; --------------------------------------------------------------------------------
; @Title: Stratix 10 On-Chip Peripherals
; @Props: Released
; @Author: CEZ, MKO, MRO, DLI, PID, KRZ
; @Changelog: 2019-10-10 MKO
; @Manufacturer: INTEL - Intel Corporation
; @Doc: s10_5v4.pdf (Rev.5v4, 2018-12-24)
;       hpshtml_s10/hps.html
; @Core: Cortex-A53
; @Chip: STRATIX10SX
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: perstratix10.per 12992 2021-02-24 09:26:08Z pegold $

;
; Known problems:
; MODULE          REGISTER                      DESCRIPTION
; EMAC            e.g GMACGRP_FLOW_CONTROL      Field description and states given
;                                               in table often mismatch (e.g DZPQ)
; SDRAML3INT      SIDEBAND12                    Not clear description of
;                                               MR_CMD_RANK states
config 16. 8.
tree "Core Registers (Cortex-A53)"
AUTOINDENT.PUSH
AUTOINDENT.ON center tree
tree.open "AArch64"
tree "ID Registers"
rgroup.quad spr:0x30000++0x0
line.long 0x0 "MIDR_EL1,Main ID Register"
hexmask.long.byte 0x0 24.--31. 0x1 "IMPL,Implementer code"
bitfld.long 0x0 20.--23.  "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x0 16.--19.  "ARCH,Architecture" "Reserved,ARMv4,ARMv4T,ARMv5,ARMv5T,ARMv5TE,ARMv5TEJ,ARMv6,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CPUID scheme"
newline
hexmask.long.word 0x0 4.--15. 0x1 "PART,Primary Part Number"
bitfld.long 0x0 0.--3. "REV,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
if (CORENAME()=="CORTEXA57")
rgroup.quad spr:0x33001++0x0
line.long 0x0 "CTR_EL0,Cache Type Register"
bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,Reserved,PIPT"
bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
elif (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x33001++0x0
line.long 0x0 "CTR_EL0,Cache Type Register"
bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,VIPT,?..."
bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
endif
if (CORENAME()=="CORTEXA57")
rgroup.quad spr:0x30005++0x00
line.quad 0x0 "MPIDR_EL1,Multiprocessor Affinity Register"
bitfld.quad 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,?..."
bitfld.quad 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Largely independent,?..."
hexmask.quad.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field"
newline
hexmask.quad.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field"
bitfld.quad 0x00 0.--1. "CPUID,CPU ID" "1,2,3,4"
elif (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x30005++0x00
line.quad 0x0 "MPIDR_EL1,Multiprocessor Affinity Register"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity level 3. Third highest level affinity field"
newline
bitfld.quad 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,?..."
bitfld.quad 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Largely independent,?..."
hexmask.quad.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field"
newline
hexmask.quad.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field"
hexmask.quad.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. Lowest level affinity field"
endif
rgroup.quad SPR:0x30006++0x0
line.long 0x0 "REVIDR_EL1,Revision ID Register"
rgroup.quad SPR:0x30014++0x00
line.long 0x00 "ID_MMFR0_EL1,Memory Model Feature Register 0"
bitfld.long 0x00 28.--31. "IS,Indicates innermost shareability domain implemented" "Reserved,Implemented,?..."
bitfld.long 0x00 24.--27. "FCSE,Fast Context Switch Memory Mappings Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "AR,Auxiliary Register Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "TCM,TCM and Associated DMA Support" "Not supported,?..."
bitfld.long 0x00 12.--15. "SL,Shareability levels" "Reserved,Implemented 2 levels,?..."
bitfld.long 0x00 8.--11. "OSS,Outer Shareable Support" "Reserved,Implemented,?..."
newline
bitfld.long 0x00 4.--7. "PMSA,Physical Memory System Architecture (PMSA) Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "VMSA,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
rgroup.quad SPR:0x30015++0x00
line.long 0x00 "ID_MMFR1_EL1,Memory Model Feature Register 1"
bitfld.long 0x00 28.--31. "BTB,Branch Predictor" "Reserved,Reserved,Required,?..."
bitfld.long 0x00 24.--27. "L1TCO,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "L1UCMO,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 16.--19. "L1HCMO,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 12.--15. "L1UCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "L1HCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "L1UCLMOMVA,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "L1HCLMOMVA,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..."
rgroup.quad SPR:0x30016++0x00
line.long 0x00 "ID_MMFR2_EL1,Memory Model Feature Register 2"
bitfld.long 0x00 28.--31. "HAF,Hardware Access Flag Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "WFI,Wait for Interrupt Stalling Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "MBF,Memory Barrier Operations Support" "Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "UTLBMO,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "HTLBMO,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "HL1CMRO,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "HL1BPCRO,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "HL1FPCRO,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..."
rgroup.quad SPR:0x30017++0x00
line.long 0x00 "ID_MMFR3_EL1,Memory Model Feature Register 3"
bitfld.long 0x00 28.--31. "SS,Supersection support" "Supported,?..."
bitfld.long 0x00 24.--27. "CMEMSZ,Cache memory size" "Reserved,Reserved,1TByte,?..."
bitfld.long 0x00 20.--23. "CW,Coherent walk" "Reserved,Supported,Reserved,?..."
newline
bitfld.long 0x00 12.--15. "MB,Maintenance broadcast Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "BPM,Invalidate Branch predictor Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "HCMOSW,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "HCMOMVA,Invalidate Cache MVA Support" "Reserved,Supported,?..."
rgroup.quad spr:0x30026++0x00
line.long 0x00 "ID_MMFR4_EL1,Memory Model Feature Register 4"
bitfld.long 0x00 4.--7. "AC2,Extension of ACTLR and HACTLR by ACTLR2 and HACTLR2" "Not implemented,Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved"
if (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x30070++0x00
line.quad 0x00 "ID_AA64MMFR0_EL1,AArch64 Memory Model Feature Register 0"
bitfld.quad 0x00 28.--31. "4KB,4KB granule supported" "Supported,?..."
bitfld.quad 0x00 24.--27. "64KB,64KB granule supported" "Supported,?..."
bitfld.quad 0x00 20.--23. "16KB,16KB granule supported" "Not supported,?..."
newline
bitfld.quad 0x00 12.--15. "SNSMEM,Secure versus Non-secure Memory distinction" "Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "BIGEND,Mixed-endian configuration support" "Reserved,Supported,?..."
bitfld.quad 0x00 4.--7. "ASIDBITS,Number of ASID bits" "Reserved,Reserved,16 bits,?..."
newline
bitfld.quad 0x00 0.--3. "PARANGE,Physical address range supported" "Reserved,Reserved,Reserved,Reserved,44 bits/16 TB,?..."
elif (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x30070++0x00
line.quad 0x00 "ID_AA64MMFR0_EL1,AArch64 Memory Model Feature Register 0"
bitfld.quad 0x00 28.--31. "4KB,4KB granule supported" "Supported,?..."
bitfld.quad 0x00 24.--27. "64KB,64KB granule supported" "Supported,?..."
bitfld.quad 0x00 20.--23. "16KB,16KB granule supported" "Not supported,?..."
newline
bitfld.quad 0x00 12.--15. "SNSMEM,Secure versus Non-secure Memory distinction" "Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "BIGEND,Mixed-endian configuration support" "Reserved,Supported,?..."
bitfld.quad 0x00 4.--7. "ASIDBITS,Number of ASID bits" "Reserved,Reserved,16 bits,?..."
newline
bitfld.quad 0x00 0.--3. "PARANGE,Physical address range supported" "Reserved,Reserved,40 bits/1 TB,?..."
endif
if (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x30071++0x00
line.quad 0x00 "ID_AA64MMFR1_EL1,AArch64 Memory Model Feature Register 1"
endif
rgroup.quad SPR:0x30020++0x00
line.long 0x00 "ID_ISAR0_EL1,Instruction Set Attribute Register 0"
bitfld.long 0x00 24.--27. "DIVI,Divide Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "DEBI,Debug Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 16.--19. "CI,Coprocessor Instructions Support" "Not supported,?..."
newline
bitfld.long 0x00 12.--15. "CBI,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "BI,Bitfield Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "BCI,Bit Counting Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "SI,Swap Instructions Support" "Not supported,?..."
rgroup.quad SPR:0x30021++0x00
line.long 0x00 "ID_ISAR1_EL1,Instruction Set Attribute Register 1"
bitfld.long 0x00 28.--31. "JI,Jazelle Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 24.--27. "INTI,Interwork Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "IMMI,Immediate Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "ITEI,If Then Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "EXTI,Extend Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "EARI,Exception A and R Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "EXIN,Exception in ARM Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "ENDI,Endian Instructions Support" "Reserved,Supported,?..."
rgroup.quad SPR:0x30022++0x00
line.long 0x00 "ID_ISAR2_EL1,Instruction Set Attribute Register 2"
bitfld.long 0x00 28.--31. "RI,Reversal Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 24.--27. "PSRI,PSR Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "UMI,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "SMI,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "MI,Multiply Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "II,Multi-Access Interruptible Instructions Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "MHI,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "LSI,Load and Store Instructions Support" "Reserved,Reserved,Supported,?..."
rgroup.quad SPR:0x30023++0x00
line.long 0x00 "ID_ISAR3_EL1,Instruction Set Attribute Register 3"
bitfld.long 0x00 28.--31. "TEEEI,Thumb-EE Extensions Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "NOPI,True NOP Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "TCI,Thumb Copy Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "TBI,Table Branch Instructions Support" "Reserved,Supported,Reserved,?..."
bitfld.long 0x00 12.--15. "SPI,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "SVCI,SVC Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "SIMDI,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "SI,Saturate Instructions Support" "Reserved,Supported,?..."
rgroup.quad SPR:0x30024++0x00
line.long 0x00 "ID_ISAR4_EL1,Instruction Set Attribute Register 4"
bitfld.long 0x00 28.--31. "SWP_FRAC,Memory System Locking Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "PSR_M_I,PSR_M Instructions Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "SPRI,Synchronization Primitive instructions" "Supported,?..."
newline
bitfld.long 0x00 16.--19. "BI,Barrier Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SMCI,SMC Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "WBI,Write-Back Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "WSI,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "UI,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..."
rgroup.quad SPR:0x30025++0x00
line.long 0x00 "ID_ISAR5_EL1,Instruction Set Attribute Register 5"
bitfld.long 0x00 16.--19. "CRC32,CRC32 Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SHA2,SHA2 Instructions Support" "Not supported,Supported,?..."
bitfld.long 0x00 8.--11. "SHA1,SHA1 Instructions Support" "Not supported,Supported,?..."
newline
bitfld.long 0x00 4.--7. "AES,AES Instructions Support" "Not supported,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "SEVL,SEVL Instructions Support" "Reserved,Supported,?..."
rgroup.quad spr:0x30060++0x00
line.quad 0x00 "ID_AA64ISAR0_EL1,AArch64 Instruction Set Attribute Register 0"
bitfld.quad 0x00 16.--19. "CRC32,CRC32" "Reserved,Implemented,?..."
bitfld.quad 0x00 12.--15. "SHA2,SHA2 instructions are implemented" "Not implemented,Implemented,?..."
bitfld.quad 0x00 8.--11. "SHA1,SHA1 instructions are implemented" "Not implemented,Implemented,?..."
newline
bitfld.quad 0x00 4.--7. "AES,AES instructions are implemented" "Not implemented,Reserved,Implemented,?..."
if (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x30061++0x00
line.quad 0x00 "ID_AA64ISAR1_EL1,AArch64 Instruction Set Attribute Register 1"
endif
rgroup.quad SPR:0x30010++0x00
line.long 0x00 "ID_PFR0_EL1,Processor Feature Register 0"
bitfld.long 0x00 12.--15. "STATE3,Thumb Execution Environment (Thumb-EE) Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "STATE2,Support for Jazelle extension" "Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "STATE1,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "STATE0,ARM Instruction Set Support" "Reserved,Supported,?..."
rgroup.quad SPR:0x30011++0x00
line.long 0x00 "ID_PFR1_EL1,Processor Feature Register 1"
bitfld.long 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Disabled,Enabled,?..."
bitfld.long 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "VE,Virtualization Extensions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..."
bitfld.long 0x00 4.--7. "SE,Security Extensions Architecture v1 Support" "Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..."
if (CORENAME()=="CORTEXA57")
rgroup.quad spr:0x30040++0x00
line.quad 0x00 "ID_AA64PFR0_EL1,AArch64 Processor Feature Register 0"
bitfld.quad 0x00 24.--27. "GIC,GIC CPU interface" "Disabled,Enabled,?..."
bitfld.quad 0x00 20.--23. "ADVSIMD,Advanced SIMD" "Implemented,?..."
bitfld.quad 0x00 16.--19. "FP,Floating-point" "Implemented,?..."
newline
bitfld.quad 0x00 12.--15. "EL3H,EL3 exception handling" "Reserved,Reserved,AArch64/AArch32,?..."
bitfld.quad 0x00 8.--11. "EL2H,EL2 exception handling" "Reserved,Reserved,AArch64/AArch32,?..."
bitfld.quad 0x00 4.--7. "EL1H,EL1 exception handling" "Reserved,Reserved,AArch64/AArch32,?..."
newline
bitfld.quad 0x00 0.--3. "EL0H,EL0 exception handling" "Reserved,Reserved,AArch64/AArch32,?..."
elif (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x30040++0x00
line.quad 0x00 "ID_AA64PFR0_EL1,AArch64 Processor Feature Register 0"
bitfld.quad 0x00 24.--27. "GIC,GIC CPU interface" "Disabled,Enabled,?..."
bitfld.quad 0x00 20.--23. "ADVSIMD,Advanced SIMD" "Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented"
bitfld.quad 0x00 16.--19. "FP,Floating-point" "Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented"
newline
bitfld.quad 0x00 12.--15. "EL3H,EL3 exception handling" "Reserved,Reserved,AArch64/AArch32,?..."
bitfld.quad 0x00 8.--11. "EL2H,EL2 exception handling" "Reserved,Reserved,AArch64/AArch32,?..."
bitfld.quad 0x00 4.--7. "EL1H,EL1 exception handling" "Reserved,Reserved,AArch64/AArch32,?..."
newline
bitfld.quad 0x00 0.--3. "EL0H,EL0 exception handling" "Reserved,Reserved,AArch64/AArch32,?..."
endif
if (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x30041++0x00
line.quad 0x00 "ID_AA64PFR1_EL1,AArch64 Processor Feature Register 1"
endif
if (CORENAME()=="CORTEXA57")
rgroup.quad SPR:0x30012++0x00
line.long 0x00 "ID_DFR0_EL1,Debug Feature Register 0"
bitfld.long 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..."
bitfld.long 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "CDM_MM,Memory-Mapped Debug Model Support" "Not supported,?..."
bitfld.long 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
elif (CORENAME()=="CORTEXA53")
rgroup.quad SPR:0x30012++0x00
line.long 0x00 "ID_DFR0_EL1,Debug Feature Register 0"
bitfld.long 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..."
bitfld.long 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..."
bitfld.long 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
endif
rgroup.quad spr:0x30050++0x00
line.quad 0x00 "ID_AA64DFR0_EL1,AArch64 Debug Feature Register 0"
bitfld.quad 0x00 28.--31. "CTX_CMPS,Number of breakpoints that are context-aware minus 1" "Reserved,2,?..."
bitfld.quad 0x00 20.--23. "WRPS,The number of watchpoints minus 1" "Reserved,Reserved,Reserved,4,?..."
bitfld.quad 0x00 12.--15. "BRPS,The number of breakpoints minus 1" "Reserved,Reserved,Reserved,Reserved,Reserved,6,?..."
newline
bitfld.quad 0x00 8.--11. "PMUVER,Performance Monitors extension version" "Reserved,Implemented,?..."
bitfld.quad 0x00 4.--7. "TRACEVER,Trace extension" "Not implemented,?..."
bitfld.quad 0x00 0.--3. "DEBUGGER,Debug architecture version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implemented,?..."
if (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x30051++0x00
line.quad 0x00 "ID_AA64DFR1_EL1,AArch64 Debug Feature Register 1"
rgroup.quad spr:0x30054++0x00
line.quad 0x00 "ID_AA64AFR0_EL1,AArch64 Auxiliary Feature Register 0"
rgroup.quad spr:0x30055++0x00
line.quad 0x00 "ID_AA64AFR1_EL1,AArch64 Auxiliary Feature Register 1"
endif
rgroup.quad SPR:0x30013++0x00
line.long 0x00 "ID_AFR0_EL1,Auxiliary Feature Register 0"
rgroup.quad SPR:0x31007++0x00
line.long 0x00 "AIDR_EL1,Auxiliary ID Register"
rgroup.quad SPR:0x33007++0x00
line.long 0x00 "DCZID_EL0,Data Cache Zero ID"
bitfld.long 0x00 4. "DZP,Prohibit the DC ZVA instruction" "Not prohibited,Prohibited"
bitfld.long 0x00 0.--3. "BS,Block Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
tree.end
tree "System Control and Configuration"
group.quad spr:0x36111++0x00
line.quad 0x00 "SDER32_EL3,Secure Debug Enable Register"
bitfld.quad 0x00 1. "SUNIDEN,Enable non-invasive debug features in Secure User mode" "Disabled,Enabled"
bitfld.quad 0x00 0. "SUIDEN,Enable debug exceptions in Secure User mode" "Disabled,Enabled"
group.quad SPR:0x30100++0x0
line.long 0x00 "SCTLR_EL1,System Control Register (EL1)"
bitfld.long 0x0 26. "UCI,EL0 access enable (DC CVAU|DC CIVAC|DC CVAC|IC IVAU)" "Disabled,Enabled"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 24. "E0E,Endianness of explicit data access at EL0" "Little,Big"
bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x0 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x0 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x0 15. "UCT,EL0 access enable (CTR_EL0)" "Disabled,Enabled"
bitfld.long 0x0 14. "DZE,EL0 access enable (DC ZVA)" "Disabled,Enabled"
newline
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.long 0x0 9. "UMA,User Mask Access" "Disabled,Enabled"
newline
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x0 7. "ITD,IT instruction disable" "No,Yes"
newline
bitfld.long 0x00 6. "THEE,Thumb EE enable" "Disabled,Enabled"
bitfld.long 0x0 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x0 4. "SA0,EL0 stack alignment check enable" "Disabled,Enabled"
bitfld.long 0x0 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad SPR:0x34100++0x0
line.long 0x00 "SCTLR_EL2,System Control Register (EL2)"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.long 0x0 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad SPR:0x36100++0x0
line.long 0x00 "SCTLR_EL3,System Control Register (EL3)"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.long 0x0 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled"
rgroup.quad SPR:0x30101++0x0
line.long 0x00 "ACTLR_EL1,Auxiliary Control Register (EL1)"
group.quad SPR:0x34101++0x0
line.long 0x00 "ACTLR_EL2,Auxiliary Control Register (EL2)"
bitfld.long 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled"
bitfld.long 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled"
bitfld.long 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled"
group.quad SPR:0x36101++0x0
line.long 0x00 "ACTLR_EL3,Auxiliary Control Register (EL3)"
bitfld.long 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled"
bitfld.long 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled"
bitfld.long 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled"
group.quad SPR:0x30102++0x00
line.long 0x00 "CPACR_EL1,Architectural Feature Access Control Register"
bitfld.long 0x00 28. "TTA,Causes access to the Trace functionality to trap to EL1 when executed from EL0 or EL1" "Disabled,?..."
bitfld.long 0x00 20.--21. "FPEN,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution to trap to EL1 when executed from EL0 or EL1" "Trap all,Trap El0,Trap all,Not trapped"
group.quad SPR:0x36110++0x0
line.long 0x0 "SCR_EL3,Secure Configuration Register"
bitfld.long 0x00 13. "TWE,Trap WFE Instructions" "Not trapped,Trapped"
bitfld.long 0x00 12. "TWI,Trap WFI Instructions" "Not trapped,Trapped"
newline
bitfld.long 0x00 11. "ST,Enable secure EL1 access" "Disabled,Enabled"
bitfld.long 0x00 10. "RW,Register width control for lower exception levels" "AArch32,AArch64"
newline
bitfld.long 0x00 9. "SIF,Secure Instruction Fetch" "Permitted,Not permitted"
bitfld.long 0x00 8. "HCE,Hypervisor Call enable" "No,Yes"
newline
bitfld.long 0x00 7. "SMD,Secure Monitor Call disable" "No,Yes"
bitfld.long 0x00 3. "EA,External Abort  exceptions handled in Abort mode or Monitor mode" "Abort,Monitor"
newline
bitfld.long 0x00 2. "FIQ,FIQ exceptions handled in Abort mode or Monitor mode" "FIQ,Monitor"
bitfld.long 0x00 1. "IRQ,IRQ exceptions handled in Abort mode or Monitor mode" "IRQ,Monitor"
newline
bitfld.long 0x00 0. "NS,Secure mode" "Secure,Non-secure"
group.quad spr:0x34110++0x00
line.quad 0x00 "HCR_EL2,Hypervisor Configuration Register"
bitfld.quad 0x00 33. "ID,Stage 2 Instruction cache disable" "No,Yes"
bitfld.quad 0x00 32. "CD,Stage 2 Data cache disable" "No,Yes"
newline
bitfld.quad 0x00 31. "RW,Register width control for lower exception levels" "AArch32,EL1 is 64-bit"
bitfld.quad 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled"
newline
bitfld.quad 0x00 29. "HCD,Hypervisor Call Disable" "No,Yes"
bitfld.quad 0x00 28. "TDZ,Trap DC ZVA instruction" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. "TGE,Trap General Exceptions has an enhanced role when EL2 is using AArch64" "Disabled,Enabled"
bitfld.quad 0x00 26. "TVM,Trap Virtual Memory controls to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 25. "TTLB,Trap TLB maintenance instructions to EL2" "Disabled,Enabled"
bitfld.quad 0x00 24. "TPU,Trap Cache maintenance instructions to Point of Unificiation to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. "TPC,Trap Data/Unified Cache maintenance instructions to Point of Coherency tp EL2" "Disabled,Enabled"
bitfld.quad 0x00 22. "TSW,Trap Data/Unified Cache maintenance instructions by Set/Way to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 21. "TACR,Trap Auxiliary Control Register" "Disabled,Enabled"
bitfld.quad 0x00 20. "TIDCP,Trap Implementation Dependent functionality" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. "TSC,Trap SMC" "Disabled,Enabled"
bitfld.quad 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
newline
bitfld.quad 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
bitfld.quad 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
bitfld.quad 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
newline
bitfld.quad 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
bitfld.quad 0x00 12. "DC,Default Cacheable" "Disabled,Enabled"
newline
bitfld.quad 0x00 10.--11. "BSU,Barrier Shareability upgrade. determines the minimum shareability domain that is applied to any barrier executed from EL1 or EL0" "No effect,Inner Shareable,Outer Shareable,Full System"
bitfld.quad 0x00 9. "FB,Force broadcast" "Not forced,Forced"
newline
bitfld.quad 0x00 8. "VSE,Virtual System Error/Asynchronous Abort:" "No pending,Pending"
bitfld.quad 0x00 7. "VI,Virtual IRQ Interrupt" "Not pending,Pending"
newline
bitfld.quad 0x00 6. "VF,Virtual FIQ Interrupt" "Not pending,Pending"
bitfld.quad 0x00 5. "AMO,asynchronous abort and error interrupt routing" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "IMO,Physical IRQ Routing" "Disabled,Enabled"
bitfld.quad 0x00 3. "FMO,Physical FIQ Routing" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled"
bitfld.quad 0x00 1. "SWIO,Set/Way Invalidation Override" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "VM,Second stage of Translation enable" "Disabled,Enabled"
group.quad spr:0x30510++0x00
line.quad 0x00 "AFSR0_EL1,Auxiliary Fault Status Register 0 (EL1)"
group.quad spr:0x30511++0x00
line.quad 0x00 "AFSR1_EL1,Auxiliary Fault Status Register 1 (EL1)"
group.quad spr:0x34510++0x00
line.quad 0x00 "AFSR0_EL2,Auxiliary Fault Status Register 0 (EL2)"
group.quad spr:0x34511++0x00
line.quad 0x00 "AFSR1_EL2,Auxiliary Fault Status Register 1 (EL2)"
group.quad spr:0x36510++0x00
line.quad 0x00 "AFSR0_EL3,Auxiliary Fault Status Register 0 (EL3)"
group.quad spr:0x36511++0x00
line.quad 0x00 "AFSR1_EL3,Auxiliary Fault Status Register 1 (EL3)"
tree.open "Exception Syndrome Registers"
if (CORENAME()=="CORTEXA57")
if (((d.l(spr:0x30520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((d.l(spr:0x30520))&0xFC000000)==0x04000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((d.l(spr:0x30520))&0xFC000000)==(0x0C000000||0x14000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 17.--19. "Opc2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x30520))&0xFC000000)==(0x10000000||0x30000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 16.--19. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--14. "Rt2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x30520))&0xFC000000)==0x18000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.long.byte 0x00 12.--19. 1 "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--9. "Rn,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x30520))&0xFC000000)==0x1C000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((d.l(spr:0x30520))&0xFC000000)==(0x44000000||0x54000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((d.l(spr:0x30520))&0xFC000000)==0x60000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 20.--21. "Op0,Op0 value from the issued instruction" "0,1,2,3"
bitfld.long 0x00 17.--19. "Op2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 14.--16. "Op1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x30520))&0xFC000000)==(0x80000000||0x84000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/TTBR[0/1],Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort,Reserved,Reserved,Reserved,Reserved,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity,Reserved,Reserved,Reserved,Reserved,Sync. parity/1st level,Sync. parity/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Debug,?..."
elif (((d.l(spr:0x30520))&0xFD000000)==(0x91000000||0x95000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.long 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x30520))&0xFD000000)==(0x90000000||0x94000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x30520))&0xFC800000)==(0xA0800000||0xB0800000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((d.l(spr:0x30520))&0xFC800000)==(0xA0000000||0xB0000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((d.l(spr:0x30520))&0xFD000000)==0xBD000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
hexmask.long.tbyte 0x00 0.--23. 1 "IS,Additional information about the SError interrupt"
elif (((d.l(spr:0x30520))&0xFD000000)==0xBC000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((d.l(spr:0x30520))&0xFC000000)==(0xC0000000||0xC4000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x30520))&0xFC000000)==(0xC8000000||0xCC000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,EX bit valid" "Not valid,Valid"
bitfld.long 0x00 6. "EX,Exclusive operation" "No,Yes"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x30520))&0xFC000000)==(0xD0000000||0xD4000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x30520))&0xFC000000)==(0xE0000000||0xF0000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. 1 "COMMENT,Set to the instruction comment field value"
else
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
if (((d.l(spr:0x34520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000||0x4C000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((d.l(spr:0x34520))&0xFC000000)==0x04000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((d.l(spr:0x34520))&0xFC000000)==(0x0C000000||0x14000000||0x20000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 17.--19. "Opc2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x34520))&0xFC000000)==(0x10000000||0x30000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 16.--19. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--14. "Rt2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x34520))&0xFC000000)==0x18000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.long.byte 0x00 12.--19. 1 "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--9. "Rn,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x34520))&0xFC000000)==0x1C000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((d.l(spr:0x34520))&0xFC000000)==(0x44000000||0x48000000||0x54000000||0x58000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((d.l(spr:0x34520))&0xFC000000)==0x5C000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the issued SMC instruction"
elif (((d.l(spr:0x34520))&0xFC000000)==0x60000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 20.--21. "Op0,Op0 value from the issued instruction" "0,1,2,3"
bitfld.long 0x00 17.--19. "Op2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 14.--16. "Op1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x34520))&0xFC000000)==(0x80000000||0x84000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..."
elif (((d.l(spr:0x34520))&0xFD000000)==(0x91000000||0x95000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.long 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x34520))&0xFD000000)==(0x90000000||0x94000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x34520))&0xFC800000)==(0xA0800000||0xB0800000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((d.l(spr:0x34520))&0xFC800000)==(0xA0000000||0xB0000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((d.l(spr:0x34520))&0xFD000000)==0xBD000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
hexmask.long.tbyte 0x00 0.--23. 1 "IS,Additional information about the SError interrupt"
elif (((d.l(spr:0x34520))&0xFD000000)==0xBC000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((d.l(spr:0x34520))&0xFC000000)==(0xC0000000||0xC4000000||0xE8000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x34520))&0xFC000000)==(0xC8000000||0xCC000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,EX bit valid" "Not valid,Valid"
bitfld.long 0x00 6. "EX,Exclusive operation" "No,Yes"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x34520))&0xFC000000)==(0xD0000000||0xD4000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x34520))&0xFC000000)==(0xE0000000||0xF0000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
hexmask.long.word 0x00 0.--15. 1 "COMMENT,Set to the instruction comment field value"
else
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
if (((d.l(spr:0x36520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000||0x4C000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((d.l(spr:0x36520))&0xFC000000)==0x04000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((d.l(spr:0x36520))&0xFC000000)==(0x0C000000||0x14000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 17.--19. "Opc2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x36520))&0xFC000000)==(0x10000000||0x30000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 16.--19. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--14. "Rt2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x36520))&0xFC000000)==0x18000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.long.byte 0x00 12.--19. 1 "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--9. "Rn,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x36520))&0xFC000000)==0x1C000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((d.l(spr:0x36520))&0xFC000000)==(0x54000000||0x58000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((d.l(spr:0x36520))&0xFC000000)==0x5C000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the issued SMC instruction"
elif (((d.l(spr:0x36520))&0xFC000000)==0x60000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 20.--21. "Op0,Op0 value from the issued instruction" "0,1,2,3"
bitfld.long 0x00 17.--19. "Op2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 14.--16. "Op1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x36520))&0xFC000000)==0x7C000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
hexmask.long 0x00 0.--24. 1 "IMPL_DEF,Implementation defined"
elif (((d.l(spr:0x36520))&0xFC000000)==(0x80000000||0x84000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/TTBR[0/1],Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort,Reserved,Reserved,Reserved,Reserved,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity,Reserved,Reserved,Reserved,Reserved,Sync. parity/1st level,Sync. parity/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Debug,?..."
elif (((d.l(spr:0x36520))&0xFD000000)==(0x91000000||0x95000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.long 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x36520))&0xFD000000)==(0x90000000||0x94000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x36520))&0xFC800000)==0xB0800000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((d.l(spr:0x36520))&0xFC800000)==0xB0000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((d.l(spr:0x36520))&0xFD000000)==0xBD000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
hexmask.long.tbyte 0x00 0.--23. 1 "IS,Additional information about the SError interrupt"
elif (((d.l(spr:0x36520))&0xFD000000)==0xBC000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((d.l(spr:0x36520))&0xFC000000)==0xF0000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. 1 "COMMENT,Set to the instruction comment field value"
else
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
elif (CORENAME()=="CORTEXA53")
if (((d.l(spr:0x30520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((d.l(spr:0x30520))&0xFC000000)==0x04000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((d.l(spr:0x30520))&0xFC000000)==(0x0C000000||0x14000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 17.--19. "Opc2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x30520))&0xFC000000)==(0x10000000||0x30000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 16.--19. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--14. "Rt2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x30520))&0xFC000000)==0x18000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.long.byte 0x00 12.--19. 1 "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--9. "Rn,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x30520))&0xFC000000)==0x1C000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((d.l(spr:0x30520))&0xFC000000)==(0x44000000||0x54000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((d.l(spr:0x30520))&0xFC000000)==0x60000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 20.--21. "Op0,Op0 value from the issued instruction" "0,1,2,3"
bitfld.long 0x00 17.--19. "Op2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 14.--16. "Op1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x30520))&0xFC000000)==(0x80000000||0x84000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/0th level/base register,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1st level,Sync. external abort/2nd level,Sync. external abort/3rd level,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..."
elif (((d.l(spr:0x30520))&0xFD000000)==(0x91000000||0x95000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.long 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x30520))&0xFD000000)==(0x90000000||0x94000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x30520))&0xFC800000)==(0xA0800000||0xB0800000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((d.l(spr:0x30520))&0xFC800000)==(0xA0000000||0xB0000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((d.l(spr:0x30520))&0xFD000000)==0xBD000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 22.--23. "SES,System Error Source" "Processor,System,External,"
newline
hexmask.long.tbyte 0x00 0.--21. 1 "IS,Additional information about the SError interrupt"
elif (((d.l(spr:0x30520))&0xFD000000)==0xBC000000)
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((d.l(spr:0x30520))&0xFC000000)==(0xC0000000||0xC4000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x30520))&0xFC000000)==(0xC8000000||0xCC000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,EX bit valid" "Not valid,Valid"
bitfld.long 0x00 6. "EX,Exclusive operation" "No,Yes"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x30520))&0xFC000000)==(0xD0000000||0xD4000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x30520))&0xFC000000)==(0xE0000000||0xF0000000))
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. 1 "COMMENT,Set to the instruction comment field value"
else
group.quad SPR:0x30520++0x00
line.long 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
if (((d.l(spr:0x34520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000||0x4C000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((d.l(spr:0x34520))&0xFC000000)==0x04000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((d.l(spr:0x34520))&0xFC000000)==(0x0C000000||0x14000000||0x20000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 17.--19. "Opc2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x34520))&0xFC000000)==(0x10000000||0x30000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 16.--19. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--14. "Rt2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x34520))&0xFC000000)==0x18000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
hexmask.long.byte 0x00 12.--19. 1 "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--9. "Rn,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x34520))&0xFC000000)==0x1C000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((d.l(spr:0x34520))&0xFC000000)==(0x44000000||0x48000000||0x54000000||0x58000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((d.l(spr:0x34520))&0xFC000000)==0x5C000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the issued SMC instruction"
elif (((d.l(spr:0x34520))&0xFC000000)==0x60000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 20.--21. "Op0,Op0 value from the issued instruction" "0,1,2,3"
bitfld.long 0x00 17.--19. "Op2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 14.--16. "Op1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x34520))&0xFC000000)==(0x80000000||0x84000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/0th level/base register,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1st level,Sync. external abort/2nd level,Sync. external abort/3rd level,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..."
elif (((d.l(spr:0x34520))&0xFD000000)==(0x91000000||0x95000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.long 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x34520))&0xFD000000)==(0x90000000||0x94000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x34520))&0xFC800000)==(0xA0800000||0xB0800000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((d.l(spr:0x34520))&0xFC800000)==(0xA0000000||0xB0000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((d.l(spr:0x34520))&0xFD000000)==0xBD000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
hexmask.long.tbyte 0x00 0.--23. 1 "IS,Additional information about the SError interrupt"
elif (((d.l(spr:0x34520))&0xFD000000)==0xBC000000)
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((d.l(spr:0x34520))&0xFC000000)==(0xC0000000||0xC4000000||0xE8000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x34520))&0xFC000000)==(0xC8000000||0xCC000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,EX bit valid" "Not valid,Valid"
bitfld.long 0x00 6. "EX,Exclusive operation" "No,Yes"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x34520))&0xFC000000)==(0xD0000000||0xD4000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((d.l(spr:0x34520))&0xFC000000)==(0xE0000000||0xF0000000))
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. 1 "COMMENT,Set to the instruction comment field value"
else
group.quad SPR:0x34520++0x00
line.long 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
if (((d.l(spr:0x36520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000||0x4C000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((d.l(spr:0x36520))&0xFC000000)==0x04000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((d.l(spr:0x36520))&0xFC000000)==(0x0C000000||0x14000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 17.--19. "Opc2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x36520))&0xFC000000)==(0x10000000||0x30000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 16.--19. "Opc1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--14. "Rt2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x36520))&0xFC000000)==0x18000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
hexmask.long.byte 0x00 12.--19. 1 "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--9. "Rn,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x36520))&0xFC000000)==0x1C000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((d.l(spr:0x36520))&0xFC000000)==(0x54000000||0x58000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((d.l(spr:0x36520))&0xFC000000)==0x5C000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. "IMM16,The value of the immediate field from the issued SMC instruction"
elif (((d.l(spr:0x36520))&0xFC000000)==0x60000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 20.--21. "Op0,Op0 value from the issued instruction" "0,1,2,3"
bitfld.long 0x00 17.--19. "Op2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 14.--16. "Op1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--13. "CRn,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5.--9. "Rt,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRm,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((d.l(spr:0x36520))&0xFC000000)==0x7C000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long 0x00 0.--24. 1 "IMPL_DEF,Implementation defined"
elif (((d.l(spr:0x36520))&0xFC000000)==(0x80000000||0x84000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/0th level/base register,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1st level,Sync. external abort/2nd level,Sync. external abort/3rd level,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..."
elif (((d.l(spr:0x36520))&0xFD000000)==(0x91000000||0x95000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.long 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x36520))&0xFD000000)==(0x90000000||0x94000000))
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((d.l(spr:0x36520))&0xFC800000)==0xB0800000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((d.l(spr:0x36520))&0xFC800000)==0xB0000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((d.l(spr:0x36520))&0xFD000000)==0xBD000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
hexmask.long.tbyte 0x00 0.--23. 1 "IS,Additional information about the SError interrupt"
elif (((d.l(spr:0x36520))&0xFD000000)==0xBC000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((d.l(spr:0x36520))&0xFC000000)==0xF0000000)
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. 1 "COMMENT,Set to the instruction comment field value"
else
group.quad SPR:0x36520++0x00
line.long 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.long 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
endif
tree.end
newline
if (CORENAME()=="CORTEXA57")
if (((per.q(spr:0x34501))&0x200)==0x200)
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long"
newline
bitfld.quad 0x00 0.--5. "STATUS,Fault Status" "Address size/0th level/TTBR0/TTBR1,Reserved,Reserved,Reserved,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Access flag/0th level,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Permission/0th level,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Sync. external/on TTW/0th level,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity/on memory access,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/0th level,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,?..."
else
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long"
newline
bitfld.quad 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Alignment,Debug event,Access flag/1st level,Reserved,Translation/1st level,Access flag/2nd level,Translation/2nd level,Sync. external/non-translation,Domain/1st level,Reserved,Domain/2nd level,Sync. external/on TTW/1st level,Permission/1st level,Sync. external/on TTW/2nd level,Permission/2nd level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
elif (CORENAME()=="CORTEXA53")
if (((per.q(spr:0x34501))&0x200)==0x200)
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long"
newline
bitfld.quad 0x00 0.--5. "STATUS,Fault Status" "Address size/TTBR0/TTBR1,Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity/on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..."
else
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long"
newline
bitfld.quad 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Reserved,Debug event,Access flag/section,Reserved,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/on TTW/1st level,Permission/section,Sync. external/on TTW/2nd level,Permission/page,TLB conflict,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
endif
group.quad spr:0x30600++0x00
line.quad 0x00 "FAR_EL1,Fault Address Register"
group.quad spr:0x34600++0x00
line.quad 0x00 "FAR_EL2,Fault Address Register"
group.quad spr:0x36600++0x00
line.quad 0x00 "FAR_EL3,Fault Address Register"
group.quad spr:0x34604++0x00
line.quad 0x00 "HPFAR_EL2,Hypervisor IPA Fault Address Register"
group.quad spr:0x30C00++0x00
line.quad 0x00 "VBAR_EL1,Vector Base Address Register"
hexmask.quad 0x00 11.--63. 0x800 "VBA,Vector base address"
group.quad spr:0x34C00++0x00
line.quad 0x00 "VBAR_EL2,Vector Base Address Register"
hexmask.quad 0x00 11.--63. 0x800 "VBA,Vector base address"
group.quad spr:0x36C00++0x00
line.quad 0x00 "VBAR_EL3,Vector Base Address Register"
hexmask.quad 0x00 11.--63. 0x800 "VBA,Vector base address"
rgroup.quad spr:0x36C01++0x00
line.quad 0x00 "RVBAR_EL3,Reset Vector Base Address Register"
hexmask.quad 0x00 2.--43. 0x4 "RVBA,Reset Vector Base Address"
rgroup.quad SPR:0x30C10++0x00
line.long 0x00 "ISR_EL1,Interrupt Status Register"
bitfld.long 0x00 8. "A,External abort pending flag" "Not pending,Pending"
bitfld.long 0x00 7. "I,Interrupt pending flag" "Not pending,Pending"
newline
bitfld.long 0x00 6. "F,Fast interrupt pending flag" "Not pending,Pending"
group.quad SPR:0x36C02++0x00
line.long 0x00 "RMR_EL3,Reset Management Register"
bitfld.long 0x00 1. "RR,Reset Request" "Not requested,Requested"
bitfld.long 0x00 0. "AA64,Determines which execution state the processor boots into after a warmreset" "AArch32,AArch64"
if (CORENAME()=="CORTEXA57")
rgroup.quad spr:0x31F30++0x00
line.quad 0x00 "CBAR_EL1,Configuration Base Address Register"
hexmask.quad.long 0x00 18.--43. 1. "PERIPHBASE[43:18],Periphbase[43:18]"
elif (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x31F30++0x00
line.quad 0x00 "CBAR_EL1,Configuration Base Address Register"
hexmask.quad.tbyte 0x00 18.--39. 1. "PERIPHBASE[39:18],Periphbase[39:18]"
endif
group.quad spr:0x30D01++0x00
line.quad 0x00 "CONTEXTIDR_EL1,Context ID Register"
group.quad spr:0x33D02++0x00
line.quad 0x00 "TPIDR_EL0,Software Thread ID Register"
group.quad spr:0x33D03++0x00
line.quad 0x00 "TPIDRRO_EL0,Software Thread ID Register"
group.quad spr:0x30D04++0x00
line.quad 0x00 "TPIDR_EL1,Software Thread ID Register"
group.quad spr:0x34D02++0x00
line.quad 0x00 "TPIDR_EL2,Software Thread ID Register"
group.quad spr:0x36D02++0x00
line.quad 0x00 "TPIDR_EL3,Software Thread ID Register"
tree.end
tree "Memory Management Unit"
group.quad spr:0x30100++0x0
line.quad 0x00 "SCTLR_EL1,System Control Register (EL1)"
bitfld.quad 0x00 26. "UCI,EL0 access enable (DC CVAU|DC CIVAC|DC CVAC|IC IVAU)" "Disabled,Enabled"
bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.quad 0x00 24. "E0E,Endianness of explicit data access at EL0" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.quad 0x00 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.quad 0x00 15. "UCT,EL0 access enable (CTR_EL0)" "Disabled,Enabled"
bitfld.quad 0x00 14. "DZE,EL0 access enable (DC ZVA)" "Disabled,Enabled"
newline
bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.quad 0x00 9. "UMA,User Mask Access" "Disabled,Enabled"
newline
bitfld.quad 0x00 8. "SED,SETEND Disable" "No,Yes"
bitfld.quad 0x00 7. "ITD,IT instruction disable" "No,Yes"
newline
bitfld.quad 0x00 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled"
bitfld.quad 0x00 4. "SA0,EL0 stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x34100++0x0
line.quad 0x00 "SCTLR_EL2,System Control Register (EL2)"
bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x36100++0x0
line.quad 0x00 "SCTLR_EL3,System Control Register (EL3)"
bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x30200++0x00
line.quad 0x00 "TTBR0_EL1,Translation Table Base Register 0 (EL1)"
hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
group.quad spr:0x30201++0x00
line.quad 0x00 "TTBR1_EL1,Translation Table Base Register 1 (EL1)"
hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
if (CORENAME()=="CORTEXA57")
group.quad spr:0x30202++0x00
line.quad 0x00 "TCR_EL1,Translation Control Register (EL1)"
bitfld.quad 0x00 38. "TBI1,Top Byte Ignored 1" "Not ignored,Ignored"
bitfld.quad 0x00 37. "TBI0,Top Byte Ignored 0" "Not ignored,Ignored"
newline
bitfld.quad 0x00 36. "AS,ASID size" "8-bit,16-bit"
bitfld.quad 0x00 32.--34. "IPS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,42 bits/4 TB,44 bits/16 TB,48 bits/256 TB,?..."
newline
bitfld.quad 0x00 30. "TG1,TTBR1_EL1 granule size" "4 KByte,64 KByte"
bitfld.quad 0x00 28.--29. "SH1,Shareability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 26.--27. "ORGN1,Outer cacheability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 24.--25. "IRGN1,Inner cacheability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 23. "EPD1,Translation table walk disable for translations using TTBR1_EL1" "Enabled,Disabled"
bitfld.quad 0x00 22. "A1,Selects whether TTBR0_EL1 or TTBR1_EL1 defines the ASID" "TTBR0_EL1,TTBR1_EL1"
newline
bitfld.quad 0x00 16.--21. "T1SZ,Size offset of the memory region addressed by TTBR1_EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.quad 0x00 14. "TG0,TTBR0_EL1 granule size" "4 KB,64 KB"
newline
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
elif (CORENAME()=="CORTEXA53")
group.quad spr:0x30202++0x00
line.quad 0x00 "TCR_EL1,Translation Control Register (EL1)"
bitfld.quad 0x00 38. "TBI1,Top Byte Ignored 1" "Not ignored,Ignored"
bitfld.quad 0x00 37. "TBI0,Top Byte Ignored 0" "Not ignored,Ignored"
newline
bitfld.quad 0x00 36. "AS,ASID size" "8-bit,16-bit"
bitfld.quad 0x00 32.--34. "IPS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,?..."
newline
bitfld.quad 0x00 30.--31. "TG1,TTBR1_EL1 granule size" "Reserved,Reserved,4 KB,64 KB"
bitfld.quad 0x00 28.--29. "SH1,Shareability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 26.--27. "ORGN1,Outer cacheability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 24.--25. "IRGN1,Inner cacheability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 23. "EPD1,Translation table walk disable for translations using TTBR1_EL1" "Enabled,Disabled"
bitfld.quad 0x00 22. "A1,Selects whether TTBR0_EL1 or TTBR1_EL1 defines the ASID" "TTBR0_EL1,TTBR1_EL1"
newline
bitfld.quad 0x00 16.--21. "T1SZ,Size offset of the memory region addressed by TTBR1_EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.quad 0x00 14.--15. "TG0,TTBR0_EL1 granule size" "4 KB,64 KB,?..."
newline
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 7. "EPD0,Translation table walk disable for translations using TTBR0" "Enabled,Disabled"
newline
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.quad spr:0x34200++0x00
line.quad 0x00 "TTBR0_EL2,Translation Table Base Register 0 (EL2)"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
if (CORENAME()=="CORTEXA57")
group.quad spr:0x34202++0x00
line.quad 0x00 "TCR_EL2,Translation Control Register (EL2)"
bitfld.quad 0x00 20. "TBI,Top Byte Ignored" "Not ignored,Ignored"
bitfld.quad 0x00 16.--18. "PS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,42 bits/4 TB,44 bits/16 TB,48 bits/256 TB,?..."
newline
bitfld.quad 0x00 14. "TG0,TTBR0_EL2 granule size" "4 KB,64 KB"
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
elif (CORENAME()=="CORTEXA53")
group.quad spr:0x34202++0x00
line.quad 0x00 "TCR_EL2,Translation Control Register (EL2)"
bitfld.quad 0x00 20. "TBI,Top Byte Ignored" "Not ignored,Ignored"
bitfld.quad 0x00 16.--18. "PS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,?..."
newline
bitfld.quad 0x00 14.--15. "TG0,TTBR0_EL2 granule size" "4 KB,64 KB,?..."
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.quad spr:0x36200++0x00
line.quad 0x00 "TTBR0_EL3,Translation Table Base Register 0 (EL3)"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
if (CORENAME()=="CORTEXA57")
group.quad spr:0x36202++0x00
line.quad 0x00 "TCR_EL3,Translation Control Register (EL3)"
bitfld.quad 0x00 20. "TBI,Top Byte Ignored" "Not ignored,Ignored"
bitfld.quad 0x00 16.--18. "PS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,42 bits/4 TB,44 bits/16 TB,48 bits/256 TB,?..."
newline
bitfld.quad 0x00 14. "TG0,TTBR0_EL3 granule size" "4 KB,64 KB"
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
elif (CORENAME()=="CORTEXA53")
group.quad spr:0x36202++0x00
line.quad 0x00 "TCR_EL3,Translation Control Register (EL3)"
bitfld.quad 0x00 20. "TBI,Top Byte Ignored" "Not ignored,Ignored"
bitfld.quad 0x00 16.--18. "PS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,?..."
newline
bitfld.quad 0x00 14.--15. "TG0,TTBR0_EL3 granule size" "4 KB,64 KB,?..."
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.quad SPR:0x34300++0x00
line.long 0x00 "DACR32_EL2,Domain Access Control Register"
bitfld.long 0x0 30.--31. "D15,Domain Access 15" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 28.--29. "D14,Domain Access 14" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 26.--27. "D13,Domain Access 13" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 24.--25. "D12,Domain Access 12" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 22.--23. "D11,Domain Access 11" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 20.--21. "D10,Domain Access 10" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 18.--19. "D9,Domain Access 9" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 16.--17. "D8,Domain Access 8" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 14.--15. "D7,Domain Access 7" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 12.--13. "D6,Domain Access 6" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 10.--11. "D5,Domain Access 5" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 8.--9. "D4,Domain Access 4" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 6.--7. "D3,Domain Access 3" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 4.--5. "D2,Domain Access 2" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 2.--3. "D1,Domain Access 1" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 0.--1. "D0,Domain Access 0" "Denied,Client,Reserved,Manager"
if (CORENAME()=="CORTEXA57")
if (((per.q(spr:0x34501))&0x200)==0x200)
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long"
newline
bitfld.quad 0x00 0.--5. "STATUS,Fault Status" "Address size/0th level/TTBR0/TTBR1,Reserved,Reserved,Reserved,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Access flag/0th level,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Permission/0th level,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Sync. external/on TTW/0th level,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity/on memory access,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/0th level,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,?..."
else
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long"
newline
bitfld.quad 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Alignment,Debug event,Access flag/1st level,Reserved,Translation/1st level,Access flag/2nd level,Translation/2nd level,Sync. external/non-translation,Domain/1st level,Reserved,Domain/2nd level,Sync. external/on TTW/1st level,Permission/1st level,Sync. external/on TTW/2nd level,Permission/2nd level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
elif (CORENAME()=="CORTEXA53")
if (((per.q(spr:0x34501))&0x200)==0x200)
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long"
newline
bitfld.quad 0x00 0.--5. "STATUS,Fault Status" "Address size/TTBR0/TTBR1,Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity/on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..."
else
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long"
newline
bitfld.quad 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Reserved,Debug event,Access flag/section,Reserved,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/on TTW/1st level,Permission/section,Sync. external/on TTW/2nd level,Permission/page,TLB conflict,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
endif
rgroup.quad SPR:0x30510++0x00
line.long 0x00 "AFSR0_EL1,Auxiliary Fault Status Register 0 (EL1)"
rgroup.quad SPR:0x34510++0x00
line.long 0x00 "AFSR0_EL2,Auxiliary Fault Status Register 0 (EL2)"
rgroup.quad SPR:0x36510++0x00
line.long 0x00 "AFSR0_EL3,Auxiliary Fault Status Register 0 (EL3)"
rgroup.quad SPR:0x30511++0x00
line.long 0x00 "AFSR1_EL1,Auxiliary Fault Status Register 1 (EL1)"
rgroup.quad SPR:0x34511++0x00
line.long 0x00 "AFSR1_EL2,Auxiliary Fault Status Register 1 (EL2)"
rgroup.quad SPR:0x36511++0x00
line.long 0x00 "AFSR1_EL3,Auxiliary Fault Status Register 1 (EL3)"
if (((per.q(spr:0x30740))&0xF000000000000001)==0x0000000000000000)
group.quad spr:0x30740++0x00
line.quad 0x00 "PAR_EL1,Physical Address Register"
bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read"
bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "Device-nGnRnE,Reserved,Reserved,Reserved,Device-not nGnRnE,?..."
newline
hexmask.quad 0x00 12.--47. 0x10 "PA[47:12],Physical Address"
bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes"
newline
bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
elif (((per.q(spr:0x30740))&0x01)==0x00)
group.quad spr:0x30740++0x00
line.quad 0x00 "PAR_EL1,Physical Address Register"
bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read"
bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "Reserved,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read"
newline
hexmask.quad 0x00 12.--47. 0x10 "PA[47:12],Physical Address"
bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes"
newline
bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
else
group.quad spr:0x30740++0x00
line.quad 0x00 "PAR_EL1,Physical Address Register"
newline
bitfld.quad 0x00 9. "S,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2"
bitfld.quad 0x00 8. "PTW,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes"
newline
bitfld.quad 0x00 1.--6. "FST,Fault status field" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Reserved,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Atomic/AArch64,?..."
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
endif
tree.open "Memory Attribute Indirection Registers"
group.quad spr:0x30A20++0x00
line.quad 0x00 "MAIR_EL1,Memory Attribute Indirection Register (EL1)"
bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
group.quad spr:0x34A20++0x00
line.quad 0x00 "MAIR_EL2,Memory Attribute Indirection Register (EL2)"
bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
group.quad spr:0x36A20++0x00
line.quad 0x00 "MAIR_EL3,Memory Attribute Indirection Register (EL3)"
bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
newline
bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device memory,Write-through transient/Write-Allocate,Write-through transient/Read-Allocate,Write-through transient/Write-Allocate/Read-Allocate,Non-Cacheable,Write-back transient/Write-Allocate,Write-back transient/Read-Allocate,Write-back transient/Write-Allocate/Read-Allocate,Write-Through non-transient,Write-Through non-transient/Write-Allocate,Write-Through non-transient/Read-Allocate,Write-Through non-transient/Write-Allocate/Read-Allocate,Write-Back non-transient,Write-Back non-transient/Write-Allocate,Write-Back non-transient/Read-Allocate,Write-Back non-transient/Write-Allocate/Read-Allocate"
rgroup.quad spr:0x30A30++0x00
line.quad 0x00 "AMAIR_EL1,Memory Attribute Indirection Register (EL1)"
rgroup.quad spr:0x34A30++0x00
line.quad 0x00 "AMAIR_EL2,Memory Attribute Indirection Register (EL2)"
rgroup.quad spr:0x36A30++0x00
line.quad 0x00 "AMAIR_EL3,Memory Attribute Indirection Register (EL3)"
tree.end
newline
group.quad SPR:0x30D01++0x00
line.long 0x0 "CONTEXTIDR_EL1,Context ID Register"
tree.end
tree "Virtualization Extensions"
group.quad SPR:0x34000++0x0
line.long 0x0 "VPIDR_EL2,Virtualization Processor ID Register"
if (CORENAME()=="CORTEXA57")
group.quad spr:0x34005++0x00
line.quad 0x0 "VMPIDR_EL2,Virtualization Multiprocessor ID Register"
hexmask.quad.long 0x00 0.--31. 1. "VMPIDR_EL2,MPIDR value returned by Non-secure EL1 reads of the MPIDR_EL1"
elif (CORENAME()=="CORTEXA53")
group.quad spr:0x34005++0x00
line.quad 0x0 "VMPIDR_EL2,Virtualization Multiprocessor ID Register"
endif
group.quad spr:0x34100++0x0
line.quad 0x00 "SCTLR_EL2,System Control Register (EL2)"
bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x34110++0x00
line.quad 0x00 "HCR_EL2,Hypervisor Configuration Register"
bitfld.quad 0x00 33. "ID,Stage 2 Instruction cache disable" "No,Yes"
bitfld.quad 0x00 32. "CD,Stage 2 Data cache disable" "No,Yes"
newline
bitfld.quad 0x00 31. "RW,Register width control for lower exception levels" "AArch32,EL1 is 64-bit"
bitfld.quad 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled"
newline
bitfld.quad 0x00 29. "HCD,Hypervisor Call Disable" "No,Yes"
bitfld.quad 0x00 28. "TDZ,Trap DC ZVA instruction" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. "TGE,Trap General Exceptions has an enhanced role when EL2 is using AArch64" "Disabled,Enabled"
bitfld.quad 0x00 26. "TVM,Trap Virtual Memory controls to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 25. "TTLB,Trap TLB maintenance instructions to EL2" "Disabled,Enabled"
bitfld.quad 0x00 24. "TPU,Trap Cache maintenance instructions to Point of Unificiation to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. "TPC,Trap Data/Unified Cache maintenance instructions to Point of Coherency tp EL2" "Disabled,Enabled"
bitfld.quad 0x00 22. "TSW,Trap Data/Unified Cache maintenance instructions by Set/Way to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 21. "TACR,Trap Auxiliary Control Register" "Disabled,Enabled"
bitfld.quad 0x00 20. "TIDCP,Trap Implementation Dependent functionality" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. "TSC,Trap SMC" "Disabled,Enabled"
bitfld.quad 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
newline
bitfld.quad 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
bitfld.quad 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
bitfld.quad 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
newline
bitfld.quad 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
bitfld.quad 0x00 12. "DC,Default Cacheable" "Disabled,Enabled"
newline
bitfld.quad 0x00 10.--11. "BSU,Barrier Shareability upgrade. determines the minimum shareability domain that is applied to any barrier executed from EL1 or EL0" "No effect,Inner Shareable,Outer Shareable,Full System"
bitfld.quad 0x00 9. "FB,Force broadcast" "Not forced,Forced"
newline
bitfld.quad 0x00 8. "VSE,Virtual System Error/Asynchronous Abort:" "No pending,Pending"
bitfld.quad 0x00 7. "VI,Virtual IRQ Interrupt" "Not pending,Pending"
newline
bitfld.quad 0x00 6. "VF,Virtual FIQ Interrupt" "Not pending,Pending"
bitfld.quad 0x00 5. "AMO,asynchronous abort and error interrupt routing" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "IMO,Physical IRQ Routing" "Disabled,Enabled"
bitfld.quad 0x00 3. "FMO,Physical FIQ Routing" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled"
bitfld.quad 0x00 1. "SWIO,Set/Way Invalidation Override" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "VM,Second stage of Translation enable" "Disabled,Enabled"
if (CORENAME()=="CORTEXA57")
group.quad SPR:0x34111++0x00
line.long 0x00 "MDCR_EL2,Hypervisor Debug Control Register (EL2)"
bitfld.long 0x00 11. "TDRA,Trap Debug ROM Access" "No effect,Valid"
bitfld.long 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid"
bitfld.long 0x00 9. "TDA,Trap Debug Access" "No effect,Valid"
newline
bitfld.long 0x00 8. "TDE,Trap Debug Exceptions" "No effect,Valid"
bitfld.long 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid"
newline
bitfld.long 0x00 5. "TPMCR,Trap Performance Monitor Control Register accesses" "No effect,Valid"
bitfld.long 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
elif (CORENAME()=="CORTEXA53")
group.quad SPR:0x34111++0x00
line.long 0x00 "MDCR_EL2,Hypervisor Debug Control Register (EL2)"
bitfld.long 0x00 11. "TDRA,Trap Debug ROM Access" "No effect,Valid"
bitfld.long 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid"
bitfld.long 0x00 9. "TDA,Trap Debug Access" "No effect,Valid"
newline
bitfld.long 0x00 8. "TDE,Trap Debug Exceptions" "No effect,Valid"
bitfld.long 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid"
newline
bitfld.long 0x00 5. "TPMCR,Trap Performance Monitor Control Register accesses" "No effect,Valid"
bitfld.long 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters" "0,1,2,3,4,5,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6"
endif
group.quad SPR:0x34112++0x00
line.long 0x00 "CPTR_EL2,Architectural Feature Trap Register (EL2)"
bitfld.long 0x0 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped"
bitfld.long 0x0 10. "TFP,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution from a lower exception level to EL2" "Not trapped,Trapped"
group.quad SPR:0x36131++0x00
line.long 0x00 "MDCR_EL3,Hypervisor Debug Control Register (EL3)"
bitfld.long 0x00 21. "EPMAD,External debugger access to Performance Monitors registers disabled" "No,Yes"
bitfld.long 0x00 20. "EDAD,External debugger access to breakpoint and watchpoint registers disabled" "No,Yes"
bitfld.long 0x00 17. "SPME,Secure performance monitors enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "SDD,AArch64 secure debug disable" "No,Yes"
bitfld.long 0x00 14.--15. "SPD32,AArch32 secure privileged debug" "Legacy,Reserved,Disabled,Enabled"
bitfld.long 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid"
newline
bitfld.long 0x00 9. "TDA,Trap Debug Access" "No effect,Valid"
bitfld.long 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid"
group.quad SPR:0x36112++0x00
line.long 0x00 "CPTR_EL3,Architectural Feature Trap Register (EL3)"
bitfld.long 0x0 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped"
bitfld.long 0x0 10. "TFP,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution from a lower exception level to EL2" "Not trapped,Trapped"
group.quad SPR:0x34113++0x00
line.long 0x00 "HSTR_EL2,Hypervisor System Trap Register"
bitfld.long 0x00 16. "TTEE,Trap ThumbEE" "Not supported,?..."
bitfld.long 0x00 15. "T15,Trap coprocessor primary register CRn = 15" "No effect,Trapped"
bitfld.long 0x00 13. "T13,Trap coprocessor primary register CRn = 13" "No effect,Trapped"
newline
bitfld.long 0x00 12. "T12,Trap coprocessor primary register CRn = 12" "No effect,Trapped"
bitfld.long 0x00 11. "T11,Trap coprocessor primary register CRn = 11" "No effect,Trapped"
bitfld.long 0x00 10. "T10,Trap coprocessor primary register CRn = 10" "No effect,Trapped"
newline
bitfld.long 0x00 9. "T9,Trap coprocessor primary register CRn = 9" "No effect,Trapped"
bitfld.long 0x00 8. "T8,Trap coprocessor primary register CRn = 8" "No effect,Trapped"
bitfld.long 0x00 7. "T7,Trap coprocessor primary register CRn = 7" "No effect,Trapped"
newline
bitfld.long 0x00 6. "T6,Trap coprocessor primary register CRn = 6" "No effect,Trapped"
bitfld.long 0x00 5. "T5,Trap coprocessor primary register CRn = 5" "No effect,Trapped"
bitfld.long 0x00 3. "T3,Trap coprocessor primary register CRn = 3" "No effect,Trapped"
newline
bitfld.long 0x00 2. "T2,Trap coprocessor primary register CRn = 2" "No effect,Trapped"
bitfld.long 0x00 1. "T1,Trap coprocessor primary register CRn = 1" "No effect,Trapped"
bitfld.long 0x00 0. "T0,Trap coprocessor primary register CRn = 0" "No effect,Trapped"
rgroup.quad SPR:0x34117++0x00
line.long 0x00 "HACR_EL2,Hypervisor Auxiliary Configuration Register"
group.quad spr:0x34210++0x00
line.quad 0x00 "VTTBR_EL2,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,VMID for the translation table"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
if (CORENAME()=="CORTEXA57")
group.quad SPR:0x34212++0x00
line.long 0x00 "VTCR_EL2,Virtualization Translation Control Register"
bitfld.long 0x00 16.--18. "PS,Physical Address Size" "32 bits/4GB,36 bits/64GB,40 bits/1TB,42 bits/4TB,44 bits/16TB,48 bits/256TB,?..."
bitfld.long 0x00 14. "TG0,Granule size for the corresponding translation table base address register" "4 KB,64 KB"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using VTTBR" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using VTTBR" "0,1,2,3"
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks VTTBR" "0,1,2,3"
bitfld.long 0x00 6.--7. "SL0,Starting Level for VTCR addressed region" "0,1,2,3"
newline
bitfld.long 0x00 0.--5. "T0SZ,The Size offset of the VTCR addressed region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
elif (CORENAME()=="CORTEXA53")
group.quad SPR:0x34212++0x00
line.long 0x00 "VTCR_EL2,Virtualization Translation Control Register"
bitfld.long 0x00 16.--18. "PS,Physical Address Size" "32 bits/4GB,36 bits/64GB,40 bits/1TB,?..."
bitfld.long 0x00 14.--15. "TG0,Granule size for the corresponding translation table base address register" "4 KB,64 KB,?..."
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using VTTBR" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using VTTBR" "0,1,2,3"
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks VTTBR" "0,1,2,3"
bitfld.long 0x00 6.--7. "SL0,Starting Level for VTCR addressed region" "0,1,2,3"
newline
bitfld.long 0x00 0.--5. "T0SZ,The Size offset of the VTCR addressed region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.quad spr:0x34604++0x00
line.quad 0x00 "HPFAR_EL2,Hypervisor IPA Fault Address Register"
hexmask.quad 0x00 4.--39. 0x10 "FIPA,Faulting IPA bits"
tree.end
tree "Cache Control and Configuration"
if (CORENAME()=="CORTEXA57")
rgroup.quad spr:0x33001++0x0
line.long 0x0 "CTR_EL0,Cache Type Register"
bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,Reserved,PIPT"
bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
elif (CORENAME()=="CORTEXA53")
rgroup.quad spr:0x33001++0x0
line.long 0x0 "CTR_EL0,Cache Type Register"
bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,VIPT,?..."
bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
endif
group.quad SPR:0x32000++0x0
line.long 0x0 "CSSELR_EL1,Cache Size Selection Register"
bitfld.long 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,?..."
bitfld.long 0x00 0. "IND,Instruction/Not Data" "Data/Unified,Instruction"
if (CORENAME()=="CORTEXA57")
rgroup.quad SPR:0x31001++0x0
line.long 0x0 "CLIDR_EL1,Cache Level ID Register"
bitfld.long 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Reserved,Level 1,?..."
bitfld.long 0x00 24.--26. "LOC,Level of Coherency" "Reserved,Reserved,Level 3,?..."
bitfld.long 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Reserved,Level 2,?..."
newline
bitfld.long 0x00 18.--20. "CTYPE7,Cache type for levels 7" "No cache,?..."
bitfld.long 0x00 15.--17. "CTYPE6,Cache type for levels 6" "No cache,?..."
bitfld.long 0x00 12.--14. "CTYPE5,Cache type for levels 5" "No cache,?..."
newline
bitfld.long 0x00 9.--11. "CTYPE4,Cache type for levels 4" "No cache,?..."
bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..."
bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "Reserved,Reserved,Reserved,Reserved,Unified,?..."
newline
bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate Inst/Data,?..."
rgroup.quad SPR:0x31000++0x0
line.long 0x0 "CCSIDR_EL1,Current Cache Size ID Register"
bitfld.long 0x00 31. "WT,Write-Through" "Not Supported,?..."
bitfld.long 0x00 30. "WB,Write-Back" "Not Supported,Supported"
bitfld.long 0x00 29. "RA,Read-Allocate" "Reserved,Supported"
newline
bitfld.long 0x00 28. "WA,Write-Allocate" "Not Supported,Supported"
hexmask.long.word 0x00 13.--27. 1. 1. "SETS,Number of Sets"
hexmask.long.word 0x00 3.--12. 1. 1. "ASSOC,Associativity"
newline
bitfld.long 0x00 0.--2. "LSIZE,Line Size" "Reserved,Reserved,64 bytes,?..."
elif (CORENAME()=="CORTEXA53")
rgroup.quad SPR:0x31001++0x0
line.long 0x0 "CLIDR_EL1,Cache Level ID Register"
bitfld.long 0x00 30.--31. "ICB,Inner cache boundary" "Not disclosed,?..."
bitfld.long 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Reserved,Level 1,?..."
bitfld.long 0x00 24.--26. "LOC,Level of Coherency" "Reserved,L1,L1/L2,?..."
newline
bitfld.long 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Reserved,Level 1,?..."
bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..."
bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "No cache,Reserved,Reserved,Reserved,Unified,?..."
newline
bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate Inst/Data,?..."
rgroup.quad SPR:0x31000++0x0
line.long 0x0 "CCSIDR_EL1,Current Cache Size ID Register"
bitfld.long 0x00 31. "WT,Write-Through" "Not Supported,?..."
bitfld.long 0x00 30. "WB,Write-Back" "Not Supported,Supported"
bitfld.long 0x00 29. "RA,Read-Allocate" "Not Supported,Supported"
newline
bitfld.long 0x00 28. "WA,Write-Allocate" "Not Supported,Supported"
hexmask.long.word 0x00 13.--27. 1. 1. "SETS,Number of Sets"
hexmask.long.word 0x00 3.--12. 1. 1. "ASSOC,Associativity"
newline
bitfld.long 0x00 0.--2. "LSIZE,Line Size" "1Reserved,Reserved,64 bytes,?..."
endif
tree "Level 1 memory system"
if (CORENAME()=="CORTEXA57")
group.quad SPR:0x30F10++0x00
line.long 0x00 "DL1DATA0_EL1,Data L1 Data 0 Register"
group.quad SPR:0x30F11++0x00
line.long 0x00 "DL1DATA1_EL1,Data L1 Data 1 Register"
group.quad SPR:0x30F12++0x00
line.long 0x00 "DL1DATA2_EL1,Data L1 Data 2 Register"
group.quad SPR:0x30F13++0x00
line.long 0x00 "DL1DATA3_EL1,Data L1 Data 3 Register"
group.quad SPR:0x30F00++0x00
line.long 0x00 "IL1DATA0_EL1,Instruction L1 Data 0 Register"
group.quad SPR:0x30F01++0x00
line.long 0x00 "IL1DATA1_EL1,Instruction L1 Data 1 Register"
group.quad SPR:0x30F02++0x00
line.long 0x00 "IL1DATA2_EL1,Instruction L1 Data 2 Register"
group.quad SPR:0x30F03++0x00
line.long 0x00 "IL1DATA3_EL1,Instruction L1 Data 3 Register"
group.quad spr:0x31F20++0x00
line.quad 0x00 "CPUACTLR_EL1,CPU Auxiliary Control Register"
bitfld.quad 0x00 63. "FPRCGEC,Force processor RCG enables active" "Not forced,Forced"
bitfld.quad 0x00 59. "DLPDMB,Disable load pass DMB" "No,Yes"
bitfld.quad 0x00 58. "DDMBN,Disable DMB nullification" "No,Yes"
newline
bitfld.quad 0x00 57. "TA,Treat DMB st/stand DMB ld/allas DMB all/all" "Disabled,Enabled"
bitfld.quad 0x00 56. "DL1DCHP,Disable L1 Data Cache hardware prefetcher" "No,Yes"
bitfld.quad 0x00 55. "DLPS,Disable load pass store" "No,Yes"
newline
bitfld.quad 0x00 54. "TGRE,Treat GRE/nGRE as nGnRE" "Disabled,Enabled"
bitfld.quad 0x00 53. "TDMBADSB,Treat DMBand DSBas if their domain field is SY" "Disabled,Enabled"
bitfld.quad 0x00 52. "DORFLDNPI,Disable over-read from LDNP instruction" "No,Yes"
newline
bitfld.quad 0x00 51. "DCDAFEMP,Disable contention detection and fast exclusive monitor path" "No,Yes"
bitfld.quad 0x00 50. "DSSONNCGREEMT,Disable store streaming on NC/GRE memory type" "No,Yes"
bitfld.quad 0x00 49. "DNHOWBNAMT,Disable non-allocate hint of Write-Back No-Allocate (WBNA) memory type" "No,Yes"
newline
bitfld.quad 0x00 48. "DESRAFLSTL2,Disable early speculative read access from LS to L2" "No,Yes"
bitfld.quad 0x00 47. "DL1L2HP,Disable L1/L2 hardware prefetch across 4KB page boundary even if page is 64KB or larger" "No,Yes"
bitfld.quad 0x00 44. "EDCCADCCI,Enable data cache clean as data cache clean/invalidate" "Disabled,Enabled"
newline
bitfld.quad 0x00 39. "DIM,Disable instruction merging" "No,Yes"
bitfld.quad 0x00 38. "FFPSCRWF,Force FPSCR write flush" "Not forced,Forced"
bitfld.quad 0x00 37. "DIGS,Disable instruction group split" "No,Yes"
newline
bitfld.quad 0x00 36. "FIDSBONASBE,Force implicit DSB on an ISB event" "Not forced,Forced"
bitfld.quad 0x00 34. "DSBP,Disable Static Branch Predictor" "No,Yes"
bitfld.quad 0x00 33. "DL1ICWPIMBTB,Disable L1 Instruction Cache way prediction in micro-BTB" "No,Yes"
newline
bitfld.quad 0x00 32. "DL1ICP,Disable L1 Instruction Cache prefetch" "No,Yes"
bitfld.quad 0x00 31. "SDEH,Snoop-delayed exclusive handling" "Disabled,Enabled"
bitfld.quad 0x00 30. "FMCEA,Force main clock enable active" "Not forced,Forced"
newline
bitfld.quad 0x00 29. "FASIMDFPCEA,Force Advanced SIMD and floating-point clock enable active" "Disabled,Enabled"
bitfld.quad 0x00 27.--28. "WSNAT,Write streaming no-allocate threshold" "12th,128th,512th,Disabled"
bitfld.quad 0x00 25.--26. "WSNL1AT,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled"
newline
bitfld.quad 0x00 24. "NCSE,Non-cacheable streaming enhancement" "Disabled,Enabled"
bitfld.quad 0x00 23. "FIORTTSSAW,Force in-order requests to the same set and way" "Not forced,Forced"
bitfld.quad 0x00 22. "FIOLI,Force in-order load issue" "Not forced,Forced"
newline
bitfld.quad 0x00 21. "DL2TLBP,Disable L2 TLB prefetching" "No,Yes"
bitfld.quad 0x00 20. "DL2TTWIPAPAC,Disable L2 translation table walk IPA PA cache" "No,Yes"
bitfld.quad 0x00 19. "DL2S1TTWC,Disable L2 stage 1 translation table walk cache" "No,Yes"
newline
bitfld.quad 0x00 18. "DL2S1TTWL2PAC,Disable L2 stage 1 translation table walk L2 PA cache" "No,Yes"
bitfld.quad 0x00 17. "DL2TLBPO,Disable L2 TLB performance optimization" "No,Yes"
bitfld.quad 0x00 16. "EFSOADLR,Enable full Strongly-ordered and Device load replay" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "FIOIIBEU,Force in-order issue in branch execute unit" "Not forced,Forced"
bitfld.quad 0x00 14. "FLOFOIGCDAPC,Force limit of one instruction group commit/de-allocate per cycle" "Not forced,Forced"
bitfld.quad 0x00 13. "FASPRW,Flush after Special Purpose Register (SPR) writes" "Disabled,Enabled"
newline
bitfld.quad 0x00 12. "FPOSPRS,Force push of SPRs" "Disabled,Enabled"
bitfld.quad 0x00 11. "LTOIPIG,Limit to one instruction per instruction group" "Disabled,Enabled"
bitfld.quad 0x00 10. "FSAEIG,Force serialization after each instruction group" "Not forced,Forced"
newline
bitfld.quad 0x00 9. "DFRO,Disable flag renaming optimization" "No,Yes"
bitfld.quad 0x00 8. "EWFIIAANOPI,Execute WFI instruction as a NOP instruction" "Disabled,Enabled"
bitfld.quad 0x00 7. "EWFEIAANOPI,Execute WFE instruction as a NOP instruction" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "EPLDPLDWIASNOP,Execute PLDand PLDWinstructions as a NOP" "Disabled,Enabled"
bitfld.quad 0x00 4. "DIP,Disable indirect predictor" "No,Yes"
bitfld.quad 0x00 3. "DMBTB,Disable micro-BTB" "No,Yes"
newline
bitfld.quad 0x00 1. "DICMS,Disable Instruction Cache miss streaming" "No,Yes"
bitfld.quad 0x00 0. "EIOBTB,Enable invalidates of BTB" "Disabled,Enabled"
group.quad spr:0x31F21++0x00
line.quad 0x00 "CPUECTLR_EL1,CPU Extended Control Register"
bitfld.quad 0x00 38. "DTWDAP,Disable table walk descriptor access prefetch" "No,Yes"
bitfld.quad 0x00 35.--36. "L2IFPD,L2 instruction fetch prefetch distance" "0 lines,1 line,2 lines,3 lines"
bitfld.quad 0x00 32.--33. "L2LSDPD,L2 load/store data prefetch distance" "0 line,2 lines,4 lines,8 lines"
newline
bitfld.quad 0x00 6. "SMPEN,Enable hardware management of data coherency with other processors in the multiprocessor" "Disabled,Enabled"
bitfld.quad 0x00 3.--5. "FPRETCTL,Advanced SIMD and Floating-point retention control" "2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks,?..."
bitfld.quad 0x00 0.--2. "CPURETCTL,CPU retention control" "2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks,?..."
elif (CORENAME()=="CORTEXA53")
group.quad spr:0x31F20++0x00
line.quad 0x00 "CPUACTLR_EL1,CPU Auxiliary Control Register"
bitfld.quad 0x00 44. "ENDCCASCI,Enable data cache clean as data cache clean/invalidate" "Disabled,Enabled"
bitfld.quad 0x00 30. "FPDIDIS,Disable floating-point dual issue" "No,Yes"
bitfld.quad 0x00 29. "DIDIS,Disable Dual Issue" "No,Yes"
newline
bitfld.quad 0x00 27.--28. "RADIS,Write streaming no-allocate threshold" "16th,128th,512th,Disabled"
bitfld.quad 0x00 25.--26. "L1RADIS,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled"
bitfld.quad 0x00 24. "DTAH,Disable Transient allocation hint" "No,Yes"
newline
bitfld.quad 0x00 23. "STBPFRS,Disable ReadUnique request for prefetch streams initiated by STB accesses" "No,Yes"
bitfld.quad 0x00 22. "STBPFDIS,Disable prefetch streams initiated from STB accesses" "No,Yes"
bitfld.quad 0x00 21. "IFUTHDIS,IFU fetch throttle disabled" "No,Yes"
newline
bitfld.quad 0x00 19.--20. "NPFSTRM,Number of independent data prefetch streams" "1 stream,2 streams,3 streams,4 streams"
bitfld.quad 0x00 18. "DSTDIS,Enable device split throttle" "Disabled,Enabled"
bitfld.quad 0x00 17. "STRIDE,Enable stride detection" "Disabled,Enabled"
newline
bitfld.quad 0x00 13.--15. "L1PCTL,L1 Data prefetch control" "Disabled,1,2,3,4,5,6,8"
bitfld.quad 0x00 10. "DODMBS,Disable optimized Data Memory Barrier behavior" "No,Yes"
bitfld.quad 0x00 6. "L1DEIEN,L1 D-cache data RAM error injection enable" "Disabled,Enabled"
group.quad spr:0x31F21++0x00
line.quad 0x00 "CPUECTLR_EL1,CPU Extended Control Register"
bitfld.quad 0x00 6. "SMPEN,Enable hardware management of data coherency with other processors in the multiprocessor" "Disabled,Enabled"
bitfld.quad 0x00 3.--5. "FPRETCTL,Advanced SIMD and Floating-point retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
bitfld.quad 0x00 0.--2. "CPURETCTL,CPU retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
endif
if (CORENAME()=="CORTEXA57")
group.quad spr:0x31F22++0x00
line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
newline
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--22. "B/W,Bank/Way" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.quad.tbyte 0x00 0.--17. 1. "INDEX,RAM address"
elif (CORENAME()=="CORTEXA53")
group.quad spr:0x31F22++0x00
line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
newline
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "0,1,2,3,4,5,6,7"
newline
hexmask.quad.word 0x00 0.--11. 1. "RAD,RAM address"
endif
tree.end
tree "Level 2 memory system"
if (CORENAME()=="CORTEXA57")
group.quad SPR:0x31B02++0x0
line.long 0x00 "L2CTLR_EL1,L2 Control Register"
bitfld.long 0x00 31. "L2RSTDM,L2RSTDISABLE monitor" "No,Yes"
bitfld.long 0x00 24.--25. "NCPU,Number of CPU" "1,2,3,4"
rbitfld.long 0x00 22. "CPUCP,CPU Cache Protection" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "SCUL2CP,SCU-L2 Cache Protection" "Disabled,Enabled"
bitfld.long 0x00 20. "DIECCE,Data inline ECC enable" "Disabled,Enabled"
rbitfld.long 0x00 13. "L2AS,L2 arbitration slice" "Not presented,Presented"
newline
rbitfld.long 0x00 12. "L2TRAMS,L2 Tag RAM slice" "Not presented,Presented"
rbitfld.long 0x00 10.--11. "L2DRAMS,L2 Data RAM slice" "Not presented,1,2,?..."
bitfld.long 0x00 9. "L2TRAMS,L2 Tag RAM setup" "0 cycle,1 cycle"
newline
bitfld.long 0x00 6.--8. "L2TRAML,L2 Tag RAM latency" "2 cycles,2 cycles,3 cycles,4 cycles,5 cycles,5 cycles,5 cycles,5 cycles"
rbitfld.long 0x00 5. "DRAMIL,L2 data RAM input latency" "1 cycle,2 cycle"
bitfld.long 0x00 0.--2. "DRAML,L2 data RAM latency" "2 cycles,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,7 cycles,8 cycles"
group.quad SPR:0x31B03++0x0
line.long 0x00 "L2ECTLR_EL1,L2 Extended Control Register"
bitfld.long 0x00 30. "L2INTASYNCERR,L2 internal asynchronous error" "No error,Error"
bitfld.long 0x00 29. "AXIASYNCERR,AXI asynchronous error" "No error,Error"
bitfld.long 0x00 0.--2. "L2DRC,L2 dynamic retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.quad SPR:0x31F00++0x00
line.long 0x00 "L2ACTLR_EL1,L2 Auxiliary Control Register"
bitfld.long 0x00 28. "FL2TBCEA,Force L2 tag bank clock enable active" "Disabled,Enabled"
bitfld.long 0x00 27. "FL2LCEA,Force L2 logic clock enable active" "Disabled,Enabled"
bitfld.long 0x00 26. "FL2GICRCGEA,Forces L2, GIC CPU interface, and Timer Regional Clock Gate(RCG) enables active" "Not forced,Forced"
newline
bitfld.long 0x00 25. "ESIAA,Enables single issue across all tag banks when the L2 arbitration replay threshold is reached" "Disabled,Enabled"
bitfld.long 0x00 23. "DPRFRUT,Disables prefetch requests from ReadUnique transactions" "No,Yes"
bitfld.long 0x00 22. "DDTLSPR,Disable dynamic throttling of load/store prefetch requests" "No,Yes"
newline
bitfld.long 0x00 20.--21. "DTL2PRFEQOC,Disable throttling of L2 prefetch requests based on Fill/Evict Queue(FEQ) occupancy count" "12,10,8,Disabled"
bitfld.long 0x00 18.--19. "DLASQ,Disable limit on NC/SO/Dev stores in Address Sequence Queue" "12 entries,10 entries,8 entries,No limit"
bitfld.long 0x00 17. "DL2RRA,Disable L2 round-robin arbitration that only clocks through paths with an active requestor waiting to be arbitrated" "No,Yes"
newline
bitfld.long 0x00 16. "ERTSI,Enable replay threshold single issue" "Disabled,Enabled"
bitfld.long 0x00 15. "DFFD,Disable fast forwarding of data from ACE or CHI to LS and IF" "No,Yes"
bitfld.long 0x00 14. "EUCE,Enables UniqueClean evictions with data" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "DCEO,Disable clean evict optimization" "No,Yes"
bitfld.long 0x00 11. "DDSB,Disable DSB with no DVM synchronization" "No,Yes"
bitfld.long 0x00 10. "DNSDAR,Disable Non-secure debug array read" "No,Yes"
newline
bitfld.long 0x00 8. "DDVMCMOMB,Disable DVM and cache maintenance operation message broadcast" "No,Yes"
bitfld.long 0x00 7. "EHDT,Enable hazard detect timeout" "Disabled,Enabled"
bitfld.long 0x00 6. "DACESCHIST,Disable ACE shareable or CHI snoopable transactions from master" "No,Yes"
newline
bitfld.long 0x00 4. "DWUWLUTFM,Disable WriteUnique and WriteLineUnique transactions from master" "Disabled,Enabled"
bitfld.long 0x00 3. "DCEPTE,Disables clean/evict push to external" "No,Yes"
bitfld.long 0x00 2. "LTORPTB,Limit to one request per tag bank" "Normal,Limited"
newline
bitfld.long 0x00 1. "EARTT,Enable arbitration replay threshold timeout" "Disabled,Enabled"
bitfld.long 0x00 0. "DHPF,Disable hardware prefetch forwarding" "No,Yes"
group.quad spr:0x31F23++0x00
line.quad 0x00 "L2MERRSR_EL1,L2 Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
newline
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--21. "C/W,CPUID/Way" "CPU0 tag way 0,CPU0 tag way 1,CPU1 tag way 0,CPU1 tag way 1,CPU2 tag way 0,CPU2 tag way 1,CPU3 tag way 0,CPU3 tag way 1,?..."
newline
hexmask.quad.tbyte 0x00 0.--17. 1. "IND,Index"
elif (CORENAME()=="CORTEXA53")
group.quad SPR:0x31B02++0x0
line.long 0x00 "L2CTLR_EL1,L2 Control Register"
bitfld.long 0x00 24.--25. "NCPU,Number of CPU" "1,2,3,4"
bitfld.long 0x00 22. "CPUCP,CPU Cache Protection" "Disabled,Enabled"
rbitfld.long 0x00 21. "SCUL2CP,SCU-L2 Cache Protection" "Disabled,Enabled"
newline
rbitfld.long 0x00 5. "DRAMIL,L2 data RAM input latency" "1 cycle,2 cycle"
rbitfld.long 0x00 0. "DRAMOL,L2 data RAM output latency" "2 cycles,3 cycles"
group.quad SPR:0x31B03++0x0
line.long 0x00 "L2ECTLR_EL1,L2 Extended Control Register"
bitfld.long 0x00 30. "L2INTASYNCERR,L2 internal asynchronous error" "No error,Error"
bitfld.long 0x00 29. "AXIASYNCERR,AXI asynchronous error" "No error,Error"
bitfld.long 0x00 0.--2. "L2DRC,L2 dynamic retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.quad SPR:0x31F00++0x00
line.long 0x00 "L2ACTLR_EL1,L2 Auxiliary Control Register"
bitfld.long 0x00 30.--31. "L2VC,L2 Victim Control" "0,1,2,3"
bitfld.long 0x00 29. "L2DEIEN,L2 cache data RAM error injection enable" "Disabled,Enabled"
bitfld.long 0x00 24. "L2TEIEN,L2 cache tag RAM error injection enable." "Disabled,Enabled"
newline
bitfld.long 0x00 14. "EUCE,Enables UniqueClean evictions with data" "Disabled,Enabled"
bitfld.long 0x00 3. "DCEPTE,Disables clean/evict push to external" "No,Yes"
group.quad spr:0x31F23++0x00
line.quad 0x00 "L2MERRSR_EL1,L2 Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
newline
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--21. "C/W,CPUID/Way" "CPU0 tag way 0,CPU0 tag way 1,CPU1 tag way 0,CPU1 tag way 1,CPU2 tag way 0,CPU2 tag way 1,CPU3 tag way 0,CPU3 tag way 1,?..."
newline
hexmask.quad.word 0x00 3.--16. 1. "RAD,RAM index address"
endif
tree.end
tree.end
tree "System Performance Monitor"
group.quad SPR:0x339C0++0x00
line.long 0x0 "PMCR_EL0,Performance Monitor Control Register"
hexmask.long.byte 0x00 24.--31. 1. "IMP,Implementer code"
hexmask.long.byte 0x00 16.--23. 1. "IDCODE,Identification code"
bitfld.long 0x00 11.--15. "N,Number of counters implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6. "LC,Long cycle count enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "DP,Disable CCNT when prohibited" "No,Yes"
bitfld.long 0x00 4. "X,Export Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "D,Clock Divider" "Every cycle,64th cycle"
bitfld.long 0x00 2. "C,Clock Counter Reset" "No reset,Reset"
newline
bitfld.long 0x00 1. "P,Performance Counter Reset" "No reset,Reset"
bitfld.long 0x00 0. "E,All Counters Enable" "Disabled,Enabled"
group.quad SPR:0x339C1++0x00
line.long 0x00 "PMCNTENSET_EL0,Count Enable Set Register"
bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
bitfld.long 0x00  30. "P30,Event Counter 30 enable bit" "Disabled,Enabled"
bitfld.long 0x00  29. "P29,Event Counter 29 enable bit" "Disabled,Enabled"
bitfld.long 0x00  28. "P28,Event Counter 28 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00  27. "P27,Event Counter 27 enable bit" "Disabled,Enabled"
bitfld.long 0x00  26. "P26,Event Counter 26 enable bit" "Disabled,Enabled"
bitfld.long 0x00  25. "P25,Event Counter 25 enable bit" "Disabled,Enabled"
bitfld.long 0x00  24. "P24,Event Counter 24 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00  23. "P23,Event Counter 23 enable bit" "Disabled,Enabled"
bitfld.long 0x00  22. "P22,Event Counter 22 enable bit" "Disabled,Enabled"
bitfld.long 0x00  21. "P21,Event Counter 21 enable bit" "Disabled,Enabled"
bitfld.long 0x00  20. "P20,Event Counter 20 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00  19. "P19,Event Counter 19 enable bit" "Disabled,Enabled"
bitfld.long 0x00  18. "P18,Event Counter 18 enable bit" "Disabled,Enabled"
bitfld.long 0x00  17. "P17,Event Counter 17 enable bit" "Disabled,Enabled"
bitfld.long 0x00  16. "P16,Event Counter 16 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00  15. "P15,Event Counter 15 enable bit" "Disabled,Enabled"
bitfld.long 0x00  14. "P14,Event Counter 14 enable bit" "Disabled,Enabled"
bitfld.long 0x00  13. "P13,Event Counter 13 enable bit" "Disabled,Enabled"
bitfld.long 0x00  12. "P12,Event Counter 12 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00  11. "P11,Event Counter 11 enable bit" "Disabled,Enabled"
bitfld.long 0x00  10. "P10,Event Counter 10 enable bit" "Disabled,Enabled"
bitfld.long 0x00  9. "P9,Event Counter 9 enable bit" "Disabled,Enabled"
bitfld.long 0x00  8. "P8,Event Counter 8 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00  7. "P7,Event Counter 7 enable bit" "Disabled,Enabled"
bitfld.long 0x00  6. "P6,Event Counter 6 enable bit" "Disabled,Enabled"
bitfld.long 0x00  5. "P5,Event Counter 5 enable bit" "Disabled,Enabled"
bitfld.long 0x00  4. "P4,Event Counter 4 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00  3. "P3,Event Counter 3 enable bit" "Disabled,Enabled"
bitfld.long 0x00  2. "P2,Event Counter 2 enable bit" "Disabled,Enabled"
bitfld.long 0x00  1. "P1,Event Counter 1 enable bit" "Disabled,Enabled"
bitfld.long 0x00  0. "P0,Event Counter 0 enable bit" "Disabled,Enabled"
group.quad SPR:0x339C2++0x00
line.long 0x00 "PMCNTENCLR_EL0,Count Enable Clear Register"
bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
eventfld.long 0x00  30. "P30,Event Counter 30 clear bit" "Disabled,Enabled"
eventfld.long 0x00  29. "P29,Event Counter 29 clear bit" "Disabled,Enabled"
eventfld.long 0x00  28. "P28,Event Counter 28 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  27. "P27,Event Counter 27 clear bit" "Disabled,Enabled"
eventfld.long 0x00  26. "P26,Event Counter 26 clear bit" "Disabled,Enabled"
eventfld.long 0x00  25. "P25,Event Counter 25 clear bit" "Disabled,Enabled"
eventfld.long 0x00  24. "P24,Event Counter 24 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  23. "P23,Event Counter 23 clear bit" "Disabled,Enabled"
eventfld.long 0x00  22. "P22,Event Counter 22 clear bit" "Disabled,Enabled"
eventfld.long 0x00  21. "P21,Event Counter 21 clear bit" "Disabled,Enabled"
eventfld.long 0x00  20. "P20,Event Counter 20 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  19. "P19,Event Counter 19 clear bit" "Disabled,Enabled"
eventfld.long 0x00  18. "P18,Event Counter 18 clear bit" "Disabled,Enabled"
eventfld.long 0x00  17. "P17,Event Counter 17 clear bit" "Disabled,Enabled"
eventfld.long 0x00  16. "P16,Event Counter 16 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  15. "P15,Event Counter 15 clear bit" "Disabled,Enabled"
eventfld.long 0x00  14. "P14,Event Counter 14 clear bit" "Disabled,Enabled"
eventfld.long 0x00  13. "P13,Event Counter 13 clear bit" "Disabled,Enabled"
eventfld.long 0x00  12. "P12,Event Counter 12 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  11. "P11,Event Counter 11 clear bit" "Disabled,Enabled"
eventfld.long 0x00  10. "P10,Event Counter 10 clear bit" "Disabled,Enabled"
eventfld.long 0x00  9. "P9,Event Counter 9 clear bit" "Disabled,Enabled"
eventfld.long 0x00  8. "P8,Event Counter 8 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  7. "P7,Event Counter 7 clear bit" "Disabled,Enabled"
eventfld.long 0x00  6. "P6,Event Counter 6 clear bit" "Disabled,Enabled"
eventfld.long 0x00  5. "P5,Event Counter 5 clear bit" "Disabled,Enabled"
eventfld.long 0x00  4. "P4,Event Counter 4 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  3. "P3,Event Counter 3 clear bit" "Disabled,Enabled"
eventfld.long 0x00  2. "P2,Event Counter 2 clear bit" "Disabled,Enabled"
eventfld.long 0x00  1. "P1,Event Counter 1 clear bit" "Disabled,Enabled"
eventfld.long 0x00  0. "P0,Event Counter 0 clear bit" "Disabled,Enabled"
group.quad SPR:0x339C3++0x00
line.long 0x00 "PMOVSCLR_EL0,Performance Monitors Overflow Flag Status Clear Register"
bitfld.long 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow"
eventfld.long 0x00  30. "P30,Event Counter 30 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  29. "P29,Event Counter 29 clear bit" "Disabled,Enabled"
eventfld.long 0x00  28. "P28,Event Counter 28 overflow clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  27. "P27,Event Counter 27 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  26. "P26,Event Counter 26 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  25. "P25,Event Counter 25 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  24. "P24,Event Counter 24 overflow clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  23. "P23,Event Counter 23 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  22. "P22,Event Counter 22 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  21. "P21,Event Counter 21 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  20. "P20,Event Counter 20 overflow clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  19. "P19,Event Counter 19 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  18. "P18,Event Counter 18 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  17. "P17,Event Counter 17 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  16. "P16,Event Counter 16 overflow clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  15. "P15,Event Counter 15 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  14. "P14,Event Counter 14 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  13. "P13,Event Counter 13 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  12. "P12,Event Counter 12 overflow clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  11. "P11,Event Counter 11 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  10. "P10,Event Counter 10 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  9. "P9,Event Counter 9 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  8. "P8,Event Counter 8 overflow clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  7. "P7,Event Counter 7 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  6. "P6,Event Counter 6 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  5. "P5,Event Counter 5 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  4. "P4,Event Counter 4 overflow clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00  3. "P3,Event Counter 3 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  2. "P2,Event Counter 2 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  1. "P1,Event Counter 1 overflow clear bit" "Disabled,Enabled"
eventfld.long 0x00  0. "P0,Event Counter 0 overflow clear bit" "Disabled,Enabled"
wgroup.quad SPR:0x339C4++0x00
line.long 0x00 "PMSWINC_EL0,Performance Monitor Software Increment"
bitfld.long 0x00  30. "P30,Increment PMN30" "No action,Increment"
bitfld.long 0x00  29. "P29,Increment PMN29" "No action,Increment"
bitfld.long 0x00  28. "P28,Increment PMN28" "No action,Increment"
bitfld.long 0x00  27. "P27,Increment PMN27" "No action,Increment"
newline
bitfld.long 0x00  26. "P26,Increment PMN26" "No action,Increment"
bitfld.long 0x00  25. "P25,Increment PMN25" "No action,Increment"
bitfld.long 0x00  24. "P24,Increment PMN24" "No action,Increment"
bitfld.long 0x00  23. "P23,Increment PMN23" "No action,Increment"
newline
bitfld.long 0x00  22. "P22,Increment PMN22" "No action,Increment"
bitfld.long 0x00  21. "P21,Increment PMN21" "No action,Increment"
bitfld.long 0x00  20. "P20,Increment PMN20" "No action,Increment"
bitfld.long 0x00  19. "P19,Increment PMN19" "No action,Increment"
newline
bitfld.long 0x00  18. "P18,Increment PMN18" "No action,Increment"
bitfld.long 0x00  17. "P17,Increment PMN17" "No action,Increment"
bitfld.long 0x00  16. "P16,Increment PMN16" "No action,Increment"
bitfld.long 0x00  15. "P15,Increment PMN15" "No action,Increment"
newline
bitfld.long 0x00  14. "P14,Increment PMN14" "No action,Increment"
bitfld.long 0x00  13. "P13,Increment PMN13" "No action,Increment"
bitfld.long 0x00  12. "P12,Increment PMN12" "No action,Increment"
bitfld.long 0x00  11. "P11,Increment PMN11" "No action,Increment"
newline
bitfld.long 0x00  10. "P10,Increment PMN10" "No action,Increment"
bitfld.long 0x00  9. "P9,Increment PMN9" "No action,Increment"
bitfld.long 0x00  8. "P8,Increment PMN8" "No action,Increment"
bitfld.long 0x00  7. "P7,Increment PMN7" "No action,Increment"
newline
bitfld.long 0x00  6. "P6,Increment PMN6" "No action,Increment"
bitfld.long 0x00  5. "P5,Increment PMN5" "No action,Increment"
bitfld.long 0x00  4. "P4,Increment PMN4" "No action,Increment"
bitfld.long 0x00  3. "P3,Increment PMN3" "No action,Increment"
newline
bitfld.long 0x00  2. "P2,Increment PMN2" "No action,Increment"
bitfld.long 0x00  1. "P1,Increment PMN1" "No action,Increment"
bitfld.long 0x00  0. "P0,Increment PMN0" "No action,Increment"
group.quad SPR:0x339C5++0x00
line.long 0x00 "PMSELR_EL0,Performance Monitor Select Register"
bitfld.long 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
tree.open "Common Event Identification Registers"
if (CORENAME()=="CORTEXA57")
rgroup.quad SPR:0x339C6++0x0
line.long 0x00 "PMCEID0_EL0,Common Event Identification Register 0"
bitfld.long 0x00 30. "EVENT30,Chain" "Not implemented,Implemented"
bitfld.long 0x00 29. "EVENT29,Bus cycle" "Not implemented,Implemented"
bitfld.long 0x00 28. "EVENT28,Instruction architecturally executed condition check pass" "Not implemented,Implemented"
newline
bitfld.long 0x00 27. "EVENT27,Instruction speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 26. "EVENT26,Local memory error" "Not implemented,Implemented"
bitfld.long 0x00 25. "EVENT25,Bus access" "Not implemented,Implemented"
newline
bitfld.long 0x00 24. "EVENT24,Level 2 data cache write-back" "Not implemented,Implemented"
bitfld.long 0x00 23. "EVENT23,Level 2 data cache refill" "Not implemented,Implemented"
bitfld.long 0x00 22. "EVENT22,Level 2 data cache access" "Not implemented,Implemented"
newline
bitfld.long 0x00 21. "EVENT21,Level 1 data cache write-back" "Not implemented,Implemented"
bitfld.long 0x00 20. "EVENT20,Level 1 instruction cache access" "Not implemented,Implemented"
bitfld.long 0x00 19. "EVENT19,Data memory access" "Not implemented,Implemented"
newline
bitfld.long 0x00 18. "EVENT18,Predictable branch speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 17. "EVENT17,Cycle" "Not implemented,Implemented"
bitfld.long 0x00 16. "EVENT16,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented"
newline
bitfld.long 0x00 15. "EVENT15,Instruction architecturally executed condition check pass  unaligned load or store" "Not implemented,Implemented"
bitfld.long 0x00 14. "EVENT14,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented"
bitfld.long 0x00 13. "EVENT13,Instruction architecturally executed  immediate branch" "Not implemented,Implemented"
newline
bitfld.long 0x00 12. "EVENT12,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented"
bitfld.long 0x00 11. "EVENT11,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented"
bitfld.long 0x00 10. "EVENT10,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented"
newline
bitfld.long 0x00 9. "EVENT9,Exception taken" "Not implemented,Implemented"
bitfld.long 0x00 8. "EVENT8,Instruction architecturally executed" "Not implemented,Implemented"
bitfld.long 0x00 7. "EVENT7,Instruction architecturally executed condition check pass  store" "Not implemented,Implemented"
newline
bitfld.long 0x00 6. "EVENT6,Instruction architecturally executed condition check pass  load" "Not implemented,Implemented"
bitfld.long 0x00 5. "EVENT5,Level 1 data TLB refill" "Not implemented,Implemented"
bitfld.long 0x00 4. "EVENT4,Level 1 data cache access" "Not implemented,Implemented"
newline
bitfld.long 0x00 3. "EVENT3,Level 1 data cache refill" "Not implemented,Implemented"
bitfld.long 0x00 2. "EVENT2,Level 1 instruction TLB refill" "Not implemented,Implemented"
bitfld.long 0x00 1. "EVENT1,Level 1 instruction cache refill" "Not implemented,Implemented"
newline
bitfld.long 0x00 0. "EVENT0,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented"
elif (CORENAME()=="CORTEXA53")
rgroup.quad SPR:0x339C6++0x0
line.long 0x00 "PMCEID0_EL0,Common Event Identification Register 0"
bitfld.long 0x00 31. "EVENT31,L1 Data cache allocate" "Not implemented,Implemented"
bitfld.long 0x00 30. "EVENT30,Chain" "Not implemented,Implemented"
bitfld.long 0x00 29. "EVENT29,Bus cycle" "Not implemented,Implemented"
newline
bitfld.long 0x00 28. "EVENT28,Instruction architecturally executed condition check pass" "Not implemented,Implemented"
bitfld.long 0x00 27. "EVENT27,Instruction speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 26. "EVENT26,Local memory error" "Not implemented,Implemented"
newline
bitfld.long 0x00 25. "EVENT25,Bus access" "Not implemented,Implemented"
bitfld.long 0x00 24. "EVENT24,Level 2 data cache write-back" "Not implemented,Implemented"
bitfld.long 0x00 23. "EVENT23,Level 2 data cache refill" "Not implemented,Implemented"
newline
bitfld.long 0x00 22. "EVENT22,Level 2 data cache access" "Not implemented,Implemented"
bitfld.long 0x00 21. "EVENT21,Level 1 data cache write-back" "Not implemented,Implemented"
bitfld.long 0x00 20. "EVENT20,Level 1 instruction cache access" "Not implemented,Implemented"
newline
bitfld.long 0x00 19. "EVENT19,Data memory access" "Not implemented,Implemented"
bitfld.long 0x00 18. "EVENT18,Predictable branch speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 17. "EVENT17,Cycle" "Not implemented,Implemented"
newline
bitfld.long 0x00 16. "EVENT16,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 15. "EVENT15,Instruction architecturally executed condition check pass  unaligned load or store" "Not implemented,Implemented"
bitfld.long 0x00 14. "EVENT14,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented"
newline
bitfld.long 0x00 13. "EVENT13,Instruction architecturally executed  immediate branch" "Not implemented,Implemented"
bitfld.long 0x00 12. "EVENT12,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented"
bitfld.long 0x00 11. "EVENT11,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented"
newline
bitfld.long 0x00 10. "EVENT10,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented"
bitfld.long 0x00 9. "EVENT9,Exception taken" "Not implemented,Implemented"
bitfld.long 0x00 8. "EVENT8,Instruction architecturally executed" "Not implemented,Implemented"
newline
bitfld.long 0x00 7. "EVENT7,Instruction architecturally executed condition check pass  store" "Not implemented,Implemented"
bitfld.long 0x00 6. "EVENT6,Instruction architecturally executed condition check pass  load" "Not implemented,Implemented"
bitfld.long 0x00 5. "EVENT5,Level 1 data TLB refill" "Not implemented,Implemented"
newline
bitfld.long 0x00 4. "EVENT4,Level 1 data cache access" "Not implemented,Implemented"
bitfld.long 0x00 3. "EVENT3,Level 1 data cache refill" "Not implemented,Implemented"
bitfld.long 0x00 2. "EVENT2,Level 1 instruction TLB refill" "Not implemented,Implemented"
newline
bitfld.long 0x00 1. "EVENT1,Level 1 instruction cache refill" "Not implemented,Implemented"
bitfld.long 0x00 0. "EVENT0,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented"
endif
rgroup.quad SPR:0x339C7++0x0
line.long 0x00 "PMCEID1_EL0,Common Event Identification Register 1"
bitfld.long 0x00 0. "EVENT32,Level 2 cache allocate" "Not implemented,Implemented"
tree.end
newline
group.quad spr:0x339D0++0x00
line.quad 0x00 "PMCCNTR_EL0,Performance Monitor Cycle Count Register"
group.quad SPR:0x339D1++0x00
line.long 0x00 "PMXEVTYPER_EL0,Performance Monitor Event Type Register"
group.quad SPR:0x339D2++0x00
line.long 0x00 "PMXEVCNTR_EL0,Performance Monitor Event Count Register"
group.quad SPR:0x339E0++0x00
line.long 0x00 "PMUSERENR_EL0,Performance Monitor User Enable Register"
bitfld.long 0x00 3. "ER,Event counter read enable" "Disabled,Enabled"
bitfld.long 0x00 2. "EC,Cycle counter read enable" "Disabled,Enabled"
bitfld.long 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled"
bitfld.long 0x00 0. "EN,User mode access enable" "Disabled,Enabled"
group.quad SPR:0x309E1++0x00
line.long 0x00 "PMINTENSET_EL1,Performance Monitor Interrupt Enable Set"
bitfld.long 0x00 31. "C,Cycle counter Overflow Interrupt clear" "Disabled,Enabled"
bitfld.long 0x00  30. "P30,PMCNT30 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  29. "P29,PMCNT29 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  28. "P28,PMCNT28 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00  27. "P27,PMCNT27 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  26. "P26,PMCNT26 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  25. "P25,PMCNT25 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  24. "P24,PMCNT24 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00  23. "P23,PMCNT23 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  22. "P22,PMCNT22 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  21. "P21,PMCNT21 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  20. "P20,PMCNT20 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00  19. "P19,PMCNT19 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  18. "P18,PMCNT18 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  17. "P17,PMCNT17 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  16. "P16,PMCNT16 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00  15. "P15,PMCNT15 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  14. "P14,PMCNT14 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  13. "P13,PMCNT13 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  12. "P12,PMCNT12 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00  11. "P11,PMCNT11 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  10. "P10,PMCNT10 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  9. "P9,PMCNT9 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  8. "P8,PMCNT8 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00  7. "P7,PMCNT7 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  6. "P6,PMCNT6 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00  3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00  0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled"
group.quad SPR:0x309E2++0x00
line.long 0x00 "PMINTENCLR_EL1,Performance Monitor Interrupt Enable Clear"
bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
eventfld.long 0x00  30. "P30,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  29. "P29,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  28. "P28,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00  27. "P27,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  26. "P26,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  25. "P25,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  24. "P24,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00  23. "P23,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  22. "P22,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  21. "P21,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  20. "P20,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00  19. "P19,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  18. "P18,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  17. "P17,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  16. "P16,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00  15. "P15,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  14. "P14,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  13. "P13,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  12. "P12,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00  11. "P11,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  10. "P10,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  9. "P9,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  8. "P8,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00  7. "P7,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  6. "P6,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  5. "P5,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  4. "P4,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00  3. "P3,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  2. "P2,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  1. "P1,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00  0. "P0,Overflow Interrupt Clear" "Disabled,Enabled"
group.quad SPR:0x339E3++0x00
line.long 0x00 "PMOVSSET_EL0,Performance Monitor Overflow Flag Status Set Register"
group.quad SPR:(0x33E80+0x0)++0x00
line.long 0x00 "PMEVCNTR0_EL0,Performance Monitors Event Count Register 0"
group.quad SPR:(0x33EC0+0x0)++0x00
line.long 0x00 "PMEVTYPER0_EL0,Performance Monitors Selected Event Type Register 0"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.long 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad SPR:(0x33E80+0x1)++0x00
line.long 0x00 "PMEVCNTR1_EL0,Performance Monitors Event Count Register 1"
group.quad SPR:(0x33EC0+0x1)++0x00
line.long 0x00 "PMEVTYPER1_EL0,Performance Monitors Selected Event Type Register 1"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.long 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad SPR:(0x33E80+0x2)++0x00
line.long 0x00 "PMEVCNTR2_EL0,Performance Monitors Event Count Register 2"
group.quad SPR:(0x33EC0+0x2)++0x00
line.long 0x00 "PMEVTYPER2_EL0,Performance Monitors Selected Event Type Register 2"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.long 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad SPR:(0x33E80+0x3)++0x00
line.long 0x00 "PMEVCNTR3_EL0,Performance Monitors Event Count Register 3"
group.quad SPR:(0x33EC0+0x3)++0x00
line.long 0x00 "PMEVTYPER3_EL0,Performance Monitors Selected Event Type Register 3"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.long 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad SPR:(0x33E80+0x4)++0x00
line.long 0x00 "PMEVCNTR4_EL0,Performance Monitors Event Count Register 4"
group.quad SPR:(0x33EC0+0x4)++0x00
line.long 0x00 "PMEVTYPER4_EL0,Performance Monitors Selected Event Type Register 4"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.long 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad SPR:(0x33E80+0x5)++0x00
line.long 0x00 "PMEVCNTR5_EL0,Performance Monitors Event Count Register 5"
group.quad SPR:(0x33EC0+0x5)++0x00
line.long 0x00 "PMEVTYPER5_EL0,Performance Monitors Selected Event Type Register 5"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.long 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad SPR:0x33EF7++0x00
line.long 0x00 "PMCCFILTR_EL0,Performance Monitors Cycle Count Filter Register"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.long 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
tree.end
tree "System Timer Registers"
group.quad SPR:0x33E00++0x00
line.long 0x00 "CNTFRQ_EL0,Counter Frequency Register"
rgroup.quad spr:0x33E01++0x00
line.quad 0x00 "CNTPCT_EL0,Counter Physical Count Register"
group.quad SPR:0x30E10++0x00
line.long 0x00 "CNTKCTL_EL1,Timer PL1 Control Register"
bitfld.long 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from the virtual counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
newline
bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
bitfld.long 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
group.quad SPR:0x33E20++0x00
line.long 0x00 "CNTP_TVAL_EL0,Counter-timer Physical Timer TimerValue register"
group.quad SPR:0x33E21++0x00
line.long 0x00 "CNTP_CTL_EL0,Counter PL1 Physical Timer Control Register"
bitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad SPR:0x33E30++0x00
line.long 0x00 "CNTV_TVAL_EL0,Counter PL1 Virtual Timer Value Register"
group.quad SPR:0x33E31++0x00
line.long 0x00 "CNTV_CTL_EL0,Counter PL1 Virtual Timer Control Register"
bitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad spr:0x33E02++0x00
line.quad 0x00 "CNTVCT_EL0,Counter Virtual Count Register"
group.quad spr:0x33E22++0x00
line.quad 0x00 "CNTP_CVAL_EL0,Counter PL1 Physical Compare Value Register"
group.quad spr:0x33E32++0x00
line.quad 0x00 "CNTV_CVAL_EL0,Counter PL1 Virtual Compare Value Register"
group.quad spr:0x34E03++0x00
line.quad 0x00 "CNTVOFF_EL2,Counter Virtual Offset Register"
group.quad SPR:0x34E10++0x00
line.long 0x00 "CNTHCTL_EL2,Counter Non-secure PL2 Control Register"
bitfld.long 0x00 4.--7. "EVNTI,Selects which bit is the trigger for the event stream generated from counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
group.quad SPR:0x34E20++0x00
line.long 0x00 "CNTHP_TVAL_EL2,Counter Non-secure PL2 Physical Timer Value Register"
group.quad SPR:0x34E21++0x00
line.long 0x00 "CNTHP_CTL_EL2,Counter Non-secure PL2 Physical Timer Control Register"
rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad spr:0x34E22++0x00
line.quad 0x00 "CNTHP_CVAL_EL2,Counter Non-secure PL2 Physical Compare Value Register"
group.quad SPR:0x37E20++0x00
line.long 0x00 "CNTPS_TVAL_EL1,Counter-timer Physical SecureTimer TimerValue register"
group.quad SPR:0x37E21++0x00
line.long 0x00 "CNTPS_CTL_EL1,Counter-timer Physical Secure Timer Control register"
rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad spr:0x37E22++0x00
line.quad 0x00 "CNTPS_CVAL_EL1,Counter-timer Physical Secure Timer CompareValue register"
tree.end
tree "Generic Interrupt Controller CPU Interface"
tree "AArch64 GIC Physical CPU Interface System Registers"
tree.open "Interrupt Controller Active Priorities Registers"
group.quad spr:0x30C84++0x00
line.quad 0x00 "ICC_AP0R0_EL1,Interrupt Controller Active Priorities Group 0 Register 0 (EL1)"
bitfld.quad 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.quad 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.quad 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.quad 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.quad 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.quad 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.quad 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.quad 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.quad 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.quad 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
bitfld.quad 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.quad 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.quad 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.quad 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.quad 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.quad 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.quad 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.quad 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.quad 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.quad 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
bitfld.quad 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.quad 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.quad 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.quad 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.quad 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.quad 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
group.quad spr:0x30C90++0x00
line.quad 0x00 "ICC_AP1R0_EL1,Interrupt Controller Active Priorities Group 1 Register 0 (EL1)"
bitfld.quad 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.quad 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.quad 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.quad 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.quad 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.quad 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.quad 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.quad 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.quad 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.quad 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
bitfld.quad 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.quad 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.quad 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.quad 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.quad 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.quad 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.quad 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.quad 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.quad 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.quad 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
bitfld.quad 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.quad 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.quad 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.quad 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.quad 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.quad 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
tree.end
newline
if (((per.q(spr:0x30CB6))&0x10000000000)==0x00)
wgroup.quad spr:0x30CB6++0x00
line.quad 0x00 "ICC_ASGI1R_EL1,Interrupt Controller Alias Software Generated Interrupt Group 1 Register"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
newline
bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self"
newline
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated"
else
wgroup.quad spr:0x30CB6++0x00
line.quad 0x00 "ICC_ASGI1R_EL1,Interrupt Controller Alias Software Generated Interrupt Group 1 Register"
newline
bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
endif
group.quad spr:0x30C83++0x00
line.quad 0x00 "ICC_BPR0_EL1,Interrupt Controller Binary Point Register 0"
bitfld.quad 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control and Interrupt Preemption Control" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]"
group.quad spr:0x30CC3++0x00
line.quad 0x00 "ICC_BPR1_EL1,Interrupt Controller Binary Point Register 1"
bitfld.quad 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control and Interrupt Preemption Control" "Reserved,[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]"
group.quad spr:0x30CC4++0x00
line.quad 0x00 "ICC_CTLR_EL1,Interrupt Controller Control Register (EL1)"
rbitfld.quad 0x00 19. "EXTRANGE,Extended INTID range" "Reserved,Supported"
rbitfld.quad 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255"
newline
rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Zero,Non-zero"
rbitfld.quad 0x00 14. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,Supported"
rbitfld.quad 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
newline
rbitfld.quad 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 6. "PMHE,Controls whether the priority mask Register is used as a hint for interrupt distribution" "Disabled,Enabled"
bitfld.quad 0x00 1. "EOIMODE,Controls whether a write to an End of Interrupt Register also deactivates the interrupt" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "CBPR,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 interrupts" "Separate registers,Same Register"
group.quad spr:0x36CC4++0x00
line.quad 0x00 "ICC_CTLR_EL3,Interrupt Controller Control Register (EL3)"
rbitfld.quad 0x00 19. "ExtRange,Extended INTID range" "Not supported,Supported"
rbitfld.quad 0x00 18. "RSS,Range Selector Support" "0 - 15,0 - 255"
newline
rbitfld.quad 0x00 17. "NDS,Disable Security not supported" "Supported,Not supported"
rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported"
rbitfld.quad 0x00 14. "SEIS,Indicates whether the CPU interface supports generation of SEIs" "Not supported,Supported"
newline
rbitfld.quad 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
rbitfld.quad 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "EOIMODE_EL1NS,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (Non-secure EL1 and EL2)" "Priority drop/Deactivation,Priority drop"
bitfld.quad 0x00 3. "EOIMODE_EL1S,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (Secure EL1)" "Priority drop/Deactivation,Priority drop"
bitfld.quad 0x00 2. "EOIMODE_EL3,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (EL3)" "Enabled,Disabled"
newline
bitfld.quad 0x00 1. "CBPR_EL1NS,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 Non-secure interrupts at EL1" "Separate registers,Same Register"
bitfld.quad 0x00 0. "CBPR_EL1S,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 Secure interrupts in Secure non-Monitor modes" "Separate registers,Same Register"
if (((per.q(spr:0x30CC4))&0x3800)==0x00)
wgroup.quad spr:0x30CB1++0x00
line.quad 0x00 "ICC_DIR_EL1,Interrupt Controller Deactivate Interrupt Register"
hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the interrupt to be deactivated"
wgroup.quad spr:0x30C81++0x00
line.quad 0x00 "ICC_EOIR0_EL1,Interrupt Controller End Of Interrupt Register 0"
hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR0 access"
wgroup.quad spr:0x30CC1++0x00
line.quad 0x00 "ICC_EOIR1_EL1,Interrupt Controller End Of Interrupt Register 1"
hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR1 access"
rgroup.quad spr:0x30C82++0x00
line.quad 0x00 "ICC_HPPIR0_EL1,Interrupt Controller Highest Priority Pending Interrupt Register 0"
hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the currentSecurity state and Exception level"
rgroup.quad spr:0x30CC2++0x00
line.quad 0x00 "ICC_HPPIR1_EL1,Interrupt Controller Highest Priority Pending Interrupt Register 1"
hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the currentSecurity state and Exception level"
elif (((per.q(spr:0x30CC4))&0x3800)==0x800)
wgroup.quad spr:0x30CB1++0x00
line.quad 0x00 "ICC_DIR_EL1,Interrupt Controller Deactivate Interrupt Register"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the interrupt to be deactivated"
wgroup.quad spr:0x30C81++0x00
line.quad 0x00 "ICC_EOIR0_EL1,Interrupt Controller End Of Interrupt Register 0"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR0 access"
wgroup.quad spr:0x30CC1++0x00
line.quad 0x00 "ICC_EOIR1_EL1,Interrupt Controller End Of Interrupt Register 1"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR1 access"
rgroup.quad spr:0x30C82++0x00
line.quad 0x00 "ICC_HPPIR0_EL1,Interrupt Controller Highest Priority Pending Interrupt Register 0"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the currentSecurity state and Exception level"
rgroup.quad spr:0x30CC2++0x00
line.quad 0x00 "ICC_HPPIR1_EL1,Interrupt Controller Highest Priority Pending Interrupt Register 1"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the currentSecurity state and Exception level"
endif
hgroup.quad spr:0x30C80++0x00
hide.long 0x00 "ICC_IAR0_EL1,Interrupt Acknowledge Register 0"
in
hgroup.quad spr:0x30CC0++0x00
hide.long 0x00 "ICC_IAR1_EL1,Interrupt Acknowledge Register 1"
in
newline
group.quad SPR:0x30CC6++0x00
line.long 0x00 "ICC_IGRPEN0_EL1,Interrupt Group Enable Register 0"
bitfld.long 0x00 0. "ENABLE,Enable" "Disabled,Enabled"
group.quad SPR:0x30CC7++0x00
line.long 0x00 "ICC_IGRPEN1_EL1,Interrupt Group Enable Register 1 (EL1)"
bitfld.long 0x00 0. "ENABLE,Enable" "Disabled,Enabled"
group.quad SPR:0x36CC7++0x00
line.long 0x00 "ICC_IGRPEN1_EL3,Interrupt Group Enable Register 1 (EL3)"
bitfld.long 0x00 1. "ENABLEGRP1S,Enable Group 1 interrupts for the Secure state" "Disabled,Enabled"
bitfld.long 0x00 0. "ENABLEGRP1NS,Enable Group 1 interrupts for the Non-secure state" "Disabled,Enabled"
group.quad SPR:0x30460++0x00
line.long 0x00 "ICC_PMR_EL1,Priority Mask Register"
hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Priority mask level for the CPU interface"
rgroup.quad SPR:0x30CB3++0x00
line.long 0x00 "ICC_RPR_EL1,Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface"
if (((per.q(spr:0x30CB7))&0x10000000000)==0x00)
wgroup.quad spr:0x30CB7++0x00
line.quad 0x00 "ICC_SGI0R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
newline
bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self"
newline
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated."
else
wgroup.quad spr:0x30CB7++0x00
line.quad 0x00 "ICC_SGI0R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register"
newline
bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
endif
if (((per.q(spr:0x30CB5))&0x10000000000)==0x00)
wgroup.quad spr:0x30CB5++0x00
line.quad 0x00 "ICC_SGI1R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
newline
bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self"
newline
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated"
else
wgroup.quad spr:0x30CB5++0x00
line.quad 0x00 "ICC_SGI1R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register"
newline
bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
endif
group.quad SPR:0x30CC5++0x00
line.long 0x00 "ICC_SRE_EL1,System Register Enable Register for EL1"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
group.quad SPR:0x34C95++0x00
line.long 0x00 "ICC_SRE_EL2,System Register Enable Register for EL2"
bitfld.long 0x00 3. "ENABLE,Enable lower exception level access" "Disabled,Enabled"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
newline
bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
group.quad SPR:0x36CC5++0x00
line.long 0x00 "ICC_SRE_EL3,System Register Enable Register for EL3"
bitfld.long 0x00 3. "ENABLE,Enable lower exception level access" "Disabled,Enabled"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
newline
bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
tree.end
tree "AArch64 Virtual Interface Control System Registers"
tree.open "Hypervisor Active Priorities Registers"
group.quad SPR:0x34C80++0x00
line.long 0x00 "ICH_AP0R0_EL2,Interrupt Controller Hypervisor Active Priorities Group 0 Register 0"
bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
if (CORENAME()=="CORTEXA53")
group.quad SPR:0x34C90++0x00
line.long 0x00 "ICH_AP1R0_EL2,Interrupt Controller Hypervisor Active Priorities Group 1 Register 0"
bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
endif
tree.end
newline
rgroup.quad SPR:0x34CB3++0x00
line.long 0x00 "ICH_EISR_EL2,Interrupt Controller End of Interrupt Status Register"
bitfld.long 0x00 3. "STATUS3,EOI maintenance interrupt status bit for List register 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "STATUS2,EOI maintenance interrupt status bit for List register 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "STATUS1,EOI maintenance interrupt status bit for List register 1" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. "STATUS0,EOI maintenance interrupt status bit for List register 0" "No interrupt,Interrupt"
rgroup.quad SPR:0x34CB5++0x00
line.long 0x00 "ICH_ELRSR_EL2,Interrupt Controller Empty List Register Status Register"
bitfld.long 0x00 3. "STATUS3,Status bit for List register 3" "Interrupt,No interrupt"
bitfld.long 0x00 2. "STATUS2,Status bit for List register 2" "Interrupt,No interrupt"
bitfld.long 0x00 1. "STATUS1,Status bit for List register 1" "Interrupt,No interrupt"
newline
bitfld.long 0x00 0. "STATUS0,Status bit for List register 0" "Interrupt,No interrupt"
group.quad SPR:0x34CB0++0x00
line.long 0x00 "ICH_HCR_EL2,Interrupt Controller Hypervisor Control Register"
bitfld.long 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,?..."
bitfld.long 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR" "Not trapped,Trapped"
bitfld.long 0x00 13. "TSEI,Trap all locally generated SEIs" "Not trapped,Trapped"
newline
bitfld.long 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped"
bitfld.long 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped"
bitfld.long 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped"
newline
bitfld.long 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled"
if (((d.q(spr:(0x34CC0+0x0)))&0x2000000000000000)==0x00)
group.quad spr:(0x34CC0+0x0)++0x00
line.quad 0x00 "ICH_LR0_EL2,Interrupt Controller List Register 0"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
else
group.quad spr:(0x34CC0+0x0)++0x00
line.quad 0x00 "ICH_LR0_EL2,Interrupt Controller List Register 0"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID, for hardware interrupts"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
endif
if (((d.q(spr:(0x34CC0+0x1)))&0x2000000000000000)==0x00)
group.quad spr:(0x34CC0+0x1)++0x00
line.quad 0x00 "ICH_LR1_EL2,Interrupt Controller List Register 1"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
else
group.quad spr:(0x34CC0+0x1)++0x00
line.quad 0x00 "ICH_LR1_EL2,Interrupt Controller List Register 1"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID, for hardware interrupts"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
endif
if (((d.q(spr:(0x34CC0+0x2)))&0x2000000000000000)==0x00)
group.quad spr:(0x34CC0+0x2)++0x00
line.quad 0x00 "ICH_LR2_EL2,Interrupt Controller List Register 2"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
else
group.quad spr:(0x34CC0+0x2)++0x00
line.quad 0x00 "ICH_LR2_EL2,Interrupt Controller List Register 2"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID, for hardware interrupts"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
endif
if (((d.q(spr:(0x34CC0+0x3)))&0x2000000000000000)==0x00)
group.quad spr:(0x34CC0+0x3)++0x00
line.quad 0x00 "ICH_LR3_EL2,Interrupt Controller List Register 3"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
else
group.quad spr:(0x34CC0+0x3)++0x00
line.quad 0x00 "ICH_LR3_EL2,Interrupt Controller List Register 3"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID, for hardware interrupts"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
endif
rgroup.quad SPR:0x34CB2++0x00
line.long 0x00 "ICH_MISR_EL2,Interrupt Controller Maintenance Interrupt State Register"
bitfld.long 0x00 7. "VGRP1D,VPE Group 1 Disabled" "Not asserted,Asserted"
bitfld.long 0x00 6. "VGRP1E,VPE Group 1 Enabled" "Not asserted,Asserted"
bitfld.long 0x00 5. "VGRP0D,VPE Group 0 Disabled" "Not asserted,Asserted"
newline
bitfld.long 0x00 4. "VGRP0E,VPE Group 0 Enabled" "Not asserted,Asserted"
bitfld.long 0x00 3. "NP,No Pending" "Not asserted,Asserted"
bitfld.long 0x00 2. "LRENP,List Register Entry Not Present" "Not asserted,Asserted"
newline
bitfld.long 0x00 1. "U,Underflow" "Not asserted,Asserted"
bitfld.long 0x00 0. "EOI,End Of Interrupt" "Not asserted,Asserted"
group.quad SPR:0x34CB7++0x00
line.long 0x00 "ICH_VMCR_EL2,Interrupt Controller Virtual Machine Control Register"
hexmask.long.byte 0x00 24.--31. 1. "VPMR,The priority mask level for the virtual CPU interface"
bitfld.long 0x00 21.--23. "VBPR0,Virtual Binary Point Register Group 0" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]"
bitfld.long 0x00 18.--20. "VBPR1,Virtual Binary Point Register, Group 1" ",[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]"
newline
bitfld.long 0x00 9. "VEOIM,Controls whether a write to an End of Interrupt register also deactivates the virtual interrupt" "Disabled,Enabled"
bitfld.long 0x00 4. "VCBPR,Virtual Common Binary Point Register" "Separate registers,Same register"
bitfld.long 0x00 3. "VFIQEN,Virtual FIQ enable" "Virtual IRQs,Virtual FIQs"
newline
bitfld.long 0x00 2. "VACKCTL,Virtual FIQ enable" "1022,Corresponding interrupt"
bitfld.long 0x00 1. "VENG1,Virtual Group 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "VENG0,Virtual Group 0 interrupt enable" "Disabled,Enabled"
group.quad SPR:0x34C94++0x00
line.long 0x00 "ICH_VSEIR_EL2,Interrupt Controller Virtual System Error Interrupt Register"
rgroup.quad SPR:0x34CB1++0x00
line.long 0x00 "ICH_VTR_EL2,Interrupt Controller VGIC Type Register"
bitfld.long 0x00 29.--31. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 26.--28. "PREBITS,The number of virtual preemption bits implemented, minus one" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 23.--25. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
newline
bitfld.long 0x00 22. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,Supported"
bitfld.long 0x00 21. "A3V,Affinity 3 Valid" "Only zero values supported,Non-zero values supported"
bitfld.long 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Supported,Not supported"
newline
bitfld.long 0x00 19. "TDS,Separate trapping of Non-secure EL1 writes to ICV_DIR_EL1 supported" "Not supported,Supported"
bitfld.long 0x00 0.--4. "LISTREGS,The number of implemented List registers, minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
tree.end
tree.end
tree "Debug Registers"
rgroup.quad SPR:0x23010++0x00
line.long 0x00 "MDCCSR_EL0,Debug Comms Channel Status Register"
bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full"
bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full"
group.quad SPR:0x20020++0x00
line.long 0x00 "MDCCINT_EL1,Debug Comms Channel Interrupt Enable register"
bitfld.long 0x00 30. "RX,DCC interrupt enable controls" "Disabled,Enabled"
bitfld.long 0x00 29. "TX,DCC interrupt enable controls" "Disabled,Enabled"
group.quad spr:0x23040++0x00
line.quad 0x00 "DBGDTR_EL0,Half Duplex Data Transfer Register"
rgroup.quad SPR:0x23050++0x00
line.long 0x00 "DBGDTRRX_EL0,Full Duplex Receive Data Transfer Register"
wgroup.quad SPR:0x23050++0x00
line.long 0x00 "DBGDTRTX_EL0,Full Duplex Transmit Data Transfer Register"
group.quad SPR:0x24070++0x00
line.long 0x00 "DBGVCR32_EL2,Vector Catch Register"
bitfld.long 0x00 31. "NSF,FIQ vector catch enable in Non-secure state" "Low,High"
bitfld.long 0x00 30. "NSI,IRQ vector catch enable in Non-secure state" "Low,High"
bitfld.long 0x00 28. "NSD,Data Abort vector catch enable in Non-secure state" "Low,High"
bitfld.long 0x00 27. "NSP,Prefetch Abort vector catch enable in Non-secure state" "Low,High"
newline
bitfld.long 0x00 26. "NSS,Supervisor Call (SVC) vector catch enable in Non-secure state" "Low,High"
bitfld.long 0x00 25. "NSU,Undefined Instruction vector catch enable in Non-secure state" "Low,High"
bitfld.long 0x00 7. "SF,FIQ vector catch enable in Secure state" "Low,High"
bitfld.long 0x00 6. "SI,IRQ vector catch enable in Secure state" "Low,High"
newline
bitfld.long 0x00 4. "SD,Data Abort vector catch enable in Secure state" "Low,High"
bitfld.long 0x00 3. "SP,Prefetch Abort vector catch enable in Secure state" "Low,High"
bitfld.long 0x00 2. "SS,Supervisor Call (SVC) vector catch enable in Secure state" "Low,High"
bitfld.long 0x00 1. "SU,Undefined Instruction vector catch enable in Secure state" "Low,High"
group.quad SPR:0x20002++0x00
line.long 0x00 "OSDTRRX_EL1,OS Lock Data Transfer Register"
group.quad SPR:0x20022++0x00
line.long 0x00 "MDSCR_EL1,Monitor Debug System Control Register"
bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full"
bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full"
bitfld.long 0x00 27. "RXO,Save/restore bit" "Low,High"
bitfld.long 0x00 26. "TXU,Save/restore bit" "Low,High"
newline
bitfld.long 0x00 22.--23. "INTDIS,Save/restore bits" "0,1,2,3"
bitfld.long 0x00 21. "TDA,Save/restore bit" "Low,High"
bitfld.long 0x00 15. "MDE,Monitor debug events" "Disabled,Enabled"
bitfld.long 0x00 14. "HDE,Save/restore bit" "Low,High"
newline
bitfld.long 0x00 13. "KDE,Local (kernel) debug enable" "Disabled,Enabled"
bitfld.long 0x00 12. "TDCC,Trap accesses to the debug comms channel in EL0" "Disabled,Enabled"
bitfld.long 0x00 6. "ERR,Save/restore bit" "Low,High"
bitfld.long 0x00 0. "SS,Software step control" "Disabled,Enabled"
group.quad SPR:0x20032++0x00
line.long 0x00 "OSDTRTX_EL1,OS Lock Data Transfer Register"
group.quad SPR:0x20062++0x00
line.long 0x00 "OSECCR_EL1,OS Lock Exception Catch Control Register"
rgroup.quad spr:0x20100++0x00
line.quad 0x00 "MDRAR_EL1,Debug ROM Address Register"
hexmask.quad 0x00 12.--47. 0x1000 "ROMADDR,ROM base physical address"
bitfld.quad 0x00 0.--1. "VALID,ROM address valid" "Invalid,Reserved,Reserved,Valid"
wgroup.quad SPR:0x20104++0x00
line.long 0x00 "OSLAR_EL1,OS Lock Access Register"
bitfld.long 0x00 0. "OSLK,OS lock" "Unlock,Lock"
rgroup.quad SPR:0x20114++0x00
line.long 0x00 "OSLSR_EL1,OS Lock Status Register"
bitfld.long 0x00 2. "NTT,Not 32-bit access" "Low,High"
bitfld.long 0x00 1. "OSLK,OS lock status" "Not locked,Locked"
bitfld.long 0x00 0. 3. "OSLM,OS lock model implemented field" "Reserved,Reserved,Impelemented,?..."
group.quad SPR:0x20134++0x00
line.long 0x00 "OSDLR_EL1,OS Double-lock Register"
bitfld.long 0x00 0. "DLK,OS double-lock control" "Not locked,Locked"
group.quad SPR:0x20144++0x00
line.long 0x00 "DBGPRCR_EL1,Debug Power/Reset Control Register"
bitfld.long 0x00 0. "CORENPDRQ,Core no powerdown request" "No,Yes"
group.quad SPR:0x20786++0x00
line.long 0x00 "DBGCLAIMSET_EL1,Claim Tag register Set"
bitfld.long 0x0 7. "CT7,Claim Tag 7 Set" "Not set,Set"
bitfld.long 0x0 6. "CT6,Claim Tag 6 Set" "Not set,Set"
bitfld.long 0x0 5. "CT5,Claim Tag 5 Set" "Not set,Set"
bitfld.long 0x0 4. "CT4,Claim Tag 4 Set" "Not set,Set"
newline
bitfld.long 0x0 3. "CT3,Claim Tag 3 Set" "Not set,Set"
bitfld.long 0x0 2. "CT2,Claim Tag 2 Set" "Not set,Set"
bitfld.long 0x0 1. "CT1,Claim Tag 1 Set" "Not set,Set"
bitfld.long 0x0 0. "CT0,Claim Tag 0 Set" "Not set,Set"
group.quad SPR:0x20796++0x00
line.long 0x00 "DBGCLAIMCLR_EL1,Claim Tag register Clear"
bitfld.long 0x0 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared"
bitfld.long 0x0 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared"
bitfld.long 0x0 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared"
bitfld.long 0x0 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared"
newline
bitfld.long 0x0 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared"
bitfld.long 0x0 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared"
bitfld.long 0x0 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared"
bitfld.long 0x0 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared"
rgroup.quad SPR:0x207E6++0x00
line.long 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
group.quad SPR:0x33450++0x00
line.long 0x00 "DSPSR_EL0,Debug Saved Processor Status Register"
group.quad spr:0x33451++0x00
line.quad 0x00 "DLR_EL0,Debug Link Register"
tree.end
tree "Breakpoint Registers"
if (((d.l(spr:(0x20005+0x0)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.quad spr:(0x20004+0x0)++0x00 "Breakpoint 0"
line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((d.l(spr:(0x20005+0x0)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
group.quad spr:(0x20004+0x0)++0x00 "Breakpoint 0"
line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
elif (((d.l(spr:(0x20005+0x0)))&0xF00000)==(0xA00000||0xB00000||0xE00000||0xF00000))
else
group.quad spr:(0x20004+0x0)++0x00 "Breakpoint 0"
line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
group.quad SPR:(0x20005+0x0)++0x0
line.long 0x00 "DBGBCR0_EL1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((d.l(spr:(0x20005+0x10)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.quad spr:(0x20004+0x10)++0x00 "Breakpoint 1"
line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((d.l(spr:(0x20005+0x10)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
group.quad spr:(0x20004+0x10)++0x00 "Breakpoint 1"
line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
elif (((d.l(spr:(0x20005+0x10)))&0xF00000)==(0xA00000||0xB00000||0xE00000||0xF00000))
else
group.quad spr:(0x20004+0x10)++0x00 "Breakpoint 1"
line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
group.quad SPR:(0x20005+0x10)++0x0
line.long 0x00 "DBGBCR1_EL1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((d.l(spr:(0x20005+0x20)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.quad spr:(0x20004+0x20)++0x00 "Breakpoint 2"
line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((d.l(spr:(0x20005+0x20)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
group.quad spr:(0x20004+0x20)++0x00 "Breakpoint 2"
line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
elif (((d.l(spr:(0x20005+0x20)))&0xF00000)==(0xA00000||0xB00000||0xE00000||0xF00000))
else
group.quad spr:(0x20004+0x20)++0x00 "Breakpoint 2"
line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
group.quad SPR:(0x20005+0x20)++0x0
line.long 0x00 "DBGBCR2_EL1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((d.l(spr:(0x20005+0x30)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.quad spr:(0x20004+0x30)++0x00 "Breakpoint 3"
line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((d.l(spr:(0x20005+0x30)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
group.quad spr:(0x20004+0x30)++0x00 "Breakpoint 3"
line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
elif (((d.l(spr:(0x20005+0x30)))&0xF00000)==(0xA00000||0xB00000||0xE00000||0xF00000))
else
group.quad spr:(0x20004+0x30)++0x00 "Breakpoint 3"
line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
group.quad SPR:(0x20005+0x30)++0x0
line.long 0x00 "DBGBCR3_EL1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((d.l(spr:(0x20005+0x40)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.quad spr:(0x20004+0x40)++0x00 "Breakpoint 4"
line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((d.l(spr:(0x20005+0x40)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
group.quad spr:(0x20004+0x40)++0x00 "Breakpoint 4"
line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
elif (((d.l(spr:(0x20005+0x40)))&0xF00000)==(0xA00000||0xB00000||0xE00000||0xF00000))
else
group.quad spr:(0x20004+0x40)++0x00 "Breakpoint 4"
line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
group.quad SPR:(0x20005+0x40)++0x0
line.long 0x00 "DBGBCR4_EL1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((d.l(spr:(0x20005+0x50)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.quad spr:(0x20004+0x50)++0x00 "Breakpoint 5"
line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((d.l(spr:(0x20005+0x50)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
group.quad spr:(0x20004+0x50)++0x00 "Breakpoint 5"
line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
elif (((d.l(spr:(0x20005+0x50)))&0xF00000)==(0xA00000||0xB00000||0xE00000||0xF00000))
else
group.quad spr:(0x20004+0x50)++0x00 "Breakpoint 5"
line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
group.quad SPR:(0x20005+0x50)++0x0
line.long 0x00 "DBGBCR5_EL1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
tree.end
tree "Watchpoint Control Registers"
group.quad spr:(0x20006+0x0)++0x00 "Watchpoint 0"
line.quad 0x00 "DBGWVR0_EL1,Watchpoint Value Register (AArch64)"
hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address"
group.quad spr:(0x20007+0x0)++0x00
line.quad 0x00 "DBGWCR0_EL1,Watchpoint Control Register"
bitfld.quad 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled"
hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select"
newline
bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both"
bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled"
group.quad spr:(0x20006+0x10)++0x00 "Watchpoint 1"
line.quad 0x00 "DBGWVR1_EL1,Watchpoint Value Register (AArch64)"
hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address"
group.quad spr:(0x20007+0x10)++0x00
line.quad 0x00 "DBGWCR1_EL1,Watchpoint Control Register"
bitfld.quad 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled"
hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select"
newline
bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both"
bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled"
group.quad spr:(0x20006+0x20)++0x00 "Watchpoint 2"
line.quad 0x00 "DBGWVR2_EL1,Watchpoint Value Register (AArch64)"
hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address"
group.quad spr:(0x20007+0x20)++0x00
line.quad 0x00 "DBGWCR2_EL1,Watchpoint Control Register"
bitfld.quad 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled"
hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select"
newline
bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both"
bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled"
group.quad spr:(0x20006+0x30)++0x00 "Watchpoint 3"
line.quad 0x00 "DBGWVR3_EL1,Watchpoint Value Register (AArch64)"
hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address"
group.quad spr:(0x20007+0x30)++0x00
line.quad 0x00 "DBGWCR3_EL1,Watchpoint Control Register"
bitfld.quad 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled"
hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select"
newline
bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both"
bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled"
tree.end
tree.end
tree.open "AArch32"
tree "ID Registers"
rgroup.long c15:0x0000++0x0
line.long 0x0 "MIDR,Main ID Register"
hexmask.long.byte 0x0 24.--31. 0x1 "IMPL,Implementer code"
bitfld.long 0x0 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x0 16.--19. "ARCH, Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8"
newline
hexmask.long.word 0x0 4.--15. 0x10 "PART,Primary Part Number"
bitfld.long 0x0 0.--3. "REV,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
if (CORENAME()=="CORTEXA57")
rgroup.long c15:0x0100++0x0
line.long 0x0 "CTR,Cache Type Register"
bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,Reserved,PIPT"
bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
elif (CORENAME()=="CORTEXA53")
rgroup.long c15:0x0100++0x0
line.long 0x0 "CTR,Cache Type Register"
bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,VIPT,?..."
bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
endif
if corename()=="CORTEXA57"
rgroup.long c15:0x0300++0x0
line.long 0x0 "TLBTR,TLB Type Register"
endif
if corename()=="CORTEXA57"
rgroup.long c15:0x0500++0x0
line.long 0x0 "MPIDR,Multiprocessor Affinity Register"
bitfld.long 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,?..."
newline
bitfld.long 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Not implemented,Implemented"
hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field"
hexmask.long.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field"
newline
bitfld.long 0x00 0.--1. "CPUID,Indicates the core number in the device" "1,2,3,4"
elif corename()=="CORTEXA53"
rgroup.long c15:0x0500++0x0
line.long 0x0 "MPIDR,Multiprocessor Affinity Register"
bitfld.long 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,?..."
newline
bitfld.long 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Not implemented,?..."
hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field"
hexmask.long.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field"
newline
hexmask.long.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. Lowest level affinity field"
endif
rgroup.long c15:0x0600++0x0
line.long 0x0 "REVIDR,Revision ID Register"
rgroup.long c15:0x0410++0x00
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
bitfld.long 0x00 28.--31. "IS,Indicates innermost shareability domain implemented" "Reserved,Implemented,?..."
bitfld.long 0x00 24.--27. "FCSE,Fast Context Switch Memory Mappings Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "AR,Auxiliary Register Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "TCM,TCM and Associated DMA Support" "Not supported,?..."
bitfld.long 0x00 12.--15. "SL,Shareability levels" "Reserved,Implemented 2 levels,?..."
bitfld.long 0x00 8.--11. "OSS,Outer Shareable Support" "Reserved,Implemented,?..."
newline
bitfld.long 0x00 4.--7. "PMSA,Physical Memory System Architecture (PMSA) Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "VMSA,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0510++0x00
line.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
bitfld.long 0x00 28.--31. "BTB,Branch Predictor" "Reserved,Reserved,Required,?..."
bitfld.long 0x00 24.--27. "L1TCO,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "L1UCMO,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 16.--19. "L1HCMO,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 12.--15. "L1UCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "L1HCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "L1UCLMOMVA,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "L1HCLMOMVA,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..."
rgroup.long c15:0x0610++0x00
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
bitfld.long 0x00 28.--31. "HAF,Hardware Access Flag Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "WFI,Wait for Interrupt Stalling Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "MBF,Memory Barrier Operations Support" "Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "UTLBMO,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "HTLBMO,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "HL1CMRO,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "HL1BPCRO,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "HL1FPCRO,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..."
rgroup.long c15:0x0710++0x00
line.long 0x00 "ID_MMFR3,Memory Model Feature Register 3"
bitfld.long 0x00 28.--31. "SS,Supersection support" "Supported,?..."
bitfld.long 0x00 24.--27. "CMEMSZ,Cache memory size" "Reserved,Reserved,1TByte,?..."
bitfld.long 0x00 20.--23. "CW,Coherent walk" "Reserved,Supported,?..."
newline
bitfld.long 0x00 12.--15. "MB,Maintenance broadcast Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "BPM,Invalidate Branch predictor Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "HCMOSW,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "HCMOMVA,Invalidate Cache MVA Support" "Reserved,Supported,?..."
rgroup.long c15:0x0620++0x00
line.long 0x00 "ID_MMFR4,ID_MMFR4"
bitfld.long 0x00 4.--7. "AC2,Extension of ACTLR and HACTLR by ACTLR2 and HACTLR2" "Not implemented, implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved"
rgroup.long c15:0x0020++0x00
line.long 0x00 "ID_ISAR0,Instruction Set Attribute Register 0"
bitfld.long 0x00 24.--27. "DIVI,Divide Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "DEBI,Debug Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 16.--19. "CI,Coprocessor Instructions Support" "Not supported,?..."
newline
bitfld.long 0x00 12.--15. "CBI,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "BI,Bitfield Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "BCI,Bit Counting Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "SI,Swap Instructions Support" "Not supported,?..."
rgroup.long c15:0x0120++0x00
line.long 0x00 "ID_ISAR1,Instruction Set Attribute Register 1"
bitfld.long 0x00 28.--31. "JI,Jazelle Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 24.--27. "INTI,Interwork Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "IMMI,Immediate Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "ITEI,If Then Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "EXTI,Extend Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "EARI,Exception A and R Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "EXIN,Exception in ARM Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "ENDI,Endian Instructions Support" "Reserved,Supported,?..."
rgroup.long c15:0x0220++0x00
line.long 0x00 "ID_ISAR2,Instruction Set Attribute Register 2"
bitfld.long 0x00 28.--31. "RI,Reversal Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 24.--27. "PSRI,PSR Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "UMI,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "SMI,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "MI,Multiply Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "II,Multi-Access Interruptible Instructions Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "MHI,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "LSI,Load and Store Instructions Support" "Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0320++0x00
line.long 0x00 "ID_ISAR3,Instruction Set Attribute Register 3"
bitfld.long 0x00 28.--31. "TEEEI,Thumb-EE Extensions Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "NOPI,True NOP Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "TCI,Thumb Copy Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "TBI,Table Branch Instructions Support" "Reserved,Supported,Reserved,?..."
bitfld.long 0x00 12.--15. "SPI,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "SVCI,SVC Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "SIMDI,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "SI,Saturate Instructions Support" "Reserved,Supported,?..."
rgroup.long c15:0x0420++0x00
line.long 0x00 "ID_ISAR4,Instruction Set Attribute Register 4"
bitfld.long 0x00 28.--31. "SWP_FRAC,Memory System Locking Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "PSR_M_I,PSR_M Instructions Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "SPRI,Synchronization Primitive instructions" "Supported,?..."
newline
bitfld.long 0x00 16.--19. "BI,Barrier Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SMCI,SMC Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "WBI,Write-Back Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "WSI,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "UI,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0520++0x00
line.long 0x00 "ID_ISAR5,Instruction Set Attribute Register 5"
bitfld.long 0x00 16.--19. "CRC32,CRC32 Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SHA2,SHA2 Instructions Support" "Not supported,Supported,?..."
bitfld.long 0x00 8.--11. "SHA1,SHA1 Instructions Support" "Not supported,Supported,?..."
newline
bitfld.long 0x00 4.--7. "AES,AES Instructions Support" "Not supported,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "SEVL,SEVL Instructions Support" "Reserved,Supported,?..."
rgroup.long c15:0x0010++0x00
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
bitfld.long 0x00 12.--15. "STATE3,Thumb Execution Environment (Thumb-EE) Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "STATE2,Support for Jazelle extension" "Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "STATE1,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "STATE0,ARM Instruction Set Support" "Reserved,Supported,?..."
rgroup.long c15:0x0110++0x00
line.long 0x00 "ID_PFR1,Processor Feature Register 1"
bitfld.long 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Disabled,Enabled,?..."
newline
bitfld.long 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "VE,Virtualization Extensions Support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "SE,Security Extensions Architecture v1 Support" "Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..."
if corename()=="CORTEXA57"
rgroup.long c15:0x0210++0x00
line.long 0x00 "ID_DFR0,Debug Feature Register 0"
bitfld.long 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..."
bitfld.long 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "CDM_MM,Memory-Mapped Debug Model Support" "Not supported,?..."
bitfld.long 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
elif corename()=="CORTEXA53"
rgroup.long c15:0x0210++0x00
line.long 0x00 "ID_DFR0,Debug Feature Register 0"
bitfld.long 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..."
bitfld.long 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..."
bitfld.long 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
endif
group.long c15:0x0310++0x00
line.long 0x00 "ID_AFR0,Auxiliary Feature Register 0"
if corename()=="CORTEXA57"
rgroup.long c15:0x6C9++0x0
line.long 0x00 "PMCEID0,Common Event Identification Register 0"
bitfld.long 0x00 30. "EVENT30,Chain" "Not implemented,Implemented"
newline
bitfld.long 0x00 29. "EVENT29,Bus cycle" "Not implemented,Implemented"
bitfld.long 0x00 28. "EVENT28,Instruction architecturally executed condition check pass" "Not implemented,Implemented"
bitfld.long 0x00 27. "EVENT27,Instruction speculatively executed" "Not implemented,Implemented"
newline
bitfld.long 0x00 26. "EVENT26,Local memory error" "Not implemented,Implemented"
bitfld.long 0x00 25. "EVENT25,Bus access" "Not implemented,Implemented"
bitfld.long 0x00 24. "EVENT24,Level 2 data cache write-back" "Not implemented,Implemented"
newline
bitfld.long 0x00 23. "EVENT23,Level 2 data cache refill" "Not implemented,Implemented"
bitfld.long 0x00 22. "EVENT22,Level 2 data cache access" "Not implemented,Implemented"
bitfld.long 0x00 21. "EVENT21,Level 1 data cache write-back" "Not implemented,Implemented"
newline
bitfld.long 0x00 20. "EVENT20,Level 1 instruction cache access" "Not implemented,Implemented"
bitfld.long 0x00 19. "EVENT19,Data memory access" "Not implemented,Implemented"
bitfld.long 0x00 18. "EVENT18,Predictable branch speculatively executed" "Not implemented,Implemented"
newline
bitfld.long 0x00 17. "EVENT17,Cycle" "Not implemented,Implemented"
bitfld.long 0x00 16. "EVENT16,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 15. "EVENT15,Instruction architecturally executed condition check pass  unaligned load or store" "Not implemented,Implemented"
newline
bitfld.long 0x00 14. "EVENT14,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented"
bitfld.long 0x00 13. "EVENT13,Instruction architecturally executed  immediate branch" "Not implemented,Implemented"
bitfld.long 0x00 12. "EVENT12,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented"
newline
bitfld.long 0x00 11. "EVENT11,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented"
bitfld.long 0x00 10. "EVENT10,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented"
bitfld.long 0x00 9. "EVENT9,Exception taken" "Not implemented,Implemented"
newline
bitfld.long 0x00 8. "EVENT8,Instruction architecturally executed" "Not implemented,Implemented"
bitfld.long 0x00 7. "EVENT7,Instruction architecturally executed condition check pass  store" "Not implemented,Implemented"
bitfld.long 0x00 6. "EVENT6,Instruction architecturally executed condition check pass  load" "Not implemented,Implemented"
newline
bitfld.long 0x00 5. "EVENT5,Level 1 data TLB refill" "Not implemented,Implemented"
bitfld.long 0x00 4. "EVENT4,Level 1 data cache access" "Not implemented,Implemented"
bitfld.long 0x00 3. "EVENT3,Level 1 data cache refill" "Not implemented,Implemented"
newline
bitfld.long 0x00 2. "EVENT2,Level 1 instruction TLB refill" "Not implemented,Implemented"
bitfld.long 0x00 1. "EVENT1,Level 1 instruction cache refill" "Not implemented,Implemented"
bitfld.long 0x00 0. "EVENT0,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented"
rgroup.long c15:0x7C9++0x0
line.long 0x00 "PMCEID1,Common Event Identification Register 1"
elif corename()=="CORTEXA53"
rgroup.long c15:0x6C9++0x0
line.long 0x00 "PMCEID0,Common Event Identification Register 0"
bitfld.long 0x00 31. "EVENT31,L1 Data cache allocate" "Not implemented,Implemented"
bitfld.long 0x00 30. "EVENT30,Chain" "Not implemented,Implemented"
newline
bitfld.long 0x00 29. "EVENT29,Bus cycle" "Not implemented,Implemented"
bitfld.long 0x00 28. "EVENT28,Instruction architecturally executed condition check pass" "Not implemented,Implemented"
bitfld.long 0x00 27. "EVENT27,Instruction speculatively executed" "Not implemented,Implemented"
newline
bitfld.long 0x00 26. "EVENT26,Local memory error" "Not implemented,Implemented"
bitfld.long 0x00 25. "EVENT25,Bus access" "Not implemented,Implemented"
bitfld.long 0x00 24. "EVENT24,Level 2 data cache write-back" "Not implemented,Implemented"
newline
bitfld.long 0x00 23. "EVENT23,Level 2 data cache refill" "Not implemented,Implemented"
bitfld.long 0x00 22. "EVENT22,Level 2 data cache access" "Not implemented,Implemented"
bitfld.long 0x00 21. "EVENT21,Level 1 data cache write-back" "Not implemented,Implemented"
newline
bitfld.long 0x00 20. "EVENT20,Level 1 instruction cache access" "Not implemented,Implemented"
bitfld.long 0x00 19. "EVENT19,Data memory access" "Not implemented,Implemented"
bitfld.long 0x00 18. "EVENT18,Predictable branch speculatively executed" "Not implemented,Implemented"
newline
bitfld.long 0x00 17. "EVENT17,Cycle" "Not implemented,Implemented"
bitfld.long 0x00 16. "EVENT16,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 15. "EVENT15,Instruction architecturally executed condition check pass  unaligned load or store" "Not implemented,Implemented"
newline
bitfld.long 0x00 14. "EVENT14,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented"
bitfld.long 0x00 13. "EVENT13,Instruction architecturally executed  immediate branch" "Not implemented,Implemented"
bitfld.long 0x00 12. "EVENT12,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented"
newline
bitfld.long 0x00 11. "EVENT11,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented"
bitfld.long 0x00 10. "EVENT10,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented"
bitfld.long 0x00 9. "EVENT9,Exception taken" "Not implemented,Implemented"
newline
bitfld.long 0x00 8. "EVENT8,Instruction architecturally executed" "Not implemented,Implemented"
bitfld.long 0x00 7. "EVENT7,Instruction architecturally executed condition check pass  store" "Not implemented,Implemented"
bitfld.long 0x00 6. "EVENT6,Instruction architecturally executed condition check pass  load" "Not implemented,Implemented"
newline
bitfld.long 0x00 5. "EVENT5,Level 1 data TLB refill" "Not implemented,Implemented"
bitfld.long 0x00 4. "EVENT4,Level 1 data cache access" "Not implemented,Implemented"
bitfld.long 0x00 3. "EVENT3,Level 1 data cache refill" "Not implemented,Implemented"
newline
bitfld.long 0x00 2. "EVENT2,Level 1 instruction TLB refill" "Not implemented,Implemented"
bitfld.long 0x00 1. "EVENT1,Level 1 instruction cache refill" "Not implemented,Implemented"
bitfld.long 0x00 0. "EVENT0,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented"
rgroup.long c15:0x7C9++0x0
line.long 0x00 "PMCEID1,Common Event Identification Register 1"
bitfld.long 0x00 0. "EVENT32,L2D Cache Allocate" "Not implemented,Implemented"
endif
group.long c15:0x020D++0x00
line.long 0x00 "TPIDRURW,User Read/Write Thread ID Register"
group.long c15:0x030D++0x00
line.long 0x00 "TPIDRURO,User Read-Only Thread ID Register"
group.long c15:0x040D++0x00
line.long 0x00 "TPIDRPRW,EL1 only Thread ID Register"
group.long c15:0x420D++0x00
line.long 0x00 "HTPIDR,Hypervisor Software Thread ID Register"
tree.end
tree "System Control and Configuration"
if corename()=="CORTEXA57"
if (((per.l(c15:0x202))&0x80000000)==0x00000000)
group.long c15:0x0001++0x0
line.long 0x0 "SCTLR,System Control Register"
bitfld.long 0x0 30. "TE,T32 exception enable" "A32,T32"
bitfld.long 0x0 29. "AFE,Access Flag Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 28. "TRE,TEX remap enable" "Disabled,Enabled"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x0 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x0 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x0 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x0 6. "THEE,ThumbEE Disable" "No,Yes"
bitfld.long 0x0 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled"
else
group.long c15:0x0001++0x0
line.long 0x0 "SCTLR,Control Register"
bitfld.long 0x0 30. "TE,T32 exception enable" "A32,T32"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x0 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x0 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x0 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x0 6. "THEE,ThumbEE Disable" "No,Yes"
bitfld.long 0x0 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled"
endif
group.quad c15:0x100F0++0x01
line.quad 0x00 "CPUACTLR,CPU Auxiliary Control Register"
bitfld.quad 0x00 63. "FPRCGEC,Force processor RCG enables active" "Not forced,Forced"
bitfld.quad 0x00 59. "DLPDMB,Disable load pass DMB" "No,Yes"
newline
bitfld.quad 0x00 58. "DDMBN,Disable DMB nullification" "No,Yes"
bitfld.quad 0x00 57. "TA,Treat DMB st/stand DMB ld/allas DMB all/all" "Disabled,Enabled"
newline
bitfld.quad 0x00 56. "DL1DCHP,Disable L1 Data Cache hardware prefetcher" "No,Yes"
bitfld.quad 0x00 55. "DLPS,Disable load pass store" "No,Yes"
newline
bitfld.quad 0x00 54. "TGRE,Treat GRE/nGRE as nGnRE" "Disabled,Enabled"
bitfld.quad 0x00 53. "TDMBADSB,Treat DMBand DSBas if their domain field is SY" "Disabled,Enabled"
newline
bitfld.quad 0x00 52. "DORFLDNPI,Disable over-read from LDNP instruction" "No,Yes"
bitfld.quad 0x00 51. "DCDAFEMP,Disable contention detection and fast exclusive monitor path" "No,Yes"
newline
bitfld.quad 0x00 50. "DSSONNCGREEMT,Disable store streaming on NC/GRE memory type" "No,Yes"
bitfld.quad 0x00 49. "DNHOWBNAMT,Disable non-allocate hint of Write-Back No-Allocate (WBNA) memory type" "No,Yes"
newline
bitfld.quad 0x00 48. "DESRAFLSTL2,Disable early speculative read access from LS to L2" "No,Yes"
bitfld.quad 0x00 47. "DL1L2HP,Disable L1/L2 hardware prefetch across 4KB page boundary even if page is 64KB or larger" "No,Yes"
newline
bitfld.quad 0x00 44. "EDCCADCCI,Enable data cache clean as data cache clean/invalidate" "Disabled,Enabled"
bitfld.quad 0x00 39. "DIM,Disable instruction merging" "No,Yes"
newline
bitfld.quad 0x00 38. "FFPSCRWF,Force FPSCR write flush" "Not forced,Forced"
bitfld.quad 0x00 37. "DIGS,Disable instruction group split" "No,Yes"
newline
bitfld.quad 0x00 36. "FIDSBONASBE,Force implicit DSB on an ISB event" "Not forced,Forced"
bitfld.quad 0x00 34. "DSBP,Disable Static Branch Predictor" "No,Yes"
newline
bitfld.quad 0x00 33. "DL1ICWPIMBTB,Disable L1 Instruction Cache way prediction in micro-BTB" "No,Yes"
bitfld.quad 0x00 32. "DL1ICP,Disable L1 Instruction Cache prefetch" "No,Yes"
newline
bitfld.quad 0x00 31. "SDEH,Snoop-delayed exclusive handling" "Disabled,Enabled"
bitfld.quad 0x00 30. "FMCEA,Force main clock enable active" "Not forced,Forced"
newline
bitfld.quad 0x00 29. "FASIMDFPCEA,Force Advanced SIMD and floating-point clock enable active" "Disabled,Enabled"
bitfld.quad 0x00 27.--28. "WSNAT,Write streaming no-allocate threshold" "12th,128th,512th,Disabled"
newline
bitfld.quad 0x00 25.--26. "WSNL1AT,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled"
bitfld.quad 0x00 24. "NCSE,Non-cacheable streaming enhancement" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. "FIORTTSSAW,Force in-order requests to the same set and way" "Not forced,Forced"
bitfld.quad 0x00 22. "FIOLI,Force in-order load issue" "Not forced,Forced"
newline
bitfld.quad 0x00 21. "DL2TLBP,Disable L2 TLB prefetching" "No,Yes"
bitfld.quad 0x00 20. "DL2TTWIPAPAC,Disable L2 translation table walk IPA PA cache" "No,Yes"
newline
bitfld.quad 0x00 19. "DL2S1TTWC,Disable L2 stage 1 translation table walk cache" "No,Yes"
bitfld.quad 0x00 18. "DL2S1TTWL2PAC,Disable L2 stage 1 translation table walk L2 PA cache" "No,Yes"
newline
bitfld.quad 0x00 17. "DL2TLBPO,Disable L2 TLB performance optimization" "No,Yes"
bitfld.quad 0x00 16. "EFSOADLR,Enable full Strongly-ordered and Device load replay" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "FIOIIBEU,Force in-order issue in branch execute unit" "Not forced,Forced"
bitfld.quad 0x00 14. "FLOFOIGCDAPC,Force limit of one instruction group commit/de-allocate per cycle" "Not forced,Forced"
newline
bitfld.quad 0x00 13. "FASPRW,Flush after Special Purpose Register (SPR) writes" "Disabled,Enabled"
bitfld.quad 0x00 12. "FPOSPRS,Force push of SPRs" "Disabled,Enabled"
newline
bitfld.quad 0x00 11. "LTOIPIG,Limit to one instruction per instruction group" "Disabled,Enabled"
bitfld.quad 0x00 10. "FSAEIG,Force serialization after each instruction group" "Not forced,Forced"
newline
bitfld.quad 0x00 9. "DFRO,Disable flag renaming optimization" "No,Yes"
bitfld.quad 0x00 8. "EWFIIAANOPI,Execute WFI instruction as a NOP instruction" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. "EWFEIAANOPI,Execute WFE instruction as a NOP instruction" "Disabled,Enabled"
bitfld.quad 0x00 5. "EPLDPLDWIASNOP,Execute PLDand PLDWinstructions as a NOP" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "DIP,Disable indirect predictor" "No,Yes"
bitfld.quad 0x00 3. "DMBTB,Disable micro-BTB" "No,Yes"
newline
bitfld.quad 0x00 1. "DICMS,Disable Instruction Cache miss streaming" "No,Yes"
bitfld.quad 0x00 0. "EIOBTB,Enable invalidates of BTB" "Disabled,Enabled"
group.quad c15:0x110F0++0x01
line.quad 0x00 "CPUECTLR,CPU Extended Control Register"
bitfld.quad 0x00 38. "DTWDAP,Disable table walk descriptor access prefetch" "No,Yes"
bitfld.quad 0x00 35.--36. "L2IFPD,L2 instruction fetch prefetch distance" "0 lines,1 line,2 lines,3 lines"
newline
bitfld.quad 0x00 32.--33. "L2LSDPD,L2 load/store data prefetch distance" "0 line,2 lines,4 lines,8 lines"
bitfld.quad 0x00 6. "SMPEN,Enable hardware management of data coherency with other processors in the multiprocessor" "Disabled,Enabled"
newline
bitfld.quad 0x00 0.--2. "CPURETCTL,CPU retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.quad c15:0x120F0++0x01
line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
newline
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
newline
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--22. "B/W,Bank/Way" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.quad.tbyte 0x00 0.--17. 1. "INDEX,RAM address"
group.long c15:0x0101++0x0
line.long 0x0 "ACTLR,Auxiliary Control Register"
elif corename()=="CORTEXA53"
group.long c15:0x0001++0x0
line.long 0x0 "SCTLR,Control Register"
bitfld.long 0x0 30. "TE,T32 exception enable" "A32,T32"
bitfld.long 0x0 29. "AFE,Access Flag Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 28. "TRE,TEX remap enable" "Disabled,Enabled"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x0 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x0 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x0 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x0 6. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x0 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled"
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
newline
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad c15:0x100F0++0x01
line.quad 0x00 "CPUACTLR,CPU Auxiliary Control Register"
bitfld.quad 0x00 30. "FPDIDIS,Disable floating-point dual issue" "No,Yes"
bitfld.quad 0x00 29. "DIDIS,Disable Dual Issue" "No,Yes"
newline
bitfld.quad 0x00 27.--28. "RADIS,Write streaming no-allocate threshold" "16th,128th,512th,Disabled"
bitfld.quad 0x00 25.--26. "L1RADIS,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled"
newline
bitfld.quad 0x00 24. "DTAH,Disable Transient allocation hint" "No,Yes"
bitfld.quad 0x00 23. "STBPFRS,Disable ReadUnique request for prefetch streams initiated by STB accesses" "No,Yes"
newline
bitfld.quad 0x00 22. "STBPFDIS,Disable prefetch streams initiated from STB accesses" "No,Yes"
bitfld.quad 0x00 21. "IFUTHDIS,IFU fetch throttle disabled" "No,Yes"
newline
bitfld.quad 0x00 19.--20. "NPFSTRM,Number of independent data prefetch streams" "1 stream,2 streams,3 streams,4 streams"
bitfld.quad 0x00 18. "DSTDIS,Enable device split throttle" "Disabled,Enabled"
newline
bitfld.quad 0x00 17. "STRIDE,Enable stride detection" "Disabled,Enabled"
bitfld.quad 0x00 13.--15. "L1PCTL,L1 Data prefetch control" "Disabled,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 10. "DODMBS,Disable optimized Data Memory Barrier behavior" "No,Yes"
group.quad c15:0x110F0++0x01
line.quad 0x00 "CPUECTLR,CPU Extended Control Register"
bitfld.quad 0x00 6. "SMPEN,Enable hardware management of data coherency with other processors in the multiprocessor" "Disabled,Enabled"
bitfld.quad 0x00 3.--5. "FPRETCTL,Advanced SIMD and Floating-point retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
newline
bitfld.quad 0x00 0.--2. "CPURETCTL,CPU retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.quad c15:0x120F0++0x01
line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
newline
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
newline
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "0,1,2,3,4,5,6,7"
newline
hexmask.quad.word 0x00 0.--11. 1. "RAD,RAM address"
group.long c15:0x0101++0x0
line.long 0x0 "ACTLR,Auxiliary Control Register"
bitfld.long 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled"
bitfld.long 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled"
bitfld.long 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled"
endif
if corename()=="CORTEXA57"
group.long c15:0x0201++0x00
line.long 0x0 "CPACR,Coprocessor Access Control Register"
bitfld.long 0x0 31. "ASEDIS,Disable Advanced SIMD Extension functionality" "No,Yes"
bitfld.long 0x0 28. "TRCDIS,Disable CP14 access to trace registers" "No,Yes"
newline
bitfld.long 0x0 22.--23. "CP11,Coprocessor access control" "Denied,EL1 or higher,Reserved,Full"
bitfld.long 0x0 20.--21. "CP10,Coprocessor access control" "Denied,EL1 or higher,Reserved,Full"
elif corename()=="CORTEXA53"
group.long c15:0x201++0x00
line.long 0x0 "CPACR,Coprocessor Access Control Register"
bitfld.long 0x0 31. "ASEDIS,Disable Advanced SIMD Extension functionality" "No,Yes"
bitfld.long 0x0 22.--23. "CP11,Coprocessor access control" "Denied,EL1 only,Reserved,Full"
newline
bitfld.long 0x0 20.--21. "CP10,Coprocessor access control" "Denied,EL1 only,Reserved,Full"
endif
group.long c15:0x0011++0x0
line.long 0x00 "SCR,Secure Configuration Register"
bitfld.long 0x00 13. "TWE,Trap WFE Instructions" "Not trapped,Trapped"
bitfld.long 0x00 12. "TWI,Trap WFI Instructions" "Not trapped,Trapped"
newline
bitfld.long 0x00 9. "SIF,Secure Instruction Fetch" "Permitted,Not permitted"
bitfld.long 0x00 8. "HCE,Hypervisor Call enable" "No,Yes"
newline
bitfld.long 0x00 7. "SCD,Secure Monitor Call disable" "No,Yes"
bitfld.long 0x00 5. "AW,Controls whether the Non-secure world can modify the A-bit in the CPSR" "Not allowed,Allowed"
newline
bitfld.long 0x00 4. "FW,Controls whether the Non-secure world can modify the F-bit in the CPSR" "Not allowed,Allowed"
bitfld.long 0x00 3. "EA,External Abort  exceptions handled in Abort mode or Monitor mode" "Abort,Monitor"
newline
bitfld.long 0x00 2. "FIQ,FIQ exceptions handled in Abort mode or Monitor mode" "FIQ,Monitor"
bitfld.long 0x00 1. "IRQ,IRQ exceptions handled in Abort mode or Monitor mode" "IRQ,Monitor"
newline
bitfld.long 0x00 0. "NS,Secure mode " "Secure,Non-secure"
group.long c15:0x0111++0x00
line.long 0x00 "SDER,Secure Debug Enable Register"
bitfld.long 0x00 1. "SUNIDEN,Non-Invasive Secure User Debug Enable bit" "Denied,Permitted"
bitfld.long 0x00 0. "SUIDEN,Invasive Secure User Debug Enable bit" "Denied,Permitted"
group.long c15:0x0131++0x00
line.long 0x00 "SDCR,Secure Debug Control Register"
bitfld.long 0x00 21. "EPMAD,External debugger access to Performance Monitors registers disabled" "No,Yes"
bitfld.long 0x00 20. "EDAD,External debugger access to breakpoint and watchpoint registers disabled" "No,Yes"
newline
bitfld.long 0x00 17. "SPME,Secure performance monitors enable" "Disabled,Enabled"
bitfld.long 0x00 14.--15. "SPD,AArch32 secure privileged debug" "Legacy,Reserved,Disabled,Enabled"
group.long c15:0x0211++0x00
line.long 0x00 "NSACR,Non-Secure Access Control Register"
bitfld.long 0x00 15. "NSASEDIS,Disable Non-secure Advanced SIMD Extension functionality" "No,Yes"
bitfld.long 0x00 11. "CP11,Coprocessor 11 in the Non-secure World Access Permission" "Denied,Permitted"
newline
bitfld.long 0x00 10. "CP10,Coprocessor 10 in the Non-secure World Access Permission" "Denied,Permitted"
if corename()=="CORTEXA57"
group.long c15:0x000C++0x00
line.long 0x00 "VBAR,Vector Base Address Register"
hexmask.long 0x00 5.--31. 0x20 "VBA,Vector Base Address"
group.long c15:0x010C++0x00
line.long 0x00 "MVBAR,Monitor Vector Base Address Register"
hexmask.long 0x00 5.--31. 0x20 "VBA,Vector Base Address"
elif corename()=="CORTEXA53"
group.long c15:0x000C++0x00
line.long 0x00 "VBAR,Vector Base Address Register"
group.long c15:0x010C++0x00
line.long 0x00 "MVBAR,Monitor Vector Base Address Register"
endif
rgroup.long c15:0x001C++0x00
line.long 0x00 "ISR,Interrupt Status Register"
bitfld.long 0x00 8. "A,External abort pending flag" "Not pending,Pending"
bitfld.long 0x00 7. "I,Interrupt pending flag" "Not pending,Pending"
newline
bitfld.long 0x00 6. "F,Fast interrupt pending flag" "Not pending,Pending"
group.long c15:0x020C++0x00
line.long 0x00 "RMR,Reset Management Register"
bitfld.long 0x00 1. "RR,Reset Request" "Not requested,Requested"
bitfld.long 0x00 0. "AA64,Determines which execution state the processor boots into after a warm reset" "AArch32,AArch64"
group.long c15:0x0015++0x00
line.long 0x00 "ADFSR,Auxiliary Data Fault Status Register"
group.long c15:0x0115++0x00
line.long 0x00 "AIFSR,Auxiliary Instruction Fault Status Register"
if corename()=="CORTEXA57"
if (((per.l(c15:0x202))&0x80000000)==0x80000000)
group.long c15:0x0005++0x00
line.long 0x00 "DFSR,Data Fault Status Register"
bitfld.long 0x00 15. "UA,Unattributable fault" "Attributable,Unattributable"
bitfld.long 0x00 14. "UC,Uncontainable fault" "Containable,Uncontainable"
newline
bitfld.long 0x00 13. "CM,Cache maintenance fault" "Not aborted,Aborted"
bitfld.long 0x00 12. "EXT,External Abort Qualifier" "DECERR,SLVERR"
newline
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Disabled,Enabled"
bitfld.long 0x00 0.--5. "STATUS,Fault Status" "Address size/TTBR0/TTBR1,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Access flag/0th level,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Permission/0th level,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Async. external,Reserved,Reserved,Sync. external/on TTW/0th level,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity/on memory access,Async. parity/on memory access,Reserved,Reserved,Sync. parity/on memory access/on TTW/0th level,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,?..."
else
group.long c15:0x0005++0x00
line.long 0x00 "DFSR,Data Fault Status Register"
bitfld.long 0x00 15. "UA,Unattributable fault" "Attributable,Unattributable"
bitfld.long 0x00 14. "UC,Uncontainable fault" "Containable,Uncontainable"
newline
bitfld.long 0x00 13. "CM,Cache maintenance fault" "Not aborted,Aborted"
bitfld.long 0x00 12. "EXT,External Abort Qualifier" "DECERR,SLVERR"
newline
bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--7. "DOMAIN,Domain Accessed When a Data Fault Occurs" "D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15"
bitfld.long 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Alignment,Debug event,Access flag/1st level,Reserved,Translation/1st level,Access flag/2nd level,Translation/1st level,Sync. external/non-translation,Domain/1st level,Reserved,Domain/2nd level,Sync. external/1st level,Permission/1nd level,Sync. external/2nd level,Permission/2nd level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async. external,Reserved,Async. parity,Sync. parity,Reserved,Reserved,Sync. parity/1st level,Reserved,Sync. parity/2nd level,?..."
endif
elif corename()=="CORTEXA53"
if (((per.l(c15:0x202))&0x80000000)==0x80000000)
group.long c15:0x0005++0x00
line.long 0x00 "DFSR,Data Fault Status Register"
bitfld.long 0x00 13. "CM,Cache maintenance fault" "Not aborted,Aborted"
bitfld.long 0x00 12. "EXT,External Abort Qualifier" "DECERR,SLVERR"
newline
bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write"
bitfld.long 0x00 0.--5. "STATUS,Fault Status" "Reserved,Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity/on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Reserved,LDREX/STREX,?..."
else
group.long c15:0x0005++0x00
line.long 0x00 "DFSR,Data Fault Status Register"
bitfld.long 0x00 13. "CM,Cache maintenance fault" "Not aborted,Aborted"
bitfld.long 0x00 12. "EXT,External Abort Qualifier" "DECERR,SLVERR"
newline
bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write"
bitfld.long 0x00 4.--7. "DOMAIN,Domain Accessed When a Data Fault Occurs" "D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15"
newline
bitfld.long 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Alignment,Debug event,Access flag/section,Instruction cache maintenance,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/1st level,Permission/section,Sync. external/2nd level,Permission/2nd level,TLB conflict,Reserved,Reserved,Reserved,Reserved,LDREX or STREX,Async. external,Reserved,Async. parity,Sync. parity,Reserved,Reserved,Sync. parity/1st level,Reserved,Sync. parity/2nd level,?..."
endif
endif
if corename()=="CORTEXA57"
if (((per.l(c15:0x202))&0x80000000)==0x80000000)
group.long c15:0x0105++0x00
line.long 0x00 "IFSR,Instruction Fault Status Register"
bitfld.long 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--5. "STATUS,Fault Status" "Address size/TTBR0/TTBR1,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Access flag/0th level,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Permission/0th level,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity/on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,?..."
else
group.long c15:0x0105++0x00
line.long 0x00 "IFSR,Instruction Fault Status Register"
bitfld.long 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Alignment,Debug event,Access flag/1st level,Reserved,Translation/1st level,Access flag/2nd level,Translation/2nd level,Sync. external/non-translation,Domain/1st level,Reserved,Domain/2nd level,Sync. external/on TTW/1st level,Permission/1st level,Sync. external/on TTW/2nd level,Permission/2nd level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
elif corename()=="CORTEXA53"
if (((per.l(c15:0x202))&0x80000000)==0x80000000)
group.long c15:0x0105++0x00
line.long 0x00 "IFSR,Instruction Fault Status Register"
bitfld.long 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--5. "STATUS,Fault Status" "Address size/TTBR0/TTBR1,Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity/on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..."
else
group.long c15:0x0105++0x00
line.long 0x00 "IFSR,Instruction Fault Status Register"
bitfld.long 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Reserved,Debug event,Access flag/section,Reserved,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/on TTW/1st level,Permission/section,Sync. external/on TTW/2nd level,Permission/page,TLB conflict,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
endif
group.long c15:0x0006++0x00
line.long 0x00 "DFAR,Data Fault Address Register"
group.long c15:0x0206++0x00
line.long 0x00 "IFAR,Instruction Fault Address Register"
if corename()=="CORTEXA57"
rgroup.long c15:0x103F++0x00
line.long 0x00 "CBAR,Configuration Base Address Register"
hexmask.long.word 0x00 18.--31. 1. "PERIPHBASE[31:18],Periphbase[31:18]"
hexmask.long.word 0x00 0.--11. 1. "PERIPHBASE[42:32],Periphbase[42:32]"
elif corename()=="CORTEXA53"
rgroup.long c15:0x103F++0x00
line.long 0x00 "CBAR,Configuration Base Address Register"
hexmask.long.word 0x00 18.--31. 1. "PERIPHBASE[31:18],Periphbase[31:18]"
hexmask.long.byte 0x00 0.--7. 1. "PERIPHBASE[39:32],Periphbase[39:32]"
endif
group.long c15:0x000D++0x00
line.long 0x00 "FCSEIDR,FCSE Process ID register"
group.long c15:0x020D++0x00
line.long 0x00 "TPIDRURW,PL0 Read/Write Software Thread ID Register"
group.long c15:0x030D++0x00
line.long 0x00 "TPIDRURO,PL0 Read-Only Software Thread ID Register"
group.long c15:0x040D++0x00
line.long 0x00 "TPIDRPRW,PL1 Software Thread ID Register"
tree.end
tree "Memory Management Unit"
if corename()=="CORTEXA57"
group.long c15:0x0001++0x0
line.long 0x0 "SCTLR,Control Register"
bitfld.long 0x0 30. "TE,T32 exception enable" "A32,T32"
bitfld.long 0x0 29. "AFE,Access Flag Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 28. "TRE,TEX remap enable" "Disabled,Enabled"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x0 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x0 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x0 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x0 6. "THEE,ThumbEE Disable" "No,Yes"
bitfld.long 0x0 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.long c15:0x4001++0x0
line.long 0x00 "HSCTLR,System Control Register"
bitfld.long 0x0 30. "TE,Thumb exception enable" "ARM,Thumb"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 21. "FI,Fast Interrupts configuration enable" "Disabled,Enabled"
bitfld.long 0x0 19. "WXN,Write permission implies XN" "Not forced,Forced"
newline
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
newline
bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes"
bitfld.long 0x0 5. "CP15BEN,CP15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,Enable address translation" "Disabled,Enabled"
if (((per.l(c15:0x0202))&0x80000000)==0x00000000)
// MPIDR[31]==1 case is missing here for TTBR0 and TTBR1
group.long c15:0x0002++0x00
line.long 0x00 "TTBR0,Translation Table Base Registers"
hexmask.long 0x00 6.--31. 0x40 "TTB1,Translation table base address"
bitfld.long 0x00 5. "NOS,Not outer shareable bit" "Outer,Inner"
newline
bitfld.long 0x00 3.--4. "RGN,Region" "Normal,Outer Write-Back Write-Allocate Cacheable,Outer Write-Through Cacheable,Outer Write-Back no Write-Allocate Cacheable"
bitfld.long 0x00 2. "IMP,Implementation" "Low,High"
newline
bitfld.long 0x00 1. "S,Shareable" "Non-shareable,Shareable"
bitfld.long 0x00 0. "C,Cacheable" "Non-cacheable,Cacheable"
group.long c15:0x0102++0x00
line.long 0x00 "TTBR1,Translation Table Base Registers"
hexmask.long 0x00 6.--31. 0x40 "TTBA,Translation table base address"
bitfld.long 0x00 5. "NOS,Not outer shareable bit" "Outer,Inner"
newline
bitfld.long 0x00 3.--4. "RGN,Region" "Normal,Outer Write-Back Write-Allocate Cacheable,Outer Write-Through Cacheable,Outer Write-Back no Write-Allocate Cacheable"
bitfld.long 0x00 2. "IMP,Implementation" "Low,High"
newline
bitfld.long 0x00 1. "S,Shareable" "Non-shareable,Shareable"
bitfld.long 0x00 0. "C,Cacheable" "Non-cacheable,Cacheable"
else
group.quad c15:0x10020++0x01
line.quad 0x00 "TTBR0,Translation Table Base Registers"
hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
group.quad c15:0x11020++0x01
line.quad 0x00 "TTBR1,Translation Table Base Registers"
hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
endif
if (((per.l(c15:0x0202))&0x80000000)==0x00000000)
group.long c15:0x0202++0x00
line.long 0x00 "TTBCR,Translation Table Base Control Register"
bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit"
bitfld.long 0x00 5. "PD1,Translation table walk disable for translations using TTBR1" "No,Yes"
newline
bitfld.long 0x00 4. "PD0,Translation table walk disable for translations using TTBR0" "No,Yes"
bitfld.long 0x00 0.--2. "N,Width of the base address held in TTBR0" "0,1,2,3,4,5,6,7"
else
group.long c15:0x0202++0x00
line.long 0x00 "TTBCR,Translation Table Base Control Register"
bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit"
bitfld.long 0x00 28.--29. "SH1,Shareability attributes for the memory associated with the translation table walks using TTBR1" "Non-Shareable,Reserved,Non-Shareable,Inner Shareable"
newline
bitfld.long 0x00 26.--27. "ORGN1,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR1" "0,1,2,3"
bitfld.long 0x00 24.--25. "IRGN1,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR1" "0,1,2,3"
newline
bitfld.long 0x00 23. "EPD1,Translation Walk Disable for TTBR1" "No,Yes"
bitfld.long 0x00 22. "A1,Select ASID from TTBR1 ASID field" "Selected,Not selected"
newline
bitfld.long 0x00 16.--18. "T1SZ,The Size offset of the TTBR1 addressed region" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Non-Shareable,Inner Shareable"
newline
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
newline
bitfld.long 0x00 7. "EPD0,Translation Walk Disable for TTBR0 region" "No,Yes"
bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7"
endif
elif corename()=="CORTEXA53"
group.long c15:0x0001++0x0
line.long 0x0 "SCTLR,Control Register"
bitfld.long 0x0 30. "TE,T32 exception enable" "A32,T32"
bitfld.long 0x0 29. "AFE,Access Flag Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 28. "TRE,TEX remap enable" "Disabled,Enabled"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x0 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x0 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x0 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x0 6. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x0 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled"
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
newline
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.long c15:0x4001++0x0
line.long 0x00 "HSCTLR,System Control Register"
bitfld.long 0x0 30. "TE,Thumb exception enable" "ARM,Thumb"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 21. "FI,Fast Interrupts configuration enable" "Disabled,Enabled"
bitfld.long 0x0 19. "WXN,Write permission implies XN" "Not forced,Forced"
newline
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
newline
bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes"
bitfld.long 0x0 5. "CP15BEN,CP15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,Enable address translation" "Disabled,Enabled"
if (((per.l(c15:0x202))&0x80000000)==0x80000000)
group.quad c15:0x10020++0x01
line.quad 0x00 "TTBR0,Translation Table Base Register 0"
hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
group.quad c15:0x11020++0x01
line.quad 0x00 "TTBR1,Translation Table Base Register 1"
hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
group.long c15:0x0202++0x00
line.long 0x00 "TTBCR,Translation Table Base Control Register"
bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit"
bitfld.long 0x00 28.--29. "SH1,Shareability attributes for the memory associated with the translation table walks using TTBR1" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.long 0x00 26.--27. "ORGN1,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR1" "0,1,2,3"
bitfld.long 0x00 24.--25. "IRGN1,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR1" "0,1,2,3"
newline
bitfld.long 0x00 23. "EPD1,Translation Walk Disable for TTBR1" "No,Yes"
bitfld.long 0x00 22. "A1,Select ASID from TTBR1 ASID field" "Selected,Not selected"
newline
bitfld.long 0x00 16.--18. "T1SZ,The Size offset of the TTBR1 addressed region" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
newline
bitfld.long 0x00 7. "EPD0,Translation Walk Disable for TTBR0 region" "No,Yes"
bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7"
else
group.long c15:0x0002++0x00
line.long 0x00 "TTBR0,Translation Table Base Register 0"
hexmask.long 0x00 7.--31. 0x80 "TTB0,Translation table base 0 address"
bitfld.long 0x00 6. 0. "IRGN,Inner region bits" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.long 0x00 5. "NOS,Not Outer Shareable bit" "Outer,Inner"
bitfld.long 0x00 3.--4. "RGN,RGN" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.long 0x00 1. "S,Shareable bit" "Non-shareable,Shareable"
group.long c15:0x0102++0x00
line.long 0x00 "TTBR1,Translation Table Base Register 1"
hexmask.long 0x00 7.--31. 0x80 "TTB1,Translation table base 1 address"
bitfld.long 0x00 0. 6. "IRGN,Inner region bits" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.long 0x00 5. "NOS,Not Outer Shareable bit" "Outer,Inner"
bitfld.long 0x00 3.--4. "RGN,RGN" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.long 0x00 1. "S,Shareable bit" "Non-shareable,Shareable"
group.long c15:0x0202++0x00
line.long 0x00 "TTBCR,Translation Table Base Control Register"
bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit"
bitfld.long 0x00 5. "PD1,Translation table walk disable for translations using TTBR1" "No,Yes"
newline
bitfld.long 0x00 4. "PD0,Translation table walk disable for translations using TTBR0" "No,Yes"
bitfld.long 0x00 0.--2. "N,Width of the base address held in TTBR0" "0,1,2,3,4,5,6,7"
endif
endif
if corename()=="CORTEXA57"
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
elif corename()=="CORTEXA53"
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
endif
group.long c15:0x4202++0x00
line.long 0x00 "HTCR,Hypervisor Translation Control Register"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7"
group.long c15:0x0003++0x00
line.long 0x00 "DACR,Domain Access Control Register"
bitfld.long 0x0 30.--31. "D15,Domain Access 15" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 28.--29. "D14,Domain Access 14" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 26.--27. "D13,Domain Access 13" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 24.--25. "D12,Domain Access 12" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 22.--23. "D11,Domain Access 11" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 20.--21. "D10,Domain Access 10" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 18.--19. "D9,Domain Access 9" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 16.--17. "D8,Domain Access 8" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 14.--15. "D7,Domain Access 7" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 12.--13. "D6,Domain Access 6" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 10.--11. "D5,Domain Access 5" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 8.--9. "D4,Domain Access 4" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 6.--7. "D3,Domain Access 3" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 4.--5. "D2,Domain Access 2" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x0 2.--3. "D1,Domain Access 1" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 0.--1. "D0,Domain Access 0" "Denied,Client,Reserved,Manager"
if (((per.l(c15:0x202))&0x80000000)==0x80000000)
group.quad c15:0x10070++0x01
line.quad 0x00 "PAR,Physical Address Register"
else
group.long c15:0x0047++0x00
line.long 0x00 "PAR,Physical Address Register"
endif
tree.open "Memory Attribute Indirection Registers"
group.long c15:0x403A++0x00
line.long 0x00 "HAMAIR0,Hypervisor Auxiliary Memory Attribute Indirection Register 0"
group.long c15:0x413A++0x00
line.long 0x00 "HAMAIR1,Hypervisor Auxiliary Memory Attribute Indirection Register 1"
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x003A++0x00
line.long 0x00 "AMAIR0,Auxiliary Memory Attribute Indirection Register 0"
group.long c15:0x013A++0x00
line.long 0x00 "AMAIR1,Auxiliary Memory Attribute Indirection Register 1"
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
if (((per.l(c15:0x202))&0x80000000)==0x00000000)
group.long c15:0x002A++0x0
line.long 0x00 "PRRR,Primary Region Remap Register"
bitfld.long 0x00 31. "NOS7,Outer Shareable property mapping for memory attributes" "Outer,Inner"
bitfld.long 0x00 30. "NOS6,Outer Shareable property mapping for memory attributes" "Outer,Inner"
newline
bitfld.long 0x00 29. "NOS5,Outer Shareable property mapping for memory attributes" "Outer,Inner"
bitfld.long 0x00 28. "NOS4,Outer Shareable property mapping for memory attributes" "Outer,Inner"
newline
bitfld.long 0x00 27. "NOS3,Outer Shareable property mapping for memory attributes" "Outer,Inner"
bitfld.long 0x00 26. "NOS2,Outer Shareable property mapping for memory attributes" "Outer,Inner"
newline
bitfld.long 0x00 25. "NOS1,Outer Shareable property mapping for memory attributes" "Outer,Inner"
bitfld.long 0x00 24. "NOS0,Outer Shareable property mapping for memory attributes" "Outer,Inner"
newline
bitfld.long 0x00 19. "NS1,Shareable Attribute Remap when S=1 for Normal Regions" "Remapped,Not remapped"
bitfld.long 0x00 18. "NS0,Shareable Attribute Remap when S=0 for Normal Regions" "Not remapped,Remapped"
newline
bitfld.long 0x00 17. "DS1,Shareable Attribute Remap when S=1 for Device regions" "Remapped,Not remapped"
bitfld.long 0x00 16. "DS0,Shareable Attribute Remap when S=0 for Device regions" "Not remapped,Remapped"
newline
bitfld.long 0x00 14.--15. "TR7,{TEX[0] C B} = b111 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
bitfld.long 0x00 12.--13. "TR6,{TEX[0] C B} = b110 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
newline
bitfld.long 0x00 10.--11. "TR5,{TEX[0] C B} = b101 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
bitfld.long 0x00 8.--9. "TR4,{TEX[0] C B} = b100 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
newline
bitfld.long 0x00 6.--7. "TR3,{TEX[0] C B} = b011 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
bitfld.long 0x00 4.--5. "TR2,{TEX[0] C B} = b010 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
newline
bitfld.long 0x00 2.--3. "TR1,{TEX[0] C B} = b001 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
bitfld.long 0x00 0.--1. "TR0,{TEX[0] C B} = b000 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
group.long c15:0x012A++0x0
line.long 0x00 "NMRR,Normal Memory Remap Register"
bitfld.long 0x00 30.--31. "OR7,Outer Attribute for {TEX[0] C B} = b111 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 28.--29. "OR6,Outer Attribute for {TEX[0] C B} = b110 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 26.--27. "OR5,Outer Attribute for {TEX[0] C B} = b101 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 24.--25. "OR4,Outer Attribute for {TEX[0] C B} = b100 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 22.--23. "OR3,Outer Attribute for {TEX[0] C B} = b011 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 20.--21. "OR2,Outer Attribute for {TEX[0] C B} = b010 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 18.--19. "OR1,Outer Attribute for {TEX[0] C B} = b001 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 16.--17. "OR0,Outer Attribute for {TEX[0] C B} = b000 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 14.--15. "IR7,Inner attribute for {TEX[0] C B} = b111 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 12.--13. "IR6,Inner attribute for {TEX[0] C B} = b110 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 10.--11. "IR5,Inner attribute for {TEX[0] C B} = b101 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 8.--9. "IR4,Inner attribute for {TEX[0] C B} = b100 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 6.--7. "IR3,Inner attribute for {TEX[0] C B} = b011 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 4.--5. "IR2,Inner attribute for {TEX[0] C B} = b010 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 2.--3. "IR1,Inner attribute for {TEX[0] C B} = b001 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 0.--1. "IR0,Inner attribute for {TEX[0] C B} = b000 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
endif
tree.end
newline
if (((per.l(c15:0x202))&0x80000000)==0x00000000)
group.long c15:0x10d++0x00
line.long 0x00 "CONTEXTIDR,Context ID Register"
else
group.long c15:0x10d++0x00
line.long 0x00 "CONTEXTIDR,Context ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. "PROCID,Process identifier"
hexmask.long.byte 0x00 0.--7. 1. "ASID,Address space identifier"
endif
tree.end
tree "Virtualization Extensions"
group.long c15:0x4000++0x0
line.long 0x00 "VPIDR,Virtualization Processor ID Register"
group.long c15:0x4500++0x00
line.long 0x00 "VMPIDR,Virtualization Multiprocessor ID Register"
group.long c15:0x420D++0x00
line.long 0x00 "HTPIDR,Hypervisor Software Thread ID Register"
group.long c15:0x4001++0x0
line.long 0x00 "HSCTLR,System Control Register"
bitfld.long 0x0 30. "TE,Thumb exception enable" "ARM,Thumb"
bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x0 21. "FI,Fast Interrupts configuration enable" "Disabled,Enabled"
bitfld.long 0x0 19. "WXN,Write permission implies XN" "Not forced,Forced"
newline
bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes"
newline
bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes"
bitfld.long 0x0 5. "CP15BEN,CP15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x0 0. "M,Enable address translation" "Disabled,Enabled"
group.long c15:0x4101++0x00
line.long 0x00 "HACTLR,Hypervisor Auxiliary Control Register"
bitfld.long 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled"
bitfld.long 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled"
bitfld.long 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled"
if corename()=="CORTEXA57"
group.long c15:0x4011++0x00
line.long 0x00 "HCR,Hypervisor Configuration Register"
bitfld.long 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled"
bitfld.long 0x00 27. "TGE,Trap General Exceptions" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "TVM,Trap Virtual Memory Controls" "Disabled,Enabled"
bitfld.long 0x00 25. "TTLB,Trap TLB maintenance instructions" "Disabled,Enabled"
newline
bitfld.long 0x00 24. "TPU,Trap Cache maintenance instructions to point of unification" "Disabled,Enabled"
bitfld.long 0x00 23. "TPC,Trap Data/Unified cache maintenance instructions to point of coherency" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "TSW,Trap Data/Unified cache Set/Way instructions" "Disabled,Enabled"
bitfld.long 0x00 21. "TAC,Trap Auxiliary Control Register Accesses" "Disabled,Enabled"
newline
bitfld.long 0x00 20. "TIDCP,Trap Lockdown" "Disabled,Enabled"
bitfld.long 0x00 19. "TSC,Trap SMC" "Disabled,Enabled"
newline
bitfld.long 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
bitfld.long 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
bitfld.long 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
newline
bitfld.long 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
bitfld.long 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "DC,Default Cacheable" "Disabled,Enabled"
bitfld.long 0x00 10.--11. "BSU,Barrier Shareability Upgrade" "0,1,2,3"
newline
bitfld.long 0x00 9. "FB,Force Broadcast of TLB maintenance BPIALL and ICIALLU instructions" "Disabled,Enabled"
bitfld.long 0x00 8. "VA,Virtual External Asynchronous Abort" "Not aborted,Aborted"
newline
bitfld.long 0x00 7. "VI,Virtual IRQ interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 6. "VF,Virtual FIQ interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 5. "AMO,A-bit Mask Override" "Not routed,Routed"
bitfld.long 0x00 4. "IMO,I-bit Mask Override" "Not routed,Routed"
newline
bitfld.long 0x00 3. "FMO,F-bit Mask Override" "Not routed,Routed"
bitfld.long 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "SWIO,Set/Way Invalidation Override" "No override,Override"
bitfld.long 0x00 0. "VM,Second Stage of Translation Enable" "Disabled,Enabled"
elif corename()=="CORTEXA53"
group.long c15:0x4011++0x00
line.long 0x00 "HCR,Hypervisor Configuration Register"
bitfld.long 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled"
bitfld.long 0x00 29. "HCD,Hypervisor Call Disable" "No,Yes"
newline
bitfld.long 0x00 27. "TGE,Trap General Exceptions" "Disabled,Enabled"
bitfld.long 0x00 26. "TVM,Trap Virtual Memory Controls" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "TTLB,Trap TLB maintenance instructions" "Disabled,Enabled"
bitfld.long 0x00 24. "TPU,Trap Cache maintenance instructions to point of unification" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "TPC,Trap Data/Unified cache maintenance instructions to point of coherency" "Disabled,Enabled"
bitfld.long 0x00 22. "TSW,Trap Data/Unified cache Set/Way instructions" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "TAC,Trap Auxiliary Control Register Accesses" "Disabled,Enabled"
bitfld.long 0x00 20. "TIDCP,Trap Lockdown" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "TSC,Trap SMC" "Disabled,Enabled"
bitfld.long 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
newline
bitfld.long 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
bitfld.long 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
bitfld.long 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
bitfld.long 0x00 12. "DC,Default Cacheable" "Disabled,Enabled"
newline
bitfld.long 0x00 10.--11. "BSU,Barrier Shareability Upgrade" "0,1,2,3"
bitfld.long 0x00 9. "FB,Force Broadcast of TLB maintenance BPIALL and ICIALLU instructions" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "VA,Virtual External Asynchronous Abort" "No aborted,Aborted"
bitfld.long 0x00 7. "VI,Virtual IRQ interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. "VF,Virtual FIQ interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "AMO,A-bit Mask Override" "No override,Override"
newline
bitfld.long 0x00 4. "IMO,I-bit Mask Override" "No override,Override"
bitfld.long 0x00 3. "FMO,F-bit Mask Override" "No override,Override"
newline
bitfld.long 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled"
bitfld.long 0x00 1. "SWIO,Set/Way Invalidation Override" "No override,Override"
newline
bitfld.long 0x00 0. "VM,Second Stage of Translation Enable" "Disabled,Enabled"
endif
group.long c15:0x4411++0x00
line.long 0x00 "HCR2,Hypervisor Configuration Register 2"
bitfld.long 0x00 1. "ID,Stage 2 Instruction cache disable" "No,Yes"
bitfld.long 0x00 0. "CD,Stage 2 Data cache disable" "No,Yes"
group.long c15:0x4111++0x00
line.long 0x00 "HDCR,Hypervisor Debug Control Register"
bitfld.long 0x00 11. "TDRA,Trap Debug ROM Access" "No effect,Valid"
bitfld.long 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid"
newline
bitfld.long 0x00 9. "TDA,Trap Debug Access" "No effect,Valid"
bitfld.long 0x00 8. "TDE,Trap Debug Exceptions" "No effect,Valid"
newline
bitfld.long 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid"
newline
bitfld.long 0x00 5. "TPMCR,Trap Performance Monitor Control Register accesses" "No effect,Valid"
bitfld.long 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long c15:0x4211++0x00
line.long 0x00 "HCPTR,Hypervisor Architectural Feature Trap Register"
bitfld.long 0x0 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped"
bitfld.long 0x0 20. "TTA,Trap Trace Access" "Not trapped,?..."
newline
bitfld.long 0x0 15. "TASE,Trap Advanced SIMD extensions" "Not trapped,Trapped"
bitfld.long 0x0 11. "TCP11,Trap coprocessor 11" "Not trapped,Trapped"
newline
bitfld.long 0x0 10. "TCP10,Trap coprocessor 10" "Not trapped,Trapped"
group.long c15:0x4311++0x00
line.long 0x00 "HSTR,Hypervisor System Trap Register"
bitfld.long 0x00 16. "TTEE,Trap ThumbEE" "Disabled,Enabled"
bitfld.long 0x00 15. "T15,Trap to Hypervisor mode Non-secure priv 15" "Reserved,?..."
newline
hexmask.long.word 0x00 5.--13. 1. "T4_15,Trap to Hypervisor mode Non-secure priv 5 - 13"
bitfld.long 0x00 0.--3. "T0_13,Trap to Hypervisor mode Non-secure priv 0 - 3," "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long c15:0x4711++0x00
line.long 0x00 "HACR,Hypervisor Auxiliary Configuration Register"
if corename()=="CORTEXA57"
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
elif corename()=="CORTEXA53"
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
endif
group.long c15:0x4202++0x00
line.long 0x00 "HTCR,Hypervisor Translation Control Register"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7"
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
group.long c15:0x4212++0x00
line.long 0x00 "VTCR,Virtualization Translation Control Register"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using VTTBR" "0,1,2,3"
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using VTTBR" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks VTTBR" "0,1,2,3"
bitfld.long 0x00 6.--7. "SL0,Starting Level for VTCR addressed region" "0,1,2,3"
newline
bitfld.long 0x00 4. "S,Sign-extension of the T0SZ field" "Low,High"
bitfld.long 0x00 0.--3. "T0SZ,The Size offset of the VTCR addressed region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long c15:0x4015++0x00
line.long 0x00 "HADFSR,Hypervisor Auxiliary Data Fault Status Syndrome Register"
group.long c15:0x4115++0x00
line.long 0x00 "HAIFSR,Hypervisor Auxiliary Instruction Fault Status Syndrome Register"
group.long c15:0x4006++0x00
line.long 0x00 "HDFAR,Hypervisor Data Fault Address Register"
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Exception class" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to c15,Trapped MCRR/MRRC to c15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC,Trapped Jazelle instruction,Trapped BXJ,Reserved,Trapped MRRC,Reserved,Reserved,Reserved,Reserved,SVC,HVC,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,Reserved,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..."
bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit"
newline
hexmask.long 0x00 0.--24. 1. "ISS,Instruction specific syndrome"
group.long c15:0x4206++0x00
line.long 0x00 "HIFAR,Hypervisor Instruction Fault Address Register"
group.long c15:0x4406++0x00
line.long 0x00 "HPFAR,Hypervisor IPA Fault Address Register"
hexmask.long 0x00 4.--31. 1. "FIPA[39:12],Bits [39:12] of the faulting intermediate physical address"
tree.open "Hypervisor Memory Attribute Indirection Registers"
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x403A++0x00
line.long 0x00 "HAMAIR0,Hypervisor Auxiliary Memory Attribute Indirection Register 0"
group.long c15:0x413A++0x00
line.long 0x00 "HAMAIR1,Hypervisor Auxiliary Memory Attribute Indirection Register 1"
tree.end
newline
group.long c15:0x400C++0x00
line.long 0x00 "HVBAR,Hypervisor Vector Base Address Register"
hexmask.long 0x00 5.--31. 0x20 "HVBADDR,Hypervisor Vector Base Address"
tree.end
tree "Cache Control and Configuration"
rgroup.long c15:0x0100++0x0
line.long 0x0 "CTR,Cache Type Register"
bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,VIPT,PIPT"
newline
bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
if corename()=="CORTEXA57"
rgroup.long c15:0x1100++0x0
line.long 0x0 "CLIDR,Cache Level ID Register"
bitfld.long 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Reserved,Level 1,?..."
bitfld.long 0x00 24.--26. "LOC,Level of Coherency" "Reserved,Reserved,Level 3,?..."
bitfld.long 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Reserved,Level 2,?..."
newline
bitfld.long 0x00 18.--20. "CTYPE7,Cache type for levels 7" "No cache,?..."
bitfld.long 0x00 15.--17. "CTYPE6,Cache type for levels 6" "No cache,?..."
bitfld.long 0x00 12.--14. "CTYPE5,Cache type for levels 5" "No cache,?..."
newline
bitfld.long 0x00 9.--11. "CTYPE4,Cache type for levels 4" "No cache,?..."
bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..."
bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "Reserved,Reserved,Reserved,Reserved,Unified,?..."
newline
bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate Inst/Data,?..."
elif corename()=="CORTEXA53"
rgroup.long c15:0x1100++0x0
line.long 0x0 "CLIDR,Cache Level ID Register"
bitfld.long 0x00 30.--31. "ICB,Inner cache boundary" "Not disclosed,?..."
bitfld.long 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Reserved,Level 1,?..."
bitfld.long 0x00 24.--26. "LOC,Level of Coherency" "Reserved,L1,L1/L2,?..."
newline
bitfld.long 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Reserved,Level 1,?..."
bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..."
bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "No cache,Reserved,Reserved,Reserved,Unified,?..."
newline
bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate Inst/Data,?..."
endif
rgroup.long c15:0x1700++0x0
line.long 0x00 "AIDR,Auxiliary ID Register"
rgroup.long c15:0x1000++0x0
line.long 0x0 "CCSIDR,Current Cache Size ID Register"
bitfld.long 0x00 31. "WT,Write-Through" "Not Supported,Supported"
bitfld.long 0x00 30. "WB,Write-Back" "Not Supported,Supported"
newline
bitfld.long 0x00 29. "RA,Read-Allocate" "Not Supported,Supported"
bitfld.long 0x00 28. "WA,Write-Allocate" "Not Supported,Supported"
newline
hexmask.long.word 0x00 13.--27. 1. "SETS,Number of Sets"
hexmask.long.word 0x00 3.--12. 1. "ASSOC,Associativity"
newline
bitfld.long 0x00 0.--2. "LSIZE,Line Size" "16 bytes,32 bytes,64 bytes,128 bytes,?..."
group.long c15:0x2000++0x0
line.long 0x0 "CSSELR,Cache Size Selection Register"
bitfld.long 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,?..."
bitfld.long 0x00 0. "IND,Instruction/Not Data" "Data/Unified,Instruction"
tree "Level 1 memory system"
if corename()=="CORTEXA57"
group.long c15:0x001F++0x00
line.long 0x00 "DL1DATA0,Data L1 Data 0 Register"
group.long c15:0x011F++0x00
line.long 0x00 "DL1DATA1,Data L1 Data 1 Register"
group.long c15:0x021F++0x00
line.long 0x00 "DL1DATA2,Data L1 Data 2 Register"
group.long c15:0x031F++0x00
line.long 0x00 "DL1DATA3,Data L1 Data 3 Register"
group.long c15:0x000F++0x00
line.long 0x00 "IL1DATA0,Instruction L1 Data 0 Register"
group.long c15:0x010F++0x00
line.long 0x00 "IL1DATA1,Instruction L1 Data 1 Register"
group.long c15:0x020F++0x00
line.long 0x00 "IL1DATA2,Instruction L1 Data 2 Register"
group.long c15:0x030F++0x00
line.long 0x00 "IL1DATA3,Instruction L1 Data 3 Register"
wgroup.long c15:0x04F++0x00
line.long 0x00 "RAMINDEX,RAM Index Operation Register"
elif corename()=="CORTEXA53"
rgroup.long c15:0x300F++0x00
line.long 0x00 "CDBGDR0,Cache Debug Data Register 0"
rgroup.long c15:0x310F++0x00
line.long 0x00 "CDBGDR1,Cache Debug Data Register 1"
rgroup.long c15:0x320F++0x00
line.long 0x00 "CDBGDR2,Cache Debug Data Register 2"
rgroup.long c15:0x330F++0x00
line.long 0x00 "CDBGDR3,Cache Debug Data Register 3"
wgroup.long c15:0x302F++0x00
line.long 0x00 "CDBGDCT,Cache Debug Data Cache Tag Read Operation Register"
wgroup.long c15:0x312F++0x00
line.long 0x00 "CDBGICT,Cache Debug Instruction Cache Tag Read Operation Register"
wgroup.long c15:0x304F++0x00
line.long 0x00 "CDBGDCD,Cache Debug Cache Debug Data Cache Data Read Operation Register"
wgroup.long c15:0x314F++0x00
line.long 0x00 "CDBGICD,Cache Debug Instruction Cache Data Read Operation Register"
wgroup.long c15:0x324F++0x00
line.long 0x00 "CDBGTD,Cache Debug TLB Data Read Operation Register"
endif
tree.end
tree "Level 2 memory system"
if corename()=="CORTEXA57"
group.long c15:0x1209++0x0
line.long 0x00 "L2CTLR,L2 Control Register"
bitfld.long 0x00 31. "L2RSTDM,L2RSTDISABLE monitor" "No,Yes"
bitfld.long 0x00 24.--25. "NCPU, Number of CPU" "1,2,3,4"
newline
rbitfld.long 0x00 22. "CPUCP,CPU Cache Protection" "Not supported,Supported"
bitfld.long 0x00 21. "SCUL2CP,SCU-L2 Cache Protection" "Disabled,Enabled"
newline
bitfld.long 0x00 20. "DIECCE,Data in-line ECC enable" "Disabled,Enabled"
rbitfld.long 0x00 13. "L2AS,L2 arbitration slice" "Not present,Present"
newline
rbitfld.long 0x00 12. "L2TRAMS,L2 Tag RAM slice" "Not present,Present"
rbitfld.long 0x00 10.--11. "L2DRAMS,L2 Data RAM slice" "Not present,1,2,Present"
newline
bitfld.long 0x00 9. "L2TRAMS,L2 Tag RAM setup" "0 cycle,1 cycle"
bitfld.long 0x00 6.--8. "L2TRAML,L2 Tag RAM latency" "2 cycles,2 cycles,3 cycles,4 cycles,5 cycles,5 cycles,5 cycles,5 cycles"
newline
rbitfld.long 0x00 5. "DRAMIL,L2 data RAM input latency" "0 cycle,1 cycle"
bitfld.long 0x00 0.--2. "DRAML,L2 data RAM latency" "2 cycles,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,7 cycles,8 cycles"
group.long c15:0x1309++0x0
line.long 0x00 "L2ECTLR,L2 Extended Control Register"
bitfld.long 0x00 30. "L2INTASYNCERR,L2 internal asynchronous error" "No error,Error"
bitfld.long 0x00 29. "AXIASYNCERR,AXI asynchronous error" "No error,Error"
newline
bitfld.long 0x00 0.--2. "L2DRC,L2 dynamic retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.long c15:0x100F++0x00
line.long 0x00 "L2ACTLR,L2 Auxiliary Control Register"
bitfld.long 0x00 28. "FL2TBCEA,Force L2 tag bank clock enable active" "Disabled,Enabled"
bitfld.long 0x00 27. "FL2LCEA,Force L2 logic clock enable active" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "FL2GICRCGEA,Forces L2, GIC CPU interface, and Timer Regional Clock Gate(RCG) enables active" "Not forced,Forced"
bitfld.long 0x00 25. "ESIAA,Enables single issue across all tag banks when the L2 arbitration replay threshold is reached" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "DPRFRUT,Disables prefetch requests from ReadUnique transactions" "No,Yes"
bitfld.long 0x00 22. "DDTLSPR,Disable dynamic throttling of load/store prefetch requests" "No,Yes"
newline
bitfld.long 0x00 20.--21. "DTL2PRFEQOC,Disable throttling of L2 prefetch requests based on Fill/Evict Queue(FEQ) occupancy count" "12,10,8,Disabled"
bitfld.long 0x00 18.--19. "DLASQ,Disable limit on NC/SO/Dev stores in Address Sequence Queue" "12 entries,10 entries,8 entries,No limit"
newline
bitfld.long 0x00 17. "DL2RRA,Disable L2 round-robin arbitration that only clocks through paths with an active requestor waiting to be arbitrated" "No,Yes"
bitfld.long 0x00 16. "ERTSI,Enable replay threshold single issue" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DFFD,Disable fast forwarding of data from ACE or CHI to LS and IF" "No,Yes"
bitfld.long 0x00 14. "EUCE,Enables UniqueClean evictions with data" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "DCEO,Disable clean evict optimization" "No,Yes"
bitfld.long 0x00 11. "DDSB,Disable DSB with no DVM synchronization" "No,Yes"
newline
bitfld.long 0x00 10. "DNSDAR,Disable Non-secure debug array read" "No,Yes"
bitfld.long 0x00 8. "DDVMCMOMB,Disable DVM and cache maintenance operation message broadcast" "No,Yes"
newline
bitfld.long 0x00 7. "EHDT,Enable hazard detect timeout" "Disabled,Enabled"
bitfld.long 0x00 6. "DACESCHIST,Disable ACE shareable or CHI snoopable transactions from master" "No,Yes"
newline
bitfld.long 0x00 4. "DWUWLUTFM,Disable WriteUnique and WriteLineUnique transactions from master" "Disabled,Enabled"
bitfld.long 0x00 3. "DCEPTE,Disables clean/evict push to external" "No,Yes"
newline
bitfld.long 0x00 2. "LTORPTB,Limit to one request per tag bank" "Normal,Limited"
bitfld.long 0x00 1. "EARTT,Enable arbitration replay threshold timeout" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DHPF,Disable hardware prefetch forwarding" "No,Yes"
group.quad c15:0x130F0++0x01
line.quad 0x00 "L2MERRSR,L2 Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
newline
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
newline
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--21. "C/W,CPUID/Way" "CPU0 tag way 0,CPU0 tag way 1,CPU1 tag way 0,CPU1 tag way 1,CPU2 tag way 0,CPU2 tag way 1,CPU3 tag way 0,CPU3 tag way 1,?..."
newline
hexmask.quad.tbyte 0x00 0.--17. 1. "IND,Index"
elif corename()=="CORTEXA53"
group.long c15:0x1209++0x0
line.long 0x00 "L2CTLR,L2 Control Register"
bitfld.long 0x00 24.--25. "NCPU, Number of CPU" "1,2,3,4"
bitfld.long 0x00 22. "CPUCP,CPU Cache Protection" "Disabled,Enabled"
newline
rbitfld.long 0x00 21. "SCUL2CP,SCU-L2 Cache Protection" "Disabled,Enabled"
rbitfld.long 0x00 5. "DRAMIL,L2 data RAM input latency" "1 cycle,2 cycle"
newline
rbitfld.long 0x00 0. "DRAMOL,L2 data RAM output latency" "2 cycles,3 cycles"
group.long c15:0x1309++0x0
line.long 0x00 "L2ECTLR,L2 Extended Control Register"
bitfld.long 0x00 30. "L2INTASYNCERR,L2 internal asynchronous error" "No error,Error"
bitfld.long 0x00 29. "AXIASYNCERR,AXI asynchronous error" "No error,Error"
newline
bitfld.long 0x00 0.--2. "L2DRC,L2 dynamic retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.long c15:0x100F++0x00
line.long 0x00 "L2ACTLR,L2 Auxiliary Control Register"
bitfld.long 0x00 30.--31. "L2VC,L2 victim Control" "0,1,2,3"
bitfld.long 0x00 14. "EUCE,Enables UniqueClean evictions with data" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DCEPTE,Disables clean/evict push to external" "No,Yes"
group.quad c15:0x110F0++0x01
line.quad 0x00 "L2MERRSR,L2 Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
newline
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
newline
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--21. "C/W,CPUID/Way" "CPU0 tag way 0,CPU0 tag way 1,CPU1 tag way 0,CPU1 tag way 1,CPU2 tag way 0,CPU2 tag way 1,CPU3 tag way 0,CPU3 tag way 1,?..."
newline
hexmask.quad.word 0x00 3.--16. 1. "RAD,RAM index address"
endif
tree.end
tree.end
tree "System Performance Monitor"
group.long c15:0xc9++0x00
line.long 0x0 "PMCR,Performance Monitor Control Register"
hexmask.long.byte 0x00 24.--31. 1. "IMP,Implementer code"
hexmask.long.byte 0x00 16.--23. 1. "IDCODE,Identification code"
rbitfld.long 0x00 11.--15. "N,Number of counters implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6. "LC,Long cycle count enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "DP,Disable CCNT when prohibited" "No,Yes"
bitfld.long 0x00 4. "X,Export Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "D,Clock Divider" "Every cycle,64th cycle"
bitfld.long 0x00 2. "C,Clock Counter Reset" "No reset,Reset"
newline
bitfld.long 0x00 1. "P,Performance Counter Reset" "No reset,Reset"
bitfld.long 0x00 0. "E,All Counters Enable" "Disabled,Enabled"
newline
group.long c15:0x1c9++0x00
line.long 0x00 "PMNCNTENSET,Count Enable Set Register "
bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
bitfld.long 0x00 30. "P30,Event Counter 30 enable bit" "Disabled,Enabled"
bitfld.long 0x00 29. "P29,Event Counter 29 enable bit" "Disabled,Enabled"
bitfld.long 0x00 28. "P28,Event Counter 28 enable bit" "Disabled,Enabled"
bitfld.long 0x00 27. "P27,Event Counter 27 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "P26,Event Counter 26 enable bit" "Disabled,Enabled"
bitfld.long 0x00 25. "P25,Event Counter 25 enable bit" "Disabled,Enabled"
bitfld.long 0x00 24. "P24,Event Counter 24 enable bit" "Disabled,Enabled"
bitfld.long 0x00 23. "P23,Event Counter 23 enable bit" "Disabled,Enabled"
bitfld.long 0x00 22. "P22,Event Counter 22 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "P21,Event Counter 21 enable bit" "Disabled,Enabled"
bitfld.long 0x00 20. "P20,Event Counter 20 enable bit" "Disabled,Enabled"
bitfld.long 0x00 19. "P19,Event Counter 19 enable bit" "Disabled,Enabled"
bitfld.long 0x00 18. "P18,Event Counter 18 enable bit" "Disabled,Enabled"
bitfld.long 0x00 17. "P17,Event Counter 17 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "P16,Event Counter 16 enable bit" "Disabled,Enabled"
bitfld.long 0x00 15. "P15,Event Counter 15 enable bit" "Disabled,Enabled"
bitfld.long 0x00 14. "P14,Event Counter 14 enable bit" "Disabled,Enabled"
bitfld.long 0x00 13. "P13,Event Counter 13 enable bit" "Disabled,Enabled"
bitfld.long 0x00 12. "P12,Event Counter 12 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "P11,Event Counter 11 enable bit" "Disabled,Enabled"
bitfld.long 0x00 10. "P10,Event Counter 10 enable bit" "Disabled,Enabled"
bitfld.long 0x00 9. "P9,Event Counter 9 enable bit" "Disabled,Enabled"
bitfld.long 0x00 8. "P8,Event Counter 8 enable bit" "Disabled,Enabled"
bitfld.long 0x00 7. "P7,Event Counter 7 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00 6. "P6,Event Counter 6 enable bit" "Disabled,Enabled"
bitfld.long 0x00 5. "P5,Event Counter 5 enable bit" "Disabled,Enabled"
bitfld.long 0x00 4. "P4,Event Counter 4 enable bit" "Disabled,Enabled"
bitfld.long 0x00 3. "P3,Event Counter 3 enable bit" "Disabled,Enabled"
bitfld.long 0x00 2. "P2,Event Counter 2 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "P1,Event Counter 1 enable bit" "Disabled,Enabled"
bitfld.long 0x00 0. "P0,Event Counter 0 enable bit" "Disabled,Enabled"
group.long c15:0x2c9++0x00
line.long 0x00 "PMCNTENCLR,Count Enable Clear Register"
eventfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
eventfld.long 0x00 30. "P30,Event Counter 30 clear bit" "Disabled,Enabled"
eventfld.long 0x00 29. "P29,Event Counter 29 clear bit " "Disabled,Enabled"
eventfld.long 0x00 28. "P28,Event Counter 28 clear bit " "Disabled,Enabled"
eventfld.long 0x00 27. "P27,Event Counter 27 clear bit " "Disabled,Enabled"
newline
eventfld.long 0x00 26. "P26,Event Counter 26 clear bit " "Disabled,Enabled"
eventfld.long 0x00 25. "P25,Event Counter 25 clear bit " "Disabled,Enabled"
eventfld.long 0x00 24. "P24,Event Counter 24 clear bit " "Disabled,Enabled"
eventfld.long 0x00 23. "P23,Event Counter 23 clear bit " "Disabled,Enabled"
eventfld.long 0x00 22. "P22,Event Counter 22 clear bit " "Disabled,Enabled"
newline
eventfld.long 0x00 21. "P21,Event Counter 21 clear bit " "Disabled,Enabled"
eventfld.long 0x00 20. "P20,Event Counter 20 clear bit " "Disabled,Enabled"
eventfld.long 0x00 19. "P19,Event Counter 19 clear bit " "Disabled,Enabled"
eventfld.long 0x00 18. "P18,Event Counter 18 clear bit " "Disabled,Enabled"
eventfld.long 0x00 17. "P17,Event Counter 17 clear bit " "Disabled,Enabled"
newline
eventfld.long 0x00 16. "P16,Event Counter 16 clear bit " "Disabled,Enabled"
eventfld.long 0x00 15. "P15,Event Counter 15 clear bit" "Disabled,Enabled"
eventfld.long 0x00 14. "P14,Event Counter 14 clear bit" "Disabled,Enabled"
eventfld.long 0x00 13. "P13,Event Counter 13 clear bit" "Disabled,Enabled"
eventfld.long 0x00 12. "P12,Event Counter 12 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00 11. "P11,Event Counter 11 clear bit" "Disabled,Enabled"
eventfld.long 0x00 10. "P10,Event Counter 10 clear bit" "Disabled,Enabled"
eventfld.long 0x00 9. "P9,Event Counter 9 clear bit" "Disabled,Enabled"
eventfld.long 0x00 8. "P8,Event Counter 8 clear bit" "Disabled,Enabled"
eventfld.long 0x00 7. "P7,Event Counter 7 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00 6. "P6,Event Counter 6 clear bit" "Disabled,Enabled"
eventfld.long 0x00 5. "P5,Event Counter 5 clear bit" "Disabled,Enabled"
eventfld.long 0x00 4. "P4,Event Counter 4 clear bit" "Disabled,Enabled"
eventfld.long 0x00 3. "P3,Event Counter 3 clear bit" "Disabled,Enabled"
eventfld.long 0x00 2. "P2,Event Counter 2 clear bit" "Disabled,Enabled"
newline
eventfld.long 0x00 1. "P1,Event Counter 1 clear bit" "Disabled,Enabled"
eventfld.long 0x00 0. "P0,Event Counter 0 clear bit" "Disabled,Enabled"
group.long c15:0x3c9++0x00
line.long 0x00 "PMOVSR,Performance Monitor Overflow Status Register"
eventfld.long 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow"
eventfld.long 0x00 30. "P30,PMN30 overflow" "No overflow,Overflow"
eventfld.long 0x00 29. "P29,PMN29 overflow" "No overflow,Overflow"
eventfld.long 0x00 28. "P28,PMN28 overflow" "No overflow,Overflow"
eventfld.long 0x00 27. "P27,PMN27 overflow" "No overflow,Overflow"
newline
eventfld.long 0x00 26. "P26,PMN26 overflow" "No overflow,Overflow"
eventfld.long 0x00 25. "P25,PMN25 overflow" "No overflow,Overflow"
eventfld.long 0x00 24. "P24,PMN24 overflow" "No overflow,Overflow"
eventfld.long 0x00 23. "P23,PMN23 overflow" "No overflow,Overflow"
eventfld.long 0x00 22. "P22,PMN22 overflow" "No overflow,Overflow"
newline
eventfld.long 0x00 21. "P21,PMN21 overflow" "No overflow,Overflow"
eventfld.long 0x00 20. "P20,PMN20 overflow" "No overflow,Overflow"
eventfld.long 0x00 19. "P19,PMN19 overflow" "No overflow,Overflow"
eventfld.long 0x00 18. "P18,PMN18 overflow" "No overflow,Overflow"
eventfld.long 0x00 17. "P17,PMN17 overflow" "No overflow,Overflow"
newline
eventfld.long 0x00 16. "P16,PMN16 overflow" "No overflow,Overflow"
eventfld.long 0x00 15. "P15,PMN15 overflow" "No overflow,Overflow"
eventfld.long 0x00 14. "P14,PMN14 overflow" "No overflow,Overflow"
eventfld.long 0x00 13. "P13,PMN13 overflow" "No overflow,Overflow"
eventfld.long 0x00 12. "P12,PMN12 overflow" "No overflow,Overflow"
newline
eventfld.long 0x00 11. "P11,PMN11 overflow" "No overflow,Overflow"
eventfld.long 0x00 10. "P10,PMN10 overflow" "No overflow,Overflow"
eventfld.long 0x00 9. "P9,PMN9 overflow" "No overflow,Overflow"
eventfld.long 0x00 8. "P8,PMN8 overflow" "No overflow,Overflow"
eventfld.long 0x00 7. "P7,PMN7 overflow" "No overflow,Overflow"
newline
eventfld.long 0x00 6. "P6,PMN6 overflow" "No overflow,Overflow"
eventfld.long 0x00 5. "P5,PMN5 overflow" "No overflow,Overflow"
eventfld.long 0x00 4. "P4,PMN4 overflow" "No overflow,Overflow"
eventfld.long 0x00 3. "P3,PMN3 overflow" "No overflow,Overflow"
eventfld.long 0x00 2. "P2,PMN2 overflow" "No overflow,Overflow"
newline
eventfld.long 0x00 1. "P1,PMN1 overflow" "No overflow,Overflow"
eventfld.long 0x00 0. "P0,PMN0 overflow" "No overflow,Overflow"
group.long c15:0x4c9++0x00
line.long 0x00 "PMSWINC,Performance Monitor Software Increment"
bitfld.long 0x00 30. "P30,Increment PMN30" "No action,Increment"
bitfld.long 0x00 29. "P29,Increment PMN29" "No action,Increment"
bitfld.long 0x00 28. "P28,Increment PMN28" "No action,Increment"
bitfld.long 0x00 27. "P27,Increment PMN27" "No action,Increment"
bitfld.long 0x00 26. "P26,Increment PMN26" "No action,Increment"
newline
bitfld.long 0x00 25. "P25,Increment PMN25" "No action,Increment"
bitfld.long 0x00 24. "P24,Increment PMN24" "No action,Increment"
bitfld.long 0x00 23. "P23,Increment PMN23" "No action,Increment"
bitfld.long 0x00 22. "P22,Increment PMN22" "No action,Increment"
bitfld.long 0x00 21. "P21,Increment PMN21" "No action,Increment"
newline
bitfld.long 0x00 20. "P20,Increment PMN20" "No action,Increment"
bitfld.long 0x00 19. "P19,Increment PMN19" "No action,Increment"
bitfld.long 0x00 18. "P18,Increment PMN18" "No action,Increment"
bitfld.long 0x00 17. "P17,Increment PMN17" "No action,Increment"
bitfld.long 0x00 16. "P16,Increment PMN16" "No action,Increment"
newline
bitfld.long 0x00 15. "P15,Increment PMN15" "No action,Increment"
bitfld.long 0x00 14. "P14,Increment PMN14" "No action,Increment"
bitfld.long 0x00 13. "P13,Increment PMN13" "No action,Increment"
bitfld.long 0x00 12. "P12,Increment PMN12" "No action,Increment"
bitfld.long 0x00 11. "P11,Increment PMN11" "No action,Increment"
newline
bitfld.long 0x00 10. "P10,Increment PMN10" "No action,Increment"
bitfld.long 0x00 9. "P9,Increment PMN9" "No action,Increment"
bitfld.long 0x00 8. "P8,Increment PMN8" "No action,Increment"
bitfld.long 0x00 7. "P7,Increment PMN7" "No action,Increment"
bitfld.long 0x00 6. "P6,Increment PMN6" "No action,Increment"
newline
bitfld.long 0x00 5. "P5,Increment PMN5" "No action,Increment"
bitfld.long 0x00 4. "P4,Increment PMN4" "No action,Increment"
bitfld.long 0x00 3. "P3,Increment PMN3" "No action,Increment"
bitfld.long 0x00 2. "P2,Increment PMN2" "No action,Increment"
bitfld.long 0x00 1. "P1,Increment PMN1" "No action,Increment"
newline
bitfld.long 0x00 0. "P0,Increment PMN0" "No action,Increment"
group.long c15:0x5c9++0x00
line.long 0x00 "PMSELR,Performance Monitor Select Register"
bitfld.long 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,?..."
group.long c15:0xd9++0x00
line.long 0x00 "PMCCNTR,Performance Monitor Cycle Count Register"
group.long c15:0x1d9++0x00
line.long 0x00 "PMXEVTYPER,Performance Monitor Event Type Register"
group.long c15:0x2d9++0x00
line.long 0x00 "PMXEVCNTR,Performance Monitor Event Count Register"
group.long c15:0xe9++0x00
line.long 0x00 "PMUSERENR,Performance Monitor User Enable Register"
bitfld.long 0x00 3. "ER,Event counter read enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CR,Cycle counter read enable" "Disabled,Enabled"
bitfld.long 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled"
bitfld.long 0x00 0. "EN,User mode access enable" "Disabled,Enabled"
group.long c15:0x1e9++0x00
line.long 0x00 "PMINTENSET,Performance Monitor Interrupt Enable Set"
bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
bitfld.long 0x00 30. "P30,PMCNT30 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 29. "P29,PMCNT29 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 28. "P28,PMCNT28 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 27. "P27,PMCNT27 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "P26,PMCNT26 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 25. "P25,PMCNT25 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 24. "P24,PMCNT24 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 23. "P23,PMCNT23 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 22. "P22,PMCNT22 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "P21,PMCNT21 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 20. "P20,PMCNT20 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 19. "P19,PMCNT19 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 18. "P18,PMCNT18 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 17. "P17,PMCNT17 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "P16,PMCNT16 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 15. "P15,PMCNT15 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 14. "P14,PMCNT14 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 13. "P13,PMCNT13 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 12. "P12,PMCNT12 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "P11,PMCNT11 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 10. "P10,PMCNT10 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 9. "P9,PMCNT9 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 8. "P8,PMCNT8 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 7. "P7,PMCNT7 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 6. "P6,PMCNT6 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled"
group.long c15:0x2e9++0x00
line.long 0x00 "PMINTENCLR,Performance Monitor Interrupt Enable Clear"
eventfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
eventfld.long 0x00 30. "P30,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 29. "P29,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 28. "P28,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 27. "P27,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00 26. "P26,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 25. "P25,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 24. "P24,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 23. "P23,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 22. "P22,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00 21. "P21,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 20. "P20,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 19. "P19,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 18. "P18,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 17. "P17,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00 16. "P16,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 15. "P15,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 14. "P14,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 13. "P13,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 12. "P12,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00 11. "P11,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 10. "P10,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 9. "P9,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 8. "P8,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 7. "P7,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00 6. "P6,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 5. "P5,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 4. "P4,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 3. "P3,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 2. "P2,Overflow Interrupt Clear" "Disabled,Enabled"
newline
eventfld.long 0x00 1. "P1,Overflow Interrupt Clear" "Disabled,Enabled"
eventfld.long 0x00 0. "P0,Overflow Interrupt Clear" "Disabled,Enabled"
group.long c15:0x3e9++0x00
line.long 0x00 "PMOVSSET,Performance Monitor Overflow Flag Status Set Register"
group.long c15:0x8E++0x00
line.long 0x00 "PMEVCNTR0,Performance Monitors Event Count Register 0"
group.long c15:(0x8E+0x40)++0x00
line.long 0x00 "PMEVTYPER0,Performance Monitors Selected Event Type Register 0"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x18E++0x00
line.long 0x00 "PMEVCNTR1,Performance Monitors Event Count Register 1"
group.long c15:(0x18E+0x40)++0x00
line.long 0x00 "PMEVTYPER1,Performance Monitors Selected Event Type Register 1"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x28E++0x00
line.long 0x00 "PMEVCNTR2,Performance Monitors Event Count Register 2"
group.long c15:(0x28E+0x40)++0x00
line.long 0x00 "PMEVTYPER2,Performance Monitors Selected Event Type Register 2"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x38E++0x00
line.long 0x00 "PMEVCNTR3,Performance Monitors Event Count Register 3"
group.long c15:(0x38E+0x40)++0x00
line.long 0x00 "PMEVTYPER3,Performance Monitors Selected Event Type Register 3"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x48E++0x00
line.long 0x00 "PMEVCNTR4,Performance Monitors Event Count Register 4"
group.long c15:(0x48E+0x40)++0x00
line.long 0x00 "PMEVTYPER4,Performance Monitors Selected Event Type Register 4"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x58E++0x00
line.long 0x00 "PMEVCNTR5,Performance Monitors Event Count Register 5"
group.long c15:(0x58E+0x40)++0x00
line.long 0x00 "PMEVTYPER5,Performance Monitors Selected Event Type Register 5"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x07FE++0x00
line.long 0x00 "PMCCFILTR,Performance Monitors Cycle Count Filter Register"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
tree.end
tree "System Timer Registers"
group.long c15:0x000E++0x00
line.long 0x00 "CNTFRQ,Counter Frequency Register"
rgroup.quad c15:0x100E0++0x01
line.quad 0x00 "CNTPCT,Counter Physical Count Register"
group.long c15:0x001E++0x00
line.long 0x00 "CNTKCTL,Timer PL1 Control Register"
bitfld.long 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from the virtual counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
newline
bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
bitfld.long 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
group.long c15:0x002E++0x00
line.long 0x00 "CNTP_TVAL,Counter PL1 Physical Compare Value Register"
group.long c15:0x012E++0x00
line.long 0x00 "CNTP_CTL,Counter PL1 Physical Timer Control Register"
rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.long c15:0x003E++0x00
line.long 0x00 "CNTV_TVAL,Counter PL1 Virtual Timer Value Register"
group.long c15:0x013E++0x00
line.long 0x00 "CNTV_CTL,Counter PL1 Virtual Timer Control Register"
rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad c15:0x110E0++0x01
line.quad 0x00 "CNTVCT,Counter Virtual Count Register"
group.quad c15:0x120E0++0x01
line.quad 0x00 "CNTP_CVAL,Counter PL1 Physical Compare Value Register"
group.quad c15:0x130E0++0x01
line.quad 0x00 "CNTV_CVAL,Counter PL1 Virtual Compare Value Register"
group.quad c15:0x140E0++0x01
line.quad 0x00 "CNTVOFF,Counter Virtual Offset Register"
group.long c15:0x401E++0x00
line.long 0x00 "CNTHCTL,Counter Non-secure PL2 Control Register"
bitfld.long 0x00 4.--7. "EVNTI,Select trigger for the event stream generated from counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "EL1VCTEN,Controls whether the Non-secure copies of the physical timer registers are accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 0. "EL1PCTEN,Controls whether the physical counter, CNTPCT, is accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible"
group.long c15:0x402E++0x00
line.long 0x00 "CNTHP_TVAL,Counter Non-secure PL2 Physical Timer Value Register"
group.long c15:0x412E++0x00
line.long 0x00 "CNTHP_CTL,Counter Non-secure PL2 Physical Timer Control Register"
rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad c15:0x160E0++0x01
line.quad 0x00 "CNTHP_CVAL,Counter Non-secure PL2 Physical Compare Value Register"
tree.end
tree "Generic Interrupt Controller CPU Interface"
tree "AArch32 GIC Physical CPU Interface System Registers"
tree.open "Interrupt Controller Active Priorities Registers"
group.long c15:0x048C++0x00
line.long 0x00 "ICC_AP0R0,Active Priorities Group 0 Register 0"
bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
group.long c15:0x009C++0x00
line.long 0x00 "ICC_AP1R0,Active Priorities Group 1 Register 0"
bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
tree.end
newline
wgroup.quad c15:0x110C0++0x01
line.quad 0x00 "ICC_ASGI1R,Alternate SGI Generation Register 1"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "SGIID,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
group.long c15:0x038C++0x00
line.long 0x00 "ICC_BPR0,Binary Point Register 0"
bitfld.long 0x00 0.--2. "BINARYPOINT,Binary point" "0,1,2,3,4,5,6,7"
group.long c15:0x03CC++0x00
line.long 0x00 "ICC_BPR1,Binary Point Register 1"
bitfld.long 0x00 0.--2. "BINARYPOINT,Binary point" "0,1,2,3,4,5,6,7"
group.long c15:0x04CC++0x00
line.long 0x00 "ICC_CTLR,Interrupt Control Registers for EL1"
rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported"
rbitfld.long 0x00 14. "SEIS,SEI Support" "Not supported,Supported"
rbitfld.long 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
newline
rbitfld.long 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled"
bitfld.long 0x00 1. "EOIMODE,Alias of ICC_MCTLR.EOImode_EL1" "0,1"
newline
bitfld.long 0x00 0. "CBPR,Common Binary Point Register" "0,1"
group.long c15:0x64CC++0x00
line.long 0x00 "ICC_MCTLR,Interrupt Control Registers for EL3"
rbitfld.long 0x00 17. "NDS,Disable Security not supported" "Supported,Not supported"
rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported"
rbitfld.long 0x00 14. "SEIS,Indicates whether the CPU interface supports generation of SEIs" "Not supported,Supported"
newline
rbitfld.long 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
rbitfld.long 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "EOIMODE_EL1NS,Controls whether a write to an End of Interrupt register also deactivates the interrupt(Non-secure EL1 and EL2)" "Enabled,Disabled"
bitfld.long 0x00 3. "EOIMODE_EL1S,Controls whether a write to an End of Interrupt register also deactivates the interrupt(Secure EL1)" "Enabled,Disabled"
bitfld.long 0x00 2. "EOIMODE_EL3,Controls whether a write to an End of Interrupt register also deactivates the interrupt(EL3)" "Enabled,Disabled"
newline
bitfld.long 0x00 1. "CBPR_EL1NS,Controls whether the same register is used for interrupt preemption of both Group 0 and Group 1 Non-secure interrupts at EL1" "Separate registers,Same register"
bitfld.long 0x00 0. "CBPR_EL1S,Controls whether the same register is used for interrupt preemption of both Group 0 and Group 1 Secure interrupts in Secure non-Monitor modes" "Separate registers,Same register"
if (((per.l(c15:0x4CC))&0x3800)==0x00)
wgroup.long c15:0x01BC++0x00
line.long 0x00 "ICC_DIR,Interrupt Controller Deactivate Interrupt Register"
hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the interrupt to be deactivated"
wgroup.long c15:0x018C++0x00
line.long 0x00 "ICC_EOIR0,Interrupt Controller End Of Interrupt Register 0"
hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR0 access"
wgroup.long c15:0x01CC++0x00
line.long 0x00 "ICC_EOIR1,Interrupt Controller End Of Interrupt Register 1"
hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR1 access"
rgroup.long c15:0x028C++0x00
line.long 0x00 "ICC_HPPIR0,Interrupt Controller Highest Priority Pending Interrupt Register 0"
hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the current security state and exception level"
rgroup.long c15:0x02CC++0x00
line.long 0x00 "ICC_HPPIR1,Interrupt Controller Highest Priority Pending Interrupt Register 1"
hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the current security state and exception level"
elif (((per.l(c15:0x4CC))&0x3800)==0x800)
wgroup.long c15:0x01BC++0x00
line.long 0x00 "ICC_DIR,Interrupt Controller Deactivate Interrupt Register"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the interrupt to be deactivated"
wgroup.long c15:0x018C++0x00
line.long 0x00 "ICC_EOIR0,Interrupt Controller End Of Interrupt Register 0"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR0 access"
wgroup.long c15:0x01CC++0x00
line.long 0x00 "ICC_EOIR1,Interrupt Controller End Of Interrupt Register 1"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR1 access"
rgroup.long c15:0x028C++0x00
line.long 0x00 "ICC_HPPIR0,Interrupt Controller Highest Priority Pending Interrupt Register 0"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the current security state and exception level"
rgroup.long c15:0x02CC++0x00
line.long 0x00 "ICC_HPPIR1,Interrupt Controller Highest Priority Pending Interrupt Register 1"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the current security state and exception level"
endif
hgroup.long c15:0x008C++0x00
hide.long 0x00 "ICC_IAR0,Interrupt Acknowledge Register 0"
in
hgroup.long c15:0x00CC++0x00
hide.long 0x00 "ICC_IAR1,Interrupt Acknowledge Register 1"
in
group.long c15:0x06CC++0x00
line.long 0x00 "ICC_IGRPEN0,Interrupt Group Enable Register 0"
bitfld.long 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled"
group.long c15:0x07CC++0x00
line.long 0x00 "ICC_IGRPEN1,Interrupt Group Enable Register 1"
bitfld.long 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled"
group.long c15:0x0064++0x00
line.long 0x00 "ICC_PMR,Priority Mask Register"
hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Priority mask level for the CPU interface"
rgroup.long c15:0x03BC++0x00
line.long 0x00 "ICC_RPR,Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface"
wgroup.quad c15:0x120C0++0x01
line.quad 0x00 "ICC_SGI0R,SGI Generation Register 0"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
wgroup.quad c15:0x100C0++0x01
line.quad 0x00 "ICC_SGI1R,SGI Generation Register 1"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
group.long c15:0x05CC++0x00
line.long 0x00 "ICC_SRE,System Register Enable Register for EL1"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
if corename()=="CORTEXA53"
group.long c15:0x459C++0x00
line.long 0x00 "ICC_HSRE,System Register Enable Register for EL2"
bitfld.long 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1" "Disabled,Enabled"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
newline
bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
endif
group.long c15:0x65CC++0x00
line.long 0x00 "ICC_MSRE,System Register Enable Register for EL3"
bitfld.long 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1 and ICC_SRE_EL2" "Disabled,Enabled"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
newline
bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
group.long c15:0x67CC++0x00
line.long 0x00 "ICC_MGRPEN1,Monitor Group1 Interrupt Group Enable"
bitfld.long 0x00 1. "ENABLEGRP1S,Enables Group 1 interrupts for the Secure state" "Disabled,Enabled"
bitfld.long 0x00 0. "ENABLEGRP1NS,Enables Group 1 interrupts for the Non-secure state" "Disabled,Enabled"
tree.end
tree "AArch32 Virtual Interface Control System Registers"
tree.open "Hypervisor Active Priorities Registers"
group.long c15:0x408C++0x00
line.long 0x00 "ICH_AP0R0,Interrupt Controller Hypervisor Active Priorities Group 0 Register 0"
bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
group.long c15:0x409C++0x00
line.long 0x00 "ICH_AP1R0,Interrupt Controller Hypervisor Active Priorities Group 1 Register 0"
bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
tree.end
newline
rgroup.long c15:0x43BC++0x00
line.long 0x00 "ICH_EISR,Interrupt Controller End of Interrupt Status Register"
bitfld.long 0x00 3. "STATUS3,EOI maintenance interrupt status bit for List register 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "STATUS2,EOI maintenance interrupt status bit for List register 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "STATUS1,EOI maintenance interrupt status bit for List register 1" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. "STATUS0,EOI maintenance interrupt status bit for List register 0" "No interrupt,Interrupt"
rgroup.long c15:0x45BC++0x00
line.long 0x00 "ICH_ELRSR,Interrupt Controller Empty List Register Status Register"
bitfld.long 0x00 3. "STATUS3,Status bit for List register 3" "Interrupt,No interrupt"
bitfld.long 0x00 2. "STATUS2,Status bit for List register 2" "Interrupt,No interrupt"
bitfld.long 0x00 1. "STATUS1,Status bit for List register 1" "Interrupt,No interrupt"
newline
bitfld.long 0x00 0. "STATUS0,Status bit for List register 0" "Interrupt,No interrupt"
group.long c15:0x40BC++0x00
line.long 0x00 "ICH_HCR,Interrupt Controller Hypervisor Control Register"
bitfld.long 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR" "Not trapped,Trapped"
bitfld.long 0x00 13. "TSEI,Trap all locally generated SEIs" "Not trapped,Trapped"
newline
bitfld.long 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped"
bitfld.long 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped"
bitfld.long 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped"
newline
bitfld.long 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled"
group.long c15:(0x40CC+0x0)++0x00
line.long 0x00 "ICH_LR0,Interrupt Controller List Register 0"
hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x100)++0x00
line.long 0x00 "ICH_LR1,Interrupt Controller List Register 1"
hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x200)++0x00
line.long 0x00 "ICH_LR2,Interrupt Controller List Register 2"
hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x300)++0x00
line.long 0x00 "ICH_LR3,Interrupt Controller List Register 3"
hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
group.long c15:(0x40EC+0x0)++0x00
line.long 0x00 "ICH_LRC0,Interrupt Controller List Register Extension 0"
bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt"
bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0"
newline
hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
group.long c15:(0x40EC+0x100)++0x00
line.long 0x00 "ICH_LRC1,Interrupt Controller List Register Extension 1"
bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt"
bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0"
newline
hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
group.long c15:(0x40EC+0x200)++0x00
line.long 0x00 "ICH_LRC2,Interrupt Controller List Register Extension 2"
bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt"
bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0"
newline
hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
group.long c15:(0x40EC+0x300)++0x00
line.long 0x00 "ICH_LRC3,Interrupt Controller List Register Extension 3"
bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt"
bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0"
newline
hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
rgroup.long c15:0x42BC++0x00
line.long 0x00 "ICH_MISR,Interrupt Controller Maintenance Interrupt State Register"
bitfld.long 0x00 7. "VGRP1D,VPE Group 1 Disabled" "Not asserted,Asserted"
bitfld.long 0x00 6. "VGRP1E,VPE Group 1 Enabled" "Not asserted,Asserted"
bitfld.long 0x00 5. "VGRP0D,VPE Group 0 Disabled" "Not asserted,Asserted"
newline
bitfld.long 0x00 4. "VGRP0E,VPE Group 0 Enabled" "Not asserted,Asserted"
bitfld.long 0x00 3. "NP,No Pending" "Not asserted,Asserted"
bitfld.long 0x00 2. "LRENP,List Register Entry Not Present" "Not asserted,Asserted"
newline
bitfld.long 0x00 1. "U,Underflow" "Not asserted,Asserted"
bitfld.long 0x00 0. "EOI,End Of Interrupt" "Not asserted,Asserted"
group.long c15:0x459C++0x00
line.long 0x00 "ICH_SRE,Hypervisor System Register"
group.long c15:0x47BC++0x00
line.long 0x00 "ICH_VMCR,Interrupt Controller Virtual Machine Control Register"
hexmask.long.byte 0x00 24.--31. 1. "VPMR,The priority mask level for the virtual CPU interface"
bitfld.long 0x00 21.--23. "VBPR0,Virtual Binary Point Register Group 0" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]"
bitfld.long 0x00 18.--20. "VBPR1,Virtual Binary Point Register, Group 1" ",[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]"
newline
bitfld.long 0x00 9. "VEOIM,Controls whether a write to an End of Interrupt register also deactivates the virtual interrupt" "Disabled,Enabled"
bitfld.long 0x00 4. "VCBPR,Virtual Common Binary Point Register" "Separate registers,Same register"
bitfld.long 0x00 3. "VFIQEN,Virtual FIQ enable" "Virtual IRQs,Virtual FIQs"
newline
bitfld.long 0x00 2. "VACKCTL,Virtual FIQ enable" "1022,Corresponding interrupt"
bitfld.long 0x00 1. "VENG1,Virtual Group 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "VENG0,Virtual Group 0 interrupt enable" "Disabled,Enabled"
group.long c15:0x449C++0x00
line.long 0x00 "ICH_VSEIR,Virtual System Error Interrupt Register"
rgroup.long c15:0x41BC++0x00
line.long 0x00 "ICH_VTR,Interrupt Controller VGIC Type Register"
bitfld.long 0x00 29.--31. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 26.--28. "PREBITS,The number of virtual preemption bits implemented, minus one" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 23.--25. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
newline
bitfld.long 0x00 22. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,Supported"
bitfld.long 0x00 21. "A3V,Affinity 3 Valid" "Only zero values supported,Non-zero values supported"
bitfld.long 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Supported,Not supported"
newline
bitfld.long 0x00 19. "TDS,Separate trapping of Non-secure EL1 writes to ICV_DIR_EL1 supported" "Not supported,Supported"
bitfld.long 0x00 0.--4. "LISTREGS,The number of implemented List registers, minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
tree.end
tree.end
tree "Debug Registers"
tree "Coresight Management Registers"
if corename()=="CORTEXA57"
rgroup.long c14:0x0000++0x0
line.long 0x0 "DBGDIDR,Debug ID Register"
bitfld.long 0x0 28.--31. "WRP,Number of Watchpoint Register Pairs" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
bitfld.long 0x0 24.--27. "BRP,Number of Breakpoint Register Pairs" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
bitfld.long 0x0 20.--23. "CTX_CMP,Number of BRPs with Context ID Comparison Capability" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
newline
hexmask.long.byte 0x0 16.--19. 1. "VERSION,Debug Architecture Version"
bitfld.long 0x0 14. "NSUHD,Secure User halting debug-mode" "Supported,Not supported"
bitfld.long 0x0 12. "SE,Security Extensions implemented" "Not implemented,Implemented"
elif corename()=="CORTEXA53"
rgroup.long c14:0x0000++0x0
line.long 0x0 "DBGDIDR,Debug ID Register"
bitfld.long 0x0 28.--31. "WRP,Number of Watchpoint Register Pairs" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
bitfld.long 0x0 24.--27. "BRP,Number of Breakpoint Register Pairs" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
bitfld.long 0x0 20.--23. "CTX_CMP,Number of BRPs with Context ID Comparison Capability" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
newline
hexmask.long.byte 0x0 16.--19. 1. "VERSION,Debug Architecture Version"
bitfld.long 0x0 15. "DEVID,Debug Device ID" "Low,High"
bitfld.long 0x0 14. "NSUHD,Secure User halting debug-mode" "Supported,Not supported"
newline
bitfld.long 0x0 13. "PCSR,PC Sample register implemented" "Not implemented,Implemented"
bitfld.long 0x0 12. "SE,Security Extensions implemented" "Not implemented,Implemented"
hexmask.long.byte 0x0 4.--7. 1. "VARIANT,Implementation-defined Variant Number"
newline
hexmask.long.byte 0x0 0.--3. 1. "REVISION,Implementation-defined Revision Number"
endif
rgroup.long c14:0x0060++0x0
line.long 0x00 "DBGWFAR,Watchpoint Fault Address Register"
group.long c14:0x0070++0x0
line.long 0x00 "DBGVCR,Debug Vector Catch register"
bitfld.long 0x00 31. "FIQVCE_NS,FIQ vector catch in Non-secure state" "Disabled,Enabled"
bitfld.long 0x00 30. "IRQVCE_NS,IRG vector catch in Non-secure state" "Disabled,Enabled"
bitfld.long 0x00 28. "DAVCE_NS,Data Abort vector catch in Non-secure state" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "PAVCE_NS,Prefetch Abort vector catch in Non-secure state" "Disabled,Enabled"
bitfld.long 0x00 26. "SVCVCE_NS,SVC vector catch in Non-secure state" "Disabled,Enabled"
bitfld.long 0x00 25. "UIVCE_NS,Undefined instruction vector catch in Non-secure state" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "FIQVCE_SM,FIQ vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled"
bitfld.long 0x00 14. "IRQVCE_SM,IRQ vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled"
bitfld.long 0x00 12. "DAVCE_SM,Data Abort vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "PAVCE_SM,Prefetch Abort vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled"
bitfld.long 0x00 10. "SMCVCE_S,SMC vector catch enable in Secure state" "Disabled,Enabled"
bitfld.long 0x00 7. "FIQVCE_S,FIQ vector catch in Secure state" "Disabled,Enabled"
newline
bitfld.long 0x00 6. "IRQVCE_S,IRG vector catch in Secure state" "Disabled,Enabled"
bitfld.long 0x00 4. "DAVCE_S,Data Abort vector catch in Secure state" "Disabled,Enabled"
bitfld.long 0x00 3. "PAVCE_S,Prefetch Abort vector catch in Secure state" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "SVCVCE_S,SVC vector catch in Secure state" "Disabled,Enabled"
bitfld.long 0x00 1. "UIVCE_S,Undefined instruction vector catch in Secure state" "Disabled,Enabled"
group.long c14:0x0020++0x00
line.long 0x00 "DBGDCCINT,DCC Interrupt Enable Register"
bitfld.long 0x00 30. "RX,DCC interrupt request enable control for DTRRX" "Disabled,Enabled"
bitfld.long 0x00 29. "TX,DCC interrupt request enable control for DTRTX" "Disabled,Enabled"
group.long c14:0x0200++0x0
line.long 0x00 "DBGDTRRXEXT,Debug Receive Register (External View)"
group.long c14:0x0220++0x0
line.long 0x00 "DBGDSCREXT,Debug Status and Control Register (External View)"
bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full"
bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full"
bitfld.long 0x00 27. "RXO,Used for save/restore of EDSCR.RXO" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "TXU,Used for save/restore of EDSCR.TXU" "Disabled,Enabled"
bitfld.long 0x00 21. "TDA,Used for save/restore of EDSCR.TDA" "Disabled,Enabled"
bitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure"
newline
bitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes"
bitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes"
bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 14. "HDE,Used for save/restore of EDSCR.HDE" "Disabled,Enabled"
bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes"
bitfld.long 0x00 6. "ERR,Used for save/restore of EDSCR.ERR" "Disabled,Enabled"
newline
bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,BKPT Instruction,Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Synchronous Watchpoint,?..."
rgroup.long c14:0x0010++0x0
line.long 0x00 "DBGDSCRINT,Debug Status and Control Register (Internal View)"
bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full"
bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full"
bitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure"
newline
bitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes"
bitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes"
bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes"
bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,BKPT Instruction,Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Synchronous Watchpoint,?..."
wgroup.long c14:0x0230++0x0
line.long 0x00 "DBGDTRTXEXT,Debug Transmit Register (External View)"
group.long c14:0x0050++0x0
line.long 0x00 "DBGDTRTXINT,Debug Transmit/Receive Register (Internal View)"
group.long c14:0x0687++0x0
line.long 0x0 "DBGCLAIMSET,Claim Tag Set Register"
bitfld.long 0x0 7. "CT7,Claim Tag 7 Set" "Not set,Set"
bitfld.long 0x0 6. "CT6,Claim Tag 6 Set" "Not set,Set"
bitfld.long 0x0 5. "CT5,Claim Tag 5 Set" "Not set,Set"
newline
bitfld.long 0x0 4. "CT4,Claim Tag 4 Set" "Not set,Set"
bitfld.long 0x0 3. "CT3,Claim Tag 3 Set" "Not set,Set"
bitfld.long 0x0 2. "CT2,Claim Tag 2 Set" "Not set,Set"
newline
bitfld.long 0x0 1. "CT1,Claim Tag 1 Set" "Not set,Set"
bitfld.long 0x0 0. "CT0,Claim Tag 0 Set" "Not set,Set"
group.long c14:0x0697++0x0
line.long 0x0 "DBGCLAIMCLR,Claim Tag Clear Register"
bitfld.long 0x0 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared"
bitfld.long 0x0 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared"
bitfld.long 0x0 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared"
newline
bitfld.long 0x0 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared"
bitfld.long 0x0 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared"
bitfld.long 0x0 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared"
newline
bitfld.long 0x0 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared"
bitfld.long 0x0 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared"
rgroup.long c14:0x06E7++0x0
line.long 0x0 "DBGAUTHSTATUS,Debug Authentication Status Register"
bitfld.long 0x00 7. "SNDFI,Secure non-invasive debug features implementation" "No effect,Implemented"
bitfld.long 0x00 6. "SNDE,Secure non-invasive debug enable" "Disabled,Enabled"
bitfld.long 0x00 5. "SIDFI,Secure invasive debug features implementation" "No effect,Implemented"
newline
bitfld.long 0x00 4. "SIDE,Secure invasive debug enable" "Disabled,Enabled"
bitfld.long 0x00 3. "NSNDFI,Non-secure non-invasive debug features implementation" "Not implemented,Implemented"
bitfld.long 0x00 2. "NSNDE,Non-secure non-invasive debug enable" "0,1"
newline
bitfld.long 0x00 1. "NSIDFI,Non-secure invasive debug features implementation" "Not implemented,Implemented"
bitfld.long 0x00 0. "NSIDE,Non-secure invasive debug enable" "0,1"
rgroup.long c14:0x0707++0x0
line.long 0x0 "DBGDEVID2,Debug Device ID Register 2"
rgroup.long c14:0x0717++0x0
line.long 0x0 "DBGDEVID1,Debug Device ID Register 1"
bitfld.long 0x00 0.--3. "PCSROFFSET,This field defines the offset applied to DBGPCSR samples" "0,1,No offset,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long c14:0x0727++0x00
line.long 0x00 "DBGDEVID,Debug Device ID Register 0"
bitfld.long 0x00 28.--31. "CIDMASK,Specifies the level of support for the Context ID matching breakpoint masking capability" "Not implemented,?..."
bitfld.long 0x00 24.--27. "AUXREGS,Specifies support for the Debug External Auxiliary Control Register" "Not implemented,?..."
bitfld.long 0x00 20.--23. "DOUBLELOCK,Specifies support for the Debug OS Double Lock Register" "Reserved,Implemented,?..."
newline
bitfld.long 0x00 16.--19. "VIREXTNS,Specifies whether EL2 is implemented" "Reserved,Implemented,?..."
bitfld.long 0x00 12.--15. "VECTORCATCH,Defines the form of the vector catch event implemented" "Implemented,?..."
bitfld.long 0x00 8.--11. "BPADDRMASK,Indicates the level of support for the Immediate Virtual Address(IVA) matching breakpoint masking capability" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implemented"
newline
bitfld.long 0x00 4.--7. "WPADDRMASK,Indicates the level of support for the DVA matching watchpoint masking capability" "Reserved,Implemented,?..."
bitfld.long 0x00 0.--3. "PCSAMPLE,Indicates the level of support for Program Counter sampling using debug registers 40 and 41" "Reserved,Reserved,Reserved,Implemented,?..."
tree.end
newline
rgroup.quad c14:0x10010++0x1
line.quad 0x0 "DBGDRAR,Debug ROM Address Register"
hexmask.quad.word 0x0 32.--47. 0x1 "ROMADDR,ROM physical address"
hexmask.quad.tbyte 0x0 12.--31. 0x10 "ROMADDR,ROM physical address"
bitfld.quad 0x0 1. "VALID1,ROM table address valid" "Not valid,Valid"
newline
bitfld.quad 0x0 0. "VALID0,ROM table address valid" "Not valid,Valid"
rgroup.quad c14:0x10020++0x1
line.quad 0x0 "DBGDSAR,Debug Self Address Offset Register"
wgroup.long c14:0x0401++0x00
line.long 0x00 "DBGOSLAR,Operating System Lock Access Register"
rgroup.long c14:0x0411++0x00
line.long 0x00 "DBGOSLSR,Operating System Lock Status Register"
bitfld.long 0x00 2. "NTT,32-Bit Access" "Not required,Required"
bitfld.long 0x00 1. "OSLK,Status of the OS Lock" "Not locked,Locked"
bitfld.long 0x00 0. 3. "OSLM,OS Lock Model implemented Bit" "Reserved,Reserved,Implemented,?..."
if (((per.l(c14:0x0411))&0x2)==0x2)
group.long c14:0x0260++0x00
line.long 0x00 "DBGOSECCR,Debug OS Lock Exception Catch Control Register"
else
hgroup.long c14:0x0260++0x00
hide.long 0x00 "DBGOSECCR,Debug OS Lock Exception Catch Control Register"
endif
group.long c14:0x0431++0x00
line.long 0x00 "DBGOSDLR,Debug OS Double Lock Register"
bitfld.long 0x00 0. "DLK,OS Double Lock control bit" "Not locked,Locked"
group.long c14:0x0441++0x00
line.long 0x00 "DBGPRCR,Device Power-Down and Reset Control Register"
bitfld.long 0x00 0. "CORENPDRQ,Core No Power down Request" "Low,High"
tree.end
tree "Breakpoint Registers"
if (((per.l(c14:(0x500+0x0)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x0)++0x0 "Breakpoint 0"
line.long 0x00 "DBGBVR0,Breakpoint Value Register (Instruction address)"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x0)))&0xF00000)==(0x800000||0x900000||0xA00000||0xB00000))
hgroup.long c14:(0x0400+0x0)++0x0 "Breakpoint 0"
hide.long 0x00 "DBGBVR0,Breakpoint Value Register (VMID)"
else
group.long c14:(0x0400+0x0)++0x0 "Breakpoint 0"
line.long 0x00 "DBGBVR0,Breakpoint Value Register (Context ID)"
endif
group.long c14:(0x0500+0x0)++0x0
line.long 0x00 "DBGBCR0,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMM,Hypervisor mode match" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((per.l(c14:(0x500+0x10)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x10)++0x0 "Breakpoint 1"
line.long 0x00 "DBGBVR1,Breakpoint Value Register (Instruction address)"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x10)))&0xF00000)==(0x800000||0x900000||0xA00000||0xB00000))
hgroup.long c14:(0x0400+0x10)++0x0 "Breakpoint 1"
hide.long 0x00 "DBGBVR1,Breakpoint Value Register (VMID)"
else
group.long c14:(0x0400+0x10)++0x0 "Breakpoint 1"
line.long 0x00 "DBGBVR1,Breakpoint Value Register (Context ID)"
endif
group.long c14:(0x0500+0x10)++0x0
line.long 0x00 "DBGBCR1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMM,Hypervisor mode match" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((per.l(c14:(0x500+0x20)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x20)++0x0 "Breakpoint 2"
line.long 0x00 "DBGBVR2,Breakpoint Value Register (Instruction address)"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x20)))&0xF00000)==(0x800000||0x900000||0xA00000||0xB00000))
hgroup.long c14:(0x0400+0x20)++0x0 "Breakpoint 2"
hide.long 0x00 "DBGBVR2,Breakpoint Value Register (VMID)"
else
group.long c14:(0x0400+0x20)++0x0 "Breakpoint 2"
line.long 0x00 "DBGBVR2,Breakpoint Value Register (Context ID)"
endif
group.long c14:(0x0500+0x20)++0x0
line.long 0x00 "DBGBCR2,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMM,Hypervisor mode match" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((per.l(c14:(0x500+0x30)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x30)++0x0 "Breakpoint 3"
line.long 0x00 "DBGBVR3,Breakpoint Value Register (Instruction address)"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x30)))&0xF00000)==(0x800000||0x900000||0xA00000||0xB00000))
hgroup.long c14:(0x0400+0x30)++0x0 "Breakpoint 3"
hide.long 0x00 "DBGBVR3,Breakpoint Value Register (VMID)"
else
group.long c14:(0x0400+0x30)++0x0 "Breakpoint 3"
line.long 0x00 "DBGBVR3,Breakpoint Value Register (Context ID)"
endif
group.long c14:(0x0500+0x30)++0x0
line.long 0x00 "DBGBCR3,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMM,Hypervisor mode match" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((per.l(c14:(0x500+0x40)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x40)++0x0 "Breakpoint 4"
line.long 0x00 "DBGBVR4,Breakpoint Value Register (Instruction address)"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x40)))&0xF00000)==(0x800000||0x900000||0xA00000||0xB00000))
hgroup.long c14:(0x0400+0x40)++0x0 "Breakpoint 4"
hide.long 0x00 "DBGBVR4,Breakpoint Value Register (VMID)"
else
group.long c14:(0x0400+0x40)++0x0 "Breakpoint 4"
line.long 0x00 "DBGBVR4,Breakpoint Value Register (Context ID)"
endif
group.long c14:(0x0500+0x40)++0x0
line.long 0x00 "DBGBCR4,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMM,Hypervisor mode match" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
if (((per.l(c14:(0x500+0x50)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x50)++0x0 "Breakpoint 5"
line.long 0x00 "DBGBVR5,Breakpoint Value Register (Instruction address)"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x50)))&0xF00000)==(0x800000||0x900000||0xA00000||0xB00000))
hgroup.long c14:(0x0400+0x50)++0x0 "Breakpoint 5"
hide.long 0x00 "DBGBVR5,Breakpoint Value Register (VMID)"
else
group.long c14:(0x0400+0x50)++0x0 "Breakpoint 5"
line.long 0x00 "DBGBVR5,Breakpoint Value Register (Context ID)"
endif
group.long c14:(0x0500+0x50)++0x0
line.long 0x00 "DBGBCR5,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMM,Hypervisor mode match" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
group.long c14:0x0141++0x0
line.long 0x00 "DBGBXVR4,Debug Breakpoint Extended Value Register 4"
hexmask.long.byte 0x00 0.--7. 1. "VMID, VMID value"
group.long c14:0x0151++0x0
line.long 0x00 "DBGBXVR5,Debug Breakpoint Extended Value Register 5"
hexmask.long.byte 0x00 0.--7. 1. "VMID, VMID value"
tree.end
tree "Watchpoint Control Registers"
group.long c14:(0x0600+0x0)++0x00 "Breakpoint 0"
line.long 0x00 "DBGWVR0,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "DA,Data address"
group.long c14:(0x0700+0x0)++0x00
line.long 0x00 "DBGWCR0,Watchpoint Control Register"
bitfld.long 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.long 0x0 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match"
bitfld.long 0x0 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15"
newline
bitfld.long 0x0 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x0 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled"
hexmask.long.byte 0x0 5.--12. "BAS,Byte address select"
newline
bitfld.long 0x0 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any"
bitfld.long 0x0 1.--2. "PAC,Privileged Access control" "Reserved,Match privileged accesses,Match unprivileged accesses,Match all accesses"
bitfld.long 0x0 0. "WE,Watchpoint enable" "Disabled,Enabled"
group.long c14:(0x0600+0x10)++0x00 "Breakpoint 1"
line.long 0x00 "DBGWVR1,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "DA,Data address"
group.long c14:(0x0700+0x10)++0x00
line.long 0x00 "DBGWCR1,Watchpoint Control Register"
bitfld.long 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.long 0x0 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match"
bitfld.long 0x0 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15"
newline
bitfld.long 0x0 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x0 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled"
hexmask.long.byte 0x0 5.--12. "BAS,Byte address select"
newline
bitfld.long 0x0 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any"
bitfld.long 0x0 1.--2. "PAC,Privileged Access control" "Reserved,Match privileged accesses,Match unprivileged accesses,Match all accesses"
bitfld.long 0x0 0. "WE,Watchpoint enable" "Disabled,Enabled"
group.long c14:(0x0600+0x20)++0x00 "Breakpoint 2"
line.long 0x00 "DBGWVR2,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "DA,Data address"
group.long c14:(0x0700+0x20)++0x00
line.long 0x00 "DBGWCR2,Watchpoint Control Register"
bitfld.long 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.long 0x0 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match"
bitfld.long 0x0 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15"
newline
bitfld.long 0x0 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x0 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled"
hexmask.long.byte 0x0 5.--12. "BAS,Byte address select"
newline
bitfld.long 0x0 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any"
bitfld.long 0x0 1.--2. "PAC,Privileged Access control" "Reserved,Match privileged accesses,Match unprivileged accesses,Match all accesses"
bitfld.long 0x0 0. "WE,Watchpoint enable" "Disabled,Enabled"
group.long c14:(0x0600+0x30)++0x00 "Breakpoint 3"
line.long 0x00 "DBGWVR3,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "DA,Data address"
group.long c14:(0x0700+0x30)++0x00
line.long 0x00 "DBGWCR3,Watchpoint Control Register"
bitfld.long 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.long 0x0 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match"
bitfld.long 0x0 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15"
newline
bitfld.long 0x0 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x0 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled"
hexmask.long.byte 0x0 5.--12. "BAS,Byte address select"
newline
bitfld.long 0x0 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any"
bitfld.long 0x0 1.--2. "PAC,Privileged Access control" "Reserved,Match privileged accesses,Match unprivileged accesses,Match all accesses"
bitfld.long 0x0 0. "WE,Watchpoint enable" "Disabled,Enabled"
tree.end
tree.end
AUTOINDENT.OFF
AUTOINDENT.POP
tree.open "Interrupt Controller (GIC-400)"
width 17.
width 17.
base ad:0xFFFC1000
tree "Distributor Interface"
if (((per.l(ad:0xFFFC1000+0x04))&0x400)==0x400)
if PER.ADDRESS.isSECUREEX(ad:0xFFFC1000)
group.long 0x0000++0x03
line.long 0x00 "GICD_CTLR,Distributor Control Register (Secure access)"
bitfld.long 0x00 1. " ENABLEGRP1    ,Global Interrupt Enable Group 1" "Disabled,Enabled"
bitfld.long 0x00 0. "         ENABLEGRP0    ,Global Interrupt Enable Group 1" "Disabled,Enabled"
else
group.long 0x0000++0x03
line.long 0x00 "GICD_CTLR,Distributor Control Register (Non-secure access)"
bitfld.long 0x00 0. " ENABLE        ,Global enable for forwarding pending interrupts from the Distributor to the CPU interfaces" "Disabled,Enabled"
endif
else
group.long 0x0000++0x03
line.long 0x00 "GICD_CTLR,Distributor Control Register"
bitfld.long 0x00 0. " ENABLE        ,Global enable for forwarding pending interrupts from the Distributor to the CPU interfaces" "Disabled,Enabled"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x400)==0x400)
rgroup.long 0x0004++0x03
line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register"
bitfld.long 0x00 11.--15. " LSPI          ,Locable Shared Peripheral Interrupts" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 10. "               SECURITYEXTN  ,Indicate whether interrupt controller implements the security extensions" "Not implemented,Implemented"
textline "                          "
bitfld.long 0x00 5.--7. " CPUNUMBER     ,Indicates the number of implemented CPU interfaces" "1,2,3,4,?..."
bitfld.long 0x00 0.--4. "                ITLN          ,Indicates the number of interrupts that the interrupt controller supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Up to 1020"
else
rgroup.long 0x0004++0x03
line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register"
bitfld.long 0x00 10. " SECURITYEXTN  ,Indicates whether interrupt controller implements the security extensions" "Not implemented,Implemented"
textline "                          "
bitfld.long 0x00 5.--7. " CPUNUMBER     ,Indicates the number of implemented CPU interfaces" "1,2,3,4,?..."
bitfld.long 0x00 0.--4. "                ITLN          ,Indicates the number of interrupts that the interrupt controller supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Up to 1020"
endif
rgroup.long 0x0008++0x03
line.long 0x00 "GICD_IIDR,Distributor Implementer Identification Register"
bitfld.long 0x00 24.--31. " PRODID        ,Indicates the product ID" "PL390,PL390,GIC400,GIC400,?..."
bitfld.long 0x00 16.--19. "           VAR           ,Major revison number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                          "
bitfld.long 0x00 12.--15. " REV           ,Minor revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "               IMP           ,Implementer"
sif CPU.FEATURE(hypervisor)||CPU.FEATURE(secure)
width 17.
tree "Group/Security Registers"
if PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x0080)
group.long 0x0080++0x03
line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Secure Access)"
bitfld.long 0x00 31. " GSB31   ,Group Status Bit 31" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB30   ,Group Status Bit 30" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB29   ,Group Status Bit 29" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB28   ,Group Status Bit 28" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB27   ,Group Status Bit 27" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB26   ,Group Status Bit 26" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB25   ,Group Status Bit 25" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB24   ,Group Status Bit 24" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB23   ,Group Status Bit 23" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB22   ,Group Status Bit 22" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB21   ,Group Status Bit 21" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB20   ,Group Status Bit 20" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB19   ,Group Status Bit 19" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB18   ,Group Status Bit 18" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB17   ,Group Status Bit 17" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB16   ,Group Status Bit 16" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB15   ,Group Status Bit 15" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB14   ,Group Status Bit 14" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB13   ,Group Status Bit 13" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB12   ,Group Status Bit 12" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB11   ,Group Status Bit 11" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB10   ,Group Status Bit 10" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB9    ,Group Status Bit 9" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB8    ,Group Status Bit 8" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB7    ,Group Status Bit 7" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB6    ,Group Status Bit 6" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB5    ,Group Status Bit 5" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB4    ,Group Status Bit 4" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB3    ,Group Status Bit 3" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB2    ,Group Status Bit 2" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB1    ,Group Status Bit 1" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB0    ,Group Status Bit 0" "Group 0 (Secure),Group 1 (Non-secure)"
else
group.long 0x0080++0x03
line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Non-secure access)"
bitfld.long 0x00 31. " GSB31   ,Group Status Bit 31" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB30   ,Group Status Bit 30" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB29   ,Group Status Bit 29" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB28   ,Group Status Bit 28" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB27   ,Group Status Bit 27" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB26   ,Group Status Bit 26" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB25   ,Group Status Bit 25" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB24   ,Group Status Bit 24" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB23   ,Group Status Bit 23" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB22   ,Group Status Bit 22" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB21   ,Group Status Bit 21" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB20   ,Group Status Bit 20" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB19   ,Group Status Bit 19" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB18   ,Group Status Bit 18" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB17   ,Group Status Bit 17" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB16   ,Group Status Bit 16" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB15   ,Group Status Bit 15" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB14   ,Group Status Bit 14" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB13   ,Group Status Bit 13" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB12   ,Group Status Bit 12" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB11   ,Group Status Bit 11" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB10   ,Group Status Bit 10" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB9    ,Group Status Bit 9" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB8    ,Group Status Bit 8" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB7    ,Group Status Bit 7" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB6    ,Group Status Bit 6" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB5    ,Group Status Bit 5" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB4    ,Group Status Bit 4" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB3    ,Group Status Bit 3" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB2    ,Group Status Bit 2" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB1    ,Group Status Bit 1" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB0    ,Group Status Bit 0" "Group 0,Group 1"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x0084))
group.long 0x0084++0x03
line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1 (Secure Access)"
bitfld.long 0x00 31. " GSB63   ,Group Status Bit 63" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB62   ,Group Status Bit 62" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB61   ,Group Status Bit 61" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB60   ,Group Status Bit 60" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB59   ,Group Status Bit 59" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB58   ,Group Status Bit 58" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB57   ,Group Status Bit 57" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB56   ,Group Status Bit 56" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB55   ,Group Status Bit 55" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB54   ,Group Status Bit 54" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB53   ,Group Status Bit 53" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB52   ,Group Status Bit 52" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB51   ,Group Status Bit 51" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB50   ,Group Status Bit 50" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB49   ,Group Status Bit 49" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB48   ,Group Status Bit 48" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB47   ,Group Status Bit 47" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB46   ,Group Status Bit 46" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB45   ,Group Status Bit 45" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB44   ,Group Status Bit 44" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB43   ,Group Status Bit 43" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB42   ,Group Status Bit 42" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB41   ,Group Status Bit 41" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB40   ,Group Status Bit 40" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB39   ,Group Status Bit 39" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB38   ,Group Status Bit 38" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB37   ,Group Status Bit 37" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB36   ,Group Status Bit 36" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB35   ,Group Status Bit 35" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB34   ,Group Status Bit 34" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB33   ,Group Status Bit 33" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB32   ,Group Status Bit 32" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)
group.long 0x0084++0x03
line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1 (Non-secure access)"
bitfld.long 0x00 31. " GSB63   ,Group Status Bit 63" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB62   ,Group Status Bit 62" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB61   ,Group Status Bit 61" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB60   ,Group Status Bit 60" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB59   ,Group Status Bit 59" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB58   ,Group Status Bit 58" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB57   ,Group Status Bit 57" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB56   ,Group Status Bit 56" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB55   ,Group Status Bit 55" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB54   ,Group Status Bit 54" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB53   ,Group Status Bit 53" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB52   ,Group Status Bit 52" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB51   ,Group Status Bit 51" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB50   ,Group Status Bit 50" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB49   ,Group Status Bit 49" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB48   ,Group Status Bit 48" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB47   ,Group Status Bit 47" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB46   ,Group Status Bit 46" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB45   ,Group Status Bit 45" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB44   ,Group Status Bit 44" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB43   ,Group Status Bit 43" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB42   ,Group Status Bit 42" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB41   ,Group Status Bit 41" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB40   ,Group Status Bit 40" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB39   ,Group Status Bit 39" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB38   ,Group Status Bit 38" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB37   ,Group Status Bit 37" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB36   ,Group Status Bit 36" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB35   ,Group Status Bit 35" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB34   ,Group Status Bit 34" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB33   ,Group Status Bit 33" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB32   ,Group Status Bit 32" "Group 0,Group 1"
else
rgroup.long 0x0084++0x03
line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x0088))
group.long 0x0088++0x03
line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2 (Secure access)"
bitfld.long 0x00 31. " GSB95   ,Group Status Bit 95" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB94   ,Group Status Bit 94" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB93   ,Group Status Bit 93" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB92   ,Group Status Bit 92" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB91   ,Group Status Bit 91" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB90   ,Group Status Bit 90" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB89   ,Group Status Bit 89" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB88   ,Group Status Bit 88" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB87   ,Group Status Bit 87" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB86   ,Group Status Bit 86" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB85   ,Group Status Bit 85" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB84   ,Group Status Bit 84" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB83   ,Group Status Bit 83" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB82   ,Group Status Bit 82" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB81   ,Group Status Bit 81" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB80   ,Group Status Bit 80" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB79   ,Group Status Bit 79" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB78   ,Group Status Bit 78" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB77   ,Group Status Bit 77" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB76   ,Group Status Bit 76" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB75   ,Group Status Bit 75" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB74   ,Group Status Bit 74" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB73   ,Group Status Bit 73" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB72   ,Group Status Bit 72" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB71   ,Group Status Bit 71" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB70   ,Group Status Bit 70" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB69   ,Group Status Bit 69" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB68   ,Group Status Bit 68" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB67   ,Group Status Bit 67" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB66   ,Group Status Bit 66" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB65   ,Group Status Bit 65" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB64   ,Group Status Bit 64" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)
group.long 0x0088++0x03
line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2 (Non-secure access)"
bitfld.long 0x00 31. " GSB95   ,Group Status Bit 95" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB94   ,Group Status Bit 94" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB93   ,Group Status Bit 93" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB92   ,Group Status Bit 92" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB91   ,Group Status Bit 91" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB90   ,Group Status Bit 90" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB89   ,Group Status Bit 89" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB88   ,Group Status Bit 88" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB87   ,Group Status Bit 87" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB86   ,Group Status Bit 86" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB85   ,Group Status Bit 85" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB84   ,Group Status Bit 84" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB83   ,Group Status Bit 83" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB82   ,Group Status Bit 82" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB81   ,Group Status Bit 81" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB80   ,Group Status Bit 80" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB79   ,Group Status Bit 79" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB78   ,Group Status Bit 78" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB77   ,Group Status Bit 77" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB76   ,Group Status Bit 76" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB75   ,Group Status Bit 75" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB74   ,Group Status Bit 74" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB73   ,Group Status Bit 73" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB72   ,Group Status Bit 72" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB71   ,Group Status Bit 71" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB70   ,Group Status Bit 70" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB69   ,Group Status Bit 69" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB68   ,Group Status Bit 68" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB67   ,Group Status Bit 67" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB66   ,Group Status Bit 66" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB65   ,Group Status Bit 65" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB64   ,Group Status Bit 64" "Group 0,Group 1"
else
rgroup.long 0x0088++0x03
line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x008C))
group.long 0x008C++0x03
line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3 (Secure access)"
bitfld.long 0x00 31. " GSB127  ,Group Status Bit 127" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB126  ,Group Status Bit 126" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB125  ,Group Status Bit 125" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB124  ,Group Status Bit 124" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB123  ,Group Status Bit 123" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB122  ,Group Status Bit 122" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB121  ,Group Status Bit 121" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB120  ,Group Status Bit 120" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB119  ,Group Status Bit 119" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB118  ,Group Status Bit 118" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB117  ,Group Status Bit 117" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB116  ,Group Status Bit 116" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB115  ,Group Status Bit 115" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB114  ,Group Status Bit 114" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB113  ,Group Status Bit 113" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB112  ,Group Status Bit 112" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB111  ,Group Status Bit 111" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB110  ,Group Status Bit 110" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB109  ,Group Status Bit 109" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB108  ,Group Status Bit 108" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB107  ,Group Status Bit 107" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB106  ,Group Status Bit 106" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB105  ,Group Status Bit 105" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB104  ,Group Status Bit 104" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB103  ,Group Status Bit 103" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB102  ,Group Status Bit 102" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB101  ,Group Status Bit 101" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB100  ,Group Status Bit 100" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB99   ,Group Status Bit 99" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB98   ,Group Status Bit 98" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB97   ,Group Status Bit 97" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB96   ,Group Status Bit 96" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)
group.long 0x008C++0x03
line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3 (Non-secure access)"
bitfld.long 0x00 31. " GSB127  ,Group Status Bit 127" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB126  ,Group Status Bit 126" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB125  ,Group Status Bit 125" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB124  ,Group Status Bit 124" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB123  ,Group Status Bit 123" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB122  ,Group Status Bit 122" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB121  ,Group Status Bit 121" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB120  ,Group Status Bit 120" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB119  ,Group Status Bit 119" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB118  ,Group Status Bit 118" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB117  ,Group Status Bit 117" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB116  ,Group Status Bit 116" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB115  ,Group Status Bit 115" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB114  ,Group Status Bit 114" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB113  ,Group Status Bit 113" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB112  ,Group Status Bit 112" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB111  ,Group Status Bit 111" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB110  ,Group Status Bit 110" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB109  ,Group Status Bit 109" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB108  ,Group Status Bit 108" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB107  ,Group Status Bit 107" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB106  ,Group Status Bit 106" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB105  ,Group Status Bit 105" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB104  ,Group Status Bit 104" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB103  ,Group Status Bit 103" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB102  ,Group Status Bit 102" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB101  ,Group Status Bit 101" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB100  ,Group Status Bit 100" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB99   ,Group Status Bit 99" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB98   ,Group Status Bit 98" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB97   ,Group Status Bit 97" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB96   ,Group Status Bit 96" "Group 0,Group 1"
else
rgroup.long 0x008C++0x03
line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x0090))
group.long 0x0090++0x03
line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4 (Secure access)"
bitfld.long 0x00 31. " GSB159  ,Group Status Bit 159" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB158  ,Group Status Bit 158" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB157  ,Group Status Bit 157" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB156  ,Group Status Bit 156" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB155  ,Group Status Bit 155" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB154  ,Group Status Bit 154" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB153  ,Group Status Bit 153" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB152  ,Group Status Bit 152" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB151  ,Group Status Bit 151" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB150  ,Group Status Bit 150" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB149  ,Group Status Bit 149" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB148  ,Group Status Bit 148" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB147  ,Group Status Bit 147" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB146  ,Group Status Bit 146" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB145  ,Group Status Bit 145" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB144  ,Group Status Bit 144" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB143  ,Group Status Bit 143" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB142  ,Group Status Bit 142" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB141  ,Group Status Bit 141" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB140  ,Group Status Bit 140" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB139  ,Group Status Bit 139" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB138  ,Group Status Bit 138" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB137  ,Group Status Bit 137" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB136  ,Group Status Bit 136" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB135  ,Group Status Bit 135" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB134  ,Group Status Bit 134" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB133  ,Group Status Bit 133" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB132  ,Group Status Bit 132" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB131  ,Group Status Bit 131" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB130  ,Group Status Bit 130" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB129  ,Group Status Bit 129" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB128  ,Group Status Bit 128" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)
group.long 0x0090++0x03
line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4 (Non-secure access)"
bitfld.long 0x00 31. " GSB159  ,Group Status Bit 159" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB158  ,Group Status Bit 158" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB157  ,Group Status Bit 157" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB156  ,Group Status Bit 156" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB155  ,Group Status Bit 155" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB154  ,Group Status Bit 154" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB153  ,Group Status Bit 153" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB152  ,Group Status Bit 152" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB151  ,Group Status Bit 151" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB150  ,Group Status Bit 150" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB149  ,Group Status Bit 149" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB148  ,Group Status Bit 148" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB147  ,Group Status Bit 147" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB146  ,Group Status Bit 146" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB145  ,Group Status Bit 145" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB144  ,Group Status Bit 144" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB143  ,Group Status Bit 143" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB142  ,Group Status Bit 142" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB141  ,Group Status Bit 141" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB140  ,Group Status Bit 140" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB139  ,Group Status Bit 139" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB138  ,Group Status Bit 138" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB137  ,Group Status Bit 137" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB136  ,Group Status Bit 136" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB135  ,Group Status Bit 135" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB134  ,Group Status Bit 134" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB133  ,Group Status Bit 133" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB132  ,Group Status Bit 132" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB131  ,Group Status Bit 131" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB130  ,Group Status Bit 130" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB129  ,Group Status Bit 129" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB128  ,Group Status Bit 128" "Group 0,Group 1"
else
rgroup.long 0x0090++0x03
line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x0094))
group.long 0x0094++0x03
line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5 (Secure access)"
bitfld.long 0x00 31. " GSB191  ,Group Status Bit 191" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB190  ,Group Status Bit 190" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB189  ,Group Status Bit 189" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB188  ,Group Status Bit 188" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB187  ,Group Status Bit 187" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB186  ,Group Status Bit 186" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB185  ,Group Status Bit 185" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB184  ,Group Status Bit 184" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB183  ,Group Status Bit 183" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB182  ,Group Status Bit 182" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB181  ,Group Status Bit 181" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB180  ,Group Status Bit 180" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB179  ,Group Status Bit 179" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB178  ,Group Status Bit 178" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB177  ,Group Status Bit 177" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB176  ,Group Status Bit 176" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB175  ,Group Status Bit 175" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB174  ,Group Status Bit 174" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB173  ,Group Status Bit 173" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB172  ,Group Status Bit 172" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB171  ,Group Status Bit 171" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB170  ,Group Status Bit 170" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB169  ,Group Status Bit 169" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB168  ,Group Status Bit 168" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB167  ,Group Status Bit 167" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB166  ,Group Status Bit 166" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB165  ,Group Status Bit 165" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB164  ,Group Status Bit 164" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB163  ,Group Status Bit 163" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB162  ,Group Status Bit 162" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB161  ,Group Status Bit 161" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB160  ,Group Status Bit 160" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)
group.long 0x0094++0x03
line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5 (Non-secure access)"
bitfld.long 0x00 31. " GSB191  ,Group Status Bit 191" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB190  ,Group Status Bit 190" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB189  ,Group Status Bit 189" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB188  ,Group Status Bit 188" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB187  ,Group Status Bit 187" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB186  ,Group Status Bit 186" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB185  ,Group Status Bit 185" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB184  ,Group Status Bit 184" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB183  ,Group Status Bit 183" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB182  ,Group Status Bit 182" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB181  ,Group Status Bit 181" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB180  ,Group Status Bit 180" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB179  ,Group Status Bit 179" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB178  ,Group Status Bit 178" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB177  ,Group Status Bit 177" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB176  ,Group Status Bit 176" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB175  ,Group Status Bit 175" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB174  ,Group Status Bit 174" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB173  ,Group Status Bit 173" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB172  ,Group Status Bit 172" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB171  ,Group Status Bit 171" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB170  ,Group Status Bit 170" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB169  ,Group Status Bit 169" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB168  ,Group Status Bit 168" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB167  ,Group Status Bit 167" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB166  ,Group Status Bit 166" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB165  ,Group Status Bit 165" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB164  ,Group Status Bit 164" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB163  ,Group Status Bit 163" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB162  ,Group Status Bit 162" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB161  ,Group Status Bit 161" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB160  ,Group Status Bit 160" "Group 0,Group 1"
else
rgroup.long 0x0094++0x03
line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x0098))
group.long 0x0098++0x03
line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6 (Secure access)"
bitfld.long 0x00 31. " GSB223  ,Group Status Bit 223" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB222  ,Group Status Bit 222" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB221  ,Group Status Bit 221" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB220  ,Group Status Bit 220" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB219  ,Group Status Bit 219" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB218  ,Group Status Bit 218" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB217  ,Group Status Bit 217" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB216  ,Group Status Bit 216" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB215  ,Group Status Bit 215" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB214  ,Group Status Bit 214" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB213  ,Group Status Bit 213" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB212  ,Group Status Bit 212" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB211  ,Group Status Bit 211" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB210  ,Group Status Bit 210" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB209  ,Group Status Bit 209" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB208  ,Group Status Bit 208" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB207  ,Group Status Bit 207" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB206  ,Group Status Bit 206" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB205  ,Group Status Bit 205" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB204  ,Group Status Bit 204" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB203  ,Group Status Bit 203" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB202  ,Group Status Bit 202" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB201  ,Group Status Bit 201" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB200  ,Group Status Bit 200" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB199  ,Group Status Bit 199" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB198  ,Group Status Bit 198" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB197  ,Group Status Bit 197" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB196  ,Group Status Bit 196" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB195  ,Group Status Bit 195" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB194  ,Group Status Bit 194" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB193  ,Group Status Bit 193" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB192  ,Group Status Bit 192" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)
group.long 0x0098++0x03
line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6 (Non-secure access)"
bitfld.long 0x00 31. " GSB223  ,Group Status Bit 223" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB222  ,Group Status Bit 222" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB221  ,Group Status Bit 221" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB220  ,Group Status Bit 220" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB219  ,Group Status Bit 219" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB218  ,Group Status Bit 218" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB217  ,Group Status Bit 217" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB216  ,Group Status Bit 216" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB215  ,Group Status Bit 215" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB214  ,Group Status Bit 214" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB213  ,Group Status Bit 213" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB212  ,Group Status Bit 212" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB211  ,Group Status Bit 211" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB210  ,Group Status Bit 210" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB209  ,Group Status Bit 209" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB208  ,Group Status Bit 208" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB207  ,Group Status Bit 207" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB206  ,Group Status Bit 206" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB205  ,Group Status Bit 205" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB204  ,Group Status Bit 204" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB203  ,Group Status Bit 203" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB202  ,Group Status Bit 202" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB201  ,Group Status Bit 201" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB200  ,Group Status Bit 200" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB199  ,Group Status Bit 199" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB198  ,Group Status Bit 198" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB197  ,Group Status Bit 197" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB196  ,Group Status Bit 196" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB195  ,Group Status Bit 195" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB194  ,Group Status Bit 194" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB193  ,Group Status Bit 193" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB192  ,Group Status Bit 192" "Group 0,Group 1"
else
rgroup.long 0x0098++0x03
line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x009C))
group.long 0x009C++0x03
line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7 (Secure access)"
bitfld.long 0x00 31. " GSB255  ,Group Status Bit 255" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB254  ,Group Status Bit 254" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB253  ,Group Status Bit 253" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB252  ,Group Status Bit 252" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB251  ,Group Status Bit 251" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB250  ,Group Status Bit 250" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB249  ,Group Status Bit 249" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB248  ,Group Status Bit 248" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB247  ,Group Status Bit 247" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB246  ,Group Status Bit 246" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB245  ,Group Status Bit 245" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB244  ,Group Status Bit 244" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB243  ,Group Status Bit 243" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB242  ,Group Status Bit 242" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB241  ,Group Status Bit 241" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB240  ,Group Status Bit 240" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB239  ,Group Status Bit 239" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB238  ,Group Status Bit 238" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB237  ,Group Status Bit 237" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB236  ,Group Status Bit 236" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB235  ,Group Status Bit 235" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB234  ,Group Status Bit 234" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB233  ,Group Status Bit 233" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB232  ,Group Status Bit 232" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB231  ,Group Status Bit 231" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB230  ,Group Status Bit 230" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB229  ,Group Status Bit 229" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB228  ,Group Status Bit 228" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB227  ,Group Status Bit 227" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB226  ,Group Status Bit 226" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB225  ,Group Status Bit 225" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB224  ,Group Status Bit 224" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)
group.long 0x009C++0x03
line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7 (Non-secure access)"
bitfld.long 0x00 31. " GSB255  ,Group Status Bit 255" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB254  ,Group Status Bit 254" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB253  ,Group Status Bit 253" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB252  ,Group Status Bit 252" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB251  ,Group Status Bit 251" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB250  ,Group Status Bit 250" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB249  ,Group Status Bit 249" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB248  ,Group Status Bit 248" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB247  ,Group Status Bit 247" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB246  ,Group Status Bit 246" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB245  ,Group Status Bit 245" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB244  ,Group Status Bit 244" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB243  ,Group Status Bit 243" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB242  ,Group Status Bit 242" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB241  ,Group Status Bit 241" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB240  ,Group Status Bit 240" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB239  ,Group Status Bit 239" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB238  ,Group Status Bit 238" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB237  ,Group Status Bit 237" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB236  ,Group Status Bit 236" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB235  ,Group Status Bit 235" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB234  ,Group Status Bit 234" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB233  ,Group Status Bit 233" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB232  ,Group Status Bit 232" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB231  ,Group Status Bit 231" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB230  ,Group Status Bit 230" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB229  ,Group Status Bit 229" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB228  ,Group Status Bit 228" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB227  ,Group Status Bit 227" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB226  ,Group Status Bit 226" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB225  ,Group Status Bit 225" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB224  ,Group Status Bit 224" "Group 0,Group 1"
else
rgroup.long 0x009C++0x03
line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00A0))
group.long 0x00A0++0x03
line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8 (Secure access)"
bitfld.long 0x00 31. " GSB287  ,Group Status Bit 287" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB286  ,Group Status Bit 286" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB285  ,Group Status Bit 285" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB284  ,Group Status Bit 284" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB283  ,Group Status Bit 283" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB282  ,Group Status Bit 282" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB281  ,Group Status Bit 281" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB280  ,Group Status Bit 280" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB279  ,Group Status Bit 279" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB278  ,Group Status Bit 278" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB277  ,Group Status Bit 277" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB276  ,Group Status Bit 276" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB275  ,Group Status Bit 275" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB274  ,Group Status Bit 274" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB273  ,Group Status Bit 273" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB272  ,Group Status Bit 272" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB271  ,Group Status Bit 271" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB270  ,Group Status Bit 270" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB269  ,Group Status Bit 269" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB268  ,Group Status Bit 268" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB267  ,Group Status Bit 267" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB266  ,Group Status Bit 266" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB265  ,Group Status Bit 265" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB264  ,Group Status Bit 264" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB263  ,Group Status Bit 263" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB262  ,Group Status Bit 262" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB261  ,Group Status Bit 261" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB260  ,Group Status Bit 260" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB259  ,Group Status Bit 259" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB258  ,Group Status Bit 258" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB257  ,Group Status Bit 257" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB256  ,Group Status Bit 256" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)
group.long 0x00A0++0x03
line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8 (Non-secure access)"
bitfld.long 0x00 31. " GSB287  ,Group Status Bit 287" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB286  ,Group Status Bit 286" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB285  ,Group Status Bit 285" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB284  ,Group Status Bit 284" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB283  ,Group Status Bit 283" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB282  ,Group Status Bit 282" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB281  ,Group Status Bit 281" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB280  ,Group Status Bit 280" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB279  ,Group Status Bit 279" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB278  ,Group Status Bit 278" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB277  ,Group Status Bit 277" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB276  ,Group Status Bit 276" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB275  ,Group Status Bit 275" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB274  ,Group Status Bit 274" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB273  ,Group Status Bit 273" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB272  ,Group Status Bit 272" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB271  ,Group Status Bit 271" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB270  ,Group Status Bit 270" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB269  ,Group Status Bit 269" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB268  ,Group Status Bit 268" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB267  ,Group Status Bit 267" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB266  ,Group Status Bit 266" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB265  ,Group Status Bit 265" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB264  ,Group Status Bit 264" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB263  ,Group Status Bit 263" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB262  ,Group Status Bit 262" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB261  ,Group Status Bit 261" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB260  ,Group Status Bit 260" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB259  ,Group Status Bit 259" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB258  ,Group Status Bit 258" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB257  ,Group Status Bit 257" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB256  ,Group Status Bit 256" "Group 0,Group 1"
else
rgroup.long 0x00A0++0x03
line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00A4))
group.long 0x00A4++0x03
line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9 (Secure access)"
bitfld.long 0x00 31. " GSB319  ,Group Status Bit 319" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB318  ,Group Status Bit 318" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB317  ,Group Status Bit 317" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB316  ,Group Status Bit 316" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB315  ,Group Status Bit 315" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB314  ,Group Status Bit 314" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB313  ,Group Status Bit 313" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB312  ,Group Status Bit 312" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB311  ,Group Status Bit 311" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB310  ,Group Status Bit 310" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB309  ,Group Status Bit 309" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB308  ,Group Status Bit 308" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB307  ,Group Status Bit 307" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB306  ,Group Status Bit 306" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB305  ,Group Status Bit 305" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB304  ,Group Status Bit 304" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB303  ,Group Status Bit 303" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB302  ,Group Status Bit 302" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB301  ,Group Status Bit 301" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB300  ,Group Status Bit 300" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB299  ,Group Status Bit 299" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB298  ,Group Status Bit 298" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB297  ,Group Status Bit 297" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB296  ,Group Status Bit 296" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB295  ,Group Status Bit 295" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB294  ,Group Status Bit 294" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB293  ,Group Status Bit 293" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB292  ,Group Status Bit 292" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB291  ,Group Status Bit 291" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB290  ,Group Status Bit 290" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB289  ,Group Status Bit 289" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB288  ,Group Status Bit 288" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)
group.long 0x00A4++0x03
line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9 (Non-secure access)"
bitfld.long 0x00 31. " GSB319  ,Group Status Bit 319" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB318  ,Group Status Bit 318" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB317  ,Group Status Bit 317" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB316  ,Group Status Bit 316" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB315  ,Group Status Bit 315" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB314  ,Group Status Bit 314" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB313  ,Group Status Bit 313" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB312  ,Group Status Bit 312" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB311  ,Group Status Bit 311" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB310  ,Group Status Bit 310" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB309  ,Group Status Bit 309" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB308  ,Group Status Bit 308" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB307  ,Group Status Bit 307" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB306  ,Group Status Bit 306" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB305  ,Group Status Bit 305" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB304  ,Group Status Bit 304" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB303  ,Group Status Bit 303" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB302  ,Group Status Bit 302" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB301  ,Group Status Bit 301" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB300  ,Group Status Bit 300" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB299  ,Group Status Bit 299" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB298  ,Group Status Bit 298" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB297  ,Group Status Bit 297" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB296  ,Group Status Bit 296" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB295  ,Group Status Bit 295" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB294  ,Group Status Bit 294" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB293  ,Group Status Bit 293" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB292  ,Group Status Bit 292" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB291  ,Group Status Bit 291" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB290  ,Group Status Bit 290" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB289  ,Group Status Bit 289" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB288  ,Group Status Bit 288" "Group 0,Group 1"
else
rgroup.long 0x00A4++0x03
line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00A8))
group.long 0x00A8++0x03
line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Secure access)"
bitfld.long 0x00 31. " GSB351  ,Group Status Bit 351" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB350  ,Group Status Bit 350" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB349  ,Group Status Bit 349" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB348  ,Group Status Bit 348" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB347  ,Group Status Bit 347" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB346  ,Group Status Bit 346" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB345  ,Group Status Bit 345" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB344  ,Group Status Bit 344" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB343  ,Group Status Bit 343" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB342  ,Group Status Bit 342" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB341  ,Group Status Bit 341" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB340  ,Group Status Bit 340" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB339  ,Group Status Bit 339" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB338  ,Group Status Bit 338" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB337  ,Group Status Bit 337" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB336  ,Group Status Bit 336" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB335  ,Group Status Bit 335" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB334  ,Group Status Bit 334" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB333  ,Group Status Bit 333" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB332  ,Group Status Bit 332" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB331  ,Group Status Bit 331" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB330  ,Group Status Bit 330" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB329  ,Group Status Bit 329" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB328  ,Group Status Bit 328" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB327  ,Group Status Bit 327" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB326  ,Group Status Bit 326" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB325  ,Group Status Bit 325" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB324  ,Group Status Bit 324" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB323  ,Group Status Bit 323" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB322  ,Group Status Bit 322" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB321  ,Group Status Bit 321" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB320  ,Group Status Bit 320" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)
group.long 0x00A8++0x03
line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Non-secure access)"
bitfld.long 0x00 31. " GSB351  ,Group Status Bit 351" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB350  ,Group Status Bit 350" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB349  ,Group Status Bit 349" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB348  ,Group Status Bit 348" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB347  ,Group Status Bit 347" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB346  ,Group Status Bit 346" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB345  ,Group Status Bit 345" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB344  ,Group Status Bit 344" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB343  ,Group Status Bit 343" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB342  ,Group Status Bit 342" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB341  ,Group Status Bit 341" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB340  ,Group Status Bit 340" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB339  ,Group Status Bit 339" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB338  ,Group Status Bit 338" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB337  ,Group Status Bit 337" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB336  ,Group Status Bit 336" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB335  ,Group Status Bit 335" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB334  ,Group Status Bit 334" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB333  ,Group Status Bit 333" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB332  ,Group Status Bit 332" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB331  ,Group Status Bit 331" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB330  ,Group Status Bit 330" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB329  ,Group Status Bit 329" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB328  ,Group Status Bit 328" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB327  ,Group Status Bit 327" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB326  ,Group Status Bit 326" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB325  ,Group Status Bit 325" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB324  ,Group Status Bit 324" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB323  ,Group Status Bit 323" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB322  ,Group Status Bit 322" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB321  ,Group Status Bit 321" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB320  ,Group Status Bit 320" "Group 0,Group 1"
else
rgroup.long 0x00A8++0x03
line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00AC))
group.long 0x00AC++0x03
line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Secure access)"
bitfld.long 0x00 31. " GSB383  ,Group Status Bit 383" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB382  ,Group Status Bit 382" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB381  ,Group Status Bit 381" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB380  ,Group Status Bit 380" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB379  ,Group Status Bit 379" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB378  ,Group Status Bit 378" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB377  ,Group Status Bit 377" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB376  ,Group Status Bit 376" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB375  ,Group Status Bit 375" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB374  ,Group Status Bit 374" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB373  ,Group Status Bit 373" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB372  ,Group Status Bit 372" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB371  ,Group Status Bit 371" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB370  ,Group Status Bit 370" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB369  ,Group Status Bit 369" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB368  ,Group Status Bit 368" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB367  ,Group Status Bit 367" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB366  ,Group Status Bit 366" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB365  ,Group Status Bit 365" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB364  ,Group Status Bit 364" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB363  ,Group Status Bit 363" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB362  ,Group Status Bit 362" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB361  ,Group Status Bit 361" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB360  ,Group Status Bit 360" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB359  ,Group Status Bit 359" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB358  ,Group Status Bit 358" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB357  ,Group Status Bit 357" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB356  ,Group Status Bit 356" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB355  ,Group Status Bit 355" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB354  ,Group Status Bit 354" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB353  ,Group Status Bit 353" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB352  ,Group Status Bit 352" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)
group.long 0x00AC++0x03
line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Non-secure access)"
bitfld.long 0x00 31. " GSB383  ,Group Status Bit 383" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB382  ,Group Status Bit 382" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB381  ,Group Status Bit 381" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB380  ,Group Status Bit 380" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB379  ,Group Status Bit 379" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB378  ,Group Status Bit 378" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB377  ,Group Status Bit 377" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB376  ,Group Status Bit 376" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB375  ,Group Status Bit 375" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB374  ,Group Status Bit 374" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB373  ,Group Status Bit 373" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB372  ,Group Status Bit 372" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB371  ,Group Status Bit 371" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB370  ,Group Status Bit 370" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB369  ,Group Status Bit 369" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB368  ,Group Status Bit 368" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB367  ,Group Status Bit 367" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB366  ,Group Status Bit 366" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB365  ,Group Status Bit 365" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB364  ,Group Status Bit 364" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB363  ,Group Status Bit 363" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB362  ,Group Status Bit 362" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB361  ,Group Status Bit 361" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB360  ,Group Status Bit 360" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB359  ,Group Status Bit 359" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB358  ,Group Status Bit 358" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB357  ,Group Status Bit 357" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB356  ,Group Status Bit 356" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB355  ,Group Status Bit 355" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB354  ,Group Status Bit 354" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB353  ,Group Status Bit 353" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB352  ,Group Status Bit 352" "Group 0,Group 1"
else
rgroup.long 0x00AC++0x03
line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00B0))
group.long 0x00B0++0x03
line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Secure access)"
bitfld.long 0x00 31. " GSB415  ,Group Status Bit 415" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB414  ,Group Status Bit 414" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB413  ,Group Status Bit 413" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB412  ,Group Status Bit 412" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB411  ,Group Status Bit 411" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB410  ,Group Status Bit 410" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB409  ,Group Status Bit 409" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB408  ,Group Status Bit 408" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB407  ,Group Status Bit 407" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB406  ,Group Status Bit 406" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB405  ,Group Status Bit 405" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB404  ,Group Status Bit 404" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB403  ,Group Status Bit 403" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB402  ,Group Status Bit 402" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB401  ,Group Status Bit 401" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB400  ,Group Status Bit 400" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB399  ,Group Status Bit 399" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB398  ,Group Status Bit 398" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB397  ,Group Status Bit 397" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB396  ,Group Status Bit 396" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB395  ,Group Status Bit 395" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB394  ,Group Status Bit 394" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB393  ,Group Status Bit 393" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB392  ,Group Status Bit 392" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB391  ,Group Status Bit 391" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB390  ,Group Status Bit 390" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB389  ,Group Status Bit 389" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB388  ,Group Status Bit 388" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB387  ,Group Status Bit 387" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB386  ,Group Status Bit 386" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB385  ,Group Status Bit 385" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB384  ,Group Status Bit 384" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)
group.long 0x00B0++0x03
line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Non-secure access)"
bitfld.long 0x00 31. " GSB415  ,Group Status Bit 415" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB414  ,Group Status Bit 414" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB413  ,Group Status Bit 413" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB412  ,Group Status Bit 412" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB411  ,Group Status Bit 411" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB410  ,Group Status Bit 410" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB409  ,Group Status Bit 409" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB408  ,Group Status Bit 408" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB407  ,Group Status Bit 407" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB406  ,Group Status Bit 406" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB405  ,Group Status Bit 405" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB404  ,Group Status Bit 404" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB403  ,Group Status Bit 403" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB402  ,Group Status Bit 402" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB401  ,Group Status Bit 401" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB400  ,Group Status Bit 400" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB399  ,Group Status Bit 399" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB398  ,Group Status Bit 398" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB397  ,Group Status Bit 397" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB396  ,Group Status Bit 396" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB395  ,Group Status Bit 395" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB394  ,Group Status Bit 394" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB393  ,Group Status Bit 393" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB392  ,Group Status Bit 392" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB391  ,Group Status Bit 391" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB390  ,Group Status Bit 390" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB389  ,Group Status Bit 389" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB388  ,Group Status Bit 388" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB387  ,Group Status Bit 387" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB386  ,Group Status Bit 386" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB385  ,Group Status Bit 385" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB384  ,Group Status Bit 384" "Group 0,Group 1"
else
rgroup.long 0x00B0++0x03
line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00B4))
group.long 0x00B4++0x03
line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Secure access)"
bitfld.long 0x00 31. " GSB447  ,Group Status Bit 447" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB446  ,Group Status Bit 446" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB445  ,Group Status Bit 445" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB444  ,Group Status Bit 444" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB443  ,Group Status Bit 443" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB442  ,Group Status Bit 442" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB441  ,Group Status Bit 441" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB440  ,Group Status Bit 440" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB439  ,Group Status Bit 439" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB438  ,Group Status Bit 438" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB437  ,Group Status Bit 437" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB436  ,Group Status Bit 436" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB435  ,Group Status Bit 435" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB434  ,Group Status Bit 434" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB433  ,Group Status Bit 433" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB432  ,Group Status Bit 432" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB431  ,Group Status Bit 431" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB430  ,Group Status Bit 430" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB429  ,Group Status Bit 429" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB428  ,Group Status Bit 428" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB427  ,Group Status Bit 427" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB426  ,Group Status Bit 426" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB425  ,Group Status Bit 425" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB424  ,Group Status Bit 424" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB423  ,Group Status Bit 423" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB422  ,Group Status Bit 422" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB421  ,Group Status Bit 421" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB420  ,Group Status Bit 420" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB419  ,Group Status Bit 419" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB418  ,Group Status Bit 418" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB417  ,Group Status Bit 417" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB416  ,Group Status Bit 416" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)
group.long 0x00B4++0x03
line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Non-secure access)"
bitfld.long 0x00 31. " GSB447  ,Group Status Bit 447" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB446  ,Group Status Bit 446" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB445  ,Group Status Bit 445" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB444  ,Group Status Bit 444" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB443  ,Group Status Bit 443" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB442  ,Group Status Bit 442" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB441  ,Group Status Bit 441" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB440  ,Group Status Bit 440" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB439  ,Group Status Bit 439" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB438  ,Group Status Bit 438" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB437  ,Group Status Bit 437" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB436  ,Group Status Bit 436" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB435  ,Group Status Bit 435" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB434  ,Group Status Bit 434" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB433  ,Group Status Bit 433" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB432  ,Group Status Bit 432" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB431  ,Group Status Bit 431" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB430  ,Group Status Bit 430" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB429  ,Group Status Bit 429" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB428  ,Group Status Bit 428" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB427  ,Group Status Bit 427" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB426  ,Group Status Bit 426" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB425  ,Group Status Bit 425" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB424  ,Group Status Bit 424" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB423  ,Group Status Bit 423" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB422  ,Group Status Bit 422" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB421  ,Group Status Bit 421" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB420  ,Group Status Bit 420" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB419  ,Group Status Bit 419" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB418  ,Group Status Bit 418" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB417  ,Group Status Bit 417" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB416  ,Group Status Bit 416" "Group 0,Group 1"
else
rgroup.long 0x00B4++0x03
line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00B8))
group.long 0x00B8++0x03
line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Secure access)"
bitfld.long 0x00 31. " GSB479  ,Group Status Bit 479" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB478  ,Group Status Bit 478" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB477  ,Group Status Bit 477" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB476  ,Group Status Bit 476" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB475  ,Group Status Bit 475" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB474  ,Group Status Bit 474" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB473  ,Group Status Bit 473" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB472  ,Group Status Bit 472" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB471  ,Group Status Bit 471" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB470  ,Group Status Bit 470" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB469  ,Group Status Bit 469" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB468  ,Group Status Bit 468" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB467  ,Group Status Bit 467" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB466  ,Group Status Bit 466" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB465  ,Group Status Bit 465" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB464  ,Group Status Bit 464" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB463  ,Group Status Bit 463" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB462  ,Group Status Bit 462" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB461  ,Group Status Bit 461" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB460  ,Group Status Bit 460" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB459  ,Group Status Bit 459" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB458  ,Group Status Bit 458" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB457  ,Group Status Bit 457" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB456  ,Group Status Bit 456" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB455  ,Group Status Bit 455" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB454  ,Group Status Bit 454" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB453  ,Group Status Bit 453" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB452  ,Group Status Bit 452" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB451  ,Group Status Bit 451" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB450  ,Group Status Bit 450" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB449  ,Group Status Bit 449" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB448  ,Group Status Bit 448" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)
group.long 0x00B8++0x03
line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Non-secure access)"
bitfld.long 0x00 31. " GSB479  ,Group Status Bit 479" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB478  ,Group Status Bit 478" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB477  ,Group Status Bit 477" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB476  ,Group Status Bit 476" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB475  ,Group Status Bit 475" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB474  ,Group Status Bit 474" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB473  ,Group Status Bit 473" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB472  ,Group Status Bit 472" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB471  ,Group Status Bit 471" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB470  ,Group Status Bit 470" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB469  ,Group Status Bit 469" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB468  ,Group Status Bit 468" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB467  ,Group Status Bit 467" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB466  ,Group Status Bit 466" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB465  ,Group Status Bit 465" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB464  ,Group Status Bit 464" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB463  ,Group Status Bit 463" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB462  ,Group Status Bit 462" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB461  ,Group Status Bit 461" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB460  ,Group Status Bit 460" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB459  ,Group Status Bit 459" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB458  ,Group Status Bit 458" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB457  ,Group Status Bit 457" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB456  ,Group Status Bit 456" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB455  ,Group Status Bit 455" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB454  ,Group Status Bit 454" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB453  ,Group Status Bit 453" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB452  ,Group Status Bit 452" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB451  ,Group Status Bit 451" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB450  ,Group Status Bit 450" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB449  ,Group Status Bit 449" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB448  ,Group Status Bit 448" "Group 0,Group 1"
else
rgroup.long 0x00B8++0x03
line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00BC))
group.long 0x00BC++0x03
line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Secure access)"
bitfld.long 0x00 31. " GSB511  ,Group Status Bit 511" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB510  ,Group Status Bit 510" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB509  ,Group Status Bit 509" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB508  ,Group Status Bit 508" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB507  ,Group Status Bit 507" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB506  ,Group Status Bit 506" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB505  ,Group Status Bit 505" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB504  ,Group Status Bit 504" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB503  ,Group Status Bit 503" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB502  ,Group Status Bit 502" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB501  ,Group Status Bit 501" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB500  ,Group Status Bit 500" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB499  ,Group Status Bit 499" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB498  ,Group Status Bit 498" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB497  ,Group Status Bit 497" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB496  ,Group Status Bit 496" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB495  ,Group Status Bit 495" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB494  ,Group Status Bit 494" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB493  ,Group Status Bit 493" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB492  ,Group Status Bit 492" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB491  ,Group Status Bit 491" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB490  ,Group Status Bit 490" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB489  ,Group Status Bit 489" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB488  ,Group Status Bit 488" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB487  ,Group Status Bit 487" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB486  ,Group Status Bit 486" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB485  ,Group Status Bit 485" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB484  ,Group Status Bit 484" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB483  ,Group Status Bit 483" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB482  ,Group Status Bit 482" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB481  ,Group Status Bit 481" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB480  ,Group Status Bit 480" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)
group.long 0x00BC++0x03
line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Non-secure access)"
bitfld.long 0x00 31. " GSB511  ,Group Status Bit 511" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB510  ,Group Status Bit 510" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB509  ,Group Status Bit 509" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB508  ,Group Status Bit 508" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB507  ,Group Status Bit 507" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB506  ,Group Status Bit 506" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB505  ,Group Status Bit 505" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB504  ,Group Status Bit 504" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB503  ,Group Status Bit 503" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB502  ,Group Status Bit 502" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB501  ,Group Status Bit 501" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB500  ,Group Status Bit 500" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB499  ,Group Status Bit 499" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB498  ,Group Status Bit 498" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB497  ,Group Status Bit 497" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB496  ,Group Status Bit 496" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB495  ,Group Status Bit 495" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB494  ,Group Status Bit 494" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB493  ,Group Status Bit 493" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB492  ,Group Status Bit 492" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB491  ,Group Status Bit 491" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB490  ,Group Status Bit 490" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB489  ,Group Status Bit 489" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB488  ,Group Status Bit 488" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB487  ,Group Status Bit 487" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB486  ,Group Status Bit 486" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB485  ,Group Status Bit 485" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB484  ,Group Status Bit 484" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB483  ,Group Status Bit 483" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB482  ,Group Status Bit 482" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB481  ,Group Status Bit 481" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB480  ,Group Status Bit 480" "Group 0,Group 1"
else
rgroup.long 0x00BC++0x03
line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00C0))
group.long 0x00C0++0x03
line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Secure access)"
bitfld.long 0x00 31. " GSB543  ,Group Status Bit 543" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB542  ,Group Status Bit 542" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB541  ,Group Status Bit 541" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB540  ,Group Status Bit 540" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB539  ,Group Status Bit 539" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB538  ,Group Status Bit 538" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB537  ,Group Status Bit 537" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB536  ,Group Status Bit 536" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB535  ,Group Status Bit 535" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB534  ,Group Status Bit 534" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB533  ,Group Status Bit 533" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB532  ,Group Status Bit 532" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB531  ,Group Status Bit 531" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB530  ,Group Status Bit 530" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB529  ,Group Status Bit 529" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB528  ,Group Status Bit 528" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB527  ,Group Status Bit 527" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB526  ,Group Status Bit 526" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB525  ,Group Status Bit 525" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB524  ,Group Status Bit 524" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB523  ,Group Status Bit 523" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB522  ,Group Status Bit 522" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB521  ,Group Status Bit 521" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB520  ,Group Status Bit 520" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB519  ,Group Status Bit 519" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB518  ,Group Status Bit 518" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB517  ,Group Status Bit 517" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB516  ,Group Status Bit 516" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB515  ,Group Status Bit 515" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB514  ,Group Status Bit 514" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB513  ,Group Status Bit 513" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB512  ,Group Status Bit 512" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)
group.long 0x00C0++0x03
line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Non-secure access)"
bitfld.long 0x00 31. " GSB543  ,Group Status Bit 543" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB542  ,Group Status Bit 542" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB541  ,Group Status Bit 541" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB540  ,Group Status Bit 540" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB539  ,Group Status Bit 539" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB538  ,Group Status Bit 538" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB537  ,Group Status Bit 537" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB536  ,Group Status Bit 536" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB535  ,Group Status Bit 535" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB534  ,Group Status Bit 534" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB533  ,Group Status Bit 533" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB532  ,Group Status Bit 532" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB531  ,Group Status Bit 531" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB530  ,Group Status Bit 530" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB529  ,Group Status Bit 529" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB528  ,Group Status Bit 528" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB527  ,Group Status Bit 527" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB526  ,Group Status Bit 526" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB525  ,Group Status Bit 525" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB524  ,Group Status Bit 524" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB523  ,Group Status Bit 523" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB522  ,Group Status Bit 522" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB521  ,Group Status Bit 521" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB520  ,Group Status Bit 520" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB519  ,Group Status Bit 519" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB518  ,Group Status Bit 518" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB517  ,Group Status Bit 517" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB516  ,Group Status Bit 516" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB515  ,Group Status Bit 515" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB514  ,Group Status Bit 514" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB513  ,Group Status Bit 513" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB512  ,Group Status Bit 512" "Group 0,Group 1"
else
rgroup.long 0x00C0++0x03
line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00C4))
group.long 0x00C4++0x03
line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Secure access)"
bitfld.long 0x00 31. " GSB575  ,Group Status Bit 575" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB574  ,Group Status Bit 574" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB573  ,Group Status Bit 573" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB572  ,Group Status Bit 572" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB571  ,Group Status Bit 571" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB570  ,Group Status Bit 570" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB569  ,Group Status Bit 569" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB568  ,Group Status Bit 568" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB567  ,Group Status Bit 567" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB566  ,Group Status Bit 566" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB565  ,Group Status Bit 565" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB564  ,Group Status Bit 564" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB563  ,Group Status Bit 563" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB562  ,Group Status Bit 562" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB561  ,Group Status Bit 561" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB560  ,Group Status Bit 560" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB559  ,Group Status Bit 559" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB558  ,Group Status Bit 558" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB557  ,Group Status Bit 557" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB556  ,Group Status Bit 556" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB555  ,Group Status Bit 555" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB554  ,Group Status Bit 554" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB553  ,Group Status Bit 553" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB552  ,Group Status Bit 552" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB551  ,Group Status Bit 551" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB550  ,Group Status Bit 550" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB549  ,Group Status Bit 549" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB548  ,Group Status Bit 548" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB547  ,Group Status Bit 547" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB546  ,Group Status Bit 546" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB545  ,Group Status Bit 545" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB544  ,Group Status Bit 544" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)
group.long 0x00C4++0x03
line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Non-secure access)"
bitfld.long 0x00 31. " GSB575  ,Group Status Bit 575" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB574  ,Group Status Bit 574" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB573  ,Group Status Bit 573" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB572  ,Group Status Bit 572" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB571  ,Group Status Bit 571" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB570  ,Group Status Bit 570" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB569  ,Group Status Bit 569" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB568  ,Group Status Bit 568" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB567  ,Group Status Bit 567" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB566  ,Group Status Bit 566" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB565  ,Group Status Bit 565" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB564  ,Group Status Bit 564" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB563  ,Group Status Bit 563" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB562  ,Group Status Bit 562" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB561  ,Group Status Bit 561" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB560  ,Group Status Bit 560" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB559  ,Group Status Bit 559" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB558  ,Group Status Bit 558" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB557  ,Group Status Bit 557" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB556  ,Group Status Bit 556" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB555  ,Group Status Bit 555" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB554  ,Group Status Bit 554" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB553  ,Group Status Bit 553" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB552  ,Group Status Bit 552" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB551  ,Group Status Bit 551" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB550  ,Group Status Bit 550" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB549  ,Group Status Bit 549" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB548  ,Group Status Bit 548" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB547  ,Group Status Bit 547" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB546  ,Group Status Bit 546" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB545  ,Group Status Bit 545" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB544  ,Group Status Bit 544" "Group 0,Group 1"
else
rgroup.long 0x00C4++0x03
line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00C8))
group.long 0x00C8++0x03
line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Secure access)"
bitfld.long 0x00 31. " GSB607  ,Group Status Bit 607" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB606  ,Group Status Bit 606" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB605  ,Group Status Bit 605" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB604  ,Group Status Bit 604" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB603  ,Group Status Bit 603" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB602  ,Group Status Bit 602" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB601  ,Group Status Bit 601" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB600  ,Group Status Bit 600" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB599  ,Group Status Bit 599" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB598  ,Group Status Bit 598" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB597  ,Group Status Bit 597" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB596  ,Group Status Bit 596" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB595  ,Group Status Bit 595" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB594  ,Group Status Bit 594" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB593  ,Group Status Bit 593" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB592  ,Group Status Bit 592" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB591  ,Group Status Bit 591" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB590  ,Group Status Bit 590" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB589  ,Group Status Bit 589" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB588  ,Group Status Bit 588" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB587  ,Group Status Bit 587" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB586  ,Group Status Bit 586" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB585  ,Group Status Bit 585" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB584  ,Group Status Bit 584" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB583  ,Group Status Bit 583" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB582  ,Group Status Bit 582" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB581  ,Group Status Bit 581" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB580  ,Group Status Bit 580" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB579  ,Group Status Bit 579" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB578  ,Group Status Bit 578" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB577  ,Group Status Bit 577" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB576  ,Group Status Bit 576" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)
group.long 0x00C8++0x03
line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Non-secure access)"
bitfld.long 0x00 31. " GSB607  ,Group Status Bit 607" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB606  ,Group Status Bit 606" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB605  ,Group Status Bit 605" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB604  ,Group Status Bit 604" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB603  ,Group Status Bit 603" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB602  ,Group Status Bit 602" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB601  ,Group Status Bit 601" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB600  ,Group Status Bit 600" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB599  ,Group Status Bit 599" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB598  ,Group Status Bit 598" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB597  ,Group Status Bit 597" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB596  ,Group Status Bit 596" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB595  ,Group Status Bit 595" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB594  ,Group Status Bit 594" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB593  ,Group Status Bit 593" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB592  ,Group Status Bit 592" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB591  ,Group Status Bit 591" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB590  ,Group Status Bit 590" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB589  ,Group Status Bit 589" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB588  ,Group Status Bit 588" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB587  ,Group Status Bit 587" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB586  ,Group Status Bit 586" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB585  ,Group Status Bit 585" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB584  ,Group Status Bit 584" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB583  ,Group Status Bit 583" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB582  ,Group Status Bit 582" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB581  ,Group Status Bit 581" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB580  ,Group Status Bit 580" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB579  ,Group Status Bit 579" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB578  ,Group Status Bit 578" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB577  ,Group Status Bit 577" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB576  ,Group Status Bit 576" "Group 0,Group 1"
else
rgroup.long 0x00C8++0x03
line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00CC))
group.long 0x00CC++0x03
line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Secure access)"
bitfld.long 0x00 31. " GSB639  ,Group Status Bit 639" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB638  ,Group Status Bit 638" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB637  ,Group Status Bit 637" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB636  ,Group Status Bit 636" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB635  ,Group Status Bit 635" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB634  ,Group Status Bit 634" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB633  ,Group Status Bit 633" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB632  ,Group Status Bit 632" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB631  ,Group Status Bit 631" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB630  ,Group Status Bit 630" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB629  ,Group Status Bit 629" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB628  ,Group Status Bit 628" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB627  ,Group Status Bit 627" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB626  ,Group Status Bit 626" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB625  ,Group Status Bit 625" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB624  ,Group Status Bit 624" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB623  ,Group Status Bit 623" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB622  ,Group Status Bit 622" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB621  ,Group Status Bit 621" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB620  ,Group Status Bit 620" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB619  ,Group Status Bit 619" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB618  ,Group Status Bit 618" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB617  ,Group Status Bit 617" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB616  ,Group Status Bit 616" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB615  ,Group Status Bit 615" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB614  ,Group Status Bit 614" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB613  ,Group Status Bit 613" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB612  ,Group Status Bit 612" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB611  ,Group Status Bit 611" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB610  ,Group Status Bit 610" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB609  ,Group Status Bit 609" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB608  ,Group Status Bit 608" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)
group.long 0x00CC++0x03
line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Non-secure access)"
bitfld.long 0x00 31. " GSB639  ,Group Status Bit 639" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB638  ,Group Status Bit 638" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB637  ,Group Status Bit 637" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB636  ,Group Status Bit 636" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB635  ,Group Status Bit 635" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB634  ,Group Status Bit 634" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB633  ,Group Status Bit 633" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB632  ,Group Status Bit 632" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB631  ,Group Status Bit 631" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB630  ,Group Status Bit 630" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB629  ,Group Status Bit 629" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB628  ,Group Status Bit 628" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB627  ,Group Status Bit 627" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB626  ,Group Status Bit 626" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB625  ,Group Status Bit 625" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB624  ,Group Status Bit 624" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB623  ,Group Status Bit 623" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB622  ,Group Status Bit 622" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB621  ,Group Status Bit 621" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB620  ,Group Status Bit 620" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB619  ,Group Status Bit 619" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB618  ,Group Status Bit 618" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB617  ,Group Status Bit 617" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB616  ,Group Status Bit 616" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB615  ,Group Status Bit 615" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB614  ,Group Status Bit 614" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB613  ,Group Status Bit 613" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB612  ,Group Status Bit 612" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB611  ,Group Status Bit 611" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB610  ,Group Status Bit 610" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB609  ,Group Status Bit 609" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB608  ,Group Status Bit 608" "Group 0,Group 1"
else
rgroup.long 0x00CC++0x03
line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00D0))
group.long 0x00D0++0x03
line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Secure access)"
bitfld.long 0x00 31. " GSB671  ,Group Status Bit 671" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB670  ,Group Status Bit 670" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB669  ,Group Status Bit 669" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB668  ,Group Status Bit 668" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB667  ,Group Status Bit 667" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB666  ,Group Status Bit 666" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB665  ,Group Status Bit 665" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB664  ,Group Status Bit 664" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB663  ,Group Status Bit 663" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB662  ,Group Status Bit 662" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB661  ,Group Status Bit 661" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB660  ,Group Status Bit 660" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB659  ,Group Status Bit 659" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB658  ,Group Status Bit 658" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB657  ,Group Status Bit 657" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB656  ,Group Status Bit 656" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB655  ,Group Status Bit 655" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB654  ,Group Status Bit 654" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB653  ,Group Status Bit 653" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB652  ,Group Status Bit 652" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB651  ,Group Status Bit 651" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB650  ,Group Status Bit 650" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB649  ,Group Status Bit 649" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB648  ,Group Status Bit 648" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB647  ,Group Status Bit 647" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB646  ,Group Status Bit 646" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB645  ,Group Status Bit 645" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB644  ,Group Status Bit 644" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB643  ,Group Status Bit 643" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB642  ,Group Status Bit 642" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB641  ,Group Status Bit 641" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB640  ,Group Status Bit 640" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)
group.long 0x00D0++0x03
line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Non-secure access)"
bitfld.long 0x00 31. " GSB671  ,Group Status Bit 671" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB670  ,Group Status Bit 670" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB669  ,Group Status Bit 669" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB668  ,Group Status Bit 668" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB667  ,Group Status Bit 667" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB666  ,Group Status Bit 666" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB665  ,Group Status Bit 665" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB664  ,Group Status Bit 664" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB663  ,Group Status Bit 663" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB662  ,Group Status Bit 662" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB661  ,Group Status Bit 661" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB660  ,Group Status Bit 660" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB659  ,Group Status Bit 659" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB658  ,Group Status Bit 658" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB657  ,Group Status Bit 657" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB656  ,Group Status Bit 656" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB655  ,Group Status Bit 655" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB654  ,Group Status Bit 654" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB653  ,Group Status Bit 653" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB652  ,Group Status Bit 652" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB651  ,Group Status Bit 651" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB650  ,Group Status Bit 650" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB649  ,Group Status Bit 649" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB648  ,Group Status Bit 648" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB647  ,Group Status Bit 647" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB646  ,Group Status Bit 646" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB645  ,Group Status Bit 645" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB644  ,Group Status Bit 644" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB643  ,Group Status Bit 643" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB642  ,Group Status Bit 642" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB641  ,Group Status Bit 641" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB640  ,Group Status Bit 640" "Group 0,Group 1"
else
rgroup.long 0x00D0++0x03
line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00D4))
group.long 0x00D4++0x03
line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Secure access)"
bitfld.long 0x00 31. " GSB703  ,Group Status Bit 703" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB702  ,Group Status Bit 702" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB701  ,Group Status Bit 701" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB700  ,Group Status Bit 700" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB699  ,Group Status Bit 699" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB698  ,Group Status Bit 698" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB697  ,Group Status Bit 697" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB696  ,Group Status Bit 696" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB695  ,Group Status Bit 695" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB694  ,Group Status Bit 694" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB693  ,Group Status Bit 693" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB692  ,Group Status Bit 692" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB691  ,Group Status Bit 691" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB690  ,Group Status Bit 690" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB689  ,Group Status Bit 689" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB688  ,Group Status Bit 688" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB687  ,Group Status Bit 687" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB686  ,Group Status Bit 686" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB685  ,Group Status Bit 685" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB684  ,Group Status Bit 684" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB683  ,Group Status Bit 683" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB682  ,Group Status Bit 682" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB681  ,Group Status Bit 681" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB680  ,Group Status Bit 680" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB679  ,Group Status Bit 679" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB678  ,Group Status Bit 678" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB677  ,Group Status Bit 677" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB676  ,Group Status Bit 676" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB675  ,Group Status Bit 675" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB674  ,Group Status Bit 674" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB673  ,Group Status Bit 673" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB672  ,Group Status Bit 672" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)
group.long 0x00D4++0x03
line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Non-secure access)"
bitfld.long 0x00 31. " GSB703  ,Group Status Bit 703" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB702  ,Group Status Bit 702" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB701  ,Group Status Bit 701" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB700  ,Group Status Bit 700" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB699  ,Group Status Bit 699" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB698  ,Group Status Bit 698" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB697  ,Group Status Bit 697" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB696  ,Group Status Bit 696" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB695  ,Group Status Bit 695" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB694  ,Group Status Bit 694" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB693  ,Group Status Bit 693" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB692  ,Group Status Bit 692" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB691  ,Group Status Bit 691" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB690  ,Group Status Bit 690" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB689  ,Group Status Bit 689" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB688  ,Group Status Bit 688" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB687  ,Group Status Bit 687" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB686  ,Group Status Bit 686" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB685  ,Group Status Bit 685" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB684  ,Group Status Bit 684" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB683  ,Group Status Bit 683" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB682  ,Group Status Bit 682" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB681  ,Group Status Bit 681" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB680  ,Group Status Bit 680" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB679  ,Group Status Bit 679" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB678  ,Group Status Bit 678" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB677  ,Group Status Bit 677" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB676  ,Group Status Bit 676" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB675  ,Group Status Bit 675" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB674  ,Group Status Bit 674" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB673  ,Group Status Bit 673" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB672  ,Group Status Bit 672" "Group 0,Group 1"
else
rgroup.long 0x00D4++0x03
line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00D8))
group.long 0x00D8++0x03
line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Secure access)"
bitfld.long 0x00 31. " GSB735  ,Group Status Bit 735" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB734  ,Group Status Bit 734" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB733  ,Group Status Bit 733" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB732  ,Group Status Bit 732" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB731  ,Group Status Bit 731" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB730  ,Group Status Bit 730" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB729  ,Group Status Bit 729" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB728  ,Group Status Bit 728" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB727  ,Group Status Bit 727" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB726  ,Group Status Bit 726" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB725  ,Group Status Bit 725" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB724  ,Group Status Bit 724" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB723  ,Group Status Bit 723" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB722  ,Group Status Bit 722" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB721  ,Group Status Bit 721" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB720  ,Group Status Bit 720" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB719  ,Group Status Bit 719" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB718  ,Group Status Bit 718" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB717  ,Group Status Bit 717" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB716  ,Group Status Bit 716" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB715  ,Group Status Bit 715" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB714  ,Group Status Bit 714" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB713  ,Group Status Bit 713" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB712  ,Group Status Bit 712" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB711  ,Group Status Bit 711" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB710  ,Group Status Bit 710" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB709  ,Group Status Bit 709" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB708  ,Group Status Bit 708" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB707  ,Group Status Bit 707" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB706  ,Group Status Bit 706" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB705  ,Group Status Bit 705" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB704  ,Group Status Bit 704" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)
group.long 0x00D8++0x03
line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Non-secure access)"
bitfld.long 0x00 31. " GSB735  ,Group Status Bit 735" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB734  ,Group Status Bit 734" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB733  ,Group Status Bit 733" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB732  ,Group Status Bit 732" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB731  ,Group Status Bit 731" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB730  ,Group Status Bit 730" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB729  ,Group Status Bit 729" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB728  ,Group Status Bit 728" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB727  ,Group Status Bit 727" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB726  ,Group Status Bit 726" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB725  ,Group Status Bit 725" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB724  ,Group Status Bit 724" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB723  ,Group Status Bit 723" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB722  ,Group Status Bit 722" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB721  ,Group Status Bit 721" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB720  ,Group Status Bit 720" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB719  ,Group Status Bit 719" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB718  ,Group Status Bit 718" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB717  ,Group Status Bit 717" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB716  ,Group Status Bit 716" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB715  ,Group Status Bit 715" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB714  ,Group Status Bit 714" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB713  ,Group Status Bit 713" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB712  ,Group Status Bit 712" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB711  ,Group Status Bit 711" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB710  ,Group Status Bit 710" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB709  ,Group Status Bit 709" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB708  ,Group Status Bit 708" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB707  ,Group Status Bit 707" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB706  ,Group Status Bit 706" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB705  ,Group Status Bit 705" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB704  ,Group Status Bit 704" "Group 0,Group 1"
else
rgroup.long 0x00D8++0x03
line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00DC))
group.long 0x00DC++0x03
line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Secure access)"
bitfld.long 0x00 31. " GSB767  ,Group Status Bit 767" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB766  ,Group Status Bit 766" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB765  ,Group Status Bit 765" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB764  ,Group Status Bit 764" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB763  ,Group Status Bit 763" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB762  ,Group Status Bit 762" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB761  ,Group Status Bit 761" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB760  ,Group Status Bit 760" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB759  ,Group Status Bit 759" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB758  ,Group Status Bit 758" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB757  ,Group Status Bit 757" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB756  ,Group Status Bit 756" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB755  ,Group Status Bit 755" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB754  ,Group Status Bit 754" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB753  ,Group Status Bit 753" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB752  ,Group Status Bit 752" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB751  ,Group Status Bit 751" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB750  ,Group Status Bit 750" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB749  ,Group Status Bit 749" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB748  ,Group Status Bit 748" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB747  ,Group Status Bit 747" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB746  ,Group Status Bit 746" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB745  ,Group Status Bit 745" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB744  ,Group Status Bit 744" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB743  ,Group Status Bit 743" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB742  ,Group Status Bit 742" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB741  ,Group Status Bit 741" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB740  ,Group Status Bit 740" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB739  ,Group Status Bit 739" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB738  ,Group Status Bit 738" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB737  ,Group Status Bit 737" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB736  ,Group Status Bit 736" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)
group.long 0x00DC++0x03
line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Non-secure access)"
bitfld.long 0x00 31. " GSB767  ,Group Status Bit 767" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB766  ,Group Status Bit 766" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB765  ,Group Status Bit 765" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB764  ,Group Status Bit 764" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB763  ,Group Status Bit 763" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB762  ,Group Status Bit 762" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB761  ,Group Status Bit 761" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB760  ,Group Status Bit 760" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB759  ,Group Status Bit 759" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB758  ,Group Status Bit 758" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB757  ,Group Status Bit 757" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB756  ,Group Status Bit 756" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB755  ,Group Status Bit 755" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB754  ,Group Status Bit 754" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB753  ,Group Status Bit 753" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB752  ,Group Status Bit 752" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB751  ,Group Status Bit 751" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB750  ,Group Status Bit 750" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB749  ,Group Status Bit 749" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB748  ,Group Status Bit 748" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB747  ,Group Status Bit 747" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB746  ,Group Status Bit 746" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB745  ,Group Status Bit 745" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB744  ,Group Status Bit 744" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB743  ,Group Status Bit 743" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB742  ,Group Status Bit 742" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB741  ,Group Status Bit 741" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB740  ,Group Status Bit 740" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB739  ,Group Status Bit 739" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB738  ,Group Status Bit 738" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB737  ,Group Status Bit 737" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB736  ,Group Status Bit 736" "Group 0,Group 1"
else
rgroup.long 0x00DC++0x03
line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00E0))
group.long 0x00E0++0x03
line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Secure access)"
bitfld.long 0x00 31. " GSB799  ,Group Status Bit 799" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB798  ,Group Status Bit 798" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB797  ,Group Status Bit 797" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB796  ,Group Status Bit 796" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB795  ,Group Status Bit 795" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB794  ,Group Status Bit 794" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB793  ,Group Status Bit 793" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB792  ,Group Status Bit 792" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB791  ,Group Status Bit 791" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB790  ,Group Status Bit 790" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB789  ,Group Status Bit 789" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB788  ,Group Status Bit 788" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB787  ,Group Status Bit 787" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB786  ,Group Status Bit 786" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB785  ,Group Status Bit 785" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB784  ,Group Status Bit 784" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB783  ,Group Status Bit 783" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB782  ,Group Status Bit 782" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB781  ,Group Status Bit 781" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB780  ,Group Status Bit 780" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB779  ,Group Status Bit 779" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB778  ,Group Status Bit 778" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB777  ,Group Status Bit 777" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB776  ,Group Status Bit 776" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB775  ,Group Status Bit 775" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB774  ,Group Status Bit 774" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB773  ,Group Status Bit 773" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB772  ,Group Status Bit 772" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB771  ,Group Status Bit 771" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB770  ,Group Status Bit 770" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB769  ,Group Status Bit 769" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB768  ,Group Status Bit 768" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)
group.long 0x00E0++0x03
line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Non-secure access)"
bitfld.long 0x00 31. " GSB799  ,Group Status Bit 799" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB798  ,Group Status Bit 798" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB797  ,Group Status Bit 797" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB796  ,Group Status Bit 796" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB795  ,Group Status Bit 795" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB794  ,Group Status Bit 794" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB793  ,Group Status Bit 793" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB792  ,Group Status Bit 792" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB791  ,Group Status Bit 791" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB790  ,Group Status Bit 790" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB789  ,Group Status Bit 789" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB788  ,Group Status Bit 788" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB787  ,Group Status Bit 787" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB786  ,Group Status Bit 786" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB785  ,Group Status Bit 785" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB784  ,Group Status Bit 784" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB783  ,Group Status Bit 783" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB782  ,Group Status Bit 782" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB781  ,Group Status Bit 781" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB780  ,Group Status Bit 780" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB779  ,Group Status Bit 779" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB778  ,Group Status Bit 778" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB777  ,Group Status Bit 777" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB776  ,Group Status Bit 776" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB775  ,Group Status Bit 775" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB774  ,Group Status Bit 774" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB773  ,Group Status Bit 773" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB772  ,Group Status Bit 772" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB771  ,Group Status Bit 771" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB770  ,Group Status Bit 770" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB769  ,Group Status Bit 769" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB768  ,Group Status Bit 768" "Group 0,Group 1"
else
rgroup.long 0x0E0++0x03
line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00E4))
group.long 0x00E4++0x03
line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Secure access)"
bitfld.long 0x00 31. " GSB831  ,Group Status Bit 831" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB830  ,Group Status Bit 830" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB829  ,Group Status Bit 829" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB828  ,Group Status Bit 828" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB827  ,Group Status Bit 827" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB826  ,Group Status Bit 826" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB825  ,Group Status Bit 825" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB824  ,Group Status Bit 824" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB823  ,Group Status Bit 823" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB822  ,Group Status Bit 822" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB821  ,Group Status Bit 821" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB820  ,Group Status Bit 820" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB819  ,Group Status Bit 819" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB818  ,Group Status Bit 818" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB817  ,Group Status Bit 817" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB816  ,Group Status Bit 816" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB815  ,Group Status Bit 815" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB814  ,Group Status Bit 814" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB813  ,Group Status Bit 813" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB812  ,Group Status Bit 812" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB811  ,Group Status Bit 811" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB810  ,Group Status Bit 810" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB809  ,Group Status Bit 809" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB808  ,Group Status Bit 808" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB807  ,Group Status Bit 807" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB806  ,Group Status Bit 806" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB805  ,Group Status Bit 805" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB804  ,Group Status Bit 804" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB803  ,Group Status Bit 803" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB802  ,Group Status Bit 802" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB801  ,Group Status Bit 801" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB800  ,Group Status Bit 800" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)
group.long 0x00E4++0x03
line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Non-secure access)"
bitfld.long 0x00 31. " GSB831  ,Group Status Bit 831" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB830  ,Group Status Bit 830" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB829  ,Group Status Bit 829" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB828  ,Group Status Bit 828" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB827  ,Group Status Bit 827" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB826  ,Group Status Bit 826" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB825  ,Group Status Bit 825" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB824  ,Group Status Bit 824" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB823  ,Group Status Bit 823" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB822  ,Group Status Bit 822" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB821  ,Group Status Bit 821" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB820  ,Group Status Bit 820" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB819  ,Group Status Bit 819" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB818  ,Group Status Bit 818" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB817  ,Group Status Bit 817" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB816  ,Group Status Bit 816" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB815  ,Group Status Bit 815" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB814  ,Group Status Bit 814" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB813  ,Group Status Bit 813" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB812  ,Group Status Bit 812" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB811  ,Group Status Bit 811" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB810  ,Group Status Bit 810" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB809  ,Group Status Bit 809" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB808  ,Group Status Bit 808" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB807  ,Group Status Bit 807" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB806  ,Group Status Bit 806" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB805  ,Group Status Bit 805" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB804  ,Group Status Bit 804" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB803  ,Group Status Bit 803" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB802  ,Group Status Bit 802" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB801  ,Group Status Bit 801" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB800  ,Group Status Bit 800" "Group 0,Group 1"
else
rgroup.long 0x00E4++0x03
line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00E8))
group.long 0x00E8++0x03
line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Secure access)"
bitfld.long 0x00 31. " GSB863  ,Group Status Bit 863" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB862  ,Group Status Bit 862" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB861  ,Group Status Bit 861" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB860  ,Group Status Bit 860" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB859  ,Group Status Bit 859" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB858  ,Group Status Bit 858" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB857  ,Group Status Bit 857" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB856  ,Group Status Bit 856" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB855  ,Group Status Bit 855" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB854  ,Group Status Bit 854" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB853  ,Group Status Bit 853" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB852  ,Group Status Bit 852" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB851  ,Group Status Bit 851" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB850  ,Group Status Bit 850" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB849  ,Group Status Bit 849" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB848  ,Group Status Bit 848" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB847  ,Group Status Bit 847" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB846  ,Group Status Bit 846" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB845  ,Group Status Bit 845" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB844  ,Group Status Bit 844" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB843  ,Group Status Bit 843" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB842  ,Group Status Bit 842" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB841  ,Group Status Bit 841" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB840  ,Group Status Bit 840" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB839  ,Group Status Bit 839" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB838  ,Group Status Bit 838" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB837  ,Group Status Bit 837" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB836  ,Group Status Bit 836" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB835  ,Group Status Bit 835" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB834  ,Group Status Bit 834" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB833  ,Group Status Bit 833" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB832  ,Group Status Bit 832" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)
group.long 0x00E8++0x03
line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Non-secure access)"
bitfld.long 0x00 31. " GSB863  ,Group Status Bit 863" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB862  ,Group Status Bit 862" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB861  ,Group Status Bit 861" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB860  ,Group Status Bit 860" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB859  ,Group Status Bit 859" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB858  ,Group Status Bit 858" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB857  ,Group Status Bit 857" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB856  ,Group Status Bit 856" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB855  ,Group Status Bit 855" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB854  ,Group Status Bit 854" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB853  ,Group Status Bit 853" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB852  ,Group Status Bit 852" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB851  ,Group Status Bit 851" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB850  ,Group Status Bit 850" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB849  ,Group Status Bit 849" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB848  ,Group Status Bit 848" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB847  ,Group Status Bit 847" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB846  ,Group Status Bit 846" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB845  ,Group Status Bit 845" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB844  ,Group Status Bit 844" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB843  ,Group Status Bit 843" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB842  ,Group Status Bit 842" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB841  ,Group Status Bit 841" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB840  ,Group Status Bit 840" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB839  ,Group Status Bit 839" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB838  ,Group Status Bit 838" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB837  ,Group Status Bit 837" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB836  ,Group Status Bit 836" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB835  ,Group Status Bit 835" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB834  ,Group Status Bit 834" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB833  ,Group Status Bit 833" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB832  ,Group Status Bit 832" "Group 0,Group 1"
else
rgroup.long 0x00E8++0x03
line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00EC))
group.long 0x00EC++0x03
line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Secure access)"
bitfld.long 0x00 31. " GSB895  ,Group Status Bit 895" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB894  ,Group Status Bit 894" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB893  ,Group Status Bit 893" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB892  ,Group Status Bit 892" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB891  ,Group Status Bit 891" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB890  ,Group Status Bit 890" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB889  ,Group Status Bit 889" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB888  ,Group Status Bit 888" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB887  ,Group Status Bit 887" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB886  ,Group Status Bit 886" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB885  ,Group Status Bit 885" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB884  ,Group Status Bit 884" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB883  ,Group Status Bit 883" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB882  ,Group Status Bit 882" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB881  ,Group Status Bit 881" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB880  ,Group Status Bit 880" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB879  ,Group Status Bit 879" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB878  ,Group Status Bit 878" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB877  ,Group Status Bit 877" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB876  ,Group Status Bit 876" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB875  ,Group Status Bit 875" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB874  ,Group Status Bit 874" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB873  ,Group Status Bit 873" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB872  ,Group Status Bit 872" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB871  ,Group Status Bit 871" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB870  ,Group Status Bit 870" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB869  ,Group Status Bit 869" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB868  ,Group Status Bit 868" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB867  ,Group Status Bit 867" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB866  ,Group Status Bit 866" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB865  ,Group Status Bit 865" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB864  ,Group Status Bit 864" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)
group.long 0x00EC++0x03
line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Non-Secure access)"
bitfld.long 0x00 31. " GSB895  ,Group Status Bit 895" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB894  ,Group Status Bit 894" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB893  ,Group Status Bit 893" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB892  ,Group Status Bit 892" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB891  ,Group Status Bit 891" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB890  ,Group Status Bit 890" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB889  ,Group Status Bit 889" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB888  ,Group Status Bit 888" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB887  ,Group Status Bit 887" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB886  ,Group Status Bit 886" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB885  ,Group Status Bit 885" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB884  ,Group Status Bit 884" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB883  ,Group Status Bit 883" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB882  ,Group Status Bit 882" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB881  ,Group Status Bit 881" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB880  ,Group Status Bit 880" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB879  ,Group Status Bit 879" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB878  ,Group Status Bit 878" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB877  ,Group Status Bit 877" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB876  ,Group Status Bit 876" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB875  ,Group Status Bit 875" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB874  ,Group Status Bit 874" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB873  ,Group Status Bit 873" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB872  ,Group Status Bit 872" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB871  ,Group Status Bit 871" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB870  ,Group Status Bit 870" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB869  ,Group Status Bit 869" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB868  ,Group Status Bit 868" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB867  ,Group Status Bit 867" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB866  ,Group Status Bit 866" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB865  ,Group Status Bit 865" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB864  ,Group Status Bit 864" "Group 0,Group 1"
else
rgroup.long 0x00EC++0x03
line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00F0))
group.long 0x00F0++0x03
line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Secure access)"
bitfld.long 0x00 31. " GSB927  ,Group Status Bit 927" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB926  ,Group Status Bit 926" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB925  ,Group Status Bit 925" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB924  ,Group Status Bit 924" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB923  ,Group Status Bit 923" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB922  ,Group Status Bit 922" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB921  ,Group Status Bit 921" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB920  ,Group Status Bit 920" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB919  ,Group Status Bit 919" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB918  ,Group Status Bit 918" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB917  ,Group Status Bit 917" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB916  ,Group Status Bit 916" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB915  ,Group Status Bit 915" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB914  ,Group Status Bit 914" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB913  ,Group Status Bit 913" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB912  ,Group Status Bit 912" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB911  ,Group Status Bit 911" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB910  ,Group Status Bit 910" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB909  ,Group Status Bit 909" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB908  ,Group Status Bit 908" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB907  ,Group Status Bit 907" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB906  ,Group Status Bit 906" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB905  ,Group Status Bit 905" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB904  ,Group Status Bit 904" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB903  ,Group Status Bit 903" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB902  ,Group Status Bit 902" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB901  ,Group Status Bit 901" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB900  ,Group Status Bit 900" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB899  ,Group Status Bit 899" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB898  ,Group Status Bit 898" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB897  ,Group Status Bit 897" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB896  ,Group Status Bit 896" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)
group.long 0x00F0++0x03
line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Non-secure access)"
bitfld.long 0x00 31. " GSB927  ,Group Status Bit 927" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB926  ,Group Status Bit 926" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB925  ,Group Status Bit 925" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB924  ,Group Status Bit 924" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB923  ,Group Status Bit 923" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB922  ,Group Status Bit 922" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB921  ,Group Status Bit 921" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB920  ,Group Status Bit 920" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB919  ,Group Status Bit 919" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB918  ,Group Status Bit 918" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB917  ,Group Status Bit 917" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB916  ,Group Status Bit 916" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB915  ,Group Status Bit 915" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB914  ,Group Status Bit 914" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB913  ,Group Status Bit 913" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB912  ,Group Status Bit 912" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB911  ,Group Status Bit 911" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB910  ,Group Status Bit 910" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB909  ,Group Status Bit 909" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB908  ,Group Status Bit 908" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB907  ,Group Status Bit 907" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB906  ,Group Status Bit 906" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB905  ,Group Status Bit 905" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB904  ,Group Status Bit 904" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB903  ,Group Status Bit 903" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB902  ,Group Status Bit 902" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB901  ,Group Status Bit 901" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB900  ,Group Status Bit 900" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB899  ,Group Status Bit 899" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB898  ,Group Status Bit 898" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB897  ,Group Status Bit 897" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB896  ,Group Status Bit 896" "Group 0,Group 1"
else
rgroup.long 0x0F0++0x03
line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00F4))
group.long 0x00F4++0x03
line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Secure access)"
bitfld.long 0x00 31. " GSB959  ,Group Status Bit 959" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB958  ,Group Status Bit 958" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB957  ,Group Status Bit 957" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB956  ,Group Status Bit 956" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB955  ,Group Status Bit 955" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB954  ,Group Status Bit 954" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB953  ,Group Status Bit 953" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB952  ,Group Status Bit 952" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB951  ,Group Status Bit 951" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB950  ,Group Status Bit 950" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB949  ,Group Status Bit 949" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB948  ,Group Status Bit 948" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB947  ,Group Status Bit 947" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB946  ,Group Status Bit 946" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB945  ,Group Status Bit 945" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB944  ,Group Status Bit 944" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB943  ,Group Status Bit 943" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB942  ,Group Status Bit 942" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB941  ,Group Status Bit 941" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB940  ,Group Status Bit 940" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB939  ,Group Status Bit 939" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB938  ,Group Status Bit 938" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB937  ,Group Status Bit 937" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB936  ,Group Status Bit 936" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB935  ,Group Status Bit 935" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB934  ,Group Status Bit 934" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB933  ,Group Status Bit 933" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB932  ,Group Status Bit 932" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB931  ,Group Status Bit 931" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB930  ,Group Status Bit 930" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB929  ,Group Status Bit 929" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB928  ,Group Status Bit 928" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)
group.long 0x00F4++0x03
line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Non-secure access)"
bitfld.long 0x00 31. " GSB959  ,Group Status Bit 959" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB958  ,Group Status Bit 958" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB957  ,Group Status Bit 957" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB956  ,Group Status Bit 956" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB955  ,Group Status Bit 955" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB954  ,Group Status Bit 954" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB953  ,Group Status Bit 953" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB952  ,Group Status Bit 952" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB951  ,Group Status Bit 951" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB950  ,Group Status Bit 950" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB949  ,Group Status Bit 949" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB948  ,Group Status Bit 948" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB947  ,Group Status Bit 947" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB946  ,Group Status Bit 946" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB945  ,Group Status Bit 945" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB944  ,Group Status Bit 944" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB943  ,Group Status Bit 943" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB942  ,Group Status Bit 942" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB941  ,Group Status Bit 941" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB940  ,Group Status Bit 940" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB939  ,Group Status Bit 939" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB938  ,Group Status Bit 938" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB937  ,Group Status Bit 937" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB936  ,Group Status Bit 936" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB935  ,Group Status Bit 935" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB934  ,Group Status Bit 934" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB933  ,Group Status Bit 933" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB932  ,Group Status Bit 932" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB931  ,Group Status Bit 931" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB930  ,Group Status Bit 930" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB929  ,Group Status Bit 929" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB928  ,Group Status Bit 928" "Group 0,Group 1"
else
rgroup.long 0x00F4++0x03
line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00F8))
group.long 0x00F8++0x03
line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Secure access)"
bitfld.long 0x00 31. " GSB991  ,Group Status Bit 991" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 30. "  GSB990  ,Group Status Bit 990" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 29. "  GSB989  ,Group Status Bit 989" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 28. " GSB988  ,Group Status Bit 988" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 27. "  GSB987  ,Group Status Bit 987" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB986  ,Group Status Bit 986" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB985  ,Group Status Bit 985" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB984  ,Group Status Bit 984" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB983  ,Group Status Bit 983" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB982  ,Group Status Bit 982" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB981  ,Group Status Bit 981" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB980  ,Group Status Bit 980" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB979  ,Group Status Bit 979" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB978  ,Group Status Bit 978" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB977  ,Group Status Bit 977" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB976  ,Group Status Bit 976" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB975  ,Group Status Bit 975" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB974  ,Group Status Bit 974" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB973  ,Group Status Bit 973" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB972  ,Group Status Bit 972" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB971  ,Group Status Bit 971" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB970  ,Group Status Bit 970" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB969  ,Group Status Bit 969" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB968  ,Group Status Bit 968" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB967  ,Group Status Bit 967" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB966  ,Group Status Bit 966" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB965  ,Group Status Bit 965" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB964  ,Group Status Bit 964" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB963  ,Group Status Bit 963" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB962  ,Group Status Bit 962" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB961  ,Group Status Bit 961" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB960  ,Group Status Bit 960" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)
group.long 0x00F8++0x03
line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Non-secure access)"
bitfld.long 0x00 31. " GSB991  ,Group Status Bit 991" "Group 0,Group 1"
bitfld.long 0x00 30. "  GSB990  ,Group Status Bit 990" "Group 0,Group 1"
bitfld.long 0x00 29. "  GSB989  ,Group Status Bit 989" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB988  ,Group Status Bit 988" "Group 0,Group 1"
bitfld.long 0x00 27. "  GSB987  ,Group Status Bit 987" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB986  ,Group Status Bit 986" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB985  ,Group Status Bit 985" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB984  ,Group Status Bit 984" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB983  ,Group Status Bit 983" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB982  ,Group Status Bit 982" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB981  ,Group Status Bit 981" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB980  ,Group Status Bit 980" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB979  ,Group Status Bit 979" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB978  ,Group Status Bit 978" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB977  ,Group Status Bit 977" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB976  ,Group Status Bit 976" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB975  ,Group Status Bit 975" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB974  ,Group Status Bit 974" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB973  ,Group Status Bit 973" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB972  ,Group Status Bit 972" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB971  ,Group Status Bit 971" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB970  ,Group Status Bit 970" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB969  ,Group Status Bit 969" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB968  ,Group Status Bit 968" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB967  ,Group Status Bit 967" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB966  ,Group Status Bit 966" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB965  ,Group Status Bit 965" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB964  ,Group Status Bit 964" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB963  ,Group Status Bit 963" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB962  ,Group Status Bit 962" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB961  ,Group Status Bit 961" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB960  ,Group Status Bit 960" "Group 0,Group 1"
else
rgroup.long 0x00F8++0x03
line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)==0x1F)&&(PER.ADDRESS.isSECUREEX(ad:0xFFFC1000+0x00FC))
group.long 0x00FC++0x03
line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31 (Secure access)"
bitfld.long 0x00 27. " GSB1019 ,Group Status Bit 1019" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 26. "  GSB1018 ,Group Status Bit 1018" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 25. " GSB1017 ,Group Status Bit 1017" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 24. "  GSB1016 ,Group Status Bit 1016" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 23. "  GSB1015 ,Group Status Bit 1015" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 22. " GSB1014 ,Group Status Bit 1014" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 21. "  GSB1013 ,Group Status Bit 1013" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 20. "  GSB1012 ,Group Status Bit 1012" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 19. " GSB1011 ,Group Status Bit 1011" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 18. "  GSB1010 ,Group Status Bit 1010" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 17. "  GSB1009 ,Group Status Bit 1009" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 16. " GSB1008 ,Group Status Bit 1008" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 15. "  GSB1007 ,Group Status Bit 1007" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 14. "  GSB1006 ,Group Status Bit 1006" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 13. " GSB1005 ,Group Status Bit 1005" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 12. "  GSB1004 ,Group Status Bit 1004" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 11. "  GSB1003 ,Group Status Bit 1003" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 10. " GSB1002 ,Group Status Bit 1002" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 9. "  GSB1001 ,Group Status Bit 1001" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 8. "  GSB1000 ,Group Status Bit 1000" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 7. " GSB999  ,Group Status Bit 999" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 6. "  GSB998  ,Group Status Bit 998" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 5. "  GSB997  ,Group Status Bit 997" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 4. " GSB996  ,Group Status Bit 996" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 3. "  GSB995  ,Group Status Bit 995" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 2. "  GSB994  ,Group Status Bit 994" "Group 0 (Secure),Group 1 (Non-secure)"
textline "                          "
bitfld.long 0x00 1. " GSB993  ,Group Status Bit 993" "Group 0 (Secure),Group 1 (Non-secure)"
bitfld.long 0x00 0. "  GSB992  ,Group Status Bit 992" "Group 0 (Secure),Group 1 (Non-secure)"
elif (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)==0x1F)
group.long 0x00FC++0x03
line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31 (Non-secure access)"
bitfld.long 0x00 27. " GSB1019 ,Group Status Bit 1019" "Group 0,Group 1"
bitfld.long 0x00 26. "  GSB1018 ,Group Status Bit 1018" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB1017 ,Group Status Bit 1017" "Group 0,Group 1"
bitfld.long 0x00 24. "  GSB1016 ,Group Status Bit 1016" "Group 0,Group 1"
bitfld.long 0x00 23. "  GSB1015 ,Group Status Bit 1015" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB1014 ,Group Status Bit 1014" "Group 0,Group 1"
bitfld.long 0x00 21. "  GSB1013 ,Group Status Bit 1013" "Group 0,Group 1"
bitfld.long 0x00 20. "  GSB1012 ,Group Status Bit 1012" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB1011 ,Group Status Bit 1011" "Group 0,Group 1"
bitfld.long 0x00 18. "  GSB1010 ,Group Status Bit 1010" "Group 0,Group 1"
bitfld.long 0x00 17. "  GSB1009 ,Group Status Bit 1009" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB1008 ,Group Status Bit 1008" "Group 0,Group 1"
bitfld.long 0x00 15. "  GSB1007 ,Group Status Bit 1007" "Group 0,Group 1"
bitfld.long 0x00 14. "  GSB1006 ,Group Status Bit 1006" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB1005 ,Group Status Bit 1005" "Group 0,Group 1"
bitfld.long 0x00 12. "  GSB1004 ,Group Status Bit 1004" "Group 0,Group 1"
bitfld.long 0x00 11. "  GSB1003 ,Group Status Bit 1003" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB1002 ,Group Status Bit 1002" "Group 0,Group 1"
bitfld.long 0x00 9. "  GSB1001 ,Group Status Bit 1001" "Group 0,Group 1"
bitfld.long 0x00 8. "  GSB1000 ,Group Status Bit 1000" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB999  ,Group Status Bit 999" "Group 0,Group 1"
bitfld.long 0x00 6. "  GSB998  ,Group Status Bit 998" "Group 0,Group 1"
bitfld.long 0x00 5. "  GSB997  ,Group Status Bit 997" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB996  ,Group Status Bit 996" "Group 0,Group 1"
bitfld.long 0x00 3. "  GSB995  ,Group Status Bit 995" "Group 0,Group 1"
bitfld.long 0x00 2. "  GSB994  ,Group Status Bit 994" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB993  ,Group Status Bit 993" "Group 0,Group 1"
bitfld.long 0x00 0. "  GSB992  ,Group Status Bit 992" "Group 0,Group 1"
else
rgroup.long 0x00FC++0x03
line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
tree.end
endif
width 24.
tree "Set/Clear Enable Registers"
group.long 0x0100++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB31   ,Set/Clear Enable Bit 31" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB30   ,Set/Clear Enable Bit 30" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB29   ,Set/Clear Enable Bit 29" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB28   ,Set/Clear Enable Bit 28" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB27   ,Set/Clear Enable Bit 27" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB26   ,Set/Clear Enable Bit 26" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB25   ,Set/Clear Enable Bit 25" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB24   ,Set/Clear Enable Bit 24" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB23   ,Set/Clear Enable Bit 23" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB22   ,Set/Clear Enable Bit 22" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB21   ,Set/Clear Enable Bit 21" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB20   ,Set/Clear Enable Bit 20" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB19   ,Set/Clear Enable Bit 19" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB18   ,Set/Clear Enable Bit 18" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB17   ,Set/Clear Enable Bit 17" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB16   ,Set/Clear Enable Bit 16" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB15   ,Set/Clear Enable Bit 15" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB14   ,Set/Clear Enable Bit 14" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB13   ,Set/Clear Enable Bit 13" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB12   ,Set/Clear Enable Bit 12" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB11   ,Set/Clear Enable Bit 11" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB10   ,Set/Clear Enable Bit 10" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB9    ,Set/Clear Enable Bit 9" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB8    ,Set/Clear Enable Bit 8" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB7    ,Set/Clear Enable Bit 7" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB6    ,Set/Clear Enable Bit 6" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB5    ,Set/Clear Enable Bit 5" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB4    ,Set/Clear Enable Bit 4" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB3    ,Set/Clear Enable Bit 3" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB2    ,Set/Clear Enable Bit 2" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB1    ,Set/Clear Enable Bit 1" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB0    ,Set/Clear Enable Bit 0" "Disabled,Enabled"
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)
group.long 0x0104++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB63   ,Set/Clear Enable Bit 63" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB62   ,Set/Clear Enable Bit 62" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB61   ,Set/Clear Enable Bit 61" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB60   ,Set/Clear Enable Bit 60" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB59   ,Set/Clear Enable Bit 59" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB58   ,Set/Clear Enable Bit 58" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB57   ,Set/Clear Enable Bit 57" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB56   ,Set/Clear Enable Bit 56" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB55   ,Set/Clear Enable Bit 55" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB54   ,Set/Clear Enable Bit 54" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB53   ,Set/Clear Enable Bit 53" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB52   ,Set/Clear Enable Bit 52" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB51   ,Set/Clear Enable Bit 51" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB50   ,Set/Clear Enable Bit 50" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB49   ,Set/Clear Enable Bit 49" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB48   ,Set/Clear Enable Bit 48" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB47   ,Set/Clear Enable Bit 47" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB46   ,Set/Clear Enable Bit 46" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB45   ,Set/Clear Enable Bit 45" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB44   ,Set/Clear Enable Bit 44" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB43   ,Set/Clear Enable Bit 43" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB42   ,Set/Clear Enable Bit 42" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB41   ,Set/Clear Enable Bit 41" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB40   ,Set/Clear Enable Bit 40" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB39   ,Set/Clear Enable Bit 39" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB38   ,Set/Clear Enable Bit 38" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB37   ,Set/Clear Enable Bit 37" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB36   ,Set/Clear Enable Bit 36" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB35   ,Set/Clear Enable Bit 35" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB34   ,Set/Clear Enable Bit 34" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB33   ,Set/Clear Enable Bit 33" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB32   ,Set/Clear Enable Bit 32" "Disabled,Enabled"
else
rgroup.long 0x0104++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)
group.long 0x0108++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB95   ,Set/Clear Enable Bit 95" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB94   ,Set/Clear Enable Bit 94" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB93   ,Set/Clear Enable Bit 93" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB92   ,Set/Clear Enable Bit 92" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB91   ,Set/Clear Enable Bit 91" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB90   ,Set/Clear Enable Bit 90" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB89   ,Set/Clear Enable Bit 89" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB88   ,Set/Clear Enable Bit 88" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB87   ,Set/Clear Enable Bit 87" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB86   ,Set/Clear Enable Bit 86" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB85   ,Set/Clear Enable Bit 85" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB84   ,Set/Clear Enable Bit 84" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB83   ,Set/Clear Enable Bit 83" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB82   ,Set/Clear Enable Bit 82" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB81   ,Set/Clear Enable Bit 81" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB80   ,Set/Clear Enable Bit 80" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB79   ,Set/Clear Enable Bit 79" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB78   ,Set/Clear Enable Bit 78" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB77   ,Set/Clear Enable Bit 77" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB76   ,Set/Clear Enable Bit 76" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB75   ,Set/Clear Enable Bit 75" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB74   ,Set/Clear Enable Bit 74" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB73   ,Set/Clear Enable Bit 73" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB72   ,Set/Clear Enable Bit 72" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB71   ,Set/Clear Enable Bit 71" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB70   ,Set/Clear Enable Bit 70" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB69   ,Set/Clear Enable Bit 69" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB68   ,Set/Clear Enable Bit 68" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB67   ,Set/Clear Enable Bit 67" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB66   ,Set/Clear Enable Bit 66" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB65   ,Set/Clear Enable Bit 65" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB64   ,Set/Clear Enable Bit 64" "Disabled,Enabled"
else
rgroup.long 0x0108++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)
group.long 0x010C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB127  ,Set/Clear Enable Bit 127" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB126  ,Set/Clear Enable Bit 126" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB125  ,Set/Clear Enable Bit 125" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB124  ,Set/Clear Enable Bit 124" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB123  ,Set/Clear Enable Bit 123" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB122  ,Set/Clear Enable Bit 122" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB121  ,Set/Clear Enable Bit 121" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB120  ,Set/Clear Enable Bit 120" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB119  ,Set/Clear Enable Bit 119" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB118  ,Set/Clear Enable Bit 118" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB117  ,Set/Clear Enable Bit 117" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB116  ,Set/Clear Enable Bit 116" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB115  ,Set/Clear Enable Bit 115" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB114  ,Set/Clear Enable Bit 114" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB113  ,Set/Clear Enable Bit 113" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB112  ,Set/Clear Enable Bit 112" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB111  ,Set/Clear Enable Bit 111" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB110  ,Set/Clear Enable Bit 110" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB109  ,Set/Clear Enable Bit 109" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB108  ,Set/Clear Enable Bit 108" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB107  ,Set/Clear Enable Bit 107" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB106  ,Set/Clear Enable Bit 106" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB105  ,Set/Clear Enable Bit 105" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB104  ,Set/Clear Enable Bit 104" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB103  ,Set/Clear Enable Bit 103" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB102  ,Set/Clear Enable Bit 102" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB101  ,Set/Clear Enable Bit 101" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB100  ,Set/Clear Enable Bit 100" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB99   ,Set/Clear Enable Bit 99" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB98   ,Set/Clear Enable Bit 98" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB97   ,Set/Clear Enable Bit 97" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB96   ,Set/Clear Enable Bit 96" "Disabled,Enabled"
else
rgroup.long 0x010C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)
group.long 0x0110++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB159  ,Set/Clear Enable Bit 159" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB158  ,Set/Clear Enable Bit 158" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB157  ,Set/Clear Enable Bit 157" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB156  ,Set/Clear Enable Bit 156" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB155  ,Set/Clear Enable Bit 155" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB154  ,Set/Clear Enable Bit 154" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB153  ,Set/Clear Enable Bit 153" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB152  ,Set/Clear Enable Bit 152" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB151  ,Set/Clear Enable Bit 151" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB150  ,Set/Clear Enable Bit 150" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB149  ,Set/Clear Enable Bit 149" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB148  ,Set/Clear Enable Bit 148" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB147  ,Set/Clear Enable Bit 147" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB146  ,Set/Clear Enable Bit 146" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB145  ,Set/Clear Enable Bit 145" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB144  ,Set/Clear Enable Bit 144" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB143  ,Set/Clear Enable Bit 143" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB142  ,Set/Clear Enable Bit 142" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB141  ,Set/Clear Enable Bit 141" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB140  ,Set/Clear Enable Bit 140" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB139  ,Set/Clear Enable Bit 139" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB138  ,Set/Clear Enable Bit 138" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB137  ,Set/Clear Enable Bit 137" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB136  ,Set/Clear Enable Bit 136" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB135  ,Set/Clear Enable Bit 135" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB134  ,Set/Clear Enable Bit 134" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB133  ,Set/Clear Enable Bit 133" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB132  ,Set/Clear Enable Bit 132" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB131  ,Set/Clear Enable Bit 131" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB130  ,Set/Clear Enable Bit 130" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB129  ,Set/Clear Enable Bit 129" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB128  ,Set/Clear Enable Bit 128" "Disabled,Enabled"
else
rgroup.long 0x0110++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)
group.long 0x0114++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB191  ,Set/Clear Enable Bit 191" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB190  ,Set/Clear Enable Bit 190" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB189  ,Set/Clear Enable Bit 189" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB188  ,Set/Clear Enable Bit 188" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB187  ,Set/Clear Enable Bit 187" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB186  ,Set/Clear Enable Bit 186" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB185  ,Set/Clear Enable Bit 185" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB184  ,Set/Clear Enable Bit 184" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB183  ,Set/Clear Enable Bit 183" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB182  ,Set/Clear Enable Bit 182" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB181  ,Set/Clear Enable Bit 181" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB180  ,Set/Clear Enable Bit 180" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB179  ,Set/Clear Enable Bit 179" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB178  ,Set/Clear Enable Bit 178" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB177  ,Set/Clear Enable Bit 177" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB176  ,Set/Clear Enable Bit 176" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB175  ,Set/Clear Enable Bit 175" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB174  ,Set/Clear Enable Bit 174" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB173  ,Set/Clear Enable Bit 173" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB172  ,Set/Clear Enable Bit 172" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB171  ,Set/Clear Enable Bit 171" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB170  ,Set/Clear Enable Bit 170" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB169  ,Set/Clear Enable Bit 169" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB168  ,Set/Clear Enable Bit 168" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB167  ,Set/Clear Enable Bit 167" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB166  ,Set/Clear Enable Bit 166" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB165  ,Set/Clear Enable Bit 165" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB164  ,Set/Clear Enable Bit 164" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB163  ,Set/Clear Enable Bit 163" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB162  ,Set/Clear Enable Bit 162" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB161  ,Set/Clear Enable Bit 161" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB160  ,Set/Clear Enable Bit 160" "Disabled,Enabled"
else
rgroup.long 0x0114++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)
group.long 0x0118++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB223  ,Set/Clear Enable Bit 223" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB222  ,Set/Clear Enable Bit 222" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB221  ,Set/Clear Enable Bit 221" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB220  ,Set/Clear Enable Bit 220" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB219  ,Set/Clear Enable Bit 219" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB218  ,Set/Clear Enable Bit 218" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB217  ,Set/Clear Enable Bit 217" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB216  ,Set/Clear Enable Bit 216" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB215  ,Set/Clear Enable Bit 215" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB214  ,Set/Clear Enable Bit 214" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB213  ,Set/Clear Enable Bit 213" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB212  ,Set/Clear Enable Bit 212" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB211  ,Set/Clear Enable Bit 211" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB210  ,Set/Clear Enable Bit 210" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB209  ,Set/Clear Enable Bit 209" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB208  ,Set/Clear Enable Bit 208" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB207  ,Set/Clear Enable Bit 207" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB206  ,Set/Clear Enable Bit 206" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB205  ,Set/Clear Enable Bit 205" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB204  ,Set/Clear Enable Bit 204" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB203  ,Set/Clear Enable Bit 203" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB202  ,Set/Clear Enable Bit 202" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB201  ,Set/Clear Enable Bit 201" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB200  ,Set/Clear Enable Bit 200" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB199  ,Set/Clear Enable Bit 199" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB198  ,Set/Clear Enable Bit 198" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB197  ,Set/Clear Enable Bit 197" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB196  ,Set/Clear Enable Bit 196" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB195  ,Set/Clear Enable Bit 195" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB194  ,Set/Clear Enable Bit 194" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB193  ,Set/Clear Enable Bit 193" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB192  ,Set/Clear Enable Bit 192" "Disabled,Enabled"
else
rgroup.long 0x0118++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)
group.long 0x011C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB255  ,Set/Clear Enable Bit 255" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB254  ,Set/Clear Enable Bit 254" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB253  ,Set/Clear Enable Bit 253" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB252  ,Set/Clear Enable Bit 252" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB251  ,Set/Clear Enable Bit 251" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB250  ,Set/Clear Enable Bit 250" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB249  ,Set/Clear Enable Bit 249" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB248  ,Set/Clear Enable Bit 248" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB247  ,Set/Clear Enable Bit 247" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB246  ,Set/Clear Enable Bit 246" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB245  ,Set/Clear Enable Bit 245" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB244  ,Set/Clear Enable Bit 244" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB243  ,Set/Clear Enable Bit 243" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB242  ,Set/Clear Enable Bit 242" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB241  ,Set/Clear Enable Bit 241" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB240  ,Set/Clear Enable Bit 240" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB239  ,Set/Clear Enable Bit 239" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB238  ,Set/Clear Enable Bit 238" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB237  ,Set/Clear Enable Bit 237" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB236  ,Set/Clear Enable Bit 236" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB235  ,Set/Clear Enable Bit 235" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB234  ,Set/Clear Enable Bit 234" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB233  ,Set/Clear Enable Bit 233" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB232  ,Set/Clear Enable Bit 232" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB231  ,Set/Clear Enable Bit 231" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB230  ,Set/Clear Enable Bit 230" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB229  ,Set/Clear Enable Bit 229" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB228  ,Set/Clear Enable Bit 228" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB227  ,Set/Clear Enable Bit 227" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB226  ,Set/Clear Enable Bit 226" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB225  ,Set/Clear Enable Bit 225" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB224  ,Set/Clear Enable Bit 224" "Disabled,Enabled"
else
rgroup.long 0x011C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)
group.long 0x0120++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB287  ,Set/Clear Enable Bit 287" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB286  ,Set/Clear Enable Bit 286" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB285  ,Set/Clear Enable Bit 285" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB284  ,Set/Clear Enable Bit 284" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB283  ,Set/Clear Enable Bit 283" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB282  ,Set/Clear Enable Bit 282" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB281  ,Set/Clear Enable Bit 281" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB280  ,Set/Clear Enable Bit 280" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB279  ,Set/Clear Enable Bit 279" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB278  ,Set/Clear Enable Bit 278" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB277  ,Set/Clear Enable Bit 277" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB276  ,Set/Clear Enable Bit 276" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB275  ,Set/Clear Enable Bit 275" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB274  ,Set/Clear Enable Bit 274" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB273  ,Set/Clear Enable Bit 273" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB272  ,Set/Clear Enable Bit 272" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB271  ,Set/Clear Enable Bit 271" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB270  ,Set/Clear Enable Bit 270" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB269  ,Set/Clear Enable Bit 269" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB268  ,Set/Clear Enable Bit 268" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB267  ,Set/Clear Enable Bit 267" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB266  ,Set/Clear Enable Bit 266" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB265  ,Set/Clear Enable Bit 265" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB264  ,Set/Clear Enable Bit 264" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB263  ,Set/Clear Enable Bit 263" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB262  ,Set/Clear Enable Bit 262" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB261  ,Set/Clear Enable Bit 261" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB260  ,Set/Clear Enable Bit 260" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB259  ,Set/Clear Enable Bit 259" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB258  ,Set/Clear Enable Bit 258" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB257  ,Set/Clear Enable Bit 257" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB256  ,Set/Clear Enable Bit 256" "Disabled,Enabled"
else
rgroup.long 0x0120++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)
group.long 0x0124++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB319  ,Set/Clear Enable Bit 319" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB318  ,Set/Clear Enable Bit 318" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB317  ,Set/Clear Enable Bit 317" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB316  ,Set/Clear Enable Bit 316" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB315  ,Set/Clear Enable Bit 315" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB314  ,Set/Clear Enable Bit 314" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB313  ,Set/Clear Enable Bit 313" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB312  ,Set/Clear Enable Bit 312" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB311  ,Set/Clear Enable Bit 311" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB310  ,Set/Clear Enable Bit 310" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB309  ,Set/Clear Enable Bit 309" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB308  ,Set/Clear Enable Bit 308" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB307  ,Set/Clear Enable Bit 307" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB306  ,Set/Clear Enable Bit 306" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB305  ,Set/Clear Enable Bit 305" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB304  ,Set/Clear Enable Bit 304" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB303  ,Set/Clear Enable Bit 303" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB302  ,Set/Clear Enable Bit 302" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB301  ,Set/Clear Enable Bit 301" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB300  ,Set/Clear Enable Bit 300" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB299  ,Set/Clear Enable Bit 299" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB298  ,Set/Clear Enable Bit 298" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB297  ,Set/Clear Enable Bit 297" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB296  ,Set/Clear Enable Bit 296" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB295  ,Set/Clear Enable Bit 295" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB294  ,Set/Clear Enable Bit 294" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB293  ,Set/Clear Enable Bit 293" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB292  ,Set/Clear Enable Bit 292" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB291  ,Set/Clear Enable Bit 291" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB290  ,Set/Clear Enable Bit 290" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB289  ,Set/Clear Enable Bit 289" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB288  ,Set/Clear Enable Bit 288" "Disabled,Enabled"
else
rgroup.long 0x0124++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)
group.long 0x0128++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB351  ,Set/Clear Enable Bit 351" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB350  ,Set/Clear Enable Bit 350" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB349  ,Set/Clear Enable Bit 349" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB348  ,Set/Clear Enable Bit 348" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB347  ,Set/Clear Enable Bit 347" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB346  ,Set/Clear Enable Bit 346" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB345  ,Set/Clear Enable Bit 345" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB344  ,Set/Clear Enable Bit 344" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB343  ,Set/Clear Enable Bit 343" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB342  ,Set/Clear Enable Bit 342" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB341  ,Set/Clear Enable Bit 341" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB340  ,Set/Clear Enable Bit 340" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB339  ,Set/Clear Enable Bit 339" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB338  ,Set/Clear Enable Bit 338" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB337  ,Set/Clear Enable Bit 337" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB336  ,Set/Clear Enable Bit 336" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB335  ,Set/Clear Enable Bit 335" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB334  ,Set/Clear Enable Bit 334" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB333  ,Set/Clear Enable Bit 333" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB332  ,Set/Clear Enable Bit 332" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB331  ,Set/Clear Enable Bit 331" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB330  ,Set/Clear Enable Bit 330" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB329  ,Set/Clear Enable Bit 329" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB328  ,Set/Clear Enable Bit 328" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB327  ,Set/Clear Enable Bit 327" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB326  ,Set/Clear Enable Bit 326" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB325  ,Set/Clear Enable Bit 325" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB324  ,Set/Clear Enable Bit 324" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB323  ,Set/Clear Enable Bit 323" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB322  ,Set/Clear Enable Bit 322" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB321  ,Set/Clear Enable Bit 321" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB320  ,Set/Clear Enable Bit 320" "Disabled,Enabled"
else
rgroup.long 0x0128++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)
group.long 0x012C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB383  ,Set/Clear Enable Bit 383" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB382  ,Set/Clear Enable Bit 382" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB381  ,Set/Clear Enable Bit 381" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB380  ,Set/Clear Enable Bit 380" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB379  ,Set/Clear Enable Bit 379" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB378  ,Set/Clear Enable Bit 378" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB377  ,Set/Clear Enable Bit 377" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB376  ,Set/Clear Enable Bit 376" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB375  ,Set/Clear Enable Bit 375" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB374  ,Set/Clear Enable Bit 374" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB373  ,Set/Clear Enable Bit 373" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB372  ,Set/Clear Enable Bit 372" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB371  ,Set/Clear Enable Bit 371" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB370  ,Set/Clear Enable Bit 370" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB369  ,Set/Clear Enable Bit 369" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB368  ,Set/Clear Enable Bit 368" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB367  ,Set/Clear Enable Bit 367" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB366  ,Set/Clear Enable Bit 366" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB365  ,Set/Clear Enable Bit 365" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB364  ,Set/Clear Enable Bit 364" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB363  ,Set/Clear Enable Bit 363" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB362  ,Set/Clear Enable Bit 362" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB361  ,Set/Clear Enable Bit 361" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB360  ,Set/Clear Enable Bit 360" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB359  ,Set/Clear Enable Bit 359" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB358  ,Set/Clear Enable Bit 358" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB357  ,Set/Clear Enable Bit 357" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB356  ,Set/Clear Enable Bit 356" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB355  ,Set/Clear Enable Bit 355" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB354  ,Set/Clear Enable Bit 354" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB353  ,Set/Clear Enable Bit 353" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB352  ,Set/Clear Enable Bit 352" "Disabled,Enabled"
else
rgroup.long 0x012C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)
group.long 0x0130++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB415  ,Set/Clear Enable Bit 415" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB414  ,Set/Clear Enable Bit 414" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB413  ,Set/Clear Enable Bit 413" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB412  ,Set/Clear Enable Bit 412" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB411  ,Set/Clear Enable Bit 411" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB410  ,Set/Clear Enable Bit 410" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB409  ,Set/Clear Enable Bit 409" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB408  ,Set/Clear Enable Bit 408" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB407  ,Set/Clear Enable Bit 407" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB406  ,Set/Clear Enable Bit 406" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB405  ,Set/Clear Enable Bit 405" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB404  ,Set/Clear Enable Bit 404" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB403  ,Set/Clear Enable Bit 403" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB402  ,Set/Clear Enable Bit 402" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB401  ,Set/Clear Enable Bit 401" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB400  ,Set/Clear Enable Bit 400" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB399  ,Set/Clear Enable Bit 399" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB398  ,Set/Clear Enable Bit 398" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB397  ,Set/Clear Enable Bit 397" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB396  ,Set/Clear Enable Bit 396" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB395  ,Set/Clear Enable Bit 395" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB394  ,Set/Clear Enable Bit 394" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB393  ,Set/Clear Enable Bit 393" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB392  ,Set/Clear Enable Bit 392" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB391  ,Set/Clear Enable Bit 391" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB390  ,Set/Clear Enable Bit 390" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB389  ,Set/Clear Enable Bit 389" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB388  ,Set/Clear Enable Bit 388" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB387  ,Set/Clear Enable Bit 387" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB386  ,Set/Clear Enable Bit 386" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB385  ,Set/Clear Enable Bit 385" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB384  ,Set/Clear Enable Bit 384" "Disabled,Enabled"
else
rgroup.long 0x0130++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)
group.long 0x0134++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB447  ,Set/Clear Enable Bit 447" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB446  ,Set/Clear Enable Bit 446" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB445  ,Set/Clear Enable Bit 445" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB444  ,Set/Clear Enable Bit 444" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB443  ,Set/Clear Enable Bit 443" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB442  ,Set/Clear Enable Bit 442" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB441  ,Set/Clear Enable Bit 441" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB440  ,Set/Clear Enable Bit 440" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB439  ,Set/Clear Enable Bit 439" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB438  ,Set/Clear Enable Bit 438" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB437  ,Set/Clear Enable Bit 437" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB436  ,Set/Clear Enable Bit 436" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB435  ,Set/Clear Enable Bit 435" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB434  ,Set/Clear Enable Bit 434" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB433  ,Set/Clear Enable Bit 433" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB432  ,Set/Clear Enable Bit 432" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB431  ,Set/Clear Enable Bit 431" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB430  ,Set/Clear Enable Bit 430" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB429  ,Set/Clear Enable Bit 429" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB428  ,Set/Clear Enable Bit 428" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB427  ,Set/Clear Enable Bit 427" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB426  ,Set/Clear Enable Bit 426" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB425  ,Set/Clear Enable Bit 425" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB424  ,Set/Clear Enable Bit 424" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB423  ,Set/Clear Enable Bit 423" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB422  ,Set/Clear Enable Bit 422" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB421  ,Set/Clear Enable Bit 421" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB420  ,Set/Clear Enable Bit 420" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB419  ,Set/Clear Enable Bit 419" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB418  ,Set/Clear Enable Bit 418" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB417  ,Set/Clear Enable Bit 417" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB416  ,Set/Clear Enable Bit 416" "Disabled,Enabled"
else
rgroup.long 0x0134++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)
group.long 0x0138++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB479  ,Set/Clear Enable Bit 479" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB478  ,Set/Clear Enable Bit 478" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB477  ,Set/Clear Enable Bit 477" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB476  ,Set/Clear Enable Bit 476" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB475  ,Set/Clear Enable Bit 475" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB474  ,Set/Clear Enable Bit 474" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB473  ,Set/Clear Enable Bit 473" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB472  ,Set/Clear Enable Bit 472" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB471  ,Set/Clear Enable Bit 471" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB470  ,Set/Clear Enable Bit 470" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB469  ,Set/Clear Enable Bit 469" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB468  ,Set/Clear Enable Bit 468" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB467  ,Set/Clear Enable Bit 467" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB466  ,Set/Clear Enable Bit 466" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB465  ,Set/Clear Enable Bit 465" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB464  ,Set/Clear Enable Bit 464" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB463  ,Set/Clear Enable Bit 463" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB462  ,Set/Clear Enable Bit 462" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB461  ,Set/Clear Enable Bit 461" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB460  ,Set/Clear Enable Bit 460" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB459  ,Set/Clear Enable Bit 459" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB458  ,Set/Clear Enable Bit 458" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB457  ,Set/Clear Enable Bit 457" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB456  ,Set/Clear Enable Bit 456" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB455  ,Set/Clear Enable Bit 455" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB454  ,Set/Clear Enable Bit 454" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB453  ,Set/Clear Enable Bit 453" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB452  ,Set/Clear Enable Bit 452" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB451  ,Set/Clear Enable Bit 451" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB450  ,Set/Clear Enable Bit 450" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB449  ,Set/Clear Enable Bit 449" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB448  ,Set/Clear Enable Bit 448" "Disabled,Enabled"
else
rgroup.long 0x0138++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)
group.long 0x013C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB511  ,Set/Clear Enable Bit 511" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB510  ,Set/Clear Enable Bit 510" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB509  ,Set/Clear Enable Bit 509" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB508  ,Set/Clear Enable Bit 508" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB507  ,Set/Clear Enable Bit 507" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB506  ,Set/Clear Enable Bit 506" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB505  ,Set/Clear Enable Bit 505" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB504  ,Set/Clear Enable Bit 504" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB503  ,Set/Clear Enable Bit 503" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB502  ,Set/Clear Enable Bit 502" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB501  ,Set/Clear Enable Bit 501" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB500  ,Set/Clear Enable Bit 500" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB499  ,Set/Clear Enable Bit 499" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB498  ,Set/Clear Enable Bit 498" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB497  ,Set/Clear Enable Bit 497" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB496  ,Set/Clear Enable Bit 496" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB495  ,Set/Clear Enable Bit 495" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB494  ,Set/Clear Enable Bit 494" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB493  ,Set/Clear Enable Bit 493" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB492  ,Set/Clear Enable Bit 492" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB491  ,Set/Clear Enable Bit 491" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB490  ,Set/Clear Enable Bit 490" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB489  ,Set/Clear Enable Bit 489" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB488  ,Set/Clear Enable Bit 488" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB487  ,Set/Clear Enable Bit 487" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB486  ,Set/Clear Enable Bit 486" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB485  ,Set/Clear Enable Bit 485" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB484  ,Set/Clear Enable Bit 484" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB483  ,Set/Clear Enable Bit 483" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB482  ,Set/Clear Enable Bit 482" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB481  ,Set/Clear Enable Bit 481" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB480  ,Set/Clear Enable Bit 480" "Disabled,Enabled"
else
rgroup.long 0x013C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)
group.long 0x0140++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB543  ,Set/Clear Enable Bit 543" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB542  ,Set/Clear Enable Bit 542" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB541  ,Set/Clear Enable Bit 541" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB540  ,Set/Clear Enable Bit 540" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB539  ,Set/Clear Enable Bit 539" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB538  ,Set/Clear Enable Bit 538" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB537  ,Set/Clear Enable Bit 537" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB536  ,Set/Clear Enable Bit 536" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB535  ,Set/Clear Enable Bit 535" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB534  ,Set/Clear Enable Bit 534" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB533  ,Set/Clear Enable Bit 533" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB532  ,Set/Clear Enable Bit 532" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB531  ,Set/Clear Enable Bit 531" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB530  ,Set/Clear Enable Bit 530" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB529  ,Set/Clear Enable Bit 529" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB528  ,Set/Clear Enable Bit 528" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB527  ,Set/Clear Enable Bit 527" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB526  ,Set/Clear Enable Bit 526" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB525  ,Set/Clear Enable Bit 525" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB524  ,Set/Clear Enable Bit 524" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB523  ,Set/Clear Enable Bit 523" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB522  ,Set/Clear Enable Bit 522" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB521  ,Set/Clear Enable Bit 521" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB520  ,Set/Clear Enable Bit 520" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB519  ,Set/Clear Enable Bit 519" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB518  ,Set/Clear Enable Bit 518" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB517  ,Set/Clear Enable Bit 517" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB516  ,Set/Clear Enable Bit 516" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB515  ,Set/Clear Enable Bit 515" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB514  ,Set/Clear Enable Bit 514" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB513  ,Set/Clear Enable Bit 513" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB512  ,Set/Clear Enable Bit 512" "Disabled,Enabled"
else
rgroup.long 0x0140++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)
group.long 0x0144++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB575  ,Set/Clear Enable Bit 575" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB574  ,Set/Clear Enable Bit 574" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB573  ,Set/Clear Enable Bit 573" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB572  ,Set/Clear Enable Bit 572" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB571  ,Set/Clear Enable Bit 571" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB570  ,Set/Clear Enable Bit 570" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB569  ,Set/Clear Enable Bit 569" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB568  ,Set/Clear Enable Bit 568" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB567  ,Set/Clear Enable Bit 567" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB566  ,Set/Clear Enable Bit 566" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB565  ,Set/Clear Enable Bit 565" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB564  ,Set/Clear Enable Bit 564" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB563  ,Set/Clear Enable Bit 563" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB562  ,Set/Clear Enable Bit 562" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB561  ,Set/Clear Enable Bit 561" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB560  ,Set/Clear Enable Bit 560" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB559  ,Set/Clear Enable Bit 559" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB558  ,Set/Clear Enable Bit 558" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB557  ,Set/Clear Enable Bit 557" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB556  ,Set/Clear Enable Bit 556" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB555  ,Set/Clear Enable Bit 555" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB554  ,Set/Clear Enable Bit 554" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB553  ,Set/Clear Enable Bit 553" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB552  ,Set/Clear Enable Bit 552" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB551  ,Set/Clear Enable Bit 551" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB550  ,Set/Clear Enable Bit 550" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB549  ,Set/Clear Enable Bit 549" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB548  ,Set/Clear Enable Bit 548" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB547  ,Set/Clear Enable Bit 547" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB546  ,Set/Clear Enable Bit 546" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB545  ,Set/Clear Enable Bit 545" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB544  ,Set/Clear Enable Bit 544" "Disabled,Enabled"
else
rgroup.long 0x0144++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)
group.long 0x0148++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB607  ,Set/Clear Enable Bit 607" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB606  ,Set/Clear Enable Bit 606" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB605  ,Set/Clear Enable Bit 605" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB604  ,Set/Clear Enable Bit 604" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB603  ,Set/Clear Enable Bit 603" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB602  ,Set/Clear Enable Bit 602" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB601  ,Set/Clear Enable Bit 601" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB600  ,Set/Clear Enable Bit 600" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB599  ,Set/Clear Enable Bit 599" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB598  ,Set/Clear Enable Bit 598" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB597  ,Set/Clear Enable Bit 597" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB596  ,Set/Clear Enable Bit 596" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB595  ,Set/Clear Enable Bit 595" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB594  ,Set/Clear Enable Bit 594" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB593  ,Set/Clear Enable Bit 593" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB592  ,Set/Clear Enable Bit 592" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB591  ,Set/Clear Enable Bit 591" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB590  ,Set/Clear Enable Bit 590" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB589  ,Set/Clear Enable Bit 589" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB588  ,Set/Clear Enable Bit 588" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB587  ,Set/Clear Enable Bit 587" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB586  ,Set/Clear Enable Bit 586" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB585  ,Set/Clear Enable Bit 585" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB584  ,Set/Clear Enable Bit 584" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB583  ,Set/Clear Enable Bit 583" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB582  ,Set/Clear Enable Bit 582" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB581  ,Set/Clear Enable Bit 581" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB580  ,Set/Clear Enable Bit 580" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB579  ,Set/Clear Enable Bit 579" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB578  ,Set/Clear Enable Bit 578" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB577  ,Set/Clear Enable Bit 577" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB576  ,Set/Clear Enable Bit 576" "Disabled,Enabled"
else
rgroup.long 0x0148++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)
group.long 0x014C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB639  ,Set/Clear Enable Bit 639" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB638  ,Set/Clear Enable Bit 638" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB637  ,Set/Clear Enable Bit 637" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB636  ,Set/Clear Enable Bit 636" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB635  ,Set/Clear Enable Bit 635" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB634  ,Set/Clear Enable Bit 634" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB633  ,Set/Clear Enable Bit 633" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB632  ,Set/Clear Enable Bit 632" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB631  ,Set/Clear Enable Bit 631" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB630  ,Set/Clear Enable Bit 630" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB629  ,Set/Clear Enable Bit 629" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB628  ,Set/Clear Enable Bit 628" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB627  ,Set/Clear Enable Bit 627" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB626  ,Set/Clear Enable Bit 626" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB625  ,Set/Clear Enable Bit 625" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB624  ,Set/Clear Enable Bit 624" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB623  ,Set/Clear Enable Bit 623" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB622  ,Set/Clear Enable Bit 622" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB621  ,Set/Clear Enable Bit 621" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB620  ,Set/Clear Enable Bit 620" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB619  ,Set/Clear Enable Bit 619" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB618  ,Set/Clear Enable Bit 618" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB617  ,Set/Clear Enable Bit 617" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB616  ,Set/Clear Enable Bit 616" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB615  ,Set/Clear Enable Bit 615" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB614  ,Set/Clear Enable Bit 614" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB613  ,Set/Clear Enable Bit 613" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB612  ,Set/Clear Enable Bit 612" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB611  ,Set/Clear Enable Bit 611" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB610  ,Set/Clear Enable Bit 610" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB609  ,Set/Clear Enable Bit 609" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB608  ,Set/Clear Enable Bit 608" "Disabled,Enabled"
else
rgroup.long 0x014C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)
group.long 0x0150++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB671  ,Set/Clear Enable Bit 671" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB670  ,Set/Clear Enable Bit 670" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB669  ,Set/Clear Enable Bit 669" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB668  ,Set/Clear Enable Bit 668" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB667  ,Set/Clear Enable Bit 667" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB666  ,Set/Clear Enable Bit 666" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB665  ,Set/Clear Enable Bit 665" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB664  ,Set/Clear Enable Bit 664" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB663  ,Set/Clear Enable Bit 663" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB662  ,Set/Clear Enable Bit 662" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB661  ,Set/Clear Enable Bit 661" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB660  ,Set/Clear Enable Bit 660" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB659  ,Set/Clear Enable Bit 659" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB658  ,Set/Clear Enable Bit 658" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB657  ,Set/Clear Enable Bit 657" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB656  ,Set/Clear Enable Bit 656" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB655  ,Set/Clear Enable Bit 655" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB654  ,Set/Clear Enable Bit 654" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB653  ,Set/Clear Enable Bit 653" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB652  ,Set/Clear Enable Bit 652" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB651  ,Set/Clear Enable Bit 651" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB650  ,Set/Clear Enable Bit 650" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB649  ,Set/Clear Enable Bit 649" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB648  ,Set/Clear Enable Bit 648" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB647  ,Set/Clear Enable Bit 647" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB646  ,Set/Clear Enable Bit 646" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB645  ,Set/Clear Enable Bit 645" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB644  ,Set/Clear Enable Bit 644" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB643  ,Set/Clear Enable Bit 643" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB642  ,Set/Clear Enable Bit 642" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB641  ,Set/Clear Enable Bit 641" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB640  ,Set/Clear Enable Bit 640" "Disabled,Enabled"
else
rgroup.long 0x0150++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)
group.long 0x0154++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB703  ,Set/Clear Enable Bit 703" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB702  ,Set/Clear Enable Bit 702" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB701  ,Set/Clear Enable Bit 701" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB700  ,Set/Clear Enable Bit 700" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB699  ,Set/Clear Enable Bit 699" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB698  ,Set/Clear Enable Bit 698" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB697  ,Set/Clear Enable Bit 697" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB696  ,Set/Clear Enable Bit 696" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB695  ,Set/Clear Enable Bit 695" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB694  ,Set/Clear Enable Bit 694" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB693  ,Set/Clear Enable Bit 693" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB692  ,Set/Clear Enable Bit 692" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB691  ,Set/Clear Enable Bit 691" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB690  ,Set/Clear Enable Bit 690" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB689  ,Set/Clear Enable Bit 689" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB688  ,Set/Clear Enable Bit 688" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB687  ,Set/Clear Enable Bit 687" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB686  ,Set/Clear Enable Bit 686" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB685  ,Set/Clear Enable Bit 685" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB684  ,Set/Clear Enable Bit 684" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB683  ,Set/Clear Enable Bit 683" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB682  ,Set/Clear Enable Bit 682" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB681  ,Set/Clear Enable Bit 681" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB680  ,Set/Clear Enable Bit 680" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB679  ,Set/Clear Enable Bit 679" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB678  ,Set/Clear Enable Bit 678" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB677  ,Set/Clear Enable Bit 677" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB676  ,Set/Clear Enable Bit 676" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB675  ,Set/Clear Enable Bit 675" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB674  ,Set/Clear Enable Bit 674" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB673  ,Set/Clear Enable Bit 673" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB672  ,Set/Clear Enable Bit 672" "Disabled,Enabled"
else
rgroup.long 0x0154++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)
group.long 0x0158++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB735  ,Set/Clear Enable Bit 735" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB734  ,Set/Clear Enable Bit 734" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB733  ,Set/Clear Enable Bit 733" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB732  ,Set/Clear Enable Bit 732" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB731  ,Set/Clear Enable Bit 731" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB730  ,Set/Clear Enable Bit 730" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB729  ,Set/Clear Enable Bit 729" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB728  ,Set/Clear Enable Bit 728" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB727  ,Set/Clear Enable Bit 727" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB726  ,Set/Clear Enable Bit 726" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB725  ,Set/Clear Enable Bit 725" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB724  ,Set/Clear Enable Bit 724" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB723  ,Set/Clear Enable Bit 723" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB722  ,Set/Clear Enable Bit 722" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB721  ,Set/Clear Enable Bit 721" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB720  ,Set/Clear Enable Bit 720" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB719  ,Set/Clear Enable Bit 719" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB718  ,Set/Clear Enable Bit 718" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB717  ,Set/Clear Enable Bit 717" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB716  ,Set/Clear Enable Bit 716" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB715  ,Set/Clear Enable Bit 715" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB714  ,Set/Clear Enable Bit 714" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB713  ,Set/Clear Enable Bit 713" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB712  ,Set/Clear Enable Bit 712" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB711  ,Set/Clear Enable Bit 711" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB710  ,Set/Clear Enable Bit 710" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB709  ,Set/Clear Enable Bit 709" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB708  ,Set/Clear Enable Bit 708" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB707  ,Set/Clear Enable Bit 707" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB706  ,Set/Clear Enable Bit 706" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB705  ,Set/Clear Enable Bit 705" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB704  ,Set/Clear Enable Bit 704" "Disabled,Enabled"
else
rgroup.long 0x0158++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)
group.long 0x015C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB767  ,Set/Clear Enable Bit 767" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB766  ,Set/Clear Enable Bit 766" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB765  ,Set/Clear Enable Bit 765" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB764  ,Set/Clear Enable Bit 764" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB763  ,Set/Clear Enable Bit 763" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB762  ,Set/Clear Enable Bit 762" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB761  ,Set/Clear Enable Bit 761" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB760  ,Set/Clear Enable Bit 760" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB759  ,Set/Clear Enable Bit 759" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB758  ,Set/Clear Enable Bit 758" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB757  ,Set/Clear Enable Bit 757" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB756  ,Set/Clear Enable Bit 756" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB755  ,Set/Clear Enable Bit 755" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB754  ,Set/Clear Enable Bit 754" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB753  ,Set/Clear Enable Bit 753" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB752  ,Set/Clear Enable Bit 752" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB751  ,Set/Clear Enable Bit 751" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB750  ,Set/Clear Enable Bit 750" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB749  ,Set/Clear Enable Bit 749" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB748  ,Set/Clear Enable Bit 748" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB747  ,Set/Clear Enable Bit 747" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB746  ,Set/Clear Enable Bit 746" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB745  ,Set/Clear Enable Bit 745" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB744  ,Set/Clear Enable Bit 744" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB743  ,Set/Clear Enable Bit 743" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB742  ,Set/Clear Enable Bit 742" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB741  ,Set/Clear Enable Bit 741" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB740  ,Set/Clear Enable Bit 740" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB739  ,Set/Clear Enable Bit 739" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB738  ,Set/Clear Enable Bit 738" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB737  ,Set/Clear Enable Bit 737" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB736  ,Set/Clear Enable Bit 736" "Disabled,Enabled"
else
rgroup.long 0x015C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)
group.long 0x0160++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB799  ,Set/Clear Enable Bit 799" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB798  ,Set/Clear Enable Bit 798" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB797  ,Set/Clear Enable Bit 797" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB796  ,Set/Clear Enable Bit 796" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB795  ,Set/Clear Enable Bit 795" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB794  ,Set/Clear Enable Bit 794" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB793  ,Set/Clear Enable Bit 793" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB792  ,Set/Clear Enable Bit 792" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB791  ,Set/Clear Enable Bit 791" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB790  ,Set/Clear Enable Bit 790" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB789  ,Set/Clear Enable Bit 789" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB788  ,Set/Clear Enable Bit 788" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB787  ,Set/Clear Enable Bit 787" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB786  ,Set/Clear Enable Bit 786" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB785  ,Set/Clear Enable Bit 785" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB784  ,Set/Clear Enable Bit 784" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB783  ,Set/Clear Enable Bit 783" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB782  ,Set/Clear Enable Bit 782" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB781  ,Set/Clear Enable Bit 781" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB780  ,Set/Clear Enable Bit 780" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB779  ,Set/Clear Enable Bit 779" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB778  ,Set/Clear Enable Bit 778" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB777  ,Set/Clear Enable Bit 777" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB776  ,Set/Clear Enable Bit 776" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB775  ,Set/Clear Enable Bit 775" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB774  ,Set/Clear Enable Bit 774" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB773  ,Set/Clear Enable Bit 773" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB772  ,Set/Clear Enable Bit 772" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB771  ,Set/Clear Enable Bit 771" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB770  ,Set/Clear Enable Bit 770" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB769  ,Set/Clear Enable Bit 769" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB768  ,Set/Clear Enable Bit 768" "Disabled,Enabled"
else
rgroup.long 0x0160++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)
group.long 0x0164++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB831  ,Set/Clear Enable Bit 831" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB830  ,Set/Clear Enable Bit 830" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB829  ,Set/Clear Enable Bit 829" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB828  ,Set/Clear Enable Bit 828" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB827  ,Set/Clear Enable Bit 827" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB826  ,Set/Clear Enable Bit 826" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB825  ,Set/Clear Enable Bit 825" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB824  ,Set/Clear Enable Bit 824" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB823  ,Set/Clear Enable Bit 823" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB822  ,Set/Clear Enable Bit 822" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB821  ,Set/Clear Enable Bit 821" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB820  ,Set/Clear Enable Bit 820" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB819  ,Set/Clear Enable Bit 819" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB818  ,Set/Clear Enable Bit 818" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB817  ,Set/Clear Enable Bit 817" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB816  ,Set/Clear Enable Bit 816" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB815  ,Set/Clear Enable Bit 815" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB814  ,Set/Clear Enable Bit 814" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB813  ,Set/Clear Enable Bit 813" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB812  ,Set/Clear Enable Bit 812" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB811  ,Set/Clear Enable Bit 811" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB810  ,Set/Clear Enable Bit 810" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB809  ,Set/Clear Enable Bit 809" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB808  ,Set/Clear Enable Bit 808" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB807  ,Set/Clear Enable Bit 807" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB806  ,Set/Clear Enable Bit 806" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB805  ,Set/Clear Enable Bit 805" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB804  ,Set/Clear Enable Bit 804" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB803  ,Set/Clear Enable Bit 803" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB802  ,Set/Clear Enable Bit 802" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB801  ,Set/Clear Enable Bit 801" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB800  ,Set/Clear Enable Bit 800" "Disabled,Enabled"
else
rgroup.long 0x0164++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)
group.long 0x0168++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB863  ,Set/Clear Enable Bit 863" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB862  ,Set/Clear Enable Bit 862" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB861  ,Set/Clear Enable Bit 861" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB860  ,Set/Clear Enable Bit 860" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB859  ,Set/Clear Enable Bit 859" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB858  ,Set/Clear Enable Bit 858" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB857  ,Set/Clear Enable Bit 857" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB856  ,Set/Clear Enable Bit 856" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB855  ,Set/Clear Enable Bit 855" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB854  ,Set/Clear Enable Bit 854" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB853  ,Set/Clear Enable Bit 853" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB852  ,Set/Clear Enable Bit 852" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB851  ,Set/Clear Enable Bit 851" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB850  ,Set/Clear Enable Bit 850" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB849  ,Set/Clear Enable Bit 849" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB848  ,Set/Clear Enable Bit 848" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB847  ,Set/Clear Enable Bit 847" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB846  ,Set/Clear Enable Bit 846" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB845  ,Set/Clear Enable Bit 845" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB844  ,Set/Clear Enable Bit 844" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB843  ,Set/Clear Enable Bit 843" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB842  ,Set/Clear Enable Bit 842" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB841  ,Set/Clear Enable Bit 841" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB840  ,Set/Clear Enable Bit 840" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB839  ,Set/Clear Enable Bit 839" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB838  ,Set/Clear Enable Bit 838" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB837  ,Set/Clear Enable Bit 837" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB836  ,Set/Clear Enable Bit 836" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB835  ,Set/Clear Enable Bit 835" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB834  ,Set/Clear Enable Bit 834" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB833  ,Set/Clear Enable Bit 833" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB832  ,Set/Clear Enable Bit 832" "Disabled,Enabled"
else
rgroup.long 0x0168++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)
group.long 0x016C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB895  ,Set/Clear Enable Bit 895" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB894  ,Set/Clear Enable Bit 894" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB893  ,Set/Clear Enable Bit 893" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB892  ,Set/Clear Enable Bit 892" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB891  ,Set/Clear Enable Bit 891" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB890  ,Set/Clear Enable Bit 890" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB889  ,Set/Clear Enable Bit 889" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB888  ,Set/Clear Enable Bit 888" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB887  ,Set/Clear Enable Bit 887" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB886  ,Set/Clear Enable Bit 886" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB885  ,Set/Clear Enable Bit 885" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB884  ,Set/Clear Enable Bit 884" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB883  ,Set/Clear Enable Bit 883" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB882  ,Set/Clear Enable Bit 882" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB881  ,Set/Clear Enable Bit 881" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB880  ,Set/Clear Enable Bit 880" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB879  ,Set/Clear Enable Bit 879" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB878  ,Set/Clear Enable Bit 878" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB877  ,Set/Clear Enable Bit 877" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB876  ,Set/Clear Enable Bit 876" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB875  ,Set/Clear Enable Bit 875" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB874  ,Set/Clear Enable Bit 874" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB873  ,Set/Clear Enable Bit 873" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB872  ,Set/Clear Enable Bit 872" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB871  ,Set/Clear Enable Bit 871" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB870  ,Set/Clear Enable Bit 870" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB869  ,Set/Clear Enable Bit 869" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB868  ,Set/Clear Enable Bit 868" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB867  ,Set/Clear Enable Bit 867" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB866  ,Set/Clear Enable Bit 866" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB865  ,Set/Clear Enable Bit 865" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB864  ,Set/Clear Enable Bit 864" "Disabled,Enabled"
else
rgroup.long 0x016C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)
group.long 0x0170++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB927  ,Set/Clear Enable Bit 927" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB926  ,Set/Clear Enable Bit 926" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB925  ,Set/Clear Enable Bit 925" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB924  ,Set/Clear Enable Bit 924" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB923  ,Set/Clear Enable Bit 923" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB922  ,Set/Clear Enable Bit 922" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB921  ,Set/Clear Enable Bit 921" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB920  ,Set/Clear Enable Bit 920" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB919  ,Set/Clear Enable Bit 919" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB918  ,Set/Clear Enable Bit 918" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB917  ,Set/Clear Enable Bit 917" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB916  ,Set/Clear Enable Bit 916" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB915  ,Set/Clear Enable Bit 915" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB914  ,Set/Clear Enable Bit 914" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB913  ,Set/Clear Enable Bit 913" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB912  ,Set/Clear Enable Bit 912" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB911  ,Set/Clear Enable Bit 911" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB910  ,Set/Clear Enable Bit 910" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB909  ,Set/Clear Enable Bit 909" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB908  ,Set/Clear Enable Bit 908" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB907  ,Set/Clear Enable Bit 907" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB906  ,Set/Clear Enable Bit 906" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB905  ,Set/Clear Enable Bit 905" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB904  ,Set/Clear Enable Bit 904" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB903  ,Set/Clear Enable Bit 903" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB902  ,Set/Clear Enable Bit 902" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB901  ,Set/Clear Enable Bit 901" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB900  ,Set/Clear Enable Bit 900" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB899  ,Set/Clear Enable Bit 899" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB898  ,Set/Clear Enable Bit 898" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB897  ,Set/Clear Enable Bit 897" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB896  ,Set/Clear Enable Bit 896" "Disabled,Enabled"
else
rgroup.long 0x0170++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)
group.long 0x0174++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB959  ,Set/Clear Enable Bit 959" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB958  ,Set/Clear Enable Bit 958" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB957  ,Set/Clear Enable Bit 957" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB956  ,Set/Clear Enable Bit 956" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB955  ,Set/Clear Enable Bit 955" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB954  ,Set/Clear Enable Bit 954" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB953  ,Set/Clear Enable Bit 953" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB952  ,Set/Clear Enable Bit 952" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB951  ,Set/Clear Enable Bit 951" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB950  ,Set/Clear Enable Bit 950" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB949  ,Set/Clear Enable Bit 949" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB948  ,Set/Clear Enable Bit 948" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB947  ,Set/Clear Enable Bit 947" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB946  ,Set/Clear Enable Bit 946" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB945  ,Set/Clear Enable Bit 945" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB944  ,Set/Clear Enable Bit 944" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB943  ,Set/Clear Enable Bit 943" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB942  ,Set/Clear Enable Bit 942" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB941  ,Set/Clear Enable Bit 941" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB940  ,Set/Clear Enable Bit 940" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB939  ,Set/Clear Enable Bit 939" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB938  ,Set/Clear Enable Bit 938" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB937  ,Set/Clear Enable Bit 937" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB936  ,Set/Clear Enable Bit 936" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB935  ,Set/Clear Enable Bit 935" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB934  ,Set/Clear Enable Bit 934" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB933  ,Set/Clear Enable Bit 933" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB932  ,Set/Clear Enable Bit 932" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB931  ,Set/Clear Enable Bit 931" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB930  ,Set/Clear Enable Bit 930" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB929  ,Set/Clear Enable Bit 929" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB928  ,Set/Clear Enable Bit 928" "Disabled,Enabled"
else
rgroup.long 0x0174++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)
group.long 0x0178++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB991  ,Set/Clear Enable Bit 991" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB990  ,Set/Clear Enable Bit 990" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB989  ,Set/Clear Enable Bit 989" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB988  ,Set/Clear Enable Bit 988" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB987  ,Set/Clear Enable Bit 987" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB986  ,Set/Clear Enable Bit 986" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB985  ,Set/Clear Enable Bit 985" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB984  ,Set/Clear Enable Bit 984" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB983  ,Set/Clear Enable Bit 983" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB982  ,Set/Clear Enable Bit 982" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB981  ,Set/Clear Enable Bit 981" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB980  ,Set/Clear Enable Bit 980" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB979  ,Set/Clear Enable Bit 979" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB978  ,Set/Clear Enable Bit 978" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB977  ,Set/Clear Enable Bit 977" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB976  ,Set/Clear Enable Bit 976" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB975  ,Set/Clear Enable Bit 975" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB974  ,Set/Clear Enable Bit 974" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB973  ,Set/Clear Enable Bit 973" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB972  ,Set/Clear Enable Bit 972" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB971  ,Set/Clear Enable Bit 971" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB970  ,Set/Clear Enable Bit 970" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB969  ,Set/Clear Enable Bit 969" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB968  ,Set/Clear Enable Bit 968" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB967  ,Set/Clear Enable Bit 967" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB966  ,Set/Clear Enable Bit 966" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB965  ,Set/Clear Enable Bit 965" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB964  ,Set/Clear Enable Bit 964" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB963  ,Set/Clear Enable Bit 963" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB962  ,Set/Clear Enable Bit 962" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB961  ,Set/Clear Enable Bit 961" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB960  ,Set/Clear Enable Bit 960" "Disabled,Enabled"
else
rgroup.long 0x0178++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)==0x1F)
group.long 0x017C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER31,Interrupt Set/Clear Enable Register 31"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB1019 ,Set/Clear Enable Bit 1019" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB1018 ,Set/Clear Enable Bit 1018" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB1017 ,Set/Clear Enable Bit 1017" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB1016 ,Set/Clear Enable Bit 1016" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB1015 ,Set/Clear Enable Bit 1015" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB1014 ,Set/Clear Enable Bit 1014" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB1013 ,Set/Clear Enable Bit 1013" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB1012 ,Set/Clear Enable Bit 1012" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB1011 ,Set/Clear Enable Bit 1011" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB1010 ,Set/Clear Enable Bit 1010" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB1009 ,Set/Clear Enable Bit 1009" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB1008 ,Set/Clear Enable Bit 1008" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB1007 ,Set/Clear Enable Bit 1007" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB1006 ,Set/Clear Enable Bit 1006" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB1005 ,Set/Clear Enable Bit 1005" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB1004 ,Set/Clear Enable Bit 1004" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB1003 ,Set/Clear Enable Bit 1003" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB1002 ,Set/Clear Enable Bit 1002" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB1001 ,Set/Clear Enable Bit 1001" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB1000 ,Set/Clear Enable Bit 1000" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB999  ,Set/Clear Enable Bit 999" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB998  ,Set/Clear Enable Bit 998" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB997  ,Set/Clear Enable Bit 997" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB996  ,Set/Clear Enable Bit 996" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB995  ,Set/Clear Enable Bit 995" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB994  ,Set/Clear Enable Bit 994" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB993  ,Set/Clear Enable Bit 993" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB992  ,Set/Clear Enable Bit 992" "Disabled,Enabled"
else
rgroup.long 0x017C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER31,Interrupt Set/Clear Enable Register 31"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
tree.end
width 22.
tree "Set/Clear Pending Registers"
group.long 0x0200++0x03
line.long 0x0 "GICD_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND31   ,Set/Clear Pending Bit 31" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND30   ,Set/Clear Pending Bit 30" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND29   ,Set/Clear Pending Bit 29" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND28   ,Set/Clear Pending Bit 28" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND27   ,Set/Clear Pending Bit 27" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND26   ,Set/Clear Pending Bit 26" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND25   ,Set/Clear Pending Bit 25" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND24   ,Set/Clear Pending Bit 24" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND23   ,Set/Clear Pending Bit 23" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND22   ,Set/Clear Pending Bit 22" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND21   ,Set/Clear Pending Bit 21" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND20   ,Set/Clear Pending Bit 20" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND19   ,Set/Clear Pending Bit 19" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND18   ,Set/Clear Pending Bit 18" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND17   ,Set/Clear Pending Bit 17" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND16   ,Set/Clear Pending Bit 16" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND15   ,Set/Clear Pending Bit 15" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND14   ,Set/Clear Pending Bit 14" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND13   ,Set/Clear Pending Bit 13" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND12   ,Set/Clear Pending Bit 12" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND11   ,Set/Clear Pending Bit 11" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND10   ,Set/Clear Pending Bit 10" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND9    ,Set/Clear Pending Bit 9" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND8    ,Set/Clear Pending Bit 8" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND7    ,Set/Clear Pending Bit 7" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND6    ,Set/Clear Pending Bit 6" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND5    ,Set/Clear Pending Bit 5" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND4    ,Set/Clear Pending Bit 4" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND3    ,Set/Clear Pending Bit 3" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND2    ,Set/Clear Pending Bit 2" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND1    ,Set/Clear Pending Bit 1" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND0    ,Set/Clear Pending Bit 0" "Not pending,Pending"
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)
group.long 0x0204++0x03
line.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND63   ,Set/Clear Pending Bit 63" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND62   ,Set/Clear Pending Bit 62" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND61   ,Set/Clear Pending Bit 61" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND60   ,Set/Clear Pending Bit 60" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND59   ,Set/Clear Pending Bit 59" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND58   ,Set/Clear Pending Bit 58" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND57   ,Set/Clear Pending Bit 57" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND56   ,Set/Clear Pending Bit 56" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND55   ,Set/Clear Pending Bit 55" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND54   ,Set/Clear Pending Bit 54" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND53   ,Set/Clear Pending Bit 53" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND52   ,Set/Clear Pending Bit 52" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND51   ,Set/Clear Pending Bit 51" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND50   ,Set/Clear Pending Bit 50" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND49   ,Set/Clear Pending Bit 49" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND48   ,Set/Clear Pending Bit 48" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND47   ,Set/Clear Pending Bit 47" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND46   ,Set/Clear Pending Bit 46" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND45   ,Set/Clear Pending Bit 45" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND44   ,Set/Clear Pending Bit 44" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND43   ,Set/Clear Pending Bit 43" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND42   ,Set/Clear Pending Bit 42" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND41   ,Set/Clear Pending Bit 41" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND40   ,Set/Clear Pending Bit 40" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND39   ,Set/Clear Pending Bit 39" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND38   ,Set/Clear Pending Bit 38" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND37   ,Set/Clear Pending Bit 37" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND36   ,Set/Clear Pending Bit 36" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND35   ,Set/Clear Pending Bit 35" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND34   ,Set/Clear Pending Bit 34" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND33   ,Set/Clear Pending Bit 33" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND32   ,Set/Clear Pending Bit 32" "Not pending,Pending"
else
rgroup.long 0x0204++0x03
line.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)
group.long 0x0208++0x03
line.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND95   ,Set/Clear Pending Bit 95" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND94   ,Set/Clear Pending Bit 94" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND93   ,Set/Clear Pending Bit 93" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND92   ,Set/Clear Pending Bit 92" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND91   ,Set/Clear Pending Bit 91" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND90   ,Set/Clear Pending Bit 90" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND89   ,Set/Clear Pending Bit 89" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND88   ,Set/Clear Pending Bit 88" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND87   ,Set/Clear Pending Bit 87" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND86   ,Set/Clear Pending Bit 86" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND85   ,Set/Clear Pending Bit 85" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND84   ,Set/Clear Pending Bit 84" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND83   ,Set/Clear Pending Bit 83" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND82   ,Set/Clear Pending Bit 82" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND81   ,Set/Clear Pending Bit 81" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND80   ,Set/Clear Pending Bit 80" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND79   ,Set/Clear Pending Bit 79" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND78   ,Set/Clear Pending Bit 78" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND77   ,Set/Clear Pending Bit 77" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND76   ,Set/Clear Pending Bit 76" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND75   ,Set/Clear Pending Bit 75" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND74   ,Set/Clear Pending Bit 74" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND73   ,Set/Clear Pending Bit 73" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND72   ,Set/Clear Pending Bit 72" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND71   ,Set/Clear Pending Bit 71" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND70   ,Set/Clear Pending Bit 70" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND69   ,Set/Clear Pending Bit 69" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND68   ,Set/Clear Pending Bit 68" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND67   ,Set/Clear Pending Bit 67" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND66   ,Set/Clear Pending Bit 66" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND65   ,Set/Clear Pending Bit 65" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND64   ,Set/Clear Pending Bit 64" "Not pending,Pending"
else
rgroup.long 0x0208++0x03
line.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)
group.long 0x020C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND127  ,Set/Clear Pending Bit 127" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND126  ,Set/Clear Pending Bit 126" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND125  ,Set/Clear Pending Bit 125" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND124  ,Set/Clear Pending Bit 124" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND123  ,Set/Clear Pending Bit 123" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND122  ,Set/Clear Pending Bit 122" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND121  ,Set/Clear Pending Bit 121" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND120  ,Set/Clear Pending Bit 120" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND119  ,Set/Clear Pending Bit 119" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND118  ,Set/Clear Pending Bit 118" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND117  ,Set/Clear Pending Bit 117" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND116  ,Set/Clear Pending Bit 116" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND115  ,Set/Clear Pending Bit 115" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND114  ,Set/Clear Pending Bit 114" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND113  ,Set/Clear Pending Bit 113" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND112  ,Set/Clear Pending Bit 112" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND111  ,Set/Clear Pending Bit 111" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND110  ,Set/Clear Pending Bit 110" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND109  ,Set/Clear Pending Bit 109" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND108  ,Set/Clear Pending Bit 108" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND107  ,Set/Clear Pending Bit 107" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND106  ,Set/Clear Pending Bit 106" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND105  ,Set/Clear Pending Bit 105" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND104  ,Set/Clear Pending Bit 104" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND103  ,Set/Clear Pending Bit 103" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND102  ,Set/Clear Pending Bit 102" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND101  ,Set/Clear Pending Bit 101" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND100  ,Set/Clear Pending Bit 100" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND99   ,Set/Clear Pending Bit 99" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND98   ,Set/Clear Pending Bit 98" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND97   ,Set/Clear Pending Bit 97" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND96   ,Set/Clear Pending Bit 96" "Not pending,Pending"
else
rgroup.long 0x020C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)
group.long 0x0210++0x03
line.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND159  ,Set/Clear Pending Bit 159" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND158  ,Set/Clear Pending Bit 158" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND157  ,Set/Clear Pending Bit 157" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND156  ,Set/Clear Pending Bit 156" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND155  ,Set/Clear Pending Bit 155" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND154  ,Set/Clear Pending Bit 154" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND153  ,Set/Clear Pending Bit 153" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND152  ,Set/Clear Pending Bit 152" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND151  ,Set/Clear Pending Bit 151" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND150  ,Set/Clear Pending Bit 150" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND149  ,Set/Clear Pending Bit 149" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND148  ,Set/Clear Pending Bit 148" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND147  ,Set/Clear Pending Bit 147" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND146  ,Set/Clear Pending Bit 146" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND145  ,Set/Clear Pending Bit 145" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND144  ,Set/Clear Pending Bit 144" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND143  ,Set/Clear Pending Bit 143" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND142  ,Set/Clear Pending Bit 142" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND141  ,Set/Clear Pending Bit 141" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND140  ,Set/Clear Pending Bit 140" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND139  ,Set/Clear Pending Bit 139" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND138  ,Set/Clear Pending Bit 138" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND137  ,Set/Clear Pending Bit 137" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND136  ,Set/Clear Pending Bit 136" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND135  ,Set/Clear Pending Bit 135" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND134  ,Set/Clear Pending Bit 134" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND133  ,Set/Clear Pending Bit 133" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND132  ,Set/Clear Pending Bit 132" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND131  ,Set/Clear Pending Bit 131" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND130  ,Set/Clear Pending Bit 130" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND129  ,Set/Clear Pending Bit 129" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND128  ,Set/Clear Pending Bit 128" "Not pending,Pending"
else
rgroup.long 0x0210++0x03
line.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)
group.long 0x0214++0x03
line.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND191  ,Set/Clear Pending Bit 191" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND190  ,Set/Clear Pending Bit 190" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND189  ,Set/Clear Pending Bit 189" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND188  ,Set/Clear Pending Bit 188" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND187  ,Set/Clear Pending Bit 187" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND186  ,Set/Clear Pending Bit 186" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND185  ,Set/Clear Pending Bit 185" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND184  ,Set/Clear Pending Bit 184" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND183  ,Set/Clear Pending Bit 183" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND182  ,Set/Clear Pending Bit 182" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND181  ,Set/Clear Pending Bit 181" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND180  ,Set/Clear Pending Bit 180" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND179  ,Set/Clear Pending Bit 179" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND178  ,Set/Clear Pending Bit 178" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND177  ,Set/Clear Pending Bit 177" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND176  ,Set/Clear Pending Bit 176" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND175  ,Set/Clear Pending Bit 175" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND174  ,Set/Clear Pending Bit 174" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND173  ,Set/Clear Pending Bit 173" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND172  ,Set/Clear Pending Bit 172" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND171  ,Set/Clear Pending Bit 171" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND170  ,Set/Clear Pending Bit 170" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND169  ,Set/Clear Pending Bit 169" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND168  ,Set/Clear Pending Bit 168" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND167  ,Set/Clear Pending Bit 167" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND166  ,Set/Clear Pending Bit 166" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND165  ,Set/Clear Pending Bit 165" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND164  ,Set/Clear Pending Bit 164" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND163  ,Set/Clear Pending Bit 163" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND162  ,Set/Clear Pending Bit 162" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND161  ,Set/Clear Pending Bit 161" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND160  ,Set/Clear Pending Bit 160" "Not pending,Pending"
else
rgroup.long 0x0214++0x03
line.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)
group.long 0x0218++0x03
line.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND223  ,Set/Clear Pending Bit 223" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND222  ,Set/Clear Pending Bit 222" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND221  ,Set/Clear Pending Bit 221" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND220  ,Set/Clear Pending Bit 220" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND219  ,Set/Clear Pending Bit 219" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND218  ,Set/Clear Pending Bit 218" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND217  ,Set/Clear Pending Bit 217" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND216  ,Set/Clear Pending Bit 216" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND215  ,Set/Clear Pending Bit 215" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND214  ,Set/Clear Pending Bit 214" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND213  ,Set/Clear Pending Bit 213" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND212  ,Set/Clear Pending Bit 212" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND211  ,Set/Clear Pending Bit 211" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND210  ,Set/Clear Pending Bit 210" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND209  ,Set/Clear Pending Bit 209" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND208  ,Set/Clear Pending Bit 208" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND207  ,Set/Clear Pending Bit 207" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND206  ,Set/Clear Pending Bit 206" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND205  ,Set/Clear Pending Bit 205" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND204  ,Set/Clear Pending Bit 204" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND203  ,Set/Clear Pending Bit 203" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND202  ,Set/Clear Pending Bit 202" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND201  ,Set/Clear Pending Bit 201" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND200  ,Set/Clear Pending Bit 200" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND199  ,Set/Clear Pending Bit 199" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND198  ,Set/Clear Pending Bit 198" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND197  ,Set/Clear Pending Bit 197" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND196  ,Set/Clear Pending Bit 196" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND195  ,Set/Clear Pending Bit 195" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND194  ,Set/Clear Pending Bit 194" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND193  ,Set/Clear Pending Bit 193" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND192  ,Set/Clear Pending Bit 192" "Not pending,Pending"
else
rgroup.long 0x0218++0x03
line.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)
group.long 0x021C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND255  ,Set/Clear Pending Bit 255" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND254  ,Set/Clear Pending Bit 254" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND253  ,Set/Clear Pending Bit 253" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND252  ,Set/Clear Pending Bit 252" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND251  ,Set/Clear Pending Bit 251" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND250  ,Set/Clear Pending Bit 250" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND249  ,Set/Clear Pending Bit 249" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND248  ,Set/Clear Pending Bit 248" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND247  ,Set/Clear Pending Bit 247" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND246  ,Set/Clear Pending Bit 246" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND245  ,Set/Clear Pending Bit 245" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND244  ,Set/Clear Pending Bit 244" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND243  ,Set/Clear Pending Bit 243" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND242  ,Set/Clear Pending Bit 242" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND241  ,Set/Clear Pending Bit 241" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND240  ,Set/Clear Pending Bit 240" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND239  ,Set/Clear Pending Bit 239" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND238  ,Set/Clear Pending Bit 238" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND237  ,Set/Clear Pending Bit 237" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND236  ,Set/Clear Pending Bit 236" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND235  ,Set/Clear Pending Bit 235" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND234  ,Set/Clear Pending Bit 234" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND233  ,Set/Clear Pending Bit 233" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND232  ,Set/Clear Pending Bit 232" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND231  ,Set/Clear Pending Bit 231" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND230  ,Set/Clear Pending Bit 230" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND229  ,Set/Clear Pending Bit 229" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND228  ,Set/Clear Pending Bit 228" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND227  ,Set/Clear Pending Bit 227" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND226  ,Set/Clear Pending Bit 226" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND225  ,Set/Clear Pending Bit 225" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND224  ,Set/Clear Pending Bit 224" "Not pending,Pending"
else
rgroup.long 0x021C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)
group.long 0x0220++0x03
line.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND287  ,Set/Clear Pending Bit 287" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND286  ,Set/Clear Pending Bit 286" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND285  ,Set/Clear Pending Bit 285" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND284  ,Set/Clear Pending Bit 284" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND283  ,Set/Clear Pending Bit 283" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND282  ,Set/Clear Pending Bit 282" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND281  ,Set/Clear Pending Bit 281" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND280  ,Set/Clear Pending Bit 280" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND279  ,Set/Clear Pending Bit 279" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND278  ,Set/Clear Pending Bit 278" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND277  ,Set/Clear Pending Bit 277" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND276  ,Set/Clear Pending Bit 276" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND275  ,Set/Clear Pending Bit 275" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND274  ,Set/Clear Pending Bit 274" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND273  ,Set/Clear Pending Bit 273" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND272  ,Set/Clear Pending Bit 272" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND271  ,Set/Clear Pending Bit 271" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND270  ,Set/Clear Pending Bit 270" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND269  ,Set/Clear Pending Bit 269" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND268  ,Set/Clear Pending Bit 268" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND267  ,Set/Clear Pending Bit 267" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND266  ,Set/Clear Pending Bit 266" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND265  ,Set/Clear Pending Bit 265" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND264  ,Set/Clear Pending Bit 264" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND263  ,Set/Clear Pending Bit 263" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND262  ,Set/Clear Pending Bit 262" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND261  ,Set/Clear Pending Bit 261" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND260  ,Set/Clear Pending Bit 260" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND259  ,Set/Clear Pending Bit 259" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND258  ,Set/Clear Pending Bit 258" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND257  ,Set/Clear Pending Bit 257" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND256  ,Set/Clear Pending Bit 256" "Not pending,Pending"
else
rgroup.long 0x0220++0x03
line.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)
group.long 0x0224++0x03
line.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND319  ,Set/Clear Pending Bit 319" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND318  ,Set/Clear Pending Bit 318" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND317  ,Set/Clear Pending Bit 317" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND316  ,Set/Clear Pending Bit 316" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND315  ,Set/Clear Pending Bit 315" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND314  ,Set/Clear Pending Bit 314" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND313  ,Set/Clear Pending Bit 313" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND312  ,Set/Clear Pending Bit 312" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND311  ,Set/Clear Pending Bit 311" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND310  ,Set/Clear Pending Bit 310" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND309  ,Set/Clear Pending Bit 309" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND308  ,Set/Clear Pending Bit 308" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND307  ,Set/Clear Pending Bit 307" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND306  ,Set/Clear Pending Bit 306" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND305  ,Set/Clear Pending Bit 305" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND304  ,Set/Clear Pending Bit 304" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND303  ,Set/Clear Pending Bit 303" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND302  ,Set/Clear Pending Bit 302" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND301  ,Set/Clear Pending Bit 301" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND300  ,Set/Clear Pending Bit 300" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND299  ,Set/Clear Pending Bit 299" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND298  ,Set/Clear Pending Bit 298" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND297  ,Set/Clear Pending Bit 297" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND296  ,Set/Clear Pending Bit 296" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND295  ,Set/Clear Pending Bit 295" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND294  ,Set/Clear Pending Bit 294" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND293  ,Set/Clear Pending Bit 293" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND292  ,Set/Clear Pending Bit 292" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND291  ,Set/Clear Pending Bit 291" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND290  ,Set/Clear Pending Bit 290" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND289  ,Set/Clear Pending Bit 289" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND288  ,Set/Clear Pending Bit 288" "Not pending,Pending"
else
rgroup.long 0x0224++0x03
line.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)
group.long 0x0228++0x03
line.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND351  ,Set/Clear Pending Bit 351" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND350  ,Set/Clear Pending Bit 350" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND349  ,Set/Clear Pending Bit 349" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND348  ,Set/Clear Pending Bit 348" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND347  ,Set/Clear Pending Bit 347" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND346  ,Set/Clear Pending Bit 346" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND345  ,Set/Clear Pending Bit 345" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND344  ,Set/Clear Pending Bit 344" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND343  ,Set/Clear Pending Bit 343" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND342  ,Set/Clear Pending Bit 342" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND341  ,Set/Clear Pending Bit 341" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND340  ,Set/Clear Pending Bit 340" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND339  ,Set/Clear Pending Bit 339" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND338  ,Set/Clear Pending Bit 338" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND337  ,Set/Clear Pending Bit 337" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND336  ,Set/Clear Pending Bit 336" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND335  ,Set/Clear Pending Bit 335" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND334  ,Set/Clear Pending Bit 334" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND333  ,Set/Clear Pending Bit 333" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND332  ,Set/Clear Pending Bit 332" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND331  ,Set/Clear Pending Bit 331" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND330  ,Set/Clear Pending Bit 330" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND329  ,Set/Clear Pending Bit 329" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND328  ,Set/Clear Pending Bit 328" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND327  ,Set/Clear Pending Bit 327" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND326  ,Set/Clear Pending Bit 326" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND325  ,Set/Clear Pending Bit 325" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND324  ,Set/Clear Pending Bit 324" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND323  ,Set/Clear Pending Bit 323" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND322  ,Set/Clear Pending Bit 322" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND321  ,Set/Clear Pending Bit 321" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND320  ,Set/Clear Pending Bit 320" "Not pending,Pending"
else
rgroup.long 0x0228++0x03
line.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)
group.long 0x022C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND383  ,Set/Clear Pending Bit 383" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND382  ,Set/Clear Pending Bit 382" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND381  ,Set/Clear Pending Bit 381" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND380  ,Set/Clear Pending Bit 380" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND379  ,Set/Clear Pending Bit 379" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND378  ,Set/Clear Pending Bit 378" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND377  ,Set/Clear Pending Bit 377" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND376  ,Set/Clear Pending Bit 376" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND375  ,Set/Clear Pending Bit 375" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND374  ,Set/Clear Pending Bit 374" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND373  ,Set/Clear Pending Bit 373" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND372  ,Set/Clear Pending Bit 372" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND371  ,Set/Clear Pending Bit 371" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND370  ,Set/Clear Pending Bit 370" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND369  ,Set/Clear Pending Bit 369" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND368  ,Set/Clear Pending Bit 368" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND367  ,Set/Clear Pending Bit 367" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND366  ,Set/Clear Pending Bit 366" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND365  ,Set/Clear Pending Bit 365" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND364  ,Set/Clear Pending Bit 364" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND363  ,Set/Clear Pending Bit 363" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND362  ,Set/Clear Pending Bit 362" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND361  ,Set/Clear Pending Bit 361" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND360  ,Set/Clear Pending Bit 360" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND359  ,Set/Clear Pending Bit 359" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND358  ,Set/Clear Pending Bit 358" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND357  ,Set/Clear Pending Bit 357" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND356  ,Set/Clear Pending Bit 356" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND355  ,Set/Clear Pending Bit 355" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND354  ,Set/Clear Pending Bit 354" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND353  ,Set/Clear Pending Bit 353" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND352  ,Set/Clear Pending Bit 352" "Not pending,Pending"
else
rgroup.long 0x022C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)
group.long 0x0230++0x03
line.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND415  ,Set/Clear Pending Bit 415" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND414  ,Set/Clear Pending Bit 414" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND413  ,Set/Clear Pending Bit 413" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND412  ,Set/Clear Pending Bit 412" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND411  ,Set/Clear Pending Bit 411" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND410  ,Set/Clear Pending Bit 410" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND409  ,Set/Clear Pending Bit 409" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND408  ,Set/Clear Pending Bit 408" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND407  ,Set/Clear Pending Bit 407" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND406  ,Set/Clear Pending Bit 406" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND405  ,Set/Clear Pending Bit 405" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND404  ,Set/Clear Pending Bit 404" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND403  ,Set/Clear Pending Bit 403" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND402  ,Set/Clear Pending Bit 402" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND401  ,Set/Clear Pending Bit 401" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND400  ,Set/Clear Pending Bit 400" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND399  ,Set/Clear Pending Bit 399" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND398  ,Set/Clear Pending Bit 398" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND397  ,Set/Clear Pending Bit 397" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND396  ,Set/Clear Pending Bit 396" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND395  ,Set/Clear Pending Bit 395" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND394  ,Set/Clear Pending Bit 394" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND393  ,Set/Clear Pending Bit 393" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND392  ,Set/Clear Pending Bit 392" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND391  ,Set/Clear Pending Bit 391" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND390  ,Set/Clear Pending Bit 390" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND389  ,Set/Clear Pending Bit 389" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND388  ,Set/Clear Pending Bit 388" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND387  ,Set/Clear Pending Bit 387" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND386  ,Set/Clear Pending Bit 386" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND385  ,Set/Clear Pending Bit 385" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND384  ,Set/Clear Pending Bit 384" "Not pending,Pending"
else
rgroup.long 0x0230++0x03
line.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)
group.long 0x0234++0x03
line.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND447  ,Set/Clear Pending Bit 447" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND446  ,Set/Clear Pending Bit 446" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND445  ,Set/Clear Pending Bit 445" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND444  ,Set/Clear Pending Bit 444" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND443  ,Set/Clear Pending Bit 443" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND442  ,Set/Clear Pending Bit 442" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND441  ,Set/Clear Pending Bit 441" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND440  ,Set/Clear Pending Bit 440" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND439  ,Set/Clear Pending Bit 439" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND438  ,Set/Clear Pending Bit 438" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND437  ,Set/Clear Pending Bit 437" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND436  ,Set/Clear Pending Bit 436" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND435  ,Set/Clear Pending Bit 435" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND434  ,Set/Clear Pending Bit 434" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND433  ,Set/Clear Pending Bit 433" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND432  ,Set/Clear Pending Bit 432" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND431  ,Set/Clear Pending Bit 431" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND430  ,Set/Clear Pending Bit 430" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND429  ,Set/Clear Pending Bit 429" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND428  ,Set/Clear Pending Bit 428" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND427  ,Set/Clear Pending Bit 427" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND426  ,Set/Clear Pending Bit 426" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND425  ,Set/Clear Pending Bit 425" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND424  ,Set/Clear Pending Bit 424" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND423  ,Set/Clear Pending Bit 423" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND422  ,Set/Clear Pending Bit 422" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND421  ,Set/Clear Pending Bit 421" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND420  ,Set/Clear Pending Bit 420" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND419  ,Set/Clear Pending Bit 419" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND418  ,Set/Clear Pending Bit 418" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND417  ,Set/Clear Pending Bit 417" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND416  ,Set/Clear Pending Bit 416" "Not pending,Pending"
else
rgroup.long 0x0234++0x03
line.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)
group.long 0x0238++0x03
line.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND479  ,Set/Clear Pending Bit 479" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND478  ,Set/Clear Pending Bit 478" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND477  ,Set/Clear Pending Bit 477" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND476  ,Set/Clear Pending Bit 476" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND475  ,Set/Clear Pending Bit 475" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND474  ,Set/Clear Pending Bit 474" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND473  ,Set/Clear Pending Bit 473" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND472  ,Set/Clear Pending Bit 472" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND471  ,Set/Clear Pending Bit 471" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND470  ,Set/Clear Pending Bit 470" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND469  ,Set/Clear Pending Bit 469" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND468  ,Set/Clear Pending Bit 468" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND467  ,Set/Clear Pending Bit 467" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND466  ,Set/Clear Pending Bit 466" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND465  ,Set/Clear Pending Bit 465" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND464  ,Set/Clear Pending Bit 464" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND463  ,Set/Clear Pending Bit 463" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND462  ,Set/Clear Pending Bit 462" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND461  ,Set/Clear Pending Bit 461" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND460  ,Set/Clear Pending Bit 460" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND459  ,Set/Clear Pending Bit 459" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND458  ,Set/Clear Pending Bit 458" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND457  ,Set/Clear Pending Bit 457" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND456  ,Set/Clear Pending Bit 456" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND455  ,Set/Clear Pending Bit 455" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND454  ,Set/Clear Pending Bit 454" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND453  ,Set/Clear Pending Bit 453" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND452  ,Set/Clear Pending Bit 452" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND451  ,Set/Clear Pending Bit 451" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND450  ,Set/Clear Pending Bit 450" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND449  ,Set/Clear Pending Bit 449" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND448  ,Set/Clear Pending Bit 448" "Not pending,Pending"
else
rgroup.long 0x0238++0x03
line.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)
group.long 0x023C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND511  ,Set/Clear Pending Bit 511" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND510  ,Set/Clear Pending Bit 510" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND509  ,Set/Clear Pending Bit 509" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND508  ,Set/Clear Pending Bit 508" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND507  ,Set/Clear Pending Bit 507" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND506  ,Set/Clear Pending Bit 506" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND505  ,Set/Clear Pending Bit 505" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND504  ,Set/Clear Pending Bit 504" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND503  ,Set/Clear Pending Bit 503" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND502  ,Set/Clear Pending Bit 502" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND501  ,Set/Clear Pending Bit 501" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND500  ,Set/Clear Pending Bit 500" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND499  ,Set/Clear Pending Bit 499" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND498  ,Set/Clear Pending Bit 498" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND497  ,Set/Clear Pending Bit 497" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND496  ,Set/Clear Pending Bit 496" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND495  ,Set/Clear Pending Bit 495" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND494  ,Set/Clear Pending Bit 494" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND493  ,Set/Clear Pending Bit 493" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND492  ,Set/Clear Pending Bit 492" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND491  ,Set/Clear Pending Bit 491" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND490  ,Set/Clear Pending Bit 490" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND489  ,Set/Clear Pending Bit 489" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND488  ,Set/Clear Pending Bit 488" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND487  ,Set/Clear Pending Bit 487" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND486  ,Set/Clear Pending Bit 486" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND485  ,Set/Clear Pending Bit 485" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND484  ,Set/Clear Pending Bit 484" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND483  ,Set/Clear Pending Bit 483" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND482  ,Set/Clear Pending Bit 482" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND481  ,Set/Clear Pending Bit 481" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND480  ,Set/Clear Pending Bit 480" "Not pending,Pending"
else
rgroup.long 0x023C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)
group.long 0x0240++0x03
line.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND543  ,Set/Clear Pending Bit 543" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND542  ,Set/Clear Pending Bit 542" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND541  ,Set/Clear Pending Bit 541" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND540  ,Set/Clear Pending Bit 540" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND539  ,Set/Clear Pending Bit 539" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND538  ,Set/Clear Pending Bit 538" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND537  ,Set/Clear Pending Bit 537" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND536  ,Set/Clear Pending Bit 536" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND535  ,Set/Clear Pending Bit 535" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND534  ,Set/Clear Pending Bit 534" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND533  ,Set/Clear Pending Bit 533" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND532  ,Set/Clear Pending Bit 532" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND531  ,Set/Clear Pending Bit 531" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND530  ,Set/Clear Pending Bit 530" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND529  ,Set/Clear Pending Bit 529" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND528  ,Set/Clear Pending Bit 528" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND527  ,Set/Clear Pending Bit 527" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND526  ,Set/Clear Pending Bit 526" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND525  ,Set/Clear Pending Bit 525" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND524  ,Set/Clear Pending Bit 524" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND523  ,Set/Clear Pending Bit 523" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND522  ,Set/Clear Pending Bit 522" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND521  ,Set/Clear Pending Bit 521" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND520  ,Set/Clear Pending Bit 520" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND519  ,Set/Clear Pending Bit 519" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND518  ,Set/Clear Pending Bit 518" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND517  ,Set/Clear Pending Bit 517" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND516  ,Set/Clear Pending Bit 516" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND515  ,Set/Clear Pending Bit 515" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND514  ,Set/Clear Pending Bit 514" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND513  ,Set/Clear Pending Bit 513" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND512  ,Set/Clear Pending Bit 512" "Not pending,Pending"
else
rgroup.long 0x0240++0x03
line.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)
group.long 0x0244++0x03
line.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND575  ,Set/Clear Pending Bit 575" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND574  ,Set/Clear Pending Bit 574" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND573  ,Set/Clear Pending Bit 573" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND572  ,Set/Clear Pending Bit 572" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND571  ,Set/Clear Pending Bit 571" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND570  ,Set/Clear Pending Bit 570" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND569  ,Set/Clear Pending Bit 569" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND568  ,Set/Clear Pending Bit 568" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND567  ,Set/Clear Pending Bit 567" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND566  ,Set/Clear Pending Bit 566" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND565  ,Set/Clear Pending Bit 565" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND564  ,Set/Clear Pending Bit 564" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND563  ,Set/Clear Pending Bit 563" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND562  ,Set/Clear Pending Bit 562" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND561  ,Set/Clear Pending Bit 561" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND560  ,Set/Clear Pending Bit 560" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND559  ,Set/Clear Pending Bit 559" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND558  ,Set/Clear Pending Bit 558" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND557  ,Set/Clear Pending Bit 557" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND556  ,Set/Clear Pending Bit 556" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND555  ,Set/Clear Pending Bit 555" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND554  ,Set/Clear Pending Bit 554" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND553  ,Set/Clear Pending Bit 553" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND552  ,Set/Clear Pending Bit 552" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND551  ,Set/Clear Pending Bit 551" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND550  ,Set/Clear Pending Bit 550" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND549  ,Set/Clear Pending Bit 549" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND548  ,Set/Clear Pending Bit 548" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND547  ,Set/Clear Pending Bit 547" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND546  ,Set/Clear Pending Bit 546" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND545  ,Set/Clear Pending Bit 545" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND544  ,Set/Clear Pending Bit 544" "Not pending,Pending"
else
rgroup.long 0x0244++0x03
line.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)
group.long 0x0248++0x03
line.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND607  ,Set/Clear Pending Bit 607" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND606  ,Set/Clear Pending Bit 606" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND605  ,Set/Clear Pending Bit 605" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND604  ,Set/Clear Pending Bit 604" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND603  ,Set/Clear Pending Bit 603" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND602  ,Set/Clear Pending Bit 602" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND601  ,Set/Clear Pending Bit 601" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND600  ,Set/Clear Pending Bit 600" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND599  ,Set/Clear Pending Bit 599" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND598  ,Set/Clear Pending Bit 598" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND597  ,Set/Clear Pending Bit 597" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND596  ,Set/Clear Pending Bit 596" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND595  ,Set/Clear Pending Bit 595" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND594  ,Set/Clear Pending Bit 594" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND593  ,Set/Clear Pending Bit 593" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND592  ,Set/Clear Pending Bit 592" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND591  ,Set/Clear Pending Bit 591" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND590  ,Set/Clear Pending Bit 590" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND589  ,Set/Clear Pending Bit 589" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND588  ,Set/Clear Pending Bit 588" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND587  ,Set/Clear Pending Bit 587" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND586  ,Set/Clear Pending Bit 586" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND585  ,Set/Clear Pending Bit 585" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND584  ,Set/Clear Pending Bit 584" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND583  ,Set/Clear Pending Bit 583" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND582  ,Set/Clear Pending Bit 582" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND581  ,Set/Clear Pending Bit 581" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND580  ,Set/Clear Pending Bit 580" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND579  ,Set/Clear Pending Bit 579" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND578  ,Set/Clear Pending Bit 578" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND577  ,Set/Clear Pending Bit 577" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND576  ,Set/Clear Pending Bit 576" "Not pending,Pending"
else
rgroup.long 0x0248++0x03
line.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)
group.long 0x024C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND639  ,Set/Clear Pending Bit 639" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND638  ,Set/Clear Pending Bit 638" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND637  ,Set/Clear Pending Bit 637" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND636  ,Set/Clear Pending Bit 636" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND635  ,Set/Clear Pending Bit 635" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND634  ,Set/Clear Pending Bit 634" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND633  ,Set/Clear Pending Bit 633" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND632  ,Set/Clear Pending Bit 632" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND631  ,Set/Clear Pending Bit 631" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND630  ,Set/Clear Pending Bit 630" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND629  ,Set/Clear Pending Bit 629" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND628  ,Set/Clear Pending Bit 628" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND627  ,Set/Clear Pending Bit 627" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND626  ,Set/Clear Pending Bit 626" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND625  ,Set/Clear Pending Bit 625" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND624  ,Set/Clear Pending Bit 624" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND623  ,Set/Clear Pending Bit 623" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND622  ,Set/Clear Pending Bit 622" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND621  ,Set/Clear Pending Bit 621" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND620  ,Set/Clear Pending Bit 620" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND619  ,Set/Clear Pending Bit 619" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND618  ,Set/Clear Pending Bit 618" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND617  ,Set/Clear Pending Bit 617" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND616  ,Set/Clear Pending Bit 616" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND615  ,Set/Clear Pending Bit 615" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND614  ,Set/Clear Pending Bit 614" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND613  ,Set/Clear Pending Bit 613" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND612  ,Set/Clear Pending Bit 612" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND611  ,Set/Clear Pending Bit 611" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND610  ,Set/Clear Pending Bit 610" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND609  ,Set/Clear Pending Bit 609" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND608  ,Set/Clear Pending Bit 608" "Not pending,Pending"
else
rgroup.long 0x024C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)
group.long 0x0250++0x03
line.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND671  ,Set/Clear Pending Bit 671" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND670  ,Set/Clear Pending Bit 670" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND669  ,Set/Clear Pending Bit 669" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND668  ,Set/Clear Pending Bit 668" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND667  ,Set/Clear Pending Bit 667" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND666  ,Set/Clear Pending Bit 666" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND665  ,Set/Clear Pending Bit 665" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND664  ,Set/Clear Pending Bit 664" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND663  ,Set/Clear Pending Bit 663" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND662  ,Set/Clear Pending Bit 662" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND661  ,Set/Clear Pending Bit 661" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND660  ,Set/Clear Pending Bit 660" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND659  ,Set/Clear Pending Bit 659" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND658  ,Set/Clear Pending Bit 658" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND657  ,Set/Clear Pending Bit 657" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND656  ,Set/Clear Pending Bit 656" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND655  ,Set/Clear Pending Bit 655" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND654  ,Set/Clear Pending Bit 654" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND653  ,Set/Clear Pending Bit 653" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND652  ,Set/Clear Pending Bit 652" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND651  ,Set/Clear Pending Bit 651" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND650  ,Set/Clear Pending Bit 650" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND649  ,Set/Clear Pending Bit 649" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND648  ,Set/Clear Pending Bit 648" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND647  ,Set/Clear Pending Bit 647" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND646  ,Set/Clear Pending Bit 646" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND645  ,Set/Clear Pending Bit 645" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND644  ,Set/Clear Pending Bit 644" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND643  ,Set/Clear Pending Bit 643" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND642  ,Set/Clear Pending Bit 642" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND641  ,Set/Clear Pending Bit 641" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND640  ,Set/Clear Pending Bit 640" "Not pending,Pending"
else
rgroup.long 0x0250++0x03
line.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)
group.long 0x0254++0x03
line.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND703  ,Set/Clear Pending Bit 703" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND702  ,Set/Clear Pending Bit 702" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND701  ,Set/Clear Pending Bit 701" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND700  ,Set/Clear Pending Bit 700" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND699  ,Set/Clear Pending Bit 699" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND698  ,Set/Clear Pending Bit 698" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND697  ,Set/Clear Pending Bit 697" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND696  ,Set/Clear Pending Bit 696" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND695  ,Set/Clear Pending Bit 695" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND694  ,Set/Clear Pending Bit 694" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND693  ,Set/Clear Pending Bit 693" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND692  ,Set/Clear Pending Bit 692" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND691  ,Set/Clear Pending Bit 691" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND690  ,Set/Clear Pending Bit 690" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND689  ,Set/Clear Pending Bit 689" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND688  ,Set/Clear Pending Bit 688" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND687  ,Set/Clear Pending Bit 687" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND686  ,Set/Clear Pending Bit 686" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND685  ,Set/Clear Pending Bit 685" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND684  ,Set/Clear Pending Bit 684" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND683  ,Set/Clear Pending Bit 683" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND682  ,Set/Clear Pending Bit 682" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND681  ,Set/Clear Pending Bit 681" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND680  ,Set/Clear Pending Bit 680" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND679  ,Set/Clear Pending Bit 679" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND678  ,Set/Clear Pending Bit 678" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND677  ,Set/Clear Pending Bit 677" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND676  ,Set/Clear Pending Bit 676" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND675  ,Set/Clear Pending Bit 675" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND674  ,Set/Clear Pending Bit 674" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND673  ,Set/Clear Pending Bit 673" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND672  ,Set/Clear Pending Bit 672" "Not pending,Pending"
else
rgroup.long 0x0254++0x03
line.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)
group.long 0x0258++0x03
line.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND735  ,Set/Clear Pending Bit 735" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND734  ,Set/Clear Pending Bit 734" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND733  ,Set/Clear Pending Bit 733" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND732  ,Set/Clear Pending Bit 732" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND731  ,Set/Clear Pending Bit 731" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND730  ,Set/Clear Pending Bit 730" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND729  ,Set/Clear Pending Bit 729" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND728  ,Set/Clear Pending Bit 728" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND727  ,Set/Clear Pending Bit 727" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND726  ,Set/Clear Pending Bit 726" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND725  ,Set/Clear Pending Bit 725" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND724  ,Set/Clear Pending Bit 724" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND723  ,Set/Clear Pending Bit 723" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND722  ,Set/Clear Pending Bit 722" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND721  ,Set/Clear Pending Bit 721" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND720  ,Set/Clear Pending Bit 720" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND719  ,Set/Clear Pending Bit 719" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND718  ,Set/Clear Pending Bit 718" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND717  ,Set/Clear Pending Bit 717" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND716  ,Set/Clear Pending Bit 716" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND715  ,Set/Clear Pending Bit 715" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND714  ,Set/Clear Pending Bit 714" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND713  ,Set/Clear Pending Bit 713" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND712  ,Set/Clear Pending Bit 712" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND711  ,Set/Clear Pending Bit 711" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND710  ,Set/Clear Pending Bit 710" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND709  ,Set/Clear Pending Bit 709" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND708  ,Set/Clear Pending Bit 708" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND707  ,Set/Clear Pending Bit 707" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND706  ,Set/Clear Pending Bit 706" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND705  ,Set/Clear Pending Bit 705" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND704  ,Set/Clear Pending Bit 704" "Not pending,Pending"
else
rgroup.long 0x0258++0x03
line.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)
group.long 0x025C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND767  ,Set/Clear Pending Bit 767" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND766  ,Set/Clear Pending Bit 766" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND765  ,Set/Clear Pending Bit 765" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND764  ,Set/Clear Pending Bit 764" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND763  ,Set/Clear Pending Bit 763" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND762  ,Set/Clear Pending Bit 762" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND761  ,Set/Clear Pending Bit 761" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND760  ,Set/Clear Pending Bit 760" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND759  ,Set/Clear Pending Bit 759" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND758  ,Set/Clear Pending Bit 758" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND757  ,Set/Clear Pending Bit 757" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND756  ,Set/Clear Pending Bit 756" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND755  ,Set/Clear Pending Bit 755" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND754  ,Set/Clear Pending Bit 754" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND753  ,Set/Clear Pending Bit 753" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND752  ,Set/Clear Pending Bit 752" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND751  ,Set/Clear Pending Bit 751" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND750  ,Set/Clear Pending Bit 750" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND749  ,Set/Clear Pending Bit 749" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND748  ,Set/Clear Pending Bit 748" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND747  ,Set/Clear Pending Bit 747" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND746  ,Set/Clear Pending Bit 746" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND745  ,Set/Clear Pending Bit 745" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND744  ,Set/Clear Pending Bit 744" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND743  ,Set/Clear Pending Bit 743" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND742  ,Set/Clear Pending Bit 742" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND741  ,Set/Clear Pending Bit 741" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND740  ,Set/Clear Pending Bit 740" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND739  ,Set/Clear Pending Bit 739" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND738  ,Set/Clear Pending Bit 738" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND737  ,Set/Clear Pending Bit 737" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND736  ,Set/Clear Pending Bit 736" "Not pending,Pending"
else
rgroup.long 0x025C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)
group.long 0x0260++0x03
line.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND799  ,Set/Clear Pending Bit 799" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND798  ,Set/Clear Pending Bit 798" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND797  ,Set/Clear Pending Bit 797" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND796  ,Set/Clear Pending Bit 796" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND795  ,Set/Clear Pending Bit 795" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND794  ,Set/Clear Pending Bit 794" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND793  ,Set/Clear Pending Bit 793" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND792  ,Set/Clear Pending Bit 792" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND791  ,Set/Clear Pending Bit 791" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND790  ,Set/Clear Pending Bit 790" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND789  ,Set/Clear Pending Bit 789" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND788  ,Set/Clear Pending Bit 788" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND787  ,Set/Clear Pending Bit 787" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND786  ,Set/Clear Pending Bit 786" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND785  ,Set/Clear Pending Bit 785" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND784  ,Set/Clear Pending Bit 784" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND783  ,Set/Clear Pending Bit 783" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND782  ,Set/Clear Pending Bit 782" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND781  ,Set/Clear Pending Bit 781" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND780  ,Set/Clear Pending Bit 780" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND779  ,Set/Clear Pending Bit 779" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND778  ,Set/Clear Pending Bit 778" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND777  ,Set/Clear Pending Bit 777" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND776  ,Set/Clear Pending Bit 776" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND775  ,Set/Clear Pending Bit 775" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND774  ,Set/Clear Pending Bit 774" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND773  ,Set/Clear Pending Bit 773" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND772  ,Set/Clear Pending Bit 772" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND771  ,Set/Clear Pending Bit 771" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND770  ,Set/Clear Pending Bit 770" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND769  ,Set/Clear Pending Bit 769" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND768  ,Set/Clear Pending Bit 768" "Not pending,Pending"
else
rgroup.long 0x0260++0x03
line.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)
group.long 0x0264++0x03
line.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND831  ,Set/Clear Pending Bit 831" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND830  ,Set/Clear Pending Bit 830" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND829  ,Set/Clear Pending Bit 829" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND828  ,Set/Clear Pending Bit 828" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND827  ,Set/Clear Pending Bit 827" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND826  ,Set/Clear Pending Bit 826" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND825  ,Set/Clear Pending Bit 825" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND824  ,Set/Clear Pending Bit 824" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND823  ,Set/Clear Pending Bit 823" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND822  ,Set/Clear Pending Bit 822" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND821  ,Set/Clear Pending Bit 821" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND820  ,Set/Clear Pending Bit 820" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND819  ,Set/Clear Pending Bit 819" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND818  ,Set/Clear Pending Bit 818" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND817  ,Set/Clear Pending Bit 817" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND816  ,Set/Clear Pending Bit 816" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND815  ,Set/Clear Pending Bit 815" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND814  ,Set/Clear Pending Bit 814" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND813  ,Set/Clear Pending Bit 813" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND812  ,Set/Clear Pending Bit 812" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND811  ,Set/Clear Pending Bit 811" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND810  ,Set/Clear Pending Bit 810" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND809  ,Set/Clear Pending Bit 809" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND808  ,Set/Clear Pending Bit 808" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND807  ,Set/Clear Pending Bit 807" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND806  ,Set/Clear Pending Bit 806" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND805  ,Set/Clear Pending Bit 805" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND804  ,Set/Clear Pending Bit 804" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND803  ,Set/Clear Pending Bit 803" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND802  ,Set/Clear Pending Bit 802" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND801  ,Set/Clear Pending Bit 801" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND800  ,Set/Clear Pending Bit 800" "Not pending,Pending"
else
rgroup.long 0x0264++0x03
line.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)
group.long 0x0268++0x03
line.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND863  ,Set/Clear Pending Bit 863" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND862  ,Set/Clear Pending Bit 862" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND861  ,Set/Clear Pending Bit 861" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND860  ,Set/Clear Pending Bit 860" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND859  ,Set/Clear Pending Bit 859" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND858  ,Set/Clear Pending Bit 858" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND857  ,Set/Clear Pending Bit 857" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND856  ,Set/Clear Pending Bit 856" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND855  ,Set/Clear Pending Bit 855" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND854  ,Set/Clear Pending Bit 854" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND853  ,Set/Clear Pending Bit 853" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND852  ,Set/Clear Pending Bit 852" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND851  ,Set/Clear Pending Bit 851" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND850  ,Set/Clear Pending Bit 850" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND849  ,Set/Clear Pending Bit 849" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND848  ,Set/Clear Pending Bit 848" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND847  ,Set/Clear Pending Bit 847" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND846  ,Set/Clear Pending Bit 846" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND845  ,Set/Clear Pending Bit 845" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND844  ,Set/Clear Pending Bit 844" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND843  ,Set/Clear Pending Bit 843" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND842  ,Set/Clear Pending Bit 842" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND841  ,Set/Clear Pending Bit 841" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND840  ,Set/Clear Pending Bit 840" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND839  ,Set/Clear Pending Bit 839" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND838  ,Set/Clear Pending Bit 838" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND837  ,Set/Clear Pending Bit 837" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND836  ,Set/Clear Pending Bit 836" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND835  ,Set/Clear Pending Bit 835" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND834  ,Set/Clear Pending Bit 834" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND833  ,Set/Clear Pending Bit 833" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND832  ,Set/Clear Pending Bit 832" "Not pending,Pending"
else
rgroup.long 0x0268++0x03
line.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)
group.long 0x026C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND895  ,Set/Clear Pending Bit 895" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND894  ,Set/Clear Pending Bit 894" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND893  ,Set/Clear Pending Bit 893" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND892  ,Set/Clear Pending Bit 892" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND891  ,Set/Clear Pending Bit 891" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND890  ,Set/Clear Pending Bit 890" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND889  ,Set/Clear Pending Bit 889" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND888  ,Set/Clear Pending Bit 888" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND887  ,Set/Clear Pending Bit 887" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND886  ,Set/Clear Pending Bit 886" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND885  ,Set/Clear Pending Bit 885" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND884  ,Set/Clear Pending Bit 884" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND883  ,Set/Clear Pending Bit 883" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND882  ,Set/Clear Pending Bit 882" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND881  ,Set/Clear Pending Bit 881" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND880  ,Set/Clear Pending Bit 880" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND879  ,Set/Clear Pending Bit 879" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND878  ,Set/Clear Pending Bit 878" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND877  ,Set/Clear Pending Bit 877" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND876  ,Set/Clear Pending Bit 876" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND875  ,Set/Clear Pending Bit 875" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND874  ,Set/Clear Pending Bit 874" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND873  ,Set/Clear Pending Bit 873" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND872  ,Set/Clear Pending Bit 872" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND871  ,Set/Clear Pending Bit 871" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND870  ,Set/Clear Pending Bit 870" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND869  ,Set/Clear Pending Bit 869" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND868  ,Set/Clear Pending Bit 868" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND867  ,Set/Clear Pending Bit 867" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND866  ,Set/Clear Pending Bit 866" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND865  ,Set/Clear Pending Bit 865" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND864  ,Set/Clear Pending Bit 864" "Not pending,Pending"
else
rgroup.long 0x026C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)
group.long 0x0270++0x03
line.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND927  ,Set/Clear Pending Bit 927" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND926  ,Set/Clear Pending Bit 926" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND925  ,Set/Clear Pending Bit 925" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND924  ,Set/Clear Pending Bit 924" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND923  ,Set/Clear Pending Bit 923" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND922  ,Set/Clear Pending Bit 922" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND921  ,Set/Clear Pending Bit 921" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND920  ,Set/Clear Pending Bit 920" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND919  ,Set/Clear Pending Bit 919" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND918  ,Set/Clear Pending Bit 918" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND917  ,Set/Clear Pending Bit 917" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND916  ,Set/Clear Pending Bit 916" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND915  ,Set/Clear Pending Bit 915" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND914  ,Set/Clear Pending Bit 914" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND913  ,Set/Clear Pending Bit 913" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND912  ,Set/Clear Pending Bit 912" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND911  ,Set/Clear Pending Bit 911" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND910  ,Set/Clear Pending Bit 910" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND909  ,Set/Clear Pending Bit 909" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND908  ,Set/Clear Pending Bit 908" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND907  ,Set/Clear Pending Bit 907" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND906  ,Set/Clear Pending Bit 906" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND905  ,Set/Clear Pending Bit 905" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND904  ,Set/Clear Pending Bit 904" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND903  ,Set/Clear Pending Bit 903" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND902  ,Set/Clear Pending Bit 902" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND901  ,Set/Clear Pending Bit 901" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND900  ,Set/Clear Pending Bit 900" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND899  ,Set/Clear Pending Bit 899" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND898  ,Set/Clear Pending Bit 898" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND897  ,Set/Clear Pending Bit 897" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND896  ,Set/Clear Pending Bit 896" "Not pending,Pending"
else
rgroup.long 0x0270++0x03
line.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)
group.long 0x0274++0x03
line.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND959  ,Set/Clear Pending Bit 959" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND958  ,Set/Clear Pending Bit 958" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND957  ,Set/Clear Pending Bit 957" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND956  ,Set/Clear Pending Bit 956" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND955  ,Set/Clear Pending Bit 955" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND954  ,Set/Clear Pending Bit 954" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND953  ,Set/Clear Pending Bit 953" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND952  ,Set/Clear Pending Bit 952" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND951  ,Set/Clear Pending Bit 951" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND950  ,Set/Clear Pending Bit 950" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND949  ,Set/Clear Pending Bit 949" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND948  ,Set/Clear Pending Bit 948" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND947  ,Set/Clear Pending Bit 947" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND946  ,Set/Clear Pending Bit 946" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND945  ,Set/Clear Pending Bit 945" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND944  ,Set/Clear Pending Bit 944" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND943  ,Set/Clear Pending Bit 943" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND942  ,Set/Clear Pending Bit 942" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND941  ,Set/Clear Pending Bit 941" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND940  ,Set/Clear Pending Bit 940" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND939  ,Set/Clear Pending Bit 939" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND938  ,Set/Clear Pending Bit 938" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND937  ,Set/Clear Pending Bit 937" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND936  ,Set/Clear Pending Bit 936" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND935  ,Set/Clear Pending Bit 935" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND934  ,Set/Clear Pending Bit 934" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND933  ,Set/Clear Pending Bit 933" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND932  ,Set/Clear Pending Bit 932" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND931  ,Set/Clear Pending Bit 931" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND930  ,Set/Clear Pending Bit 930" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND929  ,Set/Clear Pending Bit 929" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND928  ,Set/Clear Pending Bit 928" "Not pending,Pending"
else
rgroup.long 0x0274++0x03
line.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)
group.long 0x0278++0x03
line.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND991  ,Set/Clear Pending Bit 991" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND990  ,Set/Clear Pending Bit 990" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND989  ,Set/Clear Pending Bit 989" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND988  ,Set/Clear Pending Bit 988" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND987  ,Set/Clear Pending Bit 987" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND986  ,Set/Clear Pending Bit 986" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND985  ,Set/Clear Pending Bit 985" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND984  ,Set/Clear Pending Bit 984" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND983  ,Set/Clear Pending Bit 983" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND982  ,Set/Clear Pending Bit 982" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND981  ,Set/Clear Pending Bit 981" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND980  ,Set/Clear Pending Bit 980" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND979  ,Set/Clear Pending Bit 979" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND978  ,Set/Clear Pending Bit 978" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND977  ,Set/Clear Pending Bit 977" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND976  ,Set/Clear Pending Bit 976" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND975  ,Set/Clear Pending Bit 975" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND974  ,Set/Clear Pending Bit 974" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND973  ,Set/Clear Pending Bit 973" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND972  ,Set/Clear Pending Bit 972" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND971  ,Set/Clear Pending Bit 971" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND970  ,Set/Clear Pending Bit 970" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND969  ,Set/Clear Pending Bit 969" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND968  ,Set/Clear Pending Bit 968" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND967  ,Set/Clear Pending Bit 967" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND966  ,Set/Clear Pending Bit 966" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND965  ,Set/Clear Pending Bit 965" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND964  ,Set/Clear Pending Bit 964" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND963  ,Set/Clear Pending Bit 963" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND962  ,Set/Clear Pending Bit 962" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND961  ,Set/Clear Pending Bit 961" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND960  ,Set/Clear Pending Bit 960" "Not pending,Pending"
else
rgroup.long 0x0278++0x03
line.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)==0x1F)
group.long 0x027C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR31,Interrupt Set/Clear Pending Register 31"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND1019 ,Set/Clear Pending Bit 1019" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND1018 ,Set/Clear Pending Bit 1018" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND1017 ,Set/Clear Pending Bit 1017" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND1016 ,Set/Clear Pending Bit 1016" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND1015 ,Set/Clear Pending Bit 1015" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND1014 ,Set/Clear Pending Bit 1014" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND1013 ,Set/Clear Pending Bit 1013" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND1012 ,Set/Clear Pending Bit 1012" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND1011 ,Set/Clear Pending Bit 1011" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND1010 ,Set/Clear Pending Bit 1010" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND1009 ,Set/Clear Pending Bit 1009" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND1008 ,Set/Clear Pending Bit 1008" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND1007 ,Set/Clear Pending Bit 1007" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND1006 ,Set/Clear Pending Bit 1006" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND1005 ,Set/Clear Pending Bit 1005" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND1004 ,Set/Clear Pending Bit 1004" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND1003 ,Set/Clear Pending Bit 1003" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND1002 ,Set/Clear Pending Bit 1002" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND1001 ,Set/Clear Pending Bit 1001" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND1000 ,Set/Clear Pending Bit 1000" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND999  ,Set/Clear Pending Bit 999" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND998  ,Set/Clear Pending Bit 998" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND997  ,Set/Clear Pending Bit 997" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND996  ,Set/Clear Pending Bit 996" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND995  ,Set/Clear Pending Bit 995" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND994  ,Set/Clear Pending Bit 994" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND993  ,Set/Clear Pending Bit 993" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND992  ,Set/Clear Pending Bit 992" "Not pending,Pending"
else
rgroup.long 0x027C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR31,Interrupt Set/Clear Pending Register 31"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
tree.end
width 24.
tree "Set/Clear Active Registers"
if (((per.l(ad:0xFFFC1000+0x08))&0xFF000000)==(0x0000000||0x1000000))
rgroup.long 0x0300++0x03
line.long 0x0 "GICD_ICDABR0,Active Status Register 0"
bitfld.long 0x00 31. " ASB31   ,Active Status Bit 31" "Not active,Active"
bitfld.long 0x00 30. "  ASB30   ,Active Status Bit 30" "Not active,Active"
bitfld.long 0x00 29. "  ASB29   ,Active Status Bit 29" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB28   ,Active Status Bit 28" "Not active,Active"
bitfld.long 0x00 27. "  ASB27   ,Active Status Bit 27" "Not active,Active"
bitfld.long 0x00 26. "  ASB26   ,Active Status Bit 26" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB25   ,Active Status Bit 25" "Not active,Active"
bitfld.long 0x00 24. "  ASB24   ,Active Status Bit 24" "Not active,Active"
bitfld.long 0x00 23. "  ASB23   ,Active Status Bit 23" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB22   ,Active Status Bit 22" "Not active,Active"
bitfld.long 0x00 21. "  ASB21   ,Active Status Bit 21" "Not active,Active"
bitfld.long 0x00 20. "  ASB20   ,Active Status Bit 20" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB19   ,Active Status Bit 19" "Not active,Active"
bitfld.long 0x00 18. "  ASB18   ,Active Status Bit 18" "Not active,Active"
bitfld.long 0x00 17. "  ASB17   ,Active Status Bit 17" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB16   ,Active Status Bit 16" "Not active,Active"
bitfld.long 0x00 15. "  ASB15   ,Active Status Bit 15" "Not active,Active"
bitfld.long 0x00 14. "  ASB14   ,Active Status Bit 14" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB13   ,Active Status Bit 13" "Not active,Active"
bitfld.long 0x00 12. "  ASB12   ,Active Status Bit 12" "Not active,Active"
bitfld.long 0x00 11. "  ASB11   ,Active Status Bit 11" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB10   ,Active Status Bit 10" "Not active,Active"
bitfld.long 0x00 9. "  ASB9    ,Active Status Bit 9" "Not active,Active"
bitfld.long 0x00 8. "  ASB8    ,Active Status Bit 8" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB7    ,Active Status Bit 7" "Not active,Active"
bitfld.long 0x00 6. "  ASB6    ,Active Status Bit 6" "Not active,Active"
bitfld.long 0x00 5. "  ASB5    ,Active Status Bit 5" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB4    ,Active Status Bit 4" "Not active,Active"
bitfld.long 0x00 3. "  ASB3    ,Active Status Bit 3" "Not active,Active"
bitfld.long 0x00 2. "  ASB2    ,Active Status Bit 2" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB1    ,Active Status Bit 1" "Not active,Active"
bitfld.long 0x00 0. "  ASB0    ,Active Status Bit 0" "Not active,Active"
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)
rgroup.long 0x0304++0x03
line.long 0x0 "GICD_ICDABR1,Active Status Register 1"
bitfld.long 0x00 31. " ASB63   ,Active Status Bit 63" "Not active,Active"
bitfld.long 0x00 30. "  ASB62   ,Active Status Bit 62" "Not active,Active"
bitfld.long 0x00 29. "  ASB61   ,Active Status Bit 61" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB60   ,Active Status Bit 60" "Not active,Active"
bitfld.long 0x00 27. "  ASB59   ,Active Status Bit 59" "Not active,Active"
bitfld.long 0x00 26. "  ASB58   ,Active Status Bit 58" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB57   ,Active Status Bit 57" "Not active,Active"
bitfld.long 0x00 24. "  ASB56   ,Active Status Bit 56" "Not active,Active"
bitfld.long 0x00 23. "  ASB55   ,Active Status Bit 55" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB54   ,Active Status Bit 54" "Not active,Active"
bitfld.long 0x00 21. "  ASB53   ,Active Status Bit 53" "Not active,Active"
bitfld.long 0x00 20. "  ASB52   ,Active Status Bit 52" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB51   ,Active Status Bit 51" "Not active,Active"
bitfld.long 0x00 18. "  ASB50   ,Active Status Bit 50" "Not active,Active"
bitfld.long 0x00 17. "  ASB49   ,Active Status Bit 49" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB48   ,Active Status Bit 48" "Not active,Active"
bitfld.long 0x00 15. "  ASB47   ,Active Status Bit 47" "Not active,Active"
bitfld.long 0x00 14. "  ASB46   ,Active Status Bit 46" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB45   ,Active Status Bit 45" "Not active,Active"
bitfld.long 0x00 12. "  ASB44   ,Active Status Bit 44" "Not active,Active"
bitfld.long 0x00 11. "  ASB43   ,Active Status Bit 43" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB42   ,Active Status Bit 42" "Not active,Active"
bitfld.long 0x00 9. "  ASB41   ,Active Status Bit 41" "Not active,Active"
bitfld.long 0x00 8. "  ASB40   ,Active Status Bit 40" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB39   ,Active Status Bit 39" "Not active,Active"
bitfld.long 0x00 6. "  ASB38   ,Active Status Bit 38" "Not active,Active"
bitfld.long 0x00 5. "  ASB37   ,Active Status Bit 37" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB36   ,Active Status Bit 36" "Not active,Active"
bitfld.long 0x00 3. "  ASB35   ,Active Status Bit 35" "Not active,Active"
bitfld.long 0x00 2. "  ASB34   ,Active Status Bit 34" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB33   ,Active Status Bit 33" "Not active,Active"
bitfld.long 0x00 0. "  ASB32   ,Active Status Bit 32" "Not active,Active"
else
rgroup.long 0x0304++0x03
line.long 0x0 "GICD_ICDABR1,Active Status Register 1"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)
rgroup.long 0x0308++0x03
line.long 0x0 "GICD_ICDABR2,Active Status Register 2"
bitfld.long 0x00 31. " ASB95   ,Active Status Bit 95" "Not active,Active"
bitfld.long 0x00 30. "  ASB94   ,Active Status Bit 94" "Not active,Active"
bitfld.long 0x00 29. "  ASB93   ,Active Status Bit 93" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB92   ,Active Status Bit 92" "Not active,Active"
bitfld.long 0x00 27. "  ASB91   ,Active Status Bit 91" "Not active,Active"
bitfld.long 0x00 26. "  ASB90   ,Active Status Bit 90" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB89   ,Active Status Bit 89" "Not active,Active"
bitfld.long 0x00 24. "  ASB88   ,Active Status Bit 88" "Not active,Active"
bitfld.long 0x00 23. "  ASB87   ,Active Status Bit 87" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB86   ,Active Status Bit 86" "Not active,Active"
bitfld.long 0x00 21. "  ASB85   ,Active Status Bit 85" "Not active,Active"
bitfld.long 0x00 20. "  ASB84   ,Active Status Bit 84" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB83   ,Active Status Bit 83" "Not active,Active"
bitfld.long 0x00 18. "  ASB82   ,Active Status Bit 82" "Not active,Active"
bitfld.long 0x00 17. "  ASB81   ,Active Status Bit 81" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB80   ,Active Status Bit 80" "Not active,Active"
bitfld.long 0x00 15. "  ASB79   ,Active Status Bit 79" "Not active,Active"
bitfld.long 0x00 14. "  ASB78   ,Active Status Bit 78" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB77   ,Active Status Bit 77" "Not active,Active"
bitfld.long 0x00 12. "  ASB76   ,Active Status Bit 76" "Not active,Active"
bitfld.long 0x00 11. "  ASB75   ,Active Status Bit 75" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB74   ,Active Status Bit 74" "Not active,Active"
bitfld.long 0x00 9. "  ASB73   ,Active Status Bit 73" "Not active,Active"
bitfld.long 0x00 8. "  ASB72   ,Active Status Bit 72" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB71   ,Active Status Bit 71" "Not active,Active"
bitfld.long 0x00 6. "  ASB70   ,Active Status Bit 70" "Not active,Active"
bitfld.long 0x00 5. "  ASB69   ,Active Status Bit 69" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB68   ,Active Status Bit 68" "Not active,Active"
bitfld.long 0x00 3. "  ASB67   ,Active Status Bit 67" "Not active,Active"
bitfld.long 0x00 2. "  ASB66   ,Active Status Bit 66" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB65   ,Active Status Bit 65" "Not active,Active"
bitfld.long 0x00 0. "  ASB64   ,Active Status Bit 64" "Not active,Active"
else
rgroup.long 0x0308++0x03
line.long 0x0 "GICD_ICDABR2,Active Status Register 2"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)
rgroup.long 0x030C++0x03
line.long 0x0 "GICD_ICDABR3,Active Status Register 3"
bitfld.long 0x00 31. " ASB127  ,Active Status Bit 127" "Not active,Active"
bitfld.long 0x00 30. "  ASB126  ,Active Status Bit 126" "Not active,Active"
bitfld.long 0x00 29. "  ASB125  ,Active Status Bit 125" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB124  ,Active Status Bit 124" "Not active,Active"
bitfld.long 0x00 27. "  ASB123  ,Active Status Bit 123" "Not active,Active"
bitfld.long 0x00 26. "  ASB122  ,Active Status Bit 122" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB121  ,Active Status Bit 121" "Not active,Active"
bitfld.long 0x00 24. "  ASB120  ,Active Status Bit 120" "Not active,Active"
bitfld.long 0x00 23. "  ASB119  ,Active Status Bit 119" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB118  ,Active Status Bit 118" "Not active,Active"
bitfld.long 0x00 21. "  ASB117  ,Active Status Bit 117" "Not active,Active"
bitfld.long 0x00 20. "  ASB116  ,Active Status Bit 116" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB115  ,Active Status Bit 115" "Not active,Active"
bitfld.long 0x00 18. "  ASB114  ,Active Status Bit 114" "Not active,Active"
bitfld.long 0x00 17. "  ASB113  ,Active Status Bit 113" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB112  ,Active Status Bit 112" "Not active,Active"
bitfld.long 0x00 15. "  ASB111  ,Active Status Bit 111" "Not active,Active"
bitfld.long 0x00 14. "  ASB110  ,Active Status Bit 110" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB109  ,Active Status Bit 109" "Not active,Active"
bitfld.long 0x00 12. "  ASB108  ,Active Status Bit 108" "Not active,Active"
bitfld.long 0x00 11. "  ASB107  ,Active Status Bit 107" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB106  ,Active Status Bit 106" "Not active,Active"
bitfld.long 0x00 9. "  ASB105  ,Active Status Bit 105" "Not active,Active"
bitfld.long 0x00 8. "  ASB104  ,Active Status Bit 104" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB103  ,Active Status Bit 103" "Not active,Active"
bitfld.long 0x00 6. "  ASB102  ,Active Status Bit 102" "Not active,Active"
bitfld.long 0x00 5. "  ASB101  ,Active Status Bit 101" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB100  ,Active Status Bit 100" "Not active,Active"
bitfld.long 0x00 3. "  ASB99   ,Active Status Bit 99" "Not active,Active"
bitfld.long 0x00 2. "  ASB98   ,Active Status Bit 98" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB97   ,Active Status Bit 97" "Not active,Active"
bitfld.long 0x00 0. "  ASB96   ,Active Status Bit 96" "Not active,Active"
else
rgroup.long 0x030C++0x03
line.long 0x0 "GICD_ICDABR3,Active Status Register 3"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)
rgroup.long 0x0310++0x03
line.long 0x0 "GICD_ICDABR4,Active Status Register 4"
bitfld.long 0x00 31. " ASB159  ,Active Status Bit 159" "Not active,Active"
bitfld.long 0x00 30. "  ASB158  ,Active Status Bit 158" "Not active,Active"
bitfld.long 0x00 29. "  ASB157  ,Active Status Bit 157" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB156  ,Active Status Bit 156" "Not active,Active"
bitfld.long 0x00 27. "  ASB155  ,Active Status Bit 155" "Not active,Active"
bitfld.long 0x00 26. "  ASB154  ,Active Status Bit 154" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB153  ,Active Status Bit 153" "Not active,Active"
bitfld.long 0x00 24. "  ASB152  ,Active Status Bit 152" "Not active,Active"
bitfld.long 0x00 23. "  ASB151  ,Active Status Bit 151" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB150  ,Active Status Bit 150" "Not active,Active"
bitfld.long 0x00 21. "  ASB149  ,Active Status Bit 149" "Not active,Active"
bitfld.long 0x00 20. "  ASB148  ,Active Status Bit 148" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB147  ,Active Status Bit 147" "Not active,Active"
bitfld.long 0x00 18. "  ASB146  ,Active Status Bit 146" "Not active,Active"
bitfld.long 0x00 17. "  ASB145  ,Active Status Bit 145" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB144  ,Active Status Bit 144" "Not active,Active"
bitfld.long 0x00 15. "  ASB143  ,Active Status Bit 143" "Not active,Active"
bitfld.long 0x00 14. "  ASB142  ,Active Status Bit 142" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB141  ,Active Status Bit 141" "Not active,Active"
bitfld.long 0x00 12. "  ASB140  ,Active Status Bit 140" "Not active,Active"
bitfld.long 0x00 11. "  ASB139  ,Active Status Bit 139" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB138  ,Active Status Bit 138" "Not active,Active"
bitfld.long 0x00 9. "  ASB137  ,Active Status Bit 137" "Not active,Active"
bitfld.long 0x00 8. "  ASB136  ,Active Status Bit 136" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB135  ,Active Status Bit 135" "Not active,Active"
bitfld.long 0x00 6. "  ASB134  ,Active Status Bit 134" "Not active,Active"
bitfld.long 0x00 5. "  ASB133  ,Active Status Bit 133" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB132  ,Active Status Bit 132" "Not active,Active"
bitfld.long 0x00 3. "  ASB131  ,Active Status Bit 131" "Not active,Active"
bitfld.long 0x00 2. "  ASB130  ,Active Status Bit 130" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB129  ,Active Status Bit 129" "Not active,Active"
bitfld.long 0x00 0. "  ASB128  ,Active Status Bit 128" "Not active,Active"
else
rgroup.long 0x0310++0x03
line.long 0x0 "GICD_ICDABR4,Active Status Register 4"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)
rgroup.long 0x0314++0x03
line.long 0x0 "GICD_ICDABR5,Active Status Register 5"
bitfld.long 0x00 31. " ASB191  ,Active Status Bit 191" "Not active,Active"
bitfld.long 0x00 30. "  ASB190  ,Active Status Bit 190" "Not active,Active"
bitfld.long 0x00 29. "  ASB189  ,Active Status Bit 189" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB188  ,Active Status Bit 188" "Not active,Active"
bitfld.long 0x00 27. "  ASB187  ,Active Status Bit 187" "Not active,Active"
bitfld.long 0x00 26. "  ASB186  ,Active Status Bit 186" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB185  ,Active Status Bit 185" "Not active,Active"
bitfld.long 0x00 24. "  ASB184  ,Active Status Bit 184" "Not active,Active"
bitfld.long 0x00 23. "  ASB183  ,Active Status Bit 183" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB182  ,Active Status Bit 182" "Not active,Active"
bitfld.long 0x00 21. "  ASB181  ,Active Status Bit 181" "Not active,Active"
bitfld.long 0x00 20. "  ASB180  ,Active Status Bit 180" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB179  ,Active Status Bit 179" "Not active,Active"
bitfld.long 0x00 18. "  ASB178  ,Active Status Bit 178" "Not active,Active"
bitfld.long 0x00 17. "  ASB177  ,Active Status Bit 177" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB176  ,Active Status Bit 176" "Not active,Active"
bitfld.long 0x00 15. "  ASB175  ,Active Status Bit 175" "Not active,Active"
bitfld.long 0x00 14. "  ASB174  ,Active Status Bit 174" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB173  ,Active Status Bit 173" "Not active,Active"
bitfld.long 0x00 12. "  ASB172  ,Active Status Bit 172" "Not active,Active"
bitfld.long 0x00 11. "  ASB171  ,Active Status Bit 171" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB170  ,Active Status Bit 170" "Not active,Active"
bitfld.long 0x00 9. "  ASB169  ,Active Status Bit 169" "Not active,Active"
bitfld.long 0x00 8. "  ASB168  ,Active Status Bit 168" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB167  ,Active Status Bit 167" "Not active,Active"
bitfld.long 0x00 6. "  ASB166  ,Active Status Bit 166" "Not active,Active"
bitfld.long 0x00 5. "  ASB165  ,Active Status Bit 165" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB164  ,Active Status Bit 164" "Not active,Active"
bitfld.long 0x00 3. "  ASB163  ,Active Status Bit 163" "Not active,Active"
bitfld.long 0x00 2. "  ASB162  ,Active Status Bit 162" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB161  ,Active Status Bit 161" "Not active,Active"
bitfld.long 0x00 0. "  ASB160  ,Active Status Bit 160" "Not active,Active"
else
rgroup.long 0x0314++0x03
line.long 0x0 "GICD_ICDABR5,Active Status Register 5"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)
rgroup.long 0x0318++0x03
line.long 0x0 "GICD_ICDABR6,Active Status Register 6"
bitfld.long 0x00 31. " ASB223  ,Active Status Bit 223" "Not active,Active"
bitfld.long 0x00 30. "  ASB222  ,Active Status Bit 222" "Not active,Active"
bitfld.long 0x00 29. "  ASB221  ,Active Status Bit 221" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB220  ,Active Status Bit 220" "Not active,Active"
bitfld.long 0x00 27. "  ASB219  ,Active Status Bit 219" "Not active,Active"
bitfld.long 0x00 26. "  ASB218  ,Active Status Bit 218" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB217  ,Active Status Bit 217" "Not active,Active"
bitfld.long 0x00 24. "  ASB216  ,Active Status Bit 216" "Not active,Active"
bitfld.long 0x00 23. "  ASB215  ,Active Status Bit 215" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB214  ,Active Status Bit 214" "Not active,Active"
bitfld.long 0x00 21. "  ASB213  ,Active Status Bit 213" "Not active,Active"
bitfld.long 0x00 20. "  ASB212  ,Active Status Bit 212" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB211  ,Active Status Bit 211" "Not active,Active"
bitfld.long 0x00 18. "  ASB210  ,Active Status Bit 210" "Not active,Active"
bitfld.long 0x00 17. "  ASB209  ,Active Status Bit 209" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB208  ,Active Status Bit 208" "Not active,Active"
bitfld.long 0x00 15. "  ASB207  ,Active Status Bit 207" "Not active,Active"
bitfld.long 0x00 14. "  ASB206  ,Active Status Bit 206" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB205  ,Active Status Bit 205" "Not active,Active"
bitfld.long 0x00 12. "  ASB204  ,Active Status Bit 204" "Not active,Active"
bitfld.long 0x00 11. "  ASB203  ,Active Status Bit 203" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB202  ,Active Status Bit 202" "Not active,Active"
bitfld.long 0x00 9. "  ASB201  ,Active Status Bit 201" "Not active,Active"
bitfld.long 0x00 8. "  ASB200  ,Active Status Bit 200" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB199  ,Active Status Bit 199" "Not active,Active"
bitfld.long 0x00 6. "  ASB198  ,Active Status Bit 198" "Not active,Active"
bitfld.long 0x00 5. "  ASB197  ,Active Status Bit 197" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB196  ,Active Status Bit 196" "Not active,Active"
bitfld.long 0x00 3. "  ASB195  ,Active Status Bit 195" "Not active,Active"
bitfld.long 0x00 2. "  ASB194  ,Active Status Bit 194" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB193  ,Active Status Bit 193" "Not active,Active"
bitfld.long 0x00 0. "  ASB192  ,Active Status Bit 192" "Not active,Active"
else
rgroup.long 0x0318++0x03
line.long 0x0 "GICD_ICDABR6,Active Status Register 6"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)
rgroup.long 0x031C++0x03
line.long 0x0 "GICD_ICDABR7,Active Status Register 7"
bitfld.long 0x00 31. " ASB255  ,Active Status Bit 255" "Not active,Active"
bitfld.long 0x00 30. "  ASB254  ,Active Status Bit 254" "Not active,Active"
bitfld.long 0x00 29. "  ASB253  ,Active Status Bit 253" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB252  ,Active Status Bit 252" "Not active,Active"
bitfld.long 0x00 27. "  ASB251  ,Active Status Bit 251" "Not active,Active"
bitfld.long 0x00 26. "  ASB250  ,Active Status Bit 250" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB249  ,Active Status Bit 249" "Not active,Active"
bitfld.long 0x00 24. "  ASB248  ,Active Status Bit 248" "Not active,Active"
bitfld.long 0x00 23. "  ASB247  ,Active Status Bit 247" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB246  ,Active Status Bit 246" "Not active,Active"
bitfld.long 0x00 21. "  ASB245  ,Active Status Bit 245" "Not active,Active"
bitfld.long 0x00 20. "  ASB244  ,Active Status Bit 244" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB243  ,Active Status Bit 243" "Not active,Active"
bitfld.long 0x00 18. "  ASB242  ,Active Status Bit 242" "Not active,Active"
bitfld.long 0x00 17. "  ASB241  ,Active Status Bit 241" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB240  ,Active Status Bit 240" "Not active,Active"
bitfld.long 0x00 15. "  ASB239  ,Active Status Bit 239" "Not active,Active"
bitfld.long 0x00 14. "  ASB238  ,Active Status Bit 238" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB237  ,Active Status Bit 237" "Not active,Active"
bitfld.long 0x00 12. "  ASB236  ,Active Status Bit 236" "Not active,Active"
bitfld.long 0x00 11. "  ASB235  ,Active Status Bit 235" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB234  ,Active Status Bit 234" "Not active,Active"
bitfld.long 0x00 9. "  ASB233  ,Active Status Bit 233" "Not active,Active"
bitfld.long 0x00 8. "  ASB232  ,Active Status Bit 232" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB231  ,Active Status Bit 231" "Not active,Active"
bitfld.long 0x00 6. "  ASB230  ,Active Status Bit 230" "Not active,Active"
bitfld.long 0x00 5. "  ASB229  ,Active Status Bit 229" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB228  ,Active Status Bit 228" "Not active,Active"
bitfld.long 0x00 3. "  ASB227  ,Active Status Bit 227" "Not active,Active"
bitfld.long 0x00 2. "  ASB226  ,Active Status Bit 226" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB225  ,Active Status Bit 225" "Not active,Active"
bitfld.long 0x00 0. "  ASB224  ,Active Status Bit 224" "Not active,Active"
else
rgroup.long 0x031C++0x03
line.long 0x0 "GICD_ICDABR7,Active Status Register 7"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)
rgroup.long 0x0320++0x03
line.long 0x0 "GICD_ICDABR8,Active Status Register 8"
bitfld.long 0x00 31. " ASB287  ,Active Status Bit 287" "Not active,Active"
bitfld.long 0x00 30. "  ASB286  ,Active Status Bit 286" "Not active,Active"
bitfld.long 0x00 29. "  ASB285  ,Active Status Bit 285" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB284  ,Active Status Bit 284" "Not active,Active"
bitfld.long 0x00 27. "  ASB283  ,Active Status Bit 283" "Not active,Active"
bitfld.long 0x00 26. "  ASB282  ,Active Status Bit 282" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB281  ,Active Status Bit 281" "Not active,Active"
bitfld.long 0x00 24. "  ASB280  ,Active Status Bit 280" "Not active,Active"
bitfld.long 0x00 23. "  ASB279  ,Active Status Bit 279" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB278  ,Active Status Bit 278" "Not active,Active"
bitfld.long 0x00 21. "  ASB277  ,Active Status Bit 277" "Not active,Active"
bitfld.long 0x00 20. "  ASB276  ,Active Status Bit 276" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB275  ,Active Status Bit 275" "Not active,Active"
bitfld.long 0x00 18. "  ASB274  ,Active Status Bit 274" "Not active,Active"
bitfld.long 0x00 17. "  ASB273  ,Active Status Bit 273" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB272  ,Active Status Bit 272" "Not active,Active"
bitfld.long 0x00 15. "  ASB271  ,Active Status Bit 271" "Not active,Active"
bitfld.long 0x00 14. "  ASB270  ,Active Status Bit 270" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB269  ,Active Status Bit 269" "Not active,Active"
bitfld.long 0x00 12. "  ASB268  ,Active Status Bit 268" "Not active,Active"
bitfld.long 0x00 11. "  ASB267  ,Active Status Bit 267" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB266  ,Active Status Bit 266" "Not active,Active"
bitfld.long 0x00 9. "  ASB265  ,Active Status Bit 265" "Not active,Active"
bitfld.long 0x00 8. "  ASB264  ,Active Status Bit 264" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB263  ,Active Status Bit 263" "Not active,Active"
bitfld.long 0x00 6. "  ASB262  ,Active Status Bit 262" "Not active,Active"
bitfld.long 0x00 5. "  ASB261  ,Active Status Bit 261" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB260  ,Active Status Bit 260" "Not active,Active"
bitfld.long 0x00 3. "  ASB259  ,Active Status Bit 259" "Not active,Active"
bitfld.long 0x00 2. "  ASB258  ,Active Status Bit 258" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB257  ,Active Status Bit 257" "Not active,Active"
bitfld.long 0x00 0. "  ASB256  ,Active Status Bit 256" "Not active,Active"
else
rgroup.long 0x0320++0x03
line.long 0x0 "GICD_ICDABR8,Active Status Register 8"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)
rgroup.long 0x0324++0x03
line.long 0x0 "GICD_ICDABR9,Active Status Register 9"
bitfld.long 0x00 31. " ASB319  ,Active Status Bit 319" "Not active,Active"
bitfld.long 0x00 30. "  ASB318  ,Active Status Bit 318" "Not active,Active"
bitfld.long 0x00 29. "  ASB317  ,Active Status Bit 317" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB316  ,Active Status Bit 316" "Not active,Active"
bitfld.long 0x00 27. "  ASB315  ,Active Status Bit 315" "Not active,Active"
bitfld.long 0x00 26. "  ASB314  ,Active Status Bit 314" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB313  ,Active Status Bit 313" "Not active,Active"
bitfld.long 0x00 24. "  ASB312  ,Active Status Bit 312" "Not active,Active"
bitfld.long 0x00 23. "  ASB311  ,Active Status Bit 311" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB310  ,Active Status Bit 310" "Not active,Active"
bitfld.long 0x00 21. "  ASB309  ,Active Status Bit 309" "Not active,Active"
bitfld.long 0x00 20. "  ASB308  ,Active Status Bit 308" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB307  ,Active Status Bit 307" "Not active,Active"
bitfld.long 0x00 18. "  ASB306  ,Active Status Bit 306" "Not active,Active"
bitfld.long 0x00 17. "  ASB305  ,Active Status Bit 305" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB304  ,Active Status Bit 304" "Not active,Active"
bitfld.long 0x00 15. "  ASB303  ,Active Status Bit 303" "Not active,Active"
bitfld.long 0x00 14. "  ASB302  ,Active Status Bit 302" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB301  ,Active Status Bit 301" "Not active,Active"
bitfld.long 0x00 12. "  ASB300  ,Active Status Bit 300" "Not active,Active"
bitfld.long 0x00 11. "  ASB299  ,Active Status Bit 299" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB298  ,Active Status Bit 298" "Not active,Active"
bitfld.long 0x00 9. "  ASB297  ,Active Status Bit 297" "Not active,Active"
bitfld.long 0x00 8. "  ASB296  ,Active Status Bit 296" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB295  ,Active Status Bit 295" "Not active,Active"
bitfld.long 0x00 6. "  ASB294  ,Active Status Bit 294" "Not active,Active"
bitfld.long 0x00 5. "  ASB293  ,Active Status Bit 293" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB292  ,Active Status Bit 292" "Not active,Active"
bitfld.long 0x00 3. "  ASB291  ,Active Status Bit 291" "Not active,Active"
bitfld.long 0x00 2. "  ASB290  ,Active Status Bit 290" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB289  ,Active Status Bit 289" "Not active,Active"
bitfld.long 0x00 0. "  ASB288  ,Active Status Bit 288" "Not active,Active"
else
rgroup.long 0x0324++0x03
line.long 0x0 "GICD_ICDABR9,Active Status Register 9"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)
rgroup.long 0x0328++0x03
line.long 0x0 "GICD_ICDABR10,Active Status Register 10"
bitfld.long 0x00 31. " ASB351  ,Active Status Bit 351" "Not active,Active"
bitfld.long 0x00 30. "  ASB350  ,Active Status Bit 350" "Not active,Active"
bitfld.long 0x00 29. "  ASB349  ,Active Status Bit 349" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB348  ,Active Status Bit 348" "Not active,Active"
bitfld.long 0x00 27. "  ASB347  ,Active Status Bit 347" "Not active,Active"
bitfld.long 0x00 26. "  ASB346  ,Active Status Bit 346" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB345  ,Active Status Bit 345" "Not active,Active"
bitfld.long 0x00 24. "  ASB344  ,Active Status Bit 344" "Not active,Active"
bitfld.long 0x00 23. "  ASB343  ,Active Status Bit 343" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB342  ,Active Status Bit 342" "Not active,Active"
bitfld.long 0x00 21. "  ASB341  ,Active Status Bit 341" "Not active,Active"
bitfld.long 0x00 20. "  ASB340  ,Active Status Bit 340" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB339  ,Active Status Bit 339" "Not active,Active"
bitfld.long 0x00 18. "  ASB338  ,Active Status Bit 338" "Not active,Active"
bitfld.long 0x00 17. "  ASB337  ,Active Status Bit 337" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB336  ,Active Status Bit 336" "Not active,Active"
bitfld.long 0x00 15. "  ASB335  ,Active Status Bit 335" "Not active,Active"
bitfld.long 0x00 14. "  ASB334  ,Active Status Bit 334" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB333  ,Active Status Bit 333" "Not active,Active"
bitfld.long 0x00 12. "  ASB332  ,Active Status Bit 332" "Not active,Active"
bitfld.long 0x00 11. "  ASB331  ,Active Status Bit 331" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB330  ,Active Status Bit 330" "Not active,Active"
bitfld.long 0x00 9. "  ASB329  ,Active Status Bit 329" "Not active,Active"
bitfld.long 0x00 8. "  ASB328  ,Active Status Bit 328" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB327  ,Active Status Bit 327" "Not active,Active"
bitfld.long 0x00 6. "  ASB326  ,Active Status Bit 326" "Not active,Active"
bitfld.long 0x00 5. "  ASB325  ,Active Status Bit 325" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB324  ,Active Status Bit 324" "Not active,Active"
bitfld.long 0x00 3. "  ASB323  ,Active Status Bit 323" "Not active,Active"
bitfld.long 0x00 2. "  ASB322  ,Active Status Bit 322" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB321  ,Active Status Bit 321" "Not active,Active"
bitfld.long 0x00 0. "  ASB320  ,Active Status Bit 320" "Not active,Active"
else
rgroup.long 0x0328++0x03
line.long 0x0 "GICD_ICDABR10,Active Status Register 10"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)
rgroup.long 0x032C++0x03
line.long 0x0 "GICD_ICDABR11,Active Status Register 11"
bitfld.long 0x00 31. " ASB383  ,Active Status Bit 383" "Not active,Active"
bitfld.long 0x00 30. "  ASB382  ,Active Status Bit 382" "Not active,Active"
bitfld.long 0x00 29. "  ASB381  ,Active Status Bit 381" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB380  ,Active Status Bit 380" "Not active,Active"
bitfld.long 0x00 27. "  ASB379  ,Active Status Bit 379" "Not active,Active"
bitfld.long 0x00 26. "  ASB378  ,Active Status Bit 378" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB377  ,Active Status Bit 377" "Not active,Active"
bitfld.long 0x00 24. "  ASB376  ,Active Status Bit 376" "Not active,Active"
bitfld.long 0x00 23. "  ASB375  ,Active Status Bit 375" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB374  ,Active Status Bit 374" "Not active,Active"
bitfld.long 0x00 21. "  ASB373  ,Active Status Bit 373" "Not active,Active"
bitfld.long 0x00 20. "  ASB372  ,Active Status Bit 372" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB371  ,Active Status Bit 371" "Not active,Active"
bitfld.long 0x00 18. "  ASB370  ,Active Status Bit 370" "Not active,Active"
bitfld.long 0x00 17. "  ASB369  ,Active Status Bit 369" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB368  ,Active Status Bit 368" "Not active,Active"
bitfld.long 0x00 15. "  ASB367  ,Active Status Bit 367" "Not active,Active"
bitfld.long 0x00 14. "  ASB366  ,Active Status Bit 366" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB365  ,Active Status Bit 365" "Not active,Active"
bitfld.long 0x00 12. "  ASB364  ,Active Status Bit 364" "Not active,Active"
bitfld.long 0x00 11. "  ASB363  ,Active Status Bit 363" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB362  ,Active Status Bit 362" "Not active,Active"
bitfld.long 0x00 9. "  ASB361  ,Active Status Bit 361" "Not active,Active"
bitfld.long 0x00 8. "  ASB360  ,Active Status Bit 360" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB359  ,Active Status Bit 359" "Not active,Active"
bitfld.long 0x00 6. "  ASB358  ,Active Status Bit 358" "Not active,Active"
bitfld.long 0x00 5. "  ASB357  ,Active Status Bit 357" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB356  ,Active Status Bit 356" "Not active,Active"
bitfld.long 0x00 3. "  ASB355  ,Active Status Bit 355" "Not active,Active"
bitfld.long 0x00 2. "  ASB354  ,Active Status Bit 354" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB353  ,Active Status Bit 353" "Not active,Active"
bitfld.long 0x00 0. "  ASB352  ,Active Status Bit 352" "Not active,Active"
else
rgroup.long 0x032C++0x03
line.long 0x0 "GICD_ICDABR11,Active Status Register 11"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)
rgroup.long 0x0330++0x03
line.long 0x0 "GICD_ICDABR12,Active Status Register 12"
bitfld.long 0x00 31. " ASB415  ,Active Status Bit 415" "Not active,Active"
bitfld.long 0x00 30. "  ASB414  ,Active Status Bit 414" "Not active,Active"
bitfld.long 0x00 29. "  ASB413  ,Active Status Bit 413" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB412  ,Active Status Bit 412" "Not active,Active"
bitfld.long 0x00 27. "  ASB411  ,Active Status Bit 411" "Not active,Active"
bitfld.long 0x00 26. "  ASB410  ,Active Status Bit 410" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB409  ,Active Status Bit 409" "Not active,Active"
bitfld.long 0x00 24. "  ASB408  ,Active Status Bit 408" "Not active,Active"
bitfld.long 0x00 23. "  ASB407  ,Active Status Bit 407" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB406  ,Active Status Bit 406" "Not active,Active"
bitfld.long 0x00 21. "  ASB405  ,Active Status Bit 405" "Not active,Active"
bitfld.long 0x00 20. "  ASB404  ,Active Status Bit 404" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB403  ,Active Status Bit 403" "Not active,Active"
bitfld.long 0x00 18. "  ASB402  ,Active Status Bit 402" "Not active,Active"
bitfld.long 0x00 17. "  ASB401  ,Active Status Bit 401" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB400  ,Active Status Bit 400" "Not active,Active"
bitfld.long 0x00 15. "  ASB399  ,Active Status Bit 399" "Not active,Active"
bitfld.long 0x00 14. "  ASB398  ,Active Status Bit 398" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB397  ,Active Status Bit 397" "Not active,Active"
bitfld.long 0x00 12. "  ASB396  ,Active Status Bit 396" "Not active,Active"
bitfld.long 0x00 11. "  ASB395  ,Active Status Bit 395" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB394  ,Active Status Bit 394" "Not active,Active"
bitfld.long 0x00 9. "  ASB393  ,Active Status Bit 393" "Not active,Active"
bitfld.long 0x00 8. "  ASB392  ,Active Status Bit 392" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB391  ,Active Status Bit 391" "Not active,Active"
bitfld.long 0x00 6. "  ASB390  ,Active Status Bit 390" "Not active,Active"
bitfld.long 0x00 5. "  ASB389  ,Active Status Bit 389" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB388  ,Active Status Bit 388" "Not active,Active"
bitfld.long 0x00 3. "  ASB387  ,Active Status Bit 387" "Not active,Active"
bitfld.long 0x00 2. "  ASB386  ,Active Status Bit 386" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB385  ,Active Status Bit 385" "Not active,Active"
bitfld.long 0x00 0. "  ASB384  ,Active Status Bit 384" "Not active,Active"
else
rgroup.long 0x0330++0x03
line.long 0x0 "GICD_ICDABR12,Active Status Register 12"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)
rgroup.long 0x0334++0x03
line.long 0x0 "GICD_ICDABR13,Active Status Register 13"
bitfld.long 0x00 31. " ASB447  ,Active Status Bit 447" "Not active,Active"
bitfld.long 0x00 30. "  ASB446  ,Active Status Bit 446" "Not active,Active"
bitfld.long 0x00 29. "  ASB445  ,Active Status Bit 445" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB444  ,Active Status Bit 444" "Not active,Active"
bitfld.long 0x00 27. "  ASB443  ,Active Status Bit 443" "Not active,Active"
bitfld.long 0x00 26. "  ASB442  ,Active Status Bit 442" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB441  ,Active Status Bit 441" "Not active,Active"
bitfld.long 0x00 24. "  ASB440  ,Active Status Bit 440" "Not active,Active"
bitfld.long 0x00 23. "  ASB439  ,Active Status Bit 439" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB438  ,Active Status Bit 438" "Not active,Active"
bitfld.long 0x00 21. "  ASB437  ,Active Status Bit 437" "Not active,Active"
bitfld.long 0x00 20. "  ASB436  ,Active Status Bit 436" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB435  ,Active Status Bit 435" "Not active,Active"
bitfld.long 0x00 18. "  ASB434  ,Active Status Bit 434" "Not active,Active"
bitfld.long 0x00 17. "  ASB433  ,Active Status Bit 433" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB432  ,Active Status Bit 432" "Not active,Active"
bitfld.long 0x00 15. "  ASB431  ,Active Status Bit 431" "Not active,Active"
bitfld.long 0x00 14. "  ASB430  ,Active Status Bit 430" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB429  ,Active Status Bit 429" "Not active,Active"
bitfld.long 0x00 12. "  ASB428  ,Active Status Bit 428" "Not active,Active"
bitfld.long 0x00 11. "  ASB427  ,Active Status Bit 427" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB426  ,Active Status Bit 426" "Not active,Active"
bitfld.long 0x00 9. "  ASB425  ,Active Status Bit 425" "Not active,Active"
bitfld.long 0x00 8. "  ASB424  ,Active Status Bit 424" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB423  ,Active Status Bit 423" "Not active,Active"
bitfld.long 0x00 6. "  ASB422  ,Active Status Bit 422" "Not active,Active"
bitfld.long 0x00 5. "  ASB421  ,Active Status Bit 421" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB420  ,Active Status Bit 420" "Not active,Active"
bitfld.long 0x00 3. "  ASB419  ,Active Status Bit 419" "Not active,Active"
bitfld.long 0x00 2. "  ASB418  ,Active Status Bit 418" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB417  ,Active Status Bit 417" "Not active,Active"
bitfld.long 0x00 0. "  ASB416  ,Active Status Bit 416" "Not active,Active"
else
rgroup.long 0x0334++0x03
line.long 0x0 "GICD_ICDABR13,Active Status Register 13"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)
rgroup.long 0x0338++0x03
line.long 0x0 "GICD_ICDABR14,Active Status Register 14"
bitfld.long 0x00 31. " ASB479  ,Active Status Bit 479" "Not active,Active"
bitfld.long 0x00 30. "  ASB478  ,Active Status Bit 478" "Not active,Active"
bitfld.long 0x00 29. "  ASB477  ,Active Status Bit 477" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB476  ,Active Status Bit 476" "Not active,Active"
bitfld.long 0x00 27. "  ASB475  ,Active Status Bit 475" "Not active,Active"
bitfld.long 0x00 26. "  ASB474  ,Active Status Bit 474" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB473  ,Active Status Bit 473" "Not active,Active"
bitfld.long 0x00 24. "  ASB472  ,Active Status Bit 472" "Not active,Active"
bitfld.long 0x00 23. "  ASB471  ,Active Status Bit 471" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB470  ,Active Status Bit 470" "Not active,Active"
bitfld.long 0x00 21. "  ASB469  ,Active Status Bit 469" "Not active,Active"
bitfld.long 0x00 20. "  ASB468  ,Active Status Bit 468" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB467  ,Active Status Bit 467" "Not active,Active"
bitfld.long 0x00 18. "  ASB466  ,Active Status Bit 466" "Not active,Active"
bitfld.long 0x00 17. "  ASB465  ,Active Status Bit 465" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB464  ,Active Status Bit 464" "Not active,Active"
bitfld.long 0x00 15. "  ASB463  ,Active Status Bit 463" "Not active,Active"
bitfld.long 0x00 14. "  ASB462  ,Active Status Bit 462" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB461  ,Active Status Bit 461" "Not active,Active"
bitfld.long 0x00 12. "  ASB460  ,Active Status Bit 460" "Not active,Active"
bitfld.long 0x00 11. "  ASB459  ,Active Status Bit 459" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB458  ,Active Status Bit 458" "Not active,Active"
bitfld.long 0x00 9. "  ASB457  ,Active Status Bit 457" "Not active,Active"
bitfld.long 0x00 8. "  ASB456  ,Active Status Bit 456" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB455  ,Active Status Bit 455" "Not active,Active"
bitfld.long 0x00 6. "  ASB454  ,Active Status Bit 454" "Not active,Active"
bitfld.long 0x00 5. "  ASB453  ,Active Status Bit 453" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB452  ,Active Status Bit 452" "Not active,Active"
bitfld.long 0x00 3. "  ASB451  ,Active Status Bit 451" "Not active,Active"
bitfld.long 0x00 2. "  ASB450  ,Active Status Bit 450" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB449  ,Active Status Bit 449" "Not active,Active"
bitfld.long 0x00 0. "  ASB448  ,Active Status Bit 448" "Not active,Active"
else
rgroup.long 0x0338++0x03
line.long 0x0 "GICD_ICDABR14,Active Status Register 14"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)
rgroup.long 0x033C++0x03
line.long 0x0 "GICD_ICDABR15,Active Status Register 15"
bitfld.long 0x00 31. " ASB511  ,Active Status Bit 511" "Not active,Active"
bitfld.long 0x00 30. "  ASB510  ,Active Status Bit 510" "Not active,Active"
bitfld.long 0x00 29. "  ASB509  ,Active Status Bit 509" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB508  ,Active Status Bit 508" "Not active,Active"
bitfld.long 0x00 27. "  ASB507  ,Active Status Bit 507" "Not active,Active"
bitfld.long 0x00 26. "  ASB506  ,Active Status Bit 506" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB505  ,Active Status Bit 505" "Not active,Active"
bitfld.long 0x00 24. "  ASB504  ,Active Status Bit 504" "Not active,Active"
bitfld.long 0x00 23. "  ASB503  ,Active Status Bit 503" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB502  ,Active Status Bit 502" "Not active,Active"
bitfld.long 0x00 21. "  ASB501  ,Active Status Bit 501" "Not active,Active"
bitfld.long 0x00 20. "  ASB500  ,Active Status Bit 500" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB499  ,Active Status Bit 499" "Not active,Active"
bitfld.long 0x00 18. "  ASB498  ,Active Status Bit 498" "Not active,Active"
bitfld.long 0x00 17. "  ASB497  ,Active Status Bit 497" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB496  ,Active Status Bit 496" "Not active,Active"
bitfld.long 0x00 15. "  ASB495  ,Active Status Bit 495" "Not active,Active"
bitfld.long 0x00 14. "  ASB494  ,Active Status Bit 494" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB493  ,Active Status Bit 493" "Not active,Active"
bitfld.long 0x00 12. "  ASB492  ,Active Status Bit 492" "Not active,Active"
bitfld.long 0x00 11. "  ASB491  ,Active Status Bit 491" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB490  ,Active Status Bit 490" "Not active,Active"
bitfld.long 0x00 9. "  ASB489  ,Active Status Bit 489" "Not active,Active"
bitfld.long 0x00 8. "  ASB488  ,Active Status Bit 488" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB487  ,Active Status Bit 487" "Not active,Active"
bitfld.long 0x00 6. "  ASB486  ,Active Status Bit 486" "Not active,Active"
bitfld.long 0x00 5. "  ASB485  ,Active Status Bit 485" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB484  ,Active Status Bit 484" "Not active,Active"
bitfld.long 0x00 3. "  ASB483  ,Active Status Bit 483" "Not active,Active"
bitfld.long 0x00 2. "  ASB482  ,Active Status Bit 482" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB481  ,Active Status Bit 481" "Not active,Active"
bitfld.long 0x00 0. "  ASB480  ,Active Status Bit 480" "Not active,Active"
else
rgroup.long 0x033C++0x03
line.long 0x0 "GICD_ICDABR15,Active Status Register 15"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)
rgroup.long 0x0340++0x03
line.long 0x0 "GICD_ICDABR16,Active Status Register 16"
bitfld.long 0x00 31. " ASB543  ,Active Status Bit 543" "Not active,Active"
bitfld.long 0x00 30. "  ASB542  ,Active Status Bit 542" "Not active,Active"
bitfld.long 0x00 29. "  ASB541  ,Active Status Bit 541" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB540  ,Active Status Bit 540" "Not active,Active"
bitfld.long 0x00 27. "  ASB539  ,Active Status Bit 539" "Not active,Active"
bitfld.long 0x00 26. "  ASB538  ,Active Status Bit 538" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB537  ,Active Status Bit 537" "Not active,Active"
bitfld.long 0x00 24. "  ASB536  ,Active Status Bit 536" "Not active,Active"
bitfld.long 0x00 23. "  ASB535  ,Active Status Bit 535" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB534  ,Active Status Bit 534" "Not active,Active"
bitfld.long 0x00 21. "  ASB533  ,Active Status Bit 533" "Not active,Active"
bitfld.long 0x00 20. "  ASB532  ,Active Status Bit 532" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB531  ,Active Status Bit 531" "Not active,Active"
bitfld.long 0x00 18. "  ASB530  ,Active Status Bit 530" "Not active,Active"
bitfld.long 0x00 17. "  ASB529  ,Active Status Bit 529" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB528  ,Active Status Bit 528" "Not active,Active"
bitfld.long 0x00 15. "  ASB527  ,Active Status Bit 527" "Not active,Active"
bitfld.long 0x00 14. "  ASB526  ,Active Status Bit 526" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB525  ,Active Status Bit 525" "Not active,Active"
bitfld.long 0x00 12. "  ASB524  ,Active Status Bit 524" "Not active,Active"
bitfld.long 0x00 11. "  ASB523  ,Active Status Bit 523" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB522  ,Active Status Bit 522" "Not active,Active"
bitfld.long 0x00 9. "  ASB521  ,Active Status Bit 521" "Not active,Active"
bitfld.long 0x00 8. "  ASB520  ,Active Status Bit 520" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB519  ,Active Status Bit 519" "Not active,Active"
bitfld.long 0x00 6. "  ASB518  ,Active Status Bit 518" "Not active,Active"
bitfld.long 0x00 5. "  ASB517  ,Active Status Bit 517" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB516  ,Active Status Bit 516" "Not active,Active"
bitfld.long 0x00 3. "  ASB515  ,Active Status Bit 515" "Not active,Active"
bitfld.long 0x00 2. "  ASB514  ,Active Status Bit 514" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB513  ,Active Status Bit 513" "Not active,Active"
bitfld.long 0x00 0. "  ASB512  ,Active Status Bit 512" "Not active,Active"
else
rgroup.long 0x0340++0x03
line.long 0x0 "GICD_ICDABR16,Active Status Register 16"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)
rgroup.long 0x0344++0x03
line.long 0x0 "GICD_ICDABR17,Active Status Register 17"
bitfld.long 0x00 31. " ASB575  ,Active Status Bit 575" "Not active,Active"
bitfld.long 0x00 30. "  ASB574  ,Active Status Bit 574" "Not active,Active"
bitfld.long 0x00 29. "  ASB573  ,Active Status Bit 573" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB572  ,Active Status Bit 572" "Not active,Active"
bitfld.long 0x00 27. "  ASB571  ,Active Status Bit 571" "Not active,Active"
bitfld.long 0x00 26. "  ASB570  ,Active Status Bit 570" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB569  ,Active Status Bit 569" "Not active,Active"
bitfld.long 0x00 24. "  ASB568  ,Active Status Bit 568" "Not active,Active"
bitfld.long 0x00 23. "  ASB567  ,Active Status Bit 567" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB566  ,Active Status Bit 566" "Not active,Active"
bitfld.long 0x00 21. "  ASB565  ,Active Status Bit 565" "Not active,Active"
bitfld.long 0x00 20. "  ASB564  ,Active Status Bit 564" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB563  ,Active Status Bit 563" "Not active,Active"
bitfld.long 0x00 18. "  ASB562  ,Active Status Bit 562" "Not active,Active"
bitfld.long 0x00 17. "  ASB561  ,Active Status Bit 561" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB560  ,Active Status Bit 560" "Not active,Active"
bitfld.long 0x00 15. "  ASB559  ,Active Status Bit 559" "Not active,Active"
bitfld.long 0x00 14. "  ASB558  ,Active Status Bit 558" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB557  ,Active Status Bit 557" "Not active,Active"
bitfld.long 0x00 12. "  ASB556  ,Active Status Bit 556" "Not active,Active"
bitfld.long 0x00 11. "  ASB555  ,Active Status Bit 555" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB554  ,Active Status Bit 554" "Not active,Active"
bitfld.long 0x00 9. "  ASB553  ,Active Status Bit 553" "Not active,Active"
bitfld.long 0x00 8. "  ASB552  ,Active Status Bit 552" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB551  ,Active Status Bit 551" "Not active,Active"
bitfld.long 0x00 6. "  ASB550  ,Active Status Bit 550" "Not active,Active"
bitfld.long 0x00 5. "  ASB549  ,Active Status Bit 549" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB548  ,Active Status Bit 548" "Not active,Active"
bitfld.long 0x00 3. "  ASB547  ,Active Status Bit 547" "Not active,Active"
bitfld.long 0x00 2. "  ASB546  ,Active Status Bit 546" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB545  ,Active Status Bit 545" "Not active,Active"
bitfld.long 0x00 0. "  ASB544  ,Active Status Bit 544" "Not active,Active"
else
rgroup.long 0x0344++0x03
line.long 0x0 "GICD_ICDABR17,Active Status Register 17"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)
rgroup.long 0x0348++0x03
line.long 0x0 "GICD_ICDABR18,Active Status Register 18"
bitfld.long 0x00 31. " ASB607  ,Active Status Bit 607" "Not active,Active"
bitfld.long 0x00 30. "  ASB606  ,Active Status Bit 606" "Not active,Active"
bitfld.long 0x00 29. "  ASB605  ,Active Status Bit 605" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB604  ,Active Status Bit 604" "Not active,Active"
bitfld.long 0x00 27. "  ASB603  ,Active Status Bit 603" "Not active,Active"
bitfld.long 0x00 26. "  ASB602  ,Active Status Bit 602" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB601  ,Active Status Bit 601" "Not active,Active"
bitfld.long 0x00 24. "  ASB600  ,Active Status Bit 600" "Not active,Active"
bitfld.long 0x00 23. "  ASB599  ,Active Status Bit 599" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB598  ,Active Status Bit 598" "Not active,Active"
bitfld.long 0x00 21. "  ASB597  ,Active Status Bit 597" "Not active,Active"
bitfld.long 0x00 20. "  ASB596  ,Active Status Bit 596" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB595  ,Active Status Bit 595" "Not active,Active"
bitfld.long 0x00 18. "  ASB594  ,Active Status Bit 594" "Not active,Active"
bitfld.long 0x00 17. "  ASB593  ,Active Status Bit 593" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB592  ,Active Status Bit 592" "Not active,Active"
bitfld.long 0x00 15. "  ASB591  ,Active Status Bit 591" "Not active,Active"
bitfld.long 0x00 14. "  ASB590  ,Active Status Bit 590" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB589  ,Active Status Bit 589" "Not active,Active"
bitfld.long 0x00 12. "  ASB588  ,Active Status Bit 588" "Not active,Active"
bitfld.long 0x00 11. "  ASB587  ,Active Status Bit 587" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB586  ,Active Status Bit 586" "Not active,Active"
bitfld.long 0x00 9. "  ASB585  ,Active Status Bit 585" "Not active,Active"
bitfld.long 0x00 8. "  ASB584  ,Active Status Bit 584" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB583  ,Active Status Bit 583" "Not active,Active"
bitfld.long 0x00 6. "  ASB582  ,Active Status Bit 582" "Not active,Active"
bitfld.long 0x00 5. "  ASB581  ,Active Status Bit 581" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB580  ,Active Status Bit 580" "Not active,Active"
bitfld.long 0x00 3. "  ASB579  ,Active Status Bit 579" "Not active,Active"
bitfld.long 0x00 2. "  ASB578  ,Active Status Bit 578" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB577  ,Active Status Bit 577" "Not active,Active"
bitfld.long 0x00 0. "  ASB576  ,Active Status Bit 576" "Not active,Active"
else
rgroup.long 0x0348++0x03
line.long 0x0 "GICD_ICDABR18,Active Status Register 18"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)
rgroup.long 0x034C++0x03
line.long 0x0 "GICD_ICDABR19,Active Status Register 19"
bitfld.long 0x00 31. " ASB639  ,Active Status Bit 639" "Not active,Active"
bitfld.long 0x00 30. "  ASB638  ,Active Status Bit 638" "Not active,Active"
bitfld.long 0x00 29. "  ASB637  ,Active Status Bit 637" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB636  ,Active Status Bit 636" "Not active,Active"
bitfld.long 0x00 27. "  ASB635  ,Active Status Bit 635" "Not active,Active"
bitfld.long 0x00 26. "  ASB634  ,Active Status Bit 634" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB633  ,Active Status Bit 633" "Not active,Active"
bitfld.long 0x00 24. "  ASB632  ,Active Status Bit 632" "Not active,Active"
bitfld.long 0x00 23. "  ASB631  ,Active Status Bit 631" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB630  ,Active Status Bit 630" "Not active,Active"
bitfld.long 0x00 21. "  ASB629  ,Active Status Bit 629" "Not active,Active"
bitfld.long 0x00 20. "  ASB628  ,Active Status Bit 628" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB627  ,Active Status Bit 627" "Not active,Active"
bitfld.long 0x00 18. "  ASB626  ,Active Status Bit 626" "Not active,Active"
bitfld.long 0x00 17. "  ASB625  ,Active Status Bit 625" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB624  ,Active Status Bit 624" "Not active,Active"
bitfld.long 0x00 15. "  ASB623  ,Active Status Bit 623" "Not active,Active"
bitfld.long 0x00 14. "  ASB622  ,Active Status Bit 622" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB621  ,Active Status Bit 621" "Not active,Active"
bitfld.long 0x00 12. "  ASB620  ,Active Status Bit 620" "Not active,Active"
bitfld.long 0x00 11. "  ASB619  ,Active Status Bit 619" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB618  ,Active Status Bit 618" "Not active,Active"
bitfld.long 0x00 9. "  ASB617  ,Active Status Bit 617" "Not active,Active"
bitfld.long 0x00 8. "  ASB616  ,Active Status Bit 616" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB615  ,Active Status Bit 615" "Not active,Active"
bitfld.long 0x00 6. "  ASB614  ,Active Status Bit 614" "Not active,Active"
bitfld.long 0x00 5. "  ASB613  ,Active Status Bit 613" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB612  ,Active Status Bit 612" "Not active,Active"
bitfld.long 0x00 3. "  ASB611  ,Active Status Bit 611" "Not active,Active"
bitfld.long 0x00 2. "  ASB610  ,Active Status Bit 610" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB609  ,Active Status Bit 609" "Not active,Active"
bitfld.long 0x00 0. "  ASB608  ,Active Status Bit 608" "Not active,Active"
else
rgroup.long 0x034C++0x03
line.long 0x0 "GICD_ICDABR19,Active Status Register 19"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)
rgroup.long 0x0350++0x03
line.long 0x0 "GICD_ICDABR20,Active Status Register 20"
bitfld.long 0x00 31. " ASB671  ,Active Status Bit 671" "Not active,Active"
bitfld.long 0x00 30. "  ASB670  ,Active Status Bit 670" "Not active,Active"
bitfld.long 0x00 29. "  ASB669  ,Active Status Bit 669" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB668  ,Active Status Bit 668" "Not active,Active"
bitfld.long 0x00 27. "  ASB667  ,Active Status Bit 667" "Not active,Active"
bitfld.long 0x00 26. "  ASB666  ,Active Status Bit 666" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB665  ,Active Status Bit 665" "Not active,Active"
bitfld.long 0x00 24. "  ASB664  ,Active Status Bit 664" "Not active,Active"
bitfld.long 0x00 23. "  ASB663  ,Active Status Bit 663" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB662  ,Active Status Bit 662" "Not active,Active"
bitfld.long 0x00 21. "  ASB661  ,Active Status Bit 661" "Not active,Active"
bitfld.long 0x00 20. "  ASB660  ,Active Status Bit 660" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB659  ,Active Status Bit 659" "Not active,Active"
bitfld.long 0x00 18. "  ASB658  ,Active Status Bit 658" "Not active,Active"
bitfld.long 0x00 17. "  ASB657  ,Active Status Bit 657" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB656  ,Active Status Bit 656" "Not active,Active"
bitfld.long 0x00 15. "  ASB655  ,Active Status Bit 655" "Not active,Active"
bitfld.long 0x00 14. "  ASB654  ,Active Status Bit 654" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB653  ,Active Status Bit 653" "Not active,Active"
bitfld.long 0x00 12. "  ASB652  ,Active Status Bit 652" "Not active,Active"
bitfld.long 0x00 11. "  ASB651  ,Active Status Bit 651" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB650  ,Active Status Bit 650" "Not active,Active"
bitfld.long 0x00 9. "  ASB649  ,Active Status Bit 649" "Not active,Active"
bitfld.long 0x00 8. "  ASB648  ,Active Status Bit 648" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB647  ,Active Status Bit 647" "Not active,Active"
bitfld.long 0x00 6. "  ASB646  ,Active Status Bit 646" "Not active,Active"
bitfld.long 0x00 5. "  ASB645  ,Active Status Bit 645" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB644  ,Active Status Bit 644" "Not active,Active"
bitfld.long 0x00 3. "  ASB643  ,Active Status Bit 643" "Not active,Active"
bitfld.long 0x00 2. "  ASB642  ,Active Status Bit 642" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB641  ,Active Status Bit 641" "Not active,Active"
bitfld.long 0x00 0. "  ASB640  ,Active Status Bit 640" "Not active,Active"
else
rgroup.long 0x0350++0x03
line.long 0x0 "GICD_ICDABR20,Active Status Register 20"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)
rgroup.long 0x0354++0x03
line.long 0x0 "GICD_ICDABR21,Active Status Register 21"
bitfld.long 0x00 31. " ASB703  ,Active Status Bit 703" "Not active,Active"
bitfld.long 0x00 30. "  ASB702  ,Active Status Bit 702" "Not active,Active"
bitfld.long 0x00 29. "  ASB701  ,Active Status Bit 701" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB700  ,Active Status Bit 700" "Not active,Active"
bitfld.long 0x00 27. "  ASB699  ,Active Status Bit 699" "Not active,Active"
bitfld.long 0x00 26. "  ASB698  ,Active Status Bit 698" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB697  ,Active Status Bit 697" "Not active,Active"
bitfld.long 0x00 24. "  ASB696  ,Active Status Bit 696" "Not active,Active"
bitfld.long 0x00 23. "  ASB695  ,Active Status Bit 695" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB694  ,Active Status Bit 694" "Not active,Active"
bitfld.long 0x00 21. "  ASB693  ,Active Status Bit 693" "Not active,Active"
bitfld.long 0x00 20. "  ASB692  ,Active Status Bit 692" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB691  ,Active Status Bit 691" "Not active,Active"
bitfld.long 0x00 18. "  ASB690  ,Active Status Bit 690" "Not active,Active"
bitfld.long 0x00 17. "  ASB689  ,Active Status Bit 689" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB688  ,Active Status Bit 688" "Not active,Active"
bitfld.long 0x00 15. "  ASB687  ,Active Status Bit 687" "Not active,Active"
bitfld.long 0x00 14. "  ASB686  ,Active Status Bit 686" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB685  ,Active Status Bit 685" "Not active,Active"
bitfld.long 0x00 12. "  ASB684  ,Active Status Bit 684" "Not active,Active"
bitfld.long 0x00 11. "  ASB683  ,Active Status Bit 683" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB682  ,Active Status Bit 682" "Not active,Active"
bitfld.long 0x00 9. "  ASB681  ,Active Status Bit 681" "Not active,Active"
bitfld.long 0x00 8. "  ASB680  ,Active Status Bit 680" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB679  ,Active Status Bit 679" "Not active,Active"
bitfld.long 0x00 6. "  ASB678  ,Active Status Bit 678" "Not active,Active"
bitfld.long 0x00 5. "  ASB677  ,Active Status Bit 677" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB676  ,Active Status Bit 676" "Not active,Active"
bitfld.long 0x00 3. "  ASB675  ,Active Status Bit 675" "Not active,Active"
bitfld.long 0x00 2. "  ASB674  ,Active Status Bit 674" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB673  ,Active Status Bit 673" "Not active,Active"
bitfld.long 0x00 0. "  ASB672  ,Active Status Bit 672" "Not active,Active"
else
rgroup.long 0x0354++0x03
line.long 0x0 "GICD_ICDABR21,Active Status Register 21"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)
rgroup.long 0x0358++0x03
line.long 0x0 "GICD_ICDABR22,Active Status Register 22"
bitfld.long 0x00 31. " ASB735  ,Active Status Bit 735" "Not active,Active"
bitfld.long 0x00 30. "  ASB734  ,Active Status Bit 734" "Not active,Active"
bitfld.long 0x00 29. "  ASB733  ,Active Status Bit 733" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB732  ,Active Status Bit 732" "Not active,Active"
bitfld.long 0x00 27. "  ASB731  ,Active Status Bit 731" "Not active,Active"
bitfld.long 0x00 26. "  ASB730  ,Active Status Bit 730" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB729  ,Active Status Bit 729" "Not active,Active"
bitfld.long 0x00 24. "  ASB728  ,Active Status Bit 728" "Not active,Active"
bitfld.long 0x00 23. "  ASB727  ,Active Status Bit 727" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB726  ,Active Status Bit 726" "Not active,Active"
bitfld.long 0x00 21. "  ASB725  ,Active Status Bit 725" "Not active,Active"
bitfld.long 0x00 20. "  ASB724  ,Active Status Bit 724" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB723  ,Active Status Bit 723" "Not active,Active"
bitfld.long 0x00 18. "  ASB722  ,Active Status Bit 722" "Not active,Active"
bitfld.long 0x00 17. "  ASB721  ,Active Status Bit 721" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB720  ,Active Status Bit 720" "Not active,Active"
bitfld.long 0x00 15. "  ASB719  ,Active Status Bit 719" "Not active,Active"
bitfld.long 0x00 14. "  ASB718  ,Active Status Bit 718" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB717  ,Active Status Bit 717" "Not active,Active"
bitfld.long 0x00 12. "  ASB716  ,Active Status Bit 716" "Not active,Active"
bitfld.long 0x00 11. "  ASB715  ,Active Status Bit 715" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB714  ,Active Status Bit 714" "Not active,Active"
bitfld.long 0x00 9. "  ASB713  ,Active Status Bit 713" "Not active,Active"
bitfld.long 0x00 8. "  ASB712  ,Active Status Bit 712" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB711  ,Active Status Bit 711" "Not active,Active"
bitfld.long 0x00 6. "  ASB710  ,Active Status Bit 710" "Not active,Active"
bitfld.long 0x00 5. "  ASB709  ,Active Status Bit 709" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB708  ,Active Status Bit 708" "Not active,Active"
bitfld.long 0x00 3. "  ASB707  ,Active Status Bit 707" "Not active,Active"
bitfld.long 0x00 2. "  ASB706  ,Active Status Bit 706" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB705  ,Active Status Bit 705" "Not active,Active"
bitfld.long 0x00 0. "  ASB704  ,Active Status Bit 704" "Not active,Active"
else
rgroup.long 0x0358++0x03
line.long 0x0 "GICD_ICDABR22,Active Status Register 22"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)
rgroup.long 0x035C++0x03
line.long 0x0 "GICD_ICDABR23,Active Status Register 23"
bitfld.long 0x00 31. " ASB767  ,Active Status Bit 767" "Not active,Active"
bitfld.long 0x00 30. "  ASB766  ,Active Status Bit 766" "Not active,Active"
bitfld.long 0x00 29. "  ASB765  ,Active Status Bit 765" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB764  ,Active Status Bit 764" "Not active,Active"
bitfld.long 0x00 27. "  ASB763  ,Active Status Bit 763" "Not active,Active"
bitfld.long 0x00 26. "  ASB762  ,Active Status Bit 762" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB761  ,Active Status Bit 761" "Not active,Active"
bitfld.long 0x00 24. "  ASB760  ,Active Status Bit 760" "Not active,Active"
bitfld.long 0x00 23. "  ASB759  ,Active Status Bit 759" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB758  ,Active Status Bit 758" "Not active,Active"
bitfld.long 0x00 21. "  ASB757  ,Active Status Bit 757" "Not active,Active"
bitfld.long 0x00 20. "  ASB756  ,Active Status Bit 756" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB755  ,Active Status Bit 755" "Not active,Active"
bitfld.long 0x00 18. "  ASB754  ,Active Status Bit 754" "Not active,Active"
bitfld.long 0x00 17. "  ASB753  ,Active Status Bit 753" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB752  ,Active Status Bit 752" "Not active,Active"
bitfld.long 0x00 15. "  ASB751  ,Active Status Bit 751" "Not active,Active"
bitfld.long 0x00 14. "  ASB750  ,Active Status Bit 750" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB749  ,Active Status Bit 749" "Not active,Active"
bitfld.long 0x00 12. "  ASB748  ,Active Status Bit 748" "Not active,Active"
bitfld.long 0x00 11. "  ASB747  ,Active Status Bit 747" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB746  ,Active Status Bit 746" "Not active,Active"
bitfld.long 0x00 9. "  ASB745  ,Active Status Bit 745" "Not active,Active"
bitfld.long 0x00 8. "  ASB744  ,Active Status Bit 744" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB743  ,Active Status Bit 743" "Not active,Active"
bitfld.long 0x00 6. "  ASB742  ,Active Status Bit 742" "Not active,Active"
bitfld.long 0x00 5. "  ASB741  ,Active Status Bit 741" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB740  ,Active Status Bit 740" "Not active,Active"
bitfld.long 0x00 3. "  ASB739  ,Active Status Bit 739" "Not active,Active"
bitfld.long 0x00 2. "  ASB738  ,Active Status Bit 738" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB737  ,Active Status Bit 737" "Not active,Active"
bitfld.long 0x00 0. "  ASB736  ,Active Status Bit 736" "Not active,Active"
else
rgroup.long 0x035C++0x03
line.long 0x0 "GICD_ICDABR23,Active Status Register 23"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)
rgroup.long 0x0360++0x03
line.long 0x0 "GICD_ICDABR24,Active Status Register 24"
bitfld.long 0x00 31. " ASB799  ,Active Status Bit 799" "Not active,Active"
bitfld.long 0x00 30. "  ASB798  ,Active Status Bit 798" "Not active,Active"
bitfld.long 0x00 29. "  ASB797  ,Active Status Bit 797" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB796  ,Active Status Bit 796" "Not active,Active"
bitfld.long 0x00 27. "  ASB795  ,Active Status Bit 795" "Not active,Active"
bitfld.long 0x00 26. "  ASB794  ,Active Status Bit 794" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB793  ,Active Status Bit 793" "Not active,Active"
bitfld.long 0x00 24. "  ASB792  ,Active Status Bit 792" "Not active,Active"
bitfld.long 0x00 23. "  ASB791  ,Active Status Bit 791" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB790  ,Active Status Bit 790" "Not active,Active"
bitfld.long 0x00 21. "  ASB789  ,Active Status Bit 789" "Not active,Active"
bitfld.long 0x00 20. "  ASB788  ,Active Status Bit 788" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB787  ,Active Status Bit 787" "Not active,Active"
bitfld.long 0x00 18. "  ASB786  ,Active Status Bit 786" "Not active,Active"
bitfld.long 0x00 17. "  ASB785  ,Active Status Bit 785" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB784  ,Active Status Bit 784" "Not active,Active"
bitfld.long 0x00 15. "  ASB783  ,Active Status Bit 783" "Not active,Active"
bitfld.long 0x00 14. "  ASB782  ,Active Status Bit 782" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB781  ,Active Status Bit 781" "Not active,Active"
bitfld.long 0x00 12. "  ASB780  ,Active Status Bit 780" "Not active,Active"
bitfld.long 0x00 11. "  ASB779  ,Active Status Bit 779" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB778  ,Active Status Bit 778" "Not active,Active"
bitfld.long 0x00 9. "  ASB777  ,Active Status Bit 777" "Not active,Active"
bitfld.long 0x00 8. "  ASB776  ,Active Status Bit 776" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB775  ,Active Status Bit 775" "Not active,Active"
bitfld.long 0x00 6. "  ASB774  ,Active Status Bit 774" "Not active,Active"
bitfld.long 0x00 5. "  ASB773  ,Active Status Bit 773" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB772  ,Active Status Bit 772" "Not active,Active"
bitfld.long 0x00 3. "  ASB771  ,Active Status Bit 771" "Not active,Active"
bitfld.long 0x00 2. "  ASB770  ,Active Status Bit 770" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB769  ,Active Status Bit 769" "Not active,Active"
bitfld.long 0x00 0. "  ASB768  ,Active Status Bit 768" "Not active,Active"
else
rgroup.long 0x0360++0x03
line.long 0x0 "GICD_ICDABR24,Active Status Register 24"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)
rgroup.long 0x0364++0x03
line.long 0x0 "GICD_ICDABR25,Active Status Register 25"
bitfld.long 0x00 31. " ASB831  ,Active Status Bit 831" "Not active,Active"
bitfld.long 0x00 30. "  ASB830  ,Active Status Bit 830" "Not active,Active"
bitfld.long 0x00 29. "  ASB829  ,Active Status Bit 829" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB828  ,Active Status Bit 828" "Not active,Active"
bitfld.long 0x00 27. "  ASB827  ,Active Status Bit 827" "Not active,Active"
bitfld.long 0x00 26. "  ASB826  ,Active Status Bit 826" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB825  ,Active Status Bit 825" "Not active,Active"
bitfld.long 0x00 24. "  ASB824  ,Active Status Bit 824" "Not active,Active"
bitfld.long 0x00 23. "  ASB823  ,Active Status Bit 823" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB822  ,Active Status Bit 822" "Not active,Active"
bitfld.long 0x00 21. "  ASB821  ,Active Status Bit 821" "Not active,Active"
bitfld.long 0x00 20. "  ASB820  ,Active Status Bit 820" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB819  ,Active Status Bit 819" "Not active,Active"
bitfld.long 0x00 18. "  ASB818  ,Active Status Bit 818" "Not active,Active"
bitfld.long 0x00 17. "  ASB817  ,Active Status Bit 817" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB816  ,Active Status Bit 816" "Not active,Active"
bitfld.long 0x00 15. "  ASB815  ,Active Status Bit 815" "Not active,Active"
bitfld.long 0x00 14. "  ASB814  ,Active Status Bit 814" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB813  ,Active Status Bit 813" "Not active,Active"
bitfld.long 0x00 12. "  ASB812  ,Active Status Bit 812" "Not active,Active"
bitfld.long 0x00 11. "  ASB811  ,Active Status Bit 811" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB810  ,Active Status Bit 810" "Not active,Active"
bitfld.long 0x00 9. "  ASB809  ,Active Status Bit 809" "Not active,Active"
bitfld.long 0x00 8. "  ASB808  ,Active Status Bit 808" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB807  ,Active Status Bit 807" "Not active,Active"
bitfld.long 0x00 6. "  ASB806  ,Active Status Bit 806" "Not active,Active"
bitfld.long 0x00 5. "  ASB805  ,Active Status Bit 805" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB804  ,Active Status Bit 804" "Not active,Active"
bitfld.long 0x00 3. "  ASB803  ,Active Status Bit 803" "Not active,Active"
bitfld.long 0x00 2. "  ASB802  ,Active Status Bit 802" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB801  ,Active Status Bit 801" "Not active,Active"
bitfld.long 0x00 0. "  ASB800  ,Active Status Bit 800" "Not active,Active"
else
rgroup.long 0x0364++0x03
line.long 0x0 "GICD_ICDABR25,Active Status Register 25"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)
rgroup.long 0x0368++0x03
line.long 0x0 "GICD_ICDABR26,Active Status Register 26"
bitfld.long 0x00 31. " ASB863  ,Active Status Bit 863" "Not active,Active"
bitfld.long 0x00 30. "  ASB862  ,Active Status Bit 862" "Not active,Active"
bitfld.long 0x00 29. "  ASB861  ,Active Status Bit 861" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB860  ,Active Status Bit 860" "Not active,Active"
bitfld.long 0x00 27. "  ASB859  ,Active Status Bit 859" "Not active,Active"
bitfld.long 0x00 26. "  ASB858  ,Active Status Bit 858" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB857  ,Active Status Bit 857" "Not active,Active"
bitfld.long 0x00 24. "  ASB856  ,Active Status Bit 856" "Not active,Active"
bitfld.long 0x00 23. "  ASB855  ,Active Status Bit 855" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB854  ,Active Status Bit 854" "Not active,Active"
bitfld.long 0x00 21. "  ASB853  ,Active Status Bit 853" "Not active,Active"
bitfld.long 0x00 20. "  ASB852  ,Active Status Bit 852" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB851  ,Active Status Bit 851" "Not active,Active"
bitfld.long 0x00 18. "  ASB850  ,Active Status Bit 850" "Not active,Active"
bitfld.long 0x00 17. "  ASB849  ,Active Status Bit 849" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB848  ,Active Status Bit 848" "Not active,Active"
bitfld.long 0x00 15. "  ASB847  ,Active Status Bit 847" "Not active,Active"
bitfld.long 0x00 14. "  ASB846  ,Active Status Bit 846" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB845  ,Active Status Bit 845" "Not active,Active"
bitfld.long 0x00 12. "  ASB844  ,Active Status Bit 844" "Not active,Active"
bitfld.long 0x00 11. "  ASB843  ,Active Status Bit 843" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB842  ,Active Status Bit 842" "Not active,Active"
bitfld.long 0x00 9. "  ASB841  ,Active Status Bit 841" "Not active,Active"
bitfld.long 0x00 8. "  ASB840  ,Active Status Bit 840" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB839  ,Active Status Bit 839" "Not active,Active"
bitfld.long 0x00 6. "  ASB838  ,Active Status Bit 838" "Not active,Active"
bitfld.long 0x00 5. "  ASB837  ,Active Status Bit 837" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB836  ,Active Status Bit 836" "Not active,Active"
bitfld.long 0x00 3. "  ASB835  ,Active Status Bit 835" "Not active,Active"
bitfld.long 0x00 2. "  ASB834  ,Active Status Bit 834" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB833  ,Active Status Bit 833" "Not active,Active"
bitfld.long 0x00 0. "  ASB832  ,Active Status Bit 832" "Not active,Active"
else
rgroup.long 0x0368++0x03
line.long 0x0 "GICD_ICDABR26,Active Status Register 26"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)
rgroup.long 0x036C++0x03
line.long 0x0 "GICD_ICDABR27,Active Status Register 27"
bitfld.long 0x00 31. " ASB895  ,Active Status Bit 895" "Not active,Active"
bitfld.long 0x00 30. "  ASB894  ,Active Status Bit 894" "Not active,Active"
bitfld.long 0x00 29. "  ASB893  ,Active Status Bit 893" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB892  ,Active Status Bit 892" "Not active,Active"
bitfld.long 0x00 27. "  ASB891  ,Active Status Bit 891" "Not active,Active"
bitfld.long 0x00 26. "  ASB890  ,Active Status Bit 890" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB889  ,Active Status Bit 889" "Not active,Active"
bitfld.long 0x00 24. "  ASB888  ,Active Status Bit 888" "Not active,Active"
bitfld.long 0x00 23. "  ASB887  ,Active Status Bit 887" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB886  ,Active Status Bit 886" "Not active,Active"
bitfld.long 0x00 21. "  ASB885  ,Active Status Bit 885" "Not active,Active"
bitfld.long 0x00 20. "  ASB884  ,Active Status Bit 884" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB883  ,Active Status Bit 883" "Not active,Active"
bitfld.long 0x00 18. "  ASB882  ,Active Status Bit 882" "Not active,Active"
bitfld.long 0x00 17. "  ASB881  ,Active Status Bit 881" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB880  ,Active Status Bit 880" "Not active,Active"
bitfld.long 0x00 15. "  ASB879  ,Active Status Bit 879" "Not active,Active"
bitfld.long 0x00 14. "  ASB878  ,Active Status Bit 878" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB877  ,Active Status Bit 877" "Not active,Active"
bitfld.long 0x00 12. "  ASB876  ,Active Status Bit 876" "Not active,Active"
bitfld.long 0x00 11. "  ASB875  ,Active Status Bit 875" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB874  ,Active Status Bit 874" "Not active,Active"
bitfld.long 0x00 9. "  ASB873  ,Active Status Bit 873" "Not active,Active"
bitfld.long 0x00 8. "  ASB872  ,Active Status Bit 872" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB871  ,Active Status Bit 871" "Not active,Active"
bitfld.long 0x00 6. "  ASB870  ,Active Status Bit 870" "Not active,Active"
bitfld.long 0x00 5. "  ASB869  ,Active Status Bit 869" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB868  ,Active Status Bit 868" "Not active,Active"
bitfld.long 0x00 3. "  ASB867  ,Active Status Bit 867" "Not active,Active"
bitfld.long 0x00 2. "  ASB866  ,Active Status Bit 866" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB865  ,Active Status Bit 865" "Not active,Active"
bitfld.long 0x00 0. "  ASB864  ,Active Status Bit 864" "Not active,Active"
else
rgroup.long 0x036C++0x03
line.long 0x0 "GICD_ICDABR27,Active Status Register 27"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)
rgroup.long 0x0370++0x03
line.long 0x0 "GICD_ICDABR28,Active Status Register 28"
bitfld.long 0x00 31. " ASB927  ,Active Status Bit 927" "Not active,Active"
bitfld.long 0x00 30. "  ASB926  ,Active Status Bit 926" "Not active,Active"
bitfld.long 0x00 29. "  ASB925  ,Active Status Bit 925" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB924  ,Active Status Bit 924" "Not active,Active"
bitfld.long 0x00 27. "  ASB923  ,Active Status Bit 923" "Not active,Active"
bitfld.long 0x00 26. "  ASB922  ,Active Status Bit 922" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB921  ,Active Status Bit 921" "Not active,Active"
bitfld.long 0x00 24. "  ASB920  ,Active Status Bit 920" "Not active,Active"
bitfld.long 0x00 23. "  ASB919  ,Active Status Bit 919" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB918  ,Active Status Bit 918" "Not active,Active"
bitfld.long 0x00 21. "  ASB917  ,Active Status Bit 917" "Not active,Active"
bitfld.long 0x00 20. "  ASB916  ,Active Status Bit 916" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB915  ,Active Status Bit 915" "Not active,Active"
bitfld.long 0x00 18. "  ASB914  ,Active Status Bit 914" "Not active,Active"
bitfld.long 0x00 17. "  ASB913  ,Active Status Bit 913" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB912  ,Active Status Bit 912" "Not active,Active"
bitfld.long 0x00 15. "  ASB911  ,Active Status Bit 911" "Not active,Active"
bitfld.long 0x00 14. "  ASB910  ,Active Status Bit 910" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB909  ,Active Status Bit 909" "Not active,Active"
bitfld.long 0x00 12. "  ASB908  ,Active Status Bit 908" "Not active,Active"
bitfld.long 0x00 11. "  ASB907  ,Active Status Bit 907" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB906  ,Active Status Bit 906" "Not active,Active"
bitfld.long 0x00 9. "  ASB905  ,Active Status Bit 905" "Not active,Active"
bitfld.long 0x00 8. "  ASB904  ,Active Status Bit 904" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB903  ,Active Status Bit 903" "Not active,Active"
bitfld.long 0x00 6. "  ASB902  ,Active Status Bit 902" "Not active,Active"
bitfld.long 0x00 5. "  ASB901  ,Active Status Bit 901" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB900  ,Active Status Bit 900" "Not active,Active"
bitfld.long 0x00 3. "  ASB899  ,Active Status Bit 899" "Not active,Active"
bitfld.long 0x00 2. "  ASB898  ,Active Status Bit 898" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB897  ,Active Status Bit 897" "Not active,Active"
bitfld.long 0x00 0. "  ASB896  ,Active Status Bit 896" "Not active,Active"
else
rgroup.long 0x0370++0x03
line.long 0x0 "GICD_ICDABR28,Active Status Register 28"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)
rgroup.long 0x0374++0x03
line.long 0x0 "GICD_ICDABR29,Active Status Register 29"
bitfld.long 0x00 31. " ASB959  ,Active Status Bit 959" "Not active,Active"
bitfld.long 0x00 30. "  ASB958  ,Active Status Bit 958" "Not active,Active"
bitfld.long 0x00 29. "  ASB957  ,Active Status Bit 957" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB956  ,Active Status Bit 956" "Not active,Active"
bitfld.long 0x00 27. "  ASB955  ,Active Status Bit 955" "Not active,Active"
bitfld.long 0x00 26. "  ASB954  ,Active Status Bit 954" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB953  ,Active Status Bit 953" "Not active,Active"
bitfld.long 0x00 24. "  ASB952  ,Active Status Bit 952" "Not active,Active"
bitfld.long 0x00 23. "  ASB951  ,Active Status Bit 951" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB950  ,Active Status Bit 950" "Not active,Active"
bitfld.long 0x00 21. "  ASB949  ,Active Status Bit 949" "Not active,Active"
bitfld.long 0x00 20. "  ASB948  ,Active Status Bit 948" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB947  ,Active Status Bit 947" "Not active,Active"
bitfld.long 0x00 18. "  ASB946  ,Active Status Bit 946" "Not active,Active"
bitfld.long 0x00 17. "  ASB945  ,Active Status Bit 945" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB944  ,Active Status Bit 944" "Not active,Active"
bitfld.long 0x00 15. "  ASB943  ,Active Status Bit 943" "Not active,Active"
bitfld.long 0x00 14. "  ASB942  ,Active Status Bit 942" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB941  ,Active Status Bit 941" "Not active,Active"
bitfld.long 0x00 12. "  ASB940  ,Active Status Bit 940" "Not active,Active"
bitfld.long 0x00 11. "  ASB939  ,Active Status Bit 939" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB938  ,Active Status Bit 938" "Not active,Active"
bitfld.long 0x00 9. "  ASB937  ,Active Status Bit 937" "Not active,Active"
bitfld.long 0x00 8. "  ASB936  ,Active Status Bit 936" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB935  ,Active Status Bit 935" "Not active,Active"
bitfld.long 0x00 6. "  ASB934  ,Active Status Bit 934" "Not active,Active"
bitfld.long 0x00 5. "  ASB933  ,Active Status Bit 933" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB932  ,Active Status Bit 932" "Not active,Active"
bitfld.long 0x00 3. "  ASB931  ,Active Status Bit 931" "Not active,Active"
bitfld.long 0x00 2. "  ASB930  ,Active Status Bit 930" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB929  ,Active Status Bit 929" "Not active,Active"
bitfld.long 0x00 0. "  ASB928  ,Active Status Bit 928" "Not active,Active"
else
rgroup.long 0x0374++0x03
line.long 0x0 "GICD_ICDABR29,Active Status Register 29"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)
rgroup.long 0x0378++0x03
line.long 0x0 "GICD_ICDABR30,Active Status Register 30"
bitfld.long 0x00 31. " ASB991  ,Active Status Bit 991" "Not active,Active"
bitfld.long 0x00 30. "  ASB990  ,Active Status Bit 990" "Not active,Active"
bitfld.long 0x00 29. "  ASB989  ,Active Status Bit 989" "Not active,Active"
textline "                                 "
bitfld.long 0x00 28. " ASB988  ,Active Status Bit 988" "Not active,Active"
bitfld.long 0x00 27. "  ASB987  ,Active Status Bit 987" "Not active,Active"
bitfld.long 0x00 26. "  ASB986  ,Active Status Bit 986" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB985  ,Active Status Bit 985" "Not active,Active"
bitfld.long 0x00 24. "  ASB984  ,Active Status Bit 984" "Not active,Active"
bitfld.long 0x00 23. "  ASB983  ,Active Status Bit 983" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB982  ,Active Status Bit 982" "Not active,Active"
bitfld.long 0x00 21. "  ASB981  ,Active Status Bit 981" "Not active,Active"
bitfld.long 0x00 20. "  ASB980  ,Active Status Bit 980" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB979  ,Active Status Bit 979" "Not active,Active"
bitfld.long 0x00 18. "  ASB978  ,Active Status Bit 978" "Not active,Active"
bitfld.long 0x00 17. "  ASB977  ,Active Status Bit 977" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB976  ,Active Status Bit 976" "Not active,Active"
bitfld.long 0x00 15. "  ASB975  ,Active Status Bit 975" "Not active,Active"
bitfld.long 0x00 14. "  ASB974  ,Active Status Bit 974" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB973  ,Active Status Bit 973" "Not active,Active"
bitfld.long 0x00 12. "  ASB972  ,Active Status Bit 972" "Not active,Active"
bitfld.long 0x00 11. "  ASB971  ,Active Status Bit 971" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB970  ,Active Status Bit 970" "Not active,Active"
bitfld.long 0x00 9. "  ASB969  ,Active Status Bit 969" "Not active,Active"
bitfld.long 0x00 8. "  ASB968  ,Active Status Bit 968" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB967  ,Active Status Bit 967" "Not active,Active"
bitfld.long 0x00 6. "  ASB966  ,Active Status Bit 966" "Not active,Active"
bitfld.long 0x00 5. "  ASB965  ,Active Status Bit 965" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB964  ,Active Status Bit 964" "Not active,Active"
bitfld.long 0x00 3. "  ASB963  ,Active Status Bit 963" "Not active,Active"
bitfld.long 0x00 2. "  ASB962  ,Active Status Bit 962" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB961  ,Active Status Bit 961" "Not active,Active"
bitfld.long 0x00 0. "  ASB960  ,Active Status Bit 960" "Not active,Active"
else
rgroup.long 0x0378++0x03
line.long 0x0 "GICD_ICDABR30,Active Status Register 30"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)==0x1F)
rgroup.long 0x037C++0x03
line.long 0x0 "GICD_ICDABR31,Active Status Register 31"
bitfld.long 0x00 27. " ASB1019 ,Active Status Bit 1019" "Not active,Active"
bitfld.long 0x00 26. "  ASB1018 ,Active Status Bit 1018" "Not active,Active"
textline "                                 "
bitfld.long 0x00 25. " ASB1017 ,Active Status Bit 1017" "Not active,Active"
bitfld.long 0x00 24. "  ASB1016 ,Active Status Bit 1016" "Not active,Active"
bitfld.long 0x00 23. "  ASB1015 ,Active Status Bit 1015" "Not active,Active"
textline "                                 "
bitfld.long 0x00 22. " ASB1014 ,Active Status Bit 1014" "Not active,Active"
bitfld.long 0x00 21. "  ASB1013 ,Active Status Bit 1013" "Not active,Active"
bitfld.long 0x00 20. "  ASB1012 ,Active Status Bit 1012" "Not active,Active"
textline "                                 "
bitfld.long 0x00 19. " ASB1011 ,Active Status Bit 1011" "Not active,Active"
bitfld.long 0x00 18. "  ASB1010 ,Active Status Bit 1010" "Not active,Active"
bitfld.long 0x00 17. "  ASB1009 ,Active Status Bit 1009" "Not active,Active"
textline "                                 "
bitfld.long 0x00 16. " ASB1008 ,Active Status Bit 1008" "Not active,Active"
bitfld.long 0x00 15. "  ASB1007 ,Active Status Bit 1007" "Not active,Active"
bitfld.long 0x00 14. "  ASB1006 ,Active Status Bit 1006" "Not active,Active"
textline "                                 "
bitfld.long 0x00 13. " ASB1005 ,Active Status Bit 1005" "Not active,Active"
bitfld.long 0x00 12. "  ASB1004 ,Active Status Bit 1004" "Not active,Active"
bitfld.long 0x00 11. "  ASB1003 ,Active Status Bit 1003" "Not active,Active"
textline "                                 "
bitfld.long 0x00 10. " ASB1002 ,Active Status Bit 1002" "Not active,Active"
bitfld.long 0x00 9. "  ASB1001 ,Active Status Bit 1001" "Not active,Active"
bitfld.long 0x00 8. "  ASB1000 ,Active Status Bit 1000" "Not active,Active"
textline "                                 "
bitfld.long 0x00 7. " ASB999  ,Active Status Bit 999" "Not active,Active"
bitfld.long 0x00 6. "  ASB998  ,Active Status Bit 998" "Not active,Active"
bitfld.long 0x00 5. "  ASB997  ,Active Status Bit 997" "Not active,Active"
textline "                                 "
bitfld.long 0x00 4. " ASB996  ,Active Status Bit 996" "Not active,Active"
bitfld.long 0x00 3. "  ASB995  ,Active Status Bit 995" "Not active,Active"
bitfld.long 0x00 2. "  ASB994  ,Active Status Bit 994" "Not active,Active"
textline "                                 "
bitfld.long 0x00 1. " ASB993  ,Active Status Bit 993" "Not active,Active"
bitfld.long 0x00 0. "  ASB992  ,Active Status Bit 992" "Not active,Active"
else
rgroup.long 0x037C++0x03
line.long 0x0 "GICD_ICDABR31,Active Status Register 31"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
else
group.long 0x0300++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER0,Interrupt Set/Clear Active Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE31  ,Set/Clear Active Bit 31" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE30  ,Set/Clear Active Bit 30" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE29  ,Set/Clear Active Bit 29" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE28  ,Set/Clear Active Bit 28" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE27  ,Set/Clear Active Bit 27" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE26  ,Set/Clear Active Bit 26" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE25  ,Set/Clear Active Bit 25" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE24  ,Set/Clear Active Bit 24" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE23  ,Set/Clear Active Bit 23" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE22  ,Set/Clear Active Bit 22" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE21  ,Set/Clear Active Bit 21" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE20  ,Set/Clear Active Bit 20" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE19  ,Set/Clear Active Bit 19" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE18  ,Set/Clear Active Bit 18" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE17  ,Set/Clear Active Bit 17" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE16  ,Set/Clear Active Bit 16" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE15  ,Set/Clear Active Bit 15" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE14  ,Set/Clear Active Bit 14" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE13  ,Set/Clear Active Bit 13" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE12  ,Set/Clear Active Bit 12" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE11  ,Set/Clear Active Bit 11" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE10  ,Set/Clear Active Bit 10" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE9   ,Set/Clear Active Bit 9" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE8   ,Set/Clear Active Bit 8" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE7   ,Set/Clear Active Bit 7" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE6   ,Set/Clear Active Bit 6" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE5   ,Set/Clear Active Bit 5" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE4   ,Set/Clear Active Bit 4" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE3   ,Set/Clear Active Bit 3" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE2   ,Set/Clear Active Bit 2" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE1   ,Set/Clear Active Bit 1" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE0   ,Set/Clear Active Bit 0" "Not active,Active"
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)
group.long 0x0304++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER1,Interrupt Set/Clear Active Register 1"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE63  ,Set/Clear Active Bit 63" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE62  ,Set/Clear Active Bit 62" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE61  ,Set/Clear Active Bit 61" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE60  ,Set/Clear Active Bit 60" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE59  ,Set/Clear Active Bit 59" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE58  ,Set/Clear Active Bit 58" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE57  ,Set/Clear Active Bit 57" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE56  ,Set/Clear Active Bit 56" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE55  ,Set/Clear Active Bit 55" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE54  ,Set/Clear Active Bit 54" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE53  ,Set/Clear Active Bit 53" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE52  ,Set/Clear Active Bit 52" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE51  ,Set/Clear Active Bit 51" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE50  ,Set/Clear Active Bit 50" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE49  ,Set/Clear Active Bit 49" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE48  ,Set/Clear Active Bit 48" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE47  ,Set/Clear Active Bit 47" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE46  ,Set/Clear Active Bit 46" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE45  ,Set/Clear Active Bit 45" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE44  ,Set/Clear Active Bit 44" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE43  ,Set/Clear Active Bit 43" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE42  ,Set/Clear Active Bit 42" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE41  ,Set/Clear Active Bit 41" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE40  ,Set/Clear Active Bit 40" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE39  ,Set/Clear Active Bit 39" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE38  ,Set/Clear Active Bit 38" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE37  ,Set/Clear Active Bit 37" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE36  ,Set/Clear Active Bit 36" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE35  ,Set/Clear Active Bit 35" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE34  ,Set/Clear Active Bit 34" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE33  ,Set/Clear Active Bit 33" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE32  ,Set/Clear Active Bit 32" "Not active,Active"
else
rgroup.long 0x0304++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER1,Interrupt Set/Clear Active Register 1"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)
group.long 0x0308++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER2,Interrupt Set/Clear Active Register 2"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE95  ,Set/Clear Active Bit 95" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE94  ,Set/Clear Active Bit 94" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE93  ,Set/Clear Active Bit 93" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE92  ,Set/Clear Active Bit 92" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE91  ,Set/Clear Active Bit 91" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE90  ,Set/Clear Active Bit 90" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE89  ,Set/Clear Active Bit 89" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE88  ,Set/Clear Active Bit 88" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE87  ,Set/Clear Active Bit 87" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE86  ,Set/Clear Active Bit 86" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE85  ,Set/Clear Active Bit 85" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE84  ,Set/Clear Active Bit 84" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE83  ,Set/Clear Active Bit 83" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE82  ,Set/Clear Active Bit 82" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE81  ,Set/Clear Active Bit 81" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE80  ,Set/Clear Active Bit 80" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE79  ,Set/Clear Active Bit 79" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE78  ,Set/Clear Active Bit 78" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE77  ,Set/Clear Active Bit 77" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE76  ,Set/Clear Active Bit 76" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE75  ,Set/Clear Active Bit 75" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE74  ,Set/Clear Active Bit 74" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE73  ,Set/Clear Active Bit 73" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE72  ,Set/Clear Active Bit 72" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE71  ,Set/Clear Active Bit 71" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE70  ,Set/Clear Active Bit 70" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE69  ,Set/Clear Active Bit 69" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE68  ,Set/Clear Active Bit 68" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE67  ,Set/Clear Active Bit 67" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE66  ,Set/Clear Active Bit 66" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE65  ,Set/Clear Active Bit 65" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE64  ,Set/Clear Active Bit 64" "Not active,Active"
else
rgroup.long 0x0308++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER2,Interrupt Set/Clear Active Register 2"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)
group.long 0x030C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER3,Interrupt Set/Clear Active Register 3"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE127 ,Set/Clear Active Bit 127" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE126 ,Set/Clear Active Bit 126" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE125 ,Set/Clear Active Bit 125" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE124 ,Set/Clear Active Bit 124" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE123 ,Set/Clear Active Bit 123" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE122 ,Set/Clear Active Bit 122" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE121 ,Set/Clear Active Bit 121" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE120 ,Set/Clear Active Bit 120" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE119 ,Set/Clear Active Bit 119" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE118 ,Set/Clear Active Bit 118" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE117 ,Set/Clear Active Bit 117" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE116 ,Set/Clear Active Bit 116" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE115 ,Set/Clear Active Bit 115" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE114 ,Set/Clear Active Bit 114" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE113 ,Set/Clear Active Bit 113" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE112 ,Set/Clear Active Bit 112" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE111 ,Set/Clear Active Bit 111" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE110 ,Set/Clear Active Bit 110" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE109 ,Set/Clear Active Bit 109" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE108 ,Set/Clear Active Bit 108" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE107 ,Set/Clear Active Bit 107" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE106 ,Set/Clear Active Bit 106" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE105 ,Set/Clear Active Bit 105" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE104 ,Set/Clear Active Bit 104" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE103 ,Set/Clear Active Bit 103" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE102 ,Set/Clear Active Bit 102" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE101 ,Set/Clear Active Bit 101" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE100 ,Set/Clear Active Bit 100" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE99  ,Set/Clear Active Bit 99" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE98  ,Set/Clear Active Bit 98" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE97  ,Set/Clear Active Bit 97" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE96  ,Set/Clear Active Bit 96" "Not active,Active"
else
rgroup.long 0x030C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER3,Interrupt Set/Clear Active Register 3"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)
group.long 0x0310++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER4,Interrupt Set/Clear Active Register 4"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE159 ,Set/Clear Active Bit 159" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE158 ,Set/Clear Active Bit 158" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE157 ,Set/Clear Active Bit 157" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE156 ,Set/Clear Active Bit 156" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE155 ,Set/Clear Active Bit 155" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE154 ,Set/Clear Active Bit 154" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE153 ,Set/Clear Active Bit 153" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE152 ,Set/Clear Active Bit 152" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE151 ,Set/Clear Active Bit 151" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE150 ,Set/Clear Active Bit 150" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE149 ,Set/Clear Active Bit 149" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE148 ,Set/Clear Active Bit 148" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE147 ,Set/Clear Active Bit 147" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE146 ,Set/Clear Active Bit 146" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE145 ,Set/Clear Active Bit 145" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE144 ,Set/Clear Active Bit 144" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE143 ,Set/Clear Active Bit 143" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE142 ,Set/Clear Active Bit 142" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE141 ,Set/Clear Active Bit 141" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE140 ,Set/Clear Active Bit 140" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE139 ,Set/Clear Active Bit 139" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE138 ,Set/Clear Active Bit 138" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE137 ,Set/Clear Active Bit 137" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE136 ,Set/Clear Active Bit 136" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE135 ,Set/Clear Active Bit 135" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE134 ,Set/Clear Active Bit 134" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE133 ,Set/Clear Active Bit 133" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE132 ,Set/Clear Active Bit 132" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE131 ,Set/Clear Active Bit 131" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE130 ,Set/Clear Active Bit 130" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE129 ,Set/Clear Active Bit 129" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE128 ,Set/Clear Active Bit 128" "Not active,Active"
else
rgroup.long 0x0310++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER4,Interrupt Set/Clear Active Register 4"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)
group.long 0x0314++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER5,Interrupt Set/Clear Active Register 5"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE191 ,Set/Clear Active Bit 191" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE190 ,Set/Clear Active Bit 190" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE189 ,Set/Clear Active Bit 189" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE188 ,Set/Clear Active Bit 188" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE187 ,Set/Clear Active Bit 187" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE186 ,Set/Clear Active Bit 186" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE185 ,Set/Clear Active Bit 185" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE184 ,Set/Clear Active Bit 184" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE183 ,Set/Clear Active Bit 183" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE182 ,Set/Clear Active Bit 182" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE181 ,Set/Clear Active Bit 181" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE180 ,Set/Clear Active Bit 180" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE179 ,Set/Clear Active Bit 179" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE178 ,Set/Clear Active Bit 178" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE177 ,Set/Clear Active Bit 177" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE176 ,Set/Clear Active Bit 176" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE175 ,Set/Clear Active Bit 175" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE174 ,Set/Clear Active Bit 174" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE173 ,Set/Clear Active Bit 173" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE172 ,Set/Clear Active Bit 172" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE171 ,Set/Clear Active Bit 171" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE170 ,Set/Clear Active Bit 170" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE169 ,Set/Clear Active Bit 169" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE168 ,Set/Clear Active Bit 168" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE167 ,Set/Clear Active Bit 167" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE166 ,Set/Clear Active Bit 166" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE165 ,Set/Clear Active Bit 165" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE164 ,Set/Clear Active Bit 164" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE163 ,Set/Clear Active Bit 163" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE162 ,Set/Clear Active Bit 162" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE161 ,Set/Clear Active Bit 161" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE160 ,Set/Clear Active Bit 160" "Not active,Active"
else
rgroup.long 0x0314++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER5,Interrupt Set/Clear Active Register 5"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)
group.long 0x0318++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER6,Interrupt Set/Clear Active Register 6"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE223 ,Set/Clear Active Bit 223" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE222 ,Set/Clear Active Bit 222" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE221 ,Set/Clear Active Bit 221" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE220 ,Set/Clear Active Bit 220" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE219 ,Set/Clear Active Bit 219" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE218 ,Set/Clear Active Bit 218" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE217 ,Set/Clear Active Bit 217" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE216 ,Set/Clear Active Bit 216" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE215 ,Set/Clear Active Bit 215" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE214 ,Set/Clear Active Bit 214" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE213 ,Set/Clear Active Bit 213" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE212 ,Set/Clear Active Bit 212" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE211 ,Set/Clear Active Bit 211" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE210 ,Set/Clear Active Bit 210" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE209 ,Set/Clear Active Bit 209" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE208 ,Set/Clear Active Bit 208" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE207 ,Set/Clear Active Bit 207" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE206 ,Set/Clear Active Bit 206" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE205 ,Set/Clear Active Bit 205" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE204 ,Set/Clear Active Bit 204" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE203 ,Set/Clear Active Bit 203" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE202 ,Set/Clear Active Bit 202" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE201 ,Set/Clear Active Bit 201" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE200 ,Set/Clear Active Bit 200" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE199 ,Set/Clear Active Bit 199" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE198 ,Set/Clear Active Bit 198" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE197 ,Set/Clear Active Bit 197" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE196 ,Set/Clear Active Bit 196" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE195 ,Set/Clear Active Bit 195" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE194 ,Set/Clear Active Bit 194" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE193 ,Set/Clear Active Bit 193" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE192 ,Set/Clear Active Bit 192" "Not active,Active"
else
rgroup.long 0x0318++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER6,Interrupt Set/Clear Active Register 6"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)
group.long 0x031C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER7,Interrupt Set/Clear Active Register 7"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE255 ,Set/Clear Active Bit 255" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE254 ,Set/Clear Active Bit 254" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE253 ,Set/Clear Active Bit 253" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE252 ,Set/Clear Active Bit 252" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE251 ,Set/Clear Active Bit 251" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE250 ,Set/Clear Active Bit 250" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE249 ,Set/Clear Active Bit 249" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE248 ,Set/Clear Active Bit 248" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE247 ,Set/Clear Active Bit 247" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE246 ,Set/Clear Active Bit 246" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE245 ,Set/Clear Active Bit 245" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE244 ,Set/Clear Active Bit 244" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE243 ,Set/Clear Active Bit 243" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE242 ,Set/Clear Active Bit 242" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE241 ,Set/Clear Active Bit 241" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE240 ,Set/Clear Active Bit 240" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE239 ,Set/Clear Active Bit 239" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE238 ,Set/Clear Active Bit 238" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE237 ,Set/Clear Active Bit 237" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE236 ,Set/Clear Active Bit 236" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE235 ,Set/Clear Active Bit 235" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE234 ,Set/Clear Active Bit 234" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE233 ,Set/Clear Active Bit 233" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE232 ,Set/Clear Active Bit 232" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE231 ,Set/Clear Active Bit 231" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE230 ,Set/Clear Active Bit 230" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE229 ,Set/Clear Active Bit 229" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE228 ,Set/Clear Active Bit 228" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE227 ,Set/Clear Active Bit 227" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE226 ,Set/Clear Active Bit 226" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE225 ,Set/Clear Active Bit 225" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE224 ,Set/Clear Active Bit 224" "Not active,Active"
else
rgroup.long 0x031C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER7,Interrupt Set/Clear Active Register 7"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)
group.long 0x0320++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER8,Interrupt Set/Clear Active Register 8"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE287 ,Set/Clear Active Bit 287" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE286 ,Set/Clear Active Bit 286" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE285 ,Set/Clear Active Bit 285" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE284 ,Set/Clear Active Bit 284" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE283 ,Set/Clear Active Bit 283" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE282 ,Set/Clear Active Bit 282" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE281 ,Set/Clear Active Bit 281" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE280 ,Set/Clear Active Bit 280" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE279 ,Set/Clear Active Bit 279" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE278 ,Set/Clear Active Bit 278" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE277 ,Set/Clear Active Bit 277" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE276 ,Set/Clear Active Bit 276" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE275 ,Set/Clear Active Bit 275" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE274 ,Set/Clear Active Bit 274" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE273 ,Set/Clear Active Bit 273" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE272 ,Set/Clear Active Bit 272" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE271 ,Set/Clear Active Bit 271" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE270 ,Set/Clear Active Bit 270" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE269 ,Set/Clear Active Bit 269" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE268 ,Set/Clear Active Bit 268" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE267 ,Set/Clear Active Bit 267" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE266 ,Set/Clear Active Bit 266" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE265 ,Set/Clear Active Bit 265" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE264 ,Set/Clear Active Bit 264" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE263 ,Set/Clear Active Bit 263" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE262 ,Set/Clear Active Bit 262" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE261 ,Set/Clear Active Bit 261" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE260 ,Set/Clear Active Bit 260" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE259 ,Set/Clear Active Bit 259" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE258 ,Set/Clear Active Bit 258" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE257 ,Set/Clear Active Bit 257" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE256 ,Set/Clear Active Bit 256" "Not active,Active"
else
rgroup.long 0x0320++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER8,Interrupt Set/Clear Active Register 8"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)
group.long 0x0324++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER9,Interrupt Set/Clear Active Register 9"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE319 ,Set/Clear Active Bit 319" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE318 ,Set/Clear Active Bit 318" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE317 ,Set/Clear Active Bit 317" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE316 ,Set/Clear Active Bit 316" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE315 ,Set/Clear Active Bit 315" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE314 ,Set/Clear Active Bit 314" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE313 ,Set/Clear Active Bit 313" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE312 ,Set/Clear Active Bit 312" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE311 ,Set/Clear Active Bit 311" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE310 ,Set/Clear Active Bit 310" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE309 ,Set/Clear Active Bit 309" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE308 ,Set/Clear Active Bit 308" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE307 ,Set/Clear Active Bit 307" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE306 ,Set/Clear Active Bit 306" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE305 ,Set/Clear Active Bit 305" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE304 ,Set/Clear Active Bit 304" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE303 ,Set/Clear Active Bit 303" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE302 ,Set/Clear Active Bit 302" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE301 ,Set/Clear Active Bit 301" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE300 ,Set/Clear Active Bit 300" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE299 ,Set/Clear Active Bit 299" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE298 ,Set/Clear Active Bit 298" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE297 ,Set/Clear Active Bit 297" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE296 ,Set/Clear Active Bit 296" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE295 ,Set/Clear Active Bit 295" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE294 ,Set/Clear Active Bit 294" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE293 ,Set/Clear Active Bit 293" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE292 ,Set/Clear Active Bit 292" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE291 ,Set/Clear Active Bit 291" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE290 ,Set/Clear Active Bit 290" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE289 ,Set/Clear Active Bit 289" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE288 ,Set/Clear Active Bit 288" "Not active,Active"
else
rgroup.long 0x0324++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER9,Interrupt Set/Clear Active Register 9"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)
group.long 0x0328++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER10,Interrupt Set/Clear Active Register 10"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE351 ,Set/Clear Active Bit 351" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE350 ,Set/Clear Active Bit 350" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE349 ,Set/Clear Active Bit 349" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE348 ,Set/Clear Active Bit 348" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE347 ,Set/Clear Active Bit 347" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE346 ,Set/Clear Active Bit 346" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE345 ,Set/Clear Active Bit 345" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE344 ,Set/Clear Active Bit 344" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE343 ,Set/Clear Active Bit 343" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE342 ,Set/Clear Active Bit 342" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE341 ,Set/Clear Active Bit 341" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE340 ,Set/Clear Active Bit 340" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE339 ,Set/Clear Active Bit 339" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE338 ,Set/Clear Active Bit 338" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE337 ,Set/Clear Active Bit 337" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE336 ,Set/Clear Active Bit 336" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE335 ,Set/Clear Active Bit 335" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE334 ,Set/Clear Active Bit 334" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE333 ,Set/Clear Active Bit 333" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE332 ,Set/Clear Active Bit 332" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE331 ,Set/Clear Active Bit 331" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE330 ,Set/Clear Active Bit 330" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE329 ,Set/Clear Active Bit 329" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE328 ,Set/Clear Active Bit 328" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE327 ,Set/Clear Active Bit 327" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE326 ,Set/Clear Active Bit 326" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE325 ,Set/Clear Active Bit 325" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE324 ,Set/Clear Active Bit 324" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE323 ,Set/Clear Active Bit 323" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE322 ,Set/Clear Active Bit 322" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE321 ,Set/Clear Active Bit 321" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE320 ,Set/Clear Active Bit 320" "Not active,Active"
else
rgroup.long 0x0328++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER10,Interrupt Set/Clear Active Register 10"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)
group.long 0x032C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER11,Interrupt Set/Clear Active Register 11"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE383 ,Set/Clear Active Bit 383" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE382 ,Set/Clear Active Bit 382" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE381 ,Set/Clear Active Bit 381" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE380 ,Set/Clear Active Bit 380" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE379 ,Set/Clear Active Bit 379" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE378 ,Set/Clear Active Bit 378" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE377 ,Set/Clear Active Bit 377" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE376 ,Set/Clear Active Bit 376" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE375 ,Set/Clear Active Bit 375" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE374 ,Set/Clear Active Bit 374" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE373 ,Set/Clear Active Bit 373" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE372 ,Set/Clear Active Bit 372" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE371 ,Set/Clear Active Bit 371" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE370 ,Set/Clear Active Bit 370" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE369 ,Set/Clear Active Bit 369" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE368 ,Set/Clear Active Bit 368" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE367 ,Set/Clear Active Bit 367" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE366 ,Set/Clear Active Bit 366" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE365 ,Set/Clear Active Bit 365" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE364 ,Set/Clear Active Bit 364" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE363 ,Set/Clear Active Bit 363" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE362 ,Set/Clear Active Bit 362" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE361 ,Set/Clear Active Bit 361" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE360 ,Set/Clear Active Bit 360" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE359 ,Set/Clear Active Bit 359" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE358 ,Set/Clear Active Bit 358" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE357 ,Set/Clear Active Bit 357" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE356 ,Set/Clear Active Bit 356" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE355 ,Set/Clear Active Bit 355" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE354 ,Set/Clear Active Bit 354" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE353 ,Set/Clear Active Bit 353" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE352 ,Set/Clear Active Bit 352" "Not active,Active"
else
rgroup.long 0x032C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER11,Interrupt Set/Clear Active Register 11"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)
group.long 0x0330++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER12,Interrupt Set/Clear Active Register 12"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE415 ,Set/Clear Active Bit 415" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE414 ,Set/Clear Active Bit 414" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE413 ,Set/Clear Active Bit 413" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE412 ,Set/Clear Active Bit 412" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE411 ,Set/Clear Active Bit 411" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE410 ,Set/Clear Active Bit 410" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE409 ,Set/Clear Active Bit 409" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE408 ,Set/Clear Active Bit 408" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE407 ,Set/Clear Active Bit 407" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE406 ,Set/Clear Active Bit 406" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE405 ,Set/Clear Active Bit 405" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE404 ,Set/Clear Active Bit 404" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE403 ,Set/Clear Active Bit 403" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE402 ,Set/Clear Active Bit 402" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE401 ,Set/Clear Active Bit 401" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE400 ,Set/Clear Active Bit 400" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE399 ,Set/Clear Active Bit 399" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE398 ,Set/Clear Active Bit 398" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE397 ,Set/Clear Active Bit 397" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE396 ,Set/Clear Active Bit 396" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE395 ,Set/Clear Active Bit 395" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE394 ,Set/Clear Active Bit 394" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE393 ,Set/Clear Active Bit 393" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE392 ,Set/Clear Active Bit 392" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE391 ,Set/Clear Active Bit 391" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE390 ,Set/Clear Active Bit 390" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE389 ,Set/Clear Active Bit 389" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE388 ,Set/Clear Active Bit 388" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE387 ,Set/Clear Active Bit 387" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE386 ,Set/Clear Active Bit 386" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE385 ,Set/Clear Active Bit 385" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE384 ,Set/Clear Active Bit 384" "Not active,Active"
else
rgroup.long 0x0330++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER12,Interrupt Set/Clear Active Register 12"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)
group.long 0x0334++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER13,Interrupt Set/Clear Active Register 13"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE447 ,Set/Clear Active Bit 447" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE446 ,Set/Clear Active Bit 446" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE445 ,Set/Clear Active Bit 445" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE444 ,Set/Clear Active Bit 444" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE443 ,Set/Clear Active Bit 443" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE442 ,Set/Clear Active Bit 442" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE441 ,Set/Clear Active Bit 441" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE440 ,Set/Clear Active Bit 440" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE439 ,Set/Clear Active Bit 439" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE438 ,Set/Clear Active Bit 438" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE437 ,Set/Clear Active Bit 437" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE436 ,Set/Clear Active Bit 436" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE435 ,Set/Clear Active Bit 435" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE434 ,Set/Clear Active Bit 434" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE433 ,Set/Clear Active Bit 433" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE432 ,Set/Clear Active Bit 432" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE431 ,Set/Clear Active Bit 431" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE430 ,Set/Clear Active Bit 430" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE429 ,Set/Clear Active Bit 429" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE428 ,Set/Clear Active Bit 428" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE427 ,Set/Clear Active Bit 427" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE426 ,Set/Clear Active Bit 426" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE425 ,Set/Clear Active Bit 425" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE424 ,Set/Clear Active Bit 424" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE423 ,Set/Clear Active Bit 423" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE422 ,Set/Clear Active Bit 422" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE421 ,Set/Clear Active Bit 421" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE420 ,Set/Clear Active Bit 420" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE419 ,Set/Clear Active Bit 419" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE418 ,Set/Clear Active Bit 418" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE417 ,Set/Clear Active Bit 417" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE416 ,Set/Clear Active Bit 416" "Not active,Active"
else
rgroup.long 0x0334++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER13,Interrupt Set/Clear Active Register 13"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)
group.long 0x0338++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER14,Interrupt Set/Clear Active Register 14"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE479 ,Set/Clear Active Bit 479" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE478 ,Set/Clear Active Bit 478" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE477 ,Set/Clear Active Bit 477" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE476 ,Set/Clear Active Bit 476" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE475 ,Set/Clear Active Bit 475" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE474 ,Set/Clear Active Bit 474" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE473 ,Set/Clear Active Bit 473" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE472 ,Set/Clear Active Bit 472" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE471 ,Set/Clear Active Bit 471" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE470 ,Set/Clear Active Bit 470" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE469 ,Set/Clear Active Bit 469" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE468 ,Set/Clear Active Bit 468" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE467 ,Set/Clear Active Bit 467" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE466 ,Set/Clear Active Bit 466" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE465 ,Set/Clear Active Bit 465" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE464 ,Set/Clear Active Bit 464" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE463 ,Set/Clear Active Bit 463" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE462 ,Set/Clear Active Bit 462" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE461 ,Set/Clear Active Bit 461" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE460 ,Set/Clear Active Bit 460" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE459 ,Set/Clear Active Bit 459" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE458 ,Set/Clear Active Bit 458" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE457 ,Set/Clear Active Bit 457" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE456 ,Set/Clear Active Bit 456" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE455 ,Set/Clear Active Bit 455" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE454 ,Set/Clear Active Bit 454" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE453 ,Set/Clear Active Bit 453" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE452 ,Set/Clear Active Bit 452" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE451 ,Set/Clear Active Bit 451" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE450 ,Set/Clear Active Bit 450" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE449 ,Set/Clear Active Bit 449" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE448 ,Set/Clear Active Bit 448" "Not active,Active"
else
rgroup.long 0x0338++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER14,Interrupt Set/Clear Active Register 14"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)
group.long 0x033C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER15,Interrupt Set/Clear Active Register 15"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE511 ,Set/Clear Active Bit 511" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRACTIVE510 ,Set/Clear Active Bit 510" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRACTIVE509 ,Set/Clear Active Bit 509" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE508 ,Set/Clear Active Bit 508" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRACTIVE507 ,Set/Clear Active Bit 507" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRACTIVE506 ,Set/Clear Active Bit 506" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE505 ,Set/Clear Active Bit 505" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRACTIVE504 ,Set/Clear Active Bit 504" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRACTIVE503 ,Set/Clear Active Bit 503" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE502 ,Set/Clear Active Bit 502" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRACTIVE501 ,Set/Clear Active Bit 501" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRACTIVE500 ,Set/Clear Active Bit 500" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE499 ,Set/Clear Active Bit 499" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRACTIVE498 ,Set/Clear Active Bit 498" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRACTIVE497 ,Set/Clear Active Bit 497" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE496 ,Set/Clear Active Bit 496" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRACTIVE495 ,Set/Clear Active Bit 495" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRACTIVE494 ,Set/Clear Active Bit 494" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE493 ,Set/Clear Active Bit 493" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRACTIVE492 ,Set/Clear Active Bit 492" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRACTIVE491 ,Set/Clear Active Bit 491" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE490 ,Set/Clear Active Bit 490" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRACTIVE489 ,Set/Clear Active Bit 489" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRACTIVE488 ,Set/Clear Active Bit 488" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE487 ,Set/Clear Active Bit 487" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRACTIVE486 ,Set/Clear Active Bit 486" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRACTIVE485 ,Set/Clear Active Bit 485" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE484 ,Set/Clear Active Bit 484" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRACTIVE483 ,Set/Clear Active Bit 483" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRACTIVE482 ,Set/Clear Active Bit 482" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE481 ,Set/Clear Active Bit 481" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRACTIVE480 ,Set/Clear Active Bit 480" "Not active,Active"
else
rgroup.long 0x033C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER15,Interrupt Set/Clear Active Register 15"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
rgroup.long 0x0340++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER16,Interrupt Set/Clear Active Register 16"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0344++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER17,Interrupt Set/Clear Active Register 17"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0348++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER18,Interrupt Set/Clear Active Register 18"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x034C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER19,Interrupt Set/Clear Active Register 19"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0350++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER20,Interrupt Set/Clear Active Register 20"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0354++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER21,Interrupt Set/Clear Active Register 21"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0358++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER22,Interrupt Set/Clear Active Register 22"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x035C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER23,Interrupt Set/Clear Active Register 23"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0360++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER24,Interrupt Set/Clear Active Register 24"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0364++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER25,Interrupt Set/Clear Active Register 25"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0368++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER26,Interrupt Set/Clear Active Register 26"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x036C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER27,Interrupt Set/Clear Active Register 27"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0370++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER28,Interrupt Set/Clear Active Register 28"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0374++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER29,Interrupt Set/Clear Active Register 29"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x0378++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER30,Interrupt Set/Clear Active Register 30"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
rgroup.long 0x037C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER31,Interrupt Set/Clear Active Register 31"
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
textline "                                 "
endif
tree.end
tree "Priority Registers"
group.long 0x400++0x03
line.long 0x00 "GICD_IPRIORITYR0,Interrupt Priority Register 0"
hexmask.long.byte 0x00 24.--31. 1. " INTID3    ,Interrupt ID3    Priority/Priority Byte Offset 3   "
hexmask.long.byte 0x00 16.--23. 1. "  INTID2    ,Interrupt ID2     Priority/Priority Byte Offset 2   "
hexmask.long.byte 0x00 8.--15. 1. "  INTID1    ,Interrupt ID1    Priority/Priority Byte Offset 1   "
hexmask.long.byte 0x00 0.--7. 1. "  INTID0    ,Interrupt ID0     Priority/Priority Byte Offset 0   "
group.long 0x404++0x03
line.long 0x00 "GICD_IPRIORITYR1,Interrupt Priority Register 1"
hexmask.long.byte 0x00 24.--31. 1. " INTID7    ,Interrupt ID7    Priority/Priority Byte Offset 7   "
hexmask.long.byte 0x00 16.--23. 1. "  INTID6    ,Interrupt ID6     Priority/Priority Byte Offset 6   "
hexmask.long.byte 0x00 8.--15. 1. "  INTID5    ,Interrupt ID5    Priority/Priority Byte Offset 5   "
hexmask.long.byte 0x00 0.--7. 1. "  INTID4    ,Interrupt ID4     Priority/Priority Byte Offset 4   "
group.long 0x408++0x03
line.long 0x00 "GICD_IPRIORITYR2,Interrupt Priority Register 2"
hexmask.long.byte 0x00 24.--31. 1. " INTID11   ,Interrupt ID11   Priority/Priority Byte Offset 11  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID10   ,Interrupt ID10    Priority/Priority Byte Offset 10  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID9    ,Interrupt ID9    Priority/Priority Byte Offset 9   "
hexmask.long.byte 0x00 0.--7. 1. "  INTID8    ,Interrupt ID8     Priority/Priority Byte Offset 8   "
group.long 0x40C++0x03
line.long 0x00 "GICD_IPRIORITYR3,Interrupt Priority Register 3"
hexmask.long.byte 0x00 24.--31. 1. " INTID15   ,Interrupt ID15   Priority/Priority Byte Offset 15  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID14   ,Interrupt ID14    Priority/Priority Byte Offset 14  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID13   ,Interrupt ID13   Priority/Priority Byte Offset 13  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID12   ,Interrupt ID12    Priority/Priority Byte Offset 12  "
group.long 0x410++0x03
line.long 0x00 "GICD_IPRIORITYR4,Interrupt Priority Register 4"
hexmask.long.byte 0x00 24.--31. 1. " INTID19   ,Interrupt ID19   Priority/Priority Byte Offset 19  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID18   ,Interrupt ID18    Priority/Priority Byte Offset 18  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID17   ,Interrupt ID17   Priority/Priority Byte Offset 17  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID16   ,Interrupt ID16    Priority/Priority Byte Offset 16  "
group.long 0x414++0x03
line.long 0x00 "GICD_IPRIORITYR5,Interrupt Priority Register 5"
hexmask.long.byte 0x00 24.--31. 1. " INTID23   ,Interrupt ID23   Priority/Priority Byte Offset 23  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID22   ,Interrupt ID22    Priority/Priority Byte Offset 22  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID21   ,Interrupt ID21   Priority/Priority Byte Offset 21  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID20   ,Interrupt ID20    Priority/Priority Byte Offset 20  "
group.long 0x418++0x03
line.long 0x00 "GICD_IPRIORITYR6,Interrupt Priority Register 6"
hexmask.long.byte 0x00 24.--31. 1. " INTID27   ,Interrupt ID27   Priority/Priority Byte Offset 27  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID26   ,Interrupt ID26    Priority/Priority Byte Offset 26  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID25   ,Interrupt ID25   Priority/Priority Byte Offset 25  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID24   ,Interrupt ID24    Priority/Priority Byte Offset 24  "
group.long 0x41C++0x03
line.long 0x00 "GICD_IPRIORITYR7,Interrupt Priority Register 7"
hexmask.long.byte 0x00 24.--31. 1. " INTID31   ,Interrupt ID31   Priority/Priority Byte Offset 31  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID30   ,Interrupt ID30    Priority/Priority Byte Offset 30  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID29   ,Interrupt ID29   Priority/Priority Byte Offset 29  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID28   ,Interrupt ID28    Priority/Priority Byte Offset 28  "
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)
group.long 0x420++0x03
line.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8"
hexmask.long.byte 0x00 24.--31. 1. " INTID35   ,Interrupt ID35   Priority/Priority Byte Offset 35  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID34   ,Interrupt ID34    Priority/Priority Byte Offset 34  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID33   ,Interrupt ID33   Priority/Priority Byte Offset 33  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID32   ,Interrupt ID32    Priority/Priority Byte Offset 32  "
group.long 0x424++0x03
line.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9"
hexmask.long.byte 0x00 24.--31. 1. " INTID39   ,Interrupt ID39   Priority/Priority Byte Offset 39  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID38   ,Interrupt ID38    Priority/Priority Byte Offset 38  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID37   ,Interrupt ID37   Priority/Priority Byte Offset 37  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID36   ,Interrupt ID36    Priority/Priority Byte Offset 36  "
group.long 0x428++0x03
line.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10"
hexmask.long.byte 0x00 24.--31. 1. " INTID43   ,Interrupt ID43   Priority/Priority Byte Offset 43  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID42   ,Interrupt ID42    Priority/Priority Byte Offset 42  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID41   ,Interrupt ID41   Priority/Priority Byte Offset 41  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID40   ,Interrupt ID40    Priority/Priority Byte Offset 40  "
group.long 0x42C++0x03
line.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11"
hexmask.long.byte 0x00 24.--31. 1. " INTID47   ,Interrupt ID47   Priority/Priority Byte Offset 47  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID46   ,Interrupt ID46    Priority/Priority Byte Offset 46  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID45   ,Interrupt ID45   Priority/Priority Byte Offset 45  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID44   ,Interrupt ID44    Priority/Priority Byte Offset 44  "
group.long 0x430++0x03
line.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12"
hexmask.long.byte 0x00 24.--31. 1. " INTID51   ,Interrupt ID51   Priority/Priority Byte Offset 51  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID50   ,Interrupt ID50    Priority/Priority Byte Offset 50  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID49   ,Interrupt ID49   Priority/Priority Byte Offset 49  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID48   ,Interrupt ID48    Priority/Priority Byte Offset 48  "
group.long 0x434++0x03
line.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13"
hexmask.long.byte 0x00 24.--31. 1. " INTID55   ,Interrupt ID55   Priority/Priority Byte Offset 55  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID54   ,Interrupt ID54    Priority/Priority Byte Offset 54  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID53   ,Interrupt ID53   Priority/Priority Byte Offset 53  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID52   ,Interrupt ID52    Priority/Priority Byte Offset 52  "
group.long 0x438++0x03
line.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14"
hexmask.long.byte 0x00 24.--31. 1. " INTID59   ,Interrupt ID59   Priority/Priority Byte Offset 59  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID58   ,Interrupt ID58    Priority/Priority Byte Offset 58  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID57   ,Interrupt ID57   Priority/Priority Byte Offset 57  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID56   ,Interrupt ID56    Priority/Priority Byte Offset 56  "
group.long 0x43C++0x03
line.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15"
hexmask.long.byte 0x00 24.--31. 1. " INTID63   ,Interrupt ID63   Priority/Priority Byte Offset 63  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID62   ,Interrupt ID62    Priority/Priority Byte Offset 62  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID61   ,Interrupt ID61   Priority/Priority Byte Offset 61  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID60   ,Interrupt ID60    Priority/Priority Byte Offset 60  "
else
rgroup.long 0x420++0x03
line.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8"
rgroup.long 0x424++0x03
line.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9"
rgroup.long 0x428++0x03
line.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10"
rgroup.long 0x42C++0x03
line.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11"
rgroup.long 0x430++0x03
line.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12"
rgroup.long 0x434++0x03
line.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13"
rgroup.long 0x438++0x03
line.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14"
rgroup.long 0x43C++0x03
line.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)
group.long 0x440++0x03
line.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16"
hexmask.long.byte 0x00 24.--31. 1. " INTID67   ,Interrupt ID67   Priority/Priority Byte Offset 67  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID66   ,Interrupt ID66    Priority/Priority Byte Offset 66  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID65   ,Interrupt ID65   Priority/Priority Byte Offset 65  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID64   ,Interrupt ID64    Priority/Priority Byte Offset 64  "
group.long 0x444++0x03
line.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17"
hexmask.long.byte 0x00 24.--31. 1. " INTID71   ,Interrupt ID71   Priority/Priority Byte Offset 71  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID70   ,Interrupt ID70    Priority/Priority Byte Offset 70  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID69   ,Interrupt ID69   Priority/Priority Byte Offset 69  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID68   ,Interrupt ID68    Priority/Priority Byte Offset 68  "
group.long 0x448++0x03
line.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18"
hexmask.long.byte 0x00 24.--31. 1. " INTID75   ,Interrupt ID75   Priority/Priority Byte Offset 75  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID74   ,Interrupt ID74    Priority/Priority Byte Offset 74  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID73   ,Interrupt ID73   Priority/Priority Byte Offset 73  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID72   ,Interrupt ID72    Priority/Priority Byte Offset 72  "
group.long 0x44C++0x03
line.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19"
hexmask.long.byte 0x00 24.--31. 1. " INTID79   ,Interrupt ID79   Priority/Priority Byte Offset 79  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID78   ,Interrupt ID78    Priority/Priority Byte Offset 78  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID77   ,Interrupt ID77   Priority/Priority Byte Offset 77  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID76   ,Interrupt ID76    Priority/Priority Byte Offset 76  "
group.long 0x450++0x03
line.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20"
hexmask.long.byte 0x00 24.--31. 1. " INTID83   ,Interrupt ID83   Priority/Priority Byte Offset 83  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID82   ,Interrupt ID82    Priority/Priority Byte Offset 82  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID81   ,Interrupt ID81   Priority/Priority Byte Offset 81  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID80   ,Interrupt ID80    Priority/Priority Byte Offset 80  "
group.long 0x454++0x03
line.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21"
hexmask.long.byte 0x00 24.--31. 1. " INTID87   ,Interrupt ID87   Priority/Priority Byte Offset 87  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID86   ,Interrupt ID86    Priority/Priority Byte Offset 86  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID85   ,Interrupt ID85   Priority/Priority Byte Offset 85  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID84   ,Interrupt ID84    Priority/Priority Byte Offset 84  "
group.long 0x458++0x03
line.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22"
hexmask.long.byte 0x00 24.--31. 1. " INTID91   ,Interrupt ID91   Priority/Priority Byte Offset 91  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID90   ,Interrupt ID90    Priority/Priority Byte Offset 90  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID89   ,Interrupt ID89   Priority/Priority Byte Offset 89  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID88   ,Interrupt ID88    Priority/Priority Byte Offset 88  "
group.long 0x45C++0x03
line.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23"
hexmask.long.byte 0x00 24.--31. 1. " INTID95   ,Interrupt ID95   Priority/Priority Byte Offset 95  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID94   ,Interrupt ID94    Priority/Priority Byte Offset 94  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID93   ,Interrupt ID93   Priority/Priority Byte Offset 93  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID92   ,Interrupt ID92    Priority/Priority Byte Offset 92  "
else
rgroup.long 0x440++0x03
line.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16"
rgroup.long 0x444++0x03
line.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17"
rgroup.long 0x448++0x03
line.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18"
rgroup.long 0x44C++0x03
line.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19"
rgroup.long 0x450++0x03
line.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20"
rgroup.long 0x454++0x03
line.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21"
rgroup.long 0x458++0x03
line.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22"
rgroup.long 0x45C++0x03
line.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)
group.long 0x460++0x03
line.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24"
hexmask.long.byte 0x00 24.--31. 1. " INTID99   ,Interrupt ID99   Priority/Priority Byte Offset 99  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID98   ,Interrupt ID98    Priority/Priority Byte Offset 98  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID97   ,Interrupt ID97   Priority/Priority Byte Offset 97  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID96   ,Interrupt ID96    Priority/Priority Byte Offset 96  "
group.long 0x464++0x03
line.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25"
hexmask.long.byte 0x00 24.--31. 1. " INTID103  ,Interrupt ID103  Priority/Priority Byte Offset 103 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID102  ,Interrupt ID102   Priority/Priority Byte Offset 102 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID101  ,Interrupt ID101  Priority/Priority Byte Offset 101 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID100  ,Interrupt ID100   Priority/Priority Byte Offset 100 "
group.long 0x468++0x03
line.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26"
hexmask.long.byte 0x00 24.--31. 1. " INTID107  ,Interrupt ID107  Priority/Priority Byte Offset 107 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID106  ,Interrupt ID106   Priority/Priority Byte Offset 106 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID105  ,Interrupt ID105  Priority/Priority Byte Offset 105 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID104  ,Interrupt ID104   Priority/Priority Byte Offset 104 "
group.long 0x46C++0x03
line.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27"
hexmask.long.byte 0x00 24.--31. 1. " INTID111  ,Interrupt ID111  Priority/Priority Byte Offset 111 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID110  ,Interrupt ID110   Priority/Priority Byte Offset 110 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID109  ,Interrupt ID109  Priority/Priority Byte Offset 109 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID108  ,Interrupt ID108   Priority/Priority Byte Offset 108 "
group.long 0x470++0x03
line.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28"
hexmask.long.byte 0x00 24.--31. 1. " INTID115  ,Interrupt ID115  Priority/Priority Byte Offset 115 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID114  ,Interrupt ID114   Priority/Priority Byte Offset 114 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID113  ,Interrupt ID113  Priority/Priority Byte Offset 113 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID112  ,Interrupt ID112   Priority/Priority Byte Offset 112 "
group.long 0x474++0x03
line.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29"
hexmask.long.byte 0x00 24.--31. 1. " INTID119  ,Interrupt ID119  Priority/Priority Byte Offset 119 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID118  ,Interrupt ID118   Priority/Priority Byte Offset 118 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID117  ,Interrupt ID117  Priority/Priority Byte Offset 117 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID116  ,Interrupt ID116   Priority/Priority Byte Offset 116 "
group.long 0x478++0x03
line.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30"
hexmask.long.byte 0x00 24.--31. 1. " INTID123  ,Interrupt ID123  Priority/Priority Byte Offset 123 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID122  ,Interrupt ID122   Priority/Priority Byte Offset 122 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID121  ,Interrupt ID121  Priority/Priority Byte Offset 121 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID120  ,Interrupt ID120   Priority/Priority Byte Offset 120 "
group.long 0x47C++0x03
line.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31"
hexmask.long.byte 0x00 24.--31. 1. " INTID127  ,Interrupt ID127  Priority/Priority Byte Offset 127 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID126  ,Interrupt ID126   Priority/Priority Byte Offset 126 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID125  ,Interrupt ID125  Priority/Priority Byte Offset 125 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID124  ,Interrupt ID124   Priority/Priority Byte Offset 124 "
else
rgroup.long 0x460++0x03
line.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24"
rgroup.long 0x464++0x03
line.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25"
rgroup.long 0x468++0x03
line.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26"
rgroup.long 0x46C++0x03
line.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27"
rgroup.long 0x470++0x03
line.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28"
rgroup.long 0x474++0x03
line.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29"
rgroup.long 0x478++0x03
line.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30"
rgroup.long 0x47C++0x03
line.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)
group.long 0x480++0x03
line.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32"
hexmask.long.byte 0x00 24.--31. 1. " INTID131  ,Interrupt ID131  Priority/Priority Byte Offset 131 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID130  ,Interrupt ID130   Priority/Priority Byte Offset 130 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID129  ,Interrupt ID129  Priority/Priority Byte Offset 129 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID128  ,Interrupt ID128   Priority/Priority Byte Offset 128 "
group.long 0x484++0x03
line.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33"
hexmask.long.byte 0x00 24.--31. 1. " INTID135  ,Interrupt ID135  Priority/Priority Byte Offset 135 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID134  ,Interrupt ID134   Priority/Priority Byte Offset 134 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID133  ,Interrupt ID133  Priority/Priority Byte Offset 133 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID132  ,Interrupt ID132   Priority/Priority Byte Offset 132 "
group.long 0x488++0x03
line.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34"
hexmask.long.byte 0x00 24.--31. 1. " INTID139  ,Interrupt ID139  Priority/Priority Byte Offset 139 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID138  ,Interrupt ID138   Priority/Priority Byte Offset 138 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID137  ,Interrupt ID137  Priority/Priority Byte Offset 137 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID136  ,Interrupt ID136   Priority/Priority Byte Offset 136 "
group.long 0x48C++0x03
line.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35"
hexmask.long.byte 0x00 24.--31. 1. " INTID143  ,Interrupt ID143  Priority/Priority Byte Offset 143 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID142  ,Interrupt ID142   Priority/Priority Byte Offset 142 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID141  ,Interrupt ID141  Priority/Priority Byte Offset 141 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID140  ,Interrupt ID140   Priority/Priority Byte Offset 140 "
group.long 0x490++0x03
line.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36"
hexmask.long.byte 0x00 24.--31. 1. " INTID147  ,Interrupt ID147  Priority/Priority Byte Offset 147 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID146  ,Interrupt ID146   Priority/Priority Byte Offset 146 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID145  ,Interrupt ID145  Priority/Priority Byte Offset 145 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID144  ,Interrupt ID144   Priority/Priority Byte Offset 144 "
group.long 0x494++0x03
line.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37"
hexmask.long.byte 0x00 24.--31. 1. " INTID151  ,Interrupt ID151  Priority/Priority Byte Offset 151 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID150  ,Interrupt ID150   Priority/Priority Byte Offset 150 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID149  ,Interrupt ID149  Priority/Priority Byte Offset 149 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID148  ,Interrupt ID148   Priority/Priority Byte Offset 148 "
group.long 0x498++0x03
line.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38"
hexmask.long.byte 0x00 24.--31. 1. " INTID155  ,Interrupt ID155  Priority/Priority Byte Offset 155 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID154  ,Interrupt ID154   Priority/Priority Byte Offset 154 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID153  ,Interrupt ID153  Priority/Priority Byte Offset 153 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID152  ,Interrupt ID152   Priority/Priority Byte Offset 152 "
group.long 0x49C++0x03
line.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39"
hexmask.long.byte 0x00 24.--31. 1. " INTID159  ,Interrupt ID159  Priority/Priority Byte Offset 159 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID158  ,Interrupt ID158   Priority/Priority Byte Offset 158 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID157  ,Interrupt ID157  Priority/Priority Byte Offset 157 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID156  ,Interrupt ID156   Priority/Priority Byte Offset 156 "
else
rgroup.long 0x480++0x03
line.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32"
rgroup.long 0x484++0x03
line.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33"
rgroup.long 0x488++0x03
line.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34"
rgroup.long 0x48C++0x03
line.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35"
rgroup.long 0x490++0x03
line.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36"
rgroup.long 0x494++0x03
line.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37"
rgroup.long 0x498++0x03
line.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38"
rgroup.long 0x49C++0x03
line.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)
group.long 0x4A0++0x03
line.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40"
hexmask.long.byte 0x00 24.--31. 1. " INTID163  ,Interrupt ID163  Priority/Priority Byte Offset 163 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID162  ,Interrupt ID162   Priority/Priority Byte Offset 162 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID161  ,Interrupt ID161  Priority/Priority Byte Offset 161 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID160  ,Interrupt ID160   Priority/Priority Byte Offset 160 "
group.long 0x4A4++0x03
line.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41"
hexmask.long.byte 0x00 24.--31. 1. " INTID167  ,Interrupt ID167  Priority/Priority Byte Offset 167 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID166  ,Interrupt ID166   Priority/Priority Byte Offset 166 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID165  ,Interrupt ID165  Priority/Priority Byte Offset 165 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID164  ,Interrupt ID164   Priority/Priority Byte Offset 164 "
group.long 0x4A8++0x03
line.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42"
hexmask.long.byte 0x00 24.--31. 1. " INTID171  ,Interrupt ID171  Priority/Priority Byte Offset 171 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID170  ,Interrupt ID170   Priority/Priority Byte Offset 170 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID169  ,Interrupt ID169  Priority/Priority Byte Offset 169 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID168  ,Interrupt ID168   Priority/Priority Byte Offset 168 "
group.long 0x4AC++0x03
line.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43"
hexmask.long.byte 0x00 24.--31. 1. " INTID175  ,Interrupt ID175  Priority/Priority Byte Offset 175 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID174  ,Interrupt ID174   Priority/Priority Byte Offset 174 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID173  ,Interrupt ID173  Priority/Priority Byte Offset 173 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID172  ,Interrupt ID172   Priority/Priority Byte Offset 172 "
group.long 0x4B0++0x03
line.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44"
hexmask.long.byte 0x00 24.--31. 1. " INTID179  ,Interrupt ID179  Priority/Priority Byte Offset 179 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID178  ,Interrupt ID178   Priority/Priority Byte Offset 178 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID177  ,Interrupt ID177  Priority/Priority Byte Offset 177 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID176  ,Interrupt ID176   Priority/Priority Byte Offset 176 "
group.long 0x4B4++0x03
line.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45"
hexmask.long.byte 0x00 24.--31. 1. " INTID183  ,Interrupt ID183  Priority/Priority Byte Offset 183 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID182  ,Interrupt ID182   Priority/Priority Byte Offset 182 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID181  ,Interrupt ID181  Priority/Priority Byte Offset 181 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID180  ,Interrupt ID180   Priority/Priority Byte Offset 180 "
group.long 0x4B8++0x03
line.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46"
hexmask.long.byte 0x00 24.--31. 1. " INTID187  ,Interrupt ID187  Priority/Priority Byte Offset 187 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID186  ,Interrupt ID186   Priority/Priority Byte Offset 186 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID185  ,Interrupt ID185  Priority/Priority Byte Offset 185 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID184  ,Interrupt ID184   Priority/Priority Byte Offset 184 "
group.long 0x4BC++0x03
line.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47"
hexmask.long.byte 0x00 24.--31. 1. " INTID191  ,Interrupt ID191  Priority/Priority Byte Offset 191 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID190  ,Interrupt ID190   Priority/Priority Byte Offset 190 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID189  ,Interrupt ID189  Priority/Priority Byte Offset 189 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID188  ,Interrupt ID188   Priority/Priority Byte Offset 188 "
else
rgroup.long 0x4A0++0x03
line.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40"
rgroup.long 0x4A4++0x03
line.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41"
rgroup.long 0x4A8++0x03
line.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42"
rgroup.long 0x4AC++0x03
line.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43"
rgroup.long 0x4B0++0x03
line.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44"
rgroup.long 0x4B4++0x03
line.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45"
rgroup.long 0x4B8++0x03
line.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46"
rgroup.long 0x4BC++0x03
line.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)
group.long 0x4C0++0x03
line.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48"
hexmask.long.byte 0x00 24.--31. 1. " INTID195  ,Interrupt ID195  Priority/Priority Byte Offset 195 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID194  ,Interrupt ID194   Priority/Priority Byte Offset 194 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID193  ,Interrupt ID193  Priority/Priority Byte Offset 193 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID192  ,Interrupt ID192   Priority/Priority Byte Offset 192 "
group.long 0x4C4++0x03
line.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49"
hexmask.long.byte 0x00 24.--31. 1. " INTID199  ,Interrupt ID199  Priority/Priority Byte Offset 199 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID198  ,Interrupt ID198   Priority/Priority Byte Offset 198 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID197  ,Interrupt ID197  Priority/Priority Byte Offset 197 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID196  ,Interrupt ID196   Priority/Priority Byte Offset 196 "
group.long 0x4C8++0x03
line.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50"
hexmask.long.byte 0x00 24.--31. 1. " INTID203  ,Interrupt ID203  Priority/Priority Byte Offset 203 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID202  ,Interrupt ID202   Priority/Priority Byte Offset 202 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID201  ,Interrupt ID201  Priority/Priority Byte Offset 201 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID200  ,Interrupt ID200   Priority/Priority Byte Offset 200 "
group.long 0x4CC++0x03
line.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51"
hexmask.long.byte 0x00 24.--31. 1. " INTID207  ,Interrupt ID207  Priority/Priority Byte Offset 207 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID206  ,Interrupt ID206   Priority/Priority Byte Offset 206 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID205  ,Interrupt ID205  Priority/Priority Byte Offset 205 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID204  ,Interrupt ID204   Priority/Priority Byte Offset 204 "
group.long 0x4D0++0x03
line.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52"
hexmask.long.byte 0x00 24.--31. 1. " INTID211  ,Interrupt ID211  Priority/Priority Byte Offset 211 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID210  ,Interrupt ID210   Priority/Priority Byte Offset 210 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID209  ,Interrupt ID209  Priority/Priority Byte Offset 209 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID208  ,Interrupt ID208   Priority/Priority Byte Offset 208 "
group.long 0x4D4++0x03
line.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53"
hexmask.long.byte 0x00 24.--31. 1. " INTID215  ,Interrupt ID215  Priority/Priority Byte Offset 215 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID214  ,Interrupt ID214   Priority/Priority Byte Offset 214 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID213  ,Interrupt ID213  Priority/Priority Byte Offset 213 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID212  ,Interrupt ID212   Priority/Priority Byte Offset 212 "
group.long 0x4D8++0x03
line.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54"
hexmask.long.byte 0x00 24.--31. 1. " INTID219  ,Interrupt ID219  Priority/Priority Byte Offset 219 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID218  ,Interrupt ID218   Priority/Priority Byte Offset 218 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID217  ,Interrupt ID217  Priority/Priority Byte Offset 217 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID216  ,Interrupt ID216   Priority/Priority Byte Offset 216 "
group.long 0x4DC++0x03
line.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55"
hexmask.long.byte 0x00 24.--31. 1. " INTID223  ,Interrupt ID223  Priority/Priority Byte Offset 223 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID222  ,Interrupt ID222   Priority/Priority Byte Offset 222 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID221  ,Interrupt ID221  Priority/Priority Byte Offset 221 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID220  ,Interrupt ID220   Priority/Priority Byte Offset 220 "
else
rgroup.long 0x4C0++0x03
line.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48"
rgroup.long 0x4C4++0x03
line.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49"
rgroup.long 0x4C8++0x03
line.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50"
rgroup.long 0x4CC++0x03
line.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51"
rgroup.long 0x4D0++0x03
line.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52"
rgroup.long 0x4D4++0x03
line.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53"
rgroup.long 0x4D8++0x03
line.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54"
rgroup.long 0x4DC++0x03
line.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)
group.long 0x4E0++0x03
line.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56"
hexmask.long.byte 0x00 24.--31. 1. " INTID227  ,Interrupt ID227  Priority/Priority Byte Offset 227 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID226  ,Interrupt ID226   Priority/Priority Byte Offset 226 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID225  ,Interrupt ID225  Priority/Priority Byte Offset 225 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID224  ,Interrupt ID224   Priority/Priority Byte Offset 224 "
group.long 0x4E4++0x03
line.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57"
hexmask.long.byte 0x00 24.--31. 1. " INTID231  ,Interrupt ID231  Priority/Priority Byte Offset 231 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID230  ,Interrupt ID230   Priority/Priority Byte Offset 230 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID229  ,Interrupt ID229  Priority/Priority Byte Offset 229 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID228  ,Interrupt ID228   Priority/Priority Byte Offset 228 "
group.long 0x4E8++0x03
line.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58"
hexmask.long.byte 0x00 24.--31. 1. " INTID235  ,Interrupt ID235  Priority/Priority Byte Offset 235 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID234  ,Interrupt ID234   Priority/Priority Byte Offset 234 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID233  ,Interrupt ID233  Priority/Priority Byte Offset 233 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID232  ,Interrupt ID232   Priority/Priority Byte Offset 232 "
group.long 0x4EC++0x03
line.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59"
hexmask.long.byte 0x00 24.--31. 1. " INTID239  ,Interrupt ID239  Priority/Priority Byte Offset 239 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID238  ,Interrupt ID238   Priority/Priority Byte Offset 238 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID237  ,Interrupt ID237  Priority/Priority Byte Offset 237 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID236  ,Interrupt ID236   Priority/Priority Byte Offset 236 "
group.long 0x4F0++0x03
line.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60"
hexmask.long.byte 0x00 24.--31. 1. " INTID243  ,Interrupt ID243  Priority/Priority Byte Offset 243 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID242  ,Interrupt ID242   Priority/Priority Byte Offset 242 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID241  ,Interrupt ID241  Priority/Priority Byte Offset 241 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID240  ,Interrupt ID240   Priority/Priority Byte Offset 240 "
group.long 0x4F4++0x03
line.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61"
hexmask.long.byte 0x00 24.--31. 1. " INTID247  ,Interrupt ID247  Priority/Priority Byte Offset 247 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID246  ,Interrupt ID246   Priority/Priority Byte Offset 246 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID245  ,Interrupt ID245  Priority/Priority Byte Offset 245 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID244  ,Interrupt ID244   Priority/Priority Byte Offset 244 "
group.long 0x4F8++0x03
line.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62"
hexmask.long.byte 0x00 24.--31. 1. " INTID251  ,Interrupt ID251  Priority/Priority Byte Offset 251 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID250  ,Interrupt ID250   Priority/Priority Byte Offset 250 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID249  ,Interrupt ID249  Priority/Priority Byte Offset 249 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID248  ,Interrupt ID248   Priority/Priority Byte Offset 248 "
group.long 0x4FC++0x03
line.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63"
hexmask.long.byte 0x00 24.--31. 1. " INTID255  ,Interrupt ID255  Priority/Priority Byte Offset 255 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID254  ,Interrupt ID254   Priority/Priority Byte Offset 254 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID253  ,Interrupt ID253  Priority/Priority Byte Offset 253 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID252  ,Interrupt ID252   Priority/Priority Byte Offset 252 "
else
rgroup.long 0x4E0++0x03
line.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56"
rgroup.long 0x4E4++0x03
line.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57"
rgroup.long 0x4E8++0x03
line.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58"
rgroup.long 0x4EC++0x03
line.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59"
rgroup.long 0x4F0++0x03
line.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60"
rgroup.long 0x4F4++0x03
line.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61"
rgroup.long 0x4F8++0x03
line.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62"
rgroup.long 0x4FC++0x03
line.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)
group.long 0x500++0x03
line.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64"
hexmask.long.byte 0x00 24.--31. 1. " INTID259  ,Interrupt ID259  Priority/Priority Byte Offset 259 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID258  ,Interrupt ID258   Priority/Priority Byte Offset 258 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID257  ,Interrupt ID257  Priority/Priority Byte Offset 257 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID256  ,Interrupt ID256   Priority/Priority Byte Offset 256 "
group.long 0x504++0x03
line.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65"
hexmask.long.byte 0x00 24.--31. 1. " INTID263  ,Interrupt ID263  Priority/Priority Byte Offset 263 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID262  ,Interrupt ID262   Priority/Priority Byte Offset 262 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID261  ,Interrupt ID261  Priority/Priority Byte Offset 261 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID260  ,Interrupt ID260   Priority/Priority Byte Offset 260 "
group.long 0x508++0x03
line.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66"
hexmask.long.byte 0x00 24.--31. 1. " INTID267  ,Interrupt ID267  Priority/Priority Byte Offset 267 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID266  ,Interrupt ID266   Priority/Priority Byte Offset 266 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID265  ,Interrupt ID265  Priority/Priority Byte Offset 265 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID264  ,Interrupt ID264   Priority/Priority Byte Offset 264 "
group.long 0x50C++0x03
line.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67"
hexmask.long.byte 0x00 24.--31. 1. " INTID271  ,Interrupt ID271  Priority/Priority Byte Offset 271 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID270  ,Interrupt ID270   Priority/Priority Byte Offset 270 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID269  ,Interrupt ID269  Priority/Priority Byte Offset 269 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID268  ,Interrupt ID268   Priority/Priority Byte Offset 268 "
group.long 0x510++0x03
line.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68"
hexmask.long.byte 0x00 24.--31. 1. " INTID275  ,Interrupt ID275  Priority/Priority Byte Offset 275 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID274  ,Interrupt ID274   Priority/Priority Byte Offset 274 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID273  ,Interrupt ID273  Priority/Priority Byte Offset 273 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID272  ,Interrupt ID272   Priority/Priority Byte Offset 272 "
group.long 0x514++0x03
line.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69"
hexmask.long.byte 0x00 24.--31. 1. " INTID279  ,Interrupt ID279  Priority/Priority Byte Offset 279 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID278  ,Interrupt ID278   Priority/Priority Byte Offset 278 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID277  ,Interrupt ID277  Priority/Priority Byte Offset 277 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID276  ,Interrupt ID276   Priority/Priority Byte Offset 276 "
group.long 0x518++0x03
line.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70"
hexmask.long.byte 0x00 24.--31. 1. " INTID283  ,Interrupt ID283  Priority/Priority Byte Offset 283 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID282  ,Interrupt ID282   Priority/Priority Byte Offset 282 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID281  ,Interrupt ID281  Priority/Priority Byte Offset 281 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID280  ,Interrupt ID280   Priority/Priority Byte Offset 280 "
group.long 0x51C++0x03
line.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71"
hexmask.long.byte 0x00 24.--31. 1. " INTID287  ,Interrupt ID287  Priority/Priority Byte Offset 287 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID286  ,Interrupt ID286   Priority/Priority Byte Offset 286 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID285  ,Interrupt ID285  Priority/Priority Byte Offset 285 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID284  ,Interrupt ID284   Priority/Priority Byte Offset 284 "
else
rgroup.long 0x500++0x03
line.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64"
rgroup.long 0x504++0x03
line.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65"
rgroup.long 0x508++0x03
line.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66"
rgroup.long 0x50C++0x03
line.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67"
rgroup.long 0x510++0x03
line.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68"
rgroup.long 0x514++0x03
line.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69"
rgroup.long 0x518++0x03
line.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70"
rgroup.long 0x51C++0x03
line.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)
group.long 0x520++0x03
line.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72"
hexmask.long.byte 0x00 24.--31. 1. " INTID291  ,Interrupt ID291  Priority/Priority Byte Offset 291 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID290  ,Interrupt ID290   Priority/Priority Byte Offset 290 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID289  ,Interrupt ID289  Priority/Priority Byte Offset 289 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID288  ,Interrupt ID288   Priority/Priority Byte Offset 288 "
group.long 0x524++0x03
line.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73"
hexmask.long.byte 0x00 24.--31. 1. " INTID295  ,Interrupt ID295  Priority/Priority Byte Offset 295 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID294  ,Interrupt ID294   Priority/Priority Byte Offset 294 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID293  ,Interrupt ID293  Priority/Priority Byte Offset 293 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID292  ,Interrupt ID292   Priority/Priority Byte Offset 292 "
group.long 0x528++0x03
line.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74"
hexmask.long.byte 0x00 24.--31. 1. " INTID299  ,Interrupt ID299  Priority/Priority Byte Offset 299 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID298  ,Interrupt ID298   Priority/Priority Byte Offset 298 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID297  ,Interrupt ID297  Priority/Priority Byte Offset 297 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID296  ,Interrupt ID296   Priority/Priority Byte Offset 296 "
group.long 0x52C++0x03
line.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75"
hexmask.long.byte 0x00 24.--31. 1. " INTID303  ,Interrupt ID303  Priority/Priority Byte Offset 303 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID302  ,Interrupt ID302   Priority/Priority Byte Offset 302 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID301  ,Interrupt ID301  Priority/Priority Byte Offset 301 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID300  ,Interrupt ID300   Priority/Priority Byte Offset 300 "
group.long 0x530++0x03
line.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76"
hexmask.long.byte 0x00 24.--31. 1. " INTID307  ,Interrupt ID307  Priority/Priority Byte Offset 307 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID306  ,Interrupt ID306   Priority/Priority Byte Offset 306 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID305  ,Interrupt ID305  Priority/Priority Byte Offset 305 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID304  ,Interrupt ID304   Priority/Priority Byte Offset 304 "
group.long 0x534++0x03
line.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77"
hexmask.long.byte 0x00 24.--31. 1. " INTID311  ,Interrupt ID311  Priority/Priority Byte Offset 311 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID310  ,Interrupt ID310   Priority/Priority Byte Offset 310 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID309  ,Interrupt ID309  Priority/Priority Byte Offset 309 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID308  ,Interrupt ID308   Priority/Priority Byte Offset 308 "
group.long 0x538++0x03
line.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78"
hexmask.long.byte 0x00 24.--31. 1. " INTID315  ,Interrupt ID315  Priority/Priority Byte Offset 315 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID314  ,Interrupt ID314   Priority/Priority Byte Offset 314 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID313  ,Interrupt ID313  Priority/Priority Byte Offset 313 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID312  ,Interrupt ID312   Priority/Priority Byte Offset 312 "
group.long 0x53C++0x03
line.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79"
hexmask.long.byte 0x00 24.--31. 1. " INTID319  ,Interrupt ID319  Priority/Priority Byte Offset 319 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID318  ,Interrupt ID318   Priority/Priority Byte Offset 318 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID317  ,Interrupt ID317  Priority/Priority Byte Offset 317 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID316  ,Interrupt ID316   Priority/Priority Byte Offset 316 "
else
rgroup.long 0x520++0x03
line.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72"
rgroup.long 0x524++0x03
line.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73"
rgroup.long 0x528++0x03
line.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74"
rgroup.long 0x52C++0x03
line.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75"
rgroup.long 0x530++0x03
line.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76"
rgroup.long 0x534++0x03
line.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77"
rgroup.long 0x538++0x03
line.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78"
rgroup.long 0x53C++0x03
line.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)
group.long 0x540++0x03
line.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80"
hexmask.long.byte 0x00 24.--31. 1. " INTID323  ,Interrupt ID323  Priority/Priority Byte Offset 323 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID322  ,Interrupt ID322   Priority/Priority Byte Offset 322 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID321  ,Interrupt ID321  Priority/Priority Byte Offset 321 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID320  ,Interrupt ID320   Priority/Priority Byte Offset 320 "
group.long 0x544++0x03
line.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81"
hexmask.long.byte 0x00 24.--31. 1. " INTID327  ,Interrupt ID327  Priority/Priority Byte Offset 327 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID326  ,Interrupt ID326   Priority/Priority Byte Offset 326 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID325  ,Interrupt ID325  Priority/Priority Byte Offset 325 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID324  ,Interrupt ID324   Priority/Priority Byte Offset 324 "
group.long 0x548++0x03
line.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82"
hexmask.long.byte 0x00 24.--31. 1. " INTID331  ,Interrupt ID331  Priority/Priority Byte Offset 331 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID330  ,Interrupt ID330   Priority/Priority Byte Offset 330 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID329  ,Interrupt ID329  Priority/Priority Byte Offset 329 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID328  ,Interrupt ID328   Priority/Priority Byte Offset 328 "
group.long 0x54C++0x03
line.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83"
hexmask.long.byte 0x00 24.--31. 1. " INTID335  ,Interrupt ID335  Priority/Priority Byte Offset 335 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID334  ,Interrupt ID334   Priority/Priority Byte Offset 334 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID333  ,Interrupt ID333  Priority/Priority Byte Offset 333 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID332  ,Interrupt ID332   Priority/Priority Byte Offset 332 "
group.long 0x550++0x03
line.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84"
hexmask.long.byte 0x00 24.--31. 1. " INTID339  ,Interrupt ID339  Priority/Priority Byte Offset 339 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID338  ,Interrupt ID338   Priority/Priority Byte Offset 338 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID337  ,Interrupt ID337  Priority/Priority Byte Offset 337 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID336  ,Interrupt ID336   Priority/Priority Byte Offset 336 "
group.long 0x554++0x03
line.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85"
hexmask.long.byte 0x00 24.--31. 1. " INTID343  ,Interrupt ID343  Priority/Priority Byte Offset 343 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID342  ,Interrupt ID342   Priority/Priority Byte Offset 342 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID341  ,Interrupt ID341  Priority/Priority Byte Offset 341 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID340  ,Interrupt ID340   Priority/Priority Byte Offset 340 "
group.long 0x558++0x03
line.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86"
hexmask.long.byte 0x00 24.--31. 1. " INTID347  ,Interrupt ID347  Priority/Priority Byte Offset 347 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID346  ,Interrupt ID346   Priority/Priority Byte Offset 346 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID345  ,Interrupt ID345  Priority/Priority Byte Offset 345 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID344  ,Interrupt ID344   Priority/Priority Byte Offset 344 "
group.long 0x55C++0x03
line.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87"
hexmask.long.byte 0x00 24.--31. 1. " INTID351  ,Interrupt ID351  Priority/Priority Byte Offset 351 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID350  ,Interrupt ID350   Priority/Priority Byte Offset 350 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID349  ,Interrupt ID349  Priority/Priority Byte Offset 349 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID348  ,Interrupt ID348   Priority/Priority Byte Offset 348 "
else
rgroup.long 0x540++0x03
line.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80"
rgroup.long 0x544++0x03
line.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81"
rgroup.long 0x548++0x03
line.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82"
rgroup.long 0x54C++0x03
line.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83"
rgroup.long 0x550++0x03
line.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84"
rgroup.long 0x554++0x03
line.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85"
rgroup.long 0x558++0x03
line.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86"
rgroup.long 0x55C++0x03
line.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)
group.long 0x560++0x03
line.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88"
hexmask.long.byte 0x00 24.--31. 1. " INTID355  ,Interrupt ID355  Priority/Priority Byte Offset 355 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID354  ,Interrupt ID354   Priority/Priority Byte Offset 354 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID353  ,Interrupt ID353  Priority/Priority Byte Offset 353 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID352  ,Interrupt ID352   Priority/Priority Byte Offset 352 "
group.long 0x564++0x03
line.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89"
hexmask.long.byte 0x00 24.--31. 1. " INTID359  ,Interrupt ID359  Priority/Priority Byte Offset 359 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID358  ,Interrupt ID358   Priority/Priority Byte Offset 358 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID357  ,Interrupt ID357  Priority/Priority Byte Offset 357 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID356  ,Interrupt ID356   Priority/Priority Byte Offset 356 "
group.long 0x568++0x03
line.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90"
hexmask.long.byte 0x00 24.--31. 1. " INTID363  ,Interrupt ID363  Priority/Priority Byte Offset 363 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID362  ,Interrupt ID362   Priority/Priority Byte Offset 362 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID361  ,Interrupt ID361  Priority/Priority Byte Offset 361 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID360  ,Interrupt ID360   Priority/Priority Byte Offset 360 "
group.long 0x56C++0x03
line.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91"
hexmask.long.byte 0x00 24.--31. 1. " INTID367  ,Interrupt ID367  Priority/Priority Byte Offset 367 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID366  ,Interrupt ID366   Priority/Priority Byte Offset 366 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID365  ,Interrupt ID365  Priority/Priority Byte Offset 365 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID364  ,Interrupt ID364   Priority/Priority Byte Offset 364 "
group.long 0x570++0x03
line.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92"
hexmask.long.byte 0x00 24.--31. 1. " INTID371  ,Interrupt ID371  Priority/Priority Byte Offset 371 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID370  ,Interrupt ID370   Priority/Priority Byte Offset 370 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID369  ,Interrupt ID369  Priority/Priority Byte Offset 369 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID368  ,Interrupt ID368   Priority/Priority Byte Offset 368 "
group.long 0x574++0x03
line.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93"
hexmask.long.byte 0x00 24.--31. 1. " INTID375  ,Interrupt ID375  Priority/Priority Byte Offset 375 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID374  ,Interrupt ID374   Priority/Priority Byte Offset 374 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID373  ,Interrupt ID373  Priority/Priority Byte Offset 373 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID372  ,Interrupt ID372   Priority/Priority Byte Offset 372 "
group.long 0x578++0x03
line.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94"
hexmask.long.byte 0x00 24.--31. 1. " INTID379  ,Interrupt ID379  Priority/Priority Byte Offset 379 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID378  ,Interrupt ID378   Priority/Priority Byte Offset 378 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID377  ,Interrupt ID377  Priority/Priority Byte Offset 377 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID376  ,Interrupt ID376   Priority/Priority Byte Offset 376 "
group.long 0x57C++0x03
line.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95"
hexmask.long.byte 0x00 24.--31. 1. " INTID383  ,Interrupt ID383  Priority/Priority Byte Offset 383 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID382  ,Interrupt ID382   Priority/Priority Byte Offset 382 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID381  ,Interrupt ID381  Priority/Priority Byte Offset 381 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID380  ,Interrupt ID380   Priority/Priority Byte Offset 380 "
else
rgroup.long 0x560++0x03
line.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88"
rgroup.long 0x564++0x03
line.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89"
rgroup.long 0x568++0x03
line.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90"
rgroup.long 0x56C++0x03
line.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91"
rgroup.long 0x570++0x03
line.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92"
rgroup.long 0x574++0x03
line.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93"
rgroup.long 0x578++0x03
line.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94"
rgroup.long 0x57C++0x03
line.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)
group.long 0x580++0x03
line.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96"
hexmask.long.byte 0x00 24.--31. 1. " INTID387  ,Interrupt ID387  Priority/Priority Byte Offset 387 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID386  ,Interrupt ID386   Priority/Priority Byte Offset 386 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID385  ,Interrupt ID385  Priority/Priority Byte Offset 385 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID384  ,Interrupt ID384   Priority/Priority Byte Offset 384 "
group.long 0x584++0x03
line.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97"
hexmask.long.byte 0x00 24.--31. 1. " INTID391  ,Interrupt ID391  Priority/Priority Byte Offset 391 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID390  ,Interrupt ID390   Priority/Priority Byte Offset 390 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID389  ,Interrupt ID389  Priority/Priority Byte Offset 389 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID388  ,Interrupt ID388   Priority/Priority Byte Offset 388 "
group.long 0x588++0x03
line.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98"
hexmask.long.byte 0x00 24.--31. 1. " INTID395  ,Interrupt ID395  Priority/Priority Byte Offset 395 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID394  ,Interrupt ID394   Priority/Priority Byte Offset 394 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID393  ,Interrupt ID393  Priority/Priority Byte Offset 393 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID392  ,Interrupt ID392   Priority/Priority Byte Offset 392 "
group.long 0x58C++0x03
line.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99"
hexmask.long.byte 0x00 24.--31. 1. " INTID399  ,Interrupt ID399  Priority/Priority Byte Offset 399 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID398  ,Interrupt ID398   Priority/Priority Byte Offset 398 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID397  ,Interrupt ID397  Priority/Priority Byte Offset 397 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID396  ,Interrupt ID396   Priority/Priority Byte Offset 396 "
group.long 0x590++0x03
line.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100"
hexmask.long.byte 0x00 24.--31. 1. " INTID403  ,Interrupt ID403  Priority/Priority Byte Offset 403 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID402  ,Interrupt ID402   Priority/Priority Byte Offset 402 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID401  ,Interrupt ID401  Priority/Priority Byte Offset 401 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID400  ,Interrupt ID400   Priority/Priority Byte Offset 400 "
group.long 0x594++0x03
line.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101"
hexmask.long.byte 0x00 24.--31. 1. " INTID407  ,Interrupt ID407  Priority/Priority Byte Offset 407 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID406  ,Interrupt ID406   Priority/Priority Byte Offset 406 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID405  ,Interrupt ID405  Priority/Priority Byte Offset 405 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID404  ,Interrupt ID404   Priority/Priority Byte Offset 404 "
group.long 0x598++0x03
line.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102"
hexmask.long.byte 0x00 24.--31. 1. " INTID411  ,Interrupt ID411  Priority/Priority Byte Offset 411 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID410  ,Interrupt ID410   Priority/Priority Byte Offset 410 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID409  ,Interrupt ID409  Priority/Priority Byte Offset 409 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID408  ,Interrupt ID408   Priority/Priority Byte Offset 408 "
group.long 0x59C++0x03
line.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103"
hexmask.long.byte 0x00 24.--31. 1. " INTID415  ,Interrupt ID415  Priority/Priority Byte Offset 415 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID414  ,Interrupt ID414   Priority/Priority Byte Offset 414 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID413  ,Interrupt ID413  Priority/Priority Byte Offset 413 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID412  ,Interrupt ID412   Priority/Priority Byte Offset 412 "
else
rgroup.long 0x580++0x03
line.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96"
rgroup.long 0x584++0x03
line.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97"
rgroup.long 0x588++0x03
line.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98"
rgroup.long 0x58C++0x03
line.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99"
rgroup.long 0x590++0x03
line.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100"
rgroup.long 0x594++0x03
line.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101"
rgroup.long 0x598++0x03
line.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102"
rgroup.long 0x59C++0x03
line.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)
group.long 0x5A0++0x03
line.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104"
hexmask.long.byte 0x00 24.--31. 1. " INTID419  ,Interrupt ID419  Priority/Priority Byte Offset 419 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID418  ,Interrupt ID418   Priority/Priority Byte Offset 418 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID417  ,Interrupt ID417  Priority/Priority Byte Offset 417 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID416  ,Interrupt ID416   Priority/Priority Byte Offset 416 "
group.long 0x5A4++0x03
line.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105"
hexmask.long.byte 0x00 24.--31. 1. " INTID423  ,Interrupt ID423  Priority/Priority Byte Offset 423 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID422  ,Interrupt ID422   Priority/Priority Byte Offset 422 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID421  ,Interrupt ID421  Priority/Priority Byte Offset 421 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID420  ,Interrupt ID420   Priority/Priority Byte Offset 420 "
group.long 0x5A8++0x03
line.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106"
hexmask.long.byte 0x00 24.--31. 1. " INTID427  ,Interrupt ID427  Priority/Priority Byte Offset 427 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID426  ,Interrupt ID426   Priority/Priority Byte Offset 426 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID425  ,Interrupt ID425  Priority/Priority Byte Offset 425 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID424  ,Interrupt ID424   Priority/Priority Byte Offset 424 "
group.long 0x5AC++0x03
line.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107"
hexmask.long.byte 0x00 24.--31. 1. " INTID431  ,Interrupt ID431  Priority/Priority Byte Offset 431 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID430  ,Interrupt ID430   Priority/Priority Byte Offset 430 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID429  ,Interrupt ID429  Priority/Priority Byte Offset 429 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID428  ,Interrupt ID428   Priority/Priority Byte Offset 428 "
group.long 0x5B0++0x03
line.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108"
hexmask.long.byte 0x00 24.--31. 1. " INTID435  ,Interrupt ID435  Priority/Priority Byte Offset 435 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID434  ,Interrupt ID434   Priority/Priority Byte Offset 434 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID433  ,Interrupt ID433  Priority/Priority Byte Offset 433 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID432  ,Interrupt ID432   Priority/Priority Byte Offset 432 "
group.long 0x5B4++0x03
line.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109"
hexmask.long.byte 0x00 24.--31. 1. " INTID439  ,Interrupt ID439  Priority/Priority Byte Offset 439 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID438  ,Interrupt ID438   Priority/Priority Byte Offset 438 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID437  ,Interrupt ID437  Priority/Priority Byte Offset 437 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID436  ,Interrupt ID436   Priority/Priority Byte Offset 436 "
group.long 0x5B8++0x03
line.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110"
hexmask.long.byte 0x00 24.--31. 1. " INTID443  ,Interrupt ID443  Priority/Priority Byte Offset 443 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID442  ,Interrupt ID442   Priority/Priority Byte Offset 442 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID441  ,Interrupt ID441  Priority/Priority Byte Offset 441 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID440  ,Interrupt ID440   Priority/Priority Byte Offset 440 "
group.long 0x5BC++0x03
line.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111"
hexmask.long.byte 0x00 24.--31. 1. " INTID447  ,Interrupt ID447  Priority/Priority Byte Offset 447 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID446  ,Interrupt ID446   Priority/Priority Byte Offset 446 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID445  ,Interrupt ID445  Priority/Priority Byte Offset 445 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID444  ,Interrupt ID444   Priority/Priority Byte Offset 444 "
else
rgroup.long 0x5A0++0x03
line.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104"
rgroup.long 0x5A4++0x03
line.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105"
rgroup.long 0x5A8++0x03
line.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106"
rgroup.long 0x5AC++0x03
line.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107"
rgroup.long 0x5B0++0x03
line.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108"
rgroup.long 0x5B4++0x03
line.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109"
rgroup.long 0x5B8++0x03
line.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110"
rgroup.long 0x5BC++0x03
line.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)
group.long 0x5C0++0x03
line.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112"
hexmask.long.byte 0x00 24.--31. 1. " INTID451  ,Interrupt ID451  Priority/Priority Byte Offset 451 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID450  ,Interrupt ID450   Priority/Priority Byte Offset 450 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID449  ,Interrupt ID449  Priority/Priority Byte Offset 449 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID448  ,Interrupt ID448   Priority/Priority Byte Offset 448 "
group.long 0x5C4++0x03
line.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113"
hexmask.long.byte 0x00 24.--31. 1. " INTID455  ,Interrupt ID455  Priority/Priority Byte Offset 455 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID454  ,Interrupt ID454   Priority/Priority Byte Offset 454 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID453  ,Interrupt ID453  Priority/Priority Byte Offset 453 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID452  ,Interrupt ID452   Priority/Priority Byte Offset 452 "
group.long 0x5C8++0x03
line.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114"
hexmask.long.byte 0x00 24.--31. 1. " INTID459  ,Interrupt ID459  Priority/Priority Byte Offset 459 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID458  ,Interrupt ID458   Priority/Priority Byte Offset 458 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID457  ,Interrupt ID457  Priority/Priority Byte Offset 457 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID456  ,Interrupt ID456   Priority/Priority Byte Offset 456 "
group.long 0x5CC++0x03
line.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115"
hexmask.long.byte 0x00 24.--31. 1. " INTID463  ,Interrupt ID463  Priority/Priority Byte Offset 463 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID462  ,Interrupt ID462   Priority/Priority Byte Offset 462 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID461  ,Interrupt ID461  Priority/Priority Byte Offset 461 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID460  ,Interrupt ID460   Priority/Priority Byte Offset 460 "
group.long 0x5D0++0x03
line.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116"
hexmask.long.byte 0x00 24.--31. 1. " INTID467  ,Interrupt ID467  Priority/Priority Byte Offset 467 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID466  ,Interrupt ID466   Priority/Priority Byte Offset 466 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID465  ,Interrupt ID465  Priority/Priority Byte Offset 465 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID464  ,Interrupt ID464   Priority/Priority Byte Offset 464 "
group.long 0x5D4++0x03
line.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117"
hexmask.long.byte 0x00 24.--31. 1. " INTID471  ,Interrupt ID471  Priority/Priority Byte Offset 471 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID470  ,Interrupt ID470   Priority/Priority Byte Offset 470 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID469  ,Interrupt ID469  Priority/Priority Byte Offset 469 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID468  ,Interrupt ID468   Priority/Priority Byte Offset 468 "
group.long 0x5D8++0x03
line.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118"
hexmask.long.byte 0x00 24.--31. 1. " INTID475  ,Interrupt ID475  Priority/Priority Byte Offset 475 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID474  ,Interrupt ID474   Priority/Priority Byte Offset 474 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID473  ,Interrupt ID473  Priority/Priority Byte Offset 473 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID472  ,Interrupt ID472   Priority/Priority Byte Offset 472 "
group.long 0x5DC++0x03
line.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119"
hexmask.long.byte 0x00 24.--31. 1. " INTID479  ,Interrupt ID479  Priority/Priority Byte Offset 479 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID478  ,Interrupt ID478   Priority/Priority Byte Offset 478 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID477  ,Interrupt ID477  Priority/Priority Byte Offset 477 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID476  ,Interrupt ID476   Priority/Priority Byte Offset 476 "
else
rgroup.long 0x5C0++0x03
line.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112"
rgroup.long 0x5C4++0x03
line.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113"
rgroup.long 0x5C8++0x03
line.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114"
rgroup.long 0x5CC++0x03
line.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115"
rgroup.long 0x5D0++0x03
line.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116"
rgroup.long 0x5D4++0x03
line.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117"
rgroup.long 0x5D8++0x03
line.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118"
rgroup.long 0x5DC++0x03
line.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)
group.long 0x5E0++0x03
line.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120"
hexmask.long.byte 0x00 24.--31. 1. " INTID483  ,Interrupt ID483  Priority/Priority Byte Offset 483 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID482  ,Interrupt ID482   Priority/Priority Byte Offset 482 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID481  ,Interrupt ID481  Priority/Priority Byte Offset 481 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID480  ,Interrupt ID480   Priority/Priority Byte Offset 480 "
group.long 0x5E4++0x03
line.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121"
hexmask.long.byte 0x00 24.--31. 1. " INTID487  ,Interrupt ID487  Priority/Priority Byte Offset 487 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID486  ,Interrupt ID486   Priority/Priority Byte Offset 486 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID485  ,Interrupt ID485  Priority/Priority Byte Offset 485 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID484  ,Interrupt ID484   Priority/Priority Byte Offset 484 "
group.long 0x5E8++0x03
line.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122"
hexmask.long.byte 0x00 24.--31. 1. " INTID491  ,Interrupt ID491  Priority/Priority Byte Offset 491 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID490  ,Interrupt ID490   Priority/Priority Byte Offset 490 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID489  ,Interrupt ID489  Priority/Priority Byte Offset 489 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID488  ,Interrupt ID488   Priority/Priority Byte Offset 488 "
group.long 0x5EC++0x03
line.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123"
hexmask.long.byte 0x00 24.--31. 1. " INTID495  ,Interrupt ID495  Priority/Priority Byte Offset 495 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID494  ,Interrupt ID494   Priority/Priority Byte Offset 494 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID493  ,Interrupt ID493  Priority/Priority Byte Offset 493 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID492  ,Interrupt ID492   Priority/Priority Byte Offset 492 "
group.long 0x5F0++0x03
line.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124"
hexmask.long.byte 0x00 24.--31. 1. " INTID499  ,Interrupt ID499  Priority/Priority Byte Offset 499 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID498  ,Interrupt ID498   Priority/Priority Byte Offset 498 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID497  ,Interrupt ID497  Priority/Priority Byte Offset 497 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID496  ,Interrupt ID496   Priority/Priority Byte Offset 496 "
group.long 0x5F4++0x03
line.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125"
hexmask.long.byte 0x00 24.--31. 1. " INTID503  ,Interrupt ID503  Priority/Priority Byte Offset 503 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID502  ,Interrupt ID502   Priority/Priority Byte Offset 502 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID501  ,Interrupt ID501  Priority/Priority Byte Offset 501 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID500  ,Interrupt ID500   Priority/Priority Byte Offset 500 "
group.long 0x5F8++0x03
line.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126"
hexmask.long.byte 0x00 24.--31. 1. " INTID507  ,Interrupt ID507  Priority/Priority Byte Offset 507 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID506  ,Interrupt ID506   Priority/Priority Byte Offset 506 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID505  ,Interrupt ID505  Priority/Priority Byte Offset 505 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID504  ,Interrupt ID504   Priority/Priority Byte Offset 504 "
group.long 0x5FC++0x03
line.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127"
hexmask.long.byte 0x00 24.--31. 1. " INTID511  ,Interrupt ID511  Priority/Priority Byte Offset 511 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID510  ,Interrupt ID510   Priority/Priority Byte Offset 510 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID509  ,Interrupt ID509  Priority/Priority Byte Offset 509 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID508  ,Interrupt ID508   Priority/Priority Byte Offset 508 "
else
rgroup.long 0x5E0++0x03
line.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120"
rgroup.long 0x5E4++0x03
line.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121"
rgroup.long 0x5E8++0x03
line.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122"
rgroup.long 0x5EC++0x03
line.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123"
rgroup.long 0x5F0++0x03
line.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124"
rgroup.long 0x5F4++0x03
line.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125"
rgroup.long 0x5F8++0x03
line.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126"
rgroup.long 0x5FC++0x03
line.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)
group.long 0x600++0x03
line.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128"
hexmask.long.byte 0x00 24.--31. 1. " INTID515  ,Interrupt ID515  Priority/Priority Byte Offset 515 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID514  ,Interrupt ID514   Priority/Priority Byte Offset 514 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID513  ,Interrupt ID513  Priority/Priority Byte Offset 513 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID512  ,Interrupt ID512   Priority/Priority Byte Offset 512 "
group.long 0x604++0x03
line.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129"
hexmask.long.byte 0x00 24.--31. 1. " INTID519  ,Interrupt ID519  Priority/Priority Byte Offset 519 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID518  ,Interrupt ID518   Priority/Priority Byte Offset 518 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID517  ,Interrupt ID517  Priority/Priority Byte Offset 517 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID516  ,Interrupt ID516   Priority/Priority Byte Offset 516 "
group.long 0x608++0x03
line.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130"
hexmask.long.byte 0x00 24.--31. 1. " INTID523  ,Interrupt ID523  Priority/Priority Byte Offset 523 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID522  ,Interrupt ID522   Priority/Priority Byte Offset 522 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID521  ,Interrupt ID521  Priority/Priority Byte Offset 521 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID520  ,Interrupt ID520   Priority/Priority Byte Offset 520 "
group.long 0x60C++0x03
line.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131"
hexmask.long.byte 0x00 24.--31. 1. " INTID527  ,Interrupt ID527  Priority/Priority Byte Offset 527 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID526  ,Interrupt ID526   Priority/Priority Byte Offset 526 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID525  ,Interrupt ID525  Priority/Priority Byte Offset 525 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID524  ,Interrupt ID524   Priority/Priority Byte Offset 524 "
group.long 0x610++0x03
line.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132"
hexmask.long.byte 0x00 24.--31. 1. " INTID531  ,Interrupt ID531  Priority/Priority Byte Offset 531 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID530  ,Interrupt ID530   Priority/Priority Byte Offset 530 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID529  ,Interrupt ID529  Priority/Priority Byte Offset 529 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID528  ,Interrupt ID528   Priority/Priority Byte Offset 528 "
group.long 0x614++0x03
line.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133"
hexmask.long.byte 0x00 24.--31. 1. " INTID535  ,Interrupt ID535  Priority/Priority Byte Offset 535 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID534  ,Interrupt ID534   Priority/Priority Byte Offset 534 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID533  ,Interrupt ID533  Priority/Priority Byte Offset 533 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID532  ,Interrupt ID532   Priority/Priority Byte Offset 532 "
group.long 0x618++0x03
line.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134"
hexmask.long.byte 0x00 24.--31. 1. " INTID539  ,Interrupt ID539  Priority/Priority Byte Offset 539 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID538  ,Interrupt ID538   Priority/Priority Byte Offset 538 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID537  ,Interrupt ID537  Priority/Priority Byte Offset 537 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID536  ,Interrupt ID536   Priority/Priority Byte Offset 536 "
group.long 0x61C++0x03
line.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135"
hexmask.long.byte 0x00 24.--31. 1. " INTID543  ,Interrupt ID543  Priority/Priority Byte Offset 543 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID542  ,Interrupt ID542   Priority/Priority Byte Offset 542 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID541  ,Interrupt ID541  Priority/Priority Byte Offset 541 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID540  ,Interrupt ID540   Priority/Priority Byte Offset 540 "
else
rgroup.long 0x600++0x03
line.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128"
rgroup.long 0x604++0x03
line.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129"
rgroup.long 0x608++0x03
line.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130"
rgroup.long 0x60C++0x03
line.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131"
rgroup.long 0x610++0x03
line.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132"
rgroup.long 0x614++0x03
line.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133"
rgroup.long 0x618++0x03
line.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134"
rgroup.long 0x61C++0x03
line.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)
group.long 0x620++0x03
line.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136"
hexmask.long.byte 0x00 24.--31. 1. " INTID547  ,Interrupt ID547  Priority/Priority Byte Offset 547 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID546  ,Interrupt ID546   Priority/Priority Byte Offset 546 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID545  ,Interrupt ID545  Priority/Priority Byte Offset 545 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID544  ,Interrupt ID544   Priority/Priority Byte Offset 544 "
group.long 0x624++0x03
line.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137"
hexmask.long.byte 0x00 24.--31. 1. " INTID551  ,Interrupt ID551  Priority/Priority Byte Offset 551 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID550  ,Interrupt ID550   Priority/Priority Byte Offset 550 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID549  ,Interrupt ID549  Priority/Priority Byte Offset 549 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID548  ,Interrupt ID548   Priority/Priority Byte Offset 548 "
group.long 0x628++0x03
line.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138"
hexmask.long.byte 0x00 24.--31. 1. " INTID555  ,Interrupt ID555  Priority/Priority Byte Offset 555 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID554  ,Interrupt ID554   Priority/Priority Byte Offset 554 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID553  ,Interrupt ID553  Priority/Priority Byte Offset 553 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID552  ,Interrupt ID552   Priority/Priority Byte Offset 552 "
group.long 0x62C++0x03
line.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139"
hexmask.long.byte 0x00 24.--31. 1. " INTID559  ,Interrupt ID559  Priority/Priority Byte Offset 559 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID558  ,Interrupt ID558   Priority/Priority Byte Offset 558 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID557  ,Interrupt ID557  Priority/Priority Byte Offset 557 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID556  ,Interrupt ID556   Priority/Priority Byte Offset 556 "
group.long 0x630++0x03
line.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140"
hexmask.long.byte 0x00 24.--31. 1. " INTID563  ,Interrupt ID563  Priority/Priority Byte Offset 563 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID562  ,Interrupt ID562   Priority/Priority Byte Offset 562 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID561  ,Interrupt ID561  Priority/Priority Byte Offset 561 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID560  ,Interrupt ID560   Priority/Priority Byte Offset 560 "
group.long 0x634++0x03
line.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141"
hexmask.long.byte 0x00 24.--31. 1. " INTID567  ,Interrupt ID567  Priority/Priority Byte Offset 567 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID566  ,Interrupt ID566   Priority/Priority Byte Offset 566 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID565  ,Interrupt ID565  Priority/Priority Byte Offset 565 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID564  ,Interrupt ID564   Priority/Priority Byte Offset 564 "
group.long 0x638++0x03
line.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142"
hexmask.long.byte 0x00 24.--31. 1. " INTID571  ,Interrupt ID571  Priority/Priority Byte Offset 571 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID570  ,Interrupt ID570   Priority/Priority Byte Offset 570 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID569  ,Interrupt ID569  Priority/Priority Byte Offset 569 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID568  ,Interrupt ID568   Priority/Priority Byte Offset 568 "
group.long 0x63C++0x03
line.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143"
hexmask.long.byte 0x00 24.--31. 1. " INTID575  ,Interrupt ID575  Priority/Priority Byte Offset 575 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID574  ,Interrupt ID574   Priority/Priority Byte Offset 574 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID573  ,Interrupt ID573  Priority/Priority Byte Offset 573 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID572  ,Interrupt ID572   Priority/Priority Byte Offset 572 "
else
rgroup.long 0x620++0x03
line.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136"
rgroup.long 0x624++0x03
line.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137"
rgroup.long 0x628++0x03
line.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138"
rgroup.long 0x62C++0x03
line.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139"
rgroup.long 0x630++0x03
line.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140"
rgroup.long 0x634++0x03
line.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141"
rgroup.long 0x638++0x03
line.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142"
rgroup.long 0x63C++0x03
line.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)
group.long 0x640++0x03
line.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144"
hexmask.long.byte 0x00 24.--31. 1. " INTID579  ,Interrupt ID579  Priority/Priority Byte Offset 579 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID578  ,Interrupt ID578   Priority/Priority Byte Offset 578 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID577  ,Interrupt ID577  Priority/Priority Byte Offset 577 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID576  ,Interrupt ID576   Priority/Priority Byte Offset 576 "
group.long 0x644++0x03
line.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145"
hexmask.long.byte 0x00 24.--31. 1. " INTID583  ,Interrupt ID583  Priority/Priority Byte Offset 583 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID582  ,Interrupt ID582   Priority/Priority Byte Offset 582 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID581  ,Interrupt ID581  Priority/Priority Byte Offset 581 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID580  ,Interrupt ID580   Priority/Priority Byte Offset 580 "
group.long 0x648++0x03
line.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146"
hexmask.long.byte 0x00 24.--31. 1. " INTID587  ,Interrupt ID587  Priority/Priority Byte Offset 587 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID586  ,Interrupt ID586   Priority/Priority Byte Offset 586 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID585  ,Interrupt ID585  Priority/Priority Byte Offset 585 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID584  ,Interrupt ID584   Priority/Priority Byte Offset 584 "
group.long 0x64C++0x03
line.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147"
hexmask.long.byte 0x00 24.--31. 1. " INTID591  ,Interrupt ID591  Priority/Priority Byte Offset 591 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID590  ,Interrupt ID590   Priority/Priority Byte Offset 590 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID589  ,Interrupt ID589  Priority/Priority Byte Offset 589 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID588  ,Interrupt ID588   Priority/Priority Byte Offset 588 "
group.long 0x650++0x03
line.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148"
hexmask.long.byte 0x00 24.--31. 1. " INTID595  ,Interrupt ID595  Priority/Priority Byte Offset 595 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID594  ,Interrupt ID594   Priority/Priority Byte Offset 594 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID593  ,Interrupt ID593  Priority/Priority Byte Offset 593 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID592  ,Interrupt ID592   Priority/Priority Byte Offset 592 "
group.long 0x654++0x03
line.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149"
hexmask.long.byte 0x00 24.--31. 1. " INTID599  ,Interrupt ID599  Priority/Priority Byte Offset 599 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID598  ,Interrupt ID598   Priority/Priority Byte Offset 598 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID597  ,Interrupt ID597  Priority/Priority Byte Offset 597 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID596  ,Interrupt ID596   Priority/Priority Byte Offset 596 "
group.long 0x658++0x03
line.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150"
hexmask.long.byte 0x00 24.--31. 1. " INTID603  ,Interrupt ID603  Priority/Priority Byte Offset 603 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID602  ,Interrupt ID602   Priority/Priority Byte Offset 602 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID601  ,Interrupt ID601  Priority/Priority Byte Offset 601 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID600  ,Interrupt ID600   Priority/Priority Byte Offset 600 "
group.long 0x65C++0x03
line.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151"
hexmask.long.byte 0x00 24.--31. 1. " INTID607  ,Interrupt ID607  Priority/Priority Byte Offset 607 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID606  ,Interrupt ID606   Priority/Priority Byte Offset 606 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID605  ,Interrupt ID605  Priority/Priority Byte Offset 605 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID604  ,Interrupt ID604   Priority/Priority Byte Offset 604 "
else
rgroup.long 0x640++0x03
line.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144"
rgroup.long 0x644++0x03
line.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145"
rgroup.long 0x648++0x03
line.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146"
rgroup.long 0x64C++0x03
line.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147"
rgroup.long 0x650++0x03
line.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148"
rgroup.long 0x654++0x03
line.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149"
rgroup.long 0x658++0x03
line.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150"
rgroup.long 0x65C++0x03
line.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)
group.long 0x660++0x03
line.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152"
hexmask.long.byte 0x00 24.--31. 1. " INTID611  ,Interrupt ID611  Priority/Priority Byte Offset 611 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID610  ,Interrupt ID610   Priority/Priority Byte Offset 610 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID609  ,Interrupt ID609  Priority/Priority Byte Offset 609 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID608  ,Interrupt ID608   Priority/Priority Byte Offset 608 "
group.long 0x664++0x03
line.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153"
hexmask.long.byte 0x00 24.--31. 1. " INTID615  ,Interrupt ID615  Priority/Priority Byte Offset 615 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID614  ,Interrupt ID614   Priority/Priority Byte Offset 614 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID613  ,Interrupt ID613  Priority/Priority Byte Offset 613 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID612  ,Interrupt ID612   Priority/Priority Byte Offset 612 "
group.long 0x668++0x03
line.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154"
hexmask.long.byte 0x00 24.--31. 1. " INTID619  ,Interrupt ID619  Priority/Priority Byte Offset 619 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID618  ,Interrupt ID618   Priority/Priority Byte Offset 618 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID617  ,Interrupt ID617  Priority/Priority Byte Offset 617 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID616  ,Interrupt ID616   Priority/Priority Byte Offset 616 "
group.long 0x66C++0x03
line.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155"
hexmask.long.byte 0x00 24.--31. 1. " INTID623  ,Interrupt ID623  Priority/Priority Byte Offset 623 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID622  ,Interrupt ID622   Priority/Priority Byte Offset 622 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID621  ,Interrupt ID621  Priority/Priority Byte Offset 621 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID620  ,Interrupt ID620   Priority/Priority Byte Offset 620 "
group.long 0x670++0x03
line.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156"
hexmask.long.byte 0x00 24.--31. 1. " INTID627  ,Interrupt ID627  Priority/Priority Byte Offset 627 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID626  ,Interrupt ID626   Priority/Priority Byte Offset 626 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID625  ,Interrupt ID625  Priority/Priority Byte Offset 625 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID624  ,Interrupt ID624   Priority/Priority Byte Offset 624 "
group.long 0x674++0x03
line.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157"
hexmask.long.byte 0x00 24.--31. 1. " INTID631  ,Interrupt ID631  Priority/Priority Byte Offset 631 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID630  ,Interrupt ID630   Priority/Priority Byte Offset 630 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID629  ,Interrupt ID629  Priority/Priority Byte Offset 629 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID628  ,Interrupt ID628   Priority/Priority Byte Offset 628 "
group.long 0x678++0x03
line.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158"
hexmask.long.byte 0x00 24.--31. 1. " INTID635  ,Interrupt ID635  Priority/Priority Byte Offset 635 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID634  ,Interrupt ID634   Priority/Priority Byte Offset 634 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID633  ,Interrupt ID633  Priority/Priority Byte Offset 633 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID632  ,Interrupt ID632   Priority/Priority Byte Offset 632 "
group.long 0x67C++0x03
line.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159"
hexmask.long.byte 0x00 24.--31. 1. " INTID639  ,Interrupt ID639  Priority/Priority Byte Offset 639 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID638  ,Interrupt ID638   Priority/Priority Byte Offset 638 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID637  ,Interrupt ID637  Priority/Priority Byte Offset 637 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID636  ,Interrupt ID636   Priority/Priority Byte Offset 636 "
else
rgroup.long 0x660++0x03
line.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152"
rgroup.long 0x664++0x03
line.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153"
rgroup.long 0x668++0x03
line.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154"
rgroup.long 0x66C++0x03
line.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155"
rgroup.long 0x670++0x03
line.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156"
rgroup.long 0x674++0x03
line.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157"
rgroup.long 0x678++0x03
line.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158"
rgroup.long 0x67C++0x03
line.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)
group.long 0x680++0x03
line.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160"
hexmask.long.byte 0x00 24.--31. 1. " INTID643  ,Interrupt ID643  Priority/Priority Byte Offset 643 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID642  ,Interrupt ID642   Priority/Priority Byte Offset 642 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID641  ,Interrupt ID641  Priority/Priority Byte Offset 641 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID640  ,Interrupt ID640   Priority/Priority Byte Offset 640 "
group.long 0x684++0x03
line.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161"
hexmask.long.byte 0x00 24.--31. 1. " INTID647  ,Interrupt ID647  Priority/Priority Byte Offset 647 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID646  ,Interrupt ID646   Priority/Priority Byte Offset 646 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID645  ,Interrupt ID645  Priority/Priority Byte Offset 645 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID644  ,Interrupt ID644   Priority/Priority Byte Offset 644 "
group.long 0x688++0x03
line.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162"
hexmask.long.byte 0x00 24.--31. 1. " INTID651  ,Interrupt ID651  Priority/Priority Byte Offset 651 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID650  ,Interrupt ID650   Priority/Priority Byte Offset 650 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID649  ,Interrupt ID649  Priority/Priority Byte Offset 649 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID648  ,Interrupt ID648   Priority/Priority Byte Offset 648 "
group.long 0x68C++0x03
line.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163"
hexmask.long.byte 0x00 24.--31. 1. " INTID655  ,Interrupt ID655  Priority/Priority Byte Offset 655 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID654  ,Interrupt ID654   Priority/Priority Byte Offset 654 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID653  ,Interrupt ID653  Priority/Priority Byte Offset 653 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID652  ,Interrupt ID652   Priority/Priority Byte Offset 652 "
group.long 0x690++0x03
line.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164"
hexmask.long.byte 0x00 24.--31. 1. " INTID659  ,Interrupt ID659  Priority/Priority Byte Offset 659 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID658  ,Interrupt ID658   Priority/Priority Byte Offset 658 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID657  ,Interrupt ID657  Priority/Priority Byte Offset 657 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID656  ,Interrupt ID656   Priority/Priority Byte Offset 656 "
group.long 0x694++0x03
line.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165"
hexmask.long.byte 0x00 24.--31. 1. " INTID663  ,Interrupt ID663  Priority/Priority Byte Offset 663 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID662  ,Interrupt ID662   Priority/Priority Byte Offset 662 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID661  ,Interrupt ID661  Priority/Priority Byte Offset 661 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID660  ,Interrupt ID660   Priority/Priority Byte Offset 660 "
group.long 0x698++0x03
line.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166"
hexmask.long.byte 0x00 24.--31. 1. " INTID667  ,Interrupt ID667  Priority/Priority Byte Offset 667 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID666  ,Interrupt ID666   Priority/Priority Byte Offset 666 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID665  ,Interrupt ID665  Priority/Priority Byte Offset 665 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID664  ,Interrupt ID664   Priority/Priority Byte Offset 664 "
group.long 0x69C++0x03
line.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167"
hexmask.long.byte 0x00 24.--31. 1. " INTID671  ,Interrupt ID671  Priority/Priority Byte Offset 671 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID670  ,Interrupt ID670   Priority/Priority Byte Offset 670 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID669  ,Interrupt ID669  Priority/Priority Byte Offset 669 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID668  ,Interrupt ID668   Priority/Priority Byte Offset 668 "
else
rgroup.long 0x680++0x03
line.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160"
rgroup.long 0x684++0x03
line.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161"
rgroup.long 0x688++0x03
line.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162"
rgroup.long 0x68C++0x03
line.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163"
rgroup.long 0x690++0x03
line.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164"
rgroup.long 0x694++0x03
line.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165"
rgroup.long 0x698++0x03
line.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166"
rgroup.long 0x69C++0x03
line.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)
group.long 0x6A0++0x03
line.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168"
hexmask.long.byte 0x00 24.--31. 1. " INTID675  ,Interrupt ID675  Priority/Priority Byte Offset 675 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID674  ,Interrupt ID674   Priority/Priority Byte Offset 674 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID673  ,Interrupt ID673  Priority/Priority Byte Offset 673 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID672  ,Interrupt ID672   Priority/Priority Byte Offset 672 "
group.long 0x6A4++0x03
line.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169"
hexmask.long.byte 0x00 24.--31. 1. " INTID679  ,Interrupt ID679  Priority/Priority Byte Offset 679 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID678  ,Interrupt ID678   Priority/Priority Byte Offset 678 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID677  ,Interrupt ID677  Priority/Priority Byte Offset 677 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID676  ,Interrupt ID676   Priority/Priority Byte Offset 676 "
group.long 0x6A8++0x03
line.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170"
hexmask.long.byte 0x00 24.--31. 1. " INTID683  ,Interrupt ID683  Priority/Priority Byte Offset 683 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID682  ,Interrupt ID682   Priority/Priority Byte Offset 682 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID681  ,Interrupt ID681  Priority/Priority Byte Offset 681 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID680  ,Interrupt ID680   Priority/Priority Byte Offset 680 "
group.long 0x6AC++0x03
line.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171"
hexmask.long.byte 0x00 24.--31. 1. " INTID687  ,Interrupt ID687  Priority/Priority Byte Offset 687 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID686  ,Interrupt ID686   Priority/Priority Byte Offset 686 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID685  ,Interrupt ID685  Priority/Priority Byte Offset 685 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID684  ,Interrupt ID684   Priority/Priority Byte Offset 684 "
group.long 0x6B0++0x03
line.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172"
hexmask.long.byte 0x00 24.--31. 1. " INTID691  ,Interrupt ID691  Priority/Priority Byte Offset 691 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID690  ,Interrupt ID690   Priority/Priority Byte Offset 690 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID689  ,Interrupt ID689  Priority/Priority Byte Offset 689 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID688  ,Interrupt ID688   Priority/Priority Byte Offset 688 "
group.long 0x6B4++0x03
line.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173"
hexmask.long.byte 0x00 24.--31. 1. " INTID695  ,Interrupt ID695  Priority/Priority Byte Offset 695 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID694  ,Interrupt ID694   Priority/Priority Byte Offset 694 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID693  ,Interrupt ID693  Priority/Priority Byte Offset 693 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID692  ,Interrupt ID692   Priority/Priority Byte Offset 692 "
group.long 0x6B8++0x03
line.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174"
hexmask.long.byte 0x00 24.--31. 1. " INTID699  ,Interrupt ID699  Priority/Priority Byte Offset 699 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID698  ,Interrupt ID698   Priority/Priority Byte Offset 698 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID697  ,Interrupt ID697  Priority/Priority Byte Offset 697 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID696  ,Interrupt ID696   Priority/Priority Byte Offset 696 "
group.long 0x6BC++0x03
line.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175"
hexmask.long.byte 0x00 24.--31. 1. " INTID703  ,Interrupt ID703  Priority/Priority Byte Offset 703 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID702  ,Interrupt ID702   Priority/Priority Byte Offset 702 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID701  ,Interrupt ID701  Priority/Priority Byte Offset 701 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID700  ,Interrupt ID700   Priority/Priority Byte Offset 700 "
else
rgroup.long 0x6A0++0x03
line.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168"
rgroup.long 0x6A4++0x03
line.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169"
rgroup.long 0x6A8++0x03
line.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170"
rgroup.long 0x6AC++0x03
line.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171"
rgroup.long 0x6B0++0x03
line.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172"
rgroup.long 0x6B4++0x03
line.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173"
rgroup.long 0x6B8++0x03
line.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174"
rgroup.long 0x6BC++0x03
line.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)
group.long 0x6C0++0x03
line.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176"
hexmask.long.byte 0x00 24.--31. 1. " INTID707  ,Interrupt ID707  Priority/Priority Byte Offset 707 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID706  ,Interrupt ID706   Priority/Priority Byte Offset 706 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID705  ,Interrupt ID705  Priority/Priority Byte Offset 705 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID704  ,Interrupt ID704   Priority/Priority Byte Offset 704 "
group.long 0x6C4++0x03
line.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177"
hexmask.long.byte 0x00 24.--31. 1. " INTID711  ,Interrupt ID711  Priority/Priority Byte Offset 711 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID710  ,Interrupt ID710   Priority/Priority Byte Offset 710 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID709  ,Interrupt ID709  Priority/Priority Byte Offset 709 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID708  ,Interrupt ID708   Priority/Priority Byte Offset 708 "
group.long 0x6C8++0x03
line.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178"
hexmask.long.byte 0x00 24.--31. 1. " INTID715  ,Interrupt ID715  Priority/Priority Byte Offset 715 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID714  ,Interrupt ID714   Priority/Priority Byte Offset 714 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID713  ,Interrupt ID713  Priority/Priority Byte Offset 713 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID712  ,Interrupt ID712   Priority/Priority Byte Offset 712 "
group.long 0x6CC++0x03
line.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179"
hexmask.long.byte 0x00 24.--31. 1. " INTID719  ,Interrupt ID719  Priority/Priority Byte Offset 719 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID718  ,Interrupt ID718   Priority/Priority Byte Offset 718 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID717  ,Interrupt ID717  Priority/Priority Byte Offset 717 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID716  ,Interrupt ID716   Priority/Priority Byte Offset 716 "
group.long 0x6D0++0x03
line.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180"
hexmask.long.byte 0x00 24.--31. 1. " INTID723  ,Interrupt ID723  Priority/Priority Byte Offset 723 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID722  ,Interrupt ID722   Priority/Priority Byte Offset 722 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID721  ,Interrupt ID721  Priority/Priority Byte Offset 721 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID720  ,Interrupt ID720   Priority/Priority Byte Offset 720 "
group.long 0x6D4++0x03
line.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181"
hexmask.long.byte 0x00 24.--31. 1. " INTID727  ,Interrupt ID727  Priority/Priority Byte Offset 727 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID726  ,Interrupt ID726   Priority/Priority Byte Offset 726 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID725  ,Interrupt ID725  Priority/Priority Byte Offset 725 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID724  ,Interrupt ID724   Priority/Priority Byte Offset 724 "
group.long 0x6D8++0x03
line.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182"
hexmask.long.byte 0x00 24.--31. 1. " INTID731  ,Interrupt ID731  Priority/Priority Byte Offset 731 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID730  ,Interrupt ID730   Priority/Priority Byte Offset 730 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID729  ,Interrupt ID729  Priority/Priority Byte Offset 729 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID728  ,Interrupt ID728   Priority/Priority Byte Offset 728 "
group.long 0x6DC++0x03
line.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183"
hexmask.long.byte 0x00 24.--31. 1. " INTID735  ,Interrupt ID735  Priority/Priority Byte Offset 735 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID734  ,Interrupt ID734   Priority/Priority Byte Offset 734 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID733  ,Interrupt ID733  Priority/Priority Byte Offset 733 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID732  ,Interrupt ID732   Priority/Priority Byte Offset 732 "
else
rgroup.long 0x6C0++0x03
line.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176"
rgroup.long 0x6C4++0x03
line.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177"
rgroup.long 0x6C8++0x03
line.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178"
rgroup.long 0x6CC++0x03
line.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179"
rgroup.long 0x6D0++0x03
line.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180"
rgroup.long 0x6D4++0x03
line.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181"
rgroup.long 0x6D8++0x03
line.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182"
rgroup.long 0x6DC++0x03
line.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)
group.long 0x6E0++0x03
line.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184"
hexmask.long.byte 0x00 24.--31. 1. " INTID739  ,Interrupt ID739  Priority/Priority Byte Offset 739 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID738  ,Interrupt ID738   Priority/Priority Byte Offset 738 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID737  ,Interrupt ID737  Priority/Priority Byte Offset 737 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID736  ,Interrupt ID736   Priority/Priority Byte Offset 736 "
group.long 0x6E4++0x03
line.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185"
hexmask.long.byte 0x00 24.--31. 1. " INTID743  ,Interrupt ID743  Priority/Priority Byte Offset 743 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID742  ,Interrupt ID742   Priority/Priority Byte Offset 742 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID741  ,Interrupt ID741  Priority/Priority Byte Offset 741 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID740  ,Interrupt ID740   Priority/Priority Byte Offset 740 "
group.long 0x6E8++0x03
line.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186"
hexmask.long.byte 0x00 24.--31. 1. " INTID747  ,Interrupt ID747  Priority/Priority Byte Offset 747 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID746  ,Interrupt ID746   Priority/Priority Byte Offset 746 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID745  ,Interrupt ID745  Priority/Priority Byte Offset 745 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID744  ,Interrupt ID744   Priority/Priority Byte Offset 744 "
group.long 0x6EC++0x03
line.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187"
hexmask.long.byte 0x00 24.--31. 1. " INTID751  ,Interrupt ID751  Priority/Priority Byte Offset 751 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID750  ,Interrupt ID750   Priority/Priority Byte Offset 750 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID749  ,Interrupt ID749  Priority/Priority Byte Offset 749 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID748  ,Interrupt ID748   Priority/Priority Byte Offset 748 "
group.long 0x6F0++0x03
line.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188"
hexmask.long.byte 0x00 24.--31. 1. " INTID755  ,Interrupt ID755  Priority/Priority Byte Offset 755 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID754  ,Interrupt ID754   Priority/Priority Byte Offset 754 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID753  ,Interrupt ID753  Priority/Priority Byte Offset 753 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID752  ,Interrupt ID752   Priority/Priority Byte Offset 752 "
group.long 0x6F4++0x03
line.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189"
hexmask.long.byte 0x00 24.--31. 1. " INTID759  ,Interrupt ID759  Priority/Priority Byte Offset 759 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID758  ,Interrupt ID758   Priority/Priority Byte Offset 758 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID757  ,Interrupt ID757  Priority/Priority Byte Offset 757 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID756  ,Interrupt ID756   Priority/Priority Byte Offset 756 "
group.long 0x6F8++0x03
line.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190"
hexmask.long.byte 0x00 24.--31. 1. " INTID763  ,Interrupt ID763  Priority/Priority Byte Offset 763 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID762  ,Interrupt ID762   Priority/Priority Byte Offset 762 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID761  ,Interrupt ID761  Priority/Priority Byte Offset 761 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID760  ,Interrupt ID760   Priority/Priority Byte Offset 760 "
group.long 0x6FC++0x03
line.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191"
hexmask.long.byte 0x00 24.--31. 1. " INTID767  ,Interrupt ID767  Priority/Priority Byte Offset 767 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID766  ,Interrupt ID766   Priority/Priority Byte Offset 766 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID765  ,Interrupt ID765  Priority/Priority Byte Offset 765 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID764  ,Interrupt ID764   Priority/Priority Byte Offset 764 "
else
rgroup.long 0x6E0++0x03
line.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184"
rgroup.long 0x6E4++0x03
line.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185"
rgroup.long 0x6E8++0x03
line.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186"
rgroup.long 0x6EC++0x03
line.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187"
rgroup.long 0x6F0++0x03
line.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188"
rgroup.long 0x6F4++0x03
line.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189"
rgroup.long 0x6F8++0x03
line.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190"
rgroup.long 0x6FC++0x03
line.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)
group.long 0x700++0x03
line.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192"
hexmask.long.byte 0x00 24.--31. 1. " INTID771  ,Interrupt ID771  Priority/Priority Byte Offset 771 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID770  ,Interrupt ID770   Priority/Priority Byte Offset 770 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID769  ,Interrupt ID769  Priority/Priority Byte Offset 769 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID768  ,Interrupt ID768   Priority/Priority Byte Offset 768 "
group.long 0x704++0x03
line.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193"
hexmask.long.byte 0x00 24.--31. 1. " INTID775  ,Interrupt ID775  Priority/Priority Byte Offset 775 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID774  ,Interrupt ID774   Priority/Priority Byte Offset 774 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID773  ,Interrupt ID773  Priority/Priority Byte Offset 773 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID772  ,Interrupt ID772   Priority/Priority Byte Offset 772 "
group.long 0x708++0x03
line.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194"
hexmask.long.byte 0x00 24.--31. 1. " INTID779  ,Interrupt ID779  Priority/Priority Byte Offset 779 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID778  ,Interrupt ID778   Priority/Priority Byte Offset 778 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID777  ,Interrupt ID777  Priority/Priority Byte Offset 777 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID776  ,Interrupt ID776   Priority/Priority Byte Offset 776 "
group.long 0x70C++0x03
line.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195"
hexmask.long.byte 0x00 24.--31. 1. " INTID783  ,Interrupt ID783  Priority/Priority Byte Offset 783 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID782  ,Interrupt ID782   Priority/Priority Byte Offset 782 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID781  ,Interrupt ID781  Priority/Priority Byte Offset 781 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID780  ,Interrupt ID780   Priority/Priority Byte Offset 780 "
group.long 0x710++0x03
line.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196"
hexmask.long.byte 0x00 24.--31. 1. " INTID787  ,Interrupt ID787  Priority/Priority Byte Offset 787 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID786  ,Interrupt ID786   Priority/Priority Byte Offset 786 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID785  ,Interrupt ID785  Priority/Priority Byte Offset 785 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID784  ,Interrupt ID784   Priority/Priority Byte Offset 784 "
group.long 0x714++0x03
line.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197"
hexmask.long.byte 0x00 24.--31. 1. " INTID791  ,Interrupt ID791  Priority/Priority Byte Offset 791 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID790  ,Interrupt ID790   Priority/Priority Byte Offset 790 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID789  ,Interrupt ID789  Priority/Priority Byte Offset 789 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID788  ,Interrupt ID788   Priority/Priority Byte Offset 788 "
group.long 0x718++0x03
line.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198"
hexmask.long.byte 0x00 24.--31. 1. " INTID795  ,Interrupt ID795  Priority/Priority Byte Offset 795 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID794  ,Interrupt ID794   Priority/Priority Byte Offset 794 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID793  ,Interrupt ID793  Priority/Priority Byte Offset 793 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID792  ,Interrupt ID792   Priority/Priority Byte Offset 792 "
group.long 0x71C++0x03
line.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199"
hexmask.long.byte 0x00 24.--31. 1. " INTID799  ,Interrupt ID799  Priority/Priority Byte Offset 799 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID798  ,Interrupt ID798   Priority/Priority Byte Offset 798 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID797  ,Interrupt ID797  Priority/Priority Byte Offset 797 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID796  ,Interrupt ID796   Priority/Priority Byte Offset 796 "
else
rgroup.long 0x700++0x03
line.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192"
rgroup.long 0x704++0x03
line.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193"
rgroup.long 0x708++0x03
line.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194"
rgroup.long 0x70C++0x03
line.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195"
rgroup.long 0x710++0x03
line.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196"
rgroup.long 0x714++0x03
line.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197"
rgroup.long 0x718++0x03
line.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198"
rgroup.long 0x71C++0x03
line.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)
group.long 0x720++0x03
line.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200"
hexmask.long.byte 0x00 24.--31. 1. " INTID803  ,Interrupt ID803  Priority/Priority Byte Offset 803 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID802  ,Interrupt ID802   Priority/Priority Byte Offset 802 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID801  ,Interrupt ID801  Priority/Priority Byte Offset 801 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID800  ,Interrupt ID800   Priority/Priority Byte Offset 800 "
group.long 0x724++0x03
line.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201"
hexmask.long.byte 0x00 24.--31. 1. " INTID807  ,Interrupt ID807  Priority/Priority Byte Offset 807 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID806  ,Interrupt ID806   Priority/Priority Byte Offset 806 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID805  ,Interrupt ID805  Priority/Priority Byte Offset 805 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID804  ,Interrupt ID804   Priority/Priority Byte Offset 804 "
group.long 0x728++0x03
line.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202"
hexmask.long.byte 0x00 24.--31. 1. " INTID811  ,Interrupt ID811  Priority/Priority Byte Offset 811 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID810  ,Interrupt ID810   Priority/Priority Byte Offset 810 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID809  ,Interrupt ID809  Priority/Priority Byte Offset 809 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID808  ,Interrupt ID808   Priority/Priority Byte Offset 808 "
group.long 0x72C++0x03
line.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203"
hexmask.long.byte 0x00 24.--31. 1. " INTID815  ,Interrupt ID815  Priority/Priority Byte Offset 815 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID814  ,Interrupt ID814   Priority/Priority Byte Offset 814 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID813  ,Interrupt ID813  Priority/Priority Byte Offset 813 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID812  ,Interrupt ID812   Priority/Priority Byte Offset 812 "
group.long 0x730++0x03
line.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204"
hexmask.long.byte 0x00 24.--31. 1. " INTID819  ,Interrupt ID819  Priority/Priority Byte Offset 819 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID818  ,Interrupt ID818   Priority/Priority Byte Offset 818 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID817  ,Interrupt ID817  Priority/Priority Byte Offset 817 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID816  ,Interrupt ID816   Priority/Priority Byte Offset 816 "
group.long 0x734++0x03
line.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205"
hexmask.long.byte 0x00 24.--31. 1. " INTID823  ,Interrupt ID823  Priority/Priority Byte Offset 823 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID822  ,Interrupt ID822   Priority/Priority Byte Offset 822 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID821  ,Interrupt ID821  Priority/Priority Byte Offset 821 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID820  ,Interrupt ID820   Priority/Priority Byte Offset 820 "
group.long 0x738++0x03
line.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206"
hexmask.long.byte 0x00 24.--31. 1. " INTID827  ,Interrupt ID827  Priority/Priority Byte Offset 827 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID826  ,Interrupt ID826   Priority/Priority Byte Offset 826 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID825  ,Interrupt ID825  Priority/Priority Byte Offset 825 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID824  ,Interrupt ID824   Priority/Priority Byte Offset 824 "
group.long 0x73C++0x03
line.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207"
hexmask.long.byte 0x00 24.--31. 1. " INTID831  ,Interrupt ID831  Priority/Priority Byte Offset 831 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID830  ,Interrupt ID830   Priority/Priority Byte Offset 830 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID829  ,Interrupt ID829  Priority/Priority Byte Offset 829 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID828  ,Interrupt ID828   Priority/Priority Byte Offset 828 "
else
rgroup.long 0x720++0x03
line.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200"
rgroup.long 0x724++0x03
line.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201"
rgroup.long 0x728++0x03
line.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202"
rgroup.long 0x72C++0x03
line.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203"
rgroup.long 0x730++0x03
line.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204"
rgroup.long 0x734++0x03
line.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205"
rgroup.long 0x738++0x03
line.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206"
rgroup.long 0x73C++0x03
line.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)
group.long 0x740++0x03
line.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208"
hexmask.long.byte 0x00 24.--31. 1. " INTID835  ,Interrupt ID835  Priority/Priority Byte Offset 835 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID834  ,Interrupt ID834   Priority/Priority Byte Offset 834 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID833  ,Interrupt ID833  Priority/Priority Byte Offset 833 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID832  ,Interrupt ID832   Priority/Priority Byte Offset 832 "
group.long 0x744++0x03
line.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209"
hexmask.long.byte 0x00 24.--31. 1. " INTID839  ,Interrupt ID839  Priority/Priority Byte Offset 839 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID838  ,Interrupt ID838   Priority/Priority Byte Offset 838 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID837  ,Interrupt ID837  Priority/Priority Byte Offset 837 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID836  ,Interrupt ID836   Priority/Priority Byte Offset 836 "
group.long 0x748++0x03
line.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210"
hexmask.long.byte 0x00 24.--31. 1. " INTID843  ,Interrupt ID843  Priority/Priority Byte Offset 843 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID842  ,Interrupt ID842   Priority/Priority Byte Offset 842 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID841  ,Interrupt ID841  Priority/Priority Byte Offset 841 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID840  ,Interrupt ID840   Priority/Priority Byte Offset 840 "
group.long 0x74C++0x03
line.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211"
hexmask.long.byte 0x00 24.--31. 1. " INTID847  ,Interrupt ID847  Priority/Priority Byte Offset 847 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID846  ,Interrupt ID846   Priority/Priority Byte Offset 846 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID845  ,Interrupt ID845  Priority/Priority Byte Offset 845 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID844  ,Interrupt ID844   Priority/Priority Byte Offset 844 "
group.long 0x750++0x03
line.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212"
hexmask.long.byte 0x00 24.--31. 1. " INTID851  ,Interrupt ID851  Priority/Priority Byte Offset 851 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID850  ,Interrupt ID850   Priority/Priority Byte Offset 850 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID849  ,Interrupt ID849  Priority/Priority Byte Offset 849 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID848  ,Interrupt ID848   Priority/Priority Byte Offset 848 "
group.long 0x754++0x03
line.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213"
hexmask.long.byte 0x00 24.--31. 1. " INTID855  ,Interrupt ID855  Priority/Priority Byte Offset 855 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID854  ,Interrupt ID854   Priority/Priority Byte Offset 854 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID853  ,Interrupt ID853  Priority/Priority Byte Offset 853 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID852  ,Interrupt ID852   Priority/Priority Byte Offset 852 "
group.long 0x758++0x03
line.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214"
hexmask.long.byte 0x00 24.--31. 1. " INTID859  ,Interrupt ID859  Priority/Priority Byte Offset 859 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID858  ,Interrupt ID858   Priority/Priority Byte Offset 858 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID857  ,Interrupt ID857  Priority/Priority Byte Offset 857 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID856  ,Interrupt ID856   Priority/Priority Byte Offset 856 "
group.long 0x75C++0x03
line.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215"
hexmask.long.byte 0x00 24.--31. 1. " INTID863  ,Interrupt ID863  Priority/Priority Byte Offset 863 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID862  ,Interrupt ID862   Priority/Priority Byte Offset 862 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID861  ,Interrupt ID861  Priority/Priority Byte Offset 861 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID860  ,Interrupt ID860   Priority/Priority Byte Offset 860 "
else
rgroup.long 0x740++0x03
line.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208"
rgroup.long 0x744++0x03
line.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209"
rgroup.long 0x748++0x03
line.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210"
rgroup.long 0x74C++0x03
line.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211"
rgroup.long 0x750++0x03
line.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212"
rgroup.long 0x754++0x03
line.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213"
rgroup.long 0x758++0x03
line.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214"
rgroup.long 0x75C++0x03
line.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)
group.long 0x760++0x03
line.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216"
hexmask.long.byte 0x00 24.--31. 1. " INTID867  ,Interrupt ID867  Priority/Priority Byte Offset 867 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID866  ,Interrupt ID866   Priority/Priority Byte Offset 866 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID865  ,Interrupt ID865  Priority/Priority Byte Offset 865 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID864  ,Interrupt ID864   Priority/Priority Byte Offset 864 "
group.long 0x764++0x03
line.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217"
hexmask.long.byte 0x00 24.--31. 1. " INTID871  ,Interrupt ID871  Priority/Priority Byte Offset 871 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID870  ,Interrupt ID870   Priority/Priority Byte Offset 870 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID869  ,Interrupt ID869  Priority/Priority Byte Offset 869 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID868  ,Interrupt ID868   Priority/Priority Byte Offset 868 "
group.long 0x768++0x03
line.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218"
hexmask.long.byte 0x00 24.--31. 1. " INTID875  ,Interrupt ID875  Priority/Priority Byte Offset 875 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID874  ,Interrupt ID874   Priority/Priority Byte Offset 874 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID873  ,Interrupt ID873  Priority/Priority Byte Offset 873 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID872  ,Interrupt ID872   Priority/Priority Byte Offset 872 "
group.long 0x76C++0x03
line.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219"
hexmask.long.byte 0x00 24.--31. 1. " INTID879  ,Interrupt ID879  Priority/Priority Byte Offset 879 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID878  ,Interrupt ID878   Priority/Priority Byte Offset 878 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID877  ,Interrupt ID877  Priority/Priority Byte Offset 877 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID876  ,Interrupt ID876   Priority/Priority Byte Offset 876 "
group.long 0x770++0x03
line.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220"
hexmask.long.byte 0x00 24.--31. 1. " INTID883  ,Interrupt ID883  Priority/Priority Byte Offset 883 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID882  ,Interrupt ID882   Priority/Priority Byte Offset 882 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID881  ,Interrupt ID881  Priority/Priority Byte Offset 881 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID880  ,Interrupt ID880   Priority/Priority Byte Offset 880 "
group.long 0x774++0x03
line.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221"
hexmask.long.byte 0x00 24.--31. 1. " INTID887  ,Interrupt ID887  Priority/Priority Byte Offset 887 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID886  ,Interrupt ID886   Priority/Priority Byte Offset 886 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID885  ,Interrupt ID885  Priority/Priority Byte Offset 885 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID884  ,Interrupt ID884   Priority/Priority Byte Offset 884 "
group.long 0x778++0x03
line.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222"
hexmask.long.byte 0x00 24.--31. 1. " INTID891  ,Interrupt ID891  Priority/Priority Byte Offset 891 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID890  ,Interrupt ID890   Priority/Priority Byte Offset 890 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID889  ,Interrupt ID889  Priority/Priority Byte Offset 889 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID888  ,Interrupt ID888   Priority/Priority Byte Offset 888 "
group.long 0x77C++0x03
line.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223"
hexmask.long.byte 0x00 24.--31. 1. " INTID895  ,Interrupt ID895  Priority/Priority Byte Offset 895 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID894  ,Interrupt ID894   Priority/Priority Byte Offset 894 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID893  ,Interrupt ID893  Priority/Priority Byte Offset 893 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID892  ,Interrupt ID892   Priority/Priority Byte Offset 892 "
else
rgroup.long 0x760++0x03
line.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216"
rgroup.long 0x764++0x03
line.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217"
rgroup.long 0x768++0x03
line.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218"
rgroup.long 0x76C++0x03
line.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219"
rgroup.long 0x770++0x03
line.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220"
rgroup.long 0x774++0x03
line.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221"
rgroup.long 0x778++0x03
line.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222"
rgroup.long 0x77C++0x03
line.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)
group.long 0x780++0x03
line.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224"
hexmask.long.byte 0x00 24.--31. 1. " INTID899  ,Interrupt ID899  Priority/Priority Byte Offset 899 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID898  ,Interrupt ID898   Priority/Priority Byte Offset 898 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID897  ,Interrupt ID897  Priority/Priority Byte Offset 897 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID896  ,Interrupt ID896   Priority/Priority Byte Offset 896 "
group.long 0x784++0x03
line.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225"
hexmask.long.byte 0x00 24.--31. 1. " INTID903  ,Interrupt ID903  Priority/Priority Byte Offset 903 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID902  ,Interrupt ID902   Priority/Priority Byte Offset 902 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID901  ,Interrupt ID901  Priority/Priority Byte Offset 901 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID900  ,Interrupt ID900   Priority/Priority Byte Offset 900 "
group.long 0x788++0x03
line.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226"
hexmask.long.byte 0x00 24.--31. 1. " INTID907  ,Interrupt ID907  Priority/Priority Byte Offset 907 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID906  ,Interrupt ID906   Priority/Priority Byte Offset 906 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID905  ,Interrupt ID905  Priority/Priority Byte Offset 905 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID904  ,Interrupt ID904   Priority/Priority Byte Offset 904 "
group.long 0x78C++0x03
line.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227"
hexmask.long.byte 0x00 24.--31. 1. " INTID911  ,Interrupt ID911  Priority/Priority Byte Offset 911 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID910  ,Interrupt ID910   Priority/Priority Byte Offset 910 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID909  ,Interrupt ID909  Priority/Priority Byte Offset 909 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID908  ,Interrupt ID908   Priority/Priority Byte Offset 908 "
group.long 0x790++0x03
line.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228"
hexmask.long.byte 0x00 24.--31. 1. " INTID915  ,Interrupt ID915  Priority/Priority Byte Offset 915 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID914  ,Interrupt ID914   Priority/Priority Byte Offset 914 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID913  ,Interrupt ID913  Priority/Priority Byte Offset 913 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID912  ,Interrupt ID912   Priority/Priority Byte Offset 912 "
group.long 0x794++0x03
line.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229"
hexmask.long.byte 0x00 24.--31. 1. " INTID919  ,Interrupt ID919  Priority/Priority Byte Offset 919 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID918  ,Interrupt ID918   Priority/Priority Byte Offset 918 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID917  ,Interrupt ID917  Priority/Priority Byte Offset 917 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID916  ,Interrupt ID916   Priority/Priority Byte Offset 916 "
group.long 0x798++0x03
line.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230"
hexmask.long.byte 0x00 24.--31. 1. " INTID923  ,Interrupt ID923  Priority/Priority Byte Offset 923 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID922  ,Interrupt ID922   Priority/Priority Byte Offset 922 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID921  ,Interrupt ID921  Priority/Priority Byte Offset 921 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID920  ,Interrupt ID920   Priority/Priority Byte Offset 920 "
group.long 0x79C++0x03
line.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231"
hexmask.long.byte 0x00 24.--31. 1. " INTID927  ,Interrupt ID927  Priority/Priority Byte Offset 927 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID926  ,Interrupt ID926   Priority/Priority Byte Offset 926 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID925  ,Interrupt ID925  Priority/Priority Byte Offset 925 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID924  ,Interrupt ID924   Priority/Priority Byte Offset 924 "
else
rgroup.long 0x780++0x03
line.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224"
rgroup.long 0x784++0x03
line.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225"
rgroup.long 0x788++0x03
line.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226"
rgroup.long 0x78C++0x03
line.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227"
rgroup.long 0x790++0x03
line.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228"
rgroup.long 0x794++0x03
line.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229"
rgroup.long 0x798++0x03
line.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230"
rgroup.long 0x79C++0x03
line.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)
group.long 0x7A0++0x03
line.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232"
hexmask.long.byte 0x00 24.--31. 1. " INTID931  ,Interrupt ID931  Priority/Priority Byte Offset 931 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID930  ,Interrupt ID930   Priority/Priority Byte Offset 930 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID929  ,Interrupt ID929  Priority/Priority Byte Offset 929 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID928  ,Interrupt ID928   Priority/Priority Byte Offset 928 "
group.long 0x7A4++0x03
line.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233"
hexmask.long.byte 0x00 24.--31. 1. " INTID935  ,Interrupt ID935  Priority/Priority Byte Offset 935 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID934  ,Interrupt ID934   Priority/Priority Byte Offset 934 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID933  ,Interrupt ID933  Priority/Priority Byte Offset 933 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID932  ,Interrupt ID932   Priority/Priority Byte Offset 932 "
group.long 0x7A8++0x03
line.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234"
hexmask.long.byte 0x00 24.--31. 1. " INTID939  ,Interrupt ID939  Priority/Priority Byte Offset 939 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID938  ,Interrupt ID938   Priority/Priority Byte Offset 938 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID937  ,Interrupt ID937  Priority/Priority Byte Offset 937 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID936  ,Interrupt ID936   Priority/Priority Byte Offset 936 "
group.long 0x7AC++0x03
line.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235"
hexmask.long.byte 0x00 24.--31. 1. " INTID943  ,Interrupt ID943  Priority/Priority Byte Offset 943 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID942  ,Interrupt ID942   Priority/Priority Byte Offset 942 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID941  ,Interrupt ID941  Priority/Priority Byte Offset 941 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID940  ,Interrupt ID940   Priority/Priority Byte Offset 940 "
group.long 0x7B0++0x03
line.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236"
hexmask.long.byte 0x00 24.--31. 1. " INTID947  ,Interrupt ID947  Priority/Priority Byte Offset 947 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID946  ,Interrupt ID946   Priority/Priority Byte Offset 946 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID945  ,Interrupt ID945  Priority/Priority Byte Offset 945 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID944  ,Interrupt ID944   Priority/Priority Byte Offset 944 "
group.long 0x7B4++0x03
line.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237"
hexmask.long.byte 0x00 24.--31. 1. " INTID951  ,Interrupt ID951  Priority/Priority Byte Offset 951 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID950  ,Interrupt ID950   Priority/Priority Byte Offset 950 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID949  ,Interrupt ID949  Priority/Priority Byte Offset 949 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID948  ,Interrupt ID948   Priority/Priority Byte Offset 948 "
group.long 0x7B8++0x03
line.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238"
hexmask.long.byte 0x00 24.--31. 1. " INTID955  ,Interrupt ID955  Priority/Priority Byte Offset 955 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID954  ,Interrupt ID954   Priority/Priority Byte Offset 954 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID953  ,Interrupt ID953  Priority/Priority Byte Offset 953 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID952  ,Interrupt ID952   Priority/Priority Byte Offset 952 "
group.long 0x7BC++0x03
line.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239"
hexmask.long.byte 0x00 24.--31. 1. " INTID959  ,Interrupt ID959  Priority/Priority Byte Offset 959 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID958  ,Interrupt ID958   Priority/Priority Byte Offset 958 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID957  ,Interrupt ID957  Priority/Priority Byte Offset 957 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID956  ,Interrupt ID956   Priority/Priority Byte Offset 956 "
else
rgroup.long 0x7A0++0x03
line.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232"
rgroup.long 0x7A4++0x03
line.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233"
rgroup.long 0x7A8++0x03
line.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234"
rgroup.long 0x7AC++0x03
line.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235"
rgroup.long 0x7B0++0x03
line.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236"
rgroup.long 0x7B4++0x03
line.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237"
rgroup.long 0x7B8++0x03
line.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238"
rgroup.long 0x7BC++0x03
line.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)
group.long 0x7C0++0x03
line.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240"
hexmask.long.byte 0x00 24.--31. 1. " INTID963  ,Interrupt ID963  Priority/Priority Byte Offset 963 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID962  ,Interrupt ID962   Priority/Priority Byte Offset 962 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID961  ,Interrupt ID961  Priority/Priority Byte Offset 961 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID960  ,Interrupt ID960   Priority/Priority Byte Offset 960 "
group.long 0x7C4++0x03
line.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241"
hexmask.long.byte 0x00 24.--31. 1. " INTID967  ,Interrupt ID967  Priority/Priority Byte Offset 967 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID966  ,Interrupt ID966   Priority/Priority Byte Offset 966 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID965  ,Interrupt ID965  Priority/Priority Byte Offset 965 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID964  ,Interrupt ID964   Priority/Priority Byte Offset 964 "
group.long 0x7C8++0x03
line.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242"
hexmask.long.byte 0x00 24.--31. 1. " INTID971  ,Interrupt ID971  Priority/Priority Byte Offset 971 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID970  ,Interrupt ID970   Priority/Priority Byte Offset 970 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID969  ,Interrupt ID969  Priority/Priority Byte Offset 969 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID968  ,Interrupt ID968   Priority/Priority Byte Offset 968 "
group.long 0x7CC++0x03
line.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243"
hexmask.long.byte 0x00 24.--31. 1. " INTID975  ,Interrupt ID975  Priority/Priority Byte Offset 975 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID974  ,Interrupt ID974   Priority/Priority Byte Offset 974 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID973  ,Interrupt ID973  Priority/Priority Byte Offset 973 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID972  ,Interrupt ID972   Priority/Priority Byte Offset 972 "
group.long 0x7D0++0x03
line.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244"
hexmask.long.byte 0x00 24.--31. 1. " INTID979  ,Interrupt ID979  Priority/Priority Byte Offset 979 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID978  ,Interrupt ID978   Priority/Priority Byte Offset 978 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID977  ,Interrupt ID977  Priority/Priority Byte Offset 977 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID976  ,Interrupt ID976   Priority/Priority Byte Offset 976 "
group.long 0x7D4++0x03
line.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245"
hexmask.long.byte 0x00 24.--31. 1. " INTID983  ,Interrupt ID983  Priority/Priority Byte Offset 983 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID982  ,Interrupt ID982   Priority/Priority Byte Offset 982 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID981  ,Interrupt ID981  Priority/Priority Byte Offset 981 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID980  ,Interrupt ID980   Priority/Priority Byte Offset 980 "
group.long 0x7D8++0x03
line.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246"
hexmask.long.byte 0x00 24.--31. 1. " INTID987  ,Interrupt ID987  Priority/Priority Byte Offset 987 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID986  ,Interrupt ID986   Priority/Priority Byte Offset 986 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID985  ,Interrupt ID985  Priority/Priority Byte Offset 985 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID984  ,Interrupt ID984   Priority/Priority Byte Offset 984 "
group.long 0x7DC++0x03
line.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247"
hexmask.long.byte 0x00 24.--31. 1. " INTID991  ,Interrupt ID991  Priority/Priority Byte Offset 991 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID990  ,Interrupt ID990   Priority/Priority Byte Offset 990 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID989  ,Interrupt ID989  Priority/Priority Byte Offset 989 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID988  ,Interrupt ID988   Priority/Priority Byte Offset 988 "
else
rgroup.long 0x7C0++0x03
line.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240"
rgroup.long 0x7C4++0x03
line.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241"
rgroup.long 0x7C8++0x03
line.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242"
rgroup.long 0x7CC++0x03
line.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243"
rgroup.long 0x7D0++0x03
line.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244"
rgroup.long 0x7D4++0x03
line.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245"
rgroup.long 0x7D8++0x03
line.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246"
rgroup.long 0x7DC++0x03
line.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1F)
group.long 0x7E0++0x03
line.long 0x00 "GICD_IPRIORITYR248,Interrupt Priority Register 248"
hexmask.long.byte 0x00 24.--31. 1. " INTID995  ,Interrupt ID995  Priority/Priority Byte Offset 995 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID994  ,Interrupt ID994   Priority/Priority Byte Offset 994 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID993  ,Interrupt ID993  Priority/Priority Byte Offset 993 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID992  ,Interrupt ID992   Priority/Priority Byte Offset 992 "
group.long 0x7E4++0x03
line.long 0x00 "GICD_IPRIORITYR249,Interrupt Priority Register 249"
hexmask.long.byte 0x00 24.--31. 1. " INTID999  ,Interrupt ID999  Priority/Priority Byte Offset 999 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID998  ,Interrupt ID998   Priority/Priority Byte Offset 998 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID997  ,Interrupt ID997  Priority/Priority Byte Offset 997 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID996  ,Interrupt ID996   Priority/Priority Byte Offset 996 "
group.long 0x7E8++0x03
line.long 0x00 "GICD_IPRIORITYR250,Interrupt Priority Register 250"
hexmask.long.byte 0x00 24.--31. 1. " INTID1003 ,Interrupt ID1003 Priority/Priority Byte Offset 1003"
hexmask.long.byte 0x00 16.--23. 1. "  INTID1002 ,Interrupt ID1002  Priority/Priority Byte Offset 1002"
hexmask.long.byte 0x00 8.--15. 1. "  INTID1001 ,Interrupt ID1001 Priority/Priority Byte Offset 1001"
hexmask.long.byte 0x00 0.--7. 1. "  INTID1000 ,Interrupt ID1000  Priority/Priority Byte Offset 1000"
group.long 0x7EC++0x03
line.long 0x00 "GICD_IPRIORITYR251,Interrupt Priority Register 251"
hexmask.long.byte 0x00 24.--31. 1. " INTID1007 ,Interrupt ID1007 Priority/Priority Byte Offset 1007"
hexmask.long.byte 0x00 16.--23. 1. "  INTID1006 ,Interrupt ID1006  Priority/Priority Byte Offset 1006"
hexmask.long.byte 0x00 8.--15. 1. "  INTID1005 ,Interrupt ID1005 Priority/Priority Byte Offset 1005"
hexmask.long.byte 0x00 0.--7. 1. "  INTID1004 ,Interrupt ID1004  Priority/Priority Byte Offset 1004"
group.long 0x7F0++0x03
line.long 0x00 "GICD_IPRIORITYR252,Interrupt Priority Register 252"
hexmask.long.byte 0x00 24.--31. 1. " INTID1011 ,Interrupt ID1011 Priority/Priority Byte Offset 1011"
hexmask.long.byte 0x00 16.--23. 1. "  INTID1010 ,Interrupt ID1010  Priority/Priority Byte Offset 1010"
hexmask.long.byte 0x00 8.--15. 1. "  INTID1009 ,Interrupt ID1009 Priority/Priority Byte Offset 1009"
hexmask.long.byte 0x00 0.--7. 1. "  INTID1008 ,Interrupt ID1008  Priority/Priority Byte Offset 1008"
group.long 0x7F4++0x03
line.long 0x00 "GICD_IPRIORITYR253,Interrupt Priority Register 253"
hexmask.long.byte 0x00 24.--31. 1. " INTID1015 ,Interrupt ID1015 Priority/Priority Byte Offset 1015"
hexmask.long.byte 0x00 16.--23. 1. "  INTID1014 ,Interrupt ID1014  Priority/Priority Byte Offset 1014"
hexmask.long.byte 0x00 8.--15. 1. "  INTID1013 ,Interrupt ID1013 Priority/Priority Byte Offset 1013"
hexmask.long.byte 0x00 0.--7. 1. "  INTID1012 ,Interrupt ID1012  Priority/Priority Byte Offset 1012"
group.long 0x7F8++0x03
line.long 0x00 "GICD_IPRIORITYR254,Interrupt Priority Register 254"
hexmask.long.byte 0x00 24.--31. 1. " INTID1019 ,Interrupt ID1019 Priority/Priority Byte Offset 1019"
hexmask.long.byte 0x00 16.--23. 1. "  INTID1018 ,Interrupt ID1018  Priority/Priority Byte Offset 1018"
hexmask.long.byte 0x00 8.--15. 1. "  INTID1017 ,Interrupt ID1017 Priority/Priority Byte Offset 1017"
hexmask.long.byte 0x00 0.--7. 1. "  INTID1016 ,Interrupt ID1016  Priority/Priority Byte Offset 1016"
else
rgroup.long 0x7E0++0x03
line.long 0x00 "GICD_IPRIORITYR248,Interrupt Priority Register 248"
rgroup.long 0x7E4++0x03
line.long 0x00 "GICD_IPRIORITYR249,Interrupt Priority Register 249"
rgroup.long 0x7E8++0x03
line.long 0x00 "GICD_IPRIORITYR250,Interrupt Priority Register 250"
rgroup.long 0x7EC++0x03
line.long 0x00 "GICD_IPRIORITYR251,Interrupt Priority Register 251"
rgroup.long 0x7F0++0x03
line.long 0x00 "GICD_IPRIORITYR252,Interrupt Priority Register 252"
rgroup.long 0x7F4++0x03
line.long 0x00 "GICD_IPRIORITYR253,Interrupt Priority Register 253"
rgroup.long 0x7F8++0x03
line.long 0x00 "GICD_IPRIORITYR254,Interrupt Priority Register 254"
endif
tree.end
width 19.
tree "Processor Targets Registers"
if (((per.l(ad:0xFFFC1000+0x04))&0x000000E0)>0x1)
rgroup.long 0x800++0x03
line.long 0x00 "GICD_ITARGETSR0,Interrupt Processor Targets Register 0"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO3    ,CPU Targets Byte Offset 3   "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO2    ,CPU Targets Byte Offset 2   "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO1    ,CPU Targets Byte Offset 1   "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO0    ,CPU Targets Byte Offset 0   "
rgroup.long 0x804++0x03
line.long 0x00 "GICD_ITARGETSR1,Interrupt Processor Targets Register 1"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO7    ,CPU Targets Byte Offset 7   "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO6    ,CPU Targets Byte Offset 6   "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO5    ,CPU Targets Byte Offset 5   "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO4    ,CPU Targets Byte Offset 4   "
rgroup.long 0x808++0x03
line.long 0x00 "GICD_ITARGETSR2,Interrupt Processor Targets Register 2"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO11   ,CPU Targets Byte Offset 11  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO10   ,CPU Targets Byte Offset 10  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO9    ,CPU Targets Byte Offset 9   "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO8    ,CPU Targets Byte Offset 8   "
rgroup.long 0x80C++0x03
line.long 0x00 "GICD_ITARGETSR3,Interrupt Processor Targets Register 3"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO15   ,CPU Targets Byte Offset 15  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO14   ,CPU Targets Byte Offset 14  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO13   ,CPU Targets Byte Offset 13  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO12   ,CPU Targets Byte Offset 12  "
rgroup.long 0x810++0x03
line.long 0x00 "GICD_ITARGETSR4,Interrupt Processor Targets Register 4"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO19   ,CPU Targets Byte Offset 19  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO18   ,CPU Targets Byte Offset 18  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO17   ,CPU Targets Byte Offset 17  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO16   ,CPU Targets Byte Offset 16  "
rgroup.long 0x814++0x03
line.long 0x00 "GICD_ITARGETSR5,Interrupt Processor Targets Register 5"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO23   ,CPU Targets Byte Offset 23  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO22   ,CPU Targets Byte Offset 22  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO21   ,CPU Targets Byte Offset 21  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO20   ,CPU Targets Byte Offset 20  "
rgroup.long 0x818++0x03
line.long 0x00 "GICD_ITARGETSR6,Interrupt Processor Targets Register 6"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO27   ,CPU Targets Byte Offset 27  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO26   ,CPU Targets Byte Offset 26  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO25   ,CPU Targets Byte Offset 25  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO24   ,CPU Targets Byte Offset 24  "
rgroup.long 0x81C++0x03
line.long 0x00 "GICD_ITARGETSR7,Interrupt Processor Targets Register 7"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO31   ,CPU Targets Byte Offset 31  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO30   ,CPU Targets Byte Offset 30  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO29   ,CPU Targets Byte Offset 29  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO28   ,CPU Targets Byte Offset 28  "
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)
group.long 0x820++0x03
line.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO35   ,CPU Targets Byte Offset 35  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO34   ,CPU Targets Byte Offset 34  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO33   ,CPU Targets Byte Offset 33  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO32   ,CPU Targets Byte Offset 32  "
group.long 0x824++0x03
line.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO39   ,CPU Targets Byte Offset 39  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO38   ,CPU Targets Byte Offset 38  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO37   ,CPU Targets Byte Offset 37  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO36   ,CPU Targets Byte Offset 36  "
group.long 0x828++0x03
line.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO43   ,CPU Targets Byte Offset 43  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO42   ,CPU Targets Byte Offset 42  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO41   ,CPU Targets Byte Offset 41  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO40   ,CPU Targets Byte Offset 40  "
group.long 0x82C++0x03
line.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO47   ,CPU Targets Byte Offset 47  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO46   ,CPU Targets Byte Offset 46  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO45   ,CPU Targets Byte Offset 45  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO44   ,CPU Targets Byte Offset 44  "
group.long 0x830++0x03
line.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO51   ,CPU Targets Byte Offset 51  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO50   ,CPU Targets Byte Offset 50  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO49   ,CPU Targets Byte Offset 49  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO48   ,CPU Targets Byte Offset 48  "
group.long 0x834++0x03
line.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO55   ,CPU Targets Byte Offset 55  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO54   ,CPU Targets Byte Offset 54  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO53   ,CPU Targets Byte Offset 53  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO52   ,CPU Targets Byte Offset 52  "
group.long 0x838++0x03
line.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO59   ,CPU Targets Byte Offset 59  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO58   ,CPU Targets Byte Offset 58  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO57   ,CPU Targets Byte Offset 57  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO56   ,CPU Targets Byte Offset 56  "
group.long 0x83C++0x03
line.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO63   ,CPU Targets Byte Offset 63  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO62   ,CPU Targets Byte Offset 62  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO61   ,CPU Targets Byte Offset 61  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO60   ,CPU Targets Byte Offset 60  "
else
rgroup.long 0x820++0x03
line.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8"
rgroup.long 0x824++0x03
line.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9"
rgroup.long 0x828++0x03
line.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10"
rgroup.long 0x82C++0x03
line.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11"
rgroup.long 0x830++0x03
line.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12"
rgroup.long 0x834++0x03
line.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13"
rgroup.long 0x838++0x03
line.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14"
rgroup.long 0x83C++0x03
line.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)
group.long 0x840++0x03
line.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO67   ,CPU Targets Byte Offset 67  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO66   ,CPU Targets Byte Offset 66  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO65   ,CPU Targets Byte Offset 65  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO64   ,CPU Targets Byte Offset 64  "
group.long 0x844++0x03
line.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO71   ,CPU Targets Byte Offset 71  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO70   ,CPU Targets Byte Offset 70  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO69   ,CPU Targets Byte Offset 69  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO68   ,CPU Targets Byte Offset 68  "
group.long 0x848++0x03
line.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO75   ,CPU Targets Byte Offset 75  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO74   ,CPU Targets Byte Offset 74  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO73   ,CPU Targets Byte Offset 73  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO72   ,CPU Targets Byte Offset 72  "
group.long 0x84C++0x03
line.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO79   ,CPU Targets Byte Offset 79  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO78   ,CPU Targets Byte Offset 78  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO77   ,CPU Targets Byte Offset 77  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO76   ,CPU Targets Byte Offset 76  "
group.long 0x850++0x03
line.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO83   ,CPU Targets Byte Offset 83  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO82   ,CPU Targets Byte Offset 82  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO81   ,CPU Targets Byte Offset 81  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO80   ,CPU Targets Byte Offset 80  "
group.long 0x854++0x03
line.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO87   ,CPU Targets Byte Offset 87  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO86   ,CPU Targets Byte Offset 86  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO85   ,CPU Targets Byte Offset 85  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO84   ,CPU Targets Byte Offset 84  "
group.long 0x858++0x03
line.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO91   ,CPU Targets Byte Offset 91  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO90   ,CPU Targets Byte Offset 90  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO89   ,CPU Targets Byte Offset 89  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO88   ,CPU Targets Byte Offset 88  "
group.long 0x85C++0x03
line.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO95   ,CPU Targets Byte Offset 95  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO94   ,CPU Targets Byte Offset 94  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO93   ,CPU Targets Byte Offset 93  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO92   ,CPU Targets Byte Offset 92  "
else
rgroup.long 0x840++0x03
line.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16"
rgroup.long 0x844++0x03
line.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17"
rgroup.long 0x848++0x03
line.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18"
rgroup.long 0x84C++0x03
line.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19"
rgroup.long 0x850++0x03
line.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20"
rgroup.long 0x854++0x03
line.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21"
rgroup.long 0x858++0x03
line.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22"
rgroup.long 0x85C++0x03
line.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)
group.long 0x860++0x03
line.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO99   ,CPU Targets Byte Offset 99  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO98   ,CPU Targets Byte Offset 98  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO97   ,CPU Targets Byte Offset 97  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO96   ,CPU Targets Byte Offset 96  "
group.long 0x864++0x03
line.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO103  ,CPU Targets Byte Offset 103 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO102  ,CPU Targets Byte Offset 102 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO101  ,CPU Targets Byte Offset 101 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO100  ,CPU Targets Byte Offset 100 "
group.long 0x868++0x03
line.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO107  ,CPU Targets Byte Offset 107 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO106  ,CPU Targets Byte Offset 106 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO105  ,CPU Targets Byte Offset 105 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO104  ,CPU Targets Byte Offset 104 "
group.long 0x86C++0x03
line.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO111  ,CPU Targets Byte Offset 111 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO110  ,CPU Targets Byte Offset 110 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO109  ,CPU Targets Byte Offset 109 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO108  ,CPU Targets Byte Offset 108 "
group.long 0x870++0x03
line.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO115  ,CPU Targets Byte Offset 115 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO114  ,CPU Targets Byte Offset 114 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO113  ,CPU Targets Byte Offset 113 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO112  ,CPU Targets Byte Offset 112 "
group.long 0x874++0x03
line.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO119  ,CPU Targets Byte Offset 119 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO118  ,CPU Targets Byte Offset 118 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO117  ,CPU Targets Byte Offset 117 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO116  ,CPU Targets Byte Offset 116 "
group.long 0x878++0x03
line.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO123  ,CPU Targets Byte Offset 123 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO122  ,CPU Targets Byte Offset 122 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO121  ,CPU Targets Byte Offset 121 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO120  ,CPU Targets Byte Offset 120 "
group.long 0x87C++0x03
line.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO127  ,CPU Targets Byte Offset 127 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO126  ,CPU Targets Byte Offset 126 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO125  ,CPU Targets Byte Offset 125 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO124  ,CPU Targets Byte Offset 124 "
else
rgroup.long 0x860++0x03
line.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24"
rgroup.long 0x864++0x03
line.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25"
rgroup.long 0x868++0x03
line.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26"
rgroup.long 0x86C++0x03
line.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27"
rgroup.long 0x870++0x03
line.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28"
rgroup.long 0x874++0x03
line.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29"
rgroup.long 0x878++0x03
line.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30"
rgroup.long 0x87C++0x03
line.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)
group.long 0x880++0x03
line.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO131  ,CPU Targets Byte Offset 131 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO130  ,CPU Targets Byte Offset 130 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO129  ,CPU Targets Byte Offset 129 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO128  ,CPU Targets Byte Offset 128 "
group.long 0x884++0x03
line.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO135  ,CPU Targets Byte Offset 135 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO134  ,CPU Targets Byte Offset 134 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO133  ,CPU Targets Byte Offset 133 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO132  ,CPU Targets Byte Offset 132 "
group.long 0x888++0x03
line.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO139  ,CPU Targets Byte Offset 139 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO138  ,CPU Targets Byte Offset 138 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO137  ,CPU Targets Byte Offset 137 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO136  ,CPU Targets Byte Offset 136 "
group.long 0x88C++0x03
line.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO143  ,CPU Targets Byte Offset 143 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO142  ,CPU Targets Byte Offset 142 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO141  ,CPU Targets Byte Offset 141 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO140  ,CPU Targets Byte Offset 140 "
group.long 0x890++0x03
line.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO147  ,CPU Targets Byte Offset 147 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO146  ,CPU Targets Byte Offset 146 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO145  ,CPU Targets Byte Offset 145 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO144  ,CPU Targets Byte Offset 144 "
group.long 0x894++0x03
line.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO151  ,CPU Targets Byte Offset 151 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO150  ,CPU Targets Byte Offset 150 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO149  ,CPU Targets Byte Offset 149 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO148  ,CPU Targets Byte Offset 148 "
group.long 0x898++0x03
line.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO155  ,CPU Targets Byte Offset 155 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO154  ,CPU Targets Byte Offset 154 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO153  ,CPU Targets Byte Offset 153 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO152  ,CPU Targets Byte Offset 152 "
group.long 0x89C++0x03
line.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO159  ,CPU Targets Byte Offset 159 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO158  ,CPU Targets Byte Offset 158 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO157  ,CPU Targets Byte Offset 157 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO156  ,CPU Targets Byte Offset 156 "
else
rgroup.long 0x880++0x03
line.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32"
rgroup.long 0x884++0x03
line.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33"
rgroup.long 0x888++0x03
line.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34"
rgroup.long 0x88C++0x03
line.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35"
rgroup.long 0x890++0x03
line.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36"
rgroup.long 0x894++0x03
line.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37"
rgroup.long 0x898++0x03
line.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38"
rgroup.long 0x89C++0x03
line.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)
group.long 0x8A0++0x03
line.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO163  ,CPU Targets Byte Offset 163 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO162  ,CPU Targets Byte Offset 162 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO161  ,CPU Targets Byte Offset 161 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO160  ,CPU Targets Byte Offset 160 "
group.long 0x8A4++0x03
line.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO167  ,CPU Targets Byte Offset 167 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO166  ,CPU Targets Byte Offset 166 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO165  ,CPU Targets Byte Offset 165 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO164  ,CPU Targets Byte Offset 164 "
group.long 0x8A8++0x03
line.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO171  ,CPU Targets Byte Offset 171 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO170  ,CPU Targets Byte Offset 170 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO169  ,CPU Targets Byte Offset 169 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO168  ,CPU Targets Byte Offset 168 "
group.long 0x8AC++0x03
line.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO175  ,CPU Targets Byte Offset 175 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO174  ,CPU Targets Byte Offset 174 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO173  ,CPU Targets Byte Offset 173 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO172  ,CPU Targets Byte Offset 172 "
group.long 0x8B0++0x03
line.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO179  ,CPU Targets Byte Offset 179 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO178  ,CPU Targets Byte Offset 178 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO177  ,CPU Targets Byte Offset 177 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO176  ,CPU Targets Byte Offset 176 "
group.long 0x8B4++0x03
line.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO183  ,CPU Targets Byte Offset 183 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO182  ,CPU Targets Byte Offset 182 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO181  ,CPU Targets Byte Offset 181 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO180  ,CPU Targets Byte Offset 180 "
group.long 0x8B8++0x03
line.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO187  ,CPU Targets Byte Offset 187 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO186  ,CPU Targets Byte Offset 186 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO185  ,CPU Targets Byte Offset 185 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO184  ,CPU Targets Byte Offset 184 "
group.long 0x8BC++0x03
line.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO191  ,CPU Targets Byte Offset 191 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO190  ,CPU Targets Byte Offset 190 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO189  ,CPU Targets Byte Offset 189 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO188  ,CPU Targets Byte Offset 188 "
else
rgroup.long 0x8A0++0x03
line.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40"
rgroup.long 0x8A4++0x03
line.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41"
rgroup.long 0x8A8++0x03
line.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42"
rgroup.long 0x8AC++0x03
line.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43"
rgroup.long 0x8B0++0x03
line.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44"
rgroup.long 0x8B4++0x03
line.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45"
rgroup.long 0x8B8++0x03
line.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46"
rgroup.long 0x8BC++0x03
line.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)
group.long 0x8C0++0x03
line.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO195  ,CPU Targets Byte Offset 195 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO194  ,CPU Targets Byte Offset 194 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO193  ,CPU Targets Byte Offset 193 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO192  ,CPU Targets Byte Offset 192 "
group.long 0x8C4++0x03
line.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO199  ,CPU Targets Byte Offset 199 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO198  ,CPU Targets Byte Offset 198 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO197  ,CPU Targets Byte Offset 197 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO196  ,CPU Targets Byte Offset 196 "
group.long 0x8C8++0x03
line.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO203  ,CPU Targets Byte Offset 203 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO202  ,CPU Targets Byte Offset 202 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO201  ,CPU Targets Byte Offset 201 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO200  ,CPU Targets Byte Offset 200 "
group.long 0x8CC++0x03
line.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO207  ,CPU Targets Byte Offset 207 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO206  ,CPU Targets Byte Offset 206 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO205  ,CPU Targets Byte Offset 205 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO204  ,CPU Targets Byte Offset 204 "
group.long 0x8D0++0x03
line.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO211  ,CPU Targets Byte Offset 211 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO210  ,CPU Targets Byte Offset 210 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO209  ,CPU Targets Byte Offset 209 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO208  ,CPU Targets Byte Offset 208 "
group.long 0x8D4++0x03
line.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO215  ,CPU Targets Byte Offset 215 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO214  ,CPU Targets Byte Offset 214 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO213  ,CPU Targets Byte Offset 213 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO212  ,CPU Targets Byte Offset 212 "
group.long 0x8D8++0x03
line.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO219  ,CPU Targets Byte Offset 219 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO218  ,CPU Targets Byte Offset 218 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO217  ,CPU Targets Byte Offset 217 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO216  ,CPU Targets Byte Offset 216 "
group.long 0x8DC++0x03
line.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO223  ,CPU Targets Byte Offset 223 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO222  ,CPU Targets Byte Offset 222 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO221  ,CPU Targets Byte Offset 221 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO220  ,CPU Targets Byte Offset 220 "
else
rgroup.long 0x8C0++0x03
line.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48"
rgroup.long 0x8C4++0x03
line.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49"
rgroup.long 0x8C8++0x03
line.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50"
rgroup.long 0x8CC++0x03
line.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51"
rgroup.long 0x8D0++0x03
line.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52"
rgroup.long 0x8D4++0x03
line.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53"
rgroup.long 0x8D8++0x03
line.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54"
rgroup.long 0x8DC++0x03
line.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)
group.long 0x8E0++0x03
line.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO227  ,CPU Targets Byte Offset 227 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO226  ,CPU Targets Byte Offset 226 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO225  ,CPU Targets Byte Offset 225 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO224  ,CPU Targets Byte Offset 224 "
group.long 0x8E4++0x03
line.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO231  ,CPU Targets Byte Offset 231 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO230  ,CPU Targets Byte Offset 230 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO229  ,CPU Targets Byte Offset 229 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO228  ,CPU Targets Byte Offset 228 "
group.long 0x8E8++0x03
line.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO235  ,CPU Targets Byte Offset 235 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO234  ,CPU Targets Byte Offset 234 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO233  ,CPU Targets Byte Offset 233 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO232  ,CPU Targets Byte Offset 232 "
group.long 0x8EC++0x03
line.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO239  ,CPU Targets Byte Offset 239 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO238  ,CPU Targets Byte Offset 238 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO237  ,CPU Targets Byte Offset 237 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO236  ,CPU Targets Byte Offset 236 "
group.long 0x8F0++0x03
line.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO243  ,CPU Targets Byte Offset 243 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO242  ,CPU Targets Byte Offset 242 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO241  ,CPU Targets Byte Offset 241 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO240  ,CPU Targets Byte Offset 240 "
group.long 0x8F4++0x03
line.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO247  ,CPU Targets Byte Offset 247 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO246  ,CPU Targets Byte Offset 246 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO245  ,CPU Targets Byte Offset 245 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO244  ,CPU Targets Byte Offset 244 "
group.long 0x8F8++0x03
line.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO251  ,CPU Targets Byte Offset 251 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO250  ,CPU Targets Byte Offset 250 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO249  ,CPU Targets Byte Offset 249 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO248  ,CPU Targets Byte Offset 248 "
group.long 0x8FC++0x03
line.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO255  ,CPU Targets Byte Offset 255 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO254  ,CPU Targets Byte Offset 254 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO253  ,CPU Targets Byte Offset 253 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO252  ,CPU Targets Byte Offset 252 "
else
rgroup.long 0x8E0++0x03
line.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56"
rgroup.long 0x8E4++0x03
line.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57"
rgroup.long 0x8E8++0x03
line.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58"
rgroup.long 0x8EC++0x03
line.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59"
rgroup.long 0x8F0++0x03
line.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60"
rgroup.long 0x8F4++0x03
line.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61"
rgroup.long 0x8F8++0x03
line.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62"
rgroup.long 0x8FC++0x03
line.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)
group.long 0x900++0x03
line.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO259  ,CPU Targets Byte Offset 259 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO258  ,CPU Targets Byte Offset 258 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO257  ,CPU Targets Byte Offset 257 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO256  ,CPU Targets Byte Offset 256 "
group.long 0x904++0x03
line.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO263  ,CPU Targets Byte Offset 263 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO262  ,CPU Targets Byte Offset 262 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO261  ,CPU Targets Byte Offset 261 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO260  ,CPU Targets Byte Offset 260 "
group.long 0x908++0x03
line.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO267  ,CPU Targets Byte Offset 267 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO266  ,CPU Targets Byte Offset 266 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO265  ,CPU Targets Byte Offset 265 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO264  ,CPU Targets Byte Offset 264 "
group.long 0x90C++0x03
line.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO271  ,CPU Targets Byte Offset 271 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO270  ,CPU Targets Byte Offset 270 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO269  ,CPU Targets Byte Offset 269 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO268  ,CPU Targets Byte Offset 268 "
group.long 0x910++0x03
line.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO275  ,CPU Targets Byte Offset 275 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO274  ,CPU Targets Byte Offset 274 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO273  ,CPU Targets Byte Offset 273 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO272  ,CPU Targets Byte Offset 272 "
group.long 0x914++0x03
line.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO279  ,CPU Targets Byte Offset 279 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO278  ,CPU Targets Byte Offset 278 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO277  ,CPU Targets Byte Offset 277 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO276  ,CPU Targets Byte Offset 276 "
group.long 0x918++0x03
line.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO283  ,CPU Targets Byte Offset 283 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO282  ,CPU Targets Byte Offset 282 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO281  ,CPU Targets Byte Offset 281 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO280  ,CPU Targets Byte Offset 280 "
group.long 0x91C++0x03
line.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO287  ,CPU Targets Byte Offset 287 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO286  ,CPU Targets Byte Offset 286 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO285  ,CPU Targets Byte Offset 285 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO284  ,CPU Targets Byte Offset 284 "
else
rgroup.long 0x900++0x03
line.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64"
rgroup.long 0x904++0x03
line.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65"
rgroup.long 0x908++0x03
line.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66"
rgroup.long 0x90C++0x03
line.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67"
rgroup.long 0x910++0x03
line.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68"
rgroup.long 0x914++0x03
line.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69"
rgroup.long 0x918++0x03
line.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70"
rgroup.long 0x91C++0x03
line.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)
group.long 0x920++0x03
line.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO291  ,CPU Targets Byte Offset 291 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO290  ,CPU Targets Byte Offset 290 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO289  ,CPU Targets Byte Offset 289 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO288  ,CPU Targets Byte Offset 288 "
group.long 0x924++0x03
line.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO295  ,CPU Targets Byte Offset 295 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO294  ,CPU Targets Byte Offset 294 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO293  ,CPU Targets Byte Offset 293 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO292  ,CPU Targets Byte Offset 292 "
group.long 0x928++0x03
line.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO299  ,CPU Targets Byte Offset 299 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO298  ,CPU Targets Byte Offset 298 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO297  ,CPU Targets Byte Offset 297 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO296  ,CPU Targets Byte Offset 296 "
group.long 0x92C++0x03
line.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO303  ,CPU Targets Byte Offset 303 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO302  ,CPU Targets Byte Offset 302 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO301  ,CPU Targets Byte Offset 301 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO300  ,CPU Targets Byte Offset 300 "
group.long 0x930++0x03
line.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO307  ,CPU Targets Byte Offset 307 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO306  ,CPU Targets Byte Offset 306 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO305  ,CPU Targets Byte Offset 305 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO304  ,CPU Targets Byte Offset 304 "
group.long 0x934++0x03
line.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO311  ,CPU Targets Byte Offset 311 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO310  ,CPU Targets Byte Offset 310 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO309  ,CPU Targets Byte Offset 309 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO308  ,CPU Targets Byte Offset 308 "
group.long 0x938++0x03
line.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO315  ,CPU Targets Byte Offset 315 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO314  ,CPU Targets Byte Offset 314 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO313  ,CPU Targets Byte Offset 313 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO312  ,CPU Targets Byte Offset 312 "
group.long 0x93C++0x03
line.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO319  ,CPU Targets Byte Offset 319 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO318  ,CPU Targets Byte Offset 318 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO317  ,CPU Targets Byte Offset 317 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO316  ,CPU Targets Byte Offset 316 "
else
rgroup.long 0x920++0x03
line.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72"
rgroup.long 0x924++0x03
line.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73"
rgroup.long 0x928++0x03
line.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74"
rgroup.long 0x92C++0x03
line.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75"
rgroup.long 0x930++0x03
line.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76"
rgroup.long 0x934++0x03
line.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77"
rgroup.long 0x938++0x03
line.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78"
rgroup.long 0x93C++0x03
line.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)
group.long 0x940++0x03
line.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO323  ,CPU Targets Byte Offset 323 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO322  ,CPU Targets Byte Offset 322 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO321  ,CPU Targets Byte Offset 321 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO320  ,CPU Targets Byte Offset 320 "
group.long 0x944++0x03
line.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO327  ,CPU Targets Byte Offset 327 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO326  ,CPU Targets Byte Offset 326 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO325  ,CPU Targets Byte Offset 325 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO324  ,CPU Targets Byte Offset 324 "
group.long 0x948++0x03
line.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO331  ,CPU Targets Byte Offset 331 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO330  ,CPU Targets Byte Offset 330 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO329  ,CPU Targets Byte Offset 329 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO328  ,CPU Targets Byte Offset 328 "
group.long 0x94C++0x03
line.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO335  ,CPU Targets Byte Offset 335 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO334  ,CPU Targets Byte Offset 334 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO333  ,CPU Targets Byte Offset 333 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO332  ,CPU Targets Byte Offset 332 "
group.long 0x950++0x03
line.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO339  ,CPU Targets Byte Offset 339 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO338  ,CPU Targets Byte Offset 338 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO337  ,CPU Targets Byte Offset 337 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO336  ,CPU Targets Byte Offset 336 "
group.long 0x954++0x03
line.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO343  ,CPU Targets Byte Offset 343 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO342  ,CPU Targets Byte Offset 342 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO341  ,CPU Targets Byte Offset 341 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO340  ,CPU Targets Byte Offset 340 "
group.long 0x958++0x03
line.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO347  ,CPU Targets Byte Offset 347 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO346  ,CPU Targets Byte Offset 346 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO345  ,CPU Targets Byte Offset 345 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO344  ,CPU Targets Byte Offset 344 "
group.long 0x95C++0x03
line.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO351  ,CPU Targets Byte Offset 351 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO350  ,CPU Targets Byte Offset 350 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO349  ,CPU Targets Byte Offset 349 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO348  ,CPU Targets Byte Offset 348 "
else
rgroup.long 0x940++0x03
line.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80"
rgroup.long 0x944++0x03
line.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81"
rgroup.long 0x948++0x03
line.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82"
rgroup.long 0x94C++0x03
line.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83"
rgroup.long 0x950++0x03
line.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84"
rgroup.long 0x954++0x03
line.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85"
rgroup.long 0x958++0x03
line.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86"
rgroup.long 0x95C++0x03
line.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)
group.long 0x960++0x03
line.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO355  ,CPU Targets Byte Offset 355 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO354  ,CPU Targets Byte Offset 354 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO353  ,CPU Targets Byte Offset 353 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO352  ,CPU Targets Byte Offset 352 "
group.long 0x964++0x03
line.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO359  ,CPU Targets Byte Offset 359 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO358  ,CPU Targets Byte Offset 358 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO357  ,CPU Targets Byte Offset 357 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO356  ,CPU Targets Byte Offset 356 "
group.long 0x968++0x03
line.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO363  ,CPU Targets Byte Offset 363 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO362  ,CPU Targets Byte Offset 362 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO361  ,CPU Targets Byte Offset 361 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO360  ,CPU Targets Byte Offset 360 "
group.long 0x96C++0x03
line.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO367  ,CPU Targets Byte Offset 367 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO366  ,CPU Targets Byte Offset 366 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO365  ,CPU Targets Byte Offset 365 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO364  ,CPU Targets Byte Offset 364 "
group.long 0x970++0x03
line.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO371  ,CPU Targets Byte Offset 371 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO370  ,CPU Targets Byte Offset 370 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO369  ,CPU Targets Byte Offset 369 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO368  ,CPU Targets Byte Offset 368 "
group.long 0x974++0x03
line.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO375  ,CPU Targets Byte Offset 375 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO374  ,CPU Targets Byte Offset 374 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO373  ,CPU Targets Byte Offset 373 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO372  ,CPU Targets Byte Offset 372 "
group.long 0x978++0x03
line.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO379  ,CPU Targets Byte Offset 379 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO378  ,CPU Targets Byte Offset 378 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO377  ,CPU Targets Byte Offset 377 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO376  ,CPU Targets Byte Offset 376 "
group.long 0x97C++0x03
line.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO383  ,CPU Targets Byte Offset 383 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO382  ,CPU Targets Byte Offset 382 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO381  ,CPU Targets Byte Offset 381 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO380  ,CPU Targets Byte Offset 380 "
else
rgroup.long 0x960++0x03
line.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88"
rgroup.long 0x964++0x03
line.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89"
rgroup.long 0x968++0x03
line.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90"
rgroup.long 0x96C++0x03
line.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91"
rgroup.long 0x970++0x03
line.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92"
rgroup.long 0x974++0x03
line.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93"
rgroup.long 0x978++0x03
line.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94"
rgroup.long 0x97C++0x03
line.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)
group.long 0x980++0x03
line.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO387  ,CPU Targets Byte Offset 387 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO386  ,CPU Targets Byte Offset 386 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO385  ,CPU Targets Byte Offset 385 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO384  ,CPU Targets Byte Offset 384 "
group.long 0x984++0x03
line.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO391  ,CPU Targets Byte Offset 391 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO390  ,CPU Targets Byte Offset 390 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO389  ,CPU Targets Byte Offset 389 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO388  ,CPU Targets Byte Offset 388 "
group.long 0x988++0x03
line.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO395  ,CPU Targets Byte Offset 395 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO394  ,CPU Targets Byte Offset 394 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO393  ,CPU Targets Byte Offset 393 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO392  ,CPU Targets Byte Offset 392 "
group.long 0x98C++0x03
line.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO399  ,CPU Targets Byte Offset 399 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO398  ,CPU Targets Byte Offset 398 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO397  ,CPU Targets Byte Offset 397 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO396  ,CPU Targets Byte Offset 396 "
group.long 0x990++0x03
line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO403  ,CPU Targets Byte Offset 403 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO402  ,CPU Targets Byte Offset 402 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO401  ,CPU Targets Byte Offset 401 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO400  ,CPU Targets Byte Offset 400 "
group.long 0x994++0x03
line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO407  ,CPU Targets Byte Offset 407 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO406  ,CPU Targets Byte Offset 406 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO405  ,CPU Targets Byte Offset 405 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO404  ,CPU Targets Byte Offset 404 "
group.long 0x998++0x03
line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO411  ,CPU Targets Byte Offset 411 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO410  ,CPU Targets Byte Offset 410 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO409  ,CPU Targets Byte Offset 409 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO408  ,CPU Targets Byte Offset 408 "
group.long 0x99C++0x03
line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO415  ,CPU Targets Byte Offset 415 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO414  ,CPU Targets Byte Offset 414 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO413  ,CPU Targets Byte Offset 413 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO412  ,CPU Targets Byte Offset 412 "
else
rgroup.long 0x980++0x03
line.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96"
rgroup.long 0x984++0x03
line.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97"
rgroup.long 0x988++0x03
line.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98"
rgroup.long 0x98C++0x03
line.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99"
rgroup.long 0x990++0x03
line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100"
rgroup.long 0x994++0x03
line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101"
rgroup.long 0x998++0x03
line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102"
rgroup.long 0x99C++0x03
line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)
group.long 0x9A0++0x03
line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO419  ,CPU Targets Byte Offset 419 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO418  ,CPU Targets Byte Offset 418 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO417  ,CPU Targets Byte Offset 417 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO416  ,CPU Targets Byte Offset 416 "
group.long 0x9A4++0x03
line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO423  ,CPU Targets Byte Offset 423 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO422  ,CPU Targets Byte Offset 422 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO421  ,CPU Targets Byte Offset 421 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO420  ,CPU Targets Byte Offset 420 "
group.long 0x9A8++0x03
line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO427  ,CPU Targets Byte Offset 427 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO426  ,CPU Targets Byte Offset 426 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO425  ,CPU Targets Byte Offset 425 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO424  ,CPU Targets Byte Offset 424 "
group.long 0x9AC++0x03
line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO431  ,CPU Targets Byte Offset 431 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO430  ,CPU Targets Byte Offset 430 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO429  ,CPU Targets Byte Offset 429 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO428  ,CPU Targets Byte Offset 428 "
group.long 0x9B0++0x03
line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO435  ,CPU Targets Byte Offset 435 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO434  ,CPU Targets Byte Offset 434 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO433  ,CPU Targets Byte Offset 433 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO432  ,CPU Targets Byte Offset 432 "
group.long 0x9B4++0x03
line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO439  ,CPU Targets Byte Offset 439 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO438  ,CPU Targets Byte Offset 438 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO437  ,CPU Targets Byte Offset 437 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO436  ,CPU Targets Byte Offset 436 "
group.long 0x9B8++0x03
line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO443  ,CPU Targets Byte Offset 443 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO442  ,CPU Targets Byte Offset 442 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO441  ,CPU Targets Byte Offset 441 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO440  ,CPU Targets Byte Offset 440 "
group.long 0x9BC++0x03
line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO447  ,CPU Targets Byte Offset 447 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO446  ,CPU Targets Byte Offset 446 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO445  ,CPU Targets Byte Offset 445 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO444  ,CPU Targets Byte Offset 444 "
else
rgroup.long 0x9A0++0x03
line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104"
rgroup.long 0x9A4++0x03
line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105"
rgroup.long 0x9A8++0x03
line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106"
rgroup.long 0x9AC++0x03
line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107"
rgroup.long 0x9B0++0x03
line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108"
rgroup.long 0x9B4++0x03
line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109"
rgroup.long 0x9B8++0x03
line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110"
rgroup.long 0x9BC++0x03
line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)
group.long 0x9C0++0x03
line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO451  ,CPU Targets Byte Offset 451 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO450  ,CPU Targets Byte Offset 450 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO449  ,CPU Targets Byte Offset 449 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO448  ,CPU Targets Byte Offset 448 "
group.long 0x9C4++0x03
line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO455  ,CPU Targets Byte Offset 455 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO454  ,CPU Targets Byte Offset 454 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO453  ,CPU Targets Byte Offset 453 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO452  ,CPU Targets Byte Offset 452 "
group.long 0x9C8++0x03
line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO459  ,CPU Targets Byte Offset 459 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO458  ,CPU Targets Byte Offset 458 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO457  ,CPU Targets Byte Offset 457 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO456  ,CPU Targets Byte Offset 456 "
group.long 0x9CC++0x03
line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO463  ,CPU Targets Byte Offset 463 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO462  ,CPU Targets Byte Offset 462 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO461  ,CPU Targets Byte Offset 461 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO460  ,CPU Targets Byte Offset 460 "
group.long 0x9D0++0x03
line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO467  ,CPU Targets Byte Offset 467 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO466  ,CPU Targets Byte Offset 466 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO465  ,CPU Targets Byte Offset 465 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO464  ,CPU Targets Byte Offset 464 "
group.long 0x9D4++0x03
line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO471  ,CPU Targets Byte Offset 471 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO470  ,CPU Targets Byte Offset 470 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO469  ,CPU Targets Byte Offset 469 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO468  ,CPU Targets Byte Offset 468 "
group.long 0x9D8++0x03
line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO475  ,CPU Targets Byte Offset 475 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO474  ,CPU Targets Byte Offset 474 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO473  ,CPU Targets Byte Offset 473 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO472  ,CPU Targets Byte Offset 472 "
group.long 0x9DC++0x03
line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO479  ,CPU Targets Byte Offset 479 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO478  ,CPU Targets Byte Offset 478 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO477  ,CPU Targets Byte Offset 477 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO476  ,CPU Targets Byte Offset 476 "
else
rgroup.long 0x9C0++0x03
line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112"
rgroup.long 0x9C4++0x03
line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113"
rgroup.long 0x9C8++0x03
line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114"
rgroup.long 0x9CC++0x03
line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115"
rgroup.long 0x9D0++0x03
line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116"
rgroup.long 0x9D4++0x03
line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117"
rgroup.long 0x9D8++0x03
line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118"
rgroup.long 0x9DC++0x03
line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)
group.long 0x9E0++0x03
line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO483  ,CPU Targets Byte Offset 483 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO482  ,CPU Targets Byte Offset 482 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO481  ,CPU Targets Byte Offset 481 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO480  ,CPU Targets Byte Offset 480 "
group.long 0x9E4++0x03
line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO487  ,CPU Targets Byte Offset 487 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO486  ,CPU Targets Byte Offset 486 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO485  ,CPU Targets Byte Offset 485 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO484  ,CPU Targets Byte Offset 484 "
group.long 0x9E8++0x03
line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO491  ,CPU Targets Byte Offset 491 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO490  ,CPU Targets Byte Offset 490 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO489  ,CPU Targets Byte Offset 489 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO488  ,CPU Targets Byte Offset 488 "
group.long 0x9EC++0x03
line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO495  ,CPU Targets Byte Offset 495 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO494  ,CPU Targets Byte Offset 494 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO493  ,CPU Targets Byte Offset 493 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO492  ,CPU Targets Byte Offset 492 "
group.long 0x9F0++0x03
line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO499  ,CPU Targets Byte Offset 499 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO498  ,CPU Targets Byte Offset 498 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO497  ,CPU Targets Byte Offset 497 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO496  ,CPU Targets Byte Offset 496 "
group.long 0x9F4++0x03
line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO503  ,CPU Targets Byte Offset 503 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO502  ,CPU Targets Byte Offset 502 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO501  ,CPU Targets Byte Offset 501 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO500  ,CPU Targets Byte Offset 500 "
group.long 0x9F8++0x03
line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO507  ,CPU Targets Byte Offset 507 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO506  ,CPU Targets Byte Offset 506 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO505  ,CPU Targets Byte Offset 505 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO504  ,CPU Targets Byte Offset 504 "
group.long 0x9FC++0x03
line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO511  ,CPU Targets Byte Offset 511 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO510  ,CPU Targets Byte Offset 510 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO509  ,CPU Targets Byte Offset 509 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO508  ,CPU Targets Byte Offset 508 "
else
rgroup.long 0x9E0++0x03
line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120"
rgroup.long 0x9E4++0x03
line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121"
rgroup.long 0x9E8++0x03
line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122"
rgroup.long 0x9EC++0x03
line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123"
rgroup.long 0x9F0++0x03
line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124"
rgroup.long 0x9F4++0x03
line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125"
rgroup.long 0x9F8++0x03
line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126"
rgroup.long 0x9FC++0x03
line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)
group.long 0xA00++0x03
line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO515  ,CPU Targets Byte Offset 515 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO514  ,CPU Targets Byte Offset 514 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO513  ,CPU Targets Byte Offset 513 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO512  ,CPU Targets Byte Offset 512 "
group.long 0xA04++0x03
line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO519  ,CPU Targets Byte Offset 519 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO518  ,CPU Targets Byte Offset 518 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO517  ,CPU Targets Byte Offset 517 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO516  ,CPU Targets Byte Offset 516 "
group.long 0xA08++0x03
line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO523  ,CPU Targets Byte Offset 523 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO522  ,CPU Targets Byte Offset 522 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO521  ,CPU Targets Byte Offset 521 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO520  ,CPU Targets Byte Offset 520 "
group.long 0xA0C++0x03
line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO527  ,CPU Targets Byte Offset 527 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO526  ,CPU Targets Byte Offset 526 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO525  ,CPU Targets Byte Offset 525 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO524  ,CPU Targets Byte Offset 524 "
group.long 0xA10++0x03
line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO531  ,CPU Targets Byte Offset 531 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO530  ,CPU Targets Byte Offset 530 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO529  ,CPU Targets Byte Offset 529 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO528  ,CPU Targets Byte Offset 528 "
group.long 0xA14++0x03
line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO535  ,CPU Targets Byte Offset 535 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO534  ,CPU Targets Byte Offset 534 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO533  ,CPU Targets Byte Offset 533 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO532  ,CPU Targets Byte Offset 532 "
group.long 0xA18++0x03
line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO539  ,CPU Targets Byte Offset 539 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO538  ,CPU Targets Byte Offset 538 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO537  ,CPU Targets Byte Offset 537 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO536  ,CPU Targets Byte Offset 536 "
group.long 0xA1C++0x03
line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO543  ,CPU Targets Byte Offset 543 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO542  ,CPU Targets Byte Offset 542 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO541  ,CPU Targets Byte Offset 541 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO540  ,CPU Targets Byte Offset 540 "
else
rgroup.long 0xA00++0x03
line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128"
rgroup.long 0xA04++0x03
line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129"
rgroup.long 0xA08++0x03
line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130"
rgroup.long 0xA0C++0x03
line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131"
rgroup.long 0xA10++0x03
line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132"
rgroup.long 0xA14++0x03
line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133"
rgroup.long 0xA18++0x03
line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134"
rgroup.long 0xA1C++0x03
line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)
group.long 0xA20++0x03
line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO547  ,CPU Targets Byte Offset 547 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO546  ,CPU Targets Byte Offset 546 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO545  ,CPU Targets Byte Offset 545 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO544  ,CPU Targets Byte Offset 544 "
group.long 0xA24++0x03
line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO551  ,CPU Targets Byte Offset 551 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO550  ,CPU Targets Byte Offset 550 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO549  ,CPU Targets Byte Offset 549 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO548  ,CPU Targets Byte Offset 548 "
group.long 0xA28++0x03
line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO555  ,CPU Targets Byte Offset 555 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO554  ,CPU Targets Byte Offset 554 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO553  ,CPU Targets Byte Offset 553 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO552  ,CPU Targets Byte Offset 552 "
group.long 0xA2C++0x03
line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO559  ,CPU Targets Byte Offset 559 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO558  ,CPU Targets Byte Offset 558 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO557  ,CPU Targets Byte Offset 557 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO556  ,CPU Targets Byte Offset 556 "
group.long 0xA30++0x03
line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO563  ,CPU Targets Byte Offset 563 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO562  ,CPU Targets Byte Offset 562 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO561  ,CPU Targets Byte Offset 561 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO560  ,CPU Targets Byte Offset 560 "
group.long 0xA34++0x03
line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO567  ,CPU Targets Byte Offset 567 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO566  ,CPU Targets Byte Offset 566 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO565  ,CPU Targets Byte Offset 565 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO564  ,CPU Targets Byte Offset 564 "
group.long 0xA38++0x03
line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO571  ,CPU Targets Byte Offset 571 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO570  ,CPU Targets Byte Offset 570 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO569  ,CPU Targets Byte Offset 569 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO568  ,CPU Targets Byte Offset 568 "
group.long 0xA3C++0x03
line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO575  ,CPU Targets Byte Offset 575 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO574  ,CPU Targets Byte Offset 574 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO573  ,CPU Targets Byte Offset 573 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO572  ,CPU Targets Byte Offset 572 "
else
rgroup.long 0xA20++0x03
line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136"
rgroup.long 0xA24++0x03
line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137"
rgroup.long 0xA28++0x03
line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138"
rgroup.long 0xA2C++0x03
line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139"
rgroup.long 0xA30++0x03
line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140"
rgroup.long 0xA34++0x03
line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141"
rgroup.long 0xA38++0x03
line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142"
rgroup.long 0xA3C++0x03
line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)
group.long 0xA40++0x03
line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO579  ,CPU Targets Byte Offset 579 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO578  ,CPU Targets Byte Offset 578 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO577  ,CPU Targets Byte Offset 577 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO576  ,CPU Targets Byte Offset 576 "
group.long 0xA44++0x03
line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO583  ,CPU Targets Byte Offset 583 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO582  ,CPU Targets Byte Offset 582 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO581  ,CPU Targets Byte Offset 581 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO580  ,CPU Targets Byte Offset 580 "
group.long 0xA48++0x03
line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO587  ,CPU Targets Byte Offset 587 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO586  ,CPU Targets Byte Offset 586 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO585  ,CPU Targets Byte Offset 585 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO584  ,CPU Targets Byte Offset 584 "
group.long 0xA4C++0x03
line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO591  ,CPU Targets Byte Offset 591 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO590  ,CPU Targets Byte Offset 590 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO589  ,CPU Targets Byte Offset 589 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO588  ,CPU Targets Byte Offset 588 "
group.long 0xA50++0x03
line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO595  ,CPU Targets Byte Offset 595 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO594  ,CPU Targets Byte Offset 594 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO593  ,CPU Targets Byte Offset 593 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO592  ,CPU Targets Byte Offset 592 "
group.long 0xA54++0x03
line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO599  ,CPU Targets Byte Offset 599 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO598  ,CPU Targets Byte Offset 598 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO597  ,CPU Targets Byte Offset 597 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO596  ,CPU Targets Byte Offset 596 "
group.long 0xA58++0x03
line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO603  ,CPU Targets Byte Offset 603 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO602  ,CPU Targets Byte Offset 602 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO601  ,CPU Targets Byte Offset 601 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO600  ,CPU Targets Byte Offset 600 "
group.long 0xA5C++0x03
line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO607  ,CPU Targets Byte Offset 607 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO606  ,CPU Targets Byte Offset 606 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO605  ,CPU Targets Byte Offset 605 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO604  ,CPU Targets Byte Offset 604 "
else
rgroup.long 0xA40++0x03
line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144"
rgroup.long 0xA44++0x03
line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145"
rgroup.long 0xA48++0x03
line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146"
rgroup.long 0xA4C++0x03
line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147"
rgroup.long 0xA50++0x03
line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148"
rgroup.long 0xA54++0x03
line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149"
rgroup.long 0xA58++0x03
line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150"
rgroup.long 0xA5C++0x03
line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)
group.long 0xA60++0x03
line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO611  ,CPU Targets Byte Offset 611 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO610  ,CPU Targets Byte Offset 610 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO609  ,CPU Targets Byte Offset 609 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO608  ,CPU Targets Byte Offset 608 "
group.long 0xA64++0x03
line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO615  ,CPU Targets Byte Offset 615 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO614  ,CPU Targets Byte Offset 614 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO613  ,CPU Targets Byte Offset 613 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO612  ,CPU Targets Byte Offset 612 "
group.long 0xA68++0x03
line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO619  ,CPU Targets Byte Offset 619 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO618  ,CPU Targets Byte Offset 618 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO617  ,CPU Targets Byte Offset 617 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO616  ,CPU Targets Byte Offset 616 "
group.long 0xA6C++0x03
line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO623  ,CPU Targets Byte Offset 623 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO622  ,CPU Targets Byte Offset 622 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO621  ,CPU Targets Byte Offset 621 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO620  ,CPU Targets Byte Offset 620 "
group.long 0xA70++0x03
line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO627  ,CPU Targets Byte Offset 627 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO626  ,CPU Targets Byte Offset 626 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO625  ,CPU Targets Byte Offset 625 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO624  ,CPU Targets Byte Offset 624 "
group.long 0xA74++0x03
line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO631  ,CPU Targets Byte Offset 631 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO630  ,CPU Targets Byte Offset 630 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO629  ,CPU Targets Byte Offset 629 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO628  ,CPU Targets Byte Offset 628 "
group.long 0xA78++0x03
line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO635  ,CPU Targets Byte Offset 635 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO634  ,CPU Targets Byte Offset 634 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO633  ,CPU Targets Byte Offset 633 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO632  ,CPU Targets Byte Offset 632 "
group.long 0xA7C++0x03
line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO639  ,CPU Targets Byte Offset 639 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO638  ,CPU Targets Byte Offset 638 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO637  ,CPU Targets Byte Offset 637 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO636  ,CPU Targets Byte Offset 636 "
else
rgroup.long 0xA60++0x03
line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152"
rgroup.long 0xA64++0x03
line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153"
rgroup.long 0xA68++0x03
line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154"
rgroup.long 0xA6C++0x03
line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155"
rgroup.long 0xA70++0x03
line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156"
rgroup.long 0xA74++0x03
line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157"
rgroup.long 0xA78++0x03
line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158"
rgroup.long 0xA7C++0x03
line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)
group.long 0xA80++0x03
line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO643  ,CPU Targets Byte Offset 643 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO642  ,CPU Targets Byte Offset 642 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO641  ,CPU Targets Byte Offset 641 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO640  ,CPU Targets Byte Offset 640 "
group.long 0xA84++0x03
line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO647  ,CPU Targets Byte Offset 647 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO646  ,CPU Targets Byte Offset 646 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO645  ,CPU Targets Byte Offset 645 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO644  ,CPU Targets Byte Offset 644 "
group.long 0xA88++0x03
line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO651  ,CPU Targets Byte Offset 651 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO650  ,CPU Targets Byte Offset 650 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO649  ,CPU Targets Byte Offset 649 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO648  ,CPU Targets Byte Offset 648 "
group.long 0xA8C++0x03
line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO655  ,CPU Targets Byte Offset 655 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO654  ,CPU Targets Byte Offset 654 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO653  ,CPU Targets Byte Offset 653 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO652  ,CPU Targets Byte Offset 652 "
group.long 0xA90++0x03
line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO659  ,CPU Targets Byte Offset 659 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO658  ,CPU Targets Byte Offset 658 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO657  ,CPU Targets Byte Offset 657 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO656  ,CPU Targets Byte Offset 656 "
group.long 0xA94++0x03
line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO663  ,CPU Targets Byte Offset 663 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO662  ,CPU Targets Byte Offset 662 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO661  ,CPU Targets Byte Offset 661 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO660  ,CPU Targets Byte Offset 660 "
group.long 0xA98++0x03
line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO667  ,CPU Targets Byte Offset 667 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO666  ,CPU Targets Byte Offset 666 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO665  ,CPU Targets Byte Offset 665 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO664  ,CPU Targets Byte Offset 664 "
group.long 0xA9C++0x03
line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO671  ,CPU Targets Byte Offset 671 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO670  ,CPU Targets Byte Offset 670 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO669  ,CPU Targets Byte Offset 669 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO668  ,CPU Targets Byte Offset 668 "
else
rgroup.long 0xA80++0x03
line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160"
rgroup.long 0xA84++0x03
line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161"
rgroup.long 0xA88++0x03
line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162"
rgroup.long 0xA8C++0x03
line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163"
rgroup.long 0xA90++0x03
line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164"
rgroup.long 0xA94++0x03
line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165"
rgroup.long 0xA98++0x03
line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166"
rgroup.long 0xA9C++0x03
line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)
group.long 0xAA0++0x03
line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO675  ,CPU Targets Byte Offset 675 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO674  ,CPU Targets Byte Offset 674 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO673  ,CPU Targets Byte Offset 673 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO672  ,CPU Targets Byte Offset 672 "
group.long 0xAA4++0x03
line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO679  ,CPU Targets Byte Offset 679 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO678  ,CPU Targets Byte Offset 678 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO677  ,CPU Targets Byte Offset 677 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO676  ,CPU Targets Byte Offset 676 "
group.long 0xAA8++0x03
line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO683  ,CPU Targets Byte Offset 683 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO682  ,CPU Targets Byte Offset 682 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO681  ,CPU Targets Byte Offset 681 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO680  ,CPU Targets Byte Offset 680 "
group.long 0xAAC++0x03
line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO687  ,CPU Targets Byte Offset 687 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO686  ,CPU Targets Byte Offset 686 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO685  ,CPU Targets Byte Offset 685 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO684  ,CPU Targets Byte Offset 684 "
group.long 0xAB0++0x03
line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO691  ,CPU Targets Byte Offset 691 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO690  ,CPU Targets Byte Offset 690 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO689  ,CPU Targets Byte Offset 689 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO688  ,CPU Targets Byte Offset 688 "
group.long 0xAB4++0x03
line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO695  ,CPU Targets Byte Offset 695 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO694  ,CPU Targets Byte Offset 694 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO693  ,CPU Targets Byte Offset 693 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO692  ,CPU Targets Byte Offset 692 "
group.long 0xAB8++0x03
line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO699  ,CPU Targets Byte Offset 699 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO698  ,CPU Targets Byte Offset 698 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO697  ,CPU Targets Byte Offset 697 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO696  ,CPU Targets Byte Offset 696 "
group.long 0xABC++0x03
line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO703  ,CPU Targets Byte Offset 703 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO702  ,CPU Targets Byte Offset 702 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO701  ,CPU Targets Byte Offset 701 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO700  ,CPU Targets Byte Offset 700 "
else
rgroup.long 0xAA0++0x03
line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168"
rgroup.long 0xAA4++0x03
line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169"
rgroup.long 0xAA8++0x03
line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170"
rgroup.long 0xAAC++0x03
line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171"
rgroup.long 0xAB0++0x03
line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172"
rgroup.long 0xAB4++0x03
line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173"
rgroup.long 0xAB8++0x03
line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174"
rgroup.long 0xABC++0x03
line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)
group.long 0xAC0++0x03
line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO707  ,CPU Targets Byte Offset 707 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO706  ,CPU Targets Byte Offset 706 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO705  ,CPU Targets Byte Offset 705 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO704  ,CPU Targets Byte Offset 704 "
group.long 0xAC4++0x03
line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO711  ,CPU Targets Byte Offset 711 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO710  ,CPU Targets Byte Offset 710 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO709  ,CPU Targets Byte Offset 709 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO708  ,CPU Targets Byte Offset 708 "
group.long 0xAC8++0x03
line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO715  ,CPU Targets Byte Offset 715 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO714  ,CPU Targets Byte Offset 714 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO713  ,CPU Targets Byte Offset 713 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO712  ,CPU Targets Byte Offset 712 "
group.long 0xACC++0x03
line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO719  ,CPU Targets Byte Offset 719 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO718  ,CPU Targets Byte Offset 718 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO717  ,CPU Targets Byte Offset 717 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO716  ,CPU Targets Byte Offset 716 "
group.long 0xAD0++0x03
line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO723  ,CPU Targets Byte Offset 723 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO722  ,CPU Targets Byte Offset 722 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO721  ,CPU Targets Byte Offset 721 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO720  ,CPU Targets Byte Offset 720 "
group.long 0xAD4++0x03
line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO727  ,CPU Targets Byte Offset 727 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO726  ,CPU Targets Byte Offset 726 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO725  ,CPU Targets Byte Offset 725 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO724  ,CPU Targets Byte Offset 724 "
group.long 0xAD8++0x03
line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO731  ,CPU Targets Byte Offset 731 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO730  ,CPU Targets Byte Offset 730 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO729  ,CPU Targets Byte Offset 729 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO728  ,CPU Targets Byte Offset 728 "
group.long 0xADC++0x03
line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO735  ,CPU Targets Byte Offset 735 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO734  ,CPU Targets Byte Offset 734 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO733  ,CPU Targets Byte Offset 733 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO732  ,CPU Targets Byte Offset 732 "
else
rgroup.long 0xAC0++0x03
line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176"
rgroup.long 0xAC4++0x03
line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177"
rgroup.long 0xAC8++0x03
line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178"
rgroup.long 0xACC++0x03
line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179"
rgroup.long 0xAD0++0x03
line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180"
rgroup.long 0xAD4++0x03
line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181"
rgroup.long 0xAD8++0x03
line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182"
rgroup.long 0xADC++0x03
line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)
group.long 0xAE0++0x03
line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO739  ,CPU Targets Byte Offset 739 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO738  ,CPU Targets Byte Offset 738 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO737  ,CPU Targets Byte Offset 737 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO736  ,CPU Targets Byte Offset 736 "
group.long 0xAE4++0x03
line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO743  ,CPU Targets Byte Offset 743 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO742  ,CPU Targets Byte Offset 742 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO741  ,CPU Targets Byte Offset 741 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO740  ,CPU Targets Byte Offset 740 "
group.long 0xAE8++0x03
line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO747  ,CPU Targets Byte Offset 747 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO746  ,CPU Targets Byte Offset 746 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO745  ,CPU Targets Byte Offset 745 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO744  ,CPU Targets Byte Offset 744 "
group.long 0xAEC++0x03
line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO751  ,CPU Targets Byte Offset 751 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO750  ,CPU Targets Byte Offset 750 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO749  ,CPU Targets Byte Offset 749 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO748  ,CPU Targets Byte Offset 748 "
group.long 0xAF0++0x03
line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO755  ,CPU Targets Byte Offset 755 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO754  ,CPU Targets Byte Offset 754 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO753  ,CPU Targets Byte Offset 753 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO752  ,CPU Targets Byte Offset 752 "
group.long 0xAF4++0x03
line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO759  ,CPU Targets Byte Offset 759 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO758  ,CPU Targets Byte Offset 758 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO757  ,CPU Targets Byte Offset 757 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO756  ,CPU Targets Byte Offset 756 "
group.long 0xAF8++0x03
line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO763  ,CPU Targets Byte Offset 763 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO762  ,CPU Targets Byte Offset 762 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO761  ,CPU Targets Byte Offset 761 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO760  ,CPU Targets Byte Offset 760 "
group.long 0xAFC++0x03
line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO767  ,CPU Targets Byte Offset 767 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO766  ,CPU Targets Byte Offset 766 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO765  ,CPU Targets Byte Offset 765 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO764  ,CPU Targets Byte Offset 764 "
else
rgroup.long 0xAE0++0x03
line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184"
rgroup.long 0xAE4++0x03
line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185"
rgroup.long 0xAE8++0x03
line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186"
rgroup.long 0xAEC++0x03
line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187"
rgroup.long 0xAF0++0x03
line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188"
rgroup.long 0xAF4++0x03
line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189"
rgroup.long 0xAF8++0x03
line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190"
rgroup.long 0xAFC++0x03
line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)
group.long 0xB00++0x03
line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO771  ,CPU Targets Byte Offset 771 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO770  ,CPU Targets Byte Offset 770 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO769  ,CPU Targets Byte Offset 769 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO768  ,CPU Targets Byte Offset 768 "
group.long 0xB04++0x03
line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO775  ,CPU Targets Byte Offset 775 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO774  ,CPU Targets Byte Offset 774 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO773  ,CPU Targets Byte Offset 773 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO772  ,CPU Targets Byte Offset 772 "
group.long 0xB08++0x03
line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO779  ,CPU Targets Byte Offset 779 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO778  ,CPU Targets Byte Offset 778 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO777  ,CPU Targets Byte Offset 777 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO776  ,CPU Targets Byte Offset 776 "
group.long 0xB0C++0x03
line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO783  ,CPU Targets Byte Offset 783 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO782  ,CPU Targets Byte Offset 782 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO781  ,CPU Targets Byte Offset 781 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO780  ,CPU Targets Byte Offset 780 "
group.long 0xB10++0x03
line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO787  ,CPU Targets Byte Offset 787 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO786  ,CPU Targets Byte Offset 786 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO785  ,CPU Targets Byte Offset 785 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO784  ,CPU Targets Byte Offset 784 "
group.long 0xB14++0x03
line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO791  ,CPU Targets Byte Offset 791 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO790  ,CPU Targets Byte Offset 790 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO789  ,CPU Targets Byte Offset 789 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO788  ,CPU Targets Byte Offset 788 "
group.long 0xB18++0x03
line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO795  ,CPU Targets Byte Offset 795 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO794  ,CPU Targets Byte Offset 794 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO793  ,CPU Targets Byte Offset 793 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO792  ,CPU Targets Byte Offset 792 "
group.long 0xB1C++0x03
line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO799  ,CPU Targets Byte Offset 799 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO798  ,CPU Targets Byte Offset 798 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO797  ,CPU Targets Byte Offset 797 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO796  ,CPU Targets Byte Offset 796 "
else
rgroup.long 0xB00++0x03
line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192"
rgroup.long 0xB04++0x03
line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193"
rgroup.long 0xB08++0x03
line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194"
rgroup.long 0xB0C++0x03
line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195"
rgroup.long 0xB10++0x03
line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196"
rgroup.long 0xB14++0x03
line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197"
rgroup.long 0xB18++0x03
line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198"
rgroup.long 0xB1C++0x03
line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)
group.long 0xB20++0x03
line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO803  ,CPU Targets Byte Offset 803 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO802  ,CPU Targets Byte Offset 802 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO801  ,CPU Targets Byte Offset 801 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO800  ,CPU Targets Byte Offset 800 "
group.long 0xB24++0x03
line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO807  ,CPU Targets Byte Offset 807 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO806  ,CPU Targets Byte Offset 806 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO805  ,CPU Targets Byte Offset 805 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO804  ,CPU Targets Byte Offset 804 "
group.long 0xB28++0x03
line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO811  ,CPU Targets Byte Offset 811 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO810  ,CPU Targets Byte Offset 810 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO809  ,CPU Targets Byte Offset 809 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO808  ,CPU Targets Byte Offset 808 "
group.long 0xB2C++0x03
line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO815  ,CPU Targets Byte Offset 815 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO814  ,CPU Targets Byte Offset 814 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO813  ,CPU Targets Byte Offset 813 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO812  ,CPU Targets Byte Offset 812 "
group.long 0xB30++0x03
line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO819  ,CPU Targets Byte Offset 819 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO818  ,CPU Targets Byte Offset 818 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO817  ,CPU Targets Byte Offset 817 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO816  ,CPU Targets Byte Offset 816 "
group.long 0xB34++0x03
line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO823  ,CPU Targets Byte Offset 823 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO822  ,CPU Targets Byte Offset 822 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO821  ,CPU Targets Byte Offset 821 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO820  ,CPU Targets Byte Offset 820 "
group.long 0xB38++0x03
line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO827  ,CPU Targets Byte Offset 827 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO826  ,CPU Targets Byte Offset 826 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO825  ,CPU Targets Byte Offset 825 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO824  ,CPU Targets Byte Offset 824 "
group.long 0xB3C++0x03
line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO831  ,CPU Targets Byte Offset 831 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO830  ,CPU Targets Byte Offset 830 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO829  ,CPU Targets Byte Offset 829 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO828  ,CPU Targets Byte Offset 828 "
else
rgroup.long 0xB20++0x03
line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200"
rgroup.long 0xB24++0x03
line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201"
rgroup.long 0xB28++0x03
line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202"
rgroup.long 0xB2C++0x03
line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203"
rgroup.long 0xB30++0x03
line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204"
rgroup.long 0xB34++0x03
line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205"
rgroup.long 0xB38++0x03
line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206"
rgroup.long 0xB3C++0x03
line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)
group.long 0xB40++0x03
line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO835  ,CPU Targets Byte Offset 835 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO834  ,CPU Targets Byte Offset 834 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO833  ,CPU Targets Byte Offset 833 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO832  ,CPU Targets Byte Offset 832 "
group.long 0xB44++0x03
line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO839  ,CPU Targets Byte Offset 839 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO838  ,CPU Targets Byte Offset 838 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO837  ,CPU Targets Byte Offset 837 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO836  ,CPU Targets Byte Offset 836 "
group.long 0xB48++0x03
line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO843  ,CPU Targets Byte Offset 843 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO842  ,CPU Targets Byte Offset 842 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO841  ,CPU Targets Byte Offset 841 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO840  ,CPU Targets Byte Offset 840 "
group.long 0xB4C++0x03
line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO847  ,CPU Targets Byte Offset 847 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO846  ,CPU Targets Byte Offset 846 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO845  ,CPU Targets Byte Offset 845 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO844  ,CPU Targets Byte Offset 844 "
group.long 0xB50++0x03
line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO851  ,CPU Targets Byte Offset 851 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO850  ,CPU Targets Byte Offset 850 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO849  ,CPU Targets Byte Offset 849 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO848  ,CPU Targets Byte Offset 848 "
group.long 0xB54++0x03
line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO855  ,CPU Targets Byte Offset 855 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO854  ,CPU Targets Byte Offset 854 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO853  ,CPU Targets Byte Offset 853 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO852  ,CPU Targets Byte Offset 852 "
group.long 0xB58++0x03
line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO859  ,CPU Targets Byte Offset 859 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO858  ,CPU Targets Byte Offset 858 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO857  ,CPU Targets Byte Offset 857 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO856  ,CPU Targets Byte Offset 856 "
group.long 0xB5C++0x03
line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO863  ,CPU Targets Byte Offset 863 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO862  ,CPU Targets Byte Offset 862 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO861  ,CPU Targets Byte Offset 861 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO860  ,CPU Targets Byte Offset 860 "
else
rgroup.long 0xB40++0x03
line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208"
rgroup.long 0xB44++0x03
line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209"
rgroup.long 0xB48++0x03
line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210"
rgroup.long 0xB4C++0x03
line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211"
rgroup.long 0xB50++0x03
line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212"
rgroup.long 0xB54++0x03
line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213"
rgroup.long 0xB58++0x03
line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214"
rgroup.long 0xB5C++0x03
line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)
group.long 0xB60++0x03
line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO867  ,CPU Targets Byte Offset 867 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO866  ,CPU Targets Byte Offset 866 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO865  ,CPU Targets Byte Offset 865 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO864  ,CPU Targets Byte Offset 864 "
group.long 0xB64++0x03
line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO871  ,CPU Targets Byte Offset 871 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO870  ,CPU Targets Byte Offset 870 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO869  ,CPU Targets Byte Offset 869 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO868  ,CPU Targets Byte Offset 868 "
group.long 0xB68++0x03
line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO875  ,CPU Targets Byte Offset 875 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO874  ,CPU Targets Byte Offset 874 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO873  ,CPU Targets Byte Offset 873 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO872  ,CPU Targets Byte Offset 872 "
group.long 0xB6C++0x03
line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO879  ,CPU Targets Byte Offset 879 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO878  ,CPU Targets Byte Offset 878 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO877  ,CPU Targets Byte Offset 877 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO876  ,CPU Targets Byte Offset 876 "
group.long 0xB70++0x03
line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO883  ,CPU Targets Byte Offset 883 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO882  ,CPU Targets Byte Offset 882 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO881  ,CPU Targets Byte Offset 881 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO880  ,CPU Targets Byte Offset 880 "
group.long 0xB74++0x03
line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO887  ,CPU Targets Byte Offset 887 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO886  ,CPU Targets Byte Offset 886 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO885  ,CPU Targets Byte Offset 885 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO884  ,CPU Targets Byte Offset 884 "
group.long 0xB78++0x03
line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO891  ,CPU Targets Byte Offset 891 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO890  ,CPU Targets Byte Offset 890 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO889  ,CPU Targets Byte Offset 889 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO888  ,CPU Targets Byte Offset 888 "
group.long 0xB7C++0x03
line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO895  ,CPU Targets Byte Offset 895 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO894  ,CPU Targets Byte Offset 894 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO893  ,CPU Targets Byte Offset 893 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO892  ,CPU Targets Byte Offset 892 "
else
rgroup.long 0xB60++0x03
line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216"
rgroup.long 0xB64++0x03
line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217"
rgroup.long 0xB68++0x03
line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218"
rgroup.long 0xB6C++0x03
line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219"
rgroup.long 0xB70++0x03
line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220"
rgroup.long 0xB74++0x03
line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221"
rgroup.long 0xB78++0x03
line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222"
rgroup.long 0xB7C++0x03
line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)
group.long 0xB80++0x03
line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO899  ,CPU Targets Byte Offset 899 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO898  ,CPU Targets Byte Offset 898 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO897  ,CPU Targets Byte Offset 897 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO896  ,CPU Targets Byte Offset 896 "
group.long 0xB84++0x03
line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO903  ,CPU Targets Byte Offset 903 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO902  ,CPU Targets Byte Offset 902 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO901  ,CPU Targets Byte Offset 901 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO900  ,CPU Targets Byte Offset 900 "
group.long 0xB88++0x03
line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO907  ,CPU Targets Byte Offset 907 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO906  ,CPU Targets Byte Offset 906 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO905  ,CPU Targets Byte Offset 905 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO904  ,CPU Targets Byte Offset 904 "
group.long 0xB8C++0x03
line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO911  ,CPU Targets Byte Offset 911 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO910  ,CPU Targets Byte Offset 910 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO909  ,CPU Targets Byte Offset 909 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO908  ,CPU Targets Byte Offset 908 "
group.long 0xB90++0x03
line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO915  ,CPU Targets Byte Offset 915 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO914  ,CPU Targets Byte Offset 914 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO913  ,CPU Targets Byte Offset 913 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO912  ,CPU Targets Byte Offset 912 "
group.long 0xB94++0x03
line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO919  ,CPU Targets Byte Offset 919 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO918  ,CPU Targets Byte Offset 918 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO917  ,CPU Targets Byte Offset 917 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO916  ,CPU Targets Byte Offset 916 "
group.long 0xB98++0x03
line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO923  ,CPU Targets Byte Offset 923 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO922  ,CPU Targets Byte Offset 922 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO921  ,CPU Targets Byte Offset 921 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO920  ,CPU Targets Byte Offset 920 "
group.long 0xB9C++0x03
line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO927  ,CPU Targets Byte Offset 927 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO926  ,CPU Targets Byte Offset 926 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO925  ,CPU Targets Byte Offset 925 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO924  ,CPU Targets Byte Offset 924 "
else
rgroup.long 0xB80++0x03
line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224"
rgroup.long 0xB84++0x03
line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225"
rgroup.long 0xB88++0x03
line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226"
rgroup.long 0xB8C++0x03
line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227"
rgroup.long 0xB90++0x03
line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228"
rgroup.long 0xB94++0x03
line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229"
rgroup.long 0xB98++0x03
line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230"
rgroup.long 0xB9C++0x03
line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)
group.long 0xBA0++0x03
line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO931  ,CPU Targets Byte Offset 931 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO930  ,CPU Targets Byte Offset 930 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO929  ,CPU Targets Byte Offset 929 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO928  ,CPU Targets Byte Offset 928 "
group.long 0xBA4++0x03
line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO935  ,CPU Targets Byte Offset 935 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO934  ,CPU Targets Byte Offset 934 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO933  ,CPU Targets Byte Offset 933 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO932  ,CPU Targets Byte Offset 932 "
group.long 0xBA8++0x03
line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO939  ,CPU Targets Byte Offset 939 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO938  ,CPU Targets Byte Offset 938 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO937  ,CPU Targets Byte Offset 937 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO936  ,CPU Targets Byte Offset 936 "
group.long 0xBAC++0x03
line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO943  ,CPU Targets Byte Offset 943 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO942  ,CPU Targets Byte Offset 942 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO941  ,CPU Targets Byte Offset 941 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO940  ,CPU Targets Byte Offset 940 "
group.long 0xBB0++0x03
line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO947  ,CPU Targets Byte Offset 947 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO946  ,CPU Targets Byte Offset 946 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO945  ,CPU Targets Byte Offset 945 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO944  ,CPU Targets Byte Offset 944 "
group.long 0xBB4++0x03
line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO951  ,CPU Targets Byte Offset 951 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO950  ,CPU Targets Byte Offset 950 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO949  ,CPU Targets Byte Offset 949 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO948  ,CPU Targets Byte Offset 948 "
group.long 0xBB8++0x03
line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO955  ,CPU Targets Byte Offset 955 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO954  ,CPU Targets Byte Offset 954 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO953  ,CPU Targets Byte Offset 953 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO952  ,CPU Targets Byte Offset 952 "
group.long 0xBBC++0x03
line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO959  ,CPU Targets Byte Offset 959 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO958  ,CPU Targets Byte Offset 958 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO957  ,CPU Targets Byte Offset 957 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO956  ,CPU Targets Byte Offset 956 "
else
rgroup.long 0xBA0++0x03
line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232"
rgroup.long 0xBA4++0x03
line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233"
rgroup.long 0xBA8++0x03
line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234"
rgroup.long 0xBAC++0x03
line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235"
rgroup.long 0xBB0++0x03
line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236"
rgroup.long 0xBB4++0x03
line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237"
rgroup.long 0xBB8++0x03
line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238"
rgroup.long 0xBBC++0x03
line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)
group.long 0xBC0++0x03
line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO963  ,CPU Targets Byte Offset 963 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO962  ,CPU Targets Byte Offset 962 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO961  ,CPU Targets Byte Offset 961 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO960  ,CPU Targets Byte Offset 960 "
group.long 0xBC4++0x03
line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO967  ,CPU Targets Byte Offset 967 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO966  ,CPU Targets Byte Offset 966 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO965  ,CPU Targets Byte Offset 965 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO964  ,CPU Targets Byte Offset 964 "
group.long 0xBC8++0x03
line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO971  ,CPU Targets Byte Offset 971 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO970  ,CPU Targets Byte Offset 970 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO969  ,CPU Targets Byte Offset 969 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO968  ,CPU Targets Byte Offset 968 "
group.long 0xBCC++0x03
line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO975  ,CPU Targets Byte Offset 975 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO974  ,CPU Targets Byte Offset 974 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO973  ,CPU Targets Byte Offset 973 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO972  ,CPU Targets Byte Offset 972 "
group.long 0xBD0++0x03
line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO979  ,CPU Targets Byte Offset 979 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO978  ,CPU Targets Byte Offset 978 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO977  ,CPU Targets Byte Offset 977 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO976  ,CPU Targets Byte Offset 976 "
group.long 0xBD4++0x03
line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO983  ,CPU Targets Byte Offset 983 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO982  ,CPU Targets Byte Offset 982 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO981  ,CPU Targets Byte Offset 981 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO980  ,CPU Targets Byte Offset 980 "
group.long 0xBD8++0x03
line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO987  ,CPU Targets Byte Offset 987 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO986  ,CPU Targets Byte Offset 986 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO985  ,CPU Targets Byte Offset 985 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO984  ,CPU Targets Byte Offset 984 "
group.long 0xBDC++0x03
line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO991  ,CPU Targets Byte Offset 991 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO990  ,CPU Targets Byte Offset 990 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO989  ,CPU Targets Byte Offset 989 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO988  ,CPU Targets Byte Offset 988 "
else
rgroup.long 0xBC0++0x03
line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240"
rgroup.long 0xBC4++0x03
line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241"
rgroup.long 0xBC8++0x03
line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242"
rgroup.long 0xBCC++0x03
line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243"
rgroup.long 0xBD0++0x03
line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244"
rgroup.long 0xBD4++0x03
line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245"
rgroup.long 0xBD8++0x03
line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246"
rgroup.long 0xBDC++0x03
line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1F)
group.long 0xBE0++0x03
line.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO995  ,CPU Targets Byte Offset 995 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO994  ,CPU Targets Byte Offset 994 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO993  ,CPU Targets Byte Offset 993 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO992  ,CPU Targets Byte Offset 992 "
group.long 0xBE4++0x03
line.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO999  ,CPU Targets Byte Offset 999 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO998  ,CPU Targets Byte Offset 998 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO997  ,CPU Targets Byte Offset 997 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO996  ,CPU Targets Byte Offset 996 "
group.long 0xBE8++0x03
line.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1003 ,CPU Targets Byte Offset 1003"
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO1002 ,CPU Targets Byte Offset 1002"
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO1001 ,CPU Targets Byte Offset 1001"
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO1000 ,CPU Targets Byte Offset 1000"
group.long 0xBEC++0x03
line.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1007 ,CPU Targets Byte Offset 1007"
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO1006 ,CPU Targets Byte Offset 1006"
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO1005 ,CPU Targets Byte Offset 1005"
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO1004 ,CPU Targets Byte Offset 1004"
group.long 0xBF0++0x03
line.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1011 ,CPU Targets Byte Offset 1011"
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO1010 ,CPU Targets Byte Offset 1010"
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO1009 ,CPU Targets Byte Offset 1009"
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO1008 ,CPU Targets Byte Offset 1008"
group.long 0xBF4++0x03
line.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1015 ,CPU Targets Byte Offset 1015"
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO1014 ,CPU Targets Byte Offset 1014"
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO1013 ,CPU Targets Byte Offset 1013"
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO1012 ,CPU Targets Byte Offset 1012"
group.long 0xBF8++0x03
line.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1019 ,CPU Targets Byte Offset 1019"
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO1018 ,CPU Targets Byte Offset 1018"
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO1017 ,CPU Targets Byte Offset 1017"
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO1016 ,CPU Targets Byte Offset 1016"
else
rgroup.long 0xBE0++0x03
line.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248"
rgroup.long 0xBE4++0x03
line.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249"
rgroup.long 0xBE8++0x03
line.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250"
rgroup.long 0xBEC++0x03
line.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251"
rgroup.long 0xBF0++0x03
line.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252"
rgroup.long 0xBF4++0x03
line.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253"
rgroup.long 0xBF8++0x03
line.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254"
endif
else
rgroup.long 0x800++0x03
line.long 0x00 "GICD_ITARGETSR0  ,Interrupt Processor Targets Register 0  "
rgroup.long 0x804++0x03
line.long 0x00 "GICD_ITARGETSR1  ,Interrupt Processor Targets Register 1  "
rgroup.long 0x808++0x03
line.long 0x00 "GICD_ITARGETSR2  ,Interrupt Processor Targets Register 2  "
rgroup.long 0x80C++0x03
line.long 0x00 "GICD_ITARGETSR3  ,Interrupt Processor Targets Register 3  "
rgroup.long 0x810++0x03
line.long 0x00 "GICD_ITARGETSR4  ,Interrupt Processor Targets Register 4  "
rgroup.long 0x814++0x03
line.long 0x00 "GICD_ITARGETSR5  ,Interrupt Processor Targets Register 5  "
rgroup.long 0x818++0x03
line.long 0x00 "GICD_ITARGETSR6  ,Interrupt Processor Targets Register 6  "
rgroup.long 0x81C++0x03
line.long 0x00 "GICD_ITARGETSR7  ,Interrupt Processor Targets Register 7  "
rgroup.long 0x820++0x03
line.long 0x00 "GICD_ITARGETSR8  ,Interrupt Processor Targets Register 8  "
rgroup.long 0x824++0x03
line.long 0x00 "GICD_ITARGETSR9  ,Interrupt Processor Targets Register 9  "
rgroup.long 0x828++0x03
line.long 0x00 "GICD_ITARGETSR10 ,Interrupt Processor Targets Register 10 "
rgroup.long 0x82C++0x03
line.long 0x00 "GICD_ITARGETSR11 ,Interrupt Processor Targets Register 11 "
rgroup.long 0x830++0x03
line.long 0x00 "GICD_ITARGETSR12 ,Interrupt Processor Targets Register 12 "
rgroup.long 0x834++0x03
line.long 0x00 "GICD_ITARGETSR13 ,Interrupt Processor Targets Register 13 "
rgroup.long 0x838++0x03
line.long 0x00 "GICD_ITARGETSR14 ,Interrupt Processor Targets Register 14 "
rgroup.long 0x83C++0x03
line.long 0x00 "GICD_ITARGETSR15 ,Interrupt Processor Targets Register 15 "
rgroup.long 0x840++0x03
line.long 0x00 "GICD_ITARGETSR16 ,Interrupt Processor Targets Register 16 "
rgroup.long 0x844++0x03
line.long 0x00 "GICD_ITARGETSR17 ,Interrupt Processor Targets Register 17 "
rgroup.long 0x848++0x03
line.long 0x00 "GICD_ITARGETSR18 ,Interrupt Processor Targets Register 18 "
rgroup.long 0x84C++0x03
line.long 0x00 "GICD_ITARGETSR19 ,Interrupt Processor Targets Register 19 "
rgroup.long 0x850++0x03
line.long 0x00 "GICD_ITARGETSR20 ,Interrupt Processor Targets Register 20 "
rgroup.long 0x854++0x03
line.long 0x00 "GICD_ITARGETSR21 ,Interrupt Processor Targets Register 21 "
rgroup.long 0x858++0x03
line.long 0x00 "GICD_ITARGETSR22 ,Interrupt Processor Targets Register 22 "
rgroup.long 0x85C++0x03
line.long 0x00 "GICD_ITARGETSR23 ,Interrupt Processor Targets Register 23 "
rgroup.long 0x860++0x03
line.long 0x00 "GICD_ITARGETSR24 ,Interrupt Processor Targets Register 24 "
rgroup.long 0x864++0x03
line.long 0x00 "GICD_ITARGETSR25 ,Interrupt Processor Targets Register 25 "
rgroup.long 0x868++0x03
line.long 0x00 "GICD_ITARGETSR26 ,Interrupt Processor Targets Register 26 "
rgroup.long 0x86C++0x03
line.long 0x00 "GICD_ITARGETSR27 ,Interrupt Processor Targets Register 27 "
rgroup.long 0x870++0x03
line.long 0x00 "GICD_ITARGETSR28 ,Interrupt Processor Targets Register 28 "
rgroup.long 0x874++0x03
line.long 0x00 "GICD_ITARGETSR29 ,Interrupt Processor Targets Register 29 "
rgroup.long 0x878++0x03
line.long 0x00 "GICD_ITARGETSR30 ,Interrupt Processor Targets Register 30 "
rgroup.long 0x87C++0x03
line.long 0x00 "GICD_ITARGETSR31 ,Interrupt Processor Targets Register 31 "
rgroup.long 0x880++0x03
line.long 0x00 "GICD_ITARGETSR32 ,Interrupt Processor Targets Register 32 "
rgroup.long 0x884++0x03
line.long 0x00 "GICD_ITARGETSR33 ,Interrupt Processor Targets Register 33 "
rgroup.long 0x888++0x03
line.long 0x00 "GICD_ITARGETSR34 ,Interrupt Processor Targets Register 34 "
rgroup.long 0x88C++0x03
line.long 0x00 "GICD_ITARGETSR35 ,Interrupt Processor Targets Register 35 "
rgroup.long 0x890++0x03
line.long 0x00 "GICD_ITARGETSR36 ,Interrupt Processor Targets Register 36 "
rgroup.long 0x894++0x03
line.long 0x00 "GICD_ITARGETSR37 ,Interrupt Processor Targets Register 37 "
rgroup.long 0x898++0x03
line.long 0x00 "GICD_ITARGETSR38 ,Interrupt Processor Targets Register 38 "
rgroup.long 0x89C++0x03
line.long 0x00 "GICD_ITARGETSR39 ,Interrupt Processor Targets Register 39 "
rgroup.long 0x8A0++0x03
line.long 0x00 "GICD_ITARGETSR40 ,Interrupt Processor Targets Register 40 "
rgroup.long 0x8A4++0x03
line.long 0x00 "GICD_ITARGETSR41 ,Interrupt Processor Targets Register 41 "
rgroup.long 0x8A8++0x03
line.long 0x00 "GICD_ITARGETSR42 ,Interrupt Processor Targets Register 42 "
rgroup.long 0x8AC++0x03
line.long 0x00 "GICD_ITARGETSR43 ,Interrupt Processor Targets Register 43 "
rgroup.long 0x8B0++0x03
line.long 0x00 "GICD_ITARGETSR44 ,Interrupt Processor Targets Register 44 "
rgroup.long 0x8B4++0x03
line.long 0x00 "GICD_ITARGETSR45 ,Interrupt Processor Targets Register 45 "
rgroup.long 0x8B8++0x03
line.long 0x00 "GICD_ITARGETSR46 ,Interrupt Processor Targets Register 46 "
rgroup.long 0x8BC++0x03
line.long 0x00 "GICD_ITARGETSR47 ,Interrupt Processor Targets Register 47 "
rgroup.long 0x8C0++0x03
line.long 0x00 "GICD_ITARGETSR48 ,Interrupt Processor Targets Register 48 "
rgroup.long 0x8C4++0x03
line.long 0x00 "GICD_ITARGETSR49 ,Interrupt Processor Targets Register 49 "
rgroup.long 0x8C8++0x03
line.long 0x00 "GICD_ITARGETSR50 ,Interrupt Processor Targets Register 50 "
rgroup.long 0x8CC++0x03
line.long 0x00 "GICD_ITARGETSR51 ,Interrupt Processor Targets Register 51 "
rgroup.long 0x8D0++0x03
line.long 0x00 "GICD_ITARGETSR52 ,Interrupt Processor Targets Register 52 "
rgroup.long 0x8D4++0x03
line.long 0x00 "GICD_ITARGETSR53 ,Interrupt Processor Targets Register 53 "
rgroup.long 0x8D8++0x03
line.long 0x00 "GICD_ITARGETSR54 ,Interrupt Processor Targets Register 54 "
rgroup.long 0x8DC++0x03
line.long 0x00 "GICD_ITARGETSR55 ,Interrupt Processor Targets Register 55 "
rgroup.long 0x8E0++0x03
line.long 0x00 "GICD_ITARGETSR56 ,Interrupt Processor Targets Register 56 "
rgroup.long 0x8E4++0x03
line.long 0x00 "GICD_ITARGETSR57 ,Interrupt Processor Targets Register 57 "
rgroup.long 0x8E8++0x03
line.long 0x00 "GICD_ITARGETSR58 ,Interrupt Processor Targets Register 58 "
rgroup.long 0x8EC++0x03
line.long 0x00 "GICD_ITARGETSR59 ,Interrupt Processor Targets Register 59 "
rgroup.long 0x8F0++0x03
line.long 0x00 "GICD_ITARGETSR60 ,Interrupt Processor Targets Register 60 "
rgroup.long 0x8F4++0x03
line.long 0x00 "GICD_ITARGETSR61 ,Interrupt Processor Targets Register 61 "
rgroup.long 0x8F8++0x03
line.long 0x00 "GICD_ITARGETSR62 ,Interrupt Processor Targets Register 62 "
rgroup.long 0x8FC++0x03
line.long 0x00 "GICD_ITARGETSR63 ,Interrupt Processor Targets Register 63 "
rgroup.long 0x900++0x03
line.long 0x00 "GICD_ITARGETSR64 ,Interrupt Processor Targets Register 64 "
rgroup.long 0x904++0x03
line.long 0x00 "GICD_ITARGETSR65 ,Interrupt Processor Targets Register 65 "
rgroup.long 0x908++0x03
line.long 0x00 "GICD_ITARGETSR66 ,Interrupt Processor Targets Register 66 "
rgroup.long 0x90C++0x03
line.long 0x00 "GICD_ITARGETSR67 ,Interrupt Processor Targets Register 67 "
rgroup.long 0x910++0x03
line.long 0x00 "GICD_ITARGETSR68 ,Interrupt Processor Targets Register 68 "
rgroup.long 0x914++0x03
line.long 0x00 "GICD_ITARGETSR69 ,Interrupt Processor Targets Register 69 "
rgroup.long 0x918++0x03
line.long 0x00 "GICD_ITARGETSR70 ,Interrupt Processor Targets Register 70 "
rgroup.long 0x91C++0x03
line.long 0x00 "GICD_ITARGETSR71 ,Interrupt Processor Targets Register 71 "
rgroup.long 0x920++0x03
line.long 0x00 "GICD_ITARGETSR72 ,Interrupt Processor Targets Register 72 "
rgroup.long 0x924++0x03
line.long 0x00 "GICD_ITARGETSR73 ,Interrupt Processor Targets Register 73 "
rgroup.long 0x928++0x03
line.long 0x00 "GICD_ITARGETSR74 ,Interrupt Processor Targets Register 74 "
rgroup.long 0x92C++0x03
line.long 0x00 "GICD_ITARGETSR75 ,Interrupt Processor Targets Register 75 "
rgroup.long 0x930++0x03
line.long 0x00 "GICD_ITARGETSR76 ,Interrupt Processor Targets Register 76 "
rgroup.long 0x934++0x03
line.long 0x00 "GICD_ITARGETSR77 ,Interrupt Processor Targets Register 77 "
rgroup.long 0x938++0x03
line.long 0x00 "GICD_ITARGETSR78 ,Interrupt Processor Targets Register 78 "
rgroup.long 0x93C++0x03
line.long 0x00 "GICD_ITARGETSR79 ,Interrupt Processor Targets Register 79 "
rgroup.long 0x940++0x03
line.long 0x00 "GICD_ITARGETSR80 ,Interrupt Processor Targets Register 80 "
rgroup.long 0x944++0x03
line.long 0x00 "GICD_ITARGETSR81 ,Interrupt Processor Targets Register 81 "
rgroup.long 0x948++0x03
line.long 0x00 "GICD_ITARGETSR82 ,Interrupt Processor Targets Register 82 "
rgroup.long 0x94C++0x03
line.long 0x00 "GICD_ITARGETSR83 ,Interrupt Processor Targets Register 83 "
rgroup.long 0x950++0x03
line.long 0x00 "GICD_ITARGETSR84 ,Interrupt Processor Targets Register 84 "
rgroup.long 0x954++0x03
line.long 0x00 "GICD_ITARGETSR85 ,Interrupt Processor Targets Register 85 "
rgroup.long 0x958++0x03
line.long 0x00 "GICD_ITARGETSR86 ,Interrupt Processor Targets Register 86 "
rgroup.long 0x95C++0x03
line.long 0x00 "GICD_ITARGETSR87 ,Interrupt Processor Targets Register 87 "
rgroup.long 0x960++0x03
line.long 0x00 "GICD_ITARGETSR88 ,Interrupt Processor Targets Register 88 "
rgroup.long 0x964++0x03
line.long 0x00 "GICD_ITARGETSR89 ,Interrupt Processor Targets Register 89 "
rgroup.long 0x968++0x03
line.long 0x00 "GICD_ITARGETSR90 ,Interrupt Processor Targets Register 90 "
rgroup.long 0x96C++0x03
line.long 0x00 "GICD_ITARGETSR91 ,Interrupt Processor Targets Register 91 "
rgroup.long 0x970++0x03
line.long 0x00 "GICD_ITARGETSR92 ,Interrupt Processor Targets Register 92 "
rgroup.long 0x974++0x03
line.long 0x00 "GICD_ITARGETSR93 ,Interrupt Processor Targets Register 93 "
rgroup.long 0x978++0x03
line.long 0x00 "GICD_ITARGETSR94 ,Interrupt Processor Targets Register 94 "
rgroup.long 0x97C++0x03
line.long 0x00 "GICD_ITARGETSR95 ,Interrupt Processor Targets Register 95 "
rgroup.long 0x980++0x03
line.long 0x00 "GICD_ITARGETSR96 ,Interrupt Processor Targets Register 96 "
rgroup.long 0x984++0x03
line.long 0x00 "GICD_ITARGETSR97 ,Interrupt Processor Targets Register 97 "
rgroup.long 0x988++0x03
line.long 0x00 "GICD_ITARGETSR98 ,Interrupt Processor Targets Register 98 "
rgroup.long 0x98C++0x03
line.long 0x00 "GICD_ITARGETSR99 ,Interrupt Processor Targets Register 99 "
rgroup.long 0x990++0x03
line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100"
rgroup.long 0x994++0x03
line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101"
rgroup.long 0x998++0x03
line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102"
rgroup.long 0x99C++0x03
line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103"
rgroup.long 0x9A0++0x03
line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104"
rgroup.long 0x9A4++0x03
line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105"
rgroup.long 0x9A8++0x03
line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106"
rgroup.long 0x9AC++0x03
line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107"
rgroup.long 0x9B0++0x03
line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108"
rgroup.long 0x9B4++0x03
line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109"
rgroup.long 0x9B8++0x03
line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110"
rgroup.long 0x9BC++0x03
line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111"
rgroup.long 0x9C0++0x03
line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112"
rgroup.long 0x9C4++0x03
line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113"
rgroup.long 0x9C8++0x03
line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114"
rgroup.long 0x9CC++0x03
line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115"
rgroup.long 0x9D0++0x03
line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116"
rgroup.long 0x9D4++0x03
line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117"
rgroup.long 0x9D8++0x03
line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118"
rgroup.long 0x9DC++0x03
line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119"
rgroup.long 0x9E0++0x03
line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120"
rgroup.long 0x9E4++0x03
line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121"
rgroup.long 0x9E8++0x03
line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122"
rgroup.long 0x9EC++0x03
line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123"
rgroup.long 0x9F0++0x03
line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124"
rgroup.long 0x9F4++0x03
line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125"
rgroup.long 0x9F8++0x03
line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126"
rgroup.long 0x9FC++0x03
line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127"
rgroup.long 0xA00++0x03
line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128"
rgroup.long 0xA04++0x03
line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129"
rgroup.long 0xA08++0x03
line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130"
rgroup.long 0xA0C++0x03
line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131"
rgroup.long 0xA10++0x03
line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132"
rgroup.long 0xA14++0x03
line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133"
rgroup.long 0xA18++0x03
line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134"
rgroup.long 0xA1C++0x03
line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135"
rgroup.long 0xA20++0x03
line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136"
rgroup.long 0xA24++0x03
line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137"
rgroup.long 0xA28++0x03
line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138"
rgroup.long 0xA2C++0x03
line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139"
rgroup.long 0xA30++0x03
line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140"
rgroup.long 0xA34++0x03
line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141"
rgroup.long 0xA38++0x03
line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142"
rgroup.long 0xA3C++0x03
line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143"
rgroup.long 0xA40++0x03
line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144"
rgroup.long 0xA44++0x03
line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145"
rgroup.long 0xA48++0x03
line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146"
rgroup.long 0xA4C++0x03
line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147"
rgroup.long 0xA50++0x03
line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148"
rgroup.long 0xA54++0x03
line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149"
rgroup.long 0xA58++0x03
line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150"
rgroup.long 0xA5C++0x03
line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151"
rgroup.long 0xA60++0x03
line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152"
rgroup.long 0xA64++0x03
line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153"
rgroup.long 0xA68++0x03
line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154"
rgroup.long 0xA6C++0x03
line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155"
rgroup.long 0xA70++0x03
line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156"
rgroup.long 0xA74++0x03
line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157"
rgroup.long 0xA78++0x03
line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158"
rgroup.long 0xA7C++0x03
line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159"
rgroup.long 0xA80++0x03
line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160"
rgroup.long 0xA84++0x03
line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161"
rgroup.long 0xA88++0x03
line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162"
rgroup.long 0xA8C++0x03
line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163"
rgroup.long 0xA90++0x03
line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164"
rgroup.long 0xA94++0x03
line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165"
rgroup.long 0xA98++0x03
line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166"
rgroup.long 0xA9C++0x03
line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167"
rgroup.long 0xAA0++0x03
line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168"
rgroup.long 0xAA4++0x03
line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169"
rgroup.long 0xAA8++0x03
line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170"
rgroup.long 0xAAC++0x03
line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171"
rgroup.long 0xAB0++0x03
line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172"
rgroup.long 0xAB4++0x03
line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173"
rgroup.long 0xAB8++0x03
line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174"
rgroup.long 0xABC++0x03
line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175"
rgroup.long 0xAC0++0x03
line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176"
rgroup.long 0xAC4++0x03
line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177"
rgroup.long 0xAC8++0x03
line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178"
rgroup.long 0xACC++0x03
line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179"
rgroup.long 0xAD0++0x03
line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180"
rgroup.long 0xAD4++0x03
line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181"
rgroup.long 0xAD8++0x03
line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182"
rgroup.long 0xADC++0x03
line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183"
rgroup.long 0xAE0++0x03
line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184"
rgroup.long 0xAE4++0x03
line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185"
rgroup.long 0xAE8++0x03
line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186"
rgroup.long 0xAEC++0x03
line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187"
rgroup.long 0xAF0++0x03
line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188"
rgroup.long 0xAF4++0x03
line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189"
rgroup.long 0xAF8++0x03
line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190"
rgroup.long 0xAFC++0x03
line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191"
rgroup.long 0xB00++0x03
line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192"
rgroup.long 0xB04++0x03
line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193"
rgroup.long 0xB08++0x03
line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194"
rgroup.long 0xB0C++0x03
line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195"
rgroup.long 0xB10++0x03
line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196"
rgroup.long 0xB14++0x03
line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197"
rgroup.long 0xB18++0x03
line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198"
rgroup.long 0xB1C++0x03
line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199"
rgroup.long 0xB20++0x03
line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200"
rgroup.long 0xB24++0x03
line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201"
rgroup.long 0xB28++0x03
line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202"
rgroup.long 0xB2C++0x03
line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203"
rgroup.long 0xB30++0x03
line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204"
rgroup.long 0xB34++0x03
line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205"
rgroup.long 0xB38++0x03
line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206"
rgroup.long 0xB3C++0x03
line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207"
rgroup.long 0xB40++0x03
line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208"
rgroup.long 0xB44++0x03
line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209"
rgroup.long 0xB48++0x03
line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210"
rgroup.long 0xB4C++0x03
line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211"
rgroup.long 0xB50++0x03
line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212"
rgroup.long 0xB54++0x03
line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213"
rgroup.long 0xB58++0x03
line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214"
rgroup.long 0xB5C++0x03
line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215"
rgroup.long 0xB60++0x03
line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216"
rgroup.long 0xB64++0x03
line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217"
rgroup.long 0xB68++0x03
line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218"
rgroup.long 0xB6C++0x03
line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219"
rgroup.long 0xB70++0x03
line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220"
rgroup.long 0xB74++0x03
line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221"
rgroup.long 0xB78++0x03
line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222"
rgroup.long 0xB7C++0x03
line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223"
rgroup.long 0xB80++0x03
line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224"
rgroup.long 0xB84++0x03
line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225"
rgroup.long 0xB88++0x03
line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226"
rgroup.long 0xB8C++0x03
line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227"
rgroup.long 0xB90++0x03
line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228"
rgroup.long 0xB94++0x03
line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229"
rgroup.long 0xB98++0x03
line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230"
rgroup.long 0xB9C++0x03
line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231"
rgroup.long 0xBA0++0x03
line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232"
rgroup.long 0xBA4++0x03
line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233"
rgroup.long 0xBA8++0x03
line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234"
rgroup.long 0xBAC++0x03
line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235"
rgroup.long 0xBB0++0x03
line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236"
rgroup.long 0xBB4++0x03
line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237"
rgroup.long 0xBB8++0x03
line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238"
rgroup.long 0xBBC++0x03
line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239"
rgroup.long 0xBC0++0x03
line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240"
rgroup.long 0xBC4++0x03
line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241"
rgroup.long 0xBC8++0x03
line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242"
rgroup.long 0xBCC++0x03
line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243"
rgroup.long 0xBD0++0x03
line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244"
rgroup.long 0xBD4++0x03
line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245"
rgroup.long 0xBD8++0x03
line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246"
rgroup.long 0xBDC++0x03
line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247"
rgroup.long 0xBE0++0x03
line.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248"
rgroup.long 0xBE4++0x03
line.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249"
rgroup.long 0xBE8++0x03
line.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250"
rgroup.long 0xBEC++0x03
line.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251"
rgroup.long 0xBF0++0x03
line.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252"
rgroup.long 0xBF4++0x03
line.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253"
rgroup.long 0xBF8++0x03
line.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254"
endif
tree.end
width 14.
tree "Configuration Registers"
rgroup.long 0xC00++0x03
line.long 0x00 "GICD_ICFGR0,Interrupt Configuration Register"
textline "                       "
rgroup.long 0xC04++0x03
line.long 0x00 "GICD_ICFGR1,Interrupt Configuration Register"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1)
group.long 0xC08++0x03
line.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC0C++0x03
line.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC08++0x03
line.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2"
rgroup.long 0xC0C++0x03
line.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x2)
group.long 0xC10++0x03
line.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC14++0x03
line.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC10++0x03
line.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4"
rgroup.long 0xC14++0x03
line.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x3)
group.long 0xC18++0x03
line.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC1C++0x03
line.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC18++0x03
line.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6"
rgroup.long 0xC1C++0x03
line.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x4)
group.long 0xC20++0x03
line.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC24++0x03
line.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC20++0x03
line.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8"
rgroup.long 0xC24++0x03
line.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x5)
group.long 0xC28++0x03
line.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC2C++0x03
line.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC28++0x03
line.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10"
rgroup.long 0xC2C++0x03
line.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x6)
group.long 0xC30++0x03
line.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC34++0x03
line.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC30++0x03
line.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12"
rgroup.long 0xC34++0x03
line.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x7)
group.long 0xC38++0x03
line.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC3C++0x03
line.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC38++0x03
line.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14"
rgroup.long 0xC3C++0x03
line.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x8)
group.long 0xC40++0x03
line.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC44++0x03
line.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC40++0x03
line.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16"
rgroup.long 0xC44++0x03
line.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x9)
group.long 0xC48++0x03
line.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC4C++0x03
line.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC48++0x03
line.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18"
rgroup.long 0xC4C++0x03
line.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0xA)
group.long 0xC50++0x03
line.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC54++0x03
line.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC50++0x03
line.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20"
rgroup.long 0xC54++0x03
line.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0xB)
group.long 0xC58++0x03
line.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC5C++0x03
line.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC58++0x03
line.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22"
rgroup.long 0xC5C++0x03
line.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0xC)
group.long 0xC60++0x03
line.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC64++0x03
line.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC60++0x03
line.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24"
rgroup.long 0xC64++0x03
line.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0xD)
group.long 0xC68++0x03
line.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC6C++0x03
line.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC68++0x03
line.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26"
rgroup.long 0xC6C++0x03
line.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0xE)
group.long 0xC70++0x03
line.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC74++0x03
line.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC70++0x03
line.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28"
rgroup.long 0xC74++0x03
line.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0xF)
group.long 0xC78++0x03
line.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC7C++0x03
line.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC78++0x03
line.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30"
rgroup.long 0xC7C++0x03
line.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)
group.long 0xC80++0x03
line.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC84++0x03
line.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC80++0x03
line.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32"
rgroup.long 0xC84++0x03
line.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)
group.long 0xC88++0x03
line.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC8C++0x03
line.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC88++0x03
line.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34"
rgroup.long 0xC8C++0x03
line.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)
group.long 0xC90++0x03
line.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC94++0x03
line.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC90++0x03
line.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36"
rgroup.long 0xC94++0x03
line.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)
group.long 0xC98++0x03
line.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xC9C++0x03
line.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xC98++0x03
line.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38"
rgroup.long 0xC9C++0x03
line.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)
group.long 0xCA0++0x03
line.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCA4++0x03
line.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCA0++0x03
line.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40"
rgroup.long 0xCA4++0x03
line.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)
group.long 0xCA8++0x03
line.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCAC++0x03
line.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCA8++0x03
line.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42"
rgroup.long 0xCAC++0x03
line.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)
group.long 0xCB0++0x03
line.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCB4++0x03
line.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCB0++0x03
line.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44"
rgroup.long 0xCB4++0x03
line.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)
group.long 0xCB8++0x03
line.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCBC++0x03
line.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCB8++0x03
line.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46"
rgroup.long 0xCBC++0x03
line.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)
group.long 0xCC0++0x03
line.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCC4++0x03
line.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCC0++0x03
line.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48"
rgroup.long 0xCC4++0x03
line.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)
group.long 0xCC8++0x03
line.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCCC++0x03
line.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCC8++0x03
line.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50"
rgroup.long 0xCCC++0x03
line.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)
group.long 0xCD0++0x03
line.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCD4++0x03
line.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCD0++0x03
line.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52"
rgroup.long 0xCD4++0x03
line.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)
group.long 0xCD8++0x03
line.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCDC++0x03
line.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCD8++0x03
line.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54"
rgroup.long 0xCDC++0x03
line.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)
group.long 0xCE0++0x03
line.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCE4++0x03
line.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCE0++0x03
line.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56"
rgroup.long 0xCE4++0x03
line.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)
group.long 0xCE8++0x03
line.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCEC++0x03
line.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCE8++0x03
line.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58"
rgroup.long 0xCEC++0x03
line.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)
group.long 0xCF0++0x03
line.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCF4++0x03
line.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCF0++0x03
line.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60"
rgroup.long 0xCF4++0x03
line.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61"
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1F)
group.long 0xCF8++0x03
line.long 0x00 "GICD_ICFGR62,Interrupt Configuration Register 62"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
group.long 0xCFC++0x03
line.long 0x00 "GICD_ICFGR63,Interrupt Configuration Register 63"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0" "Level,Edge"
else
rgroup.long 0xCF8++0x03
line.long 0x00 "GICD_ICFGR62,Interrupt Configuration Register 62"
rgroup.long 0xCFC++0x03
line.long 0x00 "GICD_ICFGR63,Interrupt Configuration Register 63"
endif
tree.end
width 12.
tree "Peripheral Interrupt Status Registers"
rgroup.long 0x0D00++0x03
line.long 0x00 "GICD_PPISR,Private Peripheral Interrupt Status Register"
bitfld.long 0x00 15. " PPI3S     ,nIRQ pin status" "No interrupt,Interrupt"
bitfld.long 0x00 14. "  PPI2S     ,Non-secure Physical Timer event status" "No interrupt,Interrupt"
textline "                     "
bitfld.long 0x00 13. " PPI1S     ,Secure Physical Timer event status" "No interrupt,Interrupt"
bitfld.long 0x00 12. "  PPI0S     ,nFIQ pin status" "No interrupt,Interrupt"
textline "                     "
bitfld.long 0x00 11. " PPI4S     ,Virtual Timer event status" "No interrupt,Interrupt"
bitfld.long 0x00 10. "  PPI5S     ,Hypervisor Timer event status" "No interrupt,Interrupt"
textline "                     "
bitfld.long 0x00 9. " PPI6S     ,Virtual Maintenance Status" "No interrupt,Interrupt"
textline "                               "
width 22.
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x01)
rgroup.long 0x0D04++0x03
line.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 0"
bitfld.long 0x00 31. " IRQS31  ,IRQS Status Bit 31" "Low,High"
bitfld.long 0x00 30. "  IRQS30  ,IRQS Status Bit 30" "Low,High"
bitfld.long 0x00 29. "  IRQS29  ,IRQS Status Bit 29" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS28  ,IRQS Status Bit 28" "Low,High"
bitfld.long 0x00 27. "  IRQS27  ,IRQS Status Bit 27" "Low,High"
bitfld.long 0x00 26. "  IRQS26  ,IRQS Status Bit 26" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS25  ,IRQS Status Bit 25" "Low,High"
bitfld.long 0x00 24. "  IRQS24  ,IRQS Status Bit 24" "Low,High"
bitfld.long 0x00 23. "  IRQS23  ,IRQS Status Bit 23" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS22  ,IRQS Status Bit 22" "Low,High"
bitfld.long 0x00 21. "  IRQS21  ,IRQS Status Bit 21" "Low,High"
bitfld.long 0x00 20. "  IRQS20  ,IRQS Status Bit 20" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS19  ,IRQS Status Bit 19" "Low,High"
bitfld.long 0x00 18. "  IRQS18  ,IRQS Status Bit 18" "Low,High"
bitfld.long 0x00 17. "  IRQS17  ,IRQS Status Bit 17" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS16  ,IRQS Status Bit 16" "Low,High"
bitfld.long 0x00 15. "  IRQS15  ,IRQS Status Bit 15" "Low,High"
bitfld.long 0x00 14. "  IRQS14  ,IRQS Status Bit 14" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS13  ,IRQS Status Bit 13" "Low,High"
bitfld.long 0x00 12. "  IRQS12  ,IRQS Status Bit 12" "Low,High"
bitfld.long 0x00 11. "  IRQS11  ,IRQS Status Bit 11" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS10  ,IRQS Status Bit 10" "Low,High"
bitfld.long 0x00 9. "  IRQS9   ,IRQS Status Bit 9" "Low,High"
bitfld.long 0x00 8. "  IRQS8   ,IRQS Status Bit 8" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS7   ,IRQS Status Bit 7" "Low,High"
bitfld.long 0x00 6. "  IRQS6   ,IRQS Status Bit 6" "Low,High"
bitfld.long 0x00 5. "  IRQS5   ,IRQS Status Bit 5" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS4   ,IRQS Status Bit 4" "Low,High"
bitfld.long 0x00 3. "  IRQS3   ,IRQS Status Bit 3" "Low,High"
bitfld.long 0x00 2. "  IRQS2   ,IRQS Status Bit 2" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS1   ,IRQS Status Bit 1" "Low,High"
bitfld.long 0x00 0. "  IRQS0   ,IRQS Status Bit 0" "Low,High"
else
rgroup.long 0x0D04++0x03
line.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 1"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x02)
rgroup.long 0x0D08++0x03
line.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1"
bitfld.long 0x00 31. " IRQS63  ,IRQS Status Bit 63" "Low,High"
bitfld.long 0x00 30. "  IRQS62  ,IRQS Status Bit 62" "Low,High"
bitfld.long 0x00 29. "  IRQS61  ,IRQS Status Bit 61" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS60  ,IRQS Status Bit 60" "Low,High"
bitfld.long 0x00 27. "  IRQS59  ,IRQS Status Bit 59" "Low,High"
bitfld.long 0x00 26. "  IRQS58  ,IRQS Status Bit 58" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS57  ,IRQS Status Bit 57" "Low,High"
bitfld.long 0x00 24. "  IRQS56  ,IRQS Status Bit 56" "Low,High"
bitfld.long 0x00 23. "  IRQS55  ,IRQS Status Bit 55" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS54  ,IRQS Status Bit 54" "Low,High"
bitfld.long 0x00 21. "  IRQS53  ,IRQS Status Bit 53" "Low,High"
bitfld.long 0x00 20. "  IRQS52  ,IRQS Status Bit 52" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS51  ,IRQS Status Bit 51" "Low,High"
bitfld.long 0x00 18. "  IRQS50  ,IRQS Status Bit 50" "Low,High"
bitfld.long 0x00 17. "  IRQS49  ,IRQS Status Bit 49" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS48  ,IRQS Status Bit 48" "Low,High"
bitfld.long 0x00 15. "  IRQS47  ,IRQS Status Bit 47" "Low,High"
bitfld.long 0x00 14. "  IRQS46  ,IRQS Status Bit 46" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS45  ,IRQS Status Bit 45" "Low,High"
bitfld.long 0x00 12. "  IRQS44  ,IRQS Status Bit 44" "Low,High"
bitfld.long 0x00 11. "  IRQS43  ,IRQS Status Bit 43" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS42  ,IRQS Status Bit 42" "Low,High"
bitfld.long 0x00 9. "  IRQS41  ,IRQS Status Bit 41" "Low,High"
bitfld.long 0x00 8. "  IRQS40  ,IRQS Status Bit 40" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS39  ,IRQS Status Bit 39" "Low,High"
bitfld.long 0x00 6. "  IRQS38  ,IRQS Status Bit 38" "Low,High"
bitfld.long 0x00 5. "  IRQS37  ,IRQS Status Bit 37" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS36  ,IRQS Status Bit 36" "Low,High"
bitfld.long 0x00 3. "  IRQS35  ,IRQS Status Bit 35" "Low,High"
bitfld.long 0x00 2. "  IRQS34  ,IRQS Status Bit 34" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS33  ,IRQS Status Bit 33" "Low,High"
bitfld.long 0x00 0. "  IRQS32  ,IRQS Status Bit 32" "Low,High"
else
rgroup.long 0x0D08++0x03
line.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x03)
rgroup.long 0x0D0C++0x03
line.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2"
bitfld.long 0x00 31. " IRQS95  ,IRQS Status Bit 95" "Low,High"
bitfld.long 0x00 30. "  IRQS94  ,IRQS Status Bit 94" "Low,High"
bitfld.long 0x00 29. "  IRQS93  ,IRQS Status Bit 93" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS92  ,IRQS Status Bit 92" "Low,High"
bitfld.long 0x00 27. "  IRQS91  ,IRQS Status Bit 91" "Low,High"
bitfld.long 0x00 26. "  IRQS90  ,IRQS Status Bit 90" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS89  ,IRQS Status Bit 89" "Low,High"
bitfld.long 0x00 24. "  IRQS88  ,IRQS Status Bit 88" "Low,High"
bitfld.long 0x00 23. "  IRQS87  ,IRQS Status Bit 87" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS86  ,IRQS Status Bit 86" "Low,High"
bitfld.long 0x00 21. "  IRQS85  ,IRQS Status Bit 85" "Low,High"
bitfld.long 0x00 20. "  IRQS84  ,IRQS Status Bit 84" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS83  ,IRQS Status Bit 83" "Low,High"
bitfld.long 0x00 18. "  IRQS82  ,IRQS Status Bit 82" "Low,High"
bitfld.long 0x00 17. "  IRQS81  ,IRQS Status Bit 81" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS80  ,IRQS Status Bit 80" "Low,High"
bitfld.long 0x00 15. "  IRQS79  ,IRQS Status Bit 79" "Low,High"
bitfld.long 0x00 14. "  IRQS78  ,IRQS Status Bit 78" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS77  ,IRQS Status Bit 77" "Low,High"
bitfld.long 0x00 12. "  IRQS76  ,IRQS Status Bit 76" "Low,High"
bitfld.long 0x00 11. "  IRQS75  ,IRQS Status Bit 75" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS74  ,IRQS Status Bit 74" "Low,High"
bitfld.long 0x00 9. "  IRQS73  ,IRQS Status Bit 73" "Low,High"
bitfld.long 0x00 8. "  IRQS72  ,IRQS Status Bit 72" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS71  ,IRQS Status Bit 71" "Low,High"
bitfld.long 0x00 6. "  IRQS70  ,IRQS Status Bit 70" "Low,High"
bitfld.long 0x00 5. "  IRQS69  ,IRQS Status Bit 69" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS68  ,IRQS Status Bit 68" "Low,High"
bitfld.long 0x00 3. "  IRQS67  ,IRQS Status Bit 67" "Low,High"
bitfld.long 0x00 2. "  IRQS66  ,IRQS Status Bit 66" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS65  ,IRQS Status Bit 65" "Low,High"
bitfld.long 0x00 0. "  IRQS64  ,IRQS Status Bit 64" "Low,High"
else
rgroup.long 0x0D0C++0x03
line.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x04)
rgroup.long 0x0D10++0x03
line.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3"
bitfld.long 0x00 31. " IRQS127 ,IRQS Status Bit 127" "Low,High"
bitfld.long 0x00 30. "  IRQS126 ,IRQS Status Bit 126" "Low,High"
bitfld.long 0x00 29. "  IRQS125 ,IRQS Status Bit 125" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS124 ,IRQS Status Bit 124" "Low,High"
bitfld.long 0x00 27. "  IRQS123 ,IRQS Status Bit 123" "Low,High"
bitfld.long 0x00 26. "  IRQS122 ,IRQS Status Bit 122" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS121 ,IRQS Status Bit 121" "Low,High"
bitfld.long 0x00 24. "  IRQS120 ,IRQS Status Bit 120" "Low,High"
bitfld.long 0x00 23. "  IRQS119 ,IRQS Status Bit 119" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS118 ,IRQS Status Bit 118" "Low,High"
bitfld.long 0x00 21. "  IRQS117 ,IRQS Status Bit 117" "Low,High"
bitfld.long 0x00 20. "  IRQS116 ,IRQS Status Bit 116" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS115 ,IRQS Status Bit 115" "Low,High"
bitfld.long 0x00 18. "  IRQS114 ,IRQS Status Bit 114" "Low,High"
bitfld.long 0x00 17. "  IRQS113 ,IRQS Status Bit 113" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS112 ,IRQS Status Bit 112" "Low,High"
bitfld.long 0x00 15. "  IRQS111 ,IRQS Status Bit 111" "Low,High"
bitfld.long 0x00 14. "  IRQS110 ,IRQS Status Bit 110" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS109 ,IRQS Status Bit 109" "Low,High"
bitfld.long 0x00 12. "  IRQS108 ,IRQS Status Bit 108" "Low,High"
bitfld.long 0x00 11. "  IRQS107 ,IRQS Status Bit 107" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS106 ,IRQS Status Bit 106" "Low,High"
bitfld.long 0x00 9. "  IRQS105 ,IRQS Status Bit 105" "Low,High"
bitfld.long 0x00 8. "  IRQS104 ,IRQS Status Bit 104" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS103 ,IRQS Status Bit 103" "Low,High"
bitfld.long 0x00 6. "  IRQS102 ,IRQS Status Bit 102" "Low,High"
bitfld.long 0x00 5. "  IRQS101 ,IRQS Status Bit 101" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS100 ,IRQS Status Bit 100" "Low,High"
bitfld.long 0x00 3. "  IRQS99  ,IRQS Status Bit 99" "Low,High"
bitfld.long 0x00 2. "  IRQS98  ,IRQS Status Bit 98" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS97  ,IRQS Status Bit 97" "Low,High"
bitfld.long 0x00 0. "  IRQS96  ,IRQS Status Bit 96" "Low,High"
else
rgroup.long 0x0D10++0x03
line.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x05)
rgroup.long 0x0D14++0x03
line.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4"
bitfld.long 0x00 31. " IRQS159 ,IRQS Status Bit 159" "Low,High"
bitfld.long 0x00 30. "  IRQS158 ,IRQS Status Bit 158" "Low,High"
bitfld.long 0x00 29. "  IRQS157 ,IRQS Status Bit 157" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS156 ,IRQS Status Bit 156" "Low,High"
bitfld.long 0x00 27. "  IRQS155 ,IRQS Status Bit 155" "Low,High"
bitfld.long 0x00 26. "  IRQS154 ,IRQS Status Bit 154" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS153 ,IRQS Status Bit 153" "Low,High"
bitfld.long 0x00 24. "  IRQS152 ,IRQS Status Bit 152" "Low,High"
bitfld.long 0x00 23. "  IRQS151 ,IRQS Status Bit 151" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS150 ,IRQS Status Bit 150" "Low,High"
bitfld.long 0x00 21. "  IRQS149 ,IRQS Status Bit 149" "Low,High"
bitfld.long 0x00 20. "  IRQS148 ,IRQS Status Bit 148" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS147 ,IRQS Status Bit 147" "Low,High"
bitfld.long 0x00 18. "  IRQS146 ,IRQS Status Bit 146" "Low,High"
bitfld.long 0x00 17. "  IRQS145 ,IRQS Status Bit 145" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS144 ,IRQS Status Bit 144" "Low,High"
bitfld.long 0x00 15. "  IRQS143 ,IRQS Status Bit 143" "Low,High"
bitfld.long 0x00 14. "  IRQS142 ,IRQS Status Bit 142" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS141 ,IRQS Status Bit 141" "Low,High"
bitfld.long 0x00 12. "  IRQS140 ,IRQS Status Bit 140" "Low,High"
bitfld.long 0x00 11. "  IRQS139 ,IRQS Status Bit 139" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS138 ,IRQS Status Bit 138" "Low,High"
bitfld.long 0x00 9. "  IRQS137 ,IRQS Status Bit 137" "Low,High"
bitfld.long 0x00 8. "  IRQS136 ,IRQS Status Bit 136" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS135 ,IRQS Status Bit 135" "Low,High"
bitfld.long 0x00 6. "  IRQS134 ,IRQS Status Bit 134" "Low,High"
bitfld.long 0x00 5. "  IRQS133 ,IRQS Status Bit 133" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS132 ,IRQS Status Bit 132" "Low,High"
bitfld.long 0x00 3. "  IRQS131 ,IRQS Status Bit 131" "Low,High"
bitfld.long 0x00 2. "  IRQS130 ,IRQS Status Bit 130" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS129 ,IRQS Status Bit 129" "Low,High"
bitfld.long 0x00 0. "  IRQS128 ,IRQS Status Bit 128" "Low,High"
else
rgroup.long 0x0D14++0x03
line.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x06)
rgroup.long 0x0D18++0x03
line.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5"
bitfld.long 0x00 31. " IRQS191 ,IRQS Status Bit 191" "Low,High"
bitfld.long 0x00 30. "  IRQS190 ,IRQS Status Bit 190" "Low,High"
bitfld.long 0x00 29. "  IRQS189 ,IRQS Status Bit 189" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS188 ,IRQS Status Bit 188" "Low,High"
bitfld.long 0x00 27. "  IRQS187 ,IRQS Status Bit 187" "Low,High"
bitfld.long 0x00 26. "  IRQS186 ,IRQS Status Bit 186" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS185 ,IRQS Status Bit 185" "Low,High"
bitfld.long 0x00 24. "  IRQS184 ,IRQS Status Bit 184" "Low,High"
bitfld.long 0x00 23. "  IRQS183 ,IRQS Status Bit 183" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS182 ,IRQS Status Bit 182" "Low,High"
bitfld.long 0x00 21. "  IRQS181 ,IRQS Status Bit 181" "Low,High"
bitfld.long 0x00 20. "  IRQS180 ,IRQS Status Bit 180" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS179 ,IRQS Status Bit 179" "Low,High"
bitfld.long 0x00 18. "  IRQS178 ,IRQS Status Bit 178" "Low,High"
bitfld.long 0x00 17. "  IRQS177 ,IRQS Status Bit 177" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS176 ,IRQS Status Bit 176" "Low,High"
bitfld.long 0x00 15. "  IRQS175 ,IRQS Status Bit 175" "Low,High"
bitfld.long 0x00 14. "  IRQS174 ,IRQS Status Bit 174" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS173 ,IRQS Status Bit 173" "Low,High"
bitfld.long 0x00 12. "  IRQS172 ,IRQS Status Bit 172" "Low,High"
bitfld.long 0x00 11. "  IRQS171 ,IRQS Status Bit 171" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS170 ,IRQS Status Bit 170" "Low,High"
bitfld.long 0x00 9. "  IRQS169 ,IRQS Status Bit 169" "Low,High"
bitfld.long 0x00 8. "  IRQS168 ,IRQS Status Bit 168" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS167 ,IRQS Status Bit 167" "Low,High"
bitfld.long 0x00 6. "  IRQS166 ,IRQS Status Bit 166" "Low,High"
bitfld.long 0x00 5. "  IRQS165 ,IRQS Status Bit 165" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS164 ,IRQS Status Bit 164" "Low,High"
bitfld.long 0x00 3. "  IRQS163 ,IRQS Status Bit 163" "Low,High"
bitfld.long 0x00 2. "  IRQS162 ,IRQS Status Bit 162" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS161 ,IRQS Status Bit 161" "Low,High"
bitfld.long 0x00 0. "  IRQS160 ,IRQS Status Bit 160" "Low,High"
else
rgroup.long 0x0D18++0x03
line.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x07)
rgroup.long 0x0D1C++0x03
line.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6"
bitfld.long 0x00 31. " IRQS223 ,IRQS Status Bit 223" "Low,High"
bitfld.long 0x00 30. "  IRQS222 ,IRQS Status Bit 222" "Low,High"
bitfld.long 0x00 29. "  IRQS221 ,IRQS Status Bit 221" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS220 ,IRQS Status Bit 220" "Low,High"
bitfld.long 0x00 27. "  IRQS219 ,IRQS Status Bit 219" "Low,High"
bitfld.long 0x00 26. "  IRQS218 ,IRQS Status Bit 218" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS217 ,IRQS Status Bit 217" "Low,High"
bitfld.long 0x00 24. "  IRQS216 ,IRQS Status Bit 216" "Low,High"
bitfld.long 0x00 23. "  IRQS215 ,IRQS Status Bit 215" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS214 ,IRQS Status Bit 214" "Low,High"
bitfld.long 0x00 21. "  IRQS213 ,IRQS Status Bit 213" "Low,High"
bitfld.long 0x00 20. "  IRQS212 ,IRQS Status Bit 212" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS211 ,IRQS Status Bit 211" "Low,High"
bitfld.long 0x00 18. "  IRQS210 ,IRQS Status Bit 210" "Low,High"
bitfld.long 0x00 17. "  IRQS209 ,IRQS Status Bit 209" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS208 ,IRQS Status Bit 208" "Low,High"
bitfld.long 0x00 15. "  IRQS207 ,IRQS Status Bit 207" "Low,High"
bitfld.long 0x00 14. "  IRQS206 ,IRQS Status Bit 206" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS205 ,IRQS Status Bit 205" "Low,High"
bitfld.long 0x00 12. "  IRQS204 ,IRQS Status Bit 204" "Low,High"
bitfld.long 0x00 11. "  IRQS203 ,IRQS Status Bit 203" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS202 ,IRQS Status Bit 202" "Low,High"
bitfld.long 0x00 9. "  IRQS201 ,IRQS Status Bit 201" "Low,High"
bitfld.long 0x00 8. "  IRQS200 ,IRQS Status Bit 200" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS199 ,IRQS Status Bit 199" "Low,High"
bitfld.long 0x00 6. "  IRQS198 ,IRQS Status Bit 198" "Low,High"
bitfld.long 0x00 5. "  IRQS197 ,IRQS Status Bit 197" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS196 ,IRQS Status Bit 196" "Low,High"
bitfld.long 0x00 3. "  IRQS195 ,IRQS Status Bit 195" "Low,High"
bitfld.long 0x00 2. "  IRQS194 ,IRQS Status Bit 194" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS193 ,IRQS Status Bit 193" "Low,High"
bitfld.long 0x00 0. "  IRQS192 ,IRQS Status Bit 192" "Low,High"
else
rgroup.long 0x0D1C++0x03
line.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x08)
rgroup.long 0x0D20++0x03
line.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7"
bitfld.long 0x00 31. " IRQS255 ,IRQS Status Bit 255" "Low,High"
bitfld.long 0x00 30. "  IRQS254 ,IRQS Status Bit 254" "Low,High"
bitfld.long 0x00 29. "  IRQS253 ,IRQS Status Bit 253" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS252 ,IRQS Status Bit 252" "Low,High"
bitfld.long 0x00 27. "  IRQS251 ,IRQS Status Bit 251" "Low,High"
bitfld.long 0x00 26. "  IRQS250 ,IRQS Status Bit 250" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS249 ,IRQS Status Bit 249" "Low,High"
bitfld.long 0x00 24. "  IRQS248 ,IRQS Status Bit 248" "Low,High"
bitfld.long 0x00 23. "  IRQS247 ,IRQS Status Bit 247" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS246 ,IRQS Status Bit 246" "Low,High"
bitfld.long 0x00 21. "  IRQS245 ,IRQS Status Bit 245" "Low,High"
bitfld.long 0x00 20. "  IRQS244 ,IRQS Status Bit 244" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS243 ,IRQS Status Bit 243" "Low,High"
bitfld.long 0x00 18. "  IRQS242 ,IRQS Status Bit 242" "Low,High"
bitfld.long 0x00 17. "  IRQS241 ,IRQS Status Bit 241" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS240 ,IRQS Status Bit 240" "Low,High"
bitfld.long 0x00 15. "  IRQS239 ,IRQS Status Bit 239" "Low,High"
bitfld.long 0x00 14. "  IRQS238 ,IRQS Status Bit 238" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS237 ,IRQS Status Bit 237" "Low,High"
bitfld.long 0x00 12. "  IRQS236 ,IRQS Status Bit 236" "Low,High"
bitfld.long 0x00 11. "  IRQS235 ,IRQS Status Bit 235" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS234 ,IRQS Status Bit 234" "Low,High"
bitfld.long 0x00 9. "  IRQS233 ,IRQS Status Bit 233" "Low,High"
bitfld.long 0x00 8. "  IRQS232 ,IRQS Status Bit 232" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS231 ,IRQS Status Bit 231" "Low,High"
bitfld.long 0x00 6. "  IRQS230 ,IRQS Status Bit 230" "Low,High"
bitfld.long 0x00 5. "  IRQS229 ,IRQS Status Bit 229" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS228 ,IRQS Status Bit 228" "Low,High"
bitfld.long 0x00 3. "  IRQS227 ,IRQS Status Bit 227" "Low,High"
bitfld.long 0x00 2. "  IRQS226 ,IRQS Status Bit 226" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS225 ,IRQS Status Bit 225" "Low,High"
bitfld.long 0x00 0. "  IRQS224 ,IRQS Status Bit 224" "Low,High"
else
rgroup.long 0x0D20++0x03
line.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x09)
rgroup.long 0x0D24++0x03
line.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8"
bitfld.long 0x00 31. " IRQS287 ,IRQS Status Bit 287" "Low,High"
bitfld.long 0x00 30. "  IRQS286 ,IRQS Status Bit 286" "Low,High"
bitfld.long 0x00 29. "  IRQS285 ,IRQS Status Bit 285" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS284 ,IRQS Status Bit 284" "Low,High"
bitfld.long 0x00 27. "  IRQS283 ,IRQS Status Bit 283" "Low,High"
bitfld.long 0x00 26. "  IRQS282 ,IRQS Status Bit 282" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS281 ,IRQS Status Bit 281" "Low,High"
bitfld.long 0x00 24. "  IRQS280 ,IRQS Status Bit 280" "Low,High"
bitfld.long 0x00 23. "  IRQS279 ,IRQS Status Bit 279" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS278 ,IRQS Status Bit 278" "Low,High"
bitfld.long 0x00 21. "  IRQS277 ,IRQS Status Bit 277" "Low,High"
bitfld.long 0x00 20. "  IRQS276 ,IRQS Status Bit 276" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS275 ,IRQS Status Bit 275" "Low,High"
bitfld.long 0x00 18. "  IRQS274 ,IRQS Status Bit 274" "Low,High"
bitfld.long 0x00 17. "  IRQS273 ,IRQS Status Bit 273" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS272 ,IRQS Status Bit 272" "Low,High"
bitfld.long 0x00 15. "  IRQS271 ,IRQS Status Bit 271" "Low,High"
bitfld.long 0x00 14. "  IRQS270 ,IRQS Status Bit 270" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS269 ,IRQS Status Bit 269" "Low,High"
bitfld.long 0x00 12. "  IRQS268 ,IRQS Status Bit 268" "Low,High"
bitfld.long 0x00 11. "  IRQS267 ,IRQS Status Bit 267" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS266 ,IRQS Status Bit 266" "Low,High"
bitfld.long 0x00 9. "  IRQS265 ,IRQS Status Bit 265" "Low,High"
bitfld.long 0x00 8. "  IRQS264 ,IRQS Status Bit 264" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS263 ,IRQS Status Bit 263" "Low,High"
bitfld.long 0x00 6. "  IRQS262 ,IRQS Status Bit 262" "Low,High"
bitfld.long 0x00 5. "  IRQS261 ,IRQS Status Bit 261" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS260 ,IRQS Status Bit 260" "Low,High"
bitfld.long 0x00 3. "  IRQS259 ,IRQS Status Bit 259" "Low,High"
bitfld.long 0x00 2. "  IRQS258 ,IRQS Status Bit 258" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS257 ,IRQS Status Bit 257" "Low,High"
bitfld.long 0x00 0. "  IRQS256 ,IRQS Status Bit 256" "Low,High"
else
rgroup.long 0x0D24++0x03
line.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0A)
rgroup.long 0x0D28++0x03
line.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9"
bitfld.long 0x00 31. " IRQS319 ,IRQS Status Bit 319" "Low,High"
bitfld.long 0x00 30. "  IRQS318 ,IRQS Status Bit 318" "Low,High"
bitfld.long 0x00 29. "  IRQS317 ,IRQS Status Bit 317" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS316 ,IRQS Status Bit 316" "Low,High"
bitfld.long 0x00 27. "  IRQS315 ,IRQS Status Bit 315" "Low,High"
bitfld.long 0x00 26. "  IRQS314 ,IRQS Status Bit 314" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS313 ,IRQS Status Bit 313" "Low,High"
bitfld.long 0x00 24. "  IRQS312 ,IRQS Status Bit 312" "Low,High"
bitfld.long 0x00 23. "  IRQS311 ,IRQS Status Bit 311" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS310 ,IRQS Status Bit 310" "Low,High"
bitfld.long 0x00 21. "  IRQS309 ,IRQS Status Bit 309" "Low,High"
bitfld.long 0x00 20. "  IRQS308 ,IRQS Status Bit 308" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS307 ,IRQS Status Bit 307" "Low,High"
bitfld.long 0x00 18. "  IRQS306 ,IRQS Status Bit 306" "Low,High"
bitfld.long 0x00 17. "  IRQS305 ,IRQS Status Bit 305" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS304 ,IRQS Status Bit 304" "Low,High"
bitfld.long 0x00 15. "  IRQS303 ,IRQS Status Bit 303" "Low,High"
bitfld.long 0x00 14. "  IRQS302 ,IRQS Status Bit 302" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS301 ,IRQS Status Bit 301" "Low,High"
bitfld.long 0x00 12. "  IRQS300 ,IRQS Status Bit 300" "Low,High"
bitfld.long 0x00 11. "  IRQS299 ,IRQS Status Bit 299" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS298 ,IRQS Status Bit 298" "Low,High"
bitfld.long 0x00 9. "  IRQS297 ,IRQS Status Bit 297" "Low,High"
bitfld.long 0x00 8. "  IRQS296 ,IRQS Status Bit 296" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS295 ,IRQS Status Bit 295" "Low,High"
bitfld.long 0x00 6. "  IRQS294 ,IRQS Status Bit 294" "Low,High"
bitfld.long 0x00 5. "  IRQS293 ,IRQS Status Bit 293" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS292 ,IRQS Status Bit 292" "Low,High"
bitfld.long 0x00 3. "  IRQS291 ,IRQS Status Bit 291" "Low,High"
bitfld.long 0x00 2. "  IRQS290 ,IRQS Status Bit 290" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS289 ,IRQS Status Bit 289" "Low,High"
bitfld.long 0x00 0. "  IRQS288 ,IRQS Status Bit 288" "Low,High"
else
rgroup.long 0x0D28++0x03
line.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0B)
rgroup.long 0x0D2C++0x03
line.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10"
bitfld.long 0x00 31. " IRQS351 ,IRQS Status Bit 351" "Low,High"
bitfld.long 0x00 30. "  IRQS350 ,IRQS Status Bit 350" "Low,High"
bitfld.long 0x00 29. "  IRQS349 ,IRQS Status Bit 349" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS348 ,IRQS Status Bit 348" "Low,High"
bitfld.long 0x00 27. "  IRQS347 ,IRQS Status Bit 347" "Low,High"
bitfld.long 0x00 26. "  IRQS346 ,IRQS Status Bit 346" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS345 ,IRQS Status Bit 345" "Low,High"
bitfld.long 0x00 24. "  IRQS344 ,IRQS Status Bit 344" "Low,High"
bitfld.long 0x00 23. "  IRQS343 ,IRQS Status Bit 343" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS342 ,IRQS Status Bit 342" "Low,High"
bitfld.long 0x00 21. "  IRQS341 ,IRQS Status Bit 341" "Low,High"
bitfld.long 0x00 20. "  IRQS340 ,IRQS Status Bit 340" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS339 ,IRQS Status Bit 339" "Low,High"
bitfld.long 0x00 18. "  IRQS338 ,IRQS Status Bit 338" "Low,High"
bitfld.long 0x00 17. "  IRQS337 ,IRQS Status Bit 337" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS336 ,IRQS Status Bit 336" "Low,High"
bitfld.long 0x00 15. "  IRQS335 ,IRQS Status Bit 335" "Low,High"
bitfld.long 0x00 14. "  IRQS334 ,IRQS Status Bit 334" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS333 ,IRQS Status Bit 333" "Low,High"
bitfld.long 0x00 12. "  IRQS332 ,IRQS Status Bit 332" "Low,High"
bitfld.long 0x00 11. "  IRQS331 ,IRQS Status Bit 331" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS330 ,IRQS Status Bit 330" "Low,High"
bitfld.long 0x00 9. "  IRQS329 ,IRQS Status Bit 329" "Low,High"
bitfld.long 0x00 8. "  IRQS328 ,IRQS Status Bit 328" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS327 ,IRQS Status Bit 327" "Low,High"
bitfld.long 0x00 6. "  IRQS326 ,IRQS Status Bit 326" "Low,High"
bitfld.long 0x00 5. "  IRQS325 ,IRQS Status Bit 325" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS324 ,IRQS Status Bit 324" "Low,High"
bitfld.long 0x00 3. "  IRQS323 ,IRQS Status Bit 323" "Low,High"
bitfld.long 0x00 2. "  IRQS322 ,IRQS Status Bit 322" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS321 ,IRQS Status Bit 321" "Low,High"
bitfld.long 0x00 0. "  IRQS320 ,IRQS Status Bit 320" "Low,High"
else
rgroup.long 0x0D2C++0x03
line.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0C)
rgroup.long 0x0D30++0x03
line.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11"
bitfld.long 0x00 31. " IRQS383 ,IRQS Status Bit 383" "Low,High"
bitfld.long 0x00 30. "  IRQS382 ,IRQS Status Bit 382" "Low,High"
bitfld.long 0x00 29. "  IRQS381 ,IRQS Status Bit 381" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS380 ,IRQS Status Bit 380" "Low,High"
bitfld.long 0x00 27. "  IRQS379 ,IRQS Status Bit 379" "Low,High"
bitfld.long 0x00 26. "  IRQS378 ,IRQS Status Bit 378" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS377 ,IRQS Status Bit 377" "Low,High"
bitfld.long 0x00 24. "  IRQS376 ,IRQS Status Bit 376" "Low,High"
bitfld.long 0x00 23. "  IRQS375 ,IRQS Status Bit 375" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS374 ,IRQS Status Bit 374" "Low,High"
bitfld.long 0x00 21. "  IRQS373 ,IRQS Status Bit 373" "Low,High"
bitfld.long 0x00 20. "  IRQS372 ,IRQS Status Bit 372" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS371 ,IRQS Status Bit 371" "Low,High"
bitfld.long 0x00 18. "  IRQS370 ,IRQS Status Bit 370" "Low,High"
bitfld.long 0x00 17. "  IRQS369 ,IRQS Status Bit 369" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS368 ,IRQS Status Bit 368" "Low,High"
bitfld.long 0x00 15. "  IRQS367 ,IRQS Status Bit 367" "Low,High"
bitfld.long 0x00 14. "  IRQS366 ,IRQS Status Bit 366" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS365 ,IRQS Status Bit 365" "Low,High"
bitfld.long 0x00 12. "  IRQS364 ,IRQS Status Bit 364" "Low,High"
bitfld.long 0x00 11. "  IRQS363 ,IRQS Status Bit 363" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS362 ,IRQS Status Bit 362" "Low,High"
bitfld.long 0x00 9. "  IRQS361 ,IRQS Status Bit 361" "Low,High"
bitfld.long 0x00 8. "  IRQS360 ,IRQS Status Bit 360" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS359 ,IRQS Status Bit 359" "Low,High"
bitfld.long 0x00 6. "  IRQS358 ,IRQS Status Bit 358" "Low,High"
bitfld.long 0x00 5. "  IRQS357 ,IRQS Status Bit 357" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS356 ,IRQS Status Bit 356" "Low,High"
bitfld.long 0x00 3. "  IRQS355 ,IRQS Status Bit 355" "Low,High"
bitfld.long 0x00 2. "  IRQS354 ,IRQS Status Bit 354" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS353 ,IRQS Status Bit 353" "Low,High"
bitfld.long 0x00 0. "  IRQS352 ,IRQS Status Bit 352" "Low,High"
else
rgroup.long 0x0D30++0x03
line.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0D)
rgroup.long 0x0D34++0x03
line.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12"
bitfld.long 0x00 31. " IRQS415 ,IRQS Status Bit 415" "Low,High"
bitfld.long 0x00 30. "  IRQS414 ,IRQS Status Bit 414" "Low,High"
bitfld.long 0x00 29. "  IRQS413 ,IRQS Status Bit 413" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS412 ,IRQS Status Bit 412" "Low,High"
bitfld.long 0x00 27. "  IRQS411 ,IRQS Status Bit 411" "Low,High"
bitfld.long 0x00 26. "  IRQS410 ,IRQS Status Bit 410" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS409 ,IRQS Status Bit 409" "Low,High"
bitfld.long 0x00 24. "  IRQS408 ,IRQS Status Bit 408" "Low,High"
bitfld.long 0x00 23. "  IRQS407 ,IRQS Status Bit 407" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS406 ,IRQS Status Bit 406" "Low,High"
bitfld.long 0x00 21. "  IRQS405 ,IRQS Status Bit 405" "Low,High"
bitfld.long 0x00 20. "  IRQS404 ,IRQS Status Bit 404" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS403 ,IRQS Status Bit 403" "Low,High"
bitfld.long 0x00 18. "  IRQS402 ,IRQS Status Bit 402" "Low,High"
bitfld.long 0x00 17. "  IRQS401 ,IRQS Status Bit 401" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS400 ,IRQS Status Bit 400" "Low,High"
bitfld.long 0x00 15. "  IRQS399 ,IRQS Status Bit 399" "Low,High"
bitfld.long 0x00 14. "  IRQS398 ,IRQS Status Bit 398" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS397 ,IRQS Status Bit 397" "Low,High"
bitfld.long 0x00 12. "  IRQS396 ,IRQS Status Bit 396" "Low,High"
bitfld.long 0x00 11. "  IRQS395 ,IRQS Status Bit 395" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS394 ,IRQS Status Bit 394" "Low,High"
bitfld.long 0x00 9. "  IRQS393 ,IRQS Status Bit 393" "Low,High"
bitfld.long 0x00 8. "  IRQS392 ,IRQS Status Bit 392" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS391 ,IRQS Status Bit 391" "Low,High"
bitfld.long 0x00 6. "  IRQS390 ,IRQS Status Bit 390" "Low,High"
bitfld.long 0x00 5. "  IRQS389 ,IRQS Status Bit 389" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS388 ,IRQS Status Bit 388" "Low,High"
bitfld.long 0x00 3. "  IRQS387 ,IRQS Status Bit 387" "Low,High"
bitfld.long 0x00 2. "  IRQS386 ,IRQS Status Bit 386" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS385 ,IRQS Status Bit 385" "Low,High"
bitfld.long 0x00 0. "  IRQS384 ,IRQS Status Bit 384" "Low,High"
else
rgroup.long 0x0D34++0x03
line.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0E)
rgroup.long 0x0D38++0x03
line.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13"
bitfld.long 0x00 31. " IRQS447 ,IRQS Status Bit 447" "Low,High"
bitfld.long 0x00 30. "  IRQS446 ,IRQS Status Bit 446" "Low,High"
bitfld.long 0x00 29. "  IRQS445 ,IRQS Status Bit 445" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS444 ,IRQS Status Bit 444" "Low,High"
bitfld.long 0x00 27. "  IRQS443 ,IRQS Status Bit 443" "Low,High"
bitfld.long 0x00 26. "  IRQS442 ,IRQS Status Bit 442" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS441 ,IRQS Status Bit 441" "Low,High"
bitfld.long 0x00 24. "  IRQS440 ,IRQS Status Bit 440" "Low,High"
bitfld.long 0x00 23. "  IRQS439 ,IRQS Status Bit 439" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS438 ,IRQS Status Bit 438" "Low,High"
bitfld.long 0x00 21. "  IRQS437 ,IRQS Status Bit 437" "Low,High"
bitfld.long 0x00 20. "  IRQS436 ,IRQS Status Bit 436" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS435 ,IRQS Status Bit 435" "Low,High"
bitfld.long 0x00 18. "  IRQS434 ,IRQS Status Bit 434" "Low,High"
bitfld.long 0x00 17. "  IRQS433 ,IRQS Status Bit 433" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS432 ,IRQS Status Bit 432" "Low,High"
bitfld.long 0x00 15. "  IRQS431 ,IRQS Status Bit 431" "Low,High"
bitfld.long 0x00 14. "  IRQS430 ,IRQS Status Bit 430" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS429 ,IRQS Status Bit 429" "Low,High"
bitfld.long 0x00 12. "  IRQS428 ,IRQS Status Bit 428" "Low,High"
bitfld.long 0x00 11. "  IRQS427 ,IRQS Status Bit 427" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS426 ,IRQS Status Bit 426" "Low,High"
bitfld.long 0x00 9. "  IRQS425 ,IRQS Status Bit 425" "Low,High"
bitfld.long 0x00 8. "  IRQS424 ,IRQS Status Bit 424" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS423 ,IRQS Status Bit 423" "Low,High"
bitfld.long 0x00 6. "  IRQS422 ,IRQS Status Bit 422" "Low,High"
bitfld.long 0x00 5. "  IRQS421 ,IRQS Status Bit 421" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS420 ,IRQS Status Bit 420" "Low,High"
bitfld.long 0x00 3. "  IRQS419 ,IRQS Status Bit 419" "Low,High"
bitfld.long 0x00 2. "  IRQS418 ,IRQS Status Bit 418" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS417 ,IRQS Status Bit 417" "Low,High"
bitfld.long 0x00 0. "  IRQS416 ,IRQS Status Bit 416" "Low,High"
else
rgroup.long 0x0D38++0x03
line.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x0F)
rgroup.long 0x0D3C++0x03
line.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14"
bitfld.long 0x00 31. " IRQS479 ,IRQS Status Bit 479" "Low,High"
bitfld.long 0x00 30. "  IRQS478 ,IRQS Status Bit 478" "Low,High"
bitfld.long 0x00 29. "  IRQS477 ,IRQS Status Bit 477" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS476 ,IRQS Status Bit 476" "Low,High"
bitfld.long 0x00 27. "  IRQS475 ,IRQS Status Bit 475" "Low,High"
bitfld.long 0x00 26. "  IRQS474 ,IRQS Status Bit 474" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS473 ,IRQS Status Bit 473" "Low,High"
bitfld.long 0x00 24. "  IRQS472 ,IRQS Status Bit 472" "Low,High"
bitfld.long 0x00 23. "  IRQS471 ,IRQS Status Bit 471" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS470 ,IRQS Status Bit 470" "Low,High"
bitfld.long 0x00 21. "  IRQS469 ,IRQS Status Bit 469" "Low,High"
bitfld.long 0x00 20. "  IRQS468 ,IRQS Status Bit 468" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS467 ,IRQS Status Bit 467" "Low,High"
bitfld.long 0x00 18. "  IRQS466 ,IRQS Status Bit 466" "Low,High"
bitfld.long 0x00 17. "  IRQS465 ,IRQS Status Bit 465" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS464 ,IRQS Status Bit 464" "Low,High"
bitfld.long 0x00 15. "  IRQS463 ,IRQS Status Bit 463" "Low,High"
bitfld.long 0x00 14. "  IRQS462 ,IRQS Status Bit 462" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS461 ,IRQS Status Bit 461" "Low,High"
bitfld.long 0x00 12. "  IRQS460 ,IRQS Status Bit 460" "Low,High"
bitfld.long 0x00 11. "  IRQS459 ,IRQS Status Bit 459" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS458 ,IRQS Status Bit 458" "Low,High"
bitfld.long 0x00 9. "  IRQS457 ,IRQS Status Bit 457" "Low,High"
bitfld.long 0x00 8. "  IRQS456 ,IRQS Status Bit 456" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS455 ,IRQS Status Bit 455" "Low,High"
bitfld.long 0x00 6. "  IRQS454 ,IRQS Status Bit 454" "Low,High"
bitfld.long 0x00 5. "  IRQS453 ,IRQS Status Bit 453" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS452 ,IRQS Status Bit 452" "Low,High"
bitfld.long 0x00 3. "  IRQS451 ,IRQS Status Bit 451" "Low,High"
bitfld.long 0x00 2. "  IRQS450 ,IRQS Status Bit 450" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS449 ,IRQS Status Bit 449" "Low,High"
bitfld.long 0x00 0. "  IRQS448 ,IRQS Status Bit 448" "Low,High"
else
rgroup.long 0x0D3C++0x03
line.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x10)
rgroup.long 0x0D40++0x03
line.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15"
bitfld.long 0x00 31. " IRQS511 ,IRQS Status Bit 511" "Low,High"
bitfld.long 0x00 30. "  IRQS510 ,IRQS Status Bit 510" "Low,High"
bitfld.long 0x00 29. "  IRQS509 ,IRQS Status Bit 509" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS508 ,IRQS Status Bit 508" "Low,High"
bitfld.long 0x00 27. "  IRQS507 ,IRQS Status Bit 507" "Low,High"
bitfld.long 0x00 26. "  IRQS506 ,IRQS Status Bit 506" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS505 ,IRQS Status Bit 505" "Low,High"
bitfld.long 0x00 24. "  IRQS504 ,IRQS Status Bit 504" "Low,High"
bitfld.long 0x00 23. "  IRQS503 ,IRQS Status Bit 503" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS502 ,IRQS Status Bit 502" "Low,High"
bitfld.long 0x00 21. "  IRQS501 ,IRQS Status Bit 501" "Low,High"
bitfld.long 0x00 20. "  IRQS500 ,IRQS Status Bit 500" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS499 ,IRQS Status Bit 499" "Low,High"
bitfld.long 0x00 18. "  IRQS498 ,IRQS Status Bit 498" "Low,High"
bitfld.long 0x00 17. "  IRQS497 ,IRQS Status Bit 497" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS496 ,IRQS Status Bit 496" "Low,High"
bitfld.long 0x00 15. "  IRQS495 ,IRQS Status Bit 495" "Low,High"
bitfld.long 0x00 14. "  IRQS494 ,IRQS Status Bit 494" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS493 ,IRQS Status Bit 493" "Low,High"
bitfld.long 0x00 12. "  IRQS492 ,IRQS Status Bit 492" "Low,High"
bitfld.long 0x00 11. "  IRQS491 ,IRQS Status Bit 491" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS490 ,IRQS Status Bit 490" "Low,High"
bitfld.long 0x00 9. "  IRQS489 ,IRQS Status Bit 489" "Low,High"
bitfld.long 0x00 8. "  IRQS488 ,IRQS Status Bit 488" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS487 ,IRQS Status Bit 487" "Low,High"
bitfld.long 0x00 6. "  IRQS486 ,IRQS Status Bit 486" "Low,High"
bitfld.long 0x00 5. "  IRQS485 ,IRQS Status Bit 485" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS484 ,IRQS Status Bit 484" "Low,High"
bitfld.long 0x00 3. "  IRQS483 ,IRQS Status Bit 483" "Low,High"
bitfld.long 0x00 2. "  IRQS482 ,IRQS Status Bit 482" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS481 ,IRQS Status Bit 481" "Low,High"
bitfld.long 0x00 0. "  IRQS480 ,IRQS Status Bit 480" "Low,High"
else
rgroup.long 0x0D40++0x03
line.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x11)
rgroup.long 0x0D44++0x03
line.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16"
bitfld.long 0x00 31. " IRQS543 ,IRQS Status Bit 543" "Low,High"
bitfld.long 0x00 30. "  IRQS542 ,IRQS Status Bit 542" "Low,High"
bitfld.long 0x00 29. "  IRQS541 ,IRQS Status Bit 541" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS540 ,IRQS Status Bit 540" "Low,High"
bitfld.long 0x00 27. "  IRQS539 ,IRQS Status Bit 539" "Low,High"
bitfld.long 0x00 26. "  IRQS538 ,IRQS Status Bit 538" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS537 ,IRQS Status Bit 537" "Low,High"
bitfld.long 0x00 24. "  IRQS536 ,IRQS Status Bit 536" "Low,High"
bitfld.long 0x00 23. "  IRQS535 ,IRQS Status Bit 535" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS534 ,IRQS Status Bit 534" "Low,High"
bitfld.long 0x00 21. "  IRQS533 ,IRQS Status Bit 533" "Low,High"
bitfld.long 0x00 20. "  IRQS532 ,IRQS Status Bit 532" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS531 ,IRQS Status Bit 531" "Low,High"
bitfld.long 0x00 18. "  IRQS530 ,IRQS Status Bit 530" "Low,High"
bitfld.long 0x00 17. "  IRQS529 ,IRQS Status Bit 529" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS528 ,IRQS Status Bit 528" "Low,High"
bitfld.long 0x00 15. "  IRQS527 ,IRQS Status Bit 527" "Low,High"
bitfld.long 0x00 14. "  IRQS526 ,IRQS Status Bit 526" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS525 ,IRQS Status Bit 525" "Low,High"
bitfld.long 0x00 12. "  IRQS524 ,IRQS Status Bit 524" "Low,High"
bitfld.long 0x00 11. "  IRQS523 ,IRQS Status Bit 523" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS522 ,IRQS Status Bit 522" "Low,High"
bitfld.long 0x00 9. "  IRQS521 ,IRQS Status Bit 521" "Low,High"
bitfld.long 0x00 8. "  IRQS520 ,IRQS Status Bit 520" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS519 ,IRQS Status Bit 519" "Low,High"
bitfld.long 0x00 6. "  IRQS518 ,IRQS Status Bit 518" "Low,High"
bitfld.long 0x00 5. "  IRQS517 ,IRQS Status Bit 517" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS516 ,IRQS Status Bit 516" "Low,High"
bitfld.long 0x00 3. "  IRQS515 ,IRQS Status Bit 515" "Low,High"
bitfld.long 0x00 2. "  IRQS514 ,IRQS Status Bit 514" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS513 ,IRQS Status Bit 513" "Low,High"
bitfld.long 0x00 0. "  IRQS512 ,IRQS Status Bit 512" "Low,High"
else
rgroup.long 0x0D44++0x03
line.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x12)
rgroup.long 0x0D48++0x03
line.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17"
bitfld.long 0x00 31. " IRQS575 ,IRQS Status Bit 575" "Low,High"
bitfld.long 0x00 30. "  IRQS574 ,IRQS Status Bit 574" "Low,High"
bitfld.long 0x00 29. "  IRQS573 ,IRQS Status Bit 573" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS572 ,IRQS Status Bit 572" "Low,High"
bitfld.long 0x00 27. "  IRQS571 ,IRQS Status Bit 571" "Low,High"
bitfld.long 0x00 26. "  IRQS570 ,IRQS Status Bit 570" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS569 ,IRQS Status Bit 569" "Low,High"
bitfld.long 0x00 24. "  IRQS568 ,IRQS Status Bit 568" "Low,High"
bitfld.long 0x00 23. "  IRQS567 ,IRQS Status Bit 567" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS566 ,IRQS Status Bit 566" "Low,High"
bitfld.long 0x00 21. "  IRQS565 ,IRQS Status Bit 565" "Low,High"
bitfld.long 0x00 20. "  IRQS564 ,IRQS Status Bit 564" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS563 ,IRQS Status Bit 563" "Low,High"
bitfld.long 0x00 18. "  IRQS562 ,IRQS Status Bit 562" "Low,High"
bitfld.long 0x00 17. "  IRQS561 ,IRQS Status Bit 561" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS560 ,IRQS Status Bit 560" "Low,High"
bitfld.long 0x00 15. "  IRQS559 ,IRQS Status Bit 559" "Low,High"
bitfld.long 0x00 14. "  IRQS558 ,IRQS Status Bit 558" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS557 ,IRQS Status Bit 557" "Low,High"
bitfld.long 0x00 12. "  IRQS556 ,IRQS Status Bit 556" "Low,High"
bitfld.long 0x00 11. "  IRQS555 ,IRQS Status Bit 555" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS554 ,IRQS Status Bit 554" "Low,High"
bitfld.long 0x00 9. "  IRQS553 ,IRQS Status Bit 553" "Low,High"
bitfld.long 0x00 8. "  IRQS552 ,IRQS Status Bit 552" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS551 ,IRQS Status Bit 551" "Low,High"
bitfld.long 0x00 6. "  IRQS550 ,IRQS Status Bit 550" "Low,High"
bitfld.long 0x00 5. "  IRQS549 ,IRQS Status Bit 549" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS548 ,IRQS Status Bit 548" "Low,High"
bitfld.long 0x00 3. "  IRQS547 ,IRQS Status Bit 547" "Low,High"
bitfld.long 0x00 2. "  IRQS546 ,IRQS Status Bit 546" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS545 ,IRQS Status Bit 545" "Low,High"
bitfld.long 0x00 0. "  IRQS544 ,IRQS Status Bit 544" "Low,High"
else
rgroup.long 0x0D48++0x03
line.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x13)
rgroup.long 0x0D4C++0x03
line.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18"
bitfld.long 0x00 31. " IRQS607 ,IRQS Status Bit 607" "Low,High"
bitfld.long 0x00 30. "  IRQS606 ,IRQS Status Bit 606" "Low,High"
bitfld.long 0x00 29. "  IRQS605 ,IRQS Status Bit 605" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS604 ,IRQS Status Bit 604" "Low,High"
bitfld.long 0x00 27. "  IRQS603 ,IRQS Status Bit 603" "Low,High"
bitfld.long 0x00 26. "  IRQS602 ,IRQS Status Bit 602" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS601 ,IRQS Status Bit 601" "Low,High"
bitfld.long 0x00 24. "  IRQS600 ,IRQS Status Bit 600" "Low,High"
bitfld.long 0x00 23. "  IRQS599 ,IRQS Status Bit 599" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS598 ,IRQS Status Bit 598" "Low,High"
bitfld.long 0x00 21. "  IRQS597 ,IRQS Status Bit 597" "Low,High"
bitfld.long 0x00 20. "  IRQS596 ,IRQS Status Bit 596" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS595 ,IRQS Status Bit 595" "Low,High"
bitfld.long 0x00 18. "  IRQS594 ,IRQS Status Bit 594" "Low,High"
bitfld.long 0x00 17. "  IRQS593 ,IRQS Status Bit 593" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS592 ,IRQS Status Bit 592" "Low,High"
bitfld.long 0x00 15. "  IRQS591 ,IRQS Status Bit 591" "Low,High"
bitfld.long 0x00 14. "  IRQS590 ,IRQS Status Bit 590" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS589 ,IRQS Status Bit 589" "Low,High"
bitfld.long 0x00 12. "  IRQS588 ,IRQS Status Bit 588" "Low,High"
bitfld.long 0x00 11. "  IRQS587 ,IRQS Status Bit 587" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS586 ,IRQS Status Bit 586" "Low,High"
bitfld.long 0x00 9. "  IRQS585 ,IRQS Status Bit 585" "Low,High"
bitfld.long 0x00 8. "  IRQS584 ,IRQS Status Bit 584" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS583 ,IRQS Status Bit 583" "Low,High"
bitfld.long 0x00 6. "  IRQS582 ,IRQS Status Bit 582" "Low,High"
bitfld.long 0x00 5. "  IRQS581 ,IRQS Status Bit 581" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS580 ,IRQS Status Bit 580" "Low,High"
bitfld.long 0x00 3. "  IRQS579 ,IRQS Status Bit 579" "Low,High"
bitfld.long 0x00 2. "  IRQS578 ,IRQS Status Bit 578" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS577 ,IRQS Status Bit 577" "Low,High"
bitfld.long 0x00 0. "  IRQS576 ,IRQS Status Bit 576" "Low,High"
else
rgroup.long 0x0D4C++0x03
line.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x14)
rgroup.long 0x0D50++0x03
line.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19"
bitfld.long 0x00 31. " IRQS639 ,IRQS Status Bit 639" "Low,High"
bitfld.long 0x00 30. "  IRQS638 ,IRQS Status Bit 638" "Low,High"
bitfld.long 0x00 29. "  IRQS637 ,IRQS Status Bit 637" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS636 ,IRQS Status Bit 636" "Low,High"
bitfld.long 0x00 27. "  IRQS635 ,IRQS Status Bit 635" "Low,High"
bitfld.long 0x00 26. "  IRQS634 ,IRQS Status Bit 634" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS633 ,IRQS Status Bit 633" "Low,High"
bitfld.long 0x00 24. "  IRQS632 ,IRQS Status Bit 632" "Low,High"
bitfld.long 0x00 23. "  IRQS631 ,IRQS Status Bit 631" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS630 ,IRQS Status Bit 630" "Low,High"
bitfld.long 0x00 21. "  IRQS629 ,IRQS Status Bit 629" "Low,High"
bitfld.long 0x00 20. "  IRQS628 ,IRQS Status Bit 628" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS627 ,IRQS Status Bit 627" "Low,High"
bitfld.long 0x00 18. "  IRQS626 ,IRQS Status Bit 626" "Low,High"
bitfld.long 0x00 17. "  IRQS625 ,IRQS Status Bit 625" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS624 ,IRQS Status Bit 624" "Low,High"
bitfld.long 0x00 15. "  IRQS623 ,IRQS Status Bit 623" "Low,High"
bitfld.long 0x00 14. "  IRQS622 ,IRQS Status Bit 622" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS621 ,IRQS Status Bit 621" "Low,High"
bitfld.long 0x00 12. "  IRQS620 ,IRQS Status Bit 620" "Low,High"
bitfld.long 0x00 11. "  IRQS619 ,IRQS Status Bit 619" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS618 ,IRQS Status Bit 618" "Low,High"
bitfld.long 0x00 9. "  IRQS617 ,IRQS Status Bit 617" "Low,High"
bitfld.long 0x00 8. "  IRQS616 ,IRQS Status Bit 616" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS615 ,IRQS Status Bit 615" "Low,High"
bitfld.long 0x00 6. "  IRQS614 ,IRQS Status Bit 614" "Low,High"
bitfld.long 0x00 5. "  IRQS613 ,IRQS Status Bit 613" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS612 ,IRQS Status Bit 612" "Low,High"
bitfld.long 0x00 3. "  IRQS611 ,IRQS Status Bit 611" "Low,High"
bitfld.long 0x00 2. "  IRQS610 ,IRQS Status Bit 610" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS609 ,IRQS Status Bit 609" "Low,High"
bitfld.long 0x00 0. "  IRQS608 ,IRQS Status Bit 608" "Low,High"
else
rgroup.long 0x0D50++0x03
line.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x15)
rgroup.long 0x0D54++0x03
line.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20"
bitfld.long 0x00 31. " IRQS671 ,IRQS Status Bit 671" "Low,High"
bitfld.long 0x00 30. "  IRQS670 ,IRQS Status Bit 670" "Low,High"
bitfld.long 0x00 29. "  IRQS669 ,IRQS Status Bit 669" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS668 ,IRQS Status Bit 668" "Low,High"
bitfld.long 0x00 27. "  IRQS667 ,IRQS Status Bit 667" "Low,High"
bitfld.long 0x00 26. "  IRQS666 ,IRQS Status Bit 666" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS665 ,IRQS Status Bit 665" "Low,High"
bitfld.long 0x00 24. "  IRQS664 ,IRQS Status Bit 664" "Low,High"
bitfld.long 0x00 23. "  IRQS663 ,IRQS Status Bit 663" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS662 ,IRQS Status Bit 662" "Low,High"
bitfld.long 0x00 21. "  IRQS661 ,IRQS Status Bit 661" "Low,High"
bitfld.long 0x00 20. "  IRQS660 ,IRQS Status Bit 660" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS659 ,IRQS Status Bit 659" "Low,High"
bitfld.long 0x00 18. "  IRQS658 ,IRQS Status Bit 658" "Low,High"
bitfld.long 0x00 17. "  IRQS657 ,IRQS Status Bit 657" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS656 ,IRQS Status Bit 656" "Low,High"
bitfld.long 0x00 15. "  IRQS655 ,IRQS Status Bit 655" "Low,High"
bitfld.long 0x00 14. "  IRQS654 ,IRQS Status Bit 654" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS653 ,IRQS Status Bit 653" "Low,High"
bitfld.long 0x00 12. "  IRQS652 ,IRQS Status Bit 652" "Low,High"
bitfld.long 0x00 11. "  IRQS651 ,IRQS Status Bit 651" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS650 ,IRQS Status Bit 650" "Low,High"
bitfld.long 0x00 9. "  IRQS649 ,IRQS Status Bit 649" "Low,High"
bitfld.long 0x00 8. "  IRQS648 ,IRQS Status Bit 648" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS647 ,IRQS Status Bit 647" "Low,High"
bitfld.long 0x00 6. "  IRQS646 ,IRQS Status Bit 646" "Low,High"
bitfld.long 0x00 5. "  IRQS645 ,IRQS Status Bit 645" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS644 ,IRQS Status Bit 644" "Low,High"
bitfld.long 0x00 3. "  IRQS643 ,IRQS Status Bit 643" "Low,High"
bitfld.long 0x00 2. "  IRQS642 ,IRQS Status Bit 642" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS641 ,IRQS Status Bit 641" "Low,High"
bitfld.long 0x00 0. "  IRQS640 ,IRQS Status Bit 640" "Low,High"
else
rgroup.long 0x0D54++0x03
line.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x16)
rgroup.long 0x0D58++0x03
line.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21"
bitfld.long 0x00 31. " IRQS703 ,IRQS Status Bit 703" "Low,High"
bitfld.long 0x00 30. "  IRQS702 ,IRQS Status Bit 702" "Low,High"
bitfld.long 0x00 29. "  IRQS701 ,IRQS Status Bit 701" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS700 ,IRQS Status Bit 700" "Low,High"
bitfld.long 0x00 27. "  IRQS699 ,IRQS Status Bit 699" "Low,High"
bitfld.long 0x00 26. "  IRQS698 ,IRQS Status Bit 698" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS697 ,IRQS Status Bit 697" "Low,High"
bitfld.long 0x00 24. "  IRQS696 ,IRQS Status Bit 696" "Low,High"
bitfld.long 0x00 23. "  IRQS695 ,IRQS Status Bit 695" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS694 ,IRQS Status Bit 694" "Low,High"
bitfld.long 0x00 21. "  IRQS693 ,IRQS Status Bit 693" "Low,High"
bitfld.long 0x00 20. "  IRQS692 ,IRQS Status Bit 692" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS691 ,IRQS Status Bit 691" "Low,High"
bitfld.long 0x00 18. "  IRQS690 ,IRQS Status Bit 690" "Low,High"
bitfld.long 0x00 17. "  IRQS689 ,IRQS Status Bit 689" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS688 ,IRQS Status Bit 688" "Low,High"
bitfld.long 0x00 15. "  IRQS687 ,IRQS Status Bit 687" "Low,High"
bitfld.long 0x00 14. "  IRQS686 ,IRQS Status Bit 686" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS685 ,IRQS Status Bit 685" "Low,High"
bitfld.long 0x00 12. "  IRQS684 ,IRQS Status Bit 684" "Low,High"
bitfld.long 0x00 11. "  IRQS683 ,IRQS Status Bit 683" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS682 ,IRQS Status Bit 682" "Low,High"
bitfld.long 0x00 9. "  IRQS681 ,IRQS Status Bit 681" "Low,High"
bitfld.long 0x00 8. "  IRQS680 ,IRQS Status Bit 680" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS679 ,IRQS Status Bit 679" "Low,High"
bitfld.long 0x00 6. "  IRQS678 ,IRQS Status Bit 678" "Low,High"
bitfld.long 0x00 5. "  IRQS677 ,IRQS Status Bit 677" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS676 ,IRQS Status Bit 676" "Low,High"
bitfld.long 0x00 3. "  IRQS675 ,IRQS Status Bit 675" "Low,High"
bitfld.long 0x00 2. "  IRQS674 ,IRQS Status Bit 674" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS673 ,IRQS Status Bit 673" "Low,High"
bitfld.long 0x00 0. "  IRQS672 ,IRQS Status Bit 672" "Low,High"
else
rgroup.long 0x0D58++0x03
line.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x17)
rgroup.long 0x0D5C++0x03
line.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22"
bitfld.long 0x00 31. " IRQS735 ,IRQS Status Bit 735" "Low,High"
bitfld.long 0x00 30. "  IRQS734 ,IRQS Status Bit 734" "Low,High"
bitfld.long 0x00 29. "  IRQS733 ,IRQS Status Bit 733" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS732 ,IRQS Status Bit 732" "Low,High"
bitfld.long 0x00 27. "  IRQS731 ,IRQS Status Bit 731" "Low,High"
bitfld.long 0x00 26. "  IRQS730 ,IRQS Status Bit 730" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS729 ,IRQS Status Bit 729" "Low,High"
bitfld.long 0x00 24. "  IRQS728 ,IRQS Status Bit 728" "Low,High"
bitfld.long 0x00 23. "  IRQS727 ,IRQS Status Bit 727" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS726 ,IRQS Status Bit 726" "Low,High"
bitfld.long 0x00 21. "  IRQS725 ,IRQS Status Bit 725" "Low,High"
bitfld.long 0x00 20. "  IRQS724 ,IRQS Status Bit 724" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS723 ,IRQS Status Bit 723" "Low,High"
bitfld.long 0x00 18. "  IRQS722 ,IRQS Status Bit 722" "Low,High"
bitfld.long 0x00 17. "  IRQS721 ,IRQS Status Bit 721" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS720 ,IRQS Status Bit 720" "Low,High"
bitfld.long 0x00 15. "  IRQS719 ,IRQS Status Bit 719" "Low,High"
bitfld.long 0x00 14. "  IRQS718 ,IRQS Status Bit 718" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS717 ,IRQS Status Bit 717" "Low,High"
bitfld.long 0x00 12. "  IRQS716 ,IRQS Status Bit 716" "Low,High"
bitfld.long 0x00 11. "  IRQS715 ,IRQS Status Bit 715" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS714 ,IRQS Status Bit 714" "Low,High"
bitfld.long 0x00 9. "  IRQS713 ,IRQS Status Bit 713" "Low,High"
bitfld.long 0x00 8. "  IRQS712 ,IRQS Status Bit 712" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS711 ,IRQS Status Bit 711" "Low,High"
bitfld.long 0x00 6. "  IRQS710 ,IRQS Status Bit 710" "Low,High"
bitfld.long 0x00 5. "  IRQS709 ,IRQS Status Bit 709" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS708 ,IRQS Status Bit 708" "Low,High"
bitfld.long 0x00 3. "  IRQS707 ,IRQS Status Bit 707" "Low,High"
bitfld.long 0x00 2. "  IRQS706 ,IRQS Status Bit 706" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS705 ,IRQS Status Bit 705" "Low,High"
bitfld.long 0x00 0. "  IRQS704 ,IRQS Status Bit 704" "Low,High"
else
rgroup.long 0x0D5C++0x03
line.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x18)
rgroup.long 0x060++0x03
line.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23"
bitfld.long 0x00 31. " IRQS767 ,IRQS Status Bit 767" "Low,High"
bitfld.long 0x00 30. "  IRQS766 ,IRQS Status Bit 766" "Low,High"
bitfld.long 0x00 29. "  IRQS765 ,IRQS Status Bit 765" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS764 ,IRQS Status Bit 764" "Low,High"
bitfld.long 0x00 27. "  IRQS763 ,IRQS Status Bit 763" "Low,High"
bitfld.long 0x00 26. "  IRQS762 ,IRQS Status Bit 762" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS761 ,IRQS Status Bit 761" "Low,High"
bitfld.long 0x00 24. "  IRQS760 ,IRQS Status Bit 760" "Low,High"
bitfld.long 0x00 23. "  IRQS759 ,IRQS Status Bit 759" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS758 ,IRQS Status Bit 758" "Low,High"
bitfld.long 0x00 21. "  IRQS757 ,IRQS Status Bit 757" "Low,High"
bitfld.long 0x00 20. "  IRQS756 ,IRQS Status Bit 756" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS755 ,IRQS Status Bit 755" "Low,High"
bitfld.long 0x00 18. "  IRQS754 ,IRQS Status Bit 754" "Low,High"
bitfld.long 0x00 17. "  IRQS753 ,IRQS Status Bit 753" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS752 ,IRQS Status Bit 752" "Low,High"
bitfld.long 0x00 15. "  IRQS751 ,IRQS Status Bit 751" "Low,High"
bitfld.long 0x00 14. "  IRQS750 ,IRQS Status Bit 750" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS749 ,IRQS Status Bit 749" "Low,High"
bitfld.long 0x00 12. "  IRQS748 ,IRQS Status Bit 748" "Low,High"
bitfld.long 0x00 11. "  IRQS747 ,IRQS Status Bit 747" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS746 ,IRQS Status Bit 746" "Low,High"
bitfld.long 0x00 9. "  IRQS745 ,IRQS Status Bit 745" "Low,High"
bitfld.long 0x00 8. "  IRQS744 ,IRQS Status Bit 744" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS743 ,IRQS Status Bit 743" "Low,High"
bitfld.long 0x00 6. "  IRQS742 ,IRQS Status Bit 742" "Low,High"
bitfld.long 0x00 5. "  IRQS741 ,IRQS Status Bit 741" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS740 ,IRQS Status Bit 740" "Low,High"
bitfld.long 0x00 3. "  IRQS739 ,IRQS Status Bit 739" "Low,High"
bitfld.long 0x00 2. "  IRQS738 ,IRQS Status Bit 738" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS737 ,IRQS Status Bit 737" "Low,High"
bitfld.long 0x00 0. "  IRQS736 ,IRQS Status Bit 736" "Low,High"
else
rgroup.long 0x0D60++0x03
line.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x19)
rgroup.long 0x0D64++0x03
line.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24"
bitfld.long 0x00 31. " IRQS799 ,IRQS Status Bit 799" "Low,High"
bitfld.long 0x00 30. "  IRQS798 ,IRQS Status Bit 798" "Low,High"
bitfld.long 0x00 29. "  IRQS797 ,IRQS Status Bit 797" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS796 ,IRQS Status Bit 796" "Low,High"
bitfld.long 0x00 27. "  IRQS795 ,IRQS Status Bit 795" "Low,High"
bitfld.long 0x00 26. "  IRQS794 ,IRQS Status Bit 794" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS793 ,IRQS Status Bit 793" "Low,High"
bitfld.long 0x00 24. "  IRQS792 ,IRQS Status Bit 792" "Low,High"
bitfld.long 0x00 23. "  IRQS791 ,IRQS Status Bit 791" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS790 ,IRQS Status Bit 790" "Low,High"
bitfld.long 0x00 21. "  IRQS789 ,IRQS Status Bit 789" "Low,High"
bitfld.long 0x00 20. "  IRQS788 ,IRQS Status Bit 788" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS787 ,IRQS Status Bit 787" "Low,High"
bitfld.long 0x00 18. "  IRQS786 ,IRQS Status Bit 786" "Low,High"
bitfld.long 0x00 17. "  IRQS785 ,IRQS Status Bit 785" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS784 ,IRQS Status Bit 784" "Low,High"
bitfld.long 0x00 15. "  IRQS783 ,IRQS Status Bit 783" "Low,High"
bitfld.long 0x00 14. "  IRQS782 ,IRQS Status Bit 782" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS781 ,IRQS Status Bit 781" "Low,High"
bitfld.long 0x00 12. "  IRQS780 ,IRQS Status Bit 780" "Low,High"
bitfld.long 0x00 11. "  IRQS779 ,IRQS Status Bit 779" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS778 ,IRQS Status Bit 778" "Low,High"
bitfld.long 0x00 9. "  IRQS777 ,IRQS Status Bit 777" "Low,High"
bitfld.long 0x00 8. "  IRQS776 ,IRQS Status Bit 776" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS775 ,IRQS Status Bit 775" "Low,High"
bitfld.long 0x00 6. "  IRQS774 ,IRQS Status Bit 774" "Low,High"
bitfld.long 0x00 5. "  IRQS773 ,IRQS Status Bit 773" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS772 ,IRQS Status Bit 772" "Low,High"
bitfld.long 0x00 3. "  IRQS771 ,IRQS Status Bit 771" "Low,High"
bitfld.long 0x00 2. "  IRQS770 ,IRQS Status Bit 770" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS769 ,IRQS Status Bit 769" "Low,High"
bitfld.long 0x00 0. "  IRQS768 ,IRQS Status Bit 768" "Low,High"
else
rgroup.long 0x0D64++0x03
line.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1A)
rgroup.long 0x0D68++0x03
line.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25"
bitfld.long 0x00 31. " IRQS831 ,IRQS Status Bit 831" "Low,High"
bitfld.long 0x00 30. "  IRQS830 ,IRQS Status Bit 830" "Low,High"
bitfld.long 0x00 29. "  IRQS829 ,IRQS Status Bit 829" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS828 ,IRQS Status Bit 828" "Low,High"
bitfld.long 0x00 27. "  IRQS827 ,IRQS Status Bit 827" "Low,High"
bitfld.long 0x00 26. "  IRQS826 ,IRQS Status Bit 826" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS825 ,IRQS Status Bit 825" "Low,High"
bitfld.long 0x00 24. "  IRQS824 ,IRQS Status Bit 824" "Low,High"
bitfld.long 0x00 23. "  IRQS823 ,IRQS Status Bit 823" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS822 ,IRQS Status Bit 822" "Low,High"
bitfld.long 0x00 21. "  IRQS821 ,IRQS Status Bit 821" "Low,High"
bitfld.long 0x00 20. "  IRQS820 ,IRQS Status Bit 820" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS819 ,IRQS Status Bit 819" "Low,High"
bitfld.long 0x00 18. "  IRQS818 ,IRQS Status Bit 818" "Low,High"
bitfld.long 0x00 17. "  IRQS817 ,IRQS Status Bit 817" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS816 ,IRQS Status Bit 816" "Low,High"
bitfld.long 0x00 15. "  IRQS815 ,IRQS Status Bit 815" "Low,High"
bitfld.long 0x00 14. "  IRQS814 ,IRQS Status Bit 814" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS813 ,IRQS Status Bit 813" "Low,High"
bitfld.long 0x00 12. "  IRQS812 ,IRQS Status Bit 812" "Low,High"
bitfld.long 0x00 11. "  IRQS811 ,IRQS Status Bit 811" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS810 ,IRQS Status Bit 810" "Low,High"
bitfld.long 0x00 9. "  IRQS809 ,IRQS Status Bit 809" "Low,High"
bitfld.long 0x00 8. "  IRQS808 ,IRQS Status Bit 808" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS807 ,IRQS Status Bit 807" "Low,High"
bitfld.long 0x00 6. "  IRQS806 ,IRQS Status Bit 806" "Low,High"
bitfld.long 0x00 5. "  IRQS805 ,IRQS Status Bit 805" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS804 ,IRQS Status Bit 804" "Low,High"
bitfld.long 0x00 3. "  IRQS803 ,IRQS Status Bit 803" "Low,High"
bitfld.long 0x00 2. "  IRQS802 ,IRQS Status Bit 802" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS801 ,IRQS Status Bit 801" "Low,High"
bitfld.long 0x00 0. "  IRQS800 ,IRQS Status Bit 800" "Low,High"
else
rgroup.long 0x0D68++0x03
line.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1B)
rgroup.long 0x0D6C++0x03
line.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26"
bitfld.long 0x00 31. " IRQS863 ,IRQS Status Bit 863" "Low,High"
bitfld.long 0x00 30. "  IRQS862 ,IRQS Status Bit 862" "Low,High"
bitfld.long 0x00 29. "  IRQS861 ,IRQS Status Bit 861" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS860 ,IRQS Status Bit 860" "Low,High"
bitfld.long 0x00 27. "  IRQS859 ,IRQS Status Bit 859" "Low,High"
bitfld.long 0x00 26. "  IRQS858 ,IRQS Status Bit 858" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS857 ,IRQS Status Bit 857" "Low,High"
bitfld.long 0x00 24. "  IRQS856 ,IRQS Status Bit 856" "Low,High"
bitfld.long 0x00 23. "  IRQS855 ,IRQS Status Bit 855" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS854 ,IRQS Status Bit 854" "Low,High"
bitfld.long 0x00 21. "  IRQS853 ,IRQS Status Bit 853" "Low,High"
bitfld.long 0x00 20. "  IRQS852 ,IRQS Status Bit 852" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS851 ,IRQS Status Bit 851" "Low,High"
bitfld.long 0x00 18. "  IRQS850 ,IRQS Status Bit 850" "Low,High"
bitfld.long 0x00 17. "  IRQS849 ,IRQS Status Bit 849" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS848 ,IRQS Status Bit 848" "Low,High"
bitfld.long 0x00 15. "  IRQS847 ,IRQS Status Bit 847" "Low,High"
bitfld.long 0x00 14. "  IRQS846 ,IRQS Status Bit 846" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS845 ,IRQS Status Bit 845" "Low,High"
bitfld.long 0x00 12. "  IRQS844 ,IRQS Status Bit 844" "Low,High"
bitfld.long 0x00 11. "  IRQS843 ,IRQS Status Bit 843" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS842 ,IRQS Status Bit 842" "Low,High"
bitfld.long 0x00 9. "  IRQS841 ,IRQS Status Bit 841" "Low,High"
bitfld.long 0x00 8. "  IRQS840 ,IRQS Status Bit 840" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS839 ,IRQS Status Bit 839" "Low,High"
bitfld.long 0x00 6. "  IRQS838 ,IRQS Status Bit 838" "Low,High"
bitfld.long 0x00 5. "  IRQS837 ,IRQS Status Bit 837" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS836 ,IRQS Status Bit 836" "Low,High"
bitfld.long 0x00 3. "  IRQS835 ,IRQS Status Bit 835" "Low,High"
bitfld.long 0x00 2. "  IRQS834 ,IRQS Status Bit 834" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS833 ,IRQS Status Bit 833" "Low,High"
bitfld.long 0x00 0. "  IRQS832 ,IRQS Status Bit 832" "Low,High"
else
rgroup.long 0x0D6C++0x03
line.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1C)
rgroup.long 0x0D70++0x03
line.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27"
bitfld.long 0x00 31. " IRQS895 ,IRQS Status Bit 895" "Low,High"
bitfld.long 0x00 30. "  IRQS894 ,IRQS Status Bit 894" "Low,High"
bitfld.long 0x00 29. "  IRQS893 ,IRQS Status Bit 893" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS892 ,IRQS Status Bit 892" "Low,High"
bitfld.long 0x00 27. "  IRQS891 ,IRQS Status Bit 891" "Low,High"
bitfld.long 0x00 26. "  IRQS890 ,IRQS Status Bit 890" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS889 ,IRQS Status Bit 889" "Low,High"
bitfld.long 0x00 24. "  IRQS888 ,IRQS Status Bit 888" "Low,High"
bitfld.long 0x00 23. "  IRQS887 ,IRQS Status Bit 887" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS886 ,IRQS Status Bit 886" "Low,High"
bitfld.long 0x00 21. "  IRQS885 ,IRQS Status Bit 885" "Low,High"
bitfld.long 0x00 20. "  IRQS884 ,IRQS Status Bit 884" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS883 ,IRQS Status Bit 883" "Low,High"
bitfld.long 0x00 18. "  IRQS882 ,IRQS Status Bit 882" "Low,High"
bitfld.long 0x00 17. "  IRQS881 ,IRQS Status Bit 881" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS880 ,IRQS Status Bit 880" "Low,High"
bitfld.long 0x00 15. "  IRQS879 ,IRQS Status Bit 879" "Low,High"
bitfld.long 0x00 14. "  IRQS878 ,IRQS Status Bit 878" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS877 ,IRQS Status Bit 877" "Low,High"
bitfld.long 0x00 12. "  IRQS876 ,IRQS Status Bit 876" "Low,High"
bitfld.long 0x00 11. "  IRQS875 ,IRQS Status Bit 875" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS874 ,IRQS Status Bit 874" "Low,High"
bitfld.long 0x00 9. "  IRQS873 ,IRQS Status Bit 873" "Low,High"
bitfld.long 0x00 8. "  IRQS872 ,IRQS Status Bit 872" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS871 ,IRQS Status Bit 871" "Low,High"
bitfld.long 0x00 6. "  IRQS870 ,IRQS Status Bit 870" "Low,High"
bitfld.long 0x00 5. "  IRQS869 ,IRQS Status Bit 869" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS868 ,IRQS Status Bit 868" "Low,High"
bitfld.long 0x00 3. "  IRQS867 ,IRQS Status Bit 867" "Low,High"
bitfld.long 0x00 2. "  IRQS866 ,IRQS Status Bit 866" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS865 ,IRQS Status Bit 865" "Low,High"
bitfld.long 0x00 0. "  IRQS864 ,IRQS Status Bit 864" "Low,High"
else
rgroup.long 0x0D70++0x03
line.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1D)
rgroup.long 0x0D74++0x03
line.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28"
bitfld.long 0x00 31. " IRQS927 ,IRQS Status Bit 927" "Low,High"
bitfld.long 0x00 30. "  IRQS926 ,IRQS Status Bit 926" "Low,High"
bitfld.long 0x00 29. "  IRQS925 ,IRQS Status Bit 925" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS924 ,IRQS Status Bit 924" "Low,High"
bitfld.long 0x00 27. "  IRQS923 ,IRQS Status Bit 923" "Low,High"
bitfld.long 0x00 26. "  IRQS922 ,IRQS Status Bit 922" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS921 ,IRQS Status Bit 921" "Low,High"
bitfld.long 0x00 24. "  IRQS920 ,IRQS Status Bit 920" "Low,High"
bitfld.long 0x00 23. "  IRQS919 ,IRQS Status Bit 919" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS918 ,IRQS Status Bit 918" "Low,High"
bitfld.long 0x00 21. "  IRQS917 ,IRQS Status Bit 917" "Low,High"
bitfld.long 0x00 20. "  IRQS916 ,IRQS Status Bit 916" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS915 ,IRQS Status Bit 915" "Low,High"
bitfld.long 0x00 18. "  IRQS914 ,IRQS Status Bit 914" "Low,High"
bitfld.long 0x00 17. "  IRQS913 ,IRQS Status Bit 913" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS912 ,IRQS Status Bit 912" "Low,High"
bitfld.long 0x00 15. "  IRQS911 ,IRQS Status Bit 911" "Low,High"
bitfld.long 0x00 14. "  IRQS910 ,IRQS Status Bit 910" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS909 ,IRQS Status Bit 909" "Low,High"
bitfld.long 0x00 12. "  IRQS908 ,IRQS Status Bit 908" "Low,High"
bitfld.long 0x00 11. "  IRQS907 ,IRQS Status Bit 907" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS906 ,IRQS Status Bit 906" "Low,High"
bitfld.long 0x00 9. "  IRQS905 ,IRQS Status Bit 905" "Low,High"
bitfld.long 0x00 8. "  IRQS904 ,IRQS Status Bit 904" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS903 ,IRQS Status Bit 903" "Low,High"
bitfld.long 0x00 6. "  IRQS902 ,IRQS Status Bit 902" "Low,High"
bitfld.long 0x00 5. "  IRQS901 ,IRQS Status Bit 901" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS900 ,IRQS Status Bit 900" "Low,High"
bitfld.long 0x00 3. "  IRQS899 ,IRQS Status Bit 899" "Low,High"
bitfld.long 0x00 2. "  IRQS898 ,IRQS Status Bit 898" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS897 ,IRQS Status Bit 897" "Low,High"
bitfld.long 0x00 0. "  IRQS896 ,IRQS Status Bit 896" "Low,High"
else
rgroup.long 0x0D74++0x03
line.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1E)
rgroup.long 0x0D78++0x03
line.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29"
bitfld.long 0x00 31. " IRQS959 ,IRQS Status Bit 959" "Low,High"
bitfld.long 0x00 30. "  IRQS958 ,IRQS Status Bit 958" "Low,High"
bitfld.long 0x00 29. "  IRQS957 ,IRQS Status Bit 957" "Low,High"
textline "                               "
bitfld.long 0x00 28. " IRQS956 ,IRQS Status Bit 956" "Low,High"
bitfld.long 0x00 27. "  IRQS955 ,IRQS Status Bit 955" "Low,High"
bitfld.long 0x00 26. "  IRQS954 ,IRQS Status Bit 954" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS953 ,IRQS Status Bit 953" "Low,High"
bitfld.long 0x00 24. "  IRQS952 ,IRQS Status Bit 952" "Low,High"
bitfld.long 0x00 23. "  IRQS951 ,IRQS Status Bit 951" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS950 ,IRQS Status Bit 950" "Low,High"
bitfld.long 0x00 21. "  IRQS949 ,IRQS Status Bit 949" "Low,High"
bitfld.long 0x00 20. "  IRQS948 ,IRQS Status Bit 948" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS947 ,IRQS Status Bit 947" "Low,High"
bitfld.long 0x00 18. "  IRQS946 ,IRQS Status Bit 946" "Low,High"
bitfld.long 0x00 17. "  IRQS945 ,IRQS Status Bit 945" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS944 ,IRQS Status Bit 944" "Low,High"
bitfld.long 0x00 15. "  IRQS943 ,IRQS Status Bit 943" "Low,High"
bitfld.long 0x00 14. "  IRQS942 ,IRQS Status Bit 942" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS941 ,IRQS Status Bit 941" "Low,High"
bitfld.long 0x00 12. "  IRQS940 ,IRQS Status Bit 940" "Low,High"
bitfld.long 0x00 11. "  IRQS939 ,IRQS Status Bit 939" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS938 ,IRQS Status Bit 938" "Low,High"
bitfld.long 0x00 9. "  IRQS937 ,IRQS Status Bit 937" "Low,High"
bitfld.long 0x00 8. "  IRQS936 ,IRQS Status Bit 936" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS935 ,IRQS Status Bit 935" "Low,High"
bitfld.long 0x00 6. "  IRQS934 ,IRQS Status Bit 934" "Low,High"
bitfld.long 0x00 5. "  IRQS933 ,IRQS Status Bit 933" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS932 ,IRQS Status Bit 932" "Low,High"
bitfld.long 0x00 3. "  IRQS931 ,IRQS Status Bit 931" "Low,High"
bitfld.long 0x00 2. "  IRQS930 ,IRQS Status Bit 930" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS929 ,IRQS Status Bit 929" "Low,High"
bitfld.long 0x00 0. "  IRQS928 ,IRQS Status Bit 928" "Low,High"
else
rgroup.long 0x0D78++0x03
line.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(ad:0xFFFC1000+0x04))&0x0000001F)>=0x1F)
rgroup.long 0x0D7C++0x03
line.long 0x0 "GICD_SPISR30,Shared Peripheral Interrupt Status Register 30"
bitfld.long 0x00 27. " IRQS987 ,IRQS Status Bit 987" "Low,High"
bitfld.long 0x00 26. "  IRQS986 ,IRQS Status Bit 986" "Low,High"
textline "                               "
bitfld.long 0x00 25. " IRQS985 ,IRQS Status Bit 985" "Low,High"
bitfld.long 0x00 24. "  IRQS984 ,IRQS Status Bit 984" "Low,High"
bitfld.long 0x00 23. "  IRQS983 ,IRQS Status Bit 983" "Low,High"
textline "                               "
bitfld.long 0x00 22. " IRQS982 ,IRQS Status Bit 982" "Low,High"
bitfld.long 0x00 21. "  IRQS981 ,IRQS Status Bit 981" "Low,High"
bitfld.long 0x00 20. "  IRQS980 ,IRQS Status Bit 980" "Low,High"
textline "                               "
bitfld.long 0x00 19. " IRQS979 ,IRQS Status Bit 979" "Low,High"
bitfld.long 0x00 18. "  IRQS978 ,IRQS Status Bit 978" "Low,High"
bitfld.long 0x00 17. "  IRQS977 ,IRQS Status Bit 977" "Low,High"
textline "                               "
bitfld.long 0x00 16. " IRQS976 ,IRQS Status Bit 976" "Low,High"
bitfld.long 0x00 15. "  IRQS975 ,IRQS Status Bit 975" "Low,High"
bitfld.long 0x00 14. "  IRQS974 ,IRQS Status Bit 974" "Low,High"
textline "                               "
bitfld.long 0x00 13. " IRQS973 ,IRQS Status Bit 973" "Low,High"
bitfld.long 0x00 12. "  IRQS972 ,IRQS Status Bit 972" "Low,High"
bitfld.long 0x00 11. "  IRQS971 ,IRQS Status Bit 971" "Low,High"
textline "                               "
bitfld.long 0x00 10. " IRQS970 ,IRQS Status Bit 970" "Low,High"
bitfld.long 0x00 9. "  IRQS969 ,IRQS Status Bit 969" "Low,High"
bitfld.long 0x00 8. "  IRQS968 ,IRQS Status Bit 968" "Low,High"
textline "                               "
bitfld.long 0x00 7. " IRQS967 ,IRQS Status Bit 967" "Low,High"
bitfld.long 0x00 6. "  IRQS966 ,IRQS Status Bit 966" "Low,High"
bitfld.long 0x00 5. "  IRQS965 ,IRQS Status Bit 965" "Low,High"
textline "                               "
bitfld.long 0x00 4. " IRQS964 ,IRQS Status Bit 964" "Low,High"
bitfld.long 0x00 3. "  IRQS963 ,IRQS Status Bit 963" "Low,High"
bitfld.long 0x00 2. "  IRQS962 ,IRQS Status Bit 962" "Low,High"
textline "                               "
bitfld.long 0x00 1. " IRQS961 ,IRQS Status Bit 961" "Low,High"
bitfld.long 0x00 0. "  IRQS960 ,IRQS Status Bit 960" "Low,High"
else
rgroup.long 0x0D7C++0x03
line.long 0x0 "GICD_SPISR30,Shared Peripheral Interrupt Status Register 30"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
tree.end
width 25.
tree "Software Generated Interrupt"
if (((per.l(ad:0xFFFC1000+0x04))&0x400)==0x400)
wgroup.long 0x0F00++0x03
line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register"
bitfld.long 0x00 24.--25. " TLF           ,Target List Filter" "TargetList,All CPUs,Request CPU,?..."
hexmask.long.byte 0x00 16.--23. 1. "  CPUTL         ,CPU Target List"
textline "                                  "
bitfld.long 0x00 15. " NSATT         ,NSATT" "Secure,Non-secure"
bitfld.long 0x00 0.--3. "   SGINTID       ,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
wgroup.long 0x0F00++0x03
line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register"
bitfld.long 0x00 24.--25. " TLF           ,Target List Filter" "TargetList,All CPUs,Request CPU,?..."
hexmask.long.byte 0x00 16.--23. 1. "  CPUTL         ,CPU Target List"
textline "                                  "
bitfld.long 0x00 0.--3. " SGINTID       ,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
group.long 0x0F20++0x03
line.long 0x00 "GICD_SET/CLR_PENDSGIR0,SGI Set/Clear Pending Register 0"
setclrfld.long 0x00 31. 0x00 31. -0x10 31. " SET/CLR_SGI0  ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. -0x10 30. "     SET/CLR_SGI0  ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. -0x10 29. "  SET/CLR_SGI0  ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 28. 0x00 28. -0x10 28. " SET/CLR_SGI0  ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. -0x10 27. "     SET/CLR_SGI0  ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. -0x10 26. "  SET/CLR_SGI0  ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 25. 0x00 25. -0x10 25. " SET/CLR_SGI0  ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. -0x10 24. "     SET/CLR_SGI0  ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. -0x10 23. "  SET/CLR_SGI1  ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 22. 0x00 22. -0x10 22. " SET/CLR_SGI1  ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. -0x10 21. "     SET/CLR_SGI1  ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. -0x10 20. "  SET/CLR_SGI1  ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 19. 0x00 19. -0x10 19. " SET/CLR_SGI1  ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. -0x10 18. "     SET/CLR_SGI1  ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. -0x10 17. "  SET/CLR_SGI1  ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 16. 0x00 16. -0x10 16. " SET/CLR_SGI1  ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. -0x10 15. "     SET/CLR_SGI2  ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. -0x10 14. "  SET/CLR_SGI2  ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 13. 0x00 13. -0x10 13. " SET/CLR_SGI2  ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. -0x10 12. "     SET/CLR_SGI2  ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. -0x10 11. "  SET/CLR_SGI2  ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 10. 0x00 10. -0x10 10. " SET/CLR_SGI2  ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. -0x10 9. "     SET/CLR_SGI2  ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. -0x10 8. "  SET/CLR_SGI2  ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 7. 0x00 7. -0x10 7. " SET/CLR_SGI3  ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. -0x10 6. "     SET/CLR_SGI3  ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. -0x10 5. "  SET/CLR_SGI3  ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 4. 0x00 4. -0x10 4. " SET/CLR_SGI3  ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. -0x10 3. "     SET/CLR_SGI3  ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. -0x10 2. "  SET/CLR_SGI3  ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 1. 0x00 1. -0x10 1. " SET/CLR_SGI3  ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. -0x10 0. "     SET/CLR_SGI3  ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled"
group.long 0x0F24++0x03
line.long 0x00 "GICD_SET/CLR_PENDSGIR1,SGI Set/Clear Pending Register 1"
setclrfld.long 0x00 31. 0x00 31. -0x10 31. " SET/CLR_SGI4  ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. -0x10 30. "     SET/CLR_SGI4  ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. -0x10 29. "  SET/CLR_SGI4  ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 28. 0x00 28. -0x10 28. " SET/CLR_SGI4  ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. -0x10 27. "     SET/CLR_SGI4  ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. -0x10 26. "  SET/CLR_SGI4  ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 25. 0x00 25. -0x10 25. " SET/CLR_SGI4  ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. -0x10 24. "     SET/CLR_SGI4  ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. -0x10 23. "  SET/CLR_SGI5  ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 22. 0x00 22. -0x10 22. " SET/CLR_SGI5  ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. -0x10 21. "     SET/CLR_SGI5  ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. -0x10 20. "  SET/CLR_SGI5  ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 19. 0x00 19. -0x10 19. " SET/CLR_SGI5  ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. -0x10 18. "     SET/CLR_SGI5  ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. -0x10 17. "  SET/CLR_SGI5  ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 16. 0x00 16. -0x10 16. " SET/CLR_SGI5  ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. -0x10 15. "     SET/CLR_SGI6  ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. -0x10 14. "  SET/CLR_SGI6  ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 13. 0x00 13. -0x10 13. " SET/CLR_SGI6  ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. -0x10 12. "     SET/CLR_SGI6  ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. -0x10 11. "  SET/CLR_SGI6  ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 10. 0x00 10. -0x10 10. " SET/CLR_SGI6  ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. -0x10 9. "     SET/CLR_SGI6  ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. -0x10 8. "  SET/CLR_SGI6  ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 7. 0x00 7. -0x10 7. " SET/CLR_SGI7  ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. -0x10 6. "     SET/CLR_SGI7  ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. -0x10 5. "  SET/CLR_SGI7  ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 4. 0x00 4. -0x10 4. " SET/CLR_SGI7  ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. -0x10 3. "     SET/CLR_SGI7  ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. -0x10 2. "  SET/CLR_SGI7  ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 1. 0x00 1. -0x10 1. " SET/CLR_SGI7  ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. -0x10 0. "     SET/CLR_SGI7  ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled"
group.long 0x0F28++0x03
line.long 0x00 "GICD_SET/CLR_PENDSGIR2,SGI Set/Clear Pending Register 2"
setclrfld.long 0x00 31. 0x00 31. -0x10 31. " SET/CLR_SGI8  ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. -0x10 30. "     SET/CLR_SGI8  ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. -0x10 29. "  SET/CLR_SGI8  ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 28. 0x00 28. -0x10 28. " SET/CLR_SGI8  ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. -0x10 27. "     SET/CLR_SGI8  ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. -0x10 26. "  SET/CLR_SGI8  ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 25. 0x00 25. -0x10 25. " SET/CLR_SGI8  ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. -0x10 24. "     SET/CLR_SGI8  ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. -0x10 23. "  SET/CLR_SGI9  ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 22. 0x00 22. -0x10 22. " SET/CLR_SGI9  ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. -0x10 21. "     SET/CLR_SGI9  ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. -0x10 20. "  SET/CLR_SGI9  ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 19. 0x00 19. -0x10 19. " SET/CLR_SGI9  ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. -0x10 18. "     SET/CLR_SGI9  ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. -0x10 17. "  SET/CLR_SGI9  ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 16. 0x00 16. -0x10 16. " SET/CLR_SGI9  ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. -0x10 15. "     SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. -0x10 14. "  SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 13. 0x00 13. -0x10 13. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. -0x10 12. "     SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. -0x10 11. "  SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 10. 0x00 10. -0x10 10. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. -0x10 9. "     SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. -0x10 8. "  SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 7. 0x00 7. -0x10 7. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. -0x10 6. "     SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. -0x10 5. "  SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 4. 0x00 4. -0x10 4. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. -0x10 3. "     SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. -0x10 2. "  SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 1. 0x00 1. -0x10 1. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. -0x10 0. "     SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled"
group.long 0x0F2C++0x03
line.long 0x00 "GICD_SET/CLR_PENDSGIR2,SGI Set/Clear Pending Register 3"
setclrfld.long 0x00 31. 0x00 31. -0x10 31. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. -0x10 30. "     SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. -0x10 29. "  SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 28. 0x00 28. -0x10 28. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. -0x10 27. "     SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. -0x10 26. "  SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 25. 0x00 25. -0x10 25. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. -0x10 24. "     SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. -0x10 23. "  SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 22. 0x00 22. -0x10 22. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. -0x10 21. "     SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. -0x10 20. "  SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 19. 0x00 19. -0x10 19. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. -0x10 18. "     SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. -0x10 17. "  SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 16. 0x00 16. -0x10 16. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. -0x10 15. "     SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. -0x10 14. "  SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 13. 0x00 13. -0x10 13. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. -0x10 12. "     SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. -0x10 11. "  SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 10. 0x00 10. -0x10 10. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. -0x10 9. "     SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. -0x10 8. "  SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 7. 0x00 7. -0x10 7. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. -0x10 6. "     SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. -0x10 5. "  SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 4. 0x00 4. -0x10 4. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. -0x10 3. "     SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. -0x10 2. "  SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled"
textline "                                  "
setclrfld.long 0x00 1. 0x00 1. -0x10 1. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. -0x10 0. "     SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled"
tree.end
width 12.
tree "Peripheral/Component ID Registers"
rgroup.byte 0x0FE0++0x00
line.byte 0x00 "GICD_PIDR0,Peripheral ID0 Register"
hexmask.byte 0x00 0.--7. 1. " DEVID         ,DevID field"
rgroup.byte 0x0FE4++0x00
line.byte 0x00 "GICD_PIDR1,Peripheral ID1 Register"
bitfld.byte 0x00 4.--7. " ARCHID        ,ArchID field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "             DEVID         ,DevID field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.byte 0x0FE8++0x00
line.byte 0x00 "GICD_PIDR2,Peripheral ID2 Register"
bitfld.byte 0x00 4.--7. " ARCHREV       ,ArchRev field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 3. "             UJEPCODE      ,UsesJEPcode field" "Low,High"
bitfld.byte 0x00 0.--2. "           ARCHID         ,ArchID field" "0,1,2,3,4,5,6,7"
rgroup.byte 0x0FEC++0x00
line.byte 0x00 "GICD_PIDR3,Peripheral ID3 Register"
bitfld.byte 0x00 4.--7. " REVID         ,Revision field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.byte 0x0FD0++0x00
line.byte 0x00 "GICD_PIDR4,Peripheral ID4 Register"
bitfld.byte 0x00 0.--3. " CC            ,ContinuationCode field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.byte 0xFD4++0x00
line.byte 0x00 "GICD_PIDR5,Peripheral ID5 Register"
rgroup.byte 0xFD8++0x00
line.byte 0x00 "GICD_PIDR6,Peripheral ID6 Register"
rgroup.byte 0xFDC++0x00
line.byte 0x00 "GICD_PIDR7,Peripheral ID7 Register"
textline "                 "
rgroup.byte 0xFF0++0x00
line.byte 0x00 "GICD_CIDR0,Component ID0 Register"
hexmask.byte 0x00 0.--7. 1. " FIXVAL        ,ARM-defined fixed values for the preamble for component discovery"
rgroup.byte 0xFF4++0x00
line.byte 0x00 "GICD_CIDR1,Component ID1 Register"
hexmask.byte 0x00 0.--7. 1. " FIXVAL        ,ARM-defined fixed values for the preamble for component discovery"
rgroup.byte 0xFF8++0x00
line.byte 0x00 "GICD_CIDR2,Component ID2 Register"
hexmask.byte 0x00 0.--7. 1. " FIXVAL        ,ARM-defined fixed values for the preamble for component discovery"
rgroup.byte 0xFFC++0x00
line.byte 0x00 "GICD_CIDR3,Component ID3 Register"
hexmask.byte 0x00 0.--7. 1. " FIXVAL        ,ARM-defined fixed values for the preamble for component discovery"
textline "                 "
tree.end
tree.end
width 0x0B
base ad:0xFFFC2000
width 17.
tree "CPU Interface"
if (((per.l(ad:0xFFFC1000+0x04))&0x400)==0x0)
group.long 0x0000++0x03
line.long 0x00 "GICC_CTLR,CPU Interface Control Register"
bitfld.long 0x00 9. " EOIMODENS     ,Controls the behavior of Non-secure accesses to the GICC_EOIR and GICC_DIR registers" "Priority drop/Deactivate,Priority drop"
bitfld.long 0x00 6. "  IRQBYPDISGRP1 ,When the signaling of IRQs by the CPU interface is disabled this bit partly controls whether the bypass IRQ signal is signaled to the processor" "Signaled,Not signaled"
bitfld.long 0x00 5. "              FIQBYPDISGRP1 ,When the signaling of FIQs by the CPU interface is disabled this bit partly controls whether the bypass FIQ signal is signaled to the processor" "Signaled,Not signaled"
textline "                          "
bitfld.long 0x00 0. " ENABLEGRP1    ,Enable for the signaling of Group 1 interrupts by the CPU interface to the connected processor" "Disabled,Enabled"
textline "                          "
textline "                          "
else
if PER.ADDRESS.isSECUREEX(ad:0xFFFC2000)
group.long 0x0000++0x03
line.long 0x00 "GICC_CTLR,CPU Interface Control Register (Secure access)"
bitfld.long 0x00 10. " EOIMODENS     ,Controls the behavior of Non-secure accesses to the GICC_EOIR and GICC_DIR registers" "Priority drop/Deactivate,Priority drop"
bitfld.long 0x00 9. "  EOIMODES      ,Controls the behavior of accesses to GICC_EOIR and GICC_DIR registers" "Priority drop/Deactivate,Priority drop"
bitfld.long 0x00 8. "  IRQBYPDISGRP1 ,When the signaling of IRQs by the CPU interface is disabled this bit partly controls whether the bypass IRQ signal is signaled to the processor" "Signaled,Not signaled"
textline "                          "
bitfld.long 0x00 7. " FIQBYPDISGRP1 ,When the signaling of FIQs by the CPU interface is disabled this bit partly controls whether the bypass FIQ signal is signaled to the processor" "Signaled,Not signaled"
bitfld.long 0x00 6. "              IRQBYPDISGRP0 ,When the signaling of FIQs by the CPU interface is disabled this bit partly controls whether the bypass FIQ signal is signaled to the processor" "Signaled,Not signaled"
bitfld.long 0x00 5. "              FIQBYPDISGRP0 ,When the signaling of FIQs by the CPU interface is disabled this bit partly controls whether the bypass FIQ signal is signaled to the processor" "Signaled,Not signaled"
textline "                          "
bitfld.long 0x00 4. " CBPR          ,Controls whether the GICC_BPR provides common control to Group 0 and Group 1 interrupts" "BPR/ABPR split,BPR common"
bitfld.long 0x00 3. "            FIQEN         ,Controls whether the CPU interface signals Group 0 interrupts to a target processor using the FIQ or the IRQ signal" "IRQ,FIQ"
bitfld.long 0x00 2. "                       ACKCTL        ,Acknowledge Control" "ID 1022 interrupt,Corresponding interrupt"
textline "                          "
bitfld.long 0x00 1. " ENABLEGRP1    ,Enable for the signaling of Group 1 interrupts by the CPU interface to the connected processor" "Disabled,Enabled"
bitfld.long 0x00 0. "                  ENABLEGRP0    ,Enable for the signaling of Group 0 interrupts by the CPU interface to the connected processor" "Disabled,Enabled"
else
group.long 0x0000++0x03
line.long 0x00 "GICC_CTLR,CPU Interface Control Register  (Non-secure access)"
bitfld.long 0x00 9. " EOIMODENS     ,Controls the behavior of Non-secure accesses to the GICC_EOIR and GICC_DIR registers" "Priority drop/Deactivate,Priority drop"
bitfld.long 0x00 6. "  IRQBYPDISGRP1 ,When the signaling of IRQs by the CPU interface is disabled this bit partly controls whether the bypass IRQ signal is signaled to the processor" "Signaled,Not signaled"
bitfld.long 0x00 5. "              FIQBYPDISGRP1 ,When the signaling of FIQs by the CPU interface is disabled this bit partly controls whether the bypass FIQ signal is signaled to the processor" "Signaled,Not signaled"
textline "                          "
bitfld.long 0x00 0. " ENABLEGRP1    ,Enable for the signaling of Group 1 interrupts by the CPU interface to the connected processor" "Disabled,Enabled"
textline "                          "
textline "                          "
endif
endif
group.long 0x0004++0x03
line.long 0x00 "GICC_PMR,Interrupt Priority Mask Register"
hexmask.long.byte 0x00 0.--7. 1. " PRIORITY      ,Priority mask level for CPU interface"
if (((per.l(ad:0xFFFC1000+0x04))&0x400)==0x400)
if PER.ADDRESS.isSECUREEX(ad:0xFFFC2000+0x0008)
group.long 0x0008++0x03
line.long 0x00 "GICC_BPR,Binary Point Register (Secure access)"
bitfld.long 0x00 0.--2. " BINARY_POINT  ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
else
group.long 0x0008++0x03
line.long 0x00 "GICC_BPR,Binary Point Register (Non-secure access)"
bitfld.long 0x00 0.--2. " BINARY_POINT  ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,Reserved,[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
endif
else
group.long 0x0008++0x03
line.long 0x00 "GICC_BPR,Binary Point Register"
bitfld.long 0x00 0.--2. " BINARY_POINT  ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,Reserved,[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
endif
hgroup.long 0x000C++0x03
hide.long 0x00 "GICC_IAR,Interrupt Acknowledge Register"
in
wgroup.long 0x0010++0x03
line.long 0x00 "GICC_EOIR,End Of Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID         ,On a multiprocessor implementation if the write refers to an SGI this field contains the CPUID value from the corresponding GICC_IAR access" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         EOIINTID      ,The Interrupt ID value from the corresponding GICC_IAR access"
rgroup.long 0x0014++0x03
line.long 0x00 "GICC_RPR,Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. " PRIORITY      ,The current running priority on the CPU interface"
rgroup.long 0x0018++0x03
line.long 0x00 "GICC_HPIR,Highest Priority Pending Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID         ,On a multiprocessor implementation if the PENDINTID field returns the ID of an SGI this field contains the CPUID value for that interrupt" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         PENDINTID     ,The interrupt ID of the highest priority pending interrupt"
if (((per.l(ad:0xFFFC1000+0x04))&0x400)==0x400)
group.long 0x001C++0x03
line.long 0x00 "GICC_ABPR,Aliased Binary Point Register"
bitfld.long 0x00 0.--2. " BINARY_POINT  ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
else
hgroup.long 0x001C++0x03
hide.long 0x00 "GICC_ABPR,Aliased Binary Point Register"
endif
hgroup.long 0x0020++0x003
hide.long 0x00 "GICC_AIAR,Aliased Interrupt Acknowledge Register"
in
if (((per.l(ad:0xFFFC1000+0x04))&0x400)==0x400)
wgroup.long 0x0024++0x03
line.long 0x00 "GICC_AEOIR,Aliased End of Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID         ,On a multiprocessor implementation if the write refers to an SGI this field contains the CPUID value from the corresponding GICC_IAR access" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         EOIINTID      ,The Interrupt ID value from the corresponding GICC_IAR access"
rgroup.long 0x0028++0x03
line.long 0x00 "GICC_AHPPIR,Aliased Highest Priority Pending Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID         ,On a multiprocessor implementation if the PENDINTID field returns the ID of an SGI this field contains the CPUID value for that interrupt" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         PENDINTID     ,The interrupt ID of the highest priority pending interrupt"
else
hgroup.long 0x0024++0x03
hide.long 0x00 "GICC_AEOIR,Aliased End of Interrupt Register"
hgroup.long 0x0028++0x03
hide.long 0x00 "GICC_AHPPIR,Aliased Highest Priority Pending Interrupt Register"
endif
group.long 0x00D0++0x03
line.long 0x00 "GICC_APR0,Active Priorities Register"
if (((per.l(ad:0xFFFC1000+0x04))&0x400)==0x400)
group.long 0x00E0++0x03
line.long 0x00 "GICC_NSAPR0,Non-Secure Active Priorities Register"
else
hgroup.long 0x00E0++0x03
hide.long 0x00 "GICC_NSAPR0,Non-Secure Active Priorities Register"
endif
rgroup.long 0x00FC++0x03
line.long 0x00 "GICC_IIDR,CPU and Virtual CPU Interface Identification Register"
hexmask.long.word 0x00 20.--31. 1. " PRODID        ,Product ID"
bitfld.long 0x00 16.--19. "  ARCH_VER        ,Identifies the architecture version of the GIC" "GICv1,GICv1,GICv2,GICv2,?..."
textline "                     "
bitfld.long 0x00 12.--15. "      REV           ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "    IMP             ,Implementer"
wgroup.long 0x1000++0x03
line.long 0x00 "GICC_DIR,Deactivate Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID         ,On a multiprocessor implementation this field identifies the processor that requested the interrupt" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "     INTID         ,The interrupt ID"
tree.end
sif CPU.FEATURE(hypervisor)
base ad:0xFFFC4000
width 12.
tree "Virtual CPU Control Interface"
group.long 0x0000++0x03
line.long 0x00 "GICH_HCR,Hypervisor Control Register"
bitfld.long 0x00 27.--31. " EOICOUNT  ,Counts the number of EOIs received that do not have a corresponding entry in the List registers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "                    VGRP1DIE   ,VM Disable Group 1 Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "      VGRP1EIE  ,VM Enable Group 1 Interrupt Enable" "Disabled,Enabled"
textline "                     "
bitfld.long 0x00 5. " VGRP0DIE  ,VM Disable Group 0 Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 4. "              VGRP0EIE   ,VM Disable Group 0 Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "      NPIE      ,No Pending Interrupt Enable" "Disabled,Enabled"
textline "                     "
bitfld.long 0x00 2. " LRENPIE   ,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 1. "              UIE        ,Underflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 0. "      EN        ,Enable" "Disabled,Enabled"
rgroup.long 0x0004++0x03
line.long 0x00 "GICH_VTR,VGIC Type Register"
bitfld.long 0x00 29.--31. " PRIBITS   ,Number of priority bits" "Reserved,Reserved,Reserved,Reserved,5 bits 32 PRI levels,?..."
textline "                     "
bitfld.long 0x00 26.--28. " PREBITS   ,Number of pre-emption bits" "Reserved,Reserved,Reserved,Reserved,5 bits 32 PRE levels,?..."
textline "                     "
bitfld.long 0x00 0.--5. " LISTREGS  ,List regs number" "Reserved,Reserved,Reserved,4 lists,?..."
group.long 0x008++0x03
line.long 0x00 "GICH_VMCR,Virtual Machine Control Register"
bitfld.long 0x00 27.--31. " VMPRIMASK ,Alias of GICV_PMR.Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "                    VMBP       ,Alias of GICV_BPR.Binary point" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 18.--20. "             VMABP     ,Alias of GICV_ABPR.Binary point" "0,1,2,3,4,5,6,7"
textline "                     "
bitfld.long 0x00 9. " VEM       ,Alias of GICV_CTLR.EOImode" "0,1"
bitfld.long 0x00 4. "                     VMCBPR     ,Alias of GICV_CTLR.CBPR" "0,1"
bitfld.long 0x00 3. "             VMFIQEN   ,Alias of GICV_CTLR.FIQEn" "0,1"
textline "                     "
bitfld.long 0x00 2. " VMACKCTL  ,Alias of GICV_CTLR.AckCtl" "0,1"
bitfld.long 0x00 1. "                     VMGRP1EN   ,Alias of GICV_CTLR.EnableGrp1" "0,1"
bitfld.long 0x00 0. "             VMGRP0EN  ,Alias of GICV_CTLR.EnableGrp0" "0,1"
rgroup.long 0x0010++0x03
line.long 0x00 "GICH_MISR,Maintenance Interrupt Status Register"
bitfld.long 0x00 7. " VGRP1D    ,Disabled Group 1 maintenance interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          VGRP1E     ,Enabled Group 1 maintenance interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "  VGRP0D    ,Disabled Group 0 maintenance interrupt" "No interrupt,Interrupt"
textline "                     "
bitfld.long 0x00 4. " VGRP0E    ,Enabled Group 0 maintenance interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          NP         ,No Pending maintenance interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "  LRENP     ,List Register Entry Not Present maintenance interrupt" "No interrupt,Interrupt"
textline "                     "
bitfld.long 0x00 1. " U         ,Underflow maintenance interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          EOI        ,EOI maintenance interrupt" "No interrupt,Interrupt"
rgroup.long 0x020++0x03
line.long 0x00 "GICH_EISR0,End of Interrupt Status Register"
bitfld.long 0x00 3. " STATUS3   ,EOI maintenance interrupt status for List register 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          STATUS2    ,EOI maintenance interrupt status for List register 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "  STATUS1   ,EOI maintenance interrupt status for List register 1" "No interrupt,Interrupt"
textline "                     "
bitfld.long 0x00 0. " STATUS0   ,EOI maintenance interrupt status for List register 0" "No interrupt,Interrupt"
rgroup.long 0x0030++0x03
line.long 0x00 "GICH_ELSR0,Empty List register Status Register"
bitfld.long 0x00 3. " STATUS3   ,Emptiness status bit for List register 3" "Not empty,Empty"
bitfld.long 0x00 2. "             STATUS2    ,Emptiness status bit for List register 2" "Not empty,Empty"
bitfld.long 0x00 1. "     STATUS1   ,Emptiness status bit for List register 1" "Not empty,Empty"
textline "                     "
bitfld.long 0x00 0. " STATUS0   ,Emptiness status bit for List register 0" "Not empty,Empty"
group.long 0x00F0++0x03
line.long 0x00 "GICH_APR0,Active Priorities Register"
bitfld.long 0x00 31. " APB31     ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 30. "            APB30      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 29. "    APB29     ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 28. " APB28     ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 27. "            APB27      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 26. "    APB26     ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 25. " APB25     ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 24. "            APB24      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 23. "    APB23     ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 22. " APB22     ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 21. "            APB21      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 20. "    APB20     ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 19. " APB19     ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 18. "            APB18      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 17. "    APB17     ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 16. " APB16     ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 15. "            APB15      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 14. "    APB14     ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 13. " APB13     ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 12. "            APB12      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 11. "    APB11     ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 10. " APB10     ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 9. "            APB9       ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 8. "    APB8      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 7. " APB7      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 6. "            APB6       ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 5. "    APB5      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 4. " APB4      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 3. "            APB3       ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 2. "    APB2      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 1. " APB1      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 0. "            APB0       ,Determines whether the corresponding preemption level is active" "Not active,Active"
if (((per.l(ad:0xFFFC4000+0x100))&0x80000000)==0x80000000)
group.long 0x100++0x03
line.long 0x00 "GICH_LR0,List Register 0"
bitfld.long 0x00 31. " HW        ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "              GRP1       ,Indicates whether this virtual interrupt is a Group 1 virtual interrupt" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "       STATE     ,The state of the interrupt" "Invalid,Pending,Active,Pending and active"
textline "                     "
bitfld.long 0x00 23.--27. " PRIORITY  ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "                    PHYSICALID ,Indicates the physical interrupt ID that the hypervisor forwards to the Distributor"
hexmask.long.word 0x00 0.--9. 1. "          VIRTUALID ,This ID is returned to the Guest OS when the interrupt is acknowledged through the VM Interrupt Acknowledge register, GICV_IAR"
else
group.long 0x100++0x03
line.long 0x00 "GICH_LR0,List Register 0"
bitfld.long 0x00 31. " HW        ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "              GRP1       ,Indicates whether this virtual interrupt is a Group 1 virtual interrupt" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "       STATE     ,The state of the interrupt" "Invalid,Pending,Active,Pending and active"
textline "                     "
bitfld.long 0x00 23.--27. " PRIORITY  ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19. "                    EOI        ,Indicates whether this interrupt triggers an EOI maintenance interrupt" "Not asserted,Asserted"
bitfld.long 0x00 10.--12. "  CPUID     ,If the interrupt has the VirtualID for an SGI that is 0-15 this field shows the requesting CPU ID" "0,1,2,3,4,5,6,7"
textline "                     "
hexmask.long.word 0x00 0.--9. 1. " VIRTUALID ,This ID is returned to the Guest OS when the interrupt is acknowledged through the VM Interrupt Acknowledge register, GICV_IAR"
endif
if (((per.l(ad:0xFFFC4000+0x104))&0x80000000)==0x80000000)
group.long 0x104++0x03
line.long 0x00 "GICH_LR1,List Register 1"
bitfld.long 0x00 31. " HW        ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "              GRP1       ,Indicates whether this virtual interrupt is a Group 1 virtual interrupt" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "       STATE     ,The state of the interrupt" "Invalid,Pending,Active,Pending and active"
textline "                     "
bitfld.long 0x00 23.--27. " PRIORITY  ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "                    PHYSICALID ,Indicates the physical interrupt ID that the hypervisor forwards to the Distributor"
hexmask.long.word 0x00 0.--9. 1. "          VIRTUALID ,This ID is returned to the Guest OS when the interrupt is acknowledged through the VM Interrupt Acknowledge register, GICV_IAR"
else
group.long 0x104++0x03
line.long 0x00 "GICH_LR1,List Register 1"
bitfld.long 0x00 31. " HW        ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "              GRP1       ,Indicates whether this virtual interrupt is a Group 1 virtual interrupt" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "       STATE     ,The state of the interrupt" "Invalid,Pending,Active,Pending and active"
textline "                     "
bitfld.long 0x00 23.--27. " PRIORITY  ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19. "                    EOI        ,Indicates whether this interrupt triggers an EOI maintenance interrupt" "Not asserted,Asserted"
bitfld.long 0x00 10.--12. "  CPUID     ,If the interrupt has the VirtualID for an SGI that is 0-15 this field shows the requesting CPU ID" "0,1,2,3,4,5,6,7"
textline "                     "
hexmask.long.word 0x00 0.--9. 1. " VIRTUALID ,This ID is returned to the Guest OS when the interrupt is acknowledged through the VM Interrupt Acknowledge register, GICV_IAR"
endif
if (((per.l(ad:0xFFFC4000+0x108))&0x80000000)==0x80000000)
group.long 0x108++0x03
line.long 0x00 "GICH_LR2,List Register 2"
bitfld.long 0x00 31. " HW        ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "              GRP1       ,Indicates whether this virtual interrupt is a Group 1 virtual interrupt" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "       STATE     ,The state of the interrupt" "Invalid,Pending,Active,Pending and active"
textline "                     "
bitfld.long 0x00 23.--27. " PRIORITY  ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "                    PHYSICALID ,Indicates the physical interrupt ID that the hypervisor forwards to the Distributor"
hexmask.long.word 0x00 0.--9. 1. "          VIRTUALID ,This ID is returned to the Guest OS when the interrupt is acknowledged through the VM Interrupt Acknowledge register, GICV_IAR"
else
group.long 0x108++0x03
line.long 0x00 "GICH_LR2,List Register 2"
bitfld.long 0x00 31. " HW        ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "              GRP1       ,Indicates whether this virtual interrupt is a Group 1 virtual interrupt" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "       STATE     ,The state of the interrupt" "Invalid,Pending,Active,Pending and active"
textline "                     "
bitfld.long 0x00 23.--27. " PRIORITY  ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19. "                    EOI        ,Indicates whether this interrupt triggers an EOI maintenance interrupt" "Not asserted,Asserted"
bitfld.long 0x00 10.--12. "  CPUID     ,If the interrupt has the VirtualID for an SGI that is 0-15 this field shows the requesting CPU ID" "0,1,2,3,4,5,6,7"
textline "                     "
hexmask.long.word 0x00 0.--9. 1. " VIRTUALID ,This ID is returned to the Guest OS when the interrupt is acknowledged through the VM Interrupt Acknowledge register, GICV_IAR"
endif
if (((per.l(ad:0xFFFC4000+0x10C))&0x80000000)==0x80000000)
group.long 0x10C++0x03
line.long 0x00 "GICH_LR3,List Register 3"
bitfld.long 0x00 31. " HW        ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "              GRP1       ,Indicates whether this virtual interrupt is a Group 1 virtual interrupt" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "       STATE     ,The state of the interrupt" "Invalid,Pending,Active,Pending and active"
textline "                     "
bitfld.long 0x00 23.--27. " PRIORITY  ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "                    PHYSICALID ,Indicates the physical interrupt ID that the hypervisor forwards to the Distributor"
hexmask.long.word 0x00 0.--9. 1. "          VIRTUALID ,This ID is returned to the Guest OS when the interrupt is acknowledged through the VM Interrupt Acknowledge register, GICV_IAR"
else
group.long 0x10C++0x03
line.long 0x00 "GICH_LR3,List Register 3"
bitfld.long 0x00 31. " HW        ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "              GRP1       ,Indicates whether this virtual interrupt is a Group 1 virtual interrupt" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "       STATE     ,The state of the interrupt" "Invalid,Pending,Active,Pending and active"
textline "                     "
bitfld.long 0x00 23.--27. " PRIORITY  ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19. "                    EOI        ,Indicates whether this interrupt triggers an EOI maintenance interrupt" "Not asserted,Asserted"
bitfld.long 0x00 10.--12. "  CPUID     ,If the interrupt has the VirtualID for an SGI that is 0-15 this field shows the requesting CPU ID" "0,1,2,3,4,5,6,7"
textline "                     "
hexmask.long.word 0x00 0.--9. 1. " VIRTUALID ,This ID is returned to the Guest OS when the interrupt is acknowledged through the VM Interrupt Acknowledge register, GICV_IAR"
endif
tree.end
base ad:0xFFFC6000
width 12.
tree "Virtual CPU Interface"
group.long 0x0000++0x03
line.long 0x00 "GICV_CTLR,Virtual Machine Control Register"
bitfld.long 0x00 9. " EOIMODE      ,Controls the behavior associated with the GICV_EOIR GICV_AEOIR and GICV_DIR registers" "Priority drop/Deactivate,Priority drop"
bitfld.long 0x00 4. "  CBPR       ,Controls whether the GICV_BPR controls both Group 0 and Group 1 virtual interrupts" "BPR/ABPR split,BPR common"
bitfld.long 0x00 3. "  FIQEN      ,Controls whether interrupts marked as Group 0 are presented as virtual FIQs" "IRQs,FIQs"
textline "                     "
bitfld.long 0x00 2. " ACKCTL       ,Acknowledge Control" "ID 1022 interrupt,Corresponding interrupt"
bitfld.long 0x00 1. "   ENABLEGRP1 ,Enables the signaling of Group 1 virtual interrupts by the virtual CPU interface to the virtual machine" "Disabled,Enabled"
bitfld.long 0x00 0. "        ENABLEGRP0 ,Enables the signaling of Group 0 virtual interrupts by the virtual CPU interface to the virtual machine" "Disabled,Enabled"
group.long 0x0004++0x03
line.long 0x00 "GICV_PMR,VM Priority Mask Register"
bitfld.long 0x00 3.--7. " PRIORITY     ,Priority mask level for CPU interface" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x0008++0x03
line.long 0x00 "GICV_BPR,VM Binary Point Register"
bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
hgroup.long 0x000C++0x03
hide.long 0x00 "GICV_IAR,VM Interrupt Acknowledge Register"
in
wgroup.long 0x0010++0x03
line.long 0x00 "GICV_EOIR,VM End of Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID        ,On a multiprocessor implementation if the write refers to an SGI this field contains the CPUID value from the corresponding GICC_IAR access" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         EOIINTID   ,The Interrupt ID value from the corresponding GICC_IAR access"
rgroup.long 0x0014++0x03
line.long 0x00 "GICV_RPR,VM Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. " PRIORITY     ,The current running priority on the Virtual CPU interface"
rgroup.long 0x0018++0x03
line.long 0x00 "GICV_HPPIR,VM Highest Priority Pending Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID        ,On a multiprocessor implementation if the PENDINTID field returns the ID of an SGI this field contains the CPUID value for that interrupt" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         PENDINTID  ,The interrupt ID of the highest priority pending interrupt"
group.long 0x001C++0x03
line.long 0x00 "GICV_ABPR,VM Aliased Binary Point Register"
bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
hgroup.long 0x0020++0x03
hide.long 0x00 "GICV_AIAR,VM Aliased Interrupt Acknowledge Register"
in
wgroup.long 0x0024++0x03
line.long 0x00 "GICV_AEOIR,VM Aliased End of Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID        ,On a multiprocessor implementation if the write refers to an SGI this field contains the CPUID value from the corresponding GICC_IAR access" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         EOIINTID   ,The Interrupt ID value from the corresponding GICC_IAR access"
rgroup.long 0x0028++0x03
line.long 0x00 "GICV_AHPPIR,VM Aliased Highest Priority Pending Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID        ,On a multiprocessor implementation if the PENDINTID field returns the ID of an SGI this field contains the CPUID value for that interrupt" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         PENDINTID  ,The interrupt ID of the highest priority pending interrupt"
group.long 0x00D0++0x03
line.long 0x00 "GICV_APR0,VM Active Priority Register"
bitfld.long 0x00 31. " APB31        ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 30. "                APB30      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 29. "  APB29      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 28. " APB28        ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 27. "                APB27      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 26. "  APB26      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 25. " APB25        ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 24. "                APB24      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 23. "  APB23      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 22. " APB22        ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 21. "                APB21      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 20. "  APB20      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 19. " APB19        ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 18. "                APB18      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 17. "  APB17      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 16. " APB16        ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 15. "                APB15      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 14. "  APB14      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 13. " APB13        ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 12. "                APB12      ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 11. "  APB11      ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 10. " APB10        ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 9. "                APB9       ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 8. "  APB8       ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 7. " APB7         ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 6. "                APB6       ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 5. "  APB5       ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 4. " APB4         ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 3. "                APB3       ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 2. "  APB2       ,Determines whether the corresponding preemption level is active" "Not active,Active"
textline "                     "
bitfld.long 0x00 1. " APB1         ,Determines whether the corresponding preemption level is active" "Not active,Active"
bitfld.long 0x00 0. "                APB0       ,Determines whether the corresponding preemption level is active" "Not active,Active"
rgroup.long 0x00FC++0x03
line.long 0x00 "GICV_IIDR,VM CPU Interface Identification Register"
hexmask.long.word 0x00 20.--31. 1. " PRODID       ,Product ID"
bitfld.long 0x00 16.--19. "                      ARCH_VER   ,Identifies the architecture version of the GIC" "GICv1,GICv2,?..."
textline "                     "
bitfld.long 0x00 12.--15. " REV          ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "                        IMP        ,Implementer"
wgroup.long 0x1000++0x03
line.long 0x00 "GICV_DIR,VM Deactivate Interrupt Register"
bitfld.long 0x00 10.--12. " CPUID        ,On a multiprocessor implementation this field identifies the processor that requested the interrupt" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--9. 1. "                         INTID      ,The interrupt ID"
tree.end
endif
width 0x0B
tree.end
tree.end
tree "CCU (Cache Coherency Unit)"
base ad:0xF7000000
tree.open "BRIDGE CCC0 Registers"
tree "BRIDGE CCC0 MPRT 6 81 Registers"
width 39.
group.quad (0x38400+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38420+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38440+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38460+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38480+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x384A0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x384C0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x384E0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38500+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38520+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38540+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38560+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38580+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x385A0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x385C0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x385E0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38600+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38620+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38640+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38660+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38680+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
width 0x0B
newline
width 39.
group.quad (0x38408+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38428+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38448+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38468+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38488+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x384A8+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x384C8+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x384E8+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38508+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38528+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38548+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38568+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38588+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE C 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x385A8+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE D 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x385C8+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE E 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x385E8+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38608+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38628+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38648+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38668+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38688+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
width 0x0B
newline
width 16.
rgroup.quad (0x3BD08+0x00)++0x07
line.quad 0x00 "AM_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+0x00)++0x07
line.quad 0x00 "AM_ERR,Error Status Register"
bitfld.quad 0x00 40. " E40 ,SIB portcheck error" "No error,Error"
bitfld.quad 0x00 34. "          E34 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 33. "          E33 ,Capture counter1 overflow error" "No error,Error"
bitfld.quad 0x00 32. "          E32 ,Capture counter0 overflow error" "No error,Error"
newline
bitfld.quad 0x00 24. " E24 ,Unexpected narrow write error" "No error,Error"
bitfld.quad 0x00 23. "          E23 ,Write WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 22. "          E22 ,Write response timeout error" "No error,Error"
bitfld.quad 0x00 21. "          E21 ,Write address multi-hit error" "No error,Error"
newline
bitfld.quad 0x00 20. " E20 ,Write exclusive split error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Write slave error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write address decode error from slave error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Local write address decode error" "No error,Error"
bitfld.quad 0x00 8. "          E8  ,Unexpected narrow read error" "No error,Error"
bitfld.quad 0x00 7. "          E7  ,Read WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 6. "          E6  ,Read response timeout error" "No error,Error"
newline
bitfld.quad 0x00 5. " E5  ,Read address multi-hit error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read exclusive split error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Read slave error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read address decode from slave error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Read decode response error" "No error,Error"
group.quad (0x3BE40+0x00)++0x07
line.quad 0x00 "AM_INTM,Interrupt Mask Register"
bitfld.quad 0x00 40. " M40 ,Mask interrupt for SIB portcheck error" "0,1"
bitfld.quad 0x00 34. "                 M34 ,Mask interrupt on traffic to PG layer" "0,1"
bitfld.quad 0x00 33. "                 M33 ,Capture counter1 overflow interrupt mask" "0,1"
bitfld.quad 0x00 32. "                 M32 ,Capture counter0 overflow interrupt mask" "0,1"
newline
bitfld.quad 0x00 24. " M24 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 23. "                 M23 ,Write WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 22. "                 M22 ,Write response timeout interrupt mask" "0,1"
bitfld.quad 0x00 21. "                 M21 ,Write address multi-hit interrupt mask" "0,1"
newline
bitfld.quad 0x00 20. " M20 ,Write exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Non modifiable WRAP mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write slave interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write address decode error from slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Local write address decode interrupt mask" "0,1"
bitfld.quad 0x00 8. "                 M8  ,Unexpected narrow read interrupt mask" "0,1"
bitfld.quad 0x00 7. "                 M7  ,Read WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 6. "                 M6  ,Read response timeout interrupt mask" "0,1"
newline
bitfld.quad 0x00 5. " M5  ,Read address multi-hit mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Non modifiable WRAP interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read address decode from slave interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read decode response interrupt mask" "0,1"
rgroup.quad (0x3BD00+0x00)++0x07
line.quad 0x00 "AM_STS,AM_STS"
bitfld.quad 0x00 7. " AWO ,Write commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 6. "   ARO ,Read commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 5. "   AWS ,AW channel is stalled on hazard" "Not stalled,Stalled"
bitfld.quad 0x00 4. "       ARS ,AR channel is stalled on hazard" "Not stalled,Stalled"
newline
bitfld.quad 0x00 1. " WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+0x00+0x00)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+0x00+0x00)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+0x00+0x00)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+0x00+0x00)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+0x00+0x00)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+0x00+0x00)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+0x00+0x00)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+0x00+0x00)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+0x00+0x00)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+0x00+0x00)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+0x00+0x00)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+0x00+0x00)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+0x00+0x00)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+0x00+0x00)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+0x00+0x00)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+0x00+0x00)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+0x00+0x00)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+0x00+0x00)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+0x00+0x00)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+0x00+0x00)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+0x00+0x00)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+0x00+0x00)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+0x00+0x00)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+0x00+0x00)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+0x00+0x00)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+0x00+0x00)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+0x00+0x00)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+0x00+0x00)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+0x00+0x00)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree "BRIDGE CCC0 SPRT 7 82 Registers"
width 16.
rgroup.quad (0x3BD08+0x2000)++0x07
line.quad 0x00 "AS_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+0x2000)++0x07
line.quad 0x00 "AS_ERR,Error Status Register"
bitfld.quad 0x00 32. " E32 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Write command modified error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Unknown write response destination error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write slave response error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Write decode response error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read command modified error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Interleaved read response error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Unknown read response destination error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read slave response error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Local read address decode error" "No error,Error"
group.quad (0x3BE40+0x2000)++0x07
line.quad 0x00 "AS_INTM,Interrupt Mask Register"
bitfld.quad 0x00 32. " M32 ,Traffic to PG layer interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read channel interrupt mask" "0,1"
rgroup.quad (0x3BD00+0x2000)++0x07
line.quad 0x00 "AS_STS,AS_STS"
bitfld.quad 0x00 3. " ROE ,Read commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 2. "   WOE ,Write commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 1. "   ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+0x2000+0x2000)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+0x2000+0x2000)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+0x2000+0x2000)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+0x2000+0x2000)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+0x2000+0x2000)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+0x2000+0x2000)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+0x2000+0x2000)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+0x2000+0x2000)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+0x2000+0x2000)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+0x2000+0x2000)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+0x2000+0x2000)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+0x2000+0x2000)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+0x2000+0x2000)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+0x2000+0x2000)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+0x2000+0x2000)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+0x2000+0x2000)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+0x2000+0x2000)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+0x2000+0x2000)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+0x2000+0x2000)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+0x2000+0x2000)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+0x2000+0x2000)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+0x2000+0x2000)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+0x2000+0x2000)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+0x2000+0x2000)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+0x2000+0x2000)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+0x2000+0x2000)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+0x2000+0x2000)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+0x2000+0x2000)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+0x2000+0x2000)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree.end
width 42.
tree "BRIDGE CPU0 MPRT 0 37 Registers"
rgroup.quad 0x7F78++0x07
line.quad 0x00 "SYSCOACK_REG,Coherency Connection Status Register"
bitfld.quad 0x00 0. " STAT_REG     ,Coherency connection status" "0,1"
group.quad 0x7F70++0x07
line.quad 0x00 "SYSCOREQ_REG,Coherency Connection Request Register"
bitfld.quad 0x00 0. " REQ_REG      ,Coherency connection request" "0,1"
group.quad 0x4400++0x07
line.quad 0x00 "AM_ADBASE_MEM_DDRREG_SPRT_DDRREGSPACE0_0,DDRREGSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad 0x4420++0x07
line.quad 0x00 "AM_ADBASE_MEM_GIC_SPRT_GICSPACE_0,GICSPACE 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
newline
width 39.
group.quad (0x4440+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4460+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4480+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44A0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44C0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44E0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4500+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4520+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4540+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4560+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE2A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4580+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE2B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45A0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE2C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45C0+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45E0+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4600+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4620+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4640+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4660+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4680+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46A0+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46C0+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46E0+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4700+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4720+0x00+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
width 0x0B
newline
width 42.
group.quad 0x4740++0x07
line.quad 0x00 "AM_ADBASE_MEM_RBM_S_REGSPACE_RD_0,REGSPACE RD 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC   ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "        DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "        R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS    ,Non-secure" "0,1"
bitfld.quad 0x00 0. "          P  ,Privileged" "0,1"
group.quad 0x4760++0x07
line.quad 0x00 "AM_ADBASE_MEM_RBM_S_REGSPACE_WR_0,REGSPACE WR 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC   ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "        DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "        R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS    ,Non-secure" "0,1"
bitfld.quad 0x00 0. "          P  ,Privileged" "0,1"
group.quad 0x4408++0x07
line.quad 0x00 "AM_ADMASK_MEM_DDRREG_SPRT_DDRREGSPACE0_0,DDRREGSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 2. " I            ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "         NS    ,Non-secure field is valid" "Not valid,Valid"
bitfld.quad 0x00 0. "  P  ,Privileged field is valid" "Not valid,Valid"
group.quad 0x4428++0x07
line.quad 0x00 "AM_ADMASK_MEM_GIC_SPRT_GICSPACE_0,GICSPACE 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 2. " I            ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "         NS    ,Non-secure field is valid" "Not valid,Valid"
bitfld.quad 0x00 0. "  P  ,Privileged field is valid" "Not valid,Valid"
newline
width 39.
group.quad (0x4448+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4468+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4488+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44A8+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44C8+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44E8+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4508+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4528+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4548+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4568+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE2A_0,IOSPACE 2A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4588+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE2B_0,IOSPACE 2B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x45A8+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE2C_0,IOSPACE 2C 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x45C8+0x00+0x00)++0x07
line.quad 0x00 "AM_AMASK_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x45E8+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4608+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4628+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4648+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4668+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4688+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46A8+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46C8+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46E8+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4708+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4728+0x00+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
width 0x0B
width 42.
newline
group.quad 0x4748++0x07
line.quad 0x00 "AM_ADMASK_MEM_RBM_S_REGSPACE_RD_0,REGSPACE RD 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "  NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P    ,Privileged" "0,1"
group.quad 0x4768++0x07
line.quad 0x00 "AM_ADMASK_MEM_RBM_S_REGSPACE_WR_0,REGSPACE WR 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "  NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P    ,Privileged" "0,1"
newline
width 16.
rgroup.quad (0x3BD08+-0x34000)++0x07
line.quad 0x00 "AM_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0x34000)++0x07
line.quad 0x00 "AM_ERR,Error Status Register"
bitfld.quad 0x00 40. " E40 ,SIB portcheck error" "No error,Error"
bitfld.quad 0x00 34. "          E34 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 33. "          E33 ,Capture counter1 overflow error" "No error,Error"
bitfld.quad 0x00 32. "          E32 ,Capture counter0 overflow error" "No error,Error"
newline
bitfld.quad 0x00 24. " E24 ,Unexpected narrow write error" "No error,Error"
bitfld.quad 0x00 23. "          E23 ,Write WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 22. "          E22 ,Write response timeout error" "No error,Error"
bitfld.quad 0x00 21. "          E21 ,Write address multi-hit error" "No error,Error"
newline
bitfld.quad 0x00 20. " E20 ,Write exclusive split error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Write slave error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write address decode error from slave error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Local write address decode error" "No error,Error"
bitfld.quad 0x00 8. "          E8  ,Unexpected narrow read error" "No error,Error"
bitfld.quad 0x00 7. "          E7  ,Read WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 6. "          E6  ,Read response timeout error" "No error,Error"
newline
bitfld.quad 0x00 5. " E5  ,Read address multi-hit error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read exclusive split error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Read slave error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read address decode from slave error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Read decode response error" "No error,Error"
group.quad (0x3BE40+-0x34000)++0x07
line.quad 0x00 "AM_INTM,Interrupt Mask Register"
bitfld.quad 0x00 40. " M40 ,Mask interrupt for SIB portcheck error" "0,1"
bitfld.quad 0x00 34. "                 M34 ,Mask interrupt on traffic to PG layer" "0,1"
bitfld.quad 0x00 33. "                 M33 ,Capture counter1 overflow interrupt mask" "0,1"
bitfld.quad 0x00 32. "                 M32 ,Capture counter0 overflow interrupt mask" "0,1"
newline
bitfld.quad 0x00 24. " M24 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 23. "                 M23 ,Write WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 22. "                 M22 ,Write response timeout interrupt mask" "0,1"
bitfld.quad 0x00 21. "                 M21 ,Write address multi-hit interrupt mask" "0,1"
newline
bitfld.quad 0x00 20. " M20 ,Write exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Non modifiable WRAP mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write slave interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write address decode error from slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Local write address decode interrupt mask" "0,1"
bitfld.quad 0x00 8. "                 M8  ,Unexpected narrow read interrupt mask" "0,1"
bitfld.quad 0x00 7. "                 M7  ,Read WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 6. "                 M6  ,Read response timeout interrupt mask" "0,1"
newline
bitfld.quad 0x00 5. " M5  ,Read address multi-hit mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Non modifiable WRAP interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read address decode from slave interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read decode response interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0x34000)++0x07
line.quad 0x00 "AM_STS,AM_STS"
bitfld.quad 0x00 7. " AWO ,Write commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 6. "   ARO ,Read commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 5. "   AWS ,AW channel is stalled on hazard" "Not stalled,Stalled"
bitfld.quad 0x00 4. "       ARS ,AR channel is stalled on hazard" "Not stalled,Stalled"
newline
bitfld.quad 0x00 1. " WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0x34000+0x00)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0x34000+0x00)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0x34000+0x00)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0x34000+0x00)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0x34000+0x00)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0x34000+0x00)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0x34000+0x00)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0x34000+0x00)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0x34000+0x00)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0x34000+0x00)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0x34000+0x00)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0x34000+0x00)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0x34000+0x00)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0x34000+0x00)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0x34000+0x00)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0x34000+0x00)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0x34000+0x00)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0x34000+0x00)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0x34000+0x00)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0x34000+0x00)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0x34000+0x00)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0x34000+0x00)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0x34000+0x00)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0x34000+0x00)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0x34000+0x00)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0x34000+0x00)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0x34000+0x00)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0x34000+0x00)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0x34000+0x00)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree "BRIDGE DDRREG SPRT 8 118 Registers"
width 16.
rgroup.quad (0x3BD08+-0x32000)++0x07
line.quad 0x00 "AS_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0x32000)++0x07
line.quad 0x00 "AS_ERR,Error Status Register"
bitfld.quad 0x00 32. " E32 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Write command modified error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Unknown write response destination error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write slave response error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Write decode response error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read command modified error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Interleaved read response error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Unknown read response destination error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read slave response error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Local read address decode error" "No error,Error"
group.quad (0x3BE40+-0x32000)++0x07
line.quad 0x00 "AS_INTM,Interrupt Mask Register"
bitfld.quad 0x00 32. " M32 ,Traffic to PG layer interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read channel interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0x32000)++0x07
line.quad 0x00 "AS_STS,AS_STS"
bitfld.quad 0x00 3. " ROE ,Read commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 2. "   WOE ,Write commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 1. "   ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0x32000+0x2000)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0x32000+0x2000)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0x32000+0x2000)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0x32000+0x2000)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0x32000+0x2000)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0x32000+0x2000)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0x32000+0x2000)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0x32000+0x2000)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0x32000+0x2000)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0x32000+0x2000)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0x32000+0x2000)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0x32000+0x2000)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0x32000+0x2000)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0x32000+0x2000)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree "BRIDGE DVM0 SPRT 9 70 Registers"
width 16.
rgroup.quad (0x3BD08+0x6000)++0x07
line.quad 0x00 "AS_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+0x6000)++0x07
line.quad 0x00 "AS_ERR,Error Status Register"
bitfld.quad 0x00 32. " E32 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Write command modified error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Unknown write response destination error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write slave response error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Write decode response error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read command modified error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Interleaved read response error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Unknown read response destination error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read slave response error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Local read address decode error" "No error,Error"
group.quad (0x3BE40+0x6000)++0x07
line.quad 0x00 "AS_INTM,Interrupt Mask Register"
bitfld.quad 0x00 32. " M32 ,Traffic to PG layer interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read channel interrupt mask" "0,1"
rgroup.quad (0x3BD00+0x6000)++0x07
line.quad 0x00 "AS_STS,AS_STS"
bitfld.quad 0x00 3. " ROE ,Read commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 2. "   WOE ,Write commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 1. "   ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+0x6000+0x2000)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+0x6000+0x2000)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+0x6000+0x2000)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+0x6000+0x2000)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+0x6000+0x2000)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+0x6000+0x2000)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+0x6000+0x2000)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+0x6000+0x2000)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+0x6000+0x2000)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+0x6000+0x2000)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+0x6000+0x2000)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+0x6000+0x2000)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+0x6000+0x2000)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+0x6000+0x2000)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+0x6000+0x2000)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+0x6000+0x2000)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+0x6000+0x2000)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+0x6000+0x2000)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+0x6000+0x2000)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+0x6000+0x2000)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+0x6000+0x2000)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+0x6000+0x2000)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+0x6000+0x2000)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+0x6000+0x2000)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+0x6000+0x2000)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+0x6000+0x2000)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+0x6000+0x2000)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+0x6000+0x2000)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+0x6000+0x2000)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
width 42.
tree "BRIDGE FPGA1ACEL MPRT 4 118 Registers"
group.quad 0x10400++0x07
line.quad 0x00 "AM_ADBASE_MEM_DDRREG_SPRT_DDRREGSPACE0_0,DDRREGSPACE0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
newline
width 39.
group.quad (0x4440+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4460+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4480+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44A0+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44C0+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44E0+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4500+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4520+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4540+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4560+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE2A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4580+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE2B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45A0+0xBFE0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE2C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45C0+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45E0+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4600+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4620+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4640+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4660+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4680+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46A0+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46C0+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46E0+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4700+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4720+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
width 0x0B
newline
width 42.
group.quad 0x10408++0x07
line.quad 0x00 "AM_ADMASK_MEM_DDRREG_SPRT_DDRREGSPACE0_0,DDRREGSPACE0 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
newline
width 39.
group.quad (0x4448+0xBFE0)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4468+0xBFE0)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4488+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44A8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44C8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44E8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4508+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4528+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4548+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4568+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE2A_0,IOSPACE 2A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4588+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE2B_0,IOSPACE 2B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x45A8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE2C_0,IOSPACE 2C 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x45C8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_AMASK_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x45E8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4608+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4628+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4648+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4668+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4688+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46A8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46C8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46E8+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4708+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4728+0xBFE0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
width 0x0B
newline
width 16.
rgroup.quad (0x3BD08+-0x28000)++0x07
line.quad 0x00 "AM_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0x28000)++0x07
line.quad 0x00 "AM_ERR,Error Status Register"
bitfld.quad 0x00 40. " E40 ,SIB portcheck error" "No error,Error"
bitfld.quad 0x00 34. "          E34 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 33. "          E33 ,Capture counter1 overflow error" "No error,Error"
bitfld.quad 0x00 32. "          E32 ,Capture counter0 overflow error" "No error,Error"
newline
bitfld.quad 0x00 24. " E24 ,Unexpected narrow write error" "No error,Error"
bitfld.quad 0x00 23. "          E23 ,Write WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 22. "          E22 ,Write response timeout error" "No error,Error"
bitfld.quad 0x00 21. "          E21 ,Write address multi-hit error" "No error,Error"
newline
bitfld.quad 0x00 20. " E20 ,Write exclusive split error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Write slave error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write address decode error from slave error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Local write address decode error" "No error,Error"
bitfld.quad 0x00 8. "          E8  ,Unexpected narrow read error" "No error,Error"
bitfld.quad 0x00 7. "          E7  ,Read WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 6. "          E6  ,Read response timeout error" "No error,Error"
newline
bitfld.quad 0x00 5. " E5  ,Read address multi-hit error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read exclusive split error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Read slave error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read address decode from slave error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Read decode response error" "No error,Error"
group.quad (0x3BE40+-0x28000)++0x07
line.quad 0x00 "AM_INTM,Interrupt Mask Register"
bitfld.quad 0x00 40. " M40 ,Mask interrupt for SIB portcheck error" "0,1"
bitfld.quad 0x00 34. "                 M34 ,Mask interrupt on traffic to PG layer" "0,1"
bitfld.quad 0x00 33. "                 M33 ,Capture counter1 overflow interrupt mask" "0,1"
bitfld.quad 0x00 32. "                 M32 ,Capture counter0 overflow interrupt mask" "0,1"
newline
bitfld.quad 0x00 24. " M24 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 23. "                 M23 ,Write WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 22. "                 M22 ,Write response timeout interrupt mask" "0,1"
bitfld.quad 0x00 21. "                 M21 ,Write address multi-hit interrupt mask" "0,1"
newline
bitfld.quad 0x00 20. " M20 ,Write exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Non modifiable WRAP mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write slave interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write address decode error from slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Local write address decode interrupt mask" "0,1"
bitfld.quad 0x00 8. "                 M8  ,Unexpected narrow read interrupt mask" "0,1"
bitfld.quad 0x00 7. "                 M7  ,Read WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 6. "                 M6  ,Read response timeout interrupt mask" "0,1"
newline
bitfld.quad 0x00 5. " M5  ,Read address multi-hit mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Non modifiable WRAP interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read address decode from slave interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read decode response interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0x28000)++0x07
line.quad 0x00 "AM_STS,AM_STS"
bitfld.quad 0x00 7. " AWO ,Write commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 6. "   ARO ,Read commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 5. "   AWS ,AW channel is stalled on hazard" "Not stalled,Stalled"
bitfld.quad 0x00 4. "       ARS ,AR channel is stalled on hazard" "Not stalled,Stalled"
newline
bitfld.quad 0x00 1. " WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0x28000+0x00)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0x28000+0x00)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0x28000+0x00)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0x28000+0x00)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0x28000+0x00)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0x28000+0x00)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0x28000+0x00)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0x28000+0x00)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0x28000+0x00)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0x28000+0x00)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0x28000+0x00)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0x28000+0x00)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0x28000+0x00)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0x28000+0x00)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0x28000+0x00)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0x28000+0x00)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0x28000+0x00)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0x28000+0x00)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0x28000+0x00)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0x28000+0x00)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0x28000+0x00)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0x28000+0x00)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0x28000+0x00)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0x28000+0x00)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0x28000+0x00)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0x28000+0x00)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0x28000+0x00)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0x28000+0x00)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0x28000+0x00)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree "BRIDGE GIC SPRT 10 100 Registers"
width 16.
rgroup.quad (0x3BD08+-0x26000)++0x07
line.quad 0x00 "AS_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0x26000)++0x07
line.quad 0x00 "AS_ERR,Error Status Register"
bitfld.quad 0x00 32. " E32 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Write command modified error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Unknown write response destination error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write slave response error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Write decode response error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read command modified error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Interleaved read response error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Unknown read response destination error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read slave response error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Local read address decode error" "No error,Error"
group.quad (0x3BE40+-0x26000)++0x07
line.quad 0x00 "AS_INTM,Interrupt Mask Register"
bitfld.quad 0x00 32. " M32 ,Traffic to PG layer interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read channel interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0x26000)++0x07
line.quad 0x00 "AS_STS,AS_STS"
bitfld.quad 0x00 3. " ROE ,Read commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 2. "   WOE ,Write commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 1. "   ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0x26000+0x2000)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0x26000+0x2000)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0x26000+0x2000)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0x26000+0x2000)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0x26000+0x2000)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0x26000+0x2000)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0x26000+0x2000)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0x26000+0x2000)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0x26000+0x2000)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0x26000+0x2000)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0x26000+0x2000)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0x26000+0x2000)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0x26000+0x2000)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0x26000+0x2000)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree.open "BRIDGE IOCB0 Registers"
tree "BRIDGE IOCB0 MPRT 2 82 Registers"
width 39.
group.quad (0x38400+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38420+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38440+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38460+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38480+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x384A0+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x384C0+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x384E0+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38500+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38520+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38540+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38560+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38580+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x385A0+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x385C0+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x385E0+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38600+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38620+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38640+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38660+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x38680+0xC000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
rbitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
rbitfld.quad 0x00 2. " I            ,Instruction" "0,1"
rbitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
rbitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
width 0x0B
newline
width 39.
group.quad (0x38408+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38428+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38448+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38468+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38488+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x384A8+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x384C8+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x384E8+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38508+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38528+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38548+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38568+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38588+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE C 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x385A8+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE D 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x385C8+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE E 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x385E8+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38608+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38628+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38648+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38668+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
group.quad (0x38688+0xC000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
rbitfld.quad 0x00 3. "  VALID ,R_WN is valid" "Not valid,Valid"
rbitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
rbitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
rbitfld.quad 0x00 0. " P    ,Privileged field is valid" "Not valid,Valid"
width 0x0B
newline
width 16.
rgroup.quad (0x3BD08+0xC000)++0x07
line.quad 0x00 "AM_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+0xC000)++0x07
line.quad 0x00 "AM_ERR,Error Status Register"
bitfld.quad 0x00 40. " E40 ,SIB portcheck error" "No error,Error"
bitfld.quad 0x00 34. "          E34 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 33. "          E33 ,Capture counter1 overflow error" "No error,Error"
bitfld.quad 0x00 32. "          E32 ,Capture counter0 overflow error" "No error,Error"
newline
bitfld.quad 0x00 24. " E24 ,Unexpected narrow write error" "No error,Error"
bitfld.quad 0x00 23. "          E23 ,Write WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 22. "          E22 ,Write response timeout error" "No error,Error"
bitfld.quad 0x00 21. "          E21 ,Write address multi-hit error" "No error,Error"
newline
bitfld.quad 0x00 20. " E20 ,Write exclusive split error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Write slave error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write address decode error from slave error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Local write address decode error" "No error,Error"
bitfld.quad 0x00 8. "          E8  ,Unexpected narrow read error" "No error,Error"
bitfld.quad 0x00 7. "          E7  ,Read WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 6. "          E6  ,Read response timeout error" "No error,Error"
newline
bitfld.quad 0x00 5. " E5  ,Read address multi-hit error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read exclusive split error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Read slave error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read address decode from slave error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Read decode response error" "No error,Error"
group.quad (0x3BE40+0xC000)++0x07
line.quad 0x00 "AM_INTM,Interrupt Mask Register"
bitfld.quad 0x00 40. " M40 ,Mask interrupt for SIB portcheck error" "0,1"
bitfld.quad 0x00 34. "                 M34 ,Mask interrupt on traffic to PG layer" "0,1"
bitfld.quad 0x00 33. "                 M33 ,Capture counter1 overflow interrupt mask" "0,1"
bitfld.quad 0x00 32. "                 M32 ,Capture counter0 overflow interrupt mask" "0,1"
newline
bitfld.quad 0x00 24. " M24 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 23. "                 M23 ,Write WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 22. "                 M22 ,Write response timeout interrupt mask" "0,1"
bitfld.quad 0x00 21. "                 M21 ,Write address multi-hit interrupt mask" "0,1"
newline
bitfld.quad 0x00 20. " M20 ,Write exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Non modifiable WRAP mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write slave interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write address decode error from slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Local write address decode interrupt mask" "0,1"
bitfld.quad 0x00 8. "                 M8  ,Unexpected narrow read interrupt mask" "0,1"
bitfld.quad 0x00 7. "                 M7  ,Read WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 6. "                 M6  ,Read response timeout interrupt mask" "0,1"
newline
bitfld.quad 0x00 5. " M5  ,Read address multi-hit mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Non modifiable WRAP interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read address decode from slave interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read decode response interrupt mask" "0,1"
rgroup.quad (0x3BD00+0xC000)++0x07
line.quad 0x00 "AM_STS,AM_STS"
bitfld.quad 0x00 7. " AWO ,Write commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 6. "   ARO ,Read commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 5. "   AWS ,AW channel is stalled on hazard" "Not stalled,Stalled"
bitfld.quad 0x00 4. "       ARS ,AR channel is stalled on hazard" "Not stalled,Stalled"
newline
bitfld.quad 0x00 1. " WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+0xC000+0x00)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+0xC000+0x00)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+0xC000+0x00)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+0xC000+0x00)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+0xC000+0x00)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+0xC000+0x00)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+0xC000+0x00)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+0xC000+0x00)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+0xC000+0x00)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+0xC000+0x00)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+0xC000+0x00)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+0xC000+0x00)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+0xC000+0x00)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+0xC000+0x00)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+0xC000+0x00)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+0xC000+0x00)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+0xC000+0x00)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+0xC000+0x00)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+0xC000+0x00)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+0xC000+0x00)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+0xC000+0x00)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+0xC000+0x00)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+0xC000+0x00)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+0xC000+0x00)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+0xC000+0x00)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+0xC000+0x00)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+0xC000+0x00)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+0xC000+0x00)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+0xC000+0x00)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree "BRIDGE IOCB0 SPRT 11 67 Registers"
width 16.
rgroup.quad (0x3BD08+0xE000)++0x07
line.quad 0x00 "AS_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+0xE000)++0x07
line.quad 0x00 "AS_ERR,Error Status Register"
bitfld.quad 0x00 32. " E32 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Write command modified error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Unknown write response destination error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write slave response error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Write decode response error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read command modified error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Interleaved read response error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Unknown read response destination error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read slave response error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Local read address decode error" "No error,Error"
group.quad (0x3BE40+0xE000)++0x07
line.quad 0x00 "AS_INTM,Interrupt Mask Register"
bitfld.quad 0x00 32. " M32 ,Traffic to PG layer interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read channel interrupt mask" "0,1"
rgroup.quad (0x3BD00+0xE000)++0x07
line.quad 0x00 "AS_STS,AS_STS"
bitfld.quad 0x00 3. " ROE ,Read commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 2. "   WOE ,Write commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 1. "   ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+0xE000+0x2000)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+0xE000+0x2000)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+0xE000+0x2000)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+0xE000+0x2000)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+0xE000+0x2000)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+0xE000+0x2000)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+0xE000+0x2000)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+0xE000+0x2000)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+0xE000+0x2000)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+0xE000+0x2000)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+0xE000+0x2000)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+0xE000+0x2000)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+0xE000+0x2000)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+0xE000+0x2000)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+0xE000+0x2000)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+0xE000+0x2000)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+0xE000+0x2000)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+0xE000+0x2000)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+0xE000+0x2000)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+0xE000+0x2000)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+0xE000+0x2000)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+0xE000+0x2000)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+0xE000+0x2000)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+0xE000+0x2000)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+0xE000+0x2000)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+0xE000+0x2000)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+0xE000+0x2000)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+0xE000+0x2000)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+0xE000+0x2000)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree.end
width 42.
tree "BRIDE IOM MPRT 5 63 Registers"
group.quad 0x18400++0x07
line.quad 0x00 "AM_ADBASE_MEM_DDRREG_SPRT_DDRREGSPACE0_0,DDRREGSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad 0x18420++0x07
line.quad 0x00 "AM_ADBASE_MEM_GIC_SPRT_GICSPACE_0,GICSPACE 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
newline
width 39.
group.quad (0x4440+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4460+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4480+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44A0+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44C0+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44E0+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4500+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4520+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4540+0x14000)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45C0+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45E0+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4600+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4620+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4640+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4660+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4680+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46A0+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46C0+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46E0+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4700+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4720+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
width 0x0B
newline
width 42.
group.quad 0x186E0++0x07
line.quad 0x00 "AM_ADBASE_MEM_RBM_S_REGSPACE_RD_0,REGSPACE RD 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC   ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "        DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "        R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS    ,Non-secure" "0,1"
bitfld.quad 0x00 0. "          P  ,Privileged" "0,1"
group.quad 0x18700++0x07
line.quad 0x00 "AM_ADBASE_MEM_RBM_S_REGSPACE_WR_0,REGSPACE WR 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC   ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "        DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "        R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS    ,Non-secure" "0,1"
bitfld.quad 0x00 0. "          P  ,Privileged" "0,1"
group.quad 0x18408++0x07
line.quad 0x00 "AM_ADMASK_MEM_DDRREG_SPRT_DDRREGSPACE0_0,DDRREGSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 2. " I            ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "         NS    ,Non-secure field is valid" "Not valid,Valid"
bitfld.quad 0x00 0. "  P  ,Privileged field is valid" "Not valid,Valid"
group.quad 0x18428++0x07
line.quad 0x00 "AM_ADMASK_MEM_GIC_SPRT_GICSPACE_0,GICSPACE 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 2. " I            ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "         NS    ,Non-secure field is valid" "Not valid,Valid"
bitfld.quad 0x00 0. "  P  ,Privileged field is valid" "Not valid,Valid"
newline
width 39.
group.quad (0x4448+0x14000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4468+0x14000)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4488+0x14000+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44A8+0x14000+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44C8+0x14000+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44E8+0x14000+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4508+0x14000+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4528+0x14000+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4548+0x14000+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x45C8+0x14000+-0x60)++0x07
line.quad 0x00 "AM_AMASK_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x45E8+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4608+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4628+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4648+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4668+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4688+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46A8+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46C8+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46E8+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4708+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4728+0x14000+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
width 0x0B
newline
width 35.
group.quad 0x186E8++0x07
line.quad 0x00 "AM_ADMASK_MEM_RBM_S_REGSPACE_RD_0,REGSPACE RD 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "  NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P    ,Privileged" "0,1"
group.quad 0x18708++0x07
line.quad 0x00 "AM_ADMASK_MEM_RBM_S_REGSPACE_WR_0,REGSPACE WR 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "  NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P    ,Privileged" "0,1"
newline
width 16.
rgroup.quad (0x3BD08+-0x20000)++0x07
line.quad 0x00 "AM_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0x20000)++0x07
line.quad 0x00 "AM_ERR,Error Status Register"
bitfld.quad 0x00 40. " E40 ,SIB portcheck error" "No error,Error"
bitfld.quad 0x00 34. "          E34 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 33. "          E33 ,Capture counter1 overflow error" "No error,Error"
bitfld.quad 0x00 32. "          E32 ,Capture counter0 overflow error" "No error,Error"
newline
bitfld.quad 0x00 24. " E24 ,Unexpected narrow write error" "No error,Error"
bitfld.quad 0x00 23. "          E23 ,Write WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 22. "          E22 ,Write response timeout error" "No error,Error"
bitfld.quad 0x00 21. "          E21 ,Write address multi-hit error" "No error,Error"
newline
bitfld.quad 0x00 20. " E20 ,Write exclusive split error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Write slave error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write address decode error from slave error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Local write address decode error" "No error,Error"
bitfld.quad 0x00 8. "          E8  ,Unexpected narrow read error" "No error,Error"
bitfld.quad 0x00 7. "          E7  ,Read WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 6. "          E6  ,Read response timeout error" "No error,Error"
newline
bitfld.quad 0x00 5. " E5  ,Read address multi-hit error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read exclusive split error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Read slave error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read address decode from slave error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Read decode response error" "No error,Error"
group.quad (0x3BE40+-0x20000)++0x07
line.quad 0x00 "AM_INTM,Interrupt Mask Register"
bitfld.quad 0x00 40. " M40 ,Mask interrupt for SIB portcheck error" "0,1"
bitfld.quad 0x00 34. "                 M34 ,Mask interrupt on traffic to PG layer" "0,1"
bitfld.quad 0x00 33. "                 M33 ,Capture counter1 overflow interrupt mask" "0,1"
bitfld.quad 0x00 32. "                 M32 ,Capture counter0 overflow interrupt mask" "0,1"
newline
bitfld.quad 0x00 24. " M24 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 23. "                 M23 ,Write WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 22. "                 M22 ,Write response timeout interrupt mask" "0,1"
bitfld.quad 0x00 21. "                 M21 ,Write address multi-hit interrupt mask" "0,1"
newline
bitfld.quad 0x00 20. " M20 ,Write exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Non modifiable WRAP mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write slave interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write address decode error from slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Local write address decode interrupt mask" "0,1"
bitfld.quad 0x00 8. "                 M8  ,Unexpected narrow read interrupt mask" "0,1"
bitfld.quad 0x00 7. "                 M7  ,Read WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 6. "                 M6  ,Read response timeout interrupt mask" "0,1"
newline
bitfld.quad 0x00 5. " M5  ,Read address multi-hit mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Non modifiable WRAP interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read address decode from slave interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read decode response interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0x20000)++0x07
line.quad 0x00 "AM_STS,AM_STS"
bitfld.quad 0x00 7. " AWO ,Write commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 6. "   ARO ,Read commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 5. "   AWS ,AW channel is stalled on hazard" "Not stalled,Stalled"
bitfld.quad 0x00 4. "       ARS ,AR channel is stalled on hazard" "Not stalled,Stalled"
newline
bitfld.quad 0x00 1. " WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0x20000+0x00)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0x20000+0x00)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0x20000+0x00)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0x20000+0x00)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0x20000+0x00)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0x20000+0x00)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0x20000+0x00)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0x20000+0x00)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0x20000+0x00)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0x20000+0x00)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0x20000+0x00)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0x20000+0x00)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0x20000+0x00)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0x20000+0x00)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0x20000+0x00)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0x20000+0x00)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0x20000+0x00)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0x20000+0x00)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0x20000+0x00)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0x20000+0x00)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0x20000+0x00)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0x20000+0x00)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0x20000+0x00)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0x20000+0x00)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0x20000+0x00)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0x20000+0x00)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0x20000+0x00)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0x20000+0x00)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0x20000+0x00)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
newline
width 16.
rgroup.quad (0x3BD08+-0x1E000)++0x07
line.quad 0x00 "AS_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0x1E000)++0x07
line.quad 0x00 "AS_ERR,Error Status Register"
bitfld.quad 0x00 32. " E32 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Write command modified error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Unknown write response destination error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write slave response error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Write decode response error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read command modified error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Interleaved read response error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Unknown read response destination error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read slave response error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Local read address decode error" "No error,Error"
group.quad (0x3BE40+-0x1E000)++0x07
line.quad 0x00 "AS_INTM,Interrupt Mask Register"
bitfld.quad 0x00 32. " M32 ,Traffic to PG layer interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read channel interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0x1E000)++0x07
line.quad 0x00 "AS_STS,AS_STS"
bitfld.quad 0x00 3. " ROE ,Read commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 2. "   WOE ,Write commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 1. "   ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0x1E000+0x2000)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0x1E000+0x2000)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0x1E000+0x2000)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0x1E000+0x2000)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0x1E000+0x2000)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0x1E000+0x2000)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0x1E000+0x2000)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0x1E000+0x2000)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0x1E000+0x2000)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0x1E000+0x2000)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0x1E000+0x2000)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0x1E000+0x2000)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0x1E000+0x2000)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0x1E000+0x2000)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree "BRIDGE MEM0 SPRT 13 118 Registers"
width 16.
rgroup.quad (0x3BD08+-0x1A000)++0x07
line.quad 0x00 "AS_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0x1A000)++0x07
line.quad 0x00 "AS_ERR,Error Status Register"
bitfld.quad 0x00 32. " E32 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Write command modified error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Unknown write response destination error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write slave response error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Write decode response error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read command modified error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Interleaved read response error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Unknown read response destination error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read slave response error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Local read address decode error" "No error,Error"
group.quad (0x3BE40+-0x1A000)++0x07
line.quad 0x00 "AS_INTM,Interrupt Mask Register"
bitfld.quad 0x00 32. " M32 ,Traffic to PG layer interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read channel interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0x1A000)++0x07
line.quad 0x00 "AS_STS,AS_STS"
bitfld.quad 0x00 3. " ROE ,Read commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 2. "   WOE ,Write commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 1. "   ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0x1A000+0x2000)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0x1A000+0x2000)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0x1A000+0x2000)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0x1A000+0x2000)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0x1A000+0x2000)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0x1A000+0x2000)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0x1A000+0x2000)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0x1A000+0x2000)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0x1A000+0x2000)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0x1A000+0x2000)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0x1A000+0x2000)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0x1A000+0x2000)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0x1A000+0x2000)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0x1A000+0x2000)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree "BRIDGE RAM SPRT 14 80 Registers"
width 16.
rgroup.quad (0x3BD08+-0x16000)++0x07
line.quad 0x00 "AS_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0x16000)++0x07
line.quad 0x00 "AS_ERR,Error Status Register"
bitfld.quad 0x00 32. " E32 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Write command modified error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Unknown write response destination error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write slave response error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Write decode response error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read command modified error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Interleaved read response error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Unknown read response destination error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read slave response error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Local read address decode error" "No error,Error"
group.quad (0x3BE40+-0x16000)++0x07
line.quad 0x00 "AS_INTM,Interrupt Mask Register"
bitfld.quad 0x00 32. " M32 ,Traffic to PG layer interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read channel interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read channel interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read channel interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0x16000)++0x07
line.quad 0x00 "AS_STS,AS_STS"
bitfld.quad 0x00 3. " ROE ,Read commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 2. "   WOE ,Write commands outstanding to the attached slave device" "Not outstanding,Outstanding"
bitfld.quad 0x00 1. "   ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0x16000+0x2000)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0x16000+0x2000)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0x16000+0x2000)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0x16000+0x2000)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0x16000+0x2000)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0x16000+0x2000)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0x16000+0x2000)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0x16000+0x2000)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0x16000+0x2000)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0x16000+0x2000)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0x16000+0x2000)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0x16000+0x2000)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0x16000+0x2000)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0x16000+0x2000)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
tree "BRIDGE TCU MPRT 3 70 Registers"
width 39.
group.quad (0x4440+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4460+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4480+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44A0+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44C0+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x44E0+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4500+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4520+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4540+0x27FC0)++0x07
line.quad 0x00 "AM_ADBASE_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45C0+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x45E0+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4600+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4620+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4640+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4660+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4680+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46A0+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46C0+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x46E0+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4700+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
group.quad (0x4720+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADBASE_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
rbitfld.quad 0x00 5. "  LLC ,LLC disable" "No,Yes"
bitfld.quad 0x00 4. "  DI ,Address range disable" "No,Yes"
bitfld.quad 0x00 3. "  R_WN ,Write/read to range" "Write,Read"
newline
bitfld.quad 0x00 2. " I            ,Instruction" "0,1"
bitfld.quad 0x00 1. "                 NS  ,Non-secure" "0,1"
bitfld.quad 0x00 0. "    P  ,Privileged" "0,1"
width 0x0B
newline
width 39.
group.quad (0x4448+0x27FC0)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0A_0,IOSPACE 0A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4468+0x27FC0)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE0B_0,IOSPACE 0B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4488+0x27FC0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1A_0,IOSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44A8+0x27FC0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1B_0,IOSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44C8+0x27FC0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1C_0,IOSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x44E8+0x27FC0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1D_0,IOSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4508+0x27FC0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1E_0,IOSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4528+0x27FC0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1F_0,IOSPACE 1F 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x4548+0x27FC0+0x00)++0x07
line.quad 0x00 "AM_ADMASK_MEM_IOS_SPRT_IOSPACE1G_0,IOSPACE 1G 0"
hexmask.quad 0x00 6.--63. 0x40 " MASK         ,Mask"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction field is valid" "Not valid,Valid"
bitfld.quad 0x00 1. "  NS ,Non-secure field is valid" "Not valid,Valid"
newline
bitfld.quad 0x00 0. " P            ,Privileged field is valid" "Not valid,Valid"
group.quad (0x45C8+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_AMASK_MEM_MEM0_SPRT_MEMSPACE0_0,MEMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x45E8+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1A_0,MEMSPACE 1A 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4608+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1B_0,MEMSPACE 1B 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4628+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1C_0,MEMSPACE 1C 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4648+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1D_0,MEMSPACE 1D 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4668+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_MEM0_SPRT_MEMSPACE1E_0,MEMSPACE 1E 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4688+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE0_0,RAMSPACE 0 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46A8+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE1_0,RAMSPACE 1 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46C8+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE2_0,RAMSPACE 2 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x46E8+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE3_0,RAMSPACE 3 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4708+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE4_0,RAMSPACE 4 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
group.quad (0x4728+0x27FC0+-0x60)++0x07
line.quad 0x00 "AM_ADMASK_MEM_RAM_SPRT_RAMSPACE5_0,RAMSPACE 5 0"
hexmask.quad 0x00 6.--63. 0x40 " BASE_ADDRESS ,Base address"
bitfld.quad 0x00 3. "  VALID ,R_Wn field is valid" "Not valid,Valid"
bitfld.quad 0x00 2. "  I ,Instruction" "0,1"
bitfld.quad 0x00 1. "          NS ,Non-secure" "0,1"
newline
bitfld.quad 0x00 0. " P            ,Privileged" "0,1"
width 0x0B
newline
width 16.
rgroup.quad (0x3BD08+-0xC000)++0x07
line.quad 0x00 "AM_BRIDGE_ID,Identifier Assigned To The Master Bridge Register"
hexmask.quad.byte 0x00 0.--7. 1. " ID  ,Unique bridge ID"
group.quad (0x3BE00+-0xC000)++0x07
line.quad 0x00 "AM_ERR,Error Status Register"
bitfld.quad 0x00 40. " E40 ,SIB portcheck error" "No error,Error"
bitfld.quad 0x00 34. "          E34 ,Traffic sent to a NoC layer which is power gate error" "No error,Error"
bitfld.quad 0x00 33. "          E33 ,Capture counter1 overflow error" "No error,Error"
bitfld.quad 0x00 32. "          E32 ,Capture counter0 overflow error" "No error,Error"
newline
bitfld.quad 0x00 24. " E24 ,Unexpected narrow write error" "No error,Error"
bitfld.quad 0x00 23. "          E23 ,Write WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 22. "          E22 ,Write response timeout error" "No error,Error"
bitfld.quad 0x00 21. "          E21 ,Write address multi-hit error" "No error,Error"
newline
bitfld.quad 0x00 20. " E20 ,Write exclusive split error" "No error,Error"
bitfld.quad 0x00 19. "          E19 ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 18. "          E18 ,Write slave error" "No error,Error"
bitfld.quad 0x00 17. "          E17 ,Write address decode error from slave error" "No error,Error"
newline
bitfld.quad 0x00 16. " E16 ,Local write address decode error" "No error,Error"
bitfld.quad 0x00 8. "          E8  ,Unexpected narrow read error" "No error,Error"
bitfld.quad 0x00 7. "          E7  ,Read WRAP not equal to supported cacheline size error" "No error,Error"
bitfld.quad 0x00 6. "          E6  ,Read response timeout error" "No error,Error"
newline
bitfld.quad 0x00 5. " E5  ,Read address multi-hit error" "No error,Error"
bitfld.quad 0x00 4. "          E4  ,Read exclusive split error" "No error,Error"
bitfld.quad 0x00 3. "          E3  ,Non modifiable WRAP error" "No error,Error"
bitfld.quad 0x00 2. "          E2  ,Read slave error" "No error,Error"
newline
bitfld.quad 0x00 1. " E1  ,Read address decode from slave error" "No error,Error"
bitfld.quad 0x00 0. "          E0  ,Read decode response error" "No error,Error"
group.quad (0x3BE40+-0xC000)++0x07
line.quad 0x00 "AM_INTM,Interrupt Mask Register"
bitfld.quad 0x00 40. " M40 ,Mask interrupt for SIB portcheck error" "0,1"
bitfld.quad 0x00 34. "                 M34 ,Mask interrupt on traffic to PG layer" "0,1"
bitfld.quad 0x00 33. "                 M33 ,Capture counter1 overflow interrupt mask" "0,1"
bitfld.quad 0x00 32. "                 M32 ,Capture counter0 overflow interrupt mask" "0,1"
newline
bitfld.quad 0x00 24. " M24 ,Write channel interrupt mask" "0,1"
bitfld.quad 0x00 23. "                 M23 ,Write WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 22. "                 M22 ,Write response timeout interrupt mask" "0,1"
bitfld.quad 0x00 21. "                 M21 ,Write address multi-hit interrupt mask" "0,1"
newline
bitfld.quad 0x00 20. " M20 ,Write exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 19. "                 M19 ,Non modifiable WRAP mask" "0,1"
bitfld.quad 0x00 18. "                 M18 ,Write slave interrupt mask" "0,1"
bitfld.quad 0x00 17. "                 M17 ,Write address decode error from slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 16. " M16 ,Local write address decode interrupt mask" "0,1"
bitfld.quad 0x00 8. "                 M8  ,Unexpected narrow read interrupt mask" "0,1"
bitfld.quad 0x00 7. "                 M7  ,Read WRAP not equal to supported cacheline size interrupt mask" "0,1"
bitfld.quad 0x00 6. "                 M6  ,Read response timeout interrupt mask" "0,1"
newline
bitfld.quad 0x00 5. " M5  ,Read address multi-hit mask" "0,1"
bitfld.quad 0x00 4. "                 M4  ,Read exclusive split interrupt mask" "0,1"
bitfld.quad 0x00 3. "                 M3  ,Non modifiable WRAP interrupt mask" "0,1"
bitfld.quad 0x00 2. "                 M2  ,Read slave interrupt mask" "0,1"
newline
bitfld.quad 0x00 1. " M1  ,Read address decode from slave interrupt mask" "0,1"
bitfld.quad 0x00 0. "                 M0  ,Read decode response interrupt mask" "0,1"
rgroup.quad (0x3BD00+-0xC000)++0x07
line.quad 0x00 "AM_STS,AM_STS"
bitfld.quad 0x00 7. " AWO ,Write commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 6. "   ARO ,Read commands are outstanding to the slave specified in OSSLV register" "Not outstanding,Outstanding"
bitfld.quad 0x00 5. "   AWS ,AW channel is stalled on hazard" "Not stalled,Stalled"
bitfld.quad 0x00 4. "       ARS ,AR channel is stalled on hazard" "Not stalled,Stalled"
newline
bitfld.quad 0x00 1. " WOF ,No more requests of write commands can be accepted" "Accept more,No more requests"
bitfld.quad 0x00 0. "  ROF ,No more requests of read commands can be accepted" "Accept more,No more requests"
newline
rgroup.long (0x38130+-0xC000+0x00)++0x03
line.long 0x00 "BRS_0,Bridge Receive Status 0"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop0" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 0" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop0" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 0" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 0" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop0" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 0" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 0" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop0" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 0" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38138+-0xC000+0x00)++0x03
line.long 0x00 "BRS_1,Bridge Receive Status 1"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop1" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 1" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop1" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 1" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 1" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop1" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 1" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 1" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop1" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 1" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38140+-0xC000+0x00)++0x03
line.long 0x00 "BRS_2,Bridge Receive Status 2"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop2" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 2" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop2" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 2" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 2" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop2" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 2" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 2" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop2" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 2" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38148+-0xC000+0x00)++0x03
line.long 0x00 "BRS_3,Bridge Receive Status 3"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop3" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 3" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop3" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 3" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 3" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop3" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 3" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 3" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop3" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 3" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38150+-0xC000+0x00)++0x03
line.long 0x00 "BRS_4,Bridge Receive Status 4"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop4" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 4" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop4" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 4" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 4" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop4" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 4" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 4" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop4" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 4" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38158+-0xC000+0x00)++0x03
line.long 0x00 "BRS_5,Bridge Receive Status 5"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop5" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 5" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop5" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 5" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 5" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop5" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 5" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 5" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop5" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 5" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38160+-0xC000+0x00)++0x03
line.long 0x00 "BRS_6,Bridge Receive Status 6"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop6" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 6" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop6" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 6" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 6" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop6" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 6" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 6" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop6" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 6" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38168+-0xC000+0x00)++0x03
line.long 0x00 "BRS_7,Bridge Receive Status 7"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop7" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 7" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop7" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 7" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 7" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop7" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 7" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 7" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop7" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 7" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38170+-0xC000+0x00)++0x03
line.long 0x00 "BRS_8,Bridge Receive Status 8"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop8" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 8" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop8" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 8" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 8" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop8" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 8" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 8" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop8" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 8" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38178+-0xC000+0x00)++0x03
line.long 0x00 "BRS_9,Bridge Receive Status 9"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop9" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 9" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop9" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 9" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 9" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop9" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 9" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 9" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop9" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 9" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38180+-0xC000+0x00)++0x03
line.long 0x00 "BRS_10,Bridge Receive Status 10"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop10" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 10" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop10" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 10" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 10" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop10" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 10" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 10" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop10" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 10" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38188+-0xC000+0x00)++0x03
line.long 0x00 "BRS_11,Bridge Receive Status 11"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop11" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 11" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop11" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 11" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 11" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop11" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 11" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 11" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop11" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 11" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38190+-0xC000+0x00)++0x03
line.long 0x00 "BRS_12,Bridge Receive Status 12"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop12" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 12" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop12" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 12" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 12" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop12" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 12" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 12" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop12" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 12" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x38198+-0xC000+0x00)++0x03
line.long 0x00 "BRS_13,Bridge Receive Status 13"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop13" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 13" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop13" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 13" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 13" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop13" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 13" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 13" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop13" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 13" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A0+-0xC000+0x00)++0x03
line.long 0x00 "BRS_14,Bridge Receive Status 14"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop14" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 14" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop14" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 14" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 14" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop14" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 14" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 14" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop14" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 14" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
rgroup.long (0x381A8+-0xC000+0x00)++0x03
line.long 0x00 "BRS_15,Bridge Receive Status 15"
bitfld.long 0x00 29. " F_3    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 28. "  B_3    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 27. "  S_3    ,Head flit sop15" "0,1"
bitfld.long 0x00 26. "  V_3    ,Head flit (buffer ready) 15" "0,1"
newline
bitfld.long 0x00 24.--25. " OUTI_3 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 21. "  F_2    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 20. "  B_2    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 19. "  S_2    ,Head flit sop15" "0,1"
newline
bitfld.long 0x00 18. " V_2    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 16.--17. "  OUTI_2 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 13. "  F_1    ,Buffer full for VC 15" "0,1"
bitfld.long 0x00 12. "  B_1    ,Head flit barrier state for VC 15" "0,1"
newline
bitfld.long 0x00 11. " S_1    ,Head flit sop15" "0,1"
bitfld.long 0x00 10. "  V_1    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 8.--9. "  OUTI_1 ,Head flit output interface" "0,1,2,3"
bitfld.long 0x00 5. "  F_0    ,Buffer full for VC 15" "0,1"
newline
bitfld.long 0x00 4. " B_0    ,Head flit barrier state for VC 15" "0,1"
bitfld.long 0x00 3. "  S_0    ,Head flit sop15" "0,1"
bitfld.long 0x00 2. "  V_0    ,Head flit (buffer ready) 15" "0,1"
bitfld.long 0x00 0.--1. "  OUTI_0 ,Head flit output interface" "0,1,2,3"
newline
rgroup.long (0x381B0+-0xC000+0x00)++0x03
line.long 0x00 "BRUS,Bridge Receiver Upsizer/Downsizer Structure Status"
bitfld.long 0x00 3. " VALID_IF_D ,Interface D upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 2. "  VALID_IF_C ,Interface C upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 1. "  VALID_IF_B ,Interface B upsizer/downsizer valid" "Not valid,Valid"
bitfld.long 0x00 0. "  VALID_IF_A ,Interface A upsizer/downsizer valid" "Not valid,Valid"
newline
group.long (0x38080+-0xC000+0x00)++0x03
line.long 0x00 "BTRL_0,Transmitting Bridge Identifier 0"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38088+-0xC000+0x00)++0x03
line.long 0x00 "BTRL_1,Transmitting Bridge Identifier 1"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38090+-0xC000+0x00)++0x03
line.long 0x00 "BTRL_2,Transmitting Bridge Identifier 2"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
group.long (0x38098+-0xC000+0x00)++0x03
line.long 0x00 "BTRL_3,Transmitting Bridge Identifier 3"
bitfld.long 0x00 20. " EN ,Rate limit logic enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "  CNT ,Max count value for token" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "  WT ,Starting weight"
newline
rgroup.long (0x38058+-0xC000+0x00)++0x03
line.long 0x00 "BTUS_0,Bridge Transmitter Upsizer/Downsizer Structure Status 0"
bitfld.long 0x00 31. " NOC_7_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_7_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_7_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_7_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_6_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_6_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_6_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_6_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_5_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_5_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_5_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_5_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_4_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_4_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_4_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_4_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_3_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_3_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_3_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_3_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_2_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_2_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_2_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_2_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_1_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_1_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_1_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_1_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_0_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_0_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_0_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_0_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
rgroup.long (0x38060+-0xC000+0x00)++0x03
line.long 0x00 "BTUS_1,Bridge Transmitter Upsizer/Downsizer Structure Status 1"
bitfld.long 0x00 31. " NOC_15_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 30. "  NOC_15_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 29. "  NOC_15_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 28. "  NOC_15_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 27. " NOC_14_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 26. "  NOC_14_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 25. "  NOC_14_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 24. "  NOC_14_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 23. " NOC_13_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 22. "  NOC_13_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 21. "  NOC_13_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 20. "  NOC_13_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 19. " NOC_12_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 18. "  NOC_12_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 17. "  NOC_12_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 16. "  NOC_12_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 15. " NOC_11_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 14. "  NOC_11_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 13. "  NOC_11_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 12. "  NOC_11_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 11. " NOC_10_INTF_D_STS ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 10. "  NOC_10_INTF_C_STS ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 9. "  NOC_10_INTF_B_STS ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 8. "  NOC_10_INTF_A_STS ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 7. " NOC_9_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 6. "  NOC_9_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 5. "  NOC_9_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 4. "  NOC_9_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
bitfld.long 0x00 3. " NOC_8_INTF_D_STS  ,Interface upsizer/downsizer status for interface D" "Downsizer,Upsizer"
bitfld.long 0x00 2. "  NOC_8_INTF_C_STS  ,Interface upsizer/downsizer status for interface C" "Downsizer,Upsizer"
bitfld.long 0x00 1. "  NOC_8_INTF_B_STS  ,Interface upsizer/downsizer status for interface B" "Downsizer,Upsizer"
bitfld.long 0x00 0. "  NOC_8_INTF_A_STS  ,Interface upsizer/downsizer status for interface A" "Downsizer,Upsizer"
newline
group.long (0x38000+-0xC000+0x00)++0x03
line.long 0x00 "P_0,Each QOS Weight Value 0"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_3  ,Weight of QoS profile 3"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_2  ,Weight of QoS profile 2"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_1  ,Weight of QoS profile 1"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_0  ,Weight of QoS profile 0"
group.long (0x38008+-0xC000+0x00)++0x03
line.long 0x00 "P_1,Each QOS Weight Value 1]"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_7  ,Weight of QoS profile 7"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_6  ,Weight of QoS profile 6"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_5  ,Weight of QoS profile 5"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_4  ,Weight of QoS profile 4"
group.long (0x38010+-0xC000+0x00)++0x03
line.long 0x00 "P_2,Each QOS Weight Value 2"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_11 ,Weight of QoS profile 11"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_10 ,Weight of QoS profile 10"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_9  ,Weight of QoS profile 9"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_8  ,Weight of QoS profile 8"
group.long (0x38018+-0xC000+0x00)++0x03
line.long 0x00 "P_3,Each QOS Weight Value 3"
hexmask.long.byte 0x00 24.--31. 1. " WT_QOS_15 ,Weight of QoS profile 15"
hexmask.long.byte 0x00 16.--23. 1. "  WT_QOS_14 ,Weight of QoS profile 14"
hexmask.long.byte 0x00 8.--15. 1. "  WT_QOS_13 ,Weight of QoS profile 13"
hexmask.long.byte 0x00 0.--7. 1. "  WT_QOS_12 ,Weight of QoS profile 12"
rgroup.long (0x381B8+-0xC000+0x00)++0x03
line.long 0x00 "RXID,Receiving Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
rgroup.long (0x38078+-0xC000+0x00)++0x03
line.long 0x00 "TXID,Transmitting Bridge Identifier"
hexmask.long.byte 0x00 0.--7. 1. " ID        ,Identifier assigned to the bridge"
width 0x0B
tree.end
width 23.
tree "AGENT CC0 CCC Registers"
rgroup.quad 0x30020++0x07
line.quad 0x00 "ACTIVE_VECTOR_0,Currently Active Vector"
bitfld.quad 0x00 63. " ACTIVE_AGENT_VECTOR[63] ,ACE agent enable [63]" "Disabled,Enabled"
bitfld.quad 0x00 62. "  [62] ,ACE agent enable [62]" "Disabled,Enabled"
bitfld.quad 0x00 61. "  [61] ,ACE agent enable [61]" "Disabled,Enabled"
bitfld.quad 0x00 60. "  [60] ,ACE agent enable [60]" "Disabled,Enabled"
newline
bitfld.quad 0x00 59. " [59]                    ,ACE agent enable [59]" "Disabled,Enabled"
bitfld.quad 0x00 58. "  [58] ,ACE agent enable [58]" "Disabled,Enabled"
bitfld.quad 0x00 57. "  [57] ,ACE agent enable [57]" "Disabled,Enabled"
bitfld.quad 0x00 56. "  [56] ,ACE agent enable [56]" "Disabled,Enabled"
newline
bitfld.quad 0x00 55. " [55]                    ,ACE agent enable [55]" "Disabled,Enabled"
bitfld.quad 0x00 54. "  [54] ,ACE agent enable [54]" "Disabled,Enabled"
bitfld.quad 0x00 53. "  [53] ,ACE agent enable [53]" "Disabled,Enabled"
bitfld.quad 0x00 52. "  [52] ,ACE agent enable [52]" "Disabled,Enabled"
newline
bitfld.quad 0x00 51. " [51]                    ,ACE agent enable [51]" "Disabled,Enabled"
bitfld.quad 0x00 50. "  [50] ,ACE agent enable [50]" "Disabled,Enabled"
bitfld.quad 0x00 49. "  [49] ,ACE agent enable [49]" "Disabled,Enabled"
bitfld.quad 0x00 48. "  [48] ,ACE agent enable [48]" "Disabled,Enabled"
newline
bitfld.quad 0x00 47. " [47]                    ,ACE agent enable [47]" "Disabled,Enabled"
bitfld.quad 0x00 46. "  [46] ,ACE agent enable [46]" "Disabled,Enabled"
bitfld.quad 0x00 45. "  [45] ,ACE agent enable [45]" "Disabled,Enabled"
bitfld.quad 0x00 44. "  [44] ,ACE agent enable [44]" "Disabled,Enabled"
newline
bitfld.quad 0x00 43. " [43]                    ,ACE agent enable [43]" "Disabled,Enabled"
bitfld.quad 0x00 42. "  [42] ,ACE agent enable [42]" "Disabled,Enabled"
bitfld.quad 0x00 41. "  [41] ,ACE agent enable [41]" "Disabled,Enabled"
bitfld.quad 0x00 40. "  [40] ,ACE agent enable [40]" "Disabled,Enabled"
newline
bitfld.quad 0x00 39. " [39]                    ,ACE agent enable [39]" "Disabled,Enabled"
bitfld.quad 0x00 38. "  [38] ,ACE agent enable [38]" "Disabled,Enabled"
bitfld.quad 0x00 37. "  [37] ,ACE agent enable [37]" "Disabled,Enabled"
bitfld.quad 0x00 36. "  [36] ,ACE agent enable [36]" "Disabled,Enabled"
newline
bitfld.quad 0x00 35. " [35]                    ,ACE agent enable [35]" "Disabled,Enabled"
bitfld.quad 0x00 34. "  [34] ,ACE agent enable [34]" "Disabled,Enabled"
bitfld.quad 0x00 33. "  [33] ,ACE agent enable [33]" "Disabled,Enabled"
bitfld.quad 0x00 32. "  [32] ,ACE agent enable [32]" "Disabled,Enabled"
newline
bitfld.quad 0x00 31. " [31]                    ,ACE agent enable [31]" "Disabled,Enabled"
bitfld.quad 0x00 30. "  [30] ,ACE agent enable [30]" "Disabled,Enabled"
bitfld.quad 0x00 29. "  [29] ,ACE agent enable [29]" "Disabled,Enabled"
bitfld.quad 0x00 28. "  [28] ,ACE agent enable [28]" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. " [27]                    ,ACE agent enable [27]" "Disabled,Enabled"
bitfld.quad 0x00 26. "  [26] ,ACE agent enable [26]" "Disabled,Enabled"
bitfld.quad 0x00 25. "  [25] ,ACE agent enable [25]" "Disabled,Enabled"
bitfld.quad 0x00 24. "  [24] ,ACE agent enable [24]" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. " [23]                    ,ACE agent enable [23]" "Disabled,Enabled"
bitfld.quad 0x00 22. "  [22] ,ACE agent enable [22]" "Disabled,Enabled"
bitfld.quad 0x00 21. "  [21] ,ACE agent enable [21]" "Disabled,Enabled"
bitfld.quad 0x00 20. "  [20] ,ACE agent enable [20]" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. " [19]                    ,ACE agent enable [19]" "Disabled,Enabled"
bitfld.quad 0x00 18. "  [18] ,ACE agent enable [18]" "Disabled,Enabled"
bitfld.quad 0x00 17. "  [17] ,ACE agent enable [17]" "Disabled,Enabled"
bitfld.quad 0x00 16. "  [16] ,ACE agent enable [16]" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. " [15]                    ,ACE agent enable [15]" "Disabled,Enabled"
bitfld.quad 0x00 14. "  [14] ,ACE agent enable [14]" "Disabled,Enabled"
bitfld.quad 0x00 13. "  [13] ,ACE agent enable [13]" "Disabled,Enabled"
bitfld.quad 0x00 12. "  [12] ,ACE agent enable [12]" "Disabled,Enabled"
newline
bitfld.quad 0x00 11. " [11]                    ,ACE agent enable [11]" "Disabled,Enabled"
bitfld.quad 0x00 10. "  [10] ,ACE agent enable [10]" "Disabled,Enabled"
bitfld.quad 0x00 9. "  [9]  ,ACE agent enable [9]" "Disabled,Enabled"
bitfld.quad 0x00 8. "  [8]  ,ACE agent enable [8]" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. " [7]                     ,ACE agent enable [7]" "Disabled,Enabled"
bitfld.quad 0x00 6. "  [6]  ,ACE agent enable [6]" "Disabled,Enabled"
bitfld.quad 0x00 5. "  [5]  ,ACE agent enable [5]" "Disabled,Enabled"
bitfld.quad 0x00 4. "  [4]  ,ACE agent enable [4]" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. " [3]                     ,ACE agent enable [3]" "Disabled,Enabled"
bitfld.quad 0x00 2. "  [2]  ,ACE agent enable [2]" "Disabled,Enabled"
bitfld.quad 0x00 1. "  [1]  ,ACE agent enable [1]" "Disabled,Enabled"
bitfld.quad 0x00 0. "  [0]  ,ACE agent enable [0]" "Disabled,Enabled"
newline
rgroup.quad 0x30038++0x07
line.quad 0x00 "AGENT_DISABLE_STATUS,Agent Disable Status"
bitfld.quad 0x00 0. " STAT ,Stat" "Outstanding,Completed for disabled agents"
newline
rgroup.quad 0x30140++0x07
line.quad 0x00 "CRT_STATUS_0,Coherency Request Trackers Current State"
bitfld.quad 0x00 63. " CRT_STATUS[63] ,Request still in flight [63]" "No,Yes"
bitfld.quad 0x00 62. "  [62] ,Request still in flight [62]" "No,Yes"
bitfld.quad 0x00 61. "  [61] ,Request still in flight [61]" "No,Yes"
bitfld.quad 0x00 60. "  [60] ,Request still in flight [60]" "No,Yes"
newline
bitfld.quad 0x00 59. " [59]           ,Request still in flight [59]" "No,Yes"
bitfld.quad 0x00 58. "  [58] ,Request still in flight [58]" "No,Yes"
bitfld.quad 0x00 57. "  [57] ,Request still in flight [57]" "No,Yes"
bitfld.quad 0x00 56. "  [56] ,Request still in flight [56]" "No,Yes"
newline
bitfld.quad 0x00 55. " [55]           ,Request still in flight [55]" "No,Yes"
bitfld.quad 0x00 54. "  [54] ,Request still in flight [54]" "No,Yes"
bitfld.quad 0x00 53. "  [53] ,Request still in flight [53]" "No,Yes"
bitfld.quad 0x00 52. "  [52] ,Request still in flight [52]" "No,Yes"
newline
bitfld.quad 0x00 51. " [51]           ,Request still in flight [51]" "No,Yes"
bitfld.quad 0x00 50. "  [50] ,Request still in flight [50]" "No,Yes"
bitfld.quad 0x00 49. "  [49] ,Request still in flight [49]" "No,Yes"
bitfld.quad 0x00 48. "  [48] ,Request still in flight [48]" "No,Yes"
newline
bitfld.quad 0x00 47. " [47]           ,Request still in flight [47]" "No,Yes"
bitfld.quad 0x00 46. "  [46] ,Request still in flight [46]" "No,Yes"
bitfld.quad 0x00 45. "  [45] ,Request still in flight [45]" "No,Yes"
bitfld.quad 0x00 44. "  [44] ,Request still in flight [44]" "No,Yes"
newline
bitfld.quad 0x00 43. " [43]           ,Request still in flight [43]" "No,Yes"
bitfld.quad 0x00 42. "  [42] ,Request still in flight [42]" "No,Yes"
bitfld.quad 0x00 41. "  [41] ,Request still in flight [41]" "No,Yes"
bitfld.quad 0x00 40. "  [40] ,Request still in flight [40]" "No,Yes"
newline
bitfld.quad 0x00 39. " [39]           ,Request still in flight [39]" "No,Yes"
bitfld.quad 0x00 38. "  [38] ,Request still in flight [38]" "No,Yes"
bitfld.quad 0x00 37. "  [37] ,Request still in flight [37]" "No,Yes"
bitfld.quad 0x00 36. "  [36] ,Request still in flight [36]" "No,Yes"
newline
bitfld.quad 0x00 35. " [35]           ,Request still in flight [35]" "No,Yes"
bitfld.quad 0x00 34. "  [34] ,Request still in flight [34]" "No,Yes"
bitfld.quad 0x00 33. "  [33] ,Request still in flight [33]" "No,Yes"
bitfld.quad 0x00 32. "  [32] ,Request still in flight [32]" "No,Yes"
newline
bitfld.quad 0x00 31. " [31]           ,Request still in flight [31]" "No,Yes"
bitfld.quad 0x00 30. "  [30] ,Request still in flight [30]" "No,Yes"
bitfld.quad 0x00 29. "  [29] ,Request still in flight [29]" "No,Yes"
bitfld.quad 0x00 28. "  [28] ,Request still in flight [28]" "No,Yes"
newline
bitfld.quad 0x00 27. " [27]           ,Request still in flight [27]" "No,Yes"
bitfld.quad 0x00 26. "  [26] ,Request still in flight [26]" "No,Yes"
bitfld.quad 0x00 25. "  [25] ,Request still in flight [25]" "No,Yes"
bitfld.quad 0x00 24. "  [24] ,Request still in flight [24]" "No,Yes"
newline
bitfld.quad 0x00 23. " [23]           ,Request still in flight [23]" "No,Yes"
bitfld.quad 0x00 22. "  [22] ,Request still in flight [22]" "No,Yes"
bitfld.quad 0x00 21. "  [21] ,Request still in flight [21]" "No,Yes"
bitfld.quad 0x00 20. "  [20] ,Request still in flight [20]" "No,Yes"
newline
bitfld.quad 0x00 19. " [19]           ,Request still in flight [19]" "No,Yes"
bitfld.quad 0x00 18. "  [18] ,Request still in flight [18]" "No,Yes"
bitfld.quad 0x00 17. "  [17] ,Request still in flight [17]" "No,Yes"
bitfld.quad 0x00 16. "  [16] ,Request still in flight [16]" "No,Yes"
newline
bitfld.quad 0x00 15. " [15]           ,Request still in flight [15]" "No,Yes"
bitfld.quad 0x00 14. "  [14] ,Request still in flight [14]" "No,Yes"
bitfld.quad 0x00 13. "  [13] ,Request still in flight [13]" "No,Yes"
bitfld.quad 0x00 12. "  [12] ,Request still in flight [12]" "No,Yes"
newline
bitfld.quad 0x00 11. " [11]           ,Request still in flight [11]" "No,Yes"
bitfld.quad 0x00 10. "  [10] ,Request still in flight [10]" "No,Yes"
bitfld.quad 0x00 9. "  [9]  ,Request still in flight [9]" "No,Yes"
bitfld.quad 0x00 8. "  [8]  ,Request still in flight [8]" "No,Yes"
newline
bitfld.quad 0x00 7. " [7]            ,Request still in flight [7]" "No,Yes"
bitfld.quad 0x00 6. "  [6]  ,Request still in flight [6]" "No,Yes"
bitfld.quad 0x00 5. "  [5]  ,Request still in flight [5]" "No,Yes"
bitfld.quad 0x00 4. "  [4]  ,Request still in flight [4]" "No,Yes"
newline
bitfld.quad 0x00 3. " [3]            ,Request still in flight [3]" "No,Yes"
bitfld.quad 0x00 2. "  [2]  ,Request still in flight [2]" "No,Yes"
bitfld.quad 0x00 1. "  [1]  ,Request still in flight [1]" "No,Yes"
bitfld.quad 0x00 0. "  [0]  ,Request still in flight [0]" "No,Yes"
rgroup.quad 0x30148++0x07
line.quad 0x00 "CRT_STATUS_1,Coherency Request Trackers Current State"
bitfld.quad 0x00 63. " CRT_STATUS[63] ,Request still in flight [63]" "No,Yes"
bitfld.quad 0x00 62. "  [62] ,Request still in flight [62]" "No,Yes"
bitfld.quad 0x00 61. "  [61] ,Request still in flight [61]" "No,Yes"
bitfld.quad 0x00 60. "  [60] ,Request still in flight [60]" "No,Yes"
newline
bitfld.quad 0x00 59. " [59]           ,Request still in flight [59]" "No,Yes"
bitfld.quad 0x00 58. "  [58] ,Request still in flight [58]" "No,Yes"
bitfld.quad 0x00 57. "  [57] ,Request still in flight [57]" "No,Yes"
bitfld.quad 0x00 56. "  [56] ,Request still in flight [56]" "No,Yes"
newline
bitfld.quad 0x00 55. " [55]           ,Request still in flight [55]" "No,Yes"
bitfld.quad 0x00 54. "  [54] ,Request still in flight [54]" "No,Yes"
bitfld.quad 0x00 53. "  [53] ,Request still in flight [53]" "No,Yes"
bitfld.quad 0x00 52. "  [52] ,Request still in flight [52]" "No,Yes"
newline
bitfld.quad 0x00 51. " [51]           ,Request still in flight [51]" "No,Yes"
bitfld.quad 0x00 50. "  [50] ,Request still in flight [50]" "No,Yes"
bitfld.quad 0x00 49. "  [49] ,Request still in flight [49]" "No,Yes"
bitfld.quad 0x00 48. "  [48] ,Request still in flight [48]" "No,Yes"
newline
bitfld.quad 0x00 47. " [47]           ,Request still in flight [47]" "No,Yes"
bitfld.quad 0x00 46. "  [46] ,Request still in flight [46]" "No,Yes"
bitfld.quad 0x00 45. "  [45] ,Request still in flight [45]" "No,Yes"
bitfld.quad 0x00 44. "  [44] ,Request still in flight [44]" "No,Yes"
newline
bitfld.quad 0x00 43. " [43]           ,Request still in flight [43]" "No,Yes"
bitfld.quad 0x00 42. "  [42] ,Request still in flight [42]" "No,Yes"
bitfld.quad 0x00 41. "  [41] ,Request still in flight [41]" "No,Yes"
bitfld.quad 0x00 40. "  [40] ,Request still in flight [40]" "No,Yes"
newline
bitfld.quad 0x00 39. " [39]           ,Request still in flight [39]" "No,Yes"
bitfld.quad 0x00 38. "  [38] ,Request still in flight [38]" "No,Yes"
bitfld.quad 0x00 37. "  [37] ,Request still in flight [37]" "No,Yes"
bitfld.quad 0x00 36. "  [36] ,Request still in flight [36]" "No,Yes"
newline
bitfld.quad 0x00 35. " [35]           ,Request still in flight [35]" "No,Yes"
bitfld.quad 0x00 34. "  [34] ,Request still in flight [34]" "No,Yes"
bitfld.quad 0x00 33. "  [33] ,Request still in flight [33]" "No,Yes"
bitfld.quad 0x00 32. "  [32] ,Request still in flight [32]" "No,Yes"
newline
bitfld.quad 0x00 31. " [31]           ,Request still in flight [31]" "No,Yes"
bitfld.quad 0x00 30. "  [30] ,Request still in flight [30]" "No,Yes"
bitfld.quad 0x00 29. "  [29] ,Request still in flight [29]" "No,Yes"
bitfld.quad 0x00 28. "  [28] ,Request still in flight [28]" "No,Yes"
newline
bitfld.quad 0x00 27. " [27]           ,Request still in flight [27]" "No,Yes"
bitfld.quad 0x00 26. "  [26] ,Request still in flight [26]" "No,Yes"
bitfld.quad 0x00 25. "  [25] ,Request still in flight [25]" "No,Yes"
bitfld.quad 0x00 24. "  [24] ,Request still in flight [24]" "No,Yes"
newline
bitfld.quad 0x00 23. " [23]           ,Request still in flight [23]" "No,Yes"
bitfld.quad 0x00 22. "  [22] ,Request still in flight [22]" "No,Yes"
bitfld.quad 0x00 21. "  [21] ,Request still in flight [21]" "No,Yes"
bitfld.quad 0x00 20. "  [20] ,Request still in flight [20]" "No,Yes"
newline
bitfld.quad 0x00 19. " [19]           ,Request still in flight [19]" "No,Yes"
bitfld.quad 0x00 18. "  [18] ,Request still in flight [18]" "No,Yes"
bitfld.quad 0x00 17. "  [17] ,Request still in flight [17]" "No,Yes"
bitfld.quad 0x00 16. "  [16] ,Request still in flight [16]" "No,Yes"
newline
bitfld.quad 0x00 15. " [15]           ,Request still in flight [15]" "No,Yes"
bitfld.quad 0x00 14. "  [14] ,Request still in flight [14]" "No,Yes"
bitfld.quad 0x00 13. "  [13] ,Request still in flight [13]" "No,Yes"
bitfld.quad 0x00 12. "  [12] ,Request still in flight [12]" "No,Yes"
newline
bitfld.quad 0x00 11. " [11]           ,Request still in flight [11]" "No,Yes"
bitfld.quad 0x00 10. "  [10] ,Request still in flight [10]" "No,Yes"
bitfld.quad 0x00 9. "  [9]  ,Request still in flight [9]" "No,Yes"
bitfld.quad 0x00 8. "  [8]  ,Request still in flight [8]" "No,Yes"
newline
bitfld.quad 0x00 7. " [7]            ,Request still in flight [7]" "No,Yes"
bitfld.quad 0x00 6. "  [6]  ,Request still in flight [6]" "No,Yes"
bitfld.quad 0x00 5. "  [5]  ,Request still in flight [5]" "No,Yes"
bitfld.quad 0x00 4. "  [4]  ,Request still in flight [4]" "No,Yes"
newline
bitfld.quad 0x00 3. " [3]            ,Request still in flight [3]" "No,Yes"
bitfld.quad 0x00 2. "  [2]  ,Request still in flight [2]" "No,Yes"
bitfld.quad 0x00 1. "  [1]  ,Request still in flight [1]" "No,Yes"
bitfld.quad 0x00 0. "  [0]  ,Request still in flight [0]" "No,Yes"
rgroup.quad 0x30150++0x07
line.quad 0x00 "CRT_STATUS_2,Coherency Request Trackers Current State"
bitfld.quad 0x00 63. " CRT_STATUS[63] ,Request still in flight [63]" "No,Yes"
bitfld.quad 0x00 62. "  [62] ,Request still in flight [62]" "No,Yes"
bitfld.quad 0x00 61. "  [61] ,Request still in flight [61]" "No,Yes"
bitfld.quad 0x00 60. "  [60] ,Request still in flight [60]" "No,Yes"
newline
bitfld.quad 0x00 59. " [59]           ,Request still in flight [59]" "No,Yes"
bitfld.quad 0x00 58. "  [58] ,Request still in flight [58]" "No,Yes"
bitfld.quad 0x00 57. "  [57] ,Request still in flight [57]" "No,Yes"
bitfld.quad 0x00 56. "  [56] ,Request still in flight [56]" "No,Yes"
newline
bitfld.quad 0x00 55. " [55]           ,Request still in flight [55]" "No,Yes"
bitfld.quad 0x00 54. "  [54] ,Request still in flight [54]" "No,Yes"
bitfld.quad 0x00 53. "  [53] ,Request still in flight [53]" "No,Yes"
bitfld.quad 0x00 52. "  [52] ,Request still in flight [52]" "No,Yes"
newline
bitfld.quad 0x00 51. " [51]           ,Request still in flight [51]" "No,Yes"
bitfld.quad 0x00 50. "  [50] ,Request still in flight [50]" "No,Yes"
bitfld.quad 0x00 49. "  [49] ,Request still in flight [49]" "No,Yes"
bitfld.quad 0x00 48. "  [48] ,Request still in flight [48]" "No,Yes"
newline
bitfld.quad 0x00 47. " [47]           ,Request still in flight [47]" "No,Yes"
bitfld.quad 0x00 46. "  [46] ,Request still in flight [46]" "No,Yes"
bitfld.quad 0x00 45. "  [45] ,Request still in flight [45]" "No,Yes"
bitfld.quad 0x00 44. "  [44] ,Request still in flight [44]" "No,Yes"
newline
bitfld.quad 0x00 43. " [43]           ,Request still in flight [43]" "No,Yes"
bitfld.quad 0x00 42. "  [42] ,Request still in flight [42]" "No,Yes"
bitfld.quad 0x00 41. "  [41] ,Request still in flight [41]" "No,Yes"
bitfld.quad 0x00 40. "  [40] ,Request still in flight [40]" "No,Yes"
newline
bitfld.quad 0x00 39. " [39]           ,Request still in flight [39]" "No,Yes"
bitfld.quad 0x00 38. "  [38] ,Request still in flight [38]" "No,Yes"
bitfld.quad 0x00 37. "  [37] ,Request still in flight [37]" "No,Yes"
bitfld.quad 0x00 36. "  [36] ,Request still in flight [36]" "No,Yes"
newline
bitfld.quad 0x00 35. " [35]           ,Request still in flight [35]" "No,Yes"
bitfld.quad 0x00 34. "  [34] ,Request still in flight [34]" "No,Yes"
bitfld.quad 0x00 33. "  [33] ,Request still in flight [33]" "No,Yes"
bitfld.quad 0x00 32. "  [32] ,Request still in flight [32]" "No,Yes"
newline
bitfld.quad 0x00 31. " [31]           ,Request still in flight [31]" "No,Yes"
bitfld.quad 0x00 30. "  [30] ,Request still in flight [30]" "No,Yes"
bitfld.quad 0x00 29. "  [29] ,Request still in flight [29]" "No,Yes"
bitfld.quad 0x00 28. "  [28] ,Request still in flight [28]" "No,Yes"
newline
bitfld.quad 0x00 27. " [27]           ,Request still in flight [27]" "No,Yes"
bitfld.quad 0x00 26. "  [26] ,Request still in flight [26]" "No,Yes"
bitfld.quad 0x00 25. "  [25] ,Request still in flight [25]" "No,Yes"
bitfld.quad 0x00 24. "  [24] ,Request still in flight [24]" "No,Yes"
newline
bitfld.quad 0x00 23. " [23]           ,Request still in flight [23]" "No,Yes"
bitfld.quad 0x00 22. "  [22] ,Request still in flight [22]" "No,Yes"
bitfld.quad 0x00 21. "  [21] ,Request still in flight [21]" "No,Yes"
bitfld.quad 0x00 20. "  [20] ,Request still in flight [20]" "No,Yes"
newline
bitfld.quad 0x00 19. " [19]           ,Request still in flight [19]" "No,Yes"
bitfld.quad 0x00 18. "  [18] ,Request still in flight [18]" "No,Yes"
bitfld.quad 0x00 17. "  [17] ,Request still in flight [17]" "No,Yes"
bitfld.quad 0x00 16. "  [16] ,Request still in flight [16]" "No,Yes"
newline
bitfld.quad 0x00 15. " [15]           ,Request still in flight [15]" "No,Yes"
bitfld.quad 0x00 14. "  [14] ,Request still in flight [14]" "No,Yes"
bitfld.quad 0x00 13. "  [13] ,Request still in flight [13]" "No,Yes"
bitfld.quad 0x00 12. "  [12] ,Request still in flight [12]" "No,Yes"
newline
bitfld.quad 0x00 11. " [11]           ,Request still in flight [11]" "No,Yes"
bitfld.quad 0x00 10. "  [10] ,Request still in flight [10]" "No,Yes"
bitfld.quad 0x00 9. "  [9]  ,Request still in flight [9]" "No,Yes"
bitfld.quad 0x00 8. "  [8]  ,Request still in flight [8]" "No,Yes"
newline
bitfld.quad 0x00 7. " [7]            ,Request still in flight [7]" "No,Yes"
bitfld.quad 0x00 6. "  [6]  ,Request still in flight [6]" "No,Yes"
bitfld.quad 0x00 5. "  [5]  ,Request still in flight [5]" "No,Yes"
bitfld.quad 0x00 4. "  [4]  ,Request still in flight [4]" "No,Yes"
newline
bitfld.quad 0x00 3. " [3]            ,Request still in flight [3]" "No,Yes"
bitfld.quad 0x00 2. "  [2]  ,Request still in flight [2]" "No,Yes"
bitfld.quad 0x00 1. "  [1]  ,Request still in flight [1]" "No,Yes"
bitfld.quad 0x00 0. "  [0]  ,Request still in flight [0]" "No,Yes"
rgroup.quad 0x30158++0x07
line.quad 0x00 "CRT_STATUS_3,Coherency Request Trackers Current State"
bitfld.quad 0x00 63. " CRT_STATUS[63] ,Request still in flight [63]" "No,Yes"
bitfld.quad 0x00 62. "  [62] ,Request still in flight [62]" "No,Yes"
bitfld.quad 0x00 61. "  [61] ,Request still in flight [61]" "No,Yes"
bitfld.quad 0x00 60. "  [60] ,Request still in flight [60]" "No,Yes"
newline
bitfld.quad 0x00 59. " [59]           ,Request still in flight [59]" "No,Yes"
bitfld.quad 0x00 58. "  [58] ,Request still in flight [58]" "No,Yes"
bitfld.quad 0x00 57. "  [57] ,Request still in flight [57]" "No,Yes"
bitfld.quad 0x00 56. "  [56] ,Request still in flight [56]" "No,Yes"
newline
bitfld.quad 0x00 55. " [55]           ,Request still in flight [55]" "No,Yes"
bitfld.quad 0x00 54. "  [54] ,Request still in flight [54]" "No,Yes"
bitfld.quad 0x00 53. "  [53] ,Request still in flight [53]" "No,Yes"
bitfld.quad 0x00 52. "  [52] ,Request still in flight [52]" "No,Yes"
newline
bitfld.quad 0x00 51. " [51]           ,Request still in flight [51]" "No,Yes"
bitfld.quad 0x00 50. "  [50] ,Request still in flight [50]" "No,Yes"
bitfld.quad 0x00 49. "  [49] ,Request still in flight [49]" "No,Yes"
bitfld.quad 0x00 48. "  [48] ,Request still in flight [48]" "No,Yes"
newline
bitfld.quad 0x00 47. " [47]           ,Request still in flight [47]" "No,Yes"
bitfld.quad 0x00 46. "  [46] ,Request still in flight [46]" "No,Yes"
bitfld.quad 0x00 45. "  [45] ,Request still in flight [45]" "No,Yes"
bitfld.quad 0x00 44. "  [44] ,Request still in flight [44]" "No,Yes"
newline
bitfld.quad 0x00 43. " [43]           ,Request still in flight [43]" "No,Yes"
bitfld.quad 0x00 42. "  [42] ,Request still in flight [42]" "No,Yes"
bitfld.quad 0x00 41. "  [41] ,Request still in flight [41]" "No,Yes"
bitfld.quad 0x00 40. "  [40] ,Request still in flight [40]" "No,Yes"
newline
bitfld.quad 0x00 39. " [39]           ,Request still in flight [39]" "No,Yes"
bitfld.quad 0x00 38. "  [38] ,Request still in flight [38]" "No,Yes"
bitfld.quad 0x00 37. "  [37] ,Request still in flight [37]" "No,Yes"
bitfld.quad 0x00 36. "  [36] ,Request still in flight [36]" "No,Yes"
newline
bitfld.quad 0x00 35. " [35]           ,Request still in flight [35]" "No,Yes"
bitfld.quad 0x00 34. "  [34] ,Request still in flight [34]" "No,Yes"
bitfld.quad 0x00 33. "  [33] ,Request still in flight [33]" "No,Yes"
bitfld.quad 0x00 32. "  [32] ,Request still in flight [32]" "No,Yes"
newline
bitfld.quad 0x00 31. " [31]           ,Request still in flight [31]" "No,Yes"
bitfld.quad 0x00 30. "  [30] ,Request still in flight [30]" "No,Yes"
bitfld.quad 0x00 29. "  [29] ,Request still in flight [29]" "No,Yes"
bitfld.quad 0x00 28. "  [28] ,Request still in flight [28]" "No,Yes"
newline
bitfld.quad 0x00 27. " [27]           ,Request still in flight [27]" "No,Yes"
bitfld.quad 0x00 26. "  [26] ,Request still in flight [26]" "No,Yes"
bitfld.quad 0x00 25. "  [25] ,Request still in flight [25]" "No,Yes"
bitfld.quad 0x00 24. "  [24] ,Request still in flight [24]" "No,Yes"
newline
bitfld.quad 0x00 23. " [23]           ,Request still in flight [23]" "No,Yes"
bitfld.quad 0x00 22. "  [22] ,Request still in flight [22]" "No,Yes"
bitfld.quad 0x00 21. "  [21] ,Request still in flight [21]" "No,Yes"
bitfld.quad 0x00 20. "  [20] ,Request still in flight [20]" "No,Yes"
newline
bitfld.quad 0x00 19. " [19]           ,Request still in flight [19]" "No,Yes"
bitfld.quad 0x00 18. "  [18] ,Request still in flight [18]" "No,Yes"
bitfld.quad 0x00 17. "  [17] ,Request still in flight [17]" "No,Yes"
bitfld.quad 0x00 16. "  [16] ,Request still in flight [16]" "No,Yes"
newline
bitfld.quad 0x00 15. " [15]           ,Request still in flight [15]" "No,Yes"
bitfld.quad 0x00 14. "  [14] ,Request still in flight [14]" "No,Yes"
bitfld.quad 0x00 13. "  [13] ,Request still in flight [13]" "No,Yes"
bitfld.quad 0x00 12. "  [12] ,Request still in flight [12]" "No,Yes"
newline
bitfld.quad 0x00 11. " [11]           ,Request still in flight [11]" "No,Yes"
bitfld.quad 0x00 10. "  [10] ,Request still in flight [10]" "No,Yes"
bitfld.quad 0x00 9. "  [9]  ,Request still in flight [9]" "No,Yes"
bitfld.quad 0x00 8. "  [8]  ,Request still in flight [8]" "No,Yes"
newline
bitfld.quad 0x00 7. " [7]            ,Request still in flight [7]" "No,Yes"
bitfld.quad 0x00 6. "  [6]  ,Request still in flight [6]" "No,Yes"
bitfld.quad 0x00 5. "  [5]  ,Request still in flight [5]" "No,Yes"
bitfld.quad 0x00 4. "  [4]  ,Request still in flight [4]" "No,Yes"
newline
bitfld.quad 0x00 3. " [3]            ,Request still in flight [3]" "No,Yes"
bitfld.quad 0x00 2. "  [2]  ,Request still in flight [2]" "No,Yes"
bitfld.quad 0x00 1. "  [1]  ,Request still in flight [1]" "No,Yes"
bitfld.quad 0x00 0. "  [0]  ,Request still in flight [0]" "No,Yes"
rgroup.quad 0x30160++0x07
line.quad 0x00 "CRT_STATUS_4,Coherency Request Trackers Current State"
bitfld.quad 0x00 63. " CRT_STATUS[63] ,Request still in flight [63]" "No,Yes"
bitfld.quad 0x00 62. "  [62] ,Request still in flight [62]" "No,Yes"
bitfld.quad 0x00 61. "  [61] ,Request still in flight [61]" "No,Yes"
bitfld.quad 0x00 60. "  [60] ,Request still in flight [60]" "No,Yes"
newline
bitfld.quad 0x00 59. " [59]           ,Request still in flight [59]" "No,Yes"
bitfld.quad 0x00 58. "  [58] ,Request still in flight [58]" "No,Yes"
bitfld.quad 0x00 57. "  [57] ,Request still in flight [57]" "No,Yes"
bitfld.quad 0x00 56. "  [56] ,Request still in flight [56]" "No,Yes"
newline
bitfld.quad 0x00 55. " [55]           ,Request still in flight [55]" "No,Yes"
bitfld.quad 0x00 54. "  [54] ,Request still in flight [54]" "No,Yes"
bitfld.quad 0x00 53. "  [53] ,Request still in flight [53]" "No,Yes"
bitfld.quad 0x00 52. "  [52] ,Request still in flight [52]" "No,Yes"
newline
bitfld.quad 0x00 51. " [51]           ,Request still in flight [51]" "No,Yes"
bitfld.quad 0x00 50. "  [50] ,Request still in flight [50]" "No,Yes"
bitfld.quad 0x00 49. "  [49] ,Request still in flight [49]" "No,Yes"
bitfld.quad 0x00 48. "  [48] ,Request still in flight [48]" "No,Yes"
newline
bitfld.quad 0x00 47. " [47]           ,Request still in flight [47]" "No,Yes"
bitfld.quad 0x00 46. "  [46] ,Request still in flight [46]" "No,Yes"
bitfld.quad 0x00 45. "  [45] ,Request still in flight [45]" "No,Yes"
bitfld.quad 0x00 44. "  [44] ,Request still in flight [44]" "No,Yes"
newline
bitfld.quad 0x00 43. " [43]           ,Request still in flight [43]" "No,Yes"
bitfld.quad 0x00 42. "  [42] ,Request still in flight [42]" "No,Yes"
bitfld.quad 0x00 41. "  [41] ,Request still in flight [41]" "No,Yes"
bitfld.quad 0x00 40. "  [40] ,Request still in flight [40]" "No,Yes"
newline
bitfld.quad 0x00 39. " [39]           ,Request still in flight [39]" "No,Yes"
bitfld.quad 0x00 38. "  [38] ,Request still in flight [38]" "No,Yes"
bitfld.quad 0x00 37. "  [37] ,Request still in flight [37]" "No,Yes"
bitfld.quad 0x00 36. "  [36] ,Request still in flight [36]" "No,Yes"
newline
bitfld.quad 0x00 35. " [35]           ,Request still in flight [35]" "No,Yes"
bitfld.quad 0x00 34. "  [34] ,Request still in flight [34]" "No,Yes"
bitfld.quad 0x00 33. "  [33] ,Request still in flight [33]" "No,Yes"
bitfld.quad 0x00 32. "  [32] ,Request still in flight [32]" "No,Yes"
newline
bitfld.quad 0x00 31. " [31]           ,Request still in flight [31]" "No,Yes"
bitfld.quad 0x00 30. "  [30] ,Request still in flight [30]" "No,Yes"
bitfld.quad 0x00 29. "  [29] ,Request still in flight [29]" "No,Yes"
bitfld.quad 0x00 28. "  [28] ,Request still in flight [28]" "No,Yes"
newline
bitfld.quad 0x00 27. " [27]           ,Request still in flight [27]" "No,Yes"
bitfld.quad 0x00 26. "  [26] ,Request still in flight [26]" "No,Yes"
bitfld.quad 0x00 25. "  [25] ,Request still in flight [25]" "No,Yes"
bitfld.quad 0x00 24. "  [24] ,Request still in flight [24]" "No,Yes"
newline
bitfld.quad 0x00 23. " [23]           ,Request still in flight [23]" "No,Yes"
bitfld.quad 0x00 22. "  [22] ,Request still in flight [22]" "No,Yes"
bitfld.quad 0x00 21. "  [21] ,Request still in flight [21]" "No,Yes"
bitfld.quad 0x00 20. "  [20] ,Request still in flight [20]" "No,Yes"
newline
bitfld.quad 0x00 19. " [19]           ,Request still in flight [19]" "No,Yes"
bitfld.quad 0x00 18. "  [18] ,Request still in flight [18]" "No,Yes"
bitfld.quad 0x00 17. "  [17] ,Request still in flight [17]" "No,Yes"
bitfld.quad 0x00 16. "  [16] ,Request still in flight [16]" "No,Yes"
newline
bitfld.quad 0x00 15. " [15]           ,Request still in flight [15]" "No,Yes"
bitfld.quad 0x00 14. "  [14] ,Request still in flight [14]" "No,Yes"
bitfld.quad 0x00 13. "  [13] ,Request still in flight [13]" "No,Yes"
bitfld.quad 0x00 12. "  [12] ,Request still in flight [12]" "No,Yes"
newline
bitfld.quad 0x00 11. " [11]           ,Request still in flight [11]" "No,Yes"
bitfld.quad 0x00 10. "  [10] ,Request still in flight [10]" "No,Yes"
bitfld.quad 0x00 9. "  [9]  ,Request still in flight [9]" "No,Yes"
bitfld.quad 0x00 8. "  [8]  ,Request still in flight [8]" "No,Yes"
newline
bitfld.quad 0x00 7. " [7]            ,Request still in flight [7]" "No,Yes"
bitfld.quad 0x00 6. "  [6]  ,Request still in flight [6]" "No,Yes"
bitfld.quad 0x00 5. "  [5]  ,Request still in flight [5]" "No,Yes"
bitfld.quad 0x00 4. "  [4]  ,Request still in flight [4]" "No,Yes"
newline
bitfld.quad 0x00 3. " [3]            ,Request still in flight [3]" "No,Yes"
bitfld.quad 0x00 2. "  [2]  ,Request still in flight [2]" "No,Yes"
bitfld.quad 0x00 1. "  [1]  ,Request still in flight [1]" "No,Yes"
bitfld.quad 0x00 0. "  [0]  ,Request still in flight [0]" "No,Yes"
rgroup.quad 0x30168++0x07
line.quad 0x00 "CRT_STATUS_5,Coherency Request Trackers Current State"
bitfld.quad 0x00 63. " CRT_STATUS[63] ,Request still in flight [63]" "No,Yes"
bitfld.quad 0x00 62. "  [62] ,Request still in flight [62]" "No,Yes"
bitfld.quad 0x00 61. "  [61] ,Request still in flight [61]" "No,Yes"
bitfld.quad 0x00 60. "  [60] ,Request still in flight [60]" "No,Yes"
newline
bitfld.quad 0x00 59. " [59]           ,Request still in flight [59]" "No,Yes"
bitfld.quad 0x00 58. "  [58] ,Request still in flight [58]" "No,Yes"
bitfld.quad 0x00 57. "  [57] ,Request still in flight [57]" "No,Yes"
bitfld.quad 0x00 56. "  [56] ,Request still in flight [56]" "No,Yes"
newline
bitfld.quad 0x00 55. " [55]           ,Request still in flight [55]" "No,Yes"
bitfld.quad 0x00 54. "  [54] ,Request still in flight [54]" "No,Yes"
bitfld.quad 0x00 53. "  [53] ,Request still in flight [53]" "No,Yes"
bitfld.quad 0x00 52. "  [52] ,Request still in flight [52]" "No,Yes"
newline
bitfld.quad 0x00 51. " [51]           ,Request still in flight [51]" "No,Yes"
bitfld.quad 0x00 50. "  [50] ,Request still in flight [50]" "No,Yes"
bitfld.quad 0x00 49. "  [49] ,Request still in flight [49]" "No,Yes"
bitfld.quad 0x00 48. "  [48] ,Request still in flight [48]" "No,Yes"
newline
bitfld.quad 0x00 47. " [47]           ,Request still in flight [47]" "No,Yes"
bitfld.quad 0x00 46. "  [46] ,Request still in flight [46]" "No,Yes"
bitfld.quad 0x00 45. "  [45] ,Request still in flight [45]" "No,Yes"
bitfld.quad 0x00 44. "  [44] ,Request still in flight [44]" "No,Yes"
newline
bitfld.quad 0x00 43. " [43]           ,Request still in flight [43]" "No,Yes"
bitfld.quad 0x00 42. "  [42] ,Request still in flight [42]" "No,Yes"
bitfld.quad 0x00 41. "  [41] ,Request still in flight [41]" "No,Yes"
bitfld.quad 0x00 40. "  [40] ,Request still in flight [40]" "No,Yes"
newline
bitfld.quad 0x00 39. " [39]           ,Request still in flight [39]" "No,Yes"
bitfld.quad 0x00 38. "  [38] ,Request still in flight [38]" "No,Yes"
bitfld.quad 0x00 37. "  [37] ,Request still in flight [37]" "No,Yes"
bitfld.quad 0x00 36. "  [36] ,Request still in flight [36]" "No,Yes"
newline
bitfld.quad 0x00 35. " [35]           ,Request still in flight [35]" "No,Yes"
bitfld.quad 0x00 34. "  [34] ,Request still in flight [34]" "No,Yes"
bitfld.quad 0x00 33. "  [33] ,Request still in flight [33]" "No,Yes"
bitfld.quad 0x00 32. "  [32] ,Request still in flight [32]" "No,Yes"
newline
bitfld.quad 0x00 31. " [31]           ,Request still in flight [31]" "No,Yes"
bitfld.quad 0x00 30. "  [30] ,Request still in flight [30]" "No,Yes"
bitfld.quad 0x00 29. "  [29] ,Request still in flight [29]" "No,Yes"
bitfld.quad 0x00 28. "  [28] ,Request still in flight [28]" "No,Yes"
newline
bitfld.quad 0x00 27. " [27]           ,Request still in flight [27]" "No,Yes"
bitfld.quad 0x00 26. "  [26] ,Request still in flight [26]" "No,Yes"
bitfld.quad 0x00 25. "  [25] ,Request still in flight [25]" "No,Yes"
bitfld.quad 0x00 24. "  [24] ,Request still in flight [24]" "No,Yes"
newline
bitfld.quad 0x00 23. " [23]           ,Request still in flight [23]" "No,Yes"
bitfld.quad 0x00 22. "  [22] ,Request still in flight [22]" "No,Yes"
bitfld.quad 0x00 21. "  [21] ,Request still in flight [21]" "No,Yes"
bitfld.quad 0x00 20. "  [20] ,Request still in flight [20]" "No,Yes"
newline
bitfld.quad 0x00 19. " [19]           ,Request still in flight [19]" "No,Yes"
bitfld.quad 0x00 18. "  [18] ,Request still in flight [18]" "No,Yes"
bitfld.quad 0x00 17. "  [17] ,Request still in flight [17]" "No,Yes"
bitfld.quad 0x00 16. "  [16] ,Request still in flight [16]" "No,Yes"
newline
bitfld.quad 0x00 15. " [15]           ,Request still in flight [15]" "No,Yes"
bitfld.quad 0x00 14. "  [14] ,Request still in flight [14]" "No,Yes"
bitfld.quad 0x00 13. "  [13] ,Request still in flight [13]" "No,Yes"
bitfld.quad 0x00 12. "  [12] ,Request still in flight [12]" "No,Yes"
newline
bitfld.quad 0x00 11. " [11]           ,Request still in flight [11]" "No,Yes"
bitfld.quad 0x00 10. "  [10] ,Request still in flight [10]" "No,Yes"
bitfld.quad 0x00 9. "  [9]  ,Request still in flight [9]" "No,Yes"
bitfld.quad 0x00 8. "  [8]  ,Request still in flight [8]" "No,Yes"
newline
bitfld.quad 0x00 7. " [7]            ,Request still in flight [7]" "No,Yes"
bitfld.quad 0x00 6. "  [6]  ,Request still in flight [6]" "No,Yes"
bitfld.quad 0x00 5. "  [5]  ,Request still in flight [5]" "No,Yes"
bitfld.quad 0x00 4. "  [4]  ,Request still in flight [4]" "No,Yes"
newline
bitfld.quad 0x00 3. " [3]            ,Request still in flight [3]" "No,Yes"
bitfld.quad 0x00 2. "  [2]  ,Request still in flight [2]" "No,Yes"
bitfld.quad 0x00 1. "  [1]  ,Request still in flight [1]" "No,Yes"
bitfld.quad 0x00 0. "  [0]  ,Request still in flight [0]" "No,Yes"
rgroup.quad 0x30170++0x07
line.quad 0x00 "CRT_STATUS_6,Coherency Request Trackers Current State"
bitfld.quad 0x00 63. " CRT_STATUS[63] ,Request still in flight [63]" "No,Yes"
bitfld.quad 0x00 62. "  [62] ,Request still in flight [62]" "No,Yes"
bitfld.quad 0x00 61. "  [61] ,Request still in flight [61]" "No,Yes"
bitfld.quad 0x00 60. "  [60] ,Request still in flight [60]" "No,Yes"
newline
bitfld.quad 0x00 59. " [59]           ,Request still in flight [59]" "No,Yes"
bitfld.quad 0x00 58. "  [58] ,Request still in flight [58]" "No,Yes"
bitfld.quad 0x00 57. "  [57] ,Request still in flight [57]" "No,Yes"
bitfld.quad 0x00 56. "  [56] ,Request still in flight [56]" "No,Yes"
newline
bitfld.quad 0x00 55. " [55]           ,Request still in flight [55]" "No,Yes"
bitfld.quad 0x00 54. "  [54] ,Request still in flight [54]" "No,Yes"
bitfld.quad 0x00 53. "  [53] ,Request still in flight [53]" "No,Yes"
bitfld.quad 0x00 52. "  [52] ,Request still in flight [52]" "No,Yes"
newline
bitfld.quad 0x00 51. " [51]           ,Request still in flight [51]" "No,Yes"
bitfld.quad 0x00 50. "  [50] ,Request still in flight [50]" "No,Yes"
bitfld.quad 0x00 49. "  [49] ,Request still in flight [49]" "No,Yes"
bitfld.quad 0x00 48. "  [48] ,Request still in flight [48]" "No,Yes"
newline
bitfld.quad 0x00 47. " [47]           ,Request still in flight [47]" "No,Yes"
bitfld.quad 0x00 46. "  [46] ,Request still in flight [46]" "No,Yes"
bitfld.quad 0x00 45. "  [45] ,Request still in flight [45]" "No,Yes"
bitfld.quad 0x00 44. "  [44] ,Request still in flight [44]" "No,Yes"
newline
bitfld.quad 0x00 43. " [43]           ,Request still in flight [43]" "No,Yes"
bitfld.quad 0x00 42. "  [42] ,Request still in flight [42]" "No,Yes"
bitfld.quad 0x00 41. "  [41] ,Request still in flight [41]" "No,Yes"
bitfld.quad 0x00 40. "  [40] ,Request still in flight [40]" "No,Yes"
newline
bitfld.quad 0x00 39. " [39]           ,Request still in flight [39]" "No,Yes"
bitfld.quad 0x00 38. "  [38] ,Request still in flight [38]" "No,Yes"
bitfld.quad 0x00 37. "  [37] ,Request still in flight [37]" "No,Yes"
bitfld.quad 0x00 36. "  [36] ,Request still in flight [36]" "No,Yes"
newline
bitfld.quad 0x00 35. " [35]           ,Request still in flight [35]" "No,Yes"
bitfld.quad 0x00 34. "  [34] ,Request still in flight [34]" "No,Yes"
bitfld.quad 0x00 33. "  [33] ,Request still in flight [33]" "No,Yes"
bitfld.quad 0x00 32. "  [32] ,Request still in flight [32]" "No,Yes"
newline
bitfld.quad 0x00 31. " [31]           ,Request still in flight [31]" "No,Yes"
bitfld.quad 0x00 30. "  [30] ,Request still in flight [30]" "No,Yes"
bitfld.quad 0x00 29. "  [29] ,Request still in flight [29]" "No,Yes"
bitfld.quad 0x00 28. "  [28] ,Request still in flight [28]" "No,Yes"
newline
bitfld.quad 0x00 27. " [27]           ,Request still in flight [27]" "No,Yes"
bitfld.quad 0x00 26. "  [26] ,Request still in flight [26]" "No,Yes"
bitfld.quad 0x00 25. "  [25] ,Request still in flight [25]" "No,Yes"
bitfld.quad 0x00 24. "  [24] ,Request still in flight [24]" "No,Yes"
newline
bitfld.quad 0x00 23. " [23]           ,Request still in flight [23]" "No,Yes"
bitfld.quad 0x00 22. "  [22] ,Request still in flight [22]" "No,Yes"
bitfld.quad 0x00 21. "  [21] ,Request still in flight [21]" "No,Yes"
bitfld.quad 0x00 20. "  [20] ,Request still in flight [20]" "No,Yes"
newline
bitfld.quad 0x00 19. " [19]           ,Request still in flight [19]" "No,Yes"
bitfld.quad 0x00 18. "  [18] ,Request still in flight [18]" "No,Yes"
bitfld.quad 0x00 17. "  [17] ,Request still in flight [17]" "No,Yes"
bitfld.quad 0x00 16. "  [16] ,Request still in flight [16]" "No,Yes"
newline
bitfld.quad 0x00 15. " [15]           ,Request still in flight [15]" "No,Yes"
bitfld.quad 0x00 14. "  [14] ,Request still in flight [14]" "No,Yes"
bitfld.quad 0x00 13. "  [13] ,Request still in flight [13]" "No,Yes"
bitfld.quad 0x00 12. "  [12] ,Request still in flight [12]" "No,Yes"
newline
bitfld.quad 0x00 11. " [11]           ,Request still in flight [11]" "No,Yes"
bitfld.quad 0x00 10. "  [10] ,Request still in flight [10]" "No,Yes"
bitfld.quad 0x00 9. "  [9]  ,Request still in flight [9]" "No,Yes"
bitfld.quad 0x00 8. "  [8]  ,Request still in flight [8]" "No,Yes"
newline
bitfld.quad 0x00 7. " [7]            ,Request still in flight [7]" "No,Yes"
bitfld.quad 0x00 6. "  [6]  ,Request still in flight [6]" "No,Yes"
bitfld.quad 0x00 5. "  [5]  ,Request still in flight [5]" "No,Yes"
bitfld.quad 0x00 4. "  [4]  ,Request still in flight [4]" "No,Yes"
newline
bitfld.quad 0x00 3. " [3]            ,Request still in flight [3]" "No,Yes"
bitfld.quad 0x00 2. "  [2]  ,Request still in flight [2]" "No,Yes"
bitfld.quad 0x00 1. "  [1]  ,Request still in flight [1]" "No,Yes"
bitfld.quad 0x00 0. "  [0]  ,Request still in flight [0]" "No,Yes"
rgroup.quad 0x30178++0x07
line.quad 0x00 "CRT_STATUS_7,Coherency Request Trackers Current State"
bitfld.quad 0x00 63. " CRT_STATUS[63] ,Request still in flight [63]" "No,Yes"
bitfld.quad 0x00 62. "  [62] ,Request still in flight [62]" "No,Yes"
bitfld.quad 0x00 61. "  [61] ,Request still in flight [61]" "No,Yes"
bitfld.quad 0x00 60. "  [60] ,Request still in flight [60]" "No,Yes"
newline
bitfld.quad 0x00 59. " [59]           ,Request still in flight [59]" "No,Yes"
bitfld.quad 0x00 58. "  [58] ,Request still in flight [58]" "No,Yes"
bitfld.quad 0x00 57. "  [57] ,Request still in flight [57]" "No,Yes"
bitfld.quad 0x00 56. "  [56] ,Request still in flight [56]" "No,Yes"
newline
bitfld.quad 0x00 55. " [55]           ,Request still in flight [55]" "No,Yes"
bitfld.quad 0x00 54. "  [54] ,Request still in flight [54]" "No,Yes"
bitfld.quad 0x00 53. "  [53] ,Request still in flight [53]" "No,Yes"
bitfld.quad 0x00 52. "  [52] ,Request still in flight [52]" "No,Yes"
newline
bitfld.quad 0x00 51. " [51]           ,Request still in flight [51]" "No,Yes"
bitfld.quad 0x00 50. "  [50] ,Request still in flight [50]" "No,Yes"
bitfld.quad 0x00 49. "  [49] ,Request still in flight [49]" "No,Yes"
bitfld.quad 0x00 48. "  [48] ,Request still in flight [48]" "No,Yes"
newline
bitfld.quad 0x00 47. " [47]           ,Request still in flight [47]" "No,Yes"
bitfld.quad 0x00 46. "  [46] ,Request still in flight [46]" "No,Yes"
bitfld.quad 0x00 45. "  [45] ,Request still in flight [45]" "No,Yes"
bitfld.quad 0x00 44. "  [44] ,Request still in flight [44]" "No,Yes"
newline
bitfld.quad 0x00 43. " [43]           ,Request still in flight [43]" "No,Yes"
bitfld.quad 0x00 42. "  [42] ,Request still in flight [42]" "No,Yes"
bitfld.quad 0x00 41. "  [41] ,Request still in flight [41]" "No,Yes"
bitfld.quad 0x00 40. "  [40] ,Request still in flight [40]" "No,Yes"
newline
bitfld.quad 0x00 39. " [39]           ,Request still in flight [39]" "No,Yes"
bitfld.quad 0x00 38. "  [38] ,Request still in flight [38]" "No,Yes"
bitfld.quad 0x00 37. "  [37] ,Request still in flight [37]" "No,Yes"
bitfld.quad 0x00 36. "  [36] ,Request still in flight [36]" "No,Yes"
newline
bitfld.quad 0x00 35. " [35]           ,Request still in flight [35]" "No,Yes"
bitfld.quad 0x00 34. "  [34] ,Request still in flight [34]" "No,Yes"
bitfld.quad 0x00 33. "  [33] ,Request still in flight [33]" "No,Yes"
bitfld.quad 0x00 32. "  [32] ,Request still in flight [32]" "No,Yes"
newline
bitfld.quad 0x00 31. " [31]           ,Request still in flight [31]" "No,Yes"
bitfld.quad 0x00 30. "  [30] ,Request still in flight [30]" "No,Yes"
bitfld.quad 0x00 29. "  [29] ,Request still in flight [29]" "No,Yes"
bitfld.quad 0x00 28. "  [28] ,Request still in flight [28]" "No,Yes"
newline
bitfld.quad 0x00 27. " [27]           ,Request still in flight [27]" "No,Yes"
bitfld.quad 0x00 26. "  [26] ,Request still in flight [26]" "No,Yes"
bitfld.quad 0x00 25. "  [25] ,Request still in flight [25]" "No,Yes"
bitfld.quad 0x00 24. "  [24] ,Request still in flight [24]" "No,Yes"
newline
bitfld.quad 0x00 23. " [23]           ,Request still in flight [23]" "No,Yes"
bitfld.quad 0x00 22. "  [22] ,Request still in flight [22]" "No,Yes"
bitfld.quad 0x00 21. "  [21] ,Request still in flight [21]" "No,Yes"
bitfld.quad 0x00 20. "  [20] ,Request still in flight [20]" "No,Yes"
newline
bitfld.quad 0x00 19. " [19]           ,Request still in flight [19]" "No,Yes"
bitfld.quad 0x00 18. "  [18] ,Request still in flight [18]" "No,Yes"
bitfld.quad 0x00 17. "  [17] ,Request still in flight [17]" "No,Yes"
bitfld.quad 0x00 16. "  [16] ,Request still in flight [16]" "No,Yes"
newline
bitfld.quad 0x00 15. " [15]           ,Request still in flight [15]" "No,Yes"
bitfld.quad 0x00 14. "  [14] ,Request still in flight [14]" "No,Yes"
bitfld.quad 0x00 13. "  [13] ,Request still in flight [13]" "No,Yes"
bitfld.quad 0x00 12. "  [12] ,Request still in flight [12]" "No,Yes"
newline
bitfld.quad 0x00 11. " [11]           ,Request still in flight [11]" "No,Yes"
bitfld.quad 0x00 10. "  [10] ,Request still in flight [10]" "No,Yes"
bitfld.quad 0x00 9. "  [9]  ,Request still in flight [9]" "No,Yes"
bitfld.quad 0x00 8. "  [8]  ,Request still in flight [8]" "No,Yes"
newline
bitfld.quad 0x00 7. " [7]            ,Request still in flight [7]" "No,Yes"
bitfld.quad 0x00 6. "  [6]  ,Request still in flight [6]" "No,Yes"
bitfld.quad 0x00 5. "  [5]  ,Request still in flight [5]" "No,Yes"
bitfld.quad 0x00 4. "  [4]  ,Request still in flight [4]" "No,Yes"
newline
bitfld.quad 0x00 3. " [3]            ,Request still in flight [3]" "No,Yes"
bitfld.quad 0x00 2. "  [2]  ,Request still in flight [2]" "No,Yes"
bitfld.quad 0x00 1. "  [1]  ,Request still in flight [1]" "No,Yes"
bitfld.quad 0x00 0. "  [0]  ,Request still in flight [0]" "No,Yes"
newline
group.quad 0x30080++0x07
line.quad 0x00 "DIRECTORY_INV,Invalidate Entire Directory"
bitfld.quad 0x00 0. " VLD       ,Invalidation engine trigger" "No triggered,Triggered"
group.quad 0x30028++0x07
line.quad 0x00 "ECC_DISABLE,ECC Disable"
bitfld.quad 0x00 0. " DIS       ,ECC disable" "No,Yes"
group.quad 0x30180++0x07
line.quad 0x00 "ECC_INFO,ECC Errors and Saves Information"
hexmask.quad.word 0x00 32.--43. 1. " DIR_INDEX ,Index of first detected error"
hexmask.quad.word 0x00 16.--31. 1. "            ECC_COUNT ,Number of ECC errors found"
bitfld.quad 0x00 2. "         WAY ,Directory bank of first detected error" "0,1"
bitfld.quad 0x00 1. "                    DB  ,Double of multi-bit error" "No error,Error"
newline
bitfld.quad 0x00 0. " SB        ,Single-bit error" "No error,Error"
group.quad 0x30100++0x07
line.quad 0x00 "EVEN_COUNTER_MASK,Event Counter Mask"
bitfld.quad 0x00 13. " E13       ,Cache maintenance request being processed in LUP2" "0,1"
bitfld.quad 0x00 12. "               E12       ,Directory evict request being processed in LUP2" "0,1"
bitfld.quad 0x00 11. "            E11 ,Directory hit and may need snoops in LUP2" "0,1"
bitfld.quad 0x00 10. "                    E10 ,Request missed in directory in LUP2 cycle" "0,1"
newline
bitfld.quad 0x00 9. " E9        ,Request caused eviction in LUP2 cycle" "0,1"
bitfld.quad 0x00 8. "               E8        ,Request for copyback in LUP2 cycle" "0,1"
bitfld.quad 0x00 7. "            E7  ,Request for unique line in LUP2 cycle" "0,1"
bitfld.quad 0x00 6. "                    E6  ,Request for shared line in LUP2 cycle" "0,1"
newline
bitfld.quad 0x00 5. " E5        ,Able to insert evicted entry into directory in LUP2 cycle" "0,1"
bitfld.quad 0x00 4. "               E4        ,Locked CleanUnique gets OKAY in LUP2 cycle" "0,1"
bitfld.quad 0x00 3. "            E3  ,Locked CleanUnique gets EXOKAY in LUP2 cycle" "0,1"
bitfld.quad 0x00 2. "                    E2  ,Non-cancelled directory lookup in LUP2 cycle" "0,1"
newline
bitfld.quad 0x00 1. " E1        ,Cancelled directory lookup in LUP2 cycle" "0,1"
bitfld.quad 0x00 0. "               E0        ,Valid directory lookup in LUP2 cycle" "0,1"
group.quad 0x30108++0x07
line.quad 0x00 "EVENT_COUNTER_VALUE,Event Counter Value"
hexmask.quad.long 0x00 0.--31. 1. " VALUE     ,Event counter count value"
group.quad 0x30030++0x07
line.quad 0x00 "HASH_BYPASS,Hash Bypass"
bitfld.quad 0x00 0. " DIS       ,Hash ignore" "Not ignored,Ignored"
group.quad 0x30088++0x07
line.quad 0x00 "INDIRCT_ACCESS_TRIG,Indirect Access Trigger"
hexmask.quad.word 0x00 3.--14. 1. " INDEX     ,Index"
bitfld.quad 0x00 2. "            WAY       ,Way" "0,1"
bitfld.quad 0x00 0.--1. "            CMD ,Command" "Read-modify-write,Write data with ECC,Write raw data,Read raw data"
group.quad 0x30090++0x07
line.quad 0x00 "INDIRECT_RAM_COUNT_0,Indirect Access RAM Content"
group.quad 0x30098++0x07
line.quad 0x00 "INDIRECT_RAM_COUNT_1,Indirect Access RAM Content"
group.quad 0x300A0++0x07
line.quad 0x00 "INDIRECT_RAM_COUNT_2,Indirect Access RAM Content"
group.quad 0x30198++0x07
line.quad 0x00 "INTERRUPT_ERR,Interrupt Errors"
eventfld.quad 0x00 2. " E2        ,Event counter overflow interrupt status" "Not cleared,Cleared"
eventfld.quad 0x00 1. "     E1        ,Single-bit error interrupt status" "Not cleared,Cleared"
eventfld.quad 0x00 0. "  E0  ,Multi-bit error interrupt status" "Not cleared,Cleared"
group.quad 0x30190++0x07
line.quad 0x00 "INTERRUPT_ERR,Interrupt Errors"
bitfld.quad 0x00 2. " E2        ,Event counter overflow interrupt mask" "0,1"
bitfld.quad 0x00 1. "               E1        ,Single-bit error interrupt mask" "0,1"
bitfld.quad 0x00 0. "            E0  ,Multi-bit error interrupt mask" "0,1"
group.quad 0x30040++0x07
line.quad 0x00 "LLC_CONTROL,Last Level Cache Control"
bitfld.quad 0x00 1. " CM        ,Cache maintenance operations propagate from CCC" "Not propagated,Propagated"
bitfld.quad 0x00 0. "  WE        ,WriteEvict forward to LLC" "Not forward,Forward"
newline
rgroup.quad 0x30000++0x07
line.quad 0x00 "CCC_SPEC_FETCH_0,Cache Coherency Controller Speculative Fetch Behavior"
bitfld.quad 0x00 63. " SPEC_FETCH_VECTOR[63] ,Speculative fetch enable [63]" "Disabled,Enabled"
bitfld.quad 0x00 62. "  [62] ,Speculative fetch enable [62]" "Disabled,Enabled"
bitfld.quad 0x00 61. "  [61] ,Speculative fetch enable [61]" "Disabled,Enabled"
bitfld.quad 0x00 60. "  [60] ,Speculative fetch enable [60]" "Disabled,Enabled"
newline
bitfld.quad 0x00 59. " [59]                  ,Speculative fetch enable [59]" "Disabled,Enabled"
bitfld.quad 0x00 58. "  [58] ,Speculative fetch enable [58]" "Disabled,Enabled"
bitfld.quad 0x00 57. "  [57] ,Speculative fetch enable [57]" "Disabled,Enabled"
bitfld.quad 0x00 56. "  [56] ,Speculative fetch enable [56]" "Disabled,Enabled"
newline
bitfld.quad 0x00 55. " [55]                  ,Speculative fetch enable [55]" "Disabled,Enabled"
bitfld.quad 0x00 54. "  [54] ,Speculative fetch enable [54]" "Disabled,Enabled"
bitfld.quad 0x00 53. "  [53] ,Speculative fetch enable [53]" "Disabled,Enabled"
bitfld.quad 0x00 52. "  [52] ,Speculative fetch enable [52]" "Disabled,Enabled"
newline
bitfld.quad 0x00 51. " [51]                  ,Speculative fetch enable [51]" "Disabled,Enabled"
bitfld.quad 0x00 50. "  [50] ,Speculative fetch enable [50]" "Disabled,Enabled"
bitfld.quad 0x00 49. "  [49] ,Speculative fetch enable [49]" "Disabled,Enabled"
bitfld.quad 0x00 48. "  [48] ,Speculative fetch enable [48]" "Disabled,Enabled"
newline
bitfld.quad 0x00 47. " [47]                  ,Speculative fetch enable [47]" "Disabled,Enabled"
bitfld.quad 0x00 46. "  [46] ,Speculative fetch enable [46]" "Disabled,Enabled"
bitfld.quad 0x00 45. "  [45] ,Speculative fetch enable [45]" "Disabled,Enabled"
bitfld.quad 0x00 44. "  [44] ,Speculative fetch enable [44]" "Disabled,Enabled"
newline
bitfld.quad 0x00 43. " [43]                  ,Speculative fetch enable [43]" "Disabled,Enabled"
bitfld.quad 0x00 42. "  [42] ,Speculative fetch enable [42]" "Disabled,Enabled"
bitfld.quad 0x00 41. "  [41] ,Speculative fetch enable [41]" "Disabled,Enabled"
bitfld.quad 0x00 40. "  [40] ,Speculative fetch enable [40]" "Disabled,Enabled"
newline
bitfld.quad 0x00 39. " [39]                  ,Speculative fetch enable [39]" "Disabled,Enabled"
bitfld.quad 0x00 38. "  [38] ,Speculative fetch enable [38]" "Disabled,Enabled"
bitfld.quad 0x00 37. "  [37] ,Speculative fetch enable [37]" "Disabled,Enabled"
bitfld.quad 0x00 36. "  [36] ,Speculative fetch enable [36]" "Disabled,Enabled"
newline
bitfld.quad 0x00 35. " [35]                  ,Speculative fetch enable [35]" "Disabled,Enabled"
bitfld.quad 0x00 34. "  [34] ,Speculative fetch enable [34]" "Disabled,Enabled"
bitfld.quad 0x00 33. "  [33] ,Speculative fetch enable [33]" "Disabled,Enabled"
bitfld.quad 0x00 32. "  [32] ,Speculative fetch enable [32]" "Disabled,Enabled"
newline
bitfld.quad 0x00 31. " [31]                  ,Speculative fetch enable [31]" "Disabled,Enabled"
bitfld.quad 0x00 30. "  [30] ,Speculative fetch enable [30]" "Disabled,Enabled"
bitfld.quad 0x00 29. "  [29] ,Speculative fetch enable [29]" "Disabled,Enabled"
bitfld.quad 0x00 28. "  [28] ,Speculative fetch enable [28]" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. " [27]                  ,Speculative fetch enable [27]" "Disabled,Enabled"
bitfld.quad 0x00 26. "  [26] ,Speculative fetch enable [26]" "Disabled,Enabled"
bitfld.quad 0x00 25. "  [25] ,Speculative fetch enable [25]" "Disabled,Enabled"
bitfld.quad 0x00 24. "  [24] ,Speculative fetch enable [24]" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. " [23]                  ,Speculative fetch enable [23]" "Disabled,Enabled"
bitfld.quad 0x00 22. "  [22] ,Speculative fetch enable [22]" "Disabled,Enabled"
bitfld.quad 0x00 21. "  [21] ,Speculative fetch enable [21]" "Disabled,Enabled"
bitfld.quad 0x00 20. "  [20] ,Speculative fetch enable [20]" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. " [19]                  ,Speculative fetch enable [19]" "Disabled,Enabled"
bitfld.quad 0x00 18. "  [18] ,Speculative fetch enable [18]" "Disabled,Enabled"
bitfld.quad 0x00 17. "  [17] ,Speculative fetch enable [17]" "Disabled,Enabled"
bitfld.quad 0x00 16. "  [16] ,Speculative fetch enable [16]" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. " [15]                  ,Speculative fetch enable [15]" "Disabled,Enabled"
bitfld.quad 0x00 14. "  [14] ,Speculative fetch enable [14]" "Disabled,Enabled"
bitfld.quad 0x00 13. "  [13] ,Speculative fetch enable [13]" "Disabled,Enabled"
bitfld.quad 0x00 12. "  [12] ,Speculative fetch enable [12]" "Disabled,Enabled"
newline
bitfld.quad 0x00 11. " [11]                  ,Speculative fetch enable [11]" "Disabled,Enabled"
bitfld.quad 0x00 10. "  [10] ,Speculative fetch enable [10]" "Disabled,Enabled"
bitfld.quad 0x00 9. "  [9]  ,Speculative fetch enable [9]" "Disabled,Enabled"
bitfld.quad 0x00 8. "  [8]  ,Speculative fetch enable [8]" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. " [7]                   ,Speculative fetch enable [7]" "Disabled,Enabled"
bitfld.quad 0x00 6. "  [6]  ,Speculative fetch enable [6]" "Disabled,Enabled"
bitfld.quad 0x00 5. "  [5]  ,Speculative fetch enable [5]" "Disabled,Enabled"
bitfld.quad 0x00 4. "  [4]  ,Speculative fetch enable [4]" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. " [3]                   ,Speculative fetch enable [3]" "Disabled,Enabled"
bitfld.quad 0x00 2. "  [2]  ,Speculative fetch enable [2]" "Disabled,Enabled"
bitfld.quad 0x00 1. "  [1]  ,Speculative fetch enable [1]" "Disabled,Enabled"
bitfld.quad 0x00 0. "  [0]  ,Speculative fetch enable [0]" "Disabled,Enabled"
rgroup.quad 0x30008++0x07
line.quad 0x00 "CCC_SPEC_FETCH_1,Cache Coherency Controller Speculative Fetch Behavior"
bitfld.quad 0x00 63. " SPEC_FETCH_VECTOR[63] ,Speculative fetch enable [63]" "Disabled,Enabled"
bitfld.quad 0x00 62. "  [62] ,Speculative fetch enable [62]" "Disabled,Enabled"
bitfld.quad 0x00 61. "  [61] ,Speculative fetch enable [61]" "Disabled,Enabled"
bitfld.quad 0x00 60. "  [60] ,Speculative fetch enable [60]" "Disabled,Enabled"
newline
bitfld.quad 0x00 59. " [59]                  ,Speculative fetch enable [59]" "Disabled,Enabled"
bitfld.quad 0x00 58. "  [58] ,Speculative fetch enable [58]" "Disabled,Enabled"
bitfld.quad 0x00 57. "  [57] ,Speculative fetch enable [57]" "Disabled,Enabled"
bitfld.quad 0x00 56. "  [56] ,Speculative fetch enable [56]" "Disabled,Enabled"
newline
bitfld.quad 0x00 55. " [55]                  ,Speculative fetch enable [55]" "Disabled,Enabled"
bitfld.quad 0x00 54. "  [54] ,Speculative fetch enable [54]" "Disabled,Enabled"
bitfld.quad 0x00 53. "  [53] ,Speculative fetch enable [53]" "Disabled,Enabled"
bitfld.quad 0x00 52. "  [52] ,Speculative fetch enable [52]" "Disabled,Enabled"
newline
bitfld.quad 0x00 51. " [51]                  ,Speculative fetch enable [51]" "Disabled,Enabled"
bitfld.quad 0x00 50. "  [50] ,Speculative fetch enable [50]" "Disabled,Enabled"
bitfld.quad 0x00 49. "  [49] ,Speculative fetch enable [49]" "Disabled,Enabled"
bitfld.quad 0x00 48. "  [48] ,Speculative fetch enable [48]" "Disabled,Enabled"
newline
bitfld.quad 0x00 47. " [47]                  ,Speculative fetch enable [47]" "Disabled,Enabled"
bitfld.quad 0x00 46. "  [46] ,Speculative fetch enable [46]" "Disabled,Enabled"
bitfld.quad 0x00 45. "  [45] ,Speculative fetch enable [45]" "Disabled,Enabled"
bitfld.quad 0x00 44. "  [44] ,Speculative fetch enable [44]" "Disabled,Enabled"
newline
bitfld.quad 0x00 43. " [43]                  ,Speculative fetch enable [43]" "Disabled,Enabled"
bitfld.quad 0x00 42. "  [42] ,Speculative fetch enable [42]" "Disabled,Enabled"
bitfld.quad 0x00 41. "  [41] ,Speculative fetch enable [41]" "Disabled,Enabled"
bitfld.quad 0x00 40. "  [40] ,Speculative fetch enable [40]" "Disabled,Enabled"
newline
bitfld.quad 0x00 39. " [39]                  ,Speculative fetch enable [39]" "Disabled,Enabled"
bitfld.quad 0x00 38. "  [38] ,Speculative fetch enable [38]" "Disabled,Enabled"
bitfld.quad 0x00 37. "  [37] ,Speculative fetch enable [37]" "Disabled,Enabled"
bitfld.quad 0x00 36. "  [36] ,Speculative fetch enable [36]" "Disabled,Enabled"
newline
bitfld.quad 0x00 35. " [35]                  ,Speculative fetch enable [35]" "Disabled,Enabled"
bitfld.quad 0x00 34. "  [34] ,Speculative fetch enable [34]" "Disabled,Enabled"
bitfld.quad 0x00 33. "  [33] ,Speculative fetch enable [33]" "Disabled,Enabled"
bitfld.quad 0x00 32. "  [32] ,Speculative fetch enable [32]" "Disabled,Enabled"
newline
bitfld.quad 0x00 31. " [31]                  ,Speculative fetch enable [31]" "Disabled,Enabled"
bitfld.quad 0x00 30. "  [30] ,Speculative fetch enable [30]" "Disabled,Enabled"
bitfld.quad 0x00 29. "  [29] ,Speculative fetch enable [29]" "Disabled,Enabled"
bitfld.quad 0x00 28. "  [28] ,Speculative fetch enable [28]" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. " [27]                  ,Speculative fetch enable [27]" "Disabled,Enabled"
bitfld.quad 0x00 26. "  [26] ,Speculative fetch enable [26]" "Disabled,Enabled"
bitfld.quad 0x00 25. "  [25] ,Speculative fetch enable [25]" "Disabled,Enabled"
bitfld.quad 0x00 24. "  [24] ,Speculative fetch enable [24]" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. " [23]                  ,Speculative fetch enable [23]" "Disabled,Enabled"
bitfld.quad 0x00 22. "  [22] ,Speculative fetch enable [22]" "Disabled,Enabled"
bitfld.quad 0x00 21. "  [21] ,Speculative fetch enable [21]" "Disabled,Enabled"
bitfld.quad 0x00 20. "  [20] ,Speculative fetch enable [20]" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. " [19]                  ,Speculative fetch enable [19]" "Disabled,Enabled"
bitfld.quad 0x00 18. "  [18] ,Speculative fetch enable [18]" "Disabled,Enabled"
bitfld.quad 0x00 17. "  [17] ,Speculative fetch enable [17]" "Disabled,Enabled"
bitfld.quad 0x00 16. "  [16] ,Speculative fetch enable [16]" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. " [15]                  ,Speculative fetch enable [15]" "Disabled,Enabled"
bitfld.quad 0x00 14. "  [14] ,Speculative fetch enable [14]" "Disabled,Enabled"
bitfld.quad 0x00 13. "  [13] ,Speculative fetch enable [13]" "Disabled,Enabled"
bitfld.quad 0x00 12. "  [12] ,Speculative fetch enable [12]" "Disabled,Enabled"
newline
bitfld.quad 0x00 11. " [11]                  ,Speculative fetch enable [11]" "Disabled,Enabled"
bitfld.quad 0x00 10. "  [10] ,Speculative fetch enable [10]" "Disabled,Enabled"
bitfld.quad 0x00 9. "  [9]  ,Speculative fetch enable [9]" "Disabled,Enabled"
bitfld.quad 0x00 8. "  [8]  ,Speculative fetch enable [8]" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. " [7]                   ,Speculative fetch enable [7]" "Disabled,Enabled"
bitfld.quad 0x00 6. "  [6]  ,Speculative fetch enable [6]" "Disabled,Enabled"
bitfld.quad 0x00 5. "  [5]  ,Speculative fetch enable [5]" "Disabled,Enabled"
bitfld.quad 0x00 4. "  [4]  ,Speculative fetch enable [4]" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. " [3]                   ,Speculative fetch enable [3]" "Disabled,Enabled"
bitfld.quad 0x00 2. "  [2]  ,Speculative fetch enable [2]" "Disabled,Enabled"
bitfld.quad 0x00 1. "  [1]  ,Speculative fetch enable [1]" "Disabled,Enabled"
bitfld.quad 0x00 0. "  [0]  ,Speculative fetch enable [0]" "Disabled,Enabled"
rgroup.quad 0x30010++0x07
line.quad 0x00 "CCC_SPEC_FETCH_2,Cache Coherency Controller Speculative Fetch Behavior"
bitfld.quad 0x00 63. " SPEC_FETCH_VECTOR[63] ,Speculative fetch enable [63]" "Disabled,Enabled"
bitfld.quad 0x00 62. "  [62] ,Speculative fetch enable [62]" "Disabled,Enabled"
bitfld.quad 0x00 61. "  [61] ,Speculative fetch enable [61]" "Disabled,Enabled"
bitfld.quad 0x00 60. "  [60] ,Speculative fetch enable [60]" "Disabled,Enabled"
newline
bitfld.quad 0x00 59. " [59]                  ,Speculative fetch enable [59]" "Disabled,Enabled"
bitfld.quad 0x00 58. "  [58] ,Speculative fetch enable [58]" "Disabled,Enabled"
bitfld.quad 0x00 57. "  [57] ,Speculative fetch enable [57]" "Disabled,Enabled"
bitfld.quad 0x00 56. "  [56] ,Speculative fetch enable [56]" "Disabled,Enabled"
newline
bitfld.quad 0x00 55. " [55]                  ,Speculative fetch enable [55]" "Disabled,Enabled"
bitfld.quad 0x00 54. "  [54] ,Speculative fetch enable [54]" "Disabled,Enabled"
bitfld.quad 0x00 53. "  [53] ,Speculative fetch enable [53]" "Disabled,Enabled"
bitfld.quad 0x00 52. "  [52] ,Speculative fetch enable [52]" "Disabled,Enabled"
newline
bitfld.quad 0x00 51. " [51]                  ,Speculative fetch enable [51]" "Disabled,Enabled"
bitfld.quad 0x00 50. "  [50] ,Speculative fetch enable [50]" "Disabled,Enabled"
bitfld.quad 0x00 49. "  [49] ,Speculative fetch enable [49]" "Disabled,Enabled"
bitfld.quad 0x00 48. "  [48] ,Speculative fetch enable [48]" "Disabled,Enabled"
newline
bitfld.quad 0x00 47. " [47]                  ,Speculative fetch enable [47]" "Disabled,Enabled"
bitfld.quad 0x00 46. "  [46] ,Speculative fetch enable [46]" "Disabled,Enabled"
bitfld.quad 0x00 45. "  [45] ,Speculative fetch enable [45]" "Disabled,Enabled"
bitfld.quad 0x00 44. "  [44] ,Speculative fetch enable [44]" "Disabled,Enabled"
newline
bitfld.quad 0x00 43. " [43]                  ,Speculative fetch enable [43]" "Disabled,Enabled"
bitfld.quad 0x00 42. "  [42] ,Speculative fetch enable [42]" "Disabled,Enabled"
bitfld.quad 0x00 41. "  [41] ,Speculative fetch enable [41]" "Disabled,Enabled"
bitfld.quad 0x00 40. "  [40] ,Speculative fetch enable [40]" "Disabled,Enabled"
newline
bitfld.quad 0x00 39. " [39]                  ,Speculative fetch enable [39]" "Disabled,Enabled"
bitfld.quad 0x00 38. "  [38] ,Speculative fetch enable [38]" "Disabled,Enabled"
bitfld.quad 0x00 37. "  [37] ,Speculative fetch enable [37]" "Disabled,Enabled"
bitfld.quad 0x00 36. "  [36] ,Speculative fetch enable [36]" "Disabled,Enabled"
newline
bitfld.quad 0x00 35. " [35]                  ,Speculative fetch enable [35]" "Disabled,Enabled"
bitfld.quad 0x00 34. "  [34] ,Speculative fetch enable [34]" "Disabled,Enabled"
bitfld.quad 0x00 33. "  [33] ,Speculative fetch enable [33]" "Disabled,Enabled"
bitfld.quad 0x00 32. "  [32] ,Speculative fetch enable [32]" "Disabled,Enabled"
newline
bitfld.quad 0x00 31. " [31]                  ,Speculative fetch enable [31]" "Disabled,Enabled"
bitfld.quad 0x00 30. "  [30] ,Speculative fetch enable [30]" "Disabled,Enabled"
bitfld.quad 0x00 29. "  [29] ,Speculative fetch enable [29]" "Disabled,Enabled"
bitfld.quad 0x00 28. "  [28] ,Speculative fetch enable [28]" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. " [27]                  ,Speculative fetch enable [27]" "Disabled,Enabled"
bitfld.quad 0x00 26. "  [26] ,Speculative fetch enable [26]" "Disabled,Enabled"
bitfld.quad 0x00 25. "  [25] ,Speculative fetch enable [25]" "Disabled,Enabled"
bitfld.quad 0x00 24. "  [24] ,Speculative fetch enable [24]" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. " [23]                  ,Speculative fetch enable [23]" "Disabled,Enabled"
bitfld.quad 0x00 22. "  [22] ,Speculative fetch enable [22]" "Disabled,Enabled"
bitfld.quad 0x00 21. "  [21] ,Speculative fetch enable [21]" "Disabled,Enabled"
bitfld.quad 0x00 20. "  [20] ,Speculative fetch enable [20]" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. " [19]                  ,Speculative fetch enable [19]" "Disabled,Enabled"
bitfld.quad 0x00 18. "  [18] ,Speculative fetch enable [18]" "Disabled,Enabled"
bitfld.quad 0x00 17. "  [17] ,Speculative fetch enable [17]" "Disabled,Enabled"
bitfld.quad 0x00 16. "  [16] ,Speculative fetch enable [16]" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. " [15]                  ,Speculative fetch enable [15]" "Disabled,Enabled"
bitfld.quad 0x00 14. "  [14] ,Speculative fetch enable [14]" "Disabled,Enabled"
bitfld.quad 0x00 13. "  [13] ,Speculative fetch enable [13]" "Disabled,Enabled"
bitfld.quad 0x00 12. "  [12] ,Speculative fetch enable [12]" "Disabled,Enabled"
newline
bitfld.quad 0x00 11. " [11]                  ,Speculative fetch enable [11]" "Disabled,Enabled"
bitfld.quad 0x00 10. "  [10] ,Speculative fetch enable [10]" "Disabled,Enabled"
bitfld.quad 0x00 9. "  [9]  ,Speculative fetch enable [9]" "Disabled,Enabled"
bitfld.quad 0x00 8. "  [8]  ,Speculative fetch enable [8]" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. " [7]                   ,Speculative fetch enable [7]" "Disabled,Enabled"
bitfld.quad 0x00 6. "  [6]  ,Speculative fetch enable [6]" "Disabled,Enabled"
bitfld.quad 0x00 5. "  [5]  ,Speculative fetch enable [5]" "Disabled,Enabled"
bitfld.quad 0x00 4. "  [4]  ,Speculative fetch enable [4]" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. " [3]                   ,Speculative fetch enable [3]" "Disabled,Enabled"
bitfld.quad 0x00 2. "  [2]  ,Speculative fetch enable [2]" "Disabled,Enabled"
bitfld.quad 0x00 1. "  [1]  ,Speculative fetch enable [1]" "Disabled,Enabled"
bitfld.quad 0x00 0. "  [0]  ,Speculative fetch enable [0]" "Disabled,Enabled"
rgroup.quad 0x30018++0x07
line.quad 0x00 "CCC_SPEC_FETCH_3,Cache Coherency Controller Speculative Fetch Behavior"
bitfld.quad 0x00 63. " SPEC_FETCH_VECTOR[63] ,Speculative fetch enable [63]" "Disabled,Enabled"
bitfld.quad 0x00 62. "  [62] ,Speculative fetch enable [62]" "Disabled,Enabled"
bitfld.quad 0x00 61. "  [61] ,Speculative fetch enable [61]" "Disabled,Enabled"
bitfld.quad 0x00 60. "  [60] ,Speculative fetch enable [60]" "Disabled,Enabled"
newline
bitfld.quad 0x00 59. " [59]                  ,Speculative fetch enable [59]" "Disabled,Enabled"
bitfld.quad 0x00 58. "  [58] ,Speculative fetch enable [58]" "Disabled,Enabled"
bitfld.quad 0x00 57. "  [57] ,Speculative fetch enable [57]" "Disabled,Enabled"
bitfld.quad 0x00 56. "  [56] ,Speculative fetch enable [56]" "Disabled,Enabled"
newline
bitfld.quad 0x00 55. " [55]                  ,Speculative fetch enable [55]" "Disabled,Enabled"
bitfld.quad 0x00 54. "  [54] ,Speculative fetch enable [54]" "Disabled,Enabled"
bitfld.quad 0x00 53. "  [53] ,Speculative fetch enable [53]" "Disabled,Enabled"
bitfld.quad 0x00 52. "  [52] ,Speculative fetch enable [52]" "Disabled,Enabled"
newline
bitfld.quad 0x00 51. " [51]                  ,Speculative fetch enable [51]" "Disabled,Enabled"
bitfld.quad 0x00 50. "  [50] ,Speculative fetch enable [50]" "Disabled,Enabled"
bitfld.quad 0x00 49. "  [49] ,Speculative fetch enable [49]" "Disabled,Enabled"
bitfld.quad 0x00 48. "  [48] ,Speculative fetch enable [48]" "Disabled,Enabled"
newline
bitfld.quad 0x00 47. " [47]                  ,Speculative fetch enable [47]" "Disabled,Enabled"
bitfld.quad 0x00 46. "  [46] ,Speculative fetch enable [46]" "Disabled,Enabled"
bitfld.quad 0x00 45. "  [45] ,Speculative fetch enable [45]" "Disabled,Enabled"
bitfld.quad 0x00 44. "  [44] ,Speculative fetch enable [44]" "Disabled,Enabled"
newline
bitfld.quad 0x00 43. " [43]                  ,Speculative fetch enable [43]" "Disabled,Enabled"
bitfld.quad 0x00 42. "  [42] ,Speculative fetch enable [42]" "Disabled,Enabled"
bitfld.quad 0x00 41. "  [41] ,Speculative fetch enable [41]" "Disabled,Enabled"
bitfld.quad 0x00 40. "  [40] ,Speculative fetch enable [40]" "Disabled,Enabled"
newline
bitfld.quad 0x00 39. " [39]                  ,Speculative fetch enable [39]" "Disabled,Enabled"
bitfld.quad 0x00 38. "  [38] ,Speculative fetch enable [38]" "Disabled,Enabled"
bitfld.quad 0x00 37. "  [37] ,Speculative fetch enable [37]" "Disabled,Enabled"
bitfld.quad 0x00 36. "  [36] ,Speculative fetch enable [36]" "Disabled,Enabled"
newline
bitfld.quad 0x00 35. " [35]                  ,Speculative fetch enable [35]" "Disabled,Enabled"
bitfld.quad 0x00 34. "  [34] ,Speculative fetch enable [34]" "Disabled,Enabled"
bitfld.quad 0x00 33. "  [33] ,Speculative fetch enable [33]" "Disabled,Enabled"
bitfld.quad 0x00 32. "  [32] ,Speculative fetch enable [32]" "Disabled,Enabled"
newline
bitfld.quad 0x00 31. " [31]                  ,Speculative fetch enable [31]" "Disabled,Enabled"
bitfld.quad 0x00 30. "  [30] ,Speculative fetch enable [30]" "Disabled,Enabled"
bitfld.quad 0x00 29. "  [29] ,Speculative fetch enable [29]" "Disabled,Enabled"
bitfld.quad 0x00 28. "  [28] ,Speculative fetch enable [28]" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. " [27]                  ,Speculative fetch enable [27]" "Disabled,Enabled"
bitfld.quad 0x00 26. "  [26] ,Speculative fetch enable [26]" "Disabled,Enabled"
bitfld.quad 0x00 25. "  [25] ,Speculative fetch enable [25]" "Disabled,Enabled"
bitfld.quad 0x00 24. "  [24] ,Speculative fetch enable [24]" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. " [23]                  ,Speculative fetch enable [23]" "Disabled,Enabled"
bitfld.quad 0x00 22. "  [22] ,Speculative fetch enable [22]" "Disabled,Enabled"
bitfld.quad 0x00 21. "  [21] ,Speculative fetch enable [21]" "Disabled,Enabled"
bitfld.quad 0x00 20. "  [20] ,Speculative fetch enable [20]" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. " [19]                  ,Speculative fetch enable [19]" "Disabled,Enabled"
bitfld.quad 0x00 18. "  [18] ,Speculative fetch enable [18]" "Disabled,Enabled"
bitfld.quad 0x00 17. "  [17] ,Speculative fetch enable [17]" "Disabled,Enabled"
bitfld.quad 0x00 16. "  [16] ,Speculative fetch enable [16]" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. " [15]                  ,Speculative fetch enable [15]" "Disabled,Enabled"
bitfld.quad 0x00 14. "  [14] ,Speculative fetch enable [14]" "Disabled,Enabled"
bitfld.quad 0x00 13. "  [13] ,Speculative fetch enable [13]" "Disabled,Enabled"
bitfld.quad 0x00 12. "  [12] ,Speculative fetch enable [12]" "Disabled,Enabled"
newline
bitfld.quad 0x00 11. " [11]                  ,Speculative fetch enable [11]" "Disabled,Enabled"
bitfld.quad 0x00 10. "  [10] ,Speculative fetch enable [10]" "Disabled,Enabled"
bitfld.quad 0x00 9. "  [9]  ,Speculative fetch enable [9]" "Disabled,Enabled"
bitfld.quad 0x00 8. "  [8]  ,Speculative fetch enable [8]" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. " [7]                   ,Speculative fetch enable [7]" "Disabled,Enabled"
bitfld.quad 0x00 6. "  [6]  ,Speculative fetch enable [6]" "Disabled,Enabled"
bitfld.quad 0x00 5. "  [5]  ,Speculative fetch enable [5]" "Disabled,Enabled"
bitfld.quad 0x00 4. "  [4]  ,Speculative fetch enable [4]" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. " [3]                   ,Speculative fetch enable [3]" "Disabled,Enabled"
bitfld.quad 0x00 2. "  [2]  ,Speculative fetch enable [2]" "Disabled,Enabled"
bitfld.quad 0x00 1. "  [1]  ,Speculative fetch enable [1]" "Disabled,Enabled"
bitfld.quad 0x00 0. "  [0]  ,Speculative fetch enable [0]" "Disabled,Enabled"
tree.end
width 22.
tree "AGENT DVM0 DVM Registers"
rgroup.quad 0x34000++0x07
line.quad 0x00 "ACTIVE_VECTOR_0,Active Vector 0"
rgroup.quad 0x34048++0x07
line.quad 0x00 "AGENT_DISABLE_STATUS,Agent Disable Status"
bitfld.quad 0x00 0. " STAT ,Snoops complete" "Not completed,Completed"
group.quad 0x34020++0x07
line.quad 0x00 "FAULT_LOG_0,Fault Log 0"
rgroup.quad 0x34040++0x07
line.quad 0x00 "STS,Stat of the Internal Logic"
bitfld.quad 0x00 12. " A    ,Snoop arbiter not idle" "No,Yes"
bitfld.quad 0x00 11. "            O  ,Sync tracker returning sync response to originating agent" "No response,Response"
bitfld.quad 0x00 10. "  C  ,Sync tracker waiting for completions" "Not waiting,Waiting"
bitfld.quad 0x00 9. "  S  ,Sync tracker sending snoops" "Not sending,Sending"
newline
bitfld.quad 0x00 8. " D7   ,DRT entry 7 not empty" "No,Yes"
bitfld.quad 0x00 7. "            D6 ,DRT entry 6 not empty" "No,Yes"
bitfld.quad 0x00 6. "          D5 ,DRT entry 5 not empty" "No,Yes"
bitfld.quad 0x00 5. "          D4 ,DRT entry 4 not empty" "No,Yes"
newline
bitfld.quad 0x00 4. " D3   ,DRT entry 3 not empty" "No,Yes"
bitfld.quad 0x00 3. "            D2 ,DRT entry 2 not empty" "No,Yes"
bitfld.quad 0x00 2. "          D1 ,DRT entry 1 not empty" "No,Yes"
bitfld.quad 0x00 1. "          D0 ,DRT entry 0 not empty" "No,Yes"
newline
bitfld.quad 0x00 0. " F    ,Input FIFO not empty" "No,Yes"
tree.end
width 0x0B
tree.end
tree "SDRAML3INT (SDRAM L3 Interconnect)"
tree "DDR_T_MAIN_PROBE"
base ad:0xF8000000
width 18.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,Probe Core ID"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM              ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "          CORETYPEID    ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,Probe Revision ID"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID                 ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "          USERID        ,User defined value"
group.long 0x08++0x07
line.long 0x00 "MAINCTL,Probe MainCtl"
bitfld.long 0x00 7. " FILTBYTEALWAYSCHAINABLEEN ,Filter mapping selection" "All,Even"
rbitfld.long 0x00 6. "            INTRUSIVEMODE ,Intrusive flow-control mode" "Overflow,Intrusive"
bitfld.long 0x00 5. "  STATCONDDUMP ,The dump of a statistics frame to the range of counter values enable" "Disabled,Enabled"
bitfld.long 0x00 4. "  ALARMEN ,Collect alarm-related information enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " STATEN                    ,Statistics profiling enable" "Disabled,Enabled"
bitfld.long 0x00 2. "        PAYLOADEN     ,Traces to contain headers and payload enable" "Disabled,Enabled"
bitfld.long 0x00 1. "   TRACEEN      ,Send filtered packets on the ObsTx observation output enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  ERREN   ,Send on the ObsTx output any packet with Error status independently enable" "Disabled,Enabled"
line.long 0x04 "CFGCTL,Probe Configuration Control"
rbitfld.long 0x04 1. " ACTIVE                    ,Active" "Not active,Active"
bitfld.long 0x04 0. "      GLOBALEN      ,Global enable" "Disabled,Enabled"
group.long 0x14++0x07
line.long 0x00 "FILTERLUT,Probe Filter Look-Up Table"
hexmask.long.word 0x00 0.--15. 1. " FILTERLUT                 ,Look-up table"
line.long 0x04 "TRACEALARMEN,Probe Trace Alarm Enable"
bitfld.long 0x04 4. " TRACEALARMEN[4]           ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [4]" "0,1"
bitfld.long 0x04 3. "               [3]           ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [3]" "0,1"
bitfld.long 0x04 2. "          [2]          ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [2]" "0,1"
bitfld.long 0x04 1. "         [1]     ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [1]" "0,1"
newline
bitfld.long 0x04 0. " [0]                       ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [0]" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "TRACEALARMSTATUS,Probe Trace Alarm Status"
bitfld.long 0x00 4. " TRACEALARMSTATUS[4]       ,Indicates which lookup table or filter has been matched by a packet [4]" "0,1"
bitfld.long 0x00 3. "               [3]           ,Indicates which lookup table or filter has been matched by a packet [3]" "0,1"
bitfld.long 0x00 2. "          [2]          ,Indicates which lookup table or filter has been matched by a packet [2]" "0,1"
bitfld.long 0x00 1. "         [1]     ,Indicates which lookup table or filter has been matched by a packet [1]" "0,1"
newline
bitfld.long 0x00 0. " [0]                       ,Indicates which lookup table or filter has been matched by a packet [0]" "0,1"
wgroup.long 0x20++0x03
line.long 0x00 "TRACEALARMCLR,Probe Trace Alarm Clear"
bitfld.long 0x00 4. " TRACEALARMCLR[4]          ,Clear the corresponding bit in register TraceAlarmStatus [4]" "0,1"
bitfld.long 0x00 3. "               [3]           ,Clear the corresponding bit in register TraceAlarmStatus [3]" "0,1"
bitfld.long 0x00 2. "          [2]          ,Clear the corresponding bit in register TraceAlarmStatus [2]" "0,1"
bitfld.long 0x00 1. "         [1]     ,Clear the corresponding bit in register TraceAlarmStatus [1]" "0,1"
newline
bitfld.long 0x00 0. " [0]                       ,Clear the corresponding bit in register TraceAlarmStatus [0]" "0,1"
group.long 0x24++0x03
line.long 0x00 "STATPERIOD,Probe Statistics Period"
bitfld.long 0x00 0.--4. " STATPERIOD                ,Period during which statistics are collected before being dumped automatically" "Manual mode,2 cycles,4 cycles,8 cycles,16 cycles,32 cycles,64 cycles,128 cycles,256 cycles,512 cycles,1 kilocycles,2 kilocycles,4 kilocycles,8 kilocycles,16 kilocycles,32 kilocycles,64 kilocycles,128 kilocycles,256 kilocycles,512 kilocycles,1 megacycles,2 megacycles,4 megacycles,8 megacycles,16 megacycles,32 megacycles,64 megacycles,128 megacycles,256 megacycles,512 megacycles,1 gigacycles,2 gigacycles"
wgroup.long 0x28++0x03
line.long 0x00 "STATGO,Probe Statistics Collection"
bitfld.long 0x00 0. " STATGO                    ,Generate a statistics dump" "No effect,Generate"
group.long 0x2C++0x07
line.long 0x00 "STATALARMMIN,Probe Statistics Alarm Minimum"
line.long 0x04 "STATALARMMAX,Probe Statistics Alarm Maximum"
rgroup.long 0x34++0x03
line.long 0x00 "STATALARMSTATUS,Probe Statistics Alarm Status"
bitfld.long 0x00 0. " STATALARMSTATUS           ,At least one statistics counter has exceeded the programmed values for registers StatAlarmMin or StatAlarmMax" "Not exceeded,Exceeded"
wgroup.long 0x38++0x03
line.long 0x00 "STATALARMCLR,Probe Statistics Alarm Clear"
bitfld.long 0x00 0. " STATALARMCLR              ,StatAlarmStatus register bit clear" "No effect,Clear"
group.long 0x3C++0x03
line.long 0x00 "STATALARMEN,Probe Statistics Alarm Enable"
bitfld.long 0x00 0. " STATALARMEN               ,StatAlarm enable" "Disabled,Enabled"
newline
group.long 0x44++0x2B "FILTERS_0 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 0 Route ID Base"
hexmask.long.word 0x00 0.--13. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 0 Route ID Mask"
bitfld.long 0x04 13. " ROUTEIDMASK[13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "       [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
bitfld.long 0x04 10. "  [10] ,Mask bit for RouteIdBase[10]" "0,1"
newline
bitfld.long 0x04 9. " [9]             ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "       [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
bitfld.long 0x04 6. "  [6]  ,Mask bit for RouteIdBase[6]" "0,1"
newline
bitfld.long 0x04 5. " [5]             ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "       [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
bitfld.long 0x04 2. "  [2]  ,Mask bit for RouteIdBase[2]" "0,1"
newline
bitfld.long 0x04 1. " [1]             ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "       [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 0 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 0 Address Base High"
hexmask.long.byte 0x0C 0.--4. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 0 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 0 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 0 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 0 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 0 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 0 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 0 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long 0x80++0x2B "FILTERS_1 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 1 Route ID Base"
hexmask.long.word 0x00 0.--13. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 1 Route ID Mask"
bitfld.long 0x04 13. " ROUTEIDMASK[13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "       [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
bitfld.long 0x04 10. "  [10] ,Mask bit for RouteIdBase[10]" "0,1"
newline
bitfld.long 0x04 9. " [9]             ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "       [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
bitfld.long 0x04 6. "  [6]  ,Mask bit for RouteIdBase[6]" "0,1"
newline
bitfld.long 0x04 5. " [5]             ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "       [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
bitfld.long 0x04 2. "  [2]  ,Mask bit for RouteIdBase[2]" "0,1"
newline
bitfld.long 0x04 1. " [1]             ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "       [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 1 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 1 Address Base High"
hexmask.long.byte 0x0C 0.--4. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 1 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 1 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 1 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 1 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 1 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 1 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 1 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long 0xBC++0x2B "FILTERS_2 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 2 Route ID Base"
hexmask.long.word 0x00 0.--13. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 2 Route ID Mask"
bitfld.long 0x04 13. " ROUTEIDMASK[13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "       [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
bitfld.long 0x04 10. "  [10] ,Mask bit for RouteIdBase[10]" "0,1"
newline
bitfld.long 0x04 9. " [9]             ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "       [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
bitfld.long 0x04 6. "  [6]  ,Mask bit for RouteIdBase[6]" "0,1"
newline
bitfld.long 0x04 5. " [5]             ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "       [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
bitfld.long 0x04 2. "  [2]  ,Mask bit for RouteIdBase[2]" "0,1"
newline
bitfld.long 0x04 1. " [1]             ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "       [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 2 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 2 Address Base High"
hexmask.long.byte 0x0C 0.--4. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 2 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 2 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 2 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 2 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 2 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 2 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 2 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long 0xF8++0x2B "FILTERS_3 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 3 Route ID Base"
hexmask.long.word 0x00 0.--13. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 3 Route ID Mask"
bitfld.long 0x04 13. " ROUTEIDMASK[13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "       [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
bitfld.long 0x04 10. "  [10] ,Mask bit for RouteIdBase[10]" "0,1"
newline
bitfld.long 0x04 9. " [9]             ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "       [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
bitfld.long 0x04 6. "  [6]  ,Mask bit for RouteIdBase[6]" "0,1"
newline
bitfld.long 0x04 5. " [5]             ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "       [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
bitfld.long 0x04 2. "  [2]  ,Mask bit for RouteIdBase[2]" "0,1"
newline
bitfld.long 0x04 1. " [1]             ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "       [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 3 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 3 Address Base High"
hexmask.long.byte 0x0C 0.--4. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 3 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 3 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 3 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 3 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 3 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 3 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 3 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long (0x134+0x04)++0x07 "COUNTERS_0 Registers"
line.long 0x00 "SRC,Probe Counter 0 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 0 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_0_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x134+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 0 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_0_VAL       ,Statistics counter value"
group.long (0x148+0x04)++0x07 "COUNTERS_1 Registers"
line.long 0x00 "SRC,Probe Counter 1 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 1 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_1_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x148+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 1 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_1_VAL       ,Statistics counter value"
width 0x0B
tree.end
tree "DDR_SCHEDULER_DDR_T_MAIN_SCHEDULER"
base ad:0xF8000400
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,DDR Main Scheduler Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM    ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "                   CORETYPEID    ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,DDR Main Scheduler Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID       ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "                   USERID        ,User defined value"
group.long 0x08++0x0F
line.long 0x00 "DDRCONF,DDR Configuration Register"
bitfld.long 0x00 0.--4. " DDRCONF         ,Configuration of mapping of address bits" "DDR3/LPDDR3: R12_B3_C10,DDR3/LPDDR3: R13_B3_C9,DDR3/LPDDR3: R13_B3_C10,DDR3/LPDDR3: R14_B3_C9,DDR3/LPDDR3: R14_B3_C10,DDR3/LPDDR3: R15_B3_C10,DDR3/LPDDR3: R14_B3_C11,DDR3/LPDDR3: R15_B3_C11,DDR3/LPDDR3: R16_B3_C10,DDR3/LPDDR3: R16_B3_C11,DDR3/LPDDR3: R15_B3_C12,DDR4: R14_B3_C10,DDR4: R14_B4_C10,DDR4: R15_B3_C10,DDR4: R15_B4_C10,DDR4: R16_B3_C10,DDR4: R16_B4_C10,DDR4: R17_B3_C10,DDR4: R17_B4_C10,?..."
line.long 0x04 "DDRTIMING,DDR Timing Definition Register"
bitfld.long 0x04 31. " BWRATIO         ,DRAM clock cycles" "1,2"
bitfld.long 0x04 26.--30. "                        WRTORD        ,Minimum number of scheduler clock cycles between the last DRAM write/read command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x04 21.--25. "      RDTOWR    ,Minimum number of scheduler clock cycles between the last DRAM read/write command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x04 18.--20. "  BURSTLEN ,DRAM burst duration in scheduler clock cycles" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--17. " WRTOMISS        ,Minimum number of scheduler clock cycles between the last DRAM write/read command in another page" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x04 6.--11. "                       RDTOMISS      ,Minimum number of scheduler clock cycles between the last DRAM read/write command in another page" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x04 0.--5. "      ACTTOACT  ,Minimum number of scheduler clock cycles between two consecutive DRAM activate commands" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x08 "DDRMODE,DDR Mode Definition Register"
bitfld.long 0x08 1. " BWRATIOEXTENDED ,4x BWRATIO support" "Not supported,Supported"
bitfld.long 0x08 0. "            AUTOPRECHARGE ,Pages state after each access" "Opened,Closed"
line.long 0x0C "READLATENCY,DDR Main Scheduler Read Latency Register"
hexmask.long.byte 0x0C 0.--7. 1. " READLATENCY     ,Number of cycles from a scheduler request to a protocol controller response"
group.long 0x38++0x0B
line.long 0x00 "ACTIVATE,Timing Values Concerning Activate Commands Register"
bitfld.long 0x00 10. " FAWBANK         ,Number of Banks of a given device involved in the FAW period" "2-banks,4-banks"
bitfld.long 0x00 4.--9. "                  FAW           ,Number of cycles for the four bank activate period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--3. "      RRD       ,Number of cycles between two consecutive activate commands on different banks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "DEVTODEV,Device to Device Timing Values Register"
bitfld.long 0x04 4.--5. " BUSWRTORD       ,Number of cycles between the last write data to a device and the first read data of another device of a memory array with multiple ranks" "0,1,2,3"
bitfld.long 0x04 2.--3. "                        BUSRDTOWR     ,Number of cycles between the last read data of a device and the first write data to another device of a memory array with multiple ranks" "0,1,2,3"
bitfld.long 0x04 0.--1. "       BUSRDTORD ,Number of cycles between the last read data of a device and the first read data of another device of a memory array with multiple ranks" "0,1,2,3"
line.long 0x08 "DDR4TIMING,DDR4 Long Timing Register"
bitfld.long 0x08 8.--11. " RRDL            ,RRDL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 3.--7. "                       WRTORDL       ,WRTORDL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x08 0.--2. "      CCDL      ,CCDL" "0,1,2,3,4,5,6,7"
width 0x0B
tree.end
tree "IOHMC_CTRL_MMR_TOP_INST"
base ad:0xF8010000
width 17.
rgroup.long 0x28++0x07
line.long 0x00 "CTRLCFG0,Control Configuration 0 Register"
bitfld.long 0x00 24.--28. " CFG_DBC2_BURST_LENGTH            ,DBC2 burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "               CFG_DBC1_BURST_LENGTH            ,DBC1 burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 14.--18. "                    CFG_DBC0_BURST_LENGTH          ,DBC0 burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 9.--13. " CFG_CTRL_BURST_LENGTH            ,Control patch burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7.--8. "               CFG_AC_POS                       ,Lanes used as C/A pins" "0/1/2,1/2/3,0/1/2/3,?..."
bitfld.long 0x00 4.--6. "               CFG_DIMM_TYPE                  ,DIMM type select" "Component,UDIMM,RDIMM,LRDIMM,SODIMM,?..."
newline
bitfld.long 0x00 0.--3. " CFG_MEM_TYPE                     ,DRAM memory type" "DDR3,DDR4,LPDDR3,?..."
line.long 0x04 "CTRLCFG1,Control Configuration 1 Register"
bitfld.long 0x04 30. " CFG_DBC3_ENABLE_DM               ,DBC3 enable DRAM operation" "Disabled,Enabled"
bitfld.long 0x04 29. "         CFG_DBC2_ENABLE_DM               ,DBC2 enable DRAM operation" "Disabled,Enabled"
bitfld.long 0x04 28. "              CFG_DBC1_ENABLE_DM             ,DBC1 enable DRAM operation" "Disabled,Enabled"
newline
bitfld.long 0x04 27. " CFG_DBC0_ENABLE_DM               ,DBC0 enable DRAM operation" "Disabled,Enabled"
bitfld.long 0x04 26. "         CFG_CTRL_ENABLE_DM               ,Enable DRAM operation" "Disabled,Enabled"
bitfld.long 0x04 25. "              CFG_DQSTRK_EN                  ,DQS tracking enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19.--24. " CFG_STARVE_LIMIT                 ,Starvation limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x04 18. "               CFG_REORDER_READ                 ,Read command reorder enable" "Disabled,Enabled"
bitfld.long 0x04 17. "              CFG_DBC3_REORDER_RDATA         ,DBC3 read data reorder enable" "Disabled,Enabled"
newline
bitfld.long 0x04 16. " CFG_DBC2_REORDER_RDATA           ,DBC2 read data reorder enable" "Disabled,Enabled"
bitfld.long 0x04 15. "         CFG_DBC1_REORDER_RDATA           ,DBC1 read data reorder enable" "Disabled,Enabled"
bitfld.long 0x04 14. "              CFG_DBC0_REORDER_RDATA         ,DBC0 read data reorder enable" "Disabled,Enabled"
newline
bitfld.long 0x04 13. " CFG_CTRL_REORDER_RDATA           ,DBC0 read data reorder enable" "Disabled,Enabled"
bitfld.long 0x04 12. "         CFG_REORDER_DATA                 ,Column command reorder enable" "Disabled,Enabled"
bitfld.long 0x04 11. "              CFG_DBC3_ENABLE_ECC            ,DBC3 ECC enable" "Disabled,Enabled"
newline
bitfld.long 0x04 10. " CFG_DBC2_ENABLE_ECC              ,DBC2 ECC enable" "Disabled,Enabled"
bitfld.long 0x04 9. "         CFG_DBC1_ENABLE_ECC              ,DBC1 ECC enable" "Disabled,Enabled"
bitfld.long 0x04 8. "              CFG_DBC0_ENABLE_ECC            ,DBC0 ECC enable" "Disabled,Enabled"
newline
bitfld.long 0x04 7. " CFG_CTRL_ENABLE_ECC              ,CTRL ECC enable" "Disabled,Enabled"
bitfld.long 0x04 5.--6. "         CFG_ADDR_ORDER                   ,Address interleaving order" "Chip/row/bank/column,?..."
bitfld.long 0x04 0.--4. "  CFG_DBC3_BURST_LENGTH          ,DBC3 DRAM memory burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x50++0x03
line.long 0x00 "DRAMTIMING0,DRAM Timing 0 Register"
bitfld.long 0x00 13.--18. " CFG_MEM_CLK_DISABLE_ENTRY_CYCLES ,Clock disable delay cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 7.--12. "               CFG_POWER_SAVING_EXIT_CYCLES     ,Minimum low power state cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x00 0.--6. 1. "                    CFG_TCL                        ,CAS read latency"
rgroup.long 0x7C++0x13
line.long 0x00 "REG_CALTIMING0,Calibration Timing 0 Register"
bitfld.long 0x00 24.--29. " CFG_T_PARAM_ACT_TO_ACT_DIFF_BG   ,Active to activate timing on different bank groups (DDR4 only)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 18.--23. "               CFG_T_PARAM_ACT_TO_ACT_DIFF_BANK ,Active to activate timing on different banks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 12.--17. "                    CFG_T_PARAM_ACT_TO_ACT         ,Active to activate timing on same bank" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 6.--11. " CFG_T_PARAM_ACT_TO_PCH           ,Activate to precharge timing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--5. "               CFG_T_PARAM_ACT_TO_RDWR          ,Activate to read/write command timing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "REG_CALTIMING1,Calibration Timing 1 Register"
bitfld.long 0x04 24.--29. " CFG_T_PARAM_RD_TO_WR_DIFF_CHIP   ,Read to write command timing on different chips" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x04 18.--23. "               CFG_T_PARAM_ACT_RD_TO_WR         ,Write to read command timing on same bank" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x04 12.--17. "                    CFG_T_PARAM_RD_TO_RD_DIFF_BG   ,Read to read command timing on different bank groups" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x04 6.--11. " CFG_T_PARAM_RD_TO_RD_DIFF_CHIP   ,Read to read command timing on different chips" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x04 0.--5. "               CFG_T_PARAM_RD_TO_RD             ,Read to read command timing on same bank" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x08 "REG_CALTIMING2,Calibration Timing 2 Register"
bitfld.long 0x08 24.--29. " CFG_T_PARAM_WR_TO_WR_DIFF_CHIP   ,Write to write command timing on different chips" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x08 18.--23. "               CFG_T_PARAM_WR_TO_WR             ,Write to write command timing on same bank" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x08 12.--17. "                    CFG_T_PARAM_RD_AP_TO_VALID     ,Read command with autoprecharge to data valid timing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x08 6.--11. " CFG_T_PARAM_RD_TO_PCH            ,Read to precharge command timing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x08 0.--5. "               CFG_T_PARAM_RD_TO_WR_DIFF_BG     ,Read to write command timing on different bank groups" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x0C "REG_CALTIMING3,Calibration Timing 3 Register"
bitfld.long 0x0C 24.--29. " CFG_T_PARAM_WR_TO_PCH            ,Write to precharge command timing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x0C 18.--23. "               CFG_T_PARAM_WR_TO_RD_DIFF_BG     ,Write to read command timing on different bank groups (DDR4 only)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x0C 12.--17. "                    CFG_T_PARAM_WR_TO_RD_DIFF_CHIP ,Write to read command timing on different chips" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x0C 6.--11. " CFG_T_PARAM_WR_TO_RD             ,Write to read command timing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x0C 0.--5. "               CFG_T_PARAM_WR_TO_WR_DIFF_BG     ,Write to write command timing on different bank groups (DDR4 only)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x10 "REG_CALTIMING4,Calibration Timing 4 Register"
bitfld.long 0x10 26.--31. " CFG_T_PARAM_PDN_TO_VALID         ,Power down to valid bank command window" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.word 0x10 18.--25. 1. "               CFG_T_PARAM_ARF_TO_VALID         ,Auto refresh to valid DRAM command window"
bitfld.long 0x10 12.--17. "                  CFG_T_PARAM_PCH_ALL_TO_VALID   ,Precharge all to banks being ready for bank activation command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x10 6.--11. " CFG_T_PARAM_PCH_TO_VALID         ,Precharge to valid command timing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x10 0.--5. "               CFG_T_PARAM_WR_AP_TO_VALID       ,Write with auto precharge to valid command timing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0xA0++0x03
line.long 0x00 "REG_CALTIMING9,Calibration Timing 9 Register"
hexmask.long.byte 0x00 0.--7. 1. " CFG_T_PARAM_4_ACT_TO_ACT         ,Four activate window time"
rgroup.long 0xA8++0x03
line.long 0x00 "DRAMADDRW,DRAM Address Width Register"
hexmask.long.byte 0x00 16.--18. 0x01 " CFG_CS_ADDR_WIDTH                ,DRAM chip address bits"
hexmask.long.byte 0x00 14.--15. 0x40 "               CFG_BANK_GROUP_ADDR_WIDTH        ,DRAM bank group address bits"
hexmask.long.byte 0x00 10.--13. 0x04 "                    CFG_BANK_ADDR_WIDTH            ,DRAM bank address bits"
newline
hexmask.long.byte 0x00 5.--9. 0x20 " CFG_ROW_ADDR_WIDTH               ,DRAM row address bits"
hexmask.long.byte 0x00 0.--4. 0x01 "               CFG_COL_ADDR_WIDTH               ,DRAM column address bits"
group.long 0xAC++0x17
line.long 0x00 "SIDEBAND0,Sideband 0 Register"
bitfld.long 0x00 0. " MR_CMD_TRIGGER                   ,Mode register command execution trigger" "Not triggered,Triggered"
line.long 0x04 "SIDEBAND1,Sideband 1 Register"
bitfld.long 0x04 0.--3. " MMR_REFRESH_REQ                  ,Rank refresh request" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "SIDEBAND2,Sideband 2 Register"
bitfld.long 0x08 0. " MMR_ZQCAL_LONG_REQ               ,User long ZQ calibration request" "Not requested,Requested"
line.long 0x0C "SIDEBAND3,Sideband 3 Register"
bitfld.long 0x0C 0. " MMR_ZQCAL_SHORT_REQ              ,User short ZQ calibration request" "Not requested,Requested"
line.long 0x10 "SIDEBAND4,Sideband 4 Register"
bitfld.long 0x10 0.--3. " MMR_SELF_RFSH_REQ                ,User self refresh request" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x14 "SIDEBAND5,Sideband 5 Register"
bitfld.long 0x14 0. " MMR_DPD_MPS_REQ                  ,User deep power down/max power saving request" "Not requested,Requested"
rgroup.long 0xC4++0x17
line.long 0x00 "SIDEBAND6,Sideband 6 Register"
bitfld.long 0x00 0. " MR_CMD_ACK                       ,Mode register command in progress" "Not in progress,In progress"
line.long 0x04 "SIDEBAND7,Sideband 7 Register"
bitfld.long 0x04 0. " MMR_REFRESH_ACK                  ,Refresh in progress" "Not in progress,In progress"
line.long 0x08 "SIDEBAND8,Sideband 8 Register"
bitfld.long 0x08 0. " MMR_ZQCAL_ACK                    ,ZQ calibration in progress" "Not in progress,In progress"
line.long 0x0C "SIDEBAND9,Sideband 9 Register"
bitfld.long 0x0C 0. " MMR_SELF_RFSH_ACK                ,Self refresh request" "Not requested,Requested"
line.long 0x10 "SIDEBAND10,Sideband 10 Register"
bitfld.long 0x10 0. " MMR_DPD_MPS_ACK                  ,Deep power down/max power saving request" "Not requested,Requested"
line.long 0x14 "SIDEBAND11,Sideband 11 Register"
bitfld.long 0x14 0. " MMR_AUTO_PD_ACK                  ,Memory is in APD mode" "No,yes"
group.long 0xDC++0x0B
line.long 0x00 "SIDEBAND12,Sideband 12 Register"
bitfld.long 0x00 3.--6. " MR_CMD_RANK                      ,Mode register command rank" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "               MR_CMD_TYPE                      ,Mode register command type" "Mode register set,?..."
line.long 0x04 "SIDEBAND13,Sideband 13 Register"
line.long 0x08 "SIDEBAND14,Sideband 14 Register"
hexmask.long.word 0x08 0.--15. 1. " MMR_REFRESH_BANK                 ,DDR4 3DS chip id refresh"
rgroup.long 0xEC++0x03
line.long 0x00 "DRAMSTS,DRAM Status Register"
bitfld.long 0x00 1. " PHY_CAL_FAIL                     ,PHY calibration failed" "Not failed,Failed"
bitfld.long 0x00 0. "       PHY_CAL_SUCCESS                  ,PHY calibration succeed" "Not succeeded,Succeeded"
width 0x0B
tree.end
tree "HMC_ADP_CSR_OCP_SLV"
base ad:0xF8011000
width 26.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IDO Register"
hexmask.long.word 0x00 0.--15. 1. " SIREV              ,Silicon revision number"
group.long 0x08++0x03
line.long 0x00 "DDRIOCTRL,DDR IO Control Register"
bitfld.long 0x00 0.--1. " IO_SIZE            ,External configuration of DDR IO size" "x16,x32,x64,?..."
rgroup.long 0x0C++0x03
line.long 0x00 "DDRCALSTAT,DDR Calibration Status Register"
bitfld.long 0x00 1. " FAIL               ,DDR calibration failure status" "Not failed,Failed"
bitfld.long 0x00 0. "    CAL                       ,DDR calibration status" "Not succeeded,Succeeded"
group.long 0x60++0x03
line.long 0x00 "AUTO_PRECHARGE,Auto-precharge Register"
bitfld.long 0x00 0. " CTRL               ,Auto precharge enable" "Disabled,Enabled"
group.long 0x100++0x07
line.long 0x00 "ECCCTRL1,ECC Control 1 Register"
bitfld.long 0x00 16. " AUTOWB_CNT_RST     ,Reset autoWB internal counter" "No reset,Reset"
bitfld.long 0x00 8. "      CNT_RST                   ,Reset of internal counter" "No reset,Reset"
bitfld.long 0x00 0. "      ECC_EN              ,Enable ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "ECCTRL2,ECC Control 2 Register"
bitfld.long 0x04 16. " OVRW_RB_ECC_EN     ,Enable overwrite the read-back ECC code" "Disabled,Enabled"
bitfld.long 0x04 8. "      RMW_EN                    ,Enable read modify write logic" "Disabled,Enabled"
bitfld.long 0x04 0. "      AUTOWB_EN           ,Enable auto write back correction feature" "Disabled,Enabled"
group.long 0x110++0x1B
line.long 0x00 "ERRINTEN,Error Interrupt Enable Register"
bitfld.long 0x00 3. " SEQ2CORE_INTREN    ,SEQ2CORE interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "      HMI_INTREN                ,GP HMI interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "      DERRINTEN           ,Double bit error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "      SERRINTEN          ,Single bit error interrupt enable" "Disabled,Enabled"
line.long 0x04 "ERRINTENS,Error Interrupt Set Register"
bitfld.long 0x04 3. " SEQ2CORE_INTRS     ,SEQ2CORE interrupt set" "Not set,Set"
bitfld.long 0x04 2. "       HMI_INTRS                 ,GP HMI interrupt set" "Not set,Set"
bitfld.long 0x04 1. "       DERRINTS            ,Double bit error interrupt set" "Not set,Set"
bitfld.long 0x04 0. "       SERRINTS           ,Single bit error interrupt set" "Not set,Set"
line.long 0x08 "ERRINTENR,Error Interrupt Reset Register"
bitfld.long 0x08 3. " SEQ2CORE_INTRR     ,SEQ2CORE interrupt reset" "No reset,Reset"
bitfld.long 0x08 2. "      HMI_INTRR                 ,GP HMI interrupt reset" "No reset,Reset"
bitfld.long 0x08 1. "      DERRINTR            ,Double bit error interrupt reset" "No reset,Reset"
bitfld.long 0x08 0. "      SERRINTR           ,Single bit error interrupt reset" "No reset,Reset"
line.long 0x0C "INTMODE,Interrupt Mode Register"
bitfld.long 0x0C 24. " AFICAL_EN          ,Enable interrupt of AFI CAL success" "Disabled,Enabled"
bitfld.long 0x0C 16. "      INTONCMP                  ,Enable interrupt on compare match" "Disabled,Enabled"
bitfld.long 0x0C 8. "      EXT_ADDRPARITY_EN   ,Enable address parity for DDR4 memories" "Disabled,Enabled"
bitfld.long 0x0C 0. "      INTMODE            ,Interrupt mode for single-bit error enable" "Disabled,Enabled"
line.long 0x10 "INTSTAT,Interrupt Status Register"
bitfld.long 0x10 18. " DERRBUSFLG         ,Last transaction with double-bit error flag" "Not occurred,Occurred"
bitfld.long 0x10 17. "  ADDRPARFLG                ,External address parity flag for DDR4 memory" "Not occurred,Occurred"
bitfld.long 0x10 16. "  ADDRMTCFLG          ,Address mismatch error flag" "Not occurred,Occurred"
eventfld.long 0x10 3. "  SEQ2CORE_PENA      ,SEQ2CORE pending clear" "No effect,Cleared"
newline
eventfld.long 0x10 2. " HMI_PENA           ,HMI interrupt pending clear" "No effect,Cleared"
eventfld.long 0x10 1. "     DERRPENA                  ,Double-bit error pending clear" "No effect,Clear"
eventfld.long 0x10 0. "     SERRPENA            ,Single-bit error pending clear" "No effect,Clear"
line.long 0x14 "DIAGINTTEST,Enable Diagnostic Errors Register"
bitfld.long 0x14 24. " TADDRPAR           ,DDR4 address parity diagnostic enable" "Disabled,Enabled"
bitfld.long 0x14 16. "      TADDRMTC                  , Address mismatch error diagnostic enable" "Disabled,Enabled"
bitfld.long 0x14 8. "      TDERRA              ,Double-bit error diagnostic enable" "Disabled,Enabled"
bitfld.long 0x14 0. "      TSERRA             ,Single-bit error diagnostic enable" "Disabled,Enabled"
line.long 0x18 "MODSTAT,Counter Feature Status Flag Register"
bitfld.long 0x18 8. " AUTOWB_DROP_FLG    ,Auto write back counter match flag" "Not occurred,Occurred"
bitfld.long 0x18 0. "  CMPFLGA                   ,Counter match occurred flag" "Not occurred,Occurred"
rgroup.long 0x12C++0x07
line.long 0x00 "DERRADDRA,Double-bit Error Address Register"
line.long 0x04 "SERRADDRA,Single-bit Error Address Register"
rgroup.long 0x138++0x03
line.long 0x00 "AUTOWB_CORRADDR,Current AutoWB Address Correction Register"
group.long 0x13C++0x0B
line.long 0x00 "SERRCNTREG,Maximum Counter Value for Single-Bit Interrupt Register"
line.long 0x04 "AUTOWB_DROP_CNTREG,Maximum Counter Value for AutoWB Correction Interrupt Register"
line.long 0x08 "ECC_REG2WRECCDATABUS,ECC From Register Associated to Data Register"
hexmask.long.byte 0x08 24.--31. 1. " ECC3BUS            ,ECC from register associated to data [255:192] which will be written to the RAM"
hexmask.long.byte 0x08 16.--23. 1. "            ECC2BUS                   ,ECC from register associated to data [191:128] which will be written to the RAM"
hexmask.long.byte 0x08 8.--15. 1. "            ECC1BUS             ,ECC from register associated to data [127:64] which will be written to the RAM"
hexmask.long.byte 0x08 0.--7. 1. "            ECC0BUS            ,ECC from register associated to data [63:0] which will be written to the RAM"
rgroup.long 0x148++0x03
line.long 0x00 "ECC_RDECCDATA2REGBUS,ECC From RAM Written Register"
hexmask.long.byte 0x00 24.--31. 1. " ECC3BUS            ,ECC of data [255:192] which will be written to register"
hexmask.long.byte 0x00 16.--23. 1. "            ECC2BUS                   ,ECC of data [191:128] which will be written to register"
hexmask.long.byte 0x00 8.--15. 1. "            ECC1BUS             ,ECC of data [127:64] which will be written to register"
hexmask.long.byte 0x00 0.--7. 1. "            ECC0BUS            ,ECC of data [63:0] which will be written to register"
group.long 0x14C++0x0B
line.long 0x00 "ECC_REG2WRECCDATABUS,ECC From Register Associated to HMC ECC Register"
hexmask.long.byte 0x00 24.--31. 1. " ECC3BUS            ,ECC from register associated to data [255:192] which will be written to HMC ECC"
hexmask.long.byte 0x00 16.--23. 1. "            ECC2BUS                   ,ECC from register associated to data [191:128] which will be written to HMC ECC"
hexmask.long.byte 0x00 8.--15. 1. "            ECC1BUS             ,ECC from register associated to data [127:64] which will be written to HMC ECC"
hexmask.long.byte 0x00 0.--7. 1. "            ECC0BUS            ,ECC from register associated to data [63:0] which will be written to HMC ECC"
line.long 0x04 "ECC_DIAGON,Enable Diagnostic Access Register"
bitfld.long 0x04 14. " ECCDIAGON          ,ECC diagnostic mode enable" "Disabled,Enabled"
bitfld.long 0x04 1. "      RDDIAGON                  ,Read diagnostic MUX enable" "Disabled,Enabled"
bitfld.long 0x04 0. "      WRDIAGON            ,Write diagnostic MUX enable" "Disabled,Enabled"
line.long 0x08 "ECC_DECSTAT,Diagnostic Decoder Status"
bitfld.long 0x08 11. " DEC3DERRFLG        ,Decoder for data [255:192] has detected DBE" "No error,Error"
bitfld.long 0x08 10. "      DEC2DERRFLG               ,Decoder for data [191:128] has detected DBE" "No error,Error"
bitfld.long 0x08 9. "      DEC1DERRFLG         ,Decoder for data [127:64] has detected DBE" "No error,Error"
bitfld.long 0x08 8. "      DEC0DERRFLG        ,Decoder for data [63:0] has detected DBE" "No error,Error"
newline
bitfld.long 0x08 7. " DEC3ADDRFLG        ,Decoder for data [255:192] has detected address error" "No error,Error"
bitfld.long 0x08 6. "      DEC2ADDRFLG               ,Decoder for data [191:128] has detected address error" "No error,Error"
bitfld.long 0x08 5. "      DEC1ADDRFLG         ,Decoder for data [127:64] has detected address error" "No error,Error"
bitfld.long 0x08 4. "      DEC0ADDRFLG        ,Decoder for data [63:0] has detected address error" "No error,Error"
newline
bitfld.long 0x08 3. " DEC3SERRFLG        ,Decoder for data [255:192] has detected SBE" "No error,Error"
bitfld.long 0x08 2. "      DEC2SERRFLG               ,Decoder for data [191:128] has detected SBE" "No error,Error"
bitfld.long 0x08 1. "      DEC1SERRFLG         ,Decoder for data [127:64] has detected SBE" "No error,Error"
bitfld.long 0x08 0. "      DEC0SERRFLG        ,Decoder for data [63:0] has detected SBE" "No error,Error"
rgroup.long 0x160++0x03
line.long 0x00 "ECC_ERRGENADDR_0,Error Address Register 0"
rgroup.long 0x164++0x03
line.long 0x00 "ECC_ERRGENADDR_1,Error Address Register 1"
rgroup.long 0x168++0x03
line.long 0x00 "ECC_ERRGENADDR_2,Error Address Register 2"
rgroup.long 0x16C++0x03
line.long 0x00 "ECC_ERRGENADDR_3,Error Address Register 3"
group.long 0x170++0x03
line.long 0x00 "ECC_REG2RDDATABUS_BEAT0,ECC REG2RDDATABUS BEAT0"
hexmask.long.byte 0x00 24.--31. 1. " ECC3BUS            ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 16.--23. 1. "            ECC2BUS                   ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 8.--15. 1. "            ECC1BUS             ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 0.--7. 1. "            ECC0BUS            ,Data ECC from the register will be written to the RAM"
group.long 0x174++0x03
line.long 0x00 "ECC_REG2RDDATABUS_BEAT1,ECC REG2RDDATABUS BEAT1"
hexmask.long.byte 0x00 24.--31. 1. " ECC3BUS            ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 16.--23. 1. "            ECC2BUS                   ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 8.--15. 1. "            ECC1BUS             ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 0.--7. 1. "            ECC0BUS            ,Data ECC from the register will be written to the RAM"
group.long 0x178++0x03
line.long 0x00 "ECC_REG2RDDATABUS_BEAT2,ECC REG2RDDATABUS BEAT2"
hexmask.long.byte 0x00 24.--31. 1. " ECC3BUS            ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 16.--23. 1. "            ECC2BUS                   ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 8.--15. 1. "            ECC1BUS             ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 0.--7. 1. "            ECC0BUS            ,Data ECC from the register will be written to the RAM"
group.long 0x17C++0x03
line.long 0x00 "ECC_REG2RDDATABUS_BEAT3,ECC REG2RDDATABUS BEAT3"
hexmask.long.byte 0x00 24.--31. 1. " ECC3BUS            ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 16.--23. 1. "            ECC2BUS                   ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 8.--15. 1. "            ECC1BUS             ,Data ECC from the register will be written to the RAM"
hexmask.long.byte 0x00 0.--7. 1. "            ECC0BUS            ,Data ECC from the register will be written to the RAM"
rgroup.long 0x1B4++0x03
line.long 0x00 "SERRHADDR,Single-bit Error Address Register"
hexmask.long.byte 0x00 0.--4. 0x01 " SADDRESS           ,Recent SBE high address"
rgroup.long 0x1B0++0x03
line.long 0x00 "DERRHADDR,Double-bit Error Address Register"
hexmask.long.byte 0x00 0.--4. 0x01 " DADDRESS           ,Recent DBE high address"
rgroup.long 0x1BC++0x03
line.long 0x00 "AUTOWB_CORRHADDR,Current AutoWB Correction SBE High Address Register"
hexmask.long.byte 0x00 0.--4. 0x01 " SWBADDRESS         ,Recent autoWB correction high address"
rgroup.long 0x180++0x03
line.long 0x00 "ECC_ERRGENHADDR_0,Error Address Register 0"
hexmask.long.byte 0x00 0.--4. 0x01 " ADDR               ,High address generated with SER or address mismatch logic"
rgroup.long 0x184++0x03
line.long 0x00 "ECC_ERRGENHADDR_1,Error Address Register 1"
hexmask.long.byte 0x00 0.--4. 0x01 " ADDR               ,High address generated with SER or address mismatch logic"
rgroup.long 0x188++0x03
line.long 0x00 "ECC_ERRGENHADDR_2,Error Address Register 2"
hexmask.long.byte 0x00 0.--4. 0x01 " ADDR               ,High address generated with SER or address mismatch logic"
rgroup.long 0x18C++0x03
line.long 0x00 "ECC_ERRGENHADDR_3,Error Address Register 3"
hexmask.long.byte 0x00 0.--4. 0x01 " ADDR               ,High address generated with SER or address mismatch logic"
group.long 0x210++0x03
line.long 0x00 "HPSINTFCSEL,HPS Interface Enable Register"
bitfld.long 0x00 20. " TILEC_HMC          ,Tile C HMC connection path" "FPGA,HPS"
bitfld.long 0x00 19. "          TILEC_LANE3               ,Tile C LANE3 connection path" "FPGA,HPS"
bitfld.long 0x00 18. "          TILEC_LANE2         ,Tile C LANE2 connection path" "FPGA,HPS"
bitfld.long 0x00 17. "          TILEC_LANE1        ,Tile C LANE1 connection path" "FPGA,HPS"
newline
bitfld.long 0x00 16. " TILEC_LANE0        ,Tile C LANE0 connection path" "FPGA,HPS"
bitfld.long 0x00 12. "          TILEB_HMC                 ,Tile B HMC connection path" "FPGA,HPS"
bitfld.long 0x00 11. "          TILEB_LANE3         ,Tile B LANE3 connection path" "FPGA,HPS"
bitfld.long 0x00 10. "          TILEB_LANE2        ,Tile B LANE2 connection path" "FPGA,HPS"
newline
bitfld.long 0x00 9. " TILEB_LANE1        ,Tile B LANE1 connection path" "FPGA,HPS"
bitfld.long 0x00 8. "          TILEB_LANE0               ,Tile B LANE0 connection path" "FPGA,HPS"
bitfld.long 0x00 4. "          TILEA_HMC           ,Tile A HMC connection path" "FPGA,HPS"
bitfld.long 0x00 3. "          TILEA_LANE3        ,Tile A LANE3 connection path" "FPGA,HPS"
newline
bitfld.long 0x00 2. " TILEA_LANE2        ,Tile A LANE2 connection path" "FPGA,HPS"
bitfld.long 0x00 1. "          TILEA_LANE1               ,Tile A LANE1 connection path" "FPGA,HPS"
bitfld.long 0x00 0. "          TILEA_LANE0         ,Tile A LANE0 connection path" "FPGA,HPS"
rgroup.long 0x218++0x03
line.long 0x00 "RSTHANDSHAKESTAT,Reset Handshaking From IO48 or NIOS Register"
hexmask.long.byte 0x00 0.--7. 1. " SEQ2CORE           ,SEQ2CORE"
group.long 0x214++0x03
line.long 0x00 "RSTHANDSHAKECTRL,Reset Handshaking From MPFE or ARM Register"
hexmask.long.byte 0x00 0.--7. 1. " CORE2SEQ           ,CORE2SEQ"
group.long 0xE0++0x03
line.long 0x00 "DRAMADDRWIDTH,DRAM Address Bit Width Register"
hexmask.long.byte 0x00 16.--18. 0x01 " CFG_CS_ADDR_WIDTH  ,Chip address bits"
hexmask.long.byte 0x00 14.--15. 0x40 "            CFG_BANK_GROUP_ADDR_WIDTH ,DRAM bank group address bits"
hexmask.long.byte 0x00 10.--13. 0x04 "            CFG_BANK_ADDR_WIDTH ,DRAM bank address bits"
hexmask.long.byte 0x00 5.--9. 0x20 "            CFG_ROW_ADDR_WIDTH ,DRAM row address bits"
newline
hexmask.long.byte 0x00 0.--4. 0x01 " CFG_COL_ADDR_WIDTH ,DRAM column address bits"
width 0x0B
tree.end
tree "FIREWALL_DDR_SCHEDULER_MPFE_SCR"
base ad:0xF8020000
width 24.
group.long 0x00++0x07
line.long 0x00 "HMC_REGISTER,HMC Register"
bitfld.long 0x00 16. " AXI_AP ,Allowed transactions from AXI_AP to HMC_REGISTER" "Only secure,Both"
bitfld.long 0x00 8. "  FPGA2SOC ,Allowed transactions from FPGA2SOC to HMC_REGISTER" "Only secure,Both"
bitfld.long 0x00 0. "  MPU ,Allowed transactions from MPU to HMC_REGISTER" "Only secure,Both"
line.long 0x04 "HMC_ADAPTOR_REGISTER,HMC ADAPTOR Register"
bitfld.long 0x04 16. " AXI_AP ,Allowed transactions from AXI_AP to HMC_ADAPTOR_REGISTER" "Only secure,Both"
bitfld.long 0x04 8. "  FPGA2SOC ,Allowed transactions from FPGA2SOC to HMC_ADAPTOR_REGISTER" "Only secure,Both"
bitfld.long 0x04 0. "  MPU ,Allowed transactions from MPU to HMC_ADAPTOR_REGISTER" "Only secure,Both"
group.long 0x18++0x03
line.long 0x00 "FPGA2SDRAM_SIDEBANDMGR,FPGA2SDRAM SIDEBANDMGR"
bitfld.long 0x00 16. " AXI_AP ,Allowed transactions from AXI_AP to FPGA2SDRAM_SIDEBANDMGR" "Only secure,Both"
bitfld.long 0x00 8. "  FPGA2SOC ,Allowed transactions from FPGA2SOC to FPGA2SDRAM_SIDEBANDMGR" "Only secure,Both"
bitfld.long 0x00 0. "  MPU ,Allowed transactions from MPU to FPGA2SDRAM_SIDEBANDMGR" "Only secure,Both"
group.long 0x14++0x03
line.long 0x00 "NOC_PROBES,NOC PROBES"
bitfld.long 0x00 16. " AXI_AP ,Allowed transactions from AXI_AP to NOC_PROBES" "Only secure,Both"
bitfld.long 0x00 8. "  FPGA2SOC ,Allowed transactions from FPGA2SOC to NOC_PROBES" "Only secure,Both"
bitfld.long 0x00 0. "  MPU ,Allowed transactions from MPU to NOC_PROBES" "Only secure,Both"
group.long 0x08++0x03
line.long 0x00 "NOC_SCHEDULER_CSR,NOC SCHEDULER CSR"
bitfld.long 0x00 16. " AXI_AP ,Allowed transactions from AXI_AP to NOC_SCHEDULER_CSR" "Only secure,Both"
bitfld.long 0x00 8. "  FPGA2SOC ,Allowed transactions from FPGA2SOC to NOC_SCHEDULER_CSR" "Only secure,Both"
bitfld.long 0x00 0. "  MPU ,Allowed transactions from MPU to NOC_SCHEDULER_CSR" "Only secure,Both"
group.long 0x10++0x03
line.long 0x00 "NOC_QOS,NOC QOS"
bitfld.long 0x00 16. " AXI_AP ,Allowed transactions from AXI_AP to NOC_QOS" "Only secure,Both"
bitfld.long 0x00 8. "  FPGA2SOC ,Allowed transactions from FPGA2SOC to NOC_QOS" "Only secure,Both"
bitfld.long 0x00 0. "  MPU ,Allowed transactions from MPU to NOC_QOS" "Only secure,Both"
width 0x0B
tree.end
tree "FIREWALL_MPU_DDR_SCR"
base ad:0xF8020100
width 29.
group.long 0x00++0x03
line.long 0x00 "ENABLE_SET/CLR,Enable Register"
setclrfld.long 0x00 14. 0x04 14. 0x08 14. " NONMPUREGION6ENABLE ,Non MPU region 6 enable" "Disabled,Enabled"
setclrfld.long 0x00 13. 0x04 13. 0x08 13. "   NONMPUREGION5ENABLE ,Non MPU region 5 enable" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x04 12. 0x08 12. "   NONMPUREGION4ENABLE ,Non MPU region 4 enable" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x04 11. 0x08 11. "   NONMPUREGION3ENABLE ,Non MPU region 3 enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 10. 0x04 10. 0x08 10. " NONMPUREGION2ENABLE ,Non MPU region 2 enable" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x04 9. 0x08 9. "   NONMPUREGION1ENABLE ,Non MPU region 1 enable" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x04 8. 0x08 8. "   NONMPUREGION0ENABLE ,Non MPU region 0 enable" "Disabled,Enabled"
setclrfld.long 0x00 7. 0x04 7. 0x08 7. "   MPUREGION7ENABLE    ,MPU region 7 enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 6. 0x04 6. 0x08 6. " MPUREGION6ENABLE    ,MPU region 6 enable" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x04 5. 0x08 5. "   MPUREGION5ENABLE    ,MPU region 5 enable" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x04 4. 0x08 4. "   MPUREGION4ENABLE    ,MPU region 4 enable" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. "   MPUREGION3ENABLE    ,MPU region 3 enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 2. 0x04 2. 0x08 2. " MPUREGION2ENABLE    ,MPU region 2 enable" "Disabled,Enabled"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "   MPUREGION1ENABLE    ,MPU region 1 enable" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "   MPUREGION0ENABLE    ,MPU region 0 enable" "Disabled,Enabled"
group.long 0x10++0x0F
line.long 0x00 "MPUREGION0ADDR_BASE,MPU Region 0 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "MPUREGION0ADDR_BASEEXT,MPU Region 0 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "MPUREGION0ADDR_LIMIT,MPU Region 0 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "MPUREGION0ADDR_LIMITEXT,MPU Region 0 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x20++0x0F
line.long 0x00 "MPUREGION1ADDR_BASE,MPU Region 1 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "MPUREGION1ADDR_BASEEXT,MPU Region 1 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "MPUREGION1ADDR_LIMIT,MPU Region 1 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "MPUREGION1ADDR_LIMITEXT,MPU Region 1 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x30++0x0F
line.long 0x00 "MPUREGION2ADDR_BASE,MPU Region 2 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "MPUREGION2ADDR_BASEEXT,MPU Region 2 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "MPUREGION2ADDR_LIMIT,MPU Region 2 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "MPUREGION2ADDR_LIMITEXT,MPU Region 2 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x40++0x0F
line.long 0x00 "MPUREGION3ADDR_BASE,MPU Region 3 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "MPUREGION3ADDR_BASEEXT,MPU Region 3 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "MPUREGION3ADDR_LIMIT,MPU Region 3 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "MPUREGION3ADDR_LIMITEXT,MPU Region 3 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x50++0x0F
line.long 0x00 "MPUREGION4ADDR_BASE,MPU Region 4 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "MPUREGION4ADDR_BASEEXT,MPU Region 4 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "MPUREGION4ADDR_LIMIT,MPU Region 4 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "MPUREGION4ADDR_LIMITEXT,MPU Region 4 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x60++0x0F
line.long 0x00 "MPUREGION5ADDR_BASE,MPU Region 5 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "MPUREGION5ADDR_BASEEXT,MPU Region 5 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "MPUREGION5ADDR_LIMIT,MPU Region 5 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "MPUREGION5ADDR_LIMITEXT,MPU Region 5 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x70++0x0F
line.long 0x00 "MPUREGION6ADDR_BASE,MPU Region 6 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "MPUREGION6ADDR_BASEEXT,MPU Region 6 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "MPUREGION6ADDR_LIMIT,MPU Region 6 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "MPUREGION6ADDR_LIMITEXT,MPU Region 6 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x80++0x0F
line.long 0x00 "MPUREGION7ADDR_BASE,MPU Region 7 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "MPUREGION7ADDR_BASEEXT,MPU Region 7 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "MPUREGION7ADDR_LIMIT,MPU Region 7 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "MPUREGION7ADDR_LIMITEXT,MPU Region 7 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x90++0x0F
line.long 0x00 "NONMPUREGION0ADDR_BASE,Non MPU Region 0 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "NONMPUREGION0ADDR_BASEEXT,Non MPU Region 0 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "NONMPUREGION0ADDR_LIMIT,Non MPU Region 0 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "NONMPUREGION0ADDR_LIMITEXT,Non MPU Region 0 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0xA0++0x0F
line.long 0x00 "NONMPUREGION1ADDR_BASE,Non MPU Region 1 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "NONMPUREGION1ADDR_BASEEXT,Non MPU Region 1 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "NONMPUREGION1ADDR_LIMIT,Non MPU Region 1 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "NONMPUREGION1ADDR_LIMITEXT,Non MPU Region 1 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0xB0++0x0F
line.long 0x00 "NONMPUREGION2ADDR_BASE,Non MPU Region 2 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "NONMPUREGION2ADDR_BASEEXT,Non MPU Region 2 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "NONMPUREGION2ADDR_LIMIT,Non MPU Region 2 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "NONMPUREGION2ADDR_LIMITEXT,Non MPU Region 2 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0xC0++0x0F
line.long 0x00 "NONMPUREGION3ADDR_BASE,Non MPU Region 3 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "NONMPUREGION3ADDR_BASEEXT,Non MPU Region 3 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "NONMPUREGION3ADDR_LIMIT,Non MPU Region 3 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "NONMPUREGION3ADDR_LIMITEXT,Non MPU Region 3 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0xD0++0x0F
line.long 0x00 "NONMPUREGION4ADDR_BASE,Non MPU Region 4 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "NONMPUREGION4ADDR_BASEEXT,Non MPU Region 4 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "NONMPUREGION4ADDR_LIMIT,Non MPU Region 4 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "NONMPUREGION4ADDR_LIMITEXT,Non MPU Region 4 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0xE0++0x0F
line.long 0x00 "NONMPUREGION5ADDR_BASE,Non MPU Region 5 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "NONMPUREGION5ADDR_BASEEXT,Non MPU Region 5 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "NONMPUREGION5ADDR_LIMIT,Non MPU Region 5 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "NONMPUREGION5ADDR_LIMITEXT,Non MPU Region 5 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0xF0++0x0F
line.long 0x00 "NONMPUREGION6ADDR_BASE,Non MPU Region 6 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "NONMPUREGION6ADDR_BASEEXT,Non MPU Region 6 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "NONMPUREGION6ADDR_LIMIT,Non MPU Region 6 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "NONMPUREGION6ADDR_LIMITEXT,Non MPU Region 6 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
width 0x0B
tree.end
tree "FIREWALL_DDR_FPGA2SDRAM_INST_0_SCR"
base ad:0xF8020200
width 29.
group.long 0x00++0x03
line.long 0x00 "ENABLE_SET/CLR,Enable Register"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. " REGION3ENABLE    ,Region 3 enable" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x04 2. 0x08 2. "   REGION2ENABLE    ,Region 2 enable" "Disabled,Enabled"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "   REGION1ENABLE    ,Region 1 enable" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "   REGION0ENABLE    ,Region 0 enable" "Disabled,Enabled"
group.long 0x10++0x0F
line.long 0x00 "REGION0ADDR_BASE,Region 0 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION0ADDR_BASEEXT,Region 0 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION0ADDR_LIMIT,Region 0 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION0ADDR_LIMITEXT,Region 0 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x20++0x0F
line.long 0x00 "REGION1ADDR_BASE,Region 1 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION1ADDR_BASEEXT,Region 1 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION1ADDR_LIMIT,Region 1 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION1ADDR_LIMITEXT,Region 1 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x30++0x0F
line.long 0x00 "REGION2ADDR_BASE,Region 2 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION2ADDR_BASEEXT,Region 2 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION2ADDR_LIMIT,Region 2 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION2ADDR_LIMITEXT,Region 2 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x40++0x0F
line.long 0x00 "REGION3ADDR_BASE,Region 3 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION3ADDR_BASEEXT,Region 3 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION3ADDR_LIMIT,Region 3 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION3ADDR_LIMITEXT,Region 3 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
width 0x0B
tree.end
tree "FIREWALL_DDR_FPGA2SDRAM_INST_1_DDR_SCR"
base ad:0xF8020300
width 29.
group.long 0x00++0x03
line.long 0x00 "ENABLE_SET/CLR,Enable Register"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. " REGION3ENABLE    ,Region 3 enable" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x04 2. 0x08 2. "   REGION2ENABLE    ,Region 2 enable" "Disabled,Enabled"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "   REGION1ENABLE    ,Region 1 enable" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "   REGION0ENABLE    ,Region 0 enable" "Disabled,Enabled"
group.long 0x10++0x0F
line.long 0x00 "REGION0ADDR_BASE,Region 0 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION0ADDR_BASEEXT,Region 0 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION0ADDR_LIMIT,Region 0 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION0ADDR_LIMITEXT,Region 0 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x20++0x0F
line.long 0x00 "REGION1ADDR_BASE,Region 1 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION1ADDR_BASEEXT,Region 1 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION1ADDR_LIMIT,Region 1 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION1ADDR_LIMITEXT,Region 1 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x30++0x0F
line.long 0x00 "REGION2ADDR_BASE,Region 2 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION2ADDR_BASEEXT,Region 2 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION2ADDR_LIMIT,Region 2 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION2ADDR_LIMITEXT,Region 2 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x40++0x0F
line.long 0x00 "REGION3ADDR_BASE,Region 3 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION3ADDR_BASEEXT,Region 3 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION3ADDR_LIMIT,Region 3 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION3ADDR_LIMITEXT,Region 3 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
width 0x0B
tree.end
tree "FIREWALL_DDR_FPGA2SDRAM_INST_2_SCR"
base ad:0xF8020400
width 29.
group.long 0x00++0x03
line.long 0x00 "ENABLE_SET/CLR,Enable Register"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. " REGION3ENABLE    ,Region 3 enable" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x04 2. 0x08 2. "   REGION2ENABLE    ,Region 2 enable" "Disabled,Enabled"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "   REGION1ENABLE    ,Region 1 enable" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "   REGION0ENABLE    ,Region 0 enable" "Disabled,Enabled"
group.long 0x10++0x0F
line.long 0x00 "REGION0ADDR_BASE,Region 0 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION0ADDR_BASEEXT,Region 0 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION0ADDR_LIMIT,Region 0 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION0ADDR_LIMITEXT,Region 0 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x20++0x0F
line.long 0x00 "REGION1ADDR_BASE,Region 1 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION1ADDR_BASEEXT,Region 1 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION1ADDR_LIMIT,Region 1 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION1ADDR_LIMITEXT,Region 1 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x30++0x0F
line.long 0x00 "REGION2ADDR_BASE,Region 2 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION2ADDR_BASEEXT,Region 2 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION2ADDR_LIMIT,Region 2 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION2ADDR_LIMITEXT,Region 2 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
group.long 0x40++0x0F
line.long 0x00 "REGION3ADDR_BASE,Region 3 Base Definition Register"
hexmask.long.word 0x00 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x04 "REGION3ADDR_BASEEXT,Region 3 Base Extended Definition Register"
hexmask.long.byte 0x04 0.--4. 0x01 " LOW                 ,5 LSB of the base extended address field"
line.long 0x08 "REGION3ADDR_LIMIT,Region 3 Limit Definition Register"
hexmask.long.word 0x08 16.--31. 0x01 " HIGH                ,16 MSB of the base address field"
line.long 0x0C "REGION3ADDR_LIMITEXT,Region 3 Limit Extended Definition"
hexmask.long.byte 0x0C 0.--4. 0x01 " LOW                 ,5 LSB of the limit extended address field"
width 0x0B
tree.end
tree "DDR_SCHEDULER_CS_OBS_AT_MAIN_ATBENDPOINT"
base ad:0xF8021000
width 12.
rgroup.long 0x00++0x07
line.long 0x00 "COREID,CoreSight Observer Main ATB Endpoint Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "    CORETYPEID ,Identify the type of IP"
line.long 0x04 "REVISIONID,CoreSight Observer Main ATB Endpoint Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "    USERID     ,User defined value"
group.long 0x08++0x0B
line.long 0x00 "ATBID,CoreSight Observer Main ATB Endpoint ATB ID Register"
hexmask.long.byte 0x00 0.--6. 1. " ATBID        ,ATB AtId"
line.long 0x04 "ATBEN,CoreSight Observer Main ATB Endpoint ATB Enable Register"
bitfld.long 0x04 0. " ATBEN        ,ATB unit enable" "Disabled,Enabled"
line.long 0x08 "SYNCPERIOD,CoreSight Observer Main ATB Endpoint Synchronous Period Register"
bitfld.long 0x08 0.--4. " SYNCPERIOD   ,ATB synchro period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
width 0x0B
tree.end
tree "DDR_SCHEDULER_CCU_MEM0_I_MAIN_QOSGENERATOR"
base ad:0xF8022080
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM0_AXI128_I_MAIN_QOSGENERATOR"
base ad:0xF8022100
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM0_AXI132_I_MAIN_QOSGENERATOR"
base ad:0xF8022180
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM0_AXI64_I_MAIN_QOSGENERATOR"
base ad:0xF8022200
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM1_AXI128_I_MAIN_QOSGENERATOR"
base ad:0xF8022280
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM1_AXI132_I_MAIN_QOSGENERATOR"
base ad:0xF8022300
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM1_AXI64_I_MAIN_QOSGENERATOR"
base ad:0xF8022380
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM2_AXI128_I_MAIN_QOSGENERATOR"
base ad:0xF8022400
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM2_AXI132_I_MAIN_QOSGENERATOR"
base ad:0xF8022480
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM2_AXI64_I_MAIN_QOSGENERATOR"
base ad:0xF8022500
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--12. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DDR_SCHEDULER_FPGA2SDRAM_MANAGER_MAIN_SIDEBANDMANAGER"
base ad:0xF8024000
width 18.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,IOS QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM                 ,IP parameters checksum"
hexmask.long.byte 0x00 0.--7. 1. "        CORETYPEID                   ,IP type identity"
line.long 0x04 "ID_REVISIONID,IOS QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID                    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "        USERID                       ,User defined value"
group.long 0x08++0x03
line.long 0x00 "FAULTEN,Fault Enable Register"
bitfld.long 0x00 0. " FAULTEN                      ,Global fault enable" "Disabled,Enabled"
rgroup.long 0x0C++0x03
line.long 0x00 "FAULTSTATUS,Fault Status Register"
bitfld.long 0x00 0. " FAULTSTATUS                  ,Global fault status" "No fault,Fault"
group.long 0x10++0x03
line.long 0x00 "FLAGINEN0,Flag Interrupt Enable 0 Register"
bitfld.long 0x00 11. " FPGA2SDRAM2_RESP_IDLE_EN     ,FPGA2SDRAM2_RESP_IDLE interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 10. "      FPGA2SDRAM2_CMD_IDLE_EN      ,FPGA2SDRAM2_CMD_IDLE interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 9. "      FPGA2SDRAM2_IDLEACK_EN       ,FPGA2SDRAM2_IDLEACK interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " FPGA2SDRAM2_IDLE_EN          ,FPGA2SDRAM2_IDLE interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 7. "      FPGA2SDRAM1_RESP_IDLE_EN     ,FPGA2SDRAM1_RESP_IDLE interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 6. "      FPGA2SDRAM1_CMD_IDLE_EN      ,FPGA2SDRAM1_CMD_IDLE interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " FPGA2SDRAM1_IDLEACK_EN       ,FPGA2SDRAM1_IDLEACK interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "      FPGA2SDRAM1_IDLE_EN          ,FPGA2SDRAM1_IDLE interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "      FPGA2SDRAM0_RESP_IDLE_EN     ,FPGA2SDRAM0_RESP_IDLE interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " FPGA2SDRAM0_CMD_IDLE_EN      ,FPGA2SDRAM0_CMD_IDLE interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "      FPGA2SDRAM0_IDLEACK_EN       ,FPGA2SDRAM0_IDLEACK interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "      FPGA2SDRAM0_IDLE_EN          ,FPGA2SDRAM0_IDLE interrupt enable" "Disabled,Enabled"
rgroup.long 0x14++0x03
line.long 0x00 "FLAGINSTATUS0,Flag Interrupt Status 0 Register"
bitfld.long 0x00 11. " FPGA2SDRAM2_RESP_IDLE_STATUS ,FPGA2SDRAM2_RESP_IDLE interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 10. "  FPGA2SDRAM2_CMD_IDLE_STATUS  ,FPGA2SDRAM2_CMD_IDLE interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "  FPGA2SDRAM2_IDLEACK_STATUS   ,FPGA2SDRAM2_IDLEACK interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " FPGA2SDRAM2_IDLE_STATUS      ,FPGA2SDRAM2_IDLE interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 7. "  FPGA2SDRAM1_RESP_IDLE_STATUS ,FPGA2SDRAM1_RESP_IDLE interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 6. "  FPGA2SDRAM1_CMD_IDLE_STATUS  ,FPGA2SDRAM1_CMD_IDLE interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 5. " FPGA2SDRAM1_IDLEACK_STATUS   ,FPGA2SDRAM1_IDLEACK interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 4. "  FPGA2SDRAM1_IDLE_STATUS      ,FPGA2SDRAM1_IDLE interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 3. "  FPGA2SDRAM0_RESP_IDLE_STATUS ,FPGA2SDRAM0_RESP_IDLE interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 2. " FPGA2SDRAM0_CMD_IDLE_STATUS  ,FPGA2SDRAM0_CMD_IDLE interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 1. "  FPGA2SDRAM0_IDLEACK_STATUS   ,FPGA2SDRAM0_IDLEACK interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 0. "  FPGA2SDRAM0_IDLE_STATUS      ,FPGA2SDRAM0_IDLE interrupt status" "No interrupt,Interrupt"
rgroup.long 0x58++0x03
line.long 0x00 "FLAGOUT0_SET/CLR,Flag Out Status 0 Register"
setclrfld.long 0x00 8. -0x08 8. -0x04 8. " FPGA2SDRAM2_FORCE_DRAIN      ,FPGA2SDRAM2_FORCE_DRAIN status" "Not occurred,Occurred"
setclrfld.long 0x00 7. -0x08 7. -0x04 7. "  FPGA2SDRAM2_ENABLE           ,FPGA2SDRAM2_ENABLE status" "Not occurred,Occurred"
setclrfld.long 0x00 6. -0x08 6. -0x04 6. "  FPGA2SDRAM2_IDLEREQ          ,FPGA2SDRAM2_IDLEREQ status" "Not occurred,Occurred"
newline
setclrfld.long 0x00 5. -0x08 5. -0x04 5. " FPGA2SDRAM1_FORCE_DRAIN      ,FPGA2SDRAM1_FORCE_DRAIN status" "Not occurred,Occurred"
setclrfld.long 0x00 4. -0x08 4. -0x04 4. "  FPGA2SDRAM1_ENABLE           ,FPGA2SDRAM1_ENABLE status" "Not occurred,Occurred"
setclrfld.long 0x00 3. -0x08 3. -0x04 3. "  FPGA2SDRAM1_IDLEREQ          ,FPGA2SDRAM1_IDLEREQ status" "Not occurred,Occurred"
newline
setclrfld.long 0x00 2. -0x08 2. -0x04 2. " FPGA2SDRAM0_FORCE_DRAIN      ,FPGA2SDRAM0_FORCE_DRAIN status" "Not occurred,Occurred"
setclrfld.long 0x00 1. -0x08 1. -0x04 1. "  FPGA2SDRAM0_ENABLE           ,FPGA2SDRAM0_ENABLE status" "Not occurred,Occurred"
setclrfld.long 0x00 0. -0x08 0. -0x04 0. "  FPGA2SDRAM0_IDLEREQ          ,FPGA2SDRAM0_IDLEREQ status" "Not occurred,Occurred"
width 0x0B
tree.end
tree.end
tree "FPGA_BRIDGE_SOC2FPGA (FPGA Bridge SOC 2 FPGA)"
base ad:0x2000000000
width 27.
group.long 0x00++0x03
line.long 0x00 "FPGA_BRIDGE_SOC2FPGA_1G,FPGA Bridge SOC 2 FPGA 1G Default"
button "Data" "d (ad:0x2000000000+0x00)--(ad:0x2000000000+0x3FFFFFFF) /long"
group.long 0x40000000++0x03
line.long 0x00 "FPGA_BRIDGE_SOC2FPGA_512,FPGA Bridge SOC 2 FPGA 512M Default"
button "Data" "d (ad:0x2000000000+0x40000000)--(ad:0x2000000000+0x5FFFFFFF) /long"
group.long 0x60000000++0x03
line.long 0x00 "FPGA_BRIDGE_SOC2FPGA_2.5G,FPGA Bridge SOC 2 FPGA 2.5G Default"
button "Data" "d (ad:0x2000000000+0x60000000)--(ad:0x2000000000+0xFFFFFFFF) /long"
width 0x0B
tree.end
tree "FPGA_BRIDGE_SOC2FPGA_DEF (FPGA Bridge SOC 2 FPGA Default)"
base ad:0x80000000
width 35.
group.long 0x00++0x03
line.long 0x00 "FPGA_BRIDGE_SOC2FPGA_1G_DEFAULT,FPGA Bridge SOC 2 FPGA 1G Default"
button "Data" "d (ad:0x80000000+0x00)--(ad:0x80000000+0x3FFFFFFF) /long"
group.long 0x40000000++0x03
line.long 0x00 "FPGA_BRIDGE_SOC2FPGA_512M_DEFAULT,FPGA Bridge SOC 2 FPGA 512M Default"
button "Data" "d (ad:0x80000000+0x40000000)--(ad:0x80000000+0x5FFFFFFF) /long"
width 0x0B
tree.end
tree "FPGA_BRIDGE_LWSOC2FPGA (FPGA Bridge LWSOC 2 FPGA)"
base ad:0xF9000000
width 27.
group.long 0x00++0x03
line.long 0x00 "FPGA_BRIDGE_LWSOC2FPGA_2M,FPGA Bridge LWSOC 2 FPGA 2M"
button "Data" "d (0xF9000000+0x00)--(0xF9000000+0x1FFFFF) /long"
width 0x0B
tree.end
tree "DMA (Direct Memory Access)"
base ad:0xFFDA0000
width 15.
group.long 0x00++0x03
line.long 0x00 "DMA_NONSECURE,Direct Memory Access Non-Secure"
button "Data" "d (ad:0xFFDA0000+0x00)--(ad:0xFFDA0000+0xFFF) /long"
group.long 0x1000++0x03
line.long 0x00 "DMA_SECURE,Direct Memory Access Secure"
button "Data" "d (ad:0xFFDA0000+0x1000)--(ad:0xFFDA0000+0x1FFF) /long"
width 0x0B
tree.end
tree "OC_RAM (OnChip RAM)"
base ad:0xFFE00000
width 12.
group.long 0x00++0x03
line.long 0x00 "ONCHIP_RAM,OnChip Random Access Memory"
button "Data" "d (ad:0xFFE00000+0x00)--(ad:0xFFE00000+0x3FFFF) /long"
width 0x0B
tree.end
tree.open "ECC (ECC Address Block Group)"
tree "EMAC0 RX"
base ad:0xFF8C0000
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "EMAC0 TX"
base ad:0xFF8C0400
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "EMAC1 RX"
base ad:0xFF8C0800
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "EMAC1 TX"
base ad:0xFF8C0C00
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "EMAC2 RX"
base ad:0xFF8C1000
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "EMAC2 TX"
base ad:0xFF8C1400
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "USB0"
base ad:0xFF8C4000
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "USB1"
base ad:0xFF8C4400
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "NANDe"
base ad:0xFF8C8000
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "NANDr"
base ad:0xFF8C8400
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "NANDw"
base ad:0xFF8C8800
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "SDMMC"
base ad:0xFF8C8C00
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "DMAC"
base ad:0xFF8C9000
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree "OnChip RAM"
base ad:0xFF8CC000
width 18.
rgroup.long 0x00++0x03
line.long 0x00 "IP_REV_ID,IP Slicon Revision ID Register"
hexmask.long.word 0x00 0.--15. 1. "  SIREV            ,Silicon revision number"
group.long 0x08++0x13
line.long 0x00 "CTRL,ECC Control Register"
bitfld.long 0x00 24. "  INITB            ,Start for the hardware memory initialization PORTB" "Not started,Started"
bitfld.long 0x00 16. "    INITA            ,Start for the hardware memory initialization PORTA" "Not started,Started"
bitfld.long 0x00 9. "    CNT_RSTB         ,Internal single-bit error counter B reset" "No reset,Reset"
newline
bitfld.long 0x00 8. "  CNT_RSTA         ,Internal single-bit error counter A reset" "No reset,Reset"
bitfld.long 0x00 1. "       ECC_SLVERR_DIS   ,Enable to prevent double-bit ECC error from triggering BUS ERROR on IP-interface" "Disabled,Enabled"
bitfld.long 0x00 0. "       ECC_EN           ,Enable for the ECC detection and correction logic" "Disabled,Enabled"
line.long 0x04 "INITSTAT,Initialization Status Register"
bitfld.long 0x04 8. "  INITCOMPLETEB    ,PORTB hardware memory initialization completed" "Not completed,Completed"
bitfld.long 0x04 0. "  INITCOMPLETEA    ,PORTA hardware memory initialization completed" "Not completed,Completed"
line.long 0x08 "ERRINTEN,Error Interrupt Enable"
bitfld.long 0x08 0. "  SERRINTEN        ,ECC RAM system single bit error interrupt enable" "Disabled,Enabled"
line.long 0x0C "ERRINTENS,Error Interrupt Set"
bitfld.long 0x0C 0. "  SERRINTS         ,ECC RAM system single bit error interrupt enable set" "No set,Set"
line.long 0x10 "ERRINTENR,Error Interrupt Reset"
bitfld.long 0x10 0. "  SERRINTR         ,ECC RAM system single bit error interrupt enable reset" "No reset,Reset"
group.long 0x1C++0x0F
line.long 0x00 "INTMODE,Interrupt Mode Register"
bitfld.long 0x00 16. "  INTONCMP         ,Enable interrupt on compare" "Disabled,Enabled"
bitfld.long 0x00 8. "       INTONOVF         ,Enable interrupt on overflow" "Disabled,Enabled"
bitfld.long 0x00 0. "       INTMODE          ,Interrupt mode for single-bit error" "Disabled,Enabled"
line.long 0x04 "INTSTAT,Interrupt Status Register"
bitfld.long 0x04 24. "  DERRPENB         ,Double-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 16. "       SERRPENB         ,Single-bit error pending for PORTB" "No error,Error"
bitfld.long 0x04 8. "       DERRPENA         ,Double-bit error pending for PORTA" "No error,Error"
newline
bitfld.long 0x04 0. "  SERRPENA         ,Single-bit error pending for PORTA" "No error,Error"
line.long 0x08 "INTTEST,Interrupt Test Register"
bitfld.long 0x08 24. "  TDERRB           ,Test PORTB double-bit error" "No error,Error"
bitfld.long 0x08 16. "       TSERRB           ,Test PORTB Single-bit error" "No error,Error"
bitfld.long 0x08 8. "       TDERRA           ,Test PORTA double-bit error" "No error,Error"
newline
bitfld.long 0x08 0. "  TSERRA           ,Test PORTA single-bit error" "No error,Error"
line.long 0x0C "MODSTAT,Mode Status Flag Register"
bitfld.long 0x0C 5. "  RMW_DERRB        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 4. "  RMW_DERRA        ,Indicates that a RMW access due to a subword access generated a DERR" "Not generated,Generated"
bitfld.long 0x0C 3. "  RMW_SERRB        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
newline
bitfld.long 0x0C 2. "  RMW_SERRA        ,Indicates that a RMW access due to a subword access generated a SERR" "Not generated,Generated"
bitfld.long 0x0C 1. "  CMPFLGB          ,Port B compare status flag" "No match,Match"
bitfld.long 0x0C 0. "       CMPFLGA          ,Port A compare status flag" "No match,Match"
rgroup.long 0x2C++0x0F
line.long 0x00 "DERRADDRA,PORTA Current Double-bit Error Address Register"
hexmask.long 0x00 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x04 "SERRADDRA,PORTA Current Single-bit Error Address Register"
hexmask.long 0x04 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
line.long 0x08 "DERRADDRB,PORTB Current Double-bit Error Address Register"
hexmask.long 0x08 0.--30. 0x01 "  ADDRESS          ,Recent double-bit error address"
line.long 0x0C "SERRADDRB,PORTB Current Single-bit Error Address Register"
hexmask.long 0x0C 0.--30. 0x01 "  ADDRESS          ,Recent single-bit error address"
group.long 0x3C++0x07
line.long 0x00 "SERRCNTREG,Maximum Counter Value For Single-bit Error Interrupt Register"
line.long 0x04 "ECC_ADDRBUS,Address Bus Register"
hexmask.long.word 0x04 0.--30. 0x01 "  ECC_ADDRBUS      ,Address bus value"
rgroup.long 0x44++0x0F
line.long 0x00 "ECC_RDATA0BUS,Read Data Bus Register 0"
line.long 0x04 "ECC_RDATA1BUS,Read Data Bus Register 1"
line.long 0x08 "ECC_RDATA2BUS,Read Data Bus Register 2"
line.long 0x0C "ECC_RDATA3BUS,Read Data Bus Register 3"
wgroup.long 0x54++0x0F
line.long 0x00 "ECC_WDATA0BUS,Write Data Bus Register 0"
line.long 0x04 "ECC_WDATA1BUS,Write Data Bus Register 1"
line.long 0x08 "ECC_WDATA2BUS,Write Data Bus Register 2"
line.long 0x0C "ECC_WDATA3BUS,Write Data Bus Register 3"
rgroup.long 0x64++0x07
line.long 0x00 "ECC_RDATAECC0BUS,Read Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_RDATAECC3BUS ,Read data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_RDATAECC2BUS ,Read data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_RDATAECC1BUS ,Read data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_RDATAECC0BUS ,Read data bus ECC value 0"
line.long 0x04 "ECC_RDATAECC1BUS,Read Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_RDATAECC7BUS ,Read data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_RDATAECC6BUS ,Read data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_RDATAECC5BUS ,Read data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_RDATAECC4BUS ,Read data bus ECC value 4"
wgroup.long 0x6C++0x07
line.long 0x00 "ECC_WDATAECC0BUS,Write Data Bus ECC Register 0"
hexmask.long.byte 0x00 24.--31. 1. "  ECC_WDATAECC3BUS ,Write data bus ECC value 3"
hexmask.long.byte 0x00 16.--23. 1. "             ECC_WDATAECC2BUS ,Write data bus ECC value 2"
hexmask.long.byte 0x00 8.--15. 1. "             ECC_WDATAECC1BUS ,Write data bus ECC value 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "  ECC_WDATAECC0BUS ,Write data bus ECC value 0"
line.long 0x04 "ECC_WDATAECC1BUS,Write Data Bus ECC Register 1"
hexmask.long.byte 0x04 24.--31. 1. "  ECC_WDATAECC7BUS ,Write data bus ECC value 7"
hexmask.long.byte 0x04 16.--23. 1. "             ECC_WDATAECC6BUS ,Write data bus ECC value 6"
hexmask.long.byte 0x04 8.--15. 1. "             ECC_WDATAECC5BUS ,Write data bus ECC value 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "  ECC_WDATAECC4BUS ,Write data bus ECC value 4"
group.long 0x74++0x0F
line.long 0x00 "ECC_DBYTECTRL,DBYTE Control Register"
hexmask.long.byte 0x00 0.--7. 1. "  DBEN             ,Byte or word enable for access"
line.long 0x04 "ECC_ACCCTRL,RAM Access Control Register"
bitfld.long 0x04 8. "  RDWR             ,Control for read/write" "0,1"
bitfld.long 0x04 1. "              ECCOVR           ,ECC Data Override" "No override,Override"
bitfld.long 0x04 0. "    DATAOVR          ,RAM Data Override" "No override,Override"
line.long 0x08 "ECC_STARTACC,RAM Access Start Register"
bitfld.long 0x08 16. "  ENBUSA           ,PORTA RAM access enable" "Disabled,Enabled"
bitfld.long 0x08 0. "       ENBUSB           ,PORTB RAM access enable" "Disabled,Enabled"
line.long 0x0C "ECC_WDCTRL,Watchdog Control Register"
bitfld.long 0x0C 0. "  WDEN_RAM         ,Enable watchdog timeout for OCP register access to IP RAM" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "SERRLKUPA0,PORTA Single-bit Error LOOKUP TABLE Address Register 0"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
group.long 0xD0++0x03
line.long 0x00 "SERRLKUPB0,PORTB Single-bit Error LOOKUP TABLE Address Register 1"
bitfld.long 0x00 31. "  VALID8           ,Valid flag bit 8" "Invalid,Valid"
bitfld.long 0x00 30. "        VALID7           ,Valid flag bit 7" "Invalid,Valid"
bitfld.long 0x00 29. "        VALID6           ,Valid flag bit 6" "Invalid,Valid"
newline
bitfld.long 0x00 28. "  VALID5           ,Valid flag bit 5" "Invalid,Valid"
bitfld.long 0x00 27. "        VALID4           ,Valid flag bit 4" "Invalid,Valid"
bitfld.long 0x00 26. "        VALID3           ,Valid flag bit 3" "Invalid,Valid"
newline
bitfld.long 0x00 25. "  VALID2           ,Valid flag bit 2" "Invalid,Valid"
bitfld.long 0x00 24. "        VALID1           ,Valid flag bit 1" "Invalid,Valid"
hexmask.long.tbyte 0x00 0.--23. 0x01 "        ADDRESS          ,Recent single-bit error address"
rgroup.long 0x04++0x03
line.long 0x00 "IP_REV_ID2,IP Memory Configuration"
bitfld.long 0x00 16.--19. "  LUT_TBL_DEP      ,Lookup table depth" ",4 words,8 words,,16 words,,,,20 words,?..."
bitfld.long 0x00 13.--15. "       RAM_TYPE         ,Defines RAM type" ",Single,Simple dual,True dual,?..."
bitfld.long 0x00 10.--12. "    ECC_SIZE         ,ECC size" ",5 bits,6 bits,7 bits,8 bits,?..."
newline
bitfld.long 0x00 5.--9. "  DAT              ,Data width" "8 bits,16 bits,32 bits,35 bits,64 bits,128 bits,256 bits,512 bits,?..."
bitfld.long 0x00 0.--4. "       ADDR             ,Number of address bits" "1 byte,2 byte,4 byte,8 byte,16 byte,32 byte,64 byte,128 byte,256 byte,512 byte,1Kb,2Kb,4Kb,8Kb,16Kb,32Kb,64Kb,128kb,256Kb,512Kb,1Mb,2Mb,4Mb,8Mb,16Mb,32Mb,64Mb,128Mb,256Mb,512Mb,1Gb,2Gb"
group.long 0x84++0x03
line.long 0x00 "ECC_DECODERSTAT,ECC Decoder Status Register"
eventfld.long 0x00 15. "  DEC7DERRFLG      ,This bit indicates decoder 7 has detected double-bit error" "No error,Error"
eventfld.long 0x00 14. "       DEC6DERRFLG      ,This bit indicates decoder 6 has detected double-bit error" "No error,Error"
eventfld.long 0x00 13. "       DEC5DERRFLG      ,This bit indicates decoder 5 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 12. "  DEC4DERRFLG      ,This bit indicates decoder 4 has detected double-bit error" "No error,Error"
eventfld.long 0x00 11. "       DEC3DERRFLG      ,This bit indicates decoder 3 has detected double-bit error" "No error,Error"
eventfld.long 0x00 10. "       DEC2DERRFLG      ,This bit indicates decoder 2 has detected double-bit error" "No error,Error"
newline
eventfld.long 0x00 9. "  DEC1DERRFLG      ,This bit indicates decoder 1 has detected double-bit error" "No error,Error"
eventfld.long 0x00 8. "       DEC0DERRFLG      ,This bit indicates decoder 0 has detected double-bit error" "No error,Error"
eventfld.long 0x00 7. "       DEC7SERRFLG      ,This bit indicates decoder 7 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 6. "  DEC6SERRFLG      ,This bit indicates decoder 6 has detected single-bit error" "No error,Error"
eventfld.long 0x00 5. "       DEC5SERRFLG      ,This bit indicates decoder 5 has detected single-bit error" "No error,Error"
eventfld.long 0x00 4. "       DEC4SERRFLG      ,This bit indicates decoder 4 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 3. "  DEC3SERRFLG      ,This bit indicates decoder 3 has detected single-bit error" "No error,Error"
eventfld.long 0x00 2. "       DEC2SERRFLG      ,This bit indicates decoder 2 has detected single-bit error" "No error,Error"
eventfld.long 0x00 1. "       DEC1SERRFLG      ,This bit indicates decoder 1 has detected single-bit error" "No error,Error"
newline
eventfld.long 0x00 0. "  DEC0SERRFLG      ,This bit indicates decoder 0 has detected single-bit error" "No error,Error"
width 0x0B
tree.end
tree.end
tree.open "CLK_MGR (Clock Manager)"
tree "CLK_MGR_CTRL (Control Status)"
base ad:0xFFD10000
width 12.
group.long 0x00++0x03
line.long 0x00 "CTRL,Control Register"
bitfld.long 0x00 9. " SWCTRLBTCLKSEL ,Select boot_clk source" "External oscillator,Cb_intosc_hs_clk/2"
bitfld.long 0x00 8. "  SWCTRLBTCLKEN ,Control of the boot_clk MUX select" "Security features,SWCTRLBTCLKSEL"
bitfld.long 0x00 0. "  BOOTMODE        ,Boot mode enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "STAT,Status Register"
bitfld.long 0x00 17. " BOOTCLKSRC     ,Source of boot_clk select" "External oscillator,Cb_intosc_hs_clk/2"
bitfld.long 0x00 16. "  BOOTMODE      ,Boot mode enable" "Disabled,Enabled"
bitfld.long 0x00 9. "           PERPLLLOCKED    ,The Peripheral PLL locker" "Not locked,Locked"
bitfld.long 0x00 8. "   MAINPLLLOCKED    ,The Main PLL locker" "Not locked,Locked"
bitfld.long 0x00 0. "  BUSY ,This bit indicates that the Hardware Managed clock's state machine is active" "Stable,In transition"
group.long 0x08++0x0B
line.long 0x00 "TESTIOCTRL,Test IO Control Register"
bitfld.long 0x00 4. " DEBUGCLKSEL    ,Selects the source of PLL_lock for debug purpose" "Main,Periph"
bitfld.long 0x00 2. "               PERICLKSEL    ,Selects between Channel 1 and channel 0 of the peripheral PLL" "MPU,NOC"
bitfld.long 0x00 0. "                MAINCLKSEL      ,Selects between Channel 1 and channel 0 of the main PLL" "MPU,NOC"
line.long 0x04 "INTRGEN,Global Interrupt Enable Register"
bitfld.long 0x04 0. " EN             ,Global interrupt enable" "Disabled,Enabled"
line.long 0x08 "INTRMSK,Interrupt Mask Register"
bitfld.long 0x08 3. " PERLOCKLOST    ,Lost interrupt from periph PLL mask" "Masked,Not masked"
bitfld.long 0x08 2. "           MAINLOCKLOST  ,Lost interrupt from main PLL mask" "Masked,Not masked"
bitfld.long 0x08 1. "         PERLOCKACHIEVED ,Achieved interrupt from periph PLL mask" "Masked,Not masked"
bitfld.long 0x08 0. "   MAINLOCKACHIEVED ,Achieved interrupt from main PLL mask" "Masked,Not masked"
wgroup.long 0x14++0x03
line.long 0x00 "INTRCLR,Interrupt Clear Register"
bitfld.long 0x00 3. " PERLOCKLOST    ,This is used to clear sticky periph PLL lock lost signal" "Not Cleared,Cleared"
bitfld.long 0x00 2. "          MAINLOCKLOST  ,This is used to clear sticky main PLL lock lost signal" "Not Cleared,Cleared"
bitfld.long 0x00 1. "        PERLOCKACHIEVED ,This is used to clear sticky periph PLL lock achieved signal" "Not Cleared,Cleared"
bitfld.long 0x00 0. "  MAINLOCKACHIEVED ,This is used to clear sticky main PLL lock achieved signal" "Not Cleared,Cleared"
rgroup.long 0x18++0x0B
line.long 0x00 "INTRSTS,Interrupt Pending Status After The Interrupt Masks Register"
bitfld.long 0x00 3. " PERLOCKLOST    ,Pending status for periph PLL lock lost interrupt after intr mask" "Not pending,Pending"
bitfld.long 0x00 2. "          MAINLOCKLOST  ,Pending status for main PLL lock lost interrupt after intr mask" "Not pending,Pending"
bitfld.long 0x00 1. "        PERLOCKACHIEVED ,Pending status for periph PLL lock achieved interrupt after intr mask" "Not pending,Pending"
bitfld.long 0x00 0. "  MAINLOCKACHIEVED ,Pending status for main PLL lock achieved interrupt after intr mask" "Not pending,Pending"
line.long 0x04 "INTRSTK,Interrupt Pending Status Without Considering The Interrupt Masks Register"
bitfld.long 0x04 3. " PERLOCKLOST    ,Pending status for periph PLL lock lost interrupt before intr mask" "Not pending,Pending"
bitfld.long 0x04 2. "          MAINLOCKLOST  ,Pending status for main PLL lock lost interrupt before intr mask" "Not pending,Pending"
bitfld.long 0x04 1. "        PERLOCKACHIEVED ,Pending status for periph PLL lock achieved interrupt before intr mask" "Not pending,Pending"
bitfld.long 0x04 0. "  MAINLOCKACHIEVED ,Pending status for main PLL lock achieved interrupt before intr mask" "Not pending,Pending"
line.long 0x08 "INTRRAW,Realtime Status Of The Bits Which Could Have Caused Interrupt Register"
bitfld.long 0x08 3. " PERLOCKLOST    ,Raw signal from clock manager (before masking) for periph PLL lock lost" "0,1"
bitfld.long 0x08 2. "                    MAINLOCKLOST  ,Raw signal from clock manager (before masking) for main PLL lock lost" "0,1"
bitfld.long 0x08 1. "                  PERLOCKACHIEVED ,Raw signal from clock manager (before masking) for periph PLL lock achieved" "0,1"
bitfld.long 0x08 0. "            MAINLOCKACHIEVED ,Raw signal from clock manager (before masking) for main PLL lock achieved" "0,1"
width 0x0B
tree.end
tree "MAINPLL_GRP (Control Status)"
base ad:0xFFD10030
width 16.
group.long 0x04++0x0B
line.long 0x00 "EN_SET/CLR,Enable Set/Clear Register"
setclrfld.long 0x00 6. 0x04 6. 0x08 6. " S2FUSER0CLKEN ,Enables Clock S2F_USER0_CLK Output" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x04 5. 0x08 5. "       CSTIMERCLKEN ,Enables Debug Timer Clock Output (CS_TIMER_CLK)" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x04 4. 0x08 4. "       CSCLKEN  ,Enables Debug Clock Outputs (CS_AT_CLK and CS_PDBG_CLK and CS_TRACE_CLK)" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. "      L4SPCLKEN ,Enables Clock L4_SP_CLK Output" "Disabled,Enabled"
newline
setclrfld.long 0x00 2. 0x04 2. 0x08 2. " L4MPCLKEN     ,Enables Clock L4_MP_CLK Output" "Disabled,Enabled"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "       L4MAINCLKEN  ,Enables Clock L4_MAIN_CLK Output" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "       MPUCLKEN ,Enable For MPU Clock Group (MPU_CLK and MPU_L2RAM_CLK and MPU_PERIPH_CLK)" "Disabled,Enabled"
group.long 0x0C++0x0B
line.long 0x00 "BYPASS_SET/CLR,Bypass Set Clear Register"
setclrfld.long 0x00 2. 0x04 2. 0x08 2. " S2FUSER0      ,If set the s2f_user0_clk will be bypassed to the boot_clk" "Not bypassed,Bypassed"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "   NOC          ,If set the NOC clock group will be bypassed to boot_clk" "Not bypassed,Bypassed"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "   MPU      ,If set the MPU clock group will be bypassed to the boot_clk" "Not bypassed,Bypassed"
group.long 0x18++0x37
line.long 0x00 "MPUCLK,Main PLL Control Register for MPU Clock Group"
bitfld.long 0x00 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x00 0.--10. 1. "         CNT          ,Divides the VCO/2 frequency by the value+1 in this field"
line.long 0x04 "NOCCLK,Main PLL Control Register for NOC Clock Group"
bitfld.long 0x04 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x04 0.--10. 1. "         CNT          ,Divides the VCO frequency by the value+1 in this field"
line.long 0x08 "CNTR2CLK,Main PLL Control Register for Counter 2 Clock"
hexmask.long.word 0x08 0.--10. 1. " CNT           ,Divides the VCO frequency by the value+1 in this field"
line.long 0x0C "CNTR3CLK,Main PLL Control Register for Counter 3 Clock"
hexmask.long.word 0x0C 0.--10. 1. " CNT           ,Divides the VCO frequency by the value+1 in this field"
line.long 0x10 "CNTR4CLK,Main PLL Control Register for Counter 4 Clock"
hexmask.long.word 0x10 0.--10. 1. " CNT           ,Divides the VCO frequency by the value+1 in this field"
line.long 0x14 "CNTR5CLK,Main PLL Control Register for Counter 5 Clock"
hexmask.long.word 0x14 0.--10. 1. " CNT           ,Divides the VCO frequency by the value+1 in this field"
line.long 0x18 "CNTR6CLK,Main PLL Control Register for Counter 6 Clock"
hexmask.long.word 0x18 0.--10. 1. " CNT           ,Divides the VCO frequency by the value+1 in this field"
line.long 0x1C "CNTR7CLK,Main PLL Control Register for Counter 7 Clock"
bitfld.long 0x1C 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x1C 0.--10. 1. "         CNT          ,Divides the VCO frequency by the value+1 in this field"
line.long 0x20 "CNTR8CLK,Main PLL Control Register for Counter 8 Clock"
hexmask.long.word 0x20 0.--10. 1. " CNT           ,Divides the VCO frequency by the value+1 in this field"
line.long 0x24 "CNTR9CLK,Main PLL Control Register for Counter 9 Clock"
hexmask.long.word 0x24 0.--10. 1. " CNT           ,Divides the VCO frequency by the value+1 in this field"
line.long 0x28 "NOCDIV,NOC Divide Register"
bitfld.long 0x28 28. " CSPDBGCLK     ,The external CS_PDBG_CLK divider" "/1,/4"
bitfld.long 0x28 26.--27. "             CSTRACECLK   ,The external CS_TRACE_CLK divider" "/1,/2,/4,/8"
bitfld.long 0x28 24.--25. "             CSATCLK  ,The external CS_AT_CLK divider" "/1,/2,/4,/8"
bitfld.long 0x28 16.--17. "            L4SPCLK   ,The external L4_SP_CLK divider" "/1,/2,/4,/8"
newline
bitfld.long 0x28 8.--9. " L4MPCLK       ,The external L4_MP_CLK divider" "/1,/2,/4,/8"
bitfld.long 0x28 0.--1. "             L4MAINCLK    ,The external L4_MAIN_CLK divider" "/1,/2,/4,/8"
line.long 0x2C "PLLGLOB,This Reflects Register Settings For Both The Channels Of The Main PLL"
bitfld.long 0x2C 16.--17. " PSRC          ,Controls the VCO input clock source" "EOSC1_CLK,CB_INTOSC_CLK,F2S_FREE_CLK,?..."
bitfld.long 0x2C 8.--13. "  REFCLKDIV    ,Reference clock divider control registers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x2C 3. "             MODSEL   ,Terger mode" "Int,Float"
newline
bitfld.long 0x2C 2. " MUTE          ,Mutes all PLL outputs glitch-free" "Unmuted,Muted"
bitfld.long 0x2C 1. "        RST          ,PLL hard reset" "Reset,No reset"
bitfld.long 0x2C 0. "       PD       ,PLL Disable/Power-down control" "Powerdown,Powerup"
line.long 0x30 "FDBCK,VCO Freq Register Counters"
hexmask.long.byte 0x30 24.--31. 1. " MDIV          ,Feedback clock divider"
hexmask.long.tbyte 0x30 0.--23. 1. "             FDIV         ,Fractional synthesizer center frequency control word"
line.long 0x34 "MEM,Register Dealing With PLL Internal Memory Access"
bitfld.long 0x34 25. " WR            ,Memory read/write signal" "Read,Write"
bitfld.long 0x34 24. "          REQ          ,Memory request signal" "Not requested,Requested"
hexmask.long.byte 0x34 16.--23. 1. "  WDAT     ,Memory write data"
hexmask.long.word 0x34 0.--9. 0x01 "            ADDR      ,PLL memory addressing"
rgroup.long 0x50++0x03
line.long 0x00 "MEMSTAT,Periph PLL Memstatus Register"
hexmask.long.byte 0x00 0.--7. 1. " RDATA         ,Memory read data"
group.long 0x54++0x0B
line.long 0x00 "PLLC0,Channel C0 Frequency Settings For The Main PLL Register"
bitfld.long 0x00 27. " EN            ,PLL channel 0 output enable" "Disabled,Enabled"
bitfld.long 0x00 26. "       BYPAS        ,PLL channel 0 output bypass" "Unbypass,Bypass"
bitfld.long 0x00 25. "       PHRST    ,If ictl_vpll_pr1_phrst_a=1'b1 the phase of PLLC0 clock is reset to default phase as the PLL is just started" "Rstdeassert,Rstassert"
bitfld.long 0x00 24. "   PHINC     ,When a positive edge is induced one of the positive edges of PLLC0 clock is pushed out by 1/8th of VCO period" "Unpush,Push"
newline
hexmask.long.byte 0x00 0.--7. 1. " DIV           ,PLL channel 0 divider ratio in binary code"
line.long 0x04 "PLLC1,Channel C1 Settings For The Main PLL Register"
bitfld.long 0x04 27. " PHRST         ,If ictl_vpll_pr1_phrst_a=1'b1 the phase of PLLC1 clock is reset to default phase as the PLL is just started" "Rstdeassert,Rstassert"
bitfld.long 0x04 26. "    PHINC        ,When a positive edge is induced one of the positive edges of PLLC1 clock is pushed out by 1/8th of VCO period" "Unpush,Push"
bitfld.long 0x04 25. "         BYPAS    ,PLL channel 1 output bypass" "Unbypass,Bypass"
bitfld.long 0x00 24. "      EN        ,PLL channel 1 output enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 0.--7. 1. " DIV           ,PLL channel 1 divider ratio in binary code"
line.long 0x08 "VCOCALIB,VCO Calibration Control Register"
bitfld.long 0x08 23.--24. " TERMIN        ,Termination Calibration Control Look-Up Table Select" "0,1,2,3"
hexmask.long.word 0x08 9.--16. 1. "              MSCNT        ,MSCNT = 200/(fvco/fref)"
hexmask.long.byte 0x08 0.--7. 1. "           HSCNT    ,VCO calibration parameter"
width 0x0B
tree.end
tree "PERIPHPLL_GRP (Settings for the Peripheral PLL)"
base ad:0xFFD100A4
width 16.
group.long 0x00++0x0B
line.long 0x00 "EN_SET/CLR,Enable Set/Clear Register"
setclrfld.long 0x00 10. 0x04 10. 0x08 10. " NANDCLKEN     ,Enables NAND peripheral clock" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x04 9. 0x08 9. "       SPIMCLKEN  ,Enables SPI Master peripheral clock" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x04 8. 0x08 8. "       USBCLKEN ,Enables USB peripheral clock" "Disabled,Enabled"
setclrfld.long 0x00 7. 0x04 7. 0x08 7. "       PSICLKEN  ,Enables PSI_REF clock" "Disabled,Enabled"
newline
setclrfld.long 0x00 6. 0x04 6. 0x08 6. " S2FUSER1CLKEN ,Enables clock S2F_USER1_CLK output" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x04 5. 0x08 5. "       SDMMCCLKEN ,Enables SDMMC peripheral clock" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x04 4. 0x08 4. "       GPIODBEN ,Enables clock GPIO_DB_CLK output" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. "       EMACPTPEN ,Enables clock EMAC_PTP_CLK output" "Disabled,Enabled"
newline
setclrfld.long 0x00 2. 0x04 2. 0x08 2. " EMAC2EN       ,Enables clock EMAC2_CLK output" "Disabled,Enabled"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "       EMAC1EN    ,Enables clock EMAC1_CLK output" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "       EMAC0EN  ,Enables clock EMAC0_CLK output" "Disabled,Enabled"
group.long 0x0C++0x0B
line.long 0x00 "BYPASS_SET/CLR,Bypass Set/Clear Register"
setclrfld.long 0x00 6. 0x04 6. 0x08 6. " PSIREF        ,If set the PSI_REF_CLK will be bypassed to the input clock reference of the Peripheral PLL" "0,1"
setclrfld.long 0x00 5. 0x04 5. 0x08 5. "              S2FUSER1   ,If set the S2F_USER1_CLK will be bypassed to the input clock reference of the Peripheral PLL" "0,1"
setclrfld.long 0x00 4. 0x04 4. 0x08 4. "              SDMMC    ,If set the SDMMC_CLK will be bypassed to the input clock reference of the Peripheral PLL" "0,1"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. "              GPIODB    ,If set the GPIO_DB_CLK will be bypassed to the input clock reference of the Peripheral PLL" "0,1"
newline
setclrfld.long 0x00 2. 0x04 2. 0x08 2. " EMACPTP       ,If set the EMAC_PTP_CLK will be bypassed to the input clock reference of the Peripheral PLL" "0,1"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "              EMACB      ,If set the EMACB_FREE_CLK will be bypassed to the input clock reference of the Main PLL" "0,1"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "              EMACA    ,If set the EMACA_FREE_CLK will be bypassed to the input clock reference of the Main PLL" "0,1"
group.long 0x18++0x33
line.long 0x00 "CNTR2CLK,Peripheral PLL Control Register for Counter 2 Clock"
bitfld.long 0x00 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x00 0.--10. 1. "         CNT        ,Divides the VCO frequency by the value+1 in this field"
line.long 0x04 "CNTR3CLK,Peripheral PLL Control Register for Counter 3 Clock"
bitfld.long 0x04 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x04 0.--10. 1. "         CNT        ,Divides the VCO frequency by the value+1 in this field"
line.long 0x08 "CNTR4CLK,Peripheral PLL Control Register for Counter 4 Clock"
bitfld.long 0x08 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x08 0.--10. 1. "         CNT        ,Divides the VCO frequency by the value+1 in this field"
line.long 0x0C "CNTR5CLK,Peripheral PLL Control Register for Counter 5 Clock"
bitfld.long 0x0C 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x0C 0.--10. 1. "         CNT        ,Divides the VCO frequency by the value+1 in this field"
line.long 0x10 "CNTR6CLK,Peripheral PLL Control Register for Counter 6 Clock"
bitfld.long 0x10 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x10 0.--10. 1. "         CNT        ,Divides the VCO frequency by the value+1 in this field"
line.long 0x14 "CNTR7CLK,Peripheral PLL Control Register for Counter 7 Clock"
hexmask.long.word 0x14 0.--10. 1. " CNT           ,Divides the VCO frequency by the value+1 in this field"
line.long 0x18 "CNTR8CLK,Peripheral PLL Control Register for Counter 8 Clock"
bitfld.long 0x18 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x18 0.--10. 1. "         CNT        ,Divides the VCO frequency by the value+1 in this field"
line.long 0x1C "CNTR9CLK,Periph PLL Control Register for Counter 10 Clock"
bitfld.long 0x1C 16.--18. " SRC           ,Selects the source for the active 5:1 clock selection when the PLL is not bypassed" "MAIN,PERI,OSC1,INTOSC,FPGA,?..."
hexmask.long.word 0x1C 0.--10. 1. "         CNT        ,Divides the VCO frequency by the value+1 in this field"
line.long 0x20 "EMACCTL,Main Divide Register"
bitfld.long 0x20 28. " EMAC2SEL      ,Selects the source for EMAC2_CLK as either EMACA_FREE_CLK or EMACB_FREE_CLK" "EMAC A,EMAC B"
bitfld.long 0x20 27. "         EMAC1SEL   ,Selects the source for EMAC1_CLK as either EMACA_FREE_CLK or EMACB_FREE_CLK" "EMAC A,EMAC B"
bitfld.long 0x20 26. "         EMAC0SEL ,Selects the source for EMAC0_CLK as either EMACA_FREE_CLK or EMACB_FREE_CLK" "EMAC A,EMAC B"
line.long 0x24 "GPIODIV,GPIO Divide Register"
hexmask.long.word 0x24 0.--15. 1. " GPIODBCLK     ,The GPIO_DB_CLK is divided down from the PERIPH_BASE_CLK by the value plus one specified in this field"
line.long 0x28 "PLLGLOB,Settings For Both The Channels Of The Periph PLL Register"
bitfld.long 0x28 16.--17. " PSRC          ,Controls the VCO input clock source" "EOSC1_CLK,CB_INTOSC_CLK,F2S_FREE_CLK,?..."
bitfld.long 0x28 8.--13. "  REFCLKDIV  ,Reference clock divider control registers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x28 3. "             MODSEL   ,Terger mode" "INT,FLOAT"
newline
bitfld.long 0x28 2. " MUTE          ,Mutes all PLL outputs glitch-free" "Unmuted,Muted"
bitfld.long 0x28 1. "        RST        ,PLL hard reset" "Reset,No reset"
bitfld.long 0x28 0. "       PD       ,PLL Disable/Power-Down control" "Powerdown,Powerup"
line.long 0x2C "FDBCK,VCO Freq Counters Register"
hexmask.long.byte 0x2C 24.--31. 1. " MDIV          ,Feedback clock divider"
hexmask.long.tbyte 0x2C 0.--23. 1. "             FDIV       ,Fractional synthesizer center frequency control word"
line.long 0x30 "MEM,Dealing With PLL Internal Memory Access Register"
bitfld.long 0x30 25. " WR            ,Memory read/write signal" "Read,Write"
bitfld.long 0x30 24. "          REQ        ,Memory request signal" "Not requested,Requested"
hexmask.long.byte 0x30 16.--23. 1. "  WDAT     ,Memory write data"
hexmask.long.word 0x30 0.--9. 0x01 "             ADDR      ,PLL memory addressing"
rgroup.long 0x4C++0x03
line.long 0x00 "MEMSTAT,Periph PLL Memstatus Register"
hexmask.long.byte 0x00 0.--7. 1. " RDATA         ,Memory read data"
group.long 0x50++0x0B
line.long 0x00 "PLLC0,Channel C0 Frequency Settings For The Periph PLL Register"
bitfld.long 0x00 27. " EN            ,PLL channel 0 output enable" "Disabled,Enabled"
bitfld.long 0x00 26. "       BYPAS      ,PLL channel 0 output bypass" "Unbypassed,Bypassed"
bitfld.long 0x00 25. "     PHRST    ,PLLC0 clock reset to default phase" "Rstdeasserted,Rstasserted"
bitfld.long 0x00 24. "  PHINC     ,When a positive edge is induced one of the positive edges of PLLC0 clock is pushed out by 1/8th of VCO period" "Unpushed,Pushed"
newline
hexmask.long.byte 0x00 0.--7. 1. " DIV           ,PLL channel 0 divider ratio in binary code"
line.long 0x04 "PLLC1,Channel C1 Frequency Settings For The Periph PLL Register"
bitfld.long 0x04 27. " PHRST         ,PLLC1 clock reset to default phase" "Rstdeasserted,Rstasserted"
bitfld.long 0x04 26. "  PHINC      ,PLLC1 clock push out by 1/8th of VCO period" "Unpushed,Pushed"
bitfld.long 0x04 25. "       BYPAS    ,PLL channel 1 output bypass" "Unbypassed,Bypassed"
bitfld.long 0x04 24. "     EN        ,PLL channel 1 output enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 0.--7. 1. " DIV           ,PLL channel 1 divider ratio in binary code"
line.long 0x08 "VCOCALIB,VCO Calibration Control Register"
bitfld.long 0x08 23.--24. " TERMIN        ,Termination calibration control look-up table select" "0,1,2,3"
hexmask.long.word 0x08 9.--16. 1. "              MSCNT      ,MSCNT = 200/(fvco/fref)"
hexmask.long.byte 0x08 0.--7. 1. "           HSCNT    ,VCO calibration parameter"
width 0x0B
tree.end
tree.end
tree.open "SDM (SDM Address Block Group)"
tree "SDM SDMMC"
base ad:0xFF8D1000
width 18.
group.long 0x00++0x0B
line.long 0x00 "CTRL,Control Register"
bitfld.long 0x00 25. " USE_INTERNAL_DMAC                   ,Use internal DMAC" "Slave interface,Internal DMAC"
bitfld.long 0x00 24. "  ENABLE_OD_PULLUP                     ,External open-drain pullup enable" "Disabled,Enabled"
bitfld.long 0x00 20.--23. "           CARD_VOLTAGE_B       ,Card regulator-B voltage setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. " CARD_VOLTAGE_A                      ,Card regulator-A voltage setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "               CEATA_DEVICE_INTERRUPT_STATUS        ,CE-ATA device interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 10. "           SEND_AUTO_STOP_CCSD  ,Send command completion signal disable" "Not sent,Sent"
newline
bitfld.long 0x00 9. " SEND_CCSD                           ,Send CCSD" "Not sent,Sent"
bitfld.long 0x00 8. "         ABORT_READ_DATA                      ,Abort read data" "No change,Reset data"
bitfld.long 0x00 7. "         SEND_IRQ_RESPONSE    ,Send IRQ response" "No change,Sent"
newline
bitfld.long 0x00 6. " READ_WAIT                           ,Read wait" "Cleared,Asserted"
bitfld.long 0x00 5. "         DMA_ENABLE                           ,DMA transfer mode enable" "Disabled,Enabled"
bitfld.long 0x00 4. "           INT_ENABLE           ,Global interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " DMA_RESET                           ,DMA reset" "No reset,Reset"
bitfld.long 0x00 1. "         FIFO_RESET                           ,FIFO reset" "No reset,Reset"
bitfld.long 0x00 0. "           CONTROLLER_RESET     ,DMA transfer mode enable" "No reset,Reset"
line.long 0x04 "PWREN,Power Enable Register"
bitfld.long 0x04 0. " POWER_ENABLE_0                      ,Power on/off switch for card" "Power off,Power on"
line.long 0x08 "CLKDIV,Clock Divider Register"
hexmask.long.byte 0x08 24.--31. 1. " CLK_DIVIDER3                        ,Clock divider-3 value"
hexmask.long.byte 0x08 16.--23. 1. "               CLK_DIVIDER2                         ,Clock divider-2 value"
hexmask.long.byte 0x08 8.--15. 1. "                 CLK_DIVIDER1         ,Clock divider-1 value"
newline
hexmask.long.byte 0x08 0.--7. 1. " CLK_DIVIDER0                        ,Clock divider-0 value"
hgroup.long 0x0C++0x03
hide.long 0x00 "CLKSRC,Clock Source Register"
group.long 0x10++0x1B
line.long 0x00 "CLKENA,Clock Enable Register"
bitfld.long 0x00 16. " CCLK_LOW_POWER_0                    ,Low-power control for SD card clock" "Non low power,Low power"
bitfld.long 0x00 0. "    CCLK_ENABLE_0                        ,Clock-enable control for SD card clock" "Disabled,Enabled"
line.long 0x04 "TMOUT,Timeout Register"
hexmask.long.tbyte 0x04 8.--31. 1. " DATA_TIMEOUT                        ,Value for card Data Read time-out"
hexmask.long.byte 0x04 0.--7. 1. "           RESPONSE_TIMEOUT                     ,Response time-out value"
line.long 0x08 "CTYPE,Card Type Register"
bitfld.long 0x08 16. " CARD_WIDTH1                         ,Indicates if card is 8-bit" "Non 8-bit,8-bit"
bitfld.long 0x08 0. "        CARD_WIDTH0                          ,Indicates if card is 1-bit or 4-bit" "1-bit,4-bit"
line.long 0x0C "BLKSIZ,Block Size Register"
hexmask.long.word 0x0C 0.--15. 1. " BLOCK_SIZE                          ,Block size"
line.long 0x10 "BYTCNT,Byte Count Register"
line.long 0x14 "INTMASK,Interrupt Mask Register"
bitfld.long 0x14 31. " SDIO_INT_MASK_CARD15                ,Mask SDIO interrupt 15" "Masked,Not masked"
bitfld.long 0x14 30. "       SDIO_INT_MASK_CARD14                 ,Mask SDIO interrupt 14" "Masked,Not masked"
bitfld.long 0x14 29. "         SDIO_INT_MASK_CARD13 ,Mask SDIO interrupt 13" "Masked,Not masked"
newline
bitfld.long 0x14 28. " SDIO_INT_MASK_CARD12                ,Mask SDIO interrupt 12" "Masked,Not masked"
bitfld.long 0x14 27. "       SDIO_INT_MASK_CARD11                 ,Mask SDIO interrupt 11" "Masked,Not masked"
bitfld.long 0x14 26. "         SDIO_INT_MASK_CARD10 ,Mask SDIO interrupt 10" "Masked,Not masked"
newline
bitfld.long 0x14 25. " SDIO_INT_MASK_CARD9                 ,Mask SDIO interrupt 9" "Masked,Not masked"
bitfld.long 0x14 24. "       SDIO_INT_MASK_CARD8                  ,Mask SDIO interrupt 8" "Masked,Not masked"
bitfld.long 0x14 23. "         SDIO_INT_MASK_CARD7  ,Mask SDIO interrupt 7" "Masked,Not masked"
newline
bitfld.long 0x14 22. " SDIO_INT_MASK_CARD6                 ,Mask SDIO interrupt 6" "Masked,Not masked"
bitfld.long 0x14 21. "       SDIO_INT_MASK_CARD5                  ,Mask SDIO interrupt 5" "Masked,Not masked"
bitfld.long 0x14 20. "         SDIO_INT_MASK_CARD4  ,Mask SDIO interrupt 4" "Masked,Not masked"
newline
bitfld.long 0x14 19. " SDIO_INT_MASK_CARD3                 ,Mask SDIO interrupt 3" "Masked,Not masked"
bitfld.long 0x14 18. "       SDIO_INT_MASK_CARD2                  ,Mask SDIO interrupt 2" "Masked,Not masked"
bitfld.long 0x14 17. "         SDIO_INT_MASK_CARD1  ,Mask SDIO interrupt 1" "Masked,Not masked"
newline
bitfld.long 0x14 16. " SDIO_INT_MASK_CARD0                 ,Mask SDIO interrupt 0" "Masked,Not masked"
bitfld.long 0x14 15. "       EBE_INT_MASK                         ,End-bit error / Write no CRC interrupt enable" "Masked,Not masked"
bitfld.long 0x14 14. "         ACD_INT_MASK         ,Auto command done interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 13. " SBE_BCI_INT_MASK                    ,Start bit error / Busy complete interrupt interrupt enable" "Masked,Not masked"
bitfld.long 0x14 12. "       HLE_INT_MASK                         ,Hardware locked write error interrupt enable" "Masked,Not masked"
bitfld.long 0x14 11. "         FRUN_INT_MASK        ,FIFO underrun / Overrun error interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 10. " HTO_INT_MASK                        ,Data starvation-by-host timeout / volt_switch_int interrupt enable" "Masked,Not masked"
bitfld.long 0x14 9. "       DRTO_INT_MASK                        ,Data read timeout interrupt enable" "Masked,Not masked"
bitfld.long 0x14 8. "         RTO_INT_MASK         ,Response timeout interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 7. " DCRC_INT_MASK                       ,Data CRC error interrupt enable" "Masked,Not masked"
bitfld.long 0x14 6. "       RCRC_INT_MASK                        ,Response CRC error interrupt enable" "Masked,Not masked"
bitfld.long 0x14 5. "         RXDR_INT_MASK        ,Receive FIFO data request interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 4. " TXDR_INT_MASK                       ,Transmit FIFO data request interrupt enable" "Masked,Not masked"
bitfld.long 0x14 3. "       DTO_INT_MASK                         ,Data transfer over interrupt enable" "Masked,Not masked"
bitfld.long 0x14 2. "         CMD_INT_MASK         ,Command done interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 1. " RE_INT_MASK                         ,Response error interrupt enable" "Masked,Not masked"
bitfld.long 0x14 0. "       CD_INT_MASK                          ,Card detect interrupt enable" "Masked,Not masked"
line.long 0x18 "CMDARG,Command Argument Register"
newline
group.long 0x2C++0x03
line.long 0x00 "CMD,Command Register"
bitfld.long 0x00 31. "  START_CMD          ,Start command" "Not started,Started"
bitfld.long 0x00 29. "             USE_HOLD_REG                ,Use hold register" "Bypassed,Not bypassed"
newline
bitfld.long 0x00 28. "  VOLT_SWITCH        ,Voltage switch bit" "Disabled,Enabled"
bitfld.long 0x00 27. "                BOOT_MODE                   ,Boot mode" "Mandatory,Alternate"
newline
bitfld.long 0x00 26. "  DISABLE_BOOT       ,Disable boot" "No,Yes"
bitfld.long 0x00 25. "                     EXPECT_BOOT_ACK             ,Expect boot acknowledge" "Not expected,Expected"
newline
bitfld.long 0x00 24. "  ENABLE_BOOT        ,Enable boot" "Disabled,Enabled"
bitfld.long 0x00 23. "                CCS_EXPECTED                ,CCS expected" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "  READ_CEATA_DEVICE  ,Read access to CE-ATA device" "No access,Access"
bitfld.long 0x00 21. "               UPDATE_CLOCK_REGISTERS_ONLY ,Update clock registers only" "Normal,Update"
newline
bitfld.long 0x00 16.--20. "  CARD_NUMBER        ,Card number in use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,?..."
bitfld.long 0x00 15. "                      SEND_INITIALIZATION         ,Send initialization" "Not sent,Sent"
newline
bitfld.long 0x00 14. "  STOP_ABORT_CMD     ,Stop or abort command" "Neither stop nor abort,Send or abort"
bitfld.long 0x00 13. "  WAIT_PRVDATA_COMPLETE       ,Wait for previous data transfer completion before sending command" "Send at once,Wait"
newline
bitfld.long 0x00 12. "  SEND_AUTO_STOP     ,Send stop command at the end of data transfer" "Not sent,Sent"
bitfld.long 0x00 11. "                TRANSFER_MODE               ,Transfer mode" "Block,Stream"
newline
bitfld.long 0x00 10. "  READ_WRITE         ,Card read/write" "Read,Write"
bitfld.long 0x00 9. "                   DATA_EXPECTED               ,Data expected" "Not expected,Expected"
newline
bitfld.long 0x00 8. "  CHECK_RESPONSE_CRC ,Check response CRC" "Not checked,Checked"
bitfld.long 0x00 7. "             RESPONSE_LENGTH             ,Response length" "Short,Long"
newline
bitfld.long 0x00 6. "  RESPONSE_EXPECT    ,Response expect" "Not expected,Expected"
bitfld.long 0x00 0.--5. "            CMD_INDEX                   ,Command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,?..."
newline
rgroup.long 0x30++0x03
line.long 0x00 "RESP0,Response Register 0"
rgroup.long 0x34++0x03
line.long 0x00 "RESP1,Response Register 1"
rgroup.long 0x38++0x03
line.long 0x00 "RESP2,Response Register 2"
rgroup.long 0x3C++0x03
line.long 0x00 "RESP3,Response Register 3"
rgroup.long 0x40++0x03
line.long 0x00 "MINTSTS,Masked Interrupt Status Register"
bitfld.long 0x00 31. " SDIO_INTERRUPT_CARD15               ,Interrupt from SDIO card 15" "Disabled,Enabled"
bitfld.long 0x00 30. "         SDIO_INTERRUPT_CARD14                ,Interrupt from SDIO card 14" "Disabled,Enabled"
newline
bitfld.long 0x00 29. " SDIO_INTERRUPT_CARD13               ,Interrupt from SDIO card 13" "Disabled,Enabled"
bitfld.long 0x00 28. "         SDIO_INTERRUPT_CARD12                ,Interrupt from SDIO card 12" "Disabled,Enabled"
newline
bitfld.long 0x00 27. " SDIO_INTERRUPT_CARD11               ,Interrupt from SDIO card 11" "Disabled,Enabled"
bitfld.long 0x00 26. "         SDIO_INTERRUPT_CARD10                ,Interrupt from SDIO card 10" "Disabled,Enabled"
newline
bitfld.long 0x00 25. " SDIO_INTERRUPT_CARD9                ,Interrupt from SDIO card 9" "Disabled,Enabled"
bitfld.long 0x00 24. "         SDIO_INTERRUPT_CARD8                 ,Interrupt from SDIO card 8" "Disabled,Enabled"
newline
bitfld.long 0x00 23. " SDIO_INTERRUPT_CARD7                ,Interrupt from SDIO card 7" "Disabled,Enabled"
bitfld.long 0x00 22. "         SDIO_INTERRUPT_CARD6                 ,Interrupt from SDIO card 6" "Disabled,Enabled"
newline
bitfld.long 0x00 21. " SDIO_INTERRUPT_CARD5                ,Interrupt from SDIO card 5" "Disabled,Enabled"
bitfld.long 0x00 20. "         SDIO_INTERRUPT_CARD4                 ,Interrupt from SDIO card 4" "Disabled,Enabled"
newline
bitfld.long 0x00 19. " SDIO_INTERRUPT_CARD3                ,Interrupt from SDIO card 3" "Disabled,Enabled"
bitfld.long 0x00 18. "         SDIO_INTERRUPT_CARD2                 ,Interrupt from SDIO card 2" "Disabled,Enabled"
newline
bitfld.long 0x00 17. " SDIO_INTERRUPT_CARD1                ,Interrupt from SDIO card 1" "Disabled,Enabled"
bitfld.long 0x00 16. "         SDIO_INTERRUPT_CARD0                 ,Interrupt from SDIO card 0" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " END_BIT_ERROR_INTERRUPT             ,End-bit error" "Disabled,Enabled"
bitfld.long 0x00 14. "         AUTO_COMMAND_DONE_INTERRUPT          ,Auto command done" "Disabled,Enabled"
newline
bitfld.long 0x00 13. " BUSY_COMPLETE_INTERRUPT_INTERRUPT   ,Start-bit error / Busy complete interrupt" "Disabled,Enabled"
bitfld.long 0x00 12. "         HARDWARE_LOCKED_WRITE_INTERRUPT      ,Hardware locked write error" "Disabled,Enabled"
newline
bitfld.long 0x00 11. " FIFO_UNDER_OVER_RUN_INTERRUPT       ,FIFO underrun/overrun error" "Disabled,Enabled"
bitfld.long 0x00 10. "         HOST_TIMEOUT_INTERRUPT               ,Data starvation by host timeout/Volt switch int" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " DATA_READ_TIMEOUT_INTERRUPT         ,Data read time-out" "Disabled,Enabled"
bitfld.long 0x00 8. "         RESPONSE_TIMEOUT_INTERRUPT           ,Response time-out" "Disabled,Enabled"
newline
bitfld.long 0x00 7. " DATA_CRC_ERROR_INTERRUPT            ,Data CRC error" "Disabled,Enabled"
bitfld.long 0x00 6. "         RESPONSE_CRC_ERROR_INTERRUPT         ,Response CRC error" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " RECEIVE_FIFO_DATA_REQUEST_INTERRUPT ,Receive FIFO data request" "Disabled,Enabled"
bitfld.long 0x00 4. "         TRANSMIT_RECEIVE_FIFO_DATA_INTERRUPT ,Transmit FIFO data request" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " DATA_TRANSFER_OVER_INTERRUPT        ,Data transfer over" "Disabled,Enabled"
bitfld.long 0x00 2. "         COMMAND_DONE_INTERRUPT               ,Command done" "Disabled,Enabled"
newline
bitfld.long 0x00 1. " RESPONSE_ERROR_INTERRUPT            ,Response error" "Disabled,Enabled"
bitfld.long 0x00 0. "         CARD_DETECT_INTERRUPT                ,Card detect" "Disabled,Enabled"
group.long 0x44++0x03
line.long 0x00 "RINTSTS,Raw Interrupt Status Register"
eventfld.long 0x00 31. " SDIO_INTERRUPT_CARD15               ,Interrupt from SDIO card 15" "No interrupt,Interrupt"
eventfld.long 0x00 30. "     SDIO_INTERRUPT_CARD14                ,Interrupt from SDIO card 14" "No interrupt,Interrupt"
newline
eventfld.long 0x00 29. " SDIO_INTERRUPT_CARD13               ,Interrupt from SDIO card 13" "No interrupt,Interrupt"
eventfld.long 0x00 28. "     SDIO_INTERRUPT_CARD12                ,Interrupt from SDIO card 12" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. " SDIO_INTERRUPT_CARD11               ,Interrupt from SDIO card 11" "No interrupt,Interrupt"
eventfld.long 0x00 26. "     SDIO_INTERRUPT_CARD10                ,Interrupt from SDIO card 10" "No interrupt,Interrupt"
newline
eventfld.long 0x00 25. " SDIO_INTERRUPT_CARD9                ,Interrupt from SDIO card 9" "No interrupt,Interrupt"
eventfld.long 0x00 24. "     SDIO_INTERRUPT_CARD8                 ,Interrupt from SDIO card 8" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. " SDIO_INTERRUPT_CARD7                ,Interrupt from SDIO card 7" "No interrupt,Interrupt"
eventfld.long 0x00 22. "     SDIO_INTERRUPT_CARD6                 ,Interrupt from SDIO card 6" "No interrupt,Interrupt"
newline
eventfld.long 0x00 21. " SDIO_INTERRUPT_CARD5                ,Interrupt from SDIO card 5" "No interrupt,Interrupt"
eventfld.long 0x00 20. "     SDIO_INTERRUPT_CARD4                 ,Interrupt from SDIO card 4" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. " SDIO_INTERRUPT_CARD3                ,Interrupt from SDIO card 3" "No interrupt,Interrupt"
eventfld.long 0x00 18. "     SDIO_INTERRUPT_CARD2                 ,Interrupt from SDIO card 2" "No interrupt,Interrupt"
newline
eventfld.long 0x00 17. " SDIO_INTERRUPT_CARD1                ,Interrupt from SDIO card 1" "No interrupt,Interrupt"
eventfld.long 0x00 16. "     SDIO_INTERRUPT_CARD0                 ,Interrupt from SDIO card 0" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. " END_BIT_ERROR_STATUS                ,End-bit error" "No interrupt,Interrupt"
eventfld.long 0x00 14. "     AUTO_COMMAND_DONE_STATUS             ,Auto command done" "No interrupt,Interrupt"
newline
eventfld.long 0x00 13. " BUSY_COMPLETE_STATUS                ,Start bit error / Busy complete status" "No interrupt,Interrupt"
eventfld.long 0x00 12. "     HARDWARE_LOCKED_WRITE_STATUS         ,Hardware locked write error" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. " FIFO_UNDER_OVER_RUN_STATUS          ,FIFO underrun/overrun error" "No interrupt,Interrupt"
eventfld.long 0x00 10. "     HOST_TIMEOUT_STATUS                  ,Data starvation by host timeout/Volt switch int" "No interrupt,Interrupt"
newline
eventfld.long 0x00 9. " DATA_READ_TIMEOUT_STATUS            ,Data read timeout" "No interrupt,Interrupt"
eventfld.long 0x00 8. "     RESPONSE_TIMEOUT_STATUS              ,Response timeout" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. " DATA_CRC_ERROR_STATUS               ,Data CRC error" "No interrupt,Interrupt"
eventfld.long 0x00 6. "     RESPONSE_CRC_ERROR_STATUS            ,Response CRC error" "No interrupt,Interrupt"
newline
eventfld.long 0x00 5. " RECEIVE_FIFO_DATA_REQUEST_STATUS    ,Receive FIFO data request" "No interrupt,Interrupt"
eventfld.long 0x00 4. "     TRANSMIT_RECEIVE_FIFO_DATA_STATUS    ,Transmit FIFO data request" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. " DATA_TRANSFER_OVER_STATUS           ,Data transfer over" "No interrupt,Interrupt"
eventfld.long 0x00 2. "     COMMAND_DONE_STATUS                  ,Command done" "No interrupt,Interrupt"
newline
eventfld.long 0x00 1. " RESPONSE_ERROR_STATUS               ,Response error" "No interrupt,Interrupt"
eventfld.long 0x00 0. "     CARD_DETECT_STATUS                   ,Card detect" "No interrupt,Interrupt"
rgroup.long 0x48++0x03
line.long 0x00 "STATUS,Status Register"
bitfld.long 0x00 31. " DMA_REQ                             ,DMA request signal state" "Not asserted,Asserted"
bitfld.long 0x00 30. "     DMA_ACK                              ,DMA acknowledge signal state" "Not asserted,Asserted"
hexmask.long.word 0x00 17.--29. 1. "       FIFO_COUNT           ,FIFO count number of filled locations in FIFO"
newline
bitfld.long 0x00 11.--16. " RESPONSE_INDEX                      ,Index of previous response including any auto-stop sent by core" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 10. "               DATA_STATE_MC_BUSY                   ,Data transmit or receive state-machine is busy" "Not busy,Busy"
bitfld.long 0x00 9. "           DATA_BUSY            ,Inverted version of raw selected card_data" "Not busy,Busy"
newline
bitfld.long 0x00 8. " DATA_3_STATUS                       ,Raw selected card_data" "Card not present,Card present"
bitfld.long 0x00 4.--7. " COMMAND_FSM_STATES                   ,Command FSM states" "Idle,Send init sequence,Tx cmd start bit,Tx cmd tx bit,Tx cmd index + arg,Tx cmd crc7,Tx cmd end bit,Rx resp start bit,Rx resp IRQ response,Rx resp tx bit,Rx resp cmd idx,Rx resp data,Rx resp crc7,Rx resp end bit,Cmd path wait NCC,Wait"
newline
bitfld.long 0x00 3. " FIFO_FULL                           ,FIFO is full status" "Not full,Full"
newline
bitfld.long 0x00 2. " FIFO_EMPTY                          ,FIFO is empty status" "Not empty,Empty"
bitfld.long 0x00 1. "        FIFO_TX_WATERMARK                    ,FIFO reached transmit watermark level" "Not reached,Reached"
bitfld.long 0x00 0. "        FIFO_RX_WATERMARK    ,FIFO reached receive watermark level" "Not reached,Reached"
group.long 0x4C++0x03
line.long 0x00 "FIFOTH,FIFO Threshold Watermark Register"
bitfld.long 0x00 28.--30. " DMA_MTS                             ,Burst size of multiple transaction" "1,4,8,16,32,64,128,256"
hexmask.long.word 0x00 16.--27. 1. "              RX_WMARK                             ,FIFO threshold watermark level when receiving data to card"
hexmask.long.word 0x00 0.--11. 1. "               TX_WMARK             ,FIFO threshold watermark level when transmitting data to card"
rgroup.long 0x50++0x07
line.long 0x00 "CDETECT,Card Detect Register"
bitfld.long 0x00 0. " CARD0_DETECT_N                      ,Card detect" "Detected,Not detected"
line.long 0x04 "WRTPRT,Write Protect Register"
bitfld.long 0x04 0. " WRITE_PROTECT_0                     ,Write protect" "Not protected,Protected"
group.long 0x58++0x03
line.long 0x00 "GPIO,General Purpose Input/Output Register"
hexmask.long.word 0x00 8.--23. 1. " GPO                                 ,GPO output value"
hexmask.long.byte 0x00 0.--7. 1. "             GPI                                  ,GPI input value"
rgroup.long 0x5C++0x07
line.long 0x00 "TCBCNT,Transferred CIU Card Byte Count Register"
line.long 0x04 "TBBCNT,Transferred Host to BIU-FIFO Byte Count Register"
group.long 0x64++0x07
line.long 0x00 "DEBNCE,Debounce Count Register"
hexmask.long.tbyte 0x00 0.--23. 1. " DEBOUNCE_COUNT                      ,Number of host clocks used by debounce filter logic"
line.long 0x04 "USRID,User ID Register"
rgroup.long 0x6C++0x07
line.long 0x00 "VERID,Version ID Register"
line.long 0x04 "HCON,Hardware Configuration Register"
bitfld.long 0x04 27. " ADDR_CONFIG                         ,Address configuration" "32-bit,64-bit"
bitfld.long 0x04 26. "           AREA_OPT                             ,Area Optimization" "Not optimized,Optimized"
bitfld.long 0x04 24.--25. "      NUM_CLK_DIC          ,Number of clock dividers" "0,1,2,3"
newline
bitfld.long 0x04 23. " FALSE_PATH                          ,Set clock false path" "Not set,Set"
bitfld.long 0x04 22. "          HOLD_REG                             ,Implement HOLD register" "Not implemented,Implemented"
bitfld.long 0x04 21. "    FIFO_RAM_IN          ,FIFO Ram Inside" "Outside,Inside"
newline
bitfld.long 0x04 18.--20. " GE_DMA_DATA_WIDTH                   ,Generic DMA data width" "16 bits,32 bits,64 bits,?..."
bitfld.long 0x04 16.--17. "          DMA_IF                               ,DMA interface" ",DW DMA,Generic DMA,Non DW DMA"
bitfld.long 0x04 10.--15. "        H_ADDR_WIDTH         ,H Address Width" ",,,,,,,,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits,32 bits,?..."
newline
bitfld.long 0x04 7.--9. " H_DATA_WIDTH                        ,H data width" "16 bits,32 bits,64 bits,?..."
bitfld.long 0x04 6. "          BUS_TYPE                             ,Bus type" "APB,AHB"
bitfld.long 0x04 1.--5. "                NUM_CARD             ,Number of Cards" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x04 0. " CARD_TYPE                           ,Card type" "MMC only,SD MMC"
group.long 0x74++0x07
line.long 0x00 "UHS_REG,UHS-1 Register"
bitfld.long 0x00 31. " DDR_REG_15                          ,DDR mode 15" "Disabled,Enabled"
bitfld.long 0x00 30. "         DDR_REG_14                           ,DDR mode 14" "Disabled,Enabled"
bitfld.long 0x00 29. "           DDR_REG_13           ,DDR mode 13" "Disabled,Enabled"
newline
bitfld.long 0x00 28. " DDR_REG_12                          ,DDR mode 12" "Disabled,Enabled"
bitfld.long 0x00 27. "         DDR_REG_11                           ,DDR mode 11" "Disabled,Enabled"
bitfld.long 0x00 26. "           DDR_REG_10           ,DDR mode 10" "Disabled,Enabled"
newline
bitfld.long 0x00 25. " DDR_REG_9                           ,DDR mode 9" "Disabled,Enabled"
bitfld.long 0x00 24. "         DDR_REG_8                            ,DDR mode 8" "Disabled,Enabled"
bitfld.long 0x00 23. "           DDR_REG_7            ,DDR mode 7" "Disabled,Enabled"
newline
bitfld.long 0x00 22. " DDR_REG_6                           ,DDR mode 6" "Disabled,Enabled"
bitfld.long 0x00 21. "         DDR_REG_5                            ,DDR mode 5" "Disabled,Enabled"
bitfld.long 0x00 20. "           DDR_REG_4            ,DDR mode 4" "Disabled,Enabled"
newline
bitfld.long 0x00 19. " DDR_REG_3                           ,DDR mode 3" "Disabled,Enabled"
bitfld.long 0x00 18. "         DDR_REG_2                            ,DDR mode 2" "Disabled,Enabled"
bitfld.long 0x00 17. "           DDR_REG_1            ,DDR mode 1" "Disabled,Enabled"
newline
bitfld.long 0x00 16. " DDR_REG_0                           ,DDR mode 0" "Disabled,Enabled"
bitfld.long 0x00 15. "         VOLT_REG_15                          ,High voltage mode 15" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 14. "           VOLT_REG_14          ,High voltage mode 14" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 13. " VOLT_REG_13                         ,High voltage mode 13" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 12. "         VOLT_REG_12                          ,High voltage mode 12" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 11. "           VOLT_REG_11          ,High voltage mode 11" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 10. " VOLT_REG_10                         ,High voltage mode 10" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 9. "         VOLT_REG_9                           ,High voltage mode 9" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 8. "           VOLT_REG_8           ,High voltage mode 8" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 7. " VOLT_REG_7                          ,High voltage mode 7" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 6. "         VOLT_REG_6                           ,High voltage mode 6" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 5. "           VOLT_REG_5           ,High voltage mode 5" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 4. " VOLT_REG_4                          ,High voltage mode 4" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 3. "         VOLT_REG_3                           ,High voltage mode 3" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 2. "           VOLT_REG_2           ,High voltage mode 2" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 1. " VOLT_REG_1                          ,High voltage mode 1" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 0. "         VOLT_REG_0                           ,High voltage mode 0" "3.3V Vdd,1.8V Vdd"
line.long 0x04 "RST_N,H/W Reset"
bitfld.long 0x04 0. " CARD0_RESET                         ,Hardware reset" "Reset,Active mode"
group.long 0x80++0x03
line.long 0x00 "BMOD,Bus Mode Register"
rbitfld.long 0x00 8.--10. " PBL                                 ,Programmable burst length" "1,4,8,16,32,64,128,256"
bitfld.long 0x00 7. "              DE                                   ,IDMAC enable" "Disabled,Enabled"
bitfld.long 0x00 2.--6. "           DSL                  ,Descriptor skip length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1. " FB                                  ,Fixed burst" "No fixed,Fixed"
bitfld.long 0x00 0. "         SWR                                  ,Software reset" "No reset,Reset"
wgroup.long 0x84++0x03
line.long 0x00 "PLDMND,Poll Demand Register"
group.long 0x88++0x0B
line.long 0x00 "DBADDR,Descriptor List Base Address Register"
line.long 0x04 "IDSTS,Internal DMAC Status Register"
rbitfld.long 0x04 13.--16. " FSM                                 ,DMAC state machine present state" "DMA_IDLE,DMA_SUSPEND,DESC_RD,DESC_CHK,DMA_RD_REQ_WAIT,DMA_WR_REQ_WAIT,DMA_RD,DMA_WR,DESC_CLOSE,?..."
rbitfld.long 0x04 10.--12. "  EB                                   ,Error bits (host abort)" ",During transmission,During reception,?..."
newline
eventfld.long 0x04 9. " AIS                                 ,Abnormal interrupt summary" "No interrupt,Interrupt"
newline
eventfld.long 0x04 8. " NIS                                 ,Normal interrupt summary" "No interrupt,Interrupt"
eventfld.long 0x04 5. "     CES                                  ,Card error summary" "No error,Error"
eventfld.long 0x04 4. "           DU                   ,Descriptor unavailable interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x04 2. " FBE                                 ,Fatal Bus Error interrupt" "No interrupt,Interrupt"
eventfld.long 0x04 1. "     RI                                   ,Receive interrupt" "No interrupt,Interrupt"
eventfld.long 0x04 0. "       TI                   ,Transmit interrupt" "No interrupt,Interrupt"
line.long 0x08 "IDINTEN,Internal DMAC Interrupt Enable Register"
bitfld.long 0x08 9. " AI                                  ,Abnormal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x08 8. "         NI                                   ,Normal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x08 5. "           CES                  ,Card error summary interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 4. " DU                                  ,Descriptor unavailable interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 2. "         FBE                                  ,Fatal bus error enable" "Disabled,Enabled"
bitfld.long 0x08 1. "           RI                   ,Receive interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. " TI                                  ,Transmit interrupt enable" "Disabled,Enabled"
rgroup.long 0x94++0x07
line.long 0x00 "DSCADDR,Current Host Descriptor Address Register"
line.long 0x04 "BUFADDR,Current Buffer Descriptor Address Register"
group.long 0x100++0x0B
line.long 0x00 "CARDTHRCTL,Card Threshold Control Register"
hexmask.long.word 0x00 16.--28. 1. " CARDRDTHRESHOLD                     ,Card read threshold size"
rbitfld.long 0x00 2. "             CARDWRTHREN                          ,Card write threshold enable" "Disabled,Enabled"
bitfld.long 0x00 1. "           BUSY_CLR_INT_EN      ,Busy clear interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " CARDRDTHREN                         ,Card read threshold enable" "Disabled,Enabled"
line.long 0x04 "BACK_END_POWER_R,Back End Power Register"
bitfld.long 0x04 15. " BACK_END_POWER_15                   ,Back end power 15" "Off,Supplied"
bitfld.long 0x04 14. "         BACK_END_POWER_14                    ,Back end power 14" "Off,Supplied"
bitfld.long 0x04 13. "           BACK_END_POWER_13    ,Back end power 13" "Off,Supplied"
newline
bitfld.long 0x04 12. " BACK_END_POWER_12                   ,Back end power 12" "Off,Supplied"
bitfld.long 0x04 11. "         BACK_END_POWER_11                    ,Back end power 11" "Off,Supplied"
bitfld.long 0x04 10. "           BACK_END_POWER_10    ,Back end power 10" "Off,Supplied"
newline
bitfld.long 0x04 9. " BACK_END_POWER_9                    ,Back end power 9" "Off,Supplied"
bitfld.long 0x04 8. "         BACK_END_POWER_8                     ,Back end power 8" "Off,Supplied"
bitfld.long 0x04 7. "           BACK_END_POWER_7     ,Back end power 7" "Off,Supplied"
newline
bitfld.long 0x04 6. " BACK_END_POWER_6                    ,Back end power 6" "Off,Supplied"
bitfld.long 0x04 5. "         BACK_END_POWER_5                     ,Back end power 5" "Off,Supplied"
bitfld.long 0x04 4. "           BACK_END_POWER_4     ,Back end power 4" "Off,Supplied"
newline
bitfld.long 0x04 3. " BACK_END_POWER_3                    ,Back end power 3" "Off,Supplied"
bitfld.long 0x04 2. "         BACK_END_POWER_2                     ,Back end power 2" "Off,Supplied"
bitfld.long 0x04 1. "           BACK_END_POWER_1     ,Back end power 1" "Off,Supplied"
newline
bitfld.long 0x04 0. " BACK_END_POWER_0                    ,Back end power 0" "Off,Supplied"
line.long 0x08 "UHS_REG_EXT,UHS Register Extention"
bitfld.long 0x08 30.--31. " EXT_CLK_MUX_CTRL                    ,Input clock control for cclk_in" "0,1,2,3"
hexmask.long.word 0x08 23.--29. 1. "                CLK_DRV_PHASE_CTRL                   ,Control for amount of phase shift on cclk_in_drv clock"
hexmask.long.byte 0x08 16.--22. 1. "               CLK_SMPL_PHASE_CTRL  ,Control for amount of phase shift on cclk_in_sample clock"
newline
bitfld.long 0x08 15. " MMC_VOLT_REG_15                     ,Support for 1.2V bit 15" "Not supported,Supported"
bitfld.long 0x08 14. "    MMC_VOLT_REG_14                      ,Support for 1.2V bit 14" "Not supported,Supported"
bitfld.long 0x08 13. "      MMC_VOLT_REG_13      ,Support for 1.2V bit 13" "Not supported,Supported"
newline
bitfld.long 0x08 12. " MMC_VOLT_REG_12                     ,Support for 1.2V bit 12" "Not supported,Supported"
bitfld.long 0x08 11. "    MMC_VOLT_REG_11                      ,Support for 1.2V bit 11" "Not supported,Supported"
bitfld.long 0x08 10. "      MMC_VOLT_REG_10      ,Support for 1.2V bit 10" "Not supported,Supported"
newline
bitfld.long 0x08 9. " MMC_VOLT_REG_9                      ,Support for 1.2V bit 9" "Not supported,Supported"
bitfld.long 0x08 8. "    MMC_VOLT_REG_8                       ,Support for 1.2V bit 8" "Not supported,Supported"
bitfld.long 0x08 7. "      MMC_VOLT_REG_7       ,Support for 1.2V bit 7" "Not supported,Supported"
newline
bitfld.long 0x08 6. " MMC_VOLT_REG_6                      ,Support for 1.2V bit 6" "Not supported,Supported"
bitfld.long 0x08 5. "    MMC_VOLT_REG_5                       ,Support for 1.2V bit 5" "Not supported,Supported"
bitfld.long 0x08 4. "      MMC_VOLT_REG_4       ,Support for 1.2V bit 4" "Not supported,Supported"
newline
bitfld.long 0x08 3. " MMC_VOLT_REG_3                      ,Support for 1.2V bit 3" "Not supported,Supported"
bitfld.long 0x08 2. "    MMC_VOLT_REG_2                       ,Support for 1.2V bit 2" "Not supported,Supported"
bitfld.long 0x08 1. "      MMC_VOLT_REG_1       ,Support for 1.2V bit 1" "Not supported,Supported"
newline
bitfld.long 0x08 0. " MMC_VOLT_REG_0                      ,Support for 1.2V bit 0" "Not supported,Supported"
if (((per.l(ad:0xFF8D1000+0x10C))&0x80000000)==0x80000000)
group.long 0x10C++0x03
line.long 0x00 "EMMC_DDR_REG,EMMC DDR Register"
rbitfld.long 0x00 31. " HS400_MODE                          ,HS400 mode enable" "Disabled,Enabled"
else
group.long 0x10C++0x03
line.long 0x00 "EMMC_DDR_REG,EMMC DDR Register"
rbitfld.long 0x00 31. " HS400_MODE                          ,HS400 mode enable" "Disabled,Enabled"
bitfld.long 0x00 0. "         HALF_START_BIT_0                     ,Start bit detection control enable" "Disabled,Enabled"
endif
group.long 0x110++0x03
line.long 0x00 "ENABLE_SHIFT,Enable Phase Shift Register"
bitfld.long 0x00 0.--1. " ENABLE_SHIFT_CARD0                  ,Phase shift amount control" "Default,Next posedge,Next negedge,?..."
newline
hgroup.long 0x200++0x03
hide.long 0x00 "DATA,DATA FIFO Access"
in
width 0x0B
tree.end
tree "SDM QSPI"
base ad:0xFF8D2000
width 19.
group.long 0x00++0x03
line.long 0x00 "CFG,QSPI Configuration Register"
rbitfld.long 0x00 31. "  IDLE                 ,Serial interface and QSPI pipeline is IDLE" "Not idle,Idle"
bitfld.long 0x00 19.--22. "             BAUDDIV        ,Master mode baud rate divisor" "Div 2,Div 4,Div 6,Div 8,Div 10,Div 12,Div 14,Div 16,Div 18,Div 20,Div 22,Div 24,Div 26,Div 28,Div 30,Div 32"
bitfld.long 0x00 18. "                ENTERXIPIMM    ,Enter XIP mode immediately" "Disabled,Enabled"
newline
bitfld.long 0x00 17. "  ENTERXIPEXTRD        ,Enter XIP mode on next READ" "Disabled,Enabled"
bitfld.long 0x00 16. "             ENAHBREMAP     ,Enable AHB address re-mapping" "Disabled,Enabled"
bitfld.long 0x00 15. "              ENDMA          ,DMA handshaking logic enable" "Disabled,Enabled"
newline
bitfld.long 0x00 14. "  WP                   ,Write protect flash pin" "Disabled,Enabled"
bitfld.long 0x00 10.--13. "             PERCSLINES     ,Peripheral chip select line output decode type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 9. "                    PERSELDEC      ,Peripheral select decode" "qspi_n_ss_out[3:0],External 4-to-16"
newline
bitfld.long 0x00 8. "  ENLEGACYIP           ,Legacy IP mode enable" "Disabled,Enabled"
bitfld.long 0x00 7. "             ENDIRACC       ,Enable direct access controller" "Disabled,Enabled"
bitfld.long 0x00 2. "              SELCLKPHASE    ,Select clock phase" "Activated,Not activated"
newline
bitfld.long 0x00 1. "  SELCLKPOL            ,Clock polarity" "High,Low"
bitfld.long 0x00 0. "                 EN             ,QSPI enable" "Disabled,Enabled"
group.long 0x04++0x27
line.long 0x00 "DEVRD,Device Read Instruction Configuration Register"
bitfld.long 0x00 24.--28. "  DUMMYRDCLKS          ,Dummy read clock cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "                   ENMODEBITS     ,Mode bits order" "No order,Follow address bytes"
bitfld.long 0x00 16.--17. "  DATAWIDTH      ,Data transfer width" "Single,Dual,Quad,?..."
newline
bitfld.long 0x00 12.--13. "  ADDRWIDTH            ,Address transfer width" "Single,Dual,Quad,?..."
bitfld.long 0x00 8.--9. "               INSTWIDTH      ,Instruction transfer width" "Single,Dual,Quad,?..."
hexmask.long.byte 0x00 0.--7. 1. "                RDOPCODE       ,Read opcode in non-XIP mode"
line.long 0x04 "DEVWR,Device Write Instruction Configuration Register"
bitfld.long 0x04 24.--28. "  DUMMYWRCLKS          ,Dummy write clock cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x04 16.--17. "                   DATAWIDTH      ,Data transfer width" "Single,Dual,Quad,?..."
bitfld.long 0x04 12.--13. "                ADDRWIDTH      ,Address transfer width" "Single,Dual,Quad,?..."
newline
hexmask.long.byte 0x04 0.--7. 1. "  WROPCODE             ,Write opcode"
line.long 0x08 "DELAY,QSPI Device Delay Register"
hexmask.long.byte 0x08 24.--31. 1. "  NSS                  ,Clock delay for chip select deassert"
hexmask.long.byte 0x08 16.--23. 1. "                   BTWN           ,Clock delay for chip select deactivation"
hexmask.long.byte 0x08 8.--15. 1. "                    AFTER          ,Clock delay for last transaction bit"
newline
hexmask.long.byte 0x08 0.--7. 1. "  INIT                 ,Clock delay between first bit transfer and setting n_ss_out low"
line.long 0x0C "RDDATACAP,Read Data Capture Register"
bitfld.long 0x0C 1.--4. "  DELAY                ,Read delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x0C 0. "                   BYP            ,Bypass the adapted loopback clock circuit" "Bypassed,Not bypassed"
line.long 0x10 "DEVSZ,Device Size Configuration Register"
bitfld.long 0x10 16.--20. "  BYTESPERSUBSECTOR    ,Number of bytes per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.long.word 0x10 4.--15. 1. "  BYTESPERDEVICEPAGE   ,Number of bytes per device page"
newline
bitfld.long 0x10 0.--3. "  NUMADDRBYTES         ,Number of address bytes" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
line.long 0x14 "SRAMPART,SRAM Partition Configuration Register"
hexmask.long.word 0x14 0.--9. 1. "  ADDR                 ,Indirect read partition size"
line.long 0x18 "INDADDRTRIG,Indirect AHB Address Trigger Register"
line.long 0x1C "DMAPER,DMA Peripheral Configuration Register"
bitfld.long 0x1C 8.--11. "  NUMBURSTREQBYTES     ,Number of burst bytes" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
newline
bitfld.long 0x1C 0.--3. "  NUMSGLREQBYTES       ,Number of single bytes" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
line.long 0x20 "REMAPADRR,Remap Address Register"
line.long 0x24 "MODEBIT,Mode Bit Configuration Register"
hexmask.long.byte 0x24 0.--7. 1. "  MODE                 ,Mode"
rgroup.long 0x2C++0x03
line.long 0x00 "SRAMFILL,SRAM Fill Register"
hexmask.long.word 0x00 16.--31. 1. "  INDWRPART            ,SRAM fill indirect write partition"
hexmask.long.word 0x00 0.--15. 1. "                 INDRDPART      ,SRAM fill indirect read partition"
group.long 0x30++0x07
line.long 0x00 "TXTRESH,TX Threshold Register"
bitfld.long 0x00 0.--3. "  LEVEL                ,Defines the level at which the small RX FIFO not full interrupt is generated" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "RXTRESH,RX Threshold Register"
bitfld.long 0x04 0.--3. "  LEVEL                ,Defines the level at which the small TX FIFO not full interrupt is generated" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x40++0x07
line.long 0x00 "IRQSTAT,Interrupt Status Register"
eventfld.long 0x00 12. "  INDSRAMFULL          ,Indirect read partition full" "Not full,Full"
eventfld.long 0x00 11. "             RXFULL         ,Receive FIFO full" "Not full,Full"
eventfld.long 0x00 10. "              RXTHRESHCMP    ,Receive FIFO threshold exceeded" "No interrupt,Interrupt"
newline
eventfld.long 0x00 9. "  TXFULL               ,Transmit FIFO full" "Not full,Full"
eventfld.long 0x00 8. "             TXTRESHCMP     ,Transmit FIFO threshold not exceeded" "No interrupt,Interrupt"
eventfld.long 0x00 7. "          RXOVER         ,Receive overflow" "No interrupt,Interrupt"
newline
eventfld.long 0x00 6. "  INDXFRLVL            ,Transfer watermark level reached" "Not level reached,Reached"
eventfld.long 0x00 5. "    ILLEGALACC     ,Illegal AHB access detected" "Not detected,Detected"
eventfld.long 0x00 4. "          PROTWRATTEMPT  ,Protected area write attempt" "Not protected,Protected"
newline
eventfld.long 0x00 3. "  INDRDREJECT          ,Indirect read reject" "No interrupt,Interrupt"
eventfld.long 0x00 2. "         INDOPDONE      ,Indirect operation completed" "Not completed,Completed"
eventfld.long 0x00 1. "         UNDERFLOWDET   ,Underflow detected" "Not detected,Detected"
newline
eventfld.long 0x00 0. "  MODE_M_FAIL_FLD      ,Mode M failure" "Not occurred,Occurred"
line.long 0x04 "IRQMASK,Interrupt Mask Register"
bitfld.long 0x04 12. "  INDSRAMFULL          ,Indirect read partition full mask" "Masked,Not masked"
bitfld.long 0x04 11. "           RXFULL         ,Receive FIFO full mask" "Masked,Not masked"
bitfld.long 0x04 10. "            RXTRESHCMP     ,Receive FIFO threshold exceeded mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. "  TXFULL               ,Transmit FIFO full mask" "Masked,Not masked"
bitfld.long 0x04 8. "           TXTRESHCMP     ,Transmit FIFO threshold not exceeded mask" "Masked,Not masked"
bitfld.long 0x04 7. "            RXOVER         ,Receive overflow mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. "  INDXFRLVL            ,Transfer watermark level reached mask" "Masked,Not masked"
bitfld.long 0x04 5. "           ILLEGALACC     ,Illegal AHB access detected mask" "Masked,Not masked"
bitfld.long 0x04 4. "            PROTWRATTEMPT  ,Protected area write attempt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. "  INDRDREJECT          ,Indirect read reject mask" "Masked,Not masked"
bitfld.long 0x04 2. "           INDOPDONE      ,Indirect operation completed mask" "Masked,Not masked"
bitfld.long 0x04 1. "            UNDERFLOWDET   ,Underflow detected mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. "  MODE_M_FAIL_MASK_FLD ,Mode M fail mask field" "Masked,Not masked"
group.long 0x50++0x0B
line.long 0x00 "LOWWRPROT,Lower Write Protection Register"
line.long 0x04 "UPPWRPROT,Upper Write Protection Register"
line.long 0x08 "WRPROT,Write Protection Register"
bitfld.long 0x08 1. "  EN                   ,Write protection region enable bit" "Disabled,Enabled"
bitfld.long 0x08 0. "             INV            ,Write protection region inversion bit" "Disabled,Enabled"
group.long 0x60++0x1F
line.long 0x00 "INDRD,Indirect Read Transfer Register"
rbitfld.long 0x00 6.--7. "  NUM_IND_OPS_DONE     ,Completed indirect operations" "0,1,2,3"
newline
eventfld.long 0x00 5. "  IND_OPS_DONE_STATUS  ,Indirect completion status" "Not completed,Completed"
newline
rbitfld.long 0x00 4. "  RD_QUEUED            ,Queued indirect read operations" "Not queued,Queued"
newline
eventfld.long 0x00 3. "  SRAM_FULL            ,SRAM full" "Not full,Full"
rbitfld.long 0x00 2. "             RD_STATUS      ,Indirect read operation status" "Not in progress,In progress"
bitfld.long 0x00 1. "       CANCEL         ,Cancel indirect read operation" "Not canceled,Canceled"
newline
bitfld.long 0x00 0. "  START                ,Start indirect read operation" "Disabled,Enabled"
line.long 0x04 "INDRDWATER,Indirect Read Transfer Watermark Register"
line.long 0x08 "INDRDSTADDR,Indirect Read Transfer Start Address Register"
line.long 0x0C "INDRDCNT,Indirect Read Transfer Number Bytes Register"
line.long 0x10 "INDWR,Indirect Write Transfer Register"
rbitfld.long 0x10 6.--7. "  INDCNT               ,Completed indirect operations" "0,1,2,3"
eventfld.long 0x10 5. "                    INDDONE        ,Indirect completion status" "Not completed,Completed"
rbitfld.long 0x10 4. "         RDQUEUED       ,Queued indirect write operations" "Not queued,Queued"
newline
rbitfld.long 0x10 2. "  RDSTAT               ,Indirect write operation status" "Not in progress,In progress"
bitfld.long 0x10 1. "      CANCEL         ,Cancel indirect write operation" "Not canceled,Canceled"
newline
bitfld.long 0x10 0. "  START                ,Start indirect write operation" "Disabled,Enabled"
line.long 0x14 "INDWRWATER,Indirect Write Transfer Watermark Register"
line.long 0x18 "INDWRSTADDR,Indirect Write Transfer Start Address Register"
line.long 0x1C "INDWRCNT,Indirect Write Transfer Number Bytes Register"
group.long 0x90++0x07
line.long 0x00 "FLASHCMD,Flash Command Register"
hexmask.long.byte 0x00 24.--31. 1. "  CMDOPCODE            ,Command opcode"
bitfld.long 0x00 23. "                   ENRDDATA       ,Command opcode field requires read data bytes to be received from the device" "No action,Required read data"
bitfld.long 0x00 20.--22. "    NUMRDDATABYTES ,Number of read data bytes" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 19. "  ENCMDADDR            ,Command in bits 31:24 requires address" "No Action,Required address"
bitfld.long 0x00 18. "     ENMODEBIT      ,Defines in the Mode Bit Configuration register are sent following the address bytes" "No action,Sent"
bitfld.long 0x00 16.--17. "             NUMADDRBYTES   ,Number of address bytes" "1,2,3,4"
newline
bitfld.long 0x00 15. "  ENWRDATA             ,Requires write data bytes to be sent to the device" "No Action,Required write data"
bitfld.long 0x00 12.--14. "  NUMWRDATABYTES ,Number of write data bytes" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 7.--11. "                     NUMDUMMYBYTES  ,Number of dummy bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
rbitfld.long 0x00 1. "  CMDEXECSTAT          ,Command execution status" "Not executed,Executed"
bitfld.long 0x00 0. "         ESECCMD        ,Execute command" "No action,Executed"
line.long 0x04 "FLASHCMDADDR,Flash Command Address Register"
group.long 0xA0++0x0F
line.long 0x00 "FLASHCMDDRDDATALO,Flash Command Read Data Register (Lower)"
line.long 0x04 "FLASHCMDDRDDATAUP,Flash Command Read Data Register (Upper)"
line.long 0x08 "FLASHCMDWRDDATALO,Flash Command Write Data Register (Lower)"
line.long 0x0C "FLASHCMDWRDDATAUP,Flash Command Write Data Register (Upper)"
rgroup.long 0xFC++0x03
line.long 0x00 "MODULEID,Module ID Register"
hexmask.long 0x00 0.--24. 1. "  VALUE                ,Module ID number"
base (ad:0xFF900000)
group.long 0x00++0x03
line.long 0x00 "QSPIDATA,QSPI Data Address Map"
button "Data" "d (ad:0xFF900000)--(ad:0xFF900000+0xFFFFF) /long"
width 0x0B
tree.end
tree.end
tree "RESET_MGR (Reset Manager)"
base ad:0xFFD11000
width 19.
group.long 0x00++0x03
line.long 0x00 "STAT,Reset Status Register"
bitfld.long 0x00 25. " CSDAPRST          ,CS DAP block reset" "No reset,Reset"
bitfld.long 0x00 24. "          DEBUGRST          ,Debug reset" "No reset,Reset"
bitfld.long 0x00 19. "          L4WD3RST        ,L4 Watchdog3 triggered a hardware sequenced warm reset" "No reset,Reset"
bitfld.long 0x00 18. "          L4WD2RST      ,L4 Watchdog2 triggered a hardware sequenced warm reset" "No reset,Reset"
newline
bitfld.long 0x00 17. " L4WD1RST          ,L4 Watchdog1 triggered a hardware sequenced warm reset" "No reset,Reset"
bitfld.long 0x00 16. "          L4WD0RST          ,L4 Watchdog0 triggered a hardware sequenced warm reset" "No reset,Reset"
bitfld.long 0x00 11. "          MPU3RST         ,MPU3 triggered a hardware sequenced warm reset" "No reset,Reset"
bitfld.long 0x00 10. "          MPU2RST       ,MPU2 triggered a hardware sequenced warm reset" "No reset,Reset"
newline
bitfld.long 0x00 9. " MPU1RST           ,MPU1 triggered a hardware sequenced warm reset" "No reset,Reset"
bitfld.long 0x00 8. "          MPU0RST           ,MPU0 triggered a hardware sequenced warm reset" "No reset,Reset"
bitfld.long 0x00 2. "          SDMLASTPORRST   ,SDM triggered last por reset" "No reset,Reset"
bitfld.long 0x00 1. "          SDMWARMRST    ,SDM triggered warm reset" "No reset,Reset"
newline
bitfld.long 0x00 0. " SDMCOLDRST        ,SDM triggered cold reset" "No reset,Reset"
group.long 0x08++0x03
line.long 0x00 "MISCSTAT,Timeout Status Register"
bitfld.long 0x00 16. " L3NOCDBGTIMEOUT   ,Request to the NOC before starting a hardware sequenced warm/watchdog reset timed-out" "Not timed-out,Timed-out"
bitfld.long 0x00 8. "     MPUL2FLUSHTIMEOUT ,Handshake request to L2 Flush timed-out" "Not timed-out,Timed-out"
bitfld.long 0x00 3. "     ETRSTALLTIMEOUT ,Request to the ETR (Embedded Trace Router) to stall its AXI master port before starting a hardware sequenced warm/watchdog reset timed-out" "Not timed-out,Timed-out"
bitfld.long 0x00 2. "     FPGAHSTIMEOUT ,Handshake request to FPGA before starting a hardware sequenced warm/watchdog reset timed-out" "Not timed-out,Timed-out"
newline
bitfld.long 0x00 0. " SDRSELFREFTIMEOUT ,Handshake request to the SDRAM Controller Subsystem timed-out" "Not timed-out,Timed-out"
group.long 0x10++0x1F
line.long 0x00 "HDSKEN,Handshake Enable Register"
bitfld.long 0x00 17. " DEBUG_L3NOC       ,This field controls whether to perform handshake with L3 NOC before asserting the CSDAP_RST or/and DBG_RST" "No handshake,Handshake"
bitfld.long 0x00 16. "      L3NOC_DBG         ,This field controls whether to perform handshake with L3 NOC before issuing a reset" "No handshake,Handshake"
bitfld.long 0x00 8. "      L2FLUSHEN       ,This field controls whether the L2 cache should be flushed before the L2 cache is reset by a watchdog reset or a software-requested L2 cache reset" "Not flushed,Flushed"
bitfld.long 0x00 3. "       ETRSTALLEN    ,Software writes this field 1 to request to the ETR that it stalls its AXI master to the L3 Interconnect" "No handshake,Handshake"
newline
bitfld.long 0x00 2. " FPGAHSEN          ,This field controls whether to perform handshake with FPGA before issuing a reset" "No handshake,Handshake"
bitfld.long 0x00 0. "      SDRSELFREFEN      ,This field controls whether to perform handshake with the SDRAM memory interface before issuing a reset"  "No handshake,Handshake"
line.long 0x04 "HDSKREQ,Handshake Request Register"
bitfld.long 0x04 5. " DEBUG_L3NOC_REQ   ,Software writes this field 1 to initiate a handshake request to L3 NOC" "No request,Request"
bitfld.long 0x04 4. "        L3NOC_DBG_REQ     ,Software writes this field 1 to initiate a handshake request to L3 NOC" "No request,Request"
bitfld.long 0x04 3. "        ETRSTALLREQ     ,Software sets bit field to 1 to ask the ETR to that stall its AXI master to the L3 Interconnect" "0,1"
bitfld.long 0x04 2. "                 FPGAHSREQ     ,Software writes this field 1 to initiate a handshake request to FPGA" "No request,Request"
newline
bitfld.long 0x04 0. " SDRSELFREFREQ     ,Software writes this field 1 to request that the SDRAM Controller Subsystem to stop accepting any new transactions and allows all outstanding transactions to drain" "No request,Request"
line.long 0x08 "HDSKACK,Handshake Acknowledge Register"
bitfld.long 0x08 5. " DEBUG_L3NOC_ACK   ,This field indicates that L3NOC handshake acknowledge has been received by Reset Manager" "Not acknowledged,Acknowledged"
bitfld.long 0x08 4. "  L3NOC_DBG_ACK     ,This field indicates that L3NOC handshake acknowledge has been received by Reset Manager" "Not acknowledged,Acknowledged"
bitfld.long 0x08 3. "  ETRSTALLACK     ,This is the acknowledge for a ETR AXI master stall initiated as a part of the ETR handshake" "Not acknowledged,Acknowledged"
bitfld.long 0x08 2. "  FPGAHSACK     ,This is the acknowledge that the FPGA handshake acknowledge has been received by Reset Manager" "Not acknowledged,Acknowledged"
newline
bitfld.long 0x08 0. " SDRSELFREFACK     ,This is the acknowledge that SDRAM handshake acknowledge has been received by Reset Manager" "Not acknowledged,Acknowledged"
line.long 0x0C "HDSKSTALL,ETR Stall Status Register"
bitfld.long 0x0C 0. " ETRSTALLWARMRST   ,Indicate that the stall of the ETR AXI master" "Not stalled,Stalled"
line.long 0x10 "MPUMODRST,MPU Module Reset Register"
bitfld.long 0x10 3. " CORE3             ,Resets ncorereset port of CPU3" "No reset,Reset"
bitfld.long 0x10 2. "          CORE2             ,Resets ncorereset port of CPU3" "No reset,Reset"
bitfld.long 0x10 1. "          CORE1           ,Resets ncorereset port of CPU3" "No reset,Reset"
bitfld.long 0x10 0. "          CORE0         ,Resets ncorereset port of CPU3" "No reset,Reset"
line.long 0x14 "PER0MODRST,Peripheral 0 Module Reset Register"
bitfld.long 0x14 31. " DMAIF7            ,Resets DMA channel 7 interface adapter between FPGA Fabric and HPS DMA controller" "No reset,Reset"
bitfld.long 0x14 30. "          DMAIF6            ,Resets DMA channel 6 interface adapter between FPGA Fabric and HPS DMA controller" "No reset,Reset"
bitfld.long 0x14 29. "          DMAIF5          ,Resets DMA channel 5 interface adapter between FPGA Fabric and HPS DMA controller" "No reset,Reset"
bitfld.long 0x14 28. "          DMAIF4        ,Resets DMA channel 4 interface adapter between FPGA Fabric and HPS DMA controller" "No reset,Reset"
newline
bitfld.long 0x14 27. " DMAIF3            ,Resets DMA channel 3 interface adapter between FPGA Fabric and HPS DMA controller" "No reset,Reset"
bitfld.long 0x14 26. "          DMAIF2            ,Resets DMA channel 2 interface adapter between FPGA Fabric and HPS DMA controller" "No reset,Reset"
bitfld.long 0x14 25. "          DMAIF1          ,Resets DMA channel 1 interface adapter between FPGA Fabric and HPS DMA controller" "No reset,Reset"
bitfld.long 0x14 24. "          DMAIF0        ,Resets DMA channel 0 interface adapter between FPGA Fabric and HPS DMA controller" "No reset,Reset"
newline
bitfld.long 0x14 22. " EMACPTP           ,Resets EMAC PTP" "No reset,Reset"
bitfld.long 0x14 21. "          DMAOCP            ,Resets DMA controller ECC OCP diagnostics modules" "No reset,Reset"
bitfld.long 0x14 20. "          SPIS1           ,Resets SPIS1 controller" "No reset,Reset"
bitfld.long 0x14 19. "          SPIS0         ,Resets SPIS0 controller" "No reset,Reset"
newline
bitfld.long 0x14 18. " SPIM1             ,Resets SPIM1 controller" "No reset,Reset"
bitfld.long 0x14 17. "          SPIM0             ,Resets SPIM0 controller" "No reset,Reset"
bitfld.long 0x14 16. "          DMA             ,Resets DMA controller" "No reset,Reset"
bitfld.long 0x14 15. "          SDMMCOCP      ,Resets SDMMC ECC OCP diagnostics modules" "No reset,Reset"
newline
bitfld.long 0x14 13. " NANDOCP           ,Resets NAND ECC OCP diagnostics modules" "No reset,Reset"
bitfld.long 0x14 12. "          USB1OCP           ,Resets USB1 ECC OCP diagnostics modules" "No reset,Reset"
bitfld.long 0x14 11. "          USB0OCP         ,Resets USB0 ECC OCP diagnostics modules" "No reset,Reset"
bitfld.long 0x14 10. "          EMAC2OCP      ,Resets EMAC2 ECC OCP diagnostics modules" "No reset,Reset"
newline
bitfld.long 0x14 9. " EMAC1OCP          ,Resets EMAC1 ECC OCP diagnostics modules" "No reset,Reset"
bitfld.long 0x14 8. "          EMAC0OCP          ,Resets EMAC0 ECC OCP diagnostics modules" "No reset,Reset"
bitfld.long 0x14 7. "          SDMMC           ,Resets SD/MMC controller" "No reset,Reset"
bitfld.long 0x14 5. "          NAND          ,Resets NAND flash controller" "No reset,Reset"
newline
bitfld.long 0x14 4. " USB1              ,Resets USB1" "No reset,Reset"
bitfld.long 0x14 3. "          USB0              ,Resets USB0" "No reset,Reset"
bitfld.long 0x14 2. "          EMAC2           ,Resets EMAC2" "No reset,Reset"
bitfld.long 0x14 1. "          EMAC1         ,Resets EMAC1" "No reset,Reset"
newline
bitfld.long 0x14 0. " EMAC0             ,Resets EMAC0" "No reset,Reset"
line.long 0x18 "PER1MODRST,Peripheral Module Reset Register"
bitfld.long 0x18 25. " GPIO1             ,Resets GPIO1" "No reset,Reset"
bitfld.long 0x18 24. "          GPIO0             ,Resets GPIO0" "No reset,Reset"
bitfld.long 0x18 17. "          UART1           ,Resets UART1" "No reset,Reset"
bitfld.long 0x18 16. "          UART0         ,Resets UART0" "No reset,Reset"
newline
bitfld.long 0x18 12. " I2C4              ,Resets I2C4 controller" "No reset,Reset"
bitfld.long 0x18 11. "          I2C3              ,Resets I2C3 controller" "No reset,Reset"
bitfld.long 0x18 10. "          I2C2            ,Resets I2C2 controller" "No reset,Reset"
bitfld.long 0x18 9. "          I2C1          ,Resets I2C1 controller" "No reset,Reset"
newline
bitfld.long 0x18 8. " I2C0              ,Resets I2C0 controller" "No reset,Reset"
bitfld.long 0x18 7. "          SPTIMER1          ,Resets SP timer 1 connected to L4" "No reset,Reset"
bitfld.long 0x18 6. "          SPTIMER0        ,Resets SP timer 0 connected to L4" "No reset,Reset"
bitfld.long 0x18 5. "          L4SYSTIMER1   ,Resets L4SYS_TIMER1" "No reset,Reset"
newline
bitfld.long 0x18 4. " L4SYSTIMER0       ,Resets L4SYS_TIMER0" "No reset,Reset"
bitfld.long 0x18 3. "          WATCHDOG3         ,Resets watchdog 3" "No reset,Reset"
bitfld.long 0x18 2. "          WATCHDOG2       ,Resets watchdog 2" "No reset,Reset"
bitfld.long 0x18 1. "          WATCHDOG1     ,Resets watchdog 1" "No reset,Reset"
newline
bitfld.long 0x18 0. " WATCHDOG0         ,Resets watchdog 0" "No reset,Reset"
line.long 0x1C "BRGMODRST,Bridge Reset Register"
bitfld.long 0x1C 6. " DDRSCH            ,Resets logic in the DDR scheduler in the NOC" "No reset,Reset"
bitfld.long 0x1C 5. "          F2SSDRAM2         ,Resets F2S_SDRAM2 bridge" "No reset,Reset"
bitfld.long 0x1C 4. "          F2SSDRAM1       ,Resets F2S_SDRAM1 bridge" "No reset,Reset"
bitfld.long 0x1C 3. "          F2SSDRAM0     ,Resets F2S_SDRAM0 bridge" "No reset,Reset"
newline
bitfld.long 0x1C 2. " F2SSDRAM0         ,Resets FPGA2SOC bridge" "No reset,Reset"
bitfld.long 0x1C 1. "          LWHPS2FPGA        ,Resets LWHPS2FPGA bridge" "No reset,Reset"
bitfld.long 0x1C 0. "          SOC2FPGA        ,Resets SOC2FPGA bridge" "No reset,Reset"
group.long 0x34++0x03
line.long 0x00 "COLDMODRST,COLD Module Reset Register"
bitfld.long 0x00 8. " L2                ,Resets L2 shared memory system contoller" "No reset,Reset"
bitfld.long 0x00 3. "          CPUPOR3           ,Resets ncpuporreset port of CPU3" "No reset,Reset"
bitfld.long 0x00 2. "          CPUPOR2         ,Resets ncpuporreset port of CPU2" "No reset,Reset"
bitfld.long 0x00 1. "          CPUPOR1       ,Resets ncpuporreset port of CPU1" "No reset,Reset"
newline
bitfld.long 0x00 0. " CPUPOR0           ,Resets ncpuporreset port of CPU0" "No reset,Reset"
group.long 0x3C++0x07
line.long 0x00 "DBGMODRST,Debug Module Reset Register"
bitfld.long 0x00 1. " CSDAP_RST         ,Resets logic located in the DAP domain" "No reset,Reset"
bitfld.long 0x00 0. "          DBG_RST           ,Resets logic located in the debug domain" "No reset,Reset"
line.long 0x04 "TAPMODRST,TAP Module Reset Register"
bitfld.long 0x04 0. " TAP               ,Resets logic located only in the jtag tap domain" "No reset,Reset"
group.long 0x4C++0x03
line.long 0x00 "BRGWARMMASK,Bridge Warm Mask Register"
bitfld.long 0x00 6. " DDRSCH            ,Masks hardware sequenced warm reset for the DDR Scheduler in the NOC" "Not masked,Masked"
bitfld.long 0x00 5. "        F2SSDRAM2         ,Masks hardware sequenced warm reset for F2S_SDRAM2 bridge" "Not masked,Masked"
bitfld.long 0x00 4. "        F2SSDRAM1       ,Masks hardware sequenced warm reset for F2S_SDRAM1 bridge" "Not masked,Masked"
bitfld.long 0x00 3. "        F2SSDRAM0     ,Masks hardware sequenced warm reset for F2S_SDRAM0 bridge" "Not masked,Masked"
newline
bitfld.long 0x00 2. " FPGA2SOC          ,Masks hardware sequenced warm reset for FPGA2SOC bridge" "Not masked,Masked"
bitfld.long 0x00 1. "        LWHPS2FPGA        ,Masks hardware sequenced warm reset for LWHPS2FPGA bridge" "Not masked,Masked"
bitfld.long 0x00 0. "        SOC2FPGA        ,Masks hardware sequenced warm reset for SOC2FPGA bridge" "Not masked,Masked"
rgroup.long 0x5C++0x03
line.long 0x00 "TSTSTA,Test Status Register"
bitfld.long 0x00 0.--4. " RSTST             ,Warm/cold reset control FSM state" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x64++0x07
line.long 0x00 "HDSKTIMEOUT,Hand Shake Time Out Value Register"
line.long 0x04 "MPUL2FLUSHTIMEOUT,MPU L2 FLUSH Time Out Value Register"
group.long 0x80++0x03
line.long 0x00 "OCRAMLOAD,On Chip RAM Load Done Register"
bitfld.long 0x00 0. " DONE              ,On chip ram loading is done" "Not done,Done"
group.long 0x04++0x03
line.long 0x00 "MPURSTSTAT,MPU Reset Status Register"
bitfld.long 0x00 11. " CORE3_IRQ         ,This bit indicates SDM that MPU software has asserted reset to core3 by writing to MPUMODRST register" "No reset,Reset"
bitfld.long 0x00 10. "          CORE2_IRQ         ,This bit indicates SDM that MPU software has asserted reset to core2 by writing to MPUMODRST register" "No reset,Reset"
bitfld.long 0x00 9. "          CORE1_IRQ       ,This bit indicates SDM that MPU software has asserted reset to core1 by writing to MPUMODRST register" "No reset,Reset"
bitfld.long 0x00 8. "          CORE0_IRQ     ,This bit indicates SDM that MPU software has asserted reset to core0 by writing to MPUMODRST register" "No reset,Reset"
newline
bitfld.long 0x00 3. " CPUPOR3_IRQ       ,This bit indicates SDM that MPU software has asserted reset to CPU3 by writing to the 'CPUPOR3' bit of register 'COLDMODRST'" "No reset,Reset"
bitfld.long 0x00 2. "          CPUPOR2_IRQ       ,This bit indicates SDM that MPU software has asserted reset to CPU2 by writing to the 'CPUPOR2' bit of register 'COLDMODRST'" "No reset,Reset"
bitfld.long 0x00 1. "          CPUPOR1_IRQ     ,This bit indicates SDM that MPU software has asserted reset to CPU1 by writing to the 'CPUPOR1' bit of register 'COLDMODRST'" "No reset,Reset"
bitfld.long 0x00 0. "          CPUPOR0_IRQ   ,This bit indicates SDM that MPU software has asserted reset to CPU0 by writing to the 'CPUPOR0' bit of register 'COLDMODRST'" "No reset,Reset"
group.long 0x6C++0x03
line.long 0x00 "DBGHDSKTIMEOUT,L3NOC Debug CS_DAP Handshake Time Out Value Register"
width 0x0B
tree.end
tree "SYSTEM_MGR (System Manager)"
base ad:0xFFD12000
width 21.
rgroup.long 0x00++0x07
line.long 0x00 "SILICONID1,Silicon ID1 Register"
hexmask.long.word 0x00 16.--31. 1. " ID              ,Silicon ID"
hexmask.long.word 0x00 0.--15. 1. "                          REV                  ,Silicon revision number"
line.long 0x04 "SILICONID2,Silicon ID2 Register"
bitfld.long 0x04 0.--3. " DEVICE_REVISION ,SDM writes the device revision value from fuses to HPS secure manager" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x08++0x03
line.long 0x00 "WDDBG,L4 Watchdog Debug Register"
bitfld.long 0x00 24.--27. " MODE_3          ,Controls behavior of L4 watchdog when CPUs in debug mode" "DONT_PAUSE,PAUSE_FOR_CPU0,PAUSE_FOR_CPU1,,PAUSE_FOR_CPU2,,,,PAUSE_FOR_CPU3,,,,,,,PAUSE_FOR_ANY_CPU"
bitfld.long 0x00 16.--19. "             MODE_2               ,Controls behavior of L4 watchdog when CPUs in debug mode" "DONT_PAUSE,PAUSE_FOR_CPU0,PAUSE_FOR_CPU1,,PAUSE_FOR_CPU2,,,,PAUSE_FOR_CPU3,,,,,,,PAUSE_FOR_ANY_CPU"
bitfld.long 0x00 8.--11. "    MODE_1          ,Controls behavior of L4 watchdog when CPUs in debug mode" "DONT_PAUSE,PAUSE_FOR_CPU0,PAUSE_FOR_CPU1,,PAUSE_FOR_CPU2,,,,PAUSE_FOR_CPU3,,,,,,,PAUSE_FOR_ANY_CPU"
newline
bitfld.long 0x00 0.--3. " MODE_0          ,Controls behavior of L4 watchdog when CPUs in debug mode" "DONT_PAUSE,PAUSE_FOR_CPU0,PAUSE_FOR_CPU1,,PAUSE_FOR_CPU2,,,,PAUSE_FOR_CPU3,,,,,,,PAUSE_FOR_ANY_CPU"
rgroup.long 0x10++0x03
line.long 0x00 "MPU_STATUS,MPU Control Register"
bitfld.long 0x00 0. " UNCORRERR       ,MPU sends 1 bit of ECC error signal to system manager" "No error,Error"
group.long 0x14++0x03
line.long 0x00 "MPU_ACE,MPU Control Register"
bitfld.long 0x00 8.--12. " ARQOS           ,Sets the priority of all write transactions originating from the MPU ACE socket" "LOW,MED,HIGH,?..."
bitfld.long 0x00 0.--3. "                          AWQOS                ,Sets the priority of all write transactions originating from the MPU ACE socket" "LOW,MED,HIGH,?..."
group.long 0x20++0x3F
line.long 0x00 "DMA,DMA Controller Register"
bitfld.long 0x00 31. " IRQ_NS[7]       ,Security state of an event-interrupt resource of bit 7" "Secure,Non-secure"
bitfld.long 0x00 30. "                    [6]                  ,Security state of an event-interrupt resource of bit 6" "Secure,Non-secure"
bitfld.long 0x00 29. "           [5]             ,Security state of an event-interrupt resource of bit 5" "Secure,Non-secure"
newline
bitfld.long 0x00 28. " [4]             ,Security state of an event-interrupt resource of bit 4" "Secure,Non-secure"
bitfld.long 0x00 27. "                    [3]                  ,Security state of an event-interrupt resource of bit 3" "Secure,Non-secure"
bitfld.long 0x00 26. "           [2]             ,Security state of an event-interrupt resource of bit 2" "Secure,Non-secure"
newline
bitfld.long 0x00 25. " [1]             ,Security state of an event-interrupt resource of bit 1" "Secure,Non-secure"
bitfld.long 0x00 24. "                    [0]                  ,Security state of an event-interrupt resource of bit 0" "Secure,Non-secure"
bitfld.long 0x00 16. "           MGR_NS          ,Specifies the security state of the DMA manager thread" "Secure,Non secure"
newline
bitfld.long 0x00 4. " CHANSEL_1       ,Channel 1 selects between FPGA and I2C4_EMAC_RX" "FPGA,I2C4_RX"
bitfld.long 0x00 0. "                       CHANSEL_0            ,Channel 0 selects between FPGA and I2C4_EMAC_RX" "FPGA,I2C4_RX"
line.long 0x04 "DMA_PERIPH,Peripheral Security Register"
line.long 0x08 "SDMMC,SDMMC Control Register"
bitfld.long 0x08 4.--6. " SMPLSEL         ,Select which phase shift of the clock for CCLK_IN_SAMPLE" "Degrees0,Degrees45,Degrees90,Degrees135,Degrees180,Degrees225,Degrees270,Degrees315"
bitfld.long 0x08 0.--2. "                    DRVSEL               ,Select which phase shift of the clock for CCLK_IN_DRV" "Degrees0,Degrees45,Degrees90,Degrees135,Degrees180,Degrees225,Degrees270,Degrees315"
line.long 0x0C "SDMMC_L3MASTER,SD/MMC L3 Master HPROT Register"
hexmask.long.word 0x0C 16.--25. 1. " HAUSER22_13     ,Bit[22:13] xsid"
bitfld.long 0x0C 8.--9. "                          HAUSER7_6            ,Bit[7:6] domai" "0,1,2,3"
bitfld.long 0x0C 4.--5. "                    HAUSER0_1       ,Bit[1] secure bit[0] allocate" "0,1,2,3"
newline
bitfld.long 0x0C 3. " HPROT[3]        ,HPROT[3] Cachable" "Non-cacheable,Cacheable"
bitfld.long 0x0C 2. "                 HPROT[2]             ,HPROT[2] Bufferable" "Non-bufferable,Bufferable"
bitfld.long 0x0C 1. "       HPROT[1]        ,HPROT[1] Privileged" "Non-privileged,Privileged"
newline
bitfld.long 0x0C 0. " HPROT[0]        ,HPROT[0] Data/Opcode" "Opcode,Data"
line.long 0x10 "NAND_BOOTSTRAP,Bootstrap Control Register"
bitfld.long 0x10 28. " PAGE512_X16     ,If 1 NAND device has 512 bytes page size and I/O width is 16 bits" "0,1"
bitfld.long 0x10 24. "                             PAGE512              ,If 1 NAND device has a 512 byte page size" "0,1"
bitfld.long 0x10 16. "                    TWOROWADDR      ,If 1 NAND device requires only 2 row address cycles instead of the normal 3 row address cycles" "0,1"
newline
bitfld.long 0x10 8. " NOLOADB0P0      ,If 1 inhibits NAND Flash Controller from loading page 0 of block 0 of the NAND device as part of the initialization procedure" "0,1"
bitfld.long 0x10 0. "                             NOINIT               ,If 1 inhibits NAND Flash Controller from performing initialization when coming out of reset" "0,1"
line.long 0x14 "NAND_L3MASTER,NAND L3 Master AxCACHE Register"
bitfld.long 0x14 20.--22. " ARPROT          ,Ar prot register" "0,1,2,3,4,5,6,7"
bitfld.long 0x14 16.--18. "                             AWPROT               ,Aw prot register" "0,1,2,3,4,5,6,7"
bitfld.long 0x14 12.--13. "                    ARDOMAIN        ,Ar domain register" "0,1,2,3"
newline
bitfld.long 0x14 8.--9. " AWDOMAIN        ,Aw domain register" "0,1,2,3"
bitfld.long 0x14 4.--7. "                             AWCACHE_0            ,Specifies the value of the module AWCACHE signal" "Noncache_Nonbuff,Buff,Cache_Nonalloc,Cache_Buff_Nonalloc,,,Cache_Wrthru_Rdalloc,Cache_Wrback_Rdalloc,,,Cache_Wrthru_Wralloc,Cache_Wrback_Wralloc,,,Cache_Wrthru_Alloc,Cache_Wrback_Alloc"
bitfld.long 0x14 0.--3. " ARCACHE_0       ,Specifies the value of the module ARCACHE signal" "Noncache_Nonbuff,Buff,Cache_Nonalloc,Cache_Buff_Nonalloc,,,Cache_Wrthru_Rdalloc,Cache_Wrback_Rdalloc,,,Cache_Wrthru_Wralloc,Cache_Wrback_Wralloc,,,Cache_Wrthru_Alloc,Cache_Wrback_Alloc"
line.long 0x18 "USB0_L3MASTER,USB L3 Master HPROT AHB-Lite Register"
hexmask.long.word 0x18 16.--25. 1. " HAUSER22_13     ,Hauser[22:13]"
bitfld.long 0x18 12.--13. "                          HAUSER7_6            ,Hauser[7:6]" "0,1,2,3"
bitfld.long 0x18 9. "                    HAUSER_1        ,Hauser[1] secure" "0,1"
newline
bitfld.long 0x18 8. " HAUSER_0        ,Hauser[0] allocate" "0,1"
bitfld.long 0x18 3. "                             HPROT[3]             ,HPROT[3] Cachable" "Non-cacheable,Cacheable"
bitfld.long 0x18 2. "        HPROT[2]        ,HPROT[2] Bufferable" "Non-bufferable,Bufferable"
newline
bitfld.long 0x18 1. " HPROT[1]        ,HPROT[1] Privileged" "Non-privileged,Privileged"
bitfld.long 0x18 0. "                HPROT[0]             ,HPROT[0] Data/Opcode" "Opcode,Data"
line.long 0x1C "USB1_L3MASTER,USB L3 Master HPROT AHB-Lite Register"
hexmask.long.word 0x1C 16.--25. 1. " HAUSER22_13     ,Hauser[22:13] sid"
bitfld.long 0x1C 12.--13. "                          HAUSER7_6            ,Hauser[7:6] domain" "0,1,2,3"
bitfld.long 0x1C 9. "                    HAUSER_1        ,Hauser[1] secure" "0,1"
newline
bitfld.long 0x1C 8. " HAUSER_0        ,Hauser[0] allocate" "0,1"
bitfld.long 0x1C 3. "                             HPROT[3]             ,HPROT[3] Cachable" "Non-cacheable,Cacheable"
bitfld.long 0x1C 2. "        HPROT[2]        ,HPROT[2] Bufferable" "Non-bufferable,Bufferable"
newline
bitfld.long 0x1C 1. " HPROT[1]        ,HPROT[1] Privileged" "User,Privileged"
bitfld.long 0x1C 0. "                    HPROT[0]             ,HPROT[0] Data/Opcode" "Opcode,Data"
line.long 0x20 "EMAC_GLOBAL,EMAC L3 Master AxCACHE Register"
bitfld.long 0x20 0. " PTP_CLK_SEL     ,Source of the PTP reference clock" "EMAC_PTP_CLK,F2S_PTP_REF_CLK"
line.long 0x24 "EMAC0,EMAC0 Control Register"
bitfld.long 0x24 31. " AXI_DISABLE     ,AXI disable" "No,Yes"
bitfld.long 0x24 30. "                           SBD_DATA_ENDIANNESS  ,Specifies the endianness of the EMAC DMA transfers" "Little_Endian,Big_Endian"
bitfld.long 0x24 27.--29. "        AWPROT          ,Specifies the values of the 2 EMAC AWCACHE signals" "Secure Normal access,Secure Privileged access,Non-Secure Normal access,Non-Secure Privileged access,?..."
newline
bitfld.long 0x24 24.--26. " ARPROT          ,Specifies the values of the ARPROT signals" "Secure Normal access,Secure Privileged access,Non-Secure Normal access,Non-Secure Privileged access,?..."
bitfld.long 0x24 20.--23. "  AWCACHE              ,Specifies the values of the 2 EMAC AWCACHE signals" "Noncache_Nonbuff,Buff,Cache_Nonalloc,Cache_Buff_Nonalloc,,,Cache_Wrthru_Rdalloc,Cache_Wrback_Rdalloc,,,Cache_Wrthru_Wralloc,Cache_Wrback_Wralloc,,,Cache_Wrthru_Alloc,Cache_Wrback_Alloc"
bitfld.long 0x24 16.--19. " ARCACHE         ,Specifies the values of the 2 EMAC ARCACHE signals" "Noncache_Nonbuff,Buff,Cache_Nonalloc,Cache_Buff_Nonalloc,,,Cache_Wrthru_Rdalloc,Cache_Wrback_Rdalloc,,,Cache_Wrthru_Wralloc,Cache_Wrback_Wralloc,,,Cache_Wrthru_Alloc,Cache_Wrback_Alloc"
newline
bitfld.long 0x24 8. " PTP_REF_SEL     ,Selects if the Timestamp reference is internally or externally generated" "Internal,External"
bitfld.long 0x24 0.--1. "                      PHY_INTF_SEL         ,PHY interface select" "GMII_MII,RGMII,RMII,RESET"
line.long 0x28 "EMAC1,EMAC1 Control Register"
bitfld.long 0x28 31. " AXI_DISABLE     ,AXI disable" "No,Yes"
bitfld.long 0x28 30. "                           SBD_DATA_ENDIANNESS  ,Specifies the endianness of the EMAC DMA transfers" "Little_Endian,Big_Endian"
bitfld.long 0x28 27.--29. "        AWPROT          ,Specifies the values of the 2 EMAC AWCACHE signals" "Secure Normal access,Secure Privileged access,Non-Secure Normal access,Non-Secure Privileged access,?..."
newline
bitfld.long 0x28 24.--26. " ARPROT          ,Specifies the values of the ARPROT signals" "Secure Normal access,Secure Privileged access,Non-Secure Normal access,Non-Secure Privileged access,?..."
bitfld.long 0x28 20.--23. "  AWCACHE              ,Specifies the values of the 2 EMAC AWCACHE signals" "Noncache_Nonbuff,Buff,Cache_Nonalloc,Cache_Buff_Nonalloc,,,Cache_Wrthru_Rdalloc,Cache_Wrback_Rdalloc,,,Cache_Wrthru_Wralloc,Cache_Wrback_Wralloc,,,Cache_Wrthru_Alloc,Cache_Wrback_Alloc"
bitfld.long 0x28 16.--19. " ARCACHE         ,Specifies the values of the 2 EMAC ARCACHE signals" "F2s_ap_clk,Buff,Cache_Nonalloc,Cache_Buff_Nonalloc,,,Cache_Wrthru_Rdalloc,Cache_Wrback_Rdalloc,,,Cache_Wrthru_Wralloc,Cache_Wrback_Wralloc,,,Cache_Wrthru_Alloc,Cache_Wrback_Alloc"
newline
bitfld.long 0x28 8. " PTP_REF_SEL     ,Selects if the Timestamp reference is internally or externally generated" "Internal,External"
bitfld.long 0x28 0.--1. "                      PHY_INTF_SEL         ,PHY interface select" "GMII_MII,RGMII,RMII,RESET"
line.long 0x2C "EMAC2,EMAC2 Control Register"
bitfld.long 0x2C 31. " AXI_DISABLE     ,AXI disable" "No,Yes"
bitfld.long 0x2C 30. "                           SBD_DATA_ENDIANNESS  ,Specifies the endianness of the EMAC DMA transfers" "Little_Endian,Big_Endian"
bitfld.long 0x2C 27.--29. "        AWPROT          ,Specifies the values of the 2 EMAC AWCACHE signals" "Secure Normal access,Secure Privileged access,Non-Secure Normal access,Non-Secure Privileged access,?..."
newline
bitfld.long 0x2C 24.--26. " ARPROT          ,Specifies the values of the ARPROT signals" "Secure Normal access,Secure Privileged access,Non-Secure Normal access,Non-Secure Privileged access,?..."
bitfld.long 0x2C 20.--23. "  AWCACHE              ,Specifies the values of the 2 EMAC AWCACHE signals" "Noncache_Nonbuff,Buff,Cache_Nonalloc,Cache_Buff_Nonalloc,,,Cache_Wrthru_Rdalloc,Cache_Wrback_Rdalloc,,,Cache_Wrthru_Wralloc,Cache_Wrback_Wralloc,,,Cache_Wrthru_Alloc,Cache_Wrback_Alloc"
bitfld.long 0x2C 16.--19. " ARCACHE         ,Specifies the values of the 2 EMAC ARCACHE signals" "Noncache_Nonbuff,Buff,Cache_Nonalloc,Cache_Buff_Nonalloc,,,Cache_Wrthru_Rdalloc,Cache_Wrback_Rdalloc,,,Cache_Wrthru_Wralloc,Cache_Wrback_Wralloc,,,Cache_Wrthru_Alloc,Cache_Wrback_Alloc"
newline
bitfld.long 0x2C 8. " PTP_REF_SEL     ,Selects if the Timestamp reference is internally or externally generated" "Internal,External"
bitfld.long 0x2C 0.--1. "                      PHY_INTF_SEL         ,PHY interface select" "GMII_MII,RGMII,RMII,RESET"
line.long 0x30 "EMAC0_ACE,EMAC0 ACE-Lite Control Register"
hexmask.long.word 0x30 20.--29. 1. " AWSID           ,Awsid"
hexmask.long.word 0x30 8.--17. 1. "                          ARSID                ,Arsid"
bitfld.long 0x30 4.--5. "                 AWDOMAIN        ,Aw domain" "0,1,2,3"
newline
bitfld.long 0x30 0.--1. " ARDOMAIN        ,Ar domain" "0,1,2,3"
line.long 0x34 "EMAC1_ACE,EMAC1 ACE-Lite Control Register"
hexmask.long.word 0x34 20.--29. 1. " AWSID           ,Awsid"
hexmask.long.word 0x34 8.--17. 1. "                          ARSID                ,Arsid"
bitfld.long 0x34 4.--5. "                 AWDOMAIN        ,Aw domain" "0,1,2,3"
newline
bitfld.long 0x34 0.--1. " ARDOMAIN        ,Ar domain" "0,1,2,3"
line.long 0x38 "EMAC2_ACE,EMAC2 ACE-Lite Control Register"
hexmask.long.word 0x38 20.--29. 1. " AWSID           ,Awsid"
hexmask.long.word 0x38 8.--17. 1. "                          ARSID                ,Arsid"
bitfld.long 0x38 4.--5. "                 AWDOMAIN        ,Aw domain" "0,1,2,3"
newline
bitfld.long 0x38 0.--1. " ARDOMAIN        ,Ar domain" "0,1,2,3"
line.long 0x3C "NAND_AXUSER,NAND ACE-lite Contrl A(w/r)user Register"
hexmask.long.word 0x3C 16.--25. 1. " ARUSER          ,Aw user register sid"
hexmask.long.word 0x3C 0.--9. 1. "                          AWUSER               ,Ar user register sid"
group.long 0x68++0x13
line.long 0x00 "FPGAINTF_EN_1,FPGA Interface Individual 1 Enable Register"
bitfld.long 0x00 24. " CTMTRIGGER      ,FPGA fabric sending triggers to HPS debug logic enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                      STMEVENT             ,STM event interface enable" "Disabled,Enabled"
bitfld.long 0x00 8. "             DBGAPB          ,Debug APB interface enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. " TRACEOUT        ,Gates the isolator of CoreSight" "Disabled,Enabled"
bitfld.long 0x00 0. "                      TRACEIN              ,Gates the isolator of TPIU" "Disabled,Enabled"
line.long 0x04 "FPGAINTF_EN_2,FPGA Interface Individual 2 Enable Register"
bitfld.long 0x04 24. " SPIM_1          ,Signals from the FPGA fabric to the SPI master modules enable" "Disabled,Enabled"
bitfld.long 0x04 16. "                      SPIM_0               ,Signals from the FPGA fabric to the SPI master modules enable" "Disabled,Enabled"
bitfld.long 0x04 8. "             SDMMC           ,Signals from the FPGA fabric to the SD/MMC controller module enable" "Disabled,Enabled"
newline
bitfld.long 0x04 4. " NAND            ,Signals from the FPGA fabric to the NAND flash controller module enable" "Disabled,Enabled"
line.long 0x08 "FPGAINTF_EN_3,FPGA Interface Individual 3 Enable Register"
bitfld.long 0x08 16. " EMAC_2          ,Signals from the FPGA fabric to the EMAC 2 modules enable" "Disabled,Enabled"
bitfld.long 0x08 8. "                      EMAC_1               ,Signals from the FPGA fabric to the EMAC 1 modules enable" "Disabled,Enabled"
bitfld.long 0x08 0. "             EMAC_0          ,Signals from the FPGA fabric to the EMAC 0 modules enable" "Disabled,Enabled"
line.long 0x0C "DMA_L3MASTER,ACE-lite Control - DMA_L3MASTER Register"
hexmask.long.word 0x0C 16.--25. 1. " ARUSER          ,Ar sid register"
bitfld.long 0x0C 14.--15. "                          ARDOMAIN             ,Ar domain register" "0,1,2,3"
bitfld.long 0x0C 12.--13. "                    AWDOMAIN        ,Aw domain register" "0,1,2,3"
newline
hexmask.long.word 0x0C 0.--9. 1. " AWUSER          ,Aw sid register"
line.long 0x10 "ETR_L3MASTER,ACE-lite Control - ETR_L3MASTER Register"
hexmask.long.word 0x10 16.--25. 1. " ARUSER          ,Ar sid register"
bitfld.long 0x10 14.--15. "                          ARDOMAIN             ,Ar domain register" "0,1,2,3"
bitfld.long 0x10 12.--13. "                    AWDOMAIN        ,Aw domain register" "0,1,2,3"
newline
hexmask.long.word 0x10 0.--9. 1. " AWUSER          ,Aw sid register"
rgroup.long 0x80++0x07
line.long 0x00 "SEC_CTRL_SLT,Clock Selection Register"
bitfld.long 0x00 0. " VAL             ,Value secure clock selection" "0,1"
line.long 0x04 "OSC_TRIM,OSC_TRIM Register To Show Internal Oscillator"
hexmask.long.byte 0x04 0.--7. 1. " VAL             ,Register that shows trim of internal oscillator"
group.long 0x90++0x03
line.long 0x00 "ECC_INTMASK_SET/CLR,ECC Interrupt Mask Set/Clear Register"
setclrfld.long 0x00 17. 0x04 17. 0x08 17. " DDR1            ,DDR1" "0,1"
setclrfld.long 0x00 16. 0x04 16. 0x08 16. "                             DDR0                 ,DDR0" "0,1"
setclrfld.long 0x00 15. 0x04 15. 0x08 15. "                    SDMMCB          ,SDMMCB" "0,1"
newline
setclrfld.long 0x00 14. 0x04 14. 0x08 14. " SDMMCA          ,SDMMCA" "0,1"
setclrfld.long 0x00 13. 0x04 13. 0x08 13. "                             NAND_RD              ,NAND_RD" "0,1"
setclrfld.long 0x00 12. 0x04 12. 0x08 12. "                    NAND_WR         ,NAND_WR" "0,1"
newline
setclrfld.long 0x00 11. 0x04 11. 0x08 11. " NAND_BUF        ,NAND_BUF" "0,1"
setclrfld.long 0x00 10. 0x04 10. 0x08 10. "                             DMA                  ,DMA" "0,1"
setclrfld.long 0x00 9. 0x04 9. 0x08 9. "                    EMAC2_TX        ,EMAC2_TX" "0,1"
newline
setclrfld.long 0x00 8. 0x04 8. 0x08 8. " EMAC2_RX        ,EMAC2_RX" "0,1"
setclrfld.long 0x00 7. 0x04 7. 0x08 7. "                             EMAC1_TX             ,EMAC1_TX" "0,1"
setclrfld.long 0x00 6. 0x04 6. 0x08 6. "                    EMAC1_RX        ,EMAC1_RX" "0,1"
newline
setclrfld.long 0x00 5. 0x04 5. 0x08 5. " EMAC0_TX        ,EMAC0_TX" "0,1"
setclrfld.long 0x00 4. 0x04 4. 0x08 4. "                             EMAC0_RX             ,EMAC0_RX" "0,1"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. "                    USB1            ,USB1" "0,1"
newline
setclrfld.long 0x00 2. 0x04 2. 0x08 2. " USB0            ,USB0" "0,1"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "                             OCRAM                ,OCRAM" "0,1"
rgroup.long 0x9C++0x07
line.long 0x00 "ECC_INTSTATUS_SERR,ECC Single Bit Error Status Of Individual Modules Register"
bitfld.long 0x00 17. " DDR1            ,DDR1" "No error,Error"
bitfld.long 0x00 16. "                      DDR0                 ,DDR0" "No error,Error"
bitfld.long 0x00 15. "             SDMMCB          ,SDMMCB" "No error,Error"
newline
bitfld.long 0x00 14. " SDMMCA          ,SDMMCA" "No error,Error"
bitfld.long 0x00 13. "                      NAND_RD              ,NAND_RD" "No error,Error"
bitfld.long 0x00 12. "             NAND_WR         ,NAND_WR" "No error,Error"
newline
bitfld.long 0x00 11. " NAND_BUF        ,NAND_BUF" "No error,Error"
bitfld.long 0x00 10. "                      DMA                  ,DMA" "No error,Error"
bitfld.long 0x00 9. "             EMAC2_TX        ,EMAC2_TX" "No error,Error"
newline
bitfld.long 0x00 8. " EMAC2_RX        ,EMAC2_RX" "No error,Error"
bitfld.long 0x00 7. "                      EMAC1_TX             ,EMAC1_TX" "No error,Error"
bitfld.long 0x00 6. "             EMAC1_RX        ,EMAC1_RX" "No error,Error"
newline
bitfld.long 0x00 5. " EMAC0_TX        ,EMAC0_TX" "No error,Error"
bitfld.long 0x00 4. "                      EMAC0_RX             ,EMAC0_RX" "No error,Error"
bitfld.long 0x00 3. "             USB1            ,USB1" "No error,Error"
newline
bitfld.long 0x00 2. " USB0            ,USB0" "No error,Error"
bitfld.long 0x00 1. "                      OCRAM                ,OCRAM" "No error,Error"
line.long 0x04 "ECC_INTSTATUS_DERR,ECC Double Bit Error Status Of Individual Modules Register"
bitfld.long 0x04 17. " DDR1            ,DDR1" "No error,Error"
bitfld.long 0x04 16. "                      DDR0                 ,DDR0" "No error,Error"
bitfld.long 0x04 15. "             SDMMCB          ,SDMMCB" "No error,Error"
newline
bitfld.long 0x04 14. " SDMMCA          ,SDMMCA" "No error,Error"
bitfld.long 0x04 13. "                      NAND_RD              ,NAND_RD" "No error,Error"
bitfld.long 0x04 12. "             NAND_WR         ,NAND_WR" "No error,Error"
newline
bitfld.long 0x04 11. " NAND_BUF        ,NAND_BUF" "No error,Error"
bitfld.long 0x04 10. "                      DMA                  ,DMA" "No error,Error"
bitfld.long 0x04 9. "             EMAC2_TX        ,EMAC2_TX" "No error,Error"
newline
bitfld.long 0x04 8. " EMAC2_RX        ,EMAC2_RX" "No error,Error"
bitfld.long 0x04 7. "                      EMAC1_TX             ,EMAC1_TX" "No error,Error"
bitfld.long 0x04 6. "             EMAC1_RX        ,EMAC1_RX" "No error,Error"
newline
bitfld.long 0x04 5. " EMAC0_TX        ,EMAC0_TX" "No error,Error"
bitfld.long 0x04 4. "                      EMAC0_RX             ,EMAC0_RX" "No error,Error"
bitfld.long 0x04 3. "             USB1            ,USB1" "No error,Error"
newline
bitfld.long 0x04 2. " USB0            ,USB0" "No error,Error"
bitfld.long 0x04 1. "                      OCRAM                ,OCRAM" "No error,Error"
group.long 0xB0++0x03
line.long 0x00 "NOC_ADDR_REMAP,NOC_ADDR_REPMAP Register To View The HPS Memory Map (Specifically On-Chip RAM)"
bitfld.long 0x00 0. " SDM2HPS_BE      ,Lowest 1 MB of SDM2HPS_BE memory view decodes direction" "On-chip RAM,DRAM"
rgroup.long 0xB4++0x03
line.long 0x00 "HMC_CLK,HMC Clock And IO Lock Status Indicator Register"
bitfld.long 0x00 18. " IO_CPA_LOCK_C   ,CPA lock C status" "0,1"
bitfld.long 0x00 17. "                             IO_CPA_LOCK_B        ,CPA lock B status" "0,1"
bitfld.long 0x00 16. "                    IO_CPA_LOCK_A   ,CPA lock A status" "0,1"
newline
bitfld.long 0x00 10. " IO_PLL_LOCK_C   ,PLL lock C status" "0,1"
bitfld.long 0x00 9. "                             IO_PLL_LOCK_B        ,PLL lock B status" "0,1"
bitfld.long 0x00 8. "                    IO_PLL_LOCK_A   ,PLL lock A status" "0,1"
newline
bitfld.long 0x00 0. " STATUS          ,HMC clock status" "Not running,Running"
group.long 0xB8++0x03
line.long 0x00 "IO_PA_CTRL,HMC Clock Status Indicator Register"
bitfld.long 0x00 2. " IO_PA_RESET_N_C ,This will allow HPS software to control when it wants to start receiving the IO48 clock" "0,1"
bitfld.long 0x00 1. "                             IO_PA_RESET_N_B      ,This will allow HPS software to control when it wants to start receiving the IO48 clock" "0,1"
bitfld.long 0x00 0. "                    IO_PA_RESET_N_A ,This will allow HPS software to control when it wants to start receiving the IO48 clock" "0,1"
group.long 0xC0++0x03
line.long 0x00 "NOC_TIMEOUT,NOC Timeout Register"
bitfld.long 0x00 0. " EN              ,NOC timeout enable" "Disabled,Enabled"
wgroup.long 0xC4++0x03
line.long 0x00 "NOC_IDLEREQ_SET/CLR,Set/Clear IDLE Request To Each NOC Master Register"
setclrfld.long 0x00 4. 0x00 4. 0x04 4. " LWSOC2FPGA      ,LWSOC2FPGA" "0,1"
setclrfld.long 0x00 0. 0x00 0. 0x04 0. "                             SOC2FPGA             ,SOC2FPGA" "0,1"
rgroup.long 0xD0++0x07
line.long 0x00 "NOC_IDLEACK,Idle Acknowledge Value From NOC Masters Register"
bitfld.long 0x00 4. " LWSOC2FPGA      ,LWSOC2FPGA" "Not asserted,Asserted"
bitfld.long 0x00 0. "                  SOC2FPGA             ,SOC2FPGA" "Not asserted,Asserted"
line.long 0x04 "NOC_IDLESTATUS,Status Of IDLE From The NOC Masters"
bitfld.long 0x04 4. " LWSOC2FPGA      ,LWSOC2FPGA" "Not idle,Idle"
bitfld.long 0x04 0. "                      SOC2FPGA             ,SOC2FPGA" "Not idle,Idle"
group.long 0xD8++0x03
line.long 0x00 "FPGA2SOC_CTRL,FPGA2SOC_CTRL Register"
bitfld.long 0x00 0. " ALLOW_SECURE    ,Acquiescence of secure or non-secure transactions" "Non-secure,Both"
rgroup.long 0xDC++0x03
line.long 0x00 "FPGA_CONFIG,FPGA Configuration Register"
bitfld.long 0x00 1. " EARLY_USERMODE  ,FGPA early usermode configuration complete" "Not completed,Completed"
bitfld.long 0x00 0. "                 FPGA_COMPLETE        ,FGPA configuration complete" "Not completed,Completed"
group.long 0xE0++0x07
line.long 0x00 "IOCSRCLK_GATE,IO Clock Control Register"
bitfld.long 0x00 16. " TILEC           ,Tile C clock control" "0,1"
bitfld.long 0x00 8. "                             TILEB                ,Tile B clock control" "0,1"
bitfld.long 0x00 0. "                    TILEA           ,Tile A clock control" "0,1"
line.long 0x04 "GPO,Provides A Low-Latency, Low-Performance, And Simple Way To Drive General-Purpose Signals To The FPGA Fabric Register"
rgroup.long 0xE8++0x03
line.long 0x00 "GPI,Provides A Low-Latency, Low-Performance, And Simple Way To Read General-Purpose Signals Driven From The FPGA Fabric Register"
group.long 0xF0++0x03
line.long 0x00 "MPU,Provides A Low-Latency, Low-Performance, And Simple Way To Read General-Purpose Signals Driven From The FPGA Fabric Register"
bitfld.long 0x00 0. " MPU_CFGSDISABLE ,CFGSDISABLE is typically de-asserted (0) from reset until Secure software has configured the GIC-400 and then subsequently asserted permanently to provide extra security" "0,1"
group.long 0x200++0x03
line.long 0x00 "BOOT_SCRATCH_COLD0,Boot Scratch Register 0"
group.long 0x204++0x03
line.long 0x00 "BOOT_SCRATCH_COLD1,Boot Scratch Register 1"
group.long 0x208++0x03
line.long 0x00 "BOOT_SCRATCH_COLD2,Boot Scratch Register 2"
group.long 0x20C++0x03
line.long 0x00 "BOOT_SCRATCH_COLD3,Boot Scratch Register 3"
group.long 0x210++0x03
line.long 0x00 "BOOT_SCRATCH_COLD4,Boot Scratch Register 4"
group.long 0x214++0x03
line.long 0x00 "BOOT_SCRATCH_COLD5,Boot Scratch Register 5"
group.long 0x218++0x03
line.long 0x00 "BOOT_SCRATCH_COLD6,Boot Scratch Register 6"
group.long 0x21C++0x03
line.long 0x00 "BOOT_SCRATCH_COLD7,Boot Scratch Register 7"
group.long 0x220++0x03
line.long 0x00 "BOOT_SCRATCH_COLD8,Boot Scratch Register 8"
group.long 0x224++0x03
line.long 0x00 "BOOT_SCRATCH_COLD9,Boot Scratch Register 9"
width 0x0B
tree.end
tree "DEDICATED_PINMUX (HPS Pinmux CSR)"
base ad:0xFFD13000
width 26.
tree "HPS Pinmux Select Registers"
group.long 0x00++0x9F
line.long 0x00 "PIN0SEL,HPS Pinmux Select Register 0"
bitfld.long 0x00 0.--3. " VAL          ,Select value determines which interface has been selected for IO0" "sdmmc.cclk,usb0.clk,trace.d10,nand.adq0,,uart0.cts_n,spis0.clk,spim0.ss1_n,gpio0.io0,?..."
line.long 0x04 "PIN1SEL,HPS Pinmux Select Register 1"
bitfld.long 0x04 0.--3. " VAL          ,Select value determines which interface has been selected for IO1" "sdmmc.cmd,usb0.stp,trace.d9,nand.adq1,,uart0.rts_n,spis0.mosi,spim1.ss1_n,gpio0.io1,?..."
line.long 0x08 "PIN2SEL,HPS Pinmux Select Register 2"
bitfld.long 0x08 0.--3. " VAL          ,Select value determines which interface has been selected for IO2" "sdmmc.data0,usb0.dir,trace.d8,nand.we_n,i2c1.sda,uart0.tx,spis0.ss0_n,,gpio0.io2,?..."
line.long 0x0C "PIN3SEL,HPS Pinmux Select Register 3"
bitfld.long 0x0C 0.--3. " VAL          ,Select value determines which interface has been selected for IO3" "sdmmc.data1,usb0.data0,trace.d7,nand.re_n,i2c1.scl,uart0.rx,spis0.miso,,gpio0.io3,?..."
line.long 0x10 "PIN4SEL,HPS Pinmux Select Register 4"
bitfld.long 0x10 0.--3. " VAL          ,Select value determines which interface has been selected for IO4" "sdmmc.data2,usb0.data1,trace.d6,nand.wp_n,i2c0.sda,uart1.cts_n,,spim0.clk,gpio0.io4,?..."
line.long 0x14 "PIN5SEL,HPS Pinmux Select Register 5"
bitfld.long 0x14 0.--3. " VAL          ,Select value determines which interface has been selected for IO5" "sdmmc.data3,usb0.nxt,trace.d5,nand.adq2,i2c0.scl,uart1.rts_n,,spim0.mosi,gpio0.io5,?..."
line.long 0x18 "PIN6SEL,HPS Pinmux Select Register 6"
bitfld.long 0x18 0.--3. " VAL          ,Select value determines which interface has been selected for IO6" "sdmmc.data4,usb0.data2,trace.d4,nand.adq3,i2c_emac2.sda,uart1.tx,mdio2.mdio,spim0.miso,gpio0.io6,?..."
line.long 0x1C "PIN7SEL,HPS Pinmux Select Register 7"
bitfld.long 0x1C 0.--3. " VAL          ,Select value determines which interface has been selected for IO7" "sdmmc.data5,usb0.data3,trace.d15,nand.cle,i2c_emac2.scl,uart1.rx,mdio2.mdc,spim0.ss0_n,gpio0.io7,?..."
line.long 0x20 "PIN8SEL,HPS Pinmux Select Register 8"
bitfld.long 0x20 0.--3. " VAL          ,Select value determines which interface has been selected for IO8" "sdmmc.data6,usb0.data4,trace.d14,nand.adq4,i2c_emac1.sda,mdio1.mdio,spis1.clk,spim1.clk,gpio0.io8,?..."
line.long 0x24 "PIN9SEL,HPS Pinmux Select Register 9"
bitfld.long 0x24 0.--3. " VAL          ,Select value determines which interface has been selected for IO9" "sdmmc.data7,usb0.data5,trace.d13,nand.adq5,i2c_emac1.scl,mdio1.mdc,spis1.mosi,spim1.mosi,gpio0.io9,?..."
line.long 0x28 "PIN10SEL,HPS Pinmux Select Register 10"
bitfld.long 0x28 0.--3. " VAL          ,Select value determines which interface has been selected for IO10" "sdmmc.pwr_en,usb0.data6,trace.d12,nand.adq6,i2c_emac0.sda,mdio0.mdio,spis1.ss0_n,spim1.miso,gpio0.io10,?..."
line.long 0x2C "PIN11SEL,HPS Pinmux Select Register 11"
bitfld.long 0x2C 0.--3. " VAL          ,Select value determines which interface has been selected for IO11" ",usb0.data7,trace.d11,nand.adq7,i2c_emac0.scl,mdio0.mdc,spis1.miso,spim1.ss0_n,gpio0.io11,?..."
line.long 0x30 "PIN12SEL,HPS Pinmux Select Register 12"
bitfld.long 0x30 0.--3. " VAL          ,Select value determines which interface has been selected for IO12" "emac0.tx_clk,usb1.clk,trace.d10,nand.ale,,,,,gpio0.io12,?..."
line.long 0x34 "PIN13SEL,HPS Pinmux Select Register 13"
bitfld.long 0x34 0.--3. " VAL          ,Select value determines which interface has been selected for IO13" "emac0.tx_ctl,usb1.stp,trace.d9,nand.rb,,,,,gpio0.io13,?..."
line.long 0x38 "PIN14SEL,HPS Pinmux Select Register 14"
bitfld.long 0x38 0.--3. " VAL          ,Select value determines which interface has been selected for IO14" "emac0.rx_clk,usb1.dir,trace.d8,nand.ce_n,,,,,gpio0.io14,?..."
line.long 0x3C "PIN15SEL,HPS Pinmux Select Register 15"
bitfld.long 0x3C 0.--3. " VAL          ,Select value determines which interface has been selected for IO15" "emac0.rx_ctl,usb1.data0,trace.d7,,,,,,gpio0.io15,?..."
line.long 0x40 "PIN16SEL,HPS Pinmux Select Register 16"
bitfld.long 0x40 0.--3. " VAL          ,Select value determines which interface has been selected for IO16" "emac0.txd0,usb1.data1,trace.d6,nand.adq8,,,,,gpio0.io16,?..."
line.long 0x44 "PIN17SEL,HPS Pinmux Select Register 17"
bitfld.long 0x44 0.--3. " VAL          ,Select value determines which interface has been selected for IO17" "emac0.txd1,usb1.nxt,trace.d5,nand.adq9,,,,,gpio0.io17,?..."
line.long 0x48 "PIN18SEL,HPS Pinmux Select Register 18"
bitfld.long 0x48 0.--3. " VAL          ,Select value determines which interface has been selected for IO18" "emac0.rxd0,usb1.data2,trace.d4,nand.adq10,,,,,gpio0.io18,?..."
line.long 0x4C "PIN19SEL,HPS Pinmux Select Register 19"
bitfld.long 0x4C 0.--3. " VAL          ,Select value determines which interface has been selected for IO19" "emac0.rxd1,usb1.data3,trace.clk,nand.adq11,,,,spim1.ss1_n,gpio0.io19,?..."
line.long 0x50 "PIN20SEL,HPS Pinmux Select Register 20"
bitfld.long 0x50 0.--3. " VAL          ,Select value determines which interface has been selected for IO20" "emac0.txd2,usb1.data4,trace.d0,nand.adq12,i2c1.sda,uart0.cts_n,spis0.clk,spim1.clk,gpio0.io20,?..."
line.long 0x54 "PIN21SEL,HPS Pinmux Select Register 21"
bitfld.long 0x54 0.--3. " VAL          ,Select value determines which interface has been selected for IO21" "emac0.txd3,usb1.data5,trace.d1,nand.adq13,i2c1.scl,uart0.rts_n,spis0.mosi,spim1.mosi,gpio0.io21,?..."
line.long 0x58 "PIN22SEL,HPS Pinmux Select Register 22"
bitfld.long 0x58 0.--3. " VAL          ,Select value determines which interface has been selected for IO22" "emac0.rxd2,usb1.data6,trace.d2,nand.adq14,i2c0.sda,uart0.tx,spis0.ss0_n,spim1.miso,gpio0.io22,?..."
line.long 0x5C "PIN23SEL,HPS Pinmux Select Register 23"
bitfld.long 0x5C 0.--3. " VAL          ,Select value determines which interface has been selected for IO23" "emac0.rxd3,usb1.data7,trace.d3,nand.adq15,i2c0.scl,uart0.rx,spis0.miso,spim1.ss0_n,gpio0.io23,?..."
line.long 0x60 "PIN24SEL,HPS Pinmux Select Register 24"
bitfld.long 0x60 0.--3. " VAL          ,Select value determines which interface has been selected for IO24" "emac1.tx_clk,,trace.d10,nand.adq0,,uart0.cts_n,,spim1.clk,gpio1.io0,?..."
line.long 0x64 "PIN25SEL,HPS Pinmux Select Register 25"
bitfld.long 0x64 0.--3. " VAL          ,Select value determines which interface has been selected for IO25" "emac1.tx_ctl,,trace.d9,nand.adq1,,uart0.rts_n,,spim1.mosi,gpio1.io1,?..."
line.long 0x68 "PIN26SEL,HPS Pinmux Select Register 26"
bitfld.long 0x68 0.--3. " VAL          ,Select value determines which interface has been selected for IO26" "emac1.rx_clk,,trace.d8,nand.we_n,i2c0.sda,uart0.tx,,spim1.miso,gpio1.io2,?..."
line.long 0x6C "PIN27SEL,HPS Pinmux Select Register 27"
bitfld.long 0x6C 0.--3. " VAL          ,Select value determines which interface has been selected for IO27" "emac1.rx_ctl,,trace.d7,nand.re_n,i2c0.scl,uart0.rx,,spim1.ss0_n,gpio1.io3,?..."
line.long 0x70 "PIN28SEL,HPS Pinmux Select Register 28"
bitfld.long 0x70 0.--3. " VAL          ,Select value determines which interface has been selected for IO28" "emac1.txd0,,trace.d6,nand.wp_n,,uart1.cts_n,spis1.clk,spim1.ss1_n,gpio1.io4,?..."
line.long 0x74 "PIN29SEL,HPS Pinmux Select Register 29"
bitfld.long 0x74 0.--3. " VAL          ,Select value determines which interface has been selected for IO29" "emac1.txd1,,trace.d5,nand.adq2,,uart1.rts_n,spis1.mosi,,gpio1.io5,?..."
line.long 0x78 "PIN30SEL,HPS Pinmux Select Register 30"
bitfld.long 0x78 0.--3. " VAL          ,Select value determines which interface has been selected for IO30" "emac1.rxd0,,trace.d4,nand.adq3,i2c1.sda,uart1.tx,spis1.ss0_n,,gpio1.io6,?..."
line.long 0x7C "PIN31SEL,HPS Pinmux Select Register 31"
bitfld.long 0x7C 0.--3. " VAL          ,Select value determines which interface has been selected for IO31" "emac1.rxd1,,trace.d15,nand.cle,i2c1.scl,uart1.rx,spis1.miso,,gpio1.io7,?..."
line.long 0x80 "PIN32SEL,HPS Pinmux Select Register 32"
bitfld.long 0x80 0.--3. " VAL          ,Select value determines which interface has been selected for IO32" "emac1.txd2,,trace.d14,nand.adq4,i2c_emac2.sda,mdio2.mdio,spis0.clk,jtag.tck,gpio1.io8,?..."
line.long 0x84 "PIN33SEL,HPS Pinmux Select Register 33"
bitfld.long 0x84 0.--3. " VAL          ,Select value determines which interface has been selected for IO33" "emac1.txd3,,trace.d13,nand.adq5,i2c_emac2.scl,mdio2.mdc,spis0.mosi,jtag.tms,gpio1.io9,?..."
line.long 0x88 "PIN34SEL,HPS Pinmux Select Register 34"
bitfld.long 0x88 0.--3. " VAL          ,Select value determines which interface has been selected for IO34" "emac1.rxd2,,trace.d12,nand.adq6,i2c_emac0.sda,mdio0.mdio,spis0.ss0_n,jtag.tdo,gpio1.io10,?..."
line.long 0x8C "PIN35SEL,HPS Pinmux Select Register 35"
bitfld.long 0x8C 0.--3. " VAL          ,Select value determines which interface has been selected for IO35" "emac1.rxd3,,trace.d11,nand.adq7,i2c_emac0.scl,mdio0.mdc,spis0.miso,jtag.tdi,gpio1.io11,?..."
line.long 0x90 "PIN36SEL,HPS Pinmux Select Register 36"
bitfld.long 0x90 0.--3. " VAL          ,Select value determines which interface has been selected for IO36" "emac2.tx_clk,sdmmc.data0,trace.d10,nand.ale,i2c1.sda,,,,gpio1.io12,?..."
line.long 0x94 "PIN37SEL,HPS Pinmux Select Register 37"
bitfld.long 0x94 0.--3. " VAL          ,Select value determines which interface has been selected for IO37" "emac2.tx_ctl,sdmmc.cmd,trace.d9,nand.rb,i2c1.scl,,,,gpio1.io13,?..."
line.long 0x98 "PIN38SEL,HPS Pinmux Select Register 38"
bitfld.long 0x98 0.--3. " VAL          ,Select value determines which interface has been selected for IO38" "emac2.rx_clk,sdmmc.cclk,trace.d8,nand.ce_n,,uart1.tx,,,gpio1.io14,?..."
line.long 0x9C "PIN39SEL,HPS Pinmux Select Register 39"
bitfld.long 0x9C 0.--3. " VAL          ,Select value determines which interface has been selected for IO39" "emac2.rx_ctl,sdmmc.data1,trace.d7,,,uart1.rx,,,gpio1.io15,?..."
group.long 0x100++0x01F
line.long 0x00 "PIN40SEL,HPS Pinmux Select Register 40"
bitfld.long 0x00 0.--3. " VAL          ,Select value determines which interface has been selected for IO40" "emac2.txd0,sdmmc.data2,trace.d6,nand.adq8,,uart1.cts_n,,,gpio1.io16,?..."
line.long 0x04 "PIN41SEL,HPS Pinmux Select Register 41"
bitfld.long 0x04 0.--3. " VAL          ,Select value determines which interface has been selected for IO41" "emac2.txd1,sdmmc.data3,trace.d5,nand.adq9,,uart1.rts_n,,spim0.ss1_n,gpio1.io17,?..."
line.long 0x08 "PIN42SEL,HPS Pinmux Select Register 42"
bitfld.long 0x08 0.--3. " VAL          ,Select value determines which interface has been selected for IO42" "emac2.rxd0,sdmmc.data4,trace.d4,nand.adq10,i2c_emac1.sda,mdio1.mdio,,spim0.miso,gpio1.io18,?..."
line.long 0x0C "PIN43SEL,HPS Pinmux Select Register 43"
bitfld.long 0x0C 0.--3. " VAL          ,Select value determines which interface has been selected for IO43" "emac2.rxd1,sdmmc.data5,trace.clk,nand.adq11,i2c_emac1.scl,mdio1.mdc,,spim0.ss0_n,gpio1.io19,?..."
line.long 0x10 "PIN44SEL,HPS Pinmux Select Register 44"
bitfld.long 0x10 0.--3. " VAL          ,Select value determines which interface has been selected for IO44" "emac2.txd2,sdmmc.data6,trace.d0,nand.adq12,i2c_emac2.sda,,spis1.clk,spim0.clk,gpio1.io20,?..."
line.long 0x14 "PIN45SEL,HPS Pinmux Select Register 45"
bitfld.long 0x14 0.--3. " VAL          ,Select value determines which interface has been selected for IO45" "emac2.txd3,sdmmc.data7,trace.d1,nand.adq13,i2c_emac2.scl,,spis1.mosi,spim0.mosi,gpio1.io21,?..."
line.long 0x18 "PIN46SEL,HPS Pinmux Select Register 46"
bitfld.long 0x18 0.--3. " VAL          ,Select value determines which interface has been selected for IO46" "emac2.rxd2,sdmmc.pwr_en,trace.d2,nand.adq14,i2c_emac0.sda,mdio0.mdio,spis1.ss0_n,spim0.miso,gpio1.io22,?..."
line.long 0x1C "PIN47SEL,HPS Pinmux Select Register 47"
bitfld.long 0x1C 0.--3. " VAL          ,Select value determines which interface has been selected for IO47" "emac2.rxd3,,trace.d3,nand.adq15,i2c_emac0.scl,mdio0.mdc,spis1.miso,spim0.ss0_n,gpio1.io23,?..."
tree.end
tree "HPS Pinmux Control Registers"
group.long 0x130++0x03
line.long 0x00 "IO0CTRL,HPS Pinmux Control Register 0"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO0" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO0" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO0" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO0" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO0" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO0"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO0"
group.long 0x134++0x03
line.long 0x00 "IO1CTRL,HPS Pinmux Control Register 1"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO1" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO1" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO1" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO1" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO1" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO1"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO1"
group.long 0x138++0x03
line.long 0x00 "IO2CTRL,HPS Pinmux Control Register 2"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO2" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO2" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO2" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO2" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO2" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO2"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO2"
group.long 0x13C++0x03
line.long 0x00 "IO3CTRL,HPS Pinmux Control Register 3"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO3" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO3" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO3" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO3" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO3" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO3"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO3"
group.long 0x140++0x03
line.long 0x00 "IO4CTRL,HPS Pinmux Control Register 4"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO4" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO4" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO4" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO4" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO4" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO4"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO4"
group.long 0x144++0x03
line.long 0x00 "IO5CTRL,HPS Pinmux Control Register 5"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO5" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO5" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO5" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO5" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO5" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO5"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO5"
group.long 0x148++0x03
line.long 0x00 "IO6CTRL,HPS Pinmux Control Register 6"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO6" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO6" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO6" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO6" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO6" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO6"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO6"
group.long 0x14C++0x03
line.long 0x00 "IO7CTRL,HPS Pinmux Control Register 7"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO7" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO7" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO7" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO7" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO7" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO7"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO7"
group.long 0x150++0x03
line.long 0x00 "IO8CTRL,HPS Pinmux Control Register 8"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO8" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO8" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO8" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO8" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO8" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO8"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO8"
group.long 0x154++0x03
line.long 0x00 "IO9CTRL,HPS Pinmux Control Register 9"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO9" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO9" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO9" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO9" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO9" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO9"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO9"
group.long 0x158++0x03
line.long 0x00 "IO10CTRL,HPS Pinmux Control Register 10"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO10" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO10" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO10" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO10" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO10" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO10"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO10"
group.long 0x15C++0x03
line.long 0x00 "IO11CTRL,HPS Pinmux Control Register 11"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO11" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO11" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO11" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO11" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO11" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO11"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO11"
group.long 0x160++0x03
line.long 0x00 "IO12CTRL,HPS Pinmux Control Register 12"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO12" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO12" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO12" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO12" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO12" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO12"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO12"
group.long 0x164++0x03
line.long 0x00 "IO13CTRL,HPS Pinmux Control Register 13"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO13" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO13" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO13" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO13" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO13" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO13"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO13"
group.long 0x168++0x03
line.long 0x00 "IO14CTRL,HPS Pinmux Control Register 14"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO14" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO14" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO14" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO14" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO14" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO14"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO14"
group.long 0x16C++0x03
line.long 0x00 "IO15CTRL,HPS Pinmux Control Register 15"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO15" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO15" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO15" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO15" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO15" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO15"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO15"
group.long 0x170++0x03
line.long 0x00 "IO16CTRL,HPS Pinmux Control Register 16"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO16" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO16" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO16" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO16" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO16" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO16"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO16"
group.long 0x174++0x03
line.long 0x00 "IO17CTRL,HPS Pinmux Control Register 17"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO17" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO17" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO17" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO17" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO17" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO17"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO17"
group.long 0x178++0x03
line.long 0x00 "IO18CTRL,HPS Pinmux Control Register 18"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO18" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO18" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO18" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO18" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO18" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO18"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO18"
group.long 0x17C++0x03
line.long 0x00 "IO19CTRL,HPS Pinmux Control Register 19"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO19" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO19" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO19" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO19" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO19" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO19"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO19"
group.long 0x180++0x03
line.long 0x00 "IO20CTRL,HPS Pinmux Control Register 20"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO20" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO20" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO20" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO20" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO20" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO20"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO20"
group.long 0x184++0x03
line.long 0x00 "IO21CTRL,HPS Pinmux Control Register 21"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO21" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO21" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO21" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO21" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO21" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO21"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO21"
group.long 0x188++0x03
line.long 0x00 "IO22CTRL,HPS Pinmux Control Register 22"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO22" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO22" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO22" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO22" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO22" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO22"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO22"
group.long 0x18C++0x03
line.long 0x00 "IO23CTRL,HPS Pinmux Control Register 23"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO23" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO23" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO23" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO23" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO23" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO23"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO23"
group.long 0x190++0x03
line.long 0x00 "IO24CTRL,HPS Pinmux Control Register 24"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO24" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO24" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO24" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO24" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO24" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO24"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO24"
group.long 0x194++0x03
line.long 0x00 "IO25CTRL,HPS Pinmux Control Register 25"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO25" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO25" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO25" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO25" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO25" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO25"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO25"
group.long 0x198++0x03
line.long 0x00 "IO26CTRL,HPS Pinmux Control Register 26"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO26" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO26" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO26" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO26" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO26" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO26"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO26"
group.long 0x19C++0x03
line.long 0x00 "IO27CTRL,HPS Pinmux Control Register 27"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO27" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO27" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO27" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO27" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO27" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO27"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO27"
group.long 0x200++0x03
line.long 0x00 "IO28CTRL,HPS Pinmux Control Register 28"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO28" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO28" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO28" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO28" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO28" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO28"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO28"
group.long 0x204++0x03
line.long 0x00 "IO29CTRL,HPS Pinmux Control Register 29"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO29" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO29" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO29" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO29" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO29" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO29"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO29"
group.long 0x208++0x03
line.long 0x00 "IO30CTRL,HPS Pinmux Control Register 30"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO30" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO30" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO30" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO30" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO30" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO30"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO30"
group.long 0x20C++0x03
line.long 0x00 "IO31CTRL,HPS Pinmux Control Register 31"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO31" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO31" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO31" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO31" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO31" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO31"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO31"
group.long 0x210++0x03
line.long 0x00 "IO32CTRL,HPS Pinmux Control Register 32"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO32" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO32" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO32" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO32" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO32" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO32"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO32"
group.long 0x214++0x03
line.long 0x00 "IO33CTRL,HPS Pinmux Control Register 33"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO33" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO33" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO33" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO33" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO33" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO33"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO33"
group.long 0x218++0x03
line.long 0x00 "IO34CTRL,HPS Pinmux Control Register 34"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO34" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO34" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO34" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO34" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO34" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO34"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO34"
group.long 0x21C++0x03
line.long 0x00 "IO35CTRL,HPS Pinmux Control Register 35"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO35" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO35" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO35" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO35" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO35" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO35"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO35"
group.long 0x220++0x03
line.long 0x00 "IO36CTRL,HPS Pinmux Control Register 36"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO36" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO36" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO36" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO36" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO36" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO36"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO36"
group.long 0x224++0x03
line.long 0x00 "IO37CTRL,HPS Pinmux Control Register 37"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO37" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO37" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO37" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO37" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO37" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO37"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO37"
group.long 0x228++0x03
line.long 0x00 "IO38CTRL,HPS Pinmux Control Register 38"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO38" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO38" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO38" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO38" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO38" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO38"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO38"
group.long 0x22C++0x03
line.long 0x00 "IO39CTRL,HPS Pinmux Control Register 39"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO39" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO39" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO39" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO39" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO39" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO39"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO39"
group.long 0x230++0x03
line.long 0x00 "IO40CTRL,HPS Pinmux Control Register 40"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO40" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO40" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO40" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO40" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO40" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO40"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO40"
group.long 0x234++0x03
line.long 0x00 "IO41CTRL,HPS Pinmux Control Register 41"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO41" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO41" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO41" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO41" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO41" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO41"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO41"
group.long 0x238++0x03
line.long 0x00 "IO42CTRL,HPS Pinmux Control Register 42"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO42" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO42" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO42" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO42" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO42" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO42"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO42"
group.long 0x23C++0x03
line.long 0x00 "IO43CTRL,HPS Pinmux Control Register 43"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO43" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO43" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO43" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO43" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO43" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO43"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO43"
group.long 0x240++0x03
line.long 0x00 "IO44CTRL,HPS Pinmux Control Register 44"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO44" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO44" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO44" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO44" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO44" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO44"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO44"
group.long 0x244++0x03
line.long 0x00 "IO45CTRL,HPS Pinmux Control Register 45"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO45" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO45" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO45" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO45" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO45" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO45"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO45"
group.long 0x248++0x03
line.long 0x00 "IO46CTRL,HPS Pinmux Control Register 46"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO46" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO46" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO46" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO46" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO46" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO46"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO46"
group.long 0x24C++0x03
line.long 0x00 "IO47CTRL,HPS Pinmux Control Register 47"
bitfld.long 0x00 21.--22. " WKPULL_UP_DN ,Sets control value for weak pull up and weak pull down for IO47" ",Down,Up,?..."
bitfld.long 0x00 19.--20. "               INPUT_SEL ,Sets control value to select the input source for IO47" "TTL,STTL,SCHMITT,SCHMITT"
bitfld.long 0x00 18. "   ROPDRAIN ,Sets control value for open drain for IO47" "Disabled,Enabled"
bitfld.long 0x00 17. "  RSLEWP ,Sets control value for pull up slew for IO47" "Fast,Slow"
bitfld.long 0x00 16. "  RSLEWN ,Sets control value for pull down slew for IO47" "Fast,Slow"
hexmask.long.byte 0x00 8.--15. 1. "  RPCDP ,Sets control value for pull up drive strength for IO47"
hexmask.long.byte 0x00 0.--7. 1. "  RPCDN ,Sets control value for pull down drive strength for IO47"
tree.end
newline
group.long 0x300++0x23
line.long 0x00 "PINMUX_EMAC0_USEFPGA,Register For FPGA Interface For EMAC0"
bitfld.long 0x00 0. " SEL          ,Select connection for EMAC0" "HPS IO Pins,FPGA Inteface"
line.long 0x04 "PINMUX_EMAC1_USEFPGA,Register For FPGA Interface For EMAC1"
bitfld.long 0x04 0. " SEL          ,Select connection for EMAC1" "HPS IO Pins,FPGA Inteface"
line.long 0x08 "PINMUX_EMAC2_USEFPGA,Register For FPGA Interface For EMAC2"
bitfld.long 0x08 0. " SEL          ,Select connection for EMAC2" "HPS IO Pins,FPGA Inteface"
line.long 0x0C "PINMUX_I2C0_USEFPGA,Register For FPGA Interface For I2C0"
bitfld.long 0x0C 0. " SEL          ,Select connection for I2C0" "HPS IO Pins,FPGA Inteface"
line.long 0x10 "PINMUX_I2C1_USEFPGA,Register For FPGA Interface For I2C1"
bitfld.long 0x10 0. " SEL          ,Select connection for I2C1" "HPS IO Pins,FPGA Inteface"
line.long 0x14 "PINMUX_I2C_EMAC0_USEFPGA,Register for FPGA Interface for I2C_EMAC0"
bitfld.long 0x14 0. " SEL          ,Select connection for I2C_EMAC0" "HPS IO Pins,FPGA Inteface"
line.long 0x18 "PINMUX_I2C_EMAC1_USEFPGA,Register for FPGA Interface for I2C_EMAC1"
bitfld.long 0x18 0. " SEL          ,Select connection for I2C_EMAC1" "HPS IO Pins,FPGA Inteface"
line.long 0x1C "PINMUX_I2C_EMAC2_USEFPGA,Register for FPGA Interface for I2C_EMAC2"
bitfld.long 0x1C 0. " SEL          ,Select connection for I2C_EMAC2" "HPS IO Pins,FPGA Inteface"
line.long 0x20 "PINMUX_NAND_USEFPGA,Register For FPGA Interface For NAND"
bitfld.long 0x20 0. " SEL          ,Select connection for NAND" "HPS IO Pins,FPGA Inteface"
group.long 0x328++0x23
line.long 0x00 "PINMUX_SPIM0_USEFPGA,Register For FPGA Interface For SPIM0"
bitfld.long 0x00 0. " SEL          ,Select connection for SPIM0" "HPS IO Pins,FPGA Inteface"
line.long 0x04 "PINMUX_SPIM1_USEFPGA,Register For FPGA Interface For SPIM1"
bitfld.long 0x04 0. " SEL          ,Select connection for SPIM1" "HPS IO Pins,FPGA Inteface"
line.long 0x08 "PINMUX_SPIS0_USEFPGA,Register For FPGA Interface For SPIS0"
bitfld.long 0x08 0. " SEL          ,Select connection for SPIS0" "HPS IO Pins,FPGA Inteface"
line.long 0x0C "PINMUX_SPIS1_USEFPGA,Register For FPGA Interface For SPIS1"
bitfld.long 0x0C 0. " SEL          ,Select connection for SPIS1" "HPS IO Pins,FPGA Inteface"
line.long 0x10 "PINMUX_UART0_USEFPGA,Register For FPGA Interface For UART0"
bitfld.long 0x10 0. " SEL          ,Select connection for UART0" "HPS IO Pins,FPGA Inteface"
line.long 0x14 "PINMUX_UART1_USEFPGA,Register For FPGA Interface For UART1"
bitfld.long 0x14 0. " SEL          ,Select connection for UART1" "HPS IO Pins,FPGA Inteface"
line.long 0x18 "PINMUX_MDIO0_USEFPGA,Register For FPGA Interface For MDIO0"
bitfld.long 0x18 0. " SEL          ,Select connection for MDIO0" "HPS IO Pins,FPGA Inteface"
line.long 0x1C "PINMUX_MDIO1_USEFPGA,Register For FPGA Interface For MDIO1"
bitfld.long 0x1C 0. " SEL          ,Select connection for MDIO1" "HPS IO Pins,FPGA Inteface"
line.long 0x20 "PINMUX_MDIO2_USEFPGA,Register For FPGA Interface For MDIO2"
bitfld.long 0x20 0. " SEL          ,Select connection for MDIO2" "HPS IO Pins,FPGA Inteface"
group.long 0x350++0x0B
line.long 0x00 "PINMUX_JTAG_USEFPGA,Register For FPGA Interface For JTAG"
bitfld.long 0x00 0. " SEL          ,Select connection for JTAG" "HPS IO Pins,FPGA Inteface"
line.long 0x04 "PINMUX_SDMMC_USEFPGA,Register For FPGA Interface For SDMMC"
bitfld.long 0x04 0. " SEL          ,Select connection for SDMMC" "HPS IO Pins,FPGA Inteface"
line.long 0x08 "HPS_OSC_CLK,HPS OSC CLK Source Register"
bitfld.long 0x08 0.--5. " REG          ,Select the IO from which we want to route the external oscillator clock to clock manager" "IO0,IO1,IO2,IO3,IO4,IO5,IO6,IO7,IO8,IO9,IO10,IO11,IO12,IO13,IO14,IO15,IO16,IO17,IO18,IO19,IO20,IO21,IO22,IO23,IO24,IO25,IO26,IO27,IO28,IO29,IO30,IO31,IO32,IO33,IO34,IO35,IO36,IO37,IO38,IO39,IO40,IO41,IO42,IO43,IO44,IO45,IO46,IO47,?..."
tree "IO0-IO47 Delay Chains Registers"
group.long 0x400++0x03
line.long 0x00 "IO0_DELAY,IO0 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x404++0x03
line.long 0x00 "IO1_DELAY,IO1 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x408++0x03
line.long 0x00 "IO2_DELAY,IO2 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x40C++0x03
line.long 0x00 "IO3_DELAY,IO3 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x410++0x03
line.long 0x00 "IO4_DELAY,IO4 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x414++0x03
line.long 0x00 "IO5_DELAY,IO5 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x418++0x03
line.long 0x00 "IO6_DELAY,IO6 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x41C++0x03
line.long 0x00 "IO7_DELAY,IO7 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x420++0x03
line.long 0x00 "IO8_DELAY,IO8 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x424++0x03
line.long 0x00 "IO9_DELAY,IO9 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x428++0x03
line.long 0x00 "IO10_DELAY,IO10 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x42C++0x03
line.long 0x00 "IO11_DELAY,IO11 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x430++0x03
line.long 0x00 "IO12_DELAY,IO12 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x434++0x03
line.long 0x00 "IO13_DELAY,IO13 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x438++0x03
line.long 0x00 "IO14_DELAY,IO14 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x43C++0x03
line.long 0x00 "IO15_DELAY,IO15 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x440++0x03
line.long 0x00 "IO16_DELAY,IO16 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x444++0x03
line.long 0x00 "IO17_DELAY,IO17 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x448++0x03
line.long 0x00 "IO18_DELAY,IO18 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x44C++0x03
line.long 0x00 "IO19_DELAY,IO19 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x450++0x03
line.long 0x00 "IO20_DELAY,IO20 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x454++0x03
line.long 0x00 "IO21_DELAY,IO21 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x458++0x03
line.long 0x00 "IO22_DELAY,IO22 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x45C++0x03
line.long 0x00 "IO23_DELAY,IO23 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x460++0x03
line.long 0x00 "IO24_DELAY,IO24 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x464++0x03
line.long 0x00 "IO25_DELAY,IO25 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x468++0x03
line.long 0x00 "IO26_DELAY,IO26 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x46C++0x03
line.long 0x00 "IO27_DELAY,IO27 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x470++0x03
line.long 0x00 "IO28_DELAY,IO28 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x474++0x03
line.long 0x00 "IO29_DELAY,IO29 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x478++0x03
line.long 0x00 "IO30_DELAY,IO30 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x47C++0x03
line.long 0x00 "IO31_DELAY,IO31 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x480++0x03
line.long 0x00 "IO32_DELAY,IO32 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x484++0x03
line.long 0x00 "IO33_DELAY,IO33 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x488++0x03
line.long 0x00 "IO34_DELAY,IO34 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x48C++0x03
line.long 0x00 "IO35_DELAY,IO35 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x490++0x03
line.long 0x00 "IO36_DELAY,IO36 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x494++0x03
line.long 0x00 "IO37_DELAY,IO37 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x498++0x03
line.long 0x00 "IO38_DELAY,IO38 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x49C++0x03
line.long 0x00 "IO39_DELAY,IO39 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x500++0x03
line.long 0x00 "IO40_DELAY,IO40 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x504++0x03
line.long 0x00 "IO41_DELAY,IO41 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x508++0x03
line.long 0x00 "IO42_DELAY,IO42 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x50C++0x03
line.long 0x00 "IO43_DELAY,IO43 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x510++0x03
line.long 0x00 "IO44_DELAY,IO44 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x514++0x03
line.long 0x00 "IO45_DELAY,IO45 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x518++0x03
line.long 0x00 "IO46_DELAY,IO46 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
group.long 0x51C++0x03
line.long 0x00 "IO47_DELAY,IO47 Delay Chain Register"
bitfld.long 0x00 8.--12. " OUTPUT_VAL   ,It adds the chain delays in the output path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
bitfld.long 0x00 0.--4. "       INPUT_VAL ,It adds the chain delays in the input path of the pinmux" "Bypassed,Minimum,,+1,,+2,,+3,,+4,,+5,,+6,,+7,,+8,,+9,,+10,,+11,,+12,,+13,,+14,,+15"
tree.end
width 0x0B
tree.end
tree.open "NAND"
tree "NAND_CONFIG (NAND Configuration Registers)"
base ad:0xFFB80000
width 27.
group.long 0x10++0x03
line.long 0x00 "TRANSFER_SPARE_REG,Default Data Transfer Mode"
bitfld.long 0x00 0. " FLAG                  ,Additionally transfer data in spare area of memory enable" "Disabled,Enabled"
group.long 0x20++0x03
line.long 0x00 "LOAD_WAIT_CNT,Wait Count Value For Load Operation"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Number of clock cycles after issue of load operation before cadence NAND flash controller polls for status"
group.long 0x30++0x03
line.long 0x00 "PROGRAM_WAIT_CNT,Wait Count Value For Program Operation"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Number of clock cycles after issue of program operation before cadence NAND flash controller polls for status"
group.long 0x40++0x03
line.long 0x00 "ERASE_WAIT_CNT,Wait Count Value For Erase Operation"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Number of clock cycles after issue of erase operation before cadence NAND flash controller polls for status"
group.long 0x50++0x03
line.long 0x00 "INT_MON_CYCCNT,Interrupt Monitor Cycle Count Value"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,In polling mode sets the number of cycles cadence flash controller must wait before checking the status register"
group.long 0x60++0x03
line.long 0x00 "RB_PIN_ENABLED,Interrupt Or Polling Mode"
bitfld.long 0x00 3. " BANK3                 ,Sets cadence flash controller for bank 3 in interrupt pin or polling mode" "Interrupt pin,Polling"
bitfld.long 0x00 2. "  BANK2           ,Sets cadence flash controller for bank 2 in interrupt pin or polling mode" "Interrupt pin,Polling"
bitfld.long 0x00 1. "  BANK1 ,Sets cadence flash controller for bank 1 in interrupt pin or polling mode" "Interrupt pin,Polling"
bitfld.long 0x00 0. "  BANK0 ,Sets cadence flash controller for bank 0 in interrupt pin or polling mode" "Interrupt pin,Polling"
group.long 0x70++0x03
line.long 0x00 "MULTIPLANE_OPERATION,Multiplane Transfer Mode"
bitfld.long 0x00 0. " FLAG                  ,Multiplane operation enable" "Disabled,Enabled"
group.long 0x80++0x03
line.long 0x00 "MULTIPLANE_READ_ENABLE,Multiplane Read Enable"
bitfld.long 0x00 0. " FLAG                  ,Device supports multiplane read sequence" "No,Yes"
group.long 0x90++0x03
line.long 0x00 "COPYBACK_DISABLE,Copyback Disable"
bitfld.long 0x00 0. " FLAG                  ,Copyback disable" "No,Yes"
group.long 0xA0++0x03
line.long 0x00 "CACHE_WRITE_ENABLE,Cache Write Enable"
bitfld.long 0x00 0. " FLAG                  ,Cache write support" "Not supported,Supported"
group.long 0xB0++0x03
line.long 0x00 "CACHE_READ_ENABLE,Cache Read Enable"
bitfld.long 0x00 0. " FLAG                  ,Cache read supported" "Not supported,Supported"
group.long 0xC0++0x03
line.long 0x00 "PREFETCH_MODE,Prefetch Mode"
hexmask.long.word 0x00 4.--15. 1. " PREFETCH_BURST_LENGTH ,Prefetch burst length in bytes"
bitfld.long 0x00 0. "           PREFETCH_EN     ,Prefetch of data enable" "Disabled,Enabled"
group.long 0xD0++0x03
line.long 0x00 "CHIP_ENABLE_DONT_CARE,Chip Enable Do Not Care"
bitfld.long 0x00 0. " FLAG                  ,Dont care mode enable" "Disabled,Enabled"
group.long 0xE0++0x03
line.long 0x00 "ECC_ENABLE,ECC Enable"
bitfld.long 0x00 0. " FLAG                  ,ECC check bit generation and correction enable" "Disabled,Enabled"
group.long 0xF0++0x03
line.long 0x00 "GLOBAL_INT_ENABLE,Global Interrupt Enable And Error/Timeout Disable"
bitfld.long 0x00 8. " ERROR_RPT_DISABLE     ,Command and ECC uncorrectable failures report disable" "No,Yes"
bitfld.long 0x00 4. "            TIMEOUT_DISABLE ,Watchdog timer disable" "No,Yes"
bitfld.long 0x00 0. "            FLAG  ,Interrupt enable" "Disabled,Enabled"
group.long 0x100++0x03
line.long 0x00 "TWHR2_AND_WE_2_RE,TWHR2_AND_WE_2_RE"
bitfld.long 0x00 8.--13. " TWHR2                 ,Signifies the number of controller clocks introduced between the last command of a random data output command to the start of the data transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--5. "             WE_2_RE         ,Signifies the number of bus interface clk_x clocks that should be introduced between write enable going high to read enable going low" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x110++0x03
line.long 0x00 "TCWAW_AND_ADDR_2_DATA,TCWAW_AND_ADDR_2_DATA"
bitfld.long 0x00 8.--13. " TCWAW                 ,Signifies the number of controller clocks introduced between the command cycle of a random data input command to the address cycle of the random data input command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x00 0.--6. 1. "             ADDR_2_DATA     ,Signifies the number of bus interface clk_x clocks that should be introduced between an address to a data input cycle"
group.long 0x120++0x03
line.long 0x00 "RE_2_WE,RE_2_WE"
bitfld.long 0x00 0.--5. " VALUE                 ,Signifies the number of bus interface clk_x clocks introduced between read enable going high to write enable going low" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x130++0x03
line.long 0x00 "ACC_CLKS,ACC_CLKS"
bitfld.long 0x00 0.--3. " VALUE                 ,Signifies the number of bus interface clk_x clock cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x140++0x03
line.long 0x00 "NUMBER_OF_PLANES,Number Of Planes"
bitfld.long 0x00 0.--2. " VALUE                 ,Number of planes" "1,2,,4,,,,8"
group.long 0x150++0x03
line.long 0x00 "PAGES_PER_BLOCK,Pages Per Block"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Pages per block"
group.long 0x160++0x03
line.long 0x00 "DEVICE_WIDTH,Device Width"
bitfld.long 0x00 0.--1. " VALUE                 ,Device width" "8 bit,16 bit,?..."
group.long 0x170++0x03
line.long 0x00 "DEVICE_MAIN_AREA_SIZE,Device Main Area Size"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Page main area size of device in bytes"
group.long 0x180++0x03
line.long 0x00 "DEVICE_SPARE_AREA_SIZE,Device Spare Area Size"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Page spare area size of device in bytes"
group.long 0x190++0x03
line.long 0x00 "TWO_ROW_ADDR_CYCLES,Two Row Address Cycles"
bitfld.long 0x00 4. " FOUR                  ,Four row address cycles enable" "Disabled,Enabled"
bitfld.long 0x00 2. "       FLAG            ,Two row address cycles enable" "Disabled,Enabled"
group.long 0x1A0++0x03
line.long 0x00 "MULTIPLANE_ADDR_RESTRICT,Multiplane Address Restriction"
bitfld.long 0x00 0. " FLAG                  ,Multiplane address restriction enable" "Disabled,Enabled"
group.long 0x1B0++0x03
line.long 0x00 "ECC_CORRECTION,Correction Capability Required And The Erase Threshold Value"
hexmask.long.word 0x00 16.--31. 1. " ERASE_THRESHOLD       ,This value informs the ECC logic of the number of 0's to count in a page before considering it as erased"
hexmask.long.byte 0x00 0.--7. 1. "           VALUE           ,The required correction capability"
tree "Controller Sequences Registers"
group.long 0x1C0++0x03
line.long 0x00 "READ_MODE,Read Mode"
bitfld.long 0x00 0.--3. "VALUE     ,The type of read sequence that the controller will follow for pipe read commands" "C00/Address/Data/...,C00/Address/C30/C31/Data/C31/Data/.../C3F/Data,C00/Address/C31/Data/Data/...../C34,C00/Address/C00/Address/C30/Data/C06/Address/CE0/Data,C60/Address/C60/Address/C30/C00/Address/C05/Address/CE0/Data/C00/Address/C05/Address/CE0/Data,C60/Address/C60/Address/C30/C31/C00/Address/C05/Address/CE0/Data/C00/Address/C05/Address/CE0/Data/...,C00/Address/C32/.../C00/Address/C30/C06/Address/CE0/Data/C06/Address/CE0/Data,C00/Address/C32/.../C00/Address/C30/C31,C06/Address/CE0/Data/...,C60/Address/C60/Address/C33/C31/C00/Address/C05/Address/CE0/Data/C00/Address,?..."
group.long 0x1D0++0x03
line.long 0x00 "WRITE_MODE,Write Mode"
bitfld.long 0x00 0.--3. "VALUE     ,The type of write sequence that the controller will follow for pipe write commands" "C80/Address/Data/C10/...,C80/Address/Data/C15/.../C80/Address/Data/C10,C80/Address/Data/C11/C81/Address/Data/C10/...,C80/Address/Data/C11/C80/Address/Data/C10/...,C80/Address/Data/C11/C80/Address/Data/C15/.../C80/Address/Data/C11/C80/Address/Data/C10,C80/Address/Data/C11/C81/Address/Data/C15/.../C80/Address/Data/C11/C81/Address/Data/C10,?..."
group.long 0x1E0++0x03
line.long 0x00 "COPYBACK_MODE,Copyback Mode"
bitfld.long 0x00 0.--3. "VALUE     ,The type of copyback sequence that the controller will follow" "C00/Address/C35/C85/Address/C10,C00/Address/C30/C8C/Address/C10,C00/Address/C8A/Address/C10,C00/Address/C03/Address/C03/Address/C03/Address/C8A/Address/C11/C8A/Address/C11/C8A/Address/C11/C8A/Address/C10,C00/Address/C35/C00/Address/C35/C85/Address/C11/C81/Address/C10,C60/Address/C60/Address/C35/C85/Address/C11/C81/Address/C10,C00/Address/C00/Address/C35/C85/Address/C11/C80/Address/C10,C60/Address/C60/Address/C30/C8C/Address/C11/C8C/Address/C10,?..."
tree.end
newline
group.long 0x1F0++0x03
line.long 0x00 "RDWR_EN_LO_CNT,Read/Write Enable Low Pulse Width"
bitfld.long 0x00 0.--4. " VALUE                 ,Number of clk_x cycles that read or write enable will kept low to meet the min Trp/Twp parameter of the device" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x200++0x03
line.long 0x00 "RDWR_EN_HI_CNT,Read/Write Enable High Pulse Width"
bitfld.long 0x00 0.--4. " VALUE                 ,Number of clk_x cycles that read or write enable will kept high to meet the min Trp/Twp parameter of the device" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x210++0x03
line.long 0x00 "MAX_RD_DELAY,Max Round Trip Read Data Delay For Data Capture"
bitfld.long 0x00 0.--3. " VALUE                 ,Number of clk_x cycles after generation of feedback clk_x_out pulse when it is safe to synchronize received data to clk_x domain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x220++0x03
line.long 0x00 "CS_SETUP_CNT,Chip select Setup/tWB Time"
bitfld.long 0x00 12.--17. " TWB                   ,Number of clk_x cycles required for meeting the tWB time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--4. "             VALUE           ,Number of clk_x cycles required for meeting chip select setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x230++0x03
line.long 0x00 "SPARE_AREA_SKIP_BYTES,Spare Area Skip Bytes"
bitfld.long 0x00 0.--5. " VALUE                 ,Number of bytes to skip from start of spare area before last ECC sector data starts" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x240++0x03
line.long 0x00 "SPARE_AREA_MARKER,Spare Area Marker Value"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,A 16bit value that will be written in the spare area skip bytes"
group.long 0x250++0x03
line.long 0x00 "DEVICES_CONNECTED,Number of Devices Connected On One Bank"
bitfld.long 0x00 0.--2. " VALUE                 ,Indicates the number of devices connected to a bank" "0,1,2,3,4,5,6,7"
group.long 0x260++0x03
line.long 0x00 "DIE_MASK,Device With Stacked Dies Indicator"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Value used to mask the address while sending out the last row address in devices with multiple dies stacked"
group.long 0x270++0x03
line.long 0x00 "FIRST_BLOCK_OF_NEXT_PLANE,First Block Of The Next Plane"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,This values informs the controller of the plane structure of the device"
group.long 0x280++0x03
line.long 0x00 "WRITE_PROTECT,WP# Pin Assertion/de-assertion Control"
bitfld.long 0x00 0. " FLAG                  ,WP# pin assertion/de-assertion control" "Asserted,De-asserted"
group.long 0x290++0x03
line.long 0x00 "RE_2_RE,Next Bank Read Enable Timing Parameter"
bitfld.long 0x00 0.--5. " VALUE                 ,Signifies the number of bus interface clk_x clocks that should be introduced between read enable going high to a bank to the read enable going low to the next bank" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x2A0++0x03
line.long 0x00 "POR_RESET_COUNT,POR Reset Count"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Number of cycles to wait before issuing the first RESET command to the device"
group.long 0x2B0++0x03
line.long 0x00 "WATCHDOG_RESET_COUNT,Watchdog Reset Count"
hexmask.long.word 0x00 0.--15. 1. " VALUE                 ,Number of cycles to wait before issuing a watchdog timeout interrupt"
group.long 0x00++0x03
line.long 0x00 "DEVICE_RESET,Device Reset"
bitfld.long 0x00 3. " BANK3                 ,Issues reset to bank 3" "No reset,Reset"
bitfld.long 0x00 2. "       BANK2           ,Issues reset to bank 2" "No reset,Reset"
bitfld.long 0x00 1. "       BANK1 ,Issues reset to bank 1" "No reset,Reset"
bitfld.long 0x00 0. "       BANK0 ,Issues reset to bank 0" "No reset,Reset"
width 0x0B
tree.end
tree "NAND_PARAM (NAND Parameters Registers)"
base ad:0xFFB80300
width 36.
rgroup.long 0x00++0x03
line.long 0x00 "MANUFACTURER_ID,Manufacturer ID"
hexmask.long.byte 0x00 0.--7. 1. " VALUE                               ,Manufacturer ID"
rgroup.long 0x10++0x03
line.long 0x00 "DEVICE_ID,Device ID"
hexmask.long.byte 0x00 0.--7. 1. " VALUE                               ,Device ID"
rgroup.long 0x20++0x03
line.long 0x00 "DEVICE_PARAM_0,Device Parameter 0"
hexmask.long.byte 0x00 0.--7. 1. " VALUE                               ,3rd byte relating to device signature"
rgroup.long 0x30++0x03
line.long 0x00 "DEVICE_PARAM_1,Device Parameter 1"
hexmask.long.byte 0x00 0.--7. 1. " VALUE                               ,4th byte relating to device signature"
rgroup.long 0x50++0x03
line.long 0x00 "LOGICAL_PAGE_DATA_SIZE,Logical Page Data Area Size"
hexmask.long.word 0x00 0.--15. 1. " VALUE                               ,Logical page data area size in bytes"
rgroup.long 0x60++0x03
line.long 0x00 "LOGICAL_PAGE_SPARE_SIZE,Logical Page Spare Area Size"
hexmask.long.word 0x00 0.--15. 1. " VALUE                               ,Logical page spare area size in bytes"
rgroup.long 0x70++0x03
line.long 0x00 "REVISION,Controller Revision"
hexmask.long.byte 0x00 8.--15. 1. " VALUE                               ,The minor revision number of the controller"
hexmask.long.byte 0x00 0.--7. 1. "             VALUE                           ,The major revision number of the controller"
rgroup.long 0x80++0x03
line.long 0x00 "ONFI_DEVICE_FEATURES,ONFI Device Features"
bitfld.long 0x00 12. " VALUE[12]                           ,External Vpp support" "Not supported,Supported"
bitfld.long 0x00 11. "  [11]                            ,Volume Addressing support" "Not supported,Supported"
newline
bitfld.long 0x00 10. " [10]                                ,NV-DDR2 support" "Not supported,Supported"
bitfld.long 0x00 9. "  [9]                             ,EZNAND support" "Not supported,Supported"
newline
bitfld.long 0x00 8. " [8]                                 ,Program page register clear enhancement support" "Not supported,Supported"
bitfld.long 0x00 7. "  [7]                             ,Extended parameter page support" "Not supported,Supported"
newline
bitfld.long 0x00 6. " [6]                                 ,Interleaved read operations support" "Not supported,Supported"
bitfld.long 0x00 5. "  [5]                             ,Synchronous source support" "Not supported,Supported"
newline
bitfld.long 0x00 4. " [4]                                 ,Odd to even page copyback support" "Not supported,Supported"
bitfld.long 0x00 3. "  [3]                             ,Interleaved program and erase operations support" "Not supported,Supported"
newline
bitfld.long 0x00 2. " [2]                                 ,Non-sequential page programming support" "Not supported,Supported"
bitfld.long 0x00 1. "  [1]                             ,Multiple LUN operations support" "Not supported,Supported"
newline
bitfld.long 0x00 0. " [0]                                 ,16 bit data bus width support" "Not supported,Supported"
rgroup.long 0x90++0x03
line.long 0x00 "ONFI_OPTIONAL_COMMANDS,ONFI Optional Commands"
bitfld.long 0x00 11. " VALUE[11]                           ,ODT Configure support" "Not supported,Supported"
bitfld.long 0x00 10. "  [10]                            ,Volume select support" "Not supported,Supported"
newline
bitfld.long 0x00 9. " [9]                                 ,RESET LUN support" "Not supported,Supported"
bitfld.long 0x00 8. "  [8]                             ,Change small data move support" "Not supported,Supported"
newline
bitfld.long 0x00 7. " [7]                                 ,Change row address support" "Not supported,Supported"
bitfld.long 0x00 6. "  [6]                             ,Change read column enhanced support" "Not supported,Supported"
newline
bitfld.long 0x00 5. " [5]                                 ,Read Unique ID support" "Not supported,Supported"
bitfld.long 0x00 4. "  [4]                             ,Copyback support" "Not supported,Supported"
newline
bitfld.long 0x00 3. " [3]                                 ,Read status enhanced commands support" "Not supported,Supported"
bitfld.long 0x00 2. "  [2]                             ,Get and set features support" "Not supported,Supported"
newline
bitfld.long 0x00 1. " [1]                                 ,Read cache commands support" "Not supported,Supported"
bitfld.long 0x00 0. "  [0]                             ,Page cache program command" "Not supported,Supported"
rgroup.long 0xA0++0x03
line.long 0x00 "ONFI_TIMING_MODE,ONFI Timing Mode"
bitfld.long 0x00 5. " VALUE[5]                            ,Asynchronous timing mode 5 support" "Not supported,Supported"
bitfld.long 0x00 4. "  [4]                             ,Asynchronous timing mode 4 support" "Not supported,Supported"
newline
bitfld.long 0x00 3. " [3]                                 ,Asynchronous timing mode 3 support" "Not supported,Supported"
bitfld.long 0x00 2. "  [2]                             ,Asynchronous timing mode 2 support" "Not supported,Supported"
newline
bitfld.long 0x00 1. " [1]                                 ,Asynchronous timing mode 1 support" "Not supported,Supported"
bitfld.long 0x00 0. "  [0]                             ,Asynchronous timing mode 0 support" "Not supported,Supported"
rgroup.long 0xB0++0x03
line.long 0x00 "ONFI_PGM_CACHE_TIMING_MODE,ONFI Program Cache Timing Mode"
bitfld.long 0x00 5. " VALUE[5]                            ,Asynchronous program cache timing mode 5 support" "Not supported,Supported"
bitfld.long 0x00 4. "  [4]                             ,Asynchronous program cache timing mode 4 support" "Not supported,Supported"
newline
bitfld.long 0x00 3. " [3]                                 ,Asynchronous program cache timing mode 3 support" "Not supported,Supported"
bitfld.long 0x00 2. "  [2]                             ,Asynchronous program cache timing mode 2 support" "Not supported,Supported"
newline
bitfld.long 0x00 1. " [1]                                 ,Asynchronous program cache timing mode 1 support" "Not supported,Supported"
bitfld.long 0x00 0. "  [0]                             ,Asynchronous program cache timing mode 0 support" "Not supported,Supported"
group.long 0xC0++0x03
line.long 0x00 "ONFI_DEVICE_NO_OF_LUNS,ONFI Compilant Indication And Number of LUNS Present Register"
bitfld.long 0x00 20. " CE_REDUCTION_VOLUME_ADDR_AND_CHANGE ,CE pin reduction with volume assignments and volume addressing and volume change command sequence support" "Not supported,Supported"
bitfld.long 0x00 16. "  ONFI_JEDEC_MULTIPLANE_ERASE_SEQ ,ONFI JEDEC multiplane erase sequence support" "Not supported,Supported"
newline
bitfld.long 0x00 12. " PROG_PAGE_REG_CLEAR_ENHANCEMENT     ,Program page register clear enhancement support" "Not supported,Supported"
bitfld.long 0x00 8. "  ONFI_DEVICE                     ,Indicates if the device is an ONFI compliant device" "Non-ONFI compliant,ONFI compliant"
newline
hexmask.long.byte 0x00 0.--7. 1. " NO_OF_LUNS                          ,Indicates the number of LUNS present in the device"
rgroup.long 0xD0++0x03
line.long 0x00 "ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L,Lower bits of number of blocks per LUN present in the ONFI complaint device"
hexmask.long.word 0x00 0.--15. 1. " VALUE                               ,Indicates the lower bits of number of blocks per LUN present in the ONFI complaint device"
rgroup.long 0xE0++0x03
line.long 0x00 "ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U,Upper bits of number of blocks per LUN present in the ONFI complaint device"
hexmask.long.word 0x00 0.--15. 1. " VALUE                               ,Indicates the upper bits of number of blocks per LUN present in the ONFI complaint device"
rgroup.long 0xF0++0x03
line.long 0x00 "FEATURES,Available Hardware Features"
bitfld.long 0x00 13. " LBA                                 ,Toshiba LBA devices support" "Not supported,Supported"
bitfld.long 0x00 12. "  DFI_INTF                        ,ONFI2.x synchronous interface support" "Not supported,Supported"
newline
bitfld.long 0x00 11. " INDEX_ADDR                          ,Only Indexed addressing support" "Not supported,Supported"
bitfld.long 0x00 10. "  GPREG                           ,General purpose registers present in hardware" "Not present,Present"
newline
bitfld.long 0x00 9. " XDMA_SIDEBAND                       ,Sideband DMA present in hardware" "Not present,Present"
bitfld.long 0x00 8. "    PARTITION                       ,Partition logic present in hardware" "Not present,Present"
newline
bitfld.long 0x00 7. " CMD_DMA                             ,CMD-DMA present in hardware" "Not present,Present"
bitfld.long 0x00 6. "    DMA                             ,DATA-DMA present in hardware" "Not present,Present"
newline
bitfld.long 0x00 0.--1. " N_BANKS                             ,Maximum number of banks supported by hardware" "1,2,4,8"
width 0x0B
tree.end
tree "NAND_STATUS (NAND Status Registers)"
base ad:0xFFB80400
width 17.
rgroup.long 0x00++0x03
line.long 0x00 "TRANSFER_MODE,Transfer Mode"
bitfld.long 0x00 6.--7. "   VALUE3       ,Bank 3 transfer mode" ",Spare,Main+Spare,?..."
bitfld.long 0x00 4.--5. "    VALUE2        ,Bank 2 transfer mode" ",Spare,Main+Spare,?..."
bitfld.long 0x00 2.--3. "    VALUE1       ,Bank 1 transfer mode" ",Spare,Main+Spare,?..."
bitfld.long 0x00 0.--1. "    VALUE0               ,Bank 0 transfer mode" ",Spare,Main+Spare,?..."
tree "Bank 0 Registers"
group.long (0x10+0x0)++0x03
line.long 0x00 "INTR_STATUS0,Interrupt Status Register For Bank 0"
bitfld.long 0x00 16. " ERASED_PAGE  ,Erased page detected on reads" "No interrupt,Interrupt"
bitfld.long 0x00 15. "  PAGE_XFER_INC ,Page of data transfered to or from the device" "No interrupt,Interrupt"
bitfld.long 0x00 14. "  PIPE_CMD_ERR ,Pipeline command sequence violated" "No interrupt,Interrupt"
bitfld.long 0x00 13. "  RST_COMP             ,Controller has finished reset and initialization process" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " INT_ACT      ,R/B pin of device transitioned from low to high" "No interrupt,Interrupt"
bitfld.long 0x00 11. "  UNSUP_CMD     ,An unsupported command received" "No interrupt,Interrupt"
bitfld.long 0x00 10. "  LOCKED_BLK   ,The address to program or erase operation is to a locked block and the operation failed" "No interrupt,Interrupt"
bitfld.long 0x00 9. "  PIPE_CPYBCK_CMD_COMP ,A pipeline command or a copyback bank command has completed on this particular bank" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " ERASE_COMP   ,Device erase operation complete" "No interrupt,Interrupt"
bitfld.long 0x00 7. "  PROGRAM_COMP  ,Device finished the last issued program command" "No interrupt,Interrupt"
bitfld.long 0x00 6. "  LOAD_COMP    ,Device finished the last issued load command" "No interrupt,Interrupt"
bitfld.long 0x00 5. "  ERASE_FAIL           ,Erase failure occurred in the device on issuance of a erase command" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure occurred in the device on issuance of a program command" "No interrupt,Interrupt"
bitfld.long 0x00 3. "  TIME_OUT      ,Watchdog timer has triggered in the controller due to one of the reasons like device not responding or controller state machine did not get back to idle" "No interrupt,Interrupt"
bitfld.long 0x00 2. "  DMA_CMD_COMP ,A data DMA command has completed on this bank" "No interrupt,Interrupt"
bitfld.long 0x00 0. "  ECC_UNCOR_ERR        ,Ecc logic detected uncorrectable error while reading data from flash device" "No interrupt,Interrupt"
group.long (0x20+0x0)++0x03
line.long 0x00 "INTR_EN0,Interrupt Enable Register For Bank 0"
bitfld.long 0x00 16. " ERASED_PAGE  ,Erased page detected on reads" "Disabled,Enabled"
bitfld.long 0x00 15. "      PAGE_XFER_INC ,Page of data transfered to or from the device" "Disabled,Enabled"
bitfld.long 0x00 14. "      PIPE_CMD_ERR ,Pipeline command sequence violated" "Disabled,Enabled"
bitfld.long 0x00 13. "      RST_COMP             ,Controller has finished reset and initialization process" "Disabled,Enabled"
newline
bitfld.long 0x00 12. " INT_ACT      ,R/B pin of device transitioned from low to high" "Disabled,Enabled"
bitfld.long 0x00 11. "      UNSUP_CMD     ,An unsupported command received" "Disabled,Enabled"
bitfld.long 0x00 10. "      LOCKED_BLK   ,The address to program or erase operation is to a locked block and the operation failed" "Disabled,Enabled"
bitfld.long 0x00 9. "      PIPE_CPYBCK_CMD_COMP ,A pipeline command or a copyback bank command has completed on this particular bank" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " ERASE_COMP   ,Device erase operation complete" "Disabled,Enabled"
bitfld.long 0x00 7. "      PROGRAM_COMP  ,Device finished the last issued program command" "Disabled,Enabled"
bitfld.long 0x00 6. "      LOAD_COMP    ,Device finished the last issued load command" "Disabled,Enabled"
bitfld.long 0x00 5. "      ERASE_FAIL           ,Erase failure occurred in the device on issuance of a erase command" "Disabled,Enabled"
newline
bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure occurred in the device on issuance of a program command" "Disabled,Enabled"
bitfld.long 0x00 3. "      TIME_OUT      ,Watchdog timer has triggered in the controller due to one of the reasons like device not responding or controller state machine did not get back to idle" "Disabled,Enabled"
bitfld.long 0x00 2. "      DMA_CMD_COMP ,A data DMA command has completed on this bank" "Disabled,Enabled"
bitfld.long 0x00 0. "      ECC_UNCOR_ERR        ,Ecc logic detected uncorrectable error while reading data from flash device" "Disabled,Enabled"
rgroup.long (0x30+0x0)++0x03
line.long 0x00 "PAGE_CNT0,Decrementing Page Count Bank 0"
hexmask.long.byte 0x00 0.--7. 1. " VALUE        ,Maintains a decrementing count of the number of pages in the multi-page (pipeline and copyback) command being executed"
rgroup.long (0x40+0x0)++0x03
line.long 0x00 "ERR_PAGE_ADDR0,Erred Page Address Bank 0"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE        ,Holds the page address that resulted in a failure on program or erase operation"
rgroup.long (0x50+0x0)++0x03
line.long 0x00 "ERR_BLOCK_ADDR0,Erred Block Address Bank 0"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE        ,Holds the block address that resulted in a failure on program or erase operation"
tree.end
tree "Bank 1 Registers"
group.long (0x10+0x50)++0x03
line.long 0x00 "INTR_STATUS1,Interrupt Status Register For Bank 1"
bitfld.long 0x00 16. " ERASED_PAGE  ,Erased page detected on reads" "No interrupt,Interrupt"
bitfld.long 0x00 15. "  PAGE_XFER_INC ,Page of data transfered to or from the device" "No interrupt,Interrupt"
bitfld.long 0x00 14. "  PIPE_CMD_ERR ,Pipeline command sequence violated" "No interrupt,Interrupt"
bitfld.long 0x00 13. "  RST_COMP             ,Controller has finished reset and initialization process" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " INT_ACT      ,R/B pin of device transitioned from low to high" "No interrupt,Interrupt"
bitfld.long 0x00 11. "  UNSUP_CMD     ,An unsupported command received" "No interrupt,Interrupt"
bitfld.long 0x00 10. "  LOCKED_BLK   ,The address to program or erase operation is to a locked block and the operation failed" "No interrupt,Interrupt"
bitfld.long 0x00 9. "  PIPE_CPYBCK_CMD_COMP ,A pipeline command or a copyback bank command has completed on this particular bank" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " ERASE_COMP   ,Device erase operation complete" "No interrupt,Interrupt"
bitfld.long 0x00 7. "  PROGRAM_COMP  ,Device finished the last issued program command" "No interrupt,Interrupt"
bitfld.long 0x00 6. "  LOAD_COMP    ,Device finished the last issued load command" "No interrupt,Interrupt"
bitfld.long 0x00 5. "  ERASE_FAIL           ,Erase failure occurred in the device on issuance of a erase command" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure occurred in the device on issuance of a program command" "No interrupt,Interrupt"
bitfld.long 0x00 3. "  TIME_OUT      ,Watchdog timer has triggered in the controller due to one of the reasons like device not responding or controller state machine did not get back to idle" "No interrupt,Interrupt"
bitfld.long 0x00 2. "  DMA_CMD_COMP ,A data DMA command has completed on this bank" "No interrupt,Interrupt"
bitfld.long 0x00 0. "  ECC_UNCOR_ERR        ,Ecc logic detected uncorrectable error while reading data from flash device" "No interrupt,Interrupt"
group.long (0x20+0x50)++0x03
line.long 0x00 "INTR_EN1,Interrupt Enable Register For Bank 1"
bitfld.long 0x00 16. " ERASED_PAGE  ,Erased page detected on reads" "Disabled,Enabled"
bitfld.long 0x00 15. "      PAGE_XFER_INC ,Page of data transfered to or from the device" "Disabled,Enabled"
bitfld.long 0x00 14. "      PIPE_CMD_ERR ,Pipeline command sequence violated" "Disabled,Enabled"
bitfld.long 0x00 13. "      RST_COMP             ,Controller has finished reset and initialization process" "Disabled,Enabled"
newline
bitfld.long 0x00 12. " INT_ACT      ,R/B pin of device transitioned from low to high" "Disabled,Enabled"
bitfld.long 0x00 11. "      UNSUP_CMD     ,An unsupported command received" "Disabled,Enabled"
bitfld.long 0x00 10. "      LOCKED_BLK   ,The address to program or erase operation is to a locked block and the operation failed" "Disabled,Enabled"
bitfld.long 0x00 9. "      PIPE_CPYBCK_CMD_COMP ,A pipeline command or a copyback bank command has completed on this particular bank" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " ERASE_COMP   ,Device erase operation complete" "Disabled,Enabled"
bitfld.long 0x00 7. "      PROGRAM_COMP  ,Device finished the last issued program command" "Disabled,Enabled"
bitfld.long 0x00 6. "      LOAD_COMP    ,Device finished the last issued load command" "Disabled,Enabled"
bitfld.long 0x00 5. "      ERASE_FAIL           ,Erase failure occurred in the device on issuance of a erase command" "Disabled,Enabled"
newline
bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure occurred in the device on issuance of a program command" "Disabled,Enabled"
bitfld.long 0x00 3. "      TIME_OUT      ,Watchdog timer has triggered in the controller due to one of the reasons like device not responding or controller state machine did not get back to idle" "Disabled,Enabled"
bitfld.long 0x00 2. "      DMA_CMD_COMP ,A data DMA command has completed on this bank" "Disabled,Enabled"
bitfld.long 0x00 0. "      ECC_UNCOR_ERR        ,Ecc logic detected uncorrectable error while reading data from flash device" "Disabled,Enabled"
rgroup.long (0x30+0x50)++0x03
line.long 0x00 "PAGE_CNT1,Decrementing Page Count Bank 1"
hexmask.long.byte 0x00 0.--7. 1. " VALUE        ,Maintains a decrementing count of the number of pages in the multi-page (pipeline and copyback) command being executed"
rgroup.long (0x40+0x50)++0x03
line.long 0x00 "ERR_PAGE_ADDR1,Erred Page Address Bank 1"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE        ,Holds the page address that resulted in a failure on program or erase operation"
rgroup.long (0x50+0x50)++0x03
line.long 0x00 "ERR_BLOCK_ADDR1,Erred Block Address Bank 1"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE        ,Holds the block address that resulted in a failure on program or erase operation"
tree.end
tree "Bank 2 Registers"
group.long (0x10+0xA0)++0x03
line.long 0x00 "INTR_STATUS2,Interrupt Status Register For Bank 2"
bitfld.long 0x00 16. " ERASED_PAGE  ,Erased page detected on reads" "No interrupt,Interrupt"
bitfld.long 0x00 15. "  PAGE_XFER_INC ,Page of data transfered to or from the device" "No interrupt,Interrupt"
bitfld.long 0x00 14. "  PIPE_CMD_ERR ,Pipeline command sequence violated" "No interrupt,Interrupt"
bitfld.long 0x00 13. "  RST_COMP             ,Controller has finished reset and initialization process" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " INT_ACT      ,R/B pin of device transitioned from low to high" "No interrupt,Interrupt"
bitfld.long 0x00 11. "  UNSUP_CMD     ,An unsupported command received" "No interrupt,Interrupt"
bitfld.long 0x00 10. "  LOCKED_BLK   ,The address to program or erase operation is to a locked block and the operation failed" "No interrupt,Interrupt"
bitfld.long 0x00 9. "  PIPE_CPYBCK_CMD_COMP ,A pipeline command or a copyback bank command has completed on this particular bank" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " ERASE_COMP   ,Device erase operation complete" "No interrupt,Interrupt"
bitfld.long 0x00 7. "  PROGRAM_COMP  ,Device finished the last issued program command" "No interrupt,Interrupt"
bitfld.long 0x00 6. "  LOAD_COMP    ,Device finished the last issued load command" "No interrupt,Interrupt"
bitfld.long 0x00 5. "  ERASE_FAIL           ,Erase failure occurred in the device on issuance of a erase command" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure occurred in the device on issuance of a program command" "No interrupt,Interrupt"
bitfld.long 0x00 3. "  TIME_OUT      ,Watchdog timer has triggered in the controller due to one of the reasons like device not responding or controller state machine did not get back to idle" "No interrupt,Interrupt"
bitfld.long 0x00 2. "  DMA_CMD_COMP ,A data DMA command has completed on this bank" "No interrupt,Interrupt"
bitfld.long 0x00 0. "  ECC_UNCOR_ERR        ,Ecc logic detected uncorrectable error while reading data from flash device" "No interrupt,Interrupt"
group.long (0x20+0xA0)++0x03
line.long 0x00 "INTR_EN2,Interrupt Enable Register For Bank 2"
bitfld.long 0x00 16. " ERASED_PAGE  ,Erased page detected on reads" "Disabled,Enabled"
bitfld.long 0x00 15. "      PAGE_XFER_INC ,Page of data transfered to or from the device" "Disabled,Enabled"
bitfld.long 0x00 14. "      PIPE_CMD_ERR ,Pipeline command sequence violated" "Disabled,Enabled"
bitfld.long 0x00 13. "      RST_COMP             ,Controller has finished reset and initialization process" "Disabled,Enabled"
newline
bitfld.long 0x00 12. " INT_ACT      ,R/B pin of device transitioned from low to high" "Disabled,Enabled"
bitfld.long 0x00 11. "      UNSUP_CMD     ,An unsupported command received" "Disabled,Enabled"
bitfld.long 0x00 10. "      LOCKED_BLK   ,The address to program or erase operation is to a locked block and the operation failed" "Disabled,Enabled"
bitfld.long 0x00 9. "      PIPE_CPYBCK_CMD_COMP ,A pipeline command or a copyback bank command has completed on this particular bank" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " ERASE_COMP   ,Device erase operation complete" "Disabled,Enabled"
bitfld.long 0x00 7. "      PROGRAM_COMP  ,Device finished the last issued program command" "Disabled,Enabled"
bitfld.long 0x00 6. "      LOAD_COMP    ,Device finished the last issued load command" "Disabled,Enabled"
bitfld.long 0x00 5. "      ERASE_FAIL           ,Erase failure occurred in the device on issuance of a erase command" "Disabled,Enabled"
newline
bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure occurred in the device on issuance of a program command" "Disabled,Enabled"
bitfld.long 0x00 3. "      TIME_OUT      ,Watchdog timer has triggered in the controller due to one of the reasons like device not responding or controller state machine did not get back to idle" "Disabled,Enabled"
bitfld.long 0x00 2. "      DMA_CMD_COMP ,A data DMA command has completed on this bank" "Disabled,Enabled"
bitfld.long 0x00 0. "      ECC_UNCOR_ERR        ,Ecc logic detected uncorrectable error while reading data from flash device" "Disabled,Enabled"
rgroup.long (0x30+0xA0)++0x03
line.long 0x00 "PAGE_CNT2,Decrementing Page Count Bank 2"
hexmask.long.byte 0x00 0.--7. 1. " VALUE        ,Maintains a decrementing count of the number of pages in the multi-page (pipeline and copyback) command being executed"
rgroup.long (0x40+0xA0)++0x03
line.long 0x00 "ERR_PAGE_ADDR2,Erred Page Address Bank 2"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE        ,Holds the page address that resulted in a failure on program or erase operation"
rgroup.long (0x50+0xA0)++0x03
line.long 0x00 "ERR_BLOCK_ADDR2,Erred Block Address Bank 2"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE        ,Holds the block address that resulted in a failure on program or erase operation"
tree.end
tree "Bank 3 Registers"
group.long (0x10+0xF0)++0x03
line.long 0x00 "INTR_STATUS3,Interrupt Status Register For Bank 3"
bitfld.long 0x00 16. " ERASED_PAGE  ,Erased page detected on reads" "No interrupt,Interrupt"
bitfld.long 0x00 15. "  PAGE_XFER_INC ,Page of data transfered to or from the device" "No interrupt,Interrupt"
bitfld.long 0x00 14. "  PIPE_CMD_ERR ,Pipeline command sequence violated" "No interrupt,Interrupt"
bitfld.long 0x00 13. "  RST_COMP             ,Controller has finished reset and initialization process" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " INT_ACT      ,R/B pin of device transitioned from low to high" "No interrupt,Interrupt"
bitfld.long 0x00 11. "  UNSUP_CMD     ,An unsupported command received" "No interrupt,Interrupt"
bitfld.long 0x00 10. "  LOCKED_BLK   ,The address to program or erase operation is to a locked block and the operation failed" "No interrupt,Interrupt"
bitfld.long 0x00 9. "  PIPE_CPYBCK_CMD_COMP ,A pipeline command or a copyback bank command has completed on this particular bank" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " ERASE_COMP   ,Device erase operation complete" "No interrupt,Interrupt"
bitfld.long 0x00 7. "  PROGRAM_COMP  ,Device finished the last issued program command" "No interrupt,Interrupt"
bitfld.long 0x00 6. "  LOAD_COMP    ,Device finished the last issued load command" "No interrupt,Interrupt"
bitfld.long 0x00 5. "  ERASE_FAIL           ,Erase failure occurred in the device on issuance of a erase command" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure occurred in the device on issuance of a program command" "No interrupt,Interrupt"
bitfld.long 0x00 3. "  TIME_OUT      ,Watchdog timer has triggered in the controller due to one of the reasons like device not responding or controller state machine did not get back to idle" "No interrupt,Interrupt"
bitfld.long 0x00 2. "  DMA_CMD_COMP ,A data DMA command has completed on this bank" "No interrupt,Interrupt"
bitfld.long 0x00 0. "  ECC_UNCOR_ERR        ,Ecc logic detected uncorrectable error while reading data from flash device" "No interrupt,Interrupt"
group.long (0x20+0xF0)++0x03
line.long 0x00 "INTR_EN3,Interrupt Enable Register For Bank 3"
bitfld.long 0x00 16. " ERASED_PAGE  ,Erased page detected on reads" "Disabled,Enabled"
bitfld.long 0x00 15. "      PAGE_XFER_INC ,Page of data transfered to or from the device" "Disabled,Enabled"
bitfld.long 0x00 14. "      PIPE_CMD_ERR ,Pipeline command sequence violated" "Disabled,Enabled"
bitfld.long 0x00 13. "      RST_COMP             ,Controller has finished reset and initialization process" "Disabled,Enabled"
newline
bitfld.long 0x00 12. " INT_ACT      ,R/B pin of device transitioned from low to high" "Disabled,Enabled"
bitfld.long 0x00 11. "      UNSUP_CMD     ,An unsupported command received" "Disabled,Enabled"
bitfld.long 0x00 10. "      LOCKED_BLK   ,The address to program or erase operation is to a locked block and the operation failed" "Disabled,Enabled"
bitfld.long 0x00 9. "      PIPE_CPYBCK_CMD_COMP ,A pipeline command or a copyback bank command has completed on this particular bank" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " ERASE_COMP   ,Device erase operation complete" "Disabled,Enabled"
bitfld.long 0x00 7. "      PROGRAM_COMP  ,Device finished the last issued program command" "Disabled,Enabled"
bitfld.long 0x00 6. "      LOAD_COMP    ,Device finished the last issued load command" "Disabled,Enabled"
bitfld.long 0x00 5. "      ERASE_FAIL           ,Erase failure occurred in the device on issuance of a erase command" "Disabled,Enabled"
newline
bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure occurred in the device on issuance of a program command" "Disabled,Enabled"
bitfld.long 0x00 3. "      TIME_OUT      ,Watchdog timer has triggered in the controller due to one of the reasons like device not responding or controller state machine did not get back to idle" "Disabled,Enabled"
bitfld.long 0x00 2. "      DMA_CMD_COMP ,A data DMA command has completed on this bank" "Disabled,Enabled"
bitfld.long 0x00 0. "      ECC_UNCOR_ERR        ,Ecc logic detected uncorrectable error while reading data from flash device" "Disabled,Enabled"
rgroup.long (0x30+0xF0)++0x03
line.long 0x00 "PAGE_CNT3,Decrementing Page Count Bank 3"
hexmask.long.byte 0x00 0.--7. 1. " VALUE        ,Maintains a decrementing count of the number of pages in the multi-page (pipeline and copyback) command being executed"
rgroup.long (0x40+0xF0)++0x03
line.long 0x00 "ERR_PAGE_ADDR3,Erred Page Address Bank 3"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE        ,Holds the page address that resulted in a failure on program or erase operation"
rgroup.long (0x50+0xF0)++0x03
line.long 0x00 "ERR_BLOCK_ADDR3,Erred Block Address Bank 3"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE        ,Holds the block address that resulted in a failure on program or erase operation"
tree.end
width 0x0B
tree.end
tree "NAND_ECC (NAND ECC Registers)"
base ad:0xFFB80650
width 16.
rgroup.long 0x00++0x03
line.long 0x00 "ECCCORINFO_B01,ECC Error Correction Information Register"
bitfld.long 0x00 15. " UNCOR_ERR_B1 ,Uncorrectable error occurred while reading pages for last transaction in Bank1" "No error,Error"
hexmask.long.byte 0x00 8.--14. 1. "  MAX_ERRORS_B1 ,Maximum of number of errors corrected per sector in Bank1"
bitfld.long 0x00 7. "  UNCOR_ERR_B0 ,Uncorrectable error occurred while reading pages for last transaction in Bank0" "No error,Error"
hexmask.long.byte 0x00 0.--6. 1. "  MAX_ERRORS_B0 ,Maximum of number of errors corrected per sector in Bank0"
rgroup.long 0x10++0x03
line.long 0x00 "ECCCORINFO_B23,ECC Error Correction Information Register"
bitfld.long 0x00 15. " UNCOR_ERR_B3 ,Uncorrectable error occurred while reading pages for last transaction in Bank3" "No error,Error"
hexmask.long.byte 0x00 8.--14. 1. "  MAX_ERRORS_B3 ,Maximum of number of errors corrected per sector in Bank3"
bitfld.long 0x00 7. "  UNCOR_ERR_B2 ,Uncorrectable error occurred while reading pages for last transaction in Bank2" "No error,Error"
hexmask.long.byte 0x00 0.--6. 1. "  MAX_ERRORS_B2 ,Maximum of number of errors corrected per sector in Bank2"
width 0x0B
tree.end
tree "NAMD_DMA (NAND DMA Registers)"
base ad:0xFFB80700
width 44.
group.long 0x00++0x03
line.long 0x00 "DMA_ENABLE,DMA Enable Register"
bitfld.long 0x00 0. " FLAG                       ,Enables data DMA operation in the controller" "Disabled,Enabled"
group.long 0x20++0x03
line.long 0x00 "DMA_INTR,DMA Interrupt Register"
bitfld.long 0x00 6. " CMDDMA_IDLE                ,Command DMA became idle after completing all descriptors" "No interrupt,Interrupt"
bitfld.long 0x00 4. "  DESC_COMP_CHANNEL3           ,Indicates CMD-DMA channel 3 descriptor execution done" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " DESC_COMP_CHANNEL2         ,Indicates CMD-DMA channel 2 descriptor execution done" "No interrupt,Interrupt"
bitfld.long 0x00 2. "  DESC_COMP_CHANNEL1           ,Indicates CMD-DMA channel 1 descriptor execution done" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " DESC_COMP_CHANNEL0         ,Indicates CMD-DMA channel 0 descriptor execution done" "No interrupt,Interrupt"
bitfld.long 0x00 0. "  TARGET_ERROR                 ,Controller initiator interface received an error target response for a transaction" "No interrupt,Interrupt"
group.long 0x30++0x03
line.long 0x00 "DMA_INTR_EN,DMA Interrupt Enable Register"
bitfld.long 0x00 6. " CMDDMA_IDLE                ,Command DMA became idle after completing all descriptors" "Disabled,Enabled"
bitfld.long 0x00 4. "      DESC_COMP_CHANNEL3           ,Indicates CMD-DMA channel 3 descriptor execution done" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " DESC_COMP_CHANNEL2         ,Indicates CMD-DMA channel 2 descriptor execution done" "Disabled,Enabled"
bitfld.long 0x00 2. "      DESC_COMP_CHANNEL1           ,Indicates CMD-DMA channel 1 descriptor execution done" "Disabled,Enabled"
newline
bitfld.long 0x00 1. " DESC_COMP_CHANNEL0         ,Indicates CMD-DMA channel 0 descriptor execution done" "Disabled,Enabled"
bitfld.long 0x00 0. "      TARGET_ERROR                 ,Controller initiator interface received an error target response for a transaction" "Disabled,Enabled"
rgroup.long 0x40++0x03
line.long 0x00 "TARGET_ERR_ADDR_LO,Transaction Address Lower Bits For Which Controller Initiator Interface Received An Error Target Response"
hexmask.long.word 0x00 0.--15. 0x01 " VALIE                      ,Least significant 16 bits"
rgroup.long 0x50++0x03
line.long 0x00 "TARGET_ERR_ADDR_HI,Transaction Address Higher Bits For Which Controller Initiator Interface Received An Error Target Response"
hexmask.long.word 0x00 0.--15. 0x01 " VALUE                      ,Most significant 16 bits"
group.long 0x70++0x03
line.long 0x00 "FLASH_BURST_LENGTH,Flash Burst Length"
hexmask.long.tbyte 0x00 8.--31. 1. " POLLING_SYNC_COUNTER_VALUE ,Number of cycles CMDDMA channel has to wait before polling the sync pointer again"
bitfld.long 0x00 4. "        CONTINOUS_BURST              ,When this bit is set the Data DMA will burst the entire page from/to the flash device" "0,1"
newline
bitfld.long 0x00 0.--1. " VALUE                      ,Sets the burst used by data dma for transferring data to/from flash device" "64 bytes,128 bytes,256 bytes,512 bytes"
group.long 0x80++0x03
line.long 0x00 "CHIP_INTERLEAVE_ENABLE_AND_ALLOW_INT_READS,Chip Interleave Enable And Allow Interleaved Reads"
bitfld.long 0x00 8. " CMD_DMA_ERROR_ENABLE       ,If this bit is set the channel will stop executing any further commands till f/w comes and clears the error bit in the cmd_dma_channel_error_register" "Disabled,Enabled"
bitfld.long 0x00 4. "      ALLOW_INT_READS_WITHIN_LUNS  ,This bit informs the controller to enable or disable simultaneous read accesses to different LUNS in the same bank" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " CHIP_INTERLEAVE_ENABLE     ,This bit informs the controller to enable or disable interleaving among banks/LUNS" "Disabled,Enabled"
group.long 0xA0++0x03
line.long 0x00 "NO_OF_BLOCKS_PER_LUN,Number Of Blocks Per LUN"
bitfld.long 0x00 28. " ISSUE_READ_BEFORE_SYNC     ,Issue LOAD cmd to flash core even if SYNC condition is not satisfied" "0,1"
bitfld.long 0x00 24. "             UPDATE_SYNC_BEFORE_PROG_COMP ,Update SYNC Pointer after the data is written to flash and dont wait for program to complete" "0,1"
newline
bitfld.long 0x00 0.--3. " VALUE                      ,Indicates the first block of next LUN" "1024,2048,4096,8192,16384,32768,65536,131072,?..."
group.long 0xB0++0x03
line.long 0x00 "LUN_STATUS_CMD,Next LUN Status Based Command Indicator"
hexmask.long.word 0x00 0.--15. 1. " VALUE                      ,Indicates the command to check the status of LUN/Die"
rgroup.long 0x60++0x03
line.long 0x00 "CHNL_ACTIVE,Indicates CMD-DMA Channel Activity Status"
bitfld.long 0x00 3. " CHANNEL3                   ,CMD-DMA channel 3 is active" "Not active,Active"
bitfld.long 0x00 2. "    CHANNEL2                     ,CMD-DMA channel 2 is active" "Not active,Active"
newline
bitfld.long 0x00 1. " CHANNEL1                   ,CMD-DMA channel 1 is active" "Not active,Active"
bitfld.long 0x00 0. "    CHANNEL0                     ,CMD-DMA channel 0 is active" "Not active,Active"
group.long 0xC0++0x03
line.long 0x00 "CMD_DMA_CHANNEL_ERROR,Indicates CMD DMA Channel Receiving An Error Condition"
bitfld.long 0x00 3. " CHANNEL3                   ,CMD-DMA channel 3 received an error" "No error,Error"
bitfld.long 0x00 2. "      CHANNEL2                     ,CMD-DMA channel 2 received an error" "No error,Error"
newline
bitfld.long 0x00 1. " CHANNEL1                   ,CMD-DMA channel 1 received an error" "No error,Error"
bitfld.long 0x00 0. "      CHANNEL0                     ,CMD-DMA channel 0 received an error" "No error,Error"
group.long 0xD0++0x03
line.long 0x00 "CMD_DMA_CHANNEL_ERROR_EN,Enable Bits Indicating CMD DMA Channel Receiving An Error Condition"
bitfld.long 0x00 3. " CHANNEL3                   ,Enable bit for CMD-DMA channel 3 receiving an error" "Disabled,Enabled"
bitfld.long 0x00 2. "      CHANNEL2                     ,Enable bit for CMD-DMA channel 2 receiving an error" "Disabled,Enabled"
newline
bitfld.long 0x00 1. " CHANNEL1                   ,Enable bit for CMD-DMA channel 1 receiving an error" "Disabled,Enabled"
bitfld.long 0x00 0. "      CHANNEL0                     ,Enable bit for CMD-DMA channel 0 receiving an error" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "RESCAN_BUFFER_FLAG,Rescan Buffer Flag"
bitfld.long 0x00 0.--3. " FLAG                       ,Force rescan of buffer flags in cmd-dma channels" "None,0,1,0/1,2,0/2,1/2,0/1/2,3,0/3,1/3,0/1/3,2/3,0/2/3,1/2/3,0/1/2/3"
width 0x0B
tree.end
tree "NAND_DATA (NAND DATA Registers)"
base ad:0xFFB90000
width 44.
group.long 0x00++0x03
line.long 0x00 "NAND_DATA,NAND Data"
button "DATA" "d 0xFFB90000--0xFFB9FFFF /long"
width 0x0B
tree.end
tree.end
tree "SDMMC (SD/MMC Controller)"
base ad:0xFF808000
width 18.
group.long 0x00++0x0B
line.long 0x00 "CTRL,Control Register"
bitfld.long 0x00 25. " USE_INTERNAL_DMAC                   ,Use internal DMAC" "Slave interface,Internal DMAC"
bitfld.long 0x00 24. "  ENABLE_OD_PULLUP                     ,External open-drain pullup enable" "Disabled,Enabled"
bitfld.long 0x00 20.--23. "           CARD_VOLTAGE_B       ,Card regulator-B voltage setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. " CARD_VOLTAGE_A                      ,Card regulator-A voltage setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "               CEATA_DEVICE_INTERRUPT_STATUS        ,CE-ATA device interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 10. "           SEND_AUTO_STOP_CCSD  ,Send command completion signal disable" "Not sent,Sent"
newline
bitfld.long 0x00 9. " SEND_CCSD                           ,Send CCSD" "Not sent,Sent"
bitfld.long 0x00 8. "         ABORT_READ_DATA                      ,Abort read data" "No change,Reset data"
bitfld.long 0x00 7. "         SEND_IRQ_RESPONSE    ,Send IRQ response" "No change,Sent"
newline
bitfld.long 0x00 6. " READ_WAIT                           ,Read wait" "Cleared,Asserted"
bitfld.long 0x00 5. "         DMA_ENABLE                           ,DMA transfer mode enable" "Disabled,Enabled"
bitfld.long 0x00 4. "           INT_ENABLE           ,Global interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " DMA_RESET                           ,DMA reset" "No reset,Reset"
bitfld.long 0x00 1. "         FIFO_RESET                           ,FIFO reset" "No reset,Reset"
bitfld.long 0x00 0. "           CONTROLLER_RESET     ,DMA transfer mode enable" "No reset,Reset"
line.long 0x04 "PWREN,Power Enable Register"
bitfld.long 0x04 0. " POWER_ENABLE_0                      ,Power on/off switch for card" "Power off,Power on"
line.long 0x08 "CLKDIV,Clock Divider Register"
hexmask.long.byte 0x08 24.--31. 1. " CLK_DIVIDER3                        ,Clock divider-3 value"
hexmask.long.byte 0x08 16.--23. 1. "               CLK_DIVIDER2                         ,Clock divider-2 value"
hexmask.long.byte 0x08 8.--15. 1. "                 CLK_DIVIDER1         ,Clock divider-1 value"
newline
hexmask.long.byte 0x08 0.--7. 1. " CLK_DIVIDER0                        ,Clock divider-0 value"
hgroup.long 0x0C++0x03
hide.long 0x00 "CLKSRC,Clock Source Register"
group.long 0x10++0x1B
line.long 0x00 "CLKENA,Clock Enable Register"
bitfld.long 0x00 16. " CCLK_LOW_POWER_0                    ,Low-power control for SD card clock" "Non low power,Low power"
bitfld.long 0x00 0. "    CCLK_ENABLE_0                        ,Clock-enable control for SD card clock" "Disabled,Enabled"
line.long 0x04 "TMOUT,Timeout Register"
hexmask.long.tbyte 0x04 8.--31. 1. " DATA_TIMEOUT                        ,Value for card Data Read time-out"
hexmask.long.byte 0x04 0.--7. 1. "           RESPONSE_TIMEOUT                     ,Response time-out value"
line.long 0x08 "CTYPE,Card Type Register"
bitfld.long 0x08 16. " CARD_WIDTH1                         ,Indicates if card is 8-bit" "Non 8-bit,8-bit"
bitfld.long 0x08 0. "        CARD_WIDTH0                          ,Indicates if card is 1-bit or 4-bit" "1-bit,4-bit"
line.long 0x0C "BLKSIZ,Block Size Register"
hexmask.long.word 0x0C 0.--15. 1. " BLOCK_SIZE                          ,Block size"
line.long 0x10 "BYTCNT,Byte Count Register"
line.long 0x14 "INTMASK,Interrupt Mask Register"
bitfld.long 0x14 31. " SDIO_INT_MASK_CARD15                ,Mask SDIO interrupt 15" "Masked,Not masked"
bitfld.long 0x14 30. "       SDIO_INT_MASK_CARD14                 ,Mask SDIO interrupt 14" "Masked,Not masked"
bitfld.long 0x14 29. "         SDIO_INT_MASK_CARD13 ,Mask SDIO interrupt 13" "Masked,Not masked"
newline
bitfld.long 0x14 28. " SDIO_INT_MASK_CARD12                ,Mask SDIO interrupt 12" "Masked,Not masked"
bitfld.long 0x14 27. "       SDIO_INT_MASK_CARD11                 ,Mask SDIO interrupt 11" "Masked,Not masked"
bitfld.long 0x14 26. "         SDIO_INT_MASK_CARD10 ,Mask SDIO interrupt 10" "Masked,Not masked"
newline
bitfld.long 0x14 25. " SDIO_INT_MASK_CARD9                 ,Mask SDIO interrupt 9" "Masked,Not masked"
bitfld.long 0x14 24. "       SDIO_INT_MASK_CARD8                  ,Mask SDIO interrupt 8" "Masked,Not masked"
bitfld.long 0x14 23. "         SDIO_INT_MASK_CARD7  ,Mask SDIO interrupt 7" "Masked,Not masked"
newline
bitfld.long 0x14 22. " SDIO_INT_MASK_CARD6                 ,Mask SDIO interrupt 6" "Masked,Not masked"
bitfld.long 0x14 21. "       SDIO_INT_MASK_CARD5                  ,Mask SDIO interrupt 5" "Masked,Not masked"
bitfld.long 0x14 20. "         SDIO_INT_MASK_CARD4  ,Mask SDIO interrupt 4" "Masked,Not masked"
newline
bitfld.long 0x14 19. " SDIO_INT_MASK_CARD3                 ,Mask SDIO interrupt 3" "Masked,Not masked"
bitfld.long 0x14 18. "       SDIO_INT_MASK_CARD2                  ,Mask SDIO interrupt 2" "Masked,Not masked"
bitfld.long 0x14 17. "         SDIO_INT_MASK_CARD1  ,Mask SDIO interrupt 1" "Masked,Not masked"
newline
bitfld.long 0x14 16. " SDIO_INT_MASK_CARD0                 ,Mask SDIO interrupt 0" "Masked,Not masked"
bitfld.long 0x14 15. "       EBE_INT_MASK                         ,End-bit error / Write no CRC interrupt enable" "Masked,Not masked"
bitfld.long 0x14 14. "         ACD_INT_MASK         ,Auto command done interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 13. " SBE_BCI_INT_MASK                    ,Start bit error / Busy complete interrupt interrupt enable" "Masked,Not masked"
bitfld.long 0x14 12. "       HLE_INT_MASK                         ,Hardware locked write error interrupt enable" "Masked,Not masked"
bitfld.long 0x14 11. "         FRUN_INT_MASK        ,FIFO underrun / Overrun error interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 10. " HTO_INT_MASK                        ,Data starvation-by-host timeout / volt_switch_int interrupt enable" "Masked,Not masked"
bitfld.long 0x14 9. "       DRTO_INT_MASK                        ,Data read timeout interrupt enable" "Masked,Not masked"
bitfld.long 0x14 8. "         RTO_INT_MASK         ,Response timeout interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 7. " DCRC_INT_MASK                       ,Data CRC error interrupt enable" "Masked,Not masked"
bitfld.long 0x14 6. "       RCRC_INT_MASK                        ,Response CRC error interrupt enable" "Masked,Not masked"
bitfld.long 0x14 5. "         RXDR_INT_MASK        ,Receive FIFO data request interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 4. " TXDR_INT_MASK                       ,Transmit FIFO data request interrupt enable" "Masked,Not masked"
bitfld.long 0x14 3. "       DTO_INT_MASK                         ,Data transfer over interrupt enable" "Masked,Not masked"
bitfld.long 0x14 2. "         CMD_INT_MASK         ,Command done interrupt enable" "Masked,Not masked"
newline
bitfld.long 0x14 1. " RE_INT_MASK                         ,Response error interrupt enable" "Masked,Not masked"
bitfld.long 0x14 0. "       CD_INT_MASK                          ,Card detect interrupt enable" "Masked,Not masked"
line.long 0x18 "CMDARG,Command Argument Register"
newline
group.long 0x2C++0x03
line.long 0x00 "CMD,Command Register"
bitfld.long 0x00 31. "  START_CMD          ,Start command" "Not started,Started"
bitfld.long 0x00 29. "             USE_HOLD_REG                ,Use hold register" "Bypassed,Not bypassed"
newline
bitfld.long 0x00 28. "  VOLT_SWITCH        ,Voltage switch bit" "Disabled,Enabled"
bitfld.long 0x00 27. "                BOOT_MODE                   ,Boot mode" "Mandatory,Alternate"
newline
bitfld.long 0x00 26. "  DISABLE_BOOT       ,Disable boot" "No,Yes"
bitfld.long 0x00 25. "                     EXPECT_BOOT_ACK             ,Expect boot acknowledge" "Not expected,Expected"
newline
bitfld.long 0x00 24. "  ENABLE_BOOT        ,Enable boot" "Disabled,Enabled"
bitfld.long 0x00 23. "                CCS_EXPECTED                ,CCS expected" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "  READ_CEATA_DEVICE  ,Read access to CE-ATA device" "No access,Access"
bitfld.long 0x00 21. "               UPDATE_CLOCK_REGISTERS_ONLY ,Update clock registers only" "Normal,Update"
newline
bitfld.long 0x00 16.--20. "  CARD_NUMBER        ,Card number in use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,?..."
bitfld.long 0x00 15. "                      SEND_INITIALIZATION         ,Send initialization" "Not sent,Sent"
newline
bitfld.long 0x00 14. "  STOP_ABORT_CMD     ,Stop or abort command" "Neither stop nor abort,Send or abort"
bitfld.long 0x00 13. "  WAIT_PRVDATA_COMPLETE       ,Wait for previous data transfer completion before sending command" "Send at once,Wait"
newline
bitfld.long 0x00 12. "  SEND_AUTO_STOP     ,Send stop command at the end of data transfer" "Not sent,Sent"
bitfld.long 0x00 11. "                TRANSFER_MODE               ,Transfer mode" "Block,Stream"
newline
bitfld.long 0x00 10. "  READ_WRITE         ,Card read/write" "Read,Write"
bitfld.long 0x00 9. "                   DATA_EXPECTED               ,Data expected" "Not expected,Expected"
newline
bitfld.long 0x00 8. "  CHECK_RESPONSE_CRC ,Check response CRC" "Not checked,Checked"
bitfld.long 0x00 7. "             RESPONSE_LENGTH             ,Response length" "Short,Long"
newline
bitfld.long 0x00 6. "  RESPONSE_EXPECT    ,Response expect" "Not expected,Expected"
bitfld.long 0x00 0.--5. "            CMD_INDEX                   ,Command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,?..."
newline
rgroup.long 0x30++0x03
line.long 0x00 "RESP0,Response Register 0"
rgroup.long 0x34++0x03
line.long 0x00 "RESP1,Response Register 1"
rgroup.long 0x38++0x03
line.long 0x00 "RESP2,Response Register 2"
rgroup.long 0x3C++0x03
line.long 0x00 "RESP3,Response Register 3"
rgroup.long 0x40++0x03
line.long 0x00 "MINTSTS,Masked Interrupt Status Register"
bitfld.long 0x00 31. " SDIO_INTERRUPT_CARD15               ,Interrupt from SDIO card 15" "Disabled,Enabled"
bitfld.long 0x00 30. "         SDIO_INTERRUPT_CARD14                ,Interrupt from SDIO card 14" "Disabled,Enabled"
newline
bitfld.long 0x00 29. " SDIO_INTERRUPT_CARD13               ,Interrupt from SDIO card 13" "Disabled,Enabled"
bitfld.long 0x00 28. "         SDIO_INTERRUPT_CARD12                ,Interrupt from SDIO card 12" "Disabled,Enabled"
newline
bitfld.long 0x00 27. " SDIO_INTERRUPT_CARD11               ,Interrupt from SDIO card 11" "Disabled,Enabled"
bitfld.long 0x00 26. "         SDIO_INTERRUPT_CARD10                ,Interrupt from SDIO card 10" "Disabled,Enabled"
newline
bitfld.long 0x00 25. " SDIO_INTERRUPT_CARD9                ,Interrupt from SDIO card 9" "Disabled,Enabled"
bitfld.long 0x00 24. "         SDIO_INTERRUPT_CARD8                 ,Interrupt from SDIO card 8" "Disabled,Enabled"
newline
bitfld.long 0x00 23. " SDIO_INTERRUPT_CARD7                ,Interrupt from SDIO card 7" "Disabled,Enabled"
bitfld.long 0x00 22. "         SDIO_INTERRUPT_CARD6                 ,Interrupt from SDIO card 6" "Disabled,Enabled"
newline
bitfld.long 0x00 21. " SDIO_INTERRUPT_CARD5                ,Interrupt from SDIO card 5" "Disabled,Enabled"
bitfld.long 0x00 20. "         SDIO_INTERRUPT_CARD4                 ,Interrupt from SDIO card 4" "Disabled,Enabled"
newline
bitfld.long 0x00 19. " SDIO_INTERRUPT_CARD3                ,Interrupt from SDIO card 3" "Disabled,Enabled"
bitfld.long 0x00 18. "         SDIO_INTERRUPT_CARD2                 ,Interrupt from SDIO card 2" "Disabled,Enabled"
newline
bitfld.long 0x00 17. " SDIO_INTERRUPT_CARD1                ,Interrupt from SDIO card 1" "Disabled,Enabled"
bitfld.long 0x00 16. "         SDIO_INTERRUPT_CARD0                 ,Interrupt from SDIO card 0" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " END_BIT_ERROR_INTERRUPT             ,End-bit error" "Disabled,Enabled"
bitfld.long 0x00 14. "         AUTO_COMMAND_DONE_INTERRUPT          ,Auto command done" "Disabled,Enabled"
newline
bitfld.long 0x00 13. " BUSY_COMPLETE_INTERRUPT_INTERRUPT   ,Start-bit error / Busy complete interrupt" "Disabled,Enabled"
bitfld.long 0x00 12. "         HARDWARE_LOCKED_WRITE_INTERRUPT      ,Hardware locked write error" "Disabled,Enabled"
newline
bitfld.long 0x00 11. " FIFO_UNDER_OVER_RUN_INTERRUPT       ,FIFO underrun/overrun error" "Disabled,Enabled"
bitfld.long 0x00 10. "         HOST_TIMEOUT_INTERRUPT               ,Data starvation by host timeout/Volt switch int" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " DATA_READ_TIMEOUT_INTERRUPT         ,Data read time-out" "Disabled,Enabled"
bitfld.long 0x00 8. "         RESPONSE_TIMEOUT_INTERRUPT           ,Response time-out" "Disabled,Enabled"
newline
bitfld.long 0x00 7. " DATA_CRC_ERROR_INTERRUPT            ,Data CRC error" "Disabled,Enabled"
bitfld.long 0x00 6. "         RESPONSE_CRC_ERROR_INTERRUPT         ,Response CRC error" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " RECEIVE_FIFO_DATA_REQUEST_INTERRUPT ,Receive FIFO data request" "Disabled,Enabled"
bitfld.long 0x00 4. "         TRANSMIT_RECEIVE_FIFO_DATA_INTERRUPT ,Transmit FIFO data request" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " DATA_TRANSFER_OVER_INTERRUPT        ,Data transfer over" "Disabled,Enabled"
bitfld.long 0x00 2. "         COMMAND_DONE_INTERRUPT               ,Command done" "Disabled,Enabled"
newline
bitfld.long 0x00 1. " RESPONSE_ERROR_INTERRUPT            ,Response error" "Disabled,Enabled"
bitfld.long 0x00 0. "         CARD_DETECT_INTERRUPT                ,Card detect" "Disabled,Enabled"
group.long 0x44++0x03
line.long 0x00 "RINTSTS,Raw Interrupt Status Register"
eventfld.long 0x00 31. " SDIO_INTERRUPT_CARD15               ,Interrupt from SDIO card 15" "No interrupt,Interrupt"
eventfld.long 0x00 30. "     SDIO_INTERRUPT_CARD14                ,Interrupt from SDIO card 14" "No interrupt,Interrupt"
newline
eventfld.long 0x00 29. " SDIO_INTERRUPT_CARD13               ,Interrupt from SDIO card 13" "No interrupt,Interrupt"
eventfld.long 0x00 28. "     SDIO_INTERRUPT_CARD12                ,Interrupt from SDIO card 12" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. " SDIO_INTERRUPT_CARD11               ,Interrupt from SDIO card 11" "No interrupt,Interrupt"
eventfld.long 0x00 26. "     SDIO_INTERRUPT_CARD10                ,Interrupt from SDIO card 10" "No interrupt,Interrupt"
newline
eventfld.long 0x00 25. " SDIO_INTERRUPT_CARD9                ,Interrupt from SDIO card 9" "No interrupt,Interrupt"
eventfld.long 0x00 24. "     SDIO_INTERRUPT_CARD8                 ,Interrupt from SDIO card 8" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. " SDIO_INTERRUPT_CARD7                ,Interrupt from SDIO card 7" "No interrupt,Interrupt"
eventfld.long 0x00 22. "     SDIO_INTERRUPT_CARD6                 ,Interrupt from SDIO card 6" "No interrupt,Interrupt"
newline
eventfld.long 0x00 21. " SDIO_INTERRUPT_CARD5                ,Interrupt from SDIO card 5" "No interrupt,Interrupt"
eventfld.long 0x00 20. "     SDIO_INTERRUPT_CARD4                 ,Interrupt from SDIO card 4" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. " SDIO_INTERRUPT_CARD3                ,Interrupt from SDIO card 3" "No interrupt,Interrupt"
eventfld.long 0x00 18. "     SDIO_INTERRUPT_CARD2                 ,Interrupt from SDIO card 2" "No interrupt,Interrupt"
newline
eventfld.long 0x00 17. " SDIO_INTERRUPT_CARD1                ,Interrupt from SDIO card 1" "No interrupt,Interrupt"
eventfld.long 0x00 16. "     SDIO_INTERRUPT_CARD0                 ,Interrupt from SDIO card 0" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. " END_BIT_ERROR_STATUS                ,End-bit error" "No interrupt,Interrupt"
eventfld.long 0x00 14. "     AUTO_COMMAND_DONE_STATUS             ,Auto command done" "No interrupt,Interrupt"
newline
eventfld.long 0x00 13. " BUSY_COMPLETE_STATUS                ,Start bit error / Busy complete status" "No interrupt,Interrupt"
eventfld.long 0x00 12. "     HARDWARE_LOCKED_WRITE_STATUS         ,Hardware locked write error" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. " FIFO_UNDER_OVER_RUN_STATUS          ,FIFO underrun/overrun error" "No interrupt,Interrupt"
eventfld.long 0x00 10. "     HOST_TIMEOUT_STATUS                  ,Data starvation by host timeout/Volt switch int" "No interrupt,Interrupt"
newline
eventfld.long 0x00 9. " DATA_READ_TIMEOUT_STATUS            ,Data read timeout" "No interrupt,Interrupt"
eventfld.long 0x00 8. "     RESPONSE_TIMEOUT_STATUS              ,Response timeout" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. " DATA_CRC_ERROR_STATUS               ,Data CRC error" "No interrupt,Interrupt"
eventfld.long 0x00 6. "     RESPONSE_CRC_ERROR_STATUS            ,Response CRC error" "No interrupt,Interrupt"
newline
eventfld.long 0x00 5. " RECEIVE_FIFO_DATA_REQUEST_STATUS    ,Receive FIFO data request" "No interrupt,Interrupt"
eventfld.long 0x00 4. "     TRANSMIT_RECEIVE_FIFO_DATA_STATUS    ,Transmit FIFO data request" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. " DATA_TRANSFER_OVER_STATUS           ,Data transfer over" "No interrupt,Interrupt"
eventfld.long 0x00 2. "     COMMAND_DONE_STATUS                  ,Command done" "No interrupt,Interrupt"
newline
eventfld.long 0x00 1. " RESPONSE_ERROR_STATUS               ,Response error" "No interrupt,Interrupt"
eventfld.long 0x00 0. "     CARD_DETECT_STATUS                   ,Card detect" "No interrupt,Interrupt"
rgroup.long 0x48++0x03
line.long 0x00 "STATUS,Status Register"
bitfld.long 0x00 31. " DMA_REQ                             ,DMA request signal state" "Not asserted,Asserted"
bitfld.long 0x00 30. "     DMA_ACK                              ,DMA acknowledge signal state" "Not asserted,Asserted"
hexmask.long.word 0x00 17.--29. 1. "       FIFO_COUNT           ,FIFO count number of filled locations in FIFO"
newline
bitfld.long 0x00 11.--16. " RESPONSE_INDEX                      ,Index of previous response including any auto-stop sent by core" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 10. "               DATA_STATE_MC_BUSY                   ,Data transmit or receive state-machine is busy" "Not busy,Busy"
bitfld.long 0x00 9. "           DATA_BUSY            ,Inverted version of raw selected card_data" "Not busy,Busy"
newline
bitfld.long 0x00 8. " DATA_3_STATUS                       ,Raw selected card_data" "Card not present,Card present"
bitfld.long 0x00 4.--7. " COMMAND_FSM_STATES                   ,Command FSM states" "Idle,Send init sequence,Tx cmd start bit,Tx cmd tx bit,Tx cmd index + arg,Tx cmd crc7,Tx cmd end bit,Rx resp start bit,Rx resp IRQ response,Rx resp tx bit,Rx resp cmd idx,Rx resp data,Rx resp crc7,Rx resp end bit,Cmd path wait NCC,Wait"
newline
bitfld.long 0x00 3. " FIFO_FULL                           ,FIFO is full status" "Not full,Full"
newline
bitfld.long 0x00 2. " FIFO_EMPTY                          ,FIFO is empty status" "Not empty,Empty"
bitfld.long 0x00 1. "        FIFO_TX_WATERMARK                    ,FIFO reached transmit watermark level" "Not reached,Reached"
bitfld.long 0x00 0. "        FIFO_RX_WATERMARK    ,FIFO reached receive watermark level" "Not reached,Reached"
group.long 0x4C++0x03
line.long 0x00 "FIFOTH,FIFO Threshold Watermark Register"
bitfld.long 0x00 28.--30. " DMA_MTS                             ,Burst size of multiple transaction" "1,4,8,16,32,64,128,256"
hexmask.long.word 0x00 16.--27. 1. "              RX_WMARK                             ,FIFO threshold watermark level when receiving data to card"
hexmask.long.word 0x00 0.--11. 1. "               TX_WMARK             ,FIFO threshold watermark level when transmitting data to card"
rgroup.long 0x50++0x07
line.long 0x00 "CDETECT,Card Detect Register"
bitfld.long 0x00 0. " CARD0_DETECT_N                      ,Card detect" "Detected,Not detected"
line.long 0x04 "WRTPRT,Write Protect Register"
bitfld.long 0x04 0. " WRITE_PROTECT_0                     ,Write protect" "Not protected,Protected"
group.long 0x58++0x03
line.long 0x00 "GPIO,General Purpose Input/Output Register"
hexmask.long.word 0x00 8.--23. 1. " GPO                                 ,GPO output value"
hexmask.long.byte 0x00 0.--7. 1. "             GPI                                  ,GPI input value"
rgroup.long 0x5C++0x07
line.long 0x00 "TCBCNT,Transferred CIU Card Byte Count Register"
line.long 0x04 "TBBCNT,Transferred Host to BIU-FIFO Byte Count Register"
group.long 0x64++0x07
line.long 0x00 "DEBNCE,Debounce Count Register"
hexmask.long.tbyte 0x00 0.--23. 1. " DEBOUNCE_COUNT                      ,Number of host clocks used by debounce filter logic"
line.long 0x04 "USRID,User ID Register"
rgroup.long 0x6C++0x07
line.long 0x00 "VERID,Version ID Register"
line.long 0x04 "HCON,Hardware Configuration Register"
bitfld.long 0x04 27. " ADDR_CONFIG                         ,Address configuration" "32-bit,64-bit"
bitfld.long 0x04 26. "           AREA_OPT                             ,Area Optimization" "Not optimized,Optimized"
bitfld.long 0x04 24.--25. "      NUM_CLK_DIC          ,Number of clock dividers" "0,1,2,3"
newline
bitfld.long 0x04 23. " FALSE_PATH                          ,Set clock false path" "Not set,Set"
bitfld.long 0x04 22. "          HOLD_REG                             ,Implement HOLD register" "Not implemented,Implemented"
bitfld.long 0x04 21. "    FIFO_RAM_IN          ,FIFO Ram Inside" "Outside,Inside"
newline
bitfld.long 0x04 18.--20. " GE_DMA_DATA_WIDTH                   ,Generic DMA data width" "16 bits,32 bits,64 bits,?..."
bitfld.long 0x04 16.--17. "          DMA_IF                               ,DMA interface" ",DW DMA,Generic DMA,Non DW DMA"
bitfld.long 0x04 10.--15. "        H_ADDR_WIDTH         ,H Address Width" ",,,,,,,,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits,32 bits,?..."
newline
bitfld.long 0x04 7.--9. " H_DATA_WIDTH                        ,H data width" "16 bits,32 bits,64 bits,?..."
bitfld.long 0x04 6. "          BUS_TYPE                             ,Bus type" "APB,AHB"
bitfld.long 0x04 1.--5. "                NUM_CARD             ,Number of Cards" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x04 0. " CARD_TYPE                           ,Card type" "MMC only,SD MMC"
group.long 0x74++0x07
line.long 0x00 "UHS_REG,UHS-1 Register"
bitfld.long 0x00 31. " DDR_REG_15                          ,DDR mode 15" "Disabled,Enabled"
bitfld.long 0x00 30. "         DDR_REG_14                           ,DDR mode 14" "Disabled,Enabled"
bitfld.long 0x00 29. "           DDR_REG_13           ,DDR mode 13" "Disabled,Enabled"
newline
bitfld.long 0x00 28. " DDR_REG_12                          ,DDR mode 12" "Disabled,Enabled"
bitfld.long 0x00 27. "         DDR_REG_11                           ,DDR mode 11" "Disabled,Enabled"
bitfld.long 0x00 26. "           DDR_REG_10           ,DDR mode 10" "Disabled,Enabled"
newline
bitfld.long 0x00 25. " DDR_REG_9                           ,DDR mode 9" "Disabled,Enabled"
bitfld.long 0x00 24. "         DDR_REG_8                            ,DDR mode 8" "Disabled,Enabled"
bitfld.long 0x00 23. "           DDR_REG_7            ,DDR mode 7" "Disabled,Enabled"
newline
bitfld.long 0x00 22. " DDR_REG_6                           ,DDR mode 6" "Disabled,Enabled"
bitfld.long 0x00 21. "         DDR_REG_5                            ,DDR mode 5" "Disabled,Enabled"
bitfld.long 0x00 20. "           DDR_REG_4            ,DDR mode 4" "Disabled,Enabled"
newline
bitfld.long 0x00 19. " DDR_REG_3                           ,DDR mode 3" "Disabled,Enabled"
bitfld.long 0x00 18. "         DDR_REG_2                            ,DDR mode 2" "Disabled,Enabled"
bitfld.long 0x00 17. "           DDR_REG_1            ,DDR mode 1" "Disabled,Enabled"
newline
bitfld.long 0x00 16. " DDR_REG_0                           ,DDR mode 0" "Disabled,Enabled"
bitfld.long 0x00 15. "         VOLT_REG_15                          ,High voltage mode 15" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 14. "           VOLT_REG_14          ,High voltage mode 14" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 13. " VOLT_REG_13                         ,High voltage mode 13" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 12. "         VOLT_REG_12                          ,High voltage mode 12" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 11. "           VOLT_REG_11          ,High voltage mode 11" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 10. " VOLT_REG_10                         ,High voltage mode 10" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 9. "         VOLT_REG_9                           ,High voltage mode 9" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 8. "           VOLT_REG_8           ,High voltage mode 8" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 7. " VOLT_REG_7                          ,High voltage mode 7" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 6. "         VOLT_REG_6                           ,High voltage mode 6" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 5. "           VOLT_REG_5           ,High voltage mode 5" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 4. " VOLT_REG_4                          ,High voltage mode 4" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 3. "         VOLT_REG_3                           ,High voltage mode 3" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 2. "           VOLT_REG_2           ,High voltage mode 2" "3.3V Vdd,1.8V Vdd"
newline
bitfld.long 0x00 1. " VOLT_REG_1                          ,High voltage mode 1" "3.3V Vdd,1.8V Vdd"
bitfld.long 0x00 0. "         VOLT_REG_0                           ,High voltage mode 0" "3.3V Vdd,1.8V Vdd"
line.long 0x04 "RST_N,H/W Reset"
bitfld.long 0x04 0. " CARD0_RESET                         ,Hardware reset" "Reset,Active mode"
group.long 0x80++0x03
line.long 0x00 "BMOD,Bus Mode Register"
rbitfld.long 0x00 8.--10. " PBL                                 ,Programmable burst length" "1,4,8,16,32,64,128,256"
bitfld.long 0x00 7. "              DE                                   ,IDMAC enable" "Disabled,Enabled"
bitfld.long 0x00 2.--6. "           DSL                  ,Descriptor skip length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1. " FB                                  ,Fixed burst" "No fixed,Fixed"
bitfld.long 0x00 0. "         SWR                                  ,Software reset" "No reset,Reset"
wgroup.long 0x84++0x03
line.long 0x00 "PLDMND,Poll Demand Register"
group.long 0x88++0x0B
line.long 0x00 "DBADDR,Descriptor List Base Address Register"
line.long 0x04 "IDSTS,Internal DMAC Status Register"
rbitfld.long 0x04 13.--16. " FSM                                 ,DMAC state machine present state" "DMA_IDLE,DMA_SUSPEND,DESC_RD,DESC_CHK,DMA_RD_REQ_WAIT,DMA_WR_REQ_WAIT,DMA_RD,DMA_WR,DESC_CLOSE,?..."
rbitfld.long 0x04 10.--12. "  EB                                   ,Error bits (host abort)" ",During transmission,During reception,?..."
newline
eventfld.long 0x04 9. " AIS                                 ,Abnormal interrupt summary" "No interrupt,Interrupt"
newline
eventfld.long 0x04 8. " NIS                                 ,Normal interrupt summary" "No interrupt,Interrupt"
eventfld.long 0x04 5. "     CES                                  ,Card error summary" "No error,Error"
eventfld.long 0x04 4. "           DU                   ,Descriptor unavailable interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x04 2. " FBE                                 ,Fatal Bus Error interrupt" "No interrupt,Interrupt"
eventfld.long 0x04 1. "     RI                                   ,Receive interrupt" "No interrupt,Interrupt"
eventfld.long 0x04 0. "       TI                   ,Transmit interrupt" "No interrupt,Interrupt"
line.long 0x08 "IDINTEN,Internal DMAC Interrupt Enable Register"
bitfld.long 0x08 9. " AI                                  ,Abnormal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x08 8. "         NI                                   ,Normal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x08 5. "           CES                  ,Card error summary interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 4. " DU                                  ,Descriptor unavailable interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 2. "         FBE                                  ,Fatal bus error enable" "Disabled,Enabled"
bitfld.long 0x08 1. "           RI                   ,Receive interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. " TI                                  ,Transmit interrupt enable" "Disabled,Enabled"
rgroup.long 0x94++0x07
line.long 0x00 "DSCADDR,Current Host Descriptor Address Register"
line.long 0x04 "BUFADDR,Current Buffer Descriptor Address Register"
group.long 0x100++0x0B
line.long 0x00 "CARDTHRCTL,Card Threshold Control Register"
hexmask.long.word 0x00 16.--28. 1. " CARDRDTHRESHOLD                     ,Card read threshold size"
rbitfld.long 0x00 2. "             CARDWRTHREN                          ,Card write threshold enable" "Disabled,Enabled"
bitfld.long 0x00 1. "           BUSY_CLR_INT_EN      ,Busy clear interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " CARDRDTHREN                         ,Card read threshold enable" "Disabled,Enabled"
line.long 0x04 "BACK_END_POWER_R,Back End Power Register"
bitfld.long 0x04 15. " BACK_END_POWER_15                   ,Back end power 15" "Off,Supplied"
bitfld.long 0x04 14. "         BACK_END_POWER_14                    ,Back end power 14" "Off,Supplied"
bitfld.long 0x04 13. "           BACK_END_POWER_13    ,Back end power 13" "Off,Supplied"
newline
bitfld.long 0x04 12. " BACK_END_POWER_12                   ,Back end power 12" "Off,Supplied"
bitfld.long 0x04 11. "         BACK_END_POWER_11                    ,Back end power 11" "Off,Supplied"
bitfld.long 0x04 10. "           BACK_END_POWER_10    ,Back end power 10" "Off,Supplied"
newline
bitfld.long 0x04 9. " BACK_END_POWER_9                    ,Back end power 9" "Off,Supplied"
bitfld.long 0x04 8. "         BACK_END_POWER_8                     ,Back end power 8" "Off,Supplied"
bitfld.long 0x04 7. "           BACK_END_POWER_7     ,Back end power 7" "Off,Supplied"
newline
bitfld.long 0x04 6. " BACK_END_POWER_6                    ,Back end power 6" "Off,Supplied"
bitfld.long 0x04 5. "         BACK_END_POWER_5                     ,Back end power 5" "Off,Supplied"
bitfld.long 0x04 4. "           BACK_END_POWER_4     ,Back end power 4" "Off,Supplied"
newline
bitfld.long 0x04 3. " BACK_END_POWER_3                    ,Back end power 3" "Off,Supplied"
bitfld.long 0x04 2. "         BACK_END_POWER_2                     ,Back end power 2" "Off,Supplied"
bitfld.long 0x04 1. "           BACK_END_POWER_1     ,Back end power 1" "Off,Supplied"
newline
bitfld.long 0x04 0. " BACK_END_POWER_0                    ,Back end power 0" "Off,Supplied"
line.long 0x08 "UHS_REG_EXT,UHS Register Extention"
bitfld.long 0x08 30.--31. " EXT_CLK_MUX_CTRL                    ,Input clock control for cclk_in" "0,1,2,3"
hexmask.long.word 0x08 23.--29. 1. "                CLK_DRV_PHASE_CTRL                   ,Control for amount of phase shift on cclk_in_drv clock"
hexmask.long.byte 0x08 16.--22. 1. "               CLK_SMPL_PHASE_CTRL  ,Control for amount of phase shift on cclk_in_sample clock"
newline
bitfld.long 0x08 15. " MMC_VOLT_REG_15                     ,Support for 1.2V bit 15" "Not supported,Supported"
bitfld.long 0x08 14. "    MMC_VOLT_REG_14                      ,Support for 1.2V bit 14" "Not supported,Supported"
bitfld.long 0x08 13. "      MMC_VOLT_REG_13      ,Support for 1.2V bit 13" "Not supported,Supported"
newline
bitfld.long 0x08 12. " MMC_VOLT_REG_12                     ,Support for 1.2V bit 12" "Not supported,Supported"
bitfld.long 0x08 11. "    MMC_VOLT_REG_11                      ,Support for 1.2V bit 11" "Not supported,Supported"
bitfld.long 0x08 10. "      MMC_VOLT_REG_10      ,Support for 1.2V bit 10" "Not supported,Supported"
newline
bitfld.long 0x08 9. " MMC_VOLT_REG_9                      ,Support for 1.2V bit 9" "Not supported,Supported"
bitfld.long 0x08 8. "    MMC_VOLT_REG_8                       ,Support for 1.2V bit 8" "Not supported,Supported"
bitfld.long 0x08 7. "      MMC_VOLT_REG_7       ,Support for 1.2V bit 7" "Not supported,Supported"
newline
bitfld.long 0x08 6. " MMC_VOLT_REG_6                      ,Support for 1.2V bit 6" "Not supported,Supported"
bitfld.long 0x08 5. "    MMC_VOLT_REG_5                       ,Support for 1.2V bit 5" "Not supported,Supported"
bitfld.long 0x08 4. "      MMC_VOLT_REG_4       ,Support for 1.2V bit 4" "Not supported,Supported"
newline
bitfld.long 0x08 3. " MMC_VOLT_REG_3                      ,Support for 1.2V bit 3" "Not supported,Supported"
bitfld.long 0x08 2. "    MMC_VOLT_REG_2                       ,Support for 1.2V bit 2" "Not supported,Supported"
bitfld.long 0x08 1. "      MMC_VOLT_REG_1       ,Support for 1.2V bit 1" "Not supported,Supported"
newline
bitfld.long 0x08 0. " MMC_VOLT_REG_0                      ,Support for 1.2V bit 0" "Not supported,Supported"
if (((per.l(ad:0xFF808000+0x10C))&0x80000000)==0x80000000)
group.long 0x10C++0x03
line.long 0x00 "EMMC_DDR_REG,EMMC DDR Register"
rbitfld.long 0x00 31. " HS400_MODE                          ,HS400 mode enable" "Disabled,Enabled"
else
group.long 0x10C++0x03
line.long 0x00 "EMMC_DDR_REG,EMMC DDR Register"
rbitfld.long 0x00 31. " HS400_MODE                          ,HS400 mode enable" "Disabled,Enabled"
bitfld.long 0x00 0. "         HALF_START_BIT_0                     ,Start bit detection control enable" "Disabled,Enabled"
endif
group.long 0x110++0x03
line.long 0x00 "ENABLE_SHIFT,Enable Phase Shift Register"
bitfld.long 0x00 0.--1. " ENABLE_SHIFT_CARD0                  ,Phase shift amount control" "Default,Next posedge,Next negedge,?..."
newline
hgroup.long 0x200++0x03
hide.long 0x00 "DATA,DATA FIFO Access"
in
width 0x0B
tree.end
tree.open "EMAC (Ethernet Media Access Controller)"
tree "EMAC0"
base ad:0xFF800000
width 28.
group.long 0x00++0x07
line.long 0x00 "GMACGRP_MAC_CONFIGURATION,MAC Configuration Register"
bitfld.long 0x00 30. " SARC[2]            ,Source address selection" "0,1"
bitfld.long 0x00 28.--29. "                          SARC[1:0]          ,Source address operation type selection" "0,1,2,3"
bitfld.long 0x00 27. "                         TWOKPE             ,IEEE 802.3as support for 2k packets" "Not supported,Supported"
newline
bitfld.long 0x00 26. " SFTERR             ,SMII force transmit error" "Not forced,Forced"
bitfld.long 0x00 25. "                 CST                ,CRC stripping for type frames" "Disabled,Enabled"
bitfld.long 0x00 24. "                  TC                 ,Transmit configuration in RGMI/SGMII/SMII" "Disabled,Enabled"
newline
bitfld.long 0x00 23. " WD                 ,Watchdog disable" "No,Yes"
bitfld.long 0x00 22. "                        JD                 ,Jabber disable" "No,Yes"
bitfld.long 0x00 21. "                       BE                 ,Frame burst enable" "Disabled,Enabled"
newline
bitfld.long 0x00 20. " JE                 ,Jumbo frame enable" "Disabled,Enabled"
bitfld.long 0x00 17.--19. "                   IFG                ,Inter-frame gap" "IFG96BITTIMES,IFG88BITTIMES,IFG80BITTIMES,IFG72BITTIMES,IFG64BITTIMES,IFG56BITTIMES,IFG48BITTIMES,IFG40BITTIMES"
bitfld.long 0x00 16. "             DCRS               ,Disable carrier sense during transmission" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " PS                 ,Port select" "GMII1000SEL,MII10100SEL"
bitfld.long 0x00 14. "                FES                ,Speed select" "SPEED10,SPEED100"
bitfld.long 0x00 13. "                  DO                 ,Disable receive own" "No,Yes"
newline
bitfld.long 0x00 12. " LM                 ,Loopback mode" "Disabled,Enabled"
bitfld.long 0x00 11. "                   DM                 ,Duplex mode" "Disabled,Enabled"
bitfld.long 0x00 10. "                  IPC                ,Checksum offload" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " DR                 ,Disable retry" "No,Yes"
bitfld.long 0x00 8. "                        LUD                ,Link up or down" "Down,Up"
bitfld.long 0x00 7. "                      ACS                ,Automatic pad or CRC stripping" "Disabled,Enabled"
newline
bitfld.long 0x00 5.--6. " L                  ,Back-off limit" "BACKLIMTR10,BACKLIMTR8,BACKLIMTR4,BACKLIMTR1"
bitfld.long 0x00 4. "                BDC                ,Deferral check" "Disabled,Enabled"
bitfld.long 0x00 3. "                  TE                 ,Transmitter enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " RE                 ,Receiver enable" "Disabled,Enabled"
bitfld.long 0x00 0.--1. "                   PRELEN             ,Preamble length for transmit frames" "PREAM7BYTES,PREAM5BYTES,PREAM3BYTES,PREAM1BYTES"
line.long 0x04 "GMACGRP_MAC_FRAME_FILTER,MAC Frame Filter"
bitfld.long 0x04 31. " RA                 ,Receive all" "Disabled,Enabled"
bitfld.long 0x04 21. "                   DNTU               ,Drop non-TCP/UDP over IP frames" "Disabled,Enabled"
bitfld.long 0x04 20. "                  IPFE               ,Layer 3 and layer 4 filter enable" "Not dropped,Dropped"
newline
bitfld.long 0x04 16. " VTFE               ,VLAN tag filter enable" "Not dropped,Dropped"
bitfld.long 0x04 10. "                HPF                ,Hash or perfect filter" "Disabled,Enabled"
bitfld.long 0x04 9. "                  SAF                ,Source address filter enable" "Disabled,Enabled"
newline
bitfld.long 0x04 8. " SAIF               ,SA inverse filtering" "Disabled,Enabled"
bitfld.long 0x04 6.--7. "                   PCF                ,Pass control frames" "MACFLTALLCFR,MACFWDXPAUSE,MACFWDFAIL,MACFWDPASS"
bitfld.long 0x04 5. "              DBF                ,Disable broadcast frames" "Disabled,Enabled"
newline
bitfld.long 0x04 4. " PM                 ,Pass all multicast" "Disabled,Enabled"
bitfld.long 0x04 3. "                   DAIF               ,DA inverse filtering" "Disabled,Enabled"
bitfld.long 0x04 2. "                  HMC                ,Hash multicast" "Disabled,Enabled"
newline
bitfld.long 0x04 1. " HUC                ,Hash unicast" "Disabled,Enabled"
bitfld.long 0x04 0. "                   PR                 ,Promiscuous mode" "Disabled,Enabled"
group.long 0x10++0x0F
line.long 0x00 "GMACGRP_GMII_ADDRESS,GMII Address Register"
bitfld.long 0x00 11.--15. " PA                 ,Physical layer address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--10. "                         GR                 ,GMII register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 2.--5. "                        CR                 ,CSR clock range" "DIV42,DIV62,DIV16,DIV26,DIV102,DIV124,,,DIV4,DIV6,DIV8,DIV10,DIV12,DIV14,DIV16,DIV18"
newline
bitfld.long 0x00 1. " GW                 ,GMII write" "Disabled,Enabled"
bitfld.long 0x00 0. "                   GB                 ,GMII busy" "Disabled,Enabled"
line.long 0x04 "GMACGRP_GMII_DATA,GMII Data Register"
hexmask.long.word 0x04 0.--15. 1. " GD                 ,GMII data"
line.long 0x08 "GMACGRP_FLOW_CONTROL,Flow Control Register"
hexmask.long.word 0x08 16.--31. 1. " PT                 ,Pause time"
bitfld.long 0x08 7. "                       DZPQ               ,Disable zero-quanta pause" "Disabled,Enabled"
bitfld.long 0x08 4.--5. "                  PLT                ,Pause low threshold" "PAUSETIME_4,PAUSETIME_28,PAUSETIME_144,PAUSETIME_256"
newline
bitfld.long 0x08 3. " UP                 ,Unicast pause frame detect" "Disabled,Enabled"
bitfld.long 0x08 2. "                   RFE                ,Receive flow control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "                  TFE                ,Transmit flow control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. " FCA_BPA            ,Flow control busy or backpressure activate" "Disabled,Enabled"
line.long 0x0C "GMACGRP_VLAN_TAG,VLAN Tag Register"
bitfld.long 0x0C 19. " VTHM               ,VLAN tag hash table match enable" "Disabled,Enabled"
bitfld.long 0x0C 18. "                   ESVL               ,Enable S-VLAN" "Disabled,Enabled"
bitfld.long 0x0C 17. "                  VTIM               ,VLAN tag inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 16. " ETV                ,Enable 12-bit VLAN tag comparison" "Disabled,Enabled"
hexmask.long.word 0x0C 0.--15. 1. "                   VL                 ,VLAN tag identifier for receive frames"
rgroup.long 0x20++0x07
line.long 0x00 "GMACGRP_VERSION,Version Register"
hexmask.long.byte 0x00 8.--15. 1. " USERVER            ,User-defined version"
hexmask.long.byte 0x00 0.--7. 1. "                         SNPSVER            ,Synopsys-defined version"
line.long 0x04 "GMACGRP_DEBUG,Debug Register"
bitfld.long 0x04 25. " TXSTSFSTS          ,MTL TX status FIFO full status" "Inactive,Active"
bitfld.long 0x04 24. "                   TXFSTS             ,MTL TX FIFO not empty status" "Inactive,Active"
bitfld.long 0x04 22. "                  TWCSTS             ,MTL TX FIFO write controller active status" "Inactive,Active"
newline
bitfld.long 0x04 20.--21. " TRCSTS             ,MTL TX FIFO read controller status" "IDLE,READSTATE,WAITTXSTAT,WRTXSTAT"
bitfld.long 0x04 19. "                 TXPAUSED           ,MAC transmitter in pause" "Disabled,Enabled"
bitfld.long 0x04 17.--18. "                  TFCSTS             ,MAC transmit frame controller status" "IDLE,WAITIFG,XTPAUSE,XTINFRM"
newline
bitfld.long 0x04 16. " TPESTS             ,MAC GMII or MII transmit protocol engine status" "Disabled,Enabled"
bitfld.long 0x04 8.--9. "                   RXFSTS             ,MTL RX FIFO fill-level status" "RXFIFOEMPTY,RXFIFOBELLVL,RXFIFOABLVL,RXFIFOFULL"
bitfld.long 0x04 5.--6. "              RRCSTS             ,MTL RX FIFO read controller state" "IDLE,RDFRAMEDATA,RDFRAMESTAT,FLUSHFRDS"
newline
bitfld.long 0x04 4. " RWCSTS             ,MTL RX FIFO write controller active status" "Inactive,Active"
bitfld.long 0x04 2. "                   RFCFCSTS[1]        ,MAC receive frame controller FIFO status" "Inactive,Active"
bitfld.long 0x04 1. "                  RFCFCSTS[0]        ,MAC receive frame controller FIFO status" "Inactive,Active"
newline
bitfld.long 0x04 0. " RPESTS             ,MAC GMII or MII receive protocol engine status" "Inactive,Active"
group.long 0x30++0x07
line.long 0x00 "GMACGRP_LPI_CONTROL_STATUS,LPI Control And Status Register"
bitfld.long 0x00 19. " LPITXA             ,LPI TX automate" "Disabled,Enabled"
bitfld.long 0x00 18. "                   PLSEN              ,PHY link status enable" "Disabled,Enabled"
bitfld.long 0x00 17. "                  PLS                ,PHY link status" "Disabled,Enabled"
newline
bitfld.long 0x00 16. " LPIEN              ,LPI enable" "Disabled,Enabled"
bitfld.long 0x00 9. "                   RLPIST             ,Receive LPI state" "Inactive,Active"
bitfld.long 0x00 8. "                  TLPIST             ,Transmit LPI state" "Inactive,Active"
newline
bitfld.long 0x00 3. " RLPIEX             ,Receive LPI exit" "Inactive,Active"
bitfld.long 0x00 2. "                   RLPIEN             ,Receive LPI entry" "Inactive,Active"
bitfld.long 0x00 1. "                  TLPIEX             ,Transmit LPI exit" "Inactive,Active"
newline
bitfld.long 0x00 0. " TLPIEN             ,Transmit LPI entry" "Inactive,Active"
line.long 0x04 "GMACGRP_LPI_TIMERS_CONTROL,LPI Timers Control Register"
hexmask.long.word 0x04 16.--25. 1. " LST                ,LPI LS timer"
hexmask.long.word 0x04 0.--15. 1. "                       LWT                ,LPI TW timer"
rgroup.long 0x38++0x03
line.long 0x00 "GMACGRP_INTERRUPT_STATUS,Interrupt Register"
bitfld.long 0x00 11. " GPIIS              ,GPI interrupt status" "Inactive,Active"
bitfld.long 0x00 10. "                   LPIIS              ,LPI interrupt status" "Inactive,Active"
bitfld.long 0x00 9. "                  TSIS               ,Timestamp interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 7. " MMCRXIPIS          ,MMC receive checksum offload interrupt status" "Inactive,Active"
bitfld.long 0x00 6. "                   MMCTXIS            ,MMC transmit interrupt status" "Inactive,Active"
bitfld.long 0x00 5. "                  MMCRXIS            ,MMC receive interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x00 4. " MMCIS              ,MMC interrupt status" "Inactive,Active"
bitfld.long 0x00 3. "                   PMTIS              ,PMT interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 2. "              PCSANCIS           ,PCS auto-negotiation complete" "Not completed,Completed"
newline
bitfld.long 0x00 1. " PCSLCHGIS          ,PCS link status changed" "Not changed,Changed"
bitfld.long 0x00 0. "                RGSMIIIS           ,RGMII or SMII interrupt status" "Inactive,Active"
group.long 0x3C++0x03
line.long 0x00 "GMACGRP_INTERRUPT_MASK,Interrupt Mask Register"
bitfld.long 0x00 10. " LPIIM              ,LPI interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 9. "                   TSIM               ,Timestamp interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 3. "                  PMTIM              ,PMT interrupt mask" "Unmasked,Masked"
newline
bitfld.long 0x00 2. " PCSANCIM           ,PCS an completion interrupt mask" "Unmasked,Masked"
bitfld.long 0x00 1. "                   PCSLCHGIM          ,PCS link status interrupt mask" "Unmasked,Masked"
bitfld.long 0x00 0. "                  RGSMIIIM           ,RGMII or SMII interrupt mask" "Inactive,Active"
tree "GMACGRP_MAC_ADDRESS Registers"
group.long 0x40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS0_HIGH,MAC Address0 High Register"
rbitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address0 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS0_LOW,MAC Address0 Low Register"
group.long 0x48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS1_HIGH,MAC Address1 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address1 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS1_LOW,MAC Address1 Low Register"
group.long 0x50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS2_HIGH,MAC Address2 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address2 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS2_LOW,MAC Address2 Low Register"
group.long 0x58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS3_HIGH,MAC Address3 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address3 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS3_LOW,MAC Address3 Low Register"
group.long 0x60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS4_HIGH,MAC Address4 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address4 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS4_LOW,MAC Address4 Low Register"
group.long 0x68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS5_HIGH,MAC Address5 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address5 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS5_LOW,MAC Address5 Low Register"
group.long 0x70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS6_HIGH,MAC Address6 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address6 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS6_LOW,MAC Address6 Low Register"
group.long 0x78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS7_HIGH,MAC Address7 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address7 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS7_LOW,MAC Address7 Low Register"
group.long 0x80++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS8_HIGH,MAC Address8 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address8 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS8_LOW,MAC Address8 Low Register"
group.long 0x88++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS9_HIGH,MAC Address9 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address9 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS9_LOW,MAC Address9 Low Register"
group.long 0x90++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS10_HIGH,MAC Address10 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address10 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS10_LOW,MAC Address10 Low Register"
group.long 0x98++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS11_HIGH,MAC Address11 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address11 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS11_LOW,MAC Address11 Low Register"
group.long 0xA0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS12_HIGH,MAC Address12 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address12 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS12_LOW,MAC Address12 Low Register"
group.long 0xA8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS13_HIGH,MAC Address13 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address13 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS13_LOW,MAC Address13 Low Register"
group.long 0xB0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS14_HIGH,MAC Address14 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address14 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS14_LOW,MAC Address14 Low Register"
group.long 0xB8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS15_HIGH,MAC Address15 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address15 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS15_LOW,MAC Address15 Low Register"
tree.end
newline
width 42.
rgroup.long 0xD8++0x03
line.long 0x00 "GMACGRP_SGMII_RGMII_SMII_CONTROL_STATUS,SGMII/RGMII/SMII Status Register"
bitfld.long 0x00 3. " LNKSTS             ,This bit indicates whether the link is up or down" "LINKDOWN,LINKUP"
bitfld.long 0x00 1.--2. "                   LNKSPEED           ,This bit indicates the current speed of the link" "SPEED2POINT5MHZ,SPEED25MHZ,SPEED125MHZ,?..."
bitfld.long 0x00 0. "           LNKMOD             ,This bit indicates the current mode of operation of the link" "HALFDUP,FULLDUP"
group.long 0x100++0x03
line.long 0x00 "GMACGRP_MMC_CONTROL,MMC Control Register"
bitfld.long 0x00 8. " UCDBC              ,Update MMC counters for dropped broadcast frames" "Not updated,Updated"
bitfld.long 0x00 5. "                CNTPRSTLVL         ,Full-half preset" "ALMOSTHALF,ALMOSTFULL"
bitfld.long 0x00 4. "                CNTPRST            ,Counters preset" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " CNTFREEZ           ,MMC counter freeze" "Disabled,Enabled"
bitfld.long 0x00 2. "                   RSTONRD            ,Reset on read" "Disabled,Enabled"
bitfld.long 0x00 1. "                  CNTSTOPRO          ,Counters stop rollover" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " CNTRST             ,Counters reset" "Disabled,Enabled"
rgroup.long 0x104++0x07
line.long 0x00 "GMACGRP_MMC_RECEIVE_INTERRUPT,MMC Receive Interrupt Register"
bitfld.long 0x00 25. " RXCTRLFIS          ,MMC receive control frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 24. "                   RXRCVERRFIS        ,MMC receive error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 23. "                  RXWDOGFIS          ,MMC receive watchdog error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 22. " RXVLANGBFIS        ,MMC receive VLAN good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 21. "                   RXFOVFIS           ,MMC receive FIFO overflow frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 20. "                  RXPAUSFIS          ,MMC receive pause frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 19. " RXORANGEFIS        ,MMC receive out of range error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 18. "                   RXLENERFIS         ,MMC receive length error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 17. "                  RXUCGFIS           ,MMC receive unicast good frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 16. " RX1024TMAXOCTGBFIS ,MMC receive 1024 to maximum octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 15. "                   RX512T1023OCTGBFIS ,MMC receive 512 to 1023 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 14. "                  RX256T511OCTGBFIS  ,MMC receive 256 to 511 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 13. " RX128T255OCTGBFIS  ,MMC receive 128 to 255 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 12. "                   RX65T127OCTGBFIS   ,MMC receive 65 to 127 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 11. "                  RX64OCTGBFIS       ,MMC receive 64 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 10. " RXOSIZEGFIS        ,MMC receive oversize good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 9. "                   RXUSIZEGFIS        ,MMC receive undersize good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 8. "                  RXJABERFIS         ,MMC receive jabber error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 7. " RXRUNTFIS          ,MMC receive runt frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 6. "                   RXALGNERFIS        ,MMC receive alignment error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 5. "                  RXCRCERFIS         ,MMC receive CRC error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 4. " RXMCGFIS           ,MMC receive multicast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 3. "                   RXBCGFIS           ,MMC receive broadcast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 2. "                  RXGOCTIS           ,MMC receive good octet counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 1. " RXGBOCTIS          ,MMC receive good bad octet counter interrupt status" "Inactive,Active"
bitfld.long 0x00 0. "                   RXGBFRMIS          ,MMC receive good bad frame counter interrupt status" "ALMOSTHALF,ALMOSTFULL"
line.long 0x04 "GMACGRP_MMC_TRANSMIT_INTERRUPT,MMC Transmit Interrupt Register"
bitfld.long 0x04 25. " TXOSIZEGFIS        ,MMC transmit oversize good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 24. "                   TXVLANGFIS         ,MMC transmit VLAN good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 23. "                  TXPAUSFIS          ,MMC transmit pause frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 22. " TXEXDEFFIS         ,MMC transmit excessive deferral frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 21. "                   TXGFRMIS           ,MMC transmit good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 20. "                  TXGOCTIS           ,MMC transmit good octet counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 19. " TXCARERFIS         ,MMC transmit carrier error frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 18. "                   TXEXCOLFIS         ,MMC transmit excessive collision frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 17. "                  TXLATCOLFIS        ,MMC transmit late collision frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 16. " TXDEFFIS           ,MMC transmit deferred frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 15. "                   TXMCOLGFIS         ,MMC transmit multiple collision good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 14. "                  TXSCOLGFIS         ,MMC transmit single collision good frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 13. " TXUFLOWERFIS       ,MMC transmit underflow error frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 12. "                   TXBCGBFIS          ,MMC transmit broadcast good bad frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 11. "                  TXMCGBFIS          ,MMC transmit multicast good bad frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 10. " TXUCGBFIS          ,MMC transmit unicast good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 9. "                   TX1024TMAXOCTGBFIS ,MMC transmit 1024 to maximum octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 8. "                  TX512T1023OCTGBFIS ,MMC transmit 512 to 1023 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 7. " TX256T511OCTGBFIS  ,MMC transmit 256 to 511 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 6. "                   TX128T255OCTGBFIS  ,MMC transmit 128 to 255 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 5. "                  TX65T127OCTGBFIS   ,MMC transmit 65 to 127 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 4. " TX64OCTGBFIS       ,MMC transmit 64 octet good bad frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 3. "                   TXMCGFIS           ,MMC transmit multicast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 2. "                  TXBCGFIS           ,MMC transmit broadcast good frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 1. " TXGBFRMIS          ,MMC transmit good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 0. "                   TXGBOCTIS          ,MMC transmit good bad octet counter interrupt status" "Inactive,Active"
group.long 0x10C++0x07
line.long 0x00 "GMACGRP_MMC_RECEIVE_INTERRUPT_MASK,MMC Receive Interrupt Mask Register"
bitfld.long 0x00 25. " RXCTRLFIM          ,MMC receive control frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 24. "                 RXRCVERRFIM        ,MMC receive error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 23. "                RXWDOGFIM          ,MMC Receive watchdog error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 22. " RXVLANGBFIM        ,MMC receive VLAN good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 21. "                 RXFOVFIM           ,MMC receive FIFO overflow frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 20. "                RXPAUSFIM          ,MMC receive pause frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 19. " RXORANGEFIM        ,MMC receive out of range error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 18. "                 RXLENERFIM         ,MMC receive length error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 17. "                RXUCGFIM           ,MMC receive unicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 16. " RX1024TMAXOCTGBFIM ,MMC receive 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 16. "                 RX1024TMAXOCTGBFIM ,MMC receive 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 15. "                RX512T1023OCTGBFIM ,MMC receive 512 to 1023 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 14. " RX256T511OCTGBFIM  ,MMC receive 256 to 511 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 13. "                 RX128T255OCTGBFIM  ,MMC receive 128 to 255 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 12. "                RX65T127OCTGBFIM   ,MMC receive 65 to 127 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 11. " RX64OCTGBFIM       ,MMC receive 64 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 10. "                 RXOSIZEGFIM        ,MMC receive oversize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 9. "                RXUSIZEGFIM        ,MMC receive undersize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 8. " RXJABERFIM         ,MMC receive jabber error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 7. "                 RXRUNTFIM          ,MMC receive runt frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 6. "                RXALGNERFIM        ,MMC receive alignment error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 5. " RXCRCERFIM         ,MMC receive CRC error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 4. "                 RXMCGFIM           ,MMC receive multicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 3. "                RXBCGFIM           ,MMC receive broadcast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 2. " RXGOCTIM           ,MMC receive good octet counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 1. "                 RXGBOCTIM          ,MMC receive good bad octet counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 0. "                RXGBFRMIM          ,MMC receive good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
line.long 0x04 "GMACGRP_MMC_TRANSMIT_INTERRUPT_MASK,MMC Transmit Interrupt Mask Register"
bitfld.long 0x04 25. " TXOSIZEGFIM        ,MMC transmit oversize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 24. "                 TXVLANGFIM         ,MMC transmit VLAN good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 23. "                TXPAUSFIM          ,MMC transmit pause frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 22. " TXEXDEFFIM         ,MMC transmit excessive deferral frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 21. "                 TXGFRMIM           ,MMC transmit good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 20. "                TXGOCTIM           ,MMC transmit good octet counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 19. " TXCARERFIM         ,MMC transmit carrier error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 18. "                 TXEXCOLFIM         ,MMC transmit excessive collision frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 17. "                TXLATCOLFIM        ,MMC transmit late collision frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 16. " TXDEFFIM           ,MMC transmit deferred frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 15. "                 TXMCOLGFIM         ,MMC transmit multiple collision good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 14. "                TXSCOLGFIM         ,MMC transmit single collision good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 13. " TXUFLOWERFIM       ,MMC transmit underflow error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 12. "                 TXBCGBFIM          ,MMC transmit broadcast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 11. "                TXMCGBFIM          ,MMC transmit multicast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 10. " TXUCGBFIM          ,MMC transmit unicast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 9. "                 TX1024TMAXOCTGBFIM ,MMC transmit 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 8. "                TX512T1023OCTGBFIM ,MMC transmit 512 to 1023 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 7. " TX256T511OCTGBFIM  ,MMC transmit 256 to 511 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 6. "                 TX128T255OCTGBFIM  ,MMC transmit 128 to 255 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 5. "                TX65T127OCTGBFIM   ,MMC transmit 65 to 127 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 4. " TX64OCTGBFIM       ,MMC transmit 64 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 3. "                 TXMCGFIM           ,MMC transmit multicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 2. "                TXBCGFIM           ,MMC transmit broadcast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 1. " TXGBFRMIM          ,MMC transmit good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 0. "                 TXGBOCTIM          ,MMC transmit good bad octet counter interrupt mask" "NOMASKINTR,MASKINTR"
rgroup.long 0x114++0x67
line.long 0x00 "GMACGRP_TXOCTETCOUNT_GB,Transmit Octet Count For Good and Bad Frames"
line.long 0x04 "GMACGRP_TXFRAMECOUNT_GB,Transmit Frame Count For Good And Bad Frames"
line.long 0x08 "GMACGRP_TXBROADCASTFRAMES_G,Transmit Frame Count For Good Broadcast Frames"
line.long 0x0C "GMACGRP_TXMULTICASTFRAMES_G,Transmit Frame Count For Good Multicast Frames"
line.long 0x10 "GMACGRP_TX64OCTETS_GB,Transmit Octet Count For Good And Bad 64 Byte Frames"
line.long 0x14 "GMACGRP_TX65TO127OCTETS_GB,Transmit Octet Count For Good And Bad 65 To 127 Bytes Frames"
line.long 0x18 "GMACGRP_TX128TO255OCTETS_GB,Transmit Octet Count For Good And Bad 128 To 255 Bytes Frames"
line.long 0x1C "GMACGRP_TX256TO511OCTETS_GB,Transmit Octet Count For Good And Bad 256 To 511 Bytes Frames"
line.long 0x20 "GMACGRP_TX512TO1023OCTETS_GB,Transmit Octet Count For Good And Bad 512 To 1023 Bytes Frames"
line.long 0x24 "GMACGRP_TX1024TOMAXOCTETS_GB,Transmit Octet Count For Good And Bad 1024 To Maxsize Bytes Frames"
line.long 0x28 "GMACGRP_TXUNICASTFRAMES_GB,Transmit Frame Count For Good And Bad Unicast Frames"
line.long 0x2C "GMACGRP_TXMULTICASTFRAMES_GB,Transmit Frame Count For Good And Bad Multicast Frames"
line.long 0x30 "GMACGRP_TXBROADCASTFRAMES_GB,Transmit Frame Count For Good And Bad Broadcast Frames"
line.long 0x34 "GMACGRP_TXUNDERFLOWERROR,Transmit Frame Count For Underflow Error Frames"
line.long 0x38 "GMACGRP_TXSINGLECOL_G,Transmit Frame Count For Frames Transmitted After Single Collision"
line.long 0x3C "GMACGRP_TXMULTICOL_G,Transmit Frame Count For Frames Transmitted After Multiple Collision"
line.long 0x40 "GMACGRP_TXDEFERRED,Transmit Frame Count For Deferred Frames"
line.long 0x44 "GMACGRP_TXLATECOL,Transmit Frame Count For Late Collision Error Frames"
line.long 0x48 "GMACGRP_TXEXESSCOL,Transmit Frame Count For Excessive Collision Error Frames"
line.long 0x4C "GMACGRP_TXCARRIERERR,Transmit Frame Count For Carrier Sense Error Frames"
line.long 0x50 "GMACGRP_TXOCTETCNT,Transmit Octet Count For Good Frames"
line.long 0x54 "GMACGRP_TXFRAMECOUNT_G,Transmit Frame Count For Good Frames"
line.long 0x58 "GMACGRP_TXEXCESSDEF,Transmit Frame Count For Excessive Deferral Error Frames"
line.long 0x5C "GMACGRP_TXPAUSEFRAMES,Transmit Frame Count For Good PAUSE Frames"
line.long 0x60 "GMACGRP_TXVLANFRAMES_G,Transmit Frame Count For Good VLAN Frames"
line.long 0x64 "GMACGRP_TXOVERSIZE_G,Transmit Frame Count For Good Oversize Frames"
rgroup.long 0x180++0x67
line.long 0x00 "GMACGRP_RXFRAMECOUNT_GB,Receive Frame Count For Good And Bad Frames"
line.long 0x04 "GMACGRP_RXOCTETCOUNT_GB,Receive Octet Count For Good And Bad Frames"
line.long 0x08 "GMACGRP_RXOCTETCOUNT_G,Receive Octet Count For Good Frames"
line.long 0x0C "GMACGRP_RXBROADCASTFRAMES_G,Receive Frame Count For Good Broadcast Frames"
line.long 0x10 "GMACGRP_RXMULTICASTFRAMES_G,Receive Frame Count For Good Multicast Frames"
line.long 0x14 "GMACGRP_RXCRCERROR,Receive Frame Count For CRC Error Frames"
line.long 0x18 "GMACGRP_RXALIGNMENTERROR,Receive Frame Count For Alignment Error Frames"
line.long 0x1C "GMACGRP_RXRUNTERROR,Receive Frame Count For Runt Error Frames"
line.long 0x20 "GMACGRP_RXJABBERERROR,Receive Frame Count For Jabber Error Frames"
line.long 0x24 "GMACGRP_RXUNDERSIZE_G,Receive Frame Count For Undersize Frames"
line.long 0x28 "GMACGRP_RXOVERSIZE_G,Receive Frame Count For Oversize Frames"
line.long 0x2C "GMACGRP_RX64OCTETS_GB,Receive Frame Count For Good And Bad 64 Byte Frames"
line.long 0x30 "GMACGRP_RX65TO127OCTETS_GB,Receive Frame Count For Good And Bad 65 To 127 Bytes Frames"
line.long 0x34 "GMACGRP_RX128TO255OCTETS_GB,Receive Frame Count For Good And Bad 128 To 255 Bytes Frames"
line.long 0x38 "GMACGRP_RX256TO511OCTETS_GB,Receive Frame Count For Good And Bad 256 To 511 Bytes Frames"
line.long 0x3C "GMACGRP_RX512TO1023OCTETS_GB,Receive Frame Count For Good And Bad 512 To 1023 Bytes Frames"
line.long 0x40 "GMACGRP_RX1024TOMAXOCTETS_GB,Receive Frame Count For Good And Bad 1024 To Maxsize Bytes Frames"
line.long 0x44 "GMACGRP_RXUNICASTFRAMES_G,Receive Frame Count For Good Unicast Frames"
line.long 0x48 "GMACGRP_RXLENGTHERROR,Receive Frame Count For Length Error Frames"
line.long 0x4C "GMACGRP_RXOUTOFRANGETYPE,Receive Frame Count For Out Of Range Frames"
line.long 0x50 "GMACGRP_RXPAUSEFRAMES,Receive Frame Count For PAUSE Frames"
line.long 0x54 "GMACGRP_RXFIFOOVERFLOW,Receive Frame Count For FIFO Overflow Frames"
line.long 0x58 "GMACGRP_RXVLANFRAMES_GB,Receive Frame Count For Good and Bad VLAN Frames"
line.long 0x5C "GMACGRP_RXWATCHDOGERROR,Receive Frame Count For Watchdog Error Frames"
line.long 0x60 "GMACGRP_RXRCVERROR,Receive Frame Count For Receive Error Frames"
line.long 0x64 "GMACGRP_RXCTRLFRAMES_G,Receive Frame Count For Good Control Frames Frames"
group.long 0x200++0x03
line.long 0x00 "GMACGRP_MMC_IPC_RECEIVE_INTERRUPT_MASK,MMC Receive Checksum Offload Interrupt Mask Register"
bitfld.long 0x00 29. " RXICMPEROIM        ,Setting this bit masks the interrupt when the RXICMP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 28. "                 RXICMPGOIM         ,Setting this bit masks the interrupt when the RXICMP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 27. "                RXTCPEROIM         ,Setting this bit masks the interrupt when the RXTCP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 26. " RXTCPGOIM          ,Setting this bit masks the interrupt when the RXTCP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 25. "                 RXUDPEROIM         ,Setting this bit masks the interrupt when the RXUDP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 24. "                RXUDPGOIM          ,Setting this bit masks the interrupt when the RXUDP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 23. " RXIPV6NOPAYOIM     ,Setting this bit masks the interrupt when the RXIPV6_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 22. "                 RXIPV6HEROIM       ,Setting this bit masks the interrupt when the RXIPV6_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 21. "                RXIPV6GOIM         ,Setting this bit masks the interrupt when the RXIPV6_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 20. " RXIPV4UDSBLOIM     ,Setting this bit masks the interrupt when the RXIPV4_UDSBL_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 19. "                 RXIPV4FRAGOIM      ,Setting this bit masks the interrupt when the RXIPV4_FRAG_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 18. "                RXIPV4NOPAYOIM     ,Setting this bit masks the interrupt when the RXIPV4_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 17. " RXIPV4HEROIM       ,Setting this bit masks the interrupt when the RXIPV4_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 16. "                 RXIPV4GOIM         ,Setting this bit masks the interrupt when the RXIPV4_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 13. "                RXICMPERFIM        ,Setting this bit masks the interrupt when the RXICMP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 12. " RXICMPGFIM         ,Setting this bit masks the interrupt when the RXICMP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 11. "                 RXTCPERFIM         ,Setting this bit masks the interrupt when the RXTCP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 10. "                RXTCPGFIM          ,Setting this bit masks the interrupt when the RXTCP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 9. " RXUDPERFIM         ,Setting this bit masks the interrupt when the RXUDP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 8. "                 RXUDPGFIM          ,Setting this bit masks the interrupt when the RXUDP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 7. "                RXIPV6NOPAYFIM     ,Setting this bit masks the interrupt when the RXIPV6_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 6. " RXIPV6HERFIM       ,Setting this bit masks the interrupt when the RXIPV6_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 5. "                 RXIPV6GFIM         ,Setting this bit masks the interrupt when the RXIPV6_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 4. "                RXIPV4UDSBLFIM     ,Setting this bit masks the interrupt when the RXIPV4_UDSBL_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 3. " RXIPV4FRAGFIM      ,Setting this bit masks the interrupt when the RXIPV4_FRAG_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 2. "                 RXIPV4NOPAYFIM     ,Setting this bit masks the interrupt when the RXIPV4_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 1. "                RXIPV4HERFIM       ,Setting this bit masks the interrupt when the RXIPV4_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 0. " RXIPV4GFIM         ,Setting this bit masks the interrupt when the RXIPV4_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
rgroup.long 0x208++0x03
line.long 0x00 "GMACGRP_MMC_IPC_RECEIVE_INTERRUPT,MMC Receive Checksum Offload Interrupt Register"
bitfld.long 0x00 29. " RXICMPEROIS        ,This bit is set the RXICMP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 28. "               RXICMPGOIS         ,This bit is set the RXICMP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 27. "              RXTCPEROIS         ,This bit is set the RXTCP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 26. " RXTCPGOIS          ,This bit is set the RXTCP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 25. "               RXUDPEROIS         ,This bit is set the RXUDP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 24. "              RXUDPGOIS          ,This bit is set the RXUDP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. " RXIPV6NOPAYOIS     ,This bit is set the RXIPV6_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 22. "               RXIPV6HEROIS       ,This bit is set the RXIPV6_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 21. "              RXIPV6GOIS         ,This bit is set the RXIPV6_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 20. " RXIPV4UDSBLOIS     ,This bit is set the RXIPV4_UDSBL_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 19. "               RXIPV4FRAGOIS      ,This bit is set the RXIPV4_FRAG_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 18. "              RXIPV4NOPAYOIS     ,This bit is set the RXIPV4_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 17. " RXIPV4HEROIS       ,This bit is set the RXIPV4_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 16. "               RXIPV4GOIS         ,This bit is set the RXIPV4_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 13. "              RXICMPERFIS        ,This bit is set the RXICMP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " RXICMPGFIS         ,This bit is set the RXICMP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 11. "               RXTCPERFIS         ,This bit is set the RXTCP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 10. "              RXTCPGFIS          ,This bit is set the RXTCP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 9. " RXUDPERFIS         ,This bit is set the RXUDP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 8. "               RXUDPGFIS          ,This bit is set the RXUDP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 7. "              RXIPV6NOPAYFIS     ,This bit is set the RXIPV6_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " RXIPV6HERFIS       ,This bit is set the RXIPV6_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 5. "               RXIPV6GFIS         ,This bit is set the RXIPV6_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 4. "              RXIPV4UDSBLFIS     ,This bit is set the RXIPV4_UDSBL_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " RXIPV4FRAGFIS      ,This bit is set the RXIPV4_FRAG_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 2. "               RXIPV4NOPAYFIS     ,This bit is set the RXIPV4_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 1. "              RXIPV4HERFIS       ,This bit is set the RXIPV4_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " RXIPV4GFIS         ,This bit is set the RXIPV4_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
rgroup.long 0x210++0x37
line.long 0x00 "GMACGRP_RXIPV4_GD_FRMS,Number Of Good IPv4 Datagrams Received With The TCP/UDP/ICMP payload"
line.long 0x04 "GMACGRP_RXIPV4_HDRERR_FRMS,Number Of IPv4 Datagrams Received With Header (Checksum/Length/Version Mismatch) Errors"
line.long 0x08 "GMACGRP_RXIPV4_NOPAY_FRMS,Number Of IPv4 Datagram Frames Received That Did Not Have A TCP/UDP/ICMP Payload Processed By The Checksum Engine"
line.long 0x0C "GMACGRP_RXIPV4_FRAG_FRMS,Number Of Good IPv4 Datagrams With Fragmentation"
line.long 0x10 "GMACGRP_RXIPV4_UDSBL_FRMS,Number Of Good IPv4 Datagrams Received That Had A UDP Payload With Checksum Disabled"
line.long 0x14 "GMACGRP_RXIPV6_GD_FRMS,Number Of Good IPv6 Datagrams Received With TCP/UDP/ICMP Payloads"
line.long 0x18 "GMACGRP_RXIPV6_HDRERR_FRMS,Number Of IPv6 Datagrams Received With Header Errors (Length Or Version Mismatch)"
line.long 0x1C "GMACGRP_RXIPV6_NOPAY_FRMS,Number Of IPv6 Datagram Frames Received That Did Not Have A TCP/UDP/ICMP Payload"
line.long 0x20 "GMACGRP_RXUDP_GD_FRMS,Number Of Good IP Datagrams With A Good UDP Payload"
line.long 0x24 "GMACGRP_RXUDP_ERR_FRMS,Number Of Good IP Datagrams Whose UDP Payload Has A Checksum Error"
line.long 0x28 "GMACGRP_RXTCP_GD_FRMS,Number Of Good IP Datagrams With A Good TCP Payload"
line.long 0x2C "GMACGRP_RXTCP_ERR_FRMS,Number Of Good IP Datagrams Whose TCP Payload Has A Checksum Error"
line.long 0x30 "GMACGRP_RXICMP_GD_FRMS,Number Of Good IP Datagrams With A Good ICMP Payload"
line.long 0x34 "GMACGRP_RXICMP_ERR_FRMS,Number Of Good IP Datagrams Whose ICMP Payload Has A Checksum Error"
rgroup.long 0x250++0x37
line.long 0x00 "GMACGRP_RXIPV4_GD_OCTETS,Number Of Bytes Received In Good IPv4 Datagrams Encapsulating TCP/UDP/ICMP Data"
line.long 0x04 "GMACGRP_RXIPV4_HDRERR_OCTETS,Number Of Bytes Received In IPv4 Datagrams With Header Errors (checksum/length/version mismatch)"
line.long 0x08 "GMACGRP_RXIPV4_NOPAY_OCTETS,Number Of Bytes Received In IPv4 Datagrams That Did Not Have a TCP/UDP/ICMP Payload"
line.long 0x0C "GMACGRP_RXIPV4_FRAG_OCTETS,Number Of Bytes Received In Fragmented IPv4 Datagrams"
line.long 0x10 "GMACGRP_RXIPV4_UDSBL_OCTETS,Number Of Bytes Received In a UDP Segment That Had The UDP Checksum Disabled"
line.long 0x14 "GMACGRP_RXIPV6_GD_OCTETS,Number Of Bytes Received In Good IPv6 Datagrams Encapsulating TCP/UDP/ICMPv6 Data"
line.long 0x18 "GMACGRP_RXIPV6_HDRERR_OCTETS,Number Of Bytes Received In IPv6 Datagrams With Header Errors (Length/Version Mismatch)"
line.long 0x1C "GMACGRP_RXIPV6_NOPAY_OCTETS,Number Of Bytes Received In IPv6 Datagrams That Did Not Have A TCP/UDP/ICMP Payload"
line.long 0x20 "GMACGRP_RXUDP_GD_OCTETS,Number Of Bytes Received In A Good UDP Segment"
line.long 0x24 "GMACGRP_RXUDP_ERR_OCTETS,Number Of Bytes Received In A UDP Segment That Had Checksum Errors"
line.long 0x28 "GMACGRP_RXTCP_GD_OCTETS,Number Of Bytes Received In A Good TCP Segment"
line.long 0x2C "GMACGRP_RXTCPERROCTETS,Number Of Bytes Received In A TCP Segment With Checksum Errors"
line.long 0x30 "GMACGRP_RXICMP_GD_OCTETS,Number Of Bytes Received In A Good ICMP Segment"
line.long 0x34 "GMACGRP_RXICMP_ERR_OCTETS,Number Of Bytes Received In An ICMP Segment With Checksum Errors"
width 27.
tree "L3 L4 Control Registers"
group.long 0x400++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL0,Layer 3 And Layer 4 Control Register 0"
bitfld.long 0x00 21. " L4DPIM0            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM0             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM0            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM0             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN0             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM0            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM0            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM0            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM0             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM0            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM0             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN0             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 0"
hexmask.long.word 0x04 16.--31. 1. " L4DP0              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP0              ,Layer 4 source port number field"
group.long (0x400+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG0,Layer 3 Address 0 Register 0"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG0,Layer 3 Address 1 Register 0"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG0,Layer 3 Address 2 Register 0"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG0,Layer 3 Address 3 Register 0"
group.long 0x430++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL1,Layer 3 And Layer 4 Control Register 1"
bitfld.long 0x00 21. " L4DPIM1            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM1             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM1            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM1             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN1             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM1            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM1            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM1            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM1             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM1            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM1             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN1             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 1"
hexmask.long.word 0x04 16.--31. 1. " L4DP1              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP1              ,Layer 4 source port number field"
group.long (0x430+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG1,Layer 3 Address 0 Register 1"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG1,Layer 3 Address 1 Register 1"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG1,Layer 3 Address 2 Register 1"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG1,Layer 3 Address 3 Register 1"
group.long 0x460++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL2,Layer 3 And Layer 4 Control Register 2"
bitfld.long 0x00 21. " L4DPIM2            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM2             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM2            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM2             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN2             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM2            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM2            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM2            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM2             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM2            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM2             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN2             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 2"
hexmask.long.word 0x04 16.--31. 1. " L4DP2              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP2              ,Layer 4 source port number field"
group.long (0x460+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG2,Layer 3 Address 0 Register 2"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG2,Layer 3 Address 1 Register 2"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG2,Layer 3 Address 2 Register 2"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG2,Layer 3 Address 3 Register 2"
group.long 0x490++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL3,Layer 3 And Layer 4 Control Register 3"
bitfld.long 0x00 21. " L4DPIM3            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM3             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM3            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM3             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN3             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM3            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM3            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM3            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM3             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM3            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM3             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN3             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 3"
hexmask.long.word 0x04 16.--31. 1. " L4DP3              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP3              ,Layer 4 source port number field"
group.long (0x490+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG3,Layer 3 Address 0 Register 3"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG3,Layer 3 Address 1 Register 3"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG3,Layer 3 Address 2 Register 3"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG3,Layer 3 Address 3 Register 3"
tree.end
newline
width 40.
group.long 0x500++0x1F
line.long 0x00 "GMACGRP_HASH_TABLE_REG0,Hash Table Register 0"
line.long 0x04 "GMACGRP_HASH_TABLE_REG1,Hash Table Register 1"
line.long 0x08 "GMACGRP_HASH_TABLE_REG2,Hash Table Register 2"
line.long 0x0C "GMACGRP_HASH_TABLE_REG3,Hash Table Register 3"
line.long 0x10 "GMACGRP_HASH_TABLE_REG4,Hash Table Register 4"
line.long 0x14 "GMACGRP_HASH_TABLE_REG5,Hash Table Register 5"
line.long 0x18 "GMACGRP_HASH_TABLE_REG6,Hash Table Register 6"
line.long 0x1C "GMACGRP_HASH_TABLE_REG7,Hash Table Register 7"
group.long 0x584++0x07
line.long 0x00 "GMACGRP_VLAN_INCL_REG,VLAN Tag Inclusion Or Replacement Register"
bitfld.long 0x00 19. " CSVL               ,C-VLAN or S-VLAN" "C-VLAN,S-VLAN"
bitfld.long 0x00 18. "                     VLP                ,VLAN priority control" "0,1"
newline
bitfld.long 0x00 16.--17. " VLC                ,VLAN tag control in transmit frames" "No VLAN tag deletion/insertion/replacement,VLAN tag deletion,VLAN tag insertion,VLAN tag replacement"
hexmask.long.word 0x00 0.--15. 1. "                              VLT                ,VLAN tag for transmit frames"
line.long 0x04 "GMACGRP_VLAN_HASH_TABLE_REG,VLAN Hash Table Register"
hexmask.long.word 0x04 0.--15. 1. " VLHT               ,This field contains the 16-bit VLAN hash table"
group.long 0x700++0x07
line.long 0x00 "GMACGRP_TIMESTAMP_CONTROL,Timestamp Control Register"
bitfld.long 0x00 28. " ATSEN3             ,Auxiliary snapshot 3 enable" "Disabled,Enabled"
bitfld.long 0x00 27. "                   ATSEN2             ,Auxiliary snapshot 2 enable" "Disabled,Enabled"
bitfld.long 0x00 26. "                  ATSEN1             ,Auxiliary snapshot 1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. " ATSEN0             ,Auxiliary snapshot 0 enable" "Disabled,Enabled"
bitfld.long 0x00 24. "                   ATSFC              ,Auxiliary snapshot FIFO clear" "Disabled,Enabled"
bitfld.long 0x00 18. "                  TSENMACADDR        ,Enable MAC address for PTP frame filtering" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--17. " SNAPTYPSEL         ,Select PTP packets for taking snapshots" "0,1,2,3"
bitfld.long 0x00 15. "                          TSMSTRENA          ,Enable snapshot for messages relevant to master" "Slave,Master"
bitfld.long 0x00 14. "                    TSEVNTENA          ,Enable timestamp snapshot for event messages" "Disabled,Enabled"
newline
bitfld.long 0x00 13. " TSIPV4ENA          ,Enable processing of PTP frames sent over IPv4-UDP" "NO_PROCESS_PTP,PROCESS_PTP"
bitfld.long 0x00 12. "             TSIPV6ENA          ,Enable processing of PTP frames sent Over IPv6-UDP" "NO_PROCESS_PTP,PROCESS_PTP"
bitfld.long 0x00 11. "            TSIPENA            ,Enable processing of PTP over ETHERNET frames" "NO_PROCESS_PTP,PROCESS_PTP"
newline
bitfld.long 0x00 10. " TSVER2ENA          ,Enable PTP packet processing for version 2 format" "PTP_1588_VER1,PTP_1588_VER2"
bitfld.long 0x00 9. "              TSCTRLSSR          ,Timestamp digital or binary rollover control" "NOTIMESTAMP_LOW_ROLL_MAX,PTP_1588_VER2"
bitfld.long 0x00 8. "  TSENALL            ,Enable timestamp for all frames" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " TSADDREG           ,Addend reg update" "Not updated,Updated"
bitfld.long 0x00 4. "                TSTRIG             ,Timestamp interrupt trigger enable" "Disabled,Enabled"
bitfld.long 0x00 3. "                  TSUPDT             ,Timestamp update" "Not updated,Updated"
newline
bitfld.long 0x00 2. " TSINIT             ,Timestamp initialize" "Not initialized,Initialized"
bitfld.long 0x00 1. "            TSCFUPDT           ,Timestamp fine or coarse update" "Coarse,Fine"
bitfld.long 0x00 0. "                    TSENA              ,Timestamp enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_SUB_SECOND_INCREMENT,Sub-Second Increment Register"
hexmask.long.byte 0x04 0.--7. 1. " SSINC              ,The value programmed in this field is accumulated every clock cycle (of clk_ptp_i) with the contents of the sub-second register"
rgroup.long 0x708++0x07
line.long 0x00 "GMACGRP_SYSTEM_TIME_SECONDS,System Time - Seconds Register"
line.long 0x04 "GMACGRP_SYSTEM_TIME_NANOSECONDS,System Time - Nanoseconds Register"
hexmask.long 0x04 0.--30. 1. " TSSS               ,The value in this field has the sub second representation of time with an accuracy of 0.46 ns"
group.long 0x710++0x17
line.long 0x00 "GMACGRP_SYSTEM_TIME_SECONDS_UPDATE,System Time - Seconds Update Register"
line.long 0x04 "GMACGRP_SYSTEM_TIME_NANOSECONDS_UPDATE,System Time - Nanoseconds Update Register"
bitfld.long 0x04 31. " ADDSUB             ,When this bit is set the time value is subtracted with the contents of the update register" "Disabled,Enabled"
hexmask.long 0x04 0.--30. 1. "                   TSSS               ,The value in this field has the sub second representation of time with an accuracy of 0.46 ns"
line.long 0x08 "GMACGRP_TIMESTAMP_ADDEND,Timestamp Addend Register"
line.long 0x0C "GMACGRP_TARGET_TIME_SECONDS,Target Time Seconds Register"
line.long 0x10 "GMACGRP_TARGET_TIME_NANOSECONDS,Target Time Nanoseconds Register"
bitfld.long 0x10 31. " TRGTBUSY           ,The MAC sets this bit when the PPSCMD field in PPS control register is programmed to 010 or 011" "0,1"
hexmask.long 0x10 0.--30. 1. "                          TTSLO              ,This register stores the time in (signed) nanoseconds"
line.long 0x14 "GMACGRP_SYSTEM_TIME_HIGHER_WORD_SECONDS,System Time - Higher Word Seconds Register"
hexmask.long.word 0x14 0.--15. 1. " TSHWR              ,This field contains the most significant 16-bits of the timestamp seconds value"
hgroup.long 0x728++0x03
hide.long 0x00 "GMACGRP_TIMESTAMP_STATUS,Timestamp Status Register"
in
newline
group.long 0x72C++0x03
line.long 0x00 "GMACGRP_PPS_CONTROL,PPS Control Register"
bitfld.long 0x00 5.--6. " TRGTMODSEL0        ,This field indicates the Target Time registers mode for PPS0 output signal" "TRGTINTERONLY,,TRGTINTPPS0,TRGTNOINTER"
bitfld.long 0x00 4. "              PPSEN0             ,When set low bits[3:0] function as PPSCTRL (backward compatible). When set high bits[3:0] function as PPSCMD" "PPSCTRL,PPSCMD"
newline
bitfld.long 0x00 0.--3. " PPSCTRL_PPSCMD     ,PPS0 output frequency control [binary rollover/digital rollover]" ",2Hz/1Hz,4Hz/2Hz,8Hz/4Hz,16Hz/8Hz,32Hz/16Hz,64Hz/32Hz,128Hz/64Hz,256Hz/128Hz,512Hz/256Hz,1024Hz/512Hz,2048Hz/1024Hz,4096Hz/2048Hz,8192Hz/4096Hz,16384Hz/8192Hz,32768Hz/16384Hz"
rgroup.long 0x730++0x07
line.long 0x00 "GMACGRP_AUXILIARY_TIMESTAMP_NANOSECONDS,Auxiliary Timestamp Nanoseconds Register"
hexmask.long 0x00 0.--30. 1. " AUXTSLO            ,Contains the lower 32 bits (nano-seconds field) of the auxiliary timestamp"
line.long 0x04 "GMACGRP_AUXILIARY_TIMESTAMP_SECONDS,Auxiliary Timestamp - Seconds Register"
group.long 0x760++0x07
line.long 0x00 "GMACGRP_PPS0_INTERVAL,PPS0 Interval Register"
line.long 0x04 "GMACGRP_PPS0_WIDTH,PPS0 Width Register"
tree "MAC Address Registers"
group.long 0x800++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS16_HIGH,MAC Address16 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address16 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS16_LOW,MAC Address16 Low Register"
group.long 0x808++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS17_HIGH,MAC Address17 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address17 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS17_LOW,MAC Address17 Low Register"
group.long 0x810++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS18_HIGH,MAC Address18 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address18 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS18_LOW,MAC Address18 Low Register"
group.long 0x818++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS19_HIGH,MAC Address19 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address19 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS19_LOW,MAC Address19 Low Register"
group.long 0x820++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS20_HIGH,MAC Address20 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address20 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS20_LOW,MAC Address20 Low Register"
group.long 0x828++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS21_HIGH,MAC Address21 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address21 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS21_LOW,MAC Address21 Low Register"
group.long 0x830++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS22_HIGH,MAC Address22 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address22 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS22_LOW,MAC Address22 Low Register"
group.long 0x838++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS23_HIGH,MAC Address23 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address23 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS23_LOW,MAC Address23 Low Register"
group.long 0x840++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS24_HIGH,MAC Address24 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address24 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS24_LOW,MAC Address24 Low Register"
group.long 0x848++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS25_HIGH,MAC Address25 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address25 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS25_LOW,MAC Address25 Low Register"
group.long 0x850++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS26_HIGH,MAC Address26 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address26 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS26_LOW,MAC Address26 Low Register"
group.long 0x858++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS27_HIGH,MAC Address27 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address27 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS27_LOW,MAC Address27 Low Register"
group.long 0x860++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS28_HIGH,MAC Address28 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address28 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS28_LOW,MAC Address28 Low Register"
group.long 0x868++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS29_HIGH,MAC Address29 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address29 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS29_LOW,MAC Address29 Low Register"
group.long 0x870++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS30_HIGH,MAC Address30 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address30 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS30_LOW,MAC Address30 Low Register"
group.long 0x878++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS31_HIGH,MAC Address31 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address31 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS31_LOW,MAC Address31 Low Register"
group.long 0x880++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS32_HIGH,MAC Address32 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address32 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS32_LOW,MAC Address32 Low Register"
group.long 0x888++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS33_HIGH,MAC Address33 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address33 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS33_LOW,MAC Address33 Low Register"
group.long 0x890++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS34_HIGH,MAC Address34 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address34 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS34_LOW,MAC Address34 Low Register"
group.long 0x898++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS35_HIGH,MAC Address35 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address35 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS35_LOW,MAC Address35 Low Register"
group.long 0x8A0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS36_HIGH,MAC Address36 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address36 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS36_LOW,MAC Address36 Low Register"
group.long 0x8A8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS37_HIGH,MAC Address37 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address37 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS37_LOW,MAC Address37 Low Register"
group.long 0x8B0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS38_HIGH,MAC Address38 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address38 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS38_LOW,MAC Address38 Low Register"
group.long 0x8B8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS39_HIGH,MAC Address39 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address39 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS39_LOW,MAC Address39 Low Register"
group.long 0x8C0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS40_HIGH,MAC Address40 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address40 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS40_LOW,MAC Address40 Low Register"
group.long 0x8C8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS41_HIGH,MAC Address41 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address41 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS41_LOW,MAC Address41 Low Register"
group.long 0x8D0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS42_HIGH,MAC Address42 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address42 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS42_LOW,MAC Address42 Low Register"
group.long 0x8D8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS43_HIGH,MAC Address43 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address43 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS43_LOW,MAC Address43 Low Register"
group.long 0x8E0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS44_HIGH,MAC Address44 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address44 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS44_LOW,MAC Address44 Low Register"
group.long 0x8E8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS45_HIGH,MAC Address45 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address45 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS45_LOW,MAC Address45 Low Register"
group.long 0x8F0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS46_HIGH,MAC Address46 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address46 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS46_LOW,MAC Address46 Low Register"
group.long 0x8F8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS47_HIGH,MAC Address47 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address47 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS47_LOW,MAC Address47 Low Register"
group.long 0x900++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS48_HIGH,MAC Address48 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address48 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS48_LOW,MAC Address48 Low Register"
group.long 0x908++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS49_HIGH,MAC Address49 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address49 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS49_LOW,MAC Address49 Low Register"
group.long 0x910++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS50_HIGH,MAC Address50 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address50 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS50_LOW,MAC Address50 Low Register"
group.long 0x918++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS51_HIGH,MAC Address51 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address51 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS51_LOW,MAC Address51 Low Register"
group.long 0x920++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS52_HIGH,MAC Address52 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address52 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS52_LOW,MAC Address52 Low Register"
group.long 0x928++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS53_HIGH,MAC Address53 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address53 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS53_LOW,MAC Address53 Low Register"
group.long 0x930++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS54_HIGH,MAC Address54 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address54 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS54_LOW,MAC Address54 Low Register"
group.long 0x938++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS55_HIGH,MAC Address55 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address55 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS55_LOW,MAC Address55 Low Register"
group.long 0x940++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS56_HIGH,MAC Address56 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address56 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS56_LOW,MAC Address56 Low Register"
group.long 0x948++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS57_HIGH,MAC Address57 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address57 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS57_LOW,MAC Address57 Low Register"
group.long 0x950++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS58_HIGH,MAC Address58 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address58 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS58_LOW,MAC Address58 Low Register"
group.long 0x958++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS59_HIGH,MAC Address59 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address59 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS59_LOW,MAC Address59 Low Register"
group.long 0x960++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS60_HIGH,MAC Address60 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address60 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS60_LOW,MAC Address60 Low Register"
group.long 0x968++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS61_HIGH,MAC Address61 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address61 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS61_LOW,MAC Address61 Low Register"
group.long 0x970++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS62_HIGH,MAC Address62 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address62 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS62_LOW,MAC Address62 Low Register"
group.long 0x978++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS63_HIGH,MAC Address63 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address63 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS63_LOW,MAC Address63 Low Register"
group.long 0x980++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS64_HIGH,MAC Address64 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address64 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS64_LOW,MAC Address64 Low Register"
group.long 0x988++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS65_HIGH,MAC Address65 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address65 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS65_LOW,MAC Address65 Low Register"
group.long 0x990++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS66_HIGH,MAC Address66 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address66 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS66_LOW,MAC Address66 Low Register"
group.long 0x998++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS67_HIGH,MAC Address67 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address67 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS67_LOW,MAC Address67 Low Register"
group.long 0x9A0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS68_HIGH,MAC Address68 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address68 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS68_LOW,MAC Address68 Low Register"
group.long 0x9A8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS69_HIGH,MAC Address69 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address69 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS69_LOW,MAC Address69 Low Register"
group.long 0x9B0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS70_HIGH,MAC Address70 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address70 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS70_LOW,MAC Address70 Low Register"
group.long 0x9B8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS71_HIGH,MAC Address71 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address71 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS71_LOW,MAC Address71 Low Register"
group.long 0x9C0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS72_HIGH,MAC Address72 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address72 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS72_LOW,MAC Address72 Low Register"
group.long 0x9C8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS73_HIGH,MAC Address73 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address73 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS73_LOW,MAC Address73 Low Register"
group.long 0x9D0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS74_HIGH,MAC Address74 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address74 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS74_LOW,MAC Address74 Low Register"
group.long 0x9D8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS75_HIGH,MAC Address75 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address75 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS75_LOW,MAC Address75 Low Register"
group.long 0x9E0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS76_HIGH,MAC Address76 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address76 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS76_LOW,MAC Address76 Low Register"
group.long 0x9E8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS77_HIGH,MAC Address77 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address77 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS77_LOW,MAC Address77 Low Register"
group.long 0x9F0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS78_HIGH,MAC Address78 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address78 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS78_LOW,MAC Address78 Low Register"
group.long 0x9F8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS79_HIGH,MAC Address79 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address79 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS79_LOW,MAC Address79 Low Register"
group.long 0xA00++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS80_HIGH,MAC Address80 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address80 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS80_LOW,MAC Address80 Low Register"
group.long 0xA08++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS81_HIGH,MAC Address81 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address81 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS81_LOW,MAC Address81 Low Register"
group.long 0xA10++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS82_HIGH,MAC Address82 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address82 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS82_LOW,MAC Address82 Low Register"
group.long 0xA18++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS83_HIGH,MAC Address83 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address83 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS83_LOW,MAC Address83 Low Register"
group.long 0xA20++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS84_HIGH,MAC Address84 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address84 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS84_LOW,MAC Address84 Low Register"
group.long 0xA28++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS85_HIGH,MAC Address85 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address85 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS85_LOW,MAC Address85 Low Register"
group.long 0xA30++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS86_HIGH,MAC Address86 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address86 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS86_LOW,MAC Address86 Low Register"
group.long 0xA38++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS87_HIGH,MAC Address87 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address87 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS87_LOW,MAC Address87 Low Register"
group.long 0xA40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS88_HIGH,MAC Address88 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address88 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS88_LOW,MAC Address88 Low Register"
group.long 0xA48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS89_HIGH,MAC Address89 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address89 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS89_LOW,MAC Address89 Low Register"
group.long 0xA50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS90_HIGH,MAC Address90 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address90 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS90_LOW,MAC Address90 Low Register"
group.long 0xA58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS91_HIGH,MAC Address91 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address91 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS91_LOW,MAC Address91 Low Register"
group.long 0xA60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS92_HIGH,MAC Address92 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address92 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS92_LOW,MAC Address92 Low Register"
group.long 0xA68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS93_HIGH,MAC Address93 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address93 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS93_LOW,MAC Address93 Low Register"
group.long 0xA70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS94_HIGH,MAC Address94 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address94 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS94_LOW,MAC Address94 Low Register"
group.long 0xA78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS95_HIGH,MAC Address95 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address95 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS95_LOW,MAC Address95 Low Register"
group.long 0xA80++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS96_HIGH,MAC Address96 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address96 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS96_LOW,MAC Address96 Low Register"
group.long 0xA88++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS97_HIGH,MAC Address97 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address97 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS97_LOW,MAC Address97 Low Register"
group.long 0xA90++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS98_HIGH,MAC Address98 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address98 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS98_LOW,MAC Address98 Low Register"
group.long 0xA98++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS99_HIGH,MAC Address99 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address99 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS99_LOW,MAC Address99 Low Register"
group.long 0xAA0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS100_HIGH,MAC Address100 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address100 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS100_LOW,MAC Address100 Low Register"
group.long 0xAA8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS101_HIGH,MAC Address101 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address101 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS101_LOW,MAC Address101 Low Register"
group.long 0xAB0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS102_HIGH,MAC Address102 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address102 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS102_LOW,MAC Address102 Low Register"
group.long 0xAB8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS103_HIGH,MAC Address103 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address103 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS103_LOW,MAC Address103 Low Register"
group.long 0xAC0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS104_HIGH,MAC Address104 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address104 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS104_LOW,MAC Address104 Low Register"
group.long 0xAC8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS105_HIGH,MAC Address105 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address105 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS105_LOW,MAC Address105 Low Register"
group.long 0xAD0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS106_HIGH,MAC Address106 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address106 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS106_LOW,MAC Address106 Low Register"
group.long 0xAD8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS107_HIGH,MAC Address107 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address107 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS107_LOW,MAC Address107 Low Register"
group.long 0xAE0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS108_HIGH,MAC Address108 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address108 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS108_LOW,MAC Address108 Low Register"
group.long 0xAE8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS109_HIGH,MAC Address109 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address109 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS109_LOW,MAC Address109 Low Register"
group.long 0xAF0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS110_HIGH,MAC Address110 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address110 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS110_LOW,MAC Address110 Low Register"
group.long 0xAF8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS111_HIGH,MAC Address111 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address111 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS111_LOW,MAC Address111 Low Register"
group.long 0xB00++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS112_HIGH,MAC Address112 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address112 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS112_LOW,MAC Address112 Low Register"
group.long 0xB08++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS113_HIGH,MAC Address113 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address113 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS113_LOW,MAC Address113 Low Register"
group.long 0xB10++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS114_HIGH,MAC Address114 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address114 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS114_LOW,MAC Address114 Low Register"
group.long 0xB18++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS115_HIGH,MAC Address115 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address115 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS115_LOW,MAC Address115 Low Register"
group.long 0xB20++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS116_HIGH,MAC Address116 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address116 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS116_LOW,MAC Address116 Low Register"
group.long 0xB28++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS117_HIGH,MAC Address117 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address117 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS117_LOW,MAC Address117 Low Register"
group.long 0xB30++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS118_HIGH,MAC Address118 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address118 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS118_LOW,MAC Address118 Low Register"
group.long 0xB38++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS119_HIGH,MAC Address119 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address119 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS119_LOW,MAC Address119 Low Register"
group.long 0xB40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS120_HIGH,MAC Address120 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address120 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS120_LOW,MAC Address120 Low Register"
group.long 0xB48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS121_HIGH,MAC Address121 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address121 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS121_LOW,MAC Address121 Low Register"
group.long 0xB50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS122_HIGH,MAC Address122 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address122 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS122_LOW,MAC Address122 Low Register"
group.long 0xB58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS123_HIGH,MAC Address123 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address123 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS123_LOW,MAC Address123 Low Register"
group.long 0xB60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS124_HIGH,MAC Address124 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address124 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS124_LOW,MAC Address124 Low Register"
group.long 0xB68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS125_HIGH,MAC Address125 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address125 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS125_LOW,MAC Address125 Low Register"
group.long 0xB70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS126_HIGH,MAC Address126 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address126 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS126_LOW,MAC Address126 Low Register"
group.long 0xB78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS127_HIGH,MAC Address127 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address127 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS127_LOW,MAC Address127 Low Register"
tree.end
newline
group.long 0x1000++0x1F
line.long 0x00 "DMAGRP_BUS_MODE,Bus Mode Register"
bitfld.long 0x00 31. " RIB                ,Rebuild INCRx burst" "0,1"
bitfld.long 0x00 28.--29. "                          PRWG               ,Channel priority weights" "1,2,3,4"
bitfld.long 0x00 27. "                         TXPR               ,Transmit priority" "0,1"
newline
bitfld.long 0x00 26. " MB                 ,Mixed burst" "0,1"
bitfld.long 0x00 25. "                          AAL                ,Address aligned beats" "Disabled,Enabled"
bitfld.long 0x00 24. "                  EIGHTXPBL          ,PBLx8 mode" "Disabled,Enabled"
newline
bitfld.long 0x00 23. " USP                ,Use separate PBL" "Disabled,Enabled"
bitfld.long 0x00 17.--22. "                   RPBL               ,This field indicates the maximum number of beats to be transferred in one RX DMA transaction" ",RXDMAPBL1,RXDMAPBL2,,RXDMAPBL4,,,,RXDMAPBL8,,,,,,,,RXDMAPBL16,,,,,,,,,,,,,,,,RXDMAPBL20,?..."
bitfld.long 0x00 16. "                FB                 ,Fixed burst" "Non FB,FB1_4_8_16"
newline
bitfld.long 0x00 14.--15. " PR                 ,Priority ratio" "1:1,2:1,3:1,4:1"
bitfld.long 0x00 8.--13. "                        PBL                ,Programmable burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 7. "                        ATDS               ,Alternate descriptor size" "Clear RST,Reset"
newline
bitfld.long 0x00 2.--6. " DSL                ,Descriptor skip length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1. "                         DA                 ,DMA arbitration scheme" "Weighted round-robin,Fixed priority"
bitfld.long 0x00 0. "      SWR                ,Software reset" "Clear RST,Reset"
line.long 0x04 "DMAGRP_TRANSMIT_POLL_DEMAND,Transmit Poll Demand Register"
line.long 0x08 "DMAGRP_RECEIVE_POLL_DEMAND,Receive Poll Demand Register"
line.long 0x0C "DMAGRP_RECEIVE_DESCRIPTOR_LIST_ADDRESS,Receive Descriptor List Address Register"
hexmask.long 0x0C 2.--31. 0x04 " RDESLA_32BIT       ,This field contains the base address of the first descriptor in the Receive Descriptor list"
line.long 0x10 "DMAGRP_TRANSMIT_DESCRIPTOR_LIST_ADDRESS,Transmit Descriptor List Address Register"
hexmask.long 0x10 2.--31. 0x04 " TDESLA_32BIT       ,This field contains the base address of the first descriptor in the Transmit Descriptor list"
line.long 0x14 "DMAGRP_STATUS,Status Register"
rbitfld.long 0x14 30. " GLPII              ,GMAC LPI interrupt for channel 0" "No interrupt,Interrupt"
rbitfld.long 0x14 29. "               TTI                ,Timestamp trigger interrupt" "No interrupt,Interrupt"
rbitfld.long 0x14 28. "              GPI                ,GMAC PMT interrupt" "No interrupt,Interrupt"
newline
rbitfld.long 0x14 27. " GMI                ,GMAC MMC interrupt" "No interrupt,Interrupt"
rbitfld.long 0x14 26. "               GLI                ,GMAC line interface interrupt" "No interrupt,Interrupt"
newline
rbitfld.long 0x14 23.--25. " EB                 ,Error bits" "RX DMA write data transfer,,,TX DMA read data transfer,RX DMA descriptor write access,TX DMA descriptor write access,RX DMA descriptor read access,TX DMA descriptor read access"
newline
rbitfld.long 0x14 20.--22. " TS                 ,Transmit process state" "STOPPED,RUNFETCH,RUNWAIT,RUNREAD,TIMESTMP,,SUSPTX,RUNCLOS"
rbitfld.long 0x14 17.--19. "                   RS                 ,Received process state" "STOPPED,RUNFETCH,,RUNWAIT,SUSPEND,RUNCLOSE,TIMESTMP,RUNTRANS"
eventfld.long 0x14 16. "                  NIS                ,Normal interrupt summary" "0,1"
newline
eventfld.long 0x14 15. " AIS                ,Abnormal interrupt summary" "0,1"
bitfld.long 0x14 14. "                          ERI                ,Early receive interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 13. "              FBI                ,Fatal bus error interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x14 10. " ETI                ,Early transmit interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 9. "               RWT                ,Receive watchdog timeout" "Not received,Received"
bitfld.long 0x14 8. "              RPS                ,Receive process stopped" "Not stopped,Stopped"
newline
bitfld.long 0x14 7. " RU                 ,Receive buffer unavailable" "No,Yes"
bitfld.long 0x14 6. "                        RI                 ,Receive interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 5. "              UNF                ,Transmit underflow" "No underflow,Underflow"
newline
bitfld.long 0x14 4. " OVF                ,Receive overflow" "Not overflow,Overflow"
bitfld.long 0x14 3. "               TJT                ,Transmit jabber timeout" "Not transmitted,Transmitted"
bitfld.long 0x14 2. "           TU                 ,Transmit buffer unavailable" "No,Yes"
newline
bitfld.long 0x14 1. " TPS                ,Transmit process stopped" "Not stopped,Stopped"
bitfld.long 0x14 0. "                TI                 ,Transmit interrupt" "No interrupt,Interrupt"
line.long 0x18 "DMAGRP_OPERATION_MODE,Operation Mode Register"
bitfld.long 0x18 26. " DT                 ,Disable dropping of TCP/IP checksum error frames" "Disabled,Enabled"
bitfld.long 0x18 25. "                   RSF                ,Receive store and forward" "Disabled,Enabled"
bitfld.long 0x18 24. "                  DFF                ,Disable flushing of received frames" "Disabled,Enabled"
newline
bitfld.long 0x18 23. " RFA_2              ,MSB of threshold for activating flow control" "Disabled,Enabled"
bitfld.long 0x18 22. "                   RFD_2              ,MSB of threshold for activating flow control" "Disabled,Enabled"
bitfld.long 0x18 21. "                  TSF                ,Transmit store and forward" "Disabled,Enabled"
newline
bitfld.long 0x18 14.--16. " TTC                ,Transmit threshold control" "TTCTHESH64,TTCTHRES128,TTCTHRES192,TTCTHRES256,TTCTHRES40,TTCTHRES32,TTCTHRES24,TTCTHRES16"
bitfld.long 0x18 13. "                ST                 ,Start or stop transmission command" "Disabled,Enabled"
bitfld.long 0x18 11.--12. "                  RFD                ,Threshold for deactivating flow control" "FIFOFULL_1K,FIFOFULL_2K,FIFOFULL_3K,FIFOFULL_4K"
newline
bitfld.long 0x18 9.--10. " RFA                ,Threshold for activating flow control" "FIFOFULL_1K,FIFOFULL_2K,FIFOFULL_3K,FIFOFULL_4K"
bitfld.long 0x18 7. "                FEF                ,Forward error frames" "Disabled,Enabled"
bitfld.long 0x18 6. "                  FUF                ,Forward undersized good frames" "Disabled,Enabled"
newline
bitfld.long 0x18 5. " DGF                ,Drop giant frames" "0,1"
bitfld.long 0x18 3.--4. "                          RTC                ,Receive threshold control" "THRFIFO64,THRFIFO32,THRFIFO96,THRFIFO128"
bitfld.long 0x18 2. "                OSF                ,Operate on second frame" "Disabled,Enabled"
newline
bitfld.long 0x18 1. " SR                 ,Start or stop receive" "Disabled,Enabled"
line.long 0x1C "DMAGRP_INTERRUPT_ENABLE,Interrupt Enable Register"
bitfld.long 0x1C 16. " NIE                ,Normal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x1C 15. "                   AIE                ,Abnormal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x1C 14. "                  ERE                ,Early receive interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 13. " FBE                ,Fatal bus error enable" "Disabled,Enabled"
bitfld.long 0x1C 10. "                   ETE                ,Early transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 9. "                  RWE                ,Receive watchdog timeout enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 8. " RSE                ,Receive stopped enable" "Disabled,Enabled"
bitfld.long 0x1C 7. "                   RUE                ,Receive buffer unavailable enable" "Disabled,Enabled"
bitfld.long 0x1C 6. "                  RIE                ,Receive interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 5. " UNE                ,Underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 4. "                   OVE                ,Overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 3. "                  TJE                ,Transmit jabber timeout enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 2. " TUE                ,Transmit buffer unavailable enable" "Disabled,Enabled"
bitfld.long 0x1C 1. "                   TSE                ,Transmit stopped enable" "Disabled,Enabled"
bitfld.long 0x1C 0. "                  TIE                ,Transmit interrupt enable" "Disabled,Enabled"
newline
width 48.
rgroup.long 0x1020++0x03
line.long 0x00 "DMAGRP_MISSED_FRAME_AND_BUFFER_OVERFLOW_COUNTER,Missed Frame And Buffer Overflow Counter Register"
bitfld.long 0x00 28. " OVFCNTOVF          ,Overflow bit for FIFO overflow counter" "0,1"
hexmask.long.word 0x00 17.--27. 1. "                          OVFFRMCNT          ,Overflow frame counter"
bitfld.long 0x00 16. "                      MISCNTOVF      ,Overflow bit for missed frame counter" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. " MISFRMCNT          ,Missed frame counter"
group.long 0x1024++0x07
line.long 0x00 "DMAGRP_RECEIVE_INTERRUPT_WATCHDOG_TIMER,Receive Interrupt Watchdog Timer Register"
hexmask.long.byte 0x00 0.--7. 1. " RIWT               ,RI watchdog timer count"
line.long 0x04 "DMAGRP_AXI_BUS_MODE,AXI Bus Mode Register"
bitfld.long 0x04 31. " EN_LPI             ,LPI mode enable" "Disabled,Enabled"
newline
bitfld.long 0x04 30. " LPI_XIT_FRM        ,GMAC-AXI come out of the LPI mode circumstances" "Any frame is received,Magic Packet or Remote Wake Up Packet is received"
newline
bitfld.long 0x04 20.--23. " WR_OSR_LMT         ,AXI maximum write outstanding request limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x04 16.--19. " RD_OSR_LMT         ,AXI maximum write outstanding request limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 13. "                         ONEKBBE            ,1KB boundary crossing enable for the GMAC-AXI master" "FOUR_K_BOUNDARY,ONE_K_BOUNDARY"
rbitfld.long 0x04 12. "           AXI_AAL        ,Reflects the Bit 25(AAL) Bus Mode Register" "0,1"
newline
bitfld.long 0x04 3. " BLEN16             ,GMAC-AXI is allowed to select a burst length of 16 on the AXI Master interface" "Disabled,Enabled"
bitfld.long 0x04 2. "                   BLEN8              ,GMAC-AXI is allowed to select a burst length of 8 on the AXI Master interface" "Disabled,Enabled"
bitfld.long 0x04 1. "                  BLEN4          ,GMAC-AXI is allowed to select a burst length of 4 on the AXI Master interface" "Disabled,Enabled"
newline
rbitfld.long 0x04 0. " UNDEFINED          ,Indicates the complement (invert) value of Bit 16 (FB) in Register 0 (Bus Mode Register[16])" "Disabled,Enabled"
rgroup.long 0x102C++0x03
line.long 0x00 "DMAGRP_AHB_OR_AXI_STATUS,AHB Or AXI Status Register"
bitfld.long 0x00 1. " AXIRDSTS           ,AXI master read channel status" "Low,High"
bitfld.long 0x00 0. "                       AXWHSTS            ,AXI master write channel or AHB master status" "Low,High"
rgroup.long 0x1048++0x13
line.long 0x00 "DMAGRP_CURRENT_HOST_TRANSMIT_DESCRIPTOR,Current Host Transmit Descriptor Register"
line.long 0x04 "DMAGRP_CURRENT_HOST_RECEIVE_DESCRIPTOR,Current Host Receive Descriptor Register"
line.long 0x08 "DMAGRP_CURRENT_HOST_TRANSMIT_BUFFER_ADDRESS,Current Host Transmit Buffer Address Register"
line.long 0x0C "DMAGRP_CURRENT_HOST_RECEIVE_BUFFER_ADDRESS,Current Host Receive Buffer Address Register"
line.long 0x10 "DMAGRP_HW_FEATURE,HW Feature Register"
bitfld.long 0x10 28.--30. " ACTPHYIF           ,Active or Selected PHY interface" "GMIIMII0,RGMII1,SGMII2,TBI3,RMII4,RTBI5,SMII6,REVMII7"
bitfld.long 0x10 27. "                   SAVLANINS          ,Source address or VLAN insertion" "0,1"
bitfld.long 0x10 26. "                         FLEXIPPSEN     ,Flexible pulse-per-second output" "0,1"
newline
bitfld.long 0x10 25. " INTTSEN            ,Timestamping with internal system time" "0,1"
bitfld.long 0x10 24. "                          ENHDESSEL          ,Alternate (enhanced descriptor)" "Disabled,Enabled"
bitfld.long 0x10 22.--23. "                  TXCHCNT        ,Number of additional TX channel" "0,1,2,3"
newline
bitfld.long 0x10 20.--21. " RXCHCNT            ,Number of additional RX channel" "0,1,2,3"
bitfld.long 0x10 19. "                          RXFIFOSIZE         ,RX FIFO > 2048 Bytes" "Disabled,Enabled"
bitfld.long 0x10 18. "                  RXTYP2COE      ,IP checksum offload (type 2) in RX" "Disabled,Enabled"
newline
bitfld.long 0x10 17. " RXTYP1COE          ,IP checksum offload (type 1) in RX" "Disabled,Enabled"
bitfld.long 0x10 16. "                   TXOESEL            ,Checksum offload in TX" "Disabled,Enabled"
bitfld.long 0x10 15. "                  AVSEL          ,AV feature" "Disabled,Enabled"
newline
bitfld.long 0x10 14. " EEESEL             ,Energy efficient ETHERNET" "Disabled,Enabled"
bitfld.long 0x10 13. "                   TSVER2SEL          ,IEEE 1588-2008 advanced timestamp" "Disabled,Enabled"
bitfld.long 0x10 12. "                  TSVER1SEL      ,Only IEEE 1588-2002 timestamp" "Disabled,Enabled"
newline
bitfld.long 0x10 11. " MMCSEL             ,RMON module" "Disabled,Enabled"
bitfld.long 0x10 10. "                   MGKSEL             ,PMT magic packet" "Disabled,Enabled"
bitfld.long 0x10 9. "                  RWKSEL         ,PMT remote wakeup" "Disabled,Enabled"
newline
bitfld.long 0x10 8. " SMASEL             ,SMA (MDIO) interface" "Disabled,Enabled"
bitfld.long 0x10 7. "                   L3L4FLTREN         ,Layer 3 and layer 4 filter feature" "0,1"
bitfld.long 0x10 6. "                         PCSSEL         ,PCS registers (TBI/SGMII/RTBI PHY interface)" "Disabled,Enabled"
newline
bitfld.long 0x10 5. " ADDMACADRSEL       ,Multiple MAC address registers" "Disabled,Enabled"
bitfld.long 0x10 4. "                   HASHSEL            ,HASH filter" "Disabled,Enabled"
bitfld.long 0x10 3. "                  EXTHASHEN      ,Expanded DA hash filter" "0,1"
newline
bitfld.long 0x10 2. " HDSEL              ,Half-Duplex support" "Disabled,Enabled"
bitfld.long 0x10 1. "                   GMIISEL            ,1000 Mbps support" "Disabled,Enabled"
bitfld.long 0x10 0. "                  MIISEL         ,10 or 100 Mbps support" "Disabled,Enabled"
group.long 0xDC++0x07
line.long 0x00 "GMACGRP_WDOG_TIMEOUT,Watchdog Timeout Register"
bitfld.long 0x00 16. " PWE                ,Programmable watchdog enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--13. 1. "                   WTO                ,Watchdog timeout"
line.long 0x04 "GMACGRP_GENPIO,General Purpose IO Register"
bitfld.long 0x04 24. " GPIT               ,GPI type" "Latched-low,Latched-high"
bitfld.long 0x04 16. "               GPIE               ,GPI interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 8. " GPO                ,General purpose output" "Drives not directly to GPO_O output ports,Drives directly to GPO_O output ports"
rbitfld.long 0x04 0. "                               GPIS           ,General purpose input status" "0,1"
width 0x0B
tree.end
tree "EMAC1"
base ad:0xFF802000
width 28.
group.long 0x00++0x07
line.long 0x00 "GMACGRP_MAC_CONFIGURATION,MAC Configuration Register"
bitfld.long 0x00 30. " SARC[2]            ,Source address selection" "0,1"
bitfld.long 0x00 28.--29. "                          SARC[1:0]          ,Source address operation type selection" "0,1,2,3"
bitfld.long 0x00 27. "                         TWOKPE             ,IEEE 802.3as support for 2k packets" "Not supported,Supported"
newline
bitfld.long 0x00 26. " SFTERR             ,SMII force transmit error" "Not forced,Forced"
bitfld.long 0x00 25. "                 CST                ,CRC stripping for type frames" "Disabled,Enabled"
bitfld.long 0x00 24. "                  TC                 ,Transmit configuration in RGMI/SGMII/SMII" "Disabled,Enabled"
newline
bitfld.long 0x00 23. " WD                 ,Watchdog disable" "No,Yes"
bitfld.long 0x00 22. "                        JD                 ,Jabber disable" "No,Yes"
bitfld.long 0x00 21. "                       BE                 ,Frame burst enable" "Disabled,Enabled"
newline
bitfld.long 0x00 20. " JE                 ,Jumbo frame enable" "Disabled,Enabled"
bitfld.long 0x00 17.--19. "                   IFG                ,Inter-frame gap" "IFG96BITTIMES,IFG88BITTIMES,IFG80BITTIMES,IFG72BITTIMES,IFG64BITTIMES,IFG56BITTIMES,IFG48BITTIMES,IFG40BITTIMES"
bitfld.long 0x00 16. "             DCRS               ,Disable carrier sense during transmission" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " PS                 ,Port select" "GMII1000SEL,MII10100SEL"
bitfld.long 0x00 14. "                FES                ,Speed select" "SPEED10,SPEED100"
bitfld.long 0x00 13. "                  DO                 ,Disable receive own" "No,Yes"
newline
bitfld.long 0x00 12. " LM                 ,Loopback mode" "Disabled,Enabled"
bitfld.long 0x00 11. "                   DM                 ,Duplex mode" "Disabled,Enabled"
bitfld.long 0x00 10. "                  IPC                ,Checksum offload" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " DR                 ,Disable retry" "No,Yes"
bitfld.long 0x00 8. "                        LUD                ,Link up or down" "Down,Up"
bitfld.long 0x00 7. "                      ACS                ,Automatic pad or CRC stripping" "Disabled,Enabled"
newline
bitfld.long 0x00 5.--6. " L                  ,Back-off limit" "BACKLIMTR10,BACKLIMTR8,BACKLIMTR4,BACKLIMTR1"
bitfld.long 0x00 4. "                BDC                ,Deferral check" "Disabled,Enabled"
bitfld.long 0x00 3. "                  TE                 ,Transmitter enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " RE                 ,Receiver enable" "Disabled,Enabled"
bitfld.long 0x00 0.--1. "                   PRELEN             ,Preamble length for transmit frames" "PREAM7BYTES,PREAM5BYTES,PREAM3BYTES,PREAM1BYTES"
line.long 0x04 "GMACGRP_MAC_FRAME_FILTER,MAC Frame Filter"
bitfld.long 0x04 31. " RA                 ,Receive all" "Disabled,Enabled"
bitfld.long 0x04 21. "                   DNTU               ,Drop non-TCP/UDP over IP frames" "Disabled,Enabled"
bitfld.long 0x04 20. "                  IPFE               ,Layer 3 and layer 4 filter enable" "Not dropped,Dropped"
newline
bitfld.long 0x04 16. " VTFE               ,VLAN tag filter enable" "Not dropped,Dropped"
bitfld.long 0x04 10. "                HPF                ,Hash or perfect filter" "Disabled,Enabled"
bitfld.long 0x04 9. "                  SAF                ,Source address filter enable" "Disabled,Enabled"
newline
bitfld.long 0x04 8. " SAIF               ,SA inverse filtering" "Disabled,Enabled"
bitfld.long 0x04 6.--7. "                   PCF                ,Pass control frames" "MACFLTALLCFR,MACFWDXPAUSE,MACFWDFAIL,MACFWDPASS"
bitfld.long 0x04 5. "              DBF                ,Disable broadcast frames" "Disabled,Enabled"
newline
bitfld.long 0x04 4. " PM                 ,Pass all multicast" "Disabled,Enabled"
bitfld.long 0x04 3. "                   DAIF               ,DA inverse filtering" "Disabled,Enabled"
bitfld.long 0x04 2. "                  HMC                ,Hash multicast" "Disabled,Enabled"
newline
bitfld.long 0x04 1. " HUC                ,Hash unicast" "Disabled,Enabled"
bitfld.long 0x04 0. "                   PR                 ,Promiscuous mode" "Disabled,Enabled"
group.long 0x10++0x0F
line.long 0x00 "GMACGRP_GMII_ADDRESS,GMII Address Register"
bitfld.long 0x00 11.--15. " PA                 ,Physical layer address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--10. "                         GR                 ,GMII register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 2.--5. "                        CR                 ,CSR clock range" "DIV42,DIV62,DIV16,DIV26,DIV102,DIV124,,,DIV4,DIV6,DIV8,DIV10,DIV12,DIV14,DIV16,DIV18"
newline
bitfld.long 0x00 1. " GW                 ,GMII write" "Disabled,Enabled"
bitfld.long 0x00 0. "                   GB                 ,GMII busy" "Disabled,Enabled"
line.long 0x04 "GMACGRP_GMII_DATA,GMII Data Register"
hexmask.long.word 0x04 0.--15. 1. " GD                 ,GMII data"
line.long 0x08 "GMACGRP_FLOW_CONTROL,Flow Control Register"
hexmask.long.word 0x08 16.--31. 1. " PT                 ,Pause time"
bitfld.long 0x08 7. "                       DZPQ               ,Disable zero-quanta pause" "Disabled,Enabled"
bitfld.long 0x08 4.--5. "                  PLT                ,Pause low threshold" "PAUSETIME_4,PAUSETIME_28,PAUSETIME_144,PAUSETIME_256"
newline
bitfld.long 0x08 3. " UP                 ,Unicast pause frame detect" "Disabled,Enabled"
bitfld.long 0x08 2. "                   RFE                ,Receive flow control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "                  TFE                ,Transmit flow control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. " FCA_BPA            ,Flow control busy or backpressure activate" "Disabled,Enabled"
line.long 0x0C "GMACGRP_VLAN_TAG,VLAN Tag Register"
bitfld.long 0x0C 19. " VTHM               ,VLAN tag hash table match enable" "Disabled,Enabled"
bitfld.long 0x0C 18. "                   ESVL               ,Enable S-VLAN" "Disabled,Enabled"
bitfld.long 0x0C 17. "                  VTIM               ,VLAN tag inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 16. " ETV                ,Enable 12-bit VLAN tag comparison" "Disabled,Enabled"
hexmask.long.word 0x0C 0.--15. 1. "                   VL                 ,VLAN tag identifier for receive frames"
rgroup.long 0x20++0x07
line.long 0x00 "GMACGRP_VERSION,Version Register"
hexmask.long.byte 0x00 8.--15. 1. " USERVER            ,User-defined version"
hexmask.long.byte 0x00 0.--7. 1. "                         SNPSVER            ,Synopsys-defined version"
line.long 0x04 "GMACGRP_DEBUG,Debug Register"
bitfld.long 0x04 25. " TXSTSFSTS          ,MTL TX status FIFO full status" "Inactive,Active"
bitfld.long 0x04 24. "                   TXFSTS             ,MTL TX FIFO not empty status" "Inactive,Active"
bitfld.long 0x04 22. "                  TWCSTS             ,MTL TX FIFO write controller active status" "Inactive,Active"
newline
bitfld.long 0x04 20.--21. " TRCSTS             ,MTL TX FIFO read controller status" "IDLE,READSTATE,WAITTXSTAT,WRTXSTAT"
bitfld.long 0x04 19. "                 TXPAUSED           ,MAC transmitter in pause" "Disabled,Enabled"
bitfld.long 0x04 17.--18. "                  TFCSTS             ,MAC transmit frame controller status" "IDLE,WAITIFG,XTPAUSE,XTINFRM"
newline
bitfld.long 0x04 16. " TPESTS             ,MAC GMII or MII transmit protocol engine status" "Disabled,Enabled"
bitfld.long 0x04 8.--9. "                   RXFSTS             ,MTL RX FIFO fill-level status" "RXFIFOEMPTY,RXFIFOBELLVL,RXFIFOABLVL,RXFIFOFULL"
bitfld.long 0x04 5.--6. "              RRCSTS             ,MTL RX FIFO read controller state" "IDLE,RDFRAMEDATA,RDFRAMESTAT,FLUSHFRDS"
newline
bitfld.long 0x04 4. " RWCSTS             ,MTL RX FIFO write controller active status" "Inactive,Active"
bitfld.long 0x04 2. "                   RFCFCSTS[1]        ,MAC receive frame controller FIFO status" "Inactive,Active"
bitfld.long 0x04 1. "                  RFCFCSTS[0]        ,MAC receive frame controller FIFO status" "Inactive,Active"
newline
bitfld.long 0x04 0. " RPESTS             ,MAC GMII or MII receive protocol engine status" "Inactive,Active"
group.long 0x30++0x07
line.long 0x00 "GMACGRP_LPI_CONTROL_STATUS,LPI Control And Status Register"
bitfld.long 0x00 19. " LPITXA             ,LPI TX automate" "Disabled,Enabled"
bitfld.long 0x00 18. "                   PLSEN              ,PHY link status enable" "Disabled,Enabled"
bitfld.long 0x00 17. "                  PLS                ,PHY link status" "Disabled,Enabled"
newline
bitfld.long 0x00 16. " LPIEN              ,LPI enable" "Disabled,Enabled"
bitfld.long 0x00 9. "                   RLPIST             ,Receive LPI state" "Inactive,Active"
bitfld.long 0x00 8. "                  TLPIST             ,Transmit LPI state" "Inactive,Active"
newline
bitfld.long 0x00 3. " RLPIEX             ,Receive LPI exit" "Inactive,Active"
bitfld.long 0x00 2. "                   RLPIEN             ,Receive LPI entry" "Inactive,Active"
bitfld.long 0x00 1. "                  TLPIEX             ,Transmit LPI exit" "Inactive,Active"
newline
bitfld.long 0x00 0. " TLPIEN             ,Transmit LPI entry" "Inactive,Active"
line.long 0x04 "GMACGRP_LPI_TIMERS_CONTROL,LPI Timers Control Register"
hexmask.long.word 0x04 16.--25. 1. " LST                ,LPI LS timer"
hexmask.long.word 0x04 0.--15. 1. "                       LWT                ,LPI TW timer"
rgroup.long 0x38++0x03
line.long 0x00 "GMACGRP_INTERRUPT_STATUS,Interrupt Register"
bitfld.long 0x00 11. " GPIIS              ,GPI interrupt status" "Inactive,Active"
bitfld.long 0x00 10. "                   LPIIS              ,LPI interrupt status" "Inactive,Active"
bitfld.long 0x00 9. "                  TSIS               ,Timestamp interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 7. " MMCRXIPIS          ,MMC receive checksum offload interrupt status" "Inactive,Active"
bitfld.long 0x00 6. "                   MMCTXIS            ,MMC transmit interrupt status" "Inactive,Active"
bitfld.long 0x00 5. "                  MMCRXIS            ,MMC receive interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x00 4. " MMCIS              ,MMC interrupt status" "Inactive,Active"
bitfld.long 0x00 3. "                   PMTIS              ,PMT interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 2. "              PCSANCIS           ,PCS auto-negotiation complete" "Not completed,Completed"
newline
bitfld.long 0x00 1. " PCSLCHGIS          ,PCS link status changed" "Not changed,Changed"
bitfld.long 0x00 0. "                RGSMIIIS           ,RGMII or SMII interrupt status" "Inactive,Active"
group.long 0x3C++0x03
line.long 0x00 "GMACGRP_INTERRUPT_MASK,Interrupt Mask Register"
bitfld.long 0x00 10. " LPIIM              ,LPI interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 9. "                   TSIM               ,Timestamp interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 3. "                  PMTIM              ,PMT interrupt mask" "Unmasked,Masked"
newline
bitfld.long 0x00 2. " PCSANCIM           ,PCS an completion interrupt mask" "Unmasked,Masked"
bitfld.long 0x00 1. "                   PCSLCHGIM          ,PCS link status interrupt mask" "Unmasked,Masked"
bitfld.long 0x00 0. "                  RGSMIIIM           ,RGMII or SMII interrupt mask" "Inactive,Active"
tree "GMACGRP_MAC_ADDRESS Registers"
group.long 0x40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS0_HIGH,MAC Address0 High Register"
rbitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address0 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS0_LOW,MAC Address0 Low Register"
group.long 0x48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS1_HIGH,MAC Address1 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address1 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS1_LOW,MAC Address1 Low Register"
group.long 0x50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS2_HIGH,MAC Address2 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address2 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS2_LOW,MAC Address2 Low Register"
group.long 0x58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS3_HIGH,MAC Address3 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address3 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS3_LOW,MAC Address3 Low Register"
group.long 0x60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS4_HIGH,MAC Address4 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address4 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS4_LOW,MAC Address4 Low Register"
group.long 0x68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS5_HIGH,MAC Address5 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address5 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS5_LOW,MAC Address5 Low Register"
group.long 0x70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS6_HIGH,MAC Address6 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address6 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS6_LOW,MAC Address6 Low Register"
group.long 0x78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS7_HIGH,MAC Address7 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address7 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS7_LOW,MAC Address7 Low Register"
group.long 0x80++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS8_HIGH,MAC Address8 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address8 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS8_LOW,MAC Address8 Low Register"
group.long 0x88++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS9_HIGH,MAC Address9 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address9 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS9_LOW,MAC Address9 Low Register"
group.long 0x90++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS10_HIGH,MAC Address10 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address10 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS10_LOW,MAC Address10 Low Register"
group.long 0x98++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS11_HIGH,MAC Address11 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address11 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS11_LOW,MAC Address11 Low Register"
group.long 0xA0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS12_HIGH,MAC Address12 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address12 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS12_LOW,MAC Address12 Low Register"
group.long 0xA8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS13_HIGH,MAC Address13 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address13 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS13_LOW,MAC Address13 Low Register"
group.long 0xB0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS14_HIGH,MAC Address14 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address14 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS14_LOW,MAC Address14 Low Register"
group.long 0xB8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS15_HIGH,MAC Address15 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address15 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS15_LOW,MAC Address15 Low Register"
tree.end
newline
width 42.
rgroup.long 0xD8++0x03
line.long 0x00 "GMACGRP_SGMII_RGMII_SMII_CONTROL_STATUS,SGMII/RGMII/SMII Status Register"
bitfld.long 0x00 3. " LNKSTS             ,This bit indicates whether the link is up or down" "LINKDOWN,LINKUP"
bitfld.long 0x00 1.--2. "                   LNKSPEED           ,This bit indicates the current speed of the link" "SPEED2POINT5MHZ,SPEED25MHZ,SPEED125MHZ,?..."
bitfld.long 0x00 0. "           LNKMOD             ,This bit indicates the current mode of operation of the link" "HALFDUP,FULLDUP"
group.long 0x100++0x03
line.long 0x00 "GMACGRP_MMC_CONTROL,MMC Control Register"
bitfld.long 0x00 8. " UCDBC              ,Update MMC counters for dropped broadcast frames" "Not updated,Updated"
bitfld.long 0x00 5. "                CNTPRSTLVL         ,Full-half preset" "ALMOSTHALF,ALMOSTFULL"
bitfld.long 0x00 4. "                CNTPRST            ,Counters preset" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " CNTFREEZ           ,MMC counter freeze" "Disabled,Enabled"
bitfld.long 0x00 2. "                   RSTONRD            ,Reset on read" "Disabled,Enabled"
bitfld.long 0x00 1. "                  CNTSTOPRO          ,Counters stop rollover" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " CNTRST             ,Counters reset" "Disabled,Enabled"
rgroup.long 0x104++0x07
line.long 0x00 "GMACGRP_MMC_RECEIVE_INTERRUPT,MMC Receive Interrupt Register"
bitfld.long 0x00 25. " RXCTRLFIS          ,MMC receive control frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 24. "                   RXRCVERRFIS        ,MMC receive error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 23. "                  RXWDOGFIS          ,MMC receive watchdog error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 22. " RXVLANGBFIS        ,MMC receive VLAN good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 21. "                   RXFOVFIS           ,MMC receive FIFO overflow frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 20. "                  RXPAUSFIS          ,MMC receive pause frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 19. " RXORANGEFIS        ,MMC receive out of range error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 18. "                   RXLENERFIS         ,MMC receive length error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 17. "                  RXUCGFIS           ,MMC receive unicast good frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 16. " RX1024TMAXOCTGBFIS ,MMC receive 1024 to maximum octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 15. "                   RX512T1023OCTGBFIS ,MMC receive 512 to 1023 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 14. "                  RX256T511OCTGBFIS  ,MMC receive 256 to 511 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 13. " RX128T255OCTGBFIS  ,MMC receive 128 to 255 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 12. "                   RX65T127OCTGBFIS   ,MMC receive 65 to 127 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 11. "                  RX64OCTGBFIS       ,MMC receive 64 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 10. " RXOSIZEGFIS        ,MMC receive oversize good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 9. "                   RXUSIZEGFIS        ,MMC receive undersize good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 8. "                  RXJABERFIS         ,MMC receive jabber error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 7. " RXRUNTFIS          ,MMC receive runt frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 6. "                   RXALGNERFIS        ,MMC receive alignment error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 5. "                  RXCRCERFIS         ,MMC receive CRC error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 4. " RXMCGFIS           ,MMC receive multicast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 3. "                   RXBCGFIS           ,MMC receive broadcast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 2. "                  RXGOCTIS           ,MMC receive good octet counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 1. " RXGBOCTIS          ,MMC receive good bad octet counter interrupt status" "Inactive,Active"
bitfld.long 0x00 0. "                   RXGBFRMIS          ,MMC receive good bad frame counter interrupt status" "ALMOSTHALF,ALMOSTFULL"
line.long 0x04 "GMACGRP_MMC_TRANSMIT_INTERRUPT,MMC Transmit Interrupt Register"
bitfld.long 0x04 25. " TXOSIZEGFIS        ,MMC transmit oversize good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 24. "                   TXVLANGFIS         ,MMC transmit VLAN good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 23. "                  TXPAUSFIS          ,MMC transmit pause frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 22. " TXEXDEFFIS         ,MMC transmit excessive deferral frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 21. "                   TXGFRMIS           ,MMC transmit good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 20. "                  TXGOCTIS           ,MMC transmit good octet counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 19. " TXCARERFIS         ,MMC transmit carrier error frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 18. "                   TXEXCOLFIS         ,MMC transmit excessive collision frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 17. "                  TXLATCOLFIS        ,MMC transmit late collision frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 16. " TXDEFFIS           ,MMC transmit deferred frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 15. "                   TXMCOLGFIS         ,MMC transmit multiple collision good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 14. "                  TXSCOLGFIS         ,MMC transmit single collision good frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 13. " TXUFLOWERFIS       ,MMC transmit underflow error frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 12. "                   TXBCGBFIS          ,MMC transmit broadcast good bad frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 11. "                  TXMCGBFIS          ,MMC transmit multicast good bad frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 10. " TXUCGBFIS          ,MMC transmit unicast good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 9. "                   TX1024TMAXOCTGBFIS ,MMC transmit 1024 to maximum octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 8. "                  TX512T1023OCTGBFIS ,MMC transmit 512 to 1023 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 7. " TX256T511OCTGBFIS  ,MMC transmit 256 to 511 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 6. "                   TX128T255OCTGBFIS  ,MMC transmit 128 to 255 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 5. "                  TX65T127OCTGBFIS   ,MMC transmit 65 to 127 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 4. " TX64OCTGBFIS       ,MMC transmit 64 octet good bad frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 3. "                   TXMCGFIS           ,MMC transmit multicast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 2. "                  TXBCGFIS           ,MMC transmit broadcast good frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 1. " TXGBFRMIS          ,MMC transmit good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 0. "                   TXGBOCTIS          ,MMC transmit good bad octet counter interrupt status" "Inactive,Active"
group.long 0x10C++0x07
line.long 0x00 "GMACGRP_MMC_RECEIVE_INTERRUPT_MASK,MMC Receive Interrupt Mask Register"
bitfld.long 0x00 25. " RXCTRLFIM          ,MMC receive control frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 24. "                 RXRCVERRFIM        ,MMC receive error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 23. "                RXWDOGFIM          ,MMC Receive watchdog error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 22. " RXVLANGBFIM        ,MMC receive VLAN good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 21. "                 RXFOVFIM           ,MMC receive FIFO overflow frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 20. "                RXPAUSFIM          ,MMC receive pause frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 19. " RXORANGEFIM        ,MMC receive out of range error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 18. "                 RXLENERFIM         ,MMC receive length error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 17. "                RXUCGFIM           ,MMC receive unicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 16. " RX1024TMAXOCTGBFIM ,MMC receive 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 16. "                 RX1024TMAXOCTGBFIM ,MMC receive 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 15. "                RX512T1023OCTGBFIM ,MMC receive 512 to 1023 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 14. " RX256T511OCTGBFIM  ,MMC receive 256 to 511 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 13. "                 RX128T255OCTGBFIM  ,MMC receive 128 to 255 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 12. "                RX65T127OCTGBFIM   ,MMC receive 65 to 127 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 11. " RX64OCTGBFIM       ,MMC receive 64 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 10. "                 RXOSIZEGFIM        ,MMC receive oversize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 9. "                RXUSIZEGFIM        ,MMC receive undersize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 8. " RXJABERFIM         ,MMC receive jabber error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 7. "                 RXRUNTFIM          ,MMC receive runt frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 6. "                RXALGNERFIM        ,MMC receive alignment error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 5. " RXCRCERFIM         ,MMC receive CRC error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 4. "                 RXMCGFIM           ,MMC receive multicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 3. "                RXBCGFIM           ,MMC receive broadcast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 2. " RXGOCTIM           ,MMC receive good octet counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 1. "                 RXGBOCTIM          ,MMC receive good bad octet counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 0. "                RXGBFRMIM          ,MMC receive good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
line.long 0x04 "GMACGRP_MMC_TRANSMIT_INTERRUPT_MASK,MMC Transmit Interrupt Mask Register"
bitfld.long 0x04 25. " TXOSIZEGFIM        ,MMC transmit oversize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 24. "                 TXVLANGFIM         ,MMC transmit VLAN good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 23. "                TXPAUSFIM          ,MMC transmit pause frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 22. " TXEXDEFFIM         ,MMC transmit excessive deferral frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 21. "                 TXGFRMIM           ,MMC transmit good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 20. "                TXGOCTIM           ,MMC transmit good octet counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 19. " TXCARERFIM         ,MMC transmit carrier error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 18. "                 TXEXCOLFIM         ,MMC transmit excessive collision frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 17. "                TXLATCOLFIM        ,MMC transmit late collision frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 16. " TXDEFFIM           ,MMC transmit deferred frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 15. "                 TXMCOLGFIM         ,MMC transmit multiple collision good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 14. "                TXSCOLGFIM         ,MMC transmit single collision good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 13. " TXUFLOWERFIM       ,MMC transmit underflow error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 12. "                 TXBCGBFIM          ,MMC transmit broadcast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 11. "                TXMCGBFIM          ,MMC transmit multicast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 10. " TXUCGBFIM          ,MMC transmit unicast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 9. "                 TX1024TMAXOCTGBFIM ,MMC transmit 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 8. "                TX512T1023OCTGBFIM ,MMC transmit 512 to 1023 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 7. " TX256T511OCTGBFIM  ,MMC transmit 256 to 511 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 6. "                 TX128T255OCTGBFIM  ,MMC transmit 128 to 255 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 5. "                TX65T127OCTGBFIM   ,MMC transmit 65 to 127 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 4. " TX64OCTGBFIM       ,MMC transmit 64 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 3. "                 TXMCGFIM           ,MMC transmit multicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 2. "                TXBCGFIM           ,MMC transmit broadcast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 1. " TXGBFRMIM          ,MMC transmit good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 0. "                 TXGBOCTIM          ,MMC transmit good bad octet counter interrupt mask" "NOMASKINTR,MASKINTR"
rgroup.long 0x114++0x67
line.long 0x00 "GMACGRP_TXOCTETCOUNT_GB,Transmit Octet Count For Good and Bad Frames"
line.long 0x04 "GMACGRP_TXFRAMECOUNT_GB,Transmit Frame Count For Good And Bad Frames"
line.long 0x08 "GMACGRP_TXBROADCASTFRAMES_G,Transmit Frame Count For Good Broadcast Frames"
line.long 0x0C "GMACGRP_TXMULTICASTFRAMES_G,Transmit Frame Count For Good Multicast Frames"
line.long 0x10 "GMACGRP_TX64OCTETS_GB,Transmit Octet Count For Good And Bad 64 Byte Frames"
line.long 0x14 "GMACGRP_TX65TO127OCTETS_GB,Transmit Octet Count For Good And Bad 65 To 127 Bytes Frames"
line.long 0x18 "GMACGRP_TX128TO255OCTETS_GB,Transmit Octet Count For Good And Bad 128 To 255 Bytes Frames"
line.long 0x1C "GMACGRP_TX256TO511OCTETS_GB,Transmit Octet Count For Good And Bad 256 To 511 Bytes Frames"
line.long 0x20 "GMACGRP_TX512TO1023OCTETS_GB,Transmit Octet Count For Good And Bad 512 To 1023 Bytes Frames"
line.long 0x24 "GMACGRP_TX1024TOMAXOCTETS_GB,Transmit Octet Count For Good And Bad 1024 To Maxsize Bytes Frames"
line.long 0x28 "GMACGRP_TXUNICASTFRAMES_GB,Transmit Frame Count For Good And Bad Unicast Frames"
line.long 0x2C "GMACGRP_TXMULTICASTFRAMES_GB,Transmit Frame Count For Good And Bad Multicast Frames"
line.long 0x30 "GMACGRP_TXBROADCASTFRAMES_GB,Transmit Frame Count For Good And Bad Broadcast Frames"
line.long 0x34 "GMACGRP_TXUNDERFLOWERROR,Transmit Frame Count For Underflow Error Frames"
line.long 0x38 "GMACGRP_TXSINGLECOL_G,Transmit Frame Count For Frames Transmitted After Single Collision"
line.long 0x3C "GMACGRP_TXMULTICOL_G,Transmit Frame Count For Frames Transmitted After Multiple Collision"
line.long 0x40 "GMACGRP_TXDEFERRED,Transmit Frame Count For Deferred Frames"
line.long 0x44 "GMACGRP_TXLATECOL,Transmit Frame Count For Late Collision Error Frames"
line.long 0x48 "GMACGRP_TXEXESSCOL,Transmit Frame Count For Excessive Collision Error Frames"
line.long 0x4C "GMACGRP_TXCARRIERERR,Transmit Frame Count For Carrier Sense Error Frames"
line.long 0x50 "GMACGRP_TXOCTETCNT,Transmit Octet Count For Good Frames"
line.long 0x54 "GMACGRP_TXFRAMECOUNT_G,Transmit Frame Count For Good Frames"
line.long 0x58 "GMACGRP_TXEXCESSDEF,Transmit Frame Count For Excessive Deferral Error Frames"
line.long 0x5C "GMACGRP_TXPAUSEFRAMES,Transmit Frame Count For Good PAUSE Frames"
line.long 0x60 "GMACGRP_TXVLANFRAMES_G,Transmit Frame Count For Good VLAN Frames"
line.long 0x64 "GMACGRP_TXOVERSIZE_G,Transmit Frame Count For Good Oversize Frames"
rgroup.long 0x180++0x67
line.long 0x00 "GMACGRP_RXFRAMECOUNT_GB,Receive Frame Count For Good And Bad Frames"
line.long 0x04 "GMACGRP_RXOCTETCOUNT_GB,Receive Octet Count For Good And Bad Frames"
line.long 0x08 "GMACGRP_RXOCTETCOUNT_G,Receive Octet Count For Good Frames"
line.long 0x0C "GMACGRP_RXBROADCASTFRAMES_G,Receive Frame Count For Good Broadcast Frames"
line.long 0x10 "GMACGRP_RXMULTICASTFRAMES_G,Receive Frame Count For Good Multicast Frames"
line.long 0x14 "GMACGRP_RXCRCERROR,Receive Frame Count For CRC Error Frames"
line.long 0x18 "GMACGRP_RXALIGNMENTERROR,Receive Frame Count For Alignment Error Frames"
line.long 0x1C "GMACGRP_RXRUNTERROR,Receive Frame Count For Runt Error Frames"
line.long 0x20 "GMACGRP_RXJABBERERROR,Receive Frame Count For Jabber Error Frames"
line.long 0x24 "GMACGRP_RXUNDERSIZE_G,Receive Frame Count For Undersize Frames"
line.long 0x28 "GMACGRP_RXOVERSIZE_G,Receive Frame Count For Oversize Frames"
line.long 0x2C "GMACGRP_RX64OCTETS_GB,Receive Frame Count For Good And Bad 64 Byte Frames"
line.long 0x30 "GMACGRP_RX65TO127OCTETS_GB,Receive Frame Count For Good And Bad 65 To 127 Bytes Frames"
line.long 0x34 "GMACGRP_RX128TO255OCTETS_GB,Receive Frame Count For Good And Bad 128 To 255 Bytes Frames"
line.long 0x38 "GMACGRP_RX256TO511OCTETS_GB,Receive Frame Count For Good And Bad 256 To 511 Bytes Frames"
line.long 0x3C "GMACGRP_RX512TO1023OCTETS_GB,Receive Frame Count For Good And Bad 512 To 1023 Bytes Frames"
line.long 0x40 "GMACGRP_RX1024TOMAXOCTETS_GB,Receive Frame Count For Good And Bad 1024 To Maxsize Bytes Frames"
line.long 0x44 "GMACGRP_RXUNICASTFRAMES_G,Receive Frame Count For Good Unicast Frames"
line.long 0x48 "GMACGRP_RXLENGTHERROR,Receive Frame Count For Length Error Frames"
line.long 0x4C "GMACGRP_RXOUTOFRANGETYPE,Receive Frame Count For Out Of Range Frames"
line.long 0x50 "GMACGRP_RXPAUSEFRAMES,Receive Frame Count For PAUSE Frames"
line.long 0x54 "GMACGRP_RXFIFOOVERFLOW,Receive Frame Count For FIFO Overflow Frames"
line.long 0x58 "GMACGRP_RXVLANFRAMES_GB,Receive Frame Count For Good and Bad VLAN Frames"
line.long 0x5C "GMACGRP_RXWATCHDOGERROR,Receive Frame Count For Watchdog Error Frames"
line.long 0x60 "GMACGRP_RXRCVERROR,Receive Frame Count For Receive Error Frames"
line.long 0x64 "GMACGRP_RXCTRLFRAMES_G,Receive Frame Count For Good Control Frames Frames"
group.long 0x200++0x03
line.long 0x00 "GMACGRP_MMC_IPC_RECEIVE_INTERRUPT_MASK,MMC Receive Checksum Offload Interrupt Mask Register"
bitfld.long 0x00 29. " RXICMPEROIM        ,Setting this bit masks the interrupt when the RXICMP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 28. "                 RXICMPGOIM         ,Setting this bit masks the interrupt when the RXICMP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 27. "                RXTCPEROIM         ,Setting this bit masks the interrupt when the RXTCP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 26. " RXTCPGOIM          ,Setting this bit masks the interrupt when the RXTCP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 25. "                 RXUDPEROIM         ,Setting this bit masks the interrupt when the RXUDP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 24. "                RXUDPGOIM          ,Setting this bit masks the interrupt when the RXUDP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 23. " RXIPV6NOPAYOIM     ,Setting this bit masks the interrupt when the RXIPV6_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 22. "                 RXIPV6HEROIM       ,Setting this bit masks the interrupt when the RXIPV6_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 21. "                RXIPV6GOIM         ,Setting this bit masks the interrupt when the RXIPV6_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 20. " RXIPV4UDSBLOIM     ,Setting this bit masks the interrupt when the RXIPV4_UDSBL_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 19. "                 RXIPV4FRAGOIM      ,Setting this bit masks the interrupt when the RXIPV4_FRAG_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 18. "                RXIPV4NOPAYOIM     ,Setting this bit masks the interrupt when the RXIPV4_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 17. " RXIPV4HEROIM       ,Setting this bit masks the interrupt when the RXIPV4_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 16. "                 RXIPV4GOIM         ,Setting this bit masks the interrupt when the RXIPV4_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 13. "                RXICMPERFIM        ,Setting this bit masks the interrupt when the RXICMP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 12. " RXICMPGFIM         ,Setting this bit masks the interrupt when the RXICMP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 11. "                 RXTCPERFIM         ,Setting this bit masks the interrupt when the RXTCP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 10. "                RXTCPGFIM          ,Setting this bit masks the interrupt when the RXTCP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 9. " RXUDPERFIM         ,Setting this bit masks the interrupt when the RXUDP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 8. "                 RXUDPGFIM          ,Setting this bit masks the interrupt when the RXUDP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 7. "                RXIPV6NOPAYFIM     ,Setting this bit masks the interrupt when the RXIPV6_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 6. " RXIPV6HERFIM       ,Setting this bit masks the interrupt when the RXIPV6_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 5. "                 RXIPV6GFIM         ,Setting this bit masks the interrupt when the RXIPV6_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 4. "                RXIPV4UDSBLFIM     ,Setting this bit masks the interrupt when the RXIPV4_UDSBL_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 3. " RXIPV4FRAGFIM      ,Setting this bit masks the interrupt when the RXIPV4_FRAG_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 2. "                 RXIPV4NOPAYFIM     ,Setting this bit masks the interrupt when the RXIPV4_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 1. "                RXIPV4HERFIM       ,Setting this bit masks the interrupt when the RXIPV4_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 0. " RXIPV4GFIM         ,Setting this bit masks the interrupt when the RXIPV4_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
rgroup.long 0x208++0x03
line.long 0x00 "GMACGRP_MMC_IPC_RECEIVE_INTERRUPT,MMC Receive Checksum Offload Interrupt Register"
bitfld.long 0x00 29. " RXICMPEROIS        ,This bit is set the RXICMP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 28. "               RXICMPGOIS         ,This bit is set the RXICMP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 27. "              RXTCPEROIS         ,This bit is set the RXTCP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 26. " RXTCPGOIS          ,This bit is set the RXTCP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 25. "               RXUDPEROIS         ,This bit is set the RXUDP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 24. "              RXUDPGOIS          ,This bit is set the RXUDP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. " RXIPV6NOPAYOIS     ,This bit is set the RXIPV6_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 22. "               RXIPV6HEROIS       ,This bit is set the RXIPV6_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 21. "              RXIPV6GOIS         ,This bit is set the RXIPV6_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 20. " RXIPV4UDSBLOIS     ,This bit is set the RXIPV4_UDSBL_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 19. "               RXIPV4FRAGOIS      ,This bit is set the RXIPV4_FRAG_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 18. "              RXIPV4NOPAYOIS     ,This bit is set the RXIPV4_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 17. " RXIPV4HEROIS       ,This bit is set the RXIPV4_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 16. "               RXIPV4GOIS         ,This bit is set the RXIPV4_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 13. "              RXICMPERFIS        ,This bit is set the RXICMP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " RXICMPGFIS         ,This bit is set the RXICMP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 11. "               RXTCPERFIS         ,This bit is set the RXTCP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 10. "              RXTCPGFIS          ,This bit is set the RXTCP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 9. " RXUDPERFIS         ,This bit is set the RXUDP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 8. "               RXUDPGFIS          ,This bit is set the RXUDP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 7. "              RXIPV6NOPAYFIS     ,This bit is set the RXIPV6_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " RXIPV6HERFIS       ,This bit is set the RXIPV6_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 5. "               RXIPV6GFIS         ,This bit is set the RXIPV6_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 4. "              RXIPV4UDSBLFIS     ,This bit is set the RXIPV4_UDSBL_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " RXIPV4FRAGFIS      ,This bit is set the RXIPV4_FRAG_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 2. "               RXIPV4NOPAYFIS     ,This bit is set the RXIPV4_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 1. "              RXIPV4HERFIS       ,This bit is set the RXIPV4_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " RXIPV4GFIS         ,This bit is set the RXIPV4_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
rgroup.long 0x210++0x37
line.long 0x00 "GMACGRP_RXIPV4_GD_FRMS,Number Of Good IPv4 Datagrams Received With The TCP/UDP/ICMP payload"
line.long 0x04 "GMACGRP_RXIPV4_HDRERR_FRMS,Number Of IPv4 Datagrams Received With Header (Checksum/Length/Version Mismatch) Errors"
line.long 0x08 "GMACGRP_RXIPV4_NOPAY_FRMS,Number Of IPv4 Datagram Frames Received That Did Not Have A TCP/UDP/ICMP Payload Processed By The Checksum Engine"
line.long 0x0C "GMACGRP_RXIPV4_FRAG_FRMS,Number Of Good IPv4 Datagrams With Fragmentation"
line.long 0x10 "GMACGRP_RXIPV4_UDSBL_FRMS,Number Of Good IPv4 Datagrams Received That Had A UDP Payload With Checksum Disabled"
line.long 0x14 "GMACGRP_RXIPV6_GD_FRMS,Number Of Good IPv6 Datagrams Received With TCP/UDP/ICMP Payloads"
line.long 0x18 "GMACGRP_RXIPV6_HDRERR_FRMS,Number Of IPv6 Datagrams Received With Header Errors (Length Or Version Mismatch)"
line.long 0x1C "GMACGRP_RXIPV6_NOPAY_FRMS,Number Of IPv6 Datagram Frames Received That Did Not Have A TCP/UDP/ICMP Payload"
line.long 0x20 "GMACGRP_RXUDP_GD_FRMS,Number Of Good IP Datagrams With A Good UDP Payload"
line.long 0x24 "GMACGRP_RXUDP_ERR_FRMS,Number Of Good IP Datagrams Whose UDP Payload Has A Checksum Error"
line.long 0x28 "GMACGRP_RXTCP_GD_FRMS,Number Of Good IP Datagrams With A Good TCP Payload"
line.long 0x2C "GMACGRP_RXTCP_ERR_FRMS,Number Of Good IP Datagrams Whose TCP Payload Has A Checksum Error"
line.long 0x30 "GMACGRP_RXICMP_GD_FRMS,Number Of Good IP Datagrams With A Good ICMP Payload"
line.long 0x34 "GMACGRP_RXICMP_ERR_FRMS,Number Of Good IP Datagrams Whose ICMP Payload Has A Checksum Error"
rgroup.long 0x250++0x37
line.long 0x00 "GMACGRP_RXIPV4_GD_OCTETS,Number Of Bytes Received In Good IPv4 Datagrams Encapsulating TCP/UDP/ICMP Data"
line.long 0x04 "GMACGRP_RXIPV4_HDRERR_OCTETS,Number Of Bytes Received In IPv4 Datagrams With Header Errors (checksum/length/version mismatch)"
line.long 0x08 "GMACGRP_RXIPV4_NOPAY_OCTETS,Number Of Bytes Received In IPv4 Datagrams That Did Not Have a TCP/UDP/ICMP Payload"
line.long 0x0C "GMACGRP_RXIPV4_FRAG_OCTETS,Number Of Bytes Received In Fragmented IPv4 Datagrams"
line.long 0x10 "GMACGRP_RXIPV4_UDSBL_OCTETS,Number Of Bytes Received In a UDP Segment That Had The UDP Checksum Disabled"
line.long 0x14 "GMACGRP_RXIPV6_GD_OCTETS,Number Of Bytes Received In Good IPv6 Datagrams Encapsulating TCP/UDP/ICMPv6 Data"
line.long 0x18 "GMACGRP_RXIPV6_HDRERR_OCTETS,Number Of Bytes Received In IPv6 Datagrams With Header Errors (Length/Version Mismatch)"
line.long 0x1C "GMACGRP_RXIPV6_NOPAY_OCTETS,Number Of Bytes Received In IPv6 Datagrams That Did Not Have A TCP/UDP/ICMP Payload"
line.long 0x20 "GMACGRP_RXUDP_GD_OCTETS,Number Of Bytes Received In A Good UDP Segment"
line.long 0x24 "GMACGRP_RXUDP_ERR_OCTETS,Number Of Bytes Received In A UDP Segment That Had Checksum Errors"
line.long 0x28 "GMACGRP_RXTCP_GD_OCTETS,Number Of Bytes Received In A Good TCP Segment"
line.long 0x2C "GMACGRP_RXTCPERROCTETS,Number Of Bytes Received In A TCP Segment With Checksum Errors"
line.long 0x30 "GMACGRP_RXICMP_GD_OCTETS,Number Of Bytes Received In A Good ICMP Segment"
line.long 0x34 "GMACGRP_RXICMP_ERR_OCTETS,Number Of Bytes Received In An ICMP Segment With Checksum Errors"
width 27.
tree "L3 L4 Control Registers"
group.long 0x400++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL0,Layer 3 And Layer 4 Control Register 0"
bitfld.long 0x00 21. " L4DPIM0            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM0             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM0            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM0             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN0             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM0            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM0            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM0            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM0             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM0            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM0             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN0             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 0"
hexmask.long.word 0x04 16.--31. 1. " L4DP0              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP0              ,Layer 4 source port number field"
group.long (0x400+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG0,Layer 3 Address 0 Register 0"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG0,Layer 3 Address 1 Register 0"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG0,Layer 3 Address 2 Register 0"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG0,Layer 3 Address 3 Register 0"
group.long 0x430++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL1,Layer 3 And Layer 4 Control Register 1"
bitfld.long 0x00 21. " L4DPIM1            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM1             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM1            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM1             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN1             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM1            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM1            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM1            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM1             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM1            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM1             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN1             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 1"
hexmask.long.word 0x04 16.--31. 1. " L4DP1              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP1              ,Layer 4 source port number field"
group.long (0x430+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG1,Layer 3 Address 0 Register 1"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG1,Layer 3 Address 1 Register 1"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG1,Layer 3 Address 2 Register 1"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG1,Layer 3 Address 3 Register 1"
group.long 0x460++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL2,Layer 3 And Layer 4 Control Register 2"
bitfld.long 0x00 21. " L4DPIM2            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM2             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM2            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM2             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN2             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM2            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM2            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM2            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM2             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM2            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM2             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN2             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 2"
hexmask.long.word 0x04 16.--31. 1. " L4DP2              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP2              ,Layer 4 source port number field"
group.long (0x460+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG2,Layer 3 Address 0 Register 2"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG2,Layer 3 Address 1 Register 2"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG2,Layer 3 Address 2 Register 2"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG2,Layer 3 Address 3 Register 2"
group.long 0x490++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL3,Layer 3 And Layer 4 Control Register 3"
bitfld.long 0x00 21. " L4DPIM3            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM3             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM3            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM3             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN3             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM3            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM3            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM3            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM3             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM3            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM3             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN3             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 3"
hexmask.long.word 0x04 16.--31. 1. " L4DP3              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP3              ,Layer 4 source port number field"
group.long (0x490+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG3,Layer 3 Address 0 Register 3"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG3,Layer 3 Address 1 Register 3"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG3,Layer 3 Address 2 Register 3"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG3,Layer 3 Address 3 Register 3"
tree.end
newline
width 40.
group.long 0x500++0x1F
line.long 0x00 "GMACGRP_HASH_TABLE_REG0,Hash Table Register 0"
line.long 0x04 "GMACGRP_HASH_TABLE_REG1,Hash Table Register 1"
line.long 0x08 "GMACGRP_HASH_TABLE_REG2,Hash Table Register 2"
line.long 0x0C "GMACGRP_HASH_TABLE_REG3,Hash Table Register 3"
line.long 0x10 "GMACGRP_HASH_TABLE_REG4,Hash Table Register 4"
line.long 0x14 "GMACGRP_HASH_TABLE_REG5,Hash Table Register 5"
line.long 0x18 "GMACGRP_HASH_TABLE_REG6,Hash Table Register 6"
line.long 0x1C "GMACGRP_HASH_TABLE_REG7,Hash Table Register 7"
group.long 0x584++0x07
line.long 0x00 "GMACGRP_VLAN_INCL_REG,VLAN Tag Inclusion Or Replacement Register"
bitfld.long 0x00 19. " CSVL               ,C-VLAN or S-VLAN" "C-VLAN,S-VLAN"
bitfld.long 0x00 18. "                     VLP                ,VLAN priority control" "0,1"
newline
bitfld.long 0x00 16.--17. " VLC                ,VLAN tag control in transmit frames" "No VLAN tag deletion/insertion/replacement,VLAN tag deletion,VLAN tag insertion,VLAN tag replacement"
hexmask.long.word 0x00 0.--15. 1. "                              VLT                ,VLAN tag for transmit frames"
line.long 0x04 "GMACGRP_VLAN_HASH_TABLE_REG,VLAN Hash Table Register"
hexmask.long.word 0x04 0.--15. 1. " VLHT               ,This field contains the 16-bit VLAN hash table"
group.long 0x700++0x07
line.long 0x00 "GMACGRP_TIMESTAMP_CONTROL,Timestamp Control Register"
bitfld.long 0x00 28. " ATSEN3             ,Auxiliary snapshot 3 enable" "Disabled,Enabled"
bitfld.long 0x00 27. "                   ATSEN2             ,Auxiliary snapshot 2 enable" "Disabled,Enabled"
bitfld.long 0x00 26. "                  ATSEN1             ,Auxiliary snapshot 1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. " ATSEN0             ,Auxiliary snapshot 0 enable" "Disabled,Enabled"
bitfld.long 0x00 24. "                   ATSFC              ,Auxiliary snapshot FIFO clear" "Disabled,Enabled"
bitfld.long 0x00 18. "                  TSENMACADDR        ,Enable MAC address for PTP frame filtering" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--17. " SNAPTYPSEL         ,Select PTP packets for taking snapshots" "0,1,2,3"
bitfld.long 0x00 15. "                          TSMSTRENA          ,Enable snapshot for messages relevant to master" "Slave,Master"
bitfld.long 0x00 14. "                    TSEVNTENA          ,Enable timestamp snapshot for event messages" "Disabled,Enabled"
newline
bitfld.long 0x00 13. " TSIPV4ENA          ,Enable processing of PTP frames sent over IPv4-UDP" "NO_PROCESS_PTP,PROCESS_PTP"
bitfld.long 0x00 12. "             TSIPV6ENA          ,Enable processing of PTP frames sent Over IPv6-UDP" "NO_PROCESS_PTP,PROCESS_PTP"
bitfld.long 0x00 11. "            TSIPENA            ,Enable processing of PTP over ETHERNET frames" "NO_PROCESS_PTP,PROCESS_PTP"
newline
bitfld.long 0x00 10. " TSVER2ENA          ,Enable PTP packet processing for version 2 format" "PTP_1588_VER1,PTP_1588_VER2"
bitfld.long 0x00 9. "              TSCTRLSSR          ,Timestamp digital or binary rollover control" "NOTIMESTAMP_LOW_ROLL_MAX,PTP_1588_VER2"
bitfld.long 0x00 8. "  TSENALL            ,Enable timestamp for all frames" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " TSADDREG           ,Addend reg update" "Not updated,Updated"
bitfld.long 0x00 4. "                TSTRIG             ,Timestamp interrupt trigger enable" "Disabled,Enabled"
bitfld.long 0x00 3. "                  TSUPDT             ,Timestamp update" "Not updated,Updated"
newline
bitfld.long 0x00 2. " TSINIT             ,Timestamp initialize" "Not initialized,Initialized"
bitfld.long 0x00 1. "            TSCFUPDT           ,Timestamp fine or coarse update" "Coarse,Fine"
bitfld.long 0x00 0. "                    TSENA              ,Timestamp enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_SUB_SECOND_INCREMENT,Sub-Second Increment Register"
hexmask.long.byte 0x04 0.--7. 1. " SSINC              ,The value programmed in this field is accumulated every clock cycle (of clk_ptp_i) with the contents of the sub-second register"
rgroup.long 0x708++0x07
line.long 0x00 "GMACGRP_SYSTEM_TIME_SECONDS,System Time - Seconds Register"
line.long 0x04 "GMACGRP_SYSTEM_TIME_NANOSECONDS,System Time - Nanoseconds Register"
hexmask.long 0x04 0.--30. 1. " TSSS               ,The value in this field has the sub second representation of time with an accuracy of 0.46 ns"
group.long 0x710++0x17
line.long 0x00 "GMACGRP_SYSTEM_TIME_SECONDS_UPDATE,System Time - Seconds Update Register"
line.long 0x04 "GMACGRP_SYSTEM_TIME_NANOSECONDS_UPDATE,System Time - Nanoseconds Update Register"
bitfld.long 0x04 31. " ADDSUB             ,When this bit is set the time value is subtracted with the contents of the update register" "Disabled,Enabled"
hexmask.long 0x04 0.--30. 1. "                   TSSS               ,The value in this field has the sub second representation of time with an accuracy of 0.46 ns"
line.long 0x08 "GMACGRP_TIMESTAMP_ADDEND,Timestamp Addend Register"
line.long 0x0C "GMACGRP_TARGET_TIME_SECONDS,Target Time Seconds Register"
line.long 0x10 "GMACGRP_TARGET_TIME_NANOSECONDS,Target Time Nanoseconds Register"
bitfld.long 0x10 31. " TRGTBUSY           ,The MAC sets this bit when the PPSCMD field in PPS control register is programmed to 010 or 011" "0,1"
hexmask.long 0x10 0.--30. 1. "                          TTSLO              ,This register stores the time in (signed) nanoseconds"
line.long 0x14 "GMACGRP_SYSTEM_TIME_HIGHER_WORD_SECONDS,System Time - Higher Word Seconds Register"
hexmask.long.word 0x14 0.--15. 1. " TSHWR              ,This field contains the most significant 16-bits of the timestamp seconds value"
hgroup.long 0x728++0x03
hide.long 0x00 "GMACGRP_TIMESTAMP_STATUS,Timestamp Status Register"
in
newline
group.long 0x72C++0x03
line.long 0x00 "GMACGRP_PPS_CONTROL,PPS Control Register"
bitfld.long 0x00 5.--6. " TRGTMODSEL0        ,This field indicates the Target Time registers mode for PPS0 output signal" "TRGTINTERONLY,,TRGTINTPPS0,TRGTNOINTER"
bitfld.long 0x00 4. "              PPSEN0             ,When set low bits[3:0] function as PPSCTRL (backward compatible). When set high bits[3:0] function as PPSCMD" "PPSCTRL,PPSCMD"
newline
bitfld.long 0x00 0.--3. " PPSCTRL_PPSCMD     ,PPS0 output frequency control [binary rollover/digital rollover]" ",2Hz/1Hz,4Hz/2Hz,8Hz/4Hz,16Hz/8Hz,32Hz/16Hz,64Hz/32Hz,128Hz/64Hz,256Hz/128Hz,512Hz/256Hz,1024Hz/512Hz,2048Hz/1024Hz,4096Hz/2048Hz,8192Hz/4096Hz,16384Hz/8192Hz,32768Hz/16384Hz"
rgroup.long 0x730++0x07
line.long 0x00 "GMACGRP_AUXILIARY_TIMESTAMP_NANOSECONDS,Auxiliary Timestamp Nanoseconds Register"
hexmask.long 0x00 0.--30. 1. " AUXTSLO            ,Contains the lower 32 bits (nano-seconds field) of the auxiliary timestamp"
line.long 0x04 "GMACGRP_AUXILIARY_TIMESTAMP_SECONDS,Auxiliary Timestamp - Seconds Register"
group.long 0x760++0x07
line.long 0x00 "GMACGRP_PPS0_INTERVAL,PPS0 Interval Register"
line.long 0x04 "GMACGRP_PPS0_WIDTH,PPS0 Width Register"
tree "MAC Address Registers"
group.long 0x800++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS16_HIGH,MAC Address16 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address16 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS16_LOW,MAC Address16 Low Register"
group.long 0x808++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS17_HIGH,MAC Address17 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address17 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS17_LOW,MAC Address17 Low Register"
group.long 0x810++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS18_HIGH,MAC Address18 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address18 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS18_LOW,MAC Address18 Low Register"
group.long 0x818++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS19_HIGH,MAC Address19 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address19 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS19_LOW,MAC Address19 Low Register"
group.long 0x820++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS20_HIGH,MAC Address20 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address20 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS20_LOW,MAC Address20 Low Register"
group.long 0x828++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS21_HIGH,MAC Address21 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address21 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS21_LOW,MAC Address21 Low Register"
group.long 0x830++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS22_HIGH,MAC Address22 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address22 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS22_LOW,MAC Address22 Low Register"
group.long 0x838++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS23_HIGH,MAC Address23 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address23 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS23_LOW,MAC Address23 Low Register"
group.long 0x840++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS24_HIGH,MAC Address24 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address24 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS24_LOW,MAC Address24 Low Register"
group.long 0x848++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS25_HIGH,MAC Address25 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address25 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS25_LOW,MAC Address25 Low Register"
group.long 0x850++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS26_HIGH,MAC Address26 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address26 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS26_LOW,MAC Address26 Low Register"
group.long 0x858++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS27_HIGH,MAC Address27 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address27 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS27_LOW,MAC Address27 Low Register"
group.long 0x860++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS28_HIGH,MAC Address28 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address28 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS28_LOW,MAC Address28 Low Register"
group.long 0x868++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS29_HIGH,MAC Address29 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address29 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS29_LOW,MAC Address29 Low Register"
group.long 0x870++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS30_HIGH,MAC Address30 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address30 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS30_LOW,MAC Address30 Low Register"
group.long 0x878++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS31_HIGH,MAC Address31 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address31 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS31_LOW,MAC Address31 Low Register"
group.long 0x880++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS32_HIGH,MAC Address32 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address32 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS32_LOW,MAC Address32 Low Register"
group.long 0x888++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS33_HIGH,MAC Address33 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address33 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS33_LOW,MAC Address33 Low Register"
group.long 0x890++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS34_HIGH,MAC Address34 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address34 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS34_LOW,MAC Address34 Low Register"
group.long 0x898++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS35_HIGH,MAC Address35 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address35 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS35_LOW,MAC Address35 Low Register"
group.long 0x8A0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS36_HIGH,MAC Address36 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address36 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS36_LOW,MAC Address36 Low Register"
group.long 0x8A8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS37_HIGH,MAC Address37 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address37 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS37_LOW,MAC Address37 Low Register"
group.long 0x8B0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS38_HIGH,MAC Address38 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address38 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS38_LOW,MAC Address38 Low Register"
group.long 0x8B8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS39_HIGH,MAC Address39 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address39 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS39_LOW,MAC Address39 Low Register"
group.long 0x8C0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS40_HIGH,MAC Address40 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address40 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS40_LOW,MAC Address40 Low Register"
group.long 0x8C8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS41_HIGH,MAC Address41 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address41 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS41_LOW,MAC Address41 Low Register"
group.long 0x8D0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS42_HIGH,MAC Address42 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address42 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS42_LOW,MAC Address42 Low Register"
group.long 0x8D8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS43_HIGH,MAC Address43 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address43 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS43_LOW,MAC Address43 Low Register"
group.long 0x8E0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS44_HIGH,MAC Address44 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address44 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS44_LOW,MAC Address44 Low Register"
group.long 0x8E8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS45_HIGH,MAC Address45 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address45 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS45_LOW,MAC Address45 Low Register"
group.long 0x8F0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS46_HIGH,MAC Address46 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address46 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS46_LOW,MAC Address46 Low Register"
group.long 0x8F8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS47_HIGH,MAC Address47 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address47 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS47_LOW,MAC Address47 Low Register"
group.long 0x900++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS48_HIGH,MAC Address48 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address48 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS48_LOW,MAC Address48 Low Register"
group.long 0x908++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS49_HIGH,MAC Address49 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address49 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS49_LOW,MAC Address49 Low Register"
group.long 0x910++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS50_HIGH,MAC Address50 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address50 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS50_LOW,MAC Address50 Low Register"
group.long 0x918++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS51_HIGH,MAC Address51 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address51 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS51_LOW,MAC Address51 Low Register"
group.long 0x920++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS52_HIGH,MAC Address52 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address52 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS52_LOW,MAC Address52 Low Register"
group.long 0x928++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS53_HIGH,MAC Address53 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address53 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS53_LOW,MAC Address53 Low Register"
group.long 0x930++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS54_HIGH,MAC Address54 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address54 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS54_LOW,MAC Address54 Low Register"
group.long 0x938++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS55_HIGH,MAC Address55 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address55 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS55_LOW,MAC Address55 Low Register"
group.long 0x940++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS56_HIGH,MAC Address56 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address56 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS56_LOW,MAC Address56 Low Register"
group.long 0x948++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS57_HIGH,MAC Address57 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address57 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS57_LOW,MAC Address57 Low Register"
group.long 0x950++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS58_HIGH,MAC Address58 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address58 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS58_LOW,MAC Address58 Low Register"
group.long 0x958++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS59_HIGH,MAC Address59 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address59 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS59_LOW,MAC Address59 Low Register"
group.long 0x960++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS60_HIGH,MAC Address60 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address60 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS60_LOW,MAC Address60 Low Register"
group.long 0x968++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS61_HIGH,MAC Address61 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address61 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS61_LOW,MAC Address61 Low Register"
group.long 0x970++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS62_HIGH,MAC Address62 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address62 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS62_LOW,MAC Address62 Low Register"
group.long 0x978++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS63_HIGH,MAC Address63 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address63 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS63_LOW,MAC Address63 Low Register"
group.long 0x980++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS64_HIGH,MAC Address64 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address64 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS64_LOW,MAC Address64 Low Register"
group.long 0x988++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS65_HIGH,MAC Address65 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address65 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS65_LOW,MAC Address65 Low Register"
group.long 0x990++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS66_HIGH,MAC Address66 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address66 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS66_LOW,MAC Address66 Low Register"
group.long 0x998++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS67_HIGH,MAC Address67 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address67 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS67_LOW,MAC Address67 Low Register"
group.long 0x9A0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS68_HIGH,MAC Address68 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address68 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS68_LOW,MAC Address68 Low Register"
group.long 0x9A8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS69_HIGH,MAC Address69 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address69 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS69_LOW,MAC Address69 Low Register"
group.long 0x9B0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS70_HIGH,MAC Address70 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address70 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS70_LOW,MAC Address70 Low Register"
group.long 0x9B8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS71_HIGH,MAC Address71 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address71 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS71_LOW,MAC Address71 Low Register"
group.long 0x9C0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS72_HIGH,MAC Address72 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address72 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS72_LOW,MAC Address72 Low Register"
group.long 0x9C8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS73_HIGH,MAC Address73 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address73 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS73_LOW,MAC Address73 Low Register"
group.long 0x9D0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS74_HIGH,MAC Address74 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address74 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS74_LOW,MAC Address74 Low Register"
group.long 0x9D8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS75_HIGH,MAC Address75 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address75 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS75_LOW,MAC Address75 Low Register"
group.long 0x9E0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS76_HIGH,MAC Address76 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address76 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS76_LOW,MAC Address76 Low Register"
group.long 0x9E8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS77_HIGH,MAC Address77 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address77 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS77_LOW,MAC Address77 Low Register"
group.long 0x9F0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS78_HIGH,MAC Address78 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address78 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS78_LOW,MAC Address78 Low Register"
group.long 0x9F8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS79_HIGH,MAC Address79 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address79 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS79_LOW,MAC Address79 Low Register"
group.long 0xA00++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS80_HIGH,MAC Address80 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address80 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS80_LOW,MAC Address80 Low Register"
group.long 0xA08++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS81_HIGH,MAC Address81 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address81 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS81_LOW,MAC Address81 Low Register"
group.long 0xA10++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS82_HIGH,MAC Address82 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address82 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS82_LOW,MAC Address82 Low Register"
group.long 0xA18++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS83_HIGH,MAC Address83 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address83 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS83_LOW,MAC Address83 Low Register"
group.long 0xA20++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS84_HIGH,MAC Address84 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address84 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS84_LOW,MAC Address84 Low Register"
group.long 0xA28++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS85_HIGH,MAC Address85 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address85 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS85_LOW,MAC Address85 Low Register"
group.long 0xA30++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS86_HIGH,MAC Address86 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address86 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS86_LOW,MAC Address86 Low Register"
group.long 0xA38++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS87_HIGH,MAC Address87 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address87 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS87_LOW,MAC Address87 Low Register"
group.long 0xA40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS88_HIGH,MAC Address88 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address88 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS88_LOW,MAC Address88 Low Register"
group.long 0xA48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS89_HIGH,MAC Address89 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address89 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS89_LOW,MAC Address89 Low Register"
group.long 0xA50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS90_HIGH,MAC Address90 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address90 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS90_LOW,MAC Address90 Low Register"
group.long 0xA58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS91_HIGH,MAC Address91 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address91 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS91_LOW,MAC Address91 Low Register"
group.long 0xA60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS92_HIGH,MAC Address92 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address92 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS92_LOW,MAC Address92 Low Register"
group.long 0xA68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS93_HIGH,MAC Address93 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address93 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS93_LOW,MAC Address93 Low Register"
group.long 0xA70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS94_HIGH,MAC Address94 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address94 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS94_LOW,MAC Address94 Low Register"
group.long 0xA78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS95_HIGH,MAC Address95 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address95 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS95_LOW,MAC Address95 Low Register"
group.long 0xA80++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS96_HIGH,MAC Address96 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address96 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS96_LOW,MAC Address96 Low Register"
group.long 0xA88++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS97_HIGH,MAC Address97 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address97 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS97_LOW,MAC Address97 Low Register"
group.long 0xA90++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS98_HIGH,MAC Address98 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address98 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS98_LOW,MAC Address98 Low Register"
group.long 0xA98++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS99_HIGH,MAC Address99 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address99 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS99_LOW,MAC Address99 Low Register"
group.long 0xAA0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS100_HIGH,MAC Address100 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address100 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS100_LOW,MAC Address100 Low Register"
group.long 0xAA8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS101_HIGH,MAC Address101 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address101 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS101_LOW,MAC Address101 Low Register"
group.long 0xAB0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS102_HIGH,MAC Address102 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address102 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS102_LOW,MAC Address102 Low Register"
group.long 0xAB8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS103_HIGH,MAC Address103 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address103 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS103_LOW,MAC Address103 Low Register"
group.long 0xAC0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS104_HIGH,MAC Address104 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address104 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS104_LOW,MAC Address104 Low Register"
group.long 0xAC8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS105_HIGH,MAC Address105 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address105 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS105_LOW,MAC Address105 Low Register"
group.long 0xAD0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS106_HIGH,MAC Address106 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address106 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS106_LOW,MAC Address106 Low Register"
group.long 0xAD8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS107_HIGH,MAC Address107 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address107 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS107_LOW,MAC Address107 Low Register"
group.long 0xAE0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS108_HIGH,MAC Address108 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address108 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS108_LOW,MAC Address108 Low Register"
group.long 0xAE8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS109_HIGH,MAC Address109 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address109 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS109_LOW,MAC Address109 Low Register"
group.long 0xAF0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS110_HIGH,MAC Address110 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address110 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS110_LOW,MAC Address110 Low Register"
group.long 0xAF8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS111_HIGH,MAC Address111 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address111 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS111_LOW,MAC Address111 Low Register"
group.long 0xB00++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS112_HIGH,MAC Address112 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address112 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS112_LOW,MAC Address112 Low Register"
group.long 0xB08++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS113_HIGH,MAC Address113 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address113 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS113_LOW,MAC Address113 Low Register"
group.long 0xB10++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS114_HIGH,MAC Address114 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address114 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS114_LOW,MAC Address114 Low Register"
group.long 0xB18++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS115_HIGH,MAC Address115 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address115 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS115_LOW,MAC Address115 Low Register"
group.long 0xB20++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS116_HIGH,MAC Address116 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address116 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS116_LOW,MAC Address116 Low Register"
group.long 0xB28++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS117_HIGH,MAC Address117 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address117 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS117_LOW,MAC Address117 Low Register"
group.long 0xB30++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS118_HIGH,MAC Address118 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address118 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS118_LOW,MAC Address118 Low Register"
group.long 0xB38++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS119_HIGH,MAC Address119 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address119 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS119_LOW,MAC Address119 Low Register"
group.long 0xB40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS120_HIGH,MAC Address120 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address120 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS120_LOW,MAC Address120 Low Register"
group.long 0xB48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS121_HIGH,MAC Address121 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address121 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS121_LOW,MAC Address121 Low Register"
group.long 0xB50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS122_HIGH,MAC Address122 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address122 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS122_LOW,MAC Address122 Low Register"
group.long 0xB58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS123_HIGH,MAC Address123 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address123 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS123_LOW,MAC Address123 Low Register"
group.long 0xB60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS124_HIGH,MAC Address124 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address124 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS124_LOW,MAC Address124 Low Register"
group.long 0xB68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS125_HIGH,MAC Address125 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address125 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS125_LOW,MAC Address125 Low Register"
group.long 0xB70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS126_HIGH,MAC Address126 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address126 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS126_LOW,MAC Address126 Low Register"
group.long 0xB78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS127_HIGH,MAC Address127 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address127 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS127_LOW,MAC Address127 Low Register"
tree.end
newline
group.long 0x1000++0x1F
line.long 0x00 "DMAGRP_BUS_MODE,Bus Mode Register"
bitfld.long 0x00 31. " RIB                ,Rebuild INCRx burst" "0,1"
bitfld.long 0x00 28.--29. "                          PRWG               ,Channel priority weights" "1,2,3,4"
bitfld.long 0x00 27. "                         TXPR               ,Transmit priority" "0,1"
newline
bitfld.long 0x00 26. " MB                 ,Mixed burst" "0,1"
bitfld.long 0x00 25. "                          AAL                ,Address aligned beats" "Disabled,Enabled"
bitfld.long 0x00 24. "                  EIGHTXPBL          ,PBLx8 mode" "Disabled,Enabled"
newline
bitfld.long 0x00 23. " USP                ,Use separate PBL" "Disabled,Enabled"
bitfld.long 0x00 17.--22. "                   RPBL               ,This field indicates the maximum number of beats to be transferred in one RX DMA transaction" ",RXDMAPBL1,RXDMAPBL2,,RXDMAPBL4,,,,RXDMAPBL8,,,,,,,,RXDMAPBL16,,,,,,,,,,,,,,,,RXDMAPBL20,?..."
bitfld.long 0x00 16. "                FB                 ,Fixed burst" "Non FB,FB1_4_8_16"
newline
bitfld.long 0x00 14.--15. " PR                 ,Priority ratio" "1:1,2:1,3:1,4:1"
bitfld.long 0x00 8.--13. "                        PBL                ,Programmable burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 7. "                        ATDS               ,Alternate descriptor size" "Clear RST,Reset"
newline
bitfld.long 0x00 2.--6. " DSL                ,Descriptor skip length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1. "                         DA                 ,DMA arbitration scheme" "Weighted round-robin,Fixed priority"
bitfld.long 0x00 0. "      SWR                ,Software reset" "Clear RST,Reset"
line.long 0x04 "DMAGRP_TRANSMIT_POLL_DEMAND,Transmit Poll Demand Register"
line.long 0x08 "DMAGRP_RECEIVE_POLL_DEMAND,Receive Poll Demand Register"
line.long 0x0C "DMAGRP_RECEIVE_DESCRIPTOR_LIST_ADDRESS,Receive Descriptor List Address Register"
hexmask.long 0x0C 2.--31. 0x04 " RDESLA_32BIT       ,This field contains the base address of the first descriptor in the Receive Descriptor list"
line.long 0x10 "DMAGRP_TRANSMIT_DESCRIPTOR_LIST_ADDRESS,Transmit Descriptor List Address Register"
hexmask.long 0x10 2.--31. 0x04 " TDESLA_32BIT       ,This field contains the base address of the first descriptor in the Transmit Descriptor list"
line.long 0x14 "DMAGRP_STATUS,Status Register"
rbitfld.long 0x14 30. " GLPII              ,GMAC LPI interrupt for channel 0" "No interrupt,Interrupt"
rbitfld.long 0x14 29. "               TTI                ,Timestamp trigger interrupt" "No interrupt,Interrupt"
rbitfld.long 0x14 28. "              GPI                ,GMAC PMT interrupt" "No interrupt,Interrupt"
newline
rbitfld.long 0x14 27. " GMI                ,GMAC MMC interrupt" "No interrupt,Interrupt"
rbitfld.long 0x14 26. "               GLI                ,GMAC line interface interrupt" "No interrupt,Interrupt"
newline
rbitfld.long 0x14 23.--25. " EB                 ,Error bits" "RX DMA write data transfer,,,TX DMA read data transfer,RX DMA descriptor write access,TX DMA descriptor write access,RX DMA descriptor read access,TX DMA descriptor read access"
newline
rbitfld.long 0x14 20.--22. " TS                 ,Transmit process state" "STOPPED,RUNFETCH,RUNWAIT,RUNREAD,TIMESTMP,,SUSPTX,RUNCLOS"
rbitfld.long 0x14 17.--19. "                   RS                 ,Received process state" "STOPPED,RUNFETCH,,RUNWAIT,SUSPEND,RUNCLOSE,TIMESTMP,RUNTRANS"
eventfld.long 0x14 16. "                  NIS                ,Normal interrupt summary" "0,1"
newline
eventfld.long 0x14 15. " AIS                ,Abnormal interrupt summary" "0,1"
bitfld.long 0x14 14. "                          ERI                ,Early receive interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 13. "              FBI                ,Fatal bus error interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x14 10. " ETI                ,Early transmit interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 9. "               RWT                ,Receive watchdog timeout" "Not received,Received"
bitfld.long 0x14 8. "              RPS                ,Receive process stopped" "Not stopped,Stopped"
newline
bitfld.long 0x14 7. " RU                 ,Receive buffer unavailable" "No,Yes"
bitfld.long 0x14 6. "                        RI                 ,Receive interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 5. "              UNF                ,Transmit underflow" "No underflow,Underflow"
newline
bitfld.long 0x14 4. " OVF                ,Receive overflow" "Not overflow,Overflow"
bitfld.long 0x14 3. "               TJT                ,Transmit jabber timeout" "Not transmitted,Transmitted"
bitfld.long 0x14 2. "           TU                 ,Transmit buffer unavailable" "No,Yes"
newline
bitfld.long 0x14 1. " TPS                ,Transmit process stopped" "Not stopped,Stopped"
bitfld.long 0x14 0. "                TI                 ,Transmit interrupt" "No interrupt,Interrupt"
line.long 0x18 "DMAGRP_OPERATION_MODE,Operation Mode Register"
bitfld.long 0x18 26. " DT                 ,Disable dropping of TCP/IP checksum error frames" "Disabled,Enabled"
bitfld.long 0x18 25. "                   RSF                ,Receive store and forward" "Disabled,Enabled"
bitfld.long 0x18 24. "                  DFF                ,Disable flushing of received frames" "Disabled,Enabled"
newline
bitfld.long 0x18 23. " RFA_2              ,MSB of threshold for activating flow control" "Disabled,Enabled"
bitfld.long 0x18 22. "                   RFD_2              ,MSB of threshold for activating flow control" "Disabled,Enabled"
bitfld.long 0x18 21. "                  TSF                ,Transmit store and forward" "Disabled,Enabled"
newline
bitfld.long 0x18 14.--16. " TTC                ,Transmit threshold control" "TTCTHESH64,TTCTHRES128,TTCTHRES192,TTCTHRES256,TTCTHRES40,TTCTHRES32,TTCTHRES24,TTCTHRES16"
bitfld.long 0x18 13. "                ST                 ,Start or stop transmission command" "Disabled,Enabled"
bitfld.long 0x18 11.--12. "                  RFD                ,Threshold for deactivating flow control" "FIFOFULL_1K,FIFOFULL_2K,FIFOFULL_3K,FIFOFULL_4K"
newline
bitfld.long 0x18 9.--10. " RFA                ,Threshold for activating flow control" "FIFOFULL_1K,FIFOFULL_2K,FIFOFULL_3K,FIFOFULL_4K"
bitfld.long 0x18 7. "                FEF                ,Forward error frames" "Disabled,Enabled"
bitfld.long 0x18 6. "                  FUF                ,Forward undersized good frames" "Disabled,Enabled"
newline
bitfld.long 0x18 5. " DGF                ,Drop giant frames" "0,1"
bitfld.long 0x18 3.--4. "                          RTC                ,Receive threshold control" "THRFIFO64,THRFIFO32,THRFIFO96,THRFIFO128"
bitfld.long 0x18 2. "                OSF                ,Operate on second frame" "Disabled,Enabled"
newline
bitfld.long 0x18 1. " SR                 ,Start or stop receive" "Disabled,Enabled"
line.long 0x1C "DMAGRP_INTERRUPT_ENABLE,Interrupt Enable Register"
bitfld.long 0x1C 16. " NIE                ,Normal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x1C 15. "                   AIE                ,Abnormal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x1C 14. "                  ERE                ,Early receive interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 13. " FBE                ,Fatal bus error enable" "Disabled,Enabled"
bitfld.long 0x1C 10. "                   ETE                ,Early transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 9. "                  RWE                ,Receive watchdog timeout enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 8. " RSE                ,Receive stopped enable" "Disabled,Enabled"
bitfld.long 0x1C 7. "                   RUE                ,Receive buffer unavailable enable" "Disabled,Enabled"
bitfld.long 0x1C 6. "                  RIE                ,Receive interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 5. " UNE                ,Underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 4. "                   OVE                ,Overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 3. "                  TJE                ,Transmit jabber timeout enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 2. " TUE                ,Transmit buffer unavailable enable" "Disabled,Enabled"
bitfld.long 0x1C 1. "                   TSE                ,Transmit stopped enable" "Disabled,Enabled"
bitfld.long 0x1C 0. "                  TIE                ,Transmit interrupt enable" "Disabled,Enabled"
newline
width 48.
rgroup.long 0x1020++0x03
line.long 0x00 "DMAGRP_MISSED_FRAME_AND_BUFFER_OVERFLOW_COUNTER,Missed Frame And Buffer Overflow Counter Register"
bitfld.long 0x00 28. " OVFCNTOVF          ,Overflow bit for FIFO overflow counter" "0,1"
hexmask.long.word 0x00 17.--27. 1. "                          OVFFRMCNT          ,Overflow frame counter"
bitfld.long 0x00 16. "                      MISCNTOVF      ,Overflow bit for missed frame counter" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. " MISFRMCNT          ,Missed frame counter"
group.long 0x1024++0x07
line.long 0x00 "DMAGRP_RECEIVE_INTERRUPT_WATCHDOG_TIMER,Receive Interrupt Watchdog Timer Register"
hexmask.long.byte 0x00 0.--7. 1. " RIWT               ,RI watchdog timer count"
line.long 0x04 "DMAGRP_AXI_BUS_MODE,AXI Bus Mode Register"
bitfld.long 0x04 31. " EN_LPI             ,LPI mode enable" "Disabled,Enabled"
newline
bitfld.long 0x04 30. " LPI_XIT_FRM        ,GMAC-AXI come out of the LPI mode circumstances" "Any frame is received,Magic Packet or Remote Wake Up Packet is received"
newline
bitfld.long 0x04 20.--23. " WR_OSR_LMT         ,AXI maximum write outstanding request limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x04 16.--19. " RD_OSR_LMT         ,AXI maximum write outstanding request limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 13. "                         ONEKBBE            ,1KB boundary crossing enable for the GMAC-AXI master" "FOUR_K_BOUNDARY,ONE_K_BOUNDARY"
rbitfld.long 0x04 12. "           AXI_AAL        ,Reflects the Bit 25(AAL) Bus Mode Register" "0,1"
newline
bitfld.long 0x04 3. " BLEN16             ,GMAC-AXI is allowed to select a burst length of 16 on the AXI Master interface" "Disabled,Enabled"
bitfld.long 0x04 2. "                   BLEN8              ,GMAC-AXI is allowed to select a burst length of 8 on the AXI Master interface" "Disabled,Enabled"
bitfld.long 0x04 1. "                  BLEN4          ,GMAC-AXI is allowed to select a burst length of 4 on the AXI Master interface" "Disabled,Enabled"
newline
rbitfld.long 0x04 0. " UNDEFINED          ,Indicates the complement (invert) value of Bit 16 (FB) in Register 0 (Bus Mode Register[16])" "Disabled,Enabled"
rgroup.long 0x102C++0x03
line.long 0x00 "DMAGRP_AHB_OR_AXI_STATUS,AHB Or AXI Status Register"
bitfld.long 0x00 1. " AXIRDSTS           ,AXI master read channel status" "Low,High"
bitfld.long 0x00 0. "                       AXWHSTS            ,AXI master write channel or AHB master status" "Low,High"
rgroup.long 0x1048++0x13
line.long 0x00 "DMAGRP_CURRENT_HOST_TRANSMIT_DESCRIPTOR,Current Host Transmit Descriptor Register"
line.long 0x04 "DMAGRP_CURRENT_HOST_RECEIVE_DESCRIPTOR,Current Host Receive Descriptor Register"
line.long 0x08 "DMAGRP_CURRENT_HOST_TRANSMIT_BUFFER_ADDRESS,Current Host Transmit Buffer Address Register"
line.long 0x0C "DMAGRP_CURRENT_HOST_RECEIVE_BUFFER_ADDRESS,Current Host Receive Buffer Address Register"
line.long 0x10 "DMAGRP_HW_FEATURE,HW Feature Register"
bitfld.long 0x10 28.--30. " ACTPHYIF           ,Active or Selected PHY interface" "GMIIMII0,RGMII1,SGMII2,TBI3,RMII4,RTBI5,SMII6,REVMII7"
bitfld.long 0x10 27. "                   SAVLANINS          ,Source address or VLAN insertion" "0,1"
bitfld.long 0x10 26. "                         FLEXIPPSEN     ,Flexible pulse-per-second output" "0,1"
newline
bitfld.long 0x10 25. " INTTSEN            ,Timestamping with internal system time" "0,1"
bitfld.long 0x10 24. "                          ENHDESSEL          ,Alternate (enhanced descriptor)" "Disabled,Enabled"
bitfld.long 0x10 22.--23. "                  TXCHCNT        ,Number of additional TX channel" "0,1,2,3"
newline
bitfld.long 0x10 20.--21. " RXCHCNT            ,Number of additional RX channel" "0,1,2,3"
bitfld.long 0x10 19. "                          RXFIFOSIZE         ,RX FIFO > 2048 Bytes" "Disabled,Enabled"
bitfld.long 0x10 18. "                  RXTYP2COE      ,IP checksum offload (type 2) in RX" "Disabled,Enabled"
newline
bitfld.long 0x10 17. " RXTYP1COE          ,IP checksum offload (type 1) in RX" "Disabled,Enabled"
bitfld.long 0x10 16. "                   TXOESEL            ,Checksum offload in TX" "Disabled,Enabled"
bitfld.long 0x10 15. "                  AVSEL          ,AV feature" "Disabled,Enabled"
newline
bitfld.long 0x10 14. " EEESEL             ,Energy efficient ETHERNET" "Disabled,Enabled"
bitfld.long 0x10 13. "                   TSVER2SEL          ,IEEE 1588-2008 advanced timestamp" "Disabled,Enabled"
bitfld.long 0x10 12. "                  TSVER1SEL      ,Only IEEE 1588-2002 timestamp" "Disabled,Enabled"
newline
bitfld.long 0x10 11. " MMCSEL             ,RMON module" "Disabled,Enabled"
bitfld.long 0x10 10. "                   MGKSEL             ,PMT magic packet" "Disabled,Enabled"
bitfld.long 0x10 9. "                  RWKSEL         ,PMT remote wakeup" "Disabled,Enabled"
newline
bitfld.long 0x10 8. " SMASEL             ,SMA (MDIO) interface" "Disabled,Enabled"
bitfld.long 0x10 7. "                   L3L4FLTREN         ,Layer 3 and layer 4 filter feature" "0,1"
bitfld.long 0x10 6. "                         PCSSEL         ,PCS registers (TBI/SGMII/RTBI PHY interface)" "Disabled,Enabled"
newline
bitfld.long 0x10 5. " ADDMACADRSEL       ,Multiple MAC address registers" "Disabled,Enabled"
bitfld.long 0x10 4. "                   HASHSEL            ,HASH filter" "Disabled,Enabled"
bitfld.long 0x10 3. "                  EXTHASHEN      ,Expanded DA hash filter" "0,1"
newline
bitfld.long 0x10 2. " HDSEL              ,Half-Duplex support" "Disabled,Enabled"
bitfld.long 0x10 1. "                   GMIISEL            ,1000 Mbps support" "Disabled,Enabled"
bitfld.long 0x10 0. "                  MIISEL         ,10 or 100 Mbps support" "Disabled,Enabled"
group.long 0xDC++0x07
line.long 0x00 "GMACGRP_WDOG_TIMEOUT,Watchdog Timeout Register"
bitfld.long 0x00 16. " PWE                ,Programmable watchdog enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--13. 1. "                   WTO                ,Watchdog timeout"
line.long 0x04 "GMACGRP_GENPIO,General Purpose IO Register"
bitfld.long 0x04 24. " GPIT               ,GPI type" "Latched-low,Latched-high"
bitfld.long 0x04 16. "               GPIE               ,GPI interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 8. " GPO                ,General purpose output" "Drives not directly to GPO_O output ports,Drives directly to GPO_O output ports"
rbitfld.long 0x04 0. "                               GPIS           ,General purpose input status" "0,1"
width 0x0B
tree.end
tree "EMAC2"
base ad:0xFF804000
width 28.
group.long 0x00++0x07
line.long 0x00 "GMACGRP_MAC_CONFIGURATION,MAC Configuration Register"
bitfld.long 0x00 30. " SARC[2]            ,Source address selection" "0,1"
bitfld.long 0x00 28.--29. "                          SARC[1:0]          ,Source address operation type selection" "0,1,2,3"
bitfld.long 0x00 27. "                         TWOKPE             ,IEEE 802.3as support for 2k packets" "Not supported,Supported"
newline
bitfld.long 0x00 26. " SFTERR             ,SMII force transmit error" "Not forced,Forced"
bitfld.long 0x00 25. "                 CST                ,CRC stripping for type frames" "Disabled,Enabled"
bitfld.long 0x00 24. "                  TC                 ,Transmit configuration in RGMI/SGMII/SMII" "Disabled,Enabled"
newline
bitfld.long 0x00 23. " WD                 ,Watchdog disable" "No,Yes"
bitfld.long 0x00 22. "                        JD                 ,Jabber disable" "No,Yes"
bitfld.long 0x00 21. "                       BE                 ,Frame burst enable" "Disabled,Enabled"
newline
bitfld.long 0x00 20. " JE                 ,Jumbo frame enable" "Disabled,Enabled"
bitfld.long 0x00 17.--19. "                   IFG                ,Inter-frame gap" "IFG96BITTIMES,IFG88BITTIMES,IFG80BITTIMES,IFG72BITTIMES,IFG64BITTIMES,IFG56BITTIMES,IFG48BITTIMES,IFG40BITTIMES"
bitfld.long 0x00 16. "             DCRS               ,Disable carrier sense during transmission" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " PS                 ,Port select" "GMII1000SEL,MII10100SEL"
bitfld.long 0x00 14. "                FES                ,Speed select" "SPEED10,SPEED100"
bitfld.long 0x00 13. "                  DO                 ,Disable receive own" "No,Yes"
newline
bitfld.long 0x00 12. " LM                 ,Loopback mode" "Disabled,Enabled"
bitfld.long 0x00 11. "                   DM                 ,Duplex mode" "Disabled,Enabled"
bitfld.long 0x00 10. "                  IPC                ,Checksum offload" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " DR                 ,Disable retry" "No,Yes"
bitfld.long 0x00 8. "                        LUD                ,Link up or down" "Down,Up"
bitfld.long 0x00 7. "                      ACS                ,Automatic pad or CRC stripping" "Disabled,Enabled"
newline
bitfld.long 0x00 5.--6. " L                  ,Back-off limit" "BACKLIMTR10,BACKLIMTR8,BACKLIMTR4,BACKLIMTR1"
bitfld.long 0x00 4. "                BDC                ,Deferral check" "Disabled,Enabled"
bitfld.long 0x00 3. "                  TE                 ,Transmitter enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " RE                 ,Receiver enable" "Disabled,Enabled"
bitfld.long 0x00 0.--1. "                   PRELEN             ,Preamble length for transmit frames" "PREAM7BYTES,PREAM5BYTES,PREAM3BYTES,PREAM1BYTES"
line.long 0x04 "GMACGRP_MAC_FRAME_FILTER,MAC Frame Filter"
bitfld.long 0x04 31. " RA                 ,Receive all" "Disabled,Enabled"
bitfld.long 0x04 21. "                   DNTU               ,Drop non-TCP/UDP over IP frames" "Disabled,Enabled"
bitfld.long 0x04 20. "                  IPFE               ,Layer 3 and layer 4 filter enable" "Not dropped,Dropped"
newline
bitfld.long 0x04 16. " VTFE               ,VLAN tag filter enable" "Not dropped,Dropped"
bitfld.long 0x04 10. "                HPF                ,Hash or perfect filter" "Disabled,Enabled"
bitfld.long 0x04 9. "                  SAF                ,Source address filter enable" "Disabled,Enabled"
newline
bitfld.long 0x04 8. " SAIF               ,SA inverse filtering" "Disabled,Enabled"
bitfld.long 0x04 6.--7. "                   PCF                ,Pass control frames" "MACFLTALLCFR,MACFWDXPAUSE,MACFWDFAIL,MACFWDPASS"
bitfld.long 0x04 5. "              DBF                ,Disable broadcast frames" "Disabled,Enabled"
newline
bitfld.long 0x04 4. " PM                 ,Pass all multicast" "Disabled,Enabled"
bitfld.long 0x04 3. "                   DAIF               ,DA inverse filtering" "Disabled,Enabled"
bitfld.long 0x04 2. "                  HMC                ,Hash multicast" "Disabled,Enabled"
newline
bitfld.long 0x04 1. " HUC                ,Hash unicast" "Disabled,Enabled"
bitfld.long 0x04 0. "                   PR                 ,Promiscuous mode" "Disabled,Enabled"
group.long 0x10++0x0F
line.long 0x00 "GMACGRP_GMII_ADDRESS,GMII Address Register"
bitfld.long 0x00 11.--15. " PA                 ,Physical layer address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6.--10. "                         GR                 ,GMII register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 2.--5. "                        CR                 ,CSR clock range" "DIV42,DIV62,DIV16,DIV26,DIV102,DIV124,,,DIV4,DIV6,DIV8,DIV10,DIV12,DIV14,DIV16,DIV18"
newline
bitfld.long 0x00 1. " GW                 ,GMII write" "Disabled,Enabled"
bitfld.long 0x00 0. "                   GB                 ,GMII busy" "Disabled,Enabled"
line.long 0x04 "GMACGRP_GMII_DATA,GMII Data Register"
hexmask.long.word 0x04 0.--15. 1. " GD                 ,GMII data"
line.long 0x08 "GMACGRP_FLOW_CONTROL,Flow Control Register"
hexmask.long.word 0x08 16.--31. 1. " PT                 ,Pause time"
bitfld.long 0x08 7. "                       DZPQ               ,Disable zero-quanta pause" "Disabled,Enabled"
bitfld.long 0x08 4.--5. "                  PLT                ,Pause low threshold" "PAUSETIME_4,PAUSETIME_28,PAUSETIME_144,PAUSETIME_256"
newline
bitfld.long 0x08 3. " UP                 ,Unicast pause frame detect" "Disabled,Enabled"
bitfld.long 0x08 2. "                   RFE                ,Receive flow control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "                  TFE                ,Transmit flow control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. " FCA_BPA            ,Flow control busy or backpressure activate" "Disabled,Enabled"
line.long 0x0C "GMACGRP_VLAN_TAG,VLAN Tag Register"
bitfld.long 0x0C 19. " VTHM               ,VLAN tag hash table match enable" "Disabled,Enabled"
bitfld.long 0x0C 18. "                   ESVL               ,Enable S-VLAN" "Disabled,Enabled"
bitfld.long 0x0C 17. "                  VTIM               ,VLAN tag inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 16. " ETV                ,Enable 12-bit VLAN tag comparison" "Disabled,Enabled"
hexmask.long.word 0x0C 0.--15. 1. "                   VL                 ,VLAN tag identifier for receive frames"
rgroup.long 0x20++0x07
line.long 0x00 "GMACGRP_VERSION,Version Register"
hexmask.long.byte 0x00 8.--15. 1. " USERVER            ,User-defined version"
hexmask.long.byte 0x00 0.--7. 1. "                         SNPSVER            ,Synopsys-defined version"
line.long 0x04 "GMACGRP_DEBUG,Debug Register"
bitfld.long 0x04 25. " TXSTSFSTS          ,MTL TX status FIFO full status" "Inactive,Active"
bitfld.long 0x04 24. "                   TXFSTS             ,MTL TX FIFO not empty status" "Inactive,Active"
bitfld.long 0x04 22. "                  TWCSTS             ,MTL TX FIFO write controller active status" "Inactive,Active"
newline
bitfld.long 0x04 20.--21. " TRCSTS             ,MTL TX FIFO read controller status" "IDLE,READSTATE,WAITTXSTAT,WRTXSTAT"
bitfld.long 0x04 19. "                 TXPAUSED           ,MAC transmitter in pause" "Disabled,Enabled"
bitfld.long 0x04 17.--18. "                  TFCSTS             ,MAC transmit frame controller status" "IDLE,WAITIFG,XTPAUSE,XTINFRM"
newline
bitfld.long 0x04 16. " TPESTS             ,MAC GMII or MII transmit protocol engine status" "Disabled,Enabled"
bitfld.long 0x04 8.--9. "                   RXFSTS             ,MTL RX FIFO fill-level status" "RXFIFOEMPTY,RXFIFOBELLVL,RXFIFOABLVL,RXFIFOFULL"
bitfld.long 0x04 5.--6. "              RRCSTS             ,MTL RX FIFO read controller state" "IDLE,RDFRAMEDATA,RDFRAMESTAT,FLUSHFRDS"
newline
bitfld.long 0x04 4. " RWCSTS             ,MTL RX FIFO write controller active status" "Inactive,Active"
bitfld.long 0x04 2. "                   RFCFCSTS[1]        ,MAC receive frame controller FIFO status" "Inactive,Active"
bitfld.long 0x04 1. "                  RFCFCSTS[0]        ,MAC receive frame controller FIFO status" "Inactive,Active"
newline
bitfld.long 0x04 0. " RPESTS             ,MAC GMII or MII receive protocol engine status" "Inactive,Active"
group.long 0x30++0x07
line.long 0x00 "GMACGRP_LPI_CONTROL_STATUS,LPI Control And Status Register"
bitfld.long 0x00 19. " LPITXA             ,LPI TX automate" "Disabled,Enabled"
bitfld.long 0x00 18. "                   PLSEN              ,PHY link status enable" "Disabled,Enabled"
bitfld.long 0x00 17. "                  PLS                ,PHY link status" "Disabled,Enabled"
newline
bitfld.long 0x00 16. " LPIEN              ,LPI enable" "Disabled,Enabled"
bitfld.long 0x00 9. "                   RLPIST             ,Receive LPI state" "Inactive,Active"
bitfld.long 0x00 8. "                  TLPIST             ,Transmit LPI state" "Inactive,Active"
newline
bitfld.long 0x00 3. " RLPIEX             ,Receive LPI exit" "Inactive,Active"
bitfld.long 0x00 2. "                   RLPIEN             ,Receive LPI entry" "Inactive,Active"
bitfld.long 0x00 1. "                  TLPIEX             ,Transmit LPI exit" "Inactive,Active"
newline
bitfld.long 0x00 0. " TLPIEN             ,Transmit LPI entry" "Inactive,Active"
line.long 0x04 "GMACGRP_LPI_TIMERS_CONTROL,LPI Timers Control Register"
hexmask.long.word 0x04 16.--25. 1. " LST                ,LPI LS timer"
hexmask.long.word 0x04 0.--15. 1. "                       LWT                ,LPI TW timer"
rgroup.long 0x38++0x03
line.long 0x00 "GMACGRP_INTERRUPT_STATUS,Interrupt Register"
bitfld.long 0x00 11. " GPIIS              ,GPI interrupt status" "Inactive,Active"
bitfld.long 0x00 10. "                   LPIIS              ,LPI interrupt status" "Inactive,Active"
bitfld.long 0x00 9. "                  TSIS               ,Timestamp interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 7. " MMCRXIPIS          ,MMC receive checksum offload interrupt status" "Inactive,Active"
bitfld.long 0x00 6. "                   MMCTXIS            ,MMC transmit interrupt status" "Inactive,Active"
bitfld.long 0x00 5. "                  MMCRXIS            ,MMC receive interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x00 4. " MMCIS              ,MMC interrupt status" "Inactive,Active"
bitfld.long 0x00 3. "                   PMTIS              ,PMT interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 2. "              PCSANCIS           ,PCS auto-negotiation complete" "Not completed,Completed"
newline
bitfld.long 0x00 1. " PCSLCHGIS          ,PCS link status changed" "Not changed,Changed"
bitfld.long 0x00 0. "                RGSMIIIS           ,RGMII or SMII interrupt status" "Inactive,Active"
group.long 0x3C++0x03
line.long 0x00 "GMACGRP_INTERRUPT_MASK,Interrupt Mask Register"
bitfld.long 0x00 10. " LPIIM              ,LPI interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 9. "                   TSIM               ,Timestamp interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 3. "                  PMTIM              ,PMT interrupt mask" "Unmasked,Masked"
newline
bitfld.long 0x00 2. " PCSANCIM           ,PCS an completion interrupt mask" "Unmasked,Masked"
bitfld.long 0x00 1. "                   PCSLCHGIM          ,PCS link status interrupt mask" "Unmasked,Masked"
bitfld.long 0x00 0. "                  RGSMIIIM           ,RGMII or SMII interrupt mask" "Inactive,Active"
tree "GMACGRP_MAC_ADDRESS Registers"
group.long 0x40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS0_HIGH,MAC Address0 High Register"
rbitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address0 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS0_LOW,MAC Address0 Low Register"
group.long 0x48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS1_HIGH,MAC Address1 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address1 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS1_LOW,MAC Address1 Low Register"
group.long 0x50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS2_HIGH,MAC Address2 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address2 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS2_LOW,MAC Address2 Low Register"
group.long 0x58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS3_HIGH,MAC Address3 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address3 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS3_LOW,MAC Address3 Low Register"
group.long 0x60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS4_HIGH,MAC Address4 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address4 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS4_LOW,MAC Address4 Low Register"
group.long 0x68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS5_HIGH,MAC Address5 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address5 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS5_LOW,MAC Address5 Low Register"
group.long 0x70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS6_HIGH,MAC Address6 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address6 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS6_LOW,MAC Address6 Low Register"
group.long 0x78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS7_HIGH,MAC Address7 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address7 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS7_LOW,MAC Address7 Low Register"
group.long 0x80++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS8_HIGH,MAC Address8 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address8 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS8_LOW,MAC Address8 Low Register"
group.long 0x88++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS9_HIGH,MAC Address9 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address9 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS9_LOW,MAC Address9 Low Register"
group.long 0x90++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS10_HIGH,MAC Address10 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address10 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS10_LOW,MAC Address10 Low Register"
group.long 0x98++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS11_HIGH,MAC Address11 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address11 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS11_LOW,MAC Address11 Low Register"
group.long 0xA0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS12_HIGH,MAC Address12 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address12 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS12_LOW,MAC Address12 Low Register"
group.long 0xA8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS13_HIGH,MAC Address13 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address13 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS13_LOW,MAC Address13 Low Register"
group.long 0xB0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS14_HIGH,MAC Address14 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address14 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS14_LOW,MAC Address14 Low Register"
group.long 0xB8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS15_HIGH,MAC Address15 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address15 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS15_LOW,MAC Address15 Low Register"
tree.end
newline
width 42.
rgroup.long 0xD8++0x03
line.long 0x00 "GMACGRP_SGMII_RGMII_SMII_CONTROL_STATUS,SGMII/RGMII/SMII Status Register"
bitfld.long 0x00 3. " LNKSTS             ,This bit indicates whether the link is up or down" "LINKDOWN,LINKUP"
bitfld.long 0x00 1.--2. "                   LNKSPEED           ,This bit indicates the current speed of the link" "SPEED2POINT5MHZ,SPEED25MHZ,SPEED125MHZ,?..."
bitfld.long 0x00 0. "           LNKMOD             ,This bit indicates the current mode of operation of the link" "HALFDUP,FULLDUP"
group.long 0x100++0x03
line.long 0x00 "GMACGRP_MMC_CONTROL,MMC Control Register"
bitfld.long 0x00 8. " UCDBC              ,Update MMC counters for dropped broadcast frames" "Not updated,Updated"
bitfld.long 0x00 5. "                CNTPRSTLVL         ,Full-half preset" "ALMOSTHALF,ALMOSTFULL"
bitfld.long 0x00 4. "                CNTPRST            ,Counters preset" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " CNTFREEZ           ,MMC counter freeze" "Disabled,Enabled"
bitfld.long 0x00 2. "                   RSTONRD            ,Reset on read" "Disabled,Enabled"
bitfld.long 0x00 1. "                  CNTSTOPRO          ,Counters stop rollover" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " CNTRST             ,Counters reset" "Disabled,Enabled"
rgroup.long 0x104++0x07
line.long 0x00 "GMACGRP_MMC_RECEIVE_INTERRUPT,MMC Receive Interrupt Register"
bitfld.long 0x00 25. " RXCTRLFIS          ,MMC receive control frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 24. "                   RXRCVERRFIS        ,MMC receive error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 23. "                  RXWDOGFIS          ,MMC receive watchdog error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 22. " RXVLANGBFIS        ,MMC receive VLAN good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 21. "                   RXFOVFIS           ,MMC receive FIFO overflow frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 20. "                  RXPAUSFIS          ,MMC receive pause frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 19. " RXORANGEFIS        ,MMC receive out of range error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 18. "                   RXLENERFIS         ,MMC receive length error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 17. "                  RXUCGFIS           ,MMC receive unicast good frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 16. " RX1024TMAXOCTGBFIS ,MMC receive 1024 to maximum octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 15. "                   RX512T1023OCTGBFIS ,MMC receive 512 to 1023 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 14. "                  RX256T511OCTGBFIS  ,MMC receive 256 to 511 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 13. " RX128T255OCTGBFIS  ,MMC receive 128 to 255 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 12. "                   RX65T127OCTGBFIS   ,MMC receive 65 to 127 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 11. "                  RX64OCTGBFIS       ,MMC receive 64 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 10. " RXOSIZEGFIS        ,MMC receive oversize good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 9. "                   RXUSIZEGFIS        ,MMC receive undersize good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 8. "                  RXJABERFIS         ,MMC receive jabber error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 7. " RXRUNTFIS          ,MMC receive runt frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 6. "                   RXALGNERFIS        ,MMC receive alignment error frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 5. "                  RXCRCERFIS         ,MMC receive CRC error frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 4. " RXMCGFIS           ,MMC receive multicast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 3. "                   RXBCGFIS           ,MMC receive broadcast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x00 2. "                  RXGOCTIS           ,MMC receive good octet counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x00 1. " RXGBOCTIS          ,MMC receive good bad octet counter interrupt status" "Inactive,Active"
bitfld.long 0x00 0. "                   RXGBFRMIS          ,MMC receive good bad frame counter interrupt status" "ALMOSTHALF,ALMOSTFULL"
line.long 0x04 "GMACGRP_MMC_TRANSMIT_INTERRUPT,MMC Transmit Interrupt Register"
bitfld.long 0x04 25. " TXOSIZEGFIS        ,MMC transmit oversize good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 24. "                   TXVLANGFIS         ,MMC transmit VLAN good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 23. "                  TXPAUSFIS          ,MMC transmit pause frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 22. " TXEXDEFFIS         ,MMC transmit excessive deferral frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 21. "                   TXGFRMIS           ,MMC transmit good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 20. "                  TXGOCTIS           ,MMC transmit good octet counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 19. " TXCARERFIS         ,MMC transmit carrier error frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 18. "                   TXEXCOLFIS         ,MMC transmit excessive collision frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 17. "                  TXLATCOLFIS        ,MMC transmit late collision frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 16. " TXDEFFIS           ,MMC transmit deferred frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 15. "                   TXMCOLGFIS         ,MMC transmit multiple collision good frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 14. "                  TXSCOLGFIS         ,MMC transmit single collision good frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 13. " TXUFLOWERFIS       ,MMC transmit underflow error frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 12. "                   TXBCGBFIS          ,MMC transmit broadcast good bad frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 11. "                  TXMCGBFIS          ,MMC transmit multicast good bad frame counter interrupt status" "Disabled,Enabled"
newline
bitfld.long 0x04 10. " TXUCGBFIS          ,MMC transmit unicast good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 9. "                   TX1024TMAXOCTGBFIS ,MMC transmit 1024 to maximum octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 8. "                  TX512T1023OCTGBFIS ,MMC transmit 512 to 1023 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 7. " TX256T511OCTGBFIS  ,MMC transmit 256 to 511 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 6. "                   TX128T255OCTGBFIS  ,MMC transmit 128 to 255 octet good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 5. "                  TX65T127OCTGBFIS   ,MMC transmit 65 to 127 octet good bad frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 4. " TX64OCTGBFIS       ,MMC transmit 64 octet good bad frame counter interrupt status" "Disabled,Enabled"
bitfld.long 0x04 3. "                   TXMCGFIS           ,MMC transmit multicast good frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 2. "                  TXBCGFIS           ,MMC transmit broadcast good frame counter interrupt status" "Inactive,Active"
newline
bitfld.long 0x04 1. " TXGBFRMIS          ,MMC transmit good bad frame counter interrupt status" "Inactive,Active"
bitfld.long 0x04 0. "                   TXGBOCTIS          ,MMC transmit good bad octet counter interrupt status" "Inactive,Active"
group.long 0x10C++0x07
line.long 0x00 "GMACGRP_MMC_RECEIVE_INTERRUPT_MASK,MMC Receive Interrupt Mask Register"
bitfld.long 0x00 25. " RXCTRLFIM          ,MMC receive control frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 24. "                 RXRCVERRFIM        ,MMC receive error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 23. "                RXWDOGFIM          ,MMC Receive watchdog error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 22. " RXVLANGBFIM        ,MMC receive VLAN good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 21. "                 RXFOVFIM           ,MMC receive FIFO overflow frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 20. "                RXPAUSFIM          ,MMC receive pause frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 19. " RXORANGEFIM        ,MMC receive out of range error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 18. "                 RXLENERFIM         ,MMC receive length error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 17. "                RXUCGFIM           ,MMC receive unicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 16. " RX1024TMAXOCTGBFIM ,MMC receive 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 16. "                 RX1024TMAXOCTGBFIM ,MMC receive 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 15. "                RX512T1023OCTGBFIM ,MMC receive 512 to 1023 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 14. " RX256T511OCTGBFIM  ,MMC receive 256 to 511 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 13. "                 RX128T255OCTGBFIM  ,MMC receive 128 to 255 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 12. "                RX65T127OCTGBFIM   ,MMC receive 65 to 127 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 11. " RX64OCTGBFIM       ,MMC receive 64 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 10. "                 RXOSIZEGFIM        ,MMC receive oversize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 9. "                RXUSIZEGFIM        ,MMC receive undersize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 8. " RXJABERFIM         ,MMC receive jabber error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 7. "                 RXRUNTFIM          ,MMC receive runt frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 6. "                RXALGNERFIM        ,MMC receive alignment error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 5. " RXCRCERFIM         ,MMC receive CRC error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 4. "                 RXMCGFIM           ,MMC receive multicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 3. "                RXBCGFIM           ,MMC receive broadcast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 2. " RXGOCTIM           ,MMC receive good octet counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 1. "                 RXGBOCTIM          ,MMC receive good bad octet counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 0. "                RXGBFRMIM          ,MMC receive good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
line.long 0x04 "GMACGRP_MMC_TRANSMIT_INTERRUPT_MASK,MMC Transmit Interrupt Mask Register"
bitfld.long 0x04 25. " TXOSIZEGFIM        ,MMC transmit oversize good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 24. "                 TXVLANGFIM         ,MMC transmit VLAN good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 23. "                TXPAUSFIM          ,MMC transmit pause frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 22. " TXEXDEFFIM         ,MMC transmit excessive deferral frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 21. "                 TXGFRMIM           ,MMC transmit good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 20. "                TXGOCTIM           ,MMC transmit good octet counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 19. " TXCARERFIM         ,MMC transmit carrier error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 18. "                 TXEXCOLFIM         ,MMC transmit excessive collision frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 17. "                TXLATCOLFIM        ,MMC transmit late collision frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 16. " TXDEFFIM           ,MMC transmit deferred frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 15. "                 TXMCOLGFIM         ,MMC transmit multiple collision good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 14. "                TXSCOLGFIM         ,MMC transmit single collision good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 13. " TXUFLOWERFIM       ,MMC transmit underflow error frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 12. "                 TXBCGBFIM          ,MMC transmit broadcast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 11. "                TXMCGBFIM          ,MMC transmit multicast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 10. " TXUCGBFIM          ,MMC transmit unicast good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 9. "                 TX1024TMAXOCTGBFIM ,MMC transmit 1024 to maximum octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 8. "                TX512T1023OCTGBFIM ,MMC transmit 512 to 1023 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 7. " TX256T511OCTGBFIM  ,MMC transmit 256 to 511 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 6. "                 TX128T255OCTGBFIM  ,MMC transmit 128 to 255 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 5. "                TX65T127OCTGBFIM   ,MMC transmit 65 to 127 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 4. " TX64OCTGBFIM       ,MMC transmit 64 octet good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 3. "                 TXMCGFIM           ,MMC transmit multicast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 2. "                TXBCGFIM           ,MMC transmit broadcast good frame counter interrupt mask" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x04 1. " TXGBFRMIM          ,MMC transmit good bad frame counter interrupt mask" "NOMASKINTR,MASKINTR"
bitfld.long 0x04 0. "                 TXGBOCTIM          ,MMC transmit good bad octet counter interrupt mask" "NOMASKINTR,MASKINTR"
rgroup.long 0x114++0x67
line.long 0x00 "GMACGRP_TXOCTETCOUNT_GB,Transmit Octet Count For Good and Bad Frames"
line.long 0x04 "GMACGRP_TXFRAMECOUNT_GB,Transmit Frame Count For Good And Bad Frames"
line.long 0x08 "GMACGRP_TXBROADCASTFRAMES_G,Transmit Frame Count For Good Broadcast Frames"
line.long 0x0C "GMACGRP_TXMULTICASTFRAMES_G,Transmit Frame Count For Good Multicast Frames"
line.long 0x10 "GMACGRP_TX64OCTETS_GB,Transmit Octet Count For Good And Bad 64 Byte Frames"
line.long 0x14 "GMACGRP_TX65TO127OCTETS_GB,Transmit Octet Count For Good And Bad 65 To 127 Bytes Frames"
line.long 0x18 "GMACGRP_TX128TO255OCTETS_GB,Transmit Octet Count For Good And Bad 128 To 255 Bytes Frames"
line.long 0x1C "GMACGRP_TX256TO511OCTETS_GB,Transmit Octet Count For Good And Bad 256 To 511 Bytes Frames"
line.long 0x20 "GMACGRP_TX512TO1023OCTETS_GB,Transmit Octet Count For Good And Bad 512 To 1023 Bytes Frames"
line.long 0x24 "GMACGRP_TX1024TOMAXOCTETS_GB,Transmit Octet Count For Good And Bad 1024 To Maxsize Bytes Frames"
line.long 0x28 "GMACGRP_TXUNICASTFRAMES_GB,Transmit Frame Count For Good And Bad Unicast Frames"
line.long 0x2C "GMACGRP_TXMULTICASTFRAMES_GB,Transmit Frame Count For Good And Bad Multicast Frames"
line.long 0x30 "GMACGRP_TXBROADCASTFRAMES_GB,Transmit Frame Count For Good And Bad Broadcast Frames"
line.long 0x34 "GMACGRP_TXUNDERFLOWERROR,Transmit Frame Count For Underflow Error Frames"
line.long 0x38 "GMACGRP_TXSINGLECOL_G,Transmit Frame Count For Frames Transmitted After Single Collision"
line.long 0x3C "GMACGRP_TXMULTICOL_G,Transmit Frame Count For Frames Transmitted After Multiple Collision"
line.long 0x40 "GMACGRP_TXDEFERRED,Transmit Frame Count For Deferred Frames"
line.long 0x44 "GMACGRP_TXLATECOL,Transmit Frame Count For Late Collision Error Frames"
line.long 0x48 "GMACGRP_TXEXESSCOL,Transmit Frame Count For Excessive Collision Error Frames"
line.long 0x4C "GMACGRP_TXCARRIERERR,Transmit Frame Count For Carrier Sense Error Frames"
line.long 0x50 "GMACGRP_TXOCTETCNT,Transmit Octet Count For Good Frames"
line.long 0x54 "GMACGRP_TXFRAMECOUNT_G,Transmit Frame Count For Good Frames"
line.long 0x58 "GMACGRP_TXEXCESSDEF,Transmit Frame Count For Excessive Deferral Error Frames"
line.long 0x5C "GMACGRP_TXPAUSEFRAMES,Transmit Frame Count For Good PAUSE Frames"
line.long 0x60 "GMACGRP_TXVLANFRAMES_G,Transmit Frame Count For Good VLAN Frames"
line.long 0x64 "GMACGRP_TXOVERSIZE_G,Transmit Frame Count For Good Oversize Frames"
rgroup.long 0x180++0x67
line.long 0x00 "GMACGRP_RXFRAMECOUNT_GB,Receive Frame Count For Good And Bad Frames"
line.long 0x04 "GMACGRP_RXOCTETCOUNT_GB,Receive Octet Count For Good And Bad Frames"
line.long 0x08 "GMACGRP_RXOCTETCOUNT_G,Receive Octet Count For Good Frames"
line.long 0x0C "GMACGRP_RXBROADCASTFRAMES_G,Receive Frame Count For Good Broadcast Frames"
line.long 0x10 "GMACGRP_RXMULTICASTFRAMES_G,Receive Frame Count For Good Multicast Frames"
line.long 0x14 "GMACGRP_RXCRCERROR,Receive Frame Count For CRC Error Frames"
line.long 0x18 "GMACGRP_RXALIGNMENTERROR,Receive Frame Count For Alignment Error Frames"
line.long 0x1C "GMACGRP_RXRUNTERROR,Receive Frame Count For Runt Error Frames"
line.long 0x20 "GMACGRP_RXJABBERERROR,Receive Frame Count For Jabber Error Frames"
line.long 0x24 "GMACGRP_RXUNDERSIZE_G,Receive Frame Count For Undersize Frames"
line.long 0x28 "GMACGRP_RXOVERSIZE_G,Receive Frame Count For Oversize Frames"
line.long 0x2C "GMACGRP_RX64OCTETS_GB,Receive Frame Count For Good And Bad 64 Byte Frames"
line.long 0x30 "GMACGRP_RX65TO127OCTETS_GB,Receive Frame Count For Good And Bad 65 To 127 Bytes Frames"
line.long 0x34 "GMACGRP_RX128TO255OCTETS_GB,Receive Frame Count For Good And Bad 128 To 255 Bytes Frames"
line.long 0x38 "GMACGRP_RX256TO511OCTETS_GB,Receive Frame Count For Good And Bad 256 To 511 Bytes Frames"
line.long 0x3C "GMACGRP_RX512TO1023OCTETS_GB,Receive Frame Count For Good And Bad 512 To 1023 Bytes Frames"
line.long 0x40 "GMACGRP_RX1024TOMAXOCTETS_GB,Receive Frame Count For Good And Bad 1024 To Maxsize Bytes Frames"
line.long 0x44 "GMACGRP_RXUNICASTFRAMES_G,Receive Frame Count For Good Unicast Frames"
line.long 0x48 "GMACGRP_RXLENGTHERROR,Receive Frame Count For Length Error Frames"
line.long 0x4C "GMACGRP_RXOUTOFRANGETYPE,Receive Frame Count For Out Of Range Frames"
line.long 0x50 "GMACGRP_RXPAUSEFRAMES,Receive Frame Count For PAUSE Frames"
line.long 0x54 "GMACGRP_RXFIFOOVERFLOW,Receive Frame Count For FIFO Overflow Frames"
line.long 0x58 "GMACGRP_RXVLANFRAMES_GB,Receive Frame Count For Good and Bad VLAN Frames"
line.long 0x5C "GMACGRP_RXWATCHDOGERROR,Receive Frame Count For Watchdog Error Frames"
line.long 0x60 "GMACGRP_RXRCVERROR,Receive Frame Count For Receive Error Frames"
line.long 0x64 "GMACGRP_RXCTRLFRAMES_G,Receive Frame Count For Good Control Frames Frames"
group.long 0x200++0x03
line.long 0x00 "GMACGRP_MMC_IPC_RECEIVE_INTERRUPT_MASK,MMC Receive Checksum Offload Interrupt Mask Register"
bitfld.long 0x00 29. " RXICMPEROIM        ,Setting this bit masks the interrupt when the RXICMP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 28. "                 RXICMPGOIM         ,Setting this bit masks the interrupt when the RXICMP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 27. "                RXTCPEROIM         ,Setting this bit masks the interrupt when the RXTCP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 26. " RXTCPGOIM          ,Setting this bit masks the interrupt when the RXTCP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 25. "                 RXUDPEROIM         ,Setting this bit masks the interrupt when the RXUDP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 24. "                RXUDPGOIM          ,Setting this bit masks the interrupt when the RXUDP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 23. " RXIPV6NOPAYOIM     ,Setting this bit masks the interrupt when the RXIPV6_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 22. "                 RXIPV6HEROIM       ,Setting this bit masks the interrupt when the RXIPV6_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 21. "                RXIPV6GOIM         ,Setting this bit masks the interrupt when the RXIPV6_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 20. " RXIPV4UDSBLOIM     ,Setting this bit masks the interrupt when the RXIPV4_UDSBL_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 19. "                 RXIPV4FRAGOIM      ,Setting this bit masks the interrupt when the RXIPV4_FRAG_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 18. "                RXIPV4NOPAYOIM     ,Setting this bit masks the interrupt when the RXIPV4_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 17. " RXIPV4HEROIM       ,Setting this bit masks the interrupt when the RXIPV4_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 16. "                 RXIPV4GOIM         ,Setting this bit masks the interrupt when the RXIPV4_GD_OCTETS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 13. "                RXICMPERFIM        ,Setting this bit masks the interrupt when the RXICMP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 12. " RXICMPGFIM         ,Setting this bit masks the interrupt when the RXICMP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 11. "                 RXTCPERFIM         ,Setting this bit masks the interrupt when the RXTCP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 10. "                RXTCPGFIM          ,Setting this bit masks the interrupt when the RXTCP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 9. " RXUDPERFIM         ,Setting this bit masks the interrupt when the RXUDP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 8. "                 RXUDPGFIM          ,Setting this bit masks the interrupt when the RXUDP_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 7. "                RXIPV6NOPAYFIM     ,Setting this bit masks the interrupt when the RXIPV6_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 6. " RXIPV6HERFIM       ,Setting this bit masks the interrupt when the RXIPV6_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 5. "                 RXIPV6GFIM         ,Setting this bit masks the interrupt when the RXIPV6_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 4. "                RXIPV4UDSBLFIM     ,Setting this bit masks the interrupt when the RXIPV4_UDSBL_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 3. " RXIPV4FRAGFIM      ,Setting this bit masks the interrupt when the RXIPV4_FRAG_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 2. "                 RXIPV4NOPAYFIM     ,Setting this bit masks the interrupt when the RXIPV4_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
bitfld.long 0x00 1. "                RXIPV4HERFIM       ,Setting this bit masks the interrupt when the RXIPV4_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
newline
bitfld.long 0x00 0. " RXIPV4GFIM         ,Setting this bit masks the interrupt when the RXIPV4_GD_FRMS counter reaches half of the maximum value or the maximum value" "NOMASKINTR,MASKINTR"
rgroup.long 0x208++0x03
line.long 0x00 "GMACGRP_MMC_IPC_RECEIVE_INTERRUPT,MMC Receive Checksum Offload Interrupt Register"
bitfld.long 0x00 29. " RXICMPEROIS        ,This bit is set the RXICMP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 28. "               RXICMPGOIS         ,This bit is set the RXICMP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 27. "              RXTCPEROIS         ,This bit is set the RXTCP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 26. " RXTCPGOIS          ,This bit is set the RXTCP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 25. "               RXUDPEROIS         ,This bit is set the RXUDP_ERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 24. "              RXUDPGOIS          ,This bit is set the RXUDP_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. " RXIPV6NOPAYOIS     ,This bit is set the RXIPV6_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 22. "               RXIPV6HEROIS       ,This bit is set the RXIPV6_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 21. "              RXIPV6GOIS         ,This bit is set the RXIPV6_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 20. " RXIPV4UDSBLOIS     ,This bit is set the RXIPV4_UDSBL_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 19. "               RXIPV4FRAGOIS      ,This bit is set the RXIPV4_FRAG_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 18. "              RXIPV4NOPAYOIS     ,This bit is set the RXIPV4_NOPAY_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 17. " RXIPV4HEROIS       ,This bit is set the RXIPV4_HDRERR_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 16. "               RXIPV4GOIS         ,This bit is set the RXIPV4_GD_OCTETS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 13. "              RXICMPERFIS        ,This bit is set the RXICMP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " RXICMPGFIS         ,This bit is set the RXICMP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 11. "               RXTCPERFIS         ,This bit is set the RXTCP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 10. "              RXTCPGFIS          ,This bit is set the RXTCP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 9. " RXUDPERFIS         ,This bit is set the RXUDP_ERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 8. "               RXUDPGFIS          ,This bit is set the RXUDP_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 7. "              RXIPV6NOPAYFIS     ,This bit is set the RXIPV6_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " RXIPV6HERFIS       ,This bit is set the RXIPV6_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 5. "               RXIPV6GFIS         ,This bit is set the RXIPV6_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 4. "              RXIPV4UDSBLFIS     ,This bit is set the RXIPV4_UDSBL_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " RXIPV4FRAGFIS      ,This bit is set the RXIPV4_FRAG_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 2. "               RXIPV4NOPAYFIS     ,This bit is set the RXIPV4_NOPAY_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
bitfld.long 0x00 1. "              RXIPV4HERFIS       ,This bit is set the RXIPV4_HDRERR_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " RXIPV4GFIS         ,This bit is set the RXIPV4_GD_FRMS counter reaches half of the maximum value or the maximum value" "No interrupt,Interrupt"
rgroup.long 0x210++0x37
line.long 0x00 "GMACGRP_RXIPV4_GD_FRMS,Number Of Good IPv4 Datagrams Received With The TCP/UDP/ICMP payload"
line.long 0x04 "GMACGRP_RXIPV4_HDRERR_FRMS,Number Of IPv4 Datagrams Received With Header (Checksum/Length/Version Mismatch) Errors"
line.long 0x08 "GMACGRP_RXIPV4_NOPAY_FRMS,Number Of IPv4 Datagram Frames Received That Did Not Have A TCP/UDP/ICMP Payload Processed By The Checksum Engine"
line.long 0x0C "GMACGRP_RXIPV4_FRAG_FRMS,Number Of Good IPv4 Datagrams With Fragmentation"
line.long 0x10 "GMACGRP_RXIPV4_UDSBL_FRMS,Number Of Good IPv4 Datagrams Received That Had A UDP Payload With Checksum Disabled"
line.long 0x14 "GMACGRP_RXIPV6_GD_FRMS,Number Of Good IPv6 Datagrams Received With TCP/UDP/ICMP Payloads"
line.long 0x18 "GMACGRP_RXIPV6_HDRERR_FRMS,Number Of IPv6 Datagrams Received With Header Errors (Length Or Version Mismatch)"
line.long 0x1C "GMACGRP_RXIPV6_NOPAY_FRMS,Number Of IPv6 Datagram Frames Received That Did Not Have A TCP/UDP/ICMP Payload"
line.long 0x20 "GMACGRP_RXUDP_GD_FRMS,Number Of Good IP Datagrams With A Good UDP Payload"
line.long 0x24 "GMACGRP_RXUDP_ERR_FRMS,Number Of Good IP Datagrams Whose UDP Payload Has A Checksum Error"
line.long 0x28 "GMACGRP_RXTCP_GD_FRMS,Number Of Good IP Datagrams With A Good TCP Payload"
line.long 0x2C "GMACGRP_RXTCP_ERR_FRMS,Number Of Good IP Datagrams Whose TCP Payload Has A Checksum Error"
line.long 0x30 "GMACGRP_RXICMP_GD_FRMS,Number Of Good IP Datagrams With A Good ICMP Payload"
line.long 0x34 "GMACGRP_RXICMP_ERR_FRMS,Number Of Good IP Datagrams Whose ICMP Payload Has A Checksum Error"
rgroup.long 0x250++0x37
line.long 0x00 "GMACGRP_RXIPV4_GD_OCTETS,Number Of Bytes Received In Good IPv4 Datagrams Encapsulating TCP/UDP/ICMP Data"
line.long 0x04 "GMACGRP_RXIPV4_HDRERR_OCTETS,Number Of Bytes Received In IPv4 Datagrams With Header Errors (checksum/length/version mismatch)"
line.long 0x08 "GMACGRP_RXIPV4_NOPAY_OCTETS,Number Of Bytes Received In IPv4 Datagrams That Did Not Have a TCP/UDP/ICMP Payload"
line.long 0x0C "GMACGRP_RXIPV4_FRAG_OCTETS,Number Of Bytes Received In Fragmented IPv4 Datagrams"
line.long 0x10 "GMACGRP_RXIPV4_UDSBL_OCTETS,Number Of Bytes Received In a UDP Segment That Had The UDP Checksum Disabled"
line.long 0x14 "GMACGRP_RXIPV6_GD_OCTETS,Number Of Bytes Received In Good IPv6 Datagrams Encapsulating TCP/UDP/ICMPv6 Data"
line.long 0x18 "GMACGRP_RXIPV6_HDRERR_OCTETS,Number Of Bytes Received In IPv6 Datagrams With Header Errors (Length/Version Mismatch)"
line.long 0x1C "GMACGRP_RXIPV6_NOPAY_OCTETS,Number Of Bytes Received In IPv6 Datagrams That Did Not Have A TCP/UDP/ICMP Payload"
line.long 0x20 "GMACGRP_RXUDP_GD_OCTETS,Number Of Bytes Received In A Good UDP Segment"
line.long 0x24 "GMACGRP_RXUDP_ERR_OCTETS,Number Of Bytes Received In A UDP Segment That Had Checksum Errors"
line.long 0x28 "GMACGRP_RXTCP_GD_OCTETS,Number Of Bytes Received In A Good TCP Segment"
line.long 0x2C "GMACGRP_RXTCPERROCTETS,Number Of Bytes Received In A TCP Segment With Checksum Errors"
line.long 0x30 "GMACGRP_RXICMP_GD_OCTETS,Number Of Bytes Received In A Good ICMP Segment"
line.long 0x34 "GMACGRP_RXICMP_ERR_OCTETS,Number Of Bytes Received In An ICMP Segment With Checksum Errors"
width 27.
tree "L3 L4 Control Registers"
group.long 0x400++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL0,Layer 3 And Layer 4 Control Register 0"
bitfld.long 0x00 21. " L4DPIM0            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM0             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM0            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM0             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN0             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM0            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM0            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM0            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM0             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM0            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM0             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN0             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 0"
hexmask.long.word 0x04 16.--31. 1. " L4DP0              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP0              ,Layer 4 source port number field"
group.long (0x400+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG0,Layer 3 Address 0 Register 0"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG0,Layer 3 Address 1 Register 0"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG0,Layer 3 Address 2 Register 0"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG0,Layer 3 Address 3 Register 0"
group.long 0x430++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL1,Layer 3 And Layer 4 Control Register 1"
bitfld.long 0x00 21. " L4DPIM1            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM1             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM1            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM1             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN1             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM1            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM1            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM1            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM1             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM1            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM1             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN1             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 1"
hexmask.long.word 0x04 16.--31. 1. " L4DP1              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP1              ,Layer 4 source port number field"
group.long (0x430+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG1,Layer 3 Address 0 Register 1"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG1,Layer 3 Address 1 Register 1"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG1,Layer 3 Address 2 Register 1"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG1,Layer 3 Address 3 Register 1"
group.long 0x460++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL2,Layer 3 And Layer 4 Control Register 2"
bitfld.long 0x00 21. " L4DPIM2            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM2             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM2            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM2             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN2             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM2            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM2            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM2            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM2             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM2            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM2             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN2             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 2"
hexmask.long.word 0x04 16.--31. 1. " L4DP2              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP2              ,Layer 4 source port number field"
group.long (0x460+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG2,Layer 3 Address 0 Register 2"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG2,Layer 3 Address 1 Register 2"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG2,Layer 3 Address 2 Register 2"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG2,Layer 3 Address 3 Register 2"
group.long 0x490++0x07
line.long 0x00 "GMACGRP_L3_L4_CONTROL3,Layer 3 And Layer 4 Control Register 3"
bitfld.long 0x00 21. " L4DPIM3            ,Layer 4 destination port inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 20. "                   L4DPM3             ,Layer 4 destination port match enable" "Disabled,Enabled"
bitfld.long 0x00 19. "                  L4SPIM3            ,Layer 4 source port inverse match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. " L4SPM3             ,Layer 4 source port match enable" "Disabled,Enabled"
bitfld.long 0x00 16. "                   L4PEN3             ,Layer 4 protocol enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "                  L3HDBM3            ,Layer 3 IP DA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
newline
bitfld.long 0x00 6.--10. " L3HSBM3            ,Layer 3 IP SA higher bits match" "None is masked,LSbs [0] is masked,LSbs [1:0] are masked,LSbs [2:0] are masked,LSbs [3:0] are masked,LSbs [4:0] are masked,LSbs [5:0] are masked,LSbs [6:0] are masked,LSbs [7:0] are masked,LSbs [8:0] are masked,LSbs [9:0] are masked,LSbs [10:0] are masked,LSbs [11:0] are masked,LSbs [12:0] are masked,LSbs [13:0] are masked,LSbs [14:0] are masked,LSbs [15:0] are masked,LSbs [16:0] are masked,LSbs [17:0] are masked,LSbs [18:0] are masked,LSbs [19:0] are masked,LSbs [20:0] are masked,LSbs [21:0] are masked,LSbs [22:0] are masked,LSbs [23:0] are masked,LSbs [24:0] are masked,LSbs [25:0] are masked,LSbs [26:0] are masked,LSbs [27:0] are masked,LSbs [28:0] are masked,LSbs [29:0] are masked,All except MSb are masked"
bitfld.long 0x00 5. "  L3DAIM3            ,Layer 3 IP DA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 4. "                  L3DAM3             ,Layer 3 IP DA match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " L3SAIM3            ,Layer 3 IP SA inverse match enable" "Disabled,Enabled"
bitfld.long 0x00 2. "                   L3SAM3             ,Layer 3 IP SA match enable" "Disabled,Enabled"
bitfld.long 0x00 0. "                  L3PEN3             ,Layer 3 protocol enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_LAYER4_ADDRESS0,Layer 4 Address Register 3"
hexmask.long.word 0x04 16.--31. 1. " L4DP3              ,Layer 4 destination port number field"
hexmask.long.word 0x04 0.--15. 1. "                       L4SP3              ,Layer 4 source port number field"
group.long (0x490+0x10)++0x0F
line.long 0x00 "GMACGRP_LAYER3_ADDR0_REG3,Layer 3 Address 0 Register 3"
line.long 0x04 "GMACGRP_LAYER3_ADDR1_REG3,Layer 3 Address 1 Register 3"
line.long 0x08 "GMACGRP_LAYER3_ADDR2_REG3,Layer 3 Address 2 Register 3"
line.long 0x0C "GMACGRP_LAYER3_ADDR3_REG3,Layer 3 Address 3 Register 3"
tree.end
newline
width 40.
group.long 0x500++0x1F
line.long 0x00 "GMACGRP_HASH_TABLE_REG0,Hash Table Register 0"
line.long 0x04 "GMACGRP_HASH_TABLE_REG1,Hash Table Register 1"
line.long 0x08 "GMACGRP_HASH_TABLE_REG2,Hash Table Register 2"
line.long 0x0C "GMACGRP_HASH_TABLE_REG3,Hash Table Register 3"
line.long 0x10 "GMACGRP_HASH_TABLE_REG4,Hash Table Register 4"
line.long 0x14 "GMACGRP_HASH_TABLE_REG5,Hash Table Register 5"
line.long 0x18 "GMACGRP_HASH_TABLE_REG6,Hash Table Register 6"
line.long 0x1C "GMACGRP_HASH_TABLE_REG7,Hash Table Register 7"
group.long 0x584++0x07
line.long 0x00 "GMACGRP_VLAN_INCL_REG,VLAN Tag Inclusion Or Replacement Register"
bitfld.long 0x00 19. " CSVL               ,C-VLAN or S-VLAN" "C-VLAN,S-VLAN"
bitfld.long 0x00 18. "                     VLP                ,VLAN priority control" "0,1"
newline
bitfld.long 0x00 16.--17. " VLC                ,VLAN tag control in transmit frames" "No VLAN tag deletion/insertion/replacement,VLAN tag deletion,VLAN tag insertion,VLAN tag replacement"
hexmask.long.word 0x00 0.--15. 1. "                              VLT                ,VLAN tag for transmit frames"
line.long 0x04 "GMACGRP_VLAN_HASH_TABLE_REG,VLAN Hash Table Register"
hexmask.long.word 0x04 0.--15. 1. " VLHT               ,This field contains the 16-bit VLAN hash table"
group.long 0x700++0x07
line.long 0x00 "GMACGRP_TIMESTAMP_CONTROL,Timestamp Control Register"
bitfld.long 0x00 28. " ATSEN3             ,Auxiliary snapshot 3 enable" "Disabled,Enabled"
bitfld.long 0x00 27. "                   ATSEN2             ,Auxiliary snapshot 2 enable" "Disabled,Enabled"
bitfld.long 0x00 26. "                  ATSEN1             ,Auxiliary snapshot 1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. " ATSEN0             ,Auxiliary snapshot 0 enable" "Disabled,Enabled"
bitfld.long 0x00 24. "                   ATSFC              ,Auxiliary snapshot FIFO clear" "Disabled,Enabled"
bitfld.long 0x00 18. "                  TSENMACADDR        ,Enable MAC address for PTP frame filtering" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--17. " SNAPTYPSEL         ,Select PTP packets for taking snapshots" "0,1,2,3"
bitfld.long 0x00 15. "                          TSMSTRENA          ,Enable snapshot for messages relevant to master" "Slave,Master"
bitfld.long 0x00 14. "                    TSEVNTENA          ,Enable timestamp snapshot for event messages" "Disabled,Enabled"
newline
bitfld.long 0x00 13. " TSIPV4ENA          ,Enable processing of PTP frames sent over IPv4-UDP" "NO_PROCESS_PTP,PROCESS_PTP"
bitfld.long 0x00 12. "             TSIPV6ENA          ,Enable processing of PTP frames sent Over IPv6-UDP" "NO_PROCESS_PTP,PROCESS_PTP"
bitfld.long 0x00 11. "            TSIPENA            ,Enable processing of PTP over ETHERNET frames" "NO_PROCESS_PTP,PROCESS_PTP"
newline
bitfld.long 0x00 10. " TSVER2ENA          ,Enable PTP packet processing for version 2 format" "PTP_1588_VER1,PTP_1588_VER2"
bitfld.long 0x00 9. "              TSCTRLSSR          ,Timestamp digital or binary rollover control" "NOTIMESTAMP_LOW_ROLL_MAX,PTP_1588_VER2"
bitfld.long 0x00 8. "  TSENALL            ,Enable timestamp for all frames" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " TSADDREG           ,Addend reg update" "Not updated,Updated"
bitfld.long 0x00 4. "                TSTRIG             ,Timestamp interrupt trigger enable" "Disabled,Enabled"
bitfld.long 0x00 3. "                  TSUPDT             ,Timestamp update" "Not updated,Updated"
newline
bitfld.long 0x00 2. " TSINIT             ,Timestamp initialize" "Not initialized,Initialized"
bitfld.long 0x00 1. "            TSCFUPDT           ,Timestamp fine or coarse update" "Coarse,Fine"
bitfld.long 0x00 0. "                    TSENA              ,Timestamp enable" "Disabled,Enabled"
line.long 0x04 "GMACGRP_SUB_SECOND_INCREMENT,Sub-Second Increment Register"
hexmask.long.byte 0x04 0.--7. 1. " SSINC              ,The value programmed in this field is accumulated every clock cycle (of clk_ptp_i) with the contents of the sub-second register"
rgroup.long 0x708++0x07
line.long 0x00 "GMACGRP_SYSTEM_TIME_SECONDS,System Time - Seconds Register"
line.long 0x04 "GMACGRP_SYSTEM_TIME_NANOSECONDS,System Time - Nanoseconds Register"
hexmask.long 0x04 0.--30. 1. " TSSS               ,The value in this field has the sub second representation of time with an accuracy of 0.46 ns"
group.long 0x710++0x17
line.long 0x00 "GMACGRP_SYSTEM_TIME_SECONDS_UPDATE,System Time - Seconds Update Register"
line.long 0x04 "GMACGRP_SYSTEM_TIME_NANOSECONDS_UPDATE,System Time - Nanoseconds Update Register"
bitfld.long 0x04 31. " ADDSUB             ,When this bit is set the time value is subtracted with the contents of the update register" "Disabled,Enabled"
hexmask.long 0x04 0.--30. 1. "                   TSSS               ,The value in this field has the sub second representation of time with an accuracy of 0.46 ns"
line.long 0x08 "GMACGRP_TIMESTAMP_ADDEND,Timestamp Addend Register"
line.long 0x0C "GMACGRP_TARGET_TIME_SECONDS,Target Time Seconds Register"
line.long 0x10 "GMACGRP_TARGET_TIME_NANOSECONDS,Target Time Nanoseconds Register"
bitfld.long 0x10 31. " TRGTBUSY           ,The MAC sets this bit when the PPSCMD field in PPS control register is programmed to 010 or 011" "0,1"
hexmask.long 0x10 0.--30. 1. "                          TTSLO              ,This register stores the time in (signed) nanoseconds"
line.long 0x14 "GMACGRP_SYSTEM_TIME_HIGHER_WORD_SECONDS,System Time - Higher Word Seconds Register"
hexmask.long.word 0x14 0.--15. 1. " TSHWR              ,This field contains the most significant 16-bits of the timestamp seconds value"
hgroup.long 0x728++0x03
hide.long 0x00 "GMACGRP_TIMESTAMP_STATUS,Timestamp Status Register"
in
newline
group.long 0x72C++0x03
line.long 0x00 "GMACGRP_PPS_CONTROL,PPS Control Register"
bitfld.long 0x00 5.--6. " TRGTMODSEL0        ,This field indicates the Target Time registers mode for PPS0 output signal" "TRGTINTERONLY,,TRGTINTPPS0,TRGTNOINTER"
bitfld.long 0x00 4. "              PPSEN0             ,When set low bits[3:0] function as PPSCTRL (backward compatible). When set high bits[3:0] function as PPSCMD" "PPSCTRL,PPSCMD"
newline
bitfld.long 0x00 0.--3. " PPSCTRL_PPSCMD     ,PPS0 output frequency control [binary rollover/digital rollover]" ",2Hz/1Hz,4Hz/2Hz,8Hz/4Hz,16Hz/8Hz,32Hz/16Hz,64Hz/32Hz,128Hz/64Hz,256Hz/128Hz,512Hz/256Hz,1024Hz/512Hz,2048Hz/1024Hz,4096Hz/2048Hz,8192Hz/4096Hz,16384Hz/8192Hz,32768Hz/16384Hz"
rgroup.long 0x730++0x07
line.long 0x00 "GMACGRP_AUXILIARY_TIMESTAMP_NANOSECONDS,Auxiliary Timestamp Nanoseconds Register"
hexmask.long 0x00 0.--30. 1. " AUXTSLO            ,Contains the lower 32 bits (nano-seconds field) of the auxiliary timestamp"
line.long 0x04 "GMACGRP_AUXILIARY_TIMESTAMP_SECONDS,Auxiliary Timestamp - Seconds Register"
group.long 0x760++0x07
line.long 0x00 "GMACGRP_PPS0_INTERVAL,PPS0 Interval Register"
line.long 0x04 "GMACGRP_PPS0_WIDTH,PPS0 Width Register"
tree "MAC Address Registers"
group.long 0x800++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS16_HIGH,MAC Address16 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address16 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS16_LOW,MAC Address16 Low Register"
group.long 0x808++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS17_HIGH,MAC Address17 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address17 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS17_LOW,MAC Address17 Low Register"
group.long 0x810++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS18_HIGH,MAC Address18 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address18 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS18_LOW,MAC Address18 Low Register"
group.long 0x818++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS19_HIGH,MAC Address19 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address19 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS19_LOW,MAC Address19 Low Register"
group.long 0x820++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS20_HIGH,MAC Address20 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address20 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS20_LOW,MAC Address20 Low Register"
group.long 0x828++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS21_HIGH,MAC Address21 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address21 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS21_LOW,MAC Address21 Low Register"
group.long 0x830++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS22_HIGH,MAC Address22 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address22 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS22_LOW,MAC Address22 Low Register"
group.long 0x838++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS23_HIGH,MAC Address23 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address23 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS23_LOW,MAC Address23 Low Register"
group.long 0x840++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS24_HIGH,MAC Address24 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address24 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS24_LOW,MAC Address24 Low Register"
group.long 0x848++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS25_HIGH,MAC Address25 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address25 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS25_LOW,MAC Address25 Low Register"
group.long 0x850++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS26_HIGH,MAC Address26 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address26 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS26_LOW,MAC Address26 Low Register"
group.long 0x858++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS27_HIGH,MAC Address27 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address27 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS27_LOW,MAC Address27 Low Register"
group.long 0x860++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS28_HIGH,MAC Address28 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address28 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS28_LOW,MAC Address28 Low Register"
group.long 0x868++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS29_HIGH,MAC Address29 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address29 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS29_LOW,MAC Address29 Low Register"
group.long 0x870++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS30_HIGH,MAC Address30 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address30 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS30_LOW,MAC Address30 Low Register"
group.long 0x878++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS31_HIGH,MAC Address31 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
bitfld.long 0x00 30. "                   SA                 ,Source address" "Disabled,Enabled"
bitfld.long 0x00 29. "                  MBC_5              ,MAC address 47:40 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 28. " MBC_4              ,MAC address 39:32 mask" "Unmasked,Masked"
bitfld.long 0x00 27. "                   MBC_3              ,MAC address 31:24 mask" "Unmasked,Masked"
bitfld.long 0x00 26. "                  MBC_2              ,MAC address 23:16 mask" "Unmasked,Masked"
newline
bitfld.long 0x00 25. " MBC_1              ,MAC address 15:8 mask" "Unmasked,Masked"
bitfld.long 0x00 24. "                   MBC_0              ,MAC address 7:0 mask" "Unmasked,Masked"
hexmask.long.word 0x00 0.--15. 0x01 "                  ADDRHI             ,MAC address31 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS31_LOW,MAC Address31 Low Register"
group.long 0x880++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS32_HIGH,MAC Address32 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address32 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS32_LOW,MAC Address32 Low Register"
group.long 0x888++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS33_HIGH,MAC Address33 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address33 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS33_LOW,MAC Address33 Low Register"
group.long 0x890++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS34_HIGH,MAC Address34 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address34 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS34_LOW,MAC Address34 Low Register"
group.long 0x898++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS35_HIGH,MAC Address35 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address35 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS35_LOW,MAC Address35 Low Register"
group.long 0x8A0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS36_HIGH,MAC Address36 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address36 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS36_LOW,MAC Address36 Low Register"
group.long 0x8A8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS37_HIGH,MAC Address37 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address37 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS37_LOW,MAC Address37 Low Register"
group.long 0x8B0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS38_HIGH,MAC Address38 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address38 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS38_LOW,MAC Address38 Low Register"
group.long 0x8B8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS39_HIGH,MAC Address39 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address39 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS39_LOW,MAC Address39 Low Register"
group.long 0x8C0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS40_HIGH,MAC Address40 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address40 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS40_LOW,MAC Address40 Low Register"
group.long 0x8C8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS41_HIGH,MAC Address41 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address41 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS41_LOW,MAC Address41 Low Register"
group.long 0x8D0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS42_HIGH,MAC Address42 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address42 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS42_LOW,MAC Address42 Low Register"
group.long 0x8D8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS43_HIGH,MAC Address43 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address43 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS43_LOW,MAC Address43 Low Register"
group.long 0x8E0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS44_HIGH,MAC Address44 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address44 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS44_LOW,MAC Address44 Low Register"
group.long 0x8E8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS45_HIGH,MAC Address45 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address45 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS45_LOW,MAC Address45 Low Register"
group.long 0x8F0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS46_HIGH,MAC Address46 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address46 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS46_LOW,MAC Address46 Low Register"
group.long 0x8F8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS47_HIGH,MAC Address47 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address47 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS47_LOW,MAC Address47 Low Register"
group.long 0x900++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS48_HIGH,MAC Address48 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address48 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS48_LOW,MAC Address48 Low Register"
group.long 0x908++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS49_HIGH,MAC Address49 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address49 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS49_LOW,MAC Address49 Low Register"
group.long 0x910++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS50_HIGH,MAC Address50 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address50 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS50_LOW,MAC Address50 Low Register"
group.long 0x918++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS51_HIGH,MAC Address51 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address51 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS51_LOW,MAC Address51 Low Register"
group.long 0x920++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS52_HIGH,MAC Address52 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address52 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS52_LOW,MAC Address52 Low Register"
group.long 0x928++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS53_HIGH,MAC Address53 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address53 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS53_LOW,MAC Address53 Low Register"
group.long 0x930++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS54_HIGH,MAC Address54 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address54 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS54_LOW,MAC Address54 Low Register"
group.long 0x938++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS55_HIGH,MAC Address55 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address55 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS55_LOW,MAC Address55 Low Register"
group.long 0x940++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS56_HIGH,MAC Address56 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address56 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS56_LOW,MAC Address56 Low Register"
group.long 0x948++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS57_HIGH,MAC Address57 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address57 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS57_LOW,MAC Address57 Low Register"
group.long 0x950++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS58_HIGH,MAC Address58 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address58 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS58_LOW,MAC Address58 Low Register"
group.long 0x958++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS59_HIGH,MAC Address59 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address59 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS59_LOW,MAC Address59 Low Register"
group.long 0x960++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS60_HIGH,MAC Address60 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address60 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS60_LOW,MAC Address60 Low Register"
group.long 0x968++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS61_HIGH,MAC Address61 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address61 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS61_LOW,MAC Address61 Low Register"
group.long 0x970++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS62_HIGH,MAC Address62 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address62 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS62_LOW,MAC Address62 Low Register"
group.long 0x978++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS63_HIGH,MAC Address63 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address63 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS63_LOW,MAC Address63 Low Register"
group.long 0x980++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS64_HIGH,MAC Address64 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address64 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS64_LOW,MAC Address64 Low Register"
group.long 0x988++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS65_HIGH,MAC Address65 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address65 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS65_LOW,MAC Address65 Low Register"
group.long 0x990++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS66_HIGH,MAC Address66 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address66 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS66_LOW,MAC Address66 Low Register"
group.long 0x998++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS67_HIGH,MAC Address67 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address67 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS67_LOW,MAC Address67 Low Register"
group.long 0x9A0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS68_HIGH,MAC Address68 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address68 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS68_LOW,MAC Address68 Low Register"
group.long 0x9A8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS69_HIGH,MAC Address69 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address69 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS69_LOW,MAC Address69 Low Register"
group.long 0x9B0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS70_HIGH,MAC Address70 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address70 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS70_LOW,MAC Address70 Low Register"
group.long 0x9B8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS71_HIGH,MAC Address71 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address71 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS71_LOW,MAC Address71 Low Register"
group.long 0x9C0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS72_HIGH,MAC Address72 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address72 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS72_LOW,MAC Address72 Low Register"
group.long 0x9C8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS73_HIGH,MAC Address73 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address73 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS73_LOW,MAC Address73 Low Register"
group.long 0x9D0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS74_HIGH,MAC Address74 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address74 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS74_LOW,MAC Address74 Low Register"
group.long 0x9D8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS75_HIGH,MAC Address75 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address75 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS75_LOW,MAC Address75 Low Register"
group.long 0x9E0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS76_HIGH,MAC Address76 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address76 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS76_LOW,MAC Address76 Low Register"
group.long 0x9E8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS77_HIGH,MAC Address77 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address77 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS77_LOW,MAC Address77 Low Register"
group.long 0x9F0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS78_HIGH,MAC Address78 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address78 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS78_LOW,MAC Address78 Low Register"
group.long 0x9F8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS79_HIGH,MAC Address79 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address79 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS79_LOW,MAC Address79 Low Register"
group.long 0xA00++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS80_HIGH,MAC Address80 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address80 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS80_LOW,MAC Address80 Low Register"
group.long 0xA08++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS81_HIGH,MAC Address81 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address81 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS81_LOW,MAC Address81 Low Register"
group.long 0xA10++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS82_HIGH,MAC Address82 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address82 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS82_LOW,MAC Address82 Low Register"
group.long 0xA18++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS83_HIGH,MAC Address83 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address83 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS83_LOW,MAC Address83 Low Register"
group.long 0xA20++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS84_HIGH,MAC Address84 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address84 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS84_LOW,MAC Address84 Low Register"
group.long 0xA28++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS85_HIGH,MAC Address85 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address85 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS85_LOW,MAC Address85 Low Register"
group.long 0xA30++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS86_HIGH,MAC Address86 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address86 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS86_LOW,MAC Address86 Low Register"
group.long 0xA38++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS87_HIGH,MAC Address87 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address87 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS87_LOW,MAC Address87 Low Register"
group.long 0xA40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS88_HIGH,MAC Address88 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address88 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS88_LOW,MAC Address88 Low Register"
group.long 0xA48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS89_HIGH,MAC Address89 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address89 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS89_LOW,MAC Address89 Low Register"
group.long 0xA50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS90_HIGH,MAC Address90 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address90 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS90_LOW,MAC Address90 Low Register"
group.long 0xA58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS91_HIGH,MAC Address91 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address91 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS91_LOW,MAC Address91 Low Register"
group.long 0xA60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS92_HIGH,MAC Address92 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address92 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS92_LOW,MAC Address92 Low Register"
group.long 0xA68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS93_HIGH,MAC Address93 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address93 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS93_LOW,MAC Address93 Low Register"
group.long 0xA70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS94_HIGH,MAC Address94 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address94 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS94_LOW,MAC Address94 Low Register"
group.long 0xA78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS95_HIGH,MAC Address95 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address95 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS95_LOW,MAC Address95 Low Register"
group.long 0xA80++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS96_HIGH,MAC Address96 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address96 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS96_LOW,MAC Address96 Low Register"
group.long 0xA88++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS97_HIGH,MAC Address97 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address97 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS97_LOW,MAC Address97 Low Register"
group.long 0xA90++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS98_HIGH,MAC Address98 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address98 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS98_LOW,MAC Address98 Low Register"
group.long 0xA98++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS99_HIGH,MAC Address99 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address99 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS99_LOW,MAC Address99 Low Register"
group.long 0xAA0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS100_HIGH,MAC Address100 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address100 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS100_LOW,MAC Address100 Low Register"
group.long 0xAA8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS101_HIGH,MAC Address101 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address101 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS101_LOW,MAC Address101 Low Register"
group.long 0xAB0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS102_HIGH,MAC Address102 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address102 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS102_LOW,MAC Address102 Low Register"
group.long 0xAB8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS103_HIGH,MAC Address103 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address103 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS103_LOW,MAC Address103 Low Register"
group.long 0xAC0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS104_HIGH,MAC Address104 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address104 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS104_LOW,MAC Address104 Low Register"
group.long 0xAC8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS105_HIGH,MAC Address105 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address105 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS105_LOW,MAC Address105 Low Register"
group.long 0xAD0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS106_HIGH,MAC Address106 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address106 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS106_LOW,MAC Address106 Low Register"
group.long 0xAD8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS107_HIGH,MAC Address107 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address107 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS107_LOW,MAC Address107 Low Register"
group.long 0xAE0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS108_HIGH,MAC Address108 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address108 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS108_LOW,MAC Address108 Low Register"
group.long 0xAE8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS109_HIGH,MAC Address109 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address109 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS109_LOW,MAC Address109 Low Register"
group.long 0xAF0++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS110_HIGH,MAC Address110 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address110 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS110_LOW,MAC Address110 Low Register"
group.long 0xAF8++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS111_HIGH,MAC Address111 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address111 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS111_LOW,MAC Address111 Low Register"
group.long 0xB00++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS112_HIGH,MAC Address112 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address112 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS112_LOW,MAC Address112 Low Register"
group.long 0xB08++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS113_HIGH,MAC Address113 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address113 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS113_LOW,MAC Address113 Low Register"
group.long 0xB10++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS114_HIGH,MAC Address114 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address114 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS114_LOW,MAC Address114 Low Register"
group.long 0xB18++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS115_HIGH,MAC Address115 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address115 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS115_LOW,MAC Address115 Low Register"
group.long 0xB20++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS116_HIGH,MAC Address116 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address116 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS116_LOW,MAC Address116 Low Register"
group.long 0xB28++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS117_HIGH,MAC Address117 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address117 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS117_LOW,MAC Address117 Low Register"
group.long 0xB30++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS118_HIGH,MAC Address118 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address118 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS118_LOW,MAC Address118 Low Register"
group.long 0xB38++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS119_HIGH,MAC Address119 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address119 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS119_LOW,MAC Address119 Low Register"
group.long 0xB40++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS120_HIGH,MAC Address120 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address120 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS120_LOW,MAC Address120 Low Register"
group.long 0xB48++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS121_HIGH,MAC Address121 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address121 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS121_LOW,MAC Address121 Low Register"
group.long 0xB50++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS122_HIGH,MAC Address122 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address122 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS122_LOW,MAC Address122 Low Register"
group.long 0xB58++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS123_HIGH,MAC Address123 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address123 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS123_LOW,MAC Address123 Low Register"
group.long 0xB60++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS124_HIGH,MAC Address124 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address124 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS124_LOW,MAC Address124 Low Register"
group.long 0xB68++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS125_HIGH,MAC Address125 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address125 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS125_LOW,MAC Address125 Low Register"
group.long 0xB70++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS126_HIGH,MAC Address126 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address126 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS126_LOW,MAC Address126 Low Register"
group.long 0xB78++0x07
line.long 0x00 "GMACGRP_MAC_ADDRESS127_HIGH,MAC Address127 High Register"
bitfld.long 0x00 31. " AE                 ,Address enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 0x01 "                   ADDRHI             ,MAC address127 [47:32]"
line.long 0x04 "GMACGRP_MAC_ADDRESS127_LOW,MAC Address127 Low Register"
tree.end
newline
group.long 0x1000++0x1F
line.long 0x00 "DMAGRP_BUS_MODE,Bus Mode Register"
bitfld.long 0x00 31. " RIB                ,Rebuild INCRx burst" "0,1"
bitfld.long 0x00 28.--29. "                          PRWG               ,Channel priority weights" "1,2,3,4"
bitfld.long 0x00 27. "                         TXPR               ,Transmit priority" "0,1"
newline
bitfld.long 0x00 26. " MB                 ,Mixed burst" "0,1"
bitfld.long 0x00 25. "                          AAL                ,Address aligned beats" "Disabled,Enabled"
bitfld.long 0x00 24. "                  EIGHTXPBL          ,PBLx8 mode" "Disabled,Enabled"
newline
bitfld.long 0x00 23. " USP                ,Use separate PBL" "Disabled,Enabled"
bitfld.long 0x00 17.--22. "                   RPBL               ,This field indicates the maximum number of beats to be transferred in one RX DMA transaction" ",RXDMAPBL1,RXDMAPBL2,,RXDMAPBL4,,,,RXDMAPBL8,,,,,,,,RXDMAPBL16,,,,,,,,,,,,,,,,RXDMAPBL20,?..."
bitfld.long 0x00 16. "                FB                 ,Fixed burst" "Non FB,FB1_4_8_16"
newline
bitfld.long 0x00 14.--15. " PR                 ,Priority ratio" "1:1,2:1,3:1,4:1"
bitfld.long 0x00 8.--13. "                        PBL                ,Programmable burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 7. "                        ATDS               ,Alternate descriptor size" "Clear RST,Reset"
newline
bitfld.long 0x00 2.--6. " DSL                ,Descriptor skip length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1. "                         DA                 ,DMA arbitration scheme" "Weighted round-robin,Fixed priority"
bitfld.long 0x00 0. "      SWR                ,Software reset" "Clear RST,Reset"
line.long 0x04 "DMAGRP_TRANSMIT_POLL_DEMAND,Transmit Poll Demand Register"
line.long 0x08 "DMAGRP_RECEIVE_POLL_DEMAND,Receive Poll Demand Register"
line.long 0x0C "DMAGRP_RECEIVE_DESCRIPTOR_LIST_ADDRESS,Receive Descriptor List Address Register"
hexmask.long 0x0C 2.--31. 0x04 " RDESLA_32BIT       ,This field contains the base address of the first descriptor in the Receive Descriptor list"
line.long 0x10 "DMAGRP_TRANSMIT_DESCRIPTOR_LIST_ADDRESS,Transmit Descriptor List Address Register"
hexmask.long 0x10 2.--31. 0x04 " TDESLA_32BIT       ,This field contains the base address of the first descriptor in the Transmit Descriptor list"
line.long 0x14 "DMAGRP_STATUS,Status Register"
rbitfld.long 0x14 30. " GLPII              ,GMAC LPI interrupt for channel 0" "No interrupt,Interrupt"
rbitfld.long 0x14 29. "               TTI                ,Timestamp trigger interrupt" "No interrupt,Interrupt"
rbitfld.long 0x14 28. "              GPI                ,GMAC PMT interrupt" "No interrupt,Interrupt"
newline
rbitfld.long 0x14 27. " GMI                ,GMAC MMC interrupt" "No interrupt,Interrupt"
rbitfld.long 0x14 26. "               GLI                ,GMAC line interface interrupt" "No interrupt,Interrupt"
newline
rbitfld.long 0x14 23.--25. " EB                 ,Error bits" "RX DMA write data transfer,,,TX DMA read data transfer,RX DMA descriptor write access,TX DMA descriptor write access,RX DMA descriptor read access,TX DMA descriptor read access"
newline
rbitfld.long 0x14 20.--22. " TS                 ,Transmit process state" "STOPPED,RUNFETCH,RUNWAIT,RUNREAD,TIMESTMP,,SUSPTX,RUNCLOS"
rbitfld.long 0x14 17.--19. "                   RS                 ,Received process state" "STOPPED,RUNFETCH,,RUNWAIT,SUSPEND,RUNCLOSE,TIMESTMP,RUNTRANS"
eventfld.long 0x14 16. "                  NIS                ,Normal interrupt summary" "0,1"
newline
eventfld.long 0x14 15. " AIS                ,Abnormal interrupt summary" "0,1"
bitfld.long 0x14 14. "                          ERI                ,Early receive interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 13. "              FBI                ,Fatal bus error interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x14 10. " ETI                ,Early transmit interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 9. "               RWT                ,Receive watchdog timeout" "Not received,Received"
bitfld.long 0x14 8. "              RPS                ,Receive process stopped" "Not stopped,Stopped"
newline
bitfld.long 0x14 7. " RU                 ,Receive buffer unavailable" "No,Yes"
bitfld.long 0x14 6. "                        RI                 ,Receive interrupt" "No interrupt,Interrupt"
bitfld.long 0x14 5. "              UNF                ,Transmit underflow" "No underflow,Underflow"
newline
bitfld.long 0x14 4. " OVF                ,Receive overflow" "Not overflow,Overflow"
bitfld.long 0x14 3. "               TJT                ,Transmit jabber timeout" "Not transmitted,Transmitted"
bitfld.long 0x14 2. "           TU                 ,Transmit buffer unavailable" "No,Yes"
newline
bitfld.long 0x14 1. " TPS                ,Transmit process stopped" "Not stopped,Stopped"
bitfld.long 0x14 0. "                TI                 ,Transmit interrupt" "No interrupt,Interrupt"
line.long 0x18 "DMAGRP_OPERATION_MODE,Operation Mode Register"
bitfld.long 0x18 26. " DT                 ,Disable dropping of TCP/IP checksum error frames" "Disabled,Enabled"
bitfld.long 0x18 25. "                   RSF                ,Receive store and forward" "Disabled,Enabled"
bitfld.long 0x18 24. "                  DFF                ,Disable flushing of received frames" "Disabled,Enabled"
newline
bitfld.long 0x18 23. " RFA_2              ,MSB of threshold for activating flow control" "Disabled,Enabled"
bitfld.long 0x18 22. "                   RFD_2              ,MSB of threshold for activating flow control" "Disabled,Enabled"
bitfld.long 0x18 21. "                  TSF                ,Transmit store and forward" "Disabled,Enabled"
newline
bitfld.long 0x18 14.--16. " TTC                ,Transmit threshold control" "TTCTHESH64,TTCTHRES128,TTCTHRES192,TTCTHRES256,TTCTHRES40,TTCTHRES32,TTCTHRES24,TTCTHRES16"
bitfld.long 0x18 13. "                ST                 ,Start or stop transmission command" "Disabled,Enabled"
bitfld.long 0x18 11.--12. "                  RFD                ,Threshold for deactivating flow control" "FIFOFULL_1K,FIFOFULL_2K,FIFOFULL_3K,FIFOFULL_4K"
newline
bitfld.long 0x18 9.--10. " RFA                ,Threshold for activating flow control" "FIFOFULL_1K,FIFOFULL_2K,FIFOFULL_3K,FIFOFULL_4K"
bitfld.long 0x18 7. "                FEF                ,Forward error frames" "Disabled,Enabled"
bitfld.long 0x18 6. "                  FUF                ,Forward undersized good frames" "Disabled,Enabled"
newline
bitfld.long 0x18 5. " DGF                ,Drop giant frames" "0,1"
bitfld.long 0x18 3.--4. "                          RTC                ,Receive threshold control" "THRFIFO64,THRFIFO32,THRFIFO96,THRFIFO128"
bitfld.long 0x18 2. "                OSF                ,Operate on second frame" "Disabled,Enabled"
newline
bitfld.long 0x18 1. " SR                 ,Start or stop receive" "Disabled,Enabled"
line.long 0x1C "DMAGRP_INTERRUPT_ENABLE,Interrupt Enable Register"
bitfld.long 0x1C 16. " NIE                ,Normal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x1C 15. "                   AIE                ,Abnormal interrupt summary enable" "Disabled,Enabled"
bitfld.long 0x1C 14. "                  ERE                ,Early receive interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 13. " FBE                ,Fatal bus error enable" "Disabled,Enabled"
bitfld.long 0x1C 10. "                   ETE                ,Early transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 9. "                  RWE                ,Receive watchdog timeout enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 8. " RSE                ,Receive stopped enable" "Disabled,Enabled"
bitfld.long 0x1C 7. "                   RUE                ,Receive buffer unavailable enable" "Disabled,Enabled"
bitfld.long 0x1C 6. "                  RIE                ,Receive interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 5. " UNE                ,Underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 4. "                   OVE                ,Overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x1C 3. "                  TJE                ,Transmit jabber timeout enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 2. " TUE                ,Transmit buffer unavailable enable" "Disabled,Enabled"
bitfld.long 0x1C 1. "                   TSE                ,Transmit stopped enable" "Disabled,Enabled"
bitfld.long 0x1C 0. "                  TIE                ,Transmit interrupt enable" "Disabled,Enabled"
newline
width 48.
rgroup.long 0x1020++0x03
line.long 0x00 "DMAGRP_MISSED_FRAME_AND_BUFFER_OVERFLOW_COUNTER,Missed Frame And Buffer Overflow Counter Register"
bitfld.long 0x00 28. " OVFCNTOVF          ,Overflow bit for FIFO overflow counter" "0,1"
hexmask.long.word 0x00 17.--27. 1. "                          OVFFRMCNT          ,Overflow frame counter"
bitfld.long 0x00 16. "                      MISCNTOVF      ,Overflow bit for missed frame counter" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. " MISFRMCNT          ,Missed frame counter"
group.long 0x1024++0x07
line.long 0x00 "DMAGRP_RECEIVE_INTERRUPT_WATCHDOG_TIMER,Receive Interrupt Watchdog Timer Register"
hexmask.long.byte 0x00 0.--7. 1. " RIWT               ,RI watchdog timer count"
line.long 0x04 "DMAGRP_AXI_BUS_MODE,AXI Bus Mode Register"
bitfld.long 0x04 31. " EN_LPI             ,LPI mode enable" "Disabled,Enabled"
newline
bitfld.long 0x04 30. " LPI_XIT_FRM        ,GMAC-AXI come out of the LPI mode circumstances" "Any frame is received,Magic Packet or Remote Wake Up Packet is received"
newline
bitfld.long 0x04 20.--23. " WR_OSR_LMT         ,AXI maximum write outstanding request limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x04 16.--19. " RD_OSR_LMT         ,AXI maximum write outstanding request limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 13. "                         ONEKBBE            ,1KB boundary crossing enable for the GMAC-AXI master" "FOUR_K_BOUNDARY,ONE_K_BOUNDARY"
rbitfld.long 0x04 12. "           AXI_AAL        ,Reflects the Bit 25(AAL) Bus Mode Register" "0,1"
newline
bitfld.long 0x04 3. " BLEN16             ,GMAC-AXI is allowed to select a burst length of 16 on the AXI Master interface" "Disabled,Enabled"
bitfld.long 0x04 2. "                   BLEN8              ,GMAC-AXI is allowed to select a burst length of 8 on the AXI Master interface" "Disabled,Enabled"
bitfld.long 0x04 1. "                  BLEN4          ,GMAC-AXI is allowed to select a burst length of 4 on the AXI Master interface" "Disabled,Enabled"
newline
rbitfld.long 0x04 0. " UNDEFINED          ,Indicates the complement (invert) value of Bit 16 (FB) in Register 0 (Bus Mode Register[16])" "Disabled,Enabled"
rgroup.long 0x102C++0x03
line.long 0x00 "DMAGRP_AHB_OR_AXI_STATUS,AHB Or AXI Status Register"
bitfld.long 0x00 1. " AXIRDSTS           ,AXI master read channel status" "Low,High"
bitfld.long 0x00 0. "                       AXWHSTS            ,AXI master write channel or AHB master status" "Low,High"
rgroup.long 0x1048++0x13
line.long 0x00 "DMAGRP_CURRENT_HOST_TRANSMIT_DESCRIPTOR,Current Host Transmit Descriptor Register"
line.long 0x04 "DMAGRP_CURRENT_HOST_RECEIVE_DESCRIPTOR,Current Host Receive Descriptor Register"
line.long 0x08 "DMAGRP_CURRENT_HOST_TRANSMIT_BUFFER_ADDRESS,Current Host Transmit Buffer Address Register"
line.long 0x0C "DMAGRP_CURRENT_HOST_RECEIVE_BUFFER_ADDRESS,Current Host Receive Buffer Address Register"
line.long 0x10 "DMAGRP_HW_FEATURE,HW Feature Register"
bitfld.long 0x10 28.--30. " ACTPHYIF           ,Active or Selected PHY interface" "GMIIMII0,RGMII1,SGMII2,TBI3,RMII4,RTBI5,SMII6,REVMII7"
bitfld.long 0x10 27. "                   SAVLANINS          ,Source address or VLAN insertion" "0,1"
bitfld.long 0x10 26. "                         FLEXIPPSEN     ,Flexible pulse-per-second output" "0,1"
newline
bitfld.long 0x10 25. " INTTSEN            ,Timestamping with internal system time" "0,1"
bitfld.long 0x10 24. "                          ENHDESSEL          ,Alternate (enhanced descriptor)" "Disabled,Enabled"
bitfld.long 0x10 22.--23. "                  TXCHCNT        ,Number of additional TX channel" "0,1,2,3"
newline
bitfld.long 0x10 20.--21. " RXCHCNT            ,Number of additional RX channel" "0,1,2,3"
bitfld.long 0x10 19. "                          RXFIFOSIZE         ,RX FIFO > 2048 Bytes" "Disabled,Enabled"
bitfld.long 0x10 18. "                  RXTYP2COE      ,IP checksum offload (type 2) in RX" "Disabled,Enabled"
newline
bitfld.long 0x10 17. " RXTYP1COE          ,IP checksum offload (type 1) in RX" "Disabled,Enabled"
bitfld.long 0x10 16. "                   TXOESEL            ,Checksum offload in TX" "Disabled,Enabled"
bitfld.long 0x10 15. "                  AVSEL          ,AV feature" "Disabled,Enabled"
newline
bitfld.long 0x10 14. " EEESEL             ,Energy efficient ETHERNET" "Disabled,Enabled"
bitfld.long 0x10 13. "                   TSVER2SEL          ,IEEE 1588-2008 advanced timestamp" "Disabled,Enabled"
bitfld.long 0x10 12. "                  TSVER1SEL      ,Only IEEE 1588-2002 timestamp" "Disabled,Enabled"
newline
bitfld.long 0x10 11. " MMCSEL             ,RMON module" "Disabled,Enabled"
bitfld.long 0x10 10. "                   MGKSEL             ,PMT magic packet" "Disabled,Enabled"
bitfld.long 0x10 9. "                  RWKSEL         ,PMT remote wakeup" "Disabled,Enabled"
newline
bitfld.long 0x10 8. " SMASEL             ,SMA (MDIO) interface" "Disabled,Enabled"
bitfld.long 0x10 7. "                   L3L4FLTREN         ,Layer 3 and layer 4 filter feature" "0,1"
bitfld.long 0x10 6. "                         PCSSEL         ,PCS registers (TBI/SGMII/RTBI PHY interface)" "Disabled,Enabled"
newline
bitfld.long 0x10 5. " ADDMACADRSEL       ,Multiple MAC address registers" "Disabled,Enabled"
bitfld.long 0x10 4. "                   HASHSEL            ,HASH filter" "Disabled,Enabled"
bitfld.long 0x10 3. "                  EXTHASHEN      ,Expanded DA hash filter" "0,1"
newline
bitfld.long 0x10 2. " HDSEL              ,Half-Duplex support" "Disabled,Enabled"
bitfld.long 0x10 1. "                   GMIISEL            ,1000 Mbps support" "Disabled,Enabled"
bitfld.long 0x10 0. "                  MIISEL         ,10 or 100 Mbps support" "Disabled,Enabled"
group.long 0xDC++0x07
line.long 0x00 "GMACGRP_WDOG_TIMEOUT,Watchdog Timeout Register"
bitfld.long 0x00 16. " PWE                ,Programmable watchdog enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--13. 1. "                   WTO                ,Watchdog timeout"
line.long 0x04 "GMACGRP_GENPIO,General Purpose IO Register"
bitfld.long 0x04 24. " GPIT               ,GPI type" "Latched-low,Latched-high"
bitfld.long 0x04 16. "               GPIE               ,GPI interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 8. " GPO                ,General purpose output" "Drives not directly to GPO_O output ports,Drives directly to GPO_O output ports"
rbitfld.long 0x04 0. "                               GPIS           ,General purpose input status" "0,1"
width 0x0B
tree.end
tree.end
tree.open "USB (Universal Serial Bus)"
tree "USBOTG 0"
base ad:0xFFB00000
width 15.
if (((per.l(ad:0xFFB00000))&0x200000)==0x00)
group.long 0x00++0x07
line.long 0x00 "GOTGCTL,OTG Control And Status Register"
rbitfld.long 0x00 21. " CURMOD           ,Current mode of operation" "Device,Host"
bitfld.long 0x00 20. "        OTGVER         ,OTG version" "1.3,2.0"
rbitfld.long 0x00 19. "               BSESVLD          ,B-session valid" "Not valid,Valid"
rbitfld.long 0x00 16. "         CONIDSTS             ,Connector ID status" "A-device,B-device"
newline
bitfld.long 0x00 12. " EHEN             ,Embedded host enable" "Disabled,Enabled"
bitfld.long 0x00 11. "      DEVHNPEN       ,Device HNP enable" "Disabled,Enabled"
bitfld.long 0x00 9. "          HNPREQ           ,HNP request" "Not requested,Requested"
rbitfld.long 0x00 8. "     HSTNEGSCS            ,Host negotiation success" "Failed,Succeed"
newline
bitfld.long 0x00 7. " BVALIDOVVAL      ,B-peripheral session valid override value" "0,1"
bitfld.long 0x00 6. "             BVALIDOVEN     ,B-peripheral session valid override enable" "Disabled,Enabled"
bitfld.long 0x00 5. "          AVALIDOVVAL      ,A-peripheral session valid override value" "0,1"
bitfld.long 0x00 4. "                 AVALIDOVEN           ,A-peripheral session valid override enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " VBVALIDOVVAL     ,VBUS valid override value" "0,1"
bitfld.long 0x00 2. "             VBVALIDOVEN    ,VBUS valid override enable" "Disabled,Enabled"
bitfld.long 0x00 1. "          SESREQ           ,Session request" "Not requested,Requested"
rbitfld.long 0x00 0. "     SESREQSCS            ,Session request success" "Failed,Succeeded"
line.long 0x04 "GOTGINT,OTG Interrupt Register"
eventfld.long 0x04 18. " ADEVTOUTCHG      ,A-device timeout change" "No timeout,Timeout"
eventfld.long 0x04 17. "    HSTNEGDET      ,Host negotiation detection" "Not detected,Detected"
eventfld.long 0x04 9. "      HSTNEGSUCSTSCHNG ,Host negotiation success status change" "Not changed,Changed"
eventfld.long 0x04 8. "       SESREQSUCSTSCHNG     ,Session request success status change" "Not changed,Changed"
newline
eventfld.long 0x04 2. " SESENDDET        ,Session end detection" "Not detected,Detected"
if (((per.l(ad:0xFFB00000+0x08))&0x200000)==0x200000)
group.long 0x08++0x03
line.long 0x00 "GAHBCFG,AHC Configuration Register"
bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert descriptor endianness" "Same,Opposite"
bitfld.long 0x00 23. "      AHBSINGLE      ,AHB single support" "INCR,Single"
bitfld.long 0x00 22. "            NOTIALLDMAWAIT   ,Notify all DMA write transaction" "Last,All"
newline
bitfld.long 0x00 21. " REMMEMSUPP       ,Remote memory support" "Disabled,Enabled"
newline
bitfld.long 0x00 7. " NPTXFEMPLVL      ,Non-periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 5. "    DMAEN          ,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 1.--4. "          HBSTLEN          ,Burst length/type" "1 word/Single,4 words/INCR,8 words/-,16 words/INCR4,32 words/-,64 words/INCR8,128 words/-,256 words/INCR16,?..."
bitfld.long 0x00 0. "  GLBLINTRMSK          ,Global interrupt mask" "Masked,Not masked"
newline
else
group.long 0x08++0x03
line.long 0x00 "GAHBCFG,AHC Configuration Register"
bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert descriptor endianness" "Same,Opposite"
bitfld.long 0x00 23. "      AHBSINGLE      ,AHB single support" "INCR,Single"
newline
bitfld.long 0x00 21. " REMMEMSUPP       ,Remote memory support" "Disabled,Enabled"
newline
bitfld.long 0x00 7. " NPTXFEMPLVL      ,Non-periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 5. "    DMAEN          ,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 1.--4. "          HBSTLEN          ,Burst length/type" "1 word/Single,4 words/INCR,8 words/-,16 words/INCR4,32 words/-,64 words/INCR8,128 words/-,256 words/INCR16,?..."
bitfld.long 0x00 0. "  GLBLINTRMSK          ,Global interrupt mask" "Masked,Not masked"
newline
endif
group.long 0x0C++0x0F
line.long 0x00 "GUSBCFG,USB Configuration Register"
bitfld.long 0x00 31. " CORRUPTTXPKT     ,Corrupt TX packet" "Normal,Debug"
bitfld.long 0x00 30. "        FORCEDEVMODE   ,Force device mode" "Normal,Force device"
bitfld.long 0x00 29. "      FORCEHSTMODE     ,Force host mode" "Normal,Force host"
bitfld.long 0x00 28. "        TXENDDELAY           ,TX end delay" "Normal,TX end"
newline
rbitfld.long 0x00 26. " IC_USBCAP        ,IC_USB-capable" "Not selected,Selected"
bitfld.long 0x00 22. "  TERMSELDLPULSE ,TermSel DLine pulsing selection" "Utmi_txvalid,Utmi_termsel"
bitfld.long 0x00 19. "      ULPICLKSUSM      ,ULPI clock suspendM" "Powered down,Powered up"
bitfld.long 0x00 18. "      ULPIAUTORES          ,ULPI auto resume enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10.--13. " USBTRDTIM        ,USB turnaround time in PHY clocks" ",,,,,16-bit,,,,8-bit,?..."
bitfld.long 0x00 9. "        HNPCAP         ,HNP-capable" "Disabled,Enabled"
bitfld.long 0x00 8. "          SRPCAP           ,SRP-capable" "Disabled,Enabled"
bitfld.long 0x00 7. "          DDRSEL               ,ULPI DDR select" "Single,Double"
newline
bitfld.long 0x00 6. " PHYSEL           ,Transceiver select" "2.0,1.1"
rbitfld.long 0x00 5. "           FSINTF         ,Full-speed serial interface select" "6-pin,3-pin"
rbitfld.long 0x00 4. "             ULPI_UTMI_SEL    ,ULPI or UTMI+ select" "UTMI+,ULPI"
rbitfld.long 0x00 3. "             PHYIF                ,PHY interface" "8bit,16bit"
newline
bitfld.long 0x00 0.--2. " TOUTCAL          ,HS/FS timeout calibration" "0,1,2,3,4,5,6,7"
newline
line.long 0x04 "GRSTCTL,Reset Register"
rbitfld.long 0x04 31. " AHBIDLE     ,AHB master idle" "Not idle,Idle"
rbitfld.long 0x04 30. "     DMAREQ  ,DMA request signal" "Not requested,Requested"
bitfld.long 0x04 6.--10. "  TXFNUM      ,TXFIFO number" "Non-periodic TXFIFO,Periodic TXFIFO,Periodic TXFIFO 2,Periodic TXFIFO 3,Periodic TXFIFO 4,Periodic TXFIFO 5,Periodic TXFIFO 6,Periodic TXFIFO 7,Periodic TXFIFO 8,Periodic TXFIFO 9,Periodic TXFIFO 10,Periodic TXFIFO 11,Periodic TXFIFO 12,Periodic TXFIFO 13,Periodic TXFIXO 14,Periodic TXFIFO 15,Flush all,?..."
newline
bitfld.long 0x04 5. " TXFFLSH     ,TXFIFO flush" "Not flushed,Flushed"
bitfld.long 0x04 4. "  RXFFLSH ,RXFIFO flush" "Not flushed,Flushed"
bitfld.long 0x04 1. "    PIUFSSFTRST ,PIU FS dedicated controller soft reset" "No reset,Reset"
newline
bitfld.long 0x04 0. " CSFTRST     ,Core soft reset" "No reset,Reset"
newline
line.long 0x08 "GINTSTS,Interrupt Register"
bitfld.long 0x08 31. " WKUPINT       ,Resume/remote wakeup detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 30. "   SESSREQINT    ,Session request/new session detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 28. "   CONIDSTSCHNG  ,Connector ID status change" "Not changed,Changed"
bitfld.long 0x08 23. "    RESETDET        ,Reset detected interrupt" "No reset,Reset"
newline
bitfld.long 0x08 22. " FETSUSP       ,Data fetch suspended" "Not suspended,Suspended"
bitfld.long 0x08 21. "  INCOMPLP      ,Incomplete periodic transfer" "Not active,Incomplete"
bitfld.long 0x08 20. "     INCOMPISOIN   ,Incomplete isochronous IN transfer" "Not active,Incomplete"
rbitfld.long 0x08 19. "     OEPINT          ,OUT endpoint interrupt" "No interrupt,Interrupt"
newline
rbitfld.long 0x08 18. " IEPINT        ,IN endpoint interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 17. "   EPMIS         ,Endpoint mismatch interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 15. "   EOFF          ,End of periodic frame interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 14. "   ISOOUTDROP      ,Isochronous OUT packet dropped interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x08 13. " ENUMDONE      ,Enumeration done" "Not done,Done"
bitfld.long 0x08 12. "       USBRST        ,USB reset" "No reset,Reset"
bitfld.long 0x08 11. "       USBSUSP       ,USB suspend" "Not suspended,Suspended"
bitfld.long 0x08 10. "  ERLYSUSP        ,Early suspend" "Not suspended,Suspended"
newline
rbitfld.long 0x08 7. " GOUTNAKEFF    ,Global OUT NAK effective" "Not effective,Effective"
rbitfld.long 0x08 6. "  GINNAKEFF     ,Global IN non-periodic NAK effective" "Not effective,Effective"
rbitfld.long 0x08 5. "  NPTXFEMP      ,Non-periodic TXFIFO empty" "Not empty,Empty"
rbitfld.long 0x08 4. "      TXFLVL          ,RXFIFO non-empty" "Empty,Not empty"
newline
bitfld.long 0x08 3. " SOF           ,Start of frame" "Not started,Started"
rbitfld.long 0x08 2. "    OTGINT        ,OTG interrupt" "No interrupt,Interrupt"
eventfld.long 0x08 1. "   MODEMIS       ,Mode mismatch interrupt" "No interrupt,Interrupt"
rbitfld.long 0x08 0. "   CURMOD          ,Current mode of operation" "Device,Host"
line.long 0x0C "GINTMSK,Interrupt Mask Register"
bitfld.long 0x0C 31. " WKUPINTMSK    ,Resume/remote wakeup detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 30. "     SESSREQINTMSK ,Session request/new session detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 29. "     DISCONNINTMSK ,Disconnect detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 28. "     CONIDSTSCHNGMSK ,Connector ID status change mask" "Masked,Not masked"
newline
bitfld.long 0x0C 23. " RESETDETMSK   ,Reset detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 22. "     FETSUSPMSK    ,Data fetch suspended mask" "Masked,Not masked"
bitfld.long 0x0C 21. "     INCOMPLPMSK   ,Incomplete isochronous OUT transfer interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 20. "     INCOMPISOINMSK  ,Incomplete isochronous IN transfer mask" "Masked,Not masked"
newline
bitfld.long 0x0C 19. " OEPINTMSK     ,OUT endpoints interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 18. "     IEPINTMSK     ,IN endpoints interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 17. "     EPMISMSK      ,Endpoint mismatch interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 15. "     EOPFMSK         ,End of periodic frame interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x0C 14. " ISOOUTDROPMSK ,Isochronous OUT packet dropped interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 13. "     ENUMDONEMSK   ,Enumeration done mask" "Masked,Not masked"
bitfld.long 0x0C 12. "     USBRSTMSK     ,USB reset mask" "Masked,Not masked"
bitfld.long 0x0C 11. "     USBSUSPMSK      ,USB suspend mask" "Masked,Not masked"
newline
bitfld.long 0x0C 10. " ERLYSUSPMSK   ,Early suspend mask" "Masked,Not masked"
bitfld.long 0x0C 7. "     GOUTNAKEFFMSK ,Global OUT NAK effective mask" "Masked,Not masked"
bitfld.long 0x0C 6. "     GINNAKEFFMSK  ,Global non-periodic IN NAK effective mask" "Masked,Not masked"
bitfld.long 0x0C 5. "     NPTXFEMPMSK     ,Non-periodic TXFIFO empty mask" "Masked,Not masked"
newline
bitfld.long 0x0C 4. " RXFLVLMSK     ,Receive FIFO non-empty mask" "Masked,Not masked"
bitfld.long 0x0C 3. "     SOFMSK        ,Start of frame mask" "Masked,Not masked"
bitfld.long 0x0C 2. "     OTGINTMSK     ,OTG interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 1. "     MODEMISMSK      ,Mode mismatch interrupt mask" "Masked,Not masked"
newline
rgroup.long 0x1C++0x07
line.long 0x00 "GRXSTSR,Receive Status Debug Read Register"
bitfld.long 0x00 21.--24. " FN              ,Frame number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 17.--20. "                               PKTSTS         ,Packet status" ",Global OUT NAK,OUT data packet received,OUT transfer completed,SETUP transaction completed,,SETUP data packet received,?..."
bitfld.long 0x00 15.--16. "  DPID                ,Data PID" "DATA0,DATA2,DATA1,MDATA"
newline
hexmask.long.word 0x00 4.--14. 1. " BCNT            ,Byte count"
bitfld.long 0x00 0.--3. "                             EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "GRXSTSP,Receive Status Read/Pop Register"
bitfld.long 0x04 21.--24. " FN              ,Frame number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 17.--20. "                               PKTSTS         ,Packet status" ",Global OUT NAK,OUT data packet received,OUT transfer completed,SETUP transaction completed,,SETUP data packet received,?..."
bitfld.long 0x04 15.--16. "  DPID                ,Data PID" "DATA0,DATA1,DATA2,MDATA"
newline
hexmask.long.word 0x04 4.--14. 1. " BCNT            ,Byte count"
bitfld.long 0x04 0.--3. "                             EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
group.long 0x00++0x03
line.long 0x00 "GOTGCTL,OTG Control And Status Register"
rbitfld.long 0x00 21. " CURMOD           ,Current mode of operation" "Device,Host"
bitfld.long 0x00 20. "        OTGVER         ,OTG version" "1.3,2.0"
rbitfld.long 0x00 18. "               ASESVLD          ,A-session valid" "Not valid,Valid"
rbitfld.long 0x00 17. "         DBNCTIME             ,Long/short debounce time" "Long,Short"
newline
rbitfld.long 0x00 16. " CONIDSTS         ,Connector ID status" "A-device,B-device"
bitfld.long 0x00 12. "      EHEN           ,Embedded host enable" "Disabled,Enabled"
bitfld.long 0x00 10. "          HSTSETHNPEN      ,Host set HNP enable" "Disabled,Enabled"
rbitfld.long 0x00 8. "          HSTNEGSCS            ,Host negotiation success" "Failed,Succeed"
newline
bitfld.long 0x00 7. " BVALIDOVVAL      ,B-peripheral session valid override value" "0,1"
bitfld.long 0x00 6. "             BVALIDOVEN     ,B-peripheral session valid override enable" "Disabled,Enabled"
bitfld.long 0x00 5. "          AVALIDOVVAL      ,A-peripheral session valid override value" "0,1"
bitfld.long 0x00 4. "                 AVALIDOVEN           ,A-peripheral session valid override enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " VBVALIDOVVAL     ,VBUS valid override value" "0,1"
bitfld.long 0x00 2. "             VBVALIDOVEN    ,VBUS valid override enable" "Disabled,Enabled"
if (((per.l(ad:0xFFB00000+0x0C))&0x300)!=0x00)
group.long 0x04++0x03
line.long 0x00 "GOTGINT,OTG Interrupt Register"
eventfld.long 0x00 19. " DBNCEDONE        ,Debounce done" "Not done,Done"
eventfld.long 0x00 18. "      ADEVTOUTCHG    ,A-device timeout change" "No timeout,Timeout"
eventfld.long 0x00 17. "        HSTNEGDET        ,Host negotiation detection" "Not detected,Detected"
eventfld.long 0x00 9. "      HSTNEGSUCSTSCHNG     ,Host negotiation success status change" "Not changed,Changed"
newline
eventfld.long 0x00 8. " SESREQSUCSTSCHNG ,Session request success status change" "Not changed,Changed"
eventfld.long 0x00 2. "   SESENDDET      ,Session end detection" "Not detected,Detected"
else
group.long 0x04++0x03
line.long 0x00 "GOTGINT,OTG Interrupt Register"
eventfld.long 0x00 18. " ADEVTOUTCHG      ,A-device timeout change" "No timeout,Timeout"
eventfld.long 0x00 17. "    HSTNEGDET      ,Host negotiation detection" "Not detected,Detected"
eventfld.long 0x00 9. "      HSTNEGSUCSTSCHNG ,Host negotiation success status change" "Not changed,Changed"
eventfld.long 0x00 8. "       SESREQSUCSTSCHNG     ,Session request success status change" "Not changed,Changed"
newline
eventfld.long 0x00 2. " SESENDDET        ,Session end detection" "Not detected,Detected"
endif
if (((per.l(ad:0xFFB00000+0x08))&0x200000)==0x200000)
group.long 0x08++0x03
line.long 0x00 "GAHBCFG,AHC Configuration Register"
bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert descriptor endianness" "Same,Opposite"
bitfld.long 0x00 23. "      AHBSINGLE      ,AHB single support" "INCR,Single"
bitfld.long 0x00 22. "            NOTIALLDMAWAIT   ,Notify all DMA write transaction" "Last,All"
newline
bitfld.long 0x00 21. " REMMEMSUPP       ,Remote memory support" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " PTXFEMPLVL       ,Periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 7. "    NPTXFEMPLVL    ,Non-periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 5. "        DMAEN            ,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 1.--4. "          HBSTLEN              ,Burst length/type" "1 word/Single,4 words/INCR,8 words/-,16 words/INCR4,32 words/-,64 words/INCR8,128 words/-,256 words/INCR16,?..."
newline
bitfld.long 0x00 0. " GLBLINTRMSK      ,Global interrupt mask" "Masked,Not masked"
else
group.long 0x08++0x03
line.long 0x00 "GAHBCFG,AHC Configuration Register"
bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert descriptor endianness" "Same,Opposite"
bitfld.long 0x00 23. "      AHBSINGLE      ,AHB single support" "INCR,Single"
newline
bitfld.long 0x00 21. " REMMEMSUPP       ,Remote memory support" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " PTXFEMPLVL       ,Periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 7. "    NPTXFEMPLVL    ,Non-periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 5. "        DMAEN            ,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 1.--4. "          HBSTLEN              ,Burst length/type" "1 word/Single,4 words/INCR,8 words/-,16 words/INCR4,32 words/-,64 words/INCR8,128 words/-,256 words/INCR16,?..."
newline
bitfld.long 0x00 0. " GLBLINTRMSK      ,Global interrupt mask" "Masked,Not masked"
endif
group.long 0x0C++0x0F
line.long 0x00 "GUSBCFG,USB Configuration Register"
bitfld.long 0x00 31. " CORRUPTTXPKT     ,Corrupt TX packet" "Normal,Debug"
bitfld.long 0x00 30. "        FORCEDEVMODE   ,Force device mode" "Normal,Force device"
bitfld.long 0x00 29. "      FORCEHSTMODE     ,Force host mode" "Normal,Force host"
rbitfld.long 0x00 26. "        IC_USBCAP            ,IC_USB-capable" "Not selected,Selected"
newline
bitfld.long 0x00 25. " ULPI             ,ULPI interface protect disable" "No,Yes"
bitfld.long 0x00 24. "           INDICATOR      ,Indicator pass through" "Qualified,Not qualified"
bitfld.long 0x00 23. "     COMPLEMENT       ,Indicator complement" "Not inverted,Inverted"
bitfld.long 0x00 21. "      ULPIEXTVBUSINDICATOR ,ULPI external VBUS indicator" "Internal,External"
newline
bitfld.long 0x00 20. " ULPIEXTVBUSDRV   ,ULPI external VBUS drive" "Internal,External"
bitfld.long 0x00 19. "      ULPICLKSUSM    ,ULPI clock suspendM" "Powered down,Powered up"
bitfld.long 0x00 18. "      ULPIAUTORES      ,ULPI auto resume enable" "Disabled,Enabled"
bitfld.long 0x00 9. "          HNPCAP               ,HNP-capable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " SRPCAP           ,SRP-capable" "Disabled,Enabled"
bitfld.long 0x00 7. "      DDRSEL         ,ULPI DDR select" "Single,Double"
bitfld.long 0x00 6. "            PHYSEL           ,Transceiver select" "2.0,1.1"
rbitfld.long 0x00 5. "               FSINTF               ,Full-speed serial interface select" "6-pin,3-pin"
newline
rbitfld.long 0x00 4. " ULPI_UTMI_SEL    ,ULPI or UTMI+ select" "UTMI+,ULPI"
rbitfld.long 0x00 3. "         PHYIF          ,PHY interface" "8bit,16bit"
bitfld.long 0x00 0.--2. "             TOUTCAL          ,HS/FS timeout calibration" "0,1,2,3,4,5,6,7"
newline
line.long 0x04 "GRSTCTL,Reset Register"
rbitfld.long 0x04 31. " AHBIDLE     ,AHB master idle" "Not idle,Idle"
rbitfld.long 0x04 30. "     DMAREQ  ,DMA request signal" "Not requested,Requested"
bitfld.long 0x04 6.--10. "  TXFNUM      ,TXFIFO number" "Non-periodic TXFIFO,Periodic TXFIFO,,,,,,,,,,,,,,,Flush all,?..."
newline
bitfld.long 0x04 5. " TXFFLSH     ,TXFIFO flush" "Not flushed,Flushed"
bitfld.long 0x04 4. "  RXFFLSH ,RXFIFO flush" "Not flushed,Flushed"
bitfld.long 0x04 2. "    FRMCNTRRST  ,Host frame counter reset" "No reset,Reset"
newline
bitfld.long 0x04 1. " PIUFSSFTRST ,PIU FS dedicated controller soft reset" "No reset,Reset"
bitfld.long 0x04 0. "     CSFTRST ,Core soft reset" "No reset,Reset"
newline
line.long 0x08 "GINTSTS,Interrupt Register"
bitfld.long 0x08 31. " WKUPINT      ,Resume/remote wakeup detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 30. "  SESSREQINT    ,Session request/new session detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 29. "  DISCONNINT    ,Disconnect detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 28. "  CONIDSTSCHNG    ,Connector ID status change" "Not changed,Changed"
newline
rbitfld.long 0x08 26. " PTXFEMP      ,Periodic TXFIFO empty" "Not empty,Empty"
rbitfld.long 0x08 25. "     HCHINT        ,Host channels interrupt" "No interrupt,Interrupt"
rbitfld.long 0x08 24. "  PRTINT        ,Host port interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 21. "  INCOMPLP        ,Incomplete periodic transfer" "Not active,Incomplete"
newline
rbitfld.long 0x08 5. " NPTXFEMP     ,Non-periodic TXFIFO empty" "Not empty,Empty"
rbitfld.long 0x08 4. "     TXFLVL        ,RXFIFO non-empty" "Empty,Not empty"
bitfld.long 0x08 3. "     SOF           ,Start of frame" "Not started,Started"
rbitfld.long 0x08 2. "   OTGINT          ,OTG interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x08 1. " MODEMIS      ,Mode mismatch interrupt" "No interrupt,Interrupt"
rbitfld.long 0x08 0. "  CURMOD        ,Current mode of operation" "Device,Host"
newline
newline
line.long 0x0C "GINTMSK,Interrupt Mask Register"
bitfld.long 0x0C 31. " WKUPINTMSK   ,Resume/remote wakeup detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 30. "    SESSREQINTMSK ,Session request/new session detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 29. "    DISCONNINTMSK ,Disconnect detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 28. "    CONIDSTSCHNGMSK ,Connector ID status change mask" "Masked,Not masked"
newline
bitfld.long 0x0C 26. " PTXFEMPMSK   ,Periodic TXFIFO empty mask" "Masked,Not masked"
bitfld.long 0x0C 25. "    HCHINTMSK     ,Host channels interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 24. "    PRTINTMSK     ,Host port interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 21. "    INCOMPLPMSK     ,Incomplete periodic transfer mask" "Masked,Not masked"
newline
bitfld.long 0x0C 6. " GINNAKEFFMSK ,Global non-periodic IN NAK effective mask" "Masked,Not masked"
bitfld.long 0x0C 5. "    NPTXFEMPMSK   ,Non-periodic TXFIFO empty mask" "Masked,Not masked"
bitfld.long 0x0C 4. "    RXFLVLMSK     ,Receive FIFO non-empty mask" "Masked,Not masked"
bitfld.long 0x0C 3. "    SOFMSK          ,Start of frame mask" "Masked,Not masked"
newline
bitfld.long 0x0C 2. " OTGINTMSK    ,OTG interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 1. "    MODEMISMSK    ,Mode mismatch interrupt mask" "Masked,Not masked"
newline
newline
newline
rgroup.long 0x1C++0x07
line.long 0x00 "GRXSTSR,Receive Status Debug Read Register"
bitfld.long 0x00 17.--20. " PKTSTS          ,Packet status" ",,IN data packet received,IN transfer completed,,Data toggle error,,Channel halted,?..."
bitfld.long 0x00 15.--16. "          DPID           ,Data PID" "DATA0,DATA2,DATA1,MDATA"
hexmask.long.word 0x00 4.--14. 1. "                        BCNT                ,Byte count"
newline
bitfld.long 0x00 0.--3. " CHNUM           ,Channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "GRXSTSP,Receive Status Read/Pop Register"
bitfld.long 0x04 17.--20. " PKTSTS          ,Packet status" ",,IN data packet received,IN transfer completed,,Data toggle error,,Channel halted,?..."
bitfld.long 0x04 15.--16. "          DPID           ,Data PID" "DATA0,DATA1,DATA2,MDATA"
hexmask.long.word 0x04 4.--14. 1. "                        BCNT                ,Byte count"
newline
bitfld.long 0x04 0.--3. " CHNUM           ,Channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
group.long 0x24++0x03
line.long 0x00 "GRXFSIZ,Receive FIFO Size Register"
hexmask.long.word 0x00 0.--13. 1. " RXFDEP          ,RXFIFO depth"
if (((per.l(ad:0xFFB00000))&0x200000)==0x00)
group.long 0x28++0x03
line.long 0x00 "GNPTXFSIZ,Non-Periodic Transmit FIFO Size Register"
hexmask.long.word 0x00 16.--31. 1. " INEPTXF0DEP     ,IN endpoint TXFIFO 0 depth"
hexmask.long.word 0x00 0.--15. 0x01 "                             INEPTXF0STADDR ,IN endpoint FIFO 0 transmit RAM start address"
else
group.long 0x28++0x03
line.long 0x00 "GNPTXFSIZ,Non-Periodic Transmit FIFO Size Register"
hexmask.long.word 0x00 16.--31. 1. " NPTXFDEP        ,Non-periodic TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 "                             NPTXFSTADDR    ,Non-periodic transmit RAM start address"
endif
rgroup.long 0x2C++0x03
line.long 0x00 "GNPTXSTS,Non-Periodic Transmit FIFO/Queue Status Register"
bitfld.long 0x00 27.--30. " NPTXQTOP[6:3]   ,Channel/endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "                               NPTXQTOP[2:1]  ,TX request queue" "IN/OUT token,Zero-length transmit packet,PING/CSPLIT token,Channel halt"
bitfld.long 0x00 24. "  NPTXQTOP[0]         ,Terminate" "Not terminated,Terminated"
newline
bitfld.long 0x00 16.--23. " NPTXQSPCAVAIL   ,Non-periodic transmit request queue space available" "Full,1,2,3,4,5,6,7,8,?..."
hexmask.long.word 0x00 0.--15. 1. "                             NPTXFSPCAVAIL  ,Non-periodic TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x34))&0x8000000)==0x00)
group.long 0x34++0x03
line.long 0x00 "GPVNDCTL,PHY Vendor Control Register"
bitfld.long 0x00 31. " DISULPIDRVR     ,Disable ULPI drivers" "No,Yes"
bitfld.long 0x00 27. "                              VSTSDONE       ,VStatus done" "Not done,Done"
rbitfld.long 0x00 26. "                     VSTSBSY             ,VStatus busy" "Not busy,Busy"
newline
bitfld.long 0x00 25. " NEWREGREQ       ,New register request" "Not requested,Requested"
bitfld.long 0x00 22. "                    REGWR          ,Register write" "Read,Write"
hexmask.long.byte 0x00 16.--21. 0x01 "                        REGADDR             ,Register address"
newline
hexmask.long.byte 0x00 8.--15. 0x01 " VCTRL           ,UTMI+ vendor control register address"
else
group.long 0x34++0x03
line.long 0x00 "GPVNDCTL,PHY Vendor Control Register"
bitfld.long 0x00 31. " DISULPIDRVR     ,Disable ULPI drivers" "No,Yes"
bitfld.long 0x00 27. "                              VSTSDONE       ,VStatus done" "Not done,Done"
rbitfld.long 0x00 26. "                     VSTSBSY             ,VStatus busy" "Not busy,Busy"
newline
bitfld.long 0x00 25. " NEWREGREQ       ,New register request" "Not requested,Requested"
bitfld.long 0x00 22. "                    REGWR          ,Register write" "Read,Write"
hexmask.long.byte 0x00 16.--21. 0x01 "                        REGADDR             ,Register address"
newline
hexmask.long.byte 0x00 8.--15. 0x01 " VCTRL           ,UTMI+ vendor control register address"
hexmask.long.byte 0x00 0.--7. 1. "                               REGDATA        ,Register data"
endif
newline
group.long 0x38++0x07
line.long 0x00 "GGPIO,General Purpose Input/Output Register"
bitfld.long 0x00 31. " GPO[15] ,General purpose output 15" "Low,High"
bitfld.long 0x00 30. "  [14] ,General purpose output 14" "Low,High"
bitfld.long 0x00 29. "  [13] ,General purpose output 13" "Low,High"
bitfld.long 0x00 28. "  [12] ,General purpose output 12" "Low,High"
bitfld.long 0x00 27. "  [11] ,General purpose output 11" "Low,High"
bitfld.long 0x00 26. "  [10] ,General purpose output 10" "Low,High"
newline
bitfld.long 0x00 25. " [9]     ,General purpose output 9" "Low,High"
bitfld.long 0x00 24. "  [8]  ,General purpose output 8" "Low,High"
bitfld.long 0x00 23. "  [7]  ,General purpose output 7" "Low,High"
bitfld.long 0x00 22. "  [6]  ,General purpose output 6" "Low,High"
bitfld.long 0x00 21. "  [5]  ,General purpose output 5" "Low,High"
bitfld.long 0x00 20. "  [4]  ,General purpose output 4" "Low,High"
newline
bitfld.long 0x00 19. " [3]     ,General purpose output 3" "Low,High"
bitfld.long 0x00 18. "  [2]  ,General purpose output 2" "Low,High"
bitfld.long 0x00 17. "  [1]  ,General purpose output 1" "Low,High"
bitfld.long 0x00 16. "  [0]  ,General purpose output 0" "Low,High"
newline
bitfld.long 0x00 15. " GPI[15] ,General purpose input 15" "Low,High"
bitfld.long 0x00 14. "  [14] ,General purpose input 14" "Low,High"
bitfld.long 0x00 13. "  [13] ,General purpose input 13" "Low,High"
bitfld.long 0x00 12. "  [12] ,General purpose input 12" "Low,High"
bitfld.long 0x00 11. "  [11] ,General purpose input 11" "Low,High"
bitfld.long 0x00 10. "  [10] ,General purpose input 10" "Low,High"
newline
bitfld.long 0x00 9. " [9]     ,General purpose input 9" "Low,High"
bitfld.long 0x00 8. "  [8]  ,General purpose input 8" "Low,High"
bitfld.long 0x00 7. "  [7]  ,General purpose input 7" "Low,High"
bitfld.long 0x00 6. "  [6]  ,General purpose input 6" "Low,High"
bitfld.long 0x00 5. "  [5]  ,General purpose input 5" "Low,High"
bitfld.long 0x00 4. "  [4]  ,General purpose input 4" "Low,High"
newline
bitfld.long 0x00 3. " [3]     ,General purpose input 3" "Low,High"
bitfld.long 0x00 2. "  [2]  ,General purpose input 2" "Low,High"
bitfld.long 0x00 1. "  [1]  ,General purpose input 1" "Low,High"
bitfld.long 0x00 0. "  [0]  ,General purpose input 0" "Low,High"
newline
line.long 0x04 "GUID,User ID Register"
rgroup.long 0x40++0x13
line.long 0x00 "GSNPSID,Synopsys ID Register"
line.long 0x04 "GHWCFG1,User HW Config1 Register"
bitfld.long 0x04 30.--31. " EP15DIR         ,Endpoint 15 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 28.--29. "                            EP14DIR        ,Endpoint 14 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 26.--27. "                        EP13DIR             ,Endpoint 13 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 24.--25. " EP12DIR         ,Endpoint 12 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 22.--23. "                            EP11DIR        ,Endpoint 11 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 20.--21. "                        EP10DIR             ,Endpoint 10 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 18.--19. " EP9DIR          ,Endpoint 9 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 16.--17. "                            EP8DIR         ,Endpoint 8 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 14.--15. "                        EP7DIR              ,Endpoint 7 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 12.--13. " EP6DIR          ,Endpoint 6 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 10.--11. "                            EP5DIR         ,Endpoint 5 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 8.--9. "                        EP4DIR              ,Endpoint 4 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 6.--7. " EP3DIR          ,Endpoint 3 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 4.--5. "                            EP2DIR         ,Endpoint 2 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 2.--3. "                        EP1DIR              ,Endpoint 1 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 0.--1. " EP0DIR          ,Endpoint 0 direction" "BIDIR,IN,OUT,?..."
line.long 0x08 "GHWCFG2,User HW Config2 Register"
bitfld.long 0x08 26.--30. " TKNQDEPTH       ,Device mode IN token sequence learning queue depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,?..."
bitfld.long 0x08 24.--25. "                               PTXQDEPTH      ,Host mode periodic request queue depth" "2,4,8,16"
bitfld.long 0x08 22.--23. "                           NPTXQDEPTH          ,Non-periodic request queue depth" "2,4,8,?..."
newline
bitfld.long 0x08 20. " MULTIPROCINTRPT ,Multi processor interrupt enabled" "Disabled,Enabled"
bitfld.long 0x08 19. "                         DYNFIFOSIZING  ,Dynamic FIFO sizing enabled" "Disabled,Enabled"
bitfld.long 0x08 18. "                     PERIOSUPPORT        ,Periodic OUT channels supported in host mode" "No,Yes"
newline
bitfld.long 0x08 14.--17. " NUMHSTCHNL      ,Number of host channels" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
bitfld.long 0x08 10.--13. "                               NUMDEVEPS      ,Number of device endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 8.--9. "                           FSPHYTYPE           ,Full-speed PHY interface type" "Not supported,Supported,Shared with UTMI+,Shared with ULPI"
newline
bitfld.long 0x08 6.--7. " HSPHYTYPE       ,High-speed PHY interface type" "Not supported,UTMI+,ULPI,UTMI+ and ULPI"
bitfld.long 0x08 5. "                   SINGPNT        ,Point-to-point" "Multi,Single"
bitfld.long 0x08 3.--4. "                       OTGATCH             ,Architecture" "Slave-only,External DMA,Internal DMA,?..."
newline
bitfld.long 0x08 0.--2. " OTGMODE         ,Mode of operation" "HNP- and SRP-Capable OTG,SRP-Capable OTG,Non-HNP and Non-SRP Capable OTG,SRP-Capable Device,Non-OTG Device,SRP-Capable Host,Non-OTG Host,?..."
line.long 0x0C "GHWCFG3,User HW Config3 Register"
hexmask.long.word 0x0C 16.--31. 1. " DFIFODEPTH      ,DFIFO depth"
bitfld.long 0x0C 15. "                             LPMMODE        ,LPM mode specified for mode of operation" "Disabled,Enabled"
bitfld.long 0x0C 14. "                     BCSUPPORT           ,HS OTG controller support for battery charger indication" "Not supported,Supported"
newline
bitfld.long 0x0C 13. " HSTCMODE        ,HSTC mode specified for mode of operation" "Not capable,Capable"
bitfld.long 0x0C 12. "                      ADPSUPPORT     ,ADP logic present within or external to the HS OTG controller indication" "Not present,Present"
bitfld.long 0x0C 11. "                  RSTTYPE             ,Reset style for clocked always blocks in RTL" "Asynchronous,Synchronous"
newline
bitfld.long 0x0C 10. " OPTFEATURE      ,Optional features removed" "Not removed,Removed"
bitfld.long 0x0C 9. "                      VNDCTLSUPT     ,Vendor control interface support" "Not available,Available"
bitfld.long 0x0C 8. "                I2CINTSEL           ,I2C selection" "Not available,Available"
newline
bitfld.long 0x0C 7. " OTGEN           ,OTG function enabled" "Not capable,Capable"
bitfld.long 0x0C 4.--6. "                      PKTSIZEWIDTH   ,Width of packet size counters" "4b,5b,6b,7b,8b,9b,10b,?..."
bitfld.long 0x0C 0.--3. "                          XFERSIZEWIDTH       ,Width of transfer size counters" "11b,12b,13b,14b,15b,16b,17b,18b,19b,?..."
line.long 0x10 "GHWCFG4,User HW Config4 Register"
bitfld.long 0x10 31. " DESCDMA         ,Scatter/gather DMA configuration" "Non dynamic,Dynamic"
bitfld.long 0x10 30. "                      DESCDMAENABLED ,Scatter/gather DMA configuration" "Non-scatter/gather,Scatter/gather"
bitfld.long 0x10 26.--29. "           INEPS               ,Number of device mode IN endpoints including control endpoints" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
newline
bitfld.long 0x10 25. " DEDFIFOMODE     ,Enable dedicated transmit FIFO for device IN endpoints" "Disabled,Enabled"
bitfld.long 0x10 24. "                         SESSENDFLTR    ,Session_end filter enabled" "Disabled,Enabled"
bitfld.long 0x10 23. "                     BVALIDFLTR          ,B_valid filter enabled" "Disabled,Enabled"
newline
bitfld.long 0x10 22. " AVALIDFLTR      ,A_valid filter enabled" "Disabled,Enabled"
bitfld.long 0x10 21. "                         VBUSVALIDFLTR  ,VBUS valid filter enabled" "Disabled,Enabled"
bitfld.long 0x10 20. "                     IDDGFLTR            ,IDDIG filter enable" "Disabled,Enabled"
newline
bitfld.long 0x10 16.--19. " NUMCTLEPS       ,Number of device mode control endpoints in addition to endpoint 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x10 14.--15. "                               PHYDATAWIDTH   ,UTMI+ PHY/ULPI-to-internal UTMI+ wrapper data width" "8b,16b,8b/16b,?..."
bitfld.long 0x10 7. "                       EXTENDEDHIBERNATION ,Enable extended hibernation" "Disabled,Enabled"
newline
bitfld.long 0x10 6. " HIBERNATION     ,Enable hibernation" "Disabled,Enabled"
bitfld.long 0x10 5. "                         AHBFREQ        ,Minimum AHB frequency less than 60 MHz" "No,Yes"
bitfld.long 0x10 4. "                          PARTIALPWRDN        ,Enable partial power down" "Disabled,Enabled"
newline
bitfld.long 0x10 0.--3. " NUMDEVPERIOEPS  ,Number of device mode periodic IN endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x5C++0x03
line.long 0x00 "GDFIFOCFG,Global DFIFO Configuration Register"
hexmask.long.word 0x00 16.--31. 0x01 " EPINFOBASEADDR  ,Start address of the EP info controller"
hexmask.long.word 0x00 0.--15. 1. "                             GDFIFOCFG      ,Dynamic programming of the DFIFO size"
group.long 0x100++0x03
line.long 0x00 "HPTXFSIZ,Host Periodic Transmit FIFO Size Register"
hexmask.long.word 0x00 16.--29. 1. " PTXFSIZE        ,Host periodic TXFIFO depth"
hexmask.long.word 0x00 0.--14. 0x01 "                             PTXFSTADDR     ,Host periodic TXFIFO start address"
newline
group.long 0x104++0x03
line.long 0x00 "DIEPTXF1,Device IN Endpoint Transmit FIFO Size Register 1"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--14. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x108++0x03
line.long 0x00 "DIEPTXF2,Device IN Endpoint Transmit FIFO Size Register 2"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--14. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x10C++0x03
line.long 0x00 "DIEPTXF3,Device IN Endpoint Transmit FIFO Size Register 3"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x110++0x03
line.long 0x00 "DIEPTXF4,Device IN Endpoint Transmit FIFO Size Register 4"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x114++0x03
line.long 0x00 "DIEPTXF5,Device IN Endpoint Transmit FIFO Size Register 5"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x118++0x03
line.long 0x00 "DIEPTXF6,Device IN Endpoint Transmit FIFO Size Register 6"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x11C++0x03
line.long 0x00 "DIEPTXF7,Device IN Endpoint Transmit FIFO Size Register 7"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x120++0x03
line.long 0x00 "DIEPTXF8,Device IN Endpoint Transmit FIFO Size Register 8"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x124++0x03
line.long 0x00 "DIEPTXF9,Device IN Endpoint Transmit FIFO Size Register 9"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x128++0x03
line.long 0x00 "DIEPTXF10,Device IN Endpoint Transmit FIFO Size Register 10"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x12C++0x03
line.long 0x00 "DIEPTXF11,Device IN Endpoint Transmit FIFO Size Register 11"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x130++0x03
line.long 0x00 "DIEPTXF12,Device IN Endpoint Transmit FIFO Size Register 12"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x134++0x03
line.long 0x00 "DIEPTXF13,Device IN Endpoint Transmit FIFO Size Register 13"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x138++0x03
line.long 0x00 "DIEPTXF14,Device IN Endpoint Transmit FIFO Size Register 14"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x13C++0x03
line.long 0x00 "DIEPTXF15,Device IN Endpoint Transmit FIFO Size Register 15"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x140++0x03
line.long 0x00 "DIEPTXF16,Device IN Endpoint Transmit FIFO Size Register 16"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
newline
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long 0x400++0x03
line.long 0x00 "HCFG,Host Configuration Register"
bitfld.long 0x00 31. " MODECHTIMED         ,Mode change ready timer enable" "Disabled,Enabled"
bitfld.long 0x00 26. "              PERSCHEDENA    ,Enable periodic scheduling" "Disabled,Enabled"
bitfld.long 0x00 23. "            DESCDMA        ,Enable scatter/gather DMA in host mode" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 8.--15. 1. " RESVALID            ,Resume validation period"
bitfld.long 0x00 7. "                    ENA32KHZS      ,Enable 32 KHz suspend mode" "Disabled,Enabled"
bitfld.long 0x00 2. "            FSLSSUPP       ,FS- and LS-only support" "HS/FS/LS,FS/LS-only"
newline
bitfld.long 0x00 0.--1. " FSLSPCLKSEL         ,FS/LS PHY clock select" "30/60MHz,48MHz,6MHz,?..."
else
group.long 0x400++0x03
line.long 0x00 "HCFG,Host Configuration Register"
bitfld.long 0x00 31. " MODECHTIMED         ,Mode change ready timer enable" "Disabled,Enabled"
bitfld.long 0x00 26. "              PERSCHEDENA    ,Enable periodic scheduling" "Disabled,Enabled"
bitfld.long 0x00 24.--25. "            FRLISTEN       ,Frame list entries" "8,16,32,63"
newline
bitfld.long 0x00 23. " DESCDMA             ,Enable scatter/gather DMA in host mode" "Disabled,Enabled"
hexmask.long.byte 0x00 8.--15. 1. "              RESVALID       ,Resume validation period"
bitfld.long 0x00 7. "                  ENA32KHZS      ,Enable 32 KHz suspend mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " FSLSSUPP            ,FS- and LS-only support" "HS/FS/LS,FS/LS-only"
bitfld.long 0x00 0.--1. "            FSLSPCLKSEL    ,FS/LS PHY clock select" "30/60MHz,48MHz,6MHz,?..."
endif
group.long 0x404++0x03
line.long 0x00 "HFIR,Host Frame Interval Register"
bitfld.long 0x00 16. " HFIRRLDCTRL         ,Dynamic reload capable" "Not capable,Capable"
hexmask.long.word 0x00 0.--15. 1. "           FRINT          ,Frame interval"
rgroup.long 0x408++0x03
line.long 0x00 "HFNUM,Host Frame Number/Frame Time Remaining Register"
hexmask.long.word 0x00 16.--31. 1. " FRREM               ,Frame time remaining"
hexmask.long.word 0x00 0.--15. 1. "                  FRNUM          ,Frame number"
rgroup.long 0x410++0x07
line.long 0x00 "HPTXSTS,Host Periodic Transmit FIFO/Queue Status Register"
bitfld.long 0x00 31. " PTXQTOP[7]          ,Odd/even frame" "Even,Odd"
bitfld.long 0x00 27.--30. "                  PTXQTOP[6:3]   ,Channel/endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "                  PTXQTOP[2:1]   ,Type" "IN/OUT,Zero-length packet,CSPLIT,Disabled"
newline
bitfld.long 0x00 24. " PTXQTOP[0]          ,Terminate" "Not terminated,Terminated"
bitfld.long 0x00 16.--23. "        PTXQSPCAVAIL   ,Periodic transmit request queue space available" "Full,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,?..."
hexmask.long.word 0x00 0.--15. 1. "                PTXFSPCAVAIL   ,Periodic transmit data FIFO space available"
line.long 0x04 "HAINT,Host All Channels Interrupt Register"
bitfld.long 0x04 15. " HAINT[15]           ,Channel interrupt for channel number 15" "No interrupt,Interrupt"
bitfld.long 0x04 14. "          [14]           ,Channel interrupt for channel number 14" "No interrupt,Interrupt"
bitfld.long 0x04 13. "        [13]           ,Channel interrupt for channel number 13" "No interrupt,Interrupt"
newline
bitfld.long 0x04 12. " [12]                ,Channel interrupt for channel number 12" "No interrupt,Interrupt"
bitfld.long 0x04 11. "          [11]           ,Channel interrupt for channel number 11" "No interrupt,Interrupt"
bitfld.long 0x04 10. "        [10]           ,Channel interrupt for channel number 10" "No interrupt,Interrupt"
newline
bitfld.long 0x04 9. " [9]                 ,Channel interrupt for channel number 9" "No interrupt,Interrupt"
bitfld.long 0x04 8. "          [8]            ,Channel interrupt for channel number 8" "No interrupt,Interrupt"
bitfld.long 0x04 7. "        [7]            ,Channel interrupt for channel number 7" "No interrupt,Interrupt"
newline
bitfld.long 0x04 6. " [6]                 ,Channel interrupt for channel number 6" "No interrupt,Interrupt"
bitfld.long 0x04 5. "          [5]            ,Channel interrupt for channel number 5" "No interrupt,Interrupt"
bitfld.long 0x04 4. "        [4]            ,Channel interrupt for channel number 4" "No interrupt,Interrupt"
newline
bitfld.long 0x04 3. " [3]                 ,Channel interrupt for channel number 3" "No interrupt,Interrupt"
bitfld.long 0x04 2. "          [2]            ,Channel interrupt for channel number 2" "No interrupt,Interrupt"
bitfld.long 0x04 1. "        [1]            ,Channel interrupt for channel number 1" "No interrupt,Interrupt"
newline
bitfld.long 0x04 0. " [0]                 ,Channel interrupt for channel number 0" "No interrupt,Interrupt"
group.long 0x418++0x07
line.long 0x00 "HAINTMSK,Host All Channels Interrupt Mask Register"
bitfld.long 0x00 15. " HAINTMSK[15]        ,Channel interrupt mask for channel 15" "0,1"
bitfld.long 0x00 14. "                     [14]           ,Channel interrupt mask for channel 14" "0,1"
bitfld.long 0x00 13. "                   [13]           ,Channel interrupt mask for channel 13" "0,1"
newline
bitfld.long 0x00 12. " [12]                ,Channel interrupt mask for channel 12" "0,1"
bitfld.long 0x00 11. "                     [11]           ,Channel interrupt mask for channel 11" "0,1"
bitfld.long 0x00 10. "                   [10]           ,Channel interrupt mask for channel 10" "0,1"
newline
bitfld.long 0x00 9. " [9]                 ,Channel interrupt mask for channel 9" "0,1"
bitfld.long 0x00 8. "                     [8]            ,Channel interrupt mask for channel 8" "0,1"
bitfld.long 0x00 7. "                   [7]            ,Channel interrupt mask for channel 7" "0,1"
newline
bitfld.long 0x00 6. " [6]                 ,Channel interrupt mask for channel 6" "0,1"
bitfld.long 0x00 5. "                     [5]            ,Channel interrupt mask for channel 5" "0,1"
bitfld.long 0x00 4. "                   [4]            ,Channel interrupt mask for channel 4" "0,1"
newline
bitfld.long 0x00 3. " [3]                 ,Channel interrupt mask for channel 3" "0,1"
bitfld.long 0x00 2. "                     [2]            ,Channel interrupt mask for channel 2" "0,1"
bitfld.long 0x00 1. "                   [1]            ,Channel interrupt mask for channel 1" "0,1"
newline
bitfld.long 0x00 0. " [0]                 ,Channel interrupt mask for channel 0" "0,1"
line.long 0x04 "HFLBADDR,Host Frame List Base Address Register"
group.long 0x440++0x03
line.long 0x00 "HPRT,Host Port Control And Status Register"
rbitfld.long 0x00 17.--18. " PRTSPD              ,Port speed" "High,Full,Low,?..."
bitfld.long 0x00 13.--16. "                  PRTTSTCTL      ,Port test control" "Disabled,J,K,SEO_NAK,Packet,Force,?..."
bitfld.long 0x00 12. "            PRTPWR         ,Port power" "Off,On"
newline
rbitfld.long 0x00 11. " PRTLNSTS[1]         ,Logic level of D+" "Low,High"
rbitfld.long 0x00 10. "                  [0]            ,Logic level of D-" "Low,High"
bitfld.long 0x00 8. "                PRTRST         ,Port reset" "No reset,Reset"
newline
bitfld.long 0x00 7. " PRTSUSP             ,Port suspend" "Not suspended,Suspended"
bitfld.long 0x00 6. "         PRTSET         ,Port resume" "Not resumed,Resumed"
eventfld.long 0x00 5. "         PRTOVRCURRCHNG ,Port overcurrent change" "Not changed,Changed"
newline
rbitfld.long 0x00 4. " PRTOVRCURRACT       ,Port overcurrent active" "No overcurrent,Overcurrent"
bitfld.long 0x00 3. "        PRTENCHNG      ,Port enable/disable change" "Not changed,Changed"
bitfld.long 0x00 2. "         PRTENA         ,Port enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. " PRTCONNDET          ,Port connect detected" "Not detected,Detected"
rbitfld.long 0x00 0. "          PRTCONNSTS     ,Port connect status" "Not connected,Connected"
group.long 0x500++0x07
line.long 0x00 "HCCHAR0,Host Channel 0 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT0,Host Channel 0 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x500+0x08)++0x07
line.long 0x00 "HCINT0,Hot Channel 0 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK0,Host Channel 0 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x500+0x08)++0x07
line.long 0x00 "HCINT0,Hot Channel 0 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK0,Host Channel 0 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x500+0x10)++0x07
line.long 0x00 "HCTSIZ0,Host Channel 0 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA0,Host Channel 0 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x500+0x1C)++0x03
line.long 0x00 "HCDMAB0,Host Channel 0 DMA Buffer Address Register"
else
hgroup.long (0x500+0x1C)++0x03
hide.long 0x00 "HCDMAB0,Host Channel 0 DMA Buffer Address Register"
endif
group.long 0x520++0x07
line.long 0x00 "HCCHAR1,Host Channel 1 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT1,Host Channel 1 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x520+0x08)++0x07
line.long 0x00 "HCINT1,Hot Channel 1 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK1,Host Channel 1 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x520+0x08)++0x07
line.long 0x00 "HCINT1,Hot Channel 1 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK1,Host Channel 1 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x520+0x10)++0x07
line.long 0x00 "HCTSIZ1,Host Channel 1 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA1,Host Channel 1 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x520+0x1C)++0x03
line.long 0x00 "HCDMAB1,Host Channel 1 DMA Buffer Address Register"
else
hgroup.long (0x520+0x1C)++0x03
hide.long 0x00 "HCDMAB1,Host Channel 1 DMA Buffer Address Register"
endif
group.long 0x540++0x07
line.long 0x00 "HCCHAR2,Host Channel 2 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT2,Host Channel 2 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x540+0x08)++0x07
line.long 0x00 "HCINT2,Hot Channel 2 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK2,Host Channel 2 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x540+0x08)++0x07
line.long 0x00 "HCINT2,Hot Channel 2 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK2,Host Channel 2 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x540+0x10)++0x07
line.long 0x00 "HCTSIZ2,Host Channel 2 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA2,Host Channel 2 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x540+0x1C)++0x03
line.long 0x00 "HCDMAB2,Host Channel 2 DMA Buffer Address Register"
else
hgroup.long (0x540+0x1C)++0x03
hide.long 0x00 "HCDMAB2,Host Channel 2 DMA Buffer Address Register"
endif
group.long 0x560++0x07
line.long 0x00 "HCCHAR3,Host Channel 3 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT3,Host Channel 3 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x560+0x08)++0x07
line.long 0x00 "HCINT3,Hot Channel 3 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK3,Host Channel 3 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x560+0x08)++0x07
line.long 0x00 "HCINT3,Hot Channel 3 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK3,Host Channel 3 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x560+0x10)++0x07
line.long 0x00 "HCTSIZ3,Host Channel 3 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA3,Host Channel 3 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x560+0x1C)++0x03
line.long 0x00 "HCDMAB3,Host Channel 3 DMA Buffer Address Register"
else
hgroup.long (0x560+0x1C)++0x03
hide.long 0x00 "HCDMAB3,Host Channel 3 DMA Buffer Address Register"
endif
group.long 0x580++0x07
line.long 0x00 "HCCHAR4,Host Channel 4 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT4,Host Channel 4 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x580+0x08)++0x07
line.long 0x00 "HCINT4,Hot Channel 4 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK4,Host Channel 4 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x580+0x08)++0x07
line.long 0x00 "HCINT4,Hot Channel 4 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK4,Host Channel 4 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x580+0x10)++0x07
line.long 0x00 "HCTSIZ4,Host Channel 4 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA4,Host Channel 4 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x580+0x1C)++0x03
line.long 0x00 "HCDMAB4,Host Channel 4 DMA Buffer Address Register"
else
hgroup.long (0x580+0x1C)++0x03
hide.long 0x00 "HCDMAB4,Host Channel 4 DMA Buffer Address Register"
endif
group.long 0x5A0++0x07
line.long 0x00 "HCCHAR5,Host Channel 5 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT5,Host Channel 5 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x5A0+0x08)++0x07
line.long 0x00 "HCINT5,Hot Channel 5 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK5,Host Channel 5 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x5A0+0x08)++0x07
line.long 0x00 "HCINT5,Hot Channel 5 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK5,Host Channel 5 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x5A0+0x10)++0x07
line.long 0x00 "HCTSIZ5,Host Channel 5 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA5,Host Channel 5 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x5A0+0x1C)++0x03
line.long 0x00 "HCDMAB5,Host Channel 5 DMA Buffer Address Register"
else
hgroup.long (0x5A0+0x1C)++0x03
hide.long 0x00 "HCDMAB5,Host Channel 5 DMA Buffer Address Register"
endif
group.long 0x5C0++0x07
line.long 0x00 "HCCHAR6,Host Channel 6 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT6,Host Channel 6 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x5C0+0x08)++0x07
line.long 0x00 "HCINT6,Hot Channel 6 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK6,Host Channel 6 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x5C0+0x08)++0x07
line.long 0x00 "HCINT6,Hot Channel 6 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK6,Host Channel 6 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x5C0+0x10)++0x07
line.long 0x00 "HCTSIZ6,Host Channel 6 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA6,Host Channel 6 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x5C0+0x1C)++0x03
line.long 0x00 "HCDMAB6,Host Channel 6 DMA Buffer Address Register"
else
hgroup.long (0x5C0+0x1C)++0x03
hide.long 0x00 "HCDMAB6,Host Channel 6 DMA Buffer Address Register"
endif
group.long 0x5E0++0x07
line.long 0x00 "HCCHAR7,Host Channel 7 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT7,Host Channel 7 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x5E0+0x08)++0x07
line.long 0x00 "HCINT7,Hot Channel 7 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK7,Host Channel 7 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x5E0+0x08)++0x07
line.long 0x00 "HCINT7,Hot Channel 7 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK7,Host Channel 7 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x5E0+0x10)++0x07
line.long 0x00 "HCTSIZ7,Host Channel 7 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA7,Host Channel 7 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x5E0+0x1C)++0x03
line.long 0x00 "HCDMAB7,Host Channel 7 DMA Buffer Address Register"
else
hgroup.long (0x5E0+0x1C)++0x03
hide.long 0x00 "HCDMAB7,Host Channel 7 DMA Buffer Address Register"
endif
group.long 0x600++0x07
line.long 0x00 "HCCHAR8,Host Channel 8 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT8,Host Channel 8 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x600+0x08)++0x07
line.long 0x00 "HCINT8,Hot Channel 8 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK8,Host Channel 8 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x600+0x08)++0x07
line.long 0x00 "HCINT8,Hot Channel 8 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK8,Host Channel 8 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x600+0x10)++0x07
line.long 0x00 "HCTSIZ8,Host Channel 8 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA8,Host Channel 8 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x600+0x1C)++0x03
line.long 0x00 "HCDMAB8,Host Channel 8 DMA Buffer Address Register"
else
hgroup.long (0x600+0x1C)++0x03
hide.long 0x00 "HCDMAB8,Host Channel 8 DMA Buffer Address Register"
endif
group.long 0x620++0x07
line.long 0x00 "HCCHAR9,Host Channel 9 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT9,Host Channel 9 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x620+0x08)++0x07
line.long 0x00 "HCINT9,Hot Channel 9 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK9,Host Channel 9 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x620+0x08)++0x07
line.long 0x00 "HCINT9,Hot Channel 9 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK9,Host Channel 9 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x620+0x10)++0x07
line.long 0x00 "HCTSIZ9,Host Channel 9 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA9,Host Channel 9 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x620+0x1C)++0x03
line.long 0x00 "HCDMAB9,Host Channel 9 DMA Buffer Address Register"
else
hgroup.long (0x620+0x1C)++0x03
hide.long 0x00 "HCDMAB9,Host Channel 9 DMA Buffer Address Register"
endif
group.long 0x640++0x07
line.long 0x00 "HCCHAR10,Host Channel 10 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT10,Host Channel 10 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x640+0x08)++0x07
line.long 0x00 "HCINT10,Hot Channel 10 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK10,Host Channel 10 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x640+0x08)++0x07
line.long 0x00 "HCINT10,Hot Channel 10 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK10,Host Channel 10 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x640+0x10)++0x07
line.long 0x00 "HCTSIZ10,Host Channel 10 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA10,Host Channel 10 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x640+0x1C)++0x03
line.long 0x00 "HCDMAB10,Host Channel 10 DMA Buffer Address Register"
else
hgroup.long (0x640+0x1C)++0x03
hide.long 0x00 "HCDMAB10,Host Channel 10 DMA Buffer Address Register"
endif
group.long 0x660++0x07
line.long 0x00 "HCCHAR11,Host Channel 11 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT11,Host Channel 11 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x660+0x08)++0x07
line.long 0x00 "HCINT11,Hot Channel 11 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK11,Host Channel 11 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x660+0x08)++0x07
line.long 0x00 "HCINT11,Hot Channel 11 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK11,Host Channel 11 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x660+0x10)++0x07
line.long 0x00 "HCTSIZ11,Host Channel 11 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA11,Host Channel 11 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x660+0x1C)++0x03
line.long 0x00 "HCDMAB11,Host Channel 11 DMA Buffer Address Register"
else
hgroup.long (0x660+0x1C)++0x03
hide.long 0x00 "HCDMAB11,Host Channel 11 DMA Buffer Address Register"
endif
group.long 0x680++0x07
line.long 0x00 "HCCHAR12,Host Channel 12 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT12,Host Channel 12 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x680+0x08)++0x07
line.long 0x00 "HCINT12,Hot Channel 12 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK12,Host Channel 12 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x680+0x08)++0x07
line.long 0x00 "HCINT12,Hot Channel 12 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK12,Host Channel 12 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x680+0x10)++0x07
line.long 0x00 "HCTSIZ12,Host Channel 12 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA12,Host Channel 12 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x680+0x1C)++0x03
line.long 0x00 "HCDMAB12,Host Channel 12 DMA Buffer Address Register"
else
hgroup.long (0x680+0x1C)++0x03
hide.long 0x00 "HCDMAB12,Host Channel 12 DMA Buffer Address Register"
endif
group.long 0x6A0++0x07
line.long 0x00 "HCCHAR13,Host Channel 13 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT13,Host Channel 13 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x6A0+0x08)++0x07
line.long 0x00 "HCINT13,Hot Channel 13 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK13,Host Channel 13 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x6A0+0x08)++0x07
line.long 0x00 "HCINT13,Hot Channel 13 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK13,Host Channel 13 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x6A0+0x10)++0x07
line.long 0x00 "HCTSIZ13,Host Channel 13 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA13,Host Channel 13 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x6A0+0x1C)++0x03
line.long 0x00 "HCDMAB13,Host Channel 13 DMA Buffer Address Register"
else
hgroup.long (0x6A0+0x1C)++0x03
hide.long 0x00 "HCDMAB13,Host Channel 13 DMA Buffer Address Register"
endif
group.long 0x6C0++0x07
line.long 0x00 "HCCHAR14,Host Channel 14 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT14,Host Channel 14 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x6C0+0x08)++0x07
line.long 0x00 "HCINT14,Hot Channel 14 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK14,Host Channel 14 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x6C0+0x08)++0x07
line.long 0x00 "HCINT14,Hot Channel 14 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK14,Host Channel 14 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x6C0+0x10)++0x07
line.long 0x00 "HCTSIZ14,Host Channel 14 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA14,Host Channel 14 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x6C0+0x1C)++0x03
line.long 0x00 "HCDMAB14,Host Channel 14 DMA Buffer Address Register"
else
hgroup.long (0x6C0+0x1C)++0x03
hide.long 0x00 "HCDMAB14,Host Channel 14 DMA Buffer Address Register"
endif
group.long 0x6E0++0x07
line.long 0x00 "HCCHAR15,Host Channel 15 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT15,Host Channel 15 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x00)
group.long (0x6E0+0x08)++0x07
line.long 0x00 "HCINT15,Hot Channel 15 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK15,Host Channel 15 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x6E0+0x08)++0x07
line.long 0x00 "HCINT15,Hot Channel 15 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK15,Host Channel 15 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x6E0+0x10)++0x07
line.long 0x00 "HCTSIZ15,Host Channel 15 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA15,Host Channel 15 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x6E0+0x1C)++0x03
line.long 0x00 "HCDMAB15,Host Channel 15 DMA Buffer Address Register"
else
hgroup.long (0x6E0+0x1C)++0x03
hide.long 0x00 "HCDMAB15,Host Channel 15 DMA Buffer Address Register"
endif
group.long 0x800++0x03
line.long 0x00 "DCFG,Device Configuration Register"
bitfld.long 0x00 26.--31. " RESVALID            ,Resume validation period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "                    PERSCHINTVL    ,Periodic scheduling interval" "25%,50%,75%,?..."
bitfld.long 0x00 23. "                 DESCDMA        ,Enable scatter/gather DMA in device mode" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " ERRATICINTMSK       ,Erratic error interrupt mask" "Not masked,Masked"
bitfld.long 0x00 14. "            XCVRDLY        ,XCVR delay" "Disabled,Enabled"
bitfld.long 0x00 13. "            ENDEVOUTNAK    ,Enable device OUT NAK" "Disabled,Enabled"
newline
bitfld.long 0x00 11.--12. " PERFRINT            ,Periodic frame interval" "80%,85%,90%,95%"
hexmask.long.byte 0x00 4.--10. 0x10 "                   DEVADDR        ,Device address"
bitfld.long 0x00 3. "                  ENA32KHZSUSP   ,Enable 32 KHz suspend mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " NZSTSOUTHSHK        ,Non-zero-length status OUT handshake" "Not sent,Sent"
bitfld.long 0x00 0.--1. "              DEVSPD         ,Device speed" "HS 2.0,FS 2.0,LS 1.1,FS 1.1"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long 0x804++0x03
line.long 0x00 "DCTL,Device Control Register"
bitfld.long 0x00 17. " ENCONTONBNA         ,Enable continue on BNA" "Disabled,Enabled"
bitfld.long 0x00 16. "              NAKONBBLE      ,NAK on babble error" "Disabled,Enabled"
bitfld.long 0x00 15. "            IGNRFRMNUM     ,Ignore frame number for isochronous end points" "Not ignored,Ignored"
newline
bitfld.long 0x00 11. " PWRONPRGDONE        ,Power-on programming done" "Not done,Done"
bitfld.long 0x00 10. "              CGOUTNAK       ,Clear global OUT NAK" "No clear,Clear"
bitfld.long 0x00 9. "            SGOUTNAK       ,Set global OUT NAK" "Not set,Set"
newline
bitfld.long 0x00 8. " CGNPINNAK           ,Clear global non-periodic IN NAK" "No clear,Clear"
bitfld.long 0x00 7. "              SGNPINNAK      ,Set global non-periodic IN NAK" "Not set,Set"
bitfld.long 0x00 4.--6. "            TSTCTL         ,Test control" "Disabled,J,K,SEO_NAK,Packet,Force,?..."
newline
rbitfld.long 0x00 3. " GOUTNAKSTS          ,Global OUT NAK status" "NAK/STALL,All"
rbitfld.long 0x00 2. "             GNPINNAKSTS    ,Global non-periodic IN NAK status" "0,1"
bitfld.long 0x00 1. "                   SFTDISCON      ,Soft disconnect" "Connect,Disconnect"
newline
bitfld.long 0x00 0. " RMTWKUPSIG          ,Remote wakeup signaling" "Not sent,Sent"
else
group.long 0x804++0x03
line.long 0x00 "DCTL,Device Control Register"
bitfld.long 0x00 17. " ENCONTONBNA         ,Enable continue on BNA" "Disabled,Enabled"
bitfld.long 0x00 16. "              NAKONBBLE      ,NAK on babble error" "Disabled,Enabled"
bitfld.long 0x00 15. "            IGNRFRMNUM     ,Ignore frame number for isochronous end points" "Not ignored,Ignored"
newline
bitfld.long 0x00 13.--14. " GMC                 ,Global multi count" ",1,2,3"
bitfld.long 0x00 11. "                     PWRONPRGDONE   ,Power-on programming done" "Not done,Done"
bitfld.long 0x00 10. "            CGOUTNAK       ,Clear global OUT NAK" "No clear,Clear"
newline
bitfld.long 0x00 9. " SGOUTNAK            ,Set global OUT NAK" "Not set,Set"
bitfld.long 0x00 8. "               CGNPINNAK      ,Clear global non-periodic IN NAK" "No clear,Clear"
bitfld.long 0x00 7. "            SGNPINNAK      ,Set global non-periodic IN NAK" "Not set,Set"
newline
bitfld.long 0x00 4.--6. " TSTCTL              ,Test control" "Disabled,J,K,SEO_NAK,Packet,Force,?..."
rbitfld.long 0x00 3. "              GOUTNAKSTS     ,Global OUT NAK status" "NAK/STALL,All"
rbitfld.long 0x00 2. "           GNPINNAKSTS    ,Global non-periodic IN NAK status" "0,1"
newline
bitfld.long 0x00 1. " SFTDISCON           ,Soft disconnect" "Connect,Disconnect"
bitfld.long 0x00 0. "            RMTWKUPSIG     ,Remote wakeup signaling" "Not sent,Sent"
endif
rgroup.long 0x808++0x03
line.long 0x00 "DSTS,Device Status Register"
bitfld.long 0x00 23. " DEVLNSTS[1]         ,Logic level of D+" "Low,High"
bitfld.long 0x00 22. "                  DEVLNSTS[0]    ,Logic level of D-" "Low,High"
hexmask.long.word 0x00 8.--21. 1. "                SOFFN          ,Frame or microframe number of the receiver SOF"
newline
bitfld.long 0x00 3. " ERRTICERR           ,Erratic error" "No error,Error"
bitfld.long 0x00 1.--2. "              ENUMSPD        ,Enumerated speed" "HS,FS-30MHz/60MHz,LS,FS-48MHz"
bitfld.long 0x00 0. "      SUSPSTS        ,Suspend status" "Not suspended,Suspended"
group.long 0x810++0x07
line.long 0x00 "DIEPMSK,Device IN Endpoint Common Interrupt Mask Register"
bitfld.long 0x00 13. " NAKMSK              ,NAK interrupt mask" "Masked,Not masked"
bitfld.long 0x00 9. "            BNAININTRMSK   ,BNA interrupt mask" "Masked,Not masked"
bitfld.long 0x00 8. "          TXFIFOUNDRNMSK ,FIFO underrun mask" "Masked,Not masked"
newline
bitfld.long 0x00 6. " INEPNAKEFFMSK       ,IN endpoint NAK effective mask" "Masked,Not masked"
bitfld.long 0x00 4. "            INTKNTXFEMPMSK ,IN token received when TXFIFO empty mask" "Masked,Not masked"
bitfld.long 0x00 3. "          TIMEOUTMSK     ,Timeout condition mask" "Masked,Not masked"
newline
bitfld.long 0x00 2. " AHBERRMSK           ,AHB error mask" "Masked,Not masked"
bitfld.long 0x00 1. "            EPDISBLDMSK    ,Endpoint disabled interrupt mask" "Masked,Not masked"
bitfld.long 0x00 0. "          XFERCOMPLMSK   ,Transfer completed interrupt mask" "Masked,Not masked"
line.long 0x04 "DOEPMSK,Device OUT Endpoint Common Interrupt Mask Register"
bitfld.long 0x04 14. " NYETMSK             ,NYET interrupt mask" "Masked,Not masked"
bitfld.long 0x04 13. "            NAKMSK         ,NAK interrupt mask" "Masked,Not masked"
bitfld.long 0x04 12. "          BBLEERRMSK     ,Babble error interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " BNAOUTINTRMSK       ,BNA interrupt mask" "Masked,Not masked"
bitfld.long 0x04 8. "            OUTPKTERRMSK   ,OUT packet error mask" "Masked,Not masked"
bitfld.long 0x04 6. "          BACK2BACKSETUP ,Back-to-back SETUP packets received mask" "Masked,Not masked"
newline
bitfld.long 0x04 5. " STSPHSERCVDMSK      ,Status phase received mask" "Masked,Not masked"
bitfld.long 0x04 4. "            OUTTKNEPDISMSK ,OUT token received when endpoint disabled mask" "Masked,Not masked"
bitfld.long 0x04 3. "          SETUPMSK       ,SETUP phase done mask" "Masked,Not masked"
newline
bitfld.long 0x04 2. " AHBERRMSK           ,AHB error" "Masked,Not masked"
bitfld.long 0x04 1. "            EPDISBLDMSK    ,Endpoint disabled interrupt mask" "Masked,Not masked"
bitfld.long 0x04 0. "          XFERCOMPLMSK   ,Transfer completed interrupt mask" "MAsked,Not masked"
rgroup.long 0x818++0x03
line.long 0x00 "DAINT,Device All Endpoints Interrupt Register"
bitfld.long 0x00 31. " OUTEPINT[15]        ,OUT endpoint 15 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 30. "          [14]           ,OUT endpoint 14 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 29. "        [13]           ,OUT endpoint 13 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. " [12]                ,OUT endpoint 12 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 27. "          [11]           ,OUT endpoint 11 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 26. "        [10]           ,OUT endpoint 10 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. " [9]                 ,OUT endpoint 9 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 24. "          [8]            ,OUT endpoint 8 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 23. "        [7]            ,OUT endpoint 7 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. " [6]                 ,OUT endpoint 6 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 21. "          [5]            ,OUT endpoint 5 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 20. "        [4]            ,OUT endpoint 4 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. " [3]                 ,OUT endpoint 3 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 18. "          [2]            ,OUT endpoint 2 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 17. "        [1]            ,OUT endpoint 1 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. " [0]                 ,OUT endpoint 0 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 15. "          INEPINT[15]    ,IN endpoint 15 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 14. "        [14]           ,IN endpoint 14 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. " [13]                ,IN endpoint 13 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          [12]           ,IN endpoint 12 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 11. "        [11]           ,IN endpoint 11 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " [10]                ,IN endpoint 10 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          [9]            ,IN endpoint 9 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        [8]            ,IN endpoint 8 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " [7]                 ,IN endpoint 7 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          [6]            ,IN endpoint 6 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        [5]            ,IN endpoint 5 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " [4]                 ,IN endpoint 4 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          [3]            ,IN endpoint 3 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        [2]            ,IN endpoint 2 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " [1]                 ,IN endpoint 1 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          [0]            ,IN endpoint 0 interrupt bit" "No interrupt,Interrupt"
group.long 0x81C++0x03
line.long 0x00 "DAINTMSK,Device All Endpoints Interrupt Mask Register"
bitfld.long 0x00 31. " OUTEPMSK[15]        ,OUT endpoint 15 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 30. "            [14]           ,OUT endpoint 14 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 29. "          [13]           ,OUT endpoint 13 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 28. " [12]                ,OUT endpoint 12 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 27. "            [11]           ,OUT endpoint 11 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 26. "          [10]           ,OUT endpoint 10 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 25. " [9]                 ,OUT endpoint 9 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 24. "            [8]            ,OUT endpoint 8 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 23. "          [7]            ,OUT endpoint 7 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 22. " [6]                 ,OUT endpoint 6 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 21. "            [5]            ,OUT endpoint 5 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 20. "          [4]            ,OUT endpoint 4 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 19. " [3]                 ,OUT endpoint 3 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 18. "            [2]            ,OUT endpoint 2 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 17. "          [1]            ,OUT endpoint 1 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 16. " [0]                 ,OUT endpoint 0 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 15. "            INEPMSK[15]    ,IN endpoint 15 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 14. "          [14]           ,IN endpoint 14 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 13. " [13]                ,IN endpoint 13 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 12. "            [12]           ,IN endpoint 12 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 11. "          [11]           ,IN endpoint 11 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 10. " [10]                ,IN endpoint 10 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 9. "            [9]            ,IN endpoint 9 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 8. "          [8]            ,IN endpoint 8 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 7. " [7]                 ,IN endpoint 7 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 6. "            [6]            ,IN endpoint 6 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 5. "          [5]            ,IN endpoint 5 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 4. " [4]                 ,IN endpoint 4 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 3. "            [3]            ,IN endpoint 3 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 2. "          [2]            ,IN endpoint 2 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 1. " [1]                 ,IN endpoint 1 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 0. "            [0]            ,IN endpoint 0 interrupt mask bit" "Masked,Not masked"
group.long 0x828++0x0F
line.long 0x00 "DVBUSDIS,Device VBUS Discharge Time Register"
hexmask.long.word 0x00 0.--15. 1. " DVBUSDIS            ,Device VBUS discharge time"
line.long 0x04 "DVBUSPULSE,Device VBUS Pulsing Time Register"
hexmask.long.word 0x04 0.--11. 1. " DVBUSPULSE          ,Device VBUS pulsing time"
line.long 0x08 "DTHRCTL,Device Threshold Control Register"
bitfld.long 0x08 27. " ARBPRKEN            ,Arbiter parking enable" "Disabled,Enabled"
hexmask.long.word 0x08 17.--25. 1. "              RXTHRLEN       ,Receive threshold length"
bitfld.long 0x08 16. "                RXTHREN        ,Receive threshold enable" "Disabled,Enabled"
newline
bitfld.long 0x08 11.--12. " AHBTHRRATIO         ,AHB threshold ratio" "/1,/2,/4,/8"
hexmask.long.word 0x08 2.--10. 1. "                    TXTHRLEN       ,Transmit threshold length"
bitfld.long 0x08 1. "                ISOTHREN       ,ISO IN endpoints length" "Disabled,Enabled"
newline
bitfld.long 0x08 0. " NONISOTHREN         ,Non-ISO IN endpoints threshold enable" "Disabled,Enabled"
line.long 0x0C "DIEPEMPMSK,Device IN Endpoint FIFO Empty Interrupt Mask Register"
bitfld.long 0x0C 15. " INEPTXEMPMSK[15]    ,IN endpoint TX FIFO 15 interrupt mask bit" "0,1"
bitfld.long 0x0C 14. "                     [14]           ,IN endpoint TX FIFO 14 interrupt mask bit" "0,1"
bitfld.long 0x0C 13. "                   [13]           ,IN endpoint TX FIFO 13 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 12. " [12]                ,IN endpoint TX FIFO 12 interrupt mask bit" "0,1"
bitfld.long 0x0C 11. "                     [11]           ,IN endpoint TX FIFO 11 interrupt mask bit" "0,1"
bitfld.long 0x0C 10. "                   [10]           ,IN endpoint TX FIFO 10 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 9. " [9]                 ,IN endpoint TX FIFO 9 interrupt mask bit" "0,1"
bitfld.long 0x0C 8. "                     [8]            ,IN endpoint TX FIFO 8 interrupt mask bit" "0,1"
bitfld.long 0x0C 7. "                   [7]            ,IN endpoint TX FIFO 7 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 6. " [6]                 ,IN endpoint TX FIFO 6 interrupt mask bit" "0,1"
bitfld.long 0x0C 5. "                     [5]            ,IN endpoint TX FIFO 5 interrupt mask bit" "0,1"
bitfld.long 0x0C 4. "                   [4]            ,IN endpoint TX FIFO 4 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 3. " [3]                 ,IN endpoint TX FIFO 3 interrupt mask bit" "0,1"
bitfld.long 0x0C 2. "                     [2]            ,IN endpoint TX FIFO 2 interrupt mask bit" "0,1"
bitfld.long 0x0C 1. "                   [1]            ,IN endpoint TX FIFO 1 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 0. " [0]                 ,IN endpoint TX FIFO 0 interrupt mask bit" "0,1"
group.long 0x900++0x03
line.long 0x00 "DIEPCTL0,Device Control IN Endpoint 0 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x900+0x08)++0x03
line.long 0x00 "DIEPINT0,Device IN Endpoint 0 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x900+0x08)++0x03
line.long 0x00 "DIEPINT0,Device IN Endpoint 0 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x900+0x10)++0x07
line.long 0x00 "DIEPTSIZ0,Device IN Endpoint 0 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA0,Device IN Endpoint 0 DMA Address Register"
rgroup.long (0x900+0x18)++0x03
line.long 0x00 "DTXFST0,Device IN Endpoint 0 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x900+0x1C)++0x03
line.long 0x00 "DIEPDMAB0,Device IN Endpoint 0 Buffer Address Register"
else
hgroup.long (0x900+0x1C)++0x03
hide.long 0x00 "DIEPDMAB0,Device IN Endpoint 0 Buffer Address Register"
endif
group.long 0x920++0x03
line.long 0x00 "DIEPCTL1,Device Control IN Endpoint 1 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x920+0x08)++0x03
line.long 0x00 "DIEPINT1,Device IN Endpoint 1 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x920+0x08)++0x03
line.long 0x00 "DIEPINT1,Device IN Endpoint 1 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x920+0x10)++0x07
line.long 0x00 "DIEPTSIZ1,Device IN Endpoint 1 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA1,Device IN Endpoint 1 DMA Address Register"
rgroup.long (0x920+0x18)++0x03
line.long 0x00 "DTXFST1,Device IN Endpoint 1 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x920+0x1C)++0x03
line.long 0x00 "DIEPDMAB1,Device IN Endpoint 1 Buffer Address Register"
else
hgroup.long (0x920+0x1C)++0x03
hide.long 0x00 "DIEPDMAB1,Device IN Endpoint 1 Buffer Address Register"
endif
group.long 0x940++0x03
line.long 0x00 "DIEPCTL2,Device Control IN Endpoint 2 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x940+0x08)++0x03
line.long 0x00 "DIEPINT2,Device IN Endpoint 2 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x940+0x08)++0x03
line.long 0x00 "DIEPINT2,Device IN Endpoint 2 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x940+0x10)++0x07
line.long 0x00 "DIEPTSIZ2,Device IN Endpoint 2 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA2,Device IN Endpoint 2 DMA Address Register"
rgroup.long (0x940+0x18)++0x03
line.long 0x00 "DTXFST2,Device IN Endpoint 2 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x940+0x1C)++0x03
line.long 0x00 "DIEPDMAB2,Device IN Endpoint 2 Buffer Address Register"
else
hgroup.long (0x940+0x1C)++0x03
hide.long 0x00 "DIEPDMAB2,Device IN Endpoint 2 Buffer Address Register"
endif
group.long 0x960++0x03
line.long 0x00 "DIEPCTL3,Device Control IN Endpoint 3 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x960+0x08)++0x03
line.long 0x00 "DIEPINT3,Device IN Endpoint 3 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x960+0x08)++0x03
line.long 0x00 "DIEPINT3,Device IN Endpoint 3 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x960+0x10)++0x07
line.long 0x00 "DIEPTSIZ3,Device IN Endpoint 3 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA3,Device IN Endpoint 3 DMA Address Register"
rgroup.long (0x960+0x18)++0x03
line.long 0x00 "DTXFST3,Device IN Endpoint 3 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x960+0x1C)++0x03
line.long 0x00 "DIEPDMAB3,Device IN Endpoint 3 Buffer Address Register"
else
hgroup.long (0x960+0x1C)++0x03
hide.long 0x00 "DIEPDMAB3,Device IN Endpoint 3 Buffer Address Register"
endif
group.long 0x980++0x03
line.long 0x00 "DIEPCTL4,Device Control IN Endpoint 4 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x980+0x08)++0x03
line.long 0x00 "DIEPINT4,Device IN Endpoint 4 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x980+0x08)++0x03
line.long 0x00 "DIEPINT4,Device IN Endpoint 4 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x980+0x10)++0x07
line.long 0x00 "DIEPTSIZ4,Device IN Endpoint 4 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA4,Device IN Endpoint 4 DMA Address Register"
rgroup.long (0x980+0x18)++0x03
line.long 0x00 "DTXFST4,Device IN Endpoint 4 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x980+0x1C)++0x03
line.long 0x00 "DIEPDMAB4,Device IN Endpoint 4 Buffer Address Register"
else
hgroup.long (0x980+0x1C)++0x03
hide.long 0x00 "DIEPDMAB4,Device IN Endpoint 4 Buffer Address Register"
endif
group.long 0x9A0++0x03
line.long 0x00 "DIEPCTL5,Device Control IN Endpoint 5 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x9A0+0x08)++0x03
line.long 0x00 "DIEPINT5,Device IN Endpoint 5 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x9A0+0x08)++0x03
line.long 0x00 "DIEPINT5,Device IN Endpoint 5 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x9A0+0x10)++0x07
line.long 0x00 "DIEPTSIZ5,Device IN Endpoint 5 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA5,Device IN Endpoint 5 DMA Address Register"
rgroup.long (0x9A0+0x18)++0x03
line.long 0x00 "DTXFST5,Device IN Endpoint 5 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x9A0+0x1C)++0x03
line.long 0x00 "DIEPDMAB5,Device IN Endpoint 5 Buffer Address Register"
else
hgroup.long (0x9A0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB5,Device IN Endpoint 5 Buffer Address Register"
endif
group.long 0x9C0++0x03
line.long 0x00 "DIEPCTL6,Device Control IN Endpoint 6 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x9C0+0x08)++0x03
line.long 0x00 "DIEPINT6,Device IN Endpoint 6 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x9C0+0x08)++0x03
line.long 0x00 "DIEPINT6,Device IN Endpoint 6 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x9C0+0x10)++0x07
line.long 0x00 "DIEPTSIZ6,Device IN Endpoint 6 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA6,Device IN Endpoint 6 DMA Address Register"
rgroup.long (0x9C0+0x18)++0x03
line.long 0x00 "DTXFST6,Device IN Endpoint 6 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x9C0+0x1C)++0x03
line.long 0x00 "DIEPDMAB6,Device IN Endpoint 6 Buffer Address Register"
else
hgroup.long (0x9C0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB6,Device IN Endpoint 6 Buffer Address Register"
endif
group.long 0x9E0++0x03
line.long 0x00 "DIEPCTL7,Device Control IN Endpoint 7 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0x9E0+0x08)++0x03
line.long 0x00 "DIEPINT7,Device IN Endpoint 7 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x9E0+0x08)++0x03
line.long 0x00 "DIEPINT7,Device IN Endpoint 7 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x9E0+0x10)++0x07
line.long 0x00 "DIEPTSIZ7,Device IN Endpoint 7 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA7,Device IN Endpoint 7 DMA Address Register"
rgroup.long (0x9E0+0x18)++0x03
line.long 0x00 "DTXFST7,Device IN Endpoint 7 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x9E0+0x1C)++0x03
line.long 0x00 "DIEPDMAB7,Device IN Endpoint 7 Buffer Address Register"
else
hgroup.long (0x9E0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB7,Device IN Endpoint 7 Buffer Address Register"
endif
group.long 0xA00++0x03
line.long 0x00 "DIEPCTL8,Device Control IN Endpoint 8 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xA00+0x08)++0x03
line.long 0x00 "DIEPINT8,Device IN Endpoint 8 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA00+0x08)++0x03
line.long 0x00 "DIEPINT8,Device IN Endpoint 8 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA00+0x10)++0x07
line.long 0x00 "DIEPTSIZ8,Device IN Endpoint 8 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA8,Device IN Endpoint 8 DMA Address Register"
rgroup.long (0xA00+0x18)++0x03
line.long 0x00 "DTXFST8,Device IN Endpoint 8 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA00+0x1C)++0x03
line.long 0x00 "DIEPDMAB8,Device IN Endpoint 8 Buffer Address Register"
else
hgroup.long (0xA00+0x1C)++0x03
hide.long 0x00 "DIEPDMAB8,Device IN Endpoint 8 Buffer Address Register"
endif
group.long 0xA20++0x03
line.long 0x00 "DIEPCTL9,Device Control IN Endpoint 9 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xA20+0x08)++0x03
line.long 0x00 "DIEPINT9,Device IN Endpoint 9 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA20+0x08)++0x03
line.long 0x00 "DIEPINT9,Device IN Endpoint 9 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA20+0x10)++0x07
line.long 0x00 "DIEPTSIZ9,Device IN Endpoint 9 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA9,Device IN Endpoint 9 DMA Address Register"
rgroup.long (0xA20+0x18)++0x03
line.long 0x00 "DTXFST9,Device IN Endpoint 9 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA20+0x1C)++0x03
line.long 0x00 "DIEPDMAB9,Device IN Endpoint 9 Buffer Address Register"
else
hgroup.long (0xA20+0x1C)++0x03
hide.long 0x00 "DIEPDMAB9,Device IN Endpoint 9 Buffer Address Register"
endif
group.long 0xA40++0x03
line.long 0x00 "DIEPCTL10,Device Control IN Endpoint 10 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xA40+0x08)++0x03
line.long 0x00 "DIEPINT10,Device IN Endpoint 10 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA40+0x08)++0x03
line.long 0x00 "DIEPINT10,Device IN Endpoint 10 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA40+0x10)++0x07
line.long 0x00 "DIEPTSIZ10,Device IN Endpoint 10 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA10,Device IN Endpoint 10 DMA Address Register"
rgroup.long (0xA40+0x18)++0x03
line.long 0x00 "DTXFST10,Device IN Endpoint 10 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA40+0x1C)++0x03
line.long 0x00 "DIEPDMAB10,Device IN Endpoint 10 Buffer Address Register"
else
hgroup.long (0xA40+0x1C)++0x03
hide.long 0x00 "DIEPDMAB10,Device IN Endpoint 10 Buffer Address Register"
endif
group.long 0xA60++0x03
line.long 0x00 "DIEPCTL11,Device Control IN Endpoint 11 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xA60+0x08)++0x03
line.long 0x00 "DIEPINT11,Device IN Endpoint 11 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA60+0x08)++0x03
line.long 0x00 "DIEPINT11,Device IN Endpoint 11 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA60+0x10)++0x07
line.long 0x00 "DIEPTSIZ11,Device IN Endpoint 11 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA11,Device IN Endpoint 11 DMA Address Register"
rgroup.long (0xA60+0x18)++0x03
line.long 0x00 "DTXFST11,Device IN Endpoint 11 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA60+0x1C)++0x03
line.long 0x00 "DIEPDMAB11,Device IN Endpoint 11 Buffer Address Register"
else
hgroup.long (0xA60+0x1C)++0x03
hide.long 0x00 "DIEPDMAB11,Device IN Endpoint 11 Buffer Address Register"
endif
group.long 0xA80++0x03
line.long 0x00 "DIEPCTL12,Device Control IN Endpoint 12 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xA80+0x08)++0x03
line.long 0x00 "DIEPINT12,Device IN Endpoint 12 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA80+0x08)++0x03
line.long 0x00 "DIEPINT12,Device IN Endpoint 12 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA80+0x10)++0x07
line.long 0x00 "DIEPTSIZ12,Device IN Endpoint 12 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA12,Device IN Endpoint 12 DMA Address Register"
rgroup.long (0xA80+0x18)++0x03
line.long 0x00 "DTXFST12,Device IN Endpoint 12 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA80+0x1C)++0x03
line.long 0x00 "DIEPDMAB12,Device IN Endpoint 12 Buffer Address Register"
else
hgroup.long (0xA80+0x1C)++0x03
hide.long 0x00 "DIEPDMAB12,Device IN Endpoint 12 Buffer Address Register"
endif
group.long 0xAA0++0x03
line.long 0x00 "DIEPCTL13,Device Control IN Endpoint 13 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xAA0+0x08)++0x03
line.long 0x00 "DIEPINT13,Device IN Endpoint 13 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xAA0+0x08)++0x03
line.long 0x00 "DIEPINT13,Device IN Endpoint 13 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xAA0+0x10)++0x07
line.long 0x00 "DIEPTSIZ13,Device IN Endpoint 13 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA13,Device IN Endpoint 13 DMA Address Register"
rgroup.long (0xAA0+0x18)++0x03
line.long 0x00 "DTXFST13,Device IN Endpoint 13 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xAA0+0x1C)++0x03
line.long 0x00 "DIEPDMAB13,Device IN Endpoint 13 Buffer Address Register"
else
hgroup.long (0xAA0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB13,Device IN Endpoint 13 Buffer Address Register"
endif
group.long 0xAC0++0x03
line.long 0x00 "DIEPCTL14,Device Control IN Endpoint 14 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xAC0+0x08)++0x03
line.long 0x00 "DIEPINT14,Device IN Endpoint 14 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xAC0+0x08)++0x03
line.long 0x00 "DIEPINT14,Device IN Endpoint 14 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xAC0+0x10)++0x07
line.long 0x00 "DIEPTSIZ14,Device IN Endpoint 14 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA14,Device IN Endpoint 14 DMA Address Register"
rgroup.long (0xAC0+0x18)++0x03
line.long 0x00 "DTXFST14,Device IN Endpoint 14 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xAC0+0x1C)++0x03
line.long 0x00 "DIEPDMAB14,Device IN Endpoint 14 Buffer Address Register"
else
hgroup.long (0xAC0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB14,Device IN Endpoint 14 Buffer Address Register"
endif
group.long 0xAE0++0x03
line.long 0x00 "DIEPCTL15,Device Control IN Endpoint 15 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xAE0+0x08)++0x03
line.long 0x00 "DIEPINT15,Device IN Endpoint 15 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xAE0+0x08)++0x03
line.long 0x00 "DIEPINT15,Device IN Endpoint 15 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xAE0+0x10)++0x07
line.long 0x00 "DIEPTSIZ15,Device IN Endpoint 15 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA15,Device IN Endpoint 15 DMA Address Register"
rgroup.long (0xAE0+0x18)++0x03
line.long 0x00 "DTXFST15,Device IN Endpoint 15 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xAE0+0x1C)++0x03
line.long 0x00 "DIEPDMAB15,Device IN Endpoint 15 Buffer Address Register"
else
hgroup.long (0xAE0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB15,Device IN Endpoint 15 Buffer Address Register"
endif
group.long 0xB00++0x03
line.long 0x00 "DOEPCTL0,Device Control OUT Endpoint 0 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xB00+0x08)++0x03
line.long 0x00 "DOEPINT0,Device OUT Endpoint 0 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB00+0x08)++0x03
line.long 0x00 "DOEPINT0,Device OUT Endpoint 0 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB00+0x10)++0x07
line.long 0x00 "DOEPTSIZ0,Device OUT Endpoint 0 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA0,Device OUT Endpoint 0 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB00+0x1C)++0x03
line.long 0x00 "DOEPDMAB0,Device OUT Endpoint 0 Buffer Address Register"
else
hgroup.long (0xB00+0x1C)++0x03
hide.long 0x00 "DOEPDMAB0,Device OUT Endpoint 0 Buffer Address Register"
endif
group.long 0xB20++0x03
line.long 0x00 "DOEPCTL1,Device Control OUT Endpoint 1 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xB20+0x08)++0x03
line.long 0x00 "DOEPINT1,Device OUT Endpoint 1 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB20+0x08)++0x03
line.long 0x00 "DOEPINT1,Device OUT Endpoint 1 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB20+0x10)++0x07
line.long 0x00 "DOEPTSIZ1,Device OUT Endpoint 1 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA1,Device OUT Endpoint 1 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB20+0x1C)++0x03
line.long 0x00 "DOEPDMAB1,Device OUT Endpoint 1 Buffer Address Register"
else
hgroup.long (0xB20+0x1C)++0x03
hide.long 0x00 "DOEPDMAB1,Device OUT Endpoint 1 Buffer Address Register"
endif
group.long 0xB40++0x03
line.long 0x00 "DOEPCTL2,Device Control OUT Endpoint 2 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xB40+0x08)++0x03
line.long 0x00 "DOEPINT2,Device OUT Endpoint 2 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB40+0x08)++0x03
line.long 0x00 "DOEPINT2,Device OUT Endpoint 2 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB40+0x10)++0x07
line.long 0x00 "DOEPTSIZ2,Device OUT Endpoint 2 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA2,Device OUT Endpoint 2 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB40+0x1C)++0x03
line.long 0x00 "DOEPDMAB2,Device OUT Endpoint 2 Buffer Address Register"
else
hgroup.long (0xB40+0x1C)++0x03
hide.long 0x00 "DOEPDMAB2,Device OUT Endpoint 2 Buffer Address Register"
endif
group.long 0xB60++0x03
line.long 0x00 "DOEPCTL3,Device Control OUT Endpoint 3 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xB60+0x08)++0x03
line.long 0x00 "DOEPINT3,Device OUT Endpoint 3 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB60+0x08)++0x03
line.long 0x00 "DOEPINT3,Device OUT Endpoint 3 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB60+0x10)++0x07
line.long 0x00 "DOEPTSIZ3,Device OUT Endpoint 3 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA3,Device OUT Endpoint 3 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB60+0x1C)++0x03
line.long 0x00 "DOEPDMAB3,Device OUT Endpoint 3 Buffer Address Register"
else
hgroup.long (0xB60+0x1C)++0x03
hide.long 0x00 "DOEPDMAB3,Device OUT Endpoint 3 Buffer Address Register"
endif
group.long 0xB80++0x03
line.long 0x00 "DOEPCTL4,Device Control OUT Endpoint 4 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xB80+0x08)++0x03
line.long 0x00 "DOEPINT4,Device OUT Endpoint 4 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB80+0x08)++0x03
line.long 0x00 "DOEPINT4,Device OUT Endpoint 4 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB80+0x10)++0x07
line.long 0x00 "DOEPTSIZ4,Device OUT Endpoint 4 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA4,Device OUT Endpoint 4 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB80+0x1C)++0x03
line.long 0x00 "DOEPDMAB4,Device OUT Endpoint 4 Buffer Address Register"
else
hgroup.long (0xB80+0x1C)++0x03
hide.long 0x00 "DOEPDMAB4,Device OUT Endpoint 4 Buffer Address Register"
endif
group.long 0xBA0++0x03
line.long 0x00 "DOEPCTL5,Device Control OUT Endpoint 5 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xBA0+0x08)++0x03
line.long 0x00 "DOEPINT5,Device OUT Endpoint 5 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xBA0+0x08)++0x03
line.long 0x00 "DOEPINT5,Device OUT Endpoint 5 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xBA0+0x10)++0x07
line.long 0x00 "DOEPTSIZ5,Device OUT Endpoint 5 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA5,Device OUT Endpoint 5 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xBA0+0x1C)++0x03
line.long 0x00 "DOEPDMAB5,Device OUT Endpoint 5 Buffer Address Register"
else
hgroup.long (0xBA0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB5,Device OUT Endpoint 5 Buffer Address Register"
endif
group.long 0xBC0++0x03
line.long 0x00 "DOEPCTL6,Device Control OUT Endpoint 6 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xBC0+0x08)++0x03
line.long 0x00 "DOEPINT6,Device OUT Endpoint 6 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xBC0+0x08)++0x03
line.long 0x00 "DOEPINT6,Device OUT Endpoint 6 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xBC0+0x10)++0x07
line.long 0x00 "DOEPTSIZ6,Device OUT Endpoint 6 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA6,Device OUT Endpoint 6 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xBC0+0x1C)++0x03
line.long 0x00 "DOEPDMAB6,Device OUT Endpoint 6 Buffer Address Register"
else
hgroup.long (0xBC0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB6,Device OUT Endpoint 6 Buffer Address Register"
endif
group.long 0xBE0++0x03
line.long 0x00 "DOEPCTL7,Device Control OUT Endpoint 7 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xBE0+0x08)++0x03
line.long 0x00 "DOEPINT7,Device OUT Endpoint 7 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xBE0+0x08)++0x03
line.long 0x00 "DOEPINT7,Device OUT Endpoint 7 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xBE0+0x10)++0x07
line.long 0x00 "DOEPTSIZ7,Device OUT Endpoint 7 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA7,Device OUT Endpoint 7 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xBE0+0x1C)++0x03
line.long 0x00 "DOEPDMAB7,Device OUT Endpoint 7 Buffer Address Register"
else
hgroup.long (0xBE0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB7,Device OUT Endpoint 7 Buffer Address Register"
endif
group.long 0xC00++0x03
line.long 0x00 "DOEPCTL8,Device Control OUT Endpoint 8 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xC00+0x08)++0x03
line.long 0x00 "DOEPINT8,Device OUT Endpoint 8 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC00+0x08)++0x03
line.long 0x00 "DOEPINT8,Device OUT Endpoint 8 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC00+0x10)++0x07
line.long 0x00 "DOEPTSIZ8,Device OUT Endpoint 8 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA8,Device OUT Endpoint 8 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC00+0x1C)++0x03
line.long 0x00 "DOEPDMAB8,Device OUT Endpoint 8 Buffer Address Register"
else
hgroup.long (0xC00+0x1C)++0x03
hide.long 0x00 "DOEPDMAB8,Device OUT Endpoint 8 Buffer Address Register"
endif
group.long 0xC20++0x03
line.long 0x00 "DOEPCTL9,Device Control OUT Endpoint 9 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xC20+0x08)++0x03
line.long 0x00 "DOEPINT9,Device OUT Endpoint 9 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC20+0x08)++0x03
line.long 0x00 "DOEPINT9,Device OUT Endpoint 9 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC20+0x10)++0x07
line.long 0x00 "DOEPTSIZ9,Device OUT Endpoint 9 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA9,Device OUT Endpoint 9 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC20+0x1C)++0x03
line.long 0x00 "DOEPDMAB9,Device OUT Endpoint 9 Buffer Address Register"
else
hgroup.long (0xC20+0x1C)++0x03
hide.long 0x00 "DOEPDMAB9,Device OUT Endpoint 9 Buffer Address Register"
endif
group.long 0xC40++0x03
line.long 0x00 "DOEPCTL10,Device Control OUT Endpoint 10 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xC40+0x08)++0x03
line.long 0x00 "DOEPINT10,Device OUT Endpoint 10 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC40+0x08)++0x03
line.long 0x00 "DOEPINT10,Device OUT Endpoint 10 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC40+0x10)++0x07
line.long 0x00 "DOEPTSIZ10,Device OUT Endpoint 10 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA10,Device OUT Endpoint 10 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC40+0x1C)++0x03
line.long 0x00 "DOEPDMAB10,Device OUT Endpoint 10 Buffer Address Register"
else
hgroup.long (0xC40+0x1C)++0x03
hide.long 0x00 "DOEPDMAB10,Device OUT Endpoint 10 Buffer Address Register"
endif
group.long 0xC60++0x03
line.long 0x00 "DOEPCTL11,Device Control OUT Endpoint 11 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xC60+0x08)++0x03
line.long 0x00 "DOEPINT11,Device OUT Endpoint 11 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC60+0x08)++0x03
line.long 0x00 "DOEPINT11,Device OUT Endpoint 11 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC60+0x10)++0x07
line.long 0x00 "DOEPTSIZ11,Device OUT Endpoint 11 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA11,Device OUT Endpoint 11 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC60+0x1C)++0x03
line.long 0x00 "DOEPDMAB11,Device OUT Endpoint 11 Buffer Address Register"
else
hgroup.long (0xC60+0x1C)++0x03
hide.long 0x00 "DOEPDMAB11,Device OUT Endpoint 11 Buffer Address Register"
endif
group.long 0xC80++0x03
line.long 0x00 "DOEPCTL12,Device Control OUT Endpoint 12 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xC80+0x08)++0x03
line.long 0x00 "DOEPINT12,Device OUT Endpoint 12 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC80+0x08)++0x03
line.long 0x00 "DOEPINT12,Device OUT Endpoint 12 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC80+0x10)++0x07
line.long 0x00 "DOEPTSIZ12,Device OUT Endpoint 12 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA12,Device OUT Endpoint 12 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC80+0x1C)++0x03
line.long 0x00 "DOEPDMAB12,Device OUT Endpoint 12 Buffer Address Register"
else
hgroup.long (0xC80+0x1C)++0x03
hide.long 0x00 "DOEPDMAB12,Device OUT Endpoint 12 Buffer Address Register"
endif
group.long 0xCA0++0x03
line.long 0x00 "DOEPCTL13,Device Control OUT Endpoint 13 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xCA0+0x08)++0x03
line.long 0x00 "DOEPINT13,Device OUT Endpoint 13 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xCA0+0x08)++0x03
line.long 0x00 "DOEPINT13,Device OUT Endpoint 13 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xCA0+0x10)++0x07
line.long 0x00 "DOEPTSIZ13,Device OUT Endpoint 13 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA13,Device OUT Endpoint 13 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xCA0+0x1C)++0x03
line.long 0x00 "DOEPDMAB13,Device OUT Endpoint 13 Buffer Address Register"
else
hgroup.long (0xCA0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB13,Device OUT Endpoint 13 Buffer Address Register"
endif
group.long 0xCC0++0x03
line.long 0x00 "DOEPCTL14,Device Control OUT Endpoint 14 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xCC0+0x08)++0x03
line.long 0x00 "DOEPINT14,Device OUT Endpoint 14 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xCC0+0x08)++0x03
line.long 0x00 "DOEPINT14,Device OUT Endpoint 14 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xCC0+0x10)++0x07
line.long 0x00 "DOEPTSIZ14,Device OUT Endpoint 14 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA14,Device OUT Endpoint 14 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xCC0+0x1C)++0x03
line.long 0x00 "DOEPDMAB14,Device OUT Endpoint 14 Buffer Address Register"
else
hgroup.long (0xCC0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB14,Device OUT Endpoint 14 Buffer Address Register"
endif
group.long 0xCE0++0x03
line.long 0x00 "DOEPCTL15,Device Control OUT Endpoint 15 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
group.long (0xCE0+0x08)++0x03
line.long 0x00 "DOEPINT15,Device OUT Endpoint 15 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xCE0+0x08)++0x03
line.long 0x00 "DOEPINT15,Device OUT Endpoint 15 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xCE0+0x10)++0x07
line.long 0x00 "DOEPTSIZ15,Device OUT Endpoint 15 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA15,Device OUT Endpoint 15 DMA Address Register"
if (((per.l(ad:0xFFB00000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xCE0+0x1C)++0x03
line.long 0x00 "DOEPDMAB15,Device OUT Endpoint 15 Buffer Address Register"
else
hgroup.long (0xCE0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB15,Device OUT Endpoint 15 Buffer Address Register"
endif
group.long 0xE00++0x03
line.long 0x00 "PCGCCTL,Power And Clock Gating Control Register"
rbitfld.long 0x00 7. " L1SUSPENDED         ,L1 deep sleep" "Non deep sleep,Deep sleep"
rbitfld.long 0x00 6. "        PHYSLEEP       ,PHY in sleep" "Not in sleep state,In sleep state"
bitfld.long 0x00 3. "  RSTPDWNMODULE  ,Reset power-down modules" "On,Off"
newline
bitfld.long 0x00 0. " STOPPCLK            ,Stop PHY clock" "Disabled,Enabled"
group.long 0x1000++0x03
line.long 0x00 "DWC_OTG_DFIFO,DWC OTG DFIFO"
button "Data" "d (ad:0xFFB00000+0x1000)--(ad:0xFFB00000+0x10FFF) /long"
width 0x0B
tree.end
tree "USBOTG 1"
base ad:0xFFB40000
width 15.
if (((per.l(ad:0xFFB40000))&0x200000)==0x00)
group.long 0x00++0x07
line.long 0x00 "GOTGCTL,OTG Control And Status Register"
rbitfld.long 0x00 21. " CURMOD           ,Current mode of operation" "Device,Host"
bitfld.long 0x00 20. "        OTGVER         ,OTG version" "1.3,2.0"
rbitfld.long 0x00 19. "               BSESVLD          ,B-session valid" "Not valid,Valid"
rbitfld.long 0x00 16. "         CONIDSTS             ,Connector ID status" "A-device,B-device"
newline
bitfld.long 0x00 12. " EHEN             ,Embedded host enable" "Disabled,Enabled"
bitfld.long 0x00 11. "      DEVHNPEN       ,Device HNP enable" "Disabled,Enabled"
bitfld.long 0x00 9. "          HNPREQ           ,HNP request" "Not requested,Requested"
rbitfld.long 0x00 8. "     HSTNEGSCS            ,Host negotiation success" "Failed,Succeed"
newline
bitfld.long 0x00 7. " BVALIDOVVAL      ,B-peripheral session valid override value" "0,1"
bitfld.long 0x00 6. "             BVALIDOVEN     ,B-peripheral session valid override enable" "Disabled,Enabled"
bitfld.long 0x00 5. "          AVALIDOVVAL      ,A-peripheral session valid override value" "0,1"
bitfld.long 0x00 4. "                 AVALIDOVEN           ,A-peripheral session valid override enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " VBVALIDOVVAL     ,VBUS valid override value" "0,1"
bitfld.long 0x00 2. "             VBVALIDOVEN    ,VBUS valid override enable" "Disabled,Enabled"
bitfld.long 0x00 1. "          SESREQ           ,Session request" "Not requested,Requested"
rbitfld.long 0x00 0. "     SESREQSCS            ,Session request success" "Failed,Succeeded"
line.long 0x04 "GOTGINT,OTG Interrupt Register"
eventfld.long 0x04 18. " ADEVTOUTCHG      ,A-device timeout change" "No timeout,Timeout"
eventfld.long 0x04 17. "    HSTNEGDET      ,Host negotiation detection" "Not detected,Detected"
eventfld.long 0x04 9. "      HSTNEGSUCSTSCHNG ,Host negotiation success status change" "Not changed,Changed"
eventfld.long 0x04 8. "       SESREQSUCSTSCHNG     ,Session request success status change" "Not changed,Changed"
newline
eventfld.long 0x04 2. " SESENDDET        ,Session end detection" "Not detected,Detected"
if (((per.l(ad:0xFFB40000+0x08))&0x200000)==0x200000)
group.long 0x08++0x03
line.long 0x00 "GAHBCFG,AHC Configuration Register"
bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert descriptor endianness" "Same,Opposite"
bitfld.long 0x00 23. "      AHBSINGLE      ,AHB single support" "INCR,Single"
bitfld.long 0x00 22. "            NOTIALLDMAWAIT   ,Notify all DMA write transaction" "Last,All"
newline
bitfld.long 0x00 21. " REMMEMSUPP       ,Remote memory support" "Disabled,Enabled"
newline
bitfld.long 0x00 7. " NPTXFEMPLVL      ,Non-periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 5. "    DMAEN          ,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 1.--4. "          HBSTLEN          ,Burst length/type" "1 word/Single,4 words/INCR,8 words/-,16 words/INCR4,32 words/-,64 words/INCR8,128 words/-,256 words/INCR16,?..."
bitfld.long 0x00 0. "  GLBLINTRMSK          ,Global interrupt mask" "Masked,Not masked"
newline
else
group.long 0x08++0x03
line.long 0x00 "GAHBCFG,AHC Configuration Register"
bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert descriptor endianness" "Same,Opposite"
bitfld.long 0x00 23. "      AHBSINGLE      ,AHB single support" "INCR,Single"
newline
bitfld.long 0x00 21. " REMMEMSUPP       ,Remote memory support" "Disabled,Enabled"
newline
bitfld.long 0x00 7. " NPTXFEMPLVL      ,Non-periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 5. "    DMAEN          ,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 1.--4. "          HBSTLEN          ,Burst length/type" "1 word/Single,4 words/INCR,8 words/-,16 words/INCR4,32 words/-,64 words/INCR8,128 words/-,256 words/INCR16,?..."
bitfld.long 0x00 0. "  GLBLINTRMSK          ,Global interrupt mask" "Masked,Not masked"
newline
endif
group.long 0x0C++0x0F
line.long 0x00 "GUSBCFG,USB Configuration Register"
bitfld.long 0x00 31. " CORRUPTTXPKT     ,Corrupt TX packet" "Normal,Debug"
bitfld.long 0x00 30. "        FORCEDEVMODE   ,Force device mode" "Normal,Force device"
bitfld.long 0x00 29. "      FORCEHSTMODE     ,Force host mode" "Normal,Force host"
bitfld.long 0x00 28. "        TXENDDELAY           ,TX end delay" "Normal,TX end"
newline
rbitfld.long 0x00 26. " IC_USBCAP        ,IC_USB-capable" "Not selected,Selected"
bitfld.long 0x00 22. "  TERMSELDLPULSE ,TermSel DLine pulsing selection" "Utmi_txvalid,Utmi_termsel"
bitfld.long 0x00 19. "      ULPICLKSUSM      ,ULPI clock suspendM" "Powered down,Powered up"
bitfld.long 0x00 18. "      ULPIAUTORES          ,ULPI auto resume enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10.--13. " USBTRDTIM        ,USB turnaround time in PHY clocks" ",,,,,16-bit,,,,8-bit,?..."
bitfld.long 0x00 9. "        HNPCAP         ,HNP-capable" "Disabled,Enabled"
bitfld.long 0x00 8. "          SRPCAP           ,SRP-capable" "Disabled,Enabled"
bitfld.long 0x00 7. "          DDRSEL               ,ULPI DDR select" "Single,Double"
newline
bitfld.long 0x00 6. " PHYSEL           ,Transceiver select" "2.0,1.1"
rbitfld.long 0x00 5. "           FSINTF         ,Full-speed serial interface select" "6-pin,3-pin"
rbitfld.long 0x00 4. "             ULPI_UTMI_SEL    ,ULPI or UTMI+ select" "UTMI+,ULPI"
rbitfld.long 0x00 3. "             PHYIF                ,PHY interface" "8bit,16bit"
newline
bitfld.long 0x00 0.--2. " TOUTCAL          ,HS/FS timeout calibration" "0,1,2,3,4,5,6,7"
newline
line.long 0x04 "GRSTCTL,Reset Register"
rbitfld.long 0x04 31. " AHBIDLE     ,AHB master idle" "Not idle,Idle"
rbitfld.long 0x04 30. "     DMAREQ  ,DMA request signal" "Not requested,Requested"
bitfld.long 0x04 6.--10. "  TXFNUM      ,TXFIFO number" "Non-periodic TXFIFO,Periodic TXFIFO,Periodic TXFIFO 2,Periodic TXFIFO 3,Periodic TXFIFO 4,Periodic TXFIFO 5,Periodic TXFIFO 6,Periodic TXFIFO 7,Periodic TXFIFO 8,Periodic TXFIFO 9,Periodic TXFIFO 10,Periodic TXFIFO 11,Periodic TXFIFO 12,Periodic TXFIFO 13,Periodic TXFIXO 14,Periodic TXFIFO 15,Flush all,?..."
newline
bitfld.long 0x04 5. " TXFFLSH     ,TXFIFO flush" "Not flushed,Flushed"
bitfld.long 0x04 4. "  RXFFLSH ,RXFIFO flush" "Not flushed,Flushed"
bitfld.long 0x04 1. "    PIUFSSFTRST ,PIU FS dedicated controller soft reset" "No reset,Reset"
newline
bitfld.long 0x04 0. " CSFTRST     ,Core soft reset" "No reset,Reset"
newline
line.long 0x08 "GINTSTS,Interrupt Register"
bitfld.long 0x08 31. " WKUPINT       ,Resume/remote wakeup detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 30. "   SESSREQINT    ,Session request/new session detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 28. "   CONIDSTSCHNG  ,Connector ID status change" "Not changed,Changed"
bitfld.long 0x08 23. "    RESETDET        ,Reset detected interrupt" "No reset,Reset"
newline
bitfld.long 0x08 22. " FETSUSP       ,Data fetch suspended" "Not suspended,Suspended"
bitfld.long 0x08 21. "  INCOMPLP      ,Incomplete periodic transfer" "Not active,Incomplete"
bitfld.long 0x08 20. "     INCOMPISOIN   ,Incomplete isochronous IN transfer" "Not active,Incomplete"
rbitfld.long 0x08 19. "     OEPINT          ,OUT endpoint interrupt" "No interrupt,Interrupt"
newline
rbitfld.long 0x08 18. " IEPINT        ,IN endpoint interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 17. "   EPMIS         ,Endpoint mismatch interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 15. "   EOFF          ,End of periodic frame interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 14. "   ISOOUTDROP      ,Isochronous OUT packet dropped interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x08 13. " ENUMDONE      ,Enumeration done" "Not done,Done"
bitfld.long 0x08 12. "       USBRST        ,USB reset" "No reset,Reset"
bitfld.long 0x08 11. "       USBSUSP       ,USB suspend" "Not suspended,Suspended"
bitfld.long 0x08 10. "  ERLYSUSP        ,Early suspend" "Not suspended,Suspended"
newline
rbitfld.long 0x08 7. " GOUTNAKEFF    ,Global OUT NAK effective" "Not effective,Effective"
rbitfld.long 0x08 6. "  GINNAKEFF     ,Global IN non-periodic NAK effective" "Not effective,Effective"
rbitfld.long 0x08 5. "  NPTXFEMP      ,Non-periodic TXFIFO empty" "Not empty,Empty"
rbitfld.long 0x08 4. "      TXFLVL          ,RXFIFO non-empty" "Empty,Not empty"
newline
bitfld.long 0x08 3. " SOF           ,Start of frame" "Not started,Started"
rbitfld.long 0x08 2. "    OTGINT        ,OTG interrupt" "No interrupt,Interrupt"
eventfld.long 0x08 1. "   MODEMIS       ,Mode mismatch interrupt" "No interrupt,Interrupt"
rbitfld.long 0x08 0. "   CURMOD          ,Current mode of operation" "Device,Host"
line.long 0x0C "GINTMSK,Interrupt Mask Register"
bitfld.long 0x0C 31. " WKUPINTMSK    ,Resume/remote wakeup detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 30. "     SESSREQINTMSK ,Session request/new session detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 29. "     DISCONNINTMSK ,Disconnect detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 28. "     CONIDSTSCHNGMSK ,Connector ID status change mask" "Masked,Not masked"
newline
bitfld.long 0x0C 23. " RESETDETMSK   ,Reset detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 22. "     FETSUSPMSK    ,Data fetch suspended mask" "Masked,Not masked"
bitfld.long 0x0C 21. "     INCOMPLPMSK   ,Incomplete isochronous OUT transfer interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 20. "     INCOMPISOINMSK  ,Incomplete isochronous IN transfer mask" "Masked,Not masked"
newline
bitfld.long 0x0C 19. " OEPINTMSK     ,OUT endpoints interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 18. "     IEPINTMSK     ,IN endpoints interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 17. "     EPMISMSK      ,Endpoint mismatch interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 15. "     EOPFMSK         ,End of periodic frame interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x0C 14. " ISOOUTDROPMSK ,Isochronous OUT packet dropped interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 13. "     ENUMDONEMSK   ,Enumeration done mask" "Masked,Not masked"
bitfld.long 0x0C 12. "     USBRSTMSK     ,USB reset mask" "Masked,Not masked"
bitfld.long 0x0C 11. "     USBSUSPMSK      ,USB suspend mask" "Masked,Not masked"
newline
bitfld.long 0x0C 10. " ERLYSUSPMSK   ,Early suspend mask" "Masked,Not masked"
bitfld.long 0x0C 7. "     GOUTNAKEFFMSK ,Global OUT NAK effective mask" "Masked,Not masked"
bitfld.long 0x0C 6. "     GINNAKEFFMSK  ,Global non-periodic IN NAK effective mask" "Masked,Not masked"
bitfld.long 0x0C 5. "     NPTXFEMPMSK     ,Non-periodic TXFIFO empty mask" "Masked,Not masked"
newline
bitfld.long 0x0C 4. " RXFLVLMSK     ,Receive FIFO non-empty mask" "Masked,Not masked"
bitfld.long 0x0C 3. "     SOFMSK        ,Start of frame mask" "Masked,Not masked"
bitfld.long 0x0C 2. "     OTGINTMSK     ,OTG interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 1. "     MODEMISMSK      ,Mode mismatch interrupt mask" "Masked,Not masked"
newline
rgroup.long 0x1C++0x07
line.long 0x00 "GRXSTSR,Receive Status Debug Read Register"
bitfld.long 0x00 21.--24. " FN              ,Frame number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 17.--20. "                               PKTSTS         ,Packet status" ",Global OUT NAK,OUT data packet received,OUT transfer completed,SETUP transaction completed,,SETUP data packet received,?..."
bitfld.long 0x00 15.--16. "  DPID                ,Data PID" "DATA0,DATA2,DATA1,MDATA"
newline
hexmask.long.word 0x00 4.--14. 1. " BCNT            ,Byte count"
bitfld.long 0x00 0.--3. "                             EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "GRXSTSP,Receive Status Read/Pop Register"
bitfld.long 0x04 21.--24. " FN              ,Frame number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 17.--20. "                               PKTSTS         ,Packet status" ",Global OUT NAK,OUT data packet received,OUT transfer completed,SETUP transaction completed,,SETUP data packet received,?..."
bitfld.long 0x04 15.--16. "  DPID                ,Data PID" "DATA0,DATA1,DATA2,MDATA"
newline
hexmask.long.word 0x04 4.--14. 1. " BCNT            ,Byte count"
bitfld.long 0x04 0.--3. "                             EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
group.long 0x00++0x03
line.long 0x00 "GOTGCTL,OTG Control And Status Register"
rbitfld.long 0x00 21. " CURMOD           ,Current mode of operation" "Device,Host"
bitfld.long 0x00 20. "        OTGVER         ,OTG version" "1.3,2.0"
rbitfld.long 0x00 18. "               ASESVLD          ,A-session valid" "Not valid,Valid"
rbitfld.long 0x00 17. "         DBNCTIME             ,Long/short debounce time" "Long,Short"
newline
rbitfld.long 0x00 16. " CONIDSTS         ,Connector ID status" "A-device,B-device"
bitfld.long 0x00 12. "      EHEN           ,Embedded host enable" "Disabled,Enabled"
bitfld.long 0x00 10. "          HSTSETHNPEN      ,Host set HNP enable" "Disabled,Enabled"
rbitfld.long 0x00 8. "          HSTNEGSCS            ,Host negotiation success" "Failed,Succeed"
newline
bitfld.long 0x00 7. " BVALIDOVVAL      ,B-peripheral session valid override value" "0,1"
bitfld.long 0x00 6. "             BVALIDOVEN     ,B-peripheral session valid override enable" "Disabled,Enabled"
bitfld.long 0x00 5. "          AVALIDOVVAL      ,A-peripheral session valid override value" "0,1"
bitfld.long 0x00 4. "                 AVALIDOVEN           ,A-peripheral session valid override enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " VBVALIDOVVAL     ,VBUS valid override value" "0,1"
bitfld.long 0x00 2. "             VBVALIDOVEN    ,VBUS valid override enable" "Disabled,Enabled"
if (((per.l(ad:0xFFB40000+0x0C))&0x300)!=0x00)
group.long 0x04++0x03
line.long 0x00 "GOTGINT,OTG Interrupt Register"
eventfld.long 0x00 19. " DBNCEDONE        ,Debounce done" "Not done,Done"
eventfld.long 0x00 18. "      ADEVTOUTCHG    ,A-device timeout change" "No timeout,Timeout"
eventfld.long 0x00 17. "        HSTNEGDET        ,Host negotiation detection" "Not detected,Detected"
eventfld.long 0x00 9. "      HSTNEGSUCSTSCHNG     ,Host negotiation success status change" "Not changed,Changed"
newline
eventfld.long 0x00 8. " SESREQSUCSTSCHNG ,Session request success status change" "Not changed,Changed"
eventfld.long 0x00 2. "   SESENDDET      ,Session end detection" "Not detected,Detected"
else
group.long 0x04++0x03
line.long 0x00 "GOTGINT,OTG Interrupt Register"
eventfld.long 0x00 18. " ADEVTOUTCHG      ,A-device timeout change" "No timeout,Timeout"
eventfld.long 0x00 17. "    HSTNEGDET      ,Host negotiation detection" "Not detected,Detected"
eventfld.long 0x00 9. "      HSTNEGSUCSTSCHNG ,Host negotiation success status change" "Not changed,Changed"
eventfld.long 0x00 8. "       SESREQSUCSTSCHNG     ,Session request success status change" "Not changed,Changed"
newline
eventfld.long 0x00 2. " SESENDDET        ,Session end detection" "Not detected,Detected"
endif
if (((per.l(ad:0xFFB40000+0x08))&0x200000)==0x200000)
group.long 0x08++0x03
line.long 0x00 "GAHBCFG,AHC Configuration Register"
bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert descriptor endianness" "Same,Opposite"
bitfld.long 0x00 23. "      AHBSINGLE      ,AHB single support" "INCR,Single"
bitfld.long 0x00 22. "            NOTIALLDMAWAIT   ,Notify all DMA write transaction" "Last,All"
newline
bitfld.long 0x00 21. " REMMEMSUPP       ,Remote memory support" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " PTXFEMPLVL       ,Periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 7. "    NPTXFEMPLVL    ,Non-periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 5. "        DMAEN            ,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 1.--4. "          HBSTLEN              ,Burst length/type" "1 word/Single,4 words/INCR,8 words/-,16 words/INCR4,32 words/-,64 words/INCR8,128 words/-,256 words/INCR16,?..."
newline
bitfld.long 0x00 0. " GLBLINTRMSK      ,Global interrupt mask" "Masked,Not masked"
else
group.long 0x08++0x03
line.long 0x00 "GAHBCFG,AHC Configuration Register"
bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert descriptor endianness" "Same,Opposite"
bitfld.long 0x00 23. "      AHBSINGLE      ,AHB single support" "INCR,Single"
newline
bitfld.long 0x00 21. " REMMEMSUPP       ,Remote memory support" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " PTXFEMPLVL       ,Periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 7. "    NPTXFEMPLVL    ,Non-periodic TXFIFO empty level" "Half empty,Empty"
bitfld.long 0x00 5. "        DMAEN            ,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 1.--4. "          HBSTLEN              ,Burst length/type" "1 word/Single,4 words/INCR,8 words/-,16 words/INCR4,32 words/-,64 words/INCR8,128 words/-,256 words/INCR16,?..."
newline
bitfld.long 0x00 0. " GLBLINTRMSK      ,Global interrupt mask" "Masked,Not masked"
endif
group.long 0x0C++0x0F
line.long 0x00 "GUSBCFG,USB Configuration Register"
bitfld.long 0x00 31. " CORRUPTTXPKT     ,Corrupt TX packet" "Normal,Debug"
bitfld.long 0x00 30. "        FORCEDEVMODE   ,Force device mode" "Normal,Force device"
bitfld.long 0x00 29. "      FORCEHSTMODE     ,Force host mode" "Normal,Force host"
rbitfld.long 0x00 26. "        IC_USBCAP            ,IC_USB-capable" "Not selected,Selected"
newline
bitfld.long 0x00 25. " ULPI             ,ULPI interface protect disable" "No,Yes"
bitfld.long 0x00 24. "           INDICATOR      ,Indicator pass through" "Qualified,Not qualified"
bitfld.long 0x00 23. "     COMPLEMENT       ,Indicator complement" "Not inverted,Inverted"
bitfld.long 0x00 21. "      ULPIEXTVBUSINDICATOR ,ULPI external VBUS indicator" "Internal,External"
newline
bitfld.long 0x00 20. " ULPIEXTVBUSDRV   ,ULPI external VBUS drive" "Internal,External"
bitfld.long 0x00 19. "      ULPICLKSUSM    ,ULPI clock suspendM" "Powered down,Powered up"
bitfld.long 0x00 18. "      ULPIAUTORES      ,ULPI auto resume enable" "Disabled,Enabled"
bitfld.long 0x00 9. "          HNPCAP               ,HNP-capable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. " SRPCAP           ,SRP-capable" "Disabled,Enabled"
bitfld.long 0x00 7. "      DDRSEL         ,ULPI DDR select" "Single,Double"
bitfld.long 0x00 6. "            PHYSEL           ,Transceiver select" "2.0,1.1"
rbitfld.long 0x00 5. "               FSINTF               ,Full-speed serial interface select" "6-pin,3-pin"
newline
rbitfld.long 0x00 4. " ULPI_UTMI_SEL    ,ULPI or UTMI+ select" "UTMI+,ULPI"
rbitfld.long 0x00 3. "         PHYIF          ,PHY interface" "8bit,16bit"
bitfld.long 0x00 0.--2. "             TOUTCAL          ,HS/FS timeout calibration" "0,1,2,3,4,5,6,7"
newline
line.long 0x04 "GRSTCTL,Reset Register"
rbitfld.long 0x04 31. " AHBIDLE     ,AHB master idle" "Not idle,Idle"
rbitfld.long 0x04 30. "     DMAREQ  ,DMA request signal" "Not requested,Requested"
bitfld.long 0x04 6.--10. "  TXFNUM      ,TXFIFO number" "Non-periodic TXFIFO,Periodic TXFIFO,,,,,,,,,,,,,,,Flush all,?..."
newline
bitfld.long 0x04 5. " TXFFLSH     ,TXFIFO flush" "Not flushed,Flushed"
bitfld.long 0x04 4. "  RXFFLSH ,RXFIFO flush" "Not flushed,Flushed"
bitfld.long 0x04 2. "    FRMCNTRRST  ,Host frame counter reset" "No reset,Reset"
newline
bitfld.long 0x04 1. " PIUFSSFTRST ,PIU FS dedicated controller soft reset" "No reset,Reset"
bitfld.long 0x04 0. "     CSFTRST ,Core soft reset" "No reset,Reset"
newline
line.long 0x08 "GINTSTS,Interrupt Register"
bitfld.long 0x08 31. " WKUPINT      ,Resume/remote wakeup detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 30. "  SESSREQINT    ,Session request/new session detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 29. "  DISCONNINT    ,Disconnect detected interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 28. "  CONIDSTSCHNG    ,Connector ID status change" "Not changed,Changed"
newline
rbitfld.long 0x08 26. " PTXFEMP      ,Periodic TXFIFO empty" "Not empty,Empty"
rbitfld.long 0x08 25. "     HCHINT        ,Host channels interrupt" "No interrupt,Interrupt"
rbitfld.long 0x08 24. "  PRTINT        ,Host port interrupt" "No interrupt,Interrupt"
bitfld.long 0x08 21. "  INCOMPLP        ,Incomplete periodic transfer" "Not active,Incomplete"
newline
rbitfld.long 0x08 5. " NPTXFEMP     ,Non-periodic TXFIFO empty" "Not empty,Empty"
rbitfld.long 0x08 4. "     TXFLVL        ,RXFIFO non-empty" "Empty,Not empty"
bitfld.long 0x08 3. "     SOF           ,Start of frame" "Not started,Started"
rbitfld.long 0x08 2. "   OTGINT          ,OTG interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x08 1. " MODEMIS      ,Mode mismatch interrupt" "No interrupt,Interrupt"
rbitfld.long 0x08 0. "  CURMOD        ,Current mode of operation" "Device,Host"
newline
newline
line.long 0x0C "GINTMSK,Interrupt Mask Register"
bitfld.long 0x0C 31. " WKUPINTMSK   ,Resume/remote wakeup detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 30. "    SESSREQINTMSK ,Session request/new session detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 29. "    DISCONNINTMSK ,Disconnect detected interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 28. "    CONIDSTSCHNGMSK ,Connector ID status change mask" "Masked,Not masked"
newline
bitfld.long 0x0C 26. " PTXFEMPMSK   ,Periodic TXFIFO empty mask" "Masked,Not masked"
bitfld.long 0x0C 25. "    HCHINTMSK     ,Host channels interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 24. "    PRTINTMSK     ,Host port interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 21. "    INCOMPLPMSK     ,Incomplete periodic transfer mask" "Masked,Not masked"
newline
bitfld.long 0x0C 6. " GINNAKEFFMSK ,Global non-periodic IN NAK effective mask" "Masked,Not masked"
bitfld.long 0x0C 5. "    NPTXFEMPMSK   ,Non-periodic TXFIFO empty mask" "Masked,Not masked"
bitfld.long 0x0C 4. "    RXFLVLMSK     ,Receive FIFO non-empty mask" "Masked,Not masked"
bitfld.long 0x0C 3. "    SOFMSK          ,Start of frame mask" "Masked,Not masked"
newline
bitfld.long 0x0C 2. " OTGINTMSK    ,OTG interrupt mask" "Masked,Not masked"
bitfld.long 0x0C 1. "    MODEMISMSK    ,Mode mismatch interrupt mask" "Masked,Not masked"
newline
newline
newline
rgroup.long 0x1C++0x07
line.long 0x00 "GRXSTSR,Receive Status Debug Read Register"
bitfld.long 0x00 17.--20. " PKTSTS          ,Packet status" ",,IN data packet received,IN transfer completed,,Data toggle error,,Channel halted,?..."
bitfld.long 0x00 15.--16. "          DPID           ,Data PID" "DATA0,DATA2,DATA1,MDATA"
hexmask.long.word 0x00 4.--14. 1. "                        BCNT                ,Byte count"
newline
bitfld.long 0x00 0.--3. " CHNUM           ,Channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "GRXSTSP,Receive Status Read/Pop Register"
bitfld.long 0x04 17.--20. " PKTSTS          ,Packet status" ",,IN data packet received,IN transfer completed,,Data toggle error,,Channel halted,?..."
bitfld.long 0x04 15.--16. "          DPID           ,Data PID" "DATA0,DATA1,DATA2,MDATA"
hexmask.long.word 0x04 4.--14. 1. "                        BCNT                ,Byte count"
newline
bitfld.long 0x04 0.--3. " CHNUM           ,Channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
group.long 0x24++0x03
line.long 0x00 "GRXFSIZ,Receive FIFO Size Register"
hexmask.long.word 0x00 0.--13. 1. " RXFDEP          ,RXFIFO depth"
if (((per.l(ad:0xFFB40000))&0x200000)==0x00)
group.long 0x28++0x03
line.long 0x00 "GNPTXFSIZ,Non-Periodic Transmit FIFO Size Register"
hexmask.long.word 0x00 16.--31. 1. " INEPTXF0DEP     ,IN endpoint TXFIFO 0 depth"
hexmask.long.word 0x00 0.--15. 0x01 "                             INEPTXF0STADDR ,IN endpoint FIFO 0 transmit RAM start address"
else
group.long 0x28++0x03
line.long 0x00 "GNPTXFSIZ,Non-Periodic Transmit FIFO Size Register"
hexmask.long.word 0x00 16.--31. 1. " NPTXFDEP        ,Non-periodic TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 "                             NPTXFSTADDR    ,Non-periodic transmit RAM start address"
endif
rgroup.long 0x2C++0x03
line.long 0x00 "GNPTXSTS,Non-Periodic Transmit FIFO/Queue Status Register"
bitfld.long 0x00 27.--30. " NPTXQTOP[6:3]   ,Channel/endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "                               NPTXQTOP[2:1]  ,TX request queue" "IN/OUT token,Zero-length transmit packet,PING/CSPLIT token,Channel halt"
bitfld.long 0x00 24. "  NPTXQTOP[0]         ,Terminate" "Not terminated,Terminated"
newline
bitfld.long 0x00 16.--23. " NPTXQSPCAVAIL   ,Non-periodic transmit request queue space available" "Full,1,2,3,4,5,6,7,8,?..."
hexmask.long.word 0x00 0.--15. 1. "                             NPTXFSPCAVAIL  ,Non-periodic TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x34))&0x8000000)==0x00)
group.long 0x34++0x03
line.long 0x00 "GPVNDCTL,PHY Vendor Control Register"
bitfld.long 0x00 31. " DISULPIDRVR     ,Disable ULPI drivers" "No,Yes"
bitfld.long 0x00 27. "                              VSTSDONE       ,VStatus done" "Not done,Done"
rbitfld.long 0x00 26. "                     VSTSBSY             ,VStatus busy" "Not busy,Busy"
newline
bitfld.long 0x00 25. " NEWREGREQ       ,New register request" "Not requested,Requested"
bitfld.long 0x00 22. "                    REGWR          ,Register write" "Read,Write"
hexmask.long.byte 0x00 16.--21. 0x01 "                        REGADDR             ,Register address"
newline
hexmask.long.byte 0x00 8.--15. 0x01 " VCTRL           ,UTMI+ vendor control register address"
else
group.long 0x34++0x03
line.long 0x00 "GPVNDCTL,PHY Vendor Control Register"
bitfld.long 0x00 31. " DISULPIDRVR     ,Disable ULPI drivers" "No,Yes"
bitfld.long 0x00 27. "                              VSTSDONE       ,VStatus done" "Not done,Done"
rbitfld.long 0x00 26. "                     VSTSBSY             ,VStatus busy" "Not busy,Busy"
newline
bitfld.long 0x00 25. " NEWREGREQ       ,New register request" "Not requested,Requested"
bitfld.long 0x00 22. "                    REGWR          ,Register write" "Read,Write"
hexmask.long.byte 0x00 16.--21. 0x01 "                        REGADDR             ,Register address"
newline
hexmask.long.byte 0x00 8.--15. 0x01 " VCTRL           ,UTMI+ vendor control register address"
hexmask.long.byte 0x00 0.--7. 1. "                               REGDATA        ,Register data"
endif
newline
group.long 0x38++0x07
line.long 0x00 "GGPIO,General Purpose Input/Output Register"
bitfld.long 0x00 31. " GPO[15] ,General purpose output 15" "Low,High"
bitfld.long 0x00 30. "  [14] ,General purpose output 14" "Low,High"
bitfld.long 0x00 29. "  [13] ,General purpose output 13" "Low,High"
bitfld.long 0x00 28. "  [12] ,General purpose output 12" "Low,High"
bitfld.long 0x00 27. "  [11] ,General purpose output 11" "Low,High"
bitfld.long 0x00 26. "  [10] ,General purpose output 10" "Low,High"
newline
bitfld.long 0x00 25. " [9]     ,General purpose output 9" "Low,High"
bitfld.long 0x00 24. "  [8]  ,General purpose output 8" "Low,High"
bitfld.long 0x00 23. "  [7]  ,General purpose output 7" "Low,High"
bitfld.long 0x00 22. "  [6]  ,General purpose output 6" "Low,High"
bitfld.long 0x00 21. "  [5]  ,General purpose output 5" "Low,High"
bitfld.long 0x00 20. "  [4]  ,General purpose output 4" "Low,High"
newline
bitfld.long 0x00 19. " [3]     ,General purpose output 3" "Low,High"
bitfld.long 0x00 18. "  [2]  ,General purpose output 2" "Low,High"
bitfld.long 0x00 17. "  [1]  ,General purpose output 1" "Low,High"
bitfld.long 0x00 16. "  [0]  ,General purpose output 0" "Low,High"
newline
bitfld.long 0x00 15. " GPI[15] ,General purpose input 15" "Low,High"
bitfld.long 0x00 14. "  [14] ,General purpose input 14" "Low,High"
bitfld.long 0x00 13. "  [13] ,General purpose input 13" "Low,High"
bitfld.long 0x00 12. "  [12] ,General purpose input 12" "Low,High"
bitfld.long 0x00 11. "  [11] ,General purpose input 11" "Low,High"
bitfld.long 0x00 10. "  [10] ,General purpose input 10" "Low,High"
newline
bitfld.long 0x00 9. " [9]     ,General purpose input 9" "Low,High"
bitfld.long 0x00 8. "  [8]  ,General purpose input 8" "Low,High"
bitfld.long 0x00 7. "  [7]  ,General purpose input 7" "Low,High"
bitfld.long 0x00 6. "  [6]  ,General purpose input 6" "Low,High"
bitfld.long 0x00 5. "  [5]  ,General purpose input 5" "Low,High"
bitfld.long 0x00 4. "  [4]  ,General purpose input 4" "Low,High"
newline
bitfld.long 0x00 3. " [3]     ,General purpose input 3" "Low,High"
bitfld.long 0x00 2. "  [2]  ,General purpose input 2" "Low,High"
bitfld.long 0x00 1. "  [1]  ,General purpose input 1" "Low,High"
bitfld.long 0x00 0. "  [0]  ,General purpose input 0" "Low,High"
newline
line.long 0x04 "GUID,User ID Register"
rgroup.long 0x40++0x13
line.long 0x00 "GSNPSID,Synopsys ID Register"
line.long 0x04 "GHWCFG1,User HW Config1 Register"
bitfld.long 0x04 30.--31. " EP15DIR         ,Endpoint 15 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 28.--29. "                            EP14DIR        ,Endpoint 14 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 26.--27. "                        EP13DIR             ,Endpoint 13 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 24.--25. " EP12DIR         ,Endpoint 12 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 22.--23. "                            EP11DIR        ,Endpoint 11 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 20.--21. "                        EP10DIR             ,Endpoint 10 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 18.--19. " EP9DIR          ,Endpoint 9 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 16.--17. "                            EP8DIR         ,Endpoint 8 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 14.--15. "                        EP7DIR              ,Endpoint 7 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 12.--13. " EP6DIR          ,Endpoint 6 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 10.--11. "                            EP5DIR         ,Endpoint 5 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 8.--9. "                        EP4DIR              ,Endpoint 4 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 6.--7. " EP3DIR          ,Endpoint 3 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 4.--5. "                            EP2DIR         ,Endpoint 2 direction" "BIDIR,IN,OUT,?..."
bitfld.long 0x04 2.--3. "                        EP1DIR              ,Endpoint 1 direction" "BIDIR,IN,OUT,?..."
newline
bitfld.long 0x04 0.--1. " EP0DIR          ,Endpoint 0 direction" "BIDIR,IN,OUT,?..."
line.long 0x08 "GHWCFG2,User HW Config2 Register"
bitfld.long 0x08 26.--30. " TKNQDEPTH       ,Device mode IN token sequence learning queue depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,?..."
bitfld.long 0x08 24.--25. "                               PTXQDEPTH      ,Host mode periodic request queue depth" "2,4,8,16"
bitfld.long 0x08 22.--23. "                           NPTXQDEPTH          ,Non-periodic request queue depth" "2,4,8,?..."
newline
bitfld.long 0x08 20. " MULTIPROCINTRPT ,Multi processor interrupt enabled" "Disabled,Enabled"
bitfld.long 0x08 19. "                         DYNFIFOSIZING  ,Dynamic FIFO sizing enabled" "Disabled,Enabled"
bitfld.long 0x08 18. "                     PERIOSUPPORT        ,Periodic OUT channels supported in host mode" "No,Yes"
newline
bitfld.long 0x08 14.--17. " NUMHSTCHNL      ,Number of host channels" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
bitfld.long 0x08 10.--13. "                               NUMDEVEPS      ,Number of device endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 8.--9. "                           FSPHYTYPE           ,Full-speed PHY interface type" "Not supported,Supported,Shared with UTMI+,Shared with ULPI"
newline
bitfld.long 0x08 6.--7. " HSPHYTYPE       ,High-speed PHY interface type" "Not supported,UTMI+,ULPI,UTMI+ and ULPI"
bitfld.long 0x08 5. "                   SINGPNT        ,Point-to-point" "Multi,Single"
bitfld.long 0x08 3.--4. "                       OTGATCH             ,Architecture" "Slave-only,External DMA,Internal DMA,?..."
newline
bitfld.long 0x08 0.--2. " OTGMODE         ,Mode of operation" "HNP- and SRP-Capable OTG,SRP-Capable OTG,Non-HNP and Non-SRP Capable OTG,SRP-Capable Device,Non-OTG Device,SRP-Capable Host,Non-OTG Host,?..."
line.long 0x0C "GHWCFG3,User HW Config3 Register"
hexmask.long.word 0x0C 16.--31. 1. " DFIFODEPTH      ,DFIFO depth"
bitfld.long 0x0C 15. "                             LPMMODE        ,LPM mode specified for mode of operation" "Disabled,Enabled"
bitfld.long 0x0C 14. "                     BCSUPPORT           ,HS OTG controller support for battery charger indication" "Not supported,Supported"
newline
bitfld.long 0x0C 13. " HSTCMODE        ,HSTC mode specified for mode of operation" "Not capable,Capable"
bitfld.long 0x0C 12. "                      ADPSUPPORT     ,ADP logic present within or external to the HS OTG controller indication" "Not present,Present"
bitfld.long 0x0C 11. "                  RSTTYPE             ,Reset style for clocked always blocks in RTL" "Asynchronous,Synchronous"
newline
bitfld.long 0x0C 10. " OPTFEATURE      ,Optional features removed" "Not removed,Removed"
bitfld.long 0x0C 9. "                      VNDCTLSUPT     ,Vendor control interface support" "Not available,Available"
bitfld.long 0x0C 8. "                I2CINTSEL           ,I2C selection" "Not available,Available"
newline
bitfld.long 0x0C 7. " OTGEN           ,OTG function enabled" "Not capable,Capable"
bitfld.long 0x0C 4.--6. "                      PKTSIZEWIDTH   ,Width of packet size counters" "4b,5b,6b,7b,8b,9b,10b,?..."
bitfld.long 0x0C 0.--3. "                          XFERSIZEWIDTH       ,Width of transfer size counters" "11b,12b,13b,14b,15b,16b,17b,18b,19b,?..."
line.long 0x10 "GHWCFG4,User HW Config4 Register"
bitfld.long 0x10 31. " DESCDMA         ,Scatter/gather DMA configuration" "Non dynamic,Dynamic"
bitfld.long 0x10 30. "                      DESCDMAENABLED ,Scatter/gather DMA configuration" "Non-scatter/gather,Scatter/gather"
bitfld.long 0x10 26.--29. "           INEPS               ,Number of device mode IN endpoints including control endpoints" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
newline
bitfld.long 0x10 25. " DEDFIFOMODE     ,Enable dedicated transmit FIFO for device IN endpoints" "Disabled,Enabled"
bitfld.long 0x10 24. "                         SESSENDFLTR    ,Session_end filter enabled" "Disabled,Enabled"
bitfld.long 0x10 23. "                     BVALIDFLTR          ,B_valid filter enabled" "Disabled,Enabled"
newline
bitfld.long 0x10 22. " AVALIDFLTR      ,A_valid filter enabled" "Disabled,Enabled"
bitfld.long 0x10 21. "                         VBUSVALIDFLTR  ,VBUS valid filter enabled" "Disabled,Enabled"
bitfld.long 0x10 20. "                     IDDGFLTR            ,IDDIG filter enable" "Disabled,Enabled"
newline
bitfld.long 0x10 16.--19. " NUMCTLEPS       ,Number of device mode control endpoints in addition to endpoint 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x10 14.--15. "                               PHYDATAWIDTH   ,UTMI+ PHY/ULPI-to-internal UTMI+ wrapper data width" "8b,16b,8b/16b,?..."
bitfld.long 0x10 7. "                       EXTENDEDHIBERNATION ,Enable extended hibernation" "Disabled,Enabled"
newline
bitfld.long 0x10 6. " HIBERNATION     ,Enable hibernation" "Disabled,Enabled"
bitfld.long 0x10 5. "                         AHBFREQ        ,Minimum AHB frequency less than 60 MHz" "No,Yes"
bitfld.long 0x10 4. "                          PARTIALPWRDN        ,Enable partial power down" "Disabled,Enabled"
newline
bitfld.long 0x10 0.--3. " NUMDEVPERIOEPS  ,Number of device mode periodic IN endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x5C++0x03
line.long 0x00 "GDFIFOCFG,Global DFIFO Configuration Register"
hexmask.long.word 0x00 16.--31. 0x01 " EPINFOBASEADDR  ,Start address of the EP info controller"
hexmask.long.word 0x00 0.--15. 1. "                             GDFIFOCFG      ,Dynamic programming of the DFIFO size"
group.long 0x100++0x03
line.long 0x00 "HPTXFSIZ,Host Periodic Transmit FIFO Size Register"
hexmask.long.word 0x00 16.--29. 1. " PTXFSIZE        ,Host periodic TXFIFO depth"
hexmask.long.word 0x00 0.--14. 0x01 "                             PTXFSTADDR     ,Host periodic TXFIFO start address"
newline
group.long 0x104++0x03
line.long 0x00 "DIEPTXF1,Device IN Endpoint Transmit FIFO Size Register 1"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--14. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x108++0x03
line.long 0x00 "DIEPTXF2,Device IN Endpoint Transmit FIFO Size Register 2"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--14. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x10C++0x03
line.long 0x00 "DIEPTXF3,Device IN Endpoint Transmit FIFO Size Register 3"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x110++0x03
line.long 0x00 "DIEPTXF4,Device IN Endpoint Transmit FIFO Size Register 4"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x114++0x03
line.long 0x00 "DIEPTXF5,Device IN Endpoint Transmit FIFO Size Register 5"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x118++0x03
line.long 0x00 "DIEPTXF6,Device IN Endpoint Transmit FIFO Size Register 6"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x11C++0x03
line.long 0x00 "DIEPTXF7,Device IN Endpoint Transmit FIFO Size Register 7"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x120++0x03
line.long 0x00 "DIEPTXF8,Device IN Endpoint Transmit FIFO Size Register 8"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x124++0x03
line.long 0x00 "DIEPTXF9,Device IN Endpoint Transmit FIFO Size Register 9"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x128++0x03
line.long 0x00 "DIEPTXF10,Device IN Endpoint Transmit FIFO Size Register 10"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x12C++0x03
line.long 0x00 "DIEPTXF11,Device IN Endpoint Transmit FIFO Size Register 11"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x130++0x03
line.long 0x00 "DIEPTXF12,Device IN Endpoint Transmit FIFO Size Register 12"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x134++0x03
line.long 0x00 "DIEPTXF13,Device IN Endpoint Transmit FIFO Size Register 13"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x138++0x03
line.long 0x00 "DIEPTXF14,Device IN Endpoint Transmit FIFO Size Register 14"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x13C++0x03
line.long 0x00 "DIEPTXF15,Device IN Endpoint Transmit FIFO Size Register 15"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
group.long 0x140++0x03
line.long 0x00 "DIEPTXF16,Device IN Endpoint Transmit FIFO Size Register 16"
hexmask.long.word 0x00 16.--29. 1. " INEPNTXFDEP  ,IN endpoint TXFIFO depth"
hexmask.long.word 0x00 0.--15. 0x01 " INEPNTXFSTADDR  ,IN endpoint FIFOn transmit RAM start address"
newline
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long 0x400++0x03
line.long 0x00 "HCFG,Host Configuration Register"
bitfld.long 0x00 31. " MODECHTIMED         ,Mode change ready timer enable" "Disabled,Enabled"
bitfld.long 0x00 26. "              PERSCHEDENA    ,Enable periodic scheduling" "Disabled,Enabled"
bitfld.long 0x00 23. "            DESCDMA        ,Enable scatter/gather DMA in host mode" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 8.--15. 1. " RESVALID            ,Resume validation period"
bitfld.long 0x00 7. "                    ENA32KHZS      ,Enable 32 KHz suspend mode" "Disabled,Enabled"
bitfld.long 0x00 2. "            FSLSSUPP       ,FS- and LS-only support" "HS/FS/LS,FS/LS-only"
newline
bitfld.long 0x00 0.--1. " FSLSPCLKSEL         ,FS/LS PHY clock select" "30/60MHz,48MHz,6MHz,?..."
else
group.long 0x400++0x03
line.long 0x00 "HCFG,Host Configuration Register"
bitfld.long 0x00 31. " MODECHTIMED         ,Mode change ready timer enable" "Disabled,Enabled"
bitfld.long 0x00 26. "              PERSCHEDENA    ,Enable periodic scheduling" "Disabled,Enabled"
bitfld.long 0x00 24.--25. "            FRLISTEN       ,Frame list entries" "8,16,32,63"
newline
bitfld.long 0x00 23. " DESCDMA             ,Enable scatter/gather DMA in host mode" "Disabled,Enabled"
hexmask.long.byte 0x00 8.--15. 1. "              RESVALID       ,Resume validation period"
bitfld.long 0x00 7. "                  ENA32KHZS      ,Enable 32 KHz suspend mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " FSLSSUPP            ,FS- and LS-only support" "HS/FS/LS,FS/LS-only"
bitfld.long 0x00 0.--1. "            FSLSPCLKSEL    ,FS/LS PHY clock select" "30/60MHz,48MHz,6MHz,?..."
endif
group.long 0x404++0x03
line.long 0x00 "HFIR,Host Frame Interval Register"
bitfld.long 0x00 16. " HFIRRLDCTRL         ,Dynamic reload capable" "Not capable,Capable"
hexmask.long.word 0x00 0.--15. 1. "           FRINT          ,Frame interval"
rgroup.long 0x408++0x03
line.long 0x00 "HFNUM,Host Frame Number/Frame Time Remaining Register"
hexmask.long.word 0x00 16.--31. 1. " FRREM               ,Frame time remaining"
hexmask.long.word 0x00 0.--15. 1. "                  FRNUM          ,Frame number"
rgroup.long 0x410++0x07
line.long 0x00 "HPTXSTS,Host Periodic Transmit FIFO/Queue Status Register"
bitfld.long 0x00 31. " PTXQTOP[7]          ,Odd/even frame" "Even,Odd"
bitfld.long 0x00 27.--30. "                  PTXQTOP[6:3]   ,Channel/endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 25.--26. "                  PTXQTOP[2:1]   ,Type" "IN/OUT,Zero-length packet,CSPLIT,Disabled"
newline
bitfld.long 0x00 24. " PTXQTOP[0]          ,Terminate" "Not terminated,Terminated"
bitfld.long 0x00 16.--23. "        PTXQSPCAVAIL   ,Periodic transmit request queue space available" "Full,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,?..."
hexmask.long.word 0x00 0.--15. 1. "                PTXFSPCAVAIL   ,Periodic transmit data FIFO space available"
line.long 0x04 "HAINT,Host All Channels Interrupt Register"
bitfld.long 0x04 15. " HAINT[15]           ,Channel interrupt for channel number 15" "No interrupt,Interrupt"
bitfld.long 0x04 14. "          [14]           ,Channel interrupt for channel number 14" "No interrupt,Interrupt"
bitfld.long 0x04 13. "        [13]           ,Channel interrupt for channel number 13" "No interrupt,Interrupt"
newline
bitfld.long 0x04 12. " [12]                ,Channel interrupt for channel number 12" "No interrupt,Interrupt"
bitfld.long 0x04 11. "          [11]           ,Channel interrupt for channel number 11" "No interrupt,Interrupt"
bitfld.long 0x04 10. "        [10]           ,Channel interrupt for channel number 10" "No interrupt,Interrupt"
newline
bitfld.long 0x04 9. " [9]                 ,Channel interrupt for channel number 9" "No interrupt,Interrupt"
bitfld.long 0x04 8. "          [8]            ,Channel interrupt for channel number 8" "No interrupt,Interrupt"
bitfld.long 0x04 7. "        [7]            ,Channel interrupt for channel number 7" "No interrupt,Interrupt"
newline
bitfld.long 0x04 6. " [6]                 ,Channel interrupt for channel number 6" "No interrupt,Interrupt"
bitfld.long 0x04 5. "          [5]            ,Channel interrupt for channel number 5" "No interrupt,Interrupt"
bitfld.long 0x04 4. "        [4]            ,Channel interrupt for channel number 4" "No interrupt,Interrupt"
newline
bitfld.long 0x04 3. " [3]                 ,Channel interrupt for channel number 3" "No interrupt,Interrupt"
bitfld.long 0x04 2. "          [2]            ,Channel interrupt for channel number 2" "No interrupt,Interrupt"
bitfld.long 0x04 1. "        [1]            ,Channel interrupt for channel number 1" "No interrupt,Interrupt"
newline
bitfld.long 0x04 0. " [0]                 ,Channel interrupt for channel number 0" "No interrupt,Interrupt"
group.long 0x418++0x07
line.long 0x00 "HAINTMSK,Host All Channels Interrupt Mask Register"
bitfld.long 0x00 15. " HAINTMSK[15]        ,Channel interrupt mask for channel 15" "0,1"
bitfld.long 0x00 14. "                     [14]           ,Channel interrupt mask for channel 14" "0,1"
bitfld.long 0x00 13. "                   [13]           ,Channel interrupt mask for channel 13" "0,1"
newline
bitfld.long 0x00 12. " [12]                ,Channel interrupt mask for channel 12" "0,1"
bitfld.long 0x00 11. "                     [11]           ,Channel interrupt mask for channel 11" "0,1"
bitfld.long 0x00 10. "                   [10]           ,Channel interrupt mask for channel 10" "0,1"
newline
bitfld.long 0x00 9. " [9]                 ,Channel interrupt mask for channel 9" "0,1"
bitfld.long 0x00 8. "                     [8]            ,Channel interrupt mask for channel 8" "0,1"
bitfld.long 0x00 7. "                   [7]            ,Channel interrupt mask for channel 7" "0,1"
newline
bitfld.long 0x00 6. " [6]                 ,Channel interrupt mask for channel 6" "0,1"
bitfld.long 0x00 5. "                     [5]            ,Channel interrupt mask for channel 5" "0,1"
bitfld.long 0x00 4. "                   [4]            ,Channel interrupt mask for channel 4" "0,1"
newline
bitfld.long 0x00 3. " [3]                 ,Channel interrupt mask for channel 3" "0,1"
bitfld.long 0x00 2. "                     [2]            ,Channel interrupt mask for channel 2" "0,1"
bitfld.long 0x00 1. "                   [1]            ,Channel interrupt mask for channel 1" "0,1"
newline
bitfld.long 0x00 0. " [0]                 ,Channel interrupt mask for channel 0" "0,1"
line.long 0x04 "HFLBADDR,Host Frame List Base Address Register"
group.long 0x440++0x03
line.long 0x00 "HPRT,Host Port Control And Status Register"
rbitfld.long 0x00 17.--18. " PRTSPD              ,Port speed" "High,Full,Low,?..."
bitfld.long 0x00 13.--16. "                  PRTTSTCTL      ,Port test control" "Disabled,J,K,SEO_NAK,Packet,Force,?..."
bitfld.long 0x00 12. "            PRTPWR         ,Port power" "Off,On"
newline
rbitfld.long 0x00 11. " PRTLNSTS[1]         ,Logic level of D+" "Low,High"
rbitfld.long 0x00 10. "                  [0]            ,Logic level of D-" "Low,High"
bitfld.long 0x00 8. "                PRTRST         ,Port reset" "No reset,Reset"
newline
bitfld.long 0x00 7. " PRTSUSP             ,Port suspend" "Not suspended,Suspended"
bitfld.long 0x00 6. "         PRTSET         ,Port resume" "Not resumed,Resumed"
eventfld.long 0x00 5. "         PRTOVRCURRCHNG ,Port overcurrent change" "Not changed,Changed"
newline
rbitfld.long 0x00 4. " PRTOVRCURRACT       ,Port overcurrent active" "No overcurrent,Overcurrent"
bitfld.long 0x00 3. "        PRTENCHNG      ,Port enable/disable change" "Not changed,Changed"
bitfld.long 0x00 2. "         PRTENA         ,Port enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. " PRTCONNDET          ,Port connect detected" "Not detected,Detected"
rbitfld.long 0x00 0. "          PRTCONNSTS     ,Port connect status" "Not connected,Connected"
group.long 0x500++0x07
line.long 0x00 "HCCHAR0,Host Channel 0 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT0,Host Channel 0 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x500+0x08)++0x07
line.long 0x00 "HCINT0,Hot Channel 0 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK0,Host Channel 0 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x500+0x08)++0x07
line.long 0x00 "HCINT0,Hot Channel 0 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK0,Host Channel 0 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x500+0x10)++0x07
line.long 0x00 "HCTSIZ0,Host Channel 0 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA0,Host Channel 0 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x500+0x1C)++0x03
line.long 0x00 "HCDMAB0,Host Channel 0 DMA Buffer Address Register"
else
hgroup.long (0x500+0x1C)++0x03
hide.long 0x00 "HCDMAB0,Host Channel 0 DMA Buffer Address Register"
endif
group.long 0x520++0x07
line.long 0x00 "HCCHAR1,Host Channel 1 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT1,Host Channel 1 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x520+0x08)++0x07
line.long 0x00 "HCINT1,Hot Channel 1 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK1,Host Channel 1 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x520+0x08)++0x07
line.long 0x00 "HCINT1,Hot Channel 1 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK1,Host Channel 1 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x520+0x10)++0x07
line.long 0x00 "HCTSIZ1,Host Channel 1 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA1,Host Channel 1 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x520+0x1C)++0x03
line.long 0x00 "HCDMAB1,Host Channel 1 DMA Buffer Address Register"
else
hgroup.long (0x520+0x1C)++0x03
hide.long 0x00 "HCDMAB1,Host Channel 1 DMA Buffer Address Register"
endif
group.long 0x540++0x07
line.long 0x00 "HCCHAR2,Host Channel 2 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT2,Host Channel 2 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x540+0x08)++0x07
line.long 0x00 "HCINT2,Hot Channel 2 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK2,Host Channel 2 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x540+0x08)++0x07
line.long 0x00 "HCINT2,Hot Channel 2 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK2,Host Channel 2 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x540+0x10)++0x07
line.long 0x00 "HCTSIZ2,Host Channel 2 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA2,Host Channel 2 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x540+0x1C)++0x03
line.long 0x00 "HCDMAB2,Host Channel 2 DMA Buffer Address Register"
else
hgroup.long (0x540+0x1C)++0x03
hide.long 0x00 "HCDMAB2,Host Channel 2 DMA Buffer Address Register"
endif
group.long 0x560++0x07
line.long 0x00 "HCCHAR3,Host Channel 3 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT3,Host Channel 3 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x560+0x08)++0x07
line.long 0x00 "HCINT3,Hot Channel 3 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK3,Host Channel 3 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x560+0x08)++0x07
line.long 0x00 "HCINT3,Hot Channel 3 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK3,Host Channel 3 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x560+0x10)++0x07
line.long 0x00 "HCTSIZ3,Host Channel 3 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA3,Host Channel 3 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x560+0x1C)++0x03
line.long 0x00 "HCDMAB3,Host Channel 3 DMA Buffer Address Register"
else
hgroup.long (0x560+0x1C)++0x03
hide.long 0x00 "HCDMAB3,Host Channel 3 DMA Buffer Address Register"
endif
group.long 0x580++0x07
line.long 0x00 "HCCHAR4,Host Channel 4 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT4,Host Channel 4 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x580+0x08)++0x07
line.long 0x00 "HCINT4,Hot Channel 4 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK4,Host Channel 4 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x580+0x08)++0x07
line.long 0x00 "HCINT4,Hot Channel 4 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK4,Host Channel 4 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x580+0x10)++0x07
line.long 0x00 "HCTSIZ4,Host Channel 4 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA4,Host Channel 4 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x580+0x1C)++0x03
line.long 0x00 "HCDMAB4,Host Channel 4 DMA Buffer Address Register"
else
hgroup.long (0x580+0x1C)++0x03
hide.long 0x00 "HCDMAB4,Host Channel 4 DMA Buffer Address Register"
endif
group.long 0x5A0++0x07
line.long 0x00 "HCCHAR5,Host Channel 5 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT5,Host Channel 5 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x5A0+0x08)++0x07
line.long 0x00 "HCINT5,Hot Channel 5 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK5,Host Channel 5 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x5A0+0x08)++0x07
line.long 0x00 "HCINT5,Hot Channel 5 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK5,Host Channel 5 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x5A0+0x10)++0x07
line.long 0x00 "HCTSIZ5,Host Channel 5 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA5,Host Channel 5 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x5A0+0x1C)++0x03
line.long 0x00 "HCDMAB5,Host Channel 5 DMA Buffer Address Register"
else
hgroup.long (0x5A0+0x1C)++0x03
hide.long 0x00 "HCDMAB5,Host Channel 5 DMA Buffer Address Register"
endif
group.long 0x5C0++0x07
line.long 0x00 "HCCHAR6,Host Channel 6 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT6,Host Channel 6 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x5C0+0x08)++0x07
line.long 0x00 "HCINT6,Hot Channel 6 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK6,Host Channel 6 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x5C0+0x08)++0x07
line.long 0x00 "HCINT6,Hot Channel 6 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK6,Host Channel 6 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x5C0+0x10)++0x07
line.long 0x00 "HCTSIZ6,Host Channel 6 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA6,Host Channel 6 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x5C0+0x1C)++0x03
line.long 0x00 "HCDMAB6,Host Channel 6 DMA Buffer Address Register"
else
hgroup.long (0x5C0+0x1C)++0x03
hide.long 0x00 "HCDMAB6,Host Channel 6 DMA Buffer Address Register"
endif
group.long 0x5E0++0x07
line.long 0x00 "HCCHAR7,Host Channel 7 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT7,Host Channel 7 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x5E0+0x08)++0x07
line.long 0x00 "HCINT7,Hot Channel 7 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK7,Host Channel 7 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x5E0+0x08)++0x07
line.long 0x00 "HCINT7,Hot Channel 7 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK7,Host Channel 7 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x5E0+0x10)++0x07
line.long 0x00 "HCTSIZ7,Host Channel 7 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA7,Host Channel 7 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x5E0+0x1C)++0x03
line.long 0x00 "HCDMAB7,Host Channel 7 DMA Buffer Address Register"
else
hgroup.long (0x5E0+0x1C)++0x03
hide.long 0x00 "HCDMAB7,Host Channel 7 DMA Buffer Address Register"
endif
group.long 0x600++0x07
line.long 0x00 "HCCHAR8,Host Channel 8 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT8,Host Channel 8 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x600+0x08)++0x07
line.long 0x00 "HCINT8,Hot Channel 8 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK8,Host Channel 8 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x600+0x08)++0x07
line.long 0x00 "HCINT8,Hot Channel 8 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK8,Host Channel 8 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x600+0x10)++0x07
line.long 0x00 "HCTSIZ8,Host Channel 8 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA8,Host Channel 8 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x600+0x1C)++0x03
line.long 0x00 "HCDMAB8,Host Channel 8 DMA Buffer Address Register"
else
hgroup.long (0x600+0x1C)++0x03
hide.long 0x00 "HCDMAB8,Host Channel 8 DMA Buffer Address Register"
endif
group.long 0x620++0x07
line.long 0x00 "HCCHAR9,Host Channel 9 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT9,Host Channel 9 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x620+0x08)++0x07
line.long 0x00 "HCINT9,Hot Channel 9 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK9,Host Channel 9 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x620+0x08)++0x07
line.long 0x00 "HCINT9,Hot Channel 9 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK9,Host Channel 9 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x620+0x10)++0x07
line.long 0x00 "HCTSIZ9,Host Channel 9 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA9,Host Channel 9 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x620+0x1C)++0x03
line.long 0x00 "HCDMAB9,Host Channel 9 DMA Buffer Address Register"
else
hgroup.long (0x620+0x1C)++0x03
hide.long 0x00 "HCDMAB9,Host Channel 9 DMA Buffer Address Register"
endif
group.long 0x640++0x07
line.long 0x00 "HCCHAR10,Host Channel 10 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT10,Host Channel 10 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x640+0x08)++0x07
line.long 0x00 "HCINT10,Hot Channel 10 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK10,Host Channel 10 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x640+0x08)++0x07
line.long 0x00 "HCINT10,Hot Channel 10 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK10,Host Channel 10 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x640+0x10)++0x07
line.long 0x00 "HCTSIZ10,Host Channel 10 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA10,Host Channel 10 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x640+0x1C)++0x03
line.long 0x00 "HCDMAB10,Host Channel 10 DMA Buffer Address Register"
else
hgroup.long (0x640+0x1C)++0x03
hide.long 0x00 "HCDMAB10,Host Channel 10 DMA Buffer Address Register"
endif
group.long 0x660++0x07
line.long 0x00 "HCCHAR11,Host Channel 11 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT11,Host Channel 11 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x660+0x08)++0x07
line.long 0x00 "HCINT11,Hot Channel 11 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK11,Host Channel 11 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x660+0x08)++0x07
line.long 0x00 "HCINT11,Hot Channel 11 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK11,Host Channel 11 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x660+0x10)++0x07
line.long 0x00 "HCTSIZ11,Host Channel 11 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA11,Host Channel 11 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x660+0x1C)++0x03
line.long 0x00 "HCDMAB11,Host Channel 11 DMA Buffer Address Register"
else
hgroup.long (0x660+0x1C)++0x03
hide.long 0x00 "HCDMAB11,Host Channel 11 DMA Buffer Address Register"
endif
group.long 0x680++0x07
line.long 0x00 "HCCHAR12,Host Channel 12 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT12,Host Channel 12 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x680+0x08)++0x07
line.long 0x00 "HCINT12,Hot Channel 12 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK12,Host Channel 12 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x680+0x08)++0x07
line.long 0x00 "HCINT12,Hot Channel 12 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK12,Host Channel 12 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x680+0x10)++0x07
line.long 0x00 "HCTSIZ12,Host Channel 12 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA12,Host Channel 12 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x680+0x1C)++0x03
line.long 0x00 "HCDMAB12,Host Channel 12 DMA Buffer Address Register"
else
hgroup.long (0x680+0x1C)++0x03
hide.long 0x00 "HCDMAB12,Host Channel 12 DMA Buffer Address Register"
endif
group.long 0x6A0++0x07
line.long 0x00 "HCCHAR13,Host Channel 13 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT13,Host Channel 13 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x6A0+0x08)++0x07
line.long 0x00 "HCINT13,Hot Channel 13 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK13,Host Channel 13 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x6A0+0x08)++0x07
line.long 0x00 "HCINT13,Hot Channel 13 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK13,Host Channel 13 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x6A0+0x10)++0x07
line.long 0x00 "HCTSIZ13,Host Channel 13 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA13,Host Channel 13 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x6A0+0x1C)++0x03
line.long 0x00 "HCDMAB13,Host Channel 13 DMA Buffer Address Register"
else
hgroup.long (0x6A0+0x1C)++0x03
hide.long 0x00 "HCDMAB13,Host Channel 13 DMA Buffer Address Register"
endif
group.long 0x6C0++0x07
line.long 0x00 "HCCHAR14,Host Channel 14 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT14,Host Channel 14 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x6C0+0x08)++0x07
line.long 0x00 "HCINT14,Hot Channel 14 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK14,Host Channel 14 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x6C0+0x08)++0x07
line.long 0x00 "HCINT14,Hot Channel 14 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK14,Host Channel 14 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x6C0+0x10)++0x07
line.long 0x00 "HCTSIZ14,Host Channel 14 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA14,Host Channel 14 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x6C0+0x1C)++0x03
line.long 0x00 "HCDMAB14,Host Channel 14 DMA Buffer Address Register"
else
hgroup.long (0x6C0+0x1C)++0x03
hide.long 0x00 "HCDMAB14,Host Channel 14 DMA Buffer Address Register"
endif
group.long 0x6E0++0x07
line.long 0x00 "HCCHAR15,Host Channel 15 Characteristics Register"
bitfld.long 0x00 31. " CHENA               ,Channel enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              CHDIS          ,Channel disable" "No,Yes"
bitfld.long 0x00 29. "                 ODDFRM         ,Odd frame" "Even,Odd"
newline
hexmask.long.word 0x00 22.--28. 0x40 " DEVADDR             ,Device address"
bitfld.long 0x00 20.--21. "                  EC             ,Multi count/error count" ",1 transaction,2 transactions,3 transactions"
bitfld.long 0x00 18.--19. "      EPTYPE         ,Endpoint type" "Control,Isochronous,Bulk,Interrupt"
newline
bitfld.long 0x00 17. " LSPDDEV             ,Low-speed device communication indication" "Not low-speed device,Low-speed device"
bitfld.long 0x00 15. "  EPDIR          ,Endpoint direction" "OUT,IN"
bitfld.long 0x00 11.--14. "                 EPNUM          ,Endpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--10. 1. " MPS                 ,Maximum packet size"
line.long 0x04 "HCSPLT15,Host Channel 15 Split Control Register"
bitfld.long 0x04 31. " SPLTENA             ,Split enable" "Disabled,Enabled"
bitfld.long 0x04 16. "              COMPSPLT       ,Do complete split" "No complete,Complete"
bitfld.long 0x04 14.--15. "         XACTPOS        ,Transaction position" "Mid,End,Begin,All"
newline
hexmask.long.word 0x04 7.--13. 0x80 " HUBADDR             ,Hub address"
hexmask.long.byte 0x04 0.--6. 0x01 "                  PRTADDR        ,Port address"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x00)
group.long (0x6E0+0x08)++0x07
line.long 0x00 "HCINT15,Hot Channel 15 Interrupt Register"
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
newline
line.long 0x04 "HCINTMSK15,Host Channel 15 Interrupt Mask Register"
bitfld.long 0x04 10. " DATATGLERRMSK       ,Data toggle error mask" "Masked,Not masked"
bitfld.long 0x04 9. "            FRMOVRUNMSK    ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "          BBLERRMSK      ,Babble error mask" "Masked,Not masked"
newline
bitfld.long 0x04 7. " XACTERRMSK          ,Transaction error mask" "Masked,Not masked"
bitfld.long 0x04 6. "            NYETMSK        ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "          ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 4. " NAKMSK              ,NAK response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 3. "            STALLMSK       ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "          AHBERRMSK      ,AHB error mask" "Masked,Not masked"
newline
bitfld.long 0x04 1. " CHHLTDMSK           ,Channel halted mask" "Masked,Not masked"
bitfld.long 0x04 0. "            XFERCOMPLMSK   ,Transfer completed mask" "Masked,Not masked"
else
group.long (0x6E0+0x08)++0x07
line.long 0x00 "HCINT15,Hot Channel 15 Interrupt Register"
bitfld.long 0x00 13. " DESC_LST_ROLLINTR   ,Descriptor rollover interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          XCS_XACT_ERR   ,Excessive transaction error" "No error,Error"
bitfld.long 0x00 11. "            BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " DATATGLERR          ,Data toggle error" "No error,Error"
bitfld.long 0x00 9. "              FRMOVRUN       ,Frame overrun" "No overrun,Overrun"
bitfld.long 0x00 8. "          BBLERR         ,Babble error" "No error,Error"
newline
bitfld.long 0x00 7. " XACTERR             ,Transaction error" "No error,Error"
bitfld.long 0x00 6. "              NYET           ,NYET response receiver interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        ACK            ,ACK response receiver/transmitted interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " NAK                 ,NAK response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          STALL          ,STALL response received interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No error,Error"
newline
bitfld.long 0x00 1. " CHHLTD              ,Channel halted" "Not halted,Halted"
bitfld.long 0x00 0. "            XFERCOMPL      ,Transfer completed" "Not completed,Completed"
line.long 0x04 "HCINTMSK15,Host Channel 15 Interrupt Mask Register"
bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist rollover interrupt mask" "Masked,Not masked"
bitfld.long 0x04 11. "            ENAINTRMSK     ,Buffer not available interrupt mask" "Masked,Not masked"
bitfld.long 0x04 10. "          DATATGLERRMSK  ,Data toggle error mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " FRMOVRUNMSK         ,Frame overrun mask" "Masked,Not masked"
bitfld.long 0x04 8. "            BBLERRMSK      ,Babble error mask" "Masked,Not masked"
bitfld.long 0x04 7. "          XACTERRMSK     ,Transaction error mask" "Masked,Not masked"
newline
bitfld.long 0x04 6. " NYETMSK             ,NYET response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 5. "            ACKMSK         ,ACK response receiver/transmitted interrupt mask" "Masked,Not masked"
bitfld.long 0x04 4. "          NAKMSK         ,NAK response receiver interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 3. " STALLMSK            ,STALL response receiver interrupt mask" "Masked,Not masked"
bitfld.long 0x04 2. "            AHBERRMSK      ,AHB error mask" "Masked,Not masked"
bitfld.long 0x04 1. "          CHHLTDMSK      ,Channel halted mask" "Masked,Not masked"
newline
bitfld.long 0x04 0. " XFERCOMPLMSK        ,Transfer completed mask" "Masked,Not masked"
endif
group.long (0x6E0+0x10)++0x07
line.long 0x00 "HCTSIZ15,Host Channel 15 Transfer Size Register"
bitfld.long 0x00 31. " DOPNG               ,Do ping" "No ping protocol,Ping protocol"
bitfld.long 0x00 29.--30. "      PID            ,PID" "DATA0,DATA2,DATA1,MDATA/SETUP"
hexmask.long.word 0x00 19.--28. 1. "         PKTCNT         ,Packet count"
newline
hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE            ,Transfer size"
line.long 0x04 "HCDMA15,Host Channel 15 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x6E0+0x1C)++0x03
line.long 0x00 "HCDMAB15,Host Channel 15 DMA Buffer Address Register"
else
hgroup.long (0x6E0+0x1C)++0x03
hide.long 0x00 "HCDMAB15,Host Channel 15 DMA Buffer Address Register"
endif
group.long 0x800++0x03
line.long 0x00 "DCFG,Device Configuration Register"
bitfld.long 0x00 26.--31. " RESVALID            ,Resume validation period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 24.--25. "                    PERSCHINTVL    ,Periodic scheduling interval" "25%,50%,75%,?..."
bitfld.long 0x00 23. "                 DESCDMA        ,Enable scatter/gather DMA in device mode" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " ERRATICINTMSK       ,Erratic error interrupt mask" "Not masked,Masked"
bitfld.long 0x00 14. "            XCVRDLY        ,XCVR delay" "Disabled,Enabled"
bitfld.long 0x00 13. "            ENDEVOUTNAK    ,Enable device OUT NAK" "Disabled,Enabled"
newline
bitfld.long 0x00 11.--12. " PERFRINT            ,Periodic frame interval" "80%,85%,90%,95%"
hexmask.long.byte 0x00 4.--10. 0x10 "                   DEVADDR        ,Device address"
bitfld.long 0x00 3. "                  ENA32KHZSUSP   ,Enable 32 KHz suspend mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. " NZSTSOUTHSHK        ,Non-zero-length status OUT handshake" "Not sent,Sent"
bitfld.long 0x00 0.--1. "              DEVSPD         ,Device speed" "HS 2.0,FS 2.0,LS 1.1,FS 1.1"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long 0x804++0x03
line.long 0x00 "DCTL,Device Control Register"
bitfld.long 0x00 17. " ENCONTONBNA         ,Enable continue on BNA" "Disabled,Enabled"
bitfld.long 0x00 16. "              NAKONBBLE      ,NAK on babble error" "Disabled,Enabled"
bitfld.long 0x00 15. "            IGNRFRMNUM     ,Ignore frame number for isochronous end points" "Not ignored,Ignored"
newline
bitfld.long 0x00 11. " PWRONPRGDONE        ,Power-on programming done" "Not done,Done"
bitfld.long 0x00 10. "              CGOUTNAK       ,Clear global OUT NAK" "No clear,Clear"
bitfld.long 0x00 9. "            SGOUTNAK       ,Set global OUT NAK" "Not set,Set"
newline
bitfld.long 0x00 8. " CGNPINNAK           ,Clear global non-periodic IN NAK" "No clear,Clear"
bitfld.long 0x00 7. "              SGNPINNAK      ,Set global non-periodic IN NAK" "Not set,Set"
bitfld.long 0x00 4.--6. "            TSTCTL         ,Test control" "Disabled,J,K,SEO_NAK,Packet,Force,?..."
newline
rbitfld.long 0x00 3. " GOUTNAKSTS          ,Global OUT NAK status" "NAK/STALL,All"
rbitfld.long 0x00 2. "             GNPINNAKSTS    ,Global non-periodic IN NAK status" "0,1"
bitfld.long 0x00 1. "                   SFTDISCON      ,Soft disconnect" "Connect,Disconnect"
newline
bitfld.long 0x00 0. " RMTWKUPSIG          ,Remote wakeup signaling" "Not sent,Sent"
else
group.long 0x804++0x03
line.long 0x00 "DCTL,Device Control Register"
bitfld.long 0x00 17. " ENCONTONBNA         ,Enable continue on BNA" "Disabled,Enabled"
bitfld.long 0x00 16. "              NAKONBBLE      ,NAK on babble error" "Disabled,Enabled"
bitfld.long 0x00 15. "            IGNRFRMNUM     ,Ignore frame number for isochronous end points" "Not ignored,Ignored"
newline
bitfld.long 0x00 13.--14. " GMC                 ,Global multi count" ",1,2,3"
bitfld.long 0x00 11. "                     PWRONPRGDONE   ,Power-on programming done" "Not done,Done"
bitfld.long 0x00 10. "            CGOUTNAK       ,Clear global OUT NAK" "No clear,Clear"
newline
bitfld.long 0x00 9. " SGOUTNAK            ,Set global OUT NAK" "Not set,Set"
bitfld.long 0x00 8. "               CGNPINNAK      ,Clear global non-periodic IN NAK" "No clear,Clear"
bitfld.long 0x00 7. "            SGNPINNAK      ,Set global non-periodic IN NAK" "Not set,Set"
newline
bitfld.long 0x00 4.--6. " TSTCTL              ,Test control" "Disabled,J,K,SEO_NAK,Packet,Force,?..."
rbitfld.long 0x00 3. "              GOUTNAKSTS     ,Global OUT NAK status" "NAK/STALL,All"
rbitfld.long 0x00 2. "           GNPINNAKSTS    ,Global non-periodic IN NAK status" "0,1"
newline
bitfld.long 0x00 1. " SFTDISCON           ,Soft disconnect" "Connect,Disconnect"
bitfld.long 0x00 0. "            RMTWKUPSIG     ,Remote wakeup signaling" "Not sent,Sent"
endif
rgroup.long 0x808++0x03
line.long 0x00 "DSTS,Device Status Register"
bitfld.long 0x00 23. " DEVLNSTS[1]         ,Logic level of D+" "Low,High"
bitfld.long 0x00 22. "                  DEVLNSTS[0]    ,Logic level of D-" "Low,High"
hexmask.long.word 0x00 8.--21. 1. "                SOFFN          ,Frame or microframe number of the receiver SOF"
newline
bitfld.long 0x00 3. " ERRTICERR           ,Erratic error" "No error,Error"
bitfld.long 0x00 1.--2. "              ENUMSPD        ,Enumerated speed" "HS,FS-30MHz/60MHz,LS,FS-48MHz"
bitfld.long 0x00 0. "      SUSPSTS        ,Suspend status" "Not suspended,Suspended"
group.long 0x810++0x07
line.long 0x00 "DIEPMSK,Device IN Endpoint Common Interrupt Mask Register"
bitfld.long 0x00 13. " NAKMSK              ,NAK interrupt mask" "Masked,Not masked"
bitfld.long 0x00 9. "            BNAININTRMSK   ,BNA interrupt mask" "Masked,Not masked"
bitfld.long 0x00 8. "          TXFIFOUNDRNMSK ,FIFO underrun mask" "Masked,Not masked"
newline
bitfld.long 0x00 6. " INEPNAKEFFMSK       ,IN endpoint NAK effective mask" "Masked,Not masked"
bitfld.long 0x00 4. "            INTKNTXFEMPMSK ,IN token received when TXFIFO empty mask" "Masked,Not masked"
bitfld.long 0x00 3. "          TIMEOUTMSK     ,Timeout condition mask" "Masked,Not masked"
newline
bitfld.long 0x00 2. " AHBERRMSK           ,AHB error mask" "Masked,Not masked"
bitfld.long 0x00 1. "            EPDISBLDMSK    ,Endpoint disabled interrupt mask" "Masked,Not masked"
bitfld.long 0x00 0. "          XFERCOMPLMSK   ,Transfer completed interrupt mask" "Masked,Not masked"
line.long 0x04 "DOEPMSK,Device OUT Endpoint Common Interrupt Mask Register"
bitfld.long 0x04 14. " NYETMSK             ,NYET interrupt mask" "Masked,Not masked"
bitfld.long 0x04 13. "            NAKMSK         ,NAK interrupt mask" "Masked,Not masked"
bitfld.long 0x04 12. "          BBLEERRMSK     ,Babble error interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x04 9. " BNAOUTINTRMSK       ,BNA interrupt mask" "Masked,Not masked"
bitfld.long 0x04 8. "            OUTPKTERRMSK   ,OUT packet error mask" "Masked,Not masked"
bitfld.long 0x04 6. "          BACK2BACKSETUP ,Back-to-back SETUP packets received mask" "Masked,Not masked"
newline
bitfld.long 0x04 5. " STSPHSERCVDMSK      ,Status phase received mask" "Masked,Not masked"
bitfld.long 0x04 4. "            OUTTKNEPDISMSK ,OUT token received when endpoint disabled mask" "Masked,Not masked"
bitfld.long 0x04 3. "          SETUPMSK       ,SETUP phase done mask" "Masked,Not masked"
newline
bitfld.long 0x04 2. " AHBERRMSK           ,AHB error" "Masked,Not masked"
bitfld.long 0x04 1. "            EPDISBLDMSK    ,Endpoint disabled interrupt mask" "Masked,Not masked"
bitfld.long 0x04 0. "          XFERCOMPLMSK   ,Transfer completed interrupt mask" "MAsked,Not masked"
rgroup.long 0x818++0x03
line.long 0x00 "DAINT,Device All Endpoints Interrupt Register"
bitfld.long 0x00 31. " OUTEPINT[15]        ,OUT endpoint 15 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 30. "          [14]           ,OUT endpoint 14 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 29. "        [13]           ,OUT endpoint 13 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. " [12]                ,OUT endpoint 12 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 27. "          [11]           ,OUT endpoint 11 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 26. "        [10]           ,OUT endpoint 10 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. " [9]                 ,OUT endpoint 9 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 24. "          [8]            ,OUT endpoint 8 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 23. "        [7]            ,OUT endpoint 7 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. " [6]                 ,OUT endpoint 6 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 21. "          [5]            ,OUT endpoint 5 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 20. "        [4]            ,OUT endpoint 4 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. " [3]                 ,OUT endpoint 3 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 18. "          [2]            ,OUT endpoint 2 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 17. "        [1]            ,OUT endpoint 1 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. " [0]                 ,OUT endpoint 0 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 15. "          INEPINT[15]    ,IN endpoint 15 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 14. "        [14]           ,IN endpoint 14 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. " [13]                ,IN endpoint 13 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 12. "          [12]           ,IN endpoint 12 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 11. "        [11]           ,IN endpoint 11 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. " [10]                ,IN endpoint 10 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          [9]            ,IN endpoint 9 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        [8]            ,IN endpoint 8 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " [7]                 ,IN endpoint 7 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          [6]            ,IN endpoint 6 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        [5]            ,IN endpoint 5 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " [4]                 ,IN endpoint 4 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          [3]            ,IN endpoint 3 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        [2]            ,IN endpoint 2 interrupt bit" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " [1]                 ,IN endpoint 1 interrupt bit" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          [0]            ,IN endpoint 0 interrupt bit" "No interrupt,Interrupt"
group.long 0x81C++0x03
line.long 0x00 "DAINTMSK,Device All Endpoints Interrupt Mask Register"
bitfld.long 0x00 31. " OUTEPMSK[15]        ,OUT endpoint 15 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 30. "            [14]           ,OUT endpoint 14 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 29. "          [13]           ,OUT endpoint 13 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 28. " [12]                ,OUT endpoint 12 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 27. "            [11]           ,OUT endpoint 11 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 26. "          [10]           ,OUT endpoint 10 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 25. " [9]                 ,OUT endpoint 9 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 24. "            [8]            ,OUT endpoint 8 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 23. "          [7]            ,OUT endpoint 7 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 22. " [6]                 ,OUT endpoint 6 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 21. "            [5]            ,OUT endpoint 5 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 20. "          [4]            ,OUT endpoint 4 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 19. " [3]                 ,OUT endpoint 3 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 18. "            [2]            ,OUT endpoint 2 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 17. "          [1]            ,OUT endpoint 1 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 16. " [0]                 ,OUT endpoint 0 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 15. "            INEPMSK[15]    ,IN endpoint 15 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 14. "          [14]           ,IN endpoint 14 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 13. " [13]                ,IN endpoint 13 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 12. "            [12]           ,IN endpoint 12 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 11. "          [11]           ,IN endpoint 11 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 10. " [10]                ,IN endpoint 10 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 9. "            [9]            ,IN endpoint 9 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 8. "          [8]            ,IN endpoint 8 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 7. " [7]                 ,IN endpoint 7 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 6. "            [6]            ,IN endpoint 6 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 5. "          [5]            ,IN endpoint 5 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 4. " [4]                 ,IN endpoint 4 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 3. "            [3]            ,IN endpoint 3 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 2. "          [2]            ,IN endpoint 2 interrupt mask bit" "Masked,Not masked"
newline
bitfld.long 0x00 1. " [1]                 ,IN endpoint 1 interrupt mask bit" "Masked,Not masked"
bitfld.long 0x00 0. "            [0]            ,IN endpoint 0 interrupt mask bit" "Masked,Not masked"
group.long 0x828++0x0F
line.long 0x00 "DVBUSDIS,Device VBUS Discharge Time Register"
hexmask.long.word 0x00 0.--15. 1. " DVBUSDIS            ,Device VBUS discharge time"
line.long 0x04 "DVBUSPULSE,Device VBUS Pulsing Time Register"
hexmask.long.word 0x04 0.--11. 1. " DVBUSPULSE          ,Device VBUS pulsing time"
line.long 0x08 "DTHRCTL,Device Threshold Control Register"
bitfld.long 0x08 27. " ARBPRKEN            ,Arbiter parking enable" "Disabled,Enabled"
hexmask.long.word 0x08 17.--25. 1. "              RXTHRLEN       ,Receive threshold length"
bitfld.long 0x08 16. "                RXTHREN        ,Receive threshold enable" "Disabled,Enabled"
newline
bitfld.long 0x08 11.--12. " AHBTHRRATIO         ,AHB threshold ratio" "/1,/2,/4,/8"
hexmask.long.word 0x08 2.--10. 1. "                    TXTHRLEN       ,Transmit threshold length"
bitfld.long 0x08 1. "                ISOTHREN       ,ISO IN endpoints length" "Disabled,Enabled"
newline
bitfld.long 0x08 0. " NONISOTHREN         ,Non-ISO IN endpoints threshold enable" "Disabled,Enabled"
line.long 0x0C "DIEPEMPMSK,Device IN Endpoint FIFO Empty Interrupt Mask Register"
bitfld.long 0x0C 15. " INEPTXEMPMSK[15]    ,IN endpoint TX FIFO 15 interrupt mask bit" "0,1"
bitfld.long 0x0C 14. "                     [14]           ,IN endpoint TX FIFO 14 interrupt mask bit" "0,1"
bitfld.long 0x0C 13. "                   [13]           ,IN endpoint TX FIFO 13 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 12. " [12]                ,IN endpoint TX FIFO 12 interrupt mask bit" "0,1"
bitfld.long 0x0C 11. "                     [11]           ,IN endpoint TX FIFO 11 interrupt mask bit" "0,1"
bitfld.long 0x0C 10. "                   [10]           ,IN endpoint TX FIFO 10 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 9. " [9]                 ,IN endpoint TX FIFO 9 interrupt mask bit" "0,1"
bitfld.long 0x0C 8. "                     [8]            ,IN endpoint TX FIFO 8 interrupt mask bit" "0,1"
bitfld.long 0x0C 7. "                   [7]            ,IN endpoint TX FIFO 7 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 6. " [6]                 ,IN endpoint TX FIFO 6 interrupt mask bit" "0,1"
bitfld.long 0x0C 5. "                     [5]            ,IN endpoint TX FIFO 5 interrupt mask bit" "0,1"
bitfld.long 0x0C 4. "                   [4]            ,IN endpoint TX FIFO 4 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 3. " [3]                 ,IN endpoint TX FIFO 3 interrupt mask bit" "0,1"
bitfld.long 0x0C 2. "                     [2]            ,IN endpoint TX FIFO 2 interrupt mask bit" "0,1"
bitfld.long 0x0C 1. "                   [1]            ,IN endpoint TX FIFO 1 interrupt mask bit" "0,1"
newline
bitfld.long 0x0C 0. " [0]                 ,IN endpoint TX FIFO 0 interrupt mask bit" "0,1"
group.long 0x900++0x03
line.long 0x00 "DIEPCTL0,Device Control IN Endpoint 0 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x900+0x08)++0x03
line.long 0x00 "DIEPINT0,Device IN Endpoint 0 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x900+0x08)++0x03
line.long 0x00 "DIEPINT0,Device IN Endpoint 0 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x900+0x10)++0x07
line.long 0x00 "DIEPTSIZ0,Device IN Endpoint 0 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA0,Device IN Endpoint 0 DMA Address Register"
rgroup.long (0x900+0x18)++0x03
line.long 0x00 "DTXFST0,Device IN Endpoint 0 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x900+0x1C)++0x03
line.long 0x00 "DIEPDMAB0,Device IN Endpoint 0 Buffer Address Register"
else
hgroup.long (0x900+0x1C)++0x03
hide.long 0x00 "DIEPDMAB0,Device IN Endpoint 0 Buffer Address Register"
endif
group.long 0x920++0x03
line.long 0x00 "DIEPCTL1,Device Control IN Endpoint 1 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x920+0x08)++0x03
line.long 0x00 "DIEPINT1,Device IN Endpoint 1 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x920+0x08)++0x03
line.long 0x00 "DIEPINT1,Device IN Endpoint 1 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x920+0x10)++0x07
line.long 0x00 "DIEPTSIZ1,Device IN Endpoint 1 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA1,Device IN Endpoint 1 DMA Address Register"
rgroup.long (0x920+0x18)++0x03
line.long 0x00 "DTXFST1,Device IN Endpoint 1 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x920+0x1C)++0x03
line.long 0x00 "DIEPDMAB1,Device IN Endpoint 1 Buffer Address Register"
else
hgroup.long (0x920+0x1C)++0x03
hide.long 0x00 "DIEPDMAB1,Device IN Endpoint 1 Buffer Address Register"
endif
group.long 0x940++0x03
line.long 0x00 "DIEPCTL2,Device Control IN Endpoint 2 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x940+0x08)++0x03
line.long 0x00 "DIEPINT2,Device IN Endpoint 2 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x940+0x08)++0x03
line.long 0x00 "DIEPINT2,Device IN Endpoint 2 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x940+0x10)++0x07
line.long 0x00 "DIEPTSIZ2,Device IN Endpoint 2 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA2,Device IN Endpoint 2 DMA Address Register"
rgroup.long (0x940+0x18)++0x03
line.long 0x00 "DTXFST2,Device IN Endpoint 2 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x940+0x1C)++0x03
line.long 0x00 "DIEPDMAB2,Device IN Endpoint 2 Buffer Address Register"
else
hgroup.long (0x940+0x1C)++0x03
hide.long 0x00 "DIEPDMAB2,Device IN Endpoint 2 Buffer Address Register"
endif
group.long 0x960++0x03
line.long 0x00 "DIEPCTL3,Device Control IN Endpoint 3 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x960+0x08)++0x03
line.long 0x00 "DIEPINT3,Device IN Endpoint 3 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x960+0x08)++0x03
line.long 0x00 "DIEPINT3,Device IN Endpoint 3 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x960+0x10)++0x07
line.long 0x00 "DIEPTSIZ3,Device IN Endpoint 3 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA3,Device IN Endpoint 3 DMA Address Register"
rgroup.long (0x960+0x18)++0x03
line.long 0x00 "DTXFST3,Device IN Endpoint 3 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x960+0x1C)++0x03
line.long 0x00 "DIEPDMAB3,Device IN Endpoint 3 Buffer Address Register"
else
hgroup.long (0x960+0x1C)++0x03
hide.long 0x00 "DIEPDMAB3,Device IN Endpoint 3 Buffer Address Register"
endif
group.long 0x980++0x03
line.long 0x00 "DIEPCTL4,Device Control IN Endpoint 4 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x980+0x08)++0x03
line.long 0x00 "DIEPINT4,Device IN Endpoint 4 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x980+0x08)++0x03
line.long 0x00 "DIEPINT4,Device IN Endpoint 4 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x980+0x10)++0x07
line.long 0x00 "DIEPTSIZ4,Device IN Endpoint 4 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA4,Device IN Endpoint 4 DMA Address Register"
rgroup.long (0x980+0x18)++0x03
line.long 0x00 "DTXFST4,Device IN Endpoint 4 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x980+0x1C)++0x03
line.long 0x00 "DIEPDMAB4,Device IN Endpoint 4 Buffer Address Register"
else
hgroup.long (0x980+0x1C)++0x03
hide.long 0x00 "DIEPDMAB4,Device IN Endpoint 4 Buffer Address Register"
endif
group.long 0x9A0++0x03
line.long 0x00 "DIEPCTL5,Device Control IN Endpoint 5 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x9A0+0x08)++0x03
line.long 0x00 "DIEPINT5,Device IN Endpoint 5 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x9A0+0x08)++0x03
line.long 0x00 "DIEPINT5,Device IN Endpoint 5 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x9A0+0x10)++0x07
line.long 0x00 "DIEPTSIZ5,Device IN Endpoint 5 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA5,Device IN Endpoint 5 DMA Address Register"
rgroup.long (0x9A0+0x18)++0x03
line.long 0x00 "DTXFST5,Device IN Endpoint 5 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x9A0+0x1C)++0x03
line.long 0x00 "DIEPDMAB5,Device IN Endpoint 5 Buffer Address Register"
else
hgroup.long (0x9A0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB5,Device IN Endpoint 5 Buffer Address Register"
endif
group.long 0x9C0++0x03
line.long 0x00 "DIEPCTL6,Device Control IN Endpoint 6 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x9C0+0x08)++0x03
line.long 0x00 "DIEPINT6,Device IN Endpoint 6 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x9C0+0x08)++0x03
line.long 0x00 "DIEPINT6,Device IN Endpoint 6 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x9C0+0x10)++0x07
line.long 0x00 "DIEPTSIZ6,Device IN Endpoint 6 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA6,Device IN Endpoint 6 DMA Address Register"
rgroup.long (0x9C0+0x18)++0x03
line.long 0x00 "DTXFST6,Device IN Endpoint 6 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x9C0+0x1C)++0x03
line.long 0x00 "DIEPDMAB6,Device IN Endpoint 6 Buffer Address Register"
else
hgroup.long (0x9C0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB6,Device IN Endpoint 6 Buffer Address Register"
endif
group.long 0x9E0++0x03
line.long 0x00 "DIEPCTL7,Device Control IN Endpoint 7 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0x9E0+0x08)++0x03
line.long 0x00 "DIEPINT7,Device IN Endpoint 7 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0x9E0+0x08)++0x03
line.long 0x00 "DIEPINT7,Device IN Endpoint 7 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0x9E0+0x10)++0x07
line.long 0x00 "DIEPTSIZ7,Device IN Endpoint 7 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA7,Device IN Endpoint 7 DMA Address Register"
rgroup.long (0x9E0+0x18)++0x03
line.long 0x00 "DTXFST7,Device IN Endpoint 7 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0x9E0+0x1C)++0x03
line.long 0x00 "DIEPDMAB7,Device IN Endpoint 7 Buffer Address Register"
else
hgroup.long (0x9E0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB7,Device IN Endpoint 7 Buffer Address Register"
endif
group.long 0xA00++0x03
line.long 0x00 "DIEPCTL8,Device Control IN Endpoint 8 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xA00+0x08)++0x03
line.long 0x00 "DIEPINT8,Device IN Endpoint 8 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA00+0x08)++0x03
line.long 0x00 "DIEPINT8,Device IN Endpoint 8 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA00+0x10)++0x07
line.long 0x00 "DIEPTSIZ8,Device IN Endpoint 8 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA8,Device IN Endpoint 8 DMA Address Register"
rgroup.long (0xA00+0x18)++0x03
line.long 0x00 "DTXFST8,Device IN Endpoint 8 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA00+0x1C)++0x03
line.long 0x00 "DIEPDMAB8,Device IN Endpoint 8 Buffer Address Register"
else
hgroup.long (0xA00+0x1C)++0x03
hide.long 0x00 "DIEPDMAB8,Device IN Endpoint 8 Buffer Address Register"
endif
group.long 0xA20++0x03
line.long 0x00 "DIEPCTL9,Device Control IN Endpoint 9 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xA20+0x08)++0x03
line.long 0x00 "DIEPINT9,Device IN Endpoint 9 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA20+0x08)++0x03
line.long 0x00 "DIEPINT9,Device IN Endpoint 9 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA20+0x10)++0x07
line.long 0x00 "DIEPTSIZ9,Device IN Endpoint 9 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA9,Device IN Endpoint 9 DMA Address Register"
rgroup.long (0xA20+0x18)++0x03
line.long 0x00 "DTXFST9,Device IN Endpoint 9 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA20+0x1C)++0x03
line.long 0x00 "DIEPDMAB9,Device IN Endpoint 9 Buffer Address Register"
else
hgroup.long (0xA20+0x1C)++0x03
hide.long 0x00 "DIEPDMAB9,Device IN Endpoint 9 Buffer Address Register"
endif
group.long 0xA40++0x03
line.long 0x00 "DIEPCTL10,Device Control IN Endpoint 10 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xA40+0x08)++0x03
line.long 0x00 "DIEPINT10,Device IN Endpoint 10 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA40+0x08)++0x03
line.long 0x00 "DIEPINT10,Device IN Endpoint 10 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA40+0x10)++0x07
line.long 0x00 "DIEPTSIZ10,Device IN Endpoint 10 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA10,Device IN Endpoint 10 DMA Address Register"
rgroup.long (0xA40+0x18)++0x03
line.long 0x00 "DTXFST10,Device IN Endpoint 10 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA40+0x1C)++0x03
line.long 0x00 "DIEPDMAB10,Device IN Endpoint 10 Buffer Address Register"
else
hgroup.long (0xA40+0x1C)++0x03
hide.long 0x00 "DIEPDMAB10,Device IN Endpoint 10 Buffer Address Register"
endif
group.long 0xA60++0x03
line.long 0x00 "DIEPCTL11,Device Control IN Endpoint 11 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xA60+0x08)++0x03
line.long 0x00 "DIEPINT11,Device IN Endpoint 11 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA60+0x08)++0x03
line.long 0x00 "DIEPINT11,Device IN Endpoint 11 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA60+0x10)++0x07
line.long 0x00 "DIEPTSIZ11,Device IN Endpoint 11 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA11,Device IN Endpoint 11 DMA Address Register"
rgroup.long (0xA60+0x18)++0x03
line.long 0x00 "DTXFST11,Device IN Endpoint 11 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA60+0x1C)++0x03
line.long 0x00 "DIEPDMAB11,Device IN Endpoint 11 Buffer Address Register"
else
hgroup.long (0xA60+0x1C)++0x03
hide.long 0x00 "DIEPDMAB11,Device IN Endpoint 11 Buffer Address Register"
endif
group.long 0xA80++0x03
line.long 0x00 "DIEPCTL12,Device Control IN Endpoint 12 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xA80+0x08)++0x03
line.long 0x00 "DIEPINT12,Device IN Endpoint 12 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xA80+0x08)++0x03
line.long 0x00 "DIEPINT12,Device IN Endpoint 12 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xA80+0x10)++0x07
line.long 0x00 "DIEPTSIZ12,Device IN Endpoint 12 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA12,Device IN Endpoint 12 DMA Address Register"
rgroup.long (0xA80+0x18)++0x03
line.long 0x00 "DTXFST12,Device IN Endpoint 12 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xA80+0x1C)++0x03
line.long 0x00 "DIEPDMAB12,Device IN Endpoint 12 Buffer Address Register"
else
hgroup.long (0xA80+0x1C)++0x03
hide.long 0x00 "DIEPDMAB12,Device IN Endpoint 12 Buffer Address Register"
endif
group.long 0xAA0++0x03
line.long 0x00 "DIEPCTL13,Device Control IN Endpoint 13 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xAA0+0x08)++0x03
line.long 0x00 "DIEPINT13,Device IN Endpoint 13 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xAA0+0x08)++0x03
line.long 0x00 "DIEPINT13,Device IN Endpoint 13 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xAA0+0x10)++0x07
line.long 0x00 "DIEPTSIZ13,Device IN Endpoint 13 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA13,Device IN Endpoint 13 DMA Address Register"
rgroup.long (0xAA0+0x18)++0x03
line.long 0x00 "DTXFST13,Device IN Endpoint 13 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xAA0+0x1C)++0x03
line.long 0x00 "DIEPDMAB13,Device IN Endpoint 13 Buffer Address Register"
else
hgroup.long (0xAA0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB13,Device IN Endpoint 13 Buffer Address Register"
endif
group.long 0xAC0++0x03
line.long 0x00 "DIEPCTL14,Device Control IN Endpoint 14 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xAC0+0x08)++0x03
line.long 0x00 "DIEPINT14,Device IN Endpoint 14 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xAC0+0x08)++0x03
line.long 0x00 "DIEPINT14,Device IN Endpoint 14 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xAC0+0x10)++0x07
line.long 0x00 "DIEPTSIZ14,Device IN Endpoint 14 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA14,Device IN Endpoint 14 DMA Address Register"
rgroup.long (0xAC0+0x18)++0x03
line.long 0x00 "DTXFST14,Device IN Endpoint 14 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xAC0+0x1C)++0x03
line.long 0x00 "DIEPDMAB14,Device IN Endpoint 14 Buffer Address Register"
else
hgroup.long (0xAC0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB14,Device IN Endpoint 14 Buffer Address Register"
endif
group.long 0xAE0++0x03
line.long 0x00 "DIEPCTL15,Device Control IN Endpoint 15 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
bitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 22.--25. "           TXFNUM         ,TXFIFO number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "                  STALL          ,STALL handshake" "No stall,Handshake"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "Control 0,?..."
rbitfld.long 0x00 17. "             NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
bitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xAE0+0x08)++0x03
line.long 0x00 "DIEPINT15,Device IN Endpoint 15 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "          BNAINTR        ,BNA interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 8. "        TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. " TXFEMP              ,Transmit FIFO empty" "No interrupt,Interrupt"
bitfld.long 0x00 6. "          INEPNAKEFF     ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "        INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " INTKNTXFEMP         ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
bitfld.long 0x00 3. "          TIMEOUT        ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "        AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xAE0+0x08)++0x03
line.long 0x00 "DIEPINT15,Device IN Endpoint 15 Interrupt Register"
bitfld.long 0x00 14. " NYETINTRPT          ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "          NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 12. "        BBLEERR        ,BBLEERR interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. " PKTDRPSTS           ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 8. "          TXFIFOUNDRN    ,FIFO underrun" "No interrupt,Interrupt"
bitfld.long 0x00 7. "        TXFEMP         ,Transmit FIFO empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 6. " INEPNAKEFF          ,IN endpoint NAK effective" "No interrupt,Interrupt"
bitfld.long 0x00 5. "          INTKNEPMIS     ,IN token received with EP mismatch" "No interrupt,Interrupt"
bitfld.long 0x00 4. "        INTKNTXFEMP    ,IN token receiver when TXFIFO is empty" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. " TIMEOUT             ,Timeout condition" "No interrupt,Interrupt"
bitfld.long 0x00 2. "          AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xAE0+0x10)++0x07
line.long 0x00 "DIEPTSIZ15,Device IN Endpoint 15 Transfer Size Register"
bitfld.long 0x00 19.--20. " PKTCNT              ,Packet count" "0,1,2,3"
hexmask.long.byte 0x00 0.--6. 1. "                     XFERSIZE       ,Transfer size"
line.long 0x04 "DIEPDMA15,Device IN Endpoint 15 DMA Address Register"
rgroup.long (0xAE0+0x18)++0x03
line.long 0x00 "DTXFST15,Device IN Endpoint 15 Transmit FIFO Status Register"
hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL     ,IN endpoint TXFIFO space available"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xAE0+0x1C)++0x03
line.long 0x00 "DIEPDMAB15,Device IN Endpoint 15 Buffer Address Register"
else
hgroup.long (0xAE0+0x1C)++0x03
hide.long 0x00 "DIEPDMAB15,Device IN Endpoint 15 Buffer Address Register"
endif
group.long 0xB00++0x03
line.long 0x00 "DOEPCTL0,Device Control OUT Endpoint 0 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xB00+0x08)++0x03
line.long 0x00 "DOEPINT0,Device OUT Endpoint 0 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB00+0x08)++0x03
line.long 0x00 "DOEPINT0,Device OUT Endpoint 0 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB00+0x10)++0x07
line.long 0x00 "DOEPTSIZ0,Device OUT Endpoint 0 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA0,Device OUT Endpoint 0 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB00+0x1C)++0x03
line.long 0x00 "DOEPDMAB0,Device OUT Endpoint 0 Buffer Address Register"
else
hgroup.long (0xB00+0x1C)++0x03
hide.long 0x00 "DOEPDMAB0,Device OUT Endpoint 0 Buffer Address Register"
endif
group.long 0xB20++0x03
line.long 0x00 "DOEPCTL1,Device Control OUT Endpoint 1 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xB20+0x08)++0x03
line.long 0x00 "DOEPINT1,Device OUT Endpoint 1 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB20+0x08)++0x03
line.long 0x00 "DOEPINT1,Device OUT Endpoint 1 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB20+0x10)++0x07
line.long 0x00 "DOEPTSIZ1,Device OUT Endpoint 1 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA1,Device OUT Endpoint 1 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB20+0x1C)++0x03
line.long 0x00 "DOEPDMAB1,Device OUT Endpoint 1 Buffer Address Register"
else
hgroup.long (0xB20+0x1C)++0x03
hide.long 0x00 "DOEPDMAB1,Device OUT Endpoint 1 Buffer Address Register"
endif
group.long 0xB40++0x03
line.long 0x00 "DOEPCTL2,Device Control OUT Endpoint 2 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xB40+0x08)++0x03
line.long 0x00 "DOEPINT2,Device OUT Endpoint 2 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB40+0x08)++0x03
line.long 0x00 "DOEPINT2,Device OUT Endpoint 2 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB40+0x10)++0x07
line.long 0x00 "DOEPTSIZ2,Device OUT Endpoint 2 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA2,Device OUT Endpoint 2 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB40+0x1C)++0x03
line.long 0x00 "DOEPDMAB2,Device OUT Endpoint 2 Buffer Address Register"
else
hgroup.long (0xB40+0x1C)++0x03
hide.long 0x00 "DOEPDMAB2,Device OUT Endpoint 2 Buffer Address Register"
endif
group.long 0xB60++0x03
line.long 0x00 "DOEPCTL3,Device Control OUT Endpoint 3 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xB60+0x08)++0x03
line.long 0x00 "DOEPINT3,Device OUT Endpoint 3 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB60+0x08)++0x03
line.long 0x00 "DOEPINT3,Device OUT Endpoint 3 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB60+0x10)++0x07
line.long 0x00 "DOEPTSIZ3,Device OUT Endpoint 3 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA3,Device OUT Endpoint 3 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB60+0x1C)++0x03
line.long 0x00 "DOEPDMAB3,Device OUT Endpoint 3 Buffer Address Register"
else
hgroup.long (0xB60+0x1C)++0x03
hide.long 0x00 "DOEPDMAB3,Device OUT Endpoint 3 Buffer Address Register"
endif
group.long 0xB80++0x03
line.long 0x00 "DOEPCTL4,Device Control OUT Endpoint 4 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xB80+0x08)++0x03
line.long 0x00 "DOEPINT4,Device OUT Endpoint 4 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xB80+0x08)++0x03
line.long 0x00 "DOEPINT4,Device OUT Endpoint 4 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xB80+0x10)++0x07
line.long 0x00 "DOEPTSIZ4,Device OUT Endpoint 4 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA4,Device OUT Endpoint 4 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xB80+0x1C)++0x03
line.long 0x00 "DOEPDMAB4,Device OUT Endpoint 4 Buffer Address Register"
else
hgroup.long (0xB80+0x1C)++0x03
hide.long 0x00 "DOEPDMAB4,Device OUT Endpoint 4 Buffer Address Register"
endif
group.long 0xBA0++0x03
line.long 0x00 "DOEPCTL5,Device Control OUT Endpoint 5 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xBA0+0x08)++0x03
line.long 0x00 "DOEPINT5,Device OUT Endpoint 5 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xBA0+0x08)++0x03
line.long 0x00 "DOEPINT5,Device OUT Endpoint 5 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xBA0+0x10)++0x07
line.long 0x00 "DOEPTSIZ5,Device OUT Endpoint 5 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA5,Device OUT Endpoint 5 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xBA0+0x1C)++0x03
line.long 0x00 "DOEPDMAB5,Device OUT Endpoint 5 Buffer Address Register"
else
hgroup.long (0xBA0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB5,Device OUT Endpoint 5 Buffer Address Register"
endif
group.long 0xBC0++0x03
line.long 0x00 "DOEPCTL6,Device Control OUT Endpoint 6 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xBC0+0x08)++0x03
line.long 0x00 "DOEPINT6,Device OUT Endpoint 6 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xBC0+0x08)++0x03
line.long 0x00 "DOEPINT6,Device OUT Endpoint 6 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xBC0+0x10)++0x07
line.long 0x00 "DOEPTSIZ6,Device OUT Endpoint 6 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA6,Device OUT Endpoint 6 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xBC0+0x1C)++0x03
line.long 0x00 "DOEPDMAB6,Device OUT Endpoint 6 Buffer Address Register"
else
hgroup.long (0xBC0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB6,Device OUT Endpoint 6 Buffer Address Register"
endif
group.long 0xBE0++0x03
line.long 0x00 "DOEPCTL7,Device Control OUT Endpoint 7 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xBE0+0x08)++0x03
line.long 0x00 "DOEPINT7,Device OUT Endpoint 7 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xBE0+0x08)++0x03
line.long 0x00 "DOEPINT7,Device OUT Endpoint 7 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xBE0+0x10)++0x07
line.long 0x00 "DOEPTSIZ7,Device OUT Endpoint 7 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA7,Device OUT Endpoint 7 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xBE0+0x1C)++0x03
line.long 0x00 "DOEPDMAB7,Device OUT Endpoint 7 Buffer Address Register"
else
hgroup.long (0xBE0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB7,Device OUT Endpoint 7 Buffer Address Register"
endif
group.long 0xC00++0x03
line.long 0x00 "DOEPCTL8,Device Control OUT Endpoint 8 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xC00+0x08)++0x03
line.long 0x00 "DOEPINT8,Device OUT Endpoint 8 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC00+0x08)++0x03
line.long 0x00 "DOEPINT8,Device OUT Endpoint 8 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC00+0x10)++0x07
line.long 0x00 "DOEPTSIZ8,Device OUT Endpoint 8 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA8,Device OUT Endpoint 8 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC00+0x1C)++0x03
line.long 0x00 "DOEPDMAB8,Device OUT Endpoint 8 Buffer Address Register"
else
hgroup.long (0xC00+0x1C)++0x03
hide.long 0x00 "DOEPDMAB8,Device OUT Endpoint 8 Buffer Address Register"
endif
group.long 0xC20++0x03
line.long 0x00 "DOEPCTL9,Device Control OUT Endpoint 9 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xC20+0x08)++0x03
line.long 0x00 "DOEPINT9,Device OUT Endpoint 9 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC20+0x08)++0x03
line.long 0x00 "DOEPINT9,Device OUT Endpoint 9 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC20+0x10)++0x07
line.long 0x00 "DOEPTSIZ9,Device OUT Endpoint 9 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA9,Device OUT Endpoint 9 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC20+0x1C)++0x03
line.long 0x00 "DOEPDMAB9,Device OUT Endpoint 9 Buffer Address Register"
else
hgroup.long (0xC20+0x1C)++0x03
hide.long 0x00 "DOEPDMAB9,Device OUT Endpoint 9 Buffer Address Register"
endif
group.long 0xC40++0x03
line.long 0x00 "DOEPCTL10,Device Control OUT Endpoint 10 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xC40+0x08)++0x03
line.long 0x00 "DOEPINT10,Device OUT Endpoint 10 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC40+0x08)++0x03
line.long 0x00 "DOEPINT10,Device OUT Endpoint 10 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC40+0x10)++0x07
line.long 0x00 "DOEPTSIZ10,Device OUT Endpoint 10 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA10,Device OUT Endpoint 10 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC40+0x1C)++0x03
line.long 0x00 "DOEPDMAB10,Device OUT Endpoint 10 Buffer Address Register"
else
hgroup.long (0xC40+0x1C)++0x03
hide.long 0x00 "DOEPDMAB10,Device OUT Endpoint 10 Buffer Address Register"
endif
group.long 0xC60++0x03
line.long 0x00 "DOEPCTL11,Device Control OUT Endpoint 11 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xC60+0x08)++0x03
line.long 0x00 "DOEPINT11,Device OUT Endpoint 11 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC60+0x08)++0x03
line.long 0x00 "DOEPINT11,Device OUT Endpoint 11 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC60+0x10)++0x07
line.long 0x00 "DOEPTSIZ11,Device OUT Endpoint 11 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA11,Device OUT Endpoint 11 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC60+0x1C)++0x03
line.long 0x00 "DOEPDMAB11,Device OUT Endpoint 11 Buffer Address Register"
else
hgroup.long (0xC60+0x1C)++0x03
hide.long 0x00 "DOEPDMAB11,Device OUT Endpoint 11 Buffer Address Register"
endif
group.long 0xC80++0x03
line.long 0x00 "DOEPCTL12,Device Control OUT Endpoint 12 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xC80+0x08)++0x03
line.long 0x00 "DOEPINT12,Device OUT Endpoint 12 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xC80+0x08)++0x03
line.long 0x00 "DOEPINT12,Device OUT Endpoint 12 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xC80+0x10)++0x07
line.long 0x00 "DOEPTSIZ12,Device OUT Endpoint 12 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA12,Device OUT Endpoint 12 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xC80+0x1C)++0x03
line.long 0x00 "DOEPDMAB12,Device OUT Endpoint 12 Buffer Address Register"
else
hgroup.long (0xC80+0x1C)++0x03
hide.long 0x00 "DOEPDMAB12,Device OUT Endpoint 12 Buffer Address Register"
endif
group.long 0xCA0++0x03
line.long 0x00 "DOEPCTL13,Device Control OUT Endpoint 13 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xCA0+0x08)++0x03
line.long 0x00 "DOEPINT13,Device OUT Endpoint 13 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xCA0+0x08)++0x03
line.long 0x00 "DOEPINT13,Device OUT Endpoint 13 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xCA0+0x10)++0x07
line.long 0x00 "DOEPTSIZ13,Device OUT Endpoint 13 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA13,Device OUT Endpoint 13 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xCA0+0x1C)++0x03
line.long 0x00 "DOEPDMAB13,Device OUT Endpoint 13 Buffer Address Register"
else
hgroup.long (0xCA0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB13,Device OUT Endpoint 13 Buffer Address Register"
endif
group.long 0xCC0++0x03
line.long 0x00 "DOEPCTL14,Device Control OUT Endpoint 14 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xCC0+0x08)++0x03
line.long 0x00 "DOEPINT14,Device OUT Endpoint 14 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xCC0+0x08)++0x03
line.long 0x00 "DOEPINT14,Device OUT Endpoint 14 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xCC0+0x10)++0x07
line.long 0x00 "DOEPTSIZ14,Device OUT Endpoint 14 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA14,Device OUT Endpoint 14 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xCC0+0x1C)++0x03
line.long 0x00 "DOEPDMAB14,Device OUT Endpoint 14 Buffer Address Register"
else
hgroup.long (0xCC0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB14,Device OUT Endpoint 14 Buffer Address Register"
endif
group.long 0xCE0++0x03
line.long 0x00 "DOEPCTL15,Device Control OUT Endpoint 15 Control Register"
bitfld.long 0x00 31. " EPENA               ,Endpoint enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "              EPDIS          ,Endpoint disable" "No,Yes"
bitfld.long 0x00 27. "                 SNAK           ,Set NAK" "Not set,Set"
newline
bitfld.long 0x00 26. " CNAK                ,Clear NAK" "Not cleared,Cleared"
bitfld.long 0x00 21. "           STALL          ,STALL handshake" "No stall,Handshake"
bitfld.long 0x00 20. "           SNP            ,Snoop mode" "Disabled,Enabled"
newline
rbitfld.long 0x00 18.--19. " EPTYPE              ,Endpoint type" "EP control 0,?..."
rbitfld.long 0x00 17. "          NAKSTS         ,NAK status" "Non-NAK,NAK"
rbitfld.long 0x00 15. "             USBACTEP       ,USB active endpoint" ",Active"
newline
rbitfld.long 0x00 0.--1. " MPS                 ,Maximum packet size" "64B,32B,16B,8B"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
group.long (0xCE0+0x08)++0x03
line.long 0x00 "DOEPINT15,Device OUT Endpoint 15 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 5. "        STSPHSERCVD    ,Status phase received for control write" "Not received,Received"
newline
bitfld.long 0x00 4. " OUTTKNEPDIS         ,OUT token received when endpoint disabled" "Not received,Received"
bitfld.long 0x00 3. "          SETUP          ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "            AHBERR         ,AHB error" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " EPDISBLD            ,Endpoint disabled interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "          XFERCOMPL      ,Transfer completed interrupt" "No interrupt,Interrupt"
else
group.long (0xCE0+0x08)++0x03
line.long 0x00 "DOEPINT15,Device OUT Endpoint 15 Interrupt Register"
bitfld.long 0x00 15. " STUPPKTRCVD         ,Setup packet received" "Not received,Received"
bitfld.long 0x00 14. "          NYETINTRPT     ,NYET interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 13. "        NAKINTRPT      ,NAK interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 12. " BBLEERR             ,BBLEERR interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 11. "          PKTDRPSTS      ,Packet drop status" "No interrupt,Interrupt"
bitfld.long 0x00 9. "        BNAINTR        ,Buffer not available interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 8. " OUTPKTERR           ,OUT packet error" "No error,Error"
bitfld.long 0x00 6. "              BACK2BACKSETUP ,Back-to-back SETUP packets received" "Not received,Received"
bitfld.long 0x00 4. "        OUTTKNEPDIS    ,OUT token received when endpoint disabled" "Not received,Received"
newline
bitfld.long 0x00 3. " SETUP               ,SETUP phase done" "Not done,Done"
bitfld.long 0x00 2. "              AHBERR         ,AHB error" "No interrupt,Interrupt"
bitfld.long 0x00 1. "        EPDISBLD       ,Endpoint disabled interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. " XFERCOMPL           ,Transfer completed interrupt" "No interrupt,Interrupt"
endif
group.long (0xCE0+0x10)++0x07
line.long 0x00 "DOEPTSIZ15,Device OUT Endpoint 15 Transfer Size Register"
bitfld.long 0x00 29.--30. " SUPCNT              ,SETUP packet count" "1,2,3,?..."
bitfld.long 0x00 19. "                     PKTCNT         ,Packet count" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "                   XFERSIZE       ,Transfer size"
line.long 0x04 "DOEPDMA15,Device OUT Endpoint 15 DMA Address Register"
if (((per.l(ad:0xFFB40000+0x50))&0x40000000)==0x40000000)
rgroup.long (0xCE0+0x1C)++0x03
line.long 0x00 "DOEPDMAB15,Device OUT Endpoint 15 Buffer Address Register"
else
hgroup.long (0xCE0+0x1C)++0x03
hide.long 0x00 "DOEPDMAB15,Device OUT Endpoint 15 Buffer Address Register"
endif
group.long 0xE00++0x03
line.long 0x00 "PCGCCTL,Power And Clock Gating Control Register"
rbitfld.long 0x00 7. " L1SUSPENDED         ,L1 deep sleep" "Non deep sleep,Deep sleep"
rbitfld.long 0x00 6. "        PHYSLEEP       ,PHY in sleep" "Not in sleep state,In sleep state"
bitfld.long 0x00 3. "  RSTPDWNMODULE  ,Reset power-down modules" "On,Off"
newline
bitfld.long 0x00 0. " STOPPCLK            ,Stop PHY clock" "Disabled,Enabled"
group.long 0x1000++0x03
line.long 0x00 "DWC_OTG_DFIFO,DWC OTG DFIFO"
button "Data" "d (ad:0xFFB40000+0x1000)--(ad:0xFFB40000+0x10FFF) /long"
width 0x0B
tree.end
tree.end
tree.open "SPI (Serial Peripheral Interface)"
tree "SPI Slave"
tree "SPIS_0"
base ad:0xFFDA2000
width 16.
group.long 0x00++0x03
line.long 0x00 "CTRLR0,Control Register 0"
rbitfld.long 0x00 21.--22. " SPI_FRF ,SPI frame format" "Standard,Dual,Quad,?..."
bitfld.long 0x00 16.--20. "       DFS_32 ,Data frame size in 32-bit transfer size mode" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit,17-bit,18-bit,19-bit,20-bit,21-bit,22-bit,23-bit,24-bit,25-bit,26-bit,27-bit,28-bit,29-bit,30-bit,31-bit,32-bit"
bitfld.long 0x00 12.--15. "          CFS   ,Control frame size" "1-bit,2-bit,3-bit,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit"
newline
bitfld.long 0x00 11. " SRL     ,Shift register loop operation mode" "Normal,Test"
bitfld.long 0x00 10. "         SLV_OE ,Slave output disable" "No,Yes"
bitfld.long 0x00 8.--9. "             TMOD  ,Transfer mode" "Tx and Rx,Tx,Rx,EEPROM"
newline
bitfld.long 0x00 7. " SCPOL   ,Serial clock polarity" "Inactive high,Inactive low"
bitfld.long 0x00 6. "  SCPH   ,Serial clock toggle phase" "In middle,At start"
bitfld.long 0x00 4.--5. "       FRF   ,Frame format" "Motorola SPI,Texas Instruments SPI,National Semiconductors Microwire,?..."
newline
rbitfld.long 0x00 0.--3. " DFS     ,Data frame size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit"
group.long 0x08++0x07
line.long 0x00 "SSIENR,SSI Enable Register"
bitfld.long 0x00 0. " SSI_EN  ,Serial transfer enable" "Disabled,Enabled"
line.long 0x04 "MWCR,Microwire Control Register"
bitfld.long 0x04 1. " MDD     ,Microwire direction of the data word" "Received,Transmitted"
bitfld.long 0x04 0. "    MWMOD  ,Microwire transfer mode" "Non-sequential,Sequential"
group.long 0x18++0x07
line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register"
hexmask.long.byte 0x00 0.--7. 1. " TFT     ,Transmit FIFO threshold"
line.long 0x04 "RXFTLR,Receive FIFO Threshold Level Register"
hexmask.long.byte 0x04 0.--7. 1. " RFT     ,Receive FIFO threshold"
rgroup.long 0x20++0x0B
line.long 0x00 "TXFLR,Transmit FIFO Level Register"
hexmask.long.word 0x00 0.--8. 1. " TXTFL   ,Transmit FIFO level"
line.long 0x04 "RXFLR,Receive FIFO Level Register"
hexmask.long.word 0x04 0.--8. 1. " RXTFL   ,Receive FIFO level"
line.long 0x08 "SR,Status Register"
bitfld.long 0x08 5. " TXE     ,Transmission error" "No error,Error"
newline
bitfld.long 0x08 4. " RFF     ,Receive FIFO full" "Not full,Full"
bitfld.long 0x08 3. "       RFNE   ,Receive FIFO not empty" "No,Yes"
newline
bitfld.long 0x08 2. " TFE     ,Transmit FIFO empty" "Not empty,Empty"
bitfld.long 0x08 1. "      TFNF   ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x08 0. "             BUSY  ,SSI busy flag" "Idle,Busy"
group.long 0x2C++0x03
line.long 0x00 "IMR,Interrupt Mask Register"
bitfld.long 0x00 4. " RXFIM   ,Receive FIFO full interrupt mask" "Masked,Not masked"
bitfld.long 0x00 3. "     RXOIM  ,Receive FIFO overflow interrupt mask" "Masked,Not masked"
bitfld.long 0x00 2. "      RXUIM ,Receive FIFO underflow interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x00 1. " TXOIM   ,Transmit FIFO overflow interrupt mask" "Masked,Not masked"
bitfld.long 0x00 0. "     TXEIM  ,Transmit FIFO empty interrupt mask" "Masked,Not masked"
rgroup.long 0x30++0x07
line.long 0x00 "ISR,Interrupt Status Register"
bitfld.long 0x00 4. " RXFIS   ,Receive FIFO full interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 3. "   RXOIS  ,Receive FIFO overflow interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 2. "    RXUIS ,Receive FIFO underflow interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " TXOIS   ,Transmit FIFO overflow interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 0. "   TXEIS  ,Transmit FIFO empty interrupt status" "No interrupt,Interrupt"
line.long 0x04 "RISR,Raw Interrupt Status Register"
bitfld.long 0x04 4. " RXFIR   ,Receive FIFO full raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 3. "   RXOIR  ,Receive FIFO overflow raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 2. "    RXUIR ,Receive FIFO underflow raw interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x04 1. " TXOIR   ,Transmit FIFO overflow raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 0. "   TXEIR  ,Transmit FIFO empty raw interrupt status" "No interrupt,Interrupt"
newline
hgroup.long 0x38++0x03
hide.long 0x00 "TXOICR,Transmit FIFO Overflow Interrupt Clear Register"
in
hgroup.long 0x3C++0x03
hide.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register"
in
hgroup.long 0x40++0x03
hide.long 0x00 "RXUICR,Receive FIFO Underflow Interrupt Clear Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "MSTICR,Multi-Master Interrupt Clear Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "ICR,Interrupt Clear Register"
in
newline
group.long 0x4C++0x0B
line.long 0x00 "DMACR,DMA Control Register"
bitfld.long 0x00 1. " TDMAE  ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  RDMAE ,Receive DMA enable" "Disabled,Enabled"
line.long 0x04 "DMATDLR,DMA Transmit Data Level Register"
hexmask.long.byte 0x04 0.--7. 1. " DMATDL ,Transmit data level"
line.long 0x08 "DMARDLR,DMA Transmit Data Level Register"
hexmask.long.byte 0x08 0.--7. 1. " DMARDL ,Receive data level"
rgroup.long 0x58++0x07
line.long 0x00 "IDR,Identification Register"
line.long 0x04 "SSI_VERSION_ID,CoreKit Version ID Register"
newline
hgroup.long 0x60++0x03
hide.long 0x00 "DR0,Data Register 0"
in
hgroup.long 0x64++0x03
hide.long 0x00 "DR1,Data Register 1"
in
hgroup.long 0x68++0x03
hide.long 0x00 "DR2,Data Register 2"
in
hgroup.long 0x6C++0x03
hide.long 0x00 "DR3,Data Register 3"
in
hgroup.long 0x70++0x03
hide.long 0x00 "DR4,Data Register 4"
in
hgroup.long 0x74++0x03
hide.long 0x00 "DR5,Data Register 5"
in
hgroup.long 0x78++0x03
hide.long 0x00 "DR6,Data Register 6"
in
hgroup.long 0x7C++0x03
hide.long 0x00 "DR7,Data Register 7"
in
hgroup.long 0x80++0x03
hide.long 0x00 "DR8,Data Register 8"
in
hgroup.long 0x84++0x03
hide.long 0x00 "DR9,Data Register 9"
in
hgroup.long 0x88++0x03
hide.long 0x00 "DR10,Data Register 10"
in
hgroup.long 0x8C++0x03
hide.long 0x00 "DR11,Data Register 11"
in
hgroup.long 0x90++0x03
hide.long 0x00 "DR12,Data Register 12"
in
hgroup.long 0x94++0x03
hide.long 0x00 "DR13,Data Register 13"
in
hgroup.long 0x98++0x03
hide.long 0x00 "DR14,Data Register 14"
in
hgroup.long 0x9C++0x03
hide.long 0x00 "DR15,Data Register 15"
in
hgroup.long 0xA0++0x03
hide.long 0x00 "DR16,Data Register 16"
in
hgroup.long 0xA4++0x03
hide.long 0x00 "DR17,Data Register 17"
in
hgroup.long 0xA8++0x03
hide.long 0x00 "DR18,Data Register 18"
in
hgroup.long 0xAC++0x03
hide.long 0x00 "DR19,Data Register 19"
in
hgroup.long 0xB0++0x03
hide.long 0x00 "DR20,Data Register 20"
in
hgroup.long 0xB4++0x03
hide.long 0x00 "DR21,Data Register 21"
in
hgroup.long 0xB8++0x03
hide.long 0x00 "DR22,Data Register 22"
in
hgroup.long 0xBC++0x03
hide.long 0x00 "DR23,Data Register 23"
in
hgroup.long 0xC0++0x03
hide.long 0x00 "DR24,Data Register 24"
in
hgroup.long 0xC4++0x03
hide.long 0x00 "DR25,Data Register 25"
in
hgroup.long 0xC8++0x03
hide.long 0x00 "DR26,Data Register 26"
in
hgroup.long 0xCC++0x03
hide.long 0x00 "DR27,Data Register 27"
in
hgroup.long 0xD0++0x03
hide.long 0x00 "DR28,Data Register 28"
in
hgroup.long 0xD4++0x03
hide.long 0x00 "DR29,Data Register 29"
in
hgroup.long 0xD8++0x03
hide.long 0x00 "DR30,Data Register 30"
in
hgroup.long 0xDC++0x03
hide.long 0x00 "DR31,Data Register 31"
in
hgroup.long 0xE0++0x03
hide.long 0x00 "DR32,Data Register 32"
in
hgroup.long 0xE4++0x03
hide.long 0x00 "DR33,Data Register 33"
in
hgroup.long 0xE8++0x03
hide.long 0x00 "DR34,Data Register 34"
in
hgroup.long 0xEC++0x03
hide.long 0x00 "DR35,Data Register 35"
in
newline
width 0x0B
tree.end
tree "SPIS_1"
base ad:0xFFDA3000
width 16.
group.long 0x00++0x03
line.long 0x00 "CTRLR0,Control Register 0"
rbitfld.long 0x00 21.--22. " SPI_FRF ,SPI frame format" "Standard,Dual,Quad,?..."
bitfld.long 0x00 16.--20. "       DFS_32 ,Data frame size in 32-bit transfer size mode" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit,17-bit,18-bit,19-bit,20-bit,21-bit,22-bit,23-bit,24-bit,25-bit,26-bit,27-bit,28-bit,29-bit,30-bit,31-bit,32-bit"
bitfld.long 0x00 12.--15. "          CFS   ,Control frame size" "1-bit,2-bit,3-bit,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit"
newline
bitfld.long 0x00 11. " SRL     ,Shift register loop operation mode" "Normal,Test"
bitfld.long 0x00 10. "         SLV_OE ,Slave output disable" "No,Yes"
bitfld.long 0x00 8.--9. "             TMOD  ,Transfer mode" "Tx and Rx,Tx,Rx,EEPROM"
newline
bitfld.long 0x00 7. " SCPOL   ,Serial clock polarity" "Inactive high,Inactive low"
bitfld.long 0x00 6. "  SCPH   ,Serial clock toggle phase" "In middle,At start"
bitfld.long 0x00 4.--5. "       FRF   ,Frame format" "Motorola SPI,Texas Instruments SPI,National Semiconductors Microwire,?..."
newline
rbitfld.long 0x00 0.--3. " DFS     ,Data frame size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit"
group.long 0x08++0x07
line.long 0x00 "SSIENR,SSI Enable Register"
bitfld.long 0x00 0. " SSI_EN  ,Serial transfer enable" "Disabled,Enabled"
line.long 0x04 "MWCR,Microwire Control Register"
bitfld.long 0x04 1. " MDD     ,Microwire direction of the data word" "Received,Transmitted"
bitfld.long 0x04 0. "    MWMOD  ,Microwire transfer mode" "Non-sequential,Sequential"
group.long 0x18++0x07
line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register"
hexmask.long.byte 0x00 0.--7. 1. " TFT     ,Transmit FIFO threshold"
line.long 0x04 "RXFTLR,Receive FIFO Threshold Level Register"
hexmask.long.byte 0x04 0.--7. 1. " RFT     ,Receive FIFO threshold"
rgroup.long 0x20++0x0B
line.long 0x00 "TXFLR,Transmit FIFO Level Register"
hexmask.long.word 0x00 0.--8. 1. " TXTFL   ,Transmit FIFO level"
line.long 0x04 "RXFLR,Receive FIFO Level Register"
hexmask.long.word 0x04 0.--8. 1. " RXTFL   ,Receive FIFO level"
line.long 0x08 "SR,Status Register"
bitfld.long 0x08 5. " TXE     ,Transmission error" "No error,Error"
newline
bitfld.long 0x08 4. " RFF     ,Receive FIFO full" "Not full,Full"
bitfld.long 0x08 3. "       RFNE   ,Receive FIFO not empty" "No,Yes"
newline
bitfld.long 0x08 2. " TFE     ,Transmit FIFO empty" "Not empty,Empty"
bitfld.long 0x08 1. "      TFNF   ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x08 0. "             BUSY  ,SSI busy flag" "Idle,Busy"
group.long 0x2C++0x03
line.long 0x00 "IMR,Interrupt Mask Register"
bitfld.long 0x00 4. " RXFIM   ,Receive FIFO full interrupt mask" "Masked,Not masked"
bitfld.long 0x00 3. "     RXOIM  ,Receive FIFO overflow interrupt mask" "Masked,Not masked"
bitfld.long 0x00 2. "      RXUIM ,Receive FIFO underflow interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x00 1. " TXOIM   ,Transmit FIFO overflow interrupt mask" "Masked,Not masked"
bitfld.long 0x00 0. "     TXEIM  ,Transmit FIFO empty interrupt mask" "Masked,Not masked"
rgroup.long 0x30++0x07
line.long 0x00 "ISR,Interrupt Status Register"
bitfld.long 0x00 4. " RXFIS   ,Receive FIFO full interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 3. "   RXOIS  ,Receive FIFO overflow interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 2. "    RXUIS ,Receive FIFO underflow interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " TXOIS   ,Transmit FIFO overflow interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 0. "   TXEIS  ,Transmit FIFO empty interrupt status" "No interrupt,Interrupt"
line.long 0x04 "RISR,Raw Interrupt Status Register"
bitfld.long 0x04 4. " RXFIR   ,Receive FIFO full raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 3. "   RXOIR  ,Receive FIFO overflow raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 2. "    RXUIR ,Receive FIFO underflow raw interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x04 1. " TXOIR   ,Transmit FIFO overflow raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 0. "   TXEIR  ,Transmit FIFO empty raw interrupt status" "No interrupt,Interrupt"
newline
hgroup.long 0x38++0x03
hide.long 0x00 "TXOICR,Transmit FIFO Overflow Interrupt Clear Register"
in
hgroup.long 0x3C++0x03
hide.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register"
in
hgroup.long 0x40++0x03
hide.long 0x00 "RXUICR,Receive FIFO Underflow Interrupt Clear Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "MSTICR,Multi-Master Interrupt Clear Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "ICR,Interrupt Clear Register"
in
newline
group.long 0x4C++0x0B
line.long 0x00 "DMACR,DMA Control Register"
bitfld.long 0x00 1. " TDMAE  ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  RDMAE ,Receive DMA enable" "Disabled,Enabled"
line.long 0x04 "DMATDLR,DMA Transmit Data Level Register"
hexmask.long.byte 0x04 0.--7. 1. " DMATDL ,Transmit data level"
line.long 0x08 "DMARDLR,DMA Transmit Data Level Register"
hexmask.long.byte 0x08 0.--7. 1. " DMARDL ,Receive data level"
rgroup.long 0x58++0x07
line.long 0x00 "IDR,Identification Register"
line.long 0x04 "SSI_VERSION_ID,CoreKit Version ID Register"
newline
hgroup.long 0x60++0x03
hide.long 0x00 "DR0,Data Register 0"
in
hgroup.long 0x64++0x03
hide.long 0x00 "DR1,Data Register 1"
in
hgroup.long 0x68++0x03
hide.long 0x00 "DR2,Data Register 2"
in
hgroup.long 0x6C++0x03
hide.long 0x00 "DR3,Data Register 3"
in
hgroup.long 0x70++0x03
hide.long 0x00 "DR4,Data Register 4"
in
hgroup.long 0x74++0x03
hide.long 0x00 "DR5,Data Register 5"
in
hgroup.long 0x78++0x03
hide.long 0x00 "DR6,Data Register 6"
in
hgroup.long 0x7C++0x03
hide.long 0x00 "DR7,Data Register 7"
in
hgroup.long 0x80++0x03
hide.long 0x00 "DR8,Data Register 8"
in
hgroup.long 0x84++0x03
hide.long 0x00 "DR9,Data Register 9"
in
hgroup.long 0x88++0x03
hide.long 0x00 "DR10,Data Register 10"
in
hgroup.long 0x8C++0x03
hide.long 0x00 "DR11,Data Register 11"
in
hgroup.long 0x90++0x03
hide.long 0x00 "DR12,Data Register 12"
in
hgroup.long 0x94++0x03
hide.long 0x00 "DR13,Data Register 13"
in
hgroup.long 0x98++0x03
hide.long 0x00 "DR14,Data Register 14"
in
hgroup.long 0x9C++0x03
hide.long 0x00 "DR15,Data Register 15"
in
hgroup.long 0xA0++0x03
hide.long 0x00 "DR16,Data Register 16"
in
hgroup.long 0xA4++0x03
hide.long 0x00 "DR17,Data Register 17"
in
hgroup.long 0xA8++0x03
hide.long 0x00 "DR18,Data Register 18"
in
hgroup.long 0xAC++0x03
hide.long 0x00 "DR19,Data Register 19"
in
hgroup.long 0xB0++0x03
hide.long 0x00 "DR20,Data Register 20"
in
hgroup.long 0xB4++0x03
hide.long 0x00 "DR21,Data Register 21"
in
hgroup.long 0xB8++0x03
hide.long 0x00 "DR22,Data Register 22"
in
hgroup.long 0xBC++0x03
hide.long 0x00 "DR23,Data Register 23"
in
hgroup.long 0xC0++0x03
hide.long 0x00 "DR24,Data Register 24"
in
hgroup.long 0xC4++0x03
hide.long 0x00 "DR25,Data Register 25"
in
hgroup.long 0xC8++0x03
hide.long 0x00 "DR26,Data Register 26"
in
hgroup.long 0xCC++0x03
hide.long 0x00 "DR27,Data Register 27"
in
hgroup.long 0xD0++0x03
hide.long 0x00 "DR28,Data Register 28"
in
hgroup.long 0xD4++0x03
hide.long 0x00 "DR29,Data Register 29"
in
hgroup.long 0xD8++0x03
hide.long 0x00 "DR30,Data Register 30"
in
hgroup.long 0xDC++0x03
hide.long 0x00 "DR31,Data Register 31"
in
hgroup.long 0xE0++0x03
hide.long 0x00 "DR32,Data Register 32"
in
hgroup.long 0xE4++0x03
hide.long 0x00 "DR33,Data Register 33"
in
hgroup.long 0xE8++0x03
hide.long 0x00 "DR34,Data Register 34"
in
hgroup.long 0xEC++0x03
hide.long 0x00 "DR35,Data Register 35"
in
newline
width 0x0B
tree.end
tree.end
tree "SPI Master"
tree "SPIM_0"
base ad:0xFFDA4000
width 16.
group.long 0x00++0x03
line.long 0x00 "CTRLR0,Control Register 0"
rbitfld.long 0x00 21.--22. " SPI_FRF ,SPI frame format" "Standard,Dual,Quad,?..."
bitfld.long 0x00 16.--20. "       DFS_32 ,Data frame size in 32-bit transfer size mode" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit,17-bit,18-bit,19-bit,20-bit,21-bit,22-bit,23-bit,24-bit,25-bit,26-bit,27-bit,28-bit,29-bit,30-bit,31-bit,32-bit"
bitfld.long 0x00 12.--15. "          CFS   ,Control frame size" "1-bit,2-bit,3-bit,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit"
newline
bitfld.long 0x00 11. " SRL     ,Shift register loop operation mode" "Normal,Test"
bitfld.long 0x00 10. "         SLV_OE ,Slave output disable" "No,Yes"
bitfld.long 0x00 8.--9. "             TMOD  ,Transfer mode" "Tx and Rx,Tx,Rx,EEPROM"
newline
bitfld.long 0x00 7. " SCPOL   ,Serial clock polarity" "Inactive high,Inactive low"
bitfld.long 0x00 6. "  SCPH   ,Serial clock toggle phase" "In middle,At start"
bitfld.long 0x00 4.--5. "       FRF   ,Frame format" "Motorola SPI,Texas Instruments SPI,National Semiconductors Microwire,?..."
newline
rbitfld.long 0x00 0.--3. " DFS     ,Data frame size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit"
group.long 0x04++0x03
line.long 0x00 "CTRLR1,Control Register 1"
hexmask.long.word 0x00 0.--15. 1. " NDF     ,Number of data frames"
group.long 0x08++0x07
line.long 0x00 "SSIENR,SSI Enable Register"
bitfld.long 0x00 0. " SSI_EN  ,Serial transfer enable" "Disabled,Enabled"
line.long 0x04 "MWCR,Microwire Control Register"
bitfld.long 0x04 2. " MHS     ,Microwire handshaking enable" "Disabled,Enabled"
newline
bitfld.long 0x04 1. " MDD     ,Microwire direction of the data word" "Received,Transmitted"
bitfld.long 0x04 0. "    MWMOD  ,Microwire transfer mode" "Non-sequential,Sequential"
group.long 0x10++0x07
line.long 0x00 "SER,Slave Enable Register"
bitfld.long 0x00 3. " SER[3]  ,Slave select 3" "Not selected,Selected"
bitfld.long 0x00 2. "   [2]    ,Slave select 2" "Not selected,Selected"
bitfld.long 0x00 1. "    [1]   ,Slave select 1" "Not selected,Selected"
newline
bitfld.long 0x00 0. " [0]     ,Slave select 0" "Not selected,Selected"
line.long 0x04 "BAUDR,Baud Rate Select Register"
hexmask.long.word 0x04 0.--15. 1. " SCKDV   ,SSI clock divider"
group.long 0x18++0x07
line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register"
hexmask.long.byte 0x00 0.--7. 1. " TFT     ,Transmit FIFO threshold"
line.long 0x04 "RXFTLR,Receive FIFO Threshold Level Register"
hexmask.long.byte 0x04 0.--7. 1. " RFT     ,Receive FIFO threshold"
rgroup.long 0x20++0x0B
line.long 0x00 "TXFLR,Transmit FIFO Level Register"
hexmask.long.word 0x00 0.--8. 1. " TXTFL   ,Transmit FIFO level"
line.long 0x04 "RXFLR,Receive FIFO Level Register"
hexmask.long.word 0x04 0.--8. 1. " RXTFL   ,Receive FIFO level"
line.long 0x08 "SR,Status Register"
bitfld.long 0x08 6. " DCOL    ,Data collision error" "No error,Error"
newline
bitfld.long 0x08 4. " RFF     ,Receive FIFO full" "Not full,Full"
bitfld.long 0x08 3. "       RFNE   ,Receive FIFO not empty" "No,Yes"
newline
bitfld.long 0x08 2. " TFE     ,Transmit FIFO empty" "Not empty,Empty"
bitfld.long 0x08 1. "      TFNF   ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x08 0. "             BUSY  ,SSI busy flag" "Idle,Busy"
group.long 0x2C++0x03
line.long 0x00 "IMR,Interrupt Mask Register"
bitfld.long 0x00 5. " MSTIM   ,Multi-master contention interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x00 4. " RXFIM   ,Receive FIFO full interrupt mask" "Masked,Not masked"
bitfld.long 0x00 3. "     RXOIM  ,Receive FIFO overflow interrupt mask" "Masked,Not masked"
bitfld.long 0x00 2. "      RXUIM ,Receive FIFO underflow interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x00 1. " TXOIM   ,Transmit FIFO overflow interrupt mask" "Masked,Not masked"
bitfld.long 0x00 0. "     TXEIM  ,Transmit FIFO empty interrupt mask" "Masked,Not masked"
rgroup.long 0x30++0x07
line.long 0x00 "ISR,Interrupt Status Register"
bitfld.long 0x00 5. " MSTIS   ,Multi-master contention interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " RXFIS   ,Receive FIFO full interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 3. "   RXOIS  ,Receive FIFO overflow interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 2. "    RXUIS ,Receive FIFO underflow interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " TXOIS   ,Transmit FIFO overflow interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 0. "   TXEIS  ,Transmit FIFO empty interrupt status" "No interrupt,Interrupt"
line.long 0x04 "RISR,Raw Interrupt Status Register"
bitfld.long 0x04 5. " MSTIR   ,Multi-master contention raw interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x04 4. " RXFIR   ,Receive FIFO full raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 3. "   RXOIR  ,Receive FIFO overflow raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 2. "    RXUIR ,Receive FIFO underflow raw interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x04 1. " TXOIR   ,Transmit FIFO overflow raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 0. "   TXEIR  ,Transmit FIFO empty raw interrupt status" "No interrupt,Interrupt"
newline
hgroup.long 0x38++0x03
hide.long 0x00 "TXOICR,Transmit FIFO Overflow Interrupt Clear Register"
in
hgroup.long 0x3C++0x03
hide.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register"
in
hgroup.long 0x40++0x03
hide.long 0x00 "RXUICR,Receive FIFO Underflow Interrupt Clear Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "MSTICR,Multi-Master Interrupt Clear Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "ICR,Interrupt Clear Register"
in
newline
group.long 0x4C++0x0B
line.long 0x00 "DMACR,DMA Control Register"
bitfld.long 0x00 1. " TDMAE  ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  RDMAE ,Receive DMA enable" "Disabled,Enabled"
line.long 0x04 "DMATDLR,DMA Transmit Data Level Register"
hexmask.long.byte 0x04 0.--7. 1. " DMATDL ,Transmit data level"
line.long 0x08 "DMARDLR,DMA Transmit Data Level Register"
hexmask.long.byte 0x08 0.--7. 1. " DMARDL ,Receive data level"
rgroup.long 0x58++0x07
line.long 0x00 "IDR,Identification Register"
line.long 0x04 "SSI_VERSION_ID,CoreKit Version ID Register"
newline
hgroup.long 0x60++0x03
hide.long 0x00 "DR0,Data Register 0"
in
hgroup.long 0x64++0x03
hide.long 0x00 "DR1,Data Register 1"
in
hgroup.long 0x68++0x03
hide.long 0x00 "DR2,Data Register 2"
in
hgroup.long 0x6C++0x03
hide.long 0x00 "DR3,Data Register 3"
in
hgroup.long 0x70++0x03
hide.long 0x00 "DR4,Data Register 4"
in
hgroup.long 0x74++0x03
hide.long 0x00 "DR5,Data Register 5"
in
hgroup.long 0x78++0x03
hide.long 0x00 "DR6,Data Register 6"
in
hgroup.long 0x7C++0x03
hide.long 0x00 "DR7,Data Register 7"
in
hgroup.long 0x80++0x03
hide.long 0x00 "DR8,Data Register 8"
in
hgroup.long 0x84++0x03
hide.long 0x00 "DR9,Data Register 9"
in
hgroup.long 0x88++0x03
hide.long 0x00 "DR10,Data Register 10"
in
hgroup.long 0x8C++0x03
hide.long 0x00 "DR11,Data Register 11"
in
hgroup.long 0x90++0x03
hide.long 0x00 "DR12,Data Register 12"
in
hgroup.long 0x94++0x03
hide.long 0x00 "DR13,Data Register 13"
in
hgroup.long 0x98++0x03
hide.long 0x00 "DR14,Data Register 14"
in
hgroup.long 0x9C++0x03
hide.long 0x00 "DR15,Data Register 15"
in
hgroup.long 0xA0++0x03
hide.long 0x00 "DR16,Data Register 16"
in
hgroup.long 0xA4++0x03
hide.long 0x00 "DR17,Data Register 17"
in
hgroup.long 0xA8++0x03
hide.long 0x00 "DR18,Data Register 18"
in
hgroup.long 0xAC++0x03
hide.long 0x00 "DR19,Data Register 19"
in
hgroup.long 0xB0++0x03
hide.long 0x00 "DR20,Data Register 20"
in
hgroup.long 0xB4++0x03
hide.long 0x00 "DR21,Data Register 21"
in
hgroup.long 0xB8++0x03
hide.long 0x00 "DR22,Data Register 22"
in
hgroup.long 0xBC++0x03
hide.long 0x00 "DR23,Data Register 23"
in
hgroup.long 0xC0++0x03
hide.long 0x00 "DR24,Data Register 24"
in
hgroup.long 0xC4++0x03
hide.long 0x00 "DR25,Data Register 25"
in
hgroup.long 0xC8++0x03
hide.long 0x00 "DR26,Data Register 26"
in
hgroup.long 0xCC++0x03
hide.long 0x00 "DR27,Data Register 27"
in
hgroup.long 0xD0++0x03
hide.long 0x00 "DR28,Data Register 28"
in
hgroup.long 0xD4++0x03
hide.long 0x00 "DR29,Data Register 29"
in
hgroup.long 0xD8++0x03
hide.long 0x00 "DR30,Data Register 30"
in
hgroup.long 0xDC++0x03
hide.long 0x00 "DR31,Data Register 31"
in
hgroup.long 0xE0++0x03
hide.long 0x00 "DR32,Data Register 32"
in
hgroup.long 0xE4++0x03
hide.long 0x00 "DR33,Data Register 33"
in
hgroup.long 0xE8++0x03
hide.long 0x00 "DR34,Data Register 34"
in
hgroup.long 0xEC++0x03
hide.long 0x00 "DR35,Data Register 35"
in
newline
group.long 0xF0++0x03
line.long 0x00 "RX_SAMPLE_DLY,RX Sample Delay Register"
hexmask.long.byte 0x00 0.--7. 1. " RSD ,Rxd sample delay"
width 0x0B
tree.end
tree "SPIM_1"
base ad:0xFFDA5000
width 16.
group.long 0x00++0x03
line.long 0x00 "CTRLR0,Control Register 0"
rbitfld.long 0x00 21.--22. " SPI_FRF ,SPI frame format" "Standard,Dual,Quad,?..."
bitfld.long 0x00 16.--20. "       DFS_32 ,Data frame size in 32-bit transfer size mode" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit,17-bit,18-bit,19-bit,20-bit,21-bit,22-bit,23-bit,24-bit,25-bit,26-bit,27-bit,28-bit,29-bit,30-bit,31-bit,32-bit"
bitfld.long 0x00 12.--15. "          CFS   ,Control frame size" "1-bit,2-bit,3-bit,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit"
newline
bitfld.long 0x00 11. " SRL     ,Shift register loop operation mode" "Normal,Test"
bitfld.long 0x00 10. "         SLV_OE ,Slave output disable" "No,Yes"
bitfld.long 0x00 8.--9. "             TMOD  ,Transfer mode" "Tx and Rx,Tx,Rx,EEPROM"
newline
bitfld.long 0x00 7. " SCPOL   ,Serial clock polarity" "Inactive high,Inactive low"
bitfld.long 0x00 6. "  SCPH   ,Serial clock toggle phase" "In middle,At start"
bitfld.long 0x00 4.--5. "       FRF   ,Frame format" "Motorola SPI,Texas Instruments SPI,National Semiconductors Microwire,?..."
newline
rbitfld.long 0x00 0.--3. " DFS     ,Data frame size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit"
group.long 0x04++0x03
line.long 0x00 "CTRLR1,Control Register 1"
hexmask.long.word 0x00 0.--15. 1. " NDF     ,Number of data frames"
group.long 0x08++0x07
line.long 0x00 "SSIENR,SSI Enable Register"
bitfld.long 0x00 0. " SSI_EN  ,Serial transfer enable" "Disabled,Enabled"
line.long 0x04 "MWCR,Microwire Control Register"
bitfld.long 0x04 2. " MHS     ,Microwire handshaking enable" "Disabled,Enabled"
newline
bitfld.long 0x04 1. " MDD     ,Microwire direction of the data word" "Received,Transmitted"
bitfld.long 0x04 0. "    MWMOD  ,Microwire transfer mode" "Non-sequential,Sequential"
group.long 0x10++0x07
line.long 0x00 "SER,Slave Enable Register"
bitfld.long 0x00 3. " SER[3]  ,Slave select 3" "Not selected,Selected"
bitfld.long 0x00 2. "   [2]    ,Slave select 2" "Not selected,Selected"
bitfld.long 0x00 1. "    [1]   ,Slave select 1" "Not selected,Selected"
newline
bitfld.long 0x00 0. " [0]     ,Slave select 0" "Not selected,Selected"
line.long 0x04 "BAUDR,Baud Rate Select Register"
hexmask.long.word 0x04 0.--15. 1. " SCKDV   ,SSI clock divider"
group.long 0x18++0x07
line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register"
hexmask.long.byte 0x00 0.--7. 1. " TFT     ,Transmit FIFO threshold"
line.long 0x04 "RXFTLR,Receive FIFO Threshold Level Register"
hexmask.long.byte 0x04 0.--7. 1. " RFT     ,Receive FIFO threshold"
rgroup.long 0x20++0x0B
line.long 0x00 "TXFLR,Transmit FIFO Level Register"
hexmask.long.word 0x00 0.--8. 1. " TXTFL   ,Transmit FIFO level"
line.long 0x04 "RXFLR,Receive FIFO Level Register"
hexmask.long.word 0x04 0.--8. 1. " RXTFL   ,Receive FIFO level"
line.long 0x08 "SR,Status Register"
bitfld.long 0x08 6. " DCOL    ,Data collision error" "No error,Error"
newline
bitfld.long 0x08 4. " RFF     ,Receive FIFO full" "Not full,Full"
bitfld.long 0x08 3. "       RFNE   ,Receive FIFO not empty" "No,Yes"
newline
bitfld.long 0x08 2. " TFE     ,Transmit FIFO empty" "Not empty,Empty"
bitfld.long 0x08 1. "      TFNF   ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x08 0. "             BUSY  ,SSI busy flag" "Idle,Busy"
group.long 0x2C++0x03
line.long 0x00 "IMR,Interrupt Mask Register"
bitfld.long 0x00 5. " MSTIM   ,Multi-master contention interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x00 4. " RXFIM   ,Receive FIFO full interrupt mask" "Masked,Not masked"
bitfld.long 0x00 3. "     RXOIM  ,Receive FIFO overflow interrupt mask" "Masked,Not masked"
bitfld.long 0x00 2. "      RXUIM ,Receive FIFO underflow interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x00 1. " TXOIM   ,Transmit FIFO overflow interrupt mask" "Masked,Not masked"
bitfld.long 0x00 0. "     TXEIM  ,Transmit FIFO empty interrupt mask" "Masked,Not masked"
rgroup.long 0x30++0x07
line.long 0x00 "ISR,Interrupt Status Register"
bitfld.long 0x00 5. " MSTIS   ,Multi-master contention interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. " RXFIS   ,Receive FIFO full interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 3. "   RXOIS  ,Receive FIFO overflow interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 2. "    RXUIS ,Receive FIFO underflow interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. " TXOIS   ,Transmit FIFO overflow interrupt status" "No interrupt,Interrupt"
bitfld.long 0x00 0. "   TXEIS  ,Transmit FIFO empty interrupt status" "No interrupt,Interrupt"
line.long 0x04 "RISR,Raw Interrupt Status Register"
bitfld.long 0x04 5. " MSTIR   ,Multi-master contention raw interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x04 4. " RXFIR   ,Receive FIFO full raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 3. "   RXOIR  ,Receive FIFO overflow raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 2. "    RXUIR ,Receive FIFO underflow raw interrupt status" "No interrupt,Interrupt"
newline
bitfld.long 0x04 1. " TXOIR   ,Transmit FIFO overflow raw interrupt status" "No interrupt,Interrupt"
bitfld.long 0x04 0. "   TXEIR  ,Transmit FIFO empty raw interrupt status" "No interrupt,Interrupt"
newline
hgroup.long 0x38++0x03
hide.long 0x00 "TXOICR,Transmit FIFO Overflow Interrupt Clear Register"
in
hgroup.long 0x3C++0x03
hide.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register"
in
hgroup.long 0x40++0x03
hide.long 0x00 "RXUICR,Receive FIFO Underflow Interrupt Clear Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "MSTICR,Multi-Master Interrupt Clear Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "ICR,Interrupt Clear Register"
in
newline
group.long 0x4C++0x0B
line.long 0x00 "DMACR,DMA Control Register"
bitfld.long 0x00 1. " TDMAE  ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  RDMAE ,Receive DMA enable" "Disabled,Enabled"
line.long 0x04 "DMATDLR,DMA Transmit Data Level Register"
hexmask.long.byte 0x04 0.--7. 1. " DMATDL ,Transmit data level"
line.long 0x08 "DMARDLR,DMA Transmit Data Level Register"
hexmask.long.byte 0x08 0.--7. 1. " DMARDL ,Receive data level"
rgroup.long 0x58++0x07
line.long 0x00 "IDR,Identification Register"
line.long 0x04 "SSI_VERSION_ID,CoreKit Version ID Register"
newline
hgroup.long 0x60++0x03
hide.long 0x00 "DR0,Data Register 0"
in
hgroup.long 0x64++0x03
hide.long 0x00 "DR1,Data Register 1"
in
hgroup.long 0x68++0x03
hide.long 0x00 "DR2,Data Register 2"
in
hgroup.long 0x6C++0x03
hide.long 0x00 "DR3,Data Register 3"
in
hgroup.long 0x70++0x03
hide.long 0x00 "DR4,Data Register 4"
in
hgroup.long 0x74++0x03
hide.long 0x00 "DR5,Data Register 5"
in
hgroup.long 0x78++0x03
hide.long 0x00 "DR6,Data Register 6"
in
hgroup.long 0x7C++0x03
hide.long 0x00 "DR7,Data Register 7"
in
hgroup.long 0x80++0x03
hide.long 0x00 "DR8,Data Register 8"
in
hgroup.long 0x84++0x03
hide.long 0x00 "DR9,Data Register 9"
in
hgroup.long 0x88++0x03
hide.long 0x00 "DR10,Data Register 10"
in
hgroup.long 0x8C++0x03
hide.long 0x00 "DR11,Data Register 11"
in
hgroup.long 0x90++0x03
hide.long 0x00 "DR12,Data Register 12"
in
hgroup.long 0x94++0x03
hide.long 0x00 "DR13,Data Register 13"
in
hgroup.long 0x98++0x03
hide.long 0x00 "DR14,Data Register 14"
in
hgroup.long 0x9C++0x03
hide.long 0x00 "DR15,Data Register 15"
in
hgroup.long 0xA0++0x03
hide.long 0x00 "DR16,Data Register 16"
in
hgroup.long 0xA4++0x03
hide.long 0x00 "DR17,Data Register 17"
in
hgroup.long 0xA8++0x03
hide.long 0x00 "DR18,Data Register 18"
in
hgroup.long 0xAC++0x03
hide.long 0x00 "DR19,Data Register 19"
in
hgroup.long 0xB0++0x03
hide.long 0x00 "DR20,Data Register 20"
in
hgroup.long 0xB4++0x03
hide.long 0x00 "DR21,Data Register 21"
in
hgroup.long 0xB8++0x03
hide.long 0x00 "DR22,Data Register 22"
in
hgroup.long 0xBC++0x03
hide.long 0x00 "DR23,Data Register 23"
in
hgroup.long 0xC0++0x03
hide.long 0x00 "DR24,Data Register 24"
in
hgroup.long 0xC4++0x03
hide.long 0x00 "DR25,Data Register 25"
in
hgroup.long 0xC8++0x03
hide.long 0x00 "DR26,Data Register 26"
in
hgroup.long 0xCC++0x03
hide.long 0x00 "DR27,Data Register 27"
in
hgroup.long 0xD0++0x03
hide.long 0x00 "DR28,Data Register 28"
in
hgroup.long 0xD4++0x03
hide.long 0x00 "DR29,Data Register 29"
in
hgroup.long 0xD8++0x03
hide.long 0x00 "DR30,Data Register 30"
in
hgroup.long 0xDC++0x03
hide.long 0x00 "DR31,Data Register 31"
in
hgroup.long 0xE0++0x03
hide.long 0x00 "DR32,Data Register 32"
in
hgroup.long 0xE4++0x03
hide.long 0x00 "DR33,Data Register 33"
in
hgroup.long 0xE8++0x03
hide.long 0x00 "DR34,Data Register 34"
in
hgroup.long 0xEC++0x03
hide.long 0x00 "DR35,Data Register 35"
in
newline
group.long 0xF0++0x03
line.long 0x00 "RX_SAMPLE_DLY,RX Sample Delay Register"
hexmask.long.byte 0x00 0.--7. 1. " RSD ,Rxd sample delay"
width 0x0B
tree.end
tree.end
tree.end
tree.open "I2C (Inter-Integrated Circuit)"
tree "I2C_0"
base ad:0xFFC02800
width 23.
group.long 0x00++0x0B
line.long 0x00 "CON,I2C Control Register"
rbitfld.long 0x00 10. " STOP_DET_IF_MASTER_ACTIVE ,Stop detection if active only enable" "Disabled,Enabled"
rbitfld.long 0x00 9. "        RX_FIFO_FULL_HLD_CTRL ,Bus control when Rx FIFO is full" "Overflow,Hold"
bitfld.long 0x00 8. "     TX_EMPTY_CTRL       ,Generation of the TX_EMPTY interrupt control" "Default,Controlled"
bitfld.long 0x00 7. "    STOP_DET_IFADDRESSED ,Stop detection only if addressed enable" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " IC_SLAVE_DISABLE          ,Slave disable" "No,Yes"
bitfld.long 0x00 5. "             IC_RESTART_EN         ,I2C restart enable" "Disabled,Enabled"
rbitfld.long 0x00 4. "     IC_10BITADDR_MASTER ,Master addressing mode" "7-bit,10-bit"
newline
bitfld.long 0x00 3. " IC_10BITADDR_SLAVE        ,Slave addressing mode" "7-bit,10-bit"
bitfld.long 0x00 1.--2. "          SPEED                 ,Speed at which the DW_apb_i2c operates" ",Standard,Fast,High"
bitfld.long 0x00 0. "     MASTER_MODE         ,Master mode enable" "Disabled,Enabled"
line.long 0x04 "TAR,I2C Target Address Register"
bitfld.long 0x04 12. " IC_10BITADDR_MASTER       ,Address transmission format" "7-bit,10-bit"
bitfld.long 0x04 11. "          SPECIAL               ,Programming of GENERAL_CALL or START_BYTE transmission enable" "Disabled,Enabled"
bitfld.long 0x04 10. "     GC_OR_START         ,Byte transmission select" "GENRAL_CALL,START"
hexmask.long.word 0x04 0.--9. 0x01 "   IC_TAR               ,Target address for any master transaction"
line.long 0x08 "SAR,I2C Slave Address Register"
hexmask.long.word 0x08 0.--9. 0x01 " IC_SAR                    ,Target address for slave operations"
group.long 0x10++0x03
line.long 0x00 "DATA_CMD,I2C Rx/Tx Data Buffer and Command Register"
rbitfld.long 0x00 11. " FIRST_DATA_BYTE           ,The first data byte received" "Sequential,Non sequential"
bitfld.long 0x00 10. "  RESTART               ,Restart before this command issue" "Don't issue,Issue"
bitfld.long 0x00 9. "  STOP                ,Stop after this command issue" "Don't issue,Issue"
newline
bitfld.long 0x00 8. " CMD                       ,Master command type select" "Write,Read"
hexmask.long.byte 0x00 0.--7. 1. "           DAT                   ,Data to be transmitted or received on the I2C bus"
group.long 0x14++0x07
line.long 0x00 "SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_SS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_LCNT            ,SCL clock low period count"
group.long 0x18++0x07
line.long 0x00 "FS_SCL_HCNT,Fast Mode I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_FS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "FS_SCL_LCNT,Fast Mode I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_FS_SCL_LCNT            ,SCL clock low period count"
rgroup.long 0x2C++0x03
line.long 0x00 "INTR_STAT,I2C Interrupt Status Register"
bitfld.long 0x00 14. " RSVD_R_SCL_STUCK_AT_LOW   ,SCL line stuck at low interrupt active" "Not active,Active"
bitfld.long 0x00 13. "      R_MASTER_ON_HOLD      ,Master is holding the bus and TX FIFO is empty interrupt active" "Not active,Active"
bitfld.long 0x00 12. "   R_RESTART_DET       ,Restart condition has occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 11. "  R_GEN_CALL           ,General call address interrupt active" "Not active,Active"
newline
bitfld.long 0x00 10. " R_START_DET               ,Start or restart condition occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 9. "    R_STOP_DET            ,R_STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "   R_ACTIVITY          ,R_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "    R_RX_DONE            ,R_RX_DONE interrupt active" "Not active,Active"
newline
bitfld.long 0x00 6. " R_TX_ABRT                 ,R_TX_ABRT interrupt active" "Not active,Active"
bitfld.long 0x00 5. "      R_RD_REQ              ,R_RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "   R_TX_EMPTY          ,R_TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "    R_TX_OVER            ,R_TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " R_RX_FULL                 ,R_RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      R_RX_OVER             ,R_RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   R_RX_UNDER          ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x30++0x03
line.long 0x00 "INTR_MASK,I2C Interrupt Mask Register"
bitfld.long 0x00 13. " M_MASTER_ON_HOLD          ,MASTER_ON_HOLD interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 12. "        M_RESTART_DET         ,RESTART_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 11. "     M_GEN_CALL          ,GEN_CALL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 10. "      M_START_DET          ,START_DET interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 9. " M_STOP_DET                ,STOP_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 8. "        M_ACTIVITY            ,ACTIVITY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 7. "     M_RX_DONE           ,RX_DONE interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 6. "      M_TX_ABRT            ,TX_ABRT interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 5. " M_RD_REQ                  ,RD_REQ interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 4. "        M_TX_EMPTY            ,TX_EMPTY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 3. "     M_TX_OVER           ,TX_OVER interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 2. " M_RX_FULL                 ,RX_FULL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 1. "        M_RX_OVER             ,RX_OVER interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 0. "     M_RX_UNDER          ,RX_UNDER interrupt mask" "Masked,Unmasked"
rgroup.long 0x34++0x03
line.long 0x00 "RAW_INTR_STAT,I2C Raw Interrupt Status Register"
bitfld.long 0x00 13. " MASTER_ON_HOLD            ,MASTER_ON_HOLD interrupt active" "Not active,Active"
bitfld.long 0x00 12. "      RESTART_DET           ,RESTART_DET interrupt active" "Not active,Active"
bitfld.long 0x00 11. "   GEN_CALL            ,GEN_CALL interrupt active" "Not active,Active"
bitfld.long 0x00 10. "    START_DET            ,START_DET interrupt active" "Not active,Active"
newline
bitfld.long 0x00 9. " STOP_DET                  ,STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "      RAW_INTR_ACTIVITY     ,RAW_INTR_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "   RX_DONE             ,RX_DONE interrupt active" "Not active,Active"
bitfld.long 0x00 6. "    TX_ABRT              ,TX_ABRT interrupt active" "Not active,Active"
newline
bitfld.long 0x00 5. " RD_REQ                    ,RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "      TX_EMPTY              ,TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "   TX_OVER             ,TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " RX_FULL                   ,RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      RX_OVER               ,RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   RX_UNDER            ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x38++0x07
line.long 0x00 "RX_TL,I2C Receive FIFO Threshold Register"
hexmask.long.byte 0x00 0.--7. 1. " RX_TL                     ,Receive FIFO threshold level"
line.long 0x04 "TX_TL,I2C Transmit FIFO Threshold Register"
hexmask.long.byte 0x04 0.--7. 1. " TX_TL                     ,Transmit FIFO threshold level"
newline
hgroup.long 0x40++0x03
hide.long 0x00 "CLR_INTR,Clear Combined and Individual Interrupt Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "CLR_RX_UNDER,Clear RX_UNDER Interrupt Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "CLR_RX_OVER,Clear RX_OVER Interrupt Register"
in
hgroup.long 0x4C++0x03
hide.long 0x00 "CLR_TX_OVER,Clear TX_OVER Interrupt Register"
in
hgroup.long 0x50++0x03
hide.long 0x00 "CLR_RD_REQ,Clear RD_REQ Interrupt Register"
in
hgroup.long 0x54++0x03
hide.long 0x00 "CLR_TX_ABRT,Clear TX_ABRT Interrupt Register"
in
hgroup.long 0x58++0x03
hide.long 0x00 "CLR_RX_DONE,Clear RX_DONE Interrupt Register"
in
hgroup.long 0x5C++0x03
hide.long 0x00 "CLR_ACTIVITY,Clear ACTIVITY Interrupt Register"
in
hgroup.long 0x60++0x03
hide.long 0x00 "CLR_STOP_DET,Clear STOP_DET Interrupt Register"
in
hgroup.long 0x64++0x03
hide.long 0x00 "CLR_START_DET,Clear START_DET Interrupt Register"
in
hgroup.long 0x68++0x03
hide.long 0x00 "CLR_GEN_CALL,Clear GEN_CALL Interrupt Register"
in
newline
group.long 0x6C++0x03
line.long 0x00 "IC_ENABLE,I2C Enable Register"
bitfld.long 0x00 2. " TX_CMD_BLOCK            ,Tx command execution block" "Not blocked,Blocked"
bitfld.long 0x00 1. "    ABORT              ,ABORT operation in progress" "Not in progress,In progress"
bitfld.long 0x00 0. "  ENABLE             ,I2C enable" "Disabled,Enabled"
rgroup.long 0x70++0x0B
line.long 0x00 "IC_STATUS,I2C Status Register"
bitfld.long 0x00 6. " SLV_ACTIVITY            ,Slave FSM activity status" "Idle,Active"
bitfld.long 0x00 5. "         MST_ACTIVITY       ,Master FSM activity status" "Idle,Active"
bitfld.long 0x00 4. "           RFF                ,Receive FIFO completely full" "Not full,Full"
newline
bitfld.long 0x00 3. " RFNE                    ,Receive FIFO not empty" "No,Yes"
bitfld.long 0x00 2. "            TFE                ,Transmit FIFO completely empty" "Not empty,Empty"
newline
bitfld.long 0x00 1. " TFNF                    ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x00 0. "            IC_STATUS_ACTIVITY ,I2C activity status" "Idle,Active"
line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register"
hexmask.long.byte 0x04 0.--6. 1. " TXFLR                   ,Transmit FIFO level"
line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register"
hexmask.long.byte 0x08 0.--6. 1. " RXFLR                   ,Receive FIFO level"
group.long 0x7C++0x03
line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Time Length Register"
hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD          ,Required SDA Rx hold time"
hexmask.long.word 0x00 0.--15. 1. "             IC_SDA_TX_HOLD     ,Required SDA Tx hold time"
if (((per.l(ad:0xFFC02800))&0x01)==0x01)
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 16. "           ABRT_USER_ABRT     ,Transfer abort detected by master" "Not detected,Detected"
bitfld.long 0x00 15. "     ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "  ABRT_SLV_ARBLOST    ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
else
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 15. "           ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "     ABRT_SLV_ARBLOST   ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
endif
group.long 0x84++0x17
line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register"
bitfld.long 0x00 0. " NACK                    ,Generate NACK" "Not generated,Generated"
line.long 0x04 "IC_DMA_CR,DMA Control Register"
bitfld.long 0x04 1. " TDMAE                   ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x04 0. "       RDMAE              ,Receive DMA enable" "Disabled,Enabled"
line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register"
bitfld.long 0x08 0.--5. " DMATDL                  ,Transmit data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x0C "IC_DMA_RDLR,DMA Receive Data Level Register"
bitfld.long 0x0C 0.--5. " DMARDL                  ,Receive data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register"
hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP               ,SDA setup"
line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register"
bitfld.long 0x14 0. " ACK_GEN_CALL            ,ACK general call generate" "Not generated,Generated"
rgroup.long 0x9C++0x03
line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register"
bitfld.long 0x00 2. " SLV_RX_DATA_LOST        ,Slave received data lost" "Not lost,Lost"
newline
bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave disabled while busy" "No,Yes"
bitfld.long 0x00 0. "            IC_EN              ,IC_EN status" "Disabled,Enabled"
if (((per.l(ad:0xFFC02800+0x6C))&0x01)==0x00)
group.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
else
rgroup.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
endif
newline
hgroup.long 0xA8++0x03
hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register"
in
newline
rgroup.long 0xF4++0x0B
line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1"
hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,IC_TX_BUFFER_DEPTH coreConsultant parameter"
hexmask.long.byte 0x00 8.--15. 1. "          RX_BUFFER_DEPTH ,IC_RX_BUFFER_DEPTH coreConsultant parameter"
bitfld.long 0x00 7. "        ADD_ENCODED_PARAMS ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 6. "  HAS_DMA        ,DMA handshaking signals status" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " INTR_IO         ,Interrupt outputs" "Individual,Combined"
bitfld.long 0x00 4. "  HC_COUNT_VALUES ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "  MAX_SPEED_MODE     ,IC max speed mode" ",Standard,Fast,High"
bitfld.long 0x00 0.--1. "  APB_DATA_WIDTH ,APB data bus width" "8 bits,16 bits,32 bits,?..."
line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register"
line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register"
width 0x0B
tree.end
tree "I2C_1"
base ad:0xFFC02900
width 23.
group.long 0x00++0x0B
line.long 0x00 "CON,I2C Control Register"
rbitfld.long 0x00 10. " STOP_DET_IF_MASTER_ACTIVE ,Stop detection if active only enable" "Disabled,Enabled"
rbitfld.long 0x00 9. "        RX_FIFO_FULL_HLD_CTRL ,Bus control when Rx FIFO is full" "Overflow,Hold"
bitfld.long 0x00 8. "     TX_EMPTY_CTRL       ,Generation of the TX_EMPTY interrupt control" "Default,Controlled"
bitfld.long 0x00 7. "    STOP_DET_IFADDRESSED ,Stop detection only if addressed enable" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " IC_SLAVE_DISABLE          ,Slave disable" "No,Yes"
bitfld.long 0x00 5. "             IC_RESTART_EN         ,I2C restart enable" "Disabled,Enabled"
rbitfld.long 0x00 4. "     IC_10BITADDR_MASTER ,Master addressing mode" "7-bit,10-bit"
newline
bitfld.long 0x00 3. " IC_10BITADDR_SLAVE        ,Slave addressing mode" "7-bit,10-bit"
bitfld.long 0x00 1.--2. "          SPEED                 ,Speed at which the DW_apb_i2c operates" ",Standard,Fast,High"
bitfld.long 0x00 0. "     MASTER_MODE         ,Master mode enable" "Disabled,Enabled"
line.long 0x04 "TAR,I2C Target Address Register"
bitfld.long 0x04 12. " IC_10BITADDR_MASTER       ,Address transmission format" "7-bit,10-bit"
bitfld.long 0x04 11. "          SPECIAL               ,Programming of GENERAL_CALL or START_BYTE transmission enable" "Disabled,Enabled"
bitfld.long 0x04 10. "     GC_OR_START         ,Byte transmission select" "GENRAL_CALL,START"
hexmask.long.word 0x04 0.--9. 0x01 "   IC_TAR               ,Target address for any master transaction"
line.long 0x08 "SAR,I2C Slave Address Register"
hexmask.long.word 0x08 0.--9. 0x01 " IC_SAR                    ,Target address for slave operations"
group.long 0x10++0x03
line.long 0x00 "DATA_CMD,I2C Rx/Tx Data Buffer and Command Register"
rbitfld.long 0x00 11. " FIRST_DATA_BYTE           ,The first data byte received" "Sequential,Non sequential"
bitfld.long 0x00 10. "  RESTART               ,Restart before this command issue" "Don't issue,Issue"
bitfld.long 0x00 9. "  STOP                ,Stop after this command issue" "Don't issue,Issue"
newline
bitfld.long 0x00 8. " CMD                       ,Master command type select" "Write,Read"
hexmask.long.byte 0x00 0.--7. 1. "           DAT                   ,Data to be transmitted or received on the I2C bus"
group.long 0x14++0x07
line.long 0x00 "SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_SS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_LCNT            ,SCL clock low period count"
group.long 0x18++0x07
line.long 0x00 "FS_SCL_HCNT,Fast Mode I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_FS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "FS_SCL_LCNT,Fast Mode I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_FS_SCL_LCNT            ,SCL clock low period count"
rgroup.long 0x2C++0x03
line.long 0x00 "INTR_STAT,I2C Interrupt Status Register"
bitfld.long 0x00 14. " RSVD_R_SCL_STUCK_AT_LOW   ,SCL line stuck at low interrupt active" "Not active,Active"
bitfld.long 0x00 13. "      R_MASTER_ON_HOLD      ,Master is holding the bus and TX FIFO is empty interrupt active" "Not active,Active"
bitfld.long 0x00 12. "   R_RESTART_DET       ,Restart condition has occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 11. "  R_GEN_CALL           ,General call address interrupt active" "Not active,Active"
newline
bitfld.long 0x00 10. " R_START_DET               ,Start or restart condition occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 9. "    R_STOP_DET            ,R_STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "   R_ACTIVITY          ,R_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "    R_RX_DONE            ,R_RX_DONE interrupt active" "Not active,Active"
newline
bitfld.long 0x00 6. " R_TX_ABRT                 ,R_TX_ABRT interrupt active" "Not active,Active"
bitfld.long 0x00 5. "      R_RD_REQ              ,R_RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "   R_TX_EMPTY          ,R_TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "    R_TX_OVER            ,R_TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " R_RX_FULL                 ,R_RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      R_RX_OVER             ,R_RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   R_RX_UNDER          ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x30++0x03
line.long 0x00 "INTR_MASK,I2C Interrupt Mask Register"
bitfld.long 0x00 13. " M_MASTER_ON_HOLD          ,MASTER_ON_HOLD interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 12. "        M_RESTART_DET         ,RESTART_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 11. "     M_GEN_CALL          ,GEN_CALL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 10. "      M_START_DET          ,START_DET interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 9. " M_STOP_DET                ,STOP_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 8. "        M_ACTIVITY            ,ACTIVITY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 7. "     M_RX_DONE           ,RX_DONE interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 6. "      M_TX_ABRT            ,TX_ABRT interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 5. " M_RD_REQ                  ,RD_REQ interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 4. "        M_TX_EMPTY            ,TX_EMPTY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 3. "     M_TX_OVER           ,TX_OVER interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 2. " M_RX_FULL                 ,RX_FULL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 1. "        M_RX_OVER             ,RX_OVER interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 0. "     M_RX_UNDER          ,RX_UNDER interrupt mask" "Masked,Unmasked"
rgroup.long 0x34++0x03
line.long 0x00 "RAW_INTR_STAT,I2C Raw Interrupt Status Register"
bitfld.long 0x00 13. " MASTER_ON_HOLD            ,MASTER_ON_HOLD interrupt active" "Not active,Active"
bitfld.long 0x00 12. "      RESTART_DET           ,RESTART_DET interrupt active" "Not active,Active"
bitfld.long 0x00 11. "   GEN_CALL            ,GEN_CALL interrupt active" "Not active,Active"
bitfld.long 0x00 10. "    START_DET            ,START_DET interrupt active" "Not active,Active"
newline
bitfld.long 0x00 9. " STOP_DET                  ,STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "      RAW_INTR_ACTIVITY     ,RAW_INTR_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "   RX_DONE             ,RX_DONE interrupt active" "Not active,Active"
bitfld.long 0x00 6. "    TX_ABRT              ,TX_ABRT interrupt active" "Not active,Active"
newline
bitfld.long 0x00 5. " RD_REQ                    ,RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "      TX_EMPTY              ,TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "   TX_OVER             ,TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " RX_FULL                   ,RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      RX_OVER               ,RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   RX_UNDER            ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x38++0x07
line.long 0x00 "RX_TL,I2C Receive FIFO Threshold Register"
hexmask.long.byte 0x00 0.--7. 1. " RX_TL                     ,Receive FIFO threshold level"
line.long 0x04 "TX_TL,I2C Transmit FIFO Threshold Register"
hexmask.long.byte 0x04 0.--7. 1. " TX_TL                     ,Transmit FIFO threshold level"
newline
hgroup.long 0x40++0x03
hide.long 0x00 "CLR_INTR,Clear Combined and Individual Interrupt Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "CLR_RX_UNDER,Clear RX_UNDER Interrupt Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "CLR_RX_OVER,Clear RX_OVER Interrupt Register"
in
hgroup.long 0x4C++0x03
hide.long 0x00 "CLR_TX_OVER,Clear TX_OVER Interrupt Register"
in
hgroup.long 0x50++0x03
hide.long 0x00 "CLR_RD_REQ,Clear RD_REQ Interrupt Register"
in
hgroup.long 0x54++0x03
hide.long 0x00 "CLR_TX_ABRT,Clear TX_ABRT Interrupt Register"
in
hgroup.long 0x58++0x03
hide.long 0x00 "CLR_RX_DONE,Clear RX_DONE Interrupt Register"
in
hgroup.long 0x5C++0x03
hide.long 0x00 "CLR_ACTIVITY,Clear ACTIVITY Interrupt Register"
in
hgroup.long 0x60++0x03
hide.long 0x00 "CLR_STOP_DET,Clear STOP_DET Interrupt Register"
in
hgroup.long 0x64++0x03
hide.long 0x00 "CLR_START_DET,Clear START_DET Interrupt Register"
in
hgroup.long 0x68++0x03
hide.long 0x00 "CLR_GEN_CALL,Clear GEN_CALL Interrupt Register"
in
newline
group.long 0x6C++0x03
line.long 0x00 "IC_ENABLE,I2C Enable Register"
bitfld.long 0x00 2. " TX_CMD_BLOCK            ,Tx command execution block" "Not blocked,Blocked"
bitfld.long 0x00 1. "    ABORT              ,ABORT operation in progress" "Not in progress,In progress"
bitfld.long 0x00 0. "  ENABLE             ,I2C enable" "Disabled,Enabled"
rgroup.long 0x70++0x0B
line.long 0x00 "IC_STATUS,I2C Status Register"
bitfld.long 0x00 6. " SLV_ACTIVITY            ,Slave FSM activity status" "Idle,Active"
bitfld.long 0x00 5. "         MST_ACTIVITY       ,Master FSM activity status" "Idle,Active"
bitfld.long 0x00 4. "           RFF                ,Receive FIFO completely full" "Not full,Full"
newline
bitfld.long 0x00 3. " RFNE                    ,Receive FIFO not empty" "No,Yes"
bitfld.long 0x00 2. "            TFE                ,Transmit FIFO completely empty" "Not empty,Empty"
newline
bitfld.long 0x00 1. " TFNF                    ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x00 0. "            IC_STATUS_ACTIVITY ,I2C activity status" "Idle,Active"
line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register"
hexmask.long.byte 0x04 0.--6. 1. " TXFLR                   ,Transmit FIFO level"
line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register"
hexmask.long.byte 0x08 0.--6. 1. " RXFLR                   ,Receive FIFO level"
group.long 0x7C++0x03
line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Time Length Register"
hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD          ,Required SDA Rx hold time"
hexmask.long.word 0x00 0.--15. 1. "             IC_SDA_TX_HOLD     ,Required SDA Tx hold time"
if (((per.l(ad:0xFFC02900))&0x01)==0x01)
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 16. "           ABRT_USER_ABRT     ,Transfer abort detected by master" "Not detected,Detected"
bitfld.long 0x00 15. "     ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "  ABRT_SLV_ARBLOST    ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
else
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 15. "           ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "     ABRT_SLV_ARBLOST   ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
endif
group.long 0x84++0x17
line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register"
bitfld.long 0x00 0. " NACK                    ,Generate NACK" "Not generated,Generated"
line.long 0x04 "IC_DMA_CR,DMA Control Register"
bitfld.long 0x04 1. " TDMAE                   ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x04 0. "       RDMAE              ,Receive DMA enable" "Disabled,Enabled"
line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register"
bitfld.long 0x08 0.--5. " DMATDL                  ,Transmit data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x0C "IC_DMA_RDLR,DMA Receive Data Level Register"
bitfld.long 0x0C 0.--5. " DMARDL                  ,Receive data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register"
hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP               ,SDA setup"
line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register"
bitfld.long 0x14 0. " ACK_GEN_CALL            ,ACK general call generate" "Not generated,Generated"
rgroup.long 0x9C++0x03
line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register"
bitfld.long 0x00 2. " SLV_RX_DATA_LOST        ,Slave received data lost" "Not lost,Lost"
newline
bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave disabled while busy" "No,Yes"
bitfld.long 0x00 0. "            IC_EN              ,IC_EN status" "Disabled,Enabled"
if (((per.l(ad:0xFFC02900+0x6C))&0x01)==0x00)
group.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
else
rgroup.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
endif
newline
hgroup.long 0xA8++0x03
hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register"
in
newline
rgroup.long 0xF4++0x0B
line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1"
hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,IC_TX_BUFFER_DEPTH coreConsultant parameter"
hexmask.long.byte 0x00 8.--15. 1. "          RX_BUFFER_DEPTH ,IC_RX_BUFFER_DEPTH coreConsultant parameter"
bitfld.long 0x00 7. "        ADD_ENCODED_PARAMS ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 6. "  HAS_DMA        ,DMA handshaking signals status" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " INTR_IO         ,Interrupt outputs" "Individual,Combined"
bitfld.long 0x00 4. "  HC_COUNT_VALUES ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "  MAX_SPEED_MODE     ,IC max speed mode" ",Standard,Fast,High"
bitfld.long 0x00 0.--1. "  APB_DATA_WIDTH ,APB data bus width" "8 bits,16 bits,32 bits,?..."
line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register"
line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register"
width 0x0B
tree.end
tree.end
tree.open "I2C_EMAC (Inter-Integrated Circuit EMAC)"
tree "I2C_EMAC_0"
base ad:0xFFC02A00
width 23.
group.long 0x00++0x0B
line.long 0x00 "CON,I2C Control Register"
rbitfld.long 0x00 10. " STOP_DET_IF_MASTER_ACTIVE ,Stop detection if active only enable" "Disabled,Enabled"
rbitfld.long 0x00 9. "        RX_FIFO_FULL_HLD_CTRL ,Bus control when Rx FIFO is full" "Overflow,Hold"
bitfld.long 0x00 8. "     TX_EMPTY_CTRL       ,Generation of the TX_EMPTY interrupt control" "Default,Controlled"
bitfld.long 0x00 7. "    STOP_DET_IFADDRESSED ,Stop detection only if addressed enable" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " IC_SLAVE_DISABLE          ,Slave disable" "No,Yes"
bitfld.long 0x00 5. "             IC_RESTART_EN         ,I2C restart enable" "Disabled,Enabled"
rbitfld.long 0x00 4. "     IC_10BITADDR_MASTER ,Master addressing mode" "7-bit,10-bit"
newline
bitfld.long 0x00 3. " IC_10BITADDR_SLAVE        ,Slave addressing mode" "7-bit,10-bit"
bitfld.long 0x00 1.--2. "          SPEED                 ,Speed at which the DW_apb_i2c operates" ",Standard,Fast,High"
bitfld.long 0x00 0. "     MASTER_MODE         ,Master mode enable" "Disabled,Enabled"
line.long 0x04 "TAR,I2C Target Address Register"
bitfld.long 0x04 12. " IC_10BITADDR_MASTER       ,Address transmission format" "7-bit,10-bit"
bitfld.long 0x04 11. "          SPECIAL               ,Programming of GENERAL_CALL or START_BYTE transmission enable" "Disabled,Enabled"
bitfld.long 0x04 10. "     GC_OR_START         ,Byte transmission select" "GENRAL_CALL,START"
hexmask.long.word 0x04 0.--9. 0x01 "   IC_TAR               ,Target address for any master transaction"
line.long 0x08 "SAR,I2C Slave Address Register"
hexmask.long.word 0x08 0.--9. 0x01 " IC_SAR                    ,Target address for slave operations"
group.long 0x10++0x03
line.long 0x00 "DATA_CMD,I2C Rx/Tx Data Buffer and Command Register"
rbitfld.long 0x00 11. " FIRST_DATA_BYTE           ,The first data byte received" "Sequential,Non sequential"
bitfld.long 0x00 10. "  RESTART               ,Restart before this command issue" "Don't issue,Issue"
bitfld.long 0x00 9. "  STOP                ,Stop after this command issue" "Don't issue,Issue"
newline
bitfld.long 0x00 8. " CMD                       ,Master command type select" "Write,Read"
hexmask.long.byte 0x00 0.--7. 1. "           DAT                   ,Data to be transmitted or received on the I2C bus"
group.long 0x14++0x07
line.long 0x00 "SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_SS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_LCNT            ,SCL clock low period count"
group.long 0x18++0x07
line.long 0x00 "FS_SCL_HCNT,Fast Mode I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_FS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "FS_SCL_LCNT,Fast Mode I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_FS_SCL_LCNT            ,SCL clock low period count"
rgroup.long 0x2C++0x03
line.long 0x00 "INTR_STAT,I2C Interrupt Status Register"
bitfld.long 0x00 14. " RSVD_R_SCL_STUCK_AT_LOW   ,SCL line stuck at low interrupt active" "Not active,Active"
bitfld.long 0x00 13. "      R_MASTER_ON_HOLD      ,Master is holding the bus and TX FIFO is empty interrupt active" "Not active,Active"
bitfld.long 0x00 12. "   R_RESTART_DET       ,Restart condition has occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 11. "  R_GEN_CALL           ,General call address interrupt active" "Not active,Active"
newline
bitfld.long 0x00 10. " R_START_DET               ,Start or restart condition occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 9. "    R_STOP_DET            ,R_STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "   R_ACTIVITY          ,R_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "    R_RX_DONE            ,R_RX_DONE interrupt active" "Not active,Active"
newline
bitfld.long 0x00 6. " R_TX_ABRT                 ,R_TX_ABRT interrupt active" "Not active,Active"
bitfld.long 0x00 5. "      R_RD_REQ              ,R_RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "   R_TX_EMPTY          ,R_TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "    R_TX_OVER            ,R_TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " R_RX_FULL                 ,R_RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      R_RX_OVER             ,R_RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   R_RX_UNDER          ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x30++0x03
line.long 0x00 "INTR_MASK,I2C Interrupt Mask Register"
bitfld.long 0x00 13. " M_MASTER_ON_HOLD          ,MASTER_ON_HOLD interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 12. "        M_RESTART_DET         ,RESTART_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 11. "     M_GEN_CALL          ,GEN_CALL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 10. "      M_START_DET          ,START_DET interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 9. " M_STOP_DET                ,STOP_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 8. "        M_ACTIVITY            ,ACTIVITY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 7. "     M_RX_DONE           ,RX_DONE interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 6. "      M_TX_ABRT            ,TX_ABRT interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 5. " M_RD_REQ                  ,RD_REQ interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 4. "        M_TX_EMPTY            ,TX_EMPTY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 3. "     M_TX_OVER           ,TX_OVER interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 2. " M_RX_FULL                 ,RX_FULL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 1. "        M_RX_OVER             ,RX_OVER interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 0. "     M_RX_UNDER          ,RX_UNDER interrupt mask" "Masked,Unmasked"
rgroup.long 0x34++0x03
line.long 0x00 "RAW_INTR_STAT,I2C Raw Interrupt Status Register"
bitfld.long 0x00 13. " MASTER_ON_HOLD            ,MASTER_ON_HOLD interrupt active" "Not active,Active"
bitfld.long 0x00 12. "      RESTART_DET           ,RESTART_DET interrupt active" "Not active,Active"
bitfld.long 0x00 11. "   GEN_CALL            ,GEN_CALL interrupt active" "Not active,Active"
bitfld.long 0x00 10. "    START_DET            ,START_DET interrupt active" "Not active,Active"
newline
bitfld.long 0x00 9. " STOP_DET                  ,STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "      RAW_INTR_ACTIVITY     ,RAW_INTR_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "   RX_DONE             ,RX_DONE interrupt active" "Not active,Active"
bitfld.long 0x00 6. "    TX_ABRT              ,TX_ABRT interrupt active" "Not active,Active"
newline
bitfld.long 0x00 5. " RD_REQ                    ,RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "      TX_EMPTY              ,TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "   TX_OVER             ,TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " RX_FULL                   ,RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      RX_OVER               ,RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   RX_UNDER            ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x38++0x07
line.long 0x00 "RX_TL,I2C Receive FIFO Threshold Register"
hexmask.long.byte 0x00 0.--7. 1. " RX_TL                     ,Receive FIFO threshold level"
line.long 0x04 "TX_TL,I2C Transmit FIFO Threshold Register"
hexmask.long.byte 0x04 0.--7. 1. " TX_TL                     ,Transmit FIFO threshold level"
newline
hgroup.long 0x40++0x03
hide.long 0x00 "CLR_INTR,Clear Combined and Individual Interrupt Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "CLR_RX_UNDER,Clear RX_UNDER Interrupt Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "CLR_RX_OVER,Clear RX_OVER Interrupt Register"
in
hgroup.long 0x4C++0x03
hide.long 0x00 "CLR_TX_OVER,Clear TX_OVER Interrupt Register"
in
hgroup.long 0x50++0x03
hide.long 0x00 "CLR_RD_REQ,Clear RD_REQ Interrupt Register"
in
hgroup.long 0x54++0x03
hide.long 0x00 "CLR_TX_ABRT,Clear TX_ABRT Interrupt Register"
in
hgroup.long 0x58++0x03
hide.long 0x00 "CLR_RX_DONE,Clear RX_DONE Interrupt Register"
in
hgroup.long 0x5C++0x03
hide.long 0x00 "CLR_ACTIVITY,Clear ACTIVITY Interrupt Register"
in
hgroup.long 0x60++0x03
hide.long 0x00 "CLR_STOP_DET,Clear STOP_DET Interrupt Register"
in
hgroup.long 0x64++0x03
hide.long 0x00 "CLR_START_DET,Clear START_DET Interrupt Register"
in
hgroup.long 0x68++0x03
hide.long 0x00 "CLR_GEN_CALL,Clear GEN_CALL Interrupt Register"
in
newline
group.long 0x6C++0x03
line.long 0x00 "IC_ENABLE,I2C Enable Register"
bitfld.long 0x00 2. " TX_CMD_BLOCK            ,Tx command execution block" "Not blocked,Blocked"
bitfld.long 0x00 1. "    ABORT              ,ABORT operation in progress" "Not in progress,In progress"
bitfld.long 0x00 0. "  ENABLE             ,I2C enable" "Disabled,Enabled"
rgroup.long 0x70++0x0B
line.long 0x00 "IC_STATUS,I2C Status Register"
bitfld.long 0x00 6. " SLV_ACTIVITY            ,Slave FSM activity status" "Idle,Active"
bitfld.long 0x00 5. "         MST_ACTIVITY       ,Master FSM activity status" "Idle,Active"
bitfld.long 0x00 4. "           RFF                ,Receive FIFO completely full" "Not full,Full"
newline
bitfld.long 0x00 3. " RFNE                    ,Receive FIFO not empty" "No,Yes"
bitfld.long 0x00 2. "            TFE                ,Transmit FIFO completely empty" "Not empty,Empty"
newline
bitfld.long 0x00 1. " TFNF                    ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x00 0. "            IC_STATUS_ACTIVITY ,I2C activity status" "Idle,Active"
line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register"
hexmask.long.byte 0x04 0.--6. 1. " TXFLR                   ,Transmit FIFO level"
line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register"
hexmask.long.byte 0x08 0.--6. 1. " RXFLR                   ,Receive FIFO level"
group.long 0x7C++0x03
line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Time Length Register"
hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD          ,Required SDA Rx hold time"
hexmask.long.word 0x00 0.--15. 1. "             IC_SDA_TX_HOLD     ,Required SDA Tx hold time"
if (((per.l(ad:0xFFC02A00))&0x01)==0x01)
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 16. "           ABRT_USER_ABRT     ,Transfer abort detected by master" "Not detected,Detected"
bitfld.long 0x00 15. "     ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "  ABRT_SLV_ARBLOST    ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
else
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 15. "           ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "     ABRT_SLV_ARBLOST   ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
endif
group.long 0x84++0x17
line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register"
bitfld.long 0x00 0. " NACK                    ,Generate NACK" "Not generated,Generated"
line.long 0x04 "IC_DMA_CR,DMA Control Register"
bitfld.long 0x04 1. " TDMAE                   ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x04 0. "       RDMAE              ,Receive DMA enable" "Disabled,Enabled"
line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register"
bitfld.long 0x08 0.--5. " DMATDL                  ,Transmit data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x0C "IC_DMA_RDLR,DMA Receive Data Level Register"
bitfld.long 0x0C 0.--5. " DMARDL                  ,Receive data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register"
hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP               ,SDA setup"
line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register"
bitfld.long 0x14 0. " ACK_GEN_CALL            ,ACK general call generate" "Not generated,Generated"
rgroup.long 0x9C++0x03
line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register"
bitfld.long 0x00 2. " SLV_RX_DATA_LOST        ,Slave received data lost" "Not lost,Lost"
newline
bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave disabled while busy" "No,Yes"
bitfld.long 0x00 0. "            IC_EN              ,IC_EN status" "Disabled,Enabled"
if (((per.l(ad:0xFFC02A00+0x6C))&0x01)==0x00)
group.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
else
rgroup.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
endif
newline
hgroup.long 0xA8++0x03
hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register"
in
newline
rgroup.long 0xF4++0x0B
line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1"
hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,IC_TX_BUFFER_DEPTH coreConsultant parameter"
hexmask.long.byte 0x00 8.--15. 1. "          RX_BUFFER_DEPTH ,IC_RX_BUFFER_DEPTH coreConsultant parameter"
bitfld.long 0x00 7. "        ADD_ENCODED_PARAMS ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 6. "  HAS_DMA        ,DMA handshaking signals status" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " INTR_IO         ,Interrupt outputs" "Individual,Combined"
bitfld.long 0x00 4. "  HC_COUNT_VALUES ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "  MAX_SPEED_MODE     ,IC max speed mode" ",Standard,Fast,High"
bitfld.long 0x00 0.--1. "  APB_DATA_WIDTH ,APB data bus width" "8 bits,16 bits,32 bits,?..."
line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register"
line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register"
width 0x0B
tree.end
tree "I2C_EMAC_1"
base ad:0xFFC02B00
width 23.
group.long 0x00++0x0B
line.long 0x00 "CON,I2C Control Register"
rbitfld.long 0x00 10. " STOP_DET_IF_MASTER_ACTIVE ,Stop detection if active only enable" "Disabled,Enabled"
rbitfld.long 0x00 9. "        RX_FIFO_FULL_HLD_CTRL ,Bus control when Rx FIFO is full" "Overflow,Hold"
bitfld.long 0x00 8. "     TX_EMPTY_CTRL       ,Generation of the TX_EMPTY interrupt control" "Default,Controlled"
bitfld.long 0x00 7. "    STOP_DET_IFADDRESSED ,Stop detection only if addressed enable" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " IC_SLAVE_DISABLE          ,Slave disable" "No,Yes"
bitfld.long 0x00 5. "             IC_RESTART_EN         ,I2C restart enable" "Disabled,Enabled"
rbitfld.long 0x00 4. "     IC_10BITADDR_MASTER ,Master addressing mode" "7-bit,10-bit"
newline
bitfld.long 0x00 3. " IC_10BITADDR_SLAVE        ,Slave addressing mode" "7-bit,10-bit"
bitfld.long 0x00 1.--2. "          SPEED                 ,Speed at which the DW_apb_i2c operates" ",Standard,Fast,High"
bitfld.long 0x00 0. "     MASTER_MODE         ,Master mode enable" "Disabled,Enabled"
line.long 0x04 "TAR,I2C Target Address Register"
bitfld.long 0x04 12. " IC_10BITADDR_MASTER       ,Address transmission format" "7-bit,10-bit"
bitfld.long 0x04 11. "          SPECIAL               ,Programming of GENERAL_CALL or START_BYTE transmission enable" "Disabled,Enabled"
bitfld.long 0x04 10. "     GC_OR_START         ,Byte transmission select" "GENRAL_CALL,START"
hexmask.long.word 0x04 0.--9. 0x01 "   IC_TAR               ,Target address for any master transaction"
line.long 0x08 "SAR,I2C Slave Address Register"
hexmask.long.word 0x08 0.--9. 0x01 " IC_SAR                    ,Target address for slave operations"
group.long 0x10++0x03
line.long 0x00 "DATA_CMD,I2C Rx/Tx Data Buffer and Command Register"
rbitfld.long 0x00 11. " FIRST_DATA_BYTE           ,The first data byte received" "Sequential,Non sequential"
bitfld.long 0x00 10. "  RESTART               ,Restart before this command issue" "Don't issue,Issue"
bitfld.long 0x00 9. "  STOP                ,Stop after this command issue" "Don't issue,Issue"
newline
bitfld.long 0x00 8. " CMD                       ,Master command type select" "Write,Read"
hexmask.long.byte 0x00 0.--7. 1. "           DAT                   ,Data to be transmitted or received on the I2C bus"
group.long 0x14++0x07
line.long 0x00 "SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_SS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_LCNT            ,SCL clock low period count"
group.long 0x18++0x07
line.long 0x00 "FS_SCL_HCNT,Fast Mode I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_FS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "FS_SCL_LCNT,Fast Mode I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_FS_SCL_LCNT            ,SCL clock low period count"
rgroup.long 0x2C++0x03
line.long 0x00 "INTR_STAT,I2C Interrupt Status Register"
bitfld.long 0x00 14. " RSVD_R_SCL_STUCK_AT_LOW   ,SCL line stuck at low interrupt active" "Not active,Active"
bitfld.long 0x00 13. "      R_MASTER_ON_HOLD      ,Master is holding the bus and TX FIFO is empty interrupt active" "Not active,Active"
bitfld.long 0x00 12. "   R_RESTART_DET       ,Restart condition has occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 11. "  R_GEN_CALL           ,General call address interrupt active" "Not active,Active"
newline
bitfld.long 0x00 10. " R_START_DET               ,Start or restart condition occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 9. "    R_STOP_DET            ,R_STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "   R_ACTIVITY          ,R_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "    R_RX_DONE            ,R_RX_DONE interrupt active" "Not active,Active"
newline
bitfld.long 0x00 6. " R_TX_ABRT                 ,R_TX_ABRT interrupt active" "Not active,Active"
bitfld.long 0x00 5. "      R_RD_REQ              ,R_RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "   R_TX_EMPTY          ,R_TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "    R_TX_OVER            ,R_TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " R_RX_FULL                 ,R_RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      R_RX_OVER             ,R_RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   R_RX_UNDER          ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x30++0x03
line.long 0x00 "INTR_MASK,I2C Interrupt Mask Register"
bitfld.long 0x00 13. " M_MASTER_ON_HOLD          ,MASTER_ON_HOLD interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 12. "        M_RESTART_DET         ,RESTART_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 11. "     M_GEN_CALL          ,GEN_CALL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 10. "      M_START_DET          ,START_DET interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 9. " M_STOP_DET                ,STOP_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 8. "        M_ACTIVITY            ,ACTIVITY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 7. "     M_RX_DONE           ,RX_DONE interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 6. "      M_TX_ABRT            ,TX_ABRT interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 5. " M_RD_REQ                  ,RD_REQ interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 4. "        M_TX_EMPTY            ,TX_EMPTY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 3. "     M_TX_OVER           ,TX_OVER interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 2. " M_RX_FULL                 ,RX_FULL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 1. "        M_RX_OVER             ,RX_OVER interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 0. "     M_RX_UNDER          ,RX_UNDER interrupt mask" "Masked,Unmasked"
rgroup.long 0x34++0x03
line.long 0x00 "RAW_INTR_STAT,I2C Raw Interrupt Status Register"
bitfld.long 0x00 13. " MASTER_ON_HOLD            ,MASTER_ON_HOLD interrupt active" "Not active,Active"
bitfld.long 0x00 12. "      RESTART_DET           ,RESTART_DET interrupt active" "Not active,Active"
bitfld.long 0x00 11. "   GEN_CALL            ,GEN_CALL interrupt active" "Not active,Active"
bitfld.long 0x00 10. "    START_DET            ,START_DET interrupt active" "Not active,Active"
newline
bitfld.long 0x00 9. " STOP_DET                  ,STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "      RAW_INTR_ACTIVITY     ,RAW_INTR_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "   RX_DONE             ,RX_DONE interrupt active" "Not active,Active"
bitfld.long 0x00 6. "    TX_ABRT              ,TX_ABRT interrupt active" "Not active,Active"
newline
bitfld.long 0x00 5. " RD_REQ                    ,RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "      TX_EMPTY              ,TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "   TX_OVER             ,TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " RX_FULL                   ,RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      RX_OVER               ,RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   RX_UNDER            ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x38++0x07
line.long 0x00 "RX_TL,I2C Receive FIFO Threshold Register"
hexmask.long.byte 0x00 0.--7. 1. " RX_TL                     ,Receive FIFO threshold level"
line.long 0x04 "TX_TL,I2C Transmit FIFO Threshold Register"
hexmask.long.byte 0x04 0.--7. 1. " TX_TL                     ,Transmit FIFO threshold level"
newline
hgroup.long 0x40++0x03
hide.long 0x00 "CLR_INTR,Clear Combined and Individual Interrupt Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "CLR_RX_UNDER,Clear RX_UNDER Interrupt Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "CLR_RX_OVER,Clear RX_OVER Interrupt Register"
in
hgroup.long 0x4C++0x03
hide.long 0x00 "CLR_TX_OVER,Clear TX_OVER Interrupt Register"
in
hgroup.long 0x50++0x03
hide.long 0x00 "CLR_RD_REQ,Clear RD_REQ Interrupt Register"
in
hgroup.long 0x54++0x03
hide.long 0x00 "CLR_TX_ABRT,Clear TX_ABRT Interrupt Register"
in
hgroup.long 0x58++0x03
hide.long 0x00 "CLR_RX_DONE,Clear RX_DONE Interrupt Register"
in
hgroup.long 0x5C++0x03
hide.long 0x00 "CLR_ACTIVITY,Clear ACTIVITY Interrupt Register"
in
hgroup.long 0x60++0x03
hide.long 0x00 "CLR_STOP_DET,Clear STOP_DET Interrupt Register"
in
hgroup.long 0x64++0x03
hide.long 0x00 "CLR_START_DET,Clear START_DET Interrupt Register"
in
hgroup.long 0x68++0x03
hide.long 0x00 "CLR_GEN_CALL,Clear GEN_CALL Interrupt Register"
in
newline
group.long 0x6C++0x03
line.long 0x00 "IC_ENABLE,I2C Enable Register"
bitfld.long 0x00 2. " TX_CMD_BLOCK            ,Tx command execution block" "Not blocked,Blocked"
bitfld.long 0x00 1. "    ABORT              ,ABORT operation in progress" "Not in progress,In progress"
bitfld.long 0x00 0. "  ENABLE             ,I2C enable" "Disabled,Enabled"
rgroup.long 0x70++0x0B
line.long 0x00 "IC_STATUS,I2C Status Register"
bitfld.long 0x00 6. " SLV_ACTIVITY            ,Slave FSM activity status" "Idle,Active"
bitfld.long 0x00 5. "         MST_ACTIVITY       ,Master FSM activity status" "Idle,Active"
bitfld.long 0x00 4. "           RFF                ,Receive FIFO completely full" "Not full,Full"
newline
bitfld.long 0x00 3. " RFNE                    ,Receive FIFO not empty" "No,Yes"
bitfld.long 0x00 2. "            TFE                ,Transmit FIFO completely empty" "Not empty,Empty"
newline
bitfld.long 0x00 1. " TFNF                    ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x00 0. "            IC_STATUS_ACTIVITY ,I2C activity status" "Idle,Active"
line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register"
hexmask.long.byte 0x04 0.--6. 1. " TXFLR                   ,Transmit FIFO level"
line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register"
hexmask.long.byte 0x08 0.--6. 1. " RXFLR                   ,Receive FIFO level"
group.long 0x7C++0x03
line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Time Length Register"
hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD          ,Required SDA Rx hold time"
hexmask.long.word 0x00 0.--15. 1. "             IC_SDA_TX_HOLD     ,Required SDA Tx hold time"
if (((per.l(ad:0xFFC02B00))&0x01)==0x01)
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 16. "           ABRT_USER_ABRT     ,Transfer abort detected by master" "Not detected,Detected"
bitfld.long 0x00 15. "     ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "  ABRT_SLV_ARBLOST    ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
else
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 15. "           ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "     ABRT_SLV_ARBLOST   ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
endif
group.long 0x84++0x17
line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register"
bitfld.long 0x00 0. " NACK                    ,Generate NACK" "Not generated,Generated"
line.long 0x04 "IC_DMA_CR,DMA Control Register"
bitfld.long 0x04 1. " TDMAE                   ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x04 0. "       RDMAE              ,Receive DMA enable" "Disabled,Enabled"
line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register"
bitfld.long 0x08 0.--5. " DMATDL                  ,Transmit data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x0C "IC_DMA_RDLR,DMA Receive Data Level Register"
bitfld.long 0x0C 0.--5. " DMARDL                  ,Receive data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register"
hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP               ,SDA setup"
line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register"
bitfld.long 0x14 0. " ACK_GEN_CALL            ,ACK general call generate" "Not generated,Generated"
rgroup.long 0x9C++0x03
line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register"
bitfld.long 0x00 2. " SLV_RX_DATA_LOST        ,Slave received data lost" "Not lost,Lost"
newline
bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave disabled while busy" "No,Yes"
bitfld.long 0x00 0. "            IC_EN              ,IC_EN status" "Disabled,Enabled"
if (((per.l(ad:0xFFC02B00+0x6C))&0x01)==0x00)
group.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
else
rgroup.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
endif
newline
hgroup.long 0xA8++0x03
hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register"
in
newline
rgroup.long 0xF4++0x0B
line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1"
hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,IC_TX_BUFFER_DEPTH coreConsultant parameter"
hexmask.long.byte 0x00 8.--15. 1. "          RX_BUFFER_DEPTH ,IC_RX_BUFFER_DEPTH coreConsultant parameter"
bitfld.long 0x00 7. "        ADD_ENCODED_PARAMS ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 6. "  HAS_DMA        ,DMA handshaking signals status" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " INTR_IO         ,Interrupt outputs" "Individual,Combined"
bitfld.long 0x00 4. "  HC_COUNT_VALUES ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "  MAX_SPEED_MODE     ,IC max speed mode" ",Standard,Fast,High"
bitfld.long 0x00 0.--1. "  APB_DATA_WIDTH ,APB data bus width" "8 bits,16 bits,32 bits,?..."
line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register"
line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register"
width 0x0B
tree.end
tree "I2C_EMAC_2"
base ad:0xFFC02C00
width 23.
group.long 0x00++0x0B
line.long 0x00 "CON,I2C Control Register"
rbitfld.long 0x00 10. " STOP_DET_IF_MASTER_ACTIVE ,Stop detection if active only enable" "Disabled,Enabled"
rbitfld.long 0x00 9. "        RX_FIFO_FULL_HLD_CTRL ,Bus control when Rx FIFO is full" "Overflow,Hold"
bitfld.long 0x00 8. "     TX_EMPTY_CTRL       ,Generation of the TX_EMPTY interrupt control" "Default,Controlled"
bitfld.long 0x00 7. "    STOP_DET_IFADDRESSED ,Stop detection only if addressed enable" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " IC_SLAVE_DISABLE          ,Slave disable" "No,Yes"
bitfld.long 0x00 5. "             IC_RESTART_EN         ,I2C restart enable" "Disabled,Enabled"
rbitfld.long 0x00 4. "     IC_10BITADDR_MASTER ,Master addressing mode" "7-bit,10-bit"
newline
bitfld.long 0x00 3. " IC_10BITADDR_SLAVE        ,Slave addressing mode" "7-bit,10-bit"
bitfld.long 0x00 1.--2. "          SPEED                 ,Speed at which the DW_apb_i2c operates" ",Standard,Fast,High"
bitfld.long 0x00 0. "     MASTER_MODE         ,Master mode enable" "Disabled,Enabled"
line.long 0x04 "TAR,I2C Target Address Register"
bitfld.long 0x04 12. " IC_10BITADDR_MASTER       ,Address transmission format" "7-bit,10-bit"
bitfld.long 0x04 11. "          SPECIAL               ,Programming of GENERAL_CALL or START_BYTE transmission enable" "Disabled,Enabled"
bitfld.long 0x04 10. "     GC_OR_START         ,Byte transmission select" "GENRAL_CALL,START"
hexmask.long.word 0x04 0.--9. 0x01 "   IC_TAR               ,Target address for any master transaction"
line.long 0x08 "SAR,I2C Slave Address Register"
hexmask.long.word 0x08 0.--9. 0x01 " IC_SAR                    ,Target address for slave operations"
group.long 0x10++0x03
line.long 0x00 "DATA_CMD,I2C Rx/Tx Data Buffer and Command Register"
rbitfld.long 0x00 11. " FIRST_DATA_BYTE           ,The first data byte received" "Sequential,Non sequential"
bitfld.long 0x00 10. "  RESTART               ,Restart before this command issue" "Don't issue,Issue"
bitfld.long 0x00 9. "  STOP                ,Stop after this command issue" "Don't issue,Issue"
newline
bitfld.long 0x00 8. " CMD                       ,Master command type select" "Write,Read"
hexmask.long.byte 0x00 0.--7. 1. "           DAT                   ,Data to be transmitted or received on the I2C bus"
group.long 0x14++0x07
line.long 0x00 "SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_SS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_LCNT            ,SCL clock low period count"
group.long 0x18++0x07
line.long 0x00 "FS_SCL_HCNT,Fast Mode I2C Clock SCL High Count Register"
hexmask.long.word 0x00 0.--15. 1. " IC_FS_SCL_HCNT            ,SCL clock high period count"
line.long 0x04 "FS_SCL_LCNT,Fast Mode I2C Clock SCL Low Count Register"
hexmask.long.word 0x04 0.--15. 1. " IC_FS_SCL_LCNT            ,SCL clock low period count"
rgroup.long 0x2C++0x03
line.long 0x00 "INTR_STAT,I2C Interrupt Status Register"
bitfld.long 0x00 14. " RSVD_R_SCL_STUCK_AT_LOW   ,SCL line stuck at low interrupt active" "Not active,Active"
bitfld.long 0x00 13. "      R_MASTER_ON_HOLD      ,Master is holding the bus and TX FIFO is empty interrupt active" "Not active,Active"
bitfld.long 0x00 12. "   R_RESTART_DET       ,Restart condition has occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 11. "  R_GEN_CALL           ,General call address interrupt active" "Not active,Active"
newline
bitfld.long 0x00 10. " R_START_DET               ,Start or restart condition occurred on the I2C" "Not occurred,Occurred"
bitfld.long 0x00 9. "    R_STOP_DET            ,R_STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "   R_ACTIVITY          ,R_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "    R_RX_DONE            ,R_RX_DONE interrupt active" "Not active,Active"
newline
bitfld.long 0x00 6. " R_TX_ABRT                 ,R_TX_ABRT interrupt active" "Not active,Active"
bitfld.long 0x00 5. "      R_RD_REQ              ,R_RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "   R_TX_EMPTY          ,R_TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "    R_TX_OVER            ,R_TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " R_RX_FULL                 ,R_RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      R_RX_OVER             ,R_RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   R_RX_UNDER          ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x30++0x03
line.long 0x00 "INTR_MASK,I2C Interrupt Mask Register"
bitfld.long 0x00 13. " M_MASTER_ON_HOLD          ,MASTER_ON_HOLD interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 12. "        M_RESTART_DET         ,RESTART_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 11. "     M_GEN_CALL          ,GEN_CALL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 10. "      M_START_DET          ,START_DET interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 9. " M_STOP_DET                ,STOP_DET interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 8. "        M_ACTIVITY            ,ACTIVITY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 7. "     M_RX_DONE           ,RX_DONE interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 6. "      M_TX_ABRT            ,TX_ABRT interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 5. " M_RD_REQ                  ,RD_REQ interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 4. "        M_TX_EMPTY            ,TX_EMPTY interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 3. "     M_TX_OVER           ,TX_OVER interrupt mask" "Masked,Unmasked"
newline
bitfld.long 0x00 2. " M_RX_FULL                 ,RX_FULL interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 1. "        M_RX_OVER             ,RX_OVER interrupt mask" "Masked,Unmasked"
bitfld.long 0x00 0. "     M_RX_UNDER          ,RX_UNDER interrupt mask" "Masked,Unmasked"
rgroup.long 0x34++0x03
line.long 0x00 "RAW_INTR_STAT,I2C Raw Interrupt Status Register"
bitfld.long 0x00 13. " MASTER_ON_HOLD            ,MASTER_ON_HOLD interrupt active" "Not active,Active"
bitfld.long 0x00 12. "      RESTART_DET           ,RESTART_DET interrupt active" "Not active,Active"
bitfld.long 0x00 11. "   GEN_CALL            ,GEN_CALL interrupt active" "Not active,Active"
bitfld.long 0x00 10. "    START_DET            ,START_DET interrupt active" "Not active,Active"
newline
bitfld.long 0x00 9. " STOP_DET                  ,STOP_DET interrupt active" "Not active,Active"
bitfld.long 0x00 8. "      RAW_INTR_ACTIVITY     ,RAW_INTR_ACTIVITY interrupt active" "Not active,Active"
bitfld.long 0x00 7. "   RX_DONE             ,RX_DONE interrupt active" "Not active,Active"
bitfld.long 0x00 6. "    TX_ABRT              ,TX_ABRT interrupt active" "Not active,Active"
newline
bitfld.long 0x00 5. " RD_REQ                    ,RD_REQ interrupt active" "Not active,Active"
bitfld.long 0x00 4. "      TX_EMPTY              ,TX_EMPTY interrupt active" "Not active,Active"
bitfld.long 0x00 3. "   TX_OVER             ,TX_OVER interrupt active" "Not active,Active"
newline
bitfld.long 0x00 2. " RX_FULL                   ,RX_FULL interrupt active" "Not active,Active"
bitfld.long 0x00 1. "      RX_OVER               ,RX_OVER interrupt active" "Not active,Active"
bitfld.long 0x00 0. "   RX_UNDER            ,RX_UNDER interrupt active" "Not active,Active"
group.long 0x38++0x07
line.long 0x00 "RX_TL,I2C Receive FIFO Threshold Register"
hexmask.long.byte 0x00 0.--7. 1. " RX_TL                     ,Receive FIFO threshold level"
line.long 0x04 "TX_TL,I2C Transmit FIFO Threshold Register"
hexmask.long.byte 0x04 0.--7. 1. " TX_TL                     ,Transmit FIFO threshold level"
newline
hgroup.long 0x40++0x03
hide.long 0x00 "CLR_INTR,Clear Combined and Individual Interrupt Register"
in
hgroup.long 0x44++0x03
hide.long 0x00 "CLR_RX_UNDER,Clear RX_UNDER Interrupt Register"
in
hgroup.long 0x48++0x03
hide.long 0x00 "CLR_RX_OVER,Clear RX_OVER Interrupt Register"
in
hgroup.long 0x4C++0x03
hide.long 0x00 "CLR_TX_OVER,Clear TX_OVER Interrupt Register"
in
hgroup.long 0x50++0x03
hide.long 0x00 "CLR_RD_REQ,Clear RD_REQ Interrupt Register"
in
hgroup.long 0x54++0x03
hide.long 0x00 "CLR_TX_ABRT,Clear TX_ABRT Interrupt Register"
in
hgroup.long 0x58++0x03
hide.long 0x00 "CLR_RX_DONE,Clear RX_DONE Interrupt Register"
in
hgroup.long 0x5C++0x03
hide.long 0x00 "CLR_ACTIVITY,Clear ACTIVITY Interrupt Register"
in
hgroup.long 0x60++0x03
hide.long 0x00 "CLR_STOP_DET,Clear STOP_DET Interrupt Register"
in
hgroup.long 0x64++0x03
hide.long 0x00 "CLR_START_DET,Clear START_DET Interrupt Register"
in
hgroup.long 0x68++0x03
hide.long 0x00 "CLR_GEN_CALL,Clear GEN_CALL Interrupt Register"
in
newline
group.long 0x6C++0x03
line.long 0x00 "IC_ENABLE,I2C Enable Register"
bitfld.long 0x00 2. " TX_CMD_BLOCK            ,Tx command execution block" "Not blocked,Blocked"
bitfld.long 0x00 1. "    ABORT              ,ABORT operation in progress" "Not in progress,In progress"
bitfld.long 0x00 0. "  ENABLE             ,I2C enable" "Disabled,Enabled"
rgroup.long 0x70++0x0B
line.long 0x00 "IC_STATUS,I2C Status Register"
bitfld.long 0x00 6. " SLV_ACTIVITY            ,Slave FSM activity status" "Idle,Active"
bitfld.long 0x00 5. "         MST_ACTIVITY       ,Master FSM activity status" "Idle,Active"
bitfld.long 0x00 4. "           RFF                ,Receive FIFO completely full" "Not full,Full"
newline
bitfld.long 0x00 3. " RFNE                    ,Receive FIFO not empty" "No,Yes"
bitfld.long 0x00 2. "            TFE                ,Transmit FIFO completely empty" "Not empty,Empty"
newline
bitfld.long 0x00 1. " TFNF                    ,Transmit FIFO not full" "No,Yes"
bitfld.long 0x00 0. "            IC_STATUS_ACTIVITY ,I2C activity status" "Idle,Active"
line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register"
hexmask.long.byte 0x04 0.--6. 1. " TXFLR                   ,Transmit FIFO level"
line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register"
hexmask.long.byte 0x08 0.--6. 1. " RXFLR                   ,Receive FIFO level"
group.long 0x7C++0x03
line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Time Length Register"
hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD          ,Required SDA Rx hold time"
hexmask.long.word 0x00 0.--15. 1. "             IC_SDA_TX_HOLD     ,Required SDA Tx hold time"
if (((per.l(ad:0xFFC02C00))&0x01)==0x01)
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 16. "           ABRT_USER_ABRT     ,Transfer abort detected by master" "Not detected,Detected"
bitfld.long 0x00 15. "     ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "  ABRT_SLV_ARBLOST    ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
else
rgroup.long 0x80++0x03
line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register"
hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT            ,Number of Tx FIFO data commands which are flushed due to TX_ABRT interrupt"
bitfld.long 0x00 15. "           ABRT_SLVRD_INTX    ,Slave trying to transmit to remote master in read mode scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 14. "     ABRT_SLV_ARBLOST   ,Slave lost arbitration to remote master" "Not lost,Lost"
newline
bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO    ,Slave flushes existing data in TX-FIFO upon getting read command" "Not flushed,Flushed"
bitfld.long 0x00 12. "    ARB_LOST           ,Master arbitration lost" "Not lost,Lost"
bitfld.long 0x00 11. "         ARB_MASTER_DIS     ,User initiating master operation when MASTER disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 10. "  ABRT_10B_RD_NORSTRT ,Master trying to read in 10Bit addressing mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT      ,User trying to send START byte when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 8. "   ABRT_HS_NORSTRT    ,User trying to switch Master to HS mode when RESTART disabled scenario occurred" "Not occurred,Occurred"
bitfld.long 0x00 7. "     ABRT_SBYTE_ACKDET  ,ACK detected for START byte" "Not detected,Detected"
bitfld.long 0x00 6. "  ABRT_HS_ACKDET      ,HS master code ACKed in HS mode scenario occurred" "Not occurred,Occurred"
newline
bitfld.long 0x00 5. " ABRT_GCALL_READ         ,GCALL follow by read from bus" "Not followed,Followed"
bitfld.long 0x00 4. "   ABRT_GCALL_NOACK   ,GCALL not ACKed by any slave" "No,Yes"
bitfld.long 0x00 3. "              ABRT_TXDATA_NOACK  ,Transmitted data not ACKed by addressed slave" "No,Yes"
newline
bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK      ,Byte 2 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 1. "            ABRT_10ADDR1_NOACK ,Byte 1 of 10Bit Address not ACKed by any slave" "No,Yes"
bitfld.long 0x00 0. "              ABRT_7B_ADDR_NOACK ,No ACK for 7-bit address" "No,Yes"
endif
group.long 0x84++0x17
line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register"
bitfld.long 0x00 0. " NACK                    ,Generate NACK" "Not generated,Generated"
line.long 0x04 "IC_DMA_CR,DMA Control Register"
bitfld.long 0x04 1. " TDMAE                   ,Transmit DMA enable" "Disabled,Enabled"
bitfld.long 0x04 0. "       RDMAE              ,Receive DMA enable" "Disabled,Enabled"
line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register"
bitfld.long 0x08 0.--5. " DMATDL                  ,Transmit data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x0C "IC_DMA_RDLR,DMA Receive Data Level Register"
bitfld.long 0x0C 0.--5. " DMARDL                  ,Receive data level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register"
hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP               ,SDA setup"
line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register"
bitfld.long 0x14 0. " ACK_GEN_CALL            ,ACK general call generate" "Not generated,Generated"
rgroup.long 0x9C++0x03
line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register"
bitfld.long 0x00 2. " SLV_RX_DATA_LOST        ,Slave received data lost" "Not lost,Lost"
newline
bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave disabled while busy" "No,Yes"
bitfld.long 0x00 0. "            IC_EN              ,IC_EN status" "Disabled,Enabled"
if (((per.l(ad:0xFFC02C00+0x6C))&0x01)==0x00)
group.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
else
rgroup.long 0xA0++0x03
line.long 0x00 "IC_FS_SPKLEN,I2C SS / FS / FM+ Spike Suppression Limit"
hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN            ,Duration of the longest spike in the SCL or SDA lines"
endif
newline
hgroup.long 0xA8++0x03
hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register"
in
newline
rgroup.long 0xF4++0x0B
line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1"
hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,IC_TX_BUFFER_DEPTH coreConsultant parameter"
hexmask.long.byte 0x00 8.--15. 1. "          RX_BUFFER_DEPTH ,IC_RX_BUFFER_DEPTH coreConsultant parameter"
bitfld.long 0x00 7. "        ADD_ENCODED_PARAMS ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 6. "  HAS_DMA        ,DMA handshaking signals status" "Disabled,Enabled"
newline
bitfld.long 0x00 5. " INTR_IO         ,Interrupt outputs" "Individual,Combined"
bitfld.long 0x00 4. "  HC_COUNT_VALUES ,Capability of reading encoded parameters status" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "  MAX_SPEED_MODE     ,IC max speed mode" ",Standard,Fast,High"
bitfld.long 0x00 0.--1. "  APB_DATA_WIDTH ,APB data bus width" "8 bits,16 bits,32 bits,?..."
line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register"
line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register"
width 0x0B
tree.end
tree.end
tree "UART (Universal Asynchronous Receiver-Transmitter)"
base ad:0xFFC02000
width 13.
group.long 0x00++0x07
line.long 0x00 "RBR_THR_DLL,RX Buffer/TX Holding/Divisor Latch Low"
hexmask.long.byte 0x00 0.--7. 1. " VALUE        ,Multi function data bits"
line.long 0x04 "IER_DLH,Interrupt Enable And Divisor Latch High"
bitfld.long 0x04 7. " PTIME_DLH7   ,This is used to enable/disable the generation of THRE interrupt" "Disabled,Enabled"
bitfld.long 0x04 6. "               DLH6        ,Bit 6 of DLH value" "0,1"
bitfld.long 0x04 5. "                      DLH5                   ,Bit 5 of DLH value" "0,1"
bitfld.long 0x04 4. "            DLH5         ,Bit 4 of DLH value" "0,1"
newline
bitfld.long 0x04 3. " EDSSI_DHL3   ,This is used to enable/disable the generation of Modem Status Interrupts" "Disabled,Enabled"
bitfld.long 0x04 2. "               ELSI_DHL2   ,This is used to enable/disable the generation of Receiver Line Status Interrupt" "Disabled,Enabled"
bitfld.long 0x04 1. "               ETBEI_DLHL             ,Enable transmit holding register empty interrupt" "Disabled,Enabled"
bitfld.long 0x04 0. "     ERBFI_DLH0   ,Used to enable/disable the generation of the receive data available interrupt and the character timeout interrupt" "Disabled,Enabled"
rgroup.long 0x08++0x03
line.long 0x00 "IIR,Interrupt Identification Register"
bitfld.long 0x00 6.--7. " FIFOEN       ,FIFO Enabled" "Disabled,,,Enabled"
bitfld.long 0x00 0.--3. "               ID          ,Interrupt ID" "Modem status,No Interrupt pending,THR empty,,Receive data available,,Receive line status,Busy detect,,,,,Character timeout,?..."
wgroup.long 0x08++0x03
line.long 0x00 "FCR,FIFO Control Register"
bitfld.long 0x00 6.--7. " RT           ,RCVR trigger" "1 character in FIFO,FIFO 1/4 full,FIFO 1/2 full,FIFO 2 less than full"
bitfld.long 0x00 4.--5. "  TET         ,TX empty trigger" "1 character in FIFO,FIFO 1/4 full,FIFO 1/2 full,FIFO 2 less than full"
bitfld.long 0x00 3. "  DMAM                   ,DMA mode" "Mode 0,Mode 1"
bitfld.long 0x00 2. "       XFIFOR       ,XMIT FIFO Reset" ",Transmit FIFO reset"
newline
bitfld.long 0x00 1. " RFIFOR       ,RCVR FIFO Reset" ",Receive FIFO reset"
bitfld.long 0x00 0. "     FIFOE       ,FIFO Enable" "Disable,Enable"
group.long 0x0C++0x07
line.long 0x00 "LCR,Line Control Register"
bitfld.long 0x00 7. " DLAB         ,Divisor latch access bit" "0,1"
bitfld.long 0x00 6. "                      BREAK       ,Break control bit" "0,1"
bitfld.long 0x00 5. "                      SP                     ,Stick parity enable" "Disabled,Enabled"
bitfld.long 0x00 4. "     EPS          ,Even parity select" "Odd,Even"
newline
bitfld.long 0x00 3. " PEN          ,Parity enable" "Disabled,Enabled"
bitfld.long 0x00 2. "               STOP        ,Number of stop bits" "1,1.5"
bitfld.long 0x00 0.--1. "                    DLS                    ,Data length select" "5bits,6bits,7bits,8bits"
line.long 0x04 "MCR,Modem control register"
bitfld.long 0x04 6. " SIRE         ,SIR mode enable" "Disabled,Enabled"
bitfld.long 0x04 5. "               AFCE        ,Auto flow control enable" "Disabled,Enabled"
bitfld.long 0x04 4. "               LOOPBACK               ,LoopBack bit" "0,1"
bitfld.long 0x04 3. "            OUT2         ,This is used to directly control the user-designated Output2 (out2_n) output" "De-asserted,Asserted"
newline
bitfld.long 0x04 2. " OUT1         ,This is used to directly control the user-designated Output1 (out1_n) output" "De-asserted,Asserted"
bitfld.long 0x04 1. "            RTS         ,This is used to directly control the Request to Send (rts_n) output" "De-asserted,Asserted"
bitfld.long 0x04 0. "            DTR                    ,This is used to directly control the Data Terminal Ready (dtr_n) output" "De-asserted,Asserted"
group.long 0x1C++0x03
line.long 0x00 "SCR,Scratchpad Register"
hexmask.long.byte 0x00 0.--7. 1. " SCR          ,This register is for programmers to use as a temporary storage space"
tree "SRBR/STHR Registers"
group.long 0x30++0x03
line.long 0x00 "SRBR_STHR_0,Shadow Register For Receive Buffer Register 0 And Transmit Holding Register 0"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_0 ,Shadow register for RBR 0 and THR 0 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x34++0x03
line.long 0x00 "SRBR_STHR_1,Shadow Register For Receive Buffer Register 1 And Transmit Holding Register 1"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_1 ,Shadow register for RBR 1 and THR 1 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x38++0x03
line.long 0x00 "SRBR_STHR_2,Shadow Register For Receive Buffer Register 2 And Transmit Holding Register 2"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_2 ,Shadow register for RBR 2 and THR 2 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x3C++0x03
line.long 0x00 "SRBR_STHR_3,Shadow Register For Receive Buffer Register 3 And Transmit Holding Register 3"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_3 ,Shadow register for RBR 3 and THR 3 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x40++0x03
line.long 0x00 "SRBR_STHR_4,Shadow Register For Receive Buffer Register 4 And Transmit Holding Register 4"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_4 ,Shadow register for RBR 4 and THR 4 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x44++0x03
line.long 0x00 "SRBR_STHR_5,Shadow Register For Receive Buffer Register 5 And Transmit Holding Register 5"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_5 ,Shadow register for RBR 5 and THR 5 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x48++0x03
line.long 0x00 "SRBR_STHR_6,Shadow Register For Receive Buffer Register 6 And Transmit Holding Register 6"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_6 ,Shadow register for RBR 6 and THR 6 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x4C++0x03
line.long 0x00 "SRBR_STHR_7,Shadow Register For Receive Buffer Register 7 And Transmit Holding Register 7"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_7 ,Shadow register for RBR 7 and THR 7 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x50++0x03
line.long 0x00 "SRBR_STHR_8,Shadow Register For Receive Buffer Register 8 And Transmit Holding Register 8"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_8 ,Shadow register for RBR 8 and THR 8 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x54++0x03
line.long 0x00 "SRBR_STHR_9,Shadow Register For Receive Buffer Register 9 And Transmit Holding Register 9"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_9 ,Shadow register for RBR 9 and THR 9 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x58++0x03
line.long 0x00 "SRBR_STHR_10,Shadow Register For Receive Buffer Register 10 And Transmit Holding Register 10"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_10 ,Shadow register for RBR 10 and THR 10 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x5C++0x03
line.long 0x00 "SRBR_STHR_11,Shadow Register For Receive Buffer Register 11 And Transmit Holding Register 11"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_11 ,Shadow register for RBR 11 and THR 11 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x60++0x03
line.long 0x00 "SRBR_STHR_12,Shadow Register For Receive Buffer Register 12 And Transmit Holding Register 12"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_12 ,Shadow register for RBR 12 and THR 12 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x64++0x03
line.long 0x00 "SRBR_STHR_13,Shadow Register For Receive Buffer Register 13 And Transmit Holding Register 13"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_13 ,Shadow register for RBR 13 and THR 13 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x68++0x03
line.long 0x00 "SRBR_STHR_14,Shadow Register For Receive Buffer Register 14 And Transmit Holding Register 14"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_14 ,Shadow register for RBR 14 and THR 14 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
group.long 0x6C++0x03
line.long 0x00 "SRBR_STHR_15,Shadow Register For Receive Buffer Register 15 And Transmit Holding Register 15"
hexmask.long.byte 0x00 0.--7. 1. " SRBR_STHR_15 ,Shadow register for RBR 15 and THR 15 and has been allocated sixteen 32-bit locations so as to accommodate burst accesses from the master"
tree.end
newline
group.long 0x70++0x03
line.long 0x00 "FAR,FIFO Access Register"
bitfld.long 0x00 0. " SRBR_STHR    ,FIFO access mode enable" "Disabled,Enabled"
rgroup.long 0x74++0x03
line.long 0x00 "TFR,Transmit FIFO Read"
hexmask.long.byte 0x00 0.--7. 1. " TFR          ,Transmit FIFO Read"
wgroup.long 0x78++0x03
line.long 0x00 "RFW,Receive FIFO Write"
bitfld.long 0x00 9. " RFFE         ,Receive FIFO Framing Error" "No error,Error"
bitfld.long 0x00 8. "               RFPE        ,Receive FIFO Parity Error" "No error,Error"
hexmask.long.byte 0x00 0.--7. 1. "               RFWD                   ,Receive FIFO Write Data"
rgroup.long 0x7C++0x0B
line.long 0x00 "USR,UART Status Register"
bitfld.long 0x00 4. " RFF          ,Receive FIFO full" "Not full,Full"
bitfld.long 0x00 3. "               RFNE        ,Receive FIFO not empty" "Not empty,Empty"
bitfld.long 0x00 2. "              TFE                    ,Transmit FIFO empty" "Not empty,Empty"
bitfld.long 0x00 1. "    TFNF         ,Transmit FIFO not full" "Full,Not full"
newline
bitfld.long 0x00 0. " RSVD_BUSY    ,UART Busy" "Not busy,Busy"
line.long 0x04 "TFL,Transmit FIFO Level Register"
hexmask.long.byte 0x04 0.--7. 1. " TFL          ,Transmit FIFO level"
line.long 0x08 "RFL,Receive FIFO Level"
hexmask.long.byte 0x08 0.--7. 1. " RFL          ,Receive FIFO level"
wgroup.long 0x88++0x03
line.long 0x00 "SRR,Software Reset Register"
bitfld.long 0x00 2. " XFR          ,XMIT FIFO reset" "No reset,Reset"
bitfld.long 0x00 1. "               RFR         ,RCVR FIFO reset" "No reset,Reset"
bitfld.long 0x00 0. "               UR                     ,UART reset" "No reset,Reset"
group.long 0x8C++0x1B
line.long 0x00 "SRTS,Shadow Request to Send"
bitfld.long 0x00 0. " SRTS         ,Shadow request to send" "Uart_rts_n logic1,Uart_rts_n logic0"
line.long 0x04 "SBCR,Shadow Break Control Register"
bitfld.long 0x04 0. " SBCR         ,Shadow break control bit" "No break,Break"
line.long 0x08 "SDMAM,Shadow DMA Mode"
bitfld.long 0x08 0. " SDMAM        ,Shadow DMA mode" "Single DMA,Multiple DMA"
line.long 0x0C "SFE,Shadow FIFO Enable"
bitfld.long 0x0C 0. " SFE          ,Shadow FIFO enable" "Disabled,Enabled"
line.long 0x10 "SRT,Shadow RCVR Trigger"
bitfld.long 0x10 0.--1. " SRT          ,Shadow RCVR trigger" "1 character in FIFO,FIFO 1/4 full,FIFO 1/2 full,FIFO 2 less than full"
line.long 0x14 "STET,Shadow TX Empty Trigger"
bitfld.long 0x14 0.--1. " STET         ,Shadow TX empty trigger" "FIFO empty,2 characters in FIFO,FIFO 1/4 full,FIFO 1/2 full"
line.long 0x18 "HTX,Halt TX"
bitfld.long 0x18 0. " HTX          ,Halt TX" "Disabled,Enabled"
wgroup.long 0xA8++0x03
line.long 0x00 "DMASA,DMA Software Acknowledge"
bitfld.long 0x00 0. " DMASA        ,DMA software acknowledge" "0,1"
rgroup.long 0xF4++0x0B
line.long 0x00 "CPR,Component Parameter Register"
hexmask.long.byte 0x00 16.--23. 1. " FIFO_MODE    ,Encoding of FIFO_MODE configuration parameter value.DW_apb_uart.ralf"
bitfld.long 0x00 13. "                     DMA_EXTRA   ,Encoding of DMA_EXTRA configuration parameter value" "False,True"
bitfld.long 0x00 12. "                  UART_ADD_ENCODED_PARAM ,Encoding of UART_ADD_ENCODED_PARAMS configuration parameter value" "False,True"
bitfld.long 0x00 11. "        SHADOW       ,Encoding of SHADOW configuration parameter value" "False,True"
newline
bitfld.long 0x00 10. " FIFO_STAT    ,Encoding of FIFO_ACCESS configuration parameter value" "False,True"
bitfld.long 0x00 9. "                  FIFO_ACCESS ,Encoding of FIFO_ACCESS configuration parameter value" "False,True"
bitfld.long 0x00 8. "                  ADDITIONAL_FEAT        ,Encoding of ADDITIONAL_FEATURES configuration parameter value" "False,True"
bitfld.long 0x00 7. "        SIR_LP_MODE  ,Encoding of SIR_LP_MODE configuration parameter value" "False,True"
newline
bitfld.long 0x00 6. " SIR_MODE     ,Encoding of SIR_MODE configuration parameter value" "False,True"
bitfld.long 0x00 5. "                  THRE_MODE   ,Encoding of THRE_MODE configuration parameter value" "False,True"
bitfld.long 0x00 4. "                  AFCE_MODE              ,Encoding of AFCE_MODE configuration parameter value" "False,True"
bitfld.long 0x00 0.--1. "        APBDATAWIDTH ,Encoding of APB_DATA_WIDTH configuration parameter value" "8bits,16bits,32bits,?..."
line.long 0x04 "UCV,Component Version"
line.long 0x08 "CTR,Component Type Register"
width 0x0B
tree.end
tree.open "GPIO (General-Purpose I/O Interface)"
tree "GPIO 0"
base ad:0xFFC03200
width 15.
group.long 0x00++0x07
line.long 0x00 "SWPORTA_DR,Port A Data Register"
bitfld.long 0x00 23. " SWPORTA_DR[23]         ,Output on the I/O signal for Port A pin 23" "0,1"
bitfld.long 0x00 22. "                [22] ,Output on the I/O signal for Port A pin 22" "0,1"
bitfld.long 0x00 21. "                [21] ,Output on the I/O signal for Port A pin 21" "0,1"
bitfld.long 0x00 20. "                [20] ,Output on the I/O signal for Port A pin 20" "0,1"
newline
bitfld.long 0x00 19. " [19]                   ,Output on the I/O signal for Port A pin 19" "0,1"
bitfld.long 0x00 18. "                [18] ,Output on the I/O signal for Port A pin 18" "0,1"
bitfld.long 0x00 17. "                [17] ,Output on the I/O signal for Port A pin 17" "0,1"
bitfld.long 0x00 16. "                [16] ,Output on the I/O signal for Port A pin 16" "0,1"
newline
bitfld.long 0x00 15. " [15]                   ,Output on the I/O signal for Port A pin 15" "0,1"
bitfld.long 0x00 14. "                [14] ,Output on the I/O signal for Port A pin 14" "0,1"
bitfld.long 0x00 13. "                [13] ,Output on the I/O signal for Port A pin 13" "0,1"
bitfld.long 0x00 12. "                [12] ,Output on the I/O signal for Port A pin 12" "0,1"
newline
bitfld.long 0x00 11. " [11]                   ,Output on the I/O signal for Port A pin 11" "0,1"
bitfld.long 0x00 10. "                [10] ,Output on the I/O signal for Port A pin 10" "0,1"
bitfld.long 0x00 9. "                [9]  ,Output on the I/O signal for Port A pin 9" "0,1"
bitfld.long 0x00 8. "                [8]  ,Output on the I/O signal for Port A pin 8" "0,1"
newline
bitfld.long 0x00 7. " [7]                    ,Output on the I/O signal for Port A pin 7" "0,1"
bitfld.long 0x00 6. "                [6]  ,Output on the I/O signal for Port A pin 6" "0,1"
bitfld.long 0x00 5. "                [5]  ,Output on the I/O signal for Port A pin 5" "0,1"
bitfld.long 0x00 4. "                [4]  ,Output on the I/O signal for Port A pin 4" "0,1"
newline
bitfld.long 0x00 3. " [3]                    ,Output on the I/O signal for Port A pin 3" "0,1"
bitfld.long 0x00 2. "                [2]  ,Output on the I/O signal for Port A pin 2" "0,1"
bitfld.long 0x00 1. "                [1]  ,Output on the I/O signal for Port A pin 1" "0,1"
bitfld.long 0x00 0. "                [0]  ,Output on the I/O signal for Port A pin 0" "0,1"
line.long 0x04 "SWPORTA_DDR,Port A Data Direction Register"
bitfld.long 0x04 23. " SWPORTA_DDR[23]        ,Pin 23 data direction" "Input,Output"
bitfld.long 0x04 22. "           [22] ,Pin 22 data direction" "Input,Output"
bitfld.long 0x04 21. "           [21] ,Pin 21 data direction" "Input,Output"
bitfld.long 0x04 20. "           [20] ,Pin 20 data direction" "Input,Output"
newline
bitfld.long 0x04 19. " [19]                   ,Pin 19 data direction" "Input,Output"
bitfld.long 0x04 18. "           [18] ,Pin 18 data direction" "Input,Output"
bitfld.long 0x04 17. "           [17] ,Pin 17 data direction" "Input,Output"
bitfld.long 0x04 16. "           [16] ,Pin 16 data direction" "Input,Output"
newline
bitfld.long 0x04 15. " [15]                   ,Pin 15 data direction" "Input,Output"
bitfld.long 0x04 14. "           [14] ,Pin 14 data direction" "Input,Output"
bitfld.long 0x04 13. "           [13] ,Pin 13 data direction" "Input,Output"
bitfld.long 0x04 12. "           [12] ,Pin 12 data direction" "Input,Output"
newline
bitfld.long 0x04 11. " [11]                   ,Pin 11 data direction" "Input,Output"
bitfld.long 0x04 10. "           [10] ,Pin 10 data direction" "Input,Output"
bitfld.long 0x04 9. "           [9]  ,Pin 9 data direction" "Input,Output"
bitfld.long 0x04 8. "           [8]  ,Pin 8 data direction" "Input,Output"
newline
bitfld.long 0x04 7. " [7]                    ,Pin 7 data direction" "Input,Output"
bitfld.long 0x04 6. "           [6]  ,Pin 6 data direction" "Input,Output"
bitfld.long 0x04 5. "           [5]  ,Pin 5 data direction" "Input,Output"
bitfld.long 0x04 4. "           [4]  ,Pin 4 data direction" "Input,Output"
newline
bitfld.long 0x04 3. " [3]                    ,Pin 3 data direction" "Input,Output"
bitfld.long 0x04 2. "           [2]  ,Pin 2 data direction" "Input,Output"
bitfld.long 0x04 1. "           [1]  ,Pin 1 data direction" "Input,Output"
bitfld.long 0x04 0. "           [0]  ,Pin 0 data direction" "Input,Output"
group.long 0x30++0x0F
line.long 0x00 "INTEN,Interrupt Enable Register"
bitfld.long 0x00 23. " INTEN[23]              ,Pin 23 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 22. "         [22] ,Pin 22 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 21. "         [21] ,Pin 21 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 20. "         [20] ,Pin 20 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. " [19]                   ,Pin 19 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 18. "         [18] ,Pin 18 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 17. "         [17] ,Pin 17 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 16. "         [16] ,Pin 16 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " [15]                   ,Pin 15 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "         [14] ,Pin 14 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "         [13] ,Pin 13 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 12. "         [12] ,Pin 12 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. " [11]                   ,Pin 11 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 10. "         [10] ,Pin 10 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 9. "         [9]  ,Pin 9 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "         [8]  ,Pin 8 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. " [7]                    ,Pin 7 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 6. "         [6]  ,Pin 6 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "         [5]  ,Pin 5 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "         [4]  ,Pin 4 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " [3]                    ,Pin 3 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "         [2]  ,Pin 2 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "         [1]  ,Pin 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "         [0]  ,Pin 0 interrupt enable" "Disabled,Enabled"
line.long 0x04 "INTMASK,Interrupt Mask Register"
bitfld.long 0x04 23. " INTMASK[23]            ,Controls whether an interrupt on bit[23] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 22. "         [22] ,Controls whether an interrupt on bit[22] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 21. "         [21] ,Controls whether an interrupt on bit[21] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 20. "         [20] ,Controls whether an interrupt on bit[20] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 19. " [19]                   ,Controls whether an interrupt on bit[19] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 18. "         [18] ,Controls whether an interrupt on bit[18] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 17. "         [17] ,Controls whether an interrupt on bit[17] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 16. "         [16] ,Controls whether an interrupt on bit[16] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 15. " [15]                   ,Controls whether an interrupt on bit[15] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 14. "         [14] ,Controls whether an interrupt on bit[14] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 13. "         [13] ,Controls whether an interrupt on bit[13] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 12. "         [12] ,Controls whether an interrupt on bit[12] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 11. " [11]                   ,Controls whether an interrupt on bit[11] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 10. "         [10] ,Controls whether an interrupt on bit[10] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 9. "         [9]  ,Controls whether an interrupt on bit[9] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 8. "         [8]  ,Controls whether an interrupt on bit[8] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 7. " [7]                    ,Controls whether an interrupt on bit[7] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 6. "         [6]  ,Controls whether an interrupt on bit[6] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 5. "         [5]  ,Controls whether an interrupt on bit[5] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 4. "         [4]  ,Controls whether an interrupt on bit[4] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 3. " [3]                    ,Controls whether an interrupt on bit[3] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 2. "         [2]  ,Controls whether an interrupt on bit[2] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 1. "         [1]  ,Controls whether an interrupt on bit[1] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 0. "         [0]  ,Controls whether an interrupt on bit[0] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
line.long 0x08 "INTTYPE_LEVEL,Interrupt Level"
bitfld.long 0x08 23. " GPIO_INTTYPE_LEVEL[23] ,Interrupt type on bit[23] of Port A" "Level,Edge"
bitfld.long 0x08 22. "            [22] ,Interrupt type on bit[22] of Port A" "Level,Edge"
bitfld.long 0x08 21. "            [21] ,Interrupt type on bit[21] of Port A" "Level,Edge"
bitfld.long 0x08 20. "            [20] ,Interrupt type on bit[20] of Port A" "Level,Edge"
newline
bitfld.long 0x08 19. " [19]                   ,Interrupt type on bit[19] of Port A" "Level,Edge"
bitfld.long 0x08 18. "            [18] ,Interrupt type on bit[18] of Port A" "Level,Edge"
bitfld.long 0x08 17. "            [17] ,Interrupt type on bit[17] of Port A" "Level,Edge"
bitfld.long 0x08 16. "            [16] ,Interrupt type on bit[16] of Port A" "Level,Edge"
newline
bitfld.long 0x08 15. " [15]                   ,Interrupt type on bit[15] of Port A" "Level,Edge"
bitfld.long 0x08 14. "            [14] ,Interrupt type on bit[14] of Port A" "Level,Edge"
bitfld.long 0x08 13. "            [13] ,Interrupt type on bit[13] of Port A" "Level,Edge"
bitfld.long 0x08 12. "            [12] ,Interrupt type on bit[12] of Port A" "Level,Edge"
newline
bitfld.long 0x08 11. " [11]                   ,Interrupt type on bit[11] of Port A" "Level,Edge"
bitfld.long 0x08 10. "            [10] ,Interrupt type on bit[10] of Port A" "Level,Edge"
bitfld.long 0x08 9. "            [9]  ,Interrupt type on bit[9] of Port A" "Level,Edge"
bitfld.long 0x08 8. "            [8]  ,Interrupt type on bit[8] of Port A" "Level,Edge"
newline
bitfld.long 0x08 7. " [7]                    ,Interrupt type on bit[7] of Port A" "Level,Edge"
bitfld.long 0x08 6. "            [6]  ,Interrupt type on bit[6] of Port A" "Level,Edge"
bitfld.long 0x08 5. "            [5]  ,Interrupt type on bit[5] of Port A" "Level,Edge"
bitfld.long 0x08 4. "            [4]  ,Interrupt type on bit[4] of Port A" "Level,Edge"
newline
bitfld.long 0x08 3. " [3]                    ,Interrupt type on bit[3] of Port A" "Level,Edge"
bitfld.long 0x08 2. "            [2]  ,Interrupt type on bit[2] of Port A" "Level,Edge"
bitfld.long 0x08 1. "            [1]  ,Interrupt type on bit[1] of Port A" "Level,Edge"
bitfld.long 0x08 0. "            [0]  ,Interrupt type on bit[0] of Port A" "Level,Edge"
line.long 0x0C "INT_POLARITY,Interrupt Polarity"
bitfld.long 0x0C 23. " INT_POLARITY[23]       ,Polarity of edge or level sensitivity on bit[23] input of Port A" "Low,High"
bitfld.long 0x0C 22. "             [22] ,Polarity of edge or level sensitivity on bit[22] input of Port A" "Low,High"
bitfld.long 0x0C 21. "             [21] ,Polarity of edge or level sensitivity on bit[21] input of Port A" "Low,High"
bitfld.long 0x0C 20. "             [20] ,Polarity of edge or level sensitivity on bit[20] input of Port A" "Low,High"
newline
bitfld.long 0x0C 19. " [19]                   ,Polarity of edge or level sensitivity on bit[19] input of Port A" "Low,High"
bitfld.long 0x0C 18. "             [18] ,Polarity of edge or level sensitivity on bit[18] input of Port A" "Low,High"
bitfld.long 0x0C 17. "             [17] ,Polarity of edge or level sensitivity on bit[17] input of Port A" "Low,High"
bitfld.long 0x0C 16. "             [16] ,Polarity of edge or level sensitivity on bit[16] input of Port A" "Low,High"
newline
bitfld.long 0x0C 15. " [15]                   ,Polarity of edge or level sensitivity on bit[15] input of Port A" "Low,High"
bitfld.long 0x0C 14. "             [14] ,Polarity of edge or level sensitivity on bit[14] input of Port A" "Low,High"
bitfld.long 0x0C 13. "             [13] ,Polarity of edge or level sensitivity on bit[13] input of Port A" "Low,High"
bitfld.long 0x0C 12. "             [12] ,Polarity of edge or level sensitivity on bit[12] input of Port A" "Low,High"
newline
bitfld.long 0x0C 11. " [11]                   ,Polarity of edge or level sensitivity on bit[11] input of Port A" "Low,High"
bitfld.long 0x0C 10. "             [10] ,Polarity of edge or level sensitivity on bit[10] input of Port A" "Low,High"
bitfld.long 0x0C 9. "             [9]  ,Polarity of edge or level sensitivity on bit[9] input of Port A" "Low,High"
bitfld.long 0x0C 8. "             [8]  ,Polarity of edge or level sensitivity on bit[8] input of Port A" "Low,High"
newline
bitfld.long 0x0C 7. " [7]                    ,Polarity of edge or level sensitivity on bit[7] input of Port A" "Low,High"
bitfld.long 0x0C 6. "             [6]  ,Polarity of edge or level sensitivity on bit[6] input of Port A" "Low,High"
bitfld.long 0x0C 5. "             [5]  ,Polarity of edge or level sensitivity on bit[5] input of Port A" "Low,High"
bitfld.long 0x0C 4. "             [4]  ,Polarity of edge or level sensitivity on bit[4] input of Port A" "Low,High"
newline
bitfld.long 0x0C 3. " [3]                    ,Polarity of edge or level sensitivity on bit[3] input of Port A" "Low,High"
bitfld.long 0x0C 2. "             [2]  ,Polarity of edge or level sensitivity on bit[2] input of Port A" "Low,High"
bitfld.long 0x0C 1. "             [1]  ,Polarity of edge or level sensitivity on bit[1] input of Port A" "Low,High"
bitfld.long 0x0C 0. "             [0]  ,Polarity of edge or level sensitivity on bit[0] input of Port A" "Low,High"
rgroup.long 0x40++0x07
line.long 0x00 "INTSTATUS,Interrupt Status"
bitfld.long 0x00 23. " INTSTATUS[23]          ,Interrupt status of bit[23] in Port A" "Inactive,Active"
bitfld.long 0x00 22. "         [22] ,Interrupt status of bit[22] in Port A" "Inactive,Active"
bitfld.long 0x00 21. "         [21] ,Interrupt status of bit[21] in Port A" "Inactive,Active"
bitfld.long 0x00 20. "         [20] ,Interrupt status of bit[20] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 19. " [19]                   ,Interrupt status of bit[19] in Port A" "Inactive,Active"
bitfld.long 0x00 18. "         [18] ,Interrupt status of bit[18] in Port A" "Inactive,Active"
bitfld.long 0x00 17. "         [17] ,Interrupt status of bit[17] in Port A" "Inactive,Active"
bitfld.long 0x00 16. "         [16] ,Interrupt status of bit[16] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 15. " [15]                   ,Interrupt status of bit[15] in Port A" "Inactive,Active"
bitfld.long 0x00 14. "         [14] ,Interrupt status of bit[14] in Port A" "Inactive,Active"
bitfld.long 0x00 13. "         [13] ,Interrupt status of bit[13] in Port A" "Inactive,Active"
bitfld.long 0x00 12. "         [12] ,Interrupt status of bit[12] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 11. " [11]                   ,Interrupt status of bit[11] in Port A" "Inactive,Active"
bitfld.long 0x00 10. "         [10] ,Interrupt status of bit[10] in Port A" "Inactive,Active"
bitfld.long 0x00 9. "         [9]  ,Interrupt status of bit[9] in Port A" "Inactive,Active"
bitfld.long 0x00 8. "         [8]  ,Interrupt status of bit[8] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 7. " [7]                    ,Interrupt status of bit[7] in Port A" "Inactive,Active"
bitfld.long 0x00 6. "         [6]  ,Interrupt status of bit[6] in Port A" "Inactive,Active"
bitfld.long 0x00 5. "         [5]  ,Interrupt status of bit[5] in Port A" "Inactive,Active"
bitfld.long 0x00 4. "         [4]  ,Interrupt status of bit[4] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 3. " [3]                    ,Interrupt status of bit[3] in Port A" "Inactive,Active"
bitfld.long 0x00 2. "         [2]  ,Interrupt status of bit[2] in Port A" "Inactive,Active"
bitfld.long 0x00 1. "         [1]  ,Interrupt status of bit[1] in Port A" "Inactive,Active"
bitfld.long 0x00 0. "         [0]  ,Interrupt status of bit[0] in Port A" "Inactive,Active"
line.long 0x04 "RAW_INTSTATUS,Raw Interrupt Status"
bitfld.long 0x04 23. " RAW_INTSTATUS[23]      ,Raw interrupt of status of bit[23] Port A" "Inactive,Active"
bitfld.long 0x04 22. "         [22] ,Raw interrupt of status of bit[22] Port A" "Inactive,Active"
bitfld.long 0x04 21. "         [21] ,Raw interrupt of status of bit[21] Port A" "Inactive,Active"
bitfld.long 0x04 20. "         [20] ,Raw interrupt of status of bit[20] Port A" "Inactive,Active"
newline
bitfld.long 0x04 19. " [19]                   ,Raw interrupt of status of bit[19] Port A" "Inactive,Active"
bitfld.long 0x04 18. "         [18] ,Raw interrupt of status of bit[18] Port A" "Inactive,Active"
bitfld.long 0x04 17. "         [17] ,Raw interrupt of status of bit[17] Port A" "Inactive,Active"
bitfld.long 0x04 16. "         [16] ,Raw interrupt of status of bit[16] Port A" "Inactive,Active"
newline
bitfld.long 0x04 15. " [15]                   ,Raw interrupt of status of bit[15] Port A" "Inactive,Active"
bitfld.long 0x04 14. "         [14] ,Raw interrupt of status of bit[14] Port A" "Inactive,Active"
bitfld.long 0x04 13. "         [13] ,Raw interrupt of status of bit[13] Port A" "Inactive,Active"
bitfld.long 0x04 12. "         [12] ,Raw interrupt of status of bit[12] Port A" "Inactive,Active"
newline
bitfld.long 0x04 11. " [11]                   ,Raw interrupt of status of bit[11] Port A" "Inactive,Active"
bitfld.long 0x04 10. "         [10] ,Raw interrupt of status of bit[10] Port A" "Inactive,Active"
bitfld.long 0x04 9. "         [9]  ,Raw interrupt of status of bit[9] Port A" "Inactive,Active"
bitfld.long 0x04 8. "         [8]  ,Raw interrupt of status of bit[8] Port A" "Inactive,Active"
newline
bitfld.long 0x04 7. " [7]                    ,Raw interrupt of status of bit[7] Port A" "Inactive,Active"
bitfld.long 0x04 6. "         [6]  ,Raw interrupt of status of bit[6] Port A" "Inactive,Active"
bitfld.long 0x04 5. "         [5]  ,Raw interrupt of status of bit[5] Port A" "Inactive,Active"
bitfld.long 0x04 4. "         [4]  ,Raw interrupt of status of bit[4] Port A" "Inactive,Active"
newline
bitfld.long 0x04 3. " [3]                    ,Raw interrupt of status of bit[3] Port A" "Inactive,Active"
bitfld.long 0x04 2. "         [2]  ,Raw interrupt of status of bit[2] Port A" "Inactive,Active"
bitfld.long 0x04 1. "         [1]  ,Raw interrupt of status of bit[1] Port A" "Inactive,Active"
bitfld.long 0x04 0. "         [0]  ,Raw interrupt of status of bit[0] Port A" "Inactive,Active"
group.long 0x48++0x03
line.long 0x00 "DEBOUNCE,Debounce Enable"
bitfld.long 0x00 23. " DEBOUNCE[23]           ,External signal debounce of bit[23] enable" "No debounce,Enable debounce"
bitfld.long 0x00 22. "  [22] ,External signal debounce of bit[22] enable" "No debounce,Enable debounce"
bitfld.long 0x00 21. "  [21] ,External signal debounce of bit[21] enable" "No debounce,Enable debounce"
bitfld.long 0x00 20. "  [20] ,External signal debounce of bit[20] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 19. " [19]                   ,External signal debounce of bit[19] enable" "No debounce,Enable debounce"
bitfld.long 0x00 18. "  [18] ,External signal debounce of bit[18] enable" "No debounce,Enable debounce"
bitfld.long 0x00 17. "  [17] ,External signal debounce of bit[17] enable" "No debounce,Enable debounce"
bitfld.long 0x00 16. "  [16] ,External signal debounce of bit[16] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 15. " [15]                   ,External signal debounce of bit[15] enable" "No debounce,Enable debounce"
bitfld.long 0x00 14. "  [14] ,External signal debounce of bit[14] enable" "No debounce,Enable debounce"
bitfld.long 0x00 13. "  [13] ,External signal debounce of bit[13] enable" "No debounce,Enable debounce"
bitfld.long 0x00 12. "  [12] ,External signal debounce of bit[12] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 11. " [11]                   ,External signal debounce of bit[11] enable" "No debounce,Enable debounce"
bitfld.long 0x00 10. "  [10] ,External signal debounce of bit[10] enable" "No debounce,Enable debounce"
bitfld.long 0x00 9. "  [9]  ,External signal debounce of bit[9] enable" "No debounce,Enable debounce"
bitfld.long 0x00 8. "  [8]  ,External signal debounce of bit[8] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 7. " [7]                    ,External signal debounce of bit[7] enable" "No debounce,Enable debounce"
bitfld.long 0x00 6. "  [6]  ,External signal debounce of bit[6] enable" "No debounce,Enable debounce"
bitfld.long 0x00 5. "  [5]  ,External signal debounce of bit[5] enable" "No debounce,Enable debounce"
bitfld.long 0x00 4. "  [4]  ,External signal debounce of bit[4] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 3. " [3]                    ,External signal debounce of bit[3] enable" "No debounce,Enable debounce"
bitfld.long 0x00 2. "  [2]  ,External signal debounce of bit[2] enable" "No debounce,Enable debounce"
bitfld.long 0x00 1. "  [1]  ,External signal debounce of bit[1] enable" "No debounce,Enable debounce"
bitfld.long 0x00 0. "  [0]  ,External signal debounce of bit[0] enable" "No debounce,Enable debounce"
wgroup.long 0x4C++0x03
line.long 0x00 "PORTA_EOI,Port A Clear Interrupt Register"
bitfld.long 0x00 23. " PORTA_EOI[23]          ,Clear edge type interrupt in bit[23] from Port A" "No clear,Clear"
bitfld.long 0x00 22. "         [22] ,Clear edge type interrupt in bit[22] from Port A" "No clear,Clear"
bitfld.long 0x00 21. "         [21] ,Clear edge type interrupt in bit[21] from Port A" "No clear,Clear"
bitfld.long 0x00 20. "         [20] ,Clear edge type interrupt in bit[20] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 19. " [19]                   ,Clear edge type interrupt in bit[19] from Port A" "No clear,Clear"
bitfld.long 0x00 18. "         [18] ,Clear edge type interrupt in bit[18] from Port A" "No clear,Clear"
bitfld.long 0x00 17. "         [17] ,Clear edge type interrupt in bit[17] from Port A" "No clear,Clear"
bitfld.long 0x00 16. "         [16] ,Clear edge type interrupt in bit[16] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 15. " [15]                   ,Clear edge type interrupt in bit[15] from Port A" "No clear,Clear"
bitfld.long 0x00 14. "         [14] ,Clear edge type interrupt in bit[14] from Port A" "No clear,Clear"
bitfld.long 0x00 13. "         [13] ,Clear edge type interrupt in bit[13] from Port A" "No clear,Clear"
bitfld.long 0x00 12. "         [12] ,Clear edge type interrupt in bit[12] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 11. " [11]                   ,Clear edge type interrupt in bit[11] from Port A" "No clear,Clear"
bitfld.long 0x00 10. "         [10] ,Clear edge type interrupt in bit[10] from Port A" "No clear,Clear"
bitfld.long 0x00 9. "         [9]  ,Clear edge type interrupt in bit[9] from Port A" "No clear,Clear"
bitfld.long 0x00 8. "         [8]  ,Clear edge type interrupt in bit[8] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 7. " [7]                    ,Clear edge type interrupt in bit[7] from Port A" "No clear,Clear"
bitfld.long 0x00 6. "         [6]  ,Clear edge type interrupt in bit[6] from Port A" "No clear,Clear"
bitfld.long 0x00 5. "         [5]  ,Clear edge type interrupt in bit[5] from Port A" "No clear,Clear"
bitfld.long 0x00 4. "         [4]  ,Clear edge type interrupt in bit[4] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 3. " [3]                    ,Clear edge type interrupt in bit[3] from Port A" "No clear,Clear"
bitfld.long 0x00 2. "         [2]  ,Clear edge type interrupt in bit[2] from Port A" "No clear,Clear"
bitfld.long 0x00 1. "         [1]  ,Clear edge type interrupt in bit[1] from Port A" "No clear,Clear"
bitfld.long 0x00 0. "         [0]  ,Clear edge type interrupt in bit[0] from Port A" "No clear,Clear"
rgroup.long 0x50++0x03
line.long 0x00 "EXT_PORTA,Port A External Port Register"
bitfld.long 0x00 23. " EXT_PORTA[23]          ,External Port A signal 23" "Low,High"
bitfld.long 0x00 22. "             [22] ,External Port A signal 22" "Low,High"
bitfld.long 0x00 21. "             [21] ,External Port A signal 21" "Low,High"
bitfld.long 0x00 20. "             [20] ,External Port A signal 20" "Low,High"
newline
bitfld.long 0x00 19. " [19]                   ,External Port A signal 19" "Low,High"
bitfld.long 0x00 18. "             [18] ,External Port A signal 18" "Low,High"
bitfld.long 0x00 17. "             [17] ,External Port A signal 17" "Low,High"
bitfld.long 0x00 16. "             [16] ,External Port A signal 16" "Low,High"
newline
bitfld.long 0x00 15. " [15]                   ,External Port A signal 15" "Low,High"
bitfld.long 0x00 14. "             [14] ,External Port A signal 14" "Low,High"
bitfld.long 0x00 13. "             [13] ,External Port A signal 13" "Low,High"
bitfld.long 0x00 12. "             [12] ,External Port A signal 12" "Low,High"
newline
bitfld.long 0x00 11. " [11]                   ,External Port A signal 11" "Low,High"
bitfld.long 0x00 10. "             [10] ,External Port A signal 10" "Low,High"
bitfld.long 0x00 9. "             [9]  ,External Port A signal 9" "Low,High"
bitfld.long 0x00 8. "             [8]  ,External Port A signal 8" "Low,High"
newline
bitfld.long 0x00 7. " [7]                    ,External Port A signal 7" "Low,High"
bitfld.long 0x00 6. "             [6]  ,External Port A signal 6" "Low,High"
bitfld.long 0x00 5. "             [5]  ,External Port A signal 5" "Low,High"
bitfld.long 0x00 4. "             [4]  ,External Port A signal 4" "Low,High"
newline
bitfld.long 0x00 3. " [3]                    ,External Port A signal 3" "Low,High"
bitfld.long 0x00 2. "             [2]  ,External Port A signal 2" "Low,High"
bitfld.long 0x00 1. "             [1]  ,External Port A signal 1" "Low,High"
bitfld.long 0x00 0. "             [0]  ,External Port A signal 0" "Low,High"
newline
group.long 0x60++0x03
line.long 0x00 "LS_SYNC,Synchronization Level"
bitfld.long 0x00 0. " LS_SYNC                  ,Synchronize all level-sensitive interrupts to PCLK_INTR" "Not synchronized,Synchronized"
rgroup.long 0x64++0x03
line.long 0x00 "ID_CODE,ID Code"
rgroup.long 0x6C++0x0B
line.long 0x00 "VER_ID_CODE,Component Version"
line.long 0x04 "CONFIG_REG2,Configuration Register 2"
bitfld.long 0x04 15.--19. " ENCODED_ID_PWIDTH_D      ,PWIDTH_D configuration parameter" "8bits,16bits,32bits,?..."
bitfld.long 0x04 10.--14. "                      ENCODED_ID_PWIDTH_C ,PWIDTH_C configuration parameter" "8bits,16bits,32bits,?..."
newline
bitfld.long 0x04 5.--9. " ENCODED_ID_PWIDTH_B      ,PWIDTH_B configuration parameter" "8bits,16bits,32bits,?..."
bitfld.long 0x04 0.--4. "                      ENCODED_ID_PWIDTH_A ,PWIDTH_A configuration parameter" "8bits,16bits,32bits,?..."
line.long 0x08 "CONFIG_REG1,Configuration Register 1"
bitfld.long 0x08 21. " INTERRUPT_BOTH_EDGE_TYPE ,INT_BOTH_EDGE configuration parameter" "Rising or falling,Rising and falling"
bitfld.long 0x08 16.--20. "          ENCODED_ID_WIDTH    ,ID_WIDTH configuration parameter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x08 15. "                          ID               ,ID configuration parameter" "Excluded,Included"
newline
bitfld.long 0x08 14. " ADD_ENCODED_PARAMS       ,ADD_ENCODED_PARAMS configuration parameter" "Not added,Added"
bitfld.long 0x08 13. "                   DEBOUNCE            ,DEBOUNCE configuration parameter" "Excluded,Included"
bitfld.long 0x08 12. "                    PORTA_INTR       ,PORTA_INTR configuration parameter" "Excluded,Included"
newline
bitfld.long 0x08 11. " HW_PORTD                 ,HW_PORTD configuration parameter" "Excluded,Included"
bitfld.long 0x08 10. "                    HW_PORTC            ,HW_PORTC configuration parameter" "Excluded,Included"
bitfld.long 0x08 9. "                    HW_PORTB         ,HW_PORTB configuration parameter" "Excluded,Included"
newline
bitfld.long 0x08 8. " HW_PORTA                 ,HW_PORTA configuration parameter" "Excluded,Included"
bitfld.long 0x08 7. "                    PORTD_SINGLE_CTL    ,PORTD_SINGLE_CTL configuration parameter" "Not controlled from single,Controlled from single"
bitfld.long 0x08 6. "  PORTC_SINGLE_CTL ,PORTC_SINGLE_CTL configuration parameter" "Not controlled from single,Controlled from single"
newline
bitfld.long 0x08 5. " PORTB_SINGLE_CTL         ,PORTB_SINGLE_CTL configuration parameter" "Not controlled from single,Controlled from single"
bitfld.long 0x08 4. "  PORTA_SINGLE_CTL    ,PORTA_SINGLE_CTL configuration parameter" "Not controlled from single,Controlled from single"
bitfld.long 0x08 2.--3. "  NUM_PORTS        ,NUM_PORT configuration parameter" "1,2,3,4"
newline
bitfld.long 0x08 0.--1. " APB_DATA_WIDTH           ,APB_DATA_WIDTH configuration parameter" "8bits,16bits,32bits,?..."
width 0x0B
tree.end
tree "GPIO 1"
base ad:0xFFC03300
width 15.
group.long 0x00++0x07
line.long 0x00 "SWPORTA_DR,Port A Data Register"
bitfld.long 0x00 23. " SWPORTA_DR[23]         ,Output on the I/O signal for Port A pin 23" "0,1"
bitfld.long 0x00 22. "                [22] ,Output on the I/O signal for Port A pin 22" "0,1"
bitfld.long 0x00 21. "                [21] ,Output on the I/O signal for Port A pin 21" "0,1"
bitfld.long 0x00 20. "                [20] ,Output on the I/O signal for Port A pin 20" "0,1"
newline
bitfld.long 0x00 19. " [19]                   ,Output on the I/O signal for Port A pin 19" "0,1"
bitfld.long 0x00 18. "                [18] ,Output on the I/O signal for Port A pin 18" "0,1"
bitfld.long 0x00 17. "                [17] ,Output on the I/O signal for Port A pin 17" "0,1"
bitfld.long 0x00 16. "                [16] ,Output on the I/O signal for Port A pin 16" "0,1"
newline
bitfld.long 0x00 15. " [15]                   ,Output on the I/O signal for Port A pin 15" "0,1"
bitfld.long 0x00 14. "                [14] ,Output on the I/O signal for Port A pin 14" "0,1"
bitfld.long 0x00 13. "                [13] ,Output on the I/O signal for Port A pin 13" "0,1"
bitfld.long 0x00 12. "                [12] ,Output on the I/O signal for Port A pin 12" "0,1"
newline
bitfld.long 0x00 11. " [11]                   ,Output on the I/O signal for Port A pin 11" "0,1"
bitfld.long 0x00 10. "                [10] ,Output on the I/O signal for Port A pin 10" "0,1"
bitfld.long 0x00 9. "                [9]  ,Output on the I/O signal for Port A pin 9" "0,1"
bitfld.long 0x00 8. "                [8]  ,Output on the I/O signal for Port A pin 8" "0,1"
newline
bitfld.long 0x00 7. " [7]                    ,Output on the I/O signal for Port A pin 7" "0,1"
bitfld.long 0x00 6. "                [6]  ,Output on the I/O signal for Port A pin 6" "0,1"
bitfld.long 0x00 5. "                [5]  ,Output on the I/O signal for Port A pin 5" "0,1"
bitfld.long 0x00 4. "                [4]  ,Output on the I/O signal for Port A pin 4" "0,1"
newline
bitfld.long 0x00 3. " [3]                    ,Output on the I/O signal for Port A pin 3" "0,1"
bitfld.long 0x00 2. "                [2]  ,Output on the I/O signal for Port A pin 2" "0,1"
bitfld.long 0x00 1. "                [1]  ,Output on the I/O signal for Port A pin 1" "0,1"
bitfld.long 0x00 0. "                [0]  ,Output on the I/O signal for Port A pin 0" "0,1"
line.long 0x04 "SWPORTA_DDR,Port A Data Direction Register"
bitfld.long 0x04 23. " SWPORTA_DDR[23]        ,Pin 23 data direction" "Input,Output"
bitfld.long 0x04 22. "           [22] ,Pin 22 data direction" "Input,Output"
bitfld.long 0x04 21. "           [21] ,Pin 21 data direction" "Input,Output"
bitfld.long 0x04 20. "           [20] ,Pin 20 data direction" "Input,Output"
newline
bitfld.long 0x04 19. " [19]                   ,Pin 19 data direction" "Input,Output"
bitfld.long 0x04 18. "           [18] ,Pin 18 data direction" "Input,Output"
bitfld.long 0x04 17. "           [17] ,Pin 17 data direction" "Input,Output"
bitfld.long 0x04 16. "           [16] ,Pin 16 data direction" "Input,Output"
newline
bitfld.long 0x04 15. " [15]                   ,Pin 15 data direction" "Input,Output"
bitfld.long 0x04 14. "           [14] ,Pin 14 data direction" "Input,Output"
bitfld.long 0x04 13. "           [13] ,Pin 13 data direction" "Input,Output"
bitfld.long 0x04 12. "           [12] ,Pin 12 data direction" "Input,Output"
newline
bitfld.long 0x04 11. " [11]                   ,Pin 11 data direction" "Input,Output"
bitfld.long 0x04 10. "           [10] ,Pin 10 data direction" "Input,Output"
bitfld.long 0x04 9. "           [9]  ,Pin 9 data direction" "Input,Output"
bitfld.long 0x04 8. "           [8]  ,Pin 8 data direction" "Input,Output"
newline
bitfld.long 0x04 7. " [7]                    ,Pin 7 data direction" "Input,Output"
bitfld.long 0x04 6. "           [6]  ,Pin 6 data direction" "Input,Output"
bitfld.long 0x04 5. "           [5]  ,Pin 5 data direction" "Input,Output"
bitfld.long 0x04 4. "           [4]  ,Pin 4 data direction" "Input,Output"
newline
bitfld.long 0x04 3. " [3]                    ,Pin 3 data direction" "Input,Output"
bitfld.long 0x04 2. "           [2]  ,Pin 2 data direction" "Input,Output"
bitfld.long 0x04 1. "           [1]  ,Pin 1 data direction" "Input,Output"
bitfld.long 0x04 0. "           [0]  ,Pin 0 data direction" "Input,Output"
group.long 0x30++0x0F
line.long 0x00 "INTEN,Interrupt Enable Register"
bitfld.long 0x00 23. " INTEN[23]              ,Pin 23 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 22. "         [22] ,Pin 22 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 21. "         [21] ,Pin 21 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 20. "         [20] ,Pin 20 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. " [19]                   ,Pin 19 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 18. "         [18] ,Pin 18 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 17. "         [17] ,Pin 17 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 16. "         [16] ,Pin 16 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. " [15]                   ,Pin 15 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "         [14] ,Pin 14 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "         [13] ,Pin 13 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 12. "         [12] ,Pin 12 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. " [11]                   ,Pin 11 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 10. "         [10] ,Pin 10 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 9. "         [9]  ,Pin 9 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "         [8]  ,Pin 8 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. " [7]                    ,Pin 7 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 6. "         [6]  ,Pin 6 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "         [5]  ,Pin 5 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "         [4]  ,Pin 4 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " [3]                    ,Pin 3 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "         [2]  ,Pin 2 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "         [1]  ,Pin 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "         [0]  ,Pin 0 interrupt enable" "Disabled,Enabled"
line.long 0x04 "INTMASK,Interrupt Mask Register"
bitfld.long 0x04 23. " INTMASK[23]            ,Controls whether an interrupt on bit[23] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 22. "         [22] ,Controls whether an interrupt on bit[22] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 21. "         [21] ,Controls whether an interrupt on bit[21] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 20. "         [20] ,Controls whether an interrupt on bit[20] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 19. " [19]                   ,Controls whether an interrupt on bit[19] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 18. "         [18] ,Controls whether an interrupt on bit[18] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 17. "         [17] ,Controls whether an interrupt on bit[17] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 16. "         [16] ,Controls whether an interrupt on bit[16] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 15. " [15]                   ,Controls whether an interrupt on bit[15] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 14. "         [14] ,Controls whether an interrupt on bit[14] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 13. "         [13] ,Controls whether an interrupt on bit[13] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 12. "         [12] ,Controls whether an interrupt on bit[12] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 11. " [11]                   ,Controls whether an interrupt on bit[11] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 10. "         [10] ,Controls whether an interrupt on bit[10] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 9. "         [9]  ,Controls whether an interrupt on bit[9] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 8. "         [8]  ,Controls whether an interrupt on bit[8] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 7. " [7]                    ,Controls whether an interrupt on bit[7] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 6. "         [6]  ,Controls whether an interrupt on bit[6] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 5. "         [5]  ,Controls whether an interrupt on bit[5] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 4. "         [4]  ,Controls whether an interrupt on bit[4] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
newline
bitfld.long 0x04 3. " [3]                    ,Controls whether an interrupt on bit[3] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 2. "         [2]  ,Controls whether an interrupt on bit[2] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 1. "         [1]  ,Controls whether an interrupt on bit[1] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
bitfld.long 0x04 0. "         [0]  ,Controls whether an interrupt on bit[0] of Port A can create an interrupt for the interrupt controller by not masking it" "Unmasked,Masked"
line.long 0x08 "INTTYPE_LEVEL,Interrupt Level"
bitfld.long 0x08 23. " GPIO_INTTYPE_LEVEL[23] ,Interrupt type on bit[23] of Port A" "Level,Edge"
bitfld.long 0x08 22. "            [22] ,Interrupt type on bit[22] of Port A" "Level,Edge"
bitfld.long 0x08 21. "            [21] ,Interrupt type on bit[21] of Port A" "Level,Edge"
bitfld.long 0x08 20. "            [20] ,Interrupt type on bit[20] of Port A" "Level,Edge"
newline
bitfld.long 0x08 19. " [19]                   ,Interrupt type on bit[19] of Port A" "Level,Edge"
bitfld.long 0x08 18. "            [18] ,Interrupt type on bit[18] of Port A" "Level,Edge"
bitfld.long 0x08 17. "            [17] ,Interrupt type on bit[17] of Port A" "Level,Edge"
bitfld.long 0x08 16. "            [16] ,Interrupt type on bit[16] of Port A" "Level,Edge"
newline
bitfld.long 0x08 15. " [15]                   ,Interrupt type on bit[15] of Port A" "Level,Edge"
bitfld.long 0x08 14. "            [14] ,Interrupt type on bit[14] of Port A" "Level,Edge"
bitfld.long 0x08 13. "            [13] ,Interrupt type on bit[13] of Port A" "Level,Edge"
bitfld.long 0x08 12. "            [12] ,Interrupt type on bit[12] of Port A" "Level,Edge"
newline
bitfld.long 0x08 11. " [11]                   ,Interrupt type on bit[11] of Port A" "Level,Edge"
bitfld.long 0x08 10. "            [10] ,Interrupt type on bit[10] of Port A" "Level,Edge"
bitfld.long 0x08 9. "            [9]  ,Interrupt type on bit[9] of Port A" "Level,Edge"
bitfld.long 0x08 8. "            [8]  ,Interrupt type on bit[8] of Port A" "Level,Edge"
newline
bitfld.long 0x08 7. " [7]                    ,Interrupt type on bit[7] of Port A" "Level,Edge"
bitfld.long 0x08 6. "            [6]  ,Interrupt type on bit[6] of Port A" "Level,Edge"
bitfld.long 0x08 5. "            [5]  ,Interrupt type on bit[5] of Port A" "Level,Edge"
bitfld.long 0x08 4. "            [4]  ,Interrupt type on bit[4] of Port A" "Level,Edge"
newline
bitfld.long 0x08 3. " [3]                    ,Interrupt type on bit[3] of Port A" "Level,Edge"
bitfld.long 0x08 2. "            [2]  ,Interrupt type on bit[2] of Port A" "Level,Edge"
bitfld.long 0x08 1. "            [1]  ,Interrupt type on bit[1] of Port A" "Level,Edge"
bitfld.long 0x08 0. "            [0]  ,Interrupt type on bit[0] of Port A" "Level,Edge"
line.long 0x0C "INT_POLARITY,Interrupt Polarity"
bitfld.long 0x0C 23. " INT_POLARITY[23]       ,Polarity of edge or level sensitivity on bit[23] input of Port A" "Low,High"
bitfld.long 0x0C 22. "             [22] ,Polarity of edge or level sensitivity on bit[22] input of Port A" "Low,High"
bitfld.long 0x0C 21. "             [21] ,Polarity of edge or level sensitivity on bit[21] input of Port A" "Low,High"
bitfld.long 0x0C 20. "             [20] ,Polarity of edge or level sensitivity on bit[20] input of Port A" "Low,High"
newline
bitfld.long 0x0C 19. " [19]                   ,Polarity of edge or level sensitivity on bit[19] input of Port A" "Low,High"
bitfld.long 0x0C 18. "             [18] ,Polarity of edge or level sensitivity on bit[18] input of Port A" "Low,High"
bitfld.long 0x0C 17. "             [17] ,Polarity of edge or level sensitivity on bit[17] input of Port A" "Low,High"
bitfld.long 0x0C 16. "             [16] ,Polarity of edge or level sensitivity on bit[16] input of Port A" "Low,High"
newline
bitfld.long 0x0C 15. " [15]                   ,Polarity of edge or level sensitivity on bit[15] input of Port A" "Low,High"
bitfld.long 0x0C 14. "             [14] ,Polarity of edge or level sensitivity on bit[14] input of Port A" "Low,High"
bitfld.long 0x0C 13. "             [13] ,Polarity of edge or level sensitivity on bit[13] input of Port A" "Low,High"
bitfld.long 0x0C 12. "             [12] ,Polarity of edge or level sensitivity on bit[12] input of Port A" "Low,High"
newline
bitfld.long 0x0C 11. " [11]                   ,Polarity of edge or level sensitivity on bit[11] input of Port A" "Low,High"
bitfld.long 0x0C 10. "             [10] ,Polarity of edge or level sensitivity on bit[10] input of Port A" "Low,High"
bitfld.long 0x0C 9. "             [9]  ,Polarity of edge or level sensitivity on bit[9] input of Port A" "Low,High"
bitfld.long 0x0C 8. "             [8]  ,Polarity of edge or level sensitivity on bit[8] input of Port A" "Low,High"
newline
bitfld.long 0x0C 7. " [7]                    ,Polarity of edge or level sensitivity on bit[7] input of Port A" "Low,High"
bitfld.long 0x0C 6. "             [6]  ,Polarity of edge or level sensitivity on bit[6] input of Port A" "Low,High"
bitfld.long 0x0C 5. "             [5]  ,Polarity of edge or level sensitivity on bit[5] input of Port A" "Low,High"
bitfld.long 0x0C 4. "             [4]  ,Polarity of edge or level sensitivity on bit[4] input of Port A" "Low,High"
newline
bitfld.long 0x0C 3. " [3]                    ,Polarity of edge or level sensitivity on bit[3] input of Port A" "Low,High"
bitfld.long 0x0C 2. "             [2]  ,Polarity of edge or level sensitivity on bit[2] input of Port A" "Low,High"
bitfld.long 0x0C 1. "             [1]  ,Polarity of edge or level sensitivity on bit[1] input of Port A" "Low,High"
bitfld.long 0x0C 0. "             [0]  ,Polarity of edge or level sensitivity on bit[0] input of Port A" "Low,High"
rgroup.long 0x40++0x07
line.long 0x00 "INTSTATUS,Interrupt Status"
bitfld.long 0x00 23. " INTSTATUS[23]          ,Interrupt status of bit[23] in Port A" "Inactive,Active"
bitfld.long 0x00 22. "         [22] ,Interrupt status of bit[22] in Port A" "Inactive,Active"
bitfld.long 0x00 21. "         [21] ,Interrupt status of bit[21] in Port A" "Inactive,Active"
bitfld.long 0x00 20. "         [20] ,Interrupt status of bit[20] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 19. " [19]                   ,Interrupt status of bit[19] in Port A" "Inactive,Active"
bitfld.long 0x00 18. "         [18] ,Interrupt status of bit[18] in Port A" "Inactive,Active"
bitfld.long 0x00 17. "         [17] ,Interrupt status of bit[17] in Port A" "Inactive,Active"
bitfld.long 0x00 16. "         [16] ,Interrupt status of bit[16] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 15. " [15]                   ,Interrupt status of bit[15] in Port A" "Inactive,Active"
bitfld.long 0x00 14. "         [14] ,Interrupt status of bit[14] in Port A" "Inactive,Active"
bitfld.long 0x00 13. "         [13] ,Interrupt status of bit[13] in Port A" "Inactive,Active"
bitfld.long 0x00 12. "         [12] ,Interrupt status of bit[12] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 11. " [11]                   ,Interrupt status of bit[11] in Port A" "Inactive,Active"
bitfld.long 0x00 10. "         [10] ,Interrupt status of bit[10] in Port A" "Inactive,Active"
bitfld.long 0x00 9. "         [9]  ,Interrupt status of bit[9] in Port A" "Inactive,Active"
bitfld.long 0x00 8. "         [8]  ,Interrupt status of bit[8] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 7. " [7]                    ,Interrupt status of bit[7] in Port A" "Inactive,Active"
bitfld.long 0x00 6. "         [6]  ,Interrupt status of bit[6] in Port A" "Inactive,Active"
bitfld.long 0x00 5. "         [5]  ,Interrupt status of bit[5] in Port A" "Inactive,Active"
bitfld.long 0x00 4. "         [4]  ,Interrupt status of bit[4] in Port A" "Inactive,Active"
newline
bitfld.long 0x00 3. " [3]                    ,Interrupt status of bit[3] in Port A" "Inactive,Active"
bitfld.long 0x00 2. "         [2]  ,Interrupt status of bit[2] in Port A" "Inactive,Active"
bitfld.long 0x00 1. "         [1]  ,Interrupt status of bit[1] in Port A" "Inactive,Active"
bitfld.long 0x00 0. "         [0]  ,Interrupt status of bit[0] in Port A" "Inactive,Active"
line.long 0x04 "RAW_INTSTATUS,Raw Interrupt Status"
bitfld.long 0x04 23. " RAW_INTSTATUS[23]      ,Raw interrupt of status of bit[23] Port A" "Inactive,Active"
bitfld.long 0x04 22. "         [22] ,Raw interrupt of status of bit[22] Port A" "Inactive,Active"
bitfld.long 0x04 21. "         [21] ,Raw interrupt of status of bit[21] Port A" "Inactive,Active"
bitfld.long 0x04 20. "         [20] ,Raw interrupt of status of bit[20] Port A" "Inactive,Active"
newline
bitfld.long 0x04 19. " [19]                   ,Raw interrupt of status of bit[19] Port A" "Inactive,Active"
bitfld.long 0x04 18. "         [18] ,Raw interrupt of status of bit[18] Port A" "Inactive,Active"
bitfld.long 0x04 17. "         [17] ,Raw interrupt of status of bit[17] Port A" "Inactive,Active"
bitfld.long 0x04 16. "         [16] ,Raw interrupt of status of bit[16] Port A" "Inactive,Active"
newline
bitfld.long 0x04 15. " [15]                   ,Raw interrupt of status of bit[15] Port A" "Inactive,Active"
bitfld.long 0x04 14. "         [14] ,Raw interrupt of status of bit[14] Port A" "Inactive,Active"
bitfld.long 0x04 13. "         [13] ,Raw interrupt of status of bit[13] Port A" "Inactive,Active"
bitfld.long 0x04 12. "         [12] ,Raw interrupt of status of bit[12] Port A" "Inactive,Active"
newline
bitfld.long 0x04 11. " [11]                   ,Raw interrupt of status of bit[11] Port A" "Inactive,Active"
bitfld.long 0x04 10. "         [10] ,Raw interrupt of status of bit[10] Port A" "Inactive,Active"
bitfld.long 0x04 9. "         [9]  ,Raw interrupt of status of bit[9] Port A" "Inactive,Active"
bitfld.long 0x04 8. "         [8]  ,Raw interrupt of status of bit[8] Port A" "Inactive,Active"
newline
bitfld.long 0x04 7. " [7]                    ,Raw interrupt of status of bit[7] Port A" "Inactive,Active"
bitfld.long 0x04 6. "         [6]  ,Raw interrupt of status of bit[6] Port A" "Inactive,Active"
bitfld.long 0x04 5. "         [5]  ,Raw interrupt of status of bit[5] Port A" "Inactive,Active"
bitfld.long 0x04 4. "         [4]  ,Raw interrupt of status of bit[4] Port A" "Inactive,Active"
newline
bitfld.long 0x04 3. " [3]                    ,Raw interrupt of status of bit[3] Port A" "Inactive,Active"
bitfld.long 0x04 2. "         [2]  ,Raw interrupt of status of bit[2] Port A" "Inactive,Active"
bitfld.long 0x04 1. "         [1]  ,Raw interrupt of status of bit[1] Port A" "Inactive,Active"
bitfld.long 0x04 0. "         [0]  ,Raw interrupt of status of bit[0] Port A" "Inactive,Active"
group.long 0x48++0x03
line.long 0x00 "DEBOUNCE,Debounce Enable"
bitfld.long 0x00 23. " DEBOUNCE[23]           ,External signal debounce of bit[23] enable" "No debounce,Enable debounce"
bitfld.long 0x00 22. "  [22] ,External signal debounce of bit[22] enable" "No debounce,Enable debounce"
bitfld.long 0x00 21. "  [21] ,External signal debounce of bit[21] enable" "No debounce,Enable debounce"
bitfld.long 0x00 20. "  [20] ,External signal debounce of bit[20] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 19. " [19]                   ,External signal debounce of bit[19] enable" "No debounce,Enable debounce"
bitfld.long 0x00 18. "  [18] ,External signal debounce of bit[18] enable" "No debounce,Enable debounce"
bitfld.long 0x00 17. "  [17] ,External signal debounce of bit[17] enable" "No debounce,Enable debounce"
bitfld.long 0x00 16. "  [16] ,External signal debounce of bit[16] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 15. " [15]                   ,External signal debounce of bit[15] enable" "No debounce,Enable debounce"
bitfld.long 0x00 14. "  [14] ,External signal debounce of bit[14] enable" "No debounce,Enable debounce"
bitfld.long 0x00 13. "  [13] ,External signal debounce of bit[13] enable" "No debounce,Enable debounce"
bitfld.long 0x00 12. "  [12] ,External signal debounce of bit[12] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 11. " [11]                   ,External signal debounce of bit[11] enable" "No debounce,Enable debounce"
bitfld.long 0x00 10. "  [10] ,External signal debounce of bit[10] enable" "No debounce,Enable debounce"
bitfld.long 0x00 9. "  [9]  ,External signal debounce of bit[9] enable" "No debounce,Enable debounce"
bitfld.long 0x00 8. "  [8]  ,External signal debounce of bit[8] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 7. " [7]                    ,External signal debounce of bit[7] enable" "No debounce,Enable debounce"
bitfld.long 0x00 6. "  [6]  ,External signal debounce of bit[6] enable" "No debounce,Enable debounce"
bitfld.long 0x00 5. "  [5]  ,External signal debounce of bit[5] enable" "No debounce,Enable debounce"
bitfld.long 0x00 4. "  [4]  ,External signal debounce of bit[4] enable" "No debounce,Enable debounce"
newline
bitfld.long 0x00 3. " [3]                    ,External signal debounce of bit[3] enable" "No debounce,Enable debounce"
bitfld.long 0x00 2. "  [2]  ,External signal debounce of bit[2] enable" "No debounce,Enable debounce"
bitfld.long 0x00 1. "  [1]  ,External signal debounce of bit[1] enable" "No debounce,Enable debounce"
bitfld.long 0x00 0. "  [0]  ,External signal debounce of bit[0] enable" "No debounce,Enable debounce"
wgroup.long 0x4C++0x03
line.long 0x00 "PORTA_EOI,Port A Clear Interrupt Register"
bitfld.long 0x00 23. " PORTA_EOI[23]          ,Clear edge type interrupt in bit[23] from Port A" "No clear,Clear"
bitfld.long 0x00 22. "         [22] ,Clear edge type interrupt in bit[22] from Port A" "No clear,Clear"
bitfld.long 0x00 21. "         [21] ,Clear edge type interrupt in bit[21] from Port A" "No clear,Clear"
bitfld.long 0x00 20. "         [20] ,Clear edge type interrupt in bit[20] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 19. " [19]                   ,Clear edge type interrupt in bit[19] from Port A" "No clear,Clear"
bitfld.long 0x00 18. "         [18] ,Clear edge type interrupt in bit[18] from Port A" "No clear,Clear"
bitfld.long 0x00 17. "         [17] ,Clear edge type interrupt in bit[17] from Port A" "No clear,Clear"
bitfld.long 0x00 16. "         [16] ,Clear edge type interrupt in bit[16] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 15. " [15]                   ,Clear edge type interrupt in bit[15] from Port A" "No clear,Clear"
bitfld.long 0x00 14. "         [14] ,Clear edge type interrupt in bit[14] from Port A" "No clear,Clear"
bitfld.long 0x00 13. "         [13] ,Clear edge type interrupt in bit[13] from Port A" "No clear,Clear"
bitfld.long 0x00 12. "         [12] ,Clear edge type interrupt in bit[12] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 11. " [11]                   ,Clear edge type interrupt in bit[11] from Port A" "No clear,Clear"
bitfld.long 0x00 10. "         [10] ,Clear edge type interrupt in bit[10] from Port A" "No clear,Clear"
bitfld.long 0x00 9. "         [9]  ,Clear edge type interrupt in bit[9] from Port A" "No clear,Clear"
bitfld.long 0x00 8. "         [8]  ,Clear edge type interrupt in bit[8] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 7. " [7]                    ,Clear edge type interrupt in bit[7] from Port A" "No clear,Clear"
bitfld.long 0x00 6. "         [6]  ,Clear edge type interrupt in bit[6] from Port A" "No clear,Clear"
bitfld.long 0x00 5. "         [5]  ,Clear edge type interrupt in bit[5] from Port A" "No clear,Clear"
bitfld.long 0x00 4. "         [4]  ,Clear edge type interrupt in bit[4] from Port A" "No clear,Clear"
newline
bitfld.long 0x00 3. " [3]                    ,Clear edge type interrupt in bit[3] from Port A" "No clear,Clear"
bitfld.long 0x00 2. "         [2]  ,Clear edge type interrupt in bit[2] from Port A" "No clear,Clear"
bitfld.long 0x00 1. "         [1]  ,Clear edge type interrupt in bit[1] from Port A" "No clear,Clear"
bitfld.long 0x00 0. "         [0]  ,Clear edge type interrupt in bit[0] from Port A" "No clear,Clear"
rgroup.long 0x50++0x03
line.long 0x00 "EXT_PORTA,Port A External Port Register"
bitfld.long 0x00 23. " EXT_PORTA[23]          ,External Port A signal 23" "Low,High"
bitfld.long 0x00 22. "             [22] ,External Port A signal 22" "Low,High"
bitfld.long 0x00 21. "             [21] ,External Port A signal 21" "Low,High"
bitfld.long 0x00 20. "             [20] ,External Port A signal 20" "Low,High"
newline
bitfld.long 0x00 19. " [19]                   ,External Port A signal 19" "Low,High"
bitfld.long 0x00 18. "             [18] ,External Port A signal 18" "Low,High"
bitfld.long 0x00 17. "             [17] ,External Port A signal 17" "Low,High"
bitfld.long 0x00 16. "             [16] ,External Port A signal 16" "Low,High"
newline
bitfld.long 0x00 15. " [15]                   ,External Port A signal 15" "Low,High"
bitfld.long 0x00 14. "             [14] ,External Port A signal 14" "Low,High"
bitfld.long 0x00 13. "             [13] ,External Port A signal 13" "Low,High"
bitfld.long 0x00 12. "             [12] ,External Port A signal 12" "Low,High"
newline
bitfld.long 0x00 11. " [11]                   ,External Port A signal 11" "Low,High"
bitfld.long 0x00 10. "             [10] ,External Port A signal 10" "Low,High"
bitfld.long 0x00 9. "             [9]  ,External Port A signal 9" "Low,High"
bitfld.long 0x00 8. "             [8]  ,External Port A signal 8" "Low,High"
newline
bitfld.long 0x00 7. " [7]                    ,External Port A signal 7" "Low,High"
bitfld.long 0x00 6. "             [6]  ,External Port A signal 6" "Low,High"
bitfld.long 0x00 5. "             [5]  ,External Port A signal 5" "Low,High"
bitfld.long 0x00 4. "             [4]  ,External Port A signal 4" "Low,High"
newline
bitfld.long 0x00 3. " [3]                    ,External Port A signal 3" "Low,High"
bitfld.long 0x00 2. "             [2]  ,External Port A signal 2" "Low,High"
bitfld.long 0x00 1. "             [1]  ,External Port A signal 1" "Low,High"
bitfld.long 0x00 0. "             [0]  ,External Port A signal 0" "Low,High"
newline
group.long 0x60++0x03
line.long 0x00 "LS_SYNC,Synchronization Level"
bitfld.long 0x00 0. " LS_SYNC                  ,Synchronize all level-sensitive interrupts to PCLK_INTR" "Not synchronized,Synchronized"
rgroup.long 0x64++0x03
line.long 0x00 "ID_CODE,ID Code"
rgroup.long 0x6C++0x0B
line.long 0x00 "VER_ID_CODE,Component Version"
line.long 0x04 "CONFIG_REG2,Configuration Register 2"
bitfld.long 0x04 15.--19. " ENCODED_ID_PWIDTH_D      ,PWIDTH_D configuration parameter" "8bits,16bits,32bits,?..."
bitfld.long 0x04 10.--14. "                      ENCODED_ID_PWIDTH_C ,PWIDTH_C configuration parameter" "8bits,16bits,32bits,?..."
newline
bitfld.long 0x04 5.--9. " ENCODED_ID_PWIDTH_B      ,PWIDTH_B configuration parameter" "8bits,16bits,32bits,?..."
bitfld.long 0x04 0.--4. "                      ENCODED_ID_PWIDTH_A ,PWIDTH_A configuration parameter" "8bits,16bits,32bits,?..."
line.long 0x08 "CONFIG_REG1,Configuration Register 1"
bitfld.long 0x08 21. " INTERRUPT_BOTH_EDGE_TYPE ,INT_BOTH_EDGE configuration parameter" "Rising or falling,Rising and falling"
bitfld.long 0x08 16.--20. "          ENCODED_ID_WIDTH    ,ID_WIDTH configuration parameter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x08 15. "                          ID               ,ID configuration parameter" "Excluded,Included"
newline
bitfld.long 0x08 14. " ADD_ENCODED_PARAMS       ,ADD_ENCODED_PARAMS configuration parameter" "Not added,Added"
bitfld.long 0x08 13. "                   DEBOUNCE            ,DEBOUNCE configuration parameter" "Excluded,Included"
bitfld.long 0x08 12. "                    PORTA_INTR       ,PORTA_INTR configuration parameter" "Excluded,Included"
newline
bitfld.long 0x08 11. " HW_PORTD                 ,HW_PORTD configuration parameter" "Excluded,Included"
bitfld.long 0x08 10. "                    HW_PORTC            ,HW_PORTC configuration parameter" "Excluded,Included"
bitfld.long 0x08 9. "                    HW_PORTB         ,HW_PORTB configuration parameter" "Excluded,Included"
newline
bitfld.long 0x08 8. " HW_PORTA                 ,HW_PORTA configuration parameter" "Excluded,Included"
bitfld.long 0x08 7. "                    PORTD_SINGLE_CTL    ,PORTD_SINGLE_CTL configuration parameter" "Not controlled from single,Controlled from single"
bitfld.long 0x08 6. "  PORTC_SINGLE_CTL ,PORTC_SINGLE_CTL configuration parameter" "Not controlled from single,Controlled from single"
newline
bitfld.long 0x08 5. " PORTB_SINGLE_CTL         ,PORTB_SINGLE_CTL configuration parameter" "Not controlled from single,Controlled from single"
bitfld.long 0x08 4. "  PORTA_SINGLE_CTL    ,PORTA_SINGLE_CTL configuration parameter" "Not controlled from single,Controlled from single"
bitfld.long 0x08 2.--3. "  NUM_PORTS        ,NUM_PORT configuration parameter" "1,2,3,4"
newline
bitfld.long 0x08 0.--1. " APB_DATA_WIDTH           ,APB_DATA_WIDTH configuration parameter" "8bits,16bits,32bits,?..."
width 0x0B
tree.end
tree.end
tree "TIMER (Timer System)"
tree "TIMER 0"
base ad:0xFFD00000
width 19.
group.long 0x00++0x03
line.long 0x00 "TIMER1LOADCOUNT,Load Count Register"
rgroup.long 0x04++0x03
line.long 0x00 "TIMER1CURRENTVAL,Current Value Register"
group.long 0x08++0x03
line.long 0x00 "TIMER1CONTROLREG,Control Register"
bitfld.long 0x00 2. " TIMER_INTERRUPT_MASK ,Timer interrupt mask for timer1" "Unmasked,Masked"
bitfld.long 0x00 1. "  TIMER_MODE ,Timer mode for timer1" "Free_running,User_defined count"
bitfld.long 0x00 0. "  TIMER_ENABLE ,Timer enable bit for timer1" "Disabled,Enabled"
rgroup.long 0x0C++0x07
line.long 0x00 "TIMER1EOI,End-of-Interrupt Register"
bitfld.long 0x00 0. " TIMER1EOI            ,Reading from this register returns all zeros (0) and clears the interrupt from timer1" "0,1"
line.long 0x04 "TIMER1INTSTAT,Interrupt Status Register"
bitfld.long 0x04 0. " TIMER1INTSTAT        ,Contains the interrupt status for timer1" "Inactive,Active"
rgroup.long 0xA0++0x0F
line.long 0x00 "TIMERSINTSTAT,Timers Interrupt Status Register"
bitfld.long 0x00 0. " TIMERSINTSTAT        ,Contains the interrupt status of all timers in the component" "Inactive,Active"
line.long 0x04 "TIMERSEOI,Timers End-of-Interrupt Register"
bitfld.long 0x04 0. " TIMERSEOI            ,Reading this register returns all zeros (0) and clears all active interrupts" "0,1"
line.long 0x08 "TIMERSRAWINTSTAT,Timers Raw Interrupt Status Register"
bitfld.long 0x08 0. " TIMERSRAWINTSTAT     ,The register contains the unmasked interrupt status of all timers in the component" "Inactive,Active"
line.long 0x0C "TIMERSCOMPVERSION,Timers Component Version"
width 0x0B
tree.end
tree "TIMER 1"
base ad:0xFFD00100
width 19.
group.long 0x00++0x03
line.long 0x00 "TIMER1LOADCOUNT,Load Count Register"
rgroup.long 0x04++0x03
line.long 0x00 "TIMER1CURRENTVAL,Current Value Register"
group.long 0x08++0x03
line.long 0x00 "TIMER1CONTROLREG,Control Register"
bitfld.long 0x00 2. " TIMER_INTERRUPT_MASK ,Timer interrupt mask for timer1" "Unmasked,Masked"
bitfld.long 0x00 1. "  TIMER_MODE ,Timer mode for timer1" "Free_running,User_defined count"
bitfld.long 0x00 0. "  TIMER_ENABLE ,Timer enable bit for timer1" "Disabled,Enabled"
rgroup.long 0x0C++0x07
line.long 0x00 "TIMER1EOI,End-of-Interrupt Register"
bitfld.long 0x00 0. " TIMER1EOI            ,Reading from this register returns all zeros (0) and clears the interrupt from timer1" "0,1"
line.long 0x04 "TIMER1INTSTAT,Interrupt Status Register"
bitfld.long 0x04 0. " TIMER1INTSTAT        ,Contains the interrupt status for timer1" "Inactive,Active"
rgroup.long 0xA0++0x0F
line.long 0x00 "TIMERSINTSTAT,Timers Interrupt Status Register"
bitfld.long 0x00 0. " TIMERSINTSTAT        ,Contains the interrupt status of all timers in the component" "Inactive,Active"
line.long 0x04 "TIMERSEOI,Timers End-of-Interrupt Register"
bitfld.long 0x04 0. " TIMERSEOI            ,Reading this register returns all zeros (0) and clears all active interrupts" "0,1"
line.long 0x08 "TIMERSRAWINTSTAT,Timers Raw Interrupt Status Register"
bitfld.long 0x08 0. " TIMERSRAWINTSTAT     ,The register contains the unmasked interrupt status of all timers in the component" "Inactive,Active"
line.long 0x0C "TIMERSCOMPVERSION,Timers Component Version"
width 0x0B
tree.end
tree.end
tree.open "TIMER_SP (Timer SP)"
tree "TIMER_SP0"
base ad:0xFFC03000
width 19.
group.long 0x00++0x03
line.long 0x00 "TIMER1LOADCOUNT,Load Count Register"
rgroup.long 0x04++0x03
line.long 0x00 "TIMER1CURRENTVAL,Current Value Register"
group.long 0x08++0x03
line.long 0x00 "TIMER1CONTROLREG,Control Register"
bitfld.long 0x00 2. " TIMER_INTERRUPT_MASK ,Timer interrupt mask for timer1" "Unmasked,Masked"
bitfld.long 0x00 1. "  TIMER_MODE ,Timer mode for timer1" "Free_running,User_defined count"
bitfld.long 0x00 0. "  TIMER_ENABLE ,Timer enable bit for timer1" "Disabled,Enabled"
rgroup.long 0x0C++0x07
line.long 0x00 "TIMER1EOI,End-of-Interrupt Register"
bitfld.long 0x00 0. " TIMER1EOI            ,Reading from this register returns all zeros (0) and clears the interrupt from timer1" "0,1"
line.long 0x04 "TIMER1INTSTAT,Interrupt Status Register"
bitfld.long 0x04 0. " TIMER1INTSTAT        ,Contains the interrupt status for timer1" "Inactive,Active"
rgroup.long 0xA0++0x0F
line.long 0x00 "TIMERSINTSTAT,Timers Interrupt Status Register"
bitfld.long 0x00 0. " TIMERSINTSTAT        ,Contains the interrupt status of all timers in the component" "Inactive,Active"
line.long 0x04 "TIMERSEOI,Timers End-of-Interrupt Register"
bitfld.long 0x04 0. " TIMERSEOI            ,Reading this register returns all zeros (0) and clears all active interrupts" "0,1"
line.long 0x08 "TIMERSRAWINTSTAT,Timers Raw Interrupt Status Register"
bitfld.long 0x08 0. " TIMERSRAWINTSTAT     ,The register contains the unmasked interrupt status of all timers in the component" "Inactive,Active"
line.long 0x0C "TIMERSCOMPVERSION,Timers Component Version"
width 0x0B
tree.end
tree "TIMER_SP1"
base ad:0xFFC03100
width 19.
group.long 0x00++0x03
line.long 0x00 "TIMER1LOADCOUNT,Load Count Register"
rgroup.long 0x04++0x03
line.long 0x00 "TIMER1CURRENTVAL,Current Value Register"
group.long 0x08++0x03
line.long 0x00 "TIMER1CONTROLREG,Control Register"
bitfld.long 0x00 2. " TIMER_INTERRUPT_MASK ,Timer interrupt mask for timer1" "Unmasked,Masked"
bitfld.long 0x00 1. "  TIMER_MODE ,Timer mode for timer1" "Free_running,User_defined count"
bitfld.long 0x00 0. "  TIMER_ENABLE ,Timer enable bit for timer1" "Disabled,Enabled"
rgroup.long 0x0C++0x07
line.long 0x00 "TIMER1EOI,End-of-Interrupt Register"
bitfld.long 0x00 0. " TIMER1EOI            ,Reading from this register returns all zeros (0) and clears the interrupt from timer1" "0,1"
line.long 0x04 "TIMER1INTSTAT,Interrupt Status Register"
bitfld.long 0x04 0. " TIMER1INTSTAT        ,Contains the interrupt status for timer1" "Inactive,Active"
rgroup.long 0xA0++0x0F
line.long 0x00 "TIMERSINTSTAT,Timers Interrupt Status Register"
bitfld.long 0x00 0. " TIMERSINTSTAT        ,Contains the interrupt status of all timers in the component" "Inactive,Active"
line.long 0x04 "TIMERSEOI,Timers End-of-Interrupt Register"
bitfld.long 0x04 0. " TIMERSEOI            ,Reading this register returns all zeros (0) and clears all active interrupts" "0,1"
line.long 0x08 "TIMERSRAWINTSTAT,Timers Raw Interrupt Status Register"
bitfld.long 0x08 0. " TIMERSRAWINTSTAT     ,The register contains the unmasked interrupt status of all timers in the component" "Inactive,Active"
line.long 0x0C "TIMERSCOMPVERSION,Timers Component Version"
width 0x0B
tree.end
tree.end
tree.open "WDT (Watchdog Timer)"
tree "WDT 0"
base ad:0xFFD00200
width 14.
if ((per.l(ad:0xFFD00200+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00200+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00200+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00200+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00200+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00200+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00200+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00200+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00200+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00200+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00200+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00200+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00200+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00200+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00200+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00200+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00200+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00200+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00200+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00200+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00200+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
else
rgroup.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
endif
if ((per.l(ad:0xFFD00200+0xF4)&0x20)==0x00)
if ((per.l(ad:0xFFD00200+0xF4)&0x40)==0x00)
group.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "USER_TOP_INIT_0,USER_TOP_INIT_1,USER_TOP_INIT_2,USER_TOP_INIT_3,USER_TOP_INIT_4,USER_TOP_INIT_5,USER_TOP_INIT_6,USER_TOP_INIT_7,USER_TOP_INIT_8,USER_TOP_INIT_9,USER_TOP_INIT_10,USER_TOP_INIT_11,USER_TOP_INIT_12,USER_TOP_INIT_13,USER_TOP_INIT_14,USER_TOP_INIT_15"
bitfld.long 0x00 0.--3. "  TOP        ,Timeout period" "USER_TOP_0,USER_TOP_1,USER_TOP_2,USER_TOP_3,USER_TOP_4,USER_TOP_5,USER_TOP_6,USER_TOP_7,USER_TOP_8,USER_TOP_9,USER_TOP_10,USER_TOP_11,USER_TOP_12,USER_TOP_13,USER_TOP_14,USER_TOP_15"
else
group.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
bitfld.long 0x00 0.--3. "       TOP        ,Timeout period" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
endif
else
if ((per.l(ad:0xFFD00200+0xF4)&0x40)==0x00)
rgroup.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "USER_TOP_INIT_0,USER_TOP_INIT_1,USER_TOP_INIT_2,USER_TOP_INIT_3,USER_TOP_INIT_4,USER_TOP_INIT_5,USER_TOP_INIT_6,USER_TOP_INIT_7,USER_TOP_INIT_8,USER_TOP_INIT_9,USER_TOP_INIT_10,USER_TOP_INIT_11,USER_TOP_INIT_12,USER_TOP_INIT_13,USER_TOP_INIT_14,USER_TOP_INIT_15"
bitfld.long 0x00 0.--3. "  TOP        ,Timeout period" "USER_TOP_0,USER_TOP_1,USER_TOP_2,USER_TOP_3,USER_TOP_4,USER_TOP_5,USER_TOP_6,USER_TOP_7,USER_TOP_8,USER_TOP_9,USER_TOP_10,USER_TOP_11,USER_TOP_12,USER_TOP_13,USER_TOP_14,USER_TOP_15"
else
rgroup.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
bitfld.long 0x00 0.--3. "       TOP        ,Timeout period" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
endif
endif
rgroup.long 0x08++0x03
line.long 0x00 "CCVR,Current Counter Value Register"
wgroup.long 0x0C++0x03
line.long 0x00 "CRR,Counter Restart Register"
hexmask.long.byte 0x00 0.--7. 1. " CRR            ,Restart of the WDT counter"
rgroup.long 0x10++0x07
line.long 0x00 "STAT,Interrupt Status Register"
bitfld.long 0x00 0. " STAT           ,Shows the interrupt status of the WDT" "Inactive,Active"
line.long 0x04 "EOI,Interrupt Clear Register"
bitfld.long 0x04 0. " EOI            ,Clears the watchdog interrupt" "Not cleared,Cleared"
rgroup.long 0xF4++0x0B
line.long 0x00 "COMP_PARAM_1,Component Parameters Register 1"
bitfld.long 0x00 29.--31. " RSVD_31_29     ,RSVD_31_29" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "                 CNT_WIDTH  ,CNT_WIDTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--23. "                   DFLT_TOP_INIT ,DFLT_TOP_INIT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. " DFLT_TOP       ,DFLT_TOP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 13.--15. "                RSVD_15_13 ,RSVD_15_13" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--12. "                    DFLT_RPL      ,DFLT_RPL" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--9. " APB_DATA_WIDTH ,APB_DATA_WIDTH" "8bits,16bits,32bits,?..."
bitfld.long 0x00 7. "            PAUSE      ,Pause enable signal" "Non existent,Included"
bitfld.long 0x00 6. "         USE_FIX_TOP   ,Timeout value source" "User defined,Predefined"
newline
bitfld.long 0x00 5. " HC_TOP         ,Timeout period access" "Programmable,Hard coded"
bitfld.long 0x00 4. "      HC_RPL     ,Reset pulse length access" "Programmable,Hard coded"
bitfld.long 0x00 3. "         HC_RMOD       ,Output response mode access" "Programmable,Hard coded"
newline
bitfld.long 0x00 2. " DUAL_TOP       ,Second timeout period inherence" "Not present,Present"
bitfld.long 0x00 1. "       DFLT_RMOD  ,HC_RMOD" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  ALWAYS_EN     ,Watchdog timer on reset enable" "Disabled,Enabled"
line.long 0x04 "COMP_VERSION,Component Version Register"
line.long 0x08 "COMP_TYPE,Component Type Register"
width 0x0B
tree.end
tree "WDT 1"
base ad:0xFFD00300
width 14.
if ((per.l(ad:0xFFD00300+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00300+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00300+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00300+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00300+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00300+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00300+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00300+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00300+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00300+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00300+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00300+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00300+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00300+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00300+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00300+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00300+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00300+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00300+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00300+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00300+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
else
rgroup.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
endif
if ((per.l(ad:0xFFD00300+0xF4)&0x20)==0x00)
if ((per.l(ad:0xFFD00300+0xF4)&0x40)==0x00)
group.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "USER_TOP_INIT_0,USER_TOP_INIT_1,USER_TOP_INIT_2,USER_TOP_INIT_3,USER_TOP_INIT_4,USER_TOP_INIT_5,USER_TOP_INIT_6,USER_TOP_INIT_7,USER_TOP_INIT_8,USER_TOP_INIT_9,USER_TOP_INIT_10,USER_TOP_INIT_11,USER_TOP_INIT_12,USER_TOP_INIT_13,USER_TOP_INIT_14,USER_TOP_INIT_15"
bitfld.long 0x00 0.--3. "  TOP        ,Timeout period" "USER_TOP_0,USER_TOP_1,USER_TOP_2,USER_TOP_3,USER_TOP_4,USER_TOP_5,USER_TOP_6,USER_TOP_7,USER_TOP_8,USER_TOP_9,USER_TOP_10,USER_TOP_11,USER_TOP_12,USER_TOP_13,USER_TOP_14,USER_TOP_15"
else
group.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
bitfld.long 0x00 0.--3. "       TOP        ,Timeout period" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
endif
else
if ((per.l(ad:0xFFD00300+0xF4)&0x40)==0x00)
rgroup.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "USER_TOP_INIT_0,USER_TOP_INIT_1,USER_TOP_INIT_2,USER_TOP_INIT_3,USER_TOP_INIT_4,USER_TOP_INIT_5,USER_TOP_INIT_6,USER_TOP_INIT_7,USER_TOP_INIT_8,USER_TOP_INIT_9,USER_TOP_INIT_10,USER_TOP_INIT_11,USER_TOP_INIT_12,USER_TOP_INIT_13,USER_TOP_INIT_14,USER_TOP_INIT_15"
bitfld.long 0x00 0.--3. "  TOP        ,Timeout period" "USER_TOP_0,USER_TOP_1,USER_TOP_2,USER_TOP_3,USER_TOP_4,USER_TOP_5,USER_TOP_6,USER_TOP_7,USER_TOP_8,USER_TOP_9,USER_TOP_10,USER_TOP_11,USER_TOP_12,USER_TOP_13,USER_TOP_14,USER_TOP_15"
else
rgroup.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
bitfld.long 0x00 0.--3. "       TOP        ,Timeout period" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
endif
endif
rgroup.long 0x08++0x03
line.long 0x00 "CCVR,Current Counter Value Register"
wgroup.long 0x0C++0x03
line.long 0x00 "CRR,Counter Restart Register"
hexmask.long.byte 0x00 0.--7. 1. " CRR            ,Restart of the WDT counter"
rgroup.long 0x10++0x07
line.long 0x00 "STAT,Interrupt Status Register"
bitfld.long 0x00 0. " STAT           ,Shows the interrupt status of the WDT" "Inactive,Active"
line.long 0x04 "EOI,Interrupt Clear Register"
bitfld.long 0x04 0. " EOI            ,Clears the watchdog interrupt" "Not cleared,Cleared"
rgroup.long 0xF4++0x0B
line.long 0x00 "COMP_PARAM_1,Component Parameters Register 1"
bitfld.long 0x00 29.--31. " RSVD_31_29     ,RSVD_31_29" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "                 CNT_WIDTH  ,CNT_WIDTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--23. "                   DFLT_TOP_INIT ,DFLT_TOP_INIT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. " DFLT_TOP       ,DFLT_TOP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 13.--15. "                RSVD_15_13 ,RSVD_15_13" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--12. "                    DFLT_RPL      ,DFLT_RPL" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--9. " APB_DATA_WIDTH ,APB_DATA_WIDTH" "8bits,16bits,32bits,?..."
bitfld.long 0x00 7. "            PAUSE      ,Pause enable signal" "Non existent,Included"
bitfld.long 0x00 6. "         USE_FIX_TOP   ,Timeout value source" "User defined,Predefined"
newline
bitfld.long 0x00 5. " HC_TOP         ,Timeout period access" "Programmable,Hard coded"
bitfld.long 0x00 4. "      HC_RPL     ,Reset pulse length access" "Programmable,Hard coded"
bitfld.long 0x00 3. "         HC_RMOD       ,Output response mode access" "Programmable,Hard coded"
newline
bitfld.long 0x00 2. " DUAL_TOP       ,Second timeout period inherence" "Not present,Present"
bitfld.long 0x00 1. "       DFLT_RMOD  ,HC_RMOD" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  ALWAYS_EN     ,Watchdog timer on reset enable" "Disabled,Enabled"
line.long 0x04 "COMP_VERSION,Component Version Register"
line.long 0x08 "COMP_TYPE,Component Type Register"
width 0x0B
tree.end
tree "WDT 2"
base ad:0xFFD00400
width 14.
if ((per.l(ad:0xFFD00400+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00400+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00400+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00400+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00400+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00400+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00400+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00400+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00400+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00400+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00400+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00400+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00400+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00400+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00400+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00400+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00400+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00400+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00400+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00400+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00400+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
else
rgroup.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
endif
if ((per.l(ad:0xFFD00400+0xF4)&0x20)==0x00)
if ((per.l(ad:0xFFD00400+0xF4)&0x40)==0x00)
group.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "USER_TOP_INIT_0,USER_TOP_INIT_1,USER_TOP_INIT_2,USER_TOP_INIT_3,USER_TOP_INIT_4,USER_TOP_INIT_5,USER_TOP_INIT_6,USER_TOP_INIT_7,USER_TOP_INIT_8,USER_TOP_INIT_9,USER_TOP_INIT_10,USER_TOP_INIT_11,USER_TOP_INIT_12,USER_TOP_INIT_13,USER_TOP_INIT_14,USER_TOP_INIT_15"
bitfld.long 0x00 0.--3. "  TOP        ,Timeout period" "USER_TOP_0,USER_TOP_1,USER_TOP_2,USER_TOP_3,USER_TOP_4,USER_TOP_5,USER_TOP_6,USER_TOP_7,USER_TOP_8,USER_TOP_9,USER_TOP_10,USER_TOP_11,USER_TOP_12,USER_TOP_13,USER_TOP_14,USER_TOP_15"
else
group.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
bitfld.long 0x00 0.--3. "       TOP        ,Timeout period" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
endif
else
if ((per.l(ad:0xFFD00400+0xF4)&0x40)==0x00)
rgroup.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "USER_TOP_INIT_0,USER_TOP_INIT_1,USER_TOP_INIT_2,USER_TOP_INIT_3,USER_TOP_INIT_4,USER_TOP_INIT_5,USER_TOP_INIT_6,USER_TOP_INIT_7,USER_TOP_INIT_8,USER_TOP_INIT_9,USER_TOP_INIT_10,USER_TOP_INIT_11,USER_TOP_INIT_12,USER_TOP_INIT_13,USER_TOP_INIT_14,USER_TOP_INIT_15"
bitfld.long 0x00 0.--3. "  TOP        ,Timeout period" "USER_TOP_0,USER_TOP_1,USER_TOP_2,USER_TOP_3,USER_TOP_4,USER_TOP_5,USER_TOP_6,USER_TOP_7,USER_TOP_8,USER_TOP_9,USER_TOP_10,USER_TOP_11,USER_TOP_12,USER_TOP_13,USER_TOP_14,USER_TOP_15"
else
rgroup.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
bitfld.long 0x00 0.--3. "       TOP        ,Timeout period" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
endif
endif
rgroup.long 0x08++0x03
line.long 0x00 "CCVR,Current Counter Value Register"
wgroup.long 0x0C++0x03
line.long 0x00 "CRR,Counter Restart Register"
hexmask.long.byte 0x00 0.--7. 1. " CRR            ,Restart of the WDT counter"
rgroup.long 0x10++0x07
line.long 0x00 "STAT,Interrupt Status Register"
bitfld.long 0x00 0. " STAT           ,Shows the interrupt status of the WDT" "Inactive,Active"
line.long 0x04 "EOI,Interrupt Clear Register"
bitfld.long 0x04 0. " EOI            ,Clears the watchdog interrupt" "Not cleared,Cleared"
rgroup.long 0xF4++0x0B
line.long 0x00 "COMP_PARAM_1,Component Parameters Register 1"
bitfld.long 0x00 29.--31. " RSVD_31_29     ,RSVD_31_29" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "                 CNT_WIDTH  ,CNT_WIDTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--23. "                   DFLT_TOP_INIT ,DFLT_TOP_INIT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. " DFLT_TOP       ,DFLT_TOP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 13.--15. "                RSVD_15_13 ,RSVD_15_13" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--12. "                    DFLT_RPL      ,DFLT_RPL" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--9. " APB_DATA_WIDTH ,APB_DATA_WIDTH" "8bits,16bits,32bits,?..."
bitfld.long 0x00 7. "            PAUSE      ,Pause enable signal" "Non existent,Included"
bitfld.long 0x00 6. "         USE_FIX_TOP   ,Timeout value source" "User defined,Predefined"
newline
bitfld.long 0x00 5. " HC_TOP         ,Timeout period access" "Programmable,Hard coded"
bitfld.long 0x00 4. "      HC_RPL     ,Reset pulse length access" "Programmable,Hard coded"
bitfld.long 0x00 3. "         HC_RMOD       ,Output response mode access" "Programmable,Hard coded"
newline
bitfld.long 0x00 2. " DUAL_TOP       ,Second timeout period inherence" "Not present,Present"
bitfld.long 0x00 1. "       DFLT_RMOD  ,HC_RMOD" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  ALWAYS_EN     ,Watchdog timer on reset enable" "Disabled,Enabled"
line.long 0x04 "COMP_VERSION,Component Version Register"
line.long 0x08 "COMP_TYPE,Component Type Register"
width 0x0B
tree.end
tree "WDT 3"
base ad:0xFFD00500
width 14.
if ((per.l(ad:0xFFD00500+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00500+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00500+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00500+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00500+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00500+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00500+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00500+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00500+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00500+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00500+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00500+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00500+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00500+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00500+0xF4)&0x08)==0x00)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00500+0xF4)&0x01)==0x01)&&((per.l(ad:0xFFD00500+0xF4)&0x10)==0x00)&&((per.l(ad:0xFFD00500+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
rbitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
elif ((per.l(ad:0xFFD00500+0xF4)&0x01)==0x00)&&((per.l(ad:0xFFD00500+0xF4)&0x10)==0x10)&&((per.l(ad:0xFFD00500+0xF4)&0x08)==0x08)
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
rbitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
rbitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
else
rgroup.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 2.--4. " RPL            ,Reset pulse length" "2PCLK,4PCLK,8PCLK,16PCLK,32PCLK,64PCLK,128PCLK,256PCLK"
bitfld.long 0x00 1. "           RMOD       ,Response mode" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  EN            ,Watchdog timer enable" "Disabled,Enabled"
endif
if ((per.l(ad:0xFFD00500+0xF4)&0x20)==0x00)
if ((per.l(ad:0xFFD00500+0xF4)&0x40)==0x00)
group.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "USER_TOP_INIT_0,USER_TOP_INIT_1,USER_TOP_INIT_2,USER_TOP_INIT_3,USER_TOP_INIT_4,USER_TOP_INIT_5,USER_TOP_INIT_6,USER_TOP_INIT_7,USER_TOP_INIT_8,USER_TOP_INIT_9,USER_TOP_INIT_10,USER_TOP_INIT_11,USER_TOP_INIT_12,USER_TOP_INIT_13,USER_TOP_INIT_14,USER_TOP_INIT_15"
bitfld.long 0x00 0.--3. "  TOP        ,Timeout period" "USER_TOP_0,USER_TOP_1,USER_TOP_2,USER_TOP_3,USER_TOP_4,USER_TOP_5,USER_TOP_6,USER_TOP_7,USER_TOP_8,USER_TOP_9,USER_TOP_10,USER_TOP_11,USER_TOP_12,USER_TOP_13,USER_TOP_14,USER_TOP_15"
else
group.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
bitfld.long 0x00 0.--3. "       TOP        ,Timeout period" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
endif
else
if ((per.l(ad:0xFFD00500+0xF4)&0x40)==0x00)
rgroup.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "USER_TOP_INIT_0,USER_TOP_INIT_1,USER_TOP_INIT_2,USER_TOP_INIT_3,USER_TOP_INIT_4,USER_TOP_INIT_5,USER_TOP_INIT_6,USER_TOP_INIT_7,USER_TOP_INIT_8,USER_TOP_INIT_9,USER_TOP_INIT_10,USER_TOP_INIT_11,USER_TOP_INIT_12,USER_TOP_INIT_13,USER_TOP_INIT_14,USER_TOP_INIT_15"
bitfld.long 0x00 0.--3. "  TOP        ,Timeout period" "USER_TOP_0,USER_TOP_1,USER_TOP_2,USER_TOP_3,USER_TOP_4,USER_TOP_5,USER_TOP_6,USER_TOP_7,USER_TOP_8,USER_TOP_9,USER_TOP_10,USER_TOP_11,USER_TOP_12,USER_TOP_13,USER_TOP_14,USER_TOP_15"
else
rgroup.long 0x04++0x03
line.long 0x00 "TORR,Timeout Range Register"
bitfld.long 0x00 4.--7. " TOP_INIT       ,Timeout period for initialization" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
bitfld.long 0x00 0.--3. "       TOP        ,Timeout period" "64K Clocks,128K Clocks,256K Clocks,512K Clocks,1M Clocks,2M Clocks,4M Clocks,8M Clocks,16M Clocks,32M Clocks,64M Clocks,128M Clocks,256M Clocks,512M Clocks,1G Clocks,2G Clocks"
endif
endif
rgroup.long 0x08++0x03
line.long 0x00 "CCVR,Current Counter Value Register"
wgroup.long 0x0C++0x03
line.long 0x00 "CRR,Counter Restart Register"
hexmask.long.byte 0x00 0.--7. 1. " CRR            ,Restart of the WDT counter"
rgroup.long 0x10++0x07
line.long 0x00 "STAT,Interrupt Status Register"
bitfld.long 0x00 0. " STAT           ,Shows the interrupt status of the WDT" "Inactive,Active"
line.long 0x04 "EOI,Interrupt Clear Register"
bitfld.long 0x04 0. " EOI            ,Clears the watchdog interrupt" "Not cleared,Cleared"
rgroup.long 0xF4++0x0B
line.long 0x00 "COMP_PARAM_1,Component Parameters Register 1"
bitfld.long 0x00 29.--31. " RSVD_31_29     ,RSVD_31_29" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--28. "                 CNT_WIDTH  ,CNT_WIDTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--23. "                   DFLT_TOP_INIT ,DFLT_TOP_INIT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. " DFLT_TOP       ,DFLT_TOP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 13.--15. "                RSVD_15_13 ,RSVD_15_13" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 10.--12. "                    DFLT_RPL      ,DFLT_RPL" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--9. " APB_DATA_WIDTH ,APB_DATA_WIDTH" "8bits,16bits,32bits,?..."
bitfld.long 0x00 7. "            PAUSE      ,Pause enable signal" "Non existent,Included"
bitfld.long 0x00 6. "         USE_FIX_TOP   ,Timeout value source" "User defined,Predefined"
newline
bitfld.long 0x00 5. " HC_TOP         ,Timeout period access" "Programmable,Hard coded"
bitfld.long 0x00 4. "      HC_RPL     ,Reset pulse length access" "Programmable,Hard coded"
bitfld.long 0x00 3. "         HC_RMOD       ,Output response mode access" "Programmable,Hard coded"
newline
bitfld.long 0x00 2. " DUAL_TOP       ,Second timeout period inherence" "Not present,Present"
bitfld.long 0x00 1. "       DFLT_RMOD  ,HC_RMOD" "Reset,Interrupt and reset"
bitfld.long 0x00 0. "  ALWAYS_EN     ,Watchdog timer on reset enable" "Disabled,Enabled"
line.long 0x04 "COMP_VERSION,Component Version Register"
line.long 0x08 "COMP_TYPE,Component Type Register"
width 0x0B
tree.end
tree.end
tree.open "L3IC (L3interconnect)"
tree "Per-Master Security"
base ad:0xFFD21000
width 15.
group.long 0x00++0x03
line.long 0x00 "NAND_REGISTER,L4_PER Per-Master Security Bit For NAND_REGISTER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to NAND_REGISTER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to NAND_REGISTER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to NAND_REGISTER enable" "Disabled,Enabled"
group.long 0x04++0x03
line.long 0x00 "NAND_DATA,L4_PER Per-Master Security Bit For NAND_DATA Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to NAND_DATA enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to NAND_DATA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to NAND_DATA enable" "Disabled,Enabled"
group.long 0x0C++0x03
line.long 0x00 "USB0_REGISTER,L4_PER Per-Master Security Bit For USB0_REGISTER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to USB0_REGISTER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to USB0_REGISTER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to USB0_REGISTER enable" "Disabled,Enabled"
group.long 0x10++0x03
line.long 0x00 "USB1_REGISTER,L4_PER Per-Master Security Bit For USB1_REGISTER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to USB1_REGISTER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to USB1_REGISTER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to USB1_REGISTER enable" "Disabled,Enabled"
group.long 0x1C++0x03
line.long 0x00 "SPI_MASTER0,L4_PER Per-Master Security Bit For SPI_MASTER0 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SPI_MASTER0 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SPI_MASTER0 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to SPI_MASTER0 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SPI_MASTER0 enable" "Disabled,Enabled"
group.long 0x20++0x03
line.long 0x00 "SPI_MASTER1,L4_PER Per-Master Security Bit For SPI_MASTER1 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SPI_MASTER1 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SPI_MASTER1 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to SPI_MASTER1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SPI_MASTER1 enable" "Disabled,Enabled"
group.long 0x24++0x03
line.long 0x00 "SPI_SLAVE0,L4_PER Per-Master Security Bit For SPI_SLAVE0 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SPI_SLAVE0 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SPI_SLAVE0 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to SPI_SLAVE0 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SPI_SLAVE0 enable" "Disabled,Enabled"
group.long 0x28++0x03
line.long 0x00 "SPI_SLAVE1,L4_PER Per-Master Security Bit For SPI_SLAVE1 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SPI_SLAVE1 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SPI_SLAVE1 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to SPI_SLAVE1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SPI_SLAVE1 enable" "Disabled,Enabled"
group.long 0x2C++0x03
line.long 0x00 "EMAC0,L4_PER Per-Master Security Bit For EMAC0 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC0 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC0 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC0 enable" "Disabled,Enabled"
group.long 0x30++0x03
line.long 0x00 "EMAC1,L4_PER Per-Master Security Bit For EMAC1 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC1 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC1 enable" "Disabled,Enabled"
group.long 0x34++0x03
line.long 0x00 "EMAC2,L4_PER Per-Master Security Bit For EMAC2 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC2 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC2 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC2 enable" "Disabled,Enabled"
group.long 0x40++0x03
line.long 0x00 "SDMMC,L4_PER Per-Master Security Bit For SDMMC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SDMMC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SDMMC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SDMMC enable" "Disabled,Enabled"
group.long 0x44++0x03
line.long 0x00 "GPIO0,L4_PER Per-Master Security Bit For GPIO0 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to GPIO0 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to GPIO0 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to GPIO0 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to GPIO0 enable" "Disabled,Enabled"
group.long 0x48++0x03
line.long 0x00 "GPIO1,L4_PER Per-Master Security Bit For GPIO1 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to GPIO1 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to GPIO1 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to GPIO1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to GPIO1 enable" "Disabled,Enabled"
group.long 0x50++0x03
line.long 0x00 "I2C0,L4_PER Per-Master Security Bit For I2C0 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to I2C0 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to I2C0 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to I2C0 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to I2C0 enable" "Disabled,Enabled"
group.long 0x54++0x03
line.long 0x00 "I2C1,L4_PER Per-Master Security Bit For I2C1 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to I2C1 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to I2C1 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to I2C1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to I2C1 enable" "Disabled,Enabled"
group.long 0x58++0x03
line.long 0x00 "I2C2,L4_PER Per-Master Security Bit For I2C2 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to I2C2 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to I2C2 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to I2C2 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to I2C2 enable" "Disabled,Enabled"
group.long 0x5C++0x03
line.long 0x00 "I2C3,L4_PER Per-Master Security Bit For I2C3 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to I2C3 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to I2C3 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to I2C3 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to I2C3 enable" "Disabled,Enabled"
group.long 0x60++0x03
line.long 0x00 "I2C4,L4_PER Per-Master Security Bit For I2C4 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to I2C4 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to I2C4 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to I2C4 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to I2C4 enable" "Disabled,Enabled"
group.long 0x64++0x03
line.long 0x00 "SP_TIMER0,L4_PER Per-Master Security Bit For SP_TIMER0 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SP_TIMER0 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SP_TIMER0 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to SP_TIMER0 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SP_TIMER0 enable" "Disabled,Enabled"
group.long 0x68++0x03
line.long 0x00 "SP_TIMER1,L4_PER Per-Master Security Bit For SP_TIMER1 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SP_TIMER1 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SP_TIMER1 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to SP_TIMER1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SP_TIMER1 enable" "Disabled,Enabled"
group.long 0x6C++0x03
line.long 0x00 "UART0,L4_PER Per-Master Security Bit For UART0 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to UART0 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to UART0 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to UART0 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to UART0 enable" "Disabled,Enabled"
group.long 0x70++0x03
line.long 0x00 "UART1,L4_PER Per-Master Security Bit For UART1 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to UART1 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to UART1 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to UART1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to UART1 enable" "Disabled,Enabled"
newline
base ad:0xFFD21000+0x100
group.long 0x08++0x03
line.long 0x00 "DMA_ECC,L4_SYS Per-Master Security Bit For DMA_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to DMA_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to DMA_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to DMA_ECC enable" "Disabled,Enabled"
group.long 0x0C++0x03
line.long 0x00 "EMAC0RX_ECC,L4_SYS Per-Master Security Bit For EMAC0RX_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC0RX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC0RX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC0RX_ECC enable" "Disabled,Enabled"
group.long 0x10++0x03
line.long 0x00 "EMAC0TX_ECC,L4_SYS Per-Master Security Bit For EMAC0TX_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC0TX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC0TX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC0TX_ECC enable" "Disabled,Enabled"
group.long 0x14++0x03
line.long 0x00 "EMAC1RX_ECC,L4_SYS Per-Master Security Bit For EMAC1RX_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC1RX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC1RX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC1RX_ECC enable" "Disabled,Enabled"
group.long 0x18++0x03
line.long 0x00 "EMAC1TX_ECC,L4_SYS Per-Master Security Bit For EMAC1TX_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC1TX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC1TX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC1TX_ECC enable" "Disabled,Enabled"
group.long 0x1C++0x03
line.long 0x00 "EMAC2RX_ECC,L4_SYS Per-Master Security Bit For EMAC2RX_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC2RX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC2RX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC2RX_ECC enable" "Disabled,Enabled"
group.long 0x20++0x03
line.long 0x00 "EMAC2TX_ECC,L4_SYS Per-Master Security Bit For EMAC2TX_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to EMAC2TX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to EMAC2TX_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to EMAC2TX_ECC enable" "Disabled,Enabled"
group.long 0x2C++0x03
line.long 0x00 "NAND_ECC,L4_SYS Per-Master Security Bit For NAND_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to NAND_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to NAND_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to NAND_ECC enable" "Disabled,Enabled"
group.long 0x30++0x03
line.long 0x00 "NAND_READ_ECC,L4_SYS Per-Master Security Bit For NAND_READ_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to NAND_READ_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to NAND_READ_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to NAND_READ_ECC enable" "Disabled,Enabled"
group.long 0x34++0x03
line.long 0x00 "NAND_WRITE_ECC,L4_SYS Per-Master Security Bit For NAND_WRITE_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to NAND_WRITE_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to NAND_WRITE_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to NAND_WRITE_ECC enable" "Disabled,Enabled"
group.long 0x38++0x03
line.long 0x00 "OCRAM_ECC,L4_SYS Per-Master Security Bit For OCRAM_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to OCRAM_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to OCRAM_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to OCRAM_ECC enable" "Disabled,Enabled"
group.long 0x40++0x03
line.long 0x00 "SDMMC_ECC,L4_SYS Per-Master Security Bit For SDMMC_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SDMMC_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SDMMC_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SDMMC_ECC enable" "Disabled,Enabled"
group.long 0x44++0x03
line.long 0x00 "USB0_ECC,L4_SYS Per-Master Security Bit For USB0_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to USB0_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to USB0_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to USB0_ECC enable" "Disabled,Enabled"
group.long 0x48++0x03
line.long 0x00 "USB1_ECC,L4_SYS Per-Master Security Bit For USB1_ECC Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to USB1_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to USB1_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to USB1_ECC enable" "Disabled,Enabled"
group.long 0x4C++0x03
line.long 0x00 "CLOCK_MANAGER,L4_SYS Per-Master Security Bit For CLOCK_MANAGER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to CLOCK_MANAGER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to CLOCK_MANAGER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to CLOCK_MANAGER enable" "Disabled,Enabled"
group.long 0x54++0x03
line.long 0x00 "IO_MANAGER,L4_SYS Per-Master Security Bit For IO_MANAGER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to IO_MANAGER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to IO_MANAGER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to IO_MANAGER enable" "Disabled,Enabled"
group.long 0x58++0x03
line.long 0x00 "RESET_MANAGER,L4_SYS Per-Master Security Bit For RESET_MANAGER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to RESET_MANAGER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to RESET_MANAGER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to RESET_MANAGER enable" "Disabled,Enabled"
group.long 0x5C++0x03
line.long 0x00 "SYSTEM_MANAGER,L4_SYS Per-Master Security Bit For SYSTEM_MANAGER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to SYSTEM_MANAGER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to SYSTEM_MANAGER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SYSTEM_MANAGER enable" "Disabled,Enabled"
group.long 0x60++0x03
line.long 0x00 "OSC0_TIMER,L4_SYS Per-Master Security Bit For OSC0_TIMER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to OSC0_TIMER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to OSC0_TIMER enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to OSC0_TIMER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to OSC0_TIMER enable" "Disabled,Enabled"
group.long 0x64++0x03
line.long 0x00 "OSC1_TIMER,L4_SYS Per-Master Security Bit For OSC1_TIMER Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to OSC1_TIMER enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to OSC1_TIMER enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to OSC1_TIMER enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to OSC1_TIMER enable" "Disabled,Enabled"
group.long 0x68++0x03
line.long 0x00 "WATCHDOG0,L4_SYS Per-Master Security Bit For WATCHDOG0 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to WATCHDOG0 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to WATCHDOG0 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to WATCHDOG0 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to WATCHDOG0 enable" "Disabled,Enabled"
group.long 0x6C++0x03
line.long 0x00 "WATCHDOG1,L4_SYS Per-Master Security Bit For WATCHDOG1 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to WATCHDOG1 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to WATCHDOG1 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to WATCHDOG1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to WATCHDOG1 enable" "Disabled,Enabled"
group.long 0x70++0x03
line.long 0x00 "WATCHDOG2,L4_SYS Per-Master Security Bit For WATCHDOG2 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to WATCHDOG2 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to WATCHDOG2 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to WATCHDOG2 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to WATCHDOG2 enable" "Disabled,Enabled"
group.long 0x74++0x03
line.long 0x00 "WATCHDOG3,L4_SYS Per-Master Security Bit For WATCHDOG3 Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to WATCHDOG3 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to WATCHDOG3 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA  ,Non-secure transactions from DMA to WATCHDOG3 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to WATCHDOG3 enable" "Disabled,Enabled"
group.long 0x78++0x03
line.long 0x00 "DAP,L4_SYS Per-Master Security Bit For DAP Register"
bitfld.long 0x00 25. " ETR    ,Non-secure transaction from ETR to DAP enable" "Disabled,Enabled"
newline
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to DAP enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to DAP enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to DAP enable" "Disabled,Enabled"
group.long 0x90++0x03
line.long 0x00 "L4_NOC_PROBES,L4_SYS Per-Master Security Bit For L4_NOC_PROBES Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to L4_NOC_PROBES enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to L4_NOC_PROBES enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to L4_NOC_PROBES enable" "Disabled,Enabled"
group.long 0x94++0x03
line.long 0x00 "L4_NOC_QOS,L4_SYS Per-Master Security Bit For L4_NOC_QOS Register"
bitfld.long 0x00 24. " AXI_AP ,Non-secure transactions from AXI_AP to L4_NOC_QOS enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC ,Non-secure transactions from FPGA2SOC to L4_NOC_QOS enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to L4_NOC_QOS enable" "Disabled,Enabled"
newline
base ad:0xFFD21000+0x200
group.long 0x00++0x03
line.long 0x00 "SOC2FPGA,SOC2FPGA Per-Master SecuritY Bit For SOC2FPGA"
bitfld.long 0x00 27. " SDM_NAND ,Non-secure transactions from SDM_NAND to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 26. "  SDM_SDMMC ,Non-secure transactions from SDM_SDMMC to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 25. "  ETR   ,Non-secure transactions from ETR to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 24. "  AXI_AP ,Non-secure transactions from AXI_AP to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 23. "  NAND ,Non-secure transactions from NAND to SOC2FPGA enable" "Disabled,Enabled"
newline
bitfld.long 0x00 22. " SDMMC    ,Non-secure transactions from SDMMC to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "  USB1      ,Non-secure transactions from USB1 to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 20. "  USB0  ,Non-secure transactions from USB0 to SOC2FPGA enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. " EMAC2    ,Non-secure transactions from EMAC2 to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 18. "  EMAC1     ,Non-secure transactions from EMAC1 to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "  EMAC0 ,Non-secure transactions from EMAC0 to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA    ,Non-secure transactions from DMA to SOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to SOC2FPGA enable" "Disabled,Enabled"
group.long 0x100++0x03
line.long 0x00 "LWSOC2FPGA,LWSOC2FPGA Per-Master SecuriTy Bit For Lightweight SOC2FPGA"
bitfld.long 0x00 27. " SDM_NAND ,Non-secure transactions from SDM_NAND to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 26. "  SDM_SDMMC ,Non-secure transactions from SDM_SDMMC to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 25. "  ETR   ,Non-secure transactions from ETR to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 24. "  AXI_AP ,Non-secure transactions from AXI_AP to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 23. "  NAND ,Non-secure transactions from NAND to LWSOC2FPGA enable" "Disabled,Enabled"
newline
bitfld.long 0x00 22. " SDMMC    ,Non-secure transactions from SDMMC to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "  USB1      ,Non-secure transactions from USB1 to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 20. "  USB0  ,Non-secure transactions from USB0 to LWSOC2FPGA enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. " EMAC2    ,Non-secure transactions from EMAC2 to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 18. "  EMAC1     ,Non-secure transactions from EMAC1 to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "  EMAC0 ,Non-secure transactions from EMAC0 to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 8. "  DMA    ,Non-secure transactions from DMA to LWSOC2FPGA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU  ,Non-secure transactions from MPU to LWSOC2FPGA enable" "Disabled,Enabled"
group.long 0x200++0x03
line.long 0x00 "TCU,TCU Per-Master Security Bit For Lightweight DMA_ECC"
bitfld.long 0x00 24. " AXI_AP   ,Non-secure transactions from AXI_AP to DMA_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 16. "  FPGA2SOC  ,Non-secure transactions from FPGA2SOC to DMA_ECC enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  MPU   ,Non-secure transactions from MPU to DMA_ECC enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "CoreSight Observer Main ATB Endpoint"
base ad:0xFFD22000
width 12.
rgroup.long 0x00++0x07
line.long 0x00 "COREID,CoreSight Observer Main ATB Endpoint Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "    CORETYPEID ,Identify the type of IP"
line.long 0x04 "REVISIONID,CoreSight Observer Main ATB Endpoint Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "    USERID     ,User defined value"
group.long 0x08++0x0B
line.long 0x00 "ATBID,CoreSight Observer Main ATB Endpoint ATB ID Register"
hexmask.long.byte 0x00 0.--6. 1. " ATBID        ,ATB AtId"
line.long 0x04 "ATBEN,CoreSight Observer Main ATB Endpoint ATB Enable Register"
bitfld.long 0x04 0. " ATBEN        ,ATB unit enable" "Disabled,Enabled"
line.long 0x08 "SYNCPERIOD,CoreSight Observer Main ATB Endpoint Synchronous Period Register"
bitfld.long 0x08 0.--4. " SYNCPERIOD   ,ATB synchro period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
width 0x0B
tree.end
tree "CoreSight Observer Main Error Logger 0"
base ad:0xFFD22080
width 12.
rgroup.long 0x00++0x07
line.long 0x00 "COREID,CoreSight Observer Main Error Logger 0 Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "     CORETYPEID ,Identify the type of IP"
line.long 0x04 "REVISIONID,CoreSight Observer Main Error Logger 0 Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "     USERID     ,User defined value"
group.long 0x08++0x03
line.long 0x00 "FAULTEN,CoreSight Observer Main Error Logger 0 Fault Enable Register"
bitfld.long 0x00 0. " FAULTEN      ,Output signal fault enable" "Disabled,Enabled"
rgroup.long 0x0C++0x03
line.long 0x00 "ERRVLD,CoreSight Observer Main Error Logger 0 Error Valid Register"
bitfld.long 0x00 0. " ERRVLD       ,An error has been logged" "No error,Error"
wgroup.long 0x10++0x03
line.long 0x00 "ERRCLR,CoreSight Observer Main Error Logger 0 Error Clear Register"
bitfld.long 0x00 0. " ERRCLR       ,Clear ErrVld field" "No effect,Clear"
rgroup.long 0x14++0x07
line.long 0x00 "ERRLOG0,CoreSight Observer Main Error Logger 0 Error Log 0 Register"
bitfld.long 0x00 31. " FORMAT       ,NTTP transport protocol version" "0,1"
hexmask.long.word 0x00 16.--27. 1. "          LEN1       ,Len1"
bitfld.long 0x00 8.--10. "  ERRCODE ,Error code" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 1.--4. "  OPC ,Opc" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "  LOCK ,Lock" "Not locked,Locked"
line.long 0x04 "ERRLOG1,CoreSight Observer Main Error Logger 0 Error Log 1 Register"
hexmask.long.tbyte 0x04 0.--22. 1. " ERRLOG1      ,Stores NTTP packet header field RouteId (LSBs) of the logged error"
rgroup.long 0x20++0x0B
line.long 0x00 "ERRLOG3,CoreSight Observer Main Error Logger 0 Error Log 3 Register"
line.long 0x04 "ERRLOG4,CoreSight Observer Main Error Logger 0 Error Log 4 Register"
hexmask.long.byte 0x04 0.--7. 1. " ERRLOG4      ,Stores NTTP packet header field Addr (MSBs) of the logged error"
line.long 0x08 "ERRLOG5,CoreSight Observer Main Error Logger 0 Error Log 5 Register"
hexmask.long 0x08 0.--28. 1. " ERRLOG5      ,Stores NTTP packet header field User (LSBs) of the logged error"
rgroup.long 0x30++0x03
line.long 0x00 "ERRLOG7,CoreSight Observer Main Error Logger 0 Error Log 7 Register"
bitfld.long 0x00 0.--1. " ERRLOG7      ,Stores NTTP packet header field Security of the logged error" "0,1,2,3"
group.long 0x38++0x03
line.long 0x00 "STALLEN,CoreSight Observer Main Error Logger 0 Stall Enable Register"
bitfld.long 0x00 0. " STALLEN      ,Stall mode behavior enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "CCU Probe"
base ad:0xFFD22400
width 18.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,Probe Core ID"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM              ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "          CORETYPEID    ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,Probe Revision ID"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID                 ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "          USERID        ,User defined value"
group.long 0x08++0x07
line.long 0x00 "MAINCTL,Probe MainCtl"
bitfld.long 0x00 7. " FILTBYTEALWAYSCHAINABLEEN ,Filter mapping selection" "All,Even"
rbitfld.long 0x00 6. "            INTRUSIVEMODE ,Intrusive flow-control mode" "Overflow,Intrusive"
bitfld.long 0x00 5. "  STATCONDDUMP ,The dump of a statistics frame to the range of counter values enable" "Disabled,Enabled"
bitfld.long 0x00 4. "  ALARMEN ,Collect alarm-related information enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " STATEN                    ,Statistics profiling enable" "Disabled,Enabled"
bitfld.long 0x00 2. "        PAYLOADEN     ,Traces to contain headers and payload enable" "Disabled,Enabled"
bitfld.long 0x00 1. "   TRACEEN      ,Send filtered packets on the ObsTx observation output enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  ERREN   ,Send on the ObsTx output any packet with Error status independently enable" "Disabled,Enabled"
line.long 0x04 "CFGCTL,Probe Configuration Control"
rbitfld.long 0x04 1. " ACTIVE                    ,Active" "Not active,Active"
bitfld.long 0x04 0. "      GLOBALEN      ,Global enable" "Disabled,Enabled"
group.long 0x14++0x07
line.long 0x00 "FILTERLUT,Probe Filter Look-Up Table"
bitfld.long 0x00 0.--3. " FILTERLUT                 ,Look-up table" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "TRACEALARMEN,Probe Trace Alarm Enable"
bitfld.long 0x04 2. " TRACEALARMEN[2]           ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [2]" "0,1"
bitfld.long 0x04 1. "               [1]           ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [1]" "0,1"
bitfld.long 0x04 0. "          [0]          ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [0]" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "TRACEALARMSTATUS,Probe Trace Alarm Status"
bitfld.long 0x00 2. " TRACEALARMSTATUS[2]       ,Indicates which lookup table or filter has been matched by a packet[2]" "0,1"
bitfld.long 0x00 2. "               [1]           ,Indicates which lookup table or filter has been matched by a packet[1]" "0,1"
bitfld.long 0x00 2. "          [0]          ,Indicates which lookup table or filter has been matched by a packet[0]" "0,1"
wgroup.long 0x20++0x03
line.long 0x00 "TRACEALARMCLR,Probe Trace Alarm Clear"
bitfld.long 0x00 2. " TRACEALARMCLR[2]          ,Clear the corresponding bit in register TraceAlarmStatus [2]" "0,1"
bitfld.long 0x00 1. "               [1]           ,Clear the corresponding bit in register TraceAlarmStatus [1]" "0,1"
bitfld.long 0x00 0. "          [0]          ,Clear the corresponding bit in register TraceAlarmStatus [0]" "0,1"
group.long 0x24++0x03
line.long 0x00 "STATPERIOD,Probe Statistics Period"
bitfld.long 0x00 0.--4. " STATPERIOD                ,Period during which statistics are collected before being dumped automatically" "Manual mode,2 cycles,4 cycles,8 cycles,16 cycles,32 cycles,64 cycles,128 cycles,256 cycles,512 cycles,1 kilocycles,2 kilocycles,4 kilocycles,8 kilocycles,16 kilocycles,32 kilocycles,64 kilocycles,128 kilocycles,256 kilocycles,512 kilocycles,1 megacycles,2 megacycles,4 megacycles,8 megacycles,16 megacycles,32 megacycles,64 megacycles,128 megacycles,256 megacycles,512 megacycles,1 gigacycles,2 gigacycles"
wgroup.long 0x28++0x03
line.long 0x00 "STATGO,Probe Statistics Collection"
bitfld.long 0x00 0. " STATGO                    ,Generate a statistics dump" "No effect,Generate"
group.long 0x2C++0x07
line.long 0x00 "STATALARMMIN,Probe Statistics Alarm Minimum"
line.long 0x04 "STATALARMMAX,Probe Statistics Alarm Maximum"
rgroup.long 0x34++0x03
line.long 0x00 "STATALARMSTATUS,Probe Statistics Alarm Status"
bitfld.long 0x00 0. " STATALARMSTATUS           ,At least one statistics counter has exceeded the programmed values for registers StatAlarmMin or StatAlarmMax" "Not exceeded,Exceeded"
wgroup.long 0x38++0x03
line.long 0x00 "STATALARMCLR,Probe Statistics Alarm Clear"
bitfld.long 0x00 0. " STATALARMCLR              ,StatAlarmStatus register bit clear" "No effect,Clear"
group.long 0x3C++0x03
line.long 0x00 "STATALARMEN,Probe Statistics Alarm Enable"
bitfld.long 0x00 0. " STATALARMEN               ,StatAlarm enable" "Disabled,Enabled"
newline
group.long 0x44++0x2B "FILTERS_0 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 0 Route ID Base"
hexmask.long.tbyte 0x00 0.--22. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 0 Route ID Mask"
bitfld.long 0x04 22. " ROUTEIDMASK[22] ,Mask bit for RouteIdBase[22]" "0,1"
bitfld.long 0x04 21. "       [21] ,Mask bit for RouteIdBase[21]" "0,1"
bitfld.long 0x04 20. "  [20] ,Mask bit for RouteIdBase[20]" "0,1"
bitfld.long 0x04 19. "  [19] ,Mask bit for RouteIdBase[19]" "0,1"
newline
bitfld.long 0x04 18. " [18]            ,Mask bit for RouteIdBase[18]" "0,1"
bitfld.long 0x04 17. "       [17] ,Mask bit for RouteIdBase[17]" "0,1"
bitfld.long 0x04 16. "  [16] ,Mask bit for RouteIdBase[16]" "0,1"
bitfld.long 0x04 15. "  [15] ,Mask bit for RouteIdBase[15]" "0,1"
newline
bitfld.long 0x04 14. " [14]            ,Mask bit for RouteIdBase[14]" "0,1"
bitfld.long 0x04 13. "       [13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "  [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
newline
bitfld.long 0x04 10. " [10]            ,Mask bit for RouteIdBase[10]" "0,1"
bitfld.long 0x04 9. "       [9]  ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "  [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
newline
bitfld.long 0x04 6. " [6]             ,Mask bit for RouteIdBase[6]" "0,1"
bitfld.long 0x04 5. "       [5]  ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "  [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
newline
bitfld.long 0x04 2. " [2]             ,Mask bit for RouteIdBase[2]" "0,1"
bitfld.long 0x04 1. "       [1]  ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "  [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 0 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 0 Address Base High"
hexmask.long.byte 0x0C 0.--7. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 0 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 0 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 0 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 0 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 0 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 0 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 0 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long 0x80++0x2B "FILTERS_1 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 1 Route ID Base"
hexmask.long.tbyte 0x00 0.--22. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 1 Route ID Mask"
bitfld.long 0x04 22. " ROUTEIDMASK[22] ,Mask bit for RouteIdBase[22]" "0,1"
bitfld.long 0x04 21. "       [21] ,Mask bit for RouteIdBase[21]" "0,1"
bitfld.long 0x04 20. "  [20] ,Mask bit for RouteIdBase[20]" "0,1"
bitfld.long 0x04 19. "  [19] ,Mask bit for RouteIdBase[19]" "0,1"
newline
bitfld.long 0x04 18. " [18]            ,Mask bit for RouteIdBase[18]" "0,1"
bitfld.long 0x04 17. "       [17] ,Mask bit for RouteIdBase[17]" "0,1"
bitfld.long 0x04 16. "  [16] ,Mask bit for RouteIdBase[16]" "0,1"
bitfld.long 0x04 15. "  [15] ,Mask bit for RouteIdBase[15]" "0,1"
newline
bitfld.long 0x04 14. " [14]            ,Mask bit for RouteIdBase[14]" "0,1"
bitfld.long 0x04 13. "       [13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "  [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
newline
bitfld.long 0x04 10. " [10]            ,Mask bit for RouteIdBase[10]" "0,1"
bitfld.long 0x04 9. "       [9]  ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "  [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
newline
bitfld.long 0x04 6. " [6]             ,Mask bit for RouteIdBase[6]" "0,1"
bitfld.long 0x04 5. "       [5]  ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "  [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
newline
bitfld.long 0x04 2. " [2]             ,Mask bit for RouteIdBase[2]" "0,1"
bitfld.long 0x04 1. "       [1]  ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "  [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 1 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 1 Address Base High"
hexmask.long.byte 0x0C 0.--7. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 1 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 1 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 1 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 1 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 1 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 1 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 1 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long (0x134+0x04)++0x07 "COUNTERS_0 Registers"
line.long 0x00 "SRC,Probe Counter 0 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 0 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_0_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x134+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 0 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_0_VAL       ,Statistics counter value"
group.long (0x148+0x04)++0x07 "COUNTERS_1 Registers"
line.long 0x00 "SRC,Probe Counter 1 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 1 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_1_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x148+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 1 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_1_VAL       ,Statistics counter value"
group.long (0x15C+0x04)++0x07 "COUNTERS_2 Registers"
line.long 0x00 "SRC,Probe Counter 2 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 2 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_2_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x15C+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 2 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_2_VAL       ,Statistics counter value"
group.long (0x170+0x04)++0x07 "COUNTERS_3 Registers"
line.long 0x00 "SRC,Probe Counter 3 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 3 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_3_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x170+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 3 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_3_VAL       ,Statistics counter value"
width 0x0B
tree.end
tree "EMAC Probe"
base ad:0xFFD22800
width 18.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,Probe Core ID"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM              ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "          CORETYPEID    ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,Probe Revision ID"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID                 ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "          USERID        ,User defined value"
group.long 0x08++0x07
line.long 0x00 "MAINCTL,Probe MainCtl"
bitfld.long 0x00 7. " FILTBYTEALWAYSCHAINABLEEN ,Filter mapping selection" "All,Even"
rbitfld.long 0x00 6. "            INTRUSIVEMODE ,Intrusive flow-control mode" "Overflow,Intrusive"
bitfld.long 0x00 5. "  STATCONDDUMP ,The dump of a statistics frame to the range of counter values enable" "Disabled,Enabled"
bitfld.long 0x00 4. "  ALARMEN ,Collect alarm-related information enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " STATEN                    ,Statistics profiling enable" "Disabled,Enabled"
bitfld.long 0x00 2. "        PAYLOADEN     ,Traces to contain headers and payload enable" "Disabled,Enabled"
bitfld.long 0x00 1. "   TRACEEN      ,Send filtered packets on the ObsTx observation output enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  ERREN   ,Send on the ObsTx output any packet with Error status independently enable" "Disabled,Enabled"
line.long 0x04 "CFGCTL,Probe Configuration Control"
rbitfld.long 0x04 1. " ACTIVE                    ,Active" "Not active,Active"
bitfld.long 0x04 0. "      GLOBALEN      ,Global enable" "Disabled,Enabled"
group.long 0x14++0x07
line.long 0x00 "FILTERLUT,Probe Filter Look-Up Table"
bitfld.long 0x00 0.--3. " FILTERLUT                 ,Look-up table" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "TRACEALARMEN,Probe Trace Alarm Enable"
bitfld.long 0x04 2. " TRACEALARMEN[2]           ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [2]" "0,1"
bitfld.long 0x04 1. "               [1]           ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [1]" "0,1"
bitfld.long 0x04 0. "          [0]          ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [0]" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "TRACEALARMSTATUS,Probe Trace Alarm Status"
bitfld.long 0x00 2. " TRACEALARMSTATUS[2]       ,Indicates which lookup table or filter has been matched by a packet[2]" "0,1"
bitfld.long 0x00 2. "               [1]           ,Indicates which lookup table or filter has been matched by a packet[1]" "0,1"
bitfld.long 0x00 2. "          [0]          ,Indicates which lookup table or filter has been matched by a packet[0]" "0,1"
wgroup.long 0x20++0x03
line.long 0x00 "TRACEALARMCLR,Probe Trace Alarm Clear"
bitfld.long 0x00 2. " TRACEALARMCLR[2]          ,Clear the corresponding bit in register TraceAlarmStatus [2]" "0,1"
bitfld.long 0x00 1. "               [1]           ,Clear the corresponding bit in register TraceAlarmStatus [1]" "0,1"
bitfld.long 0x00 0. "          [0]          ,Clear the corresponding bit in register TraceAlarmStatus [0]" "0,1"
group.long 0x24++0x03
line.long 0x00 "STATPERIOD,Probe Statistics Period"
bitfld.long 0x00 0.--4. " STATPERIOD                ,Period during which statistics are collected before being dumped automatically" "Manual mode,2 cycles,4 cycles,8 cycles,16 cycles,32 cycles,64 cycles,128 cycles,256 cycles,512 cycles,1 kilocycles,2 kilocycles,4 kilocycles,8 kilocycles,16 kilocycles,32 kilocycles,64 kilocycles,128 kilocycles,256 kilocycles,512 kilocycles,1 megacycles,2 megacycles,4 megacycles,8 megacycles,16 megacycles,32 megacycles,64 megacycles,128 megacycles,256 megacycles,512 megacycles,1 gigacycles,2 gigacycles"
wgroup.long 0x28++0x03
line.long 0x00 "STATGO,Probe Statistics Collection"
bitfld.long 0x00 0. " STATGO                    ,Generate a statistics dump" "No effect,Generate"
group.long 0x2C++0x07
line.long 0x00 "STATALARMMIN,Probe Statistics Alarm Minimum"
line.long 0x04 "STATALARMMAX,Probe Statistics Alarm Maximum"
rgroup.long 0x34++0x03
line.long 0x00 "STATALARMSTATUS,Probe Statistics Alarm Status"
bitfld.long 0x00 0. " STATALARMSTATUS           ,At least one statistics counter has exceeded the programmed values for registers StatAlarmMin or StatAlarmMax" "Not exceeded,Exceeded"
wgroup.long 0x38++0x03
line.long 0x00 "STATALARMCLR,Probe Statistics Alarm Clear"
bitfld.long 0x00 0. " STATALARMCLR              ,StatAlarmStatus register bit clear" "No effect,Clear"
group.long 0x3C++0x03
line.long 0x00 "STATALARMEN,Probe Statistics Alarm Enable"
bitfld.long 0x00 0. " STATALARMEN               ,StatAlarm enable" "Disabled,Enabled"
newline
group.long 0x44++0x2B "FILTERS_0 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 0 Route ID Base"
hexmask.long.tbyte 0x00 0.--22. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 0 Route ID Mask"
bitfld.long 0x04 22. " ROUTEIDMASK[22] ,Mask bit for RouteIdBase[22]" "0,1"
bitfld.long 0x04 21. "       [21] ,Mask bit for RouteIdBase[21]" "0,1"
bitfld.long 0x04 20. "  [20] ,Mask bit for RouteIdBase[20]" "0,1"
bitfld.long 0x04 19. "  [19] ,Mask bit for RouteIdBase[19]" "0,1"
newline
bitfld.long 0x04 18. " [18]            ,Mask bit for RouteIdBase[18]" "0,1"
bitfld.long 0x04 17. "       [17] ,Mask bit for RouteIdBase[17]" "0,1"
bitfld.long 0x04 16. "  [16] ,Mask bit for RouteIdBase[16]" "0,1"
bitfld.long 0x04 15. "  [15] ,Mask bit for RouteIdBase[15]" "0,1"
newline
bitfld.long 0x04 14. " [14]            ,Mask bit for RouteIdBase[14]" "0,1"
bitfld.long 0x04 13. "       [13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "  [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
newline
bitfld.long 0x04 10. " [10]            ,Mask bit for RouteIdBase[10]" "0,1"
bitfld.long 0x04 9. "       [9]  ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "  [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
newline
bitfld.long 0x04 6. " [6]             ,Mask bit for RouteIdBase[6]" "0,1"
bitfld.long 0x04 5. "       [5]  ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "  [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
newline
bitfld.long 0x04 2. " [2]             ,Mask bit for RouteIdBase[2]" "0,1"
bitfld.long 0x04 1. "       [1]  ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "  [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 0 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 0 Address Base High"
hexmask.long.byte 0x0C 0.--7. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 0 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 0 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 0 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 0 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 0 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 0 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 0 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long 0x80++0x2B "FILTERS_1 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 1 Route ID Base"
hexmask.long.tbyte 0x00 0.--22. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 1 Route ID Mask"
bitfld.long 0x04 22. " ROUTEIDMASK[22] ,Mask bit for RouteIdBase[22]" "0,1"
bitfld.long 0x04 21. "       [21] ,Mask bit for RouteIdBase[21]" "0,1"
bitfld.long 0x04 20. "  [20] ,Mask bit for RouteIdBase[20]" "0,1"
bitfld.long 0x04 19. "  [19] ,Mask bit for RouteIdBase[19]" "0,1"
newline
bitfld.long 0x04 18. " [18]            ,Mask bit for RouteIdBase[18]" "0,1"
bitfld.long 0x04 17. "       [17] ,Mask bit for RouteIdBase[17]" "0,1"
bitfld.long 0x04 16. "  [16] ,Mask bit for RouteIdBase[16]" "0,1"
bitfld.long 0x04 15. "  [15] ,Mask bit for RouteIdBase[15]" "0,1"
newline
bitfld.long 0x04 14. " [14]            ,Mask bit for RouteIdBase[14]" "0,1"
bitfld.long 0x04 13. "       [13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "  [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
newline
bitfld.long 0x04 10. " [10]            ,Mask bit for RouteIdBase[10]" "0,1"
bitfld.long 0x04 9. "       [9]  ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "  [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
newline
bitfld.long 0x04 6. " [6]             ,Mask bit for RouteIdBase[6]" "0,1"
bitfld.long 0x04 5. "       [5]  ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "  [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
newline
bitfld.long 0x04 2. " [2]             ,Mask bit for RouteIdBase[2]" "0,1"
bitfld.long 0x04 1. "       [1]  ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "  [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 1 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 1 Address Base High"
hexmask.long.byte 0x0C 0.--7. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 1 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 1 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 1 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 1 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 1 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 1 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 1 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long (0x134+0x04)++0x07 "COUNTERS_0 Registers"
line.long 0x00 "SRC,Probe Counter 0 Source"
bitfld.long 0x00 5. " EXTEVENT              ,External packet event" "0,1"
newline
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 0 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_0_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x134+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 0 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_0_VAL       ,Statistics counter value"
group.long (0x148+0x04)++0x07 "COUNTERS_1 Registers"
line.long 0x00 "SRC,Probe Counter 1 Source"
bitfld.long 0x00 5. " EXTEVENT              ,External packet event" "0,1"
newline
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 1 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_1_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x148+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 1 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_1_VAL       ,Statistics counter value"
group.long (0x15C+0x04)++0x07 "COUNTERS_2 Registers"
line.long 0x00 "SRC,Probe Counter 2 Source"
bitfld.long 0x00 5. " EXTEVENT              ,External packet event" "0,1"
newline
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 2 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_2_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x15C+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 2 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_2_VAL       ,Statistics counter value"
group.long (0x170+0x04)++0x07 "COUNTERS_3 Registers"
line.long 0x00 "SRC,Probe Counter 3 Source"
bitfld.long 0x00 5. " EXTEVENT              ,External packet event" "0,1"
newline
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 3 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_3_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x170+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 3 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_3_VAL       ,Statistics counter value"
width 0x0B
tree.end
tree "SOC2FPGA Probe"
base ad:0xFFD22C00
width 18.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,Probe Core ID"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM              ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "          CORETYPEID    ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,Probe Revision ID"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID                 ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "          USERID        ,User defined value"
group.long 0x08++0x07
line.long 0x00 "MAINCTL,Probe MainCtl"
bitfld.long 0x00 7. " FILTBYTEALWAYSCHAINABLEEN ,Filter mapping selection" "All,Even"
rbitfld.long 0x00 6. "            INTRUSIVEMODE ,Intrusive flow-control mode" "Overflow,Intrusive"
bitfld.long 0x00 5. "  STATCONDDUMP ,The dump of a statistics frame to the range of counter values enable" "Disabled,Enabled"
bitfld.long 0x00 4. "  ALARMEN ,Collect alarm-related information enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. " STATEN                    ,Statistics profiling enable" "Disabled,Enabled"
bitfld.long 0x00 2. "        PAYLOADEN     ,Traces to contain headers and payload enable" "Disabled,Enabled"
bitfld.long 0x00 1. "   TRACEEN      ,Send filtered packets on the ObsTx observation output enable" "Disabled,Enabled"
bitfld.long 0x00 0. "  ERREN   ,Send on the ObsTx output any packet with Error status independently enable" "Disabled,Enabled"
line.long 0x04 "CFGCTL,Probe Configuration Control"
rbitfld.long 0x04 1. " ACTIVE                    ,Active" "Not active,Active"
bitfld.long 0x04 0. "      GLOBALEN      ,Global enable" "Disabled,Enabled"
group.long 0x10++0x03
line.long 0x00 "TRACEPORTSEL,Probe Trace Port Select"
bitfld.long 0x00 0. " TRACEPORTSEL              ,Generic protocol link which is currently being observed by trace logic" "0,1"
group.long 0x14++0x07
line.long 0x00 "FILTERLUT,Probe Filter Look-Up Table"
bitfld.long 0x00 0.--3. " FILTERLUT                 ,Look-up table" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "TRACEALARMEN,Probe Trace Alarm Enable"
bitfld.long 0x04 2. " TRACEALARMEN[2]           ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [2]" "0,1"
bitfld.long 0x04 1. "               [1]           ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [1]" "0,1"
bitfld.long 0x04 0. "          [0]          ,Controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set [0]" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "TRACEALARMSTATUS,Probe Trace Alarm Status"
bitfld.long 0x00 2. " TRACEALARMSTATUS[2]       ,Indicates which lookup table or filter has been matched by a packet[2]" "0,1"
bitfld.long 0x00 2. "               [1]           ,Indicates which lookup table or filter has been matched by a packet[1]" "0,1"
bitfld.long 0x00 2. "          [0]          ,Indicates which lookup table or filter has been matched by a packet[0]" "0,1"
wgroup.long 0x20++0x03
line.long 0x00 "TRACEALARMCLR,Probe Trace Alarm Clear"
bitfld.long 0x00 2. " TRACEALARMCLR[2]          ,Clear the corresponding bit in register TraceAlarmStatus [2]" "0,1"
bitfld.long 0x00 1. "               [1]           ,Clear the corresponding bit in register TraceAlarmStatus [1]" "0,1"
bitfld.long 0x00 0. "          [0]          ,Clear the corresponding bit in register TraceAlarmStatus [0]" "0,1"
group.long 0x24++0x03
line.long 0x00 "STATPERIOD,Probe Statistics Period"
bitfld.long 0x00 0.--4. " STATPERIOD                ,Period during which statistics are collected before being dumped automatically" "Manual mode,2 cycles,4 cycles,8 cycles,16 cycles,32 cycles,64 cycles,128 cycles,256 cycles,512 cycles,1 kilocycles,2 kilocycles,4 kilocycles,8 kilocycles,16 kilocycles,32 kilocycles,64 kilocycles,128 kilocycles,256 kilocycles,512 kilocycles,1 megacycles,2 megacycles,4 megacycles,8 megacycles,16 megacycles,32 megacycles,64 megacycles,128 megacycles,256 megacycles,512 megacycles,1 gigacycles,2 gigacycles"
wgroup.long 0x28++0x03
line.long 0x00 "STATGO,Probe Statistics Collection"
bitfld.long 0x00 0. " STATGO                    ,Generate a statistics dump" "No effect,Generate"
group.long 0x2C++0x07
line.long 0x00 "STATALARMMIN,Probe Statistics Alarm Minimum"
line.long 0x04 "STATALARMMAX,Probe Statistics Alarm Maximum"
rgroup.long 0x34++0x03
line.long 0x00 "STATALARMSTATUS,Probe Statistics Alarm Status"
bitfld.long 0x00 0. " STATALARMSTATUS           ,At least one statistics counter has exceeded the programmed values for registers StatAlarmMin or StatAlarmMax" "Not exceeded,Exceeded"
wgroup.long 0x38++0x03
line.long 0x00 "STATALARMCLR,Probe Statistics Alarm Clear"
bitfld.long 0x00 0. " STATALARMCLR              ,StatAlarmStatus register bit clear" "No effect,Clear"
group.long 0x3C++0x03
line.long 0x00 "STATALARMEN,Probe Statistics Alarm Enable"
bitfld.long 0x00 0. " STATALARMEN               ,StatAlarm enable" "Disabled,Enabled"
newline
group.long 0x44++0x2B "FILTERS_0 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 0 Route ID Base"
hexmask.long.tbyte 0x00 0.--22. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 0 Route ID Mask"
bitfld.long 0x04 22. " ROUTEIDMASK[22] ,Mask bit for RouteIdBase[22]" "0,1"
bitfld.long 0x04 21. "       [21] ,Mask bit for RouteIdBase[21]" "0,1"
bitfld.long 0x04 20. "  [20] ,Mask bit for RouteIdBase[20]" "0,1"
bitfld.long 0x04 19. "  [19] ,Mask bit for RouteIdBase[19]" "0,1"
newline
bitfld.long 0x04 18. " [18]            ,Mask bit for RouteIdBase[18]" "0,1"
bitfld.long 0x04 17. "       [17] ,Mask bit for RouteIdBase[17]" "0,1"
bitfld.long 0x04 16. "  [16] ,Mask bit for RouteIdBase[16]" "0,1"
bitfld.long 0x04 15. "  [15] ,Mask bit for RouteIdBase[15]" "0,1"
newline
bitfld.long 0x04 14. " [14]            ,Mask bit for RouteIdBase[14]" "0,1"
bitfld.long 0x04 13. "       [13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "  [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
newline
bitfld.long 0x04 10. " [10]            ,Mask bit for RouteIdBase[10]" "0,1"
bitfld.long 0x04 9. "       [9]  ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "  [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
newline
bitfld.long 0x04 6. " [6]             ,Mask bit for RouteIdBase[6]" "0,1"
bitfld.long 0x04 5. "       [5]  ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "  [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
newline
bitfld.long 0x04 2. " [2]             ,Mask bit for RouteIdBase[2]" "0,1"
bitfld.long 0x04 1. "       [1]  ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "  [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 0 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 0 Address Base High"
hexmask.long.byte 0x0C 0.--7. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 0 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 0 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 0 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 0 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 0 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 0 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 0 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long 0x80++0x2B "FILTERS_1 Registers"
line.long 0x00 "ROUTEIDBASE,Probe Filter 1 Route ID Base"
hexmask.long.tbyte 0x00 0.--22. 1. " ROUTEIDBASE     ,RouteId-lsbFilterRouteId bits base used to filter packets"
line.long 0x04 "ROUTEIDMASK,Probe Filter 1 Route ID Mask"
bitfld.long 0x04 22. " ROUTEIDMASK[22] ,Mask bit for RouteIdBase[22]" "0,1"
bitfld.long 0x04 21. "       [21] ,Mask bit for RouteIdBase[21]" "0,1"
bitfld.long 0x04 20. "  [20] ,Mask bit for RouteIdBase[20]" "0,1"
bitfld.long 0x04 19. "  [19] ,Mask bit for RouteIdBase[19]" "0,1"
newline
bitfld.long 0x04 18. " [18]            ,Mask bit for RouteIdBase[18]" "0,1"
bitfld.long 0x04 17. "       [17] ,Mask bit for RouteIdBase[17]" "0,1"
bitfld.long 0x04 16. "  [16] ,Mask bit for RouteIdBase[16]" "0,1"
bitfld.long 0x04 15. "  [15] ,Mask bit for RouteIdBase[15]" "0,1"
newline
bitfld.long 0x04 14. " [14]            ,Mask bit for RouteIdBase[14]" "0,1"
bitfld.long 0x04 13. "       [13] ,Mask bit for RouteIdBase[13]" "0,1"
bitfld.long 0x04 12. "  [12] ,Mask bit for RouteIdBase[12]" "0,1"
bitfld.long 0x04 11. "  [11] ,Mask bit for RouteIdBase[11]" "0,1"
newline
bitfld.long 0x04 10. " [10]            ,Mask bit for RouteIdBase[10]" "0,1"
bitfld.long 0x04 9. "       [9]  ,Mask bit for RouteIdBase[9]" "0,1"
bitfld.long 0x04 8. "  [8]  ,Mask bit for RouteIdBase[8]" "0,1"
bitfld.long 0x04 7. "  [7]  ,Mask bit for RouteIdBase[7]" "0,1"
newline
bitfld.long 0x04 6. " [6]             ,Mask bit for RouteIdBase[6]" "0,1"
bitfld.long 0x04 5. "       [5]  ,Mask bit for RouteIdBase[5]" "0,1"
bitfld.long 0x04 4. "  [4]  ,Mask bit for RouteIdBase[4]" "0,1"
bitfld.long 0x04 3. "  [3]  ,Mask bit for RouteIdBase[3]" "0,1"
newline
bitfld.long 0x04 2. " [2]             ,Mask bit for RouteIdBase[2]" "0,1"
bitfld.long 0x04 1. "       [1]  ,Mask bit for RouteIdBase[1]" "0,1"
bitfld.long 0x04 0. "  [0]  ,Mask bit for RouteIdBase[0]" "0,1"
newline
line.long 0x08 "ADDRBASE_LOW,Probe Filter 1 Address Base Low"
line.long 0x0C "ADDRBASE_HIGH,Probe Filter 1 Address Base High"
hexmask.long.byte 0x0C 0.--7. 0x01 " ADDRBASE_HIGH   ,Address MSB"
line.long 0x10 "WINDOWSIZE,Probe Filter 1 Window Size"
bitfld.long 0x10 0.--5. " WINDOWSIZE      ,Encoded address mask used to filter packets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "SECURITYBASE,Probe Filter 1 Security Base"
bitfld.long 0x14 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x18 "SECURITYMASK,Probe Filter 1 Security Mask"
bitfld.long 0x18 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x18 0. "             [0]    ,Mask bit for SecurityBase[0]" "0,1"
line.long 0x1C "OPCODE,Probe Filter 1 Opcode"
bitfld.long 0x1C 3. " URGEN           ,URG packets select" "Not selected,Selected"
bitfld.long 0x1C 2. "  LOCKEN ,RDX-WR / RDL / WRC and linked sequence select" "Not selected,Selected"
bitfld.long 0x1C 1. "  WREN ,WR packets select" "Not selected,Selected"
bitfld.long 0x1C 0. "  RDEN ,RD packets select" "Not selected,Selected"
line.long 0x20 "STATUS,Probe Filter 1 Status"
bitfld.long 0x20 1. " RSPEN           ,RSP and Fail-cont status packets select" "0,1"
bitfld.long 0x20 0. "             REQEN  ,REQ status packets enable" "0,1"
line.long 0x24 "LENGTH,Probe Filter 1 Length"
bitfld.long 0x24 0.--3. " LENGTH          ,Selects candidate packets if their number of bytes is less than or equal to 2**Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x28 "URGENCY,Probe Filter 1 Urgency"
bitfld.long 0x28 0.--1. " URGENCY         ,Minimum urgency level used to filter packets" "0,1,2,3"
newline
group.long 0x134++0x03
line.long 0x00 "PORTSEL,Probe Counter 0 Port Select"
bitfld.long 0x00 0. " COUNTERS_0_PORTSEL   ,NTTP link which is associated with the counter" "0,1"
group.long (0x134+0x04)++0x07 "COUNTERS_0 Registers"
line.long 0x00 "SRC,Probe Counter 0 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 0 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_0_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x134+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 0 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_0_VAL       ,Statistics counter value"
group.long 0x148++0x03
line.long 0x00 "PORTSEL,Probe Counter 1 Port Select"
bitfld.long 0x00 0. " COUNTERS_1_PORTSEL   ,NTTP link which is associated with the counter" "0,1"
group.long (0x148+0x04)++0x07 "COUNTERS_1 Registers"
line.long 0x00 "SRC,Probe Counter 1 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 1 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_1_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x148+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 1 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_1_VAL       ,Statistics counter value"
group.long 0x15C++0x03
line.long 0x00 "PORTSEL,Probe Counter 2 Port Select"
bitfld.long 0x00 0. " COUNTERS_2_PORTSEL   ,NTTP link which is associated with the counter" "0,1"
group.long (0x15C+0x04)++0x07 "COUNTERS_2 Registers"
line.long 0x00 "SRC,Probe Counter 2 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 2 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_2_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x15C+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 2 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_2_VAL       ,Statistics counter value"
group.long 0x170++0x03
line.long 0x00 "PORTSEL,Probe Counter 3 Port Select"
bitfld.long 0x00 0. " COUNTERS_3_PORTSEL   ,NTTP link which is associated with the counter" "0,1"
group.long (0x170+0x04)++0x07 "COUNTERS_3 Registers"
line.long 0x00 "SRC,Probe Counter 3 Source"
bitfld.long 0x00 0.--4. " INTEVENT             ,Internal packet event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "ALARMMODE,Probe Counter 3 Alarm Mode"
bitfld.long 0x04 0.--1. " COUNTERS_3_ALARMMODE ,Statistics-alarm behavior of the counter" "0,1,2,3"
rgroup.long (0x170+0x0C)++0x03
line.long 0x00 "VAL,Probe Counter 3 Value"
hexmask.long.word 0x00 0.--15. 1. " COUNTERS_3_VAL       ,Statistics counter value"
width 0x0B
tree.end
tree "EMAC Probe Transaction Statistics Profiler"
base ad:0xFFD23000
width 18.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,EMAC Probe Transaction Statistics Profiler Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM     ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "           CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,EMAC Probe Transaction Statistics Profiler Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID        ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "           USERID     ,User defined value"
group.long 0x08++0x07
line.long 0x00 "EN,EMAC Probe Transaction Statistics Profiler Enable Register"
bitfld.long 0x00 0. " EN               ,Transaction probe counter unit enable" "Disabled,Enabled"
line.long 0x04 "MODE,EMAC Probe Transaction Statistics Profiler Mode Register"
bitfld.long 0x04 0. " MODE             ,Counting mode per observed port" "Delay,Pending"
group.long 0x2C++0x03
line.long 0x00 "THRESHOLDS_0_0,EMAC Probe Transaction Statistics Profiler Thresholds_0_0 Register"
bitfld.long 0x00 0.--1. " THRESHOLDS_0_0   ,The threshold index 0 that allows computation of threshold values" "0,1,2,3"
group.long 0x30++0x03
line.long 0x00 "THRESHOLDS_0_1,EMAC Probe Transaction Statistics Profiler Thresholds_0_1 Register"
bitfld.long 0x00 0.--1. " THRESHOLDS_0_1   ,The threshold index 1 that allows computation of threshold values" "0,1,2,3"
group.long 0x34++0x03
line.long 0x00 "THRESHOLDS_0_2,EMAC Probe Transaction Statistics Profiler Thresholds_0_2 Register"
bitfld.long 0x00 0.--1. " THRESHOLDS_0_2   ,The threshold index 2 that allows computation of threshold values" "0,1,2,3"
rgroup.long 0x6C++0x03
line.long 0x00 "OVERFLOWSTATUS,EMAC Probe Transaction Statistics Profiler Overflow Status Register"
bitfld.long 0x00 0. " OVERFLOWSTATUS   ,Overflow status" "No overflow,Overflow"
group.long 0x70++0x0B
line.long 0x00 "OVERFLOWRESET,EMAC Probe Transaction Statistics Profiler Overflow Reset Register"
bitfld.long 0x00 0. " OVERFLOWRESET    ,Clear overflow status bits per observed port on each write access" "Not cleared,Cleared"
line.long 0x04 "PENDINGEVENTMODE,EMAC Probe Transaction Statistics Profiler Pending Event Mode Register"
bitfld.long 0x04 0. " PENDINGEVENTMODE ,Configure the pending event mode" "Cycle,Stop"
line.long 0x08 "PRESCALER,EMAC Probe Transaction Statistics Profiler PreScalar Register"
hexmask.long.byte 0x08 0.--7. 1. " PRESCALER        ,Pre-scaling value"
width 0x0B
tree.end
tree "CCU IOS QoS Generator"
base ad:0xFFD24000
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--11. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "DMA TBU QoS Generator"
base ad:0xFFD24080
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--11. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "EMAC TBU QoS Generator"
base ad:0xFFD24100
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--11. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "IO TBU QoS Generator"
base ad:0xFFD24180
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--11. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "SDM TBU QoS Generator"
base ad:0xFFD24200
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,QoS Generator Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "               CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,QoS Generator Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "               USERID     ,User defined value"
group.long 0x08++0x13
line.long 0x00 "PRIORITY,QoS Generator Priority Register"
rbitfld.long 0x00 31. " MARK         ,Backward compatibility marker" "0,1"
bitfld.long 0x00 8.--9. "                    P1         ,Priority level for read transactions" "0,1,2,3"
bitfld.long 0x00 0.--1. "         P0          ,Priority level for write transactions" "0,1,2,3"
line.long 0x04 "MODE,QoS Generator Mode Register"
bitfld.long 0x04 0.--1. " MODE         ,Mode select" "Programmable,Bandwidth Limiter,Bypass,Bandwidth Regulator"
line.long 0x08 "BANDWIDTH,QoS Generator Bandwidth Register"
hexmask.long.word 0x08 0.--11. 1. " BANDWIDTH    ,Bandwidth threshold in units of 1/256th bytes per cycle"
line.long 0x0C "SATURATION,QoS Generator Saturation Register"
hexmask.long.word 0x0C 0.--9. 1. " SATURATION   ,The maximum data count value in units of 16 bytes"
line.long 0x10 "EXTCONTROL,QoS Generator External Inputs Control Register"
bitfld.long 0x10 2. " INTCLKEN     ,INTCLK enable" "Disabled,Enabled"
bitfld.long 0x10 1. "             EXTTHREN   ,EXTTHR enable" "Disabled,Enabled"
bitfld.long 0x10 0. "  SOCKETQOSEN ,SOCKETQOS enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "EMAC TBU Transaction Statistics Filter"
base ad:0xFFD24400
width 16.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,EMAC TBU Transaction Statistics Filter Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM    ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "     CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,EMAC TBU Transaction Statistics Filter Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID       ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "     USERID     ,User defined value"
group.long 0x08++0x0F
line.long 0x00 "MODE,EMAC TBU Transaction Statistics Filter Mode Register"
bitfld.long 0x00 0. " MODE            ,Filtering mode" "Handshake,Latency"
line.long 0x04 "ADDRBASE_LOW,EMAC TBU Transaction Statistics Filter Address Base Low Register"
line.long 0x08 "ADDRBASE_HIGH,EMAC TBU Transaction Statistics Filter Address Base High Register"
hexmask.long.word 0x08 0.--8. 0x01 " ADDRBASE_HIGH   ,Address base MSB register"
line.long 0x0C "ADDRWINDOWSIZE,EMAC TBU Transaction Statistics Filter Address Window Size Register"
bitfld.long 0x0C 5. " ADDRWINDOWSIZE  ,Encoded address mask used to filter packets [5]" "0,1"
bitfld.long 0x0C 4. ",Encoded address mask used to filter packets [4]" "0,1"
bitfld.long 0x0C 3. ",Encoded address mask used to filter packets [3]" "0,1"
bitfld.long 0x0C 2. ",Encoded address mask used to filter packets [2]" "0,1"
bitfld.long 0x0C 1. ",Encoded address mask used to filter packets [1]" "0,1"
bitfld.long 0x0C 0. ",Encoded address mask used to filter packets [0]" "0,1"
group.long 0x20++0x13
line.long 0x00 "OPCODE,EMAC TBU Transaction Statistics Filter Opcode Register"
bitfld.long 0x00 1. " WREN            ,WR request enable" "Disabled,Enabled"
bitfld.long 0x00 0. "   RDEN       ,RD request enable" "Disabled,Enabled"
line.long 0x04 "USERBASE,EMAC TBU Transaction Statistics Filter User Base Register"
hexmask.long 0x04 0.--28. 0x01 " USERBASE        ,User base used to filter requests"
line.long 0x08 "USERMASK,EMAC TBU Transaction Statistics Filter User Mask Register"
bitfld.long 0x08 28. " USERMASK[28]    ,User mask bit 28 used to filter requests" "0,1"
bitfld.long 0x08 27. "          [27]       ,User mask bit 27 used to filter requests" "0,1"
bitfld.long 0x08 26. "         [26] ,User mask bit 26 used to filter requests" "0,1"
bitfld.long 0x08 25. "  [25] ,User mask bit 25 used to filter requests" "0,1"
newline
bitfld.long 0x08 24. " [24]            ,User mask bit 24 used to filter requests" "0,1"
bitfld.long 0x08 23. "          [23]       ,User mask bit 23 used to filter requests" "0,1"
bitfld.long 0x08 22. "         [22] ,User mask bit 22 used to filter requests" "0,1"
bitfld.long 0x08 21. "  [21] ,User mask bit 21 used to filter requests" "0,1"
newline
bitfld.long 0x08 20. " [20]            ,User mask bit 20 used to filter requests" "0,1"
bitfld.long 0x08 19. "          [19]       ,User mask bit 19 used to filter requests" "0,1"
bitfld.long 0x08 18. "         [18] ,User mask bit 18 used to filter requests" "0,1"
bitfld.long 0x08 17. "  [17] ,User mask bit 17 used to filter requests" "0,1"
newline
bitfld.long 0x08 16. " [16]            ,User mask bit 16 used to filter requests" "0,1"
bitfld.long 0x08 15. "          [15]       ,User mask bit 15 used to filter requests" "0,1"
bitfld.long 0x08 14. "         [14] ,User mask bit 14 used to filter requests" "0,1"
bitfld.long 0x08 13. "  [13] ,User mask bit 13 used to filter requests" "0,1"
newline
bitfld.long 0x08 12. " [12]            ,User mask bit 12 used to filter requests" "0,1"
bitfld.long 0x08 11. "          [11]       ,User mask bit 11 used to filter requests" "0,1"
bitfld.long 0x08 10. "         [10] ,User mask bit 10 used to filter requests" "0,1"
bitfld.long 0x08 9. "  [9]  ,User mask bit 9 used to filter requests" "0,1"
newline
bitfld.long 0x08 8. " [8]             ,User mask bit 8 used to filter requests" "0,1"
bitfld.long 0x08 7. "          [7]        ,User mask bit 7 used to filter requests" "0,1"
bitfld.long 0x08 6. "         [6]  ,User mask bit 6 used to filter requests" "0,1"
bitfld.long 0x08 5. "  [5]  ,User mask bit 5 used to filter requests" "0,1"
newline
bitfld.long 0x08 4. " [4]             ,User mask bit 4 used to filter requests" "0,1"
bitfld.long 0x08 3. "          [3]        ,User mask bit 3 used to filter requests" "0,1"
bitfld.long 0x08 2. "         [2]  ,User mask bit 2 used to filter requests" "0,1"
newline
bitfld.long 0x08 1. " [1]             ,User mask bit 1 used to filter requests" "0,1"
bitfld.long 0x08 0. "          [0]        ,User mask bit 0 used to filter requests" "0,1"
line.long 0x0C "SECURITYBASE,EMAC TBU Transaction Statistics Security Base Register"
bitfld.long 0x0C 0.--1. " SECURITYBASE    ,Security base used to filter packets" "0,1,2,3"
line.long 0x10 "SECURITYMASK,Probe Filter Security Mask Register"
bitfld.long 0x10 1. " SECURITYMASK[1] ,Mask bit for SecurityBase[1]" "0,1"
bitfld.long 0x10 0. "          [0]        ,Mask bit for SecurityBase[0]" "0,1"
width 0x0B
tree.end
tree "Privilege"
base ad:0xFFD24800
width 14.
group.long 0x00++0x03
line.long 0x00 "PRIV_SET/CLR,Privilege Set/Clear Register"
setclrfld.long 0x00 31. 0x04 31. 0x08 31. " TCU           ,Non-privilege transactions for TCU to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x04 30. 0x08 30. "  SOC2FPGA      ,Non-privilege transactions for SOC2FPGA to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x04 29. 0x08 29. "  LWSOC2FPGA ,Non-privilege transactions for LWSOC2FPGA to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x04 28. 0x08 28. "  UART1         ,Non-privilege transactions for UART1 to slave enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 27. 0x04 27. 0x08 27. " UART0         ,Non-privilege transactions for UART0 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x04 26. 0x08 26. "  SP_TIMER1     ,Non-privilege transactions for SP_TIMER1 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 25. 0x04 25. 0x08 25. "  SP_TIMER0  ,Non-privilege transactions for SP_TIMER0 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x04 24. 0x08 24. "  I2C4          ,Non-privilege transactions for I2C4 to slave enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 23. 0x04 23. 0x08 23. " I2C3          ,Non-privilege transactions for I2C3 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x04 22. 0x08 22. "  I2C2          ,Non-privilege transactions for I2C2 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x04 21. 0x08 21. "  I2C1       ,Non-privilege transactions for I2C1 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x04 20. 0x08 20. "  I2C0          ,Non-privilege transactions for I2C0 to slave enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 18. 0x04 18. 0x08 18. " GPIO1         ,Non-privilege transactions for GPIO1 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x04 17. 0x08 17. "  GPIO0         ,Non-privilege transactions for GPIO0 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x04 16. 0x08 16. "  SDMMC      ,Non-privilege transactions for SDMMC to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 13. 0x04 13. 0x08 13. "  EMAC2         ,Non-privilege transactions for EMAC2 to slave enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 12. 0x04 12. 0x08 12. " EMAC1         ,Non-privilege transactions for EMAC1 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x04 11. 0x08 11. "  EMAC0         ,Non-privilege transactions for EMAC0 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x04 10. 0x08 10. "  SPI_SLAVE1 ,Non-privilege transactions for SPI_SLAVE1 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x04 9. 0x08 9. "  SPI_SLAVE0    ,Non-privilege transactions for SPI_SLAVE0 to slave enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 8. 0x04 8. 0x08 8. " SPI_MASTER1   ,Non-privilege transactions for SPI_MASTER1 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 7. 0x04 7. 0x08 7. "  SPI_MASTER0   ,Non-privilege transactions for SPI_MASTER0 to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x04 6. 0x08 6. "  DMA_SECURE ,Non-privilege transactions for DMA_SECURE to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x04 5. 0x08 5. "  DMA_NONSECURE ,Non-privilege transactions for DMA_NONSECURE to slave enable" "Disabled,Enabled"
newline
setclrfld.long 0x00 4. 0x04 4. 0x08 4. " USB1_REGISTER ,Non-privilege transactions for USB1_REGISTER to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. "  USB0_REGISTER ,Non-privilege transactions for USB0_REGISTER to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "  NAND_DATA  ,Non-privilege transactions for NAND_DATA to slave enable" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "  NAND_REGISTER ,Non-privilege transactions for NAND_REGISTER to slave enable" "Disabled,Enabled"
width 0x0B
tree.end
tree "L4 Link Responder Rate Adapter"
base ad:0xFFD24C00
width 15.
rgroup.long 0x00++0x07
line.long 0x00 "ID_COREID,L4 Link Responder Rate Adapter Core ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. " CORECHECKSUM ,Checksum of the parameters of the IP"
hexmask.long.byte 0x00 0.--7. 1. "  CORETYPEID ,Identify the type of IP"
line.long 0x04 "ID_REVISIONID,L4 Link Responder Rate Adapter Revision ID Register"
hexmask.long.tbyte 0x04 8.--31. 1. " FLEXNOCID    ,Build revision of the software used to generate the IP HDL code"
hexmask.long.byte 0x04 0.--7. 1. "  USERID     ,User defined value"
group.long 0x08++0x07
line.long 0x00 "RATE,L4 Link Responder Rate Adapter Rate Register"
hexmask.long.word 0x00 0.--9. 1. " RATE         ,Ratio of outgoing to incoming throughput"
line.long 0x04 "BYPASS,L4 Link Responder Rate Adapter Bypass Register"
bitfld.long 0x04 0. " BYPASS       ,Disable the rate adaptation capability" "No,Yes"
width 0x0B
tree.end
tree.end
tree "NOC_CACHE_CLEAN (NOC Cache Clean)"
base ad:0xF9C00000
width 17.
group.long 0x00++0x03
line.long 0x00 "NOC_CACHE_CLEAN,NOC Cache Clean"
button "Data" "d (0xF9C00000+0x00)--(0xF9C00000+0x3FFFFF) /long"
width 0x0B
tree.end
tree "MBOX (Mailbox Registers)"
base ad:0xFFA30000
width 13.
group.long 0x00++0x03
line.long 0x00 "EM_MBOX,External Master Mailbox"
button "Data" "d (ad:0xFFA30000+0x00)--(ad:0xFFA30000+0xFF) /long"
group.long 0x400++0x03
line.long 0x00 "EM2SDM,External Master Mailbox To SDM Doorbell Register"
bitfld.long 0x00 0. " DOORBELL ,External master mailbox to SDM door bell" "0,1"
group.long 0x480++0x03
line.long 0x00 "SDM2EM,SDM To External Master Mailbox Doorbell Register"
bitfld.long 0x00 0. " DOORBELL ,SDM to external master mailbox door bell" "0,1"
group.long 0x1000++0x03
line.long 0x00 "MBOX_STREAM,Mailbox Stream"
button "Data" "d (ad:0xFFA30000+0x1000)--(ad:0xFFA30000+0xFFFF) /long"
width 0x0B
tree.end
newline