.long 0x0++0x3
line.long 0x0 "CON,Timer2 control register"
rbitfld.long 0x0 7. "TF2,Timer2 overflow/underflow flag" "0,1"
rbitfld.long 0x0 6. "EXF2,Timer2 external flag" "0,1"
newline
bitfld.long 0x0 3. "EXEN2,Timer2 external enable control" "0: External events are disabled,1: External events are enabled in capture/reload"
bitfld.long 0x0 2. "TR2,Timer2 start/stop control" "0: Timer2,1: Timer2"
newline
bitfld.long 0x0 1. "C_T2,Timer or counter select" "0: Function selected,1: Upon negative edge at pin T2"
bitfld.long 0x0 0. "CP_RL2,Capture/reload select" "0: Upon overflow or upon negative/positive..,1: Timer2 data register contents on the.."
group.long 0x1C++0x3
line.long 0x0 "CON1,Timer2 control 1 register"
bitfld.long 0x0 1. "TF2EN,Overflow/underflow interrupt enable" "0: Overflow/underflow interrupt,1: Overflow/underflow interrupt"
bitfld.long 0x0 0. "EXF2EN,External interrupt enable" "0: External interrupt,1: External interrupt"
wgroup.long 0x18++0x3
line.long 0x0 "ICLR,Timer2 interrupt clear register"
bitfld.long 0x0 7. "TF2CLR,Overflow/underflow interrupt clear flag" "0: Overflow/underflow interrupt is not cleared,1: Overflow/underflow interrupt"
bitfld.long 0x0 6. "EXF2CLR,External interrupt clear flag" "0: External interrupt is not cleared,1: External interrupt"
group.long 0x4++0x7
line.long 0x0 "MOD,Timer2 mode register"
bitfld.long 0x0 7. "T2REGS,Edge select for Timer2 external start" "0: The falling edge at pin T2EX is selected,1: The rising edge at Pin T2EX is selected"
bitfld.long 0x0 6. "T2RHEN,Timer2 external start enable" "0: Timer2 external start is disabled,1: Timer2 external start is enabled"
newline
bitfld.long 0x0 5. "EDGESEL,Edge select in capture mode/reload mode" "0: The falling edge at Pin T2EX is selected,1: The rising edge at Pin T2EX is selected"
bitfld.long 0x0 4. "PREN,Prescaler enable" "0: Prescaler is disabled and the 2 or 12 divider..,1: Prescaler is enabled (see T2PRE bit) and the 2.."
newline
bitfld.long 0x0 1.--3. "T2PRE,Timer2 prescaler bit" "0: fT2=fSYS,1: fT2=fSYS/2,2: DfT2=fSYS/4,3: fT2=fSYS/8,4: fT2=fSYS/16,5: fT2=fSYS/32,6: fT2=fSYS/64,7: fT2=fSYS/128"
bitfld.long 0x0 0. "DCEN,Up/down counter enable" "0: Up/down counter function is disabled,1: Up/down counter function is enabled and.."
line.long 0x4 "RC,Timer2 reload/capture register"
hexmask.long.byte 0x4 8.--15. 1. "RCH2,Reload/capture value"
hexmask.long.byte 0x4 0.--7. 1. "RCL2,Reload/capture value"
tree.end
tree "TIMER21"
base ad:0x48005000
group.long 0x10++0x3
line.long 0x0 "CNT,Timer2 count register"
hexmask.long.byte 0x0 8.--15. 1. "T2H,Timer2 value"
hexmask.long.byte 0x0 0.--7. 1. "T2L,Timer2 value"
group.long 0x0++0x3
line.long 0x0 "CON,Timer2 control register"
rbitfld.long 0x0 7. "TF2,Timer2 overflow/underflow flag" "0,1"
rbitfld.long 0x0 6. "EXF2,Timer2 external flag" "0,1"
newline
bitfld.long 0x0 3. "EXEN2,Timer2 external enable control" "0: External events are disabled,1: External events are enabled in capture/reload"
bitfld.long 0x0 2. "TR2,Timer2 start/stop control" "0: Timer2,1: Timer2"
newline
bitfld.long 0x0 1. "C_T2,Timer or counter select" "0: Function selected,1: Upon negative edge at pin T2"
bitfld.long 0x0 0. "CP_RL2,Capture/reload select" "0: Upon overflow or upon negative/positive..,1: Timer2 data register contents on the.."
group.long 0x1C++0x3
line.long 0x0 "CON1,Timer2 control 1 register"
bitfld.long 0x0 1. "TF2EN,Overflow/underflow interrupt enable" "0: Overflow/underflow interrupt,1: Overflow/underflow interrupt"
bitfld.long 0x0 0. "EXF2EN,External interrupt enable" "0: External interrupt,1: External interrupt"
wgroup.long 0x18++0x3
line.long 0x0 "ICLR,Timer2 interrupt clear register"
bitfld.long 0x0 7. "TF2CLR,Overflow/underflow interrupt clear flag" "0: Overflow/underflow interrupt is not cleared,1: Overflow/underflow interrupt"
bitfld.long 0x0 6. "EXF2CLR,External interrupt clear flag" "0: External interrupt is not cleared,1: External interrupt"
group.long 0x4++0x7
line.long 0x0 "MOD,Timer2 mode register"
bitfld.long 0x0 7. "T2REGS,Edge select for Timer2 external start" "0: The falling edge at pin T2EX is selected,1: The rising edge at Pin T2EX is selected"
bitfld.long 0x0 6. "T2RHEN,Timer2 external start enable" "0: Timer2 external start is disabled,1: Timer2 external start is enabled"
newline
bitfld.long 0x0 5. "EDGESEL,Edge select in capture mode/reload mode" "0: The falling edge at Pin T2EX is selected,1: The rising edge at Pin T2EX is selected"
bitfld.long 0x0 4. "PREN,Prescaler enable" "0: Prescaler is disabled and the 2 or 12 divider..,1: Prescaler is enabled (see T2PRE bit) and the 2.."
newline
bitfld.long 0x0 1.--3. "T2PRE,Timer2 prescaler bit" "0: fT2=fSYS,1: fT2=fSYS/2,2: DfT2=fSYS/4,3: fT2=fSYS/8,4: fT2=fSYS/16,5: fT2=fSYS/32,6: fT2=fSYS/64,7: fT2=fSYS/128"
bitfld.long 0x0 0. "DCEN,Up/down counter enable" "0: Up/down counter function is disabled,1: Up/down counter function is enabled and.."
line.long 0x4 "RC,Timer2 reload/capture register"
hexmask.long.byte 0x4 8.--15. 1. "RCH2,Reload/capture value"
hexmask.long.byte 0x4 0.--7. 1. "RCL2,Reload/capture value"
tree.end
tree.end
tree "TRX (Transceiver)"
base ad:0x4801E000
group.long 0x0++0x3
line.long 0x0 "CTRL,Transceiver control register"
bitfld.long 0x0 21. "HV_MODE,Transceiver high-voltage I/O mode" "0: High-voltage mode entry disabled,1: High-voltage mode entry enabled"
rbitfld.long 0x0 13.--15. "FB_SM,Feedback signal for slope mode setting [3:1]" "0: Transceiver module not enabled,1: Low slope mode,2: Normal slope mode,3: Fast slope mode,4: Flash mode,5: Slope mode error,6: Slope mode error,7: Slope mode error"
newline
bitfld.long 0x0 11.--12. "SM,Transmitter slope mode control" "0: Normal slope mode,1: Fast slope mode,2: Low slope mode,3: Flash mode"
rbitfld.long 0x0 10. "RXD,Reveiver output signal" "0,1"
newline
bitfld.long 0x0 9. "TXD,Transmitter state (only used when HV_MODE is set)" "0: Transmitter switched on,1: Transmitter switched off"
rbitfld.long 0x0 4.--6. "MODE_FB,Transmitter feedback signals settings [2:1]" "0: Mode error,1: Transceiver Sleep mode,2: Mode error,3: Mode error,4: Mode error,5: Transceiver Receive-Only mode,6: Mode error,7: Transceiver Normal mode"
newline
bitfld.long 0x0 1.--2. "MODE,Transceiver power mode control" "0: Tranceiver module switched to Sleep mode,1: Tranceiver module switched to Receive-Only mode,?,3: Tranceiver module switched to Normal mode"
wgroup.long 0x8++0x3
line.long 0x0 "IRQCLR,Transceiver interrupt status rclear register"
bitfld.long 0x0 11. "TXD_TMOUT_SC,Transceiver TXD timeout status clear" "0: No timeout cleared,1: Timeout cleared"
bitfld.long 0x0 9. "OT_SC,Tranceiver overtemperature status clear" "0: Overtemperature not cleared,1: Overtemperature cleared"
newline
bitfld.long 0x0 8. "M_SM_ERR_SC,Transceiver mode error - slope mode error status clear" "0: Overtemperature not cleared,1: Overtemperature cleared"
bitfld.long 0x0 6. "TXD_TMOUT_ISC,Transceiver TXD timeout interrupt status clear" "0: No timeout cleared,1: Timeout cleared"
newline
bitfld.long 0x0 5. "OC_ISC,Tranceiver overcurrent interrupt status clear" "0: Overcurrent status not cleared,1: Overcurrent status cleared"
bitfld.long 0x0 4. "OT_ISC,Tranceiver overtemperature interrupt status / status clear" "0: Overtemperature not cleared,1: Overtemperature cleared"
newline
bitfld.long 0x0 3. "M_SM_ERR_ISC,Transceiver mode error - slope mode error interrupt status clear" "0: Overtemperature not cleared,1: Overtemperature cleared"
group.long 0xC++0x3
line.long 0x0 "IRQEN,Transceiver interrupt enable register"
bitfld.long 0x0 6. "TXD_TMOUT_IEN,Transceiver TxD-timeout interrupt" "0: Disabled,1: Enabled"
bitfld.long 0x0 5. "OC_IEN,Transceiver overcurrent interrupt" "0: Disabled,1: Enabled"
newline
bitfld.long 0x0 4. "OT_IEN,Transceiver overtemperature interrupt" "0: Disabled,1: Enabled"
bitfld.long 0x0 3. "M_SM_ERR_IEN,Transceiver mode error - slope mode error interrupt" "0: Disabled,1: Enabled"
group.long 0x4++0x3
line.long 0x0 "IRQS,Transceiver interrupt status register"
bitfld.long 0x0 11. "TXD_TMOUT_STS,Transceiver TXD timeout status" "0: No timeout occurred,1: Timeout occurred"
bitfld.long 0x0 9. "OT_STS,Transceiver overtemperature status" "0: No overtemperature occurred,1: Overtemperature occurred"
newline
bitfld.long 0x0 8. "M_SM_ERR_STS,Transceiver mode error - slope mode error status" "0: No mode error slope mode status occurred,1: Mode error status occurred"
bitfld.long 0x0 6. "TXD_TMOUT_IS,Transceiver TXD timeout interrupt status" "0: No timeout occurred,1: Timeout occurred"
newline
bitfld.long 0x0 5. "OC_IS,Transceiver overcurrent interrupt status" "0: No overcurrent status occurred,1: Overcurrent status occurred"
bitfld.long 0x0 4. "OT_IS,Transceiver overtemperature interrupt status" "0: No overtemperature occurred,1: Overtemperature occurred"
newline
bitfld.long 0x0 3. "M_SM_ERR_IS,Transceiver mode error - slope mode error interrupt status" "0: No mode error slope mode status occurred,1: Mode error status occurred"
tree.end
tree "UART (Universal Asynchronous Receiver/Transmitter)"
base ad:0x0
tree "UART1"
base ad:0x48020000
group.long 0x4++0x3
line.long 0x0 "SBUF,Serial data buffer register"
hexmask.long.byte 0x0 0.--7. 1. "VAL,Serial interface buffer register"
group.long 0x0++0x3
line.long 0x0 "SCON,Serial channel control register"
bitfld.long 0x0 7. "SM0,Serial port operating mode selection" "0,1"
bitfld.long 0x0 6. "SM1,Serial port operating mode selection" "0,1"
bitfld.long 0x0 5. "SM2,Enable serial port multiprocessor communication in modes 2 and 3" "0,1"
bitfld.long 0x0 4. "REN,Enable receiver of serial port" "0: Serial reception is disabled,1: Serial reception is enabled"
newline
bitfld.long 0x0 3. "TB8,Serial port transmitter bit 9" "0,1"
bitfld.long 0x0 2. "RB8,Serial port receiver bit 9" "0,1"
bitfld.long 0x0 1. "TI,Transmit interrupt flag" "0,1"
bitfld.long 0x0 0. "RI,Receive interrupt flag" "0,1"
wgroup.long 0x8++0x3
line.long 0x0 "SCONCLR,Serial channel control clear register"
bitfld.long 0x0 2. "RB8CLR,SCON.RB8 clear flag" "0: RB8 flag is not cleared,1: RB8 flag is cleared"
bitfld.long 0x0 1. "TICLR,SCON.TI clear flag" "0: TI flag is not cleared,1: TI flag is cleared"
bitfld.long 0x0 0. "RICLR,SCON.RI clear flag" "0: RI flag is not cleared,1: RI flag is cleared"
tree.end
tree "UART2"
base ad:0x48022000
group.long 0x4++0x3
line.long 0x0 "SBUF,Serial data buffer register"
hexmask.long.byte 0x0 0.--7. 1. "VAL,Serial interface buffer register"
group.long 0x0++0x3
line.long 0x0 "SCON,Serial channel control register"
bitfld.long 0x0 7. "SM0,Serial port operating mode selection" "0,1"
bitfld.long 0x0 6. "SM1,Serial port operating mode selection" "0,1"
bitfld.long 0x0 5. "SM2,Enable serial port multiprocessor communication in modes 2 and 3" "0,1"
bitfld.long 0x0 4. "REN,Enable receiver of serial port" "0: Serial reception is disabled,1: Serial reception is enabled"
newline
bitfld.long 0x0 3. "TB8,Serial port transmitter bit 9" "0,1"
bitfld.long 0x0 2. "RB8,Serial port receiver bit 9" "0,1"
bitfld.long 0x0 1. "TI,Transmit interrupt flag" "0,1"
bitfld.long 0x0 0. "RI,Receive interrupt flag" "0,1"
wgroup.long 0x8++0x3
line.long 0x0 "SCONCLR,Serial channel control clear register"
bitfld.long 0x0 2. "RB8CLR,SCON.RB8 clear flag" "0: RB8 flag is not cleared,1: RB8 flag is cleared"
bitfld.long 0x0 1. "TICLR,SCON.TI clear flag" "0: TI flag is not cleared,1: TI flag is cleared"
bitfld.long 0x0 0. "RICLR,SCON.RI clear flag" "0: RI flag is not cleared,1: RI flag is cleared"
tree.end
tree.end
AUTOINDENT.OFF