; --------------------------------------------------------------------------------
; @Title: STM32WLE On-Chip Peripherals
; @Props: Released
; @Author: KWI, RSA, DAB
; @Changelog: 2021-06-25 KWI
;             2022-01-28 DAB
; @Manufacturer: STM - ST Microelectronics N.V.
; @Doc: SVD generated based on STM32WLE5_CM4.svd (ver. 1.4)
; @Core: Cortex-M4F
; @Chip: STM32WLE4CC, STM32WLE4JC, STM32WLE5C8, STM32WLE5CB, STM32WLE5CC,
;        STM32WLE5J8
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: perstm32wle.per 17736 2024-04-08 09:26:07Z kwisniewski $

tree.close "Core Registers (Cortex-M4F)"
AUTOINDENT.PUSH
AUTOINDENT.OFF
tree "System Control"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 12.
group.long 0x08++0x03
line.long 0x00 "ACTLR,Auxiliary Control Register"
bitfld.long 0x00 9. " DISFPCA        ,Disables lazy stacking of floating point context" "No,Yes"
bitfld.long 0x00 8. "                   DISOOFP        ,Disables floating point instructions completing" "No,Yes"
bitfld.long 0x00 2. "              DISFOLD         ,Disables folding of IT instructions" "No,Yes"
textline "                     "
bitfld.long 0x00 1. " DISDEFWBUF     ,Disables write buffer use during default memory map accesses" "No,Yes"
bitfld.long 0x00 0. "                   DISMCYCINT     ,Disables interruption of multi-cycle instructions" "No,Yes"
group.long 0x10++0x0B
line.long 0x00 "SYST_CSR,SysTick Control and Status Register"
rbitfld.long 0x00 16. " COUNTFLAG      ,Counter Flag" "Not counted,Counted"
bitfld.long 0x00 2. "           CLKSOURCE      ,SysTick clock source" "External,Core"
bitfld.long 0x00 1. "         TICKINT         ,SysTick Handler" "No SysTick,SysTick"
textline "                     "
bitfld.long 0x00 0. " ENABLE         ,Counter Enable" "Disabled,Enabled"
line.long 0x04 "SYST_RVR,SysTick Reload Value Register"
hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD         ,The value to load into the SYST_CVR when the counter reaches 0"
line.long 0x08 "SYST_CVR,SysTick Current Value Register"
rgroup.long 0x1C++0x03
line.long 0x00 "SYST_CALIB,SysTick Calibration Value Register"
bitfld.long 0x00 31. " NOREF          ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented"
bitfld.long 0x00 30. "       SKEW           ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact"
hexmask.long.tbyte 0x00 0.--23. 1. "          TENMS           ,Holds a reload value to be used for 10ms (100Hz) timing"
rgroup.long 0xD00++0x03
line.long 0x00 "CPUID,CPU ID Base Register"
hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER    ,Implementer Code"
bitfld.long 0x00 20.--23. "                    VARIANT        ,Indicates processor revision" "Revision 0,?..."
bitfld.long 0x00 16.--19. "       ARCHITECTURE    ,Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                     "
hexmask.long.word 0x00 4.--15. 1. " PARTNO         ,Indicates part number"
bitfld.long 0x00 0.--3. "                  REVISION       ,Indicates patch release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xD04++0x23
line.long 0x00 "ICSR,Interrupt Control State Register"
bitfld.long 0x00 31. " NMIPENDSET     ,Set Pending NMI Bit" "Inactive,Active"
bitfld.long 0x00 28. "              PENDSVSET      ,Set Pending pendSV Bit" "Not pending,Pending"
bitfld.long 0x00 27. "      PENDSVCLR       ,Removes the pending status of the PendSV exception" "No effect,Removed"
textline "                     "
bitfld.long 0x00 26. " PENDSTSET      ,Set Pending SysTick Bit" "Not pending,Pending"
bitfld.long 0x00 25. "           PENDSTCLR      ,Clear Pending SysTick Bit" "No effect,Removed"
bitfld.long 0x00 23. "        ISRPREEMPT      ,Use Only at Debug Time" "Not active,Active"
textline "                     "
bitfld.long 0x00 22. " ISRPENDING     ,Indicates whether an external interrupt" "Not pending,Pending"
hexmask.long.word 0x00 12.--20. 1. "           VECTPENDING    ,Pending ISR Number Field"
bitfld.long 0x00 11. "             RETTOBASE       ,Interrupt Exception" "Active,Not active"
textline "                     "
hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE     ,The exception number of the current executing exception"
line.long 0x04 "VTOR,Vector Table Offset Register"
hexmask.long 0x04 7.--31. 0x80 " TBLOFF         ,Vector table address"
line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register"
hexmask.long.word 0x08 16.--31. 1. " VECTKEY        ,Register Key"
rbitfld.long 0x08 15. "                  ENDIANESS      ,Data endianness Bit" "Little,Big"
bitfld.long 0x08 8.--10. "           PRIGROUP        ,Interrupt Priority Grouping Field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
textline "                     "
bitfld.long 0x08 2. " SYSRESETREQ    ,System Reset Request" "Not requested,Requested"
bitfld.long 0x08 1. "         VECTCLRACTIVE  ,Clear Active Vector Bit" "No effect,Clear"
bitfld.long 0x08 0. "        VECTRESET       ,System Reset" "No effect,Reset"
line.long 0x0C "SCR,System Control Register"
bitfld.long 0x0C 4. " SEVONPEND      ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup"
bitfld.long 0x0C 2. "            SLEEPDEEP      ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep"
bitfld.long 0x0C 1. "   SLEEPONEXIT     ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled"
line.long 0x10 "CCR,Configuration Control Register"
bitfld.long 0x10 18. " BP             ,Branch prediction enable bit" "Disabled,Enabled"
bitfld.long 0x10 17. "              IC             ,Instruction cache enable bit" "Disabled,Enabled"
bitfld.long 0x10 16. "         DC              ,Cache enable bit" "Disabled,Enabled"
textline "                     "
bitfld.long 0x10 9. " STKALIGN       ,8-byte Stack Frame Alignment" "4-byte/no adjustment,8-byte/adjustment"
bitfld.long 0x10 8. "  BFHFNMIGN      ,Enable NMI and Hard Fault and FAULTMASK to Ignore Bus Fault" "Disabled,Enabled"
bitfld.long 0x10 4. "         DIV_0_TRP       ,Trap Divide by Zero" "Disabled,Enabled"
textline "                     "
bitfld.long 0x10 3. " UNALIGN_TRP    ,Trap for Unaligned Access" "Disabled,Enabled"
bitfld.long 0x10 1. "              USERSETMPEND   ,Controls whether unprivileged software can access the STIR" "Denied,Allowed"
bitfld.long 0x10 0. "          NONEBASETHRDENA ,Control Entry to Thread Mode" "Only from last exception,Any level"
line.long 0x14 "SHPR1,SSystem Handler Priority Register 1"
hexmask.long.byte 0x14 24.--31. 1. " PRI_7          ,Priority of System Handler 7"
hexmask.long.byte 0x14 16.--23. 1. "                    PRI_6          ,Priority of system handler 6(UsageFault)"
hexmask.long.byte 0x14 8.--15. 1. "               PRI_5           ,Priority of system handler 5(BusFault)"
textline "                     "
hexmask.long.byte 0x14 0.--7. 1. " PRI_4          ,Priority of system handler 4(MemManage)"
line.long 0x18 "SHPR2,System Handler Priority Register 2"
hexmask.long.byte 0x18 24.--31. 1. " PRI_11         ,Priority of system handler 11(SVCall)"
hexmask.long.byte 0x18 16.--23. 1. "                    PRI_10         ,Priority of System Handler 10"
hexmask.long.byte 0x18 8.--15. 1. "               PRI_9           ,Priority of System Handler 9"
textline "                     "
hexmask.long.byte 0x18 0.--7. 1. " PRI_8          ,Priority of System Handler 8"
line.long 0x1C "SHPR3,System Handler Priority Register 3"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_15         ,Priority of System Handler 15(SysTick)"
hexmask.long.byte 0x1C 16.--23. 1. "                    PRI_14         ,Priority of System Handler 14(PendSV)"
hexmask.long.byte 0x1C 8.--15. 1. "               PRI_13          ,Priority of System Handler 13"
textline "                     "
hexmask.long.byte 0x1C 0.--7. 1. " PRI_12         ,Priority of System Handler 12(DebugMonitor)"
line.long 0x20 "SHCSR,System Handler Control and State Register"
bitfld.long 0x20 18. " USGFAULTENA    ,Enable UsageFault" "Disabled,Enabled"
bitfld.long 0x20 17. "              BUSFAULTENA    ,Enable BusFault" "Disabled,Enabled"
bitfld.long 0x20 16. "         MEMFAULTENA     ,Enable MemManage fault" "Disabled,Enabled"
textline "                     "
bitfld.long 0x20 15. " SVCALLPENDED   ,SVCall is pending" "Not pending,Pending"
bitfld.long 0x20 14. "           BUSFAULTPENDED ,BusFault is pending" "Not pending,Pending"
bitfld.long 0x20 13. "      MEMFAULTPENDED  ,MemManage is pending" "Not pending,Pending"
textline "                     "
bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault is pending" "Not pending,Pending"
bitfld.long 0x20 11. "           SYSTICKACT     ,SysTick is Active" "Not active,Active"
bitfld.long 0x20 10. "       PENDSVACT       ,PendSV is Active" "Not active,Active"
textline "                     "
bitfld.long 0x20 8. " MONITORACT     ,Monitor is Active" "Not active,Active"
bitfld.long 0x20 7. "            SVCALLACT      ,SVCall is Active" "Not active,Active"
bitfld.long 0x20 3. "       USGFAULTACT     ,UsageFault is Active" "Not active,Active"
textline "                     "
bitfld.long 0x20 1. " BUSFAULTACT    ,BusFault is Active" "Not active,Active"
bitfld.long 0x20 0. "            MEMFAULTACT    ,MemManage is Active" "Not active,Active"
group.byte 0xD28++0x1
line.byte 0x00 "MMFSR,MemManage Status Register"
bitfld.byte 0x00 7. "       MMARVALID      ,Address Valid Flag" "Not valid,Valid"
bitfld.byte 0x00 5. "             MLSPERR        ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred"
bitfld.byte 0x00 4. "     MSTKERR         ,tacking Access Violations" "Not occurred,Occurred"
textline "                     "
bitfld.byte 0x00 3. " MUNSTKERR      ,Unstack Access Violations" "Not occurred,Occurred"
bitfld.byte 0x00 1. "          DACCVIOL       ,Data Access Violation" "Not occurred,Occurred"
bitfld.byte 0x00 0. "     IACCVIOL        ,Instruction Access Violation" "Not occurred,Occurred"
line.byte 0x01 "BFSR,Bus Fault Status Register"
bitfld.byte 0x01 7. "       BFARVALID      ,Address Valid Flag" "Not valid,Valid"
bitfld.byte 0x01 5. "             LSPERR         ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred"
bitfld.byte 0x01 4. "     STKERR          ,Derived bus fault(exception entry)" "Not occurred,Occurred"
textline "                     "
bitfld.byte 0x01 3. " UNSTKERR       ,Derived bus fault(exception return)" "Not occurred,Occurred"
bitfld.byte 0x01 2. "          IMPRECISERR    ,Imprecise data access error" "Not occurred,Occurred"
bitfld.byte 0x01 1. "     PRECISERR       ,Precise data access error" "Not occurred,Occurred"
textline "                     "
bitfld.byte 0x01 0. " IBUSERR        ,Bus fault on an instruction prefetch" "Not occurred,Occurred"
group.word 0xD2A++0x1
line.word 0x00 "USAFAULT,Usage Fault Status Register"
bitfld.word 0x00 9. "     DIVBYZERO      ,Divide by zero error" "No error,Error"
bitfld.word 0x00 8. "              UNALIGNED      ,Unaligned access error" "No error,Error"
bitfld.word 0x00 3. "         NOCP            ,A coprocessor access error" "No error,Error"
textline "                     "
bitfld.word 0x00 2. " INVPC          ,An integrity check error" "No error,Error"
bitfld.word 0x00 1. "              INVSTATE       ,Invalid Combination of EPSR and Instruction" "No error,Error"
bitfld.word 0x00 0. "         UNDEFINSTR      ,Undefined instruction error" "No error,Error"
group.long 0xD2C++0x07
line.long 0x00 "HFSR,Hard Fault Status Register"
bitfld.long 0x00 31. " DEBUGEVT       ,Indicates when a Debug event has occurred" "Not occurred,Occurred"
bitfld.long 0x00 30. "          FORCED         ,Indicates that a fault with configurable priority" "Not occurred,Occurred"
bitfld.long 0x00 1. "     VECTTBL         ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred"
line.long 0x04 "DFSR,Debug Fault Status Register"
bitfld.long 0x04 4. " EXTERNAL       ,Indicates a debug event generated because of the assertion of EDBGRQ" "Not asserted,Asserted"
bitfld.long 0x04 3. "          VCATCH         ,Vector Catch Flag" "Not occurred,Occurred"
bitfld.long 0x04 2. "     DWTTRAP         ,Indicates a debug event generated by the DWT" "Not occurred,Occurred"
textline "                     "
bitfld.long 0x04 1. " BKPT           ,BKPT Flag" "Not executed,Executed"
bitfld.long 0x04 0. "          HALTED         ,Indicates a debug event generated by either" "Not requested,Requested"
group.long 0xD34++0x0B
line.long 0x00 "MMFAR,MemManage Fault Address Register"
line.long 0x04 "BFAR,BusFault Address Register"
line.long 0x08 "AFSR,Auxiliary Fault Status Register"
group.long 0xD88++0x03
line.long 0x00 "CPACR,Coprocessor Access Control Register"
bitfld.long 0x00 22.--23. " CP11           ,Access privileges for coprocessor 11" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 20.--21. "       CP10           ,Access privileges for coprocessor 10" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 14.--15. "  CP7             ,Access privileges for coprocessor 7" "Access denied,Privileged only,Reserved,Full access"
textline "                     "
bitfld.long 0x00 12.--13. " CP6            ,Access privileges for coprocessor 6" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 10.--11. "       CP5            ,Access privileges for coprocessor 5" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 8.--9. "  CP4             ,Access privileges for coprocessor 4" "Access denied,Privileged only,Reserved,Full access"
textline "                     "
bitfld.long 0x00 6.--7. " CP3            ,Access privileges for coprocessor 3" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 4.--5. "       CP2            ,Access privileges for coprocessor 2" "Access denied,Privileged only,Reserved,Full access"
bitfld.long 0x00 2.--3. "  CP1             ,Access privileges for coprocessor 1" "Access denied,Privileged only,Reserved,Full access"
textline "                     "
bitfld.long 0x00 0.--1. " CP0            ,Access privileges for coprocessor 0" "Access denied,Privileged only,Reserved,Full access"
wgroup.long 0xF00++0x03
line.long 0x00 "STIR,Software Trigger Interrupt Register"
hexmask.long.word 0x00 0.--8. 1. " INTID          ,Indicates the interrupt to be triggered"
width 10.
tree "Feature Registers"
rgroup.long 0xD40++0x0B
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
bitfld.long 0x00 4.--7. " STATE1    ,Thumb instruction set support" ",,,Supported,?..."
bitfld.long 0x00 0.--3. "              STATE0         ,ARM instruction set support" "Not supported,?..."
line.long 0x04 "ID_PFR1,Processor Feature Register 1"
bitfld.long 0x04 8.--11. " MPROF     ,M profile programmers' model" ",,2-stack,?..."
line.long 0x08 "ID_DFR0,Debug Feature Register 0"
bitfld.long 0x08 20.--23. " DBGMOD    ,Support for memory-mapped debug model for M profile processors" "Not supported,Supported,?..."
hgroup.long 0xD4C++0x03
hide.long 0x00 "ID_AFR0,Auxiliary Feature Register 0"
rgroup.long 0xD50++0x03
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
bitfld.long 0x00 20.--23. " AUXREG    ,Indicates the support for Auxiliary registers" "Not supported,ACTLR only,?..."
bitfld.long 0x00 16.--19. "          TCMSUP         ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..."
bitfld.long 0x00 12.--15. "        SHRLEV    ,Indicates the number of shareability levels implemented" "Level 1,?..."
textline "                   "
bitfld.long 0x00 8.--11. " OUTMSHR   ,Indicates the outermost shareability domain implemented" "Non-cacheable,,,,,,,,,,,,,,,Ignored"
bitfld.long 0x00 4.--7. "          PMSASUP        ,Indicates support for a PMSA" "Not supported,,,PMSAv7,?..."
hgroup.long 0xD54++0x03
hide.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
rgroup.long 0xD58++0x03
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
bitfld.long 0x00 24.--27. " WFISTALL  ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..."
rgroup.long 0xD60++0x13
line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0"
bitfld.long 0x00 24.--27. " DIVIDE    ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..."
bitfld.long 0x00 20.--23. "          DEBUG          ,Indicates the supported debug instructions" "Not supported,BKPT,?..."
bitfld.long 0x00 16.--19. "        COPROC    ,Indicates the supported coprocessor instructions" "Not supported,CDP/LDC/MCR/STC,CDP2/LDC2/MCR2/STC2,MCRR/MRRC,MCRR2/MRRC2,?..."
textline "                   "
bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..."
bitfld.long 0x00 8.--11. "          BITFIELD       ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..."
bitfld.long 0x00 4.--7. "    BITCOUNT  ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..."
line.long 0x04 "ID_ISAR1,Instruction Set Attributes Register 1"
bitfld.long 0x04 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..."
bitfld.long 0x04 20.--23. "          IMMEDIATE      ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..."
bitfld.long 0x04 16.--19. "  IFTHEN    ,Indicates the supported IfThen instructions" "Not supported,IT,?..."
textline "                   "
bitfld.long 0x04 12.--15. " EXTEND    ,Indicates the supported Extend instructions" "Not supported,Supported,Supported,?..."
line.long 0x08 "ID_ISAR2,Instruction Set Attributes Register 2"
bitfld.long 0x08 24.--27. " REVERSAL  ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..."
bitfld.long 0x08 20.--23. "   MULTU          ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..."
bitfld.long 0x08 16.--19. "    MULTS     ,Indicates the supported advanced signed multiply instructions" "Not supported,Supported,Supported,Supported,?..."
textline "                   "
bitfld.long 0x08 12.--15. " MULT      ,Indicates the supported additional multiply instructions" "Not supported,MLA,MLA/MLS,?..."
bitfld.long 0x08 8.--11. "          MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..."
bitfld.long 0x08 4.--7. "  MEMHINT   ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..."
textline "                   "
bitfld.long 0x08 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,LDRD/STRD,?..."
line.long 0x0C "ID_ISAR3,Instruction Set Attributes Register 3"
bitfld.long 0x0C 24.--27. " TRUENOP   ,Indicates the support for a true  NOP instruction" "Not supported,Supported,?..."
bitfld.long 0x0C 20.--23. "          THUMBCOPY      ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..."
bitfld.long 0x0C 16.--19. "        TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..."
textline "                   "
bitfld.long 0x0C 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,Supported,Supported,?..."
bitfld.long 0x0C 8.--11. "          SVC            ,Indicates the supported SVC instructions" "Not supported,SVC,?..."
bitfld.long 0x0C 4.--7. "        SIMD      ,Indicates the supported SIMD instructions" "Not supported,Supported,,Supported,?..."
textline "                   "
bitfld.long 0x0C 0.--3. " SATURATE  ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB,?..."
line.long 0x10 "ID_ISAR4,Instruction Set Attributes Register 4"
bitfld.long 0x10 24.--27. " PSR_M     ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,?..."
bitfld.long 0x10 20.--23. "          SYNCHPRIMFRAC  ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,Supported,Supported,?..."
bitfld.long 0x10 16.--19. "        BARRIER   ,Indicates the supported Barrier instructions" "Not supported,DMB/DSB/ISB,?..."
textline "                   "
bitfld.long 0x10 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..."
bitfld.long 0x10 4.--7. "          WITHSHIFTS     ,Indicates the support for instructions with shifts" "MOV/shift,Shift LSL 0-3,,Shift other,?..."
bitfld.long 0x10 0.--3. "        UNPRIV    ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,LDRBT/LDRT/STRBT/STRT/LDRHT/LDRSBT/LDRSHTSTRHT,?..."
tree.end
width 6.
tree "CoreSight Identification Registers"
rgroup.long 0xFE0++0x0F
line.long 0x00 "PID0,Peripheral ID0"
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
line.long 0x04 "PID1,Peripheral ID1"
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
hexmask.long.byte 0x04 0.--3. 1. "  Part_Num[11:8] ,Part Number bits[11:8]"
line.long 0x08 "PID2,Peripheral ID2"
hexmask.long.byte 0x08 4.--7. 1. " Revision      ,Revision"
bitfld.long 0x08 3. "  JEDEC          ,JEDEC assigned ID fields" "0,JEDEC"
hexmask.long.byte 0x08 0.--2. 1. "  JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
line.long 0x0C "PID3,Peripheral ID3"
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd        ,Minor revision field"
hexmask.long.byte 0x0C 0.--3. 1. "  CMB            ,Customer-modified block"
rgroup.long 0xFD0++0x03
line.long 0x00 "PID4,Peripheral Identification Register 4"
hexmask.long.byte 0x00 4.--7. 1. " Count         ,4KB count"
hexmask.long.byte 0x00 0.--3. 1. "  JEP106_CC      ,JEP106 continuation code"
rgroup.long 0xFF0++0x0F
line.long 0x00 "CID0,Component ID0 (Preamble)"
line.long 0x04 "CID1,Component ID1"
hexmask.long.byte 0x04 4.--7. 1. " CC            ,Component Class"
hexmask.long.byte 0x04 0.--3. 1. "  Preamble       ,Preamble"
line.long 0x08 "CID2,Component ID2"
line.long 0x0C "CID3,Component ID3"
tree.end
width 0x0B
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Memory Protection Unit"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 15.
rgroup.long 0xD90++0x03
line.long 0x00 "MPU_TYPE,MPU Type Register"
bitfld.long 0x00 16.--23. " IREGION    ,Instruction region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
bitfld.long 0x00 8.--15. "               DREGION   ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
bitfld.long 0x00 0. "                    SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,Supported"
group.long 0xD94++0x03
line.long 0x00 "MPU_CTRL,MPU Control Register"
bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled"
bitfld.long 0x00 1. "         HFNMIENA  ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled"
bitfld.long 0x00 0. "          ENABLE   ,Enables the MPU" "Disabled,Enabled"
group.long 0xD98++0x03
line.long 0x00 "MPU_RNR,MPU Region Number Register"
hexmask.long.byte 0x00 0.--7. 1. " REGION     ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR"
tree.close "MPU regions"
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0
group.long 0xD9C++0x03 "Region 0"
saveout 0xD98 %l 0x0
line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x0
line.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 0 (not implemented)"
saveout 0xD98 %l 0x0
hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x0
hide.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1
group.long 0xD9C++0x03 "Region 1"
saveout 0xD98 %l 0x1
line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x1
line.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 1 (not implemented)"
saveout 0xD98 %l 0x1
hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x1
hide.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2
group.long 0xD9C++0x03 "Region 2"
saveout 0xD98 %l 0x2
line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x2
line.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 2 (not implemented)"
saveout 0xD98 %l 0x2
hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x2
hide.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3
group.long 0xD9C++0x03 "Region 3"
saveout 0xD98 %l 0x3
line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x3
line.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 3 (not implemented)"
saveout 0xD98 %l 0x3
hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x3
hide.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4
group.long 0xD9C++0x03 "Region 4"
saveout 0xD98 %l 0x4
line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x4
line.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 4 (not implemented)"
saveout 0xD98 %l 0x4
hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x4
hide.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5
group.long 0xD9C++0x03 "Region 5"
saveout 0xD98 %l 0x5
line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x5
line.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 5 (not implemented)"
saveout 0xD98 %l 0x5
hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x5
hide.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6
group.long 0xD9C++0x03 "Region 6"
saveout 0xD98 %l 0x6
line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x6
line.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 6 (not implemented)"
saveout 0xD98 %l 0x6
hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x6
hide.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7
group.long 0xD9C++0x03 "Region 7"
saveout 0xD98 %l 0x7
line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x7
line.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 7 (not implemented)"
saveout 0xD98 %l 0x7
hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x7
hide.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8
group.long 0xD9C++0x03 "Region 8"
saveout 0xD98 %l 0x8
line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x8
line.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 8 (not implemented)"
saveout 0xD98 %l 0x8
hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x8
hide.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9
group.long 0xD9C++0x03 "Region 9"
saveout 0xD98 %l 0x9
line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0x9
line.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 9 (not implemented)"
saveout 0xD98 %l 0x9
hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0x9
hide.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA
group.long 0xD9C++0x03 "Region 10"
saveout 0xD98 %l 0xA
line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xA
line.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 10 (not implemented)"
saveout 0xD98 %l 0xA
hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xA
hide.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB
group.long 0xD9C++0x03 "Region 11"
saveout 0xD98 %l 0xB
line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xB
line.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 11 (not implemented)"
saveout 0xD98 %l 0xB
hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xB
hide.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC
group.long 0xD9C++0x03 "Region 12"
saveout 0xD98 %l 0xC
line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xC
line.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 12 (not implemented)"
saveout 0xD98 %l 0xC
hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xC
hide.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD
group.long 0xD9C++0x03 "Region 13"
saveout 0xD98 %l 0xD
line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xD
line.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 13 (not implemented)"
saveout 0xD98 %l 0xD
hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xD
hide.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE
group.long 0xD9C++0x03 "Region 14"
saveout 0xD98 %l 0xE
line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xE
line.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 14 (not implemented)"
saveout 0xD98 %l 0xE
hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xE
hide.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
textline "                        "
textline "                        "
endif
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF
group.long 0xD9C++0x03 "Region 15"
saveout 0xD98 %l 0xF
line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
hexmask.long 0x00 5.--31. 0x20 " ADDR       ,Base address of the region"
group.long 0xDA0++0x03
saveout 0xD98 %l 0xF
line.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
bitfld.long 0x00 28. " XN         ,eXecute Never" "Execute,Not execute"
bitfld.long 0x00 24.--26. "      AP        ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
bitfld.long 0x00 19.--21. "             TEX      ,Type Extension Field" "0,1,2,3,4,5,6,7"
textline "                        "
bitfld.long 0x00 18. " S          ,Shareable Bit" "Not shareable,Shareable"
bitfld.long 0x00 17. "    C         ,Cacheable Bit" "Not cacheable,Cacheable"
bitfld.long 0x00 16. "         B        ,Bufferable Bit" "Not bufferable,Bufferable"
textline "                        "
bitfld.long 0x00 15. " SRD[7..0]  ,Subregion 7 Disable" "0,1"
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
bitfld.long 0x00 1.--5. "         SIZE      ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
bitfld.long 0x00 0. "                ENABLE   ,Enables this region" "Disabled,Enabled"
else
hgroup.long 0xD9C++0x03 "Region 15 (not implemented)"
saveout 0xD98 %l 0xF
hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
hgroup.long 0xDA0++0x03
saveout 0xD98 %l 0xF
hide.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
textline "                        "
textline "                        "
endif
tree.end
width 0x0b
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Nested Vectored Interrupt Controller"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 6.
rgroup.long 0x04++0x03
line.long 0x00 "ICTR,Interrupt Controller Type Register"
bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,33-64,65-96,97-128,129-160,161-192,193-224,225-240,?..."
tree "Interrupt Enable Registers"
width 23.
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
group.long 0x100++0x03
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
group.long 0x100++0x7
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
group.long 0x100++0x0B
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
group.long 0x100++0x0F
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
group.long 0x100++0x13
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
group.long 0x100++0x17
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
group.long 0x100++0x1B
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 30. 0x18 30. 0x98 30. "  ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 29. 0x18 29. 0x98 29. "  ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 28. 0x18 28. 0x98 28. "  ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 27. 0x18 27. 0x98 27. "  ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 26. 0x18 26. 0x98 26. "  ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 24. 0x18 24. 0x98 24. "  ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 23. 0x18 23. 0x98 23. "  ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 22. 0x18 22. 0x98 22. "  ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 21. 0x18 21. 0x98 21. "  ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 20. 0x18 20. 0x98 20. "  ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 18. 0x18 18. 0x98 18. "  ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 17. 0x18 17. 0x98 17. "  ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 16. 0x18 16. 0x98 16. "  ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 15. 0x18 15. 0x98 15. "  ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 14. 0x18 14. 0x98 14. "  ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 12. 0x18 12. 0x98 12. "  ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 11. 0x18 11. 0x98 11. "  ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 10. 0x18 10. 0x98 10. "  ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 9. 0x18 9. 0x98 9. "  ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 8. 0x18 8. 0x98 8. "  ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 6. 0x18 6. 0x98 6. "  ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 5. 0x18 5. 0x98 5. "  ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 4. 0x18 4. 0x98 4. "  ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 3. 0x18 3. 0x98 3. "  ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 2. 0x18 2. 0x98 2. "  ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 0. 0x18 0. 0x98 0. "  ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
group.long 0x100++0x1F
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  ENA30  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  ENA29  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  ENA28  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  ENA27  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  ENA26  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  ENA24  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  ENA23  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  ENA22  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  ENA21  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  ENA20  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  ENA18  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  ENA17  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  ENA16  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  ENA15  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  ENA14  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  ENA12  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  ENA11  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  ENA10  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  ENA9   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  ENA8   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  ENA6   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  ENA5   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  ENA4   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  ENA3   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  ENA2   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  ENA0   ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  ENA62  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  ENA61  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  ENA60  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  ENA59  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  ENA58  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  ENA56  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  ENA55  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  ENA54  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  ENA53  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  ENA52  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  ENA50  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  ENA49  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  ENA48  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  ENA47  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  ENA46  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  ENA44  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  ENA43  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  ENA42  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  ENA41  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  ENA40  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  ENA38  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  ENA37  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  ENA36  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  ENA35  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  ENA34  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  ENA32  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  ENA94  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  ENA93  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  ENA92  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  ENA91  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  ENA90  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  ENA88  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  ENA87  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  ENA86  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  ENA85  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  ENA84  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  ENA82  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  ENA81  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  ENA80  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  ENA79  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  ENA78  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  ENA76  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  ENA75  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  ENA74  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  ENA73  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  ENA72  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  ENA70  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  ENA69  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  ENA68  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  ENA67  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  ENA66  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  ENA64  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  ENA99  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  ENA98  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  ENA96  ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 30. 0x18 30. 0x98 30. "  ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 29. 0x18 29. 0x98 29. "  ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 28. 0x18 28. 0x98 28. "  ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 27. 0x18 27. 0x98 27. "  ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 26. 0x18 26. 0x98 26. "  ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 24. 0x18 24. 0x98 24. "  ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 23. 0x18 23. 0x98 23. "  ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 22. 0x18 22. 0x98 22. "  ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 21. 0x18 21. 0x98 21. "  ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 20. 0x18 20. 0x98 20. "  ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 18. 0x18 18. 0x98 18. "  ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 17. 0x18 17. 0x98 17. "  ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 16. 0x18 16. 0x98 16. "  ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 15. 0x18 15. 0x98 15. "  ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 14. 0x18 14. 0x98 14. "  ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 12. 0x18 12. 0x98 12. "  ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 11. 0x18 11. 0x98 11. "  ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 10. 0x18 10. 0x98 10. "  ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 9. 0x18 9. 0x98 9. "  ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 8. 0x18 8. 0x98 8. "  ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 6. 0x18 6. 0x98 6. "  ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 5. 0x18 5. 0x98 5. "  ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 4. 0x18 4. 0x98 4. "  ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 3. 0x18 3. 0x98 3. "  ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 2. 0x18 2. 0x98 2. "  ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x18 0. 0x18 0. 0x98 0. "  ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
line.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. "  ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. "  ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. "  ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. "  ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. "  ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. "  ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. "  ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. "  ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. "  ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. "  ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
textline "                                "
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. "  ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. "  ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. "  ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
else
hgroup.long 0x100++0x1F
hide.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
hide.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
endif
tree.end
tree "Interrupt Pending Registers"
width 23.
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
group.long 0x200++0x03
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
group.long 0x200++0x07
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
group.long 0x200++0x0B
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
group.long 0x200++0x0F
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
group.long 0x200++0x13
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
group.long 0x200++0x17
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
group.long 0x200++0x1B
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 30. 0x18 30. 0x98 30. "  PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 29. 0x18 29. 0x98 29. "  PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 28. 0x18 28. 0x98 28. "  PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 27. 0x18 27. 0x98 27. "  PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 26. 0x18 26. 0x98 26. "  PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 24. 0x18 24. 0x98 24. "  PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 23. 0x18 23. 0x98 23. "  PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 22. 0x18 22. 0x98 22. "  PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 21. 0x18 21. 0x98 21. "  PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 20. 0x18 20. 0x98 20. "  PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 18. 0x18 18. 0x98 18. "  PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 17. 0x18 17. 0x98 17. "  PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 16. 0x18 16. 0x98 16. "  PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 15. 0x18 15. 0x98 15. "  PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 14. 0x18 14. 0x98 14. "  PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 12. 0x18 12. 0x98 12. "  PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 11. 0x18 11. 0x98 11. "  PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 10. 0x18 10. 0x98 10. "  PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 9. 0x18 9. 0x98 9. "  PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 8. 0x18 8. 0x98 8. "  PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 6. 0x18 6. 0x98 6. "  PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 5. 0x18 5. 0x98 5. "  PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 4. 0x18 4. 0x98 4. "  PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 3. 0x18 3. 0x98 3. "  PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 2. 0x18 2. 0x98 2. "  PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 0. 0x18 0. 0x98 0. "  PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
group.long 0x200++0x1F
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  PEN30  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  PEN29  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  PEN28  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  PEN27  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  PEN26  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  PEN24  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  PEN23  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  PEN22  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  PEN21  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  PEN20  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  PEN18  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  PEN17  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  PEN16  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  PEN15  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  PEN14  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  PEN12  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  PEN11  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  PEN10  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  PEN9   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  PEN8   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  PEN6   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  PEN5   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  PEN4   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  PEN3   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  PEN2   ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1   ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  PEN0   ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 30. 0x04 30. 0x84 30. "  PEN62  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 29. 0x04 29. 0x84 29. "  PEN61  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 28. 0x04 28. 0x84 28. "  PEN60  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 27. 0x04 27. 0x84 27. "  PEN59  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 26. 0x04 26. 0x84 26. "  PEN58  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 24. 0x04 24. 0x84 24. "  PEN56  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 23. 0x04 23. 0x84 23. "  PEN55  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 22. 0x04 22. 0x84 22. "  PEN54  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 21. 0x04 21. 0x84 21. "  PEN53  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 20. 0x04 20. 0x84 20. "  PEN52  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 18. 0x04 18. 0x84 18. "  PEN50  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 17. 0x04 17. 0x84 17. "  PEN49  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 16. 0x04 16. 0x84 16. "  PEN48  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 15. 0x04 15. 0x84 15. "  PEN47  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 14. 0x04 14. 0x84 14. "  PEN46  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 12. 0x04 12. 0x84 12. "  PEN44  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 11. 0x04 11. 0x84 11. "  PEN43  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 10. 0x04 10. 0x84 10. "  PEN42  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 9. 0x04 9. 0x84 9. "  PEN41  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 8. 0x04 8. 0x84 8. "  PEN40  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 6. 0x04 6. 0x84 6. "  PEN38  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 5. 0x04 5. 0x84 5. "  PEN37  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 4. 0x04 4. 0x84 4. "  PEN36  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 3. 0x04 3. 0x84 3. "  PEN35  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 2. 0x04 2. 0x84 2. "  PEN34  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x04 0. 0x04 0. 0x84 0. "  PEN32  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 30. 0x08 30. 0x88 30. "  PEN94  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 29. 0x08 29. 0x88 29. "  PEN93  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 28. 0x08 28. 0x88 28. "  PEN92  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 27. 0x08 27. 0x88 27. "  PEN91  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 26. 0x08 26. 0x88 26. "  PEN90  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 24. 0x08 24. 0x88 24. "  PEN88  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 23. 0x08 23. 0x88 23. "  PEN87  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 22. 0x08 22. 0x88 22. "  PEN86  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 21. 0x08 21. 0x88 21. "  PEN85  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 20. 0x08 20. 0x88 20. "  PEN84  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 18. 0x08 18. 0x88 18. "  PEN82  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 17. 0x08 17. 0x88 17. "  PEN81  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 16. 0x08 16. 0x88 16. "  PEN80  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 15. 0x08 15. 0x88 15. "  PEN79  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 14. 0x08 14. 0x88 14. "  PEN78  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 12. 0x08 12. 0x88 12. "  PEN76  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 11. 0x08 11. 0x88 11. "  PEN75  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 10. 0x08 10. 0x88 10. "  PEN74  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 9. 0x08 9. 0x88 9. "  PEN73  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 8. 0x08 8. 0x88 8. "  PEN72  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 6. 0x08 6. 0x88 6. "  PEN70  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 5. 0x08 5. 0x88 5. "  PEN69  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 4. 0x08 4. 0x88 4. "  PEN68  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 3. 0x08 3. 0x88 3. "  PEN67  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 2. 0x08 2. 0x88 2. "  PEN66  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x08 0. 0x08 0. 0x88 0. "  PEN64  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. "  PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. "  PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. "  PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. "  PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. "  PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. "  PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. "  PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. "  PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. "  PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. "  PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. "  PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. "  PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. "  PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. "  PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. "  PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. "  PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. "  PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. "  PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. "  PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. "  PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. "  PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. "  PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. "  PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. "  PEN99  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. "  PEN98  ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97  ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. "  PEN96  ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 30. 0x10 30. 0x90 30. "  PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 29. 0x10 29. 0x90 29. "  PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 28. 0x10 28. 0x90 28. "  PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 27. 0x10 27. 0x90 27. "  PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 26. 0x10 26. 0x90 26. "  PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 24. 0x10 24. 0x90 24. "  PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 23. 0x10 23. 0x90 23. "  PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 22. 0x10 22. 0x90 22. "  PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 21. 0x10 21. 0x90 21. "  PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 20. 0x10 20. 0x90 20. "  PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 18. 0x10 18. 0x90 18. "  PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 17. 0x10 17. 0x90 17. "  PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 16. 0x10 16. 0x90 16. "  PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 15. 0x10 15. 0x90 15. "  PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 14. 0x10 14. 0x90 14. "  PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 12. 0x10 12. 0x90 12. "  PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 11. 0x10 11. 0x90 11. "  PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 10. 0x10 10. 0x90 10. "  PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 9. 0x10 9. 0x90 9. "  PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 8. 0x10 8. 0x90 8. "  PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 6. 0x10 6. 0x90 6. "  PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 5. 0x10 5. 0x90 5. "  PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 4. 0x10 4. 0x90 4. "  PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 3. 0x10 3. 0x90 3. "  PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 2. 0x10 2. 0x90 2. "  PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x10 0. 0x10 0. 0x90 0. "  PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 30. 0x14 30. 0x94 30. "  PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 29. 0x14 29. 0x94 29. "  PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 28. 0x14 28. 0x94 28. "  PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 27. 0x14 27. 0x94 27. "  PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 26. 0x14 26. 0x94 26. "  PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 24. 0x14 24. 0x94 24. "  PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 23. 0x14 23. 0x94 23. "  PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 22. 0x14 22. 0x94 22. "  PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 21. 0x14 21. 0x94 21. "  PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 20. 0x14 20. 0x94 20. "  PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 18. 0x14 18. 0x94 18. "  PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 17. 0x14 17. 0x94 17. "  PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 16. 0x14 16. 0x94 16. "  PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 15. 0x14 15. 0x94 15. "  PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 14. 0x14 14. 0x94 14. "  PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 12. 0x14 12. 0x94 12. "  PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 11. 0x14 11. 0x94 11. "  PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 10. 0x14 10. 0x94 10. "  PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 9. 0x14 9. 0x94 9. "  PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 8. 0x14 8. 0x94 8. "  PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 6. 0x14 6. 0x94 6. "  PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 5. 0x14 5. 0x94 5. "  PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 4. 0x14 4. 0x94 4. "  PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 3. 0x14 3. 0x94 3. "  PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 2. 0x14 2. 0x94 2. "  PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x14 0. 0x14 0. 0x94 0. "  PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 30. 0x18 30. 0x98 30. "  PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 29. 0x18 29. 0x98 29. "  PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 28. 0x18 28. 0x98 28. "  PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 27. 0x18 27. 0x98 27. "  PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 26. 0x18 26. 0x98 26. "  PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 24. 0x18 24. 0x98 24. "  PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 23. 0x18 23. 0x98 23. "  PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 22. 0x18 22. 0x98 22. "  PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 21. 0x18 21. 0x98 21. "  PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 20. 0x18 20. 0x98 20. "  PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 18. 0x18 18. 0x98 18. "  PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 17. 0x18 17. 0x98 17. "  PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 16. 0x18 16. 0x98 16. "  PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 15. 0x18 15. 0x98 15. "  PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 14. 0x18 14. 0x98 14. "  PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 12. 0x18 12. 0x98 12. "  PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 11. 0x18 11. 0x98 11. "  PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 10. 0x18 10. 0x98 10. "  PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 9. 0x18 9. 0x98 9. "  PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 8. 0x18 8. 0x98 8. "  PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 6. 0x18 6. 0x98 6. "  PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 5. 0x18 5. 0x98 5. "  PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 4. 0x18 4. 0x98 4. "  PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 3. 0x18 3. 0x98 3. "  PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 2. 0x18 2. 0x98 2. "  PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x18 0. 0x18 0. 0x98 0. "  PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
line.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. "  PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. "  PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. "  PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. "  PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. "  PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. "  PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. "  PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. "  PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. "  PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. "  PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending"
textline "                                "
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. "  PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. "  PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending"
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. "  PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending"
else
hgroup.long 0x200++0x1F
hide.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
hide.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
endif
tree.end
tree "Interrupt Active Bit Registers"
width 9.
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
rgroup.long 0x300++0x03
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
rgroup.long 0x300++0x07
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
rgroup.long 0x300++0x0B
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
rgroup.long 0x300++0x0F
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
rgroup.long 0x300++0x13
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
line.long 0x10 "ACTIVE5,Active Bit Register 5"
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 30. "  ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 29. "  ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 28. "  ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 27. "  ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 26. "  ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 24. "  ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 23. "  ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 22. "  ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 21. "  ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 20. "  ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 18. "  ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 17. "  ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 16. "  ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 15. "  ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 14. "  ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 12. "  ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 11. "  ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 10. "  ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 9. "  ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 8. "  ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 6. "  ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 5. "  ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 4. "  ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 3. "  ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 2. "  ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 0. "  ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
rgroup.long 0x300++0x17
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
line.long 0x10 "ACTIVE5,Active Bit Register 5"
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 30. "  ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 29. "  ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 28. "  ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 27. "  ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 26. "  ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 24. "  ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 23. "  ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 22. "  ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 21. "  ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 20. "  ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 18. "  ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 17. "  ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 16. "  ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 15. "  ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 14. "  ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 12. "  ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 11. "  ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 10. "  ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 9. "  ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 8. "  ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 6. "  ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 5. "  ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 4. "  ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 3. "  ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 2. "  ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 0. "  ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
line.long 0x14 "ACTIVE6,Active Bit Register 6"
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 30. "  ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 29. "  ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 28. "  ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 27. "  ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 26. "  ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 24. "  ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 23. "  ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 22. "  ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 21. "  ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 20. "  ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 18. "  ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 17. "  ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 16. "  ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 15. "  ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 14. "  ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 12. "  ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 11. "  ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 10. "  ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 9. "  ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 8. "  ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 6. "  ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 5. "  ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 4. "  ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 3. "  ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 2. "  ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 0. "  ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
rgroup.long 0x300++0x1B
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
line.long 0x10 "ACTIVE5,Active Bit Register 5"
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 30. "  ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 29. "  ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 28. "  ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 27. "  ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 26. "  ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 24. "  ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 23. "  ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 22. "  ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 21. "  ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 20. "  ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 18. "  ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 17. "  ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 16. "  ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 15. "  ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 14. "  ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 12. "  ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 11. "  ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 10. "  ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 9. "  ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 8. "  ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 6. "  ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 5. "  ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 4. "  ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 3. "  ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 2. "  ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 0. "  ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
line.long 0x14 "ACTIVE6,Active Bit Register 6"
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 30. "  ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 29. "  ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 28. "  ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 27. "  ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 26. "  ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 24. "  ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 23. "  ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 22. "  ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 21. "  ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 20. "  ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 18. "  ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 17. "  ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 16. "  ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 15. "  ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 14. "  ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 12. "  ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 11. "  ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 10. "  ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 9. "  ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 8. "  ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 6. "  ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 5. "  ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 4. "  ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 3. "  ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 2. "  ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 0. "  ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
line.long 0x18 "ACTIVE7,Active Bit Register 7"
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 30. "  ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 29. "  ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 28. "  ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 27. "  ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 26. "  ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 24. "  ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 23. "  ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 22. "  ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 21. "  ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 20. "  ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 18. "  ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 17. "  ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 16. "  ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 15. "  ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 14. "  ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 12. "  ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 11. "  ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 10. "  ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 9. "  ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 8. "  ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 6. "  ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 5. "  ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 4. "  ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 3. "  ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 2. "  ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 0. "  ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
rgroup.long 0x300++0x1F
line.long 0x00 "ACTIVE1,Active Bit Register 1"
bitfld.long 0x00 31. " ACTIVE31  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 30. "  ACTIVE30  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 29. "  ACTIVE29  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 28. "  ACTIVE28  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 27. "  ACTIVE27  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 26. "  ACTIVE26  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 25. " ACTIVE25  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 24. "  ACTIVE24  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 23. "  ACTIVE23  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 22. "  ACTIVE22  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 21. "  ACTIVE21  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 20. "  ACTIVE20  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 19. " ACTIVE19  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 18. "  ACTIVE18  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 17. "  ACTIVE17  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 16. "  ACTIVE16  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 15. "  ACTIVE15  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 14. "  ACTIVE14  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 13. " ACTIVE13  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 12. "  ACTIVE12  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 11. "  ACTIVE11  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 10. "  ACTIVE10  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 9. "  ACTIVE9   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 8. "  ACTIVE8   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 7. " ACTIVE7   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 6. "  ACTIVE6   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 5. "  ACTIVE5   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 4. "  ACTIVE4   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 3. "  ACTIVE3   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 2. "  ACTIVE2   ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x00 1. " ACTIVE1   ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x00 0. "  ACTIVE0   ,Interrupt Active Flag" "Not active,Active"
line.long 0x04 "ACTIVE2,Active Bit Register 2"
bitfld.long 0x04 31. " ACTIVE63  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 30. "  ACTIVE62  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 29. "  ACTIVE61  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 28. "  ACTIVE60  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 27. "  ACTIVE59  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 26. "  ACTIVE58  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 25. " ACTIVE57  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 24. "  ACTIVE56  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 23. "  ACTIVE55  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 22. "  ACTIVE54  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 21. "  ACTIVE53  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 20. "  ACTIVE52  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 19. " ACTIVE51  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 18. "  ACTIVE50  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 17. "  ACTIVE49  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 16. "  ACTIVE48  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 15. "  ACTIVE47  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 14. "  ACTIVE46  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 13. " ACTIVE45  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 12. "  ACTIVE44  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 11. "  ACTIVE43  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 10. "  ACTIVE42  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 9. "  ACTIVE41  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 8. "  ACTIVE40  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 7. " ACTIVE39  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 6. "  ACTIVE38  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 5. "  ACTIVE37  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 4. "  ACTIVE36  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 3. "  ACTIVE35  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 2. "  ACTIVE34  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x04 1. " ACTIVE33  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x04 0. "  ACTIVE32  ,Interrupt Active Flag" "Not active,Active"
line.long 0x08 "ACTIVE3,Active Bit Register 3"
bitfld.long 0x08 31. " ACTIVE95  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 30. "  ACTIVE94  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 29. "  ACTIVE93  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 28. "  ACTIVE92  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 27. "  ACTIVE91  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 26. "  ACTIVE90  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 25. " ACTIVE89  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 24. "  ACTIVE88  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 23. "  ACTIVE87  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 22. "  ACTIVE86  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 21. "  ACTIVE85  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 20. "  ACTIVE84  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 19. " ACTIVE83  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 18. "  ACTIVE82  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 17. "  ACTIVE81  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 16. "  ACTIVE80  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 15. "  ACTIVE79  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 14. "  ACTIVE78  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 13. " ACTIVE77  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 12. "  ACTIVE76  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 11. "  ACTIVE75  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 10. "  ACTIVE74  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 9. "  ACTIVE73  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 8. "  ACTIVE72  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 7. " ACTIVE71  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 6. "  ACTIVE70  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 5. "  ACTIVE69  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 4. "  ACTIVE68  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 3. "  ACTIVE67  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 2. "  ACTIVE66  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x08 1. " ACTIVE65  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x08 0. "  ACTIVE64  ,Interrupt Active Flag" "Not active,Active"
line.long 0x0c "ACTIVE4,Active Bit Register 4"
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 30. "  ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 29. "  ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 28. "  ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 27. "  ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 26. "  ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 24. "  ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 23. "  ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 22. "  ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 21. "  ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 20. "  ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 18. "  ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 17. "  ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 16. "  ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 15. "  ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 14. "  ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 12. "  ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 11. "  ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 10. "  ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 9. "  ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 8. "  ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 6. "  ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 5. "  ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 4. "  ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 3. "  ACTIVE99  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 2. "  ACTIVE98  ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x0c 1. " ACTIVE97  ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x0c 0. "  ACTIVE96  ,Interrupt Active Flag" "Not active,Active"
line.long 0x10 "ACTIVE5,Active Bit Register 5"
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 30. "  ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 29. "  ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 28. "  ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 27. "  ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 26. "  ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 24. "  ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 23. "  ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 22. "  ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 21. "  ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 20. "  ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 18. "  ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 17. "  ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 16. "  ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 15. "  ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 14. "  ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 12. "  ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 11. "  ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 10. "  ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 9. "  ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 8. "  ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 6. "  ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 5. "  ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 4. "  ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 3. "  ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 2. "  ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x10 0. "  ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
line.long 0x14 "ACTIVE6,Active Bit Register 6"
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 30. "  ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 29. "  ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 28. "  ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 27. "  ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 26. "  ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 24. "  ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 23. "  ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 22. "  ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 21. "  ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 20. "  ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 18. "  ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 17. "  ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 16. "  ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 15. "  ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 14. "  ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 12. "  ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 11. "  ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 10. "  ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 9. "  ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 8. "  ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 6. "  ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 5. "  ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 4. "  ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 3. "  ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 2. "  ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x14 0. "  ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
line.long 0x18 "ACTIVE7,Active Bit Register 7"
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 30. "  ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 29. "  ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 28. "  ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 27. "  ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 26. "  ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 24. "  ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 23. "  ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 22. "  ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 21. "  ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 20. "  ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 18. "  ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 17. "  ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 16. "  ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 15. "  ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 14. "  ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 12. "  ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 11. "  ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 10. "  ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 9. "  ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 8. "  ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 6. "  ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 5. "  ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 4. "  ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 3. "  ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 2. "  ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x18 0. "  ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
line.long 0x1c "ACTIVE8,Active Bit Register 8"
bitfld.long 0x1c 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 14. "  ACTIVE238 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 13. "  ACTIVE237 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 12. "  ACTIVE236 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 11. "  ACTIVE235 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 10. "  ACTIVE234 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x1c 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 8. "  ACTIVE232 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 7. "  ACTIVE231 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 6. "  ACTIVE230 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 5. "  ACTIVE229 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 4. "  ACTIVE228 ,Interrupt Active Flag" "Not active,Active"
textline "                  "
bitfld.long 0x1c 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 2. "  ACTIVE226 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 1. "  ACTIVE225 ,Interrupt Active Flag" "Not active,Active"
bitfld.long 0x1c 0. "  ACTIVE224 ,Interrupt Active Flag" "Not active,Active"
else
hgroup.long 0x300++0x1F
hide.long 0x00 "ACTIVE1,Active Bit Register 1"
hide.long 0x04 "ACTIVE2,Active Bit Register 2"
hide.long 0x08 "ACTIVE3,Active Bit Register 3"
hide.long 0x0c "ACTIVE4,Active Bit Register 4"
hide.long 0x10 "ACTIVE5,Active Bit Register 5"
hide.long 0x14 "ACTIVE6,Active Bit Register 6"
hide.long 0x18 "ACTIVE7,Active Bit Register 7"
hide.long 0x1c "ACTIVE8,Active Bit Register 8"
endif
tree.end
tree "Interrupt Priority Registers"
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
group.long 0x400++0x1F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
group.long 0x400++0x3F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
group.long 0x400++0x5F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
group.long 0x400++0x7F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99  ,Interrupt 99  Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98  ,Interrupt 98  Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97  ,Interrupt 97  Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96  ,Interrupt 96  Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
group.long 0x400++0x9F
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99  ,Interrupt 99  Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98  ,Interrupt 98  Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97  ,Interrupt 97  Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96  ,Interrupt 96  Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
line.long 0x80 "IPR32,Interrupt Priority Register"
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
hexmask.long.byte 0x80 16.--23. 1. "  PRI_130 ,Interrupt 130 Priority"
hexmask.long.byte 0x80 8.--15. 1. "  PRI_129 ,Interrupt 129 Priority"
hexmask.long.byte 0x80 0.--7. 1. "  PRI_128 ,Interrupt 128 Priority"
line.long 0x84 "IPR33,Interrupt Priority Register"
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
hexmask.long.byte 0x84 16.--23. 1. "  PRI_134 ,Interrupt 134 Priority"
hexmask.long.byte 0x84 8.--15. 1. "  PRI_133 ,Interrupt 133 Priority"
hexmask.long.byte 0x84 0.--7. 1. "  PRI_132 ,Interrupt 132 Priority"
line.long 0x88 "IPR34,Interrupt Priority Register"
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
hexmask.long.byte 0x88 16.--23. 1. "  PRI_138 ,Interrupt 138 Priority"
hexmask.long.byte 0x88 8.--15. 1. "  PRI_137 ,Interrupt 137 Priority"
hexmask.long.byte 0x88 0.--7. 1. "  PRI_136 ,Interrupt 136 Priority"
line.long 0x8C "IPR35,Interrupt Priority Register"
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
hexmask.long.byte 0x8C 16.--23. 1. "  PRI_142 ,Interrupt 142 Priority"
hexmask.long.byte 0x8C 8.--15. 1. "  PRI_141 ,Interrupt 141 Priority"
hexmask.long.byte 0x8C 0.--7. 1. "  PRI_140 ,Interrupt 140 Priority"
line.long 0x90 "IPR36,Interrupt Priority Register"
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
hexmask.long.byte 0x90 16.--23. 1. "  PRI_146 ,Interrupt 146 Priority"
hexmask.long.byte 0x90 8.--15. 1. "  PRI_145 ,Interrupt 145 Priority"
hexmask.long.byte 0x90 0.--7. 1. "  PRI_144 ,Interrupt 144 Priority"
line.long 0x94 "IPR37,Interrupt Priority Register"
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
hexmask.long.byte 0x94 16.--23. 1. "  PRI_150 ,Interrupt 150 Priority"
hexmask.long.byte 0x94 8.--15. 1. "  PRI_149 ,Interrupt 149 Priority"
hexmask.long.byte 0x94 0.--7. 1. "  PRI_148 ,Interrupt 148 Priority"
line.long 0x98 "IPR38,Interrupt Priority Register"
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
hexmask.long.byte 0x98 16.--23. 1. "  PRI_154 ,Interrupt 154 Priority"
hexmask.long.byte 0x98 8.--15. 1. "  PRI_153 ,Interrupt 153 Priority"
hexmask.long.byte 0x98 0.--7. 1. "  PRI_152 ,Interrupt 152 Priority"
line.long 0x9C "IPR39,Interrupt Priority Register"
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
hexmask.long.byte 0x9C 16.--23. 1. "  PRI_158 ,Interrupt 158 Priority"
hexmask.long.byte 0x9C 8.--15. 1. "  PRI_157 ,Interrupt 157 Priority"
hexmask.long.byte 0x9C 0.--7. 1. "  PRI_156 ,Interrupt 156 Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
group.long 0x400++0xBF
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99  ,Interrupt 99  Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98  ,Interrupt 98  Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97  ,Interrupt 97  Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96  ,Interrupt 96  Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
line.long 0x80 "IPR32,Interrupt Priority Register"
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
hexmask.long.byte 0x80 16.--23. 1. "  PRI_130 ,Interrupt 130 Priority"
hexmask.long.byte 0x80 8.--15. 1. "  PRI_129 ,Interrupt 129 Priority"
hexmask.long.byte 0x80 0.--7. 1. "  PRI_128 ,Interrupt 128 Priority"
line.long 0x84 "IPR33,Interrupt Priority Register"
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
hexmask.long.byte 0x84 16.--23. 1. "  PRI_134 ,Interrupt 134 Priority"
hexmask.long.byte 0x84 8.--15. 1. "  PRI_133 ,Interrupt 133 Priority"
hexmask.long.byte 0x84 0.--7. 1. "  PRI_132 ,Interrupt 132 Priority"
line.long 0x88 "IPR34,Interrupt Priority Register"
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
hexmask.long.byte 0x88 16.--23. 1. "  PRI_138 ,Interrupt 138 Priority"
hexmask.long.byte 0x88 8.--15. 1. "  PRI_137 ,Interrupt 137 Priority"
hexmask.long.byte 0x88 0.--7. 1. "  PRI_136 ,Interrupt 136 Priority"
line.long 0x8C "IPR35,Interrupt Priority Register"
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
hexmask.long.byte 0x8C 16.--23. 1. "  PRI_142 ,Interrupt 142 Priority"
hexmask.long.byte 0x8C 8.--15. 1. "  PRI_141 ,Interrupt 141 Priority"
hexmask.long.byte 0x8C 0.--7. 1. "  PRI_140 ,Interrupt 140 Priority"
line.long 0x90 "IPR36,Interrupt Priority Register"
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
hexmask.long.byte 0x90 16.--23. 1. "  PRI_146 ,Interrupt 146 Priority"
hexmask.long.byte 0x90 8.--15. 1. "  PRI_145 ,Interrupt 145 Priority"
hexmask.long.byte 0x90 0.--7. 1. "  PRI_144 ,Interrupt 144 Priority"
line.long 0x94 "IPR37,Interrupt Priority Register"
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
hexmask.long.byte 0x94 16.--23. 1. "  PRI_150 ,Interrupt 150 Priority"
hexmask.long.byte 0x94 8.--15. 1. "  PRI_149 ,Interrupt 149 Priority"
hexmask.long.byte 0x94 0.--7. 1. "  PRI_148 ,Interrupt 148 Priority"
line.long 0x98 "IPR38,Interrupt Priority Register"
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
hexmask.long.byte 0x98 16.--23. 1. "  PRI_154 ,Interrupt 154 Priority"
hexmask.long.byte 0x98 8.--15. 1. "  PRI_153 ,Interrupt 153 Priority"
hexmask.long.byte 0x98 0.--7. 1. "  PRI_152 ,Interrupt 152 Priority"
line.long 0x9C "IPR39,Interrupt Priority Register"
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
hexmask.long.byte 0x9C 16.--23. 1. "  PRI_158 ,Interrupt 158 Priority"
hexmask.long.byte 0x9C 8.--15. 1. "  PRI_157 ,Interrupt 157 Priority"
hexmask.long.byte 0x9C 0.--7. 1. "  PRI_156 ,Interrupt 156 Priority"
line.long 0xA0 "IPR40,Interrupt Priority Register"
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
hexmask.long.byte 0xA0 16.--23. 1. "  PRI_162 ,Interrupt 162 Priority"
hexmask.long.byte 0xA0 8.--15. 1. "  PRI_161 ,Interrupt 161 Priority"
hexmask.long.byte 0xA0 0.--7. 1. "  PRI_160 ,Interrupt 160 Priority"
line.long 0xA4 "IPR41,Interrupt Priority Register"
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
hexmask.long.byte 0xA4 16.--23. 1. "  PRI_166 ,Interrupt 166 Priority"
hexmask.long.byte 0xA4 8.--15. 1. "  PRI_165 ,Interrupt 165 Priority"
hexmask.long.byte 0xA4 0.--7. 1. "  PRI_164 ,Interrupt 164 Priority"
line.long 0xA8 "IPR42,Interrupt Priority Register"
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
hexmask.long.byte 0xA8 16.--23. 1. "  PRI_170 ,Interrupt 170 Priority"
hexmask.long.byte 0xA8 8.--15. 1. "  PRI_169 ,Interrupt 169 Priority"
hexmask.long.byte 0xA8 0.--7. 1. "  PRI_168 ,Interrupt 168 Priority"
line.long 0xAC "IPR43,Interrupt Priority Register"
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
hexmask.long.byte 0xAC 16.--23. 1. "  PRI_174 ,Interrupt 174 Priority"
hexmask.long.byte 0xAC 8.--15. 1. "  PRI_173 ,Interrupt 173 Priority"
hexmask.long.byte 0xAC 0.--7. 1. "  PRI_172 ,Interrupt 172 Priority"
line.long 0xB0 "IPR44,Interrupt Priority Register"
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
hexmask.long.byte 0xB0 16.--23. 1. "  PRI_178 ,Interrupt 178 Priority"
hexmask.long.byte 0xB0 8.--15. 1. "  PRI_177 ,Interrupt 177 Priority"
hexmask.long.byte 0xB0 0.--7. 1. "  PRI_176 ,Interrupt 176 Priority"
line.long 0xB4 "IPR45,Interrupt Priority Register"
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
hexmask.long.byte 0xB4 16.--23. 1. "  PRI_182 ,Interrupt 182 Priority"
hexmask.long.byte 0xB4 8.--15. 1. "  PRI_181 ,Interrupt 181 Priority"
hexmask.long.byte 0xB4 0.--7. 1. "  PRI_180 ,Interrupt 180 Priority"
line.long 0xB8 "IPR46,Interrupt Priority Register"
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
hexmask.long.byte 0xB8 16.--23. 1. "  PRI_186 ,Interrupt 186 Priority"
hexmask.long.byte 0xB8 8.--15. 1. "  PRI_185 ,Interrupt 185 Priority"
hexmask.long.byte 0xB8 0.--7. 1. "  PRI_184 ,Interrupt 184 Priority"
line.long 0xBC "IPR47,Interrupt Priority Register"
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
hexmask.long.byte 0xBC 16.--23. 1. "  PRI_190 ,Interrupt 190 Priority"
hexmask.long.byte 0xBC 8.--15. 1. "  PRI_189 ,Interrupt 189 Priority"
hexmask.long.byte 0xBC 0.--7. 1. "  PRI_188 ,Interrupt 188 Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
group.long 0x400++0xDF
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3   ,Interrupt 3   Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2   ,Interrupt 2   Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1   ,Interrupt 1   Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0   ,Interrupt 0   Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7   ,Interrupt 7   Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6   ,Interrupt 6   Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5   ,Interrupt 5   Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4   ,Interrupt 4   Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11  ,Interrupt 11  Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10  ,Interrupt 10  Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9   ,Interrupt 9   Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8   ,Interrupt 8   Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15  ,Interrupt 15  Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14  ,Interrupt 14  Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13  ,Interrupt 13  Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12  ,Interrupt 12  Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19  ,Interrupt 19  Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18  ,Interrupt 18  Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17  ,Interrupt 17  Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16  ,Interrupt 16  Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23  ,Interrupt 23  Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22  ,Interrupt 22  Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21  ,Interrupt 21  Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20  ,Interrupt 20  Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27  ,Interrupt 27  Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26  ,Interrupt 26  Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25  ,Interrupt 25  Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24  ,Interrupt 24  Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31  ,Interrupt 31  Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30  ,Interrupt 30  Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29  ,Interrupt 29  Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28  ,Interrupt 28  Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35  ,Interrupt 35  Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34  ,Interrupt 34  Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33  ,Interrupt 33  Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32  ,Interrupt 32  Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39  ,Interrupt 39  Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38  ,Interrupt 38  Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37  ,Interrupt 37  Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36  ,Interrupt 36  Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43  ,Interrupt 43  Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42  ,Interrupt 42  Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41  ,Interrupt 41  Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40  ,Interrupt 40  Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47  ,Interrupt 47  Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46  ,Interrupt 46  Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45  ,Interrupt 45  Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44  ,Interrupt 44  Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51  ,Interrupt 51  Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50  ,Interrupt 50  Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49  ,Interrupt 49  Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48  ,Interrupt 48  Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55  ,Interrupt 55  Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54  ,Interrupt 54  Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53  ,Interrupt 53  Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52  ,Interrupt 52  Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59  ,Interrupt 59  Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58  ,Interrupt 58  Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57  ,Interrupt 57  Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56  ,Interrupt 56  Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63  ,Interrupt 63  Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62  ,Interrupt 62  Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61  ,Interrupt 61  Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60  ,Interrupt 60  Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67  ,Interrupt 67  Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66  ,Interrupt 66  Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65  ,Interrupt 65  Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64  ,Interrupt 64  Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71  ,Interrupt 71  Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70  ,Interrupt 70  Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69  ,Interrupt 69  Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68  ,Interrupt 68  Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75  ,Interrupt 75  Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74  ,Interrupt 74  Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73  ,Interrupt 73  Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72  ,Interrupt 72  Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79  ,Interrupt 79  Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78  ,Interrupt 78  Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77  ,Interrupt 77  Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76  ,Interrupt 76  Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83  ,Interrupt 83  Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82  ,Interrupt 82  Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81  ,Interrupt 81  Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80  ,Interrupt 80  Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87  ,Interrupt 87  Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86  ,Interrupt 86  Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85  ,Interrupt 85  Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84  ,Interrupt 84  Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91  ,Interrupt 91  Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90  ,Interrupt 90  Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89  ,Interrupt 89  Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88  ,Interrupt 88  Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95  ,Interrupt 95  Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94  ,Interrupt 94  Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93  ,Interrupt 93  Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92  ,Interrupt 92  Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99  ,Interrupt 99  Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98  ,Interrupt 98  Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97  ,Interrupt 97  Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96  ,Interrupt 96  Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
line.long 0x80 "IPR32,Interrupt Priority Register"
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
hexmask.long.byte 0x80 16.--23. 1. "  PRI_130 ,Interrupt 130 Priority"
hexmask.long.byte 0x80 8.--15. 1. "  PRI_129 ,Interrupt 129 Priority"
hexmask.long.byte 0x80 0.--7. 1. "  PRI_128 ,Interrupt 128 Priority"
line.long 0x84 "IPR33,Interrupt Priority Register"
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
hexmask.long.byte 0x84 16.--23. 1. "  PRI_134 ,Interrupt 134 Priority"
hexmask.long.byte 0x84 8.--15. 1. "  PRI_133 ,Interrupt 133 Priority"
hexmask.long.byte 0x84 0.--7. 1. "  PRI_132 ,Interrupt 132 Priority"
line.long 0x88 "IPR34,Interrupt Priority Register"
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
hexmask.long.byte 0x88 16.--23. 1. "  PRI_138 ,Interrupt 138 Priority"
hexmask.long.byte 0x88 8.--15. 1. "  PRI_137 ,Interrupt 137 Priority"
hexmask.long.byte 0x88 0.--7. 1. "  PRI_136 ,Interrupt 136 Priority"
line.long 0x8C "IPR35,Interrupt Priority Register"
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
hexmask.long.byte 0x8C 16.--23. 1. "  PRI_142 ,Interrupt 142 Priority"
hexmask.long.byte 0x8C 8.--15. 1. "  PRI_141 ,Interrupt 141 Priority"
hexmask.long.byte 0x8C 0.--7. 1. "  PRI_140 ,Interrupt 140 Priority"
line.long 0x90 "IPR36,Interrupt Priority Register"
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
hexmask.long.byte 0x90 16.--23. 1. "  PRI_146 ,Interrupt 146 Priority"
hexmask.long.byte 0x90 8.--15. 1. "  PRI_145 ,Interrupt 145 Priority"
hexmask.long.byte 0x90 0.--7. 1. "  PRI_144 ,Interrupt 144 Priority"
line.long 0x94 "IPR37,Interrupt Priority Register"
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
hexmask.long.byte 0x94 16.--23. 1. "  PRI_150 ,Interrupt 150 Priority"
hexmask.long.byte 0x94 8.--15. 1. "  PRI_149 ,Interrupt 149 Priority"
hexmask.long.byte 0x94 0.--7. 1. "  PRI_148 ,Interrupt 148 Priority"
line.long 0x98 "IPR38,Interrupt Priority Register"
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
hexmask.long.byte 0x98 16.--23. 1. "  PRI_154 ,Interrupt 154 Priority"
hexmask.long.byte 0x98 8.--15. 1. "  PRI_153 ,Interrupt 153 Priority"
hexmask.long.byte 0x98 0.--7. 1. "  PRI_152 ,Interrupt 152 Priority"
line.long 0x9C "IPR39,Interrupt Priority Register"
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
hexmask.long.byte 0x9C 16.--23. 1. "  PRI_158 ,Interrupt 158 Priority"
hexmask.long.byte 0x9C 8.--15. 1. "  PRI_157 ,Interrupt 157 Priority"
hexmask.long.byte 0x9C 0.--7. 1. "  PRI_156 ,Interrupt 156 Priority"
line.long 0xA0 "IPR40,Interrupt Priority Register"
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
hexmask.long.byte 0xA0 16.--23. 1. "  PRI_162 ,Interrupt 162 Priority"
hexmask.long.byte 0xA0 8.--15. 1. "  PRI_161 ,Interrupt 161 Priority"
hexmask.long.byte 0xA0 0.--7. 1. "  PRI_160 ,Interrupt 160 Priority"
line.long 0xA4 "IPR41,Interrupt Priority Register"
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
hexmask.long.byte 0xA4 16.--23. 1. "  PRI_166 ,Interrupt 166 Priority"
hexmask.long.byte 0xA4 8.--15. 1. "  PRI_165 ,Interrupt 165 Priority"
hexmask.long.byte 0xA4 0.--7. 1. "  PRI_164 ,Interrupt 164 Priority"
line.long 0xA8 "IPR42,Interrupt Priority Register"
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
hexmask.long.byte 0xA8 16.--23. 1. "  PRI_170 ,Interrupt 170 Priority"
hexmask.long.byte 0xA8 8.--15. 1. "  PRI_169 ,Interrupt 169 Priority"
hexmask.long.byte 0xA8 0.--7. 1. "  PRI_168 ,Interrupt 168 Priority"
line.long 0xAC "IPR43,Interrupt Priority Register"
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
hexmask.long.byte 0xAC 16.--23. 1. "  PRI_174 ,Interrupt 174 Priority"
hexmask.long.byte 0xAC 8.--15. 1. "  PRI_173 ,Interrupt 173 Priority"
hexmask.long.byte 0xAC 0.--7. 1. "  PRI_172 ,Interrupt 172 Priority"
line.long 0xB0 "IPR44,Interrupt Priority Register"
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
hexmask.long.byte 0xB0 16.--23. 1. "  PRI_178 ,Interrupt 178 Priority"
hexmask.long.byte 0xB0 8.--15. 1. "  PRI_177 ,Interrupt 177 Priority"
hexmask.long.byte 0xB0 0.--7. 1. "  PRI_176 ,Interrupt 176 Priority"
line.long 0xB4 "IPR45,Interrupt Priority Register"
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
hexmask.long.byte 0xB4 16.--23. 1. "  PRI_182 ,Interrupt 182 Priority"
hexmask.long.byte 0xB4 8.--15. 1. "  PRI_181 ,Interrupt 181 Priority"
hexmask.long.byte 0xB4 0.--7. 1. "  PRI_180 ,Interrupt 180 Priority"
line.long 0xB8 "IPR46,Interrupt Priority Register"
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
hexmask.long.byte 0xB8 16.--23. 1. "  PRI_186 ,Interrupt 186 Priority"
hexmask.long.byte 0xB8 8.--15. 1. "  PRI_185 ,Interrupt 185 Priority"
hexmask.long.byte 0xB8 0.--7. 1. "  PRI_184 ,Interrupt 184 Priority"
line.long 0xBC "IPR47,Interrupt Priority Register"
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
hexmask.long.byte 0xBC 16.--23. 1. "  PRI_190 ,Interrupt 190 Priority"
hexmask.long.byte 0xBC 8.--15. 1. "  PRI_189 ,Interrupt 189 Priority"
hexmask.long.byte 0xBC 0.--7. 1. "  PRI_188 ,Interrupt 188 Priority"
line.long 0xC0 "IPR48,Interrupt Priority Register"
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
hexmask.long.byte 0xC0 16.--23. 1. "  PRI_194 ,Interrupt 194 Priority"
hexmask.long.byte 0xC0 8.--15. 1. "  PRI_193 ,Interrupt 193 Priority"
hexmask.long.byte 0xC0 0.--7. 1. "  PRI_192 ,Interrupt 192 Priority"
line.long 0xC4 "IPR49,Interrupt Priority Register"
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
hexmask.long.byte 0xC4 16.--23. 1. "  PRI_198 ,Interrupt 198 Priority"
hexmask.long.byte 0xC4 8.--15. 1. "  PRI_197 ,Interrupt 197 Priority"
hexmask.long.byte 0xC4 0.--7. 1. "  PRI_196 ,Interrupt 196 Priority"
line.long 0xC8 "IPR50,Interrupt Priority Register"
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
hexmask.long.byte 0xC8 16.--23. 1. "  PRI_202 ,Interrupt 202 Priority"
hexmask.long.byte 0xC8 8.--15. 1. "  PRI_201 ,Interrupt 201 Priority"
hexmask.long.byte 0xC8 0.--7. 1. "  PRI_200 ,Interrupt 200 Priority"
line.long 0xCC "IPR51,Interrupt Priority Register"
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
hexmask.long.byte 0xCC 16.--23. 1. "  PRI_206 ,Interrupt 206 Priority"
hexmask.long.byte 0xCC 8.--15. 1. "  PRI_205 ,Interrupt 205 Priority"
hexmask.long.byte 0xCC 0.--7. 1. "  PRI_204 ,Interrupt 204 Priority"
line.long 0xD0 "IPR52,Interrupt Priority Register"
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
hexmask.long.byte 0xD0 16.--23. 1. "  PRI_210 ,Interrupt 210 Priority"
hexmask.long.byte 0xD0 8.--15. 1. "  PRI_209 ,Interrupt 209 Priority"
hexmask.long.byte 0xD0 0.--7. 1. "  PRI_208 ,Interrupt 208 Priority"
line.long 0xD4 "IPR53,Interrupt Priority Register"
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
hexmask.long.byte 0xD4 16.--23. 1. "  PRI_214 ,Interrupt 214 Priority"
hexmask.long.byte 0xD4 8.--15. 1. "  PRI_213 ,Interrupt 213 Priority"
hexmask.long.byte 0xD4 0.--7. 1. "  PRI_212 ,Interrupt 212 Priority"
line.long 0xD8 "IPR54,Interrupt Priority Register"
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
hexmask.long.byte 0xD8 16.--23. 1. "  PRI_218 ,Interrupt 218 Priority"
hexmask.long.byte 0xD8 8.--15. 1. "  PRI_217 ,Interrupt 217 Priority"
hexmask.long.byte 0xD8 0.--7. 1. "  PRI_216 ,Interrupt 216 Priority"
line.long 0xDC "IPR55,Interrupt Priority Register"
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
hexmask.long.byte 0xDC 16.--23. 1. "  PRI_222 ,Interrupt 222 Priority"
hexmask.long.byte 0xDC 8.--15. 1. "  PRI_221 ,Interrupt 221 Priority"
hexmask.long.byte 0xDC 0.--7. 1. "  PRI_220 ,Interrupt 220 Priority"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
group.long 0x400++0xEF
line.long 0x0 "IPR0,Interrupt Priority Register"
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
hexmask.long.byte 0x0 16.--23. 1. "  PRI_2 ,Interrupt 2 Priority"
hexmask.long.byte 0x0 8.--15. 1. "  PRI_1 ,Interrupt 1 Priority"
hexmask.long.byte 0x0 0.--7. 1. "  PRI_0 ,Interrupt 0 Priority"
line.long 0x4 "IPR1,Interrupt Priority Register"
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
hexmask.long.byte 0x4 16.--23. 1. "  PRI_6 ,Interrupt 6 Priority"
hexmask.long.byte 0x4 8.--15. 1. "  PRI_5 ,Interrupt 5 Priority"
hexmask.long.byte 0x4 0.--7. 1. "  PRI_4 ,Interrupt 4 Priority"
line.long 0x8 "IPR2,Interrupt Priority Register"
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
hexmask.long.byte 0x8 16.--23. 1. "  PRI_10 ,Interrupt 10 Priority"
hexmask.long.byte 0x8 8.--15. 1. "  PRI_9 ,Interrupt 9 Priority"
hexmask.long.byte 0x8 0.--7. 1. "  PRI_8 ,Interrupt 8 Priority"
line.long 0xC "IPR3,Interrupt Priority Register"
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
hexmask.long.byte 0xC 16.--23. 1. "  PRI_14 ,Interrupt 14 Priority"
hexmask.long.byte 0xC 8.--15. 1. "  PRI_13 ,Interrupt 13 Priority"
hexmask.long.byte 0xC 0.--7. 1. "  PRI_12 ,Interrupt 12 Priority"
line.long 0x10 "IPR4,Interrupt Priority Register"
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
hexmask.long.byte 0x10 16.--23. 1. "  PRI_18 ,Interrupt 18 Priority"
hexmask.long.byte 0x10 8.--15. 1. "  PRI_17 ,Interrupt 17 Priority"
hexmask.long.byte 0x10 0.--7. 1. "  PRI_16 ,Interrupt 16 Priority"
line.long 0x14 "IPR5,Interrupt Priority Register"
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
hexmask.long.byte 0x14 16.--23. 1. "  PRI_22 ,Interrupt 22 Priority"
hexmask.long.byte 0x14 8.--15. 1. "  PRI_21 ,Interrupt 21 Priority"
hexmask.long.byte 0x14 0.--7. 1. "  PRI_20 ,Interrupt 20 Priority"
line.long 0x18 "IPR6,Interrupt Priority Register"
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
hexmask.long.byte 0x18 16.--23. 1. "  PRI_26 ,Interrupt 26 Priority"
hexmask.long.byte 0x18 8.--15. 1. "  PRI_25 ,Interrupt 25 Priority"
hexmask.long.byte 0x18 0.--7. 1. "  PRI_24 ,Interrupt 24 Priority"
line.long 0x1C "IPR7,Interrupt Priority Register"
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
hexmask.long.byte 0x1C 16.--23. 1. "  PRI_30 ,Interrupt 30 Priority"
hexmask.long.byte 0x1C 8.--15. 1. "  PRI_29 ,Interrupt 29 Priority"
hexmask.long.byte 0x1C 0.--7. 1. "  PRI_28 ,Interrupt 28 Priority"
line.long 0x20 "IPR8,Interrupt Priority Register"
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
hexmask.long.byte 0x20 16.--23. 1. "  PRI_34 ,Interrupt 34 Priority"
hexmask.long.byte 0x20 8.--15. 1. "  PRI_33 ,Interrupt 33 Priority"
hexmask.long.byte 0x20 0.--7. 1. "  PRI_32 ,Interrupt 32 Priority"
line.long 0x24 "IPR9,Interrupt Priority Register"
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
hexmask.long.byte 0x24 16.--23. 1. "  PRI_38 ,Interrupt 38 Priority"
hexmask.long.byte 0x24 8.--15. 1. "  PRI_37 ,Interrupt 37 Priority"
hexmask.long.byte 0x24 0.--7. 1. "  PRI_36 ,Interrupt 36 Priority"
line.long 0x28 "IPR10,Interrupt Priority Register"
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
hexmask.long.byte 0x28 16.--23. 1. "  PRI_42 ,Interrupt 42 Priority"
hexmask.long.byte 0x28 8.--15. 1. "  PRI_41 ,Interrupt 41 Priority"
hexmask.long.byte 0x28 0.--7. 1. "  PRI_40 ,Interrupt 40 Priority"
line.long 0x2C "IPR11,Interrupt Priority Register"
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
hexmask.long.byte 0x2C 16.--23. 1. "  PRI_46 ,Interrupt 46 Priority"
hexmask.long.byte 0x2C 8.--15. 1. "  PRI_45 ,Interrupt 45 Priority"
hexmask.long.byte 0x2C 0.--7. 1. "  PRI_44 ,Interrupt 44 Priority"
line.long 0x30 "IPR12,Interrupt Priority Register"
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
hexmask.long.byte 0x30 16.--23. 1. "  PRI_50 ,Interrupt 50 Priority"
hexmask.long.byte 0x30 8.--15. 1. "  PRI_49 ,Interrupt 49 Priority"
hexmask.long.byte 0x30 0.--7. 1. "  PRI_48 ,Interrupt 48 Priority"
line.long 0x34 "IPR13,Interrupt Priority Register"
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
hexmask.long.byte 0x34 16.--23. 1. "  PRI_54 ,Interrupt 54 Priority"
hexmask.long.byte 0x34 8.--15. 1. "  PRI_53 ,Interrupt 53 Priority"
hexmask.long.byte 0x34 0.--7. 1. "  PRI_52 ,Interrupt 52 Priority"
line.long 0x38 "IPR14,Interrupt Priority Register"
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
hexmask.long.byte 0x38 16.--23. 1. "  PRI_58 ,Interrupt 58 Priority"
hexmask.long.byte 0x38 8.--15. 1. "  PRI_57 ,Interrupt 57 Priority"
hexmask.long.byte 0x38 0.--7. 1. "  PRI_56 ,Interrupt 56 Priority"
line.long 0x3C "IPR15,Interrupt Priority Register"
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
hexmask.long.byte 0x3C 16.--23. 1. "  PRI_62 ,Interrupt 62 Priority"
hexmask.long.byte 0x3C 8.--15. 1. "  PRI_61 ,Interrupt 61 Priority"
hexmask.long.byte 0x3C 0.--7. 1. "  PRI_60 ,Interrupt 60 Priority"
line.long 0x40 "IPR16,Interrupt Priority Register"
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
hexmask.long.byte 0x40 16.--23. 1. "  PRI_66 ,Interrupt 66 Priority"
hexmask.long.byte 0x40 8.--15. 1. "  PRI_65 ,Interrupt 65 Priority"
hexmask.long.byte 0x40 0.--7. 1. "  PRI_64 ,Interrupt 64 Priority"
line.long 0x44 "IPR17,Interrupt Priority Register"
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
hexmask.long.byte 0x44 16.--23. 1. "  PRI_70 ,Interrupt 70 Priority"
hexmask.long.byte 0x44 8.--15. 1. "  PRI_69 ,Interrupt 69 Priority"
hexmask.long.byte 0x44 0.--7. 1. "  PRI_68 ,Interrupt 68 Priority"
line.long 0x48 "IPR18,Interrupt Priority Register"
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
hexmask.long.byte 0x48 16.--23. 1. "  PRI_74 ,Interrupt 74 Priority"
hexmask.long.byte 0x48 8.--15. 1. "  PRI_73 ,Interrupt 73 Priority"
hexmask.long.byte 0x48 0.--7. 1. "  PRI_72 ,Interrupt 72 Priority"
line.long 0x4C "IPR19,Interrupt Priority Register"
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
hexmask.long.byte 0x4C 16.--23. 1. "  PRI_78 ,Interrupt 78 Priority"
hexmask.long.byte 0x4C 8.--15. 1. "  PRI_77 ,Interrupt 77 Priority"
hexmask.long.byte 0x4C 0.--7. 1. "  PRI_76 ,Interrupt 76 Priority"
line.long 0x50 "IPR20,Interrupt Priority Register"
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
hexmask.long.byte 0x50 16.--23. 1. "  PRI_82 ,Interrupt 82 Priority"
hexmask.long.byte 0x50 8.--15. 1. "  PRI_81 ,Interrupt 81 Priority"
hexmask.long.byte 0x50 0.--7. 1. "  PRI_80 ,Interrupt 80 Priority"
line.long 0x54 "IPR21,Interrupt Priority Register"
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
hexmask.long.byte 0x54 16.--23. 1. "  PRI_86 ,Interrupt 86 Priority"
hexmask.long.byte 0x54 8.--15. 1. "  PRI_85 ,Interrupt 85 Priority"
hexmask.long.byte 0x54 0.--7. 1. "  PRI_84 ,Interrupt 84 Priority"
line.long 0x58 "IPR22,Interrupt Priority Register"
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
hexmask.long.byte 0x58 16.--23. 1. "  PRI_90 ,Interrupt 90 Priority"
hexmask.long.byte 0x58 8.--15. 1. "  PRI_89 ,Interrupt 89 Priority"
hexmask.long.byte 0x58 0.--7. 1. "  PRI_88 ,Interrupt 88 Priority"
line.long 0x5C "IPR23,Interrupt Priority Register"
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
hexmask.long.byte 0x5C 16.--23. 1. "  PRI_94 ,Interrupt 94 Priority"
hexmask.long.byte 0x5C 8.--15. 1. "  PRI_93 ,Interrupt 93 Priority"
hexmask.long.byte 0x5C 0.--7. 1. "  PRI_92 ,Interrupt 92 Priority"
line.long 0x60 "IPR24,Interrupt Priority Register"
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
hexmask.long.byte 0x60 16.--23. 1. "  PRI_98 ,Interrupt 98 Priority"
hexmask.long.byte 0x60 8.--15. 1. "  PRI_97 ,Interrupt 97 Priority"
hexmask.long.byte 0x60 0.--7. 1. "  PRI_96 ,Interrupt 96 Priority"
line.long 0x64 "IPR25,Interrupt Priority Register"
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
hexmask.long.byte 0x64 16.--23. 1. "  PRI_102 ,Interrupt 102 Priority"
hexmask.long.byte 0x64 8.--15. 1. "  PRI_101 ,Interrupt 101 Priority"
hexmask.long.byte 0x64 0.--7. 1. "  PRI_100 ,Interrupt 100 Priority"
line.long 0x68 "IPR26,Interrupt Priority Register"
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
hexmask.long.byte 0x68 16.--23. 1. "  PRI_106 ,Interrupt 106 Priority"
hexmask.long.byte 0x68 8.--15. 1. "  PRI_105 ,Interrupt 105 Priority"
hexmask.long.byte 0x68 0.--7. 1. "  PRI_104 ,Interrupt 104 Priority"
line.long 0x6C "IPR27,Interrupt Priority Register"
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
hexmask.long.byte 0x6C 16.--23. 1. "  PRI_110 ,Interrupt 110 Priority"
hexmask.long.byte 0x6C 8.--15. 1. "  PRI_109 ,Interrupt 109 Priority"
hexmask.long.byte 0x6C 0.--7. 1. "  PRI_108 ,Interrupt 108 Priority"
line.long 0x70 "IPR28,Interrupt Priority Register"
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
hexmask.long.byte 0x70 16.--23. 1. "  PRI_114 ,Interrupt 114 Priority"
hexmask.long.byte 0x70 8.--15. 1. "  PRI_113 ,Interrupt 113 Priority"
hexmask.long.byte 0x70 0.--7. 1. "  PRI_112 ,Interrupt 112 Priority"
line.long 0x74 "IPR29,Interrupt Priority Register"
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
hexmask.long.byte 0x74 16.--23. 1. "  PRI_118 ,Interrupt 118 Priority"
hexmask.long.byte 0x74 8.--15. 1. "  PRI_117 ,Interrupt 117 Priority"
hexmask.long.byte 0x74 0.--7. 1. "  PRI_116 ,Interrupt 116 Priority"
line.long 0x78 "IPR30,Interrupt Priority Register"
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
hexmask.long.byte 0x78 16.--23. 1. "  PRI_122 ,Interrupt 122 Priority"
hexmask.long.byte 0x78 8.--15. 1. "  PRI_121 ,Interrupt 121 Priority"
hexmask.long.byte 0x78 0.--7. 1. "  PRI_120 ,Interrupt 120 Priority"
line.long 0x7C "IPR31,Interrupt Priority Register"
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
hexmask.long.byte 0x7C 16.--23. 1. "  PRI_126 ,Interrupt 126 Priority"
hexmask.long.byte 0x7C 8.--15. 1. "  PRI_125 ,Interrupt 125 Priority"
hexmask.long.byte 0x7C 0.--7. 1. "  PRI_124 ,Interrupt 124 Priority"
line.long 0x80 "IPR32,Interrupt Priority Register"
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
hexmask.long.byte 0x80 16.--23. 1. "  PRI_130 ,Interrupt 130 Priority"
hexmask.long.byte 0x80 8.--15. 1. "  PRI_129 ,Interrupt 129 Priority"
hexmask.long.byte 0x80 0.--7. 1. "  PRI_128 ,Interrupt 128 Priority"
line.long 0x84 "IPR33,Interrupt Priority Register"
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
hexmask.long.byte 0x84 16.--23. 1. "  PRI_134 ,Interrupt 134 Priority"
hexmask.long.byte 0x84 8.--15. 1. "  PRI_133 ,Interrupt 133 Priority"
hexmask.long.byte 0x84 0.--7. 1. "  PRI_132 ,Interrupt 132 Priority"
line.long 0x88 "IPR34,Interrupt Priority Register"
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
hexmask.long.byte 0x88 16.--23. 1. "  PRI_138 ,Interrupt 138 Priority"
hexmask.long.byte 0x88 8.--15. 1. "  PRI_137 ,Interrupt 137 Priority"
hexmask.long.byte 0x88 0.--7. 1. "  PRI_136 ,Interrupt 136 Priority"
line.long 0x8C "IPR35,Interrupt Priority Register"
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
hexmask.long.byte 0x8C 16.--23. 1. "  PRI_142 ,Interrupt 142 Priority"
hexmask.long.byte 0x8C 8.--15. 1. "  PRI_141 ,Interrupt 141 Priority"
hexmask.long.byte 0x8C 0.--7. 1. "  PRI_140 ,Interrupt 140 Priority"
line.long 0x90 "IPR36,Interrupt Priority Register"
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
hexmask.long.byte 0x90 16.--23. 1. "  PRI_146 ,Interrupt 146 Priority"
hexmask.long.byte 0x90 8.--15. 1. "  PRI_145 ,Interrupt 145 Priority"
hexmask.long.byte 0x90 0.--7. 1. "  PRI_144 ,Interrupt 144 Priority"
line.long 0x94 "IPR37,Interrupt Priority Register"
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
hexmask.long.byte 0x94 16.--23. 1. "  PRI_150 ,Interrupt 150 Priority"
hexmask.long.byte 0x94 8.--15. 1. "  PRI_149 ,Interrupt 149 Priority"
hexmask.long.byte 0x94 0.--7. 1. "  PRI_148 ,Interrupt 148 Priority"
line.long 0x98 "IPR38,Interrupt Priority Register"
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
hexmask.long.byte 0x98 16.--23. 1. "  PRI_154 ,Interrupt 154 Priority"
hexmask.long.byte 0x98 8.--15. 1. "  PRI_153 ,Interrupt 153 Priority"
hexmask.long.byte 0x98 0.--7. 1. "  PRI_152 ,Interrupt 152 Priority"
line.long 0x9C "IPR39,Interrupt Priority Register"
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
hexmask.long.byte 0x9C 16.--23. 1. "  PRI_158 ,Interrupt 158 Priority"
hexmask.long.byte 0x9C 8.--15. 1. "  PRI_157 ,Interrupt 157 Priority"
hexmask.long.byte 0x9C 0.--7. 1. "  PRI_156 ,Interrupt 156 Priority"
line.long 0xA0 "IPR40,Interrupt Priority Register"
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
hexmask.long.byte 0xA0 16.--23. 1. "  PRI_162 ,Interrupt 162 Priority"
hexmask.long.byte 0xA0 8.--15. 1. "  PRI_161 ,Interrupt 161 Priority"
hexmask.long.byte 0xA0 0.--7. 1. "  PRI_160 ,Interrupt 160 Priority"
line.long 0xA4 "IPR41,Interrupt Priority Register"
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
hexmask.long.byte 0xA4 16.--23. 1. "  PRI_166 ,Interrupt 166 Priority"
hexmask.long.byte 0xA4 8.--15. 1. "  PRI_165 ,Interrupt 165 Priority"
hexmask.long.byte 0xA4 0.--7. 1. "  PRI_164 ,Interrupt 164 Priority"
line.long 0xA8 "IPR42,Interrupt Priority Register"
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
hexmask.long.byte 0xA8 16.--23. 1. "  PRI_170 ,Interrupt 170 Priority"
hexmask.long.byte 0xA8 8.--15. 1. "  PRI_169 ,Interrupt 169 Priority"
hexmask.long.byte 0xA8 0.--7. 1. "  PRI_168 ,Interrupt 168 Priority"
line.long 0xAC "IPR43,Interrupt Priority Register"
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
hexmask.long.byte 0xAC 16.--23. 1. "  PRI_174 ,Interrupt 174 Priority"
hexmask.long.byte 0xAC 8.--15. 1. "  PRI_173 ,Interrupt 173 Priority"
hexmask.long.byte 0xAC 0.--7. 1. "  PRI_172 ,Interrupt 172 Priority"
line.long 0xB0 "IPR44,Interrupt Priority Register"
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
hexmask.long.byte 0xB0 16.--23. 1. "  PRI_178 ,Interrupt 178 Priority"
hexmask.long.byte 0xB0 8.--15. 1. "  PRI_177 ,Interrupt 177 Priority"
hexmask.long.byte 0xB0 0.--7. 1. "  PRI_176 ,Interrupt 176 Priority"
line.long 0xB4 "IPR45,Interrupt Priority Register"
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
hexmask.long.byte 0xB4 16.--23. 1. "  PRI_182 ,Interrupt 182 Priority"
hexmask.long.byte 0xB4 8.--15. 1. "  PRI_181 ,Interrupt 181 Priority"
hexmask.long.byte 0xB4 0.--7. 1. "  PRI_180 ,Interrupt 180 Priority"
line.long 0xB8 "IPR46,Interrupt Priority Register"
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
hexmask.long.byte 0xB8 16.--23. 1. "  PRI_186 ,Interrupt 186 Priority"
hexmask.long.byte 0xB8 8.--15. 1. "  PRI_185 ,Interrupt 185 Priority"
hexmask.long.byte 0xB8 0.--7. 1. "  PRI_184 ,Interrupt 184 Priority"
line.long 0xBC "IPR47,Interrupt Priority Register"
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
hexmask.long.byte 0xBC 16.--23. 1. "  PRI_190 ,Interrupt 190 Priority"
hexmask.long.byte 0xBC 8.--15. 1. "  PRI_189 ,Interrupt 189 Priority"
hexmask.long.byte 0xBC 0.--7. 1. "  PRI_188 ,Interrupt 188 Priority"
line.long 0xC0 "IPR48,Interrupt Priority Register"
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
hexmask.long.byte 0xC0 16.--23. 1. "  PRI_194 ,Interrupt 194 Priority"
hexmask.long.byte 0xC0 8.--15. 1. "  PRI_193 ,Interrupt 193 Priority"
hexmask.long.byte 0xC0 0.--7. 1. "  PRI_192 ,Interrupt 192 Priority"
line.long 0xC4 "IPR49,Interrupt Priority Register"
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
hexmask.long.byte 0xC4 16.--23. 1. "  PRI_198 ,Interrupt 198 Priority"
hexmask.long.byte 0xC4 8.--15. 1. "  PRI_197 ,Interrupt 197 Priority"
hexmask.long.byte 0xC4 0.--7. 1. "  PRI_196 ,Interrupt 196 Priority"
line.long 0xC8 "IPR50,Interrupt Priority Register"
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
hexmask.long.byte 0xC8 16.--23. 1. "  PRI_202 ,Interrupt 202 Priority"
hexmask.long.byte 0xC8 8.--15. 1. "  PRI_201 ,Interrupt 201 Priority"
hexmask.long.byte 0xC8 0.--7. 1. "  PRI_200 ,Interrupt 200 Priority"
line.long 0xCC "IPR51,Interrupt Priority Register"
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
hexmask.long.byte 0xCC 16.--23. 1. "  PRI_206 ,Interrupt 206 Priority"
hexmask.long.byte 0xCC 8.--15. 1. "  PRI_205 ,Interrupt 205 Priority"
hexmask.long.byte 0xCC 0.--7. 1. "  PRI_204 ,Interrupt 204 Priority"
line.long 0xD0 "IPR52,Interrupt Priority Register"
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
hexmask.long.byte 0xD0 16.--23. 1. "  PRI_210 ,Interrupt 210 Priority"
hexmask.long.byte 0xD0 8.--15. 1. "  PRI_209 ,Interrupt 209 Priority"
hexmask.long.byte 0xD0 0.--7. 1. "  PRI_208 ,Interrupt 208 Priority"
line.long 0xD4 "IPR53,Interrupt Priority Register"
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
hexmask.long.byte 0xD4 16.--23. 1. "  PRI_214 ,Interrupt 214 Priority"
hexmask.long.byte 0xD4 8.--15. 1. "  PRI_213 ,Interrupt 213 Priority"
hexmask.long.byte 0xD4 0.--7. 1. "  PRI_212 ,Interrupt 212 Priority"
line.long 0xD8 "IPR54,Interrupt Priority Register"
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
hexmask.long.byte 0xD8 16.--23. 1. "  PRI_218 ,Interrupt 218 Priority"
hexmask.long.byte 0xD8 8.--15. 1. "  PRI_217 ,Interrupt 217 Priority"
hexmask.long.byte 0xD8 0.--7. 1. "  PRI_216 ,Interrupt 216 Priority"
line.long 0xDC "IPR55,Interrupt Priority Register"
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
hexmask.long.byte 0xDC 16.--23. 1. "  PRI_222 ,Interrupt 222 Priority"
hexmask.long.byte 0xDC 8.--15. 1. "  PRI_221 ,Interrupt 221 Priority"
hexmask.long.byte 0xDC 0.--7. 1. "  PRI_220 ,Interrupt 220 Priority"
line.long 0xE0 "IPR56,Interrupt Priority Register"
hexmask.long.byte 0xE0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority"
hexmask.long.byte 0xE0 16.--23. 1. "  PRI_226 ,Interrupt 226 Priority"
hexmask.long.byte 0xE0 8.--15. 1. "  PRI_225 ,Interrupt 225 Priority"
hexmask.long.byte 0xE0 0.--7. 1. "  PRI_224 ,Interrupt 224 Priority"
line.long 0xE4 "IPR57,Interrupt Priority Register"
hexmask.long.byte 0xE4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority"
hexmask.long.byte 0xE4 16.--23. 1. "  PRI_230 ,Interrupt 230 Priority"
hexmask.long.byte 0xE4 8.--15. 1. "  PRI_229 ,Interrupt 229 Priority"
hexmask.long.byte 0xE4 0.--7. 1. "  PRI_228 ,Interrupt 228 Priority"
line.long 0xE8 "IPR58,Interrupt Priority Register"
hexmask.long.byte 0xE8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority"
hexmask.long.byte 0xE8 16.--23. 1. "  PRI_234 ,Interrupt 234 Priority"
hexmask.long.byte 0xE8 8.--15. 1. "  PRI_233 ,Interrupt 233 Priority"
hexmask.long.byte 0xE8 0.--7. 1. "  PRI_232 ,Interrupt 232 Priority"
line.long 0xEC "IPR59,Interrupt Priority Register"
hexmask.long.byte 0xEC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority"
hexmask.long.byte 0xEC 16.--23. 1. "  PRI_238 ,Interrupt 238 Priority"
hexmask.long.byte 0xEC 8.--15. 1. "  PRI_237 ,Interrupt 237 Priority"
hexmask.long.byte 0xEC 0.--7. 1. "  PRI_236 ,Interrupt 236 Priority"
else
hgroup.long 0x400++0xEF
hide.long 0x0 "IPR0,Interrupt Priority Register"
hide.long 0x4 "IPR1,Interrupt Priority Register"
hide.long 0x8 "IPR2,Interrupt Priority Register"
hide.long 0xC "IPR3,Interrupt Priority Register"
hide.long 0x10 "IPR4,Interrupt Priority Register"
hide.long 0x14 "IPR5,Interrupt Priority Register"
hide.long 0x18 "IPR6,Interrupt Priority Register"
hide.long 0x1C "IPR7,Interrupt Priority Register"
hide.long 0x20 "IPR8,Interrupt Priority Register"
hide.long 0x24 "IPR9,Interrupt Priority Register"
hide.long 0x28 "IPR10,Interrupt Priority Register"
hide.long 0x2C "IPR11,Interrupt Priority Register"
hide.long 0x30 "IPR12,Interrupt Priority Register"
hide.long 0x34 "IPR13,Interrupt Priority Register"
hide.long 0x38 "IPR14,Interrupt Priority Register"
hide.long 0x3C "IPR15,Interrupt Priority Register"
hide.long 0x40 "IPR16,Interrupt Priority Register"
hide.long 0x44 "IPR17,Interrupt Priority Register"
hide.long 0x48 "IPR18,Interrupt Priority Register"
hide.long 0x4C "IPR19,Interrupt Priority Register"
hide.long 0x50 "IPR20,Interrupt Priority Register"
hide.long 0x54 "IPR21,Interrupt Priority Register"
hide.long 0x58 "IPR22,Interrupt Priority Register"
hide.long 0x5C "IPR23,Interrupt Priority Register"
hide.long 0x60 "IPR24,Interrupt Priority Register"
hide.long 0x64 "IPR25,Interrupt Priority Register"
hide.long 0x68 "IPR26,Interrupt Priority Register"
hide.long 0x6C "IPR27,Interrupt Priority Register"
hide.long 0x70 "IPR28,Interrupt Priority Register"
hide.long 0x74 "IPR29,Interrupt Priority Register"
hide.long 0x78 "IPR30,Interrupt Priority Register"
hide.long 0x7C "IPR31,Interrupt Priority Register"
hide.long 0x80 "IPR32,Interrupt Priority Register"
hide.long 0x84 "IPR33,Interrupt Priority Register"
hide.long 0x88 "IPR34,Interrupt Priority Register"
hide.long 0x8C "IPR35,Interrupt Priority Register"
hide.long 0x90 "IPR36,Interrupt Priority Register"
hide.long 0x94 "IPR37,Interrupt Priority Register"
hide.long 0x98 "IPR38,Interrupt Priority Register"
hide.long 0x9C "IPR39,Interrupt Priority Register"
hide.long 0xA0 "IPR40,Interrupt Priority Register"
hide.long 0xA4 "IPR41,Interrupt Priority Register"
hide.long 0xA8 "IPR42,Interrupt Priority Register"
hide.long 0xAC "IPR43,Interrupt Priority Register"
hide.long 0xB0 "IPR44,Interrupt Priority Register"
hide.long 0xB4 "IPR45,Interrupt Priority Register"
hide.long 0xB8 "IPR46,Interrupt Priority Register"
hide.long 0xBC "IPR47,Interrupt Priority Register"
hide.long 0xC0 "IPR48,Interrupt Priority Register"
hide.long 0xC4 "IPR49,Interrupt Priority Register"
hide.long 0xC8 "IPR50,Interrupt Priority Register"
hide.long 0xCC "IPR51,Interrupt Priority Register"
hide.long 0xD0 "IPR52,Interrupt Priority Register"
hide.long 0xD4 "IPR53,Interrupt Priority Register"
hide.long 0xD8 "IPR54,Interrupt Priority Register"
hide.long 0xDC "IPR55,Interrupt Priority Register"
hide.long 0xE0 "IPR56,Interrupt Priority Register"
hide.long 0xE4 "IPR57,Interrupt Priority Register"
hide.long 0xE8 "IPR58,Interrupt Priority Register"
hide.long 0xEC "IPR59,Interrupt Priority Register"
endif
tree.end
width 0x0b
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
sif CORENAME()=="CORTEXM4F"
tree "Floating-point Unit (FPU)"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 8.
group.long 0xF34++0x0B
line.long 0x00 "FPCCR,Floating-Point Context Control Register"
bitfld.long 0x00 31. " ASPEN        ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled"
bitfld.long 0x00 30. "                      LSPEN    ,Enables lazy context save of FP state" "Disabled,Enabled"
bitfld.long 0x00 8. "       MONRDY  ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able"
textline "                 "
bitfld.long 0x00 6. " BFRDY        ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able"
bitfld.long 0x00 5. "                      MMRDY    ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able"
bitfld.long 0x00 4. "       HFRDY   ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able"
textline "                 "
bitfld.long 0x00 3. " THREAD       ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread"
bitfld.long 0x00 1. "                       USER     ,Indicates the privilege level of the software executing" "Privileged,Unprivileged"
bitfld.long 0x00 0. "   LSPACT  ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active"
line.long 0x04 "FPCAR,Floating-Point Context Address Register"
hexmask.long 0x04 3.--31. 0x8 " ADDRESS      ,The location of the unpopulated floating-point register space allocated on an exception stack frame"
line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register"
bitfld.long 0x08 26. " AHP          ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative"
bitfld.long 0x08 25. "                 DN       ,Default value for FPSCR.DN" "NaN operands,Any operation"
bitfld.long 0x08 24. "  FZ      ,Default value for FPSCR.FZ" "No Flush mode,Flush mode"
textline "                 "
bitfld.long 0x08 22.--23. " RMODE        ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero"
rgroup.long 0xF40++0x07
line.long 0x00 "MVFR0,Media and FP Feature Register 0"
bitfld.long 0x00 28.--31. " FPRNDMOD     ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..."
bitfld.long 0x00 24.--27. "                 SRTERR   ,Indicates the hardware support for FP short vectors" "Not supported,?..."
bitfld.long 0x00 20.--23. "  SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..."
textline "                 "
bitfld.long 0x00 16.--19. " DIV          ,Indicates the hardware support for FP divide operations" ",Supported,?..."
bitfld.long 0x00 12.--15. "                     FPEXTRP  ,Indicates whether the FP hardware implementation supports exception trapping" "Not supported,?..."
bitfld.long 0x00 8.--11. "  DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..."
textline "                 "
bitfld.long 0x00 4.--7. " SNGLPREC     ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..."
bitfld.long 0x00 0.--3. "                     A_SIMD   ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..."
line.long 0x04 "MVFR1,Media and FP Feature Register 1"
bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..."
bitfld.long 0x04 24.--27. "                     FP_HPFP  ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..."
textline "                 "
bitfld.long 0x04 4.--7. " D_NAN        ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..."
bitfld.long 0x04 0.--3. "               FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Full denorm. num. arit.,?..."
width 0xB
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
endif
tree "Debug"
tree "Core Debug"
sif COMPonent.AVAILABLE("COREDEBUG")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
width 7.
group.long 0xD30++0x03
line.long 0x00 "DFSR,Debug Fault Status Register"
eventfld.long 0x00 4. " EXTERNAL     ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated"
eventfld.long 0x00 3. "  VCATCH     ,Indicates triggering of a Vector catch" "Not triggered,Triggered"
eventfld.long 0x00 2. "  DWTTRAP    ,Indicates a debug event generated by the DWT" "Not generated,Generated"
newline
eventfld.long 0x00 1. " BKPT         ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated"
eventfld.long 0x00 0. "  HALTED     ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated"
newline
hgroup.long 0xDF0++0x03
hide.long 0x00 "DHCSR,Debug Halting Control and Status Register"
in
newline
wgroup.long 0xDF4++0x03
line.long 0x00 "DCRSR,Debug Core Register Selector Register"
bitfld.long 0x00 16. " REGWNR       ,Register Read/Write" "Read,Write"
hexmask.long.byte 0x00 0.--6. 1. "          REGSEL     ,Specifies the ARM core register or special-purpose register or Floating-point extension register"
group.long 0xDF8++0x03
line.long 0x00 "DCRDR,Debug Core Register Data Register"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000)
group.long 0xDFC++0x03
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
bitfld.long 0x00 24. " TRCENA       ,Global enable for all DWT and ITM features" "Disabled,Enabled"
bitfld.long 0x00 19. "       MON_REQ    ,DebugMonitor semaphore bit" "0,1"
bitfld.long 0x00 18. "              MON_STEP   ,Setting this bit to 1 makes the step request pending" "No step,Step"
newline
bitfld.long 0x00 17. " MON_PEND     ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
bitfld.long 0x00 16. "    MON_EN     ,Enable the DebugMonitor exception" "Disabled,Enabled"
bitfld.long 0x00 10. "       VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " VC_INTERR    ,Enable halting debug trap" "Disabled,Enabled"
bitfld.long 0x00 8. "       VC_BUSERR  ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
bitfld.long 0x00 7. "       VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " VC_CHKERR    ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
bitfld.long 0x00 5. "       VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
bitfld.long 0x00 4. "       VC_MMERR   ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
else
group.long 0xDFC++0x03
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
bitfld.long 0x00 24. " TRCENA       ,Global enable for all DWT and ITM features" "Disabled,Enabled"
bitfld.long 0x00 19. "       MON_REQ    ,DebugMonitor semaphore bit" "0,1"
newline
bitfld.long 0x00 17. " MON_PEND     ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
bitfld.long 0x00 16. "    MON_EN     ,Enable the DebugMonitor exception" "Disabled,Enabled"
bitfld.long 0x00 10. "       VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
newline
bitfld.long 0x00 9. " VC_INTERR    ,Enable halting debug trap" "Disabled,Enabled"
bitfld.long 0x00 8. "       VC_BUSERR  ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
bitfld.long 0x00 7. "       VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
newline
bitfld.long 0x00 6. " VC_CHKERR    ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
bitfld.long 0x00 5. "       VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
bitfld.long 0x00 4. "       VC_MMERR   ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
newline
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
endif
width 0x0B
else
newline
textline "COREDEBUG component base address not specified"
newline
endif
tree.end
tree "Flash Patch and Breakpoint Unit (FPB)"
sif COMPonent.AVAILABLE("FPB")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))
width 10.
group.long 0x00++0x07
line.long 0x00 "FP_CTRL,Flash Patch Control Register"
bitfld.long 0x00 28.--31. " REV     ,Flash Patch Breakpoint architecture revision" "Version 1,Version 2,?..."
rbitfld.long 0x00 4.--7. 12.--14. "     NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127"
bitfld.long 0x00 1. "  KEY   ,Key Field" "Low,High"
bitfld.long 0x00 0. "      ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled"
textline ""
line.long 0x04 "FP_REMAP,Flash Patch Remap Register"
bitfld.long 0x04 29. " RMPSPT  ,Indicates whether the FPB unit supports flash patch remap" "Not supported,SRAM region"
hexmask.long.tbyte 0x04 5.--28. 0x20 "               REMAP ,Remap Base Address Field"
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x8++0x03
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00)
group.long 0x8++0x03
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x8++0x03
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0xC++0x03
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00)
group.long 0xC++0x03
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0xC++0x03
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x10++0x03
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00)
group.long 0x10++0x03
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x10++0x03
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x14++0x03
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00)
group.long 0x14++0x03
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x14++0x03
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x18++0x03
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00)
group.long 0x18++0x03
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x18++0x03
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x1C++0x03
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00)
group.long 0x1C++0x03
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x1C++0x03
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x20++0x03
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00)
group.long 0x20++0x03
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x20++0x03
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
group.long 0x24++0x03
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
hexmask.long 0x00 2.--28. 0x04 "  COMP  ,Comparison Address"
bitfld.long 0x00 0. "  ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00)
group.long 0x24++0x03
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
bitfld.long 0x00 0. " BE      ,Enable bit for Breakpoint" "Disabled,Enabled"
else
group.long 0x24++0x03
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
hexmask.long 0x00 1.--31. 0x02 " BPADDR  ,Breakpoint address"
bitfld.long 0x00 0. "                    BE    ,Enable bit for Breakpoint" "Disabled,Enabled"
endif
endif
width 6.
tree "CoreSight Identification Registers"
rgroup.long 0xFE0++0x0F
line.long 0x00 "PID0,Peripheral ID0"
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
line.long 0x04 "PID1,Peripheral ID1"
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
hexmask.long.byte 0x04 0.--3. 1. "  Part_Num[11:8] ,Part Number bits[11:8]"
line.long 0x08 "PID2,Peripheral ID2"
hexmask.long.byte 0x08 4.--7. 1. " Revision      ,Revision"
bitfld.long 0x08 3. "  JEDEC          ,JEDEC assigned ID fields" "0,JEDEC"
hexmask.long.byte 0x08 0.--2. 1. "  JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
line.long 0x0c "PID3,Peripheral ID3"
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd        ,Minor revision field"
hexmask.long.byte 0x0C 0.--3. 1. "  CMB            ,Customer-modified block"
rgroup.long 0xFD0++0x03
line.long 0x00 "PID4,Peripheral Identification Register 4"
hexmask.long.byte 0x00 4.--7. 1. " Count         ,4KB count"
hexmask.long.byte 0x00 0.--3. 1. "  JEP106_CC      ,JEP106 continuation code"
rgroup.long 0xFF0++0x0F
line.long 0x00 "CID0,Component ID0 (Preamble)"
line.long 0x04 "CID1,Component ID1"
hexmask.long.byte 0x04 4.--7. 1. " CC            ,Component Class"
hexmask.long.byte 0x04 0.--3. 1. "  Preamble       ,Preamble"
line.long 0x08 "CID2,Component ID2"
line.long 0x0c "CID3,Component ID3"
tree.end
width 0xB
else
newline
textline "FPB component base address not specified"
newline
endif
tree.end
tree "Data Watchpoint and Trace Unit (DWT)"
sif COMPonent.AVAILABLE("DWT")
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))
width 15.
group.long 0x00++0x1B
line.long 0x00 "DWT_CTRL,Control Register"
rbitfld.long 0x00 28.--31. " NUMCOMP     ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 27. "             NOTRCPKT   ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported"
rbitfld.long 0x00 26. "  NOEXTTRIG   ,Shows whether the implementation includes external match signals" "Supported,Not supported"
textline "                        "
rbitfld.long 0x00 25. " NOCYCCNT    ,Shows whether the implementation supports a cycle counter" "Supported,Not supported"
rbitfld.long 0x00 24. "  NOPRFCNT   ,Shows whether the implementation supports the profiling counters" "Supported,Not supported"
bitfld.long 0x00 22. "  CYCEVTENA   ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 21. " FOLDEVTENA  ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled"
bitfld.long 0x00 20. "       LSUEVTENA  ,Enables generation of the LSU counter overflow event" "Disabled,Enabled"
bitfld.long 0x00 19. "       SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 18. " EXCEVTENA   ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled"
bitfld.long 0x00 17. "       CPIEVTENA  ,Enables generation of the CPI counter overflow event" "Disabled,Enabled"
bitfld.long 0x00 16. "       EXCTRCENA   ,Enables generation of exception trace" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 12. " PCSAMPLEENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled"
bitfld.long 0x00 10.--11. "       SYNCTAP    ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]"
bitfld.long 0x00 9. "     CYCTAP      ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]"
textline "                        "
bitfld.long 0x00 5.--8. " POSTINIT    ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 1.--4. "             POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "             CYCCNTENA   ,Enables CYCCNT" "Disabled,Enabled"
line.long 0x04 "DWT_CYCCNT,Cycle Count Register"
line.long 0x08 "DWT_CPICNT,CPI Count Register"
hexmask.long.byte 0x08 0.--7. 1. " CPICNT      ,The base CPI counter"
line.long 0x0c "DWT_EXCCNT,Exception Overhead Count Register"
hexmask.long.byte 0x0c 0.--7. 1. " EXCCNT      ,The exception overhead counter"
line.long 0x10 "DWT_SLEEPCNT,Sleep Count Register"
hexmask.long.byte 0x10 0.--7. 1. " SLEEPCNT    ,Sleep Counter"
line.long 0x14 "DWT_LSUCNT,LSU Count Register"
hexmask.long.byte 0x14 0.--7. 1. " LSUCNT      ,Load-store counter"
line.long 0x18 "DWT_FOLDCNT,Folded-instruction Count Register"
hexmask.long.byte 0x18 0.--7. 1. " FOLDCNT     ,Folded-instruction counter"
rgroup.long 0x1C++0x03
line.long 0x00 "DWT_PCSR,Program Counter Sample register"
textline "                        "
group.long 0x20++0x07
line.long 0x00 "DWT_COMP0,DWT Comparator Register 0"
line.long 0x04 "DWT_MASK0,DWT Mask Registers 0"
bitfld.long 0x04 0.--4. " MASK        ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x20)
group.long 0x28++0x03
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 7. " CYCMATCH    ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
bitfld.long 0x00 5. "    EMITRANGE  ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "       FUNCTION   ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x00)
group.long 0x28++0x03
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 7. " CYCMATCH    ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
bitfld.long 0x00 5. "    EMITRANGE  ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "       FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x180)==0x80)
group.long 0x28++0x03
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 7. " CYCMATCH    ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
bitfld.long 0x00 5. "    EMITRANGE  ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "       FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet,UNPREDICTABLE,UNPREDICTABLE,Generate watchpoint debug event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,CMPMATCH[N] event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
else
group.long 0x28++0x03
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 7. " CYCMATCH    ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
bitfld.long 0x00 5. "    EMITRANGE  ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "       FUNCTION   ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
endif
group.long (0x30)++0x07
line.long 0x00 "DWT_COMP1,DWT Comparator Register 1"
line.long 0x04 "DWT_MASK1,DWT Mask Registers 1"
bitfld.long 0x04 0.--4. " MASK        ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x20)
group.long (0x30+0x08)++0x03
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x00)
group.long (0x30+0x08)++0x03
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
else
group.long (0x30+0x08)++0x03
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
endif
group.long (0x40)++0x07
line.long 0x00 "DWT_COMP2,DWT Comparator Register 2"
line.long 0x04 "DWT_MASK2,DWT Mask Registers 2"
bitfld.long 0x04 0.--4. " MASK        ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x20)
group.long (0x40+0x08)++0x03
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x00)
group.long (0x40+0x08)++0x03
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
else
group.long (0x40+0x08)++0x03
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
endif
group.long (0x50)++0x07
line.long 0x00 "DWT_COMP3,DWT Comparator Register 3"
line.long 0x04 "DWT_MASK3,DWT Mask Registers 3"
bitfld.long 0x04 0.--4. " MASK        ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x20)
group.long (0x50+0x08)++0x03
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x00)
group.long (0x50+0x08)++0x03
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
else
group.long (0x50+0x08)++0x03
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
bitfld.long 0x00 24. " MATCHED     ,Comparator match" "No matched,Matched"
bitfld.long 0x00 16.--19. "  DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "             DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                        "
bitfld.long 0x00 10.--11. " DATAVSIZE   ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
bitfld.long 0x00 9. "    LNK1ENA    ,Supports use of a second linked comparator" "Not Supported,Supported"
bitfld.long 0x00 8. "  DATAVMATCH ,Data value compare" "Disabled,Enabled"
textline "                        "
bitfld.long 0x00 5. " EMITRANGE   ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "    FUNCTION   ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
endif
width 6.
tree "CoreSight Identification Registers"
rgroup.long 0xFE0++0x0F
line.long 0x00 "PID0,Peripheral ID0"
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
line.long 0x04 "PID1,Peripheral ID1"
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
hexmask.long.byte 0x04 0.--3. 1. "  Part_Num[11:8] ,Part Number bits[11:8]"
line.long 0x08 "PID2,Peripheral ID2"
hexmask.long.byte 0x08 4.--7. 1. " Revision      ,Revision"
bitfld.long 0x08 3. "  JEDEC          ,JEDEC assigned ID fields" "0,JEDEC"
hexmask.long.byte 0x08 0.--2. 1. "  JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
line.long 0x0c "PID3,Peripheral ID3"
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd        ,Minor revision field"
hexmask.long.byte 0x0C 0.--3. 1. "  CMB            ,Customer-modified block"
rgroup.long 0xFD0++0x03
line.long 0x00 "PID4,Peripheral Identification Register 4"
hexmask.long.byte 0x00 4.--7. 1. " Count         ,4KB count"
hexmask.long.byte 0x00 0.--3. 1. "  JEP106_CC      ,JEP106 continuation code"
rgroup.long 0xFF0++0x0F
line.long 0x00 "CID0,Component ID0 (Preamble)"
line.long 0x04 "CID1,Component ID1"
hexmask.long.byte 0x04 4.--7. 1. " CC            ,Component Class"
hexmask.long.byte 0x04 0.--3. 1. "  Preamble       ,Preamble"
line.long 0x08 "CID2,Component ID2"
line.long 0x0c "CID3,Component ID3"
tree.end
width 0x0B
else
newline
textline "DWT component base address not specified"
newline
endif
tree.end
tree.end
AUTOINDENT.POP
tree.end
autoindent.on center tree
tree "ADAVANCETIM (Advanced-control timers)"
base ad:0x40012C00
group.long 0x00++0x03
line.long 0x00 "CR1,control register 1"
bitfld.long 0x00 11. "UIFREMAP,UIF status bit remapping" "0,1"
bitfld.long 0x00 8.--9. "CKD,Clock division" "0,1,2,3"
newline
bitfld.long 0x00 7. "ARPE,Auto-reload preload enable" "0,1"
bitfld.long 0x00 5.--6. "CMS,Center-aligned mode selection" "0,1,2,3"
newline
bitfld.long 0x00 4. "DIR,Direction" "0,1"
bitfld.long 0x00 3. "OPM,One pulse mode" "0,1"
newline
bitfld.long 0x00 2. "URS,Update request source" "0,1"
bitfld.long 0x00 1. "UDIS,Update disable" "0,1"
newline
bitfld.long 0x00 0. "CEN,Counter enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,control register 2"
bitfld.long 0x00 20.--23. "MMS2,Master mode selection 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 18. "OIS6,Output Idle state 6 (OC6 output)" "0,1"
newline
bitfld.long 0x00 16. "OIS5,Output Idle state 5 (OC5 output)" "0,1"
bitfld.long 0x00 14. "OIS4,Output Idle state 4 (OC4 output)" "0,1"
newline
bitfld.long 0x00 13. "OIS3N,Output Idle state 3 (OC3N output)" "0,1"
bitfld.long 0x00 12. "OIS3,Output Idle state 3 (OC3 output)" "0,1"
newline
bitfld.long 0x00 11. "OIS2N,Output Idle state 2 (OC2N output)" "0,1"
bitfld.long 0x00 10. "OIS2,Output Idle state 2 (OC2 output)" "0,1"
newline
bitfld.long 0x00 9. "OIS1N,Output Idle state 1 (OC1N output)" "0,1"
bitfld.long 0x00 8. "OIS1,Output Idle state 1 (OC1 output)" "0,1"
newline
bitfld.long 0x00 7. "TI1S,TI1 selection" "0,1"
bitfld.long 0x00 4.--6. "MMS,Master mode selection" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3. "CCDS,Capture/compare DMA selection" "0,1"
bitfld.long 0x00 2. "CCUS,Capture/compare control update selection" "0,1"
newline
bitfld.long 0x00 0. "CCPC,Capture/compare preloaded control" "0,1"
group.long 0x08++0x03
line.long 0x00 "SMCR,slave mode control register"
bitfld.long 0x00 20.--21. "TS3_4,Trigger selection" "0,1,2,3"
bitfld.long 0x00 16. "SMS_3,Slave mode selection" "0,1"
newline
bitfld.long 0x00 15. "ETP,External trigger polarity" "0,1"
bitfld.long 0x00 14. "ECE,External clock enable" "0,1"
newline
bitfld.long 0x00 12.--13. "ETPS,External trigger prescaler" "0,1,2,3"
bitfld.long 0x00 8.--11. "ETF,External trigger filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 7. "MSM,Master/slave mode" "0,1"
bitfld.long 0x00 4.--6. "TS,Trigger selection" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3. "OCCS,OCREF clear selection" "0,1"
bitfld.long 0x00 0.--2. "SMS,Slave mode selection" "0,1,2,3,4,5,6,7"
group.long 0x0C++0x03
line.long 0x00 "DIER,DMA/interrupt enable register"
bitfld.long 0x00 14. "TDE,Trigger DMA request enable" "0,1"
bitfld.long 0x00 13. "COMDE,COM DMA request enable" "0,1"
newline
bitfld.long 0x00 12. "CC4DE,Capture/Compare 4 DMA request enable" "0,1"
bitfld.long 0x00 11. "CC3DE,Capture/Compare 3 DMA request enable" "0,1"
newline
bitfld.long 0x00 10. "CC2DE,Capture/Compare 2 DMA request enable" "0,1"
bitfld.long 0x00 9. "CC1DE,Capture/Compare 1 DMA request enable" "0,1"
newline
bitfld.long 0x00 8. "UDE,Update DMA request enable" "0,1"
bitfld.long 0x00 7. "BIE,Break interrupt enable" "0,1"
newline
bitfld.long 0x00 6. "TIE,Trigger interrupt enable" "0,1"
bitfld.long 0x00 5. "COMIE,COM interrupt enable" "0,1"
newline
bitfld.long 0x00 4. "CC4IE,Capture/Compare 4 interrupt enable" "0,1"
bitfld.long 0x00 3. "CC3IE,Capture/Compare 3 interrupt enable" "0,1"
newline
bitfld.long 0x00 2. "CC2IE,Capture/Compare 2 interrupt enable" "0,1"
bitfld.long 0x00 1. "CC1IE,Capture/Compare 1 interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "UIE,Update interrupt enable" "0,1"
group.long 0x10++0x03
line.long 0x00 "SR,status register"
bitfld.long 0x00 17. "CC6IF,Compare 6 interrupt flag" "0,1"
bitfld.long 0x00 16. "CC5IF,Compare 5 interrupt flag" "0,1"
newline
bitfld.long 0x00 13. "SBIF,System Break interrupt flag" "0,1"
bitfld.long 0x00 12. "CC4OF,Capture/Compare 4 overcapture flag" "0,1"
newline
bitfld.long 0x00 11. "CC3OF,Capture/Compare 3 overcapture flag" "0,1"
bitfld.long 0x00 10. "CC2OF,Capture/Compare 2 overcapture flag" "0,1"
newline
bitfld.long 0x00 9. "CC1OF,Capture/Compare 1 overcapture flag" "0,1"
bitfld.long 0x00 8. "B2IF,Break 2 interrupt flag" "0,1"
newline
bitfld.long 0x00 7. "BIF,Break interrupt flag" "0,1"
bitfld.long 0x00 6. "TIF,Trigger interrupt flag" "0,1"
newline
bitfld.long 0x00 5. "COMIF,COM interrupt flag" "0,1"
bitfld.long 0x00 4. "CC4IF,Capture/Compare 4 interrupt flag" "0,1"
newline
bitfld.long 0x00 3. "CC3IF,Capture/Compare 3 interrupt flag" "0,1"
bitfld.long 0x00 2. "CC2IF,Capture/Compare 2 interrupt flag" "0,1"
newline
bitfld.long 0x00 1. "CC1IF,Capture/Compare 1 interrupt flag" "0,1"
bitfld.long 0x00 0. "UIF,Update interrupt flag" "0,1"
wgroup.long 0x14++0x03
line.long 0x00 "EGR,event generation register"
bitfld.long 0x00 8. "B2G,Break 2 generation" "0,1"
bitfld.long 0x00 7. "BG,Break generation" "0,1"
newline
bitfld.long 0x00 6. "TG,Trigger generation" "0,1"
bitfld.long 0x00 5. "COM,Capture/Compare control update generation" "0,1"
newline
bitfld.long 0x00 4. "CC4G,Capture/Compare 4 generation" "0,1"
bitfld.long 0x00 3. "CC3G,Capture/Compare 3 generation" "0,1"
newline
bitfld.long 0x00 2. "CC2G,Capture/Compare 2 generation" "0,1"
bitfld.long 0x00 1. "CC1G,Capture/Compare 1 generation" "0,1"
newline
bitfld.long 0x00 0. "UG,Update generation" "0,1"
group.long 0x18++0x03
line.long 0x00 "CCMR1_Output,capture/compare mode register 1 (output mode)"
bitfld.long 0x00 24. "OC2M_3,Output Compare 2 mode - bit 3" "0,1"
bitfld.long 0x00 16. "OC1M_3,Output Compare 1 mode - bit 3" "0,1"
newline
bitfld.long 0x00 15. "OC2CE,Output compare 2 clear enable" "0,1"
bitfld.long 0x00 12.--14. "OC2M,Output compare 2 mode" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 11. "OC2PE,Output compare 2 preload enable" "0,1"
bitfld.long 0x00 10. "OC2FE,Output compare 2 fast enable" "0,1"
newline
bitfld.long 0x00 8.--9. "CC2S,Capture/Compare 2 selection" "0,1,2,3"
bitfld.long 0x00 7. "OC1CE,Output compare 1 clear enable" "0,1"
newline
bitfld.long 0x00 4.--6. "OC1M,Output compare 1 mode" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "OC1PE,Output compare 1 preload enable" "0,1"
newline
bitfld.long 0x00 2. "OC1FE,Output compare 1 fast enable" "0,1"
bitfld.long 0x00 0.--1. "CC1S,Capture/Compare 1 selection" "0,1,2,3"
group.long 0x18++0x03
line.long 0x00 "CCMR1_Input,capture/compare mode register 1 (input mode)"
bitfld.long 0x00 12.--15. "IC2F,Input capture 2 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--11. "IC2PSC,Input capture 2 prescaler" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "CC2S,Capture/compare 2 selection" "0,1,2,3"
bitfld.long 0x00 4.--7. "IC1F,Input capture 1 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2.--3. "IC1PSC,Input capture 1 prescaler" "0,1,2,3"
bitfld.long 0x00 0.--1. "CC1S,Capture/Compare 1 selection" "0,1,2,3"
group.long 0x1C++0x03
line.long 0x00 "CCMR2_Output,capture/compare mode register 2 (output mode)"
bitfld.long 0x00 24. "OC4M_3,Output Compare 4 mode - bit 3" "0,1"
bitfld.long 0x00 16. "OC3M_3,Output Compare 3 mode - bit 3" "0,1"
newline
bitfld.long 0x00 15. "OC4CE,Output compare 4 clear enable" "0,1"
bitfld.long 0x00 12.--14. "OC4M,Output compare 4 mode" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 11. "OC4PE,Output compare 4 preload enable" "0,1"
bitfld.long 0x00 10. "OC4FE,Output compare 4 fast enable" "0,1"
newline
bitfld.long 0x00 8.--9. "CC4S,Capture/Compare 4 selection" "0,1,2,3"
bitfld.long 0x00 7. "OC3CE,Output compare 3 clear enable" "0,1"
newline
bitfld.long 0x00 4.--6. "OC3M,Output compare 3 mode" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "OC3PE,Output compare 3 preload enable" "0,1"
newline
bitfld.long 0x00 2. "OC3FE,Output compare 3 fast enable" "0,1"
bitfld.long 0x00 0.--1. "CC3S,Capture/Compare 3 selection" "0,1,2,3"
group.long 0x1C++0x03
line.long 0x00 "CCMR2_Input,capture/compare mode register 2 (input mode)"
bitfld.long 0x00 12.--15. "IC4F,Input capture 4 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--11. "IC4PSC,Input capture 4 prescaler" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "CC4S,Capture/Compare 4 selection" "0,1,2,3"
bitfld.long 0x00 4.--7. "IC3F,Input capture 3 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2.--3. "IC3PSC,Input capture 3 prescaler" "0,1,2,3"
bitfld.long 0x00 0.--1. "CC3S,Capture/Compare 3 selection" "0,1,2,3"
group.long 0x20++0x03
line.long 0x00 "CCER,capture/compare enable register"
bitfld.long 0x00 21. "CC6P,CC6P" "0,1"
bitfld.long 0x00 20. "CC6E,CC6E" "0,1"
newline
bitfld.long 0x00 17. "CC5P,CC5P" "0,1"
bitfld.long 0x00 16. "CC5E,CC5E" "0,1"
newline
bitfld.long 0x00 13. "CC4P,CC4P" "0,1"
bitfld.long 0x00 12. "CC4E,CC4E" "0,1"
newline
bitfld.long 0x00 11. "CC3NP,CC3NP" "0,1"
bitfld.long 0x00 10. "CC3NE,CC3NE" "0,1"
newline
bitfld.long 0x00 9. "CC3P,CC3P" "0,1"
bitfld.long 0x00 8. "CC3E,CC3E" "0,1"
newline
bitfld.long 0x00 7. "CC2NP,CC2NP" "0,1"
bitfld.long 0x00 6. "CC2NE,CC2NE" "0,1"
newline
bitfld.long 0x00 5. "CC2P,CC2P" "0,1"
bitfld.long 0x00 4. "CC2E,CC2E" "0,1"
newline
bitfld.long 0x00 3. "CC1NP,CC1NP" "0,1"
bitfld.long 0x00 2. "CC1NE,CC1NE" "0,1"
newline
bitfld.long 0x00 1. "CC1P,CC1P" "0,1"
bitfld.long 0x00 0. "CC1E,CC1E" "0,1"
group.long 0x24++0x03
line.long 0x00 "CNT,counter"
rbitfld.long 0x00 31. "UIFCPY,UIF copy" "0,1"
hexmask.long.word 0x00 0.--15. 1. "CNT,CNT"
group.long 0x28++0x03
line.long 0x00 "PSC,prescaler"
hexmask.long.word 0x00 0.--15. 1. "PSC,Prescaler value"
group.long 0x2C++0x03
line.long 0x00 "ARR,auto-reload register"
hexmask.long.word 0x00 0.--15. 1. "ARR,Auto-reload value"
group.long 0x30++0x03
line.long 0x00 "RCR,repetition counter register"
hexmask.long.word 0x00 0.--15. 1. "REP,Repetition counter value"
group.long 0x34++0x03
line.long 0x00 "CCR1,capture/compare register 1"
hexmask.long.word 0x00 0.--15. 1. "CCR1,Capture/Compare 1 value"
group.long 0x38++0x03
line.long 0x00 "CCR2,capture/compare register 2"
hexmask.long.word 0x00 0.--15. 1. "CCR2,Capture/Compare 2 value"
group.long 0x3C++0x03
line.long 0x00 "CCR3,capture/compare register 3"
hexmask.long.word 0x00 0.--15. 1. "CCR3,Capture/Compare value"
group.long 0x40++0x03
line.long 0x00 "CCR4,capture/compare register 4"
hexmask.long.word 0x00 0.--15. 1. "CCR4,Capture/Compare value"
group.long 0x44++0x03
line.long 0x00 "BDTR,break and dead-time register"
bitfld.long 0x00 29. "BK2BID,Break2 bidirectional" "0,1"
bitfld.long 0x00 28. "BKBID,BKBID" "0,1"
newline
bitfld.long 0x00 27. "BK2DSRM,Break2 Disarm" "0,1"
bitfld.long 0x00 26. "BKDSRM,BKDSRM" "0,1"
newline
bitfld.long 0x00 25. "BK2P,Break 2 polarity" "0,1"
bitfld.long 0x00 24. "BK2E,Break 2 enable" "0,1"
newline
bitfld.long 0x00 20.--23. "BK2F,Break 2 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "BKF,Break filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "MOE,Main output enable" "0,1"
bitfld.long 0x00 14. "AOE,Automatic output enable" "0,1"
newline
bitfld.long 0x00 13. "BKP,Break polarity" "0,1"
bitfld.long 0x00 12. "BKE,Break enable" "0,1"
newline
bitfld.long 0x00 11. "OSSR,Off-state selection for Run mode" "0,1"
bitfld.long 0x00 10. "OSSI,Off-state selection for Idle mode" "0,1"
newline
bitfld.long 0x00 8.--9. "LOCK,Lock configuration" "0,1,2,3"
hexmask.long.byte 0x00 0.--7. 1. "DT,Dead-time generator setup"
group.long 0x48++0x03
line.long 0x00 "DCR,DMA control register"
bitfld.long 0x00 8.--12. "DBL,DMA burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "DBA,DMA base address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x4C++0x03
line.long 0x00 "DMAR,DMA address for full transfer"
hexmask.long.word 0x00 0.--15. 1. "DMAB,DMA register for burst accesses"
group.long 0x50++0x03
line.long 0x00 "OR1,option register 1"
bitfld.long 0x00 4. "TI1_RMP,Input Capture 1 remap" "0,1"
bitfld.long 0x00 0.--1. "TIM1_ETR_ADC1_RMP,TIM1_ETR_ADC1 remapping capability" "0,1,2,3"
group.long 0x54++0x03
line.long 0x00 "CCMR3OutputComparemode,capture/compare mode register 3"
bitfld.long 0x00 24. "OC6M_3,OC6M" "0,1"
bitfld.long 0x00 16. "OC5M_3,OC5M" "0,1"
newline
bitfld.long 0x00 15. "OC6CE,OC6CE" "0,1"
bitfld.long 0x00 12.--14. "OC6M,OC6M" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 11. "OC6PE,OC6PE" "0,1"
bitfld.long 0x00 10. "OC6FE,OC6FE" "0,1"
newline
bitfld.long 0x00 7. "OC5CE,OC5CE" "0,1"
bitfld.long 0x00 4.--6. "OC5M,OC5M" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3. "OC5PE,OC5PE" "0,1"
bitfld.long 0x00 2. "OC5FE,OC5FE" "0,1"
group.long 0x58++0x03
line.long 0x00 "CCR5,capture/compare register 5"
bitfld.long 0x00 31. "GC5C3,Group Channel 5 and Channel 3" "0,1"
bitfld.long 0x00 30. "GC5C2,Group Channel 5 and Channel 2" "0,1"
newline
bitfld.long 0x00 29. "GC5C1,Group Channel 5 and Channel 1" "0,1"
hexmask.long.word 0x00 0.--15. 1. "CCR5,Capture/Compare 5 value"
group.long 0x5C++0x03
line.long 0x00 "CCR6,capture/compare register 6"
hexmask.long.word 0x00 0.--15. 1. "CCR6,Capture/Compare 6 value"
group.long 0x60++0x03
line.long 0x00 "AF1,alternate function option register 1"
bitfld.long 0x00 14.--17. "ResETRSEL,ETR source selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "BKCMP2P,BRK COMP2 input polarity" "0,1"
newline
bitfld.long 0x00 10. "BKCMP1P,BRK COMP1 input polarity" "0,1"
bitfld.long 0x00 9. "BKINP,BRK BKIN input polarity" "0,1"
newline
bitfld.long 0x00 2. "BKCMP2E,BRK COMP2 enable" "0,1"
bitfld.long 0x00 1. "BKCMP1E,BRK COMP1 enable" "0,1"
newline
bitfld.long 0x00 0. "BKINE,BRK BKIN input enable" "0,1"
group.long 0x64++0x03
line.long 0x00 "AF2,Alternate function register 2"
bitfld.long 0x00 11. "BK2CMP2P,BRK2 COMP2 input polarity" "0,1"
bitfld.long 0x00 10. "BK2CMP1P,BRK2 COMP1 input polarity" "0,1"
newline
bitfld.long 0x00 9. "BK2INP,BRK2 BKIN2 input polarity" "0,1"
bitfld.long 0x00 2. "BK2CMP2E,BRK2 COMP2 enable" "0,1"
newline
bitfld.long 0x00 1. "BK2CMP1E,BRK2 COMP1 enable" "0,1"
bitfld.long 0x00 0. "BK2INE,BRK2 BKIN input enable" "0,1"
group.long 0x68++0x03
line.long 0x00 "TISEL,timer input selection register"
bitfld.long 0x00 24.--27. "TI4SEL,selects TI4[0] to TI4[15] input" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "TI3SEL,selects TI3[0] to TI3[15] input" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--11. "TI2SEL,selects TI2[0] to TI2[15] input" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "TI1SEL,selects TI1[0] to TI1[15] input" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "ADC (Analog to digital convertor)"
base ad:0x40012400
group.long 0x00++0x03
line.long 0x00 "ISR,ADC interrupt and status register"
bitfld.long 0x00 13. "CCRDY,CCRDY" "0,1"
bitfld.long 0x00 11. "EOCAL,EOCAL" "0,1"
newline
bitfld.long 0x00 9. "AWD3,AWD3" "0,1"
bitfld.long 0x00 8. "AWD2,AWD2" "0,1"
newline
bitfld.long 0x00 7. "AWD1,AWD1" "0,1"
bitfld.long 0x00 4. "OVR,OVR" "0,1"
newline
bitfld.long 0x00 3. "EOS,EOS" "0,1"
bitfld.long 0x00 2. "EOC,EOC" "0,1"
newline
bitfld.long 0x00 1. "EOSMP,EOSMP" "0,1"
bitfld.long 0x00 0. "ADRDY,ADRDY" "0,1"
group.long 0x04++0x03
line.long 0x00 "IER,ADC interrupt enable register"
bitfld.long 0x00 13. "CCRDYIE,CCRDYIE" "0,1"
bitfld.long 0x00 11. "EOCALIE,EOCALIE" "0,1"
newline
bitfld.long 0x00 9. "AWD3IE,AWD3IE" "0,1"
bitfld.long 0x00 8. "AWD2IE,AWD2IE" "0,1"
newline
bitfld.long 0x00 7. "AWD1IE,AWD1IE" "0,1"
bitfld.long 0x00 4. "OVRIE,OVRIE" "0,1"
newline
bitfld.long 0x00 3. "EOSIE,EOSIE" "0,1"
bitfld.long 0x00 2. "EOCIE,EOCIE" "0,1"
newline
bitfld.long 0x00 1. "EOSMPIE,EOSMPIE" "0,1"
bitfld.long 0x00 0. "ADRDYIE,ADRDYIE" "0,1"
group.long 0x08++0x03
line.long 0x00 "CR,ADC control register"
bitfld.long 0x00 31. "ADCAL,ADCAL" "0,1"
bitfld.long 0x00 28. "ADVREGEN,ADVREGEN" "0,1"
newline
bitfld.long 0x00 4. "ADSTP,ADSTP" "0,1"
bitfld.long 0x00 2. "ADSTART,ADSTART" "0,1"
newline
bitfld.long 0x00 1. "ADDIS,ADDIS" "0,1"
bitfld.long 0x00 0. "ADEN,ADEN" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CFGR1,ADC configuration register 1"
bitfld.long 0x00 26.--30. "AWD1CH,AWD1CH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "AWD1EN,AWD1EN" "0,1"
newline
bitfld.long 0x00 22. "AWD1SGL,AWD1SGL" "0,1"
bitfld.long 0x00 21. "CHSELRMOD,CHSELRMOD" "0,1"
newline
bitfld.long 0x00 16. "DISCEN,DISCEN" "0,1"
bitfld.long 0x00 15. "AUTOFF,AUTOFF" "0,1"
newline
bitfld.long 0x00 14. "WAIT,WAIT" "0,1"
bitfld.long 0x00 13. "CONT,CONT" "0,1"
newline
bitfld.long 0x00 12. "OVRMOD,OVRMOD" "0,1"
bitfld.long 0x00 10.--11. "EXTEN,EXTEN" "0,1,2,3"
newline
bitfld.long 0x00 6.--8. "EXTSEL,EXTSEL" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 5. "ALIGN,ALIGN" "0,1"
newline
bitfld.long 0x00 3.--4. "RES,RES" "0,1,2,3"
bitfld.long 0x00 2. "SCANDIR,SCANDIR" "0,1"
newline
bitfld.long 0x00 1. "DMACFG,DMACFG" "0,1"
bitfld.long 0x00 0. "DMAEN,DMAEN" "0,1"
group.long 0x10++0x03
line.long 0x00 "CFGR2,ADC configuration register 2"
bitfld.long 0x00 30.--31. "CKMODE,CKMODE" "0,1,2,3"
bitfld.long 0x00 29. "LFTRIG,LFTRIG" "0,1"
newline
bitfld.long 0x00 9. "TOVS,TOVS" "0,1"
bitfld.long 0x00 8. "OVSS3,OVSS3" "0,1"
newline
bitfld.long 0x00 7. "OVSS2,OVSS2" "0,1"
bitfld.long 0x00 6. "OVSS1,OVSS1" "0,1"
newline
bitfld.long 0x00 5. "OVSS0,OVSS0" "0,1"
bitfld.long 0x00 4. "OVSR2,OVSR2" "0,1"
newline
bitfld.long 0x00 3. "OVSR1,OVSR1" "0,1"
bitfld.long 0x00 2. "OVSR0,OVSR0" "0,1"
newline
bitfld.long 0x00 0. "OVSE,OVSE" "0,1"
group.long 0x14++0x03
line.long 0x00 "SMPR,ADC sampling time register"
hexmask.long.tbyte 0x00 8.--25. 1. "SMPSEL,SMPSEL"
bitfld.long 0x00 4.--6. "SMP2,SMP2" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "SMP1,SMP1" "0,1,2,3,4,5,6,7"
group.long 0x20++0x03
line.long 0x00 "AWD1TR,ADC watchdog threshold register"
hexmask.long.word 0x00 16.--27. 1. "HT1,HT1"
hexmask.long.word 0x00 0.--11. 1. "LT1,LT1"
group.long 0x24++0x03
line.long 0x00 "AWD2TR,ADC watchdog threshold register"
hexmask.long.word 0x00 16.--27. 1. "HT2,HT2"
hexmask.long.word 0x00 0.--11. 1. "LT2,LT2"
group.long 0x28++0x03
line.long 0x00 "CHSELR0,channel selection register"
hexmask.long.tbyte 0x00 0.--17. 1. "CHSEL,CHSEL"
group.long 0x28++0x03
line.long 0x00 "CHSELR1,channel selection register"
bitfld.long 0x00 28.--31. "SQ8,SQ8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "SQ7,SQ7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "SQ6,SQ6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "SQ5,SQ5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "SQ4,SQ4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "SQ3,SQ3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "SQ2,SQ2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "SQ1,SQ1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x2C++0x03
line.long 0x00 "AWD3TR,ADC watchdog threshold register"
hexmask.long.word 0x00 16.--27. 1. "HT3,HT3"
hexmask.long.word 0x00 0.--11. 1. "LT3,LT3"
rgroup.long 0x40++0x03
line.long 0x00 "DR,ADC data register"
hexmask.long.word 0x00 0.--15. 1. "DATA,DATA"
group.long 0xA0++0x03
line.long 0x00 "AWD2CR,ADC Analog Watchdog 2 Configuration register"
hexmask.long.tbyte 0x00 0.--17. 1. "AWD2CH,AWD2CH"
group.long 0xA4++0x03
line.long 0x00 "AWD3CR,ADC Analog Watchdog 3 Configuration register"
hexmask.long.tbyte 0x00 0.--17. 1. "AWD3CH,AWD3CH"
group.long 0xB4++0x03
line.long 0x00 "CALFACT,ADC Calibration factor"
hexmask.long.byte 0x00 0.--6. 1. "CALFACT,CALFACT"
group.long 0x308++0x03
line.long 0x00 "CCR,ADC common configuration register"
bitfld.long 0x00 24. "VBATEN,VBATEN" "0,1"
bitfld.long 0x00 23. "TSEN,TSEN" "0,1"
newline
bitfld.long 0x00 22. "VREFEN,VREFEN" "0,1"
bitfld.long 0x00 21. "PRESC3,PRESC3" "0,1"
newline
bitfld.long 0x00 20. "PRESC2,PRESC2" "0,1"
bitfld.long 0x00 19. "PRESC1,PRESC1" "0,1"
newline
bitfld.long 0x00 18. "PRESC0,PRESC0" "0,1"
tree.end
tree "AES (Advanced encryption standard hardware accelerator 1)"
base ad:0x58001800
group.long 0x00++0x03
line.long 0x00 "CR,control register"
bitfld.long 0x00 20.--23. "NPBLB,Number of padding bytes in last block of payload" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 18. "KEYSIZE,Key size selection" "0,1"
newline
bitfld.long 0x00 16. "CHMOD2,AES chaining mode Bit2" "0,1"
bitfld.long 0x00 13.--14. "GCMPH,Used only for GCM CCM and GMAC algorithms and has no effect when other algorithms are selected" "0,1,2,3"
newline
bitfld.long 0x00 12. "DMAOUTEN,Enable DMA management of data output phase" "0,1"
bitfld.long 0x00 11. "DMAINEN,Enable DMA management of data input phase" "0,1"
newline
bitfld.long 0x00 10. "ERRIE,Error interrupt enable" "0,1"
bitfld.long 0x00 9. "CCFIE,CCF flag interrupt enable" "0,1"
newline
bitfld.long 0x00 8. "ERRC,Error clear" "0,1"
bitfld.long 0x00 7. "CCFC,Computation Complete Flag Clear" "0,1"
newline
bitfld.long 0x00 5.--6. "CHMOD10,AES chaining mode Bit1 Bit0" "0,1,2,3"
bitfld.long 0x00 3.--4. "MODE,AES operating mode" "0,1,2,3"
newline
bitfld.long 0x00 1.--2. "DATATYPE,Data type selection (for data in and data out to/from the cryptographic block)" "0,1,2,3"
bitfld.long 0x00 0. "EN,AES enable" "0,1"
rgroup.long 0x04++0x03
line.long 0x00 "SR,status register"
bitfld.long 0x00 3. "BUSY,Busy flag" "0,1"
bitfld.long 0x00 2. "WRERR,Write error flag" "0,1"
newline
bitfld.long 0x00 1. "RDERR,Read error flag" "0,1"
bitfld.long 0x00 0. "CCF,Computation complete flag" "0,1"
group.long 0x08++0x03
line.long 0x00 "DINR,data input register"
hexmask.long 0x00 0.--31. 1. "AES_DINR,Data Input Register"
rgroup.long 0x0C++0x03
line.long 0x00 "DOUTR,data output register"
hexmask.long 0x00 0.--31. 1. "AES_DOUTR,Data output register"
wgroup.long 0x10++0x03
line.long 0x00 "KEYR0,key register 0"
hexmask.long 0x00 0.--31. 1. "AES_KEYR0,Data Output Register (LSB key [31:0])"
wgroup.long 0x14++0x03
line.long 0x00 "KEYR1,key register 1"
hexmask.long 0x00 0.--31. 1. "AES_KEYR1,AES key register (key [63:32])"
wgroup.long 0x18++0x03
line.long 0x00 "KEYR2,key register 2"
hexmask.long 0x00 0.--31. 1. "AES_KEYR2,AES key register (key [95:64])"
wgroup.long 0x1C++0x03
line.long 0x00 "KEYR3,key register 3"
hexmask.long 0x00 0.--31. 1. "AES_KEYR3,AES key register (MSB key [127:96])"
group.long 0x20++0x03
line.long 0x00 "IVR0,initialization vector register 0"
hexmask.long 0x00 0.--31. 1. "AES_IVR0,initialization vector register (LSB IVR [31:0])"
group.long 0x24++0x03
line.long 0x00 "IVR1,initialization vector register 1"
hexmask.long 0x00 0.--31. 1. "AES_IVR1,Initialization Vector Register (IVR [63:32])"
group.long 0x28++0x03
line.long 0x00 "IVR2,initialization vector register 2"
hexmask.long 0x00 0.--31. 1. "AES_IVR2,Initialization Vector Register (IVR [95:64])"
group.long 0x2C++0x03
line.long 0x00 "IVR3,initialization vector register 3"
hexmask.long 0x00 0.--31. 1. "AES_IVR3,Initialization Vector Register (MSB IVR [127:96])"
wgroup.long 0x30++0x03
line.long 0x00 "KEYR4,key register 4"
hexmask.long 0x00 0.--31. 1. "AES_KEYR4,AES key register (MSB key [159:128])"
wgroup.long 0x34++0x03
line.long 0x00 "KEYR5,key register 5"
hexmask.long 0x00 0.--31. 1. "AES_KEYR5,AES key register (MSB key [191:160])"
wgroup.long 0x38++0x03
line.long 0x00 "KEYR6,key register 6"
hexmask.long 0x00 0.--31. 1. "AES_KEYR6,AES key register (MSB key [223:192])"
wgroup.long 0x3C++0x03
line.long 0x00 "KEYR7,key register 7"
hexmask.long 0x00 0.--31. 1. "AES_KEYR7,AES key register (MSB key [255:224])"
group.long 0x40++0x03
line.long 0x00 "SUSP0R,AES suspend register 0"
hexmask.long 0x00 0.--31. 1. "AES_SUSP0R,AES suspend register 0"
group.long 0x44++0x03
line.long 0x00 "SUSP1R,AES suspend register 1"
hexmask.long 0x00 0.--31. 1. "AES_SUSP1R,AES suspend register 1"
group.long 0x48++0x03
line.long 0x00 "SUSP2R,AES suspend register 2"
hexmask.long 0x00 0.--31. 1. "AES_SUSP2R,AES suspend register 2"
group.long 0x4C++0x03
line.long 0x00 "SUSP3R,AES suspend register 3"
hexmask.long 0x00 0.--31. 1. "AES_SUSP3R,AES suspend register 3"
group.long 0x50++0x03
line.long 0x00 "SUSP4R,AES suspend register 4"
hexmask.long 0x00 0.--31. 1. "AES_SUSP4R,AES suspend register 4"
group.long 0x54++0x03
line.long 0x00 "SUSP5R,AES suspend register 5"
hexmask.long 0x00 0.--31. 1. "AES_SUSP5R,AES suspend register 5"
group.long 0x58++0x03
line.long 0x00 "SUSP6R,AES suspend register 6"
hexmask.long 0x00 0.--31. 1. "AES_SUSP6R,AES suspend register 6"
group.long 0x5C++0x03
line.long 0x00 "SUSP7R,AES suspend register 7"
hexmask.long 0x00 0.--31. 1. "AES_SUSP7R,AES suspend register 7"
tree.end
tree "COMP (Comparator)"
base ad:0x40010200
group.long 0x00++0x03
line.long 0x00 "COMP1_CSR,COMP1_CSR"
bitfld.long 0x00 31. "LOCK,COMP1_CSR register lock bit" "0,1"
rbitfld.long 0x00 30. "VALUE,Comparator 1 output status bit" "0,1"
newline
bitfld.long 0x00 25.--26. "INMESEL,comparator 1 input minus extended selection bits" "0,1,2,3"
bitfld.long 0x00 23. "SCALEN,Voltage scaler enable bit" "0,1"
newline
bitfld.long 0x00 22. "BRGEN,Scaler bridge enable" "0,1"
bitfld.long 0x00 18.--20. "BLANKING,Comparator 1 blanking source selection bits" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--17. "HYST,Comparator 1 hysteresis selection bits" "0,1,2,3"
bitfld.long 0x00 15. "POLARITY,Comparator 1 polarity selection bit" "0,1"
newline
bitfld.long 0x00 7.--8. "INPSEL,Comparator1 input plus selection bit" "0,1,2,3"
bitfld.long 0x00 4.--6. "INMSEL,Comparator 1 input minus selection bits" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 2.--3. "PWRMODE,Power Mode of the comparator 1" "0,1,2,3"
bitfld.long 0x00 0. "EN,Comparator 1 enable bit" "0,1"
group.long 0x04++0x03
line.long 0x00 "COMP2_CSR,COMP2_CSR"
bitfld.long 0x00 31. "LOCK,CSR register lock bit" "0,1"
rbitfld.long 0x00 30. "VALUE,Comparator 2 output status bit" "0,1"
newline
bitfld.long 0x00 25.--26. "INMESEL,comparator 2 input minus extended selection bits" "0,1,2,3"
bitfld.long 0x00 23. "SCALEN,Voltage scaler enable bit" "0,1"
newline
bitfld.long 0x00 22. "BRGEN,Scaler bridge enable" "0,1"
bitfld.long 0x00 18.--20. "BLANKING,Comparator 2 blanking source selection bits" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--17. "HYST,Comparator 2 hysteresis selection bits" "0,1,2,3"
bitfld.long 0x00 15. "POLARITY,Comparator 2 polarity selection bit" "0,1"
newline
bitfld.long 0x00 9. "WINMODE,Windows mode selection bit" "0,1"
bitfld.long 0x00 7.--8. "INPSEL,Comparator 1 input plus selection bit" "0,1,2,3"
newline
bitfld.long 0x00 4.--6. "INMSEL,Comparator 2 input minus selection bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--3. "PWRMODE,Power Mode of the comparator 2" "0,1,2,3"
newline
bitfld.long 0x00 0. "EN,Comparator 2 enable bit" "0,1"
tree.end
tree "CRC (Cyclic redundancy check calculation unit)"
base ad:0x40023000
group.long 0x00++0x03
line.long 0x00 "DR,Data register"
hexmask.long 0x00 0.--31. 1. "DR,Data register bits"
group.long 0x04++0x03
line.long 0x00 "IDR,Independent data register"
hexmask.long 0x00 0.--31. 1. "IDR,General-purpose 32-bit data register bits"
group.long 0x08++0x03
line.long 0x00 "CR,Control register"
bitfld.long 0x00 7. "REV_OUT,Reverse output data" "0,1"
bitfld.long 0x00 5.--6. "REV_IN,Reverse input data" "0,1,2,3"
newline
bitfld.long 0x00 3.--4. "POLYSIZE,Polynomial size" "0,1,2,3"
bitfld.long 0x00 0. "RESET,RESET bit" "0,1"
group.long 0x10++0x03
line.long 0x00 "INIT,Initial CRC value"
hexmask.long 0x00 0.--31. 1. "CRC_INIT,Programmable initial CRC value"
group.long 0x14++0x03
line.long 0x00 "POL,polynomial"
hexmask.long 0x00 0.--31. 1. "POL,Programmable polynomial"
tree.end
tree "DAC (Digital-to-analog converter)"
base ad:0x40007400
group.long 0x00++0x03
line.long 0x00 "CR,control register"
bitfld.long 0x00 14. "CEN1,DAC Channel 1 calibration enable" "0,1"
bitfld.long 0x00 13. "DMAUDRIE1,DAC channel1 DMA Underrun Interrupt enable" "0,1"
newline
bitfld.long 0x00 12. "DMAEN1,DAC channel1 DMA enable" "0,1"
bitfld.long 0x00 8.--11. "MAMP1,DAC channel1 mask/amplitude selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 6.--7. "WAVE1,DAC channel1 noise/triangle wave generation enable" "0,1,2,3"
bitfld.long 0x00 5. "TSEL13,DAC channel1 trigger selection" "0,1"
newline
bitfld.long 0x00 4. "TSEL12,TSEL12" "0,1"
bitfld.long 0x00 3. "TSEL11,TSEL11" "0,1"
newline
bitfld.long 0x00 2. "TSEL10,TSEL10" "0,1"
bitfld.long 0x00 1. "TEN1,DAC channel1 trigger enable" "0,1"
newline
bitfld.long 0x00 0. "EN1,DAC channel1 enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "SWTRGR,software trigger register"
bitfld.long 0x00 0. "SWTRIG1,DAC channel1 software trigger" "0,1"
group.long 0x08++0x03
line.long 0x00 "DHR12R1,channel1 12-bit right-aligned data holding register"
hexmask.long.word 0x00 0.--11. 1. "DACC1DHR,DAC channel1 12-bit right-aligned data"
group.long 0x0C++0x03
line.long 0x00 "DHR12L1,channel1 12-bit left aligned data holding register"
hexmask.long.word 0x00 4.--15. 1. "DACC1DHR,DAC channel1 12-bit left-aligned data"
group.long 0x10++0x03
line.long 0x00 "DHR8R1,channel1 8-bit right aligned data holding register"
hexmask.long.byte 0x00 0.--7. 1. "DACC1DHR,DAC channel1 8-bit right-aligned data"
group.long 0x20++0x03
line.long 0x00 "DHR12RD,Dual DAC 12-bit right-aligned data holding register"
hexmask.long.word 0x00 0.--11. 1. "DACC1DHR,DAC channel1 12-bit right-aligned data"
group.long 0x24++0x03
line.long 0x00 "DHR12LD,Dual DAC 12-bit left aligned data holding register"
hexmask.long.word 0x00 4.--15. 1. "DACC1DHR,DAC channel1 12-bit left-aligned data"
group.long 0x28++0x03
line.long 0x00 "DHR8RD,Dual DAC 8-bit right aligned data holding register"
hexmask.long.byte 0x00 0.--7. 1. "DACC1DHR,DAC channel1 8-bit right-aligned data"
rgroup.long 0x2C++0x03
line.long 0x00 "DOR1,DAC channel1 data output register"
hexmask.long.word 0x00 0.--11. 1. "DACC1DOR,DACC1DOR"
group.long 0x34++0x03
line.long 0x00 "SR,status register"
rbitfld.long 0x00 15. "BWST1,DAC Channel 1 busy writing sample time flag" "0,1"
rbitfld.long 0x00 14. "CAL_FLAG1,DAC Channel 1 calibration offset status" "0,1"
newline
bitfld.long 0x00 13. "DMAUDR1,DAC channel1 DMA underrun flag" "0,1"
group.long 0x38++0x03
line.long 0x00 "CCR,calibration control register"
bitfld.long 0x00 0.--4. "OTRIM1,DAC Channel 1 offset trimming value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x3C++0x03
line.long 0x00 "MCR,mode control register"
bitfld.long 0x00 0.--2. "MODE1,DAC Channel 1 mode" "0,1,2,3,4,5,6,7"
group.long 0x40++0x03
line.long 0x00 "SHSR1,Sample and Hold sample time register 1"
hexmask.long.word 0x00 0.--9. 1. "TSAMPLE1,DAC Channel 1 sample Time (only valid in Sample and Hold mode)"
group.long 0x48++0x03
line.long 0x00 "SHHR,Sample and Hold hold time register"
hexmask.long.word 0x00 0.--9. 1. "THOLD1,DAC Channel 1 hold Time (only valid in Sample and Hold mode)"
group.long 0x4C++0x03
line.long 0x00 "SHRR,Sample and Hold refresh time register"
hexmask.long.byte 0x00 0.--7. 1. "TREFRESH1,DAC Channel 1 refresh Time (only valid in Sample and Hold mode)"
tree.end
tree "DBGMCU (Microcontroller Debug Unit)"
base ad:0xE0042000
rgroup.long 0x00++0x03
line.long 0x00 "IDCODER,DBGMCU Identity Code Register"
hexmask.long.word 0x00 16.--31. 1. "REV_ID,Revision"
hexmask.long.word 0x00 0.--11. 1. "DEV_ID,Device ID"
group.long 0x04++0x03
line.long 0x00 "CR,DBGMCU Configuration Register"
bitfld.long 0x00 2. "DBG_STANDBY,Allow debug in STANDBY mode" "0,1"
bitfld.long 0x00 1. "DBG_STOP,Allow debug in STOP mode" "0,1"
newline
bitfld.long 0x00 0. "DBG_SLEEP,Allow debug in SLEEP mode" "0,1"
group.long 0x3C++0x03
line.long 0x00 "APB1FZR1,DBGMCU CPU1 APB1 Peripheral Freeze Register 1"
bitfld.long 0x00 31. "DBG_LPTIM1_STOP,LPTIM1 stop in CPU1 debug" "0,1"
bitfld.long 0x00 23. "DBG_I2C3_STOP,I2C3 SMBUS timeout stop in CPU1 debug" "0,1"
newline
bitfld.long 0x00 22. "DBG_I2C2_STOP,I2C2 SMBUS timeout stop in CPU1 debug" "0,1"
bitfld.long 0x00 21. "DBG_I2C1_STOP,I2C1 SMBUS timeout stop in CPU1 debug" "0,1"
newline
bitfld.long 0x00 12. "DBG_IWDG_STOP,IWDG stop in CPU1 debug" "0,1"
bitfld.long 0x00 11. "DBG_WWDG_STOP,WWDG stop in CPU1 debug" "0,1"
newline
bitfld.long 0x00 10. "DBG_RTC_STOP,RTC stop in CPU1 debug" "0,1"
bitfld.long 0x00 0. "DBG_TIM2_STOP,TIM2 stop in CPU1 debug" "0,1"
group.long 0x44++0x03
line.long 0x00 "APB1FZR2,DBGMCU CPU1 APB1 Peripheral Freeze Register 2"
bitfld.long 0x00 6. "DBG_LPTIM3_STOP,DBG_LPTIM3_STOP" "0,1"
bitfld.long 0x00 5. "DBG_LPTIM2_STOP,DBG_LPTIM2_STOP" "0,1"
group.long 0x4C++0x03
line.long 0x00 "APB2FZR,DBGMCU CPU1 APB2 Peripheral Freeze Register"
bitfld.long 0x00 18. "DBG_TIM17_STOP,DBG_TIM17_STOP" "0,1"
bitfld.long 0x00 17. "DBG_TIM16_STOP,DBG_TIM16_STOP" "0,1"
newline
bitfld.long 0x00 11. "DBG_TIM1_STOP,DBG_TIM1_STOP" "0,1"
tree.end
tree "DMA (Direct memory access controller)"
repeat 2. (list 1. 2.) (list ad:0x40020000 ad:0x40020400)
tree "DMA$1"
base $2
rgroup.long 0x00++0x03
line.long 0x00 "ISR,interrupt status register"
bitfld.long 0x00 27. "TEIF7,transfer error (TE) flag for channel 7" "0,1"
bitfld.long 0x00 26. "HTIF7,half transfer (HT) flag for channel 7" "0,1"
newline
bitfld.long 0x00 25. "TCIF7,transfer complete (TC) flag for channel 7" "0,1"
bitfld.long 0x00 24. "GIF7,global interrupt flag for channel 7" "0,1"
newline
bitfld.long 0x00 23. "TEIF6,transfer error (TE) flag for channel 6" "0,1"
bitfld.long 0x00 22. "HTIF6,half transfer (HT) flag for channel 6" "0,1"
newline
bitfld.long 0x00 21. "TCIF6,transfer complete (TC) flag for channel 6" "0,1"
bitfld.long 0x00 20. "GIF6,global interrupt flag for channel 6" "0,1"
newline
bitfld.long 0x00 19. "TEIF5,transfer error (TE) flag for channel 5" "0,1"
bitfld.long 0x00 18. "HTIF5,half transfer (HT) flag for channel 5" "0,1"
newline
bitfld.long 0x00 17. "TCIF5,transfer complete (TC) flag for channel 5" "0,1"
bitfld.long 0x00 16. "GIF5,global interrupt flag for channel 5" "0,1"
newline
bitfld.long 0x00 15. "TEIF4,transfer error (TE) flag for channel 4" "0,1"
bitfld.long 0x00 14. "HTIF4,half transfer (HT) flag for channel 4" "0,1"
newline
bitfld.long 0x00 13. "TCIF4,transfer complete (TC) flag for channel 4" "0,1"
bitfld.long 0x00 12. "GIF4,global interrupt flag for channel 4" "0,1"
newline
bitfld.long 0x00 11. "TEIF3,transfer error (TE) flag for channel 3" "0,1"
bitfld.long 0x00 10. "HTIF3,half transfer (HT) flag for channel 3" "0,1"
newline
bitfld.long 0x00 9. "TCIF3,transfer complete (TC) flag for channel 3" "0,1"
bitfld.long 0x00 8. "GIF3,global interrupt flag for channel 3" "0,1"
newline
bitfld.long 0x00 7. "TEIF2,transfer error (TE) flag for channel 2" "0,1"
bitfld.long 0x00 6. "HTIF2,half transfer (HT) flag for channel 2" "0,1"
newline
bitfld.long 0x00 5. "TCIF2,transfer complete (TC) flag for channel 2" "0,1"
bitfld.long 0x00 4. "GIF2,global interrupt flag for channel 2" "0,1"
newline
bitfld.long 0x00 3. "TEIF1,transfer error (TE) flag for channel 1" "0,1"
bitfld.long 0x00 2. "HTIF1,half transfer (HT) flag for channel 1" "0,1"
newline
bitfld.long 0x00 1. "TCIF1,transfer complete (TC) flag for channel 1" "0,1"
bitfld.long 0x00 0. "GIF1,global interrupt flag for channel 1" "0,1"
wgroup.long 0x04++0x03
line.long 0x00 "IFCR,interrupt flag clear register"
bitfld.long 0x00 27. "TEIF7,transfer error flag clear for channel 7" "0,1"
bitfld.long 0x00 26. "HTIF7,half transfer flag clear for channel 7" "0,1"
newline
bitfld.long 0x00 25. "TCIF7,transfer complete flag clear for channel 7" "0,1"
bitfld.long 0x00 24. "GIF7,global interrupt flag clear for channel 7" "0,1"
newline
bitfld.long 0x00 23. "TEIF6,transfer error flag clear for channel 6" "0,1"
bitfld.long 0x00 22. "HTIF6,half transfer flag clear for channel 6" "0,1"
newline
bitfld.long 0x00 21. "TCIF6,transfer complete flag clear for channel 6" "0,1"
bitfld.long 0x00 20. "GIF6,global interrupt flag clear for channel 6" "0,1"
newline
bitfld.long 0x00 19. "TEIF5,transfer error flag clear for channel 5" "0,1"
bitfld.long 0x00 18. "HTIF5,half transfer flag clear for channel 5" "0,1"
newline
bitfld.long 0x00 17. "TCIF5,transfer complete flag clear for channel 5" "0,1"
bitfld.long 0x00 16. "GIF5,global interrupt flag clear for channel 5" "0,1"
newline
bitfld.long 0x00 15. "TEIF4,transfer error flag clear for channel 4" "0,1"
bitfld.long 0x00 14. "HTIF4,half transfer flag clear for channel 4" "0,1"
newline
bitfld.long 0x00 13. "TCIF4,transfer complete flag clear for channel 4" "0,1"
bitfld.long 0x00 12. "GIF4,global interrupt flag clear for channel 4" "0,1"
newline
bitfld.long 0x00 11. "TEIF3,transfer error flag clear for channel 3" "0,1"
bitfld.long 0x00 10. "HTIF3,half transfer flag clear for channel 3" "0,1"
newline
bitfld.long 0x00 9. "TCIF3,transfer complete flag clear for channel 3" "0,1"
bitfld.long 0x00 8. "GIF3,global interrupt flag clear for channel 3" "0,1"
newline
bitfld.long 0x00 7. "TEIF2,transfer error flag clear for channel 2" "0,1"
bitfld.long 0x00 6. "HTIF2,half transfer flag clear for channel 2" "0,1"
newline
bitfld.long 0x00 5. "TCIF2,transfer complete flag clear for channel 2" "0,1"
bitfld.long 0x00 4. "GIF2,global interrupt flag clear for channel 2" "0,1"
newline
bitfld.long 0x00 3. "TEIF1,transfer error flag clear for channel 1" "0,1"
bitfld.long 0x00 2. "HTIF1,half transfer flag clear for channel 1" "0,1"
newline
bitfld.long 0x00 1. "TCIF1,transfer complete flag clear for channel 1" "0,1"
bitfld.long 0x00 0. "GIF1,global interrupt flag clear for channel 1" "0,1"
group.long 0x08++0x03
line.long 0x00 "CCR1,channel x configuration register"
bitfld.long 0x00 20. "PRIV,rivileged mode" "0,1"
bitfld.long 0x00 19. "DSEC,ecurity of the DMA transfer to the destination" "0,1"
newline
bitfld.long 0x00 18. "SSEC,ecurity of the DMA transfer from the source" "0,1"
bitfld.long 0x00 17. "SECM,ecure mode" "0,1"
newline
bitfld.long 0x00 14. "MEM2MEM,memory-to-memory mode" "0,1"
bitfld.long 0x00 12.--13. "PL,priority level" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MSIZE,memory size" "0,1,2,3"
bitfld.long 0x00 8.--9. "PSIZE,peripheral size" "0,1,2,3"
newline
bitfld.long 0x00 7. "MINC,memory increment mode" "0,1"
bitfld.long 0x00 6. "PINC,peripheral increment mode" "0,1"
newline
bitfld.long 0x00 5. "CIRC,circular mode" "0,1"
bitfld.long 0x00 4. "DIR,data transfer direction" "0,1"
newline
bitfld.long 0x00 3. "TEIE,transfer error interrupt enable" "0,1"
bitfld.long 0x00 2. "HTIE,half transfer interrupt enable" "0,1"
newline
bitfld.long 0x00 1. "TCIE,transfer complete interrupt enable" "0,1"
bitfld.long 0x00 0. "EN,channel enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CNDTR1,channel x number of data to transfer register"
hexmask.long.tbyte 0x00 0.--17. 1. "NDT,number of data to transfer (0 to 218 - 1)"
group.long 0x10++0x03
line.long 0x00 "CPAR1,channel x peripheral address register"
hexmask.long 0x00 0.--31. 1. "PA,peripheral address"
group.long 0x14++0x03
line.long 0x00 "CMAR1,channel x memory address register"
hexmask.long 0x00 0.--31. 1. "MA,peripheral address"
group.long 0x1C++0x03
line.long 0x00 "CCR2,channel x configuration register"
bitfld.long 0x00 20. "PRIV,rivileged mode" "0,1"
bitfld.long 0x00 19. "DSEC,ecurity of the DMA transfer to the destination" "0,1"
newline
bitfld.long 0x00 18. "SSEC,ecurity of the DMA transfer from the source" "0,1"
bitfld.long 0x00 17. "SECM,ecure mode" "0,1"
newline
bitfld.long 0x00 14. "MEM2MEM,memory-to-memory mode" "0,1"
bitfld.long 0x00 12.--13. "PL,priority level" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MSIZE,memory size" "0,1,2,3"
bitfld.long 0x00 8.--9. "PSIZE,peripheral size" "0,1,2,3"
newline
bitfld.long 0x00 7. "MINC,memory increment mode" "0,1"
bitfld.long 0x00 6. "PINC,peripheral increment mode" "0,1"
newline
bitfld.long 0x00 5. "CIRC,circular mode" "0,1"
bitfld.long 0x00 4. "DIR,data transfer direction" "0,1"
newline
bitfld.long 0x00 3. "TEIE,transfer error interrupt enable" "0,1"
bitfld.long 0x00 2. "HTIE,half transfer interrupt enable" "0,1"
newline
bitfld.long 0x00 1. "TCIE,transfer complete interrupt enable" "0,1"
bitfld.long 0x00 0. "EN,channel enable" "0,1"
group.long 0x20++0x03
line.long 0x00 "CNDTR2,channel x number of data to transfer register"
hexmask.long.tbyte 0x00 0.--17. 1. "NDT,number of data to transfer (0 to 218 - 1)"
group.long 0x24++0x03
line.long 0x00 "CPAR2,channel x peripheral address register"
hexmask.long 0x00 0.--31. 1. "PA,peripheral address"
group.long 0x28++0x03
line.long 0x00 "CMAR2,channel x memory address register"
hexmask.long 0x00 0.--31. 1. "MA,peripheral address"
group.long 0x30++0x03
line.long 0x00 "CCR3,channel x configuration register"
bitfld.long 0x00 20. "PRIV,rivileged mode" "0,1"
bitfld.long 0x00 19. "DSEC,ecurity of the DMA transfer to the destination" "0,1"
newline
bitfld.long 0x00 18. "SSEC,ecurity of the DMA transfer from the source" "0,1"
bitfld.long 0x00 17. "SECM,ecure mode" "0,1"
newline
bitfld.long 0x00 14. "MEM2MEM,memory-to-memory mode" "0,1"
bitfld.long 0x00 12.--13. "PL,priority level" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MSIZE,memory size" "0,1,2,3"
bitfld.long 0x00 8.--9. "PSIZE,peripheral size" "0,1,2,3"
newline
bitfld.long 0x00 7. "MINC,memory increment mode" "0,1"
bitfld.long 0x00 6. "PINC,peripheral increment mode" "0,1"
newline
bitfld.long 0x00 5. "CIRC,circular mode" "0,1"
bitfld.long 0x00 4. "DIR,data transfer direction" "0,1"
newline
bitfld.long 0x00 3. "TEIE,transfer error interrupt enable" "0,1"
bitfld.long 0x00 2. "HTIE,half transfer interrupt enable" "0,1"
newline
bitfld.long 0x00 1. "TCIE,transfer complete interrupt enable" "0,1"
bitfld.long 0x00 0. "EN,channel enable" "0,1"
group.long 0x34++0x03
line.long 0x00 "CNDTR3,channel x number of data to transfer register"
hexmask.long.tbyte 0x00 0.--17. 1. "NDT,number of data to transfer (0 to 218 - 1)"
group.long 0x38++0x03
line.long 0x00 "CPAR3,channel x peripheral address register"
hexmask.long 0x00 0.--31. 1. "PA,peripheral address"
group.long 0x3C++0x03
line.long 0x00 "CMAR3,channel x memory address register"
hexmask.long 0x00 0.--31. 1. "MA,peripheral address"
group.long 0x44++0x03
line.long 0x00 "CCR4,channel x configuration register"
bitfld.long 0x00 20. "PRIV,rivileged mode" "0,1"
bitfld.long 0x00 19. "DSEC,ecurity of the DMA transfer to the destination" "0,1"
newline
bitfld.long 0x00 18. "SSEC,ecurity of the DMA transfer from the source" "0,1"
bitfld.long 0x00 17. "SECM,ecure mode" "0,1"
newline
bitfld.long 0x00 14. "MEM2MEM,memory-to-memory mode" "0,1"
bitfld.long 0x00 12.--13. "PL,priority level" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MSIZE,memory size" "0,1,2,3"
bitfld.long 0x00 8.--9. "PSIZE,peripheral size" "0,1,2,3"
newline
bitfld.long 0x00 7. "MINC,memory increment mode" "0,1"
bitfld.long 0x00 6. "PINC,peripheral increment mode" "0,1"
newline
bitfld.long 0x00 5. "CIRC,circular mode" "0,1"
bitfld.long 0x00 4. "DIR,data transfer direction" "0,1"
newline
bitfld.long 0x00 3. "TEIE,transfer error interrupt enable" "0,1"
bitfld.long 0x00 2. "HTIE,half transfer interrupt enable" "0,1"
newline
bitfld.long 0x00 1. "TCIE,transfer complete interrupt enable" "0,1"
bitfld.long 0x00 0. "EN,channel enable" "0,1"
group.long 0x48++0x03
line.long 0x00 "CNDTR4,channel x number of data to transfer register"
hexmask.long.tbyte 0x00 0.--17. 1. "NDT,number of data to transfer (0 to 218 - 1)"
group.long 0x4C++0x03
line.long 0x00 "CPAR4,channel x peripheral address register"
hexmask.long 0x00 0.--31. 1. "PA,peripheral address"
group.long 0x50++0x03
line.long 0x00 "CMAR4,channel x memory address register"
hexmask.long 0x00 0.--31. 1. "MA,peripheral address"
group.long 0x58++0x03
line.long 0x00 "CCR5,channel x configuration register"
bitfld.long 0x00 20. "PRIV,rivileged mode" "0,1"
bitfld.long 0x00 19. "DSEC,ecurity of the DMA transfer to the destination" "0,1"
newline
bitfld.long 0x00 18. "SSEC,ecurity of the DMA transfer from the source" "0,1"
bitfld.long 0x00 17. "SECM,ecure mode" "0,1"
newline
bitfld.long 0x00 14. "MEM2MEM,memory-to-memory mode" "0,1"
bitfld.long 0x00 12.--13. "PL,priority level" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MSIZE,memory size" "0,1,2,3"
bitfld.long 0x00 8.--9. "PSIZE,peripheral size" "0,1,2,3"
newline
bitfld.long 0x00 7. "MINC,memory increment mode" "0,1"
bitfld.long 0x00 6. "PINC,peripheral increment mode" "0,1"
newline
bitfld.long 0x00 5. "CIRC,circular mode" "0,1"
bitfld.long 0x00 4. "DIR,data transfer direction" "0,1"
newline
bitfld.long 0x00 3. "TEIE,transfer error interrupt enable" "0,1"
bitfld.long 0x00 2. "HTIE,half transfer interrupt enable" "0,1"
newline
bitfld.long 0x00 1. "TCIE,transfer complete interrupt enable" "0,1"
bitfld.long 0x00 0. "EN,channel enable" "0,1"
group.long 0x5C++0x03
line.long 0x00 "CNDTR5,channel x number of data to transfer register"
hexmask.long.tbyte 0x00 0.--17. 1. "NDT,number of data to transfer (0 to 218 - 1)"
group.long 0x60++0x03
line.long 0x00 "CPAR5,channel x peripheral address register"
hexmask.long 0x00 0.--31. 1. "PA,peripheral address"
group.long 0x64++0x03
line.long 0x00 "CMAR5,channel x memory address register"
hexmask.long 0x00 0.--31. 1. "MA,peripheral address"
group.long 0x6C++0x03
line.long 0x00 "CCR6,channel x configuration register"
bitfld.long 0x00 20. "PRIV,rivileged mode" "0,1"
bitfld.long 0x00 19. "DSEC,ecurity of the DMA transfer to the destination" "0,1"
newline
bitfld.long 0x00 18. "SSEC,ecurity of the DMA transfer from the source" "0,1"
bitfld.long 0x00 17. "SECM,ecure mode" "0,1"
newline
bitfld.long 0x00 14. "MEM2MEM,memory-to-memory mode" "0,1"
bitfld.long 0x00 12.--13. "PL,priority level" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MSIZE,memory size" "0,1,2,3"
bitfld.long 0x00 8.--9. "PSIZE,peripheral size" "0,1,2,3"
newline
bitfld.long 0x00 7. "MINC,memory increment mode" "0,1"
bitfld.long 0x00 6. "PINC,peripheral increment mode" "0,1"
newline
bitfld.long 0x00 5. "CIRC,circular mode" "0,1"
bitfld.long 0x00 4. "DIR,data transfer direction" "0,1"
newline
bitfld.long 0x00 3. "TEIE,transfer error interrupt enable" "0,1"
bitfld.long 0x00 2. "HTIE,half transfer interrupt enable" "0,1"
newline
bitfld.long 0x00 1. "TCIE,transfer complete interrupt enable" "0,1"
bitfld.long 0x00 0. "EN,channel enable" "0,1"
group.long 0x70++0x03
line.long 0x00 "CNDTR6,channel x number of data to transfer register"
hexmask.long.tbyte 0x00 0.--17. 1. "NDT,number of data to transfer (0 to 218 - 1)"
group.long 0x74++0x03
line.long 0x00 "CPAR6,channel x peripheral address register"
hexmask.long 0x00 0.--31. 1. "PA,peripheral address"
group.long 0x78++0x03
line.long 0x00 "CMAR6,channel x memory address register"
hexmask.long 0x00 0.--31. 1. "MA,peripheral address"
group.long 0x80++0x03
line.long 0x00 "CCR7,channel x configuration register"
bitfld.long 0x00 20. "PRIV,rivileged mode" "0,1"
bitfld.long 0x00 19. "DSEC,ecurity of the DMA transfer to the destination" "0,1"
newline
bitfld.long 0x00 18. "SSEC,ecurity of the DMA transfer from the source" "0,1"
bitfld.long 0x00 17. "SECM,ecure mode" "0,1"
newline
bitfld.long 0x00 14. "MEM2MEM,memory-to-memory mode" "0,1"
bitfld.long 0x00 12.--13. "PL,priority level" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MSIZE,memory size" "0,1,2,3"
bitfld.long 0x00 8.--9. "PSIZE,peripheral size" "0,1,2,3"
newline
bitfld.long 0x00 7. "MINC,memory increment mode" "0,1"
bitfld.long 0x00 6. "PINC,peripheral increment mode" "0,1"
newline
bitfld.long 0x00 5. "CIRC,circular mode" "0,1"
bitfld.long 0x00 4. "DIR,data transfer direction" "0,1"
newline
bitfld.long 0x00 3. "TEIE,transfer error interrupt enable" "0,1"
bitfld.long 0x00 2. "HTIE,half transfer interrupt enable" "0,1"
newline
bitfld.long 0x00 1. "TCIE,transfer complete interrupt enable" "0,1"
bitfld.long 0x00 0. "EN,channel enable" "0,1"
group.long 0x84++0x03
line.long 0x00 "CNDTR7,channel x number of data to transfer register"
hexmask.long.tbyte 0x00 0.--17. 1. "NDT,number of data to transfer (0 to 218 - 1)"
group.long 0x88++0x03
line.long 0x00 "CPAR7,channel x peripheral address register"
hexmask.long 0x00 0.--31. 1. "PA,peripheral address"
group.long 0x8C++0x03
line.long 0x00 "CMAR7,channel x memory address register"
hexmask.long 0x00 0.--31. 1. "MA,peripheral address"
tree.end
repeat.end
tree.end
tree "DMAMUX (DMA request multiplexer)"
base ad:0x40020800
group.long 0x00++0x03
line.long 0x00 "C0CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x04++0x03
line.long 0x00 "C1CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x08++0x03
line.long 0x00 "C2CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x0C++0x03
line.long 0x00 "C3CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x10++0x03
line.long 0x00 "C4CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x14++0x03
line.long 0x00 "C5CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x18++0x03
line.long 0x00 "C6CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x1C++0x03
line.long 0x00 "C7CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x20++0x03
line.long 0x00 "C8CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x24++0x03
line.long 0x00 "C9CR,request line multiplexer channel x configuration register"
bitfld.long 0x00 24.--28. "SYNC_ID,Synchronization identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,Number of DMA requests minus 1 to forward" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,Synchronization polarity" "0,1,2,3"
bitfld.long 0x00 16. "SE,Synchronization enable" "0,1"
newline
bitfld.long 0x00 9. "EGE,Event generation enable" "0,1"
bitfld.long 0x00 8. "SOIE,Synchronization overrun interrupt enable" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMA request identification"
group.long 0x28++0x03
line.long 0x00 "C10CR,C10CR"
bitfld.long 0x00 24.--28. "SYNC_ID,SYNC_ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,NBREQ" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,SPOL" "0,1,2,3"
bitfld.long 0x00 16. "SE,SE" "0,1"
newline
bitfld.long 0x00 9. "EGE,EGE" "0,1"
bitfld.long 0x00 8. "SOIE,SOIE" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMAREQ_ID"
group.long 0x2C++0x03
line.long 0x00 "C11CR,C11CR"
bitfld.long 0x00 24.--28. "SYNC_ID,SYNC_ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,NBREQ" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,SPOL" "0,1,2,3"
bitfld.long 0x00 16. "SE,SE" "0,1"
newline
bitfld.long 0x00 9. "EGE,EGE" "0,1"
bitfld.long 0x00 8. "SOIE,SOIE" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMAREQ_ID"
group.long 0x30++0x03
line.long 0x00 "C12CR,C12CR"
bitfld.long 0x00 24.--28. "SYNC_ID,SYNC_ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,NBREQ" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,SPOL" "0,1,2,3"
bitfld.long 0x00 16. "SE,SE" "0,1"
newline
bitfld.long 0x00 9. "EGE,EGE" "0,1"
bitfld.long 0x00 8. "SOIE,SOIE" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMAREQ_ID"
group.long 0x34++0x03
line.long 0x00 "C13CR,C13CR"
bitfld.long 0x00 24.--28. "SYNC_ID,SYNC_ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19.--23. "NBREQ,NBREQ" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 17.--18. "SPOL,SPOL" "0,1,2,3"
bitfld.long 0x00 16. "SE,SE" "0,1"
newline
bitfld.long 0x00 9. "EGE,EGE" "0,1"
bitfld.long 0x00 8. "SOIE,SOIE" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DMAREQ_ID,DMAREQ_ID"
rgroup.long 0x80++0x03
line.long 0x00 "CSR,request line multiplexer interrupt channel status register"
bitfld.long 0x00 13. "SOF13,Synchronization overrun event flag" "0,1"
bitfld.long 0x00 12. "SOF12,SOF12" "0,1"
newline
bitfld.long 0x00 11. "SOF11,SOF11" "0,1"
bitfld.long 0x00 10. "SOF10,SOF10" "0,1"
newline
bitfld.long 0x00 9. "SOF9,SOF9" "0,1"
bitfld.long 0x00 8. "SOF8,SOF8" "0,1"
newline
bitfld.long 0x00 7. "SOF7,SOF7" "0,1"
bitfld.long 0x00 6. "SOF6,SOF6" "0,1"
newline
bitfld.long 0x00 5. "SOF5,SOF5" "0,1"
bitfld.long 0x00 4. "SOF4,SOF4" "0,1"
newline
bitfld.long 0x00 3. "SOF3,SOF3" "0,1"
bitfld.long 0x00 2. "SOF2,SOF2" "0,1"
newline
bitfld.long 0x00 1. "SOF1,SOF1" "0,1"
bitfld.long 0x00 0. "SOF0,SOF0" "0,1"
wgroup.long 0x84++0x03
line.long 0x00 "CCFR,request line multiplexer interrupt channel clear flag register"
bitfld.long 0x00 13. "CSOF13,CSOF13" "0,1"
bitfld.long 0x00 12. "CSOF12,CSOF12" "0,1"
newline
bitfld.long 0x00 11. "CSOF11,CSOF11" "0,1"
bitfld.long 0x00 10. "CSOF10,CSOF10" "0,1"
newline
bitfld.long 0x00 9. "CSOF9,CSOF9" "0,1"
bitfld.long 0x00 8. "CSOF8,CSOF8" "0,1"
newline
bitfld.long 0x00 7. "CSOF7,CSOF7" "0,1"
bitfld.long 0x00 6. "CSOF6,CSOF6" "0,1"
newline
bitfld.long 0x00 5. "CSOF5,CSOF5" "0,1"
bitfld.long 0x00 4. "CSOF4,CSOF4" "0,1"
newline
bitfld.long 0x00 3. "CSOF3,CSOF3" "0,1"
bitfld.long 0x00 2. "CSOF2,CSOF2" "0,1"
newline
bitfld.long 0x00 1. "CSOF1,CSOF1" "0,1"
bitfld.long 0x00 0. "CSOF0,CSOF0" "0,1"
group.long 0x100++0x03
line.long 0x00 "RG0CR,request generator channel x configuration register"
bitfld.long 0x00 19.--23. "GNBREQ,Number of DMA requests to be generated (minus 1)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 17.--18. "GPOL,DMA request generator trigger polarity" "0,1,2,3"
newline
bitfld.long 0x00 16. "GE,DMA request generator channel x enable" "0,1"
bitfld.long 0x00 8. "OIE,Trigger overrun interrupt enable" "0,1"
newline
bitfld.long 0x00 0.--4. "SIG_ID,Signal identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x104++0x03
line.long 0x00 "RG1CR,request generator channel x configuration register"
bitfld.long 0x00 19.--23. "GNBREQ,Number of DMA requests to be generated (minus 1)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 17.--18. "GPOL,DMA request generator trigger polarity" "0,1,2,3"
newline
bitfld.long 0x00 16. "GE,DMA request generator channel x enable" "0,1"
bitfld.long 0x00 8. "OIE,Trigger overrun interrupt enable" "0,1"
newline
bitfld.long 0x00 0.--4. "SIG_ID,Signal identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x108++0x03
line.long 0x00 "RG2CR,request generator channel x configuration register"
bitfld.long 0x00 19.--23. "GNBREQ,Number of DMA requests to be generated (minus 1)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 17.--18. "GPOL,DMA request generator trigger polarity" "0,1,2,3"
newline
bitfld.long 0x00 16. "GE,DMA request generator channel x enable" "0,1"
bitfld.long 0x00 8. "OIE,Trigger overrun interrupt enable" "0,1"
newline
bitfld.long 0x00 0.--4. "SIG_ID,Signal identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x10C++0x03
line.long 0x00 "RG3CR,request generator channel x configuration register"
bitfld.long 0x00 19.--23. "GNBREQ,Number of DMA requests to be generated (minus 1)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 17.--18. "GPOL,DMA request generator trigger polarity" "0,1,2,3"
newline
bitfld.long 0x00 16. "GE,DMA request generator channel x enable" "0,1"
bitfld.long 0x00 8. "OIE,Trigger overrun interrupt enable" "0,1"
newline
bitfld.long 0x00 0.--4. "SIG_ID,Signal identification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x140++0x03
line.long 0x00 "RGSR,request generator interrupt status register"
bitfld.long 0x00 3. "OF3,Trigger overrun event flag" "0,1"
bitfld.long 0x00 2. "OF2,OF2" "0,1"
newline
bitfld.long 0x00 1. "OF1,OF1" "0,1"
bitfld.long 0x00 0. "OF0,OF0" "0,1"
wgroup.long 0x144++0x03
line.long 0x00 "RGCFR,request generator interrupt clear flag register"
bitfld.long 0x00 3. "COF3,Clear trigger overrun event flag" "0,1"
bitfld.long 0x00 2. "COF2,COF2" "0,1"
newline
bitfld.long 0x00 1. "COF1,COF1" "0,1"
bitfld.long 0x00 0. "COF0,COF0" "0,1"
tree.end
tree "EXTI (External interrupt/event controller)"
base ad:0x58000800
group.long 0x00++0x03
line.long 0x00 "RTSR1,rising trigger selection register"
bitfld.long 0x00 21.--22. "RT21,Rising trigger event configuration bit of Configurable Event input" "0,1,2,3"
hexmask.long.tbyte 0x00 0.--16. 1. "RT,Rising trigger event configuration bit of Configurable Event input"
group.long 0x04++0x03
line.long 0x00 "FTSR1,falling trigger selection register"
bitfld.long 0x00 21.--22. "FT21,Falling trigger event configuration bit of Configurable Event input" "0,1,2,3"
hexmask.long.tbyte 0x00 0.--16. 1. "FT,Falling trigger event configuration bit of Configurable Event input"
group.long 0x08++0x03
line.long 0x00 "SWIER1,software interrupt event register"
bitfld.long 0x00 21.--22. "SWI21,Software interrupt on event" "0,1,2,3"
hexmask.long.tbyte 0x00 0.--16. 1. "SWI,Software interrupt on event"
group.long 0x0C++0x03
line.long 0x00 "PR1,EXTI pending register"
bitfld.long 0x00 21.--22. "PIF21,Configurable event inputs Pending bit" "0,1,2,3"
hexmask.long.tbyte 0x00 0.--16. 1. "PIF,Configurable event inputs Pending bit"
group.long 0x20++0x03
line.long 0x00 "RTSR2,rising trigger selection register"
bitfld.long 0x00 13. "RT45,Rising trigger event configuration bit of Configurable Event input" "0,1"
bitfld.long 0x00 2. "RT34,Rising trigger event configuration bit of Configurable Event input" "0,1"
group.long 0x24++0x03
line.long 0x00 "FTSR2,falling trigger selection register"
bitfld.long 0x00 13. "FT45,Falling trigger event configuration bit of Configurable Event input" "0,1"
bitfld.long 0x00 2. "FT34,Falling trigger event configuration bit of Configurable Event input" "0,1"
group.long 0x28++0x03
line.long 0x00 "SWIER2,software interrupt event register"
bitfld.long 0x00 13. "SWI45,Software interrupt on event 45" "0,1"
bitfld.long 0x00 2. "SWI34,Software interrupt on event" "0,1"
group.long 0x2C++0x03
line.long 0x00 "PR2,pending register"
bitfld.long 0x00 13. "PIF45,Configurable event inputs 45 Pending bit" "0,1"
bitfld.long 0x00 2. "PIF34,Configurable event inputs 33 Pending bit" "0,1"
group.long 0x80++0x03
line.long 0x00 "IMR1,interrupt mask register"
hexmask.long 0x00 0.--31. 1. "IM,wakeup with interrupt Mask on event input"
group.long 0x84++0x03
line.long 0x00 "EMR1,event mask register"
bitfld.long 0x00 22. "EM22,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 21. "EM21,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 20. "EM20,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 19. "EM19,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 18. "EM18,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 17. "EM17,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 15. "EM15,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 14. "EM14,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 13. "EM13,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 12. "EM12,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 11. "EM11,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 10. "EM10,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 9. "EM9,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 8. "EM8,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 7. "EM7,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 6. "EM6,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 5. "EM5,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 4. "EM4,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 3. "EM3,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 2. "EM2,Wakeup with event generation Mask on Event input" "0,1"
newline
bitfld.long 0x00 1. "EM1,Wakeup with event generation Mask on Event input" "0,1"
bitfld.long 0x00 0. "EM0,Wakeup with event generation Mask on Event input" "0,1"
group.long 0x90++0x03
line.long 0x00 "IMR2,interrupt mask register"
bitfld.long 0x00 10.--14. "IM42,CPUm Wakeup with interrupt Mask on Event input" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 6. "IM38,CPUm Wakeup with interrupt Mask on Event input" "0,1"
newline
bitfld.long 0x00 2. "IM34,CPUm Wakeup with interrupt Mask on Event input" "0,1"
tree.end
tree "FLASH (Flash)"
base ad:0x58004000
group.long 0x00++0x03
line.long 0x00 "ACR,Access control register"
bitfld.long 0x00 16. "EMPTY,Flash User area empty" "0,1"
bitfld.long 0x00 15. "PES,CPU1 programm erase suspend request" "0,1"
newline
bitfld.long 0x00 12. "DCRST,Data cache reset" "0,1"
bitfld.long 0x00 11. "ICRST,Instruction cache reset" "0,1"
newline
bitfld.long 0x00 10. "DCEN,Data cache enable" "0,1"
bitfld.long 0x00 9. "ICEN,Instruction cache enable" "0,1"
newline
bitfld.long 0x00 8. "PRFTEN,Prefetch enable" "0,1"
bitfld.long 0x00 0.--2. "LATENCY,Latency" "0,1,2,3,4,5,6,7"
wgroup.long 0x08++0x03
line.long 0x00 "KEYR,Flash key register"
hexmask.long 0x00 0.--31. 1. "KEY,KEY"
wgroup.long 0x0C++0x03
line.long 0x00 "OPTKEYR,Option byte key register"
hexmask.long 0x00 0.--31. 1. "OPTKEY,Option byte key"
group.long 0x10++0x03
line.long 0x00 "SR,Status register"
rbitfld.long 0x00 19. "PESD,Programming / erase operation suspended" "0,1"
rbitfld.long 0x00 18. "CFGBSY,Programming or erase configuration busy" "0,1"
newline
rbitfld.long 0x00 16. "BSY,Busy" "0,1"
bitfld.long 0x00 15. "OPTVERR,Option validity error" "0,1"
newline
bitfld.long 0x00 14. "RDERR,PCROP read error" "0,1"
rbitfld.long 0x00 13. "OPTVN,User Option OPTIVAL indication" "0,1"
newline
bitfld.long 0x00 9. "FASTERR,Fast programming error" "0,1"
bitfld.long 0x00 8. "MISERR,Fast programming data miss error" "0,1"
newline
bitfld.long 0x00 7. "PGSERR,Programming sequence error" "0,1"
bitfld.long 0x00 6. "SIZERR,Size error" "0,1"
newline
bitfld.long 0x00 5. "PGAERR,Programming alignment error" "0,1"
bitfld.long 0x00 4. "WRPERR,Write protected error" "0,1"
newline
bitfld.long 0x00 3. "PROGERR,Programming error" "0,1"
bitfld.long 0x00 1. "OPERR,Operation error" "0,1"
newline
bitfld.long 0x00 0. "EOP,End of operation" "0,1"
group.long 0x14++0x03
line.long 0x00 "CR,Flash control register"
bitfld.long 0x00 31. "LOCK,FLASH_CR Lock" "0,1"
bitfld.long 0x00 30. "OPTLOCK,Options Lock" "0,1"
newline
bitfld.long 0x00 27. "OBL_LAUNCH,Force the option byte loading" "0,1"
bitfld.long 0x00 26. "RDERRIE,PCROP read error interrupt enable" "0,1"
newline
bitfld.long 0x00 25. "ERRIE,Error interrupt enable" "0,1"
bitfld.long 0x00 24. "EOPIE,End of operation interrupt enable" "0,1"
newline
bitfld.long 0x00 18. "FSTPG,Fast programming" "0,1"
bitfld.long 0x00 17. "OPTSTRT,Options modification start" "0,1"
newline
bitfld.long 0x00 16. "STRT,Start" "0,1"
hexmask.long.byte 0x00 3.--9. 1. "PNB,Page number"
newline
bitfld.long 0x00 2. "MER,Mass erase" "0,1"
bitfld.long 0x00 1. "PER,Page erase" "0,1"
newline
bitfld.long 0x00 0. "PG,Programming" "0,1"
group.long 0x18++0x03
line.long 0x00 "ECCR,Flash ECC register"
bitfld.long 0x00 31. "ECCD,ECC detection" "0,1"
bitfld.long 0x00 30. "ECCC,ECC correction" "0,1"
newline
bitfld.long 0x00 24. "ECCCIE,ECC correction interrupt enable" "0,1"
rbitfld.long 0x00 20. "SYSF_ECC,System Flash ECC fail" "0,1"
newline
hexmask.long.tbyte 0x00 0.--16. 1. "ADDR_ECC,ECC fail address"
group.long 0x20++0x03
line.long 0x00 "OPTR,Flash option register"
bitfld.long 0x00 30. "BOOT_LOCK,CPU1 CM4 Unique Boot entry enable option bit" "0,1"
bitfld.long 0x00 27. "nBOOT0,nBOOT0 option bit" "0,1"
newline
bitfld.long 0x00 26. "nSWBOOT0,Software BOOT0 selection" "0,1"
bitfld.long 0x00 25. "SRAM2_RST,SRAM2 Erase when system reset" "0,1"
newline
bitfld.long 0x00 24. "SRAM2_PE,SRAM2 parity check enable" "0,1"
bitfld.long 0x00 23. "nBOOT1,Boot configuration" "0,1"
newline
bitfld.long 0x00 19. "WWDG_SW,Window watchdog selection" "0,1"
bitfld.long 0x00 18. "IWDG_STDBY,Independent watchdog counter freeze in Standby mode" "0,1"
newline
bitfld.long 0x00 17. "IWDG_STOP,Independent watchdog counter freeze in Stop mode" "0,1"
bitfld.long 0x00 16. "IWDG_SW,Independent watchdog selection" "0,1"
newline
bitfld.long 0x00 14. "nRST_SHDW,nRSTSHDW" "0,1"
bitfld.long 0x00 13. "nRST_STDBY,nRST_STDBY" "0,1"
newline
bitfld.long 0x00 12. "nRST_STOP,nRST_STOP" "0,1"
bitfld.long 0x00 9.--11. "BOR_LEV,BOR reset Level" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8. "ESE,System security enabled flag" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "RDP,Read protection level"
group.long 0x24++0x03
line.long 0x00 "PCROP1ASR,Flash PCROP zone A Start address register"
hexmask.long.byte 0x00 0.--7. 1. "PCROP1A_STRT,PCROP1A area start offset"
group.long 0x28++0x03
line.long 0x00 "PCROP1AER,Flash PCROP zone A End address register"
bitfld.long 0x00 31. "PCROP_RDP,PCROP area preserved when RDP level decreased" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "PCROP1A_END,PCROP area end offset"
group.long 0x2C++0x03
line.long 0x00 "WRP1AR,Flash WRP area A address register"
hexmask.long.byte 0x00 16.--22. 1. "WRP1A_END,Bank 1 WRP first area A end offset"
hexmask.long.byte 0x00 0.--6. 1. "WRP1A_STRT,Bank 1 WRP first area start offset"
group.long 0x30++0x03
line.long 0x00 "WRP1BR,Flash WRP area B address register"
hexmask.long.byte 0x00 16.--22. 1. "WRP1B_END,Bank 1 WRP second area B start offset"
hexmask.long.byte 0x00 0.--6. 1. "WRP1B_STRT,Bank 1 WRP second area B end offset"
group.long 0x34++0x03
line.long 0x00 "PCROP1BSR,Flash PCROP zone B Start address register"
hexmask.long.byte 0x00 0.--7. 1. "PCROP1B_STRT,Bank 1 WRP second area B end offset"
group.long 0x38++0x03
line.long 0x00 "PCROP1BER,Flash PCROP zone B End address register"
hexmask.long.byte 0x00 0.--7. 1. "PCROP1B_END,PCROP1B area end offset"
tree.end
tree "GPIO (General Purpose I/O Ports And Peripheral I/O Lines)"
tree "GPIOA"
base ad:0x48000000
group.long 0x00++0x03
line.long 0x00 "MODER,GPIO port mode register"
bitfld.long 0x00 30.--31. "MODER15,MODER15" "0,1,2,3"
bitfld.long 0x00 28.--29. "MODER14,MODER14" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "MODER13,MODER13" "0,1,2,3"
bitfld.long 0x00 24.--25. "MODER12,MODER12" "0,1,2,3"
newline
bitfld.long 0x00 22.--23. "MODER11,MODER11" "0,1,2,3"
bitfld.long 0x00 20.--21. "MODER10,MODER10" "0,1,2,3"
newline
bitfld.long 0x00 18.--19. "MODER9,MODER9" "0,1,2,3"
bitfld.long 0x00 16.--17. "MODER8,MODER8" "0,1,2,3"
newline
bitfld.long 0x00 14.--15. "MODER7,MODER7" "0,1,2,3"
bitfld.long 0x00 12.--13. "MODER6,MODER6" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MODER5,MODER5" "0,1,2,3"
bitfld.long 0x00 8.--9. "MODER4,MODER4" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "MODER3,MODER3" "0,1,2,3"
bitfld.long 0x00 4.--5. "MODER2,MODER2" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "MODER1,MODER1" "0,1,2,3"
bitfld.long 0x00 0.--1. "MODER0,MODER0" "0,1,2,3"
group.long 0x04++0x03
line.long 0x00 "OTYPER,GPIO port output type register"
bitfld.long 0x00 15. "OT15,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 14. "OT14,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "OT13,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 12. "OT12,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 11. "OT11,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 10. "OT10,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 9. "OT9,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 8. "OT8,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 7. "OT7,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 6. "OT6,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "OT5,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 4. "OT4,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "OT3,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 2. "OT2,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "OT1,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 0. "OT0,Port x configuration bits (y = 0..15)" "0,1"
group.long 0x08++0x03
line.long 0x00 "OSPEEDR,GPIO port output speed register"
bitfld.long 0x00 30.--31. "OSPEEDR15,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 28.--29. "OSPEEDR14,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "OSPEEDR13,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 24.--25. "OSPEEDR12,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 22.--23. "OSPEEDR11,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 20.--21. "OSPEEDR10,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 18.--19. "OSPEEDR9,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 16.--17. "OSPEEDR8,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 14.--15. "OSPEEDR7,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 12.--13. "OSPEEDR6,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "OSPEEDR5,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 8.--9. "OSPEEDR4,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "OSPEEDR3,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 4.--5. "OSPEEDR2,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "OSPEEDR1,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 0.--1. "OSPEEDR0,Port x configuration bits (y = 0..15)" "0,1,2,3"
group.long 0x0C++0x03
line.long 0x00 "PUPDR,GPIO port pull-up/pull-down register"
bitfld.long 0x00 30.--31. "PUPDR15,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 28.--29. "PUPDR14,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "PUPDR13,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 24.--25. "PUPDR12,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 22.--23. "PUPDR11,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 20.--21. "PUPDR10,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 18.--19. "PUPDR9,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 16.--17. "PUPDR8,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 14.--15. "PUPDR7,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 12.--13. "PUPDR6,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "PUPDR5,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 8.--9. "PUPDR4,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "PUPDR3,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 4.--5. "PUPDR2,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "PUPDR1,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 0.--1. "PUPDR0,Port x configuration bits (y = 0..15)" "0,1,2,3"
rgroup.long 0x10++0x03
line.long 0x00 "IDR,GPIO port input data register"
bitfld.long 0x00 15. "IDR15,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 14. "IDR14,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "IDR13,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 12. "IDR12,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 11. "IDR11,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 10. "IDR10,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 9. "IDR9,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 8. "IDR8,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 7. "IDR7,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 6. "IDR6,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "IDR5,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 4. "IDR4,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "IDR3,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 2. "IDR2,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "IDR1,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 0. "IDR0,Port input data (y = 0..15)" "0,1"
group.long 0x14++0x03
line.long 0x00 "ODR,GPIO port output data register"
bitfld.long 0x00 15. "ODR15,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 14. "ODR14,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "ODR13,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 12. "ODR12,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 11. "ODR11,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 10. "ODR10,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 9. "ODR9,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 8. "ODR8,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 7. "ODR7,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 6. "ODR6,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "ODR5,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 4. "ODR4,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "ODR3,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 2. "ODR2,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "ODR1,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 0. "ODR0,Port output data (y = 0..15)" "0,1"
wgroup.long 0x18++0x03
line.long 0x00 "BSRR,GPIO port bit set/reset register"
bitfld.long 0x00 31. "BR15,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 30. "BR14,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 29. "BR13,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 28. "BR12,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 27. "BR11,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 26. "BR10,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 25. "BR9,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 24. "BR8,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 23. "BR7,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 22. "BR6,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 21. "BR5,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 20. "BR4,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 19. "BR3,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 18. "BR2,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 17. "BR1,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 16. "BR0,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 15. "BS15,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 14. "BS14,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 13. "BS13,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 12. "BS12,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 11. "BS11,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 10. "BS10,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 9. "BS9,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 8. "BS8,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 7. "BS7,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 6. "BS6,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 5. "BS5,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 4. "BS4,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 3. "BS3,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 2. "BS2,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 1. "BS1,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 0. "BS0,Port x set bit y (y= 0..15)" "0,1"
group.long 0x1C++0x03
line.long 0x00 "LCKR,GPIO port configuration lock register"
bitfld.long 0x00 16. "LCKK,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 15. "LCK15,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 14. "LCK14,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 13. "LCK13,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 12. "LCK12,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 11. "LCK11,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 10. "LCK10,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 9. "LCK9,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 8. "LCK8,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 7. "LCK7,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 6. "LCK6,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 5. "LCK5,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 4. "LCK4,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 3. "LCK3,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 2. "LCK2,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 1. "LCK1,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 0. "LCK0,Port x lock bit y (y= 0..15)" "0,1"
group.long 0x20++0x03
line.long 0x00 "AFRL,GPIO alternate function low register"
bitfld.long 0x00 28.--31. "AFRL7,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "AFRL6,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "AFRL5,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "AFRL4,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "AFRL3,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "AFRL2,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "AFRL1,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "AFRL0,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x24++0x03
line.long 0x00 "AFRH,GPIO alternate function high register"
bitfld.long 0x00 28.--31. "AFRH15,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "AFRH14,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "AFRH13,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "AFRH12,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "AFRH11,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "AFRH10,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "AFRH9,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "AFRH8,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x28++0x03
line.long 0x00 "BRR,GPIO port bit reset register"
bitfld.long 0x00 15. "BR15,Port Reset bit" "0,1"
bitfld.long 0x00 14. "BR14,Port Reset bit" "0,1"
newline
bitfld.long 0x00 13. "BR13,Port Reset bit" "0,1"
bitfld.long 0x00 12. "BR12,Port Reset bit" "0,1"
newline
bitfld.long 0x00 11. "BR11,Port Reset bit" "0,1"
bitfld.long 0x00 10. "BR10,Port Reset bit" "0,1"
newline
bitfld.long 0x00 9. "BR9,Port Reset bit" "0,1"
bitfld.long 0x00 8. "BR8,Port Reset bit" "0,1"
newline
bitfld.long 0x00 7. "BR7,Port Reset bit" "0,1"
bitfld.long 0x00 6. "BR6,Port Reset bit" "0,1"
newline
bitfld.long 0x00 5. "BR5,Port Reset bit" "0,1"
bitfld.long 0x00 4. "BR4,Port Reset bit" "0,1"
newline
bitfld.long 0x00 3. "BR3,Port Reset bit" "0,1"
bitfld.long 0x00 2. "BR2,Port Reset bit" "0,1"
newline
bitfld.long 0x00 1. "BR1,Port Reset bit" "0,1"
bitfld.long 0x00 0. "BR0,Port Reset bit" "0,1"
tree.end
tree "GPIOB"
base ad:0x48000400
group.long 0x00++0x03
line.long 0x00 "MODER,GPIO port mode register"
bitfld.long 0x00 30.--31. "MODER15,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 28.--29. "MODER14,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "MODER13,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 24.--25. "MODER12,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 22.--23. "MODER11,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 20.--21. "MODER10,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 18.--19. "MODER9,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 16.--17. "MODER8,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 14.--15. "MODER7,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 12.--13. "MODER6,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MODER5,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 8.--9. "MODER4,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "MODER3,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 4.--5. "MODER2,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "MODER1,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 0.--1. "MODER0,Port x configuration bits (y = 0..15)" "0,1,2,3"
group.long 0x04++0x03
line.long 0x00 "OTYPER,GPIO port output type register"
bitfld.long 0x00 15. "OT15,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 14. "OT14,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "OT13,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 12. "OT12,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 11. "OT11,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 10. "OT10,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 9. "OT9,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 8. "OT8,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 7. "OT7,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 6. "OT6,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "OT5,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 4. "OT4,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "OT3,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 2. "OT2,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "OT1,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 0. "OT0,Port x configuration bits (y = 0..15)" "0,1"
group.long 0x08++0x03
line.long 0x00 "OSPEEDR,GPIO port output speed register"
bitfld.long 0x00 30.--31. "OSPEEDR15,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 28.--29. "OSPEEDR14,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "OSPEEDR13,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 24.--25. "OSPEEDR12,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 22.--23. "OSPEEDR11,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 20.--21. "OSPEEDR10,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 18.--19. "OSPEEDR9,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 16.--17. "OSPEEDR8,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 14.--15. "OSPEEDR7,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 12.--13. "OSPEEDR6,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "OSPEEDR5,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 8.--9. "OSPEEDR4,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "OSPEEDR3,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 4.--5. "OSPEEDR2,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "OSPEEDR1,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 0.--1. "OSPEEDR0,Port x configuration bits (y = 0..15)" "0,1,2,3"
group.long 0x0C++0x03
line.long 0x00 "PUPDR,GPIO port pull-up/pull-down register"
bitfld.long 0x00 30.--31. "PUPDR15,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 28.--29. "PUPDR14,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "PUPDR13,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 24.--25. "PUPDR12,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 22.--23. "PUPDR11,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 20.--21. "PUPDR10,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 18.--19. "PUPDR9,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 16.--17. "PUPDR8,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 14.--15. "PUPDR7,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 12.--13. "PUPDR6,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "PUPDR5,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 8.--9. "PUPDR4,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "PUPDR3,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 4.--5. "PUPDR2,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "PUPDR1,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 0.--1. "PUPDR0,Port x configuration bits (y = 0..15)" "0,1,2,3"
rgroup.long 0x10++0x03
line.long 0x00 "IDR,GPIO port input data register"
bitfld.long 0x00 15. "IDR15,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 14. "IDR14,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "IDR13,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 12. "IDR12,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 11. "IDR11,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 10. "IDR10,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 9. "IDR9,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 8. "IDR8,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 7. "IDR7,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 6. "IDR6,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "IDR5,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 4. "IDR4,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "IDR3,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 2. "IDR2,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "IDR1,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 0. "IDR0,Port input data (y = 0..15)" "0,1"
group.long 0x14++0x03
line.long 0x00 "ODR,GPIO port output data register"
bitfld.long 0x00 15. "ODR15,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 14. "ODR14,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "ODR13,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 12. "ODR12,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 11. "ODR11,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 10. "ODR10,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 9. "ODR9,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 8. "ODR8,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 7. "ODR7,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 6. "ODR6,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "ODR5,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 4. "ODR4,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "ODR3,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 2. "ODR2,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "ODR1,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 0. "ODR0,Port output data (y = 0..15)" "0,1"
wgroup.long 0x18++0x03
line.long 0x00 "BSRR,GPIO port bit set/reset register"
bitfld.long 0x00 31. "BR15,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 30. "BR14,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 29. "BR13,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 28. "BR12,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 27. "BR11,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 26. "BR10,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 25. "BR9,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 24. "BR8,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 23. "BR7,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 22. "BR6,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 21. "BR5,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 20. "BR4,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 19. "BR3,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 18. "BR2,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 17. "BR1,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 16. "BR0,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 15. "BS15,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 14. "BS14,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 13. "BS13,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 12. "BS12,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 11. "BS11,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 10. "BS10,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 9. "BS9,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 8. "BS8,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 7. "BS7,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 6. "BS6,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 5. "BS5,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 4. "BS4,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 3. "BS3,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 2. "BS2,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 1. "BS1,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 0. "BS0,Port x set bit y (y= 0..15)" "0,1"
group.long 0x1C++0x03
line.long 0x00 "LCKR,GPIO port configuration lock register"
bitfld.long 0x00 16. "LCKK,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 15. "LCK15,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 14. "LCK14,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 13. "LCK13,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 12. "LCK12,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 11. "LCK11,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 10. "LCK10,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 9. "LCK9,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 8. "LCK8,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 7. "LCK7,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 6. "LCK6,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 5. "LCK5,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 4. "LCK4,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 3. "LCK3,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 2. "LCK2,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 1. "LCK1,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 0. "LCK0,Port x lock bit y (y= 0..15)" "0,1"
group.long 0x20++0x03
line.long 0x00 "AFRL,GPIO alternate function low register"
bitfld.long 0x00 28.--31. "AFRL7,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "AFRL6,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "AFRL5,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "AFRL4,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "AFRL3,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "AFRL2,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "AFRL1,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "AFRL0,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x24++0x03
line.long 0x00 "AFRH,GPIO alternate function high register"
bitfld.long 0x00 28.--31. "AFRH15,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "AFRH14,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "AFRH13,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "AFRH12,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "AFRH11,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "AFRH10,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "AFRH9,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "AFRH8,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x28++0x03
line.long 0x00 "BRR,GPIO port bit reset register"
bitfld.long 0x00 15. "BR15,Port Reset bit" "0,1"
bitfld.long 0x00 14. "BR14,Port Reset bit" "0,1"
newline
bitfld.long 0x00 13. "BR13,Port Reset bit" "0,1"
bitfld.long 0x00 12. "BR12,Port Reset bit" "0,1"
newline
bitfld.long 0x00 11. "BR11,Port Reset bit" "0,1"
bitfld.long 0x00 10. "BR10,Port Reset bit" "0,1"
newline
bitfld.long 0x00 9. "BR9,Port Reset bit" "0,1"
bitfld.long 0x00 8. "BR8,Port Reset bit" "0,1"
newline
bitfld.long 0x00 7. "BR7,Port Reset bit" "0,1"
bitfld.long 0x00 6. "BR6,Port Reset bit" "0,1"
newline
bitfld.long 0x00 5. "BR5,Port Reset bit" "0,1"
bitfld.long 0x00 4. "BR4,Port Reset bit" "0,1"
newline
bitfld.long 0x00 3. "BR3,Port Reset bit" "0,1"
bitfld.long 0x00 2. "BR2,Port Reset bit" "0,1"
newline
bitfld.long 0x00 1. "BR1,Port Reset bit" "0,1"
bitfld.long 0x00 0. "BR0,Port Reset bit" "0,1"
tree.end
tree "GPIOC"
base ad:0x48000800
group.long 0x00++0x03
line.long 0x00 "MODER,GPIO port mode register"
bitfld.long 0x00 30.--31. "MODER15,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 28.--29. "MODER14,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "MODER13,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 12.--13. "MODER6,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "MODER5,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 8.--9. "MODER4,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "MODER3,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 4.--5. "MODER2,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "MODER1,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 0.--1. "MODER0,Port x configuration bits (y = 0..15)" "0,1,2,3"
group.long 0x04++0x03
line.long 0x00 "OTYPER,GPIO port output type register"
bitfld.long 0x00 15. "OT15,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 14. "OT14,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "OT13,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 6. "OT6,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "OT5,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 4. "OT4,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "OT3,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 2. "OT2,Port x configuration bits (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "OT1,Port x configuration bits (y = 0..15)" "0,1"
bitfld.long 0x00 0. "OT0,Port x configuration bits (y = 0..15)" "0,1"
group.long 0x08++0x03
line.long 0x00 "OSPEEDR,GPIO port output speed register"
bitfld.long 0x00 30.--31. "OSPEEDR15,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 28.--29. "OSPEEDR14,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "OSPEEDR13,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 12.--13. "OSPEEDR6,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "OSPEEDR5,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 8.--9. "OSPEEDR4,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "OSPEEDR3,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 4.--5. "OSPEEDR2,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "OSPEEDR1,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 0.--1. "OSPEEDR0,Port x configuration bits (y = 0..15)" "0,1,2,3"
group.long 0x0C++0x03
line.long 0x00 "PUPDR,GPIO port pull-up/pull-down register"
bitfld.long 0x00 30.--31. "PUPDR15,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 28.--29. "PUPDR14,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 26.--27. "PUPDR13,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 12.--13. "PUPDR6,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "PUPDR5,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 8.--9. "PUPDR4,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "PUPDR3,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 4.--5. "PUPDR2,Port x configuration bits (y = 0..15)" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "PUPDR1,Port x configuration bits (y = 0..15)" "0,1,2,3"
bitfld.long 0x00 0.--1. "PUPDR0,Port x configuration bits (y = 0..15)" "0,1,2,3"
rgroup.long 0x10++0x03
line.long 0x00 "IDR,GPIO port input data register"
bitfld.long 0x00 15. "IDR15,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 14. "IDR14,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "IDR13,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 6. "IDR6,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "IDR5,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 4. "IDR4,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "IDR3,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 2. "IDR2,Port input data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "IDR1,Port input data (y = 0..15)" "0,1"
bitfld.long 0x00 0. "IDR0,Port input data (y = 0..15)" "0,1"
group.long 0x14++0x03
line.long 0x00 "ODR,GPIO port output data register"
bitfld.long 0x00 15. "ODR15,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 14. "ODR14,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 13. "ODR13,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 6. "ODR6,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 5. "ODR5,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 4. "ODR4,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 3. "ODR3,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 2. "ODR2,Port output data (y = 0..15)" "0,1"
newline
bitfld.long 0x00 1. "ODR1,Port output data (y = 0..15)" "0,1"
bitfld.long 0x00 0. "ODR0,Port output data (y = 0..15)" "0,1"
wgroup.long 0x18++0x03
line.long 0x00 "BSRR,GPIO port bit set/reset register"
bitfld.long 0x00 31. "BR15,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 30. "BR14,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 29. "BR13,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 22. "BR6,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 21. "BR5,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 20. "BR4,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 19. "BR3,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 18. "BR2,Port x reset bit y (y = 0..15)" "0,1"
newline
bitfld.long 0x00 17. "BR1,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 16. "BR0,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 15. "BS15,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 14. "BS14,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 13. "BS13,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 6. "BS6,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 5. "BS5,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 4. "BS4,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 3. "BS3,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 2. "BS2,Port x set bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 1. "BS1,Port x set bit y (y= 0..15)" "0,1"
bitfld.long 0x00 0. "BS0,Port x set bit y (y= 0..15)" "0,1"
group.long 0x1C++0x03
line.long 0x00 "LCKR,GPIO port configuration lock register"
bitfld.long 0x00 16. "LCKK,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 15. "LCK15,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 14. "LCK14,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 13. "LCK13,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 6. "LCK6,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 5. "LCK5,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 4. "LCK4,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 3. "LCK3,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 2. "LCK2,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 1. "LCK1,Port x lock bit y (y= 0..15)" "0,1"
newline
bitfld.long 0x00 0. "LCK0,Port x lock bit y (y= 0..15)" "0,1"
group.long 0x20++0x03
line.long 0x00 "AFRL,GPIO alternate function low register"
bitfld.long 0x00 28.--31. "AFRL7,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "AFRL6,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "AFRL5,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "AFRL4,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "AFRL3,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "AFRL2,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "AFRL1,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "AFRL0,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x24++0x03
line.long 0x00 "AFRH,GPIO alternate function high register"
bitfld.long 0x00 28.--31. "AFRH15,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "AFRH14,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "AFRH13,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "AFRH12,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "AFRH11,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "AFRH10,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "AFRH9,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "AFRH8,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x28++0x03
line.long 0x00 "BRR,GPIO port bit reset register"
bitfld.long 0x00 15. "BR15,Port Reset bit" "0,1"
bitfld.long 0x00 14. "BR14,Port Reset bit" "0,1"
newline
bitfld.long 0x00 13. "BR13,Port Reset bit" "0,1"
bitfld.long 0x00 6. "BR6,Port Reset bit" "0,1"
newline
bitfld.long 0x00 5. "BR5,Port Reset bit" "0,1"
bitfld.long 0x00 4. "BR4,Port Reset bit" "0,1"
newline
bitfld.long 0x00 3. "BR3,Port Reset bit" "0,1"
bitfld.long 0x00 2. "BR2,Port Reset bit" "0,1"
newline
bitfld.long 0x00 1. "BR1,Port Reset bit" "0,1"
bitfld.long 0x00 0. "BR0,Port Reset bit" "0,1"
tree.end
tree "GPIOH"
base ad:0x48001C00
group.long 0x00++0x03
line.long 0x00 "MODER,GPIO port mode register"
bitfld.long 0x00 6.--7. "MODER3,Port x configuration bits (y = 0..15)" "0,1,2,3"
group.long 0x04++0x03
line.long 0x00 "OTYPER,GPIO port output type register"
bitfld.long 0x00 3. "OT3,Port x configuration bits (y = 0..15)" "0,1"
group.long 0x08++0x03
line.long 0x00 "OSPEEDR,GPIO port output speed register"
bitfld.long 0x00 6.--7. "OSPEEDR3,Port x configuration bits (y = 0..15)" "0,1,2,3"
group.long 0x0C++0x03
line.long 0x00 "PUPDR,GPIO port pull-up/pull-down register"
bitfld.long 0x00 6.--7. "PUPDR3,Port x configuration bits (y = 0..15)" "0,1,2,3"
rgroup.long 0x10++0x03
line.long 0x00 "IDR,GPIO port input data register"
bitfld.long 0x00 3. "IDR3,Port input data (y = 0..15)" "0,1"
group.long 0x14++0x03
line.long 0x00 "ODR,GPIO port output data register"
bitfld.long 0x00 3. "ODR3,Port output data (y = 0..15)" "0,1"
wgroup.long 0x18++0x03
line.long 0x00 "BSRR,GPIO port bit set/reset register"
bitfld.long 0x00 19. "BR3,Port x reset bit y (y = 0..15)" "0,1"
bitfld.long 0x00 3. "BS3,Port x set bit y (y= 0..15)" "0,1"
group.long 0x1C++0x03
line.long 0x00 "LCKR,GPIO port configuration lock register"
bitfld.long 0x00 16. "LCKK,Port x lock bit y (y= 0..15)" "0,1"
bitfld.long 0x00 3. "LCK3,Port x lock bit y (y= 0..15)" "0,1"
group.long 0x20++0x03
line.long 0x00 "AFRL,GPIO alternate function low register"
bitfld.long 0x00 12.--15. "AFRL3,Alternate function selection for port x bit y (y = 0..7)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x24++0x03
line.long 0x00 "AFRH,GPIO alternate function high register"
bitfld.long 0x00 28.--31. "AFRH15,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "AFRH14,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "AFRH13,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "AFRH12,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "AFRH11,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "AFRH10,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "AFRH9,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "AFRH8,Alternate function selection for port x bit y (y = 8..15)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x28++0x03
line.long 0x00 "BRR,GPIO port bit reset register"
bitfld.long 0x00 3. "BR3,Port Reset bit" "0,1"
tree.end
tree.end
tree "GPTIM (General-purpose-timers)"
tree "TIM2"
base ad:0x40000000
group.long 0x00++0x03
line.long 0x00 "CR1,control register 1"
bitfld.long 0x00 11. "UIFREMAP,UIF status bit remapping" "0,1"
bitfld.long 0x00 8.--9. "CKD,Clock division" "0,1,2,3"
newline
bitfld.long 0x00 7. "ARPE,Auto-reload preload enable" "0,1"
bitfld.long 0x00 5.--6. "CMS,Center-aligned mode selection" "0,1,2,3"
newline
bitfld.long 0x00 4. "DIR,Direction" "0,1"
bitfld.long 0x00 3. "OPM,One-pulse mode" "0,1"
newline
bitfld.long 0x00 2. "URS,Update request source" "0,1"
bitfld.long 0x00 1. "UDIS,Update disable" "0,1"
newline
bitfld.long 0x00 0. "CEN,Counter enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,control register 2"
bitfld.long 0x00 7. "TI1S,TI1 selection" "0,1"
bitfld.long 0x00 4.--6. "MMS,Master mode selection" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3. "CCDS,Capture/compare DMA selection" "0,1"
group.long 0x08++0x03
line.long 0x00 "SMCR,slave mode control register"
bitfld.long 0x00 16. "SMS_3,Slave mode selection - bit 3" "0,1"
bitfld.long 0x00 15. "ETP,External trigger polarity" "0,1"
newline
bitfld.long 0x00 14. "ECE,External clock enable" "0,1"
bitfld.long 0x00 12.--13. "ETPS,External trigger prescaler" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "ETF,External trigger filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "MSM,Master/Slave mode" "0,1"
newline
bitfld.long 0x00 4.--6. "TS,Trigger selection" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "OCCS,OCREF clear selection" "0,1"
newline
bitfld.long 0x00 0.--2. "SMS,Slave mode selection" "0,1,2,3,4,5,6,7"
group.long 0x0C++0x03
line.long 0x00 "DIER,DMA/Interrupt enable register"
bitfld.long 0x00 12. "CC4DE,Capture/Compare 4 DMA request enable" "0,1"
bitfld.long 0x00 11. "CC3DE,Capture/Compare 3 DMA request enable" "0,1"
newline
bitfld.long 0x00 10. "CC2DE,Capture/Compare 2 DMA request enable" "0,1"
bitfld.long 0x00 9. "CC1DE,Capture/Compare 1 DMA request enable" "0,1"
newline
bitfld.long 0x00 8. "UDE,Update DMA request enable" "0,1"
bitfld.long 0x00 6. "TIE,Trigger interrupt enable" "0,1"
newline
bitfld.long 0x00 4. "CC4IE,Capture/Compare 4 interrupt enable" "0,1"
bitfld.long 0x00 3. "CC3IE,Capture/Compare 3 interrupt enable" "0,1"
newline
bitfld.long 0x00 2. "CC2IE,Capture/Compare 2 interrupt enable" "0,1"
bitfld.long 0x00 1. "CC1IE,Capture/Compare 1 interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "UIE,Update interrupt enable" "0,1"
group.long 0x10++0x03
line.long 0x00 "SR,status register"
bitfld.long 0x00 12. "CC4OF,Capture/Compare 4 overcapture flag" "0,1"
bitfld.long 0x00 11. "CC3OF,Capture/Compare 3 overcapture flag" "0,1"
newline
bitfld.long 0x00 10. "CC2OF,Capture/compare 2 overcapture flag" "0,1"
bitfld.long 0x00 9. "CC1OF,Capture/Compare 1 overcapture flag" "0,1"
newline
bitfld.long 0x00 6. "TIF,Trigger interrupt flag" "0,1"
bitfld.long 0x00 4. "CC4IF,Capture/Compare 4 interrupt flag" "0,1"
newline
bitfld.long 0x00 3. "CC3IF,Capture/Compare 3 interrupt flag" "0,1"
bitfld.long 0x00 2. "CC2IF,Capture/Compare 2 interrupt flag" "0,1"
newline
bitfld.long 0x00 1. "CC1IF,Capture/compare 1 interrupt flag" "0,1"
bitfld.long 0x00 0. "UIF,Update interrupt flag" "0,1"
wgroup.long 0x14++0x03
line.long 0x00 "EGR,event generation register"
bitfld.long 0x00 6. "TG,Trigger generation" "0,1"
bitfld.long 0x00 4. "CC4G,Capture/compare 4 generation" "0,1"
newline
bitfld.long 0x00 3. "CC3G,Capture/compare 3 generation" "0,1"
bitfld.long 0x00 2. "CC2G,Capture/compare 2 generation" "0,1"
newline
bitfld.long 0x00 1. "CC1G,Capture/compare 1 generation" "0,1"
bitfld.long 0x00 0. "UG,Update generation" "0,1"
group.long 0x18++0x03
line.long 0x00 "CCMR1_Output,capture/compare mode register 1 (output mode)"
bitfld.long 0x00 24. "OC2M_3,Output Compare 2 mode - bit 3" "0,1"
bitfld.long 0x00 16. "OC1M_3,Output Compare 1 mode - bit 3" "0,1"
newline
bitfld.long 0x00 15. "OC2CE,Output compare 2 clear enable" "0,1"
bitfld.long 0x00 12.--14. "OC2M,Output compare 2 mode" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 11. "OC2PE,Output compare 2 preload enable" "0,1"
bitfld.long 0x00 10. "OC2FE,Output compare 2 fast enable" "0,1"
newline
bitfld.long 0x00 8.--9. "CC2S,Capture/Compare 2 selection" "0,1,2,3"
bitfld.long 0x00 7. "OC1CE,Output compare 1 clear enable" "0,1"
newline
bitfld.long 0x00 4.--6. "OC1M,Output compare 1 mode" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "OC1PE,Output compare 1 preload enable" "0,1"
newline
bitfld.long 0x00 2. "OC1FE,Output compare 1 fast enable" "0,1"
bitfld.long 0x00 0.--1. "CC1S,Capture/Compare 1 selection" "0,1,2,3"
group.long 0x18++0x03
line.long 0x00 "CCMR1_Input,capture/compare mode register 1 (input mode)"
bitfld.long 0x00 12.--15. "IC2F,Input capture 2 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--11. "IC2PSC,Input capture 2 prescaler" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "CC2S,Capture/compare 2 selection" "0,1,2,3"
bitfld.long 0x00 4.--7. "IC1F,Input capture 1 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2.--3. "IC1PSC,Input capture 1 prescaler" "0,1,2,3"
bitfld.long 0x00 0.--1. "CC1S,Capture/Compare 1 selection" "0,1,2,3"
group.long 0x1C++0x03
line.long 0x00 "CCMR2_Output,capture/compare mode register 2 (output mode)"
bitfld.long 0x00 24. "OC4M_3,Output Compare 4 mode - bit 3" "0,1"
bitfld.long 0x00 16. "OC3M_3,Output Compare 3 mode - bit 3" "0,1"
newline
bitfld.long 0x00 15. "OC4CE,Output compare 4 clear enable" "0,1"
bitfld.long 0x00 12.--14. "OC4M,Output compare 4 mode" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 11. "OC4PE,Output compare 4 preload enable" "0,1"
bitfld.long 0x00 10. "OC4FE,Output compare 4 fast enable" "0,1"
newline
bitfld.long 0x00 8.--9. "CC4S,Capture/Compare 4 selection" "0,1,2,3"
bitfld.long 0x00 7. "OC3CE,Output compare 3 clear enable" "0,1"
newline
bitfld.long 0x00 4.--6. "OC3M,Output compare 3 mode" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3. "OC3PE,Output compare 3 preload enable" "0,1"
newline
bitfld.long 0x00 2. "OC3FE,Output compare 3 fast enable" "0,1"
bitfld.long 0x00 0.--1. "CC3S,Capture/Compare 3 selection" "0,1,2,3"
group.long 0x1C++0x03
line.long 0x00 "CCMR2_Input,capture/compare mode register 2 (input mode)"
bitfld.long 0x00 12.--15. "IC4F,Input capture 4 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--11. "IC4PSC,Input capture 4 prescaler" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "CC4S,Capture/Compare 4 selection" "0,1,2,3"
bitfld.long 0x00 4.--7. "IC3F,Input capture 3 filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2.--3. "IC3PSC,Input capture 3 prescaler" "0,1,2,3"
bitfld.long 0x00 0.--1. "CC3S,Capture/Compare 3 selection" "0,1,2,3"
group.long 0x20++0x03
line.long 0x00 "CCER,capture/compare enable register"
bitfld.long 0x00 15. "CC4NP,Capture/Compare 4 output Polarity" "0,1"
bitfld.long 0x00 13. "CC4P,Capture/Compare 3 output Polarity" "0,1"
newline
bitfld.long 0x00 12. "CC4E,Capture/Compare 4 output enable" "0,1"
bitfld.long 0x00 11. "CC3NP,Capture/Compare 3 output Polarity" "0,1"
newline
bitfld.long 0x00 9. "CC3P,Capture/Compare 3 output Polarity" "0,1"
bitfld.long 0x00 8. "CC3E,Capture/Compare 3 output enable" "0,1"
newline
bitfld.long 0x00 7. "CC2NP,Capture/Compare 2 output Polarity" "0,1"
bitfld.long 0x00 5. "CC2P,Capture/Compare 2 output Polarity" "0,1"
newline
bitfld.long 0x00 4. "CC2E,Capture/Compare 2 output enable" "0,1"
bitfld.long 0x00 3. "CC1NP,Capture/Compare 1 output Polarity" "0,1"
newline
bitfld.long 0x00 1. "CC1P,Capture/Compare 1 output Polarity" "0,1"
bitfld.long 0x00 0. "CC1E,Capture/Compare 1 output enable" "0,1"
group.long 0x24++0x03
line.long 0x00 "CNT,counter"
hexmask.long.word 0x00 16.--31. 1. "CNT_H,High counter value (TIM2 only)"
hexmask.long.word 0x00 0.--15. 1. "CNT_L,Low counter value"
group.long 0x28++0x03
line.long 0x00 "PSC,prescaler"
hexmask.long.word 0x00 0.--15. 1. "PSC,Prescaler value"
group.long 0x2C++0x03
line.long 0x00 "ARR,auto-reload register"
hexmask.long.word 0x00 16.--31. 1. "ARR_H,High Auto-reload value (TIM2 only)"
hexmask.long.word 0x00 0.--15. 1. "ARR_L,Low Auto-reload value"
group.long 0x34++0x03
line.long 0x00 "CCR1,capture/compare register 1"
hexmask.long.word 0x00 16.--31. 1. "CCR1_H,High Capture/Compare 1 value (TIM2 only)"
hexmask.long.word 0x00 0.--15. 1. "CCR1_L,Low Capture/Compare 1 value"
group.long 0x38++0x03
line.long 0x00 "CCR2,capture/compare register 2"
hexmask.long.word 0x00 16.--31. 1. "CCR2_H,High Capture/Compare 2 value (TIM2 only)"
hexmask.long.word 0x00 0.--15. 1. "CCR2_L,Low Capture/Compare 2 value"
group.long 0x3C++0x03
line.long 0x00 "CCR3,capture/compare register 3"
hexmask.long.word 0x00 16.--31. 1. "CCR3_H,High Capture/Compare value (TIM2 only)"
hexmask.long.word 0x00 0.--15. 1. "CCR3_L,Low Capture/Compare value"
group.long 0x40++0x03
line.long 0x00 "CCR4,capture/compare register 4"
hexmask.long.word 0x00 16.--31. 1. "CCR4_H,High Capture/Compare value (TIM2 only)"
hexmask.long.word 0x00 0.--15. 1. "CCR4_L,Low Capture/Compare value"
group.long 0x48++0x03
line.long 0x00 "DCR,DMA control register"
bitfld.long 0x00 8.--12. "DBL,DMA burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "DBA,DMA base address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x4C++0x03
line.long 0x00 "DMAR,DMA address for full transfer"
hexmask.long.word 0x00 0.--15. 1. "DMAB,DMA register for burst accesses"
group.long 0x50++0x03
line.long 0x00 "TIM2_OR1,TIM2 option register"
bitfld.long 0x00 2.--3. "TI4_RMP,Input capture 4 remap" "0,1,2,3"
bitfld.long 0x00 1. "ETR_RMP,External trigger remap" "0,1"
group.long 0x60++0x03
line.long 0x00 "TIM2_AF1,TIM2 alternate function option register 1"
bitfld.long 0x00 14.--17. "ETRSEL,External trigger source selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x68++0x03
line.long 0x00 "TIM2_TISEL,TIM2 timer input selection register"
bitfld.long 0x00 8.--11. "TI2SEL,TI2SEL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "TI1SEL,TI1SEL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "TIM16"
base ad:0x40014400
group.long 0x00++0x03
line.long 0x00 "CR1,TIM16/TIM17 control register 1"
bitfld.long 0x00 11. "UIFREMAP,UIF status bit remapping" "0,1"
bitfld.long 0x00 8.--9. "CKD,Clock division" "0,1,2,3"
newline
bitfld.long 0x00 7. "ARPE,Auto-reload preload enable" "0,1"
bitfld.long 0x00 3. "OPM,One pulse mode" "0,1"
newline
bitfld.long 0x00 2. "URS,Update request source" "0,1"
bitfld.long 0x00 1. "UDIS,Update disable" "0,1"
newline
bitfld.long 0x00 0. "CEN,Counter enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,TIM16/TIM17 control register 2"
bitfld.long 0x00 9. "OIS1N,OIS1N" "0,1"
bitfld.long 0x00 8. "OIS1,OIS1" "0,1"
newline
bitfld.long 0x00 3. "CCDS,CCDS" "0,1"
bitfld.long 0x00 2. "CCUS,CCUS" "0,1"
newline
bitfld.long 0x00 0. "CCPC,CCPC" "0,1"
group.long 0x0C++0x03
line.long 0x00 "DIER,TIM16/TIM17 DMA/interrupt enable register"
bitfld.long 0x00 13. "COMDE,COM DMA request enable" "0,1"
bitfld.long 0x00 9. "CC1DE,Capture/Compare 1 DMA request enable" "0,1"
newline
bitfld.long 0x00 8. "UDE,Update DMA request enable" "0,1"
bitfld.long 0x00 7. "BIE,Break interrupt enable" "0,1"
newline
bitfld.long 0x00 5. "COMIE,COM interrupt enable" "0,1"
bitfld.long 0x00 1. "CC1IE,Capture/Compare 1 interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "UIE,Update interrupt enable" "0,1"
group.long 0x10++0x03
line.long 0x00 "SR,TIM16/TIM17 status register"
bitfld.long 0x00 9. "CC1OF,Capture/Compare 1 overcapture flag" "0,1"
bitfld.long 0x00 7. "BIF,Break interrupt flag" "0,1"
newline
bitfld.long 0x00 5. "COMIF,COM interrupt flag" "0,1"
bitfld.long 0x00 1. "CC1IF,Capture/Compare 1 interrupt flag" "0,1"
newline
bitfld.long 0x00 0. "UIF,Update interrupt flag" "0,1"
wgroup.long 0x14++0x03
line.long 0x00 "EGR,TIM16/TIM17 event generation register"
bitfld.long 0x00 7. "BG,Break generation" "0,1"
bitfld.long 0x00 5. "COMG,Capture/Compare control update generation" "0,1"
newline
bitfld.long 0x00 1. "CC1G,Capture/Compare 1 generation" "0,1"
bitfld.long 0x00 0. "UG,Update generation" "0,1"
group.long 0x18++0x03
line.long 0x00 "CCMR1_Output,TIM16/TIM17 capture/compare mode register 1"
bitfld.long 0x00 16. "OC1M_3,OC1M" "0,1"
bitfld.long 0x00 4.--6. "OC1M,OC1M" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3. "OC1PE,OC1PE" "0,1"
bitfld.long 0x00 2. "OC1FE,OC1FE" "0,1"
newline
bitfld.long 0x00 0.--1. "CC1S,CC1S" "0,1,2,3"
group.long 0x18++0x03
line.long 0x00 "CCMR1_Input,TIM16/TIM17 capture/compare mode register 1"
bitfld.long 0x00 4.--7. "IC1F,IC1F" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 2.--3. "IC1PSC,IC1PSC" "0,1,2,3"
newline
bitfld.long 0x00 0.--1. "CC1S,CC1S" "0,1,2,3"
group.long 0x20++0x03
line.long 0x00 "CCER,TIM16/TIM17 capture/compare enable register"
bitfld.long 0x00 3. "CC1NP,Capture/Compare 1 complementary output polarity" "0,1"
bitfld.long 0x00 2. "CC1NE,Capture/Compare 1 complementary output enable" "0,1"
newline
bitfld.long 0x00 1. "CC1P,Capture/Compare 1 output polarity" "0,1"
bitfld.long 0x00 0. "CC1E,Capture/Compare 1 output enable" "0,1"
group.long 0x24++0x03
line.long 0x00 "CNT,TIM16/TIM17 counter"
rbitfld.long 0x00 31. "UIFCPYorRes,UIF Copy" "0,1"
hexmask.long.word 0x00 0.--15. 1. "CNT,CNT"
group.long 0x28++0x03
line.long 0x00 "PSC,TIM16/TIM17 prescaler"
hexmask.long.word 0x00 0.--15. 1. "PSC,Prescaler value"
group.long 0x2C++0x03
line.long 0x00 "ARR,TIM16/TIM17 auto-reload register"
hexmask.long.word 0x00 0.--15. 1. "ARR,Auto-reload value"
group.long 0x30++0x03
line.long 0x00 "RCR,TIM16/TIM17 repetition counter register"
hexmask.long.byte 0x00 0.--7. 1. "REP,Repetition counter value"
group.long 0x34++0x03
line.long 0x00 "CCR1,TIM16/TIM17 capture/compare register 1"
hexmask.long.word 0x00 0.--15. 1. "CCR1,Capture/Compare 1 value"
group.long 0x44++0x03
line.long 0x00 "BDTR,TIM16/TIM17 break and dead-time register"
bitfld.long 0x00 28. "BKBID,Break Bidirectional" "0,1"
bitfld.long 0x00 26. "BKDSRM,Break Disarm" "0,1"
newline
bitfld.long 0x00 16.--19. "BKF,Break filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "MOE,Main output enable" "0,1"
newline
bitfld.long 0x00 14. "AOE,Automatic output enable" "0,1"
bitfld.long 0x00 13. "BKP,Break polarity" "0,1"
newline
bitfld.long 0x00 12. "BKE,Break enable" "0,1"
bitfld.long 0x00 11. "OSSR,Off-state selection for Run mode" "0,1"
newline
bitfld.long 0x00 10. "OSSI,Off-state selection for Idle mode" "0,1"
bitfld.long 0x00 8.--9. "LOCK,Lock configuration" "0,1,2,3"
newline
hexmask.long.byte 0x00 0.--7. 1. "DT,Dead-time generator setup"
group.long 0x48++0x03
line.long 0x00 "DCR,TIM16/TIM17 DMA control register"
bitfld.long 0x00 8.--12. "DBL,DMA burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "DBA,DMA base address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x4C++0x03
line.long 0x00 "DMAR,TIM16/TIM17 DMA address for full transfer"
hexmask.long.word 0x00 0.--15. 1. "DMAB,DMA register for burst accesses"
group.long 0x50++0x03
line.long 0x00 "TIM16_OR1,TIM16 option register 1"
bitfld.long 0x00 0.--1. "TI1_RMP,Timer 17 input 1 connection" "0,1,2,3"
group.long 0x60++0x03
line.long 0x00 "TIM16_AF1,TIM16 alternate function register 1"
bitfld.long 0x00 11. "BKCMP2P,BRK COMP2 input polarity" "0,1"
bitfld.long 0x00 10. "BKCMP1P,BRK COMP1 input polarity" "0,1"
newline
bitfld.long 0x00 9. "BKINP,BRK BKIN input polarity" "0,1"
bitfld.long 0x00 2. "BKCMP2E,BRK COMP2 enable" "0,1"
newline
bitfld.long 0x00 1. "BKCMP1E,BRK COMP1 enable" "0,1"
bitfld.long 0x00 0. "BKINE,BRK BKIN input enable" "0,1"
group.long 0x68++0x03
line.long 0x00 "TIM16_TISEL,TIM16 input selection register"
bitfld.long 0x00 0.--3. "TISEL,TISEL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "TIM17"
base ad:0x40014800
group.long 0x00++0x03
line.long 0x00 "CR1,TIM16/TIM17 control register 1"
bitfld.long 0x00 11. "UIFREMAP,UIF status bit remapping" "0,1"
bitfld.long 0x00 8.--9. "CKD,Clock division" "0,1,2,3"
newline
bitfld.long 0x00 7. "ARPE,Auto-reload preload enable" "0,1"
bitfld.long 0x00 3. "OPM,One pulse mode" "0,1"
newline
bitfld.long 0x00 2. "URS,Update request source" "0,1"
bitfld.long 0x00 1. "UDIS,Update disable" "0,1"
newline
bitfld.long 0x00 0. "CEN,Counter enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,TIM16/TIM17 control register 2"
bitfld.long 0x00 9. "OIS1N,OIS1N" "0,1"
bitfld.long 0x00 8. "OIS1,OIS1" "0,1"
newline
bitfld.long 0x00 3. "CCDS,CCDS" "0,1"
bitfld.long 0x00 2. "CCUS,CCUS" "0,1"
newline
bitfld.long 0x00 0. "CCPC,CCPC" "0,1"
group.long 0x0C++0x03
line.long 0x00 "DIER,TIM16/TIM17 DMA/interrupt enable register"
bitfld.long 0x00 13. "COMDE,COM DMA request enable" "0,1"
bitfld.long 0x00 9. "CC1DE,Capture/Compare 1 DMA request enable" "0,1"
newline
bitfld.long 0x00 8. "UDE,Update DMA request enable" "0,1"
bitfld.long 0x00 7. "BIE,Break interrupt enable" "0,1"
newline
bitfld.long 0x00 5. "COMIE,COM interrupt enable" "0,1"
bitfld.long 0x00 1. "CC1IE,Capture/Compare 1 interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "UIE,Update interrupt enable" "0,1"
group.long 0x10++0x03
line.long 0x00 "SR,TIM16/TIM17 status register"
bitfld.long 0x00 9. "CC1OF,Capture/Compare 1 overcapture flag" "0,1"
bitfld.long 0x00 7. "BIF,Break interrupt flag" "0,1"
newline
bitfld.long 0x00 5. "COMIF,COM interrupt flag" "0,1"
bitfld.long 0x00 1. "CC1IF,Capture/Compare 1 interrupt flag" "0,1"
newline
bitfld.long 0x00 0. "UIF,Update interrupt flag" "0,1"
wgroup.long 0x14++0x03
line.long 0x00 "EGR,TIM16/TIM17 event generation register"
bitfld.long 0x00 7. "BG,Break generation" "0,1"
bitfld.long 0x00 5. "COMG,Capture/Compare control update generation" "0,1"
newline
bitfld.long 0x00 1. "CC1G,Capture/Compare 1 generation" "0,1"
bitfld.long 0x00 0. "UG,Update generation" "0,1"
group.long 0x18++0x03
line.long 0x00 "CCMR1_Output,TIM16/TIM17 capture/compare mode register 1"
bitfld.long 0x00 16. "OC1M_3,OC1M" "0,1"
bitfld.long 0x00 4.--6. "OC1M,OC1M" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3. "OC1PE,OC1PE" "0,1"
bitfld.long 0x00 2. "OC1FE,OC1FE" "0,1"
newline
bitfld.long 0x00 0.--1. "CC1S,CC1S" "0,1,2,3"
group.long 0x18++0x03
line.long 0x00 "CCMR1_Input,TIM16/TIM17 capture/compare mode register 1"
bitfld.long 0x00 4.--7. "IC1F,IC1F" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 2.--3. "IC1PSC,IC1PSC" "0,1,2,3"
newline
bitfld.long 0x00 0.--1. "CC1S,CC1S" "0,1,2,3"
group.long 0x20++0x03
line.long 0x00 "CCER,TIM16/TIM17 capture/compare enable register"
bitfld.long 0x00 3. "CC1NP,Capture/Compare 1 complementary output polarity" "0,1"
bitfld.long 0x00 2. "CC1NE,Capture/Compare 1 complementary output enable" "0,1"
newline
bitfld.long 0x00 1. "CC1P,Capture/Compare 1 output polarity" "0,1"
bitfld.long 0x00 0. "CC1E,Capture/Compare 1 output enable" "0,1"
group.long 0x24++0x03
line.long 0x00 "CNT,TIM16/TIM17 counter"
rbitfld.long 0x00 31. "UIFCPYorRes,UIF Copy" "0,1"
hexmask.long.word 0x00 0.--15. 1. "CNT,CNT"
group.long 0x28++0x03
line.long 0x00 "PSC,TIM16/TIM17 prescaler"
hexmask.long.word 0x00 0.--15. 1. "PSC,Prescaler value"
group.long 0x2C++0x03
line.long 0x00 "ARR,TIM16/TIM17 auto-reload register"
hexmask.long.word 0x00 0.--15. 1. "ARR,Auto-reload value"
group.long 0x30++0x03
line.long 0x00 "RCR,TIM16/TIM17 repetition counter register"
hexmask.long.byte 0x00 0.--7. 1. "REP,Repetition counter value"
group.long 0x34++0x03
line.long 0x00 "CCR1,TIM16/TIM17 capture/compare register 1"
hexmask.long.word 0x00 0.--15. 1. "CCR1,Capture/Compare 1 value"
group.long 0x44++0x03
line.long 0x00 "BDTR,TIM16/TIM17 break and dead-time register"
bitfld.long 0x00 28. "BKBID,Break Bidirectional" "0,1"
bitfld.long 0x00 26. "BKDSRM,Break Disarm" "0,1"
newline
bitfld.long 0x00 16.--19. "BKF,Break filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "MOE,Main output enable" "0,1"
newline
bitfld.long 0x00 14. "AOE,Automatic output enable" "0,1"
bitfld.long 0x00 13. "BKP,Break polarity" "0,1"
newline
bitfld.long 0x00 12. "BKE,Break enable" "0,1"
bitfld.long 0x00 11. "OSSR,Off-state selection for Run mode" "0,1"
newline
bitfld.long 0x00 10. "OSSI,Off-state selection for Idle mode" "0,1"
bitfld.long 0x00 8.--9. "LOCK,Lock configuration" "0,1,2,3"
newline
hexmask.long.byte 0x00 0.--7. 1. "DT,Dead-time generator setup"
group.long 0x48++0x03
line.long 0x00 "DCR,TIM16/TIM17 DMA control register"
bitfld.long 0x00 8.--12. "DBL,DMA burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "DBA,DMA base address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x4C++0x03
line.long 0x00 "DMAR,TIM16/TIM17 DMA address for full transfer"
hexmask.long.word 0x00 0.--15. 1. "DMAB,DMA register for burst accesses"
group.long 0x50++0x03
line.long 0x00 "TIM17_OR1,TIM17 option register 1"
bitfld.long 0x00 0.--1. "TI1_RMP,Timer 17 input 1 connection" "0,1,2,3"
group.long 0x60++0x03
line.long 0x00 "TIM17_AF1,TIM17 alternate function register 1"
bitfld.long 0x00 11. "BKCMP2P,BRK COMP2 input polarity" "0,1"
bitfld.long 0x00 10. "BKCMP1P,BRK COMP1 input polarity" "0,1"
newline
bitfld.long 0x00 9. "BKINP,BRK BKIN input polarity" "0,1"
bitfld.long 0x00 2. "BKCMP2E,BRK COMP2 enable" "0,1"
newline
bitfld.long 0x00 1. "BKCMP1E,BRK COMP1 enable" "0,1"
bitfld.long 0x00 0. "BKINE,BRK BKIN input enable" "0,1"
group.long 0x68++0x03
line.long 0x00 "TIM17_TISEL,TIM17 input selection register"
bitfld.long 0x00 0.--3. "TISEL,TISEL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree.end
tree "HSEM (Hardware semaphore)"
base ad:0x58001400
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x00)++0x03
line.long 0x00 "HSEM_R$1,HSEM register HSEM_R0 HSEM_R31"
bitfld.long 0x00 31. "LOCK,Lock indication" "0,1"
bitfld.long 0x00 8.--11. "MASTERID,Semaphore MASTERID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.byte 0x00 0.--7. 1. "PROCID,Semaphore ProcessID"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
rgroup.long ($2+0x80)++0x03
line.long 0x00 "HSEM_RLR$1,HSEM Read lock register"
bitfld.long 0x00 31. "LOCK,Lock indication" "0,1"
bitfld.long 0x00 8.--11. "MASTERID,Semaphore MASTERID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.byte 0x00 0.--7. 1. "PROCID,Semaphore ProcessID"
repeat.end
group.long 0x100++0x03
line.long 0x00 "HSEM_IER,HSEM Interrupt enable register"
bitfld.long 0x00 15. "ISE15,Interrupt semaphore n enable bit" "0,1"
bitfld.long 0x00 14. "ISE14,Interrupt semaphore n enable bit" "0,1"
newline
bitfld.long 0x00 13. "ISE13,Interrupt semaphore n enable bit" "0,1"
bitfld.long 0x00 12. "ISE12,Interrupt semaphore n enable bit" "0,1"
newline
bitfld.long 0x00 11. "ISE11,Interrupt semaphore n enable bit" "0,1"
bitfld.long 0x00 10. "ISE10,Interrupt semaphore n enable bit" "0,1"
newline
bitfld.long 0x00 9. "ISE9,Interrupt semaphore n enable bit" "0,1"
bitfld.long 0x00 8. "ISE8,Interrupt semaphore n enable bit" "0,1"
newline
bitfld.long 0x00 7. "ISE7,Interrupt semaphore n enable bit" "0,1"
bitfld.long 0x00 6. "ISE6,Interrupt semaphore n enable bit" "0,1"
newline
bitfld.long 0x00 5. "ISE5,Interrupt semaphore n enable bit" "0,1"
bitfld.long 0x00 4. "ISE4,Interrupt semaphore n enable bit" "0,1"
newline
bitfld.long 0x00 3. "ISE3,Interrupt semaphore n enable bit" "0,1"
bitfld.long 0x00 2. "ISE2,Interrupt semaphore n enable bit" "0,1"
newline
bitfld.long 0x00 1. "ISE1,Interrupt semaphore n enable bit" "0,1"
bitfld.long 0x00 0. "ISE0,Interrupt semaphore n enable bit" "0,1"
group.long 0x104++0x03
line.long 0x00 "HSEM_ICR,HSEM Interrupt clear register"
bitfld.long 0x00 15. "ISC15,Interrupt(N) semaphore n clear bit" "0,1"
bitfld.long 0x00 14. "ISC14,Interrupt(N) semaphore n clear bit" "0,1"
newline
bitfld.long 0x00 13. "ISC13,Interrupt(N) semaphore n clear bit" "0,1"
bitfld.long 0x00 12. "ISC12,Interrupt(N) semaphore n clear bit" "0,1"
newline
bitfld.long 0x00 11. "ISC11,Interrupt(N) semaphore n clear bit" "0,1"
bitfld.long 0x00 10. "ISC10,Interrupt(N) semaphore n clear bit" "0,1"
newline
bitfld.long 0x00 9. "ISC9,Interrupt(N) semaphore n clear bit" "0,1"
bitfld.long 0x00 8. "ISC8,Interrupt(N) semaphore n clear bit" "0,1"
newline
bitfld.long 0x00 7. "ISC7,Interrupt(N) semaphore n clear bit" "0,1"
bitfld.long 0x00 6. "ISC6,Interrupt(N) semaphore n clear bit" "0,1"
newline
bitfld.long 0x00 5. "ISC5,Interrupt(N) semaphore n clear bit" "0,1"
bitfld.long 0x00 4. "ISC4,Interrupt(N) semaphore n clear bit" "0,1"
newline
bitfld.long 0x00 3. "ISC3,Interrupt(N) semaphore n clear bit" "0,1"
bitfld.long 0x00 2. "ISC2,Interrupt(N) semaphore n clear bit" "0,1"
newline
bitfld.long 0x00 1. "ISC1,Interrupt(N) semaphore n clear bit" "0,1"
bitfld.long 0x00 0. "ISC0,Interrupt(N) semaphore n clear bit" "0,1"
rgroup.long 0x108++0x03
line.long 0x00 "HSEM_ISR,HSEM Interrupt status register"
bitfld.long 0x00 15. "ISF15,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
bitfld.long 0x00 14. "ISF14,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
newline
bitfld.long 0x00 13. "ISF13,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
bitfld.long 0x00 12. "ISF12,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
newline
bitfld.long 0x00 11. "ISF11,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
bitfld.long 0x00 10. "ISF10,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
newline
bitfld.long 0x00 9. "ISF9,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
bitfld.long 0x00 8. "ISF8,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
newline
bitfld.long 0x00 7. "ISF7,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
bitfld.long 0x00 6. "ISF6,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
newline
bitfld.long 0x00 5. "ISF5,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
bitfld.long 0x00 4. "ISF4,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
newline
bitfld.long 0x00 3. "ISF3,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
bitfld.long 0x00 2. "ISF2,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
newline
bitfld.long 0x00 1. "ISF1,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
bitfld.long 0x00 0. "ISF0,Interrupt(N) semaphore n status bit before enable (mask)" "0,1"
rgroup.long 0x10C++0x03
line.long 0x00 "HSEM_MISR,HSEM Masked interrupt status register"
bitfld.long 0x00 15. "MISF15,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
bitfld.long 0x00 14. "MISF14,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
newline
bitfld.long 0x00 13. "MISF13,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
bitfld.long 0x00 12. "MISF12,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
newline
bitfld.long 0x00 11. "MISF11,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
bitfld.long 0x00 10. "MISF10,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
newline
bitfld.long 0x00 9. "MISF9,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
bitfld.long 0x00 8. "MISF8,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
newline
bitfld.long 0x00 7. "MISF7,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
bitfld.long 0x00 6. "MISF6,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
newline
bitfld.long 0x00 5. "MISF5,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
bitfld.long 0x00 4. "MISF4,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
newline
bitfld.long 0x00 3. "MISF3,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
bitfld.long 0x00 2. "MISF2,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
newline
bitfld.long 0x00 1. "MISF1,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
bitfld.long 0x00 0. "MISF0,masked interrupt(N) semaphore n status bit after enable (mask)" "0,1"
wgroup.long 0x140++0x03
line.long 0x00 "HSEM_CR,HSEM Clear register"
hexmask.long.word 0x00 16.--31. 1. "KEY,Semaphore clear Key"
bitfld.long 0x00 8.--11. "MASTERID,MASTERID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x144++0x03
line.long 0x00 "HSEM_KEYR,HSEM Interrupt clear register"
hexmask.long.word 0x00 16.--31. 1. "KEY,Semaphore Clear Key"
tree.end
tree "I2C (Inter-Integrated Circuit)"
repeat 3. (list 1. 2. 3.) (list ad:0x40005400 ad:0x40005800 ad:0x40005C00)
tree "I2C$1"
base $2
group.long 0x00++0x03
line.long 0x00 "CR1,Control register 1"
bitfld.long 0x00 23. "PECEN,PEC enable" "0,1"
bitfld.long 0x00 22. "ALERTEN,SMBUS alert enable" "0,1"
newline
bitfld.long 0x00 21. "SMBDEN,SMBus Device Default address enable" "0,1"
bitfld.long 0x00 20. "SMBHEN,SMBus Host address enable" "0,1"
newline
bitfld.long 0x00 19. "GCEN,General call enable" "0,1"
bitfld.long 0x00 18. "WUPEN,Wakeup from STOP enable" "0,1"
newline
bitfld.long 0x00 17. "NOSTRETCH,Clock stretching disable" "0,1"
bitfld.long 0x00 16. "SBC,Slave byte control" "0,1"
newline
bitfld.long 0x00 15. "RXDMAEN,DMA reception requests enable" "0,1"
bitfld.long 0x00 14. "TXDMAEN,DMA transmission requests enable" "0,1"
newline
bitfld.long 0x00 12. "ANFOFF,Analog noise filter OFF" "0,1"
bitfld.long 0x00 8.--11. "DNF,Digital noise filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 7. "ERRIE,Error interrupts enable" "0,1"
bitfld.long 0x00 6. "TCIE,Transfer Complete interrupt enable" "0,1"
newline
bitfld.long 0x00 5. "STOPIE,STOP detection Interrupt enable" "0,1"
bitfld.long 0x00 4. "NACKIE,Not acknowledge received interrupt enable" "0,1"
newline
bitfld.long 0x00 3. "ADDRIE,Address match interrupt enable (slave only)" "0,1"
bitfld.long 0x00 2. "RXIE,RX Interrupt enable" "0,1"
newline
bitfld.long 0x00 1. "TXIE,TX Interrupt enable" "0,1"
bitfld.long 0x00 0. "PE,Peripheral enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,Control register 2"
bitfld.long 0x00 26. "PECBYTE,Packet error checking byte" "0,1"
bitfld.long 0x00 25. "AUTOEND,Automatic end mode (master mode)" "0,1"
newline
bitfld.long 0x00 24. "RELOAD,NBYTES reload mode" "0,1"
hexmask.long.byte 0x00 16.--23. 1. "NBYTES,Number of bytes"
newline
bitfld.long 0x00 15. "NACK,NACK generation (slave mode)" "0,1"
bitfld.long 0x00 14. "STOP,Stop generation (master mode)" "0,1"
newline
bitfld.long 0x00 13. "START,Start generation" "0,1"
bitfld.long 0x00 12. "HEAD10R,10-bit address header only read direction (master receiver mode)" "0,1"
newline
bitfld.long 0x00 11. "ADD10,10-bit addressing mode (master mode)" "0,1"
bitfld.long 0x00 10. "RD_WRN,Transfer direction (master mode)" "0,1"
newline
hexmask.long.word 0x00 0.--9. 1. "SADD,Slave address bit (master mode)"
group.long 0x08++0x03
line.long 0x00 "OAR1,Own address register 1"
bitfld.long 0x00 15. "OA1EN,Own Address 1 enable" "0,1"
bitfld.long 0x00 10. "OA1MODE,Own Address 1 10-bit mode" "0,1"
newline
hexmask.long.word 0x00 0.--9. 1. "OA1,Interface address"
group.long 0x0C++0x03
line.long 0x00 "OAR2,Own address register 2"
bitfld.long 0x00 15. "OA2EN,Own Address 2 enable" "0,1"
bitfld.long 0x00 8.--10. "OA2MSK,Own Address 2 masks" "0,1,2,3,4,5,6,7"
newline
hexmask.long.byte 0x00 1.--7. 1. "OA2,Interface address"
group.long 0x10++0x03
line.long 0x00 "TIMINGR,Timing register"
bitfld.long 0x00 28.--31. "PRESC,Timing prescaler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 20.--23. "SCLDEL,Data setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. "SDADEL,Data hold time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 8.--15. 1. "SCLH,SCL high period (master mode)"
newline
hexmask.long.byte 0x00 0.--7. 1. "SCLL,SCL low period (master mode)"
group.long 0x14++0x03
line.long 0x00 "TIMEOUTR,Status register 1"
bitfld.long 0x00 31. "TEXTEN,Extended clock timeout enable" "0,1"
hexmask.long.word 0x00 16.--27. 1. "TIMEOUTB,Bus timeout B"
newline
bitfld.long 0x00 15. "TIMOUTEN,Clock timeout enable" "0,1"
bitfld.long 0x00 12. "TIDLE,Idle clock timeout detection" "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "TIMEOUTA,Bus timeout A"
group.long 0x18++0x03
line.long 0x00 "ISR,Interrupt and Status register"
hexmask.long.byte 0x00 17.--23. 1. "ADDCODE,Address match code (Slave mode)"
rbitfld.long 0x00 16. "DIR,Transfer direction (Slave mode)" "0,1"
newline
rbitfld.long 0x00 15. "BUSY,Bus busy" "0,1"
rbitfld.long 0x00 13. "ALERT,SMBus alert" "0,1"
newline
rbitfld.long 0x00 12. "TIMEOUT,Timeout or t_low detection flag" "0,1"
rbitfld.long 0x00 11. "PECERR,PEC Error in reception" "0,1"
newline
rbitfld.long 0x00 10. "OVR,Overrun/Underrun (slave mode)" "0,1"
rbitfld.long 0x00 9. "ARLO,Arbitration lost" "0,1"
newline
rbitfld.long 0x00 8. "BERR,Bus error" "0,1"
rbitfld.long 0x00 7. "TCR,Transfer Complete Reload" "0,1"
newline
rbitfld.long 0x00 6. "TC,Transfer Complete (master mode)" "0,1"
rbitfld.long 0x00 5. "STOPF,Stop detection flag" "0,1"
newline
rbitfld.long 0x00 4. "NACKF,Not acknowledge received flag" "0,1"
rbitfld.long 0x00 3. "ADDR,Address matched (slave mode)" "0,1"
newline
rbitfld.long 0x00 2. "RXNE,Receive data register not empty (receivers)" "0,1"
bitfld.long 0x00 1. "TXIS,Transmit interrupt status (transmitters)" "0,1"
newline
bitfld.long 0x00 0. "TXE,Transmit data register empty (transmitters)" "0,1"
wgroup.long 0x1C++0x03
line.long 0x00 "ICR,Interrupt clear register"
bitfld.long 0x00 13. "ALERTCF,Alert flag clear" "0,1"
bitfld.long 0x00 12. "TIMOUTCF,Timeout detection flag clear" "0,1"
newline
bitfld.long 0x00 11. "PECCF,PEC Error flag clear" "0,1"
bitfld.long 0x00 10. "OVRCF,Overrun/Underrun flag clear" "0,1"
newline
bitfld.long 0x00 9. "ARLOCF,Arbitration lost flag clear" "0,1"
bitfld.long 0x00 8. "BERRCF,Bus error flag clear" "0,1"
newline
bitfld.long 0x00 5. "STOPCF,Stop detection flag clear" "0,1"
bitfld.long 0x00 4. "NACKCF,Not Acknowledge flag clear" "0,1"
newline
bitfld.long 0x00 3. "ADDRCF,Address Matched flag clear" "0,1"
rgroup.long 0x20++0x03
line.long 0x00 "PECR,PEC register"
hexmask.long.byte 0x00 0.--7. 1. "PEC,Packet error checking register"
rgroup.long 0x24++0x03
line.long 0x00 "RXDR,Receive data register"
hexmask.long.byte 0x00 0.--7. 1. "RXDATA,8-bit receive data"
group.long 0x28++0x03
line.long 0x00 "TXDR,Transmit data register"
hexmask.long.byte 0x00 0.--7. 1. "TXDATA,8-bit transmit data"
tree.end
repeat.end
tree.end
tree "IWDG (Independent watchdog)"
base ad:0x40003000
wgroup.long 0x00++0x03
line.long 0x00 "KR,Key register"
hexmask.long.word 0x00 0.--15. 1. "KEY,Key value (write only read 0x0000)"
group.long 0x04++0x03
line.long 0x00 "PR,Prescaler register"
bitfld.long 0x00 0.--2. "PR,Prescaler divider" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "RLR,Reload register"
hexmask.long.word 0x00 0.--11. 1. "RL,Watchdog counter reload value"
rgroup.long 0x0C++0x03
line.long 0x00 "SR,Status register"
bitfld.long 0x00 2. "WVU,Watchdog counter window value update" "0,1"
bitfld.long 0x00 1. "RVU,Watchdog counter reload value update" "0,1"
newline
bitfld.long 0x00 0. "PVU,Watchdog prescaler value update" "0,1"
group.long 0x10++0x03
line.long 0x00 "WINR,Window register"
hexmask.long.word 0x00 0.--11. 1. "WIN,Watchdog counter window value"
tree.end
tree "LPTIM (Low-power timer)"
tree "LPTIM1"
base ad:0x40007C00
rgroup.long 0x00++0x03
line.long 0x00 "ISR,interrupt and status register"
bitfld.long 0x00 8. "REPOK,Repetition register update Ok" "0,1"
bitfld.long 0x00 7. "UE,LPTIM update event occurred" "0,1"
newline
bitfld.long 0x00 6. "DOWN,Counter direction change up to down" "0,1"
bitfld.long 0x00 5. "UP,Counter direction change down to up" "0,1"
newline
bitfld.long 0x00 4. "ARROK,Autoreload register update OK" "0,1"
bitfld.long 0x00 3. "CMPOK,Compare register update OK" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIG,External trigger edge event" "0,1"
bitfld.long 0x00 1. "ARRM,Autoreload match" "0,1"
newline
bitfld.long 0x00 0. "CMPM,Compare match" "0,1"
wgroup.long 0x04++0x03
line.long 0x00 "ICR,interrupt clear register"
bitfld.long 0x00 8. "REPOKCF,Repetition register update OK clear flag" "0,1"
bitfld.long 0x00 7. "UECF,Update event clear flag" "0,1"
newline
bitfld.long 0x00 6. "DOWNCF,Direction change to down Clear Flag" "0,1"
bitfld.long 0x00 5. "UPCF,Direction change to UP Clear Flag" "0,1"
newline
bitfld.long 0x00 4. "ARROKCF,Autoreload register update OK Clear Flag" "0,1"
bitfld.long 0x00 3. "CMPOKCF,Compare register update OK Clear Flag" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIGCF,External trigger valid edge Clear Flag" "0,1"
bitfld.long 0x00 1. "ARRMCF,Autoreload match Clear Flag" "0,1"
newline
bitfld.long 0x00 0. "CMPMCF,compare match Clear Flag" "0,1"
group.long 0x08++0x03
line.long 0x00 "IER,interrupt enable register"
bitfld.long 0x00 8. "REPOKIE,Repetition register update OK interrupt Enable" "0,1"
bitfld.long 0x00 7. "UEIE,Update event interrupt enable" "0,1"
newline
bitfld.long 0x00 6. "DOWNIE,Direction change to down Interrupt Enable" "0,1"
bitfld.long 0x00 5. "UPIE,Direction change to UP Interrupt Enable" "0,1"
newline
bitfld.long 0x00 4. "ARROKIE,Autoreload register update OK Interrupt Enable" "0,1"
bitfld.long 0x00 3. "CMPOKIE,Compare register update OK Interrupt Enable" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIGIE,External trigger valid edge Interrupt Enable" "0,1"
bitfld.long 0x00 1. "ARRMIE,Autoreload match Interrupt Enable" "0,1"
newline
bitfld.long 0x00 0. "CMPMIE,Compare match Interrupt Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CFGR,configuration register"
bitfld.long 0x00 24. "ENC,ENC" "0,1"
bitfld.long 0x00 23. "COUNTMODE,COUNTMODE" "0,1"
newline
bitfld.long 0x00 22. "PRELOAD,PRELOAD" "0,1"
bitfld.long 0x00 21. "WAVPOL,WAVPOL" "0,1"
newline
bitfld.long 0x00 20. "WAVE,WAVE" "0,1"
bitfld.long 0x00 19. "TIMOUT,TIMOUT" "0,1"
newline
bitfld.long 0x00 17.--18. "TRIGEN,TRIGEN" "0,1,2,3"
bitfld.long 0x00 13.--15. "TRIGSEL,TRIGSEL" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--11. "PRESC,PRESC" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--7. "TRGFLT,TRGFLT" "0,1,2,3"
newline
bitfld.long 0x00 3.--4. "CKFLT,CKFLT" "0,1,2,3"
bitfld.long 0x00 1.--2. "CKPOL,CKPOL" "0,1,2,3"
newline
bitfld.long 0x00 0. "CKSEL,CKSEL" "0,1"
group.long 0x10++0x03
line.long 0x00 "CR,control register"
bitfld.long 0x00 4. "RSTARE,RSTARE" "0,1"
bitfld.long 0x00 3. "COUNTRST,COUNTRST" "0,1"
newline
bitfld.long 0x00 2. "CNTSTRT,CNTSTRT" "0,1"
bitfld.long 0x00 1. "SNGSTRT,SNGSTRT" "0,1"
newline
bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1"
group.long 0x14++0x03
line.long 0x00 "CMP,compare register"
hexmask.long.word 0x00 0.--15. 1. "CMP,CMP"
group.long 0x18++0x03
line.long 0x00 "ARR,autoreload register"
hexmask.long.word 0x00 0.--15. 1. "ARR,Auto reload value"
rgroup.long 0x1C++0x03
line.long 0x00 "CNT,counter register"
hexmask.long.word 0x00 0.--15. 1. "CNT,Counter value"
group.long 0x20++0x03
line.long 0x00 "LPTIM1_OR,option register"
bitfld.long 0x00 1. "OR_1,Option register bit 1" "0,1"
bitfld.long 0x00 0. "OR_0,Option register bit 0" "0,1"
group.long 0x28++0x03
line.long 0x00 "RCR,repetition register"
hexmask.long.byte 0x00 0.--7. 1. "REP,Repetition register value"
tree.end
tree "LPTIM2"
base ad:0x40009400
rgroup.long 0x00++0x03
line.long 0x00 "ISR,interrupt and status register"
bitfld.long 0x00 8. "REPOK,Repetition register update Ok" "0,1"
bitfld.long 0x00 7. "UE,LPTIM update event occurred" "0,1"
newline
bitfld.long 0x00 6. "DOWN,Counter direction change up to down" "0,1"
bitfld.long 0x00 5. "UP,Counter direction change down to up" "0,1"
newline
bitfld.long 0x00 4. "ARROK,Autoreload register update OK" "0,1"
bitfld.long 0x00 3. "CMPOK,Compare register update OK" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIG,External trigger edge event" "0,1"
bitfld.long 0x00 1. "ARRM,Autoreload match" "0,1"
newline
bitfld.long 0x00 0. "CMPM,Compare match" "0,1"
wgroup.long 0x04++0x03
line.long 0x00 "ICR,interrupt clear register"
bitfld.long 0x00 8. "REPOKCF,Repetition register update OK clear flag" "0,1"
bitfld.long 0x00 7. "UECF,Update event clear flag" "0,1"
newline
bitfld.long 0x00 6. "DOWNCF,Direction change to down Clear Flag" "0,1"
bitfld.long 0x00 5. "UPCF,Direction change to UP Clear Flag" "0,1"
newline
bitfld.long 0x00 4. "ARROKCF,Autoreload register update OK Clear Flag" "0,1"
bitfld.long 0x00 3. "CMPOKCF,Compare register update OK Clear Flag" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIGCF,External trigger valid edge Clear Flag" "0,1"
bitfld.long 0x00 1. "ARRMCF,Autoreload match Clear Flag" "0,1"
newline
bitfld.long 0x00 0. "CMPMCF,compare match Clear Flag" "0,1"
group.long 0x08++0x03
line.long 0x00 "IER,interrupt enable register"
bitfld.long 0x00 8. "REPOKIE,Repetition register update OK interrupt Enable" "0,1"
bitfld.long 0x00 7. "UEIE,Update event interrupt enable" "0,1"
newline
bitfld.long 0x00 6. "DOWNIE,Direction change to down Interrupt Enable" "0,1"
bitfld.long 0x00 5. "UPIE,Direction change to UP Interrupt Enable" "0,1"
newline
bitfld.long 0x00 4. "ARROKIE,Autoreload register update OK Interrupt Enable" "0,1"
bitfld.long 0x00 3. "CMPOKIE,Compare register update OK Interrupt Enable" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIGIE,External trigger valid edge Interrupt Enable" "0,1"
bitfld.long 0x00 1. "ARRMIE,Autoreload match Interrupt Enable" "0,1"
newline
bitfld.long 0x00 0. "CMPMIE,Compare match Interrupt Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CFGR,configuration register"
bitfld.long 0x00 24. "ENC,ENC" "0,1"
bitfld.long 0x00 23. "COUNTMODE,COUNTMODE" "0,1"
newline
bitfld.long 0x00 22. "PRELOAD,PRELOAD" "0,1"
bitfld.long 0x00 21. "WAVPOL,WAVPOL" "0,1"
newline
bitfld.long 0x00 20. "WAVE,WAVE" "0,1"
bitfld.long 0x00 19. "TIMOUT,TIMOUT" "0,1"
newline
bitfld.long 0x00 17.--18. "TRIGEN,TRIGEN" "0,1,2,3"
bitfld.long 0x00 13.--15. "TRIGSEL,TRIGSEL" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--11. "PRESC,PRESC" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--7. "TRGFLT,TRGFLT" "0,1,2,3"
newline
bitfld.long 0x00 3.--4. "CKFLT,CKFLT" "0,1,2,3"
bitfld.long 0x00 1.--2. "CKPOL,CKPOL" "0,1,2,3"
newline
bitfld.long 0x00 0. "CKSEL,CKSEL" "0,1"
group.long 0x10++0x03
line.long 0x00 "CR,control register"
bitfld.long 0x00 4. "RSTARE,RSTARE" "0,1"
bitfld.long 0x00 3. "COUNTRST,COUNTRST" "0,1"
newline
bitfld.long 0x00 2. "CNTSTRT,CNTSTRT" "0,1"
bitfld.long 0x00 1. "SNGSTRT,SNGSTRT" "0,1"
newline
bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1"
group.long 0x14++0x03
line.long 0x00 "CMP,compare register"
hexmask.long.word 0x00 0.--15. 1. "CMP,CMP"
group.long 0x18++0x03
line.long 0x00 "ARR,autoreload register"
hexmask.long.word 0x00 0.--15. 1. "ARR,Auto reload value"
rgroup.long 0x1C++0x03
line.long 0x00 "CNT,counter register"
hexmask.long.word 0x00 0.--15. 1. "CNT,Counter value"
group.long 0x20++0x03
line.long 0x00 "LPTIM2_OR,option register"
bitfld.long 0x00 1. "OR_1,Option register bit 1" "0,1"
bitfld.long 0x00 0. "OR_0,Option register bit 0" "0,1"
group.long 0x28++0x03
line.long 0x00 "RCR,repetition register"
hexmask.long.byte 0x00 0.--7. 1. "REP,Repetition register value"
tree.end
tree "LPTIM3"
base ad:0x40009800
rgroup.long 0x00++0x03
line.long 0x00 "ISR,interrupt and status register"
bitfld.long 0x00 8. "REPOK,Repetition register update Ok" "0,1"
bitfld.long 0x00 7. "UE,LPTIM update event occurred" "0,1"
newline
bitfld.long 0x00 6. "DOWN,Counter direction change up to down" "0,1"
bitfld.long 0x00 5. "UP,Counter direction change down to up" "0,1"
newline
bitfld.long 0x00 4. "ARROK,Autoreload register update OK" "0,1"
bitfld.long 0x00 3. "CMPOK,Compare register update OK" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIG,External trigger edge event" "0,1"
bitfld.long 0x00 1. "ARRM,Autoreload match" "0,1"
newline
bitfld.long 0x00 0. "CMPM,Compare match" "0,1"
wgroup.long 0x04++0x03
line.long 0x00 "ICR,interrupt clear register"
bitfld.long 0x00 8. "REPOKCF,Repetition register update OK clear flag" "0,1"
bitfld.long 0x00 7. "UECF,Update event clear flag" "0,1"
newline
bitfld.long 0x00 6. "DOWNCF,Direction change to down Clear Flag" "0,1"
bitfld.long 0x00 5. "UPCF,Direction change to UP Clear Flag" "0,1"
newline
bitfld.long 0x00 4. "ARROKCF,Autoreload register update OK Clear Flag" "0,1"
bitfld.long 0x00 3. "CMPOKCF,Compare register update OK Clear Flag" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIGCF,External trigger valid edge Clear Flag" "0,1"
bitfld.long 0x00 1. "ARRMCF,Autoreload match Clear Flag" "0,1"
newline
bitfld.long 0x00 0. "CMPMCF,compare match Clear Flag" "0,1"
group.long 0x08++0x03
line.long 0x00 "IER,interrupt enable register"
bitfld.long 0x00 8. "REPOKIE,Repetition register update OK interrupt Enable" "0,1"
bitfld.long 0x00 7. "UEIE,Update event interrupt enable" "0,1"
newline
bitfld.long 0x00 6. "DOWNIE,Direction change to down Interrupt Enable" "0,1"
bitfld.long 0x00 5. "UPIE,Direction change to UP Interrupt Enable" "0,1"
newline
bitfld.long 0x00 4. "ARROKIE,Autoreload register update OK Interrupt Enable" "0,1"
bitfld.long 0x00 3. "CMPOKIE,Compare register update OK Interrupt Enable" "0,1"
newline
bitfld.long 0x00 2. "EXTTRIGIE,External trigger valid edge Interrupt Enable" "0,1"
bitfld.long 0x00 1. "ARRMIE,Autoreload match Interrupt Enable" "0,1"
newline
bitfld.long 0x00 0. "CMPMIE,Compare match Interrupt Enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CFGR,configuration register"
bitfld.long 0x00 24. "ENC,ENC" "0,1"
bitfld.long 0x00 23. "COUNTMODE,COUNTMODE" "0,1"
newline
bitfld.long 0x00 22. "PRELOAD,PRELOAD" "0,1"
bitfld.long 0x00 21. "WAVPOL,WAVPOL" "0,1"
newline
bitfld.long 0x00 20. "WAVE,WAVE" "0,1"
bitfld.long 0x00 19. "TIMOUT,TIMOUT" "0,1"
newline
bitfld.long 0x00 17.--18. "TRIGEN,TRIGEN" "0,1,2,3"
bitfld.long 0x00 13.--15. "TRIGSEL,TRIGSEL" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--11. "PRESC,PRESC" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--7. "TRGFLT,TRGFLT" "0,1,2,3"
newline
bitfld.long 0x00 3.--4. "CKFLT,CKFLT" "0,1,2,3"
bitfld.long 0x00 1.--2. "CKPOL,CKPOL" "0,1,2,3"
newline
bitfld.long 0x00 0. "CKSEL,CKSEL" "0,1"
group.long 0x10++0x03
line.long 0x00 "CR,control register"
bitfld.long 0x00 4. "RSTARE,RSTARE" "0,1"
bitfld.long 0x00 3. "COUNTRST,COUNTRST" "0,1"
newline
bitfld.long 0x00 2. "CNTSTRT,CNTSTRT" "0,1"
bitfld.long 0x00 1. "SNGSTRT,SNGSTRT" "0,1"
newline
bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1"
group.long 0x14++0x03
line.long 0x00 "CMP,compare register"
hexmask.long.word 0x00 0.--15. 1. "CMP,CMP"
group.long 0x18++0x03
line.long 0x00 "ARR,autoreload register"
hexmask.long.word 0x00 0.--15. 1. "ARR,Auto reload value"
rgroup.long 0x1C++0x03
line.long 0x00 "CNT,counter register"
hexmask.long.word 0x00 0.--15. 1. "CNT,Counter value"
group.long 0x20++0x03
line.long 0x00 "LPTIM3_OR,option register"
bitfld.long 0x00 1. "OR_1,Option register bit 1" "0,1"
bitfld.long 0x00 0. "OR_0,Option register bit 0" "0,1"
group.long 0x28++0x03
line.long 0x00 "RCR,repetition register"
hexmask.long.byte 0x00 0.--7. 1. "REP,Repetition register value"
tree.end
tree.end
tree "MPU (Memory protection unit)"
base ad:0xE000ED90
rgroup.long 0x00++0x03
line.long 0x00 "MPU_TYPER,MPU type register"
hexmask.long.byte 0x00 16.--23. 1. "IREGION,Number of MPU instruction regions"
hexmask.long.byte 0x00 8.--15. 1. "DREGION,Number of MPU data regions"
newline
bitfld.long 0x00 0. "SEPARATE,Separate flag" "0,1"
rgroup.long 0x04++0x03
line.long 0x00 "MPU_CTRL,MPU control register"
bitfld.long 0x00 2. "PRIVDEFENA,Enable priviliged software access to default memory map" "0,1"
bitfld.long 0x00 1. "HFNMIENA,Enables the operation of MPU during hard fault" "0,1"
newline
bitfld.long 0x00 0. "ENABLE,Enables the MPU" "0,1"
group.long 0x08++0x03
line.long 0x00 "MPU_RNR,MPU region number register"
hexmask.long.byte 0x00 0.--7. 1. "REGION,MPU region"
group.long 0x0C++0x03
line.long 0x00 "MPU_RBAR,MPU region base address register"
hexmask.long 0x00 5.--31. 1. "ADDR,Region base address field"
bitfld.long 0x00 4. "VALID,MPU region number valid" "0,1"
newline
bitfld.long 0x00 0.--3. "REGION,MPU region field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x10++0x03
line.long 0x00 "MPU_RASR,MPU region attribute and size register"
bitfld.long 0x00 28. "XN,Instruction access disable bit" "0,1"
bitfld.long 0x00 24.--26. "AP,Access permission" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 19.--21. "TEX,memory attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 18. "S,Shareable memory attribute" "0,1"
newline
bitfld.long 0x00 17. "C,memory attribute" "0,1"
bitfld.long 0x00 16. "B,memory attribute" "0,1"
newline
hexmask.long.byte 0x00 8.--15. 1. "SRD,Subregion disable bits"
bitfld.long 0x00 1.--5. "SIZE,Size of the MPU protection region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0. "ENABLE,Region enable bit" "0,1"
tree.end
tree "NVIC (Nested Vectored Interrupt Controller)"
tree "NVIC"
base ad:0xE000E100
repeat 2. (strings "0" "1" )(list 0x0 0x4 )
group.long ($2+0x00)++0x03
line.long 0x00 "ISER$1,Interrupt Set-Enable Register"
hexmask.long 0x00 0.--31. 1. "SETENA,SETENA"
repeat.end
repeat 2. (strings "0" "1" )(list 0x0 0x4 )
group.long ($2+0x80)++0x03
line.long 0x00 "ICER$1,Interrupt Clear-Enable Register"
hexmask.long 0x00 0.--31. 1. "CLRENA,CLRENA"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x04 )
group.long ($2+0x100)++0x03
line.long 0x00 "ISPR$1,Interrupt Set-Pending Register"
hexmask.long 0x00 0.--31. 1. "SETPEND,SETPEND"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x04 )
group.long ($2+0x180)++0x03
line.long 0x00 "ICPR$1,Interrupt Clear-Pending Register"
hexmask.long 0x00 0.--31. 1. "CLRPEND,CLRPEND"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x04 )
rgroup.long ($2+0x200)++0x03
line.long 0x00 "IABR$1,Interrupt Active Bit Register"
hexmask.long 0x00 0.--31. 1. "ACTIVE,ACTIVE"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x300)++0x03
line.long 0x00 "IPR$1,Interrupt Priority Register"
hexmask.long.byte 0x00 24.--31. 1. "IPR_N3,IPR_N3"
hexmask.long.byte 0x00 16.--23. 1. "IPR_N2,IPR_N2"
newline
hexmask.long.byte 0x00 8.--15. 1. "IPR_N1,IPR_N1"
hexmask.long.byte 0x00 0.--7. 1. "IPR_N0,IPR_N0"
repeat.end
repeat 2. (strings "16" "17" )(list 0x00 0x04 )
group.long ($2+0x340)++0x03
line.long 0x00 "IPR$1,Interrupt Priority Register"
hexmask.long.byte 0x00 24.--31. 1. "IPR_N3,IPR_N3"
hexmask.long.byte 0x00 16.--23. 1. "IPR_N2,IPR_N2"
newline
hexmask.long.byte 0x00 8.--15. 1. "IPR_N1,IPR_N1"
hexmask.long.byte 0x00 0.--7. 1. "IPR_N0,IPR_N0"
repeat.end
tree.end
tree "NVIC_STIR"
base ad:0xE000EF00
group.long 0x00++0x03
line.long 0x00 "STIR,Software trigger interrupt register"
hexmask.long.word 0x00 0.--8. 1. "INTID,Software generated interrupt ID"
tree.end
tree.end
tree "PKA (Public key accelerator)"
base ad:0x58002000
group.long 0x00++0x03
line.long 0x00 "CR,control register"
bitfld.long 0x00 20. "ADDRERRIE,Address error interrupt enable" "0,1"
bitfld.long 0x00 19. "RAMERRIE,RAM error interrupt enable" "0,1"
newline
bitfld.long 0x00 17. "PROCENDIE,PROCENDIE" "0,1"
bitfld.long 0x00 8.--13. "MODE,PKA operation code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 1. "START,start the operation" "0,1"
bitfld.long 0x00 0. "EN,PKA enable" "0,1"
rgroup.long 0x04++0x03
line.long 0x00 "SR,status register"
bitfld.long 0x00 20. "ADDRERRF,Address error flag" "0,1"
bitfld.long 0x00 19. "RAMERRF,PKA RAM error flag" "0,1"
newline
bitfld.long 0x00 17. "PROCENDF,PKA End of Operation flag" "0,1"
bitfld.long 0x00 16. "BUSY,PKA operation is in progressThis bit is set to 1 whenever START bit in the PKA_CR is set" "0,1"
wgroup.long 0x08++0x03
line.long 0x00 "CLRFR,clear flag register"
bitfld.long 0x00 20. "ADDRERRFC,Clear Address error flag" "0,1"
bitfld.long 0x00 19. "RAMERRFC,Clear PKA RAM error flag" "0,1"
newline
bitfld.long 0x00 17. "PROCENDFC,Clear PKA End of Operation flag" "0,1"
tree.end
tree "PWR (Power control)"
base ad:0x58000400
group.long 0x00++0x03
line.long 0x00 "CR1,Power control register 1"
bitfld.long 0x00 14. "LPR,Low-power run" "0,1"
bitfld.long 0x00 9.--10. "VOS,Voltage scaling range selection" "0,1,2,3"
newline
bitfld.long 0x00 8. "DBP,Disable backup domain write protection" "0,1"
bitfld.long 0x00 5. "FPDS,Flash memory power down mode during LPSleep for CPU1" "0,1"
newline
bitfld.long 0x00 4. "FPDR,Flash memory power down mode during LPRun for CPU1" "0,1"
bitfld.long 0x00 3. "SUBGHZSPINSSSEL,sub-GHz SPI NSS source select" "0,1"
newline
bitfld.long 0x00 0.--2. "LPMS,Low-power mode selection for CPU1" "0,1,2,3,4,5,6,7"
group.long 0x04++0x03
line.long 0x00 "CR2,Power control register 2"
bitfld.long 0x00 6. "PVME3,Peripheral voltage monitoring 3 enable: VDDA vs" "0,1"
bitfld.long 0x00 1.--3. "PLS,Power voltage detector level selection" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0. "PVDE,Power voltage detector enable" "0,1"
group.long 0x08++0x03
line.long 0x00 "CR3,Power control register 3"
bitfld.long 0x00 15. "EIWUL,Enable internal wakeup line for CPU1" "0,1"
bitfld.long 0x00 13. "EWRFIRQ,akeup for CPU1" "0,1"
newline
bitfld.long 0x00 11. "EWRFBUSY,Enable Radio BUSY Wakeup from Standby for CPU1" "0,1"
bitfld.long 0x00 10. "APC,Apply pull-up and pull-down configuration from CPU1" "0,1"
newline
bitfld.long 0x00 9. "RRS,SRAM2 retention in Standby mode" "0,1"
bitfld.long 0x00 8. "EWPVD,Enable wakeup PVD for CPU1" "0,1"
newline
bitfld.long 0x00 7. "EULPEN,Ultra-low-power enable" "0,1"
bitfld.long 0x00 2. "EWUP3,Enable Wakeup pin WKUP3 for CPU1" "0,1"
newline
bitfld.long 0x00 1. "EWUP2,Enable Wakeup pin WKUP2 for CPU1" "0,1"
bitfld.long 0x00 0. "EWUP1,Enable Wakeup pin WKUP1 for CPU1" "0,1"
group.long 0x0C++0x03
line.long 0x00 "CR4,Power control register 4"
bitfld.long 0x00 11. "WRFBUSYP,Wakeup Radio BUSY polarity" "0,1"
bitfld.long 0x00 9. "VBRS,VBAT battery charging resistor selection" "0,1"
newline
bitfld.long 0x00 8. "VBE,VBAT battery charging enable" "0,1"
bitfld.long 0x00 2. "WP3,Wakeup pin WKUP3 polarity" "0,1"
newline
bitfld.long 0x00 1. "WP2,Wakeup pin WKUP2 polarity" "0,1"
bitfld.long 0x00 0. "WP1,Wakeup pin WKUP1 polarity" "0,1"
rgroup.long 0x10++0x03
line.long 0x00 "SR1,Power status register 1"
bitfld.long 0x00 15. "WUFI,Internal wakeup interrupt flag" "0,1"
bitfld.long 0x00 11. "WRFBUSYF,Radio BUSY wakeup flag" "0,1"
newline
bitfld.long 0x00 8. "WPVDF,Wakeup PVD flag" "0,1"
bitfld.long 0x00 2. "WUF3,Wakeup flag 3" "0,1"
newline
bitfld.long 0x00 1. "WUF2,Wakeup flag 2" "0,1"
bitfld.long 0x00 0. "WUF1,Wakeup flag 1" "0,1"
rgroup.long 0x14++0x03
line.long 0x00 "SR2,Power status register 2"
bitfld.long 0x00 14. "PVMO3,Peripheral voltage monitoring output: VDDA vs" "0,1"
bitfld.long 0x00 11. "PVDO,Power voltage detector output" "0,1"
newline
bitfld.long 0x00 10. "VOSF,Voltage scaling flag" "0,1"
bitfld.long 0x00 9. "REGLPF,regulator1 low power flag" "0,1"
newline
bitfld.long 0x00 8. "REGLPS,regulator1 started" "0,1"
bitfld.long 0x00 7. "FLASHRDY,Flash ready" "0,1"
newline
bitfld.long 0x00 6. "REGMRS,regulator2 low power flag" "0,1"
bitfld.long 0x00 5. "RFEOLF,Radio end of life flag" "0,1"
newline
bitfld.long 0x00 4. "LDORDY,LDO ready flag" "0,1"
bitfld.long 0x00 3. "SMPSRDY,SMPS ready flag" "0,1"
newline
bitfld.long 0x00 2. "RFBUSYMS,Radio BUSY masked signal status" "0,1"
bitfld.long 0x00 1. "RFBUSYS,Radio BUSY signal status" "0,1"
wgroup.long 0x18++0x03
line.long 0x00 "SCR,Power status clear register"
bitfld.long 0x00 11. "CWRFBUSYF,Clear wakeup Radio BUSY flag" "0,1"
bitfld.long 0x00 8. "CWPVDF,Clear wakeup PVD interrupt flag" "0,1"
newline
bitfld.long 0x00 2. "CWUF3,Clear wakeup flag 3" "0,1"
bitfld.long 0x00 1. "CWUF2,Clear wakeup flag 2" "0,1"
newline
bitfld.long 0x00 0. "CWUF1,Clear wakeup flag 1" "0,1"
group.long 0x1C++0x03
line.long 0x00 "CR5,Power control register 5"
bitfld.long 0x00 15. "SMPSEN,Enable SMPS Step Down converter SMPS mode enabled" "0,1"
bitfld.long 0x00 14. "RFEOLEN,Enable Radio End Of Life detector enabled" "0,1"
group.long 0x20++0x03
line.long 0x00 "PUCRA,Power Port A pull-up control register"
bitfld.long 0x00 15. "PU15,Port PA15 pull-up" "0,1"
bitfld.long 0x00 14. "PU14,PU14" "0,1"
newline
bitfld.long 0x00 13. "PU13,Port PA[y] pull-up bit y (y=0 to 13)" "0,1"
bitfld.long 0x00 12. "PU12,PU12" "0,1"
newline
bitfld.long 0x00 11. "PU11,PU11" "0,1"
bitfld.long 0x00 10. "PU10,PU10" "0,1"
newline
bitfld.long 0x00 9. "PU9,PU9" "0,1"
bitfld.long 0x00 8. "PU8,PU8" "0,1"
newline
bitfld.long 0x00 7. "PU7,PU7" "0,1"
bitfld.long 0x00 6. "PU6,PU6" "0,1"
newline
bitfld.long 0x00 5. "PU5,PU5" "0,1"
bitfld.long 0x00 4. "PU4,PU4" "0,1"
newline
bitfld.long 0x00 3. "PU3,PU3" "0,1"
bitfld.long 0x00 2. "PU2,PU2" "0,1"
newline
bitfld.long 0x00 1. "PU1,PU1" "0,1"
bitfld.long 0x00 0. "PU0,PU0" "0,1"
group.long 0x24++0x03
line.long 0x00 "PDCRA,Power Port A pull-down control register"
bitfld.long 0x00 15. "PD15,PD15" "0,1"
bitfld.long 0x00 14. "PD14,ull-down" "0,1"
newline
bitfld.long 0x00 13. "PD13,PD13" "0,1"
bitfld.long 0x00 12. "PD12,Port PA[y] pull-down (y=0 to 12)" "0,1"
newline
bitfld.long 0x00 11. "PD11,PD11" "0,1"
bitfld.long 0x00 10. "PD10,PD10" "0,1"
newline
bitfld.long 0x00 9. "PD9,PD9" "0,1"
bitfld.long 0x00 8. "PD8,PD8" "0,1"
newline
bitfld.long 0x00 7. "PD7,PD7" "0,1"
bitfld.long 0x00 6. "PD6,PD6" "0,1"
newline
bitfld.long 0x00 5. "PD5,PD5" "0,1"
bitfld.long 0x00 4. "PD4,PD4" "0,1"
newline
bitfld.long 0x00 3. "PD3,PD3" "0,1"
bitfld.long 0x00 2. "PD2,PD2" "0,1"
newline
bitfld.long 0x00 1. "PD1,PD1" "0,1"
bitfld.long 0x00 0. "PD0,PD0" "0,1"
group.long 0x28++0x03
line.long 0x00 "PUCRB,Power Port B pull-up control register"
bitfld.long 0x00 15. "PU15,Port PB[y] pull-up (y=0 to 15)" "0,1"
bitfld.long 0x00 14. "PU14,PU14" "0,1"
newline
bitfld.long 0x00 13. "PU13,PU13" "0,1"
bitfld.long 0x00 12. "PU12,PU12" "0,1"
newline
bitfld.long 0x00 11. "PU11,PU11" "0,1"
bitfld.long 0x00 10. "PU10,PU10" "0,1"
newline
bitfld.long 0x00 9. "PU9,PU9" "0,1"
bitfld.long 0x00 8. "PU8,PU8" "0,1"
newline
bitfld.long 0x00 7. "PU7,PU7" "0,1"
bitfld.long 0x00 6. "PU6,PU6" "0,1"
newline
bitfld.long 0x00 5. "PU5,PU5" "0,1"
bitfld.long 0x00 4. "PU4,PU4" "0,1"
newline
bitfld.long 0x00 3. "PU3,PU3" "0,1"
bitfld.long 0x00 2. "PU2,PU2" "0,1"
newline
bitfld.long 0x00 1. "PU1,PU1" "0,1"
bitfld.long 0x00 0. "PU0,PU0" "0,1"
group.long 0x2C++0x03
line.long 0x00 "PDCRB,Power Port B pull-down control register"
bitfld.long 0x00 15. "PD15,Port PB[y] pull-down (y=5 to 15)" "0,1"
bitfld.long 0x00 14. "PD14,PD14" "0,1"
newline
bitfld.long 0x00 13. "PD13,PD13" "0,1"
bitfld.long 0x00 12. "PD12,PD12" "0,1"
newline
bitfld.long 0x00 11. "PD11,PD11" "0,1"
bitfld.long 0x00 10. "PD10,PD10" "0,1"
newline
bitfld.long 0x00 9. "PD9,PD9" "0,1"
bitfld.long 0x00 8. "PD8,PD8" "0,1"
newline
bitfld.long 0x00 7. "PD7,PD7" "0,1"
bitfld.long 0x00 6. "PD6,PD6" "0,1"
newline
bitfld.long 0x00 5. "PD5,PD5" "0,1"
bitfld.long 0x00 4. "PD4,PD4" "0,1"
newline
bitfld.long 0x00 3. "PD3,Port PB[y] pull-down (y=0 to 3)" "0,1"
bitfld.long 0x00 2. "PD2,PD2" "0,1"
newline
bitfld.long 0x00 1. "PD1,PD1" "0,1"
bitfld.long 0x00 0. "PD0,PD0" "0,1"
group.long 0x30++0x03
line.long 0x00 "PUCRC,Power Port C pull-up control register"
bitfld.long 0x00 15. "PU15,Port PC[y] pull-up (y=13 to 15)" "0,1"
bitfld.long 0x00 14. "PU14,PU14" "0,1"
newline
bitfld.long 0x00 13. "PU13,PU13" "0,1"
bitfld.long 0x00 6. "PU6,PU6" "0,1"
newline
bitfld.long 0x00 5. "PU5,PU5" "0,1"
bitfld.long 0x00 4. "PU4,PU4" "0,1"
newline
bitfld.long 0x00 3. "PU3,PU3" "0,1"
bitfld.long 0x00 2. "PU2,PU2" "0,1"
newline
bitfld.long 0x00 1. "PU1,PU1" "0,1"
bitfld.long 0x00 0. "PU0,PU0" "0,1"
group.long 0x34++0x03
line.long 0x00 "PDCRC,Power Port C pull-down control register"
bitfld.long 0x00 15. "PD15,Port PC[y] pull-down (y=13 to 15)" "0,1"
bitfld.long 0x00 14. "PD14,PD14" "0,1"
newline
bitfld.long 0x00 13. "PD13,PD13" "0,1"
bitfld.long 0x00 6. "PD6,PD6" "0,1"
newline
bitfld.long 0x00 5. "PD5,PD5" "0,1"
bitfld.long 0x00 4. "PD4,PD4" "0,1"
newline
bitfld.long 0x00 3. "PD3,PD3" "0,1"
bitfld.long 0x00 2. "PD2,PD2" "0,1"
newline
bitfld.long 0x00 1. "PD1,PD1" "0,1"
bitfld.long 0x00 0. "PD0,PD0" "0,1"
group.long 0x58++0x03
line.long 0x00 "PUCRH,Power Port H pull-up control register"
bitfld.long 0x00 3. "PU3,pull-up" "0,1"
group.long 0x5C++0x03
line.long 0x00 "PDCRH,Power Port H pull-down control register"
bitfld.long 0x00 3. "PD3,pull-down" "0,1"
group.long 0x88++0x03
line.long 0x00 "EXTSCR,Power extended status and status clear register"
rbitfld.long 0x00 14. "C1DS,CPU1 deepsleep mode" "0,1"
rbitfld.long 0x00 10. "C1STOPF,System Stop0 1 flag for CPU1" "0,1"
newline
rbitfld.long 0x00 9. "C1STOP2F,System Stop2 flag for CPU1" "0,1"
rbitfld.long 0x00 8. "C1SBF,System Standby flag for CPU1" "0,1"
newline
bitfld.long 0x00 0. "C1CSSF,Clear CPU1 Stop Standby flags" "0,1"
group.long 0x90++0x03
line.long 0x00 "SUBGHZSPICR,Power SPI3 control register"
bitfld.long 0x00 15. "NSS,sub-GHz SPI NSS control" "0,1"
tree.end
tree "RCC (Reset and clock control)"
base ad:0x58000000
group.long 0x00++0x03
line.long 0x00 "CR,Clock control register"
rbitfld.long 0x00 25. "PLLRDY,Main PLL clock ready flag" "0,1"
bitfld.long 0x00 24. "PLLON,Main PLL enable" "0,1"
newline
bitfld.long 0x00 21. "HSEBYPPWR,Enable HSE32 VDDTCXO output on package pin PB0-VDDTCXO" "0,1"
bitfld.long 0x00 20. "HSEPRE,HSE32 sysclk prescaler" "0,1"
newline
bitfld.long 0x00 19. "CSSON,HSE32 Clock security system enable" "0,1"
rbitfld.long 0x00 17. "HSERDY,HSE32 clock ready flag" "0,1"
newline
bitfld.long 0x00 16. "HSEON,HSE32 clock enable" "0,1"
rbitfld.long 0x00 12. "HSIKERDY,HSI16 kernel clock ready flag for peripherals requests" "0,1"
newline
bitfld.long 0x00 11. "HSIASFS,HSI16 automatic start from Stop" "0,1"
rbitfld.long 0x00 10. "HSIRDY,HSI16 clock ready flag" "0,1"
newline
bitfld.long 0x00 9. "HSIKERON,HSI16 always enable for peripheral kernel clocks" "0,1"
bitfld.long 0x00 8. "HSION,HSI16 clock enable" "0,1"
newline
bitfld.long 0x00 4.--7. "MSIRANGE,MSI clock ranges" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3. "MSIRGSEL,MSI range control selection" "0,1"
newline
bitfld.long 0x00 2. "MSIPLLEN,MSI clock PLL enable" "0,1"
rbitfld.long 0x00 1. "MSIRDY,MSI clock ready flag (After reset this bit will be read 1 once the MSI is ready)" "0,1"
newline
bitfld.long 0x00 0. "MSION,MSI clock enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "ICSCR,Internal clock sources calibration register"
hexmask.long.byte 0x00 24.--30. 1. "HSITRIM,HSI16 clock trimming"
hexmask.long.byte 0x00 16.--23. 1. "HSICAL,HSI16 clock calibration"
newline
hexmask.long.byte 0x00 8.--15. 1. "MSITRIM,MSI clock trimming"
hexmask.long.byte 0x00 0.--7. 1. "MSICAL,MSI clock calibration"
group.long 0x08++0x03
line.long 0x00 "CFGR,Clock configuration register"
bitfld.long 0x00 28.--30. "MCOPRE,Microcontroller clock output prescaler" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--27. "MCOSEL,Microcontroller clock output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 18. "PPRE2F,PCLK2 prescaler flag (APB2)" "0,1"
rbitfld.long 0x00 17. "PPRE1F,PCLK1 prescaler flag (APB1)" "0,1"
newline
rbitfld.long 0x00 16. "HPREF,HCLK1 prescaler flag (CPU1 AHB1 AHB2 and SRAM1)" "0,1"
bitfld.long 0x00 15. "STOPWUCK,Wakeup from Stop and CSS backup clock selection" "0,1"
newline
bitfld.long 0x00 11.--13. "PPRE2,PCLK2 high-speed prescaler (APB2)" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PPRE1,PCLK1 low-speed prescaler (APB1)" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--7. "HPRE,HCLK1 prescaler (CPU1 AHB1 AHB2 and SRAM1.)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 2.--3. "SWS,System clock switch status" "0,1,2,3"
newline
bitfld.long 0x00 0.--1. "SW,System clock switch" "0,1,2,3"
group.long 0x0C++0x03
line.long 0x00 "PLLCFGR,PLL configuration register"
bitfld.long 0x00 29.--31. "PLLR,Main PLL division factor for PLLRCLK" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 28. "PLLREN,Main PLL PLLRCLK output enable" "0,1"
newline
bitfld.long 0x00 25.--27. "PLLQ,Main PLL division factor for PLLQCLK" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24. "PLLQEN,Main PLL PLLQCLK output enable" "0,1"
newline
bitfld.long 0x00 17.--21. "PLLP,Main PLL division factor for PLLPCLK" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16. "PLLPEN,Main PLL PLLPCLK output enable" "0,1"
newline
hexmask.long.byte 0x00 8.--14. 1. "PLLN,Main PLL multiplication factor for VCO"
bitfld.long 0x00 4.--6. "PLLM,Division factor for the main PLL input clock" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--1. "PLLSRC,Main PLL entry clock source" "0,1,2,3"
group.long 0x18++0x03
line.long 0x00 "CIER,Clock interrupt enable register"
bitfld.long 0x00 9. "LSECSSIE,LSE clock security system interrupt enable" "0,1"
bitfld.long 0x00 5. "PLLRDYIE,PLL ready interrupt enable" "0,1"
newline
bitfld.long 0x00 4. "HSERDYIE,HSE32 ready interrupt enable" "0,1"
bitfld.long 0x00 3. "HSIRDYIE,HSI16 ready interrupt enable" "0,1"
newline
bitfld.long 0x00 2. "MSIRDYIE,MSI ready interrupt enable" "0,1"
bitfld.long 0x00 1. "LSERDYIE,LSE ready interrupt enable" "0,1"
newline
bitfld.long 0x00 0. "LSIRDYIE,LSI ready interrupt enable" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "CIFR,Clock interrupt flag register"
bitfld.long 0x00 9. "LSECSSF,LSE Clock security system interrupt flag" "0,1"
bitfld.long 0x00 8. "CSSF,HSE32 Clock security system interrupt flag" "0,1"
newline
bitfld.long 0x00 5. "PLLRDYF,PLL ready interrupt flag" "0,1"
bitfld.long 0x00 4. "HSERDYF,HSE32 ready interrupt flag" "0,1"
newline
bitfld.long 0x00 3. "HSIRDYF,HSI16 ready interrupt flag" "0,1"
bitfld.long 0x00 2. "MSIRDYF,MSI ready interrupt flag" "0,1"
newline
bitfld.long 0x00 1. "LSERDYF,LSE ready interrupt flag" "0,1"
bitfld.long 0x00 0. "LSIRDYF,LSI ready interrupt flag" "0,1"
wgroup.long 0x20++0x03
line.long 0x00 "CICR,Clock interrupt clear register"
bitfld.long 0x00 9. "LSECSSC,LSE Clock security system interrupt clear" "0,1"
bitfld.long 0x00 8. "CSSC,HSE32 Clock security system interrupt clear" "0,1"
newline
bitfld.long 0x00 5. "PLLRDYC,PLL ready interrupt clear" "0,1"
bitfld.long 0x00 4. "HSERDYC,HSE32 ready interrupt clear" "0,1"
newline
bitfld.long 0x00 3. "HSIRDYC,HSI16 ready interrupt clear" "0,1"
bitfld.long 0x00 2. "MSIRDYC,MSI ready interrupt clear" "0,1"
newline
bitfld.long 0x00 1. "LSERDYC,LSE ready interrupt clear" "0,1"
bitfld.long 0x00 0. "LSIRDYC,LSI ready interrupt clear" "0,1"
group.long 0x28++0x03
line.long 0x00 "AHB1RSTR,AHB1 peripheral reset register"
bitfld.long 0x00 12. "CRCRST,CRC reset" "0,1"
bitfld.long 0x00 2. "DMAMUX1RST,DMAMUX1 reset" "0,1"
newline
bitfld.long 0x00 1. "DMA2RST,DMA2 reset" "0,1"
bitfld.long 0x00 0. "DMA1RST,DMA1 reset" "0,1"
group.long 0x2C++0x03
line.long 0x00 "AHB2RSTR,AHB2 peripheral reset register"
bitfld.long 0x00 7. "GPIOHRST,IO port H reset" "0,1"
bitfld.long 0x00 2. "GPIOCRST,IO port C reset" "0,1"
newline
bitfld.long 0x00 1. "GPIOBRST,IO port B reset" "0,1"
bitfld.long 0x00 0. "GPIOARST,IO port A reset" "0,1"
group.long 0x30++0x03
line.long 0x00 "AHB3RSTR,AHB3 peripheral reset register"
bitfld.long 0x00 25. "FLASHRST,Flash interface reset" "0,1"
bitfld.long 0x00 19. "HSEMRST,HSEMRST" "0,1"
newline
bitfld.long 0x00 18. "RNGRST,RNGRST" "0,1"
bitfld.long 0x00 17. "AESRST,AESRST" "0,1"
newline
bitfld.long 0x00 16. "PKARST,PKARST" "0,1"
group.long 0x38++0x03
line.long 0x00 "APB1RSTR1,APB1 peripheral reset register 1"
bitfld.long 0x00 31. "LPTIM1RST,Low Power Timer 1 reset" "0,1"
bitfld.long 0x00 29. "DACRST,DAC reset" "0,1"
newline
bitfld.long 0x00 23. "I2C3RST,I2C3 reset" "0,1"
bitfld.long 0x00 22. "I2C2RST,I2C2 reset" "0,1"
newline
bitfld.long 0x00 21. "I2C1RST,I2C1 reset" "0,1"
bitfld.long 0x00 17. "USART2RST,USART2 reset" "0,1"
newline
bitfld.long 0x00 14. "SPI2S2RST,SPI2S2 reset" "0,1"
bitfld.long 0x00 0. "TIM2RST,TIM2 timer reset" "0,1"
group.long 0x3C++0x03
line.long 0x00 "APB1RSTR2,APB1 peripheral reset register 2"
bitfld.long 0x00 6. "LPTIM3RST,Low-power timer 3 reset" "0,1"
bitfld.long 0x00 5. "LPTIM2RST,Low-power timer 2 reset" "0,1"
newline
bitfld.long 0x00 0. "LPUART1RST,Low-power UART 1 reset" "0,1"
group.long 0x40++0x03
line.long 0x00 "APB2RSTR,APB2 peripheral reset register"
bitfld.long 0x00 18. "TIM17RST,TIM17 timer reset" "0,1"
bitfld.long 0x00 17. "TIM16RST,TIM16 timer reset" "0,1"
newline
bitfld.long 0x00 14. "USART1RST,USART1 reset" "0,1"
bitfld.long 0x00 12. "SPI1RST,SPI1 reset" "0,1"
newline
bitfld.long 0x00 11. "TIM1RST,TIM1 timer reset" "0,1"
bitfld.long 0x00 9. "ADCRST,ADC reset" "0,1"
group.long 0x44++0x03
line.long 0x00 "APB3RSTR,APB3 peripheral reset register"
bitfld.long 0x00 0. "SUBGHZSPIRST,Sub-GHz radio SPI reset" "0,1"
group.long 0x48++0x03
line.long 0x00 "AHB1ENR,AHB1 peripheral clock enable register"
bitfld.long 0x00 12. "CRCEN,CPU1 CRC clock enable" "0,1"
bitfld.long 0x00 2. "DMAMUX1EN,CPU1 DMAMUX1 clock enable" "0,1"
newline
bitfld.long 0x00 1. "DMA2EN,CPU1 DMA2 clock enable" "0,1"
bitfld.long 0x00 0. "DMA1EN,CPU1 DMA1 clock enable" "0,1"
group.long 0x4C++0x03
line.long 0x00 "AHB2ENR,AHB2 peripheral clock enable register"
bitfld.long 0x00 7. "GPIOHEN,CPU1 IO port H clock enable" "0,1"
bitfld.long 0x00 2. "GPIOCEN,CPU1 IO port C clock enable" "0,1"
newline
bitfld.long 0x00 1. "GPIOBEN,CPU1 IO port B clock enable" "0,1"
bitfld.long 0x00 0. "GPIOAEN,CPU1 IO port A clock enable" "0,1"
group.long 0x50++0x03
line.long 0x00 "AHB3ENR,AHB3 peripheral clock enable register"
bitfld.long 0x00 25. "FLASHEN,CPU1 Flash interface clock enable" "0,1"
bitfld.long 0x00 19. "HSEMEN,HSEMEN" "0,1"
newline
bitfld.long 0x00 18. "RNGEN,RNGEN" "0,1"
bitfld.long 0x00 17. "AESEN,AESEN" "0,1"
newline
bitfld.long 0x00 16. "PKAEN,PKAEN" "0,1"
group.long 0x58++0x03
line.long 0x00 "APB1ENR1,APB1 peripheral clock enable register 1"
bitfld.long 0x00 31. "LPTIM1EN,CPU1 Low power timer 1 clocks enable" "0,1"
bitfld.long 0x00 29. "DAC1EN,CPU1 DAC1 clock enable" "0,1"
newline
bitfld.long 0x00 23. "I2C3EN,CPU1 I2C3 clocks enable" "0,1"
bitfld.long 0x00 22. "I2C2EN,CPU1 I2C2 clocks enable" "0,1"
newline
bitfld.long 0x00 21. "I2C1EN,CPU1 I2C1 clocks enable" "0,1"
bitfld.long 0x00 17. "USART2EN,CPU1 USART2 clock enable" "0,1"
newline
bitfld.long 0x00 14. "SPI2S2EN,CPU1 SPI2S2 clock enable" "0,1"
bitfld.long 0x00 11. "WWDGEN,CPU1 Window watchdog clock enable" "0,1"
newline
bitfld.long 0x00 10. "RTCAPBEN,CPU1 RTC APB clock enable" "0,1"
bitfld.long 0x00 0. "TIM2EN,CPU1 TIM2 timer clock enable" "0,1"
group.long 0x5C++0x03
line.long 0x00 "APB1ENR2,APB1 peripheral clock enable register 2"
bitfld.long 0x00 6. "LPTIM3EN,CPU1 Low power timer 3 clocks enable" "0,1"
bitfld.long 0x00 5. "LPTIM2EN,CPU1 Low power timer 2 clocks enable" "0,1"
newline
bitfld.long 0x00 0. "LPUART1EN,CPU1 Low power UART 1 clocks enable" "0,1"
group.long 0x60++0x03
line.long 0x00 "APB2ENR,APB2 peripheral clock enable register"
bitfld.long 0x00 18. "TIM17EN,CPU1 TIM17 timer clock enable" "0,1"
bitfld.long 0x00 17. "TIM16EN,CPU1 TIM16 timer clock enable" "0,1"
newline
bitfld.long 0x00 14. "USART1EN,CPU1 USART1clocks enable" "0,1"
bitfld.long 0x00 12. "SPI1EN,CPU1 SPI1 clock enable" "0,1"
newline
bitfld.long 0x00 11. "TIM1EN,CPU1 TIM1 timer clock enable" "0,1"
bitfld.long 0x00 9. "ADCEN,CPU1 ADC clocks enable" "0,1"
group.long 0x64++0x03
line.long 0x00 "APB3ENR,APB3 peripheral clock enable register"
bitfld.long 0x00 0. "SUBGHZSPIEN,sub-GHz radio SPI clock enable" "0,1"
group.long 0x68++0x03
line.long 0x00 "AHB1SMENR,AHB1 peripheral clocks enable in Sleep modes register"
bitfld.long 0x00 12. "CRCSMEN,CRC clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 2. "DMAMUX1SMEN,DMAMUX1 clock enable during CPU1 CSleep mode" "0,1"
newline
bitfld.long 0x00 1. "DMA2SMEN,DMA2 clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 0. "DMA1SMEN,DMA1 clock enable during CPU1 CSleep mode" "0,1"
group.long 0x6C++0x03
line.long 0x00 "AHB2SMENR,AHB2 peripheral clocks enable in Sleep modes register"
bitfld.long 0x00 7. "GPIOHSMEN,IO port H clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 2. "GPIOCSMEN,IO port C clock enable during CPU1 CSleep mode" "0,1"
newline
bitfld.long 0x00 1. "GPIOBSMEN,IO port B clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 0. "GPIOASMEN,IO port A clock enable during CPU1 CSleep mode" "0,1"
group.long 0x70++0x03
line.long 0x00 "AHB3SMENR,AHB3 peripheral clocks enable in Sleep and Stop modes register"
bitfld.long 0x00 25. "FLASHSMEN,Flash interface clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 24. "SRAM2SMEN,SRAM2 memory interface clock enable during CPU1 CSleep mode" "0,1"
newline
bitfld.long 0x00 23. "SRAM1SMEN,SRAM1 interface clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 18. "RNGSMEN,True RNG clocks enable during CPU1 Csleep and CStop modes" "0,1"
newline
bitfld.long 0x00 17. "AESSMEN,AES accelerator clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 16. "PKASMEN,PKA accelerator clock enable during CPU1 CSleep mode" "0,1"
group.long 0x78++0x03
line.long 0x00 "APB1SMENR1,APB1 peripheral clocks enable in Sleep mode register 1"
bitfld.long 0x00 31. "LPTIM1SMEN,Low power timer 1 clock enable during CPU1 Csleep and CStop mode" "0,1"
bitfld.long 0x00 29. "DACSMEN,DAC clock enable during CPU1 CSleep mode" "0,1"
newline
bitfld.long 0x00 23. "I2C3SMEN,I2C3 clock enable during CPU1 Csleep and CStop modes" "0,1"
bitfld.long 0x00 22. "I2C2SMEN,I2C2 clock enable during CPU1 Csleep and CStop modes" "0,1"
newline
bitfld.long 0x00 21. "I2C1SMEN,I2C1 clock enable during CPU1 Csleep and CStop modes" "0,1"
bitfld.long 0x00 17. "USART2SMEN,USART2 clock enable during CPU1 CSleep mode" "0,1"
newline
bitfld.long 0x00 14. "SPI2S2SMEN,SPI2S2 clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 11. "WWDGSMEN,Window watchdog clocks enable during CPU1 CSleep mode" "0,1"
newline
bitfld.long 0x00 10. "RTCAPBSMEN,RTC bus clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 0. "TIM2SMEN,TIM2 timer clock enable during CPU1 CSleep mode" "0,1"
group.long 0x7C++0x03
line.long 0x00 "APB1SMENR2,APB1 peripheral clocks enable in Sleep mode register 2"
bitfld.long 0x00 6. "LPTIM3SMEN,Low power timer 3 clock enable during CPU1 Csleep and CStop modes" "0,1"
bitfld.long 0x00 5. "LPTIM2SMEN,Low power timer 2 clock enable during CPU1 Csleep and CStop modes" "0,1"
newline
bitfld.long 0x00 0. "LPUART1SMEN,Low power UART 1 clock enable during CPU1 Csleep and CStop modes" "0,1"
group.long 0x80++0x03
line.long 0x00 "APB2SMENR,APB2 peripheral clocks enable in Sleep mode register"
bitfld.long 0x00 18. "TIM17SMEN,TIM17 timer clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 17. "TIM16SMEN,TIM16 timer clock enable during CPU1 CSleep mode" "0,1"
newline
bitfld.long 0x00 14. "USART1SMEN,USART1 clock enable during CPU1 Csleep and CStop modes" "0,1"
bitfld.long 0x00 12. "SPI1SMEN,SPI1 clock enable during CPU1 CSleep mode" "0,1"
newline
bitfld.long 0x00 11. "TIM1SMEN,TIM1 timer clock enable during CPU1 CSleep mode" "0,1"
bitfld.long 0x00 9. "ADCSMEN,ADC clocks enable during CPU1 Csleep and CStop modes" "0,1"
group.long 0x84++0x03
line.long 0x00 "APB3SMENR,APB3 peripheral clock enable in Sleep mode register"
bitfld.long 0x00 0. "SUBGHZSPISMEN,Sub-GHz radio SPI clock enable during Sleep and Stop modes" "0,1"
group.long 0x88++0x03
line.long 0x00 "CCIPR,Peripherals independent clock configuration register"
bitfld.long 0x00 30.--31. "RNGSEL,RNG clock source selection" "0,1,2,3"
bitfld.long 0x00 28.--29. "ADCSEL,ADC clock source selection" "0,1,2,3"
newline
bitfld.long 0x00 22.--23. "LPTIM3SEL,Low power timer 3 clock source selection" "0,1,2,3"
bitfld.long 0x00 20.--21. "LPTIM2SEL,Low power timer 2 clock source selection" "0,1,2,3"
newline
bitfld.long 0x00 18.--19. "LPTIM1SEL,Low power timer 1 clock source selection" "0,1,2,3"
bitfld.long 0x00 16.--17. "I2C3SEL,I2C3 clock source selection" "0,1,2,3"
newline
bitfld.long 0x00 14.--15. "I2C2SEL,I2C2 clock source selection" "0,1,2,3"
bitfld.long 0x00 12.--13. "I2C1SEL,I2C1 clock source selection" "0,1,2,3"
newline
bitfld.long 0x00 10.--11. "LPUART1SEL,LPUART1 clock source selection" "0,1,2,3"
bitfld.long 0x00 8.--9. "SPI2S2SEL,SPI2S2 I2S clock source selection" "0,1,2,3"
newline
bitfld.long 0x00 2.--3. "USART2SEL,USART2 clock source selection" "0,1,2,3"
bitfld.long 0x00 0.--1. "USART1SEL,USART1 clock source selection" "0,1,2,3"
group.long 0x90++0x03
line.long 0x00 "BDCR,Backup domain control register"
bitfld.long 0x00 25. "LSCOSEL,Low speed clock output selection" "0,1"
bitfld.long 0x00 24. "LSCOEN,Low speed clock output enable" "0,1"
newline
bitfld.long 0x00 16. "BDRST,Backup domain software reset" "0,1"
bitfld.long 0x00 15. "RTCEN,RTC clock enable" "0,1"
newline
rbitfld.long 0x00 11. "LSESYSRDY,LSE system clock ready" "0,1"
bitfld.long 0x00 8.--9. "RTCSEL,RTC clock source selection" "0,1,2,3"
newline
bitfld.long 0x00 7. "LSESYSEN,LSE system clock enable" "0,1"
rbitfld.long 0x00 6. "LSECSSD,CSS on LSE failure Detection" "0,1"
newline
bitfld.long 0x00 5. "LSECSSON,CSS on LSE enable" "0,1"
bitfld.long 0x00 3.--4. "LSEDRV,LSE oscillator drive capability" "0,1,2,3"
newline
bitfld.long 0x00 2. "LSEBYP,LSE oscillator bypass" "0,1"
rbitfld.long 0x00 1. "LSERDY,LSE oscillator ready" "0,1"
newline
bitfld.long 0x00 0. "LSEON,LSE oscillator enable" "0,1"
group.long 0x94++0x03
line.long 0x00 "CSR,Control/status register"
rbitfld.long 0x00 31. "LPWRRSTF,Low-power reset flag" "0,1"
rbitfld.long 0x00 30. "WWDGRSTF,Window watchdog reset flag" "0,1"
newline
rbitfld.long 0x00 29. "IWDGRSTF,Independent window watchdog reset flag" "0,1"
rbitfld.long 0x00 28. "SFTRSTF,Software reset flag" "0,1"
newline
rbitfld.long 0x00 27. "BORRSTF,BOR flag" "0,1"
rbitfld.long 0x00 26. "PINRSTF,Pin reset flag" "0,1"
newline
rbitfld.long 0x00 25. "OBLRSTF,Option byte loader reset flag" "0,1"
rbitfld.long 0x00 24. "RFILARSTF,Radio illegal access flag" "0,1"
newline
bitfld.long 0x00 23. "RMVF,Remove reset flag" "0,1"
bitfld.long 0x00 15. "RFRST,Radio reset" "0,1"
newline
rbitfld.long 0x00 14. "RFRSTF,Radio in reset status flag" "0,1"
bitfld.long 0x00 8.--11. "MSISRANGE,MSI clock ranges" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4. "LSIPRE,LSI frequency prescaler" "0,1"
rbitfld.long 0x00 1. "LSIRDY,LSI oscillator ready" "0,1"
newline
bitfld.long 0x00 0. "LSION,LSI oscillator enable" "0,1"
group.long 0x108++0x03
line.long 0x00 "EXTCFGR,Extended clock recovery register"
rbitfld.long 0x00 16. "SHDHPREF,HCLK3 shared prescaler flag (AHB3 Flash and SRAM2)" "0,1"
bitfld.long 0x00 0.--3. "SHDHPRE,HCLK3 shared prescaler (AHB3 Flash and SRAM2)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "RNG (Random Number Generator)"
base ad:0x58001000
group.long 0x00++0x03
line.long 0x00 "CR,control register"
bitfld.long 0x00 31. "CONFIGLOCK,CONFIGLOCK" "0,1"
bitfld.long 0x00 30. "CONDRST,Conditioning soft reset" "0,1"
newline
bitfld.long 0x00 20.--25. "RNG_CONFIG1,RNG_CONFIG1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--19. "CLKDIV,CLKDIV" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 13.--15. "RNG_CONFIG2,RNG_CONFIG2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12. "NISTC,NISTC" "0,1"
newline
bitfld.long 0x00 8.--11. "RNG_CONFIG3,RNG_CONFIG3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5. "CED,Interrupt Enable" "0,1"
newline
bitfld.long 0x00 3. "IE,Interrupt Enable" "0,1"
bitfld.long 0x00 2. "RNGEN,True random number generator enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "SR,status register"
bitfld.long 0x00 6. "SEIS,Seed error interrupt status" "0,1"
bitfld.long 0x00 5. "CEIS,Clock error interrupt status" "0,1"
newline
rbitfld.long 0x00 2. "SECS,Seed error current status" "0,1"
rbitfld.long 0x00 1. "CECS,Clock error current status" "0,1"
newline
rbitfld.long 0x00 0. "DRDY,Data Ready" "0,1"
rgroup.long 0x08++0x03
line.long 0x00 "DR,data register"
hexmask.long 0x00 0.--31. 1. "RNDATA,Random data"
group.long 0x10++0x03
line.long 0x00 "HTCR,health test control register"
hexmask.long 0x00 0.--31. 1. "HTCFG,health test configuration"
tree.end
tree "RTC (Real-time Counter)"
base ad:0x40002800
group.long 0x00++0x03
line.long 0x00 "TR,TR"
bitfld.long 0x00 22. "PM,AM/PM notation" "0,1"
bitfld.long 0x00 20.--21. "HT,Hour tens in BCD format" "0,1,2,3"
newline
bitfld.long 0x00 16.--19. "HU,Hour units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--14. "MNT,Minute tens in BCD format" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--11. "MNU,Minute units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--6. "ST,Second tens in BCD format" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--3. "SU,Second units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x04++0x03
line.long 0x00 "DR,DR"
bitfld.long 0x00 20.--23. "YT,Year tens in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "YU,Year units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 13.--15. "WDU,Week day units" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12. "MT,Month tens in BCD format" "0,1"
newline
bitfld.long 0x00 8.--11. "MU,Month units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--5. "DT,Date tens in BCD format" "0,1,2,3"
newline
bitfld.long 0x00 0.--3. "DU,Date units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x08++0x03
line.long 0x00 "SSR,SSR"
hexmask.long 0x00 0.--31. 1. "SS,Synchronous binary counter"
group.long 0x0C++0x03
line.long 0x00 "ICSR,ICSR"
rbitfld.long 0x00 16. "RECALPF,Recalibration pending Flag" "0,1"
bitfld.long 0x00 10.--12. "BCDU,BCD update" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--9. "BIN,Binary mode" "0,1,2,3"
bitfld.long 0x00 7. "INIT,Initialization mode" "0,1"
newline
rbitfld.long 0x00 6. "INITF,Initialization flag" "0,1"
bitfld.long 0x00 5. "RSF,Registers synchronization flag" "0,1"
newline
rbitfld.long 0x00 4. "INITS,Initialization status flag" "0,1"
rbitfld.long 0x00 3. "SHPF,Shift operation pending" "0,1"
newline
rbitfld.long 0x00 2. "WUTWF,Wakeup timer write flag" "0,1"
group.long 0x10++0x03
line.long 0x00 "PRER,PRER"
hexmask.long.byte 0x00 16.--22. 1. "PREDIV_A,Asynchronous prescaler factor"
hexmask.long.word 0x00 0.--14. 1. "PREDIV_S,Synchronous prescaler factor"
group.long 0x14++0x03
line.long 0x00 "WUTR,WUTR"
hexmask.long.word 0x00 16.--31. 1. "WUTOCLR,Wakeup auto-reload output clear value"
hexmask.long.word 0x00 0.--15. 1. "WUT,Wakeup auto-reload value bits"
group.long 0x18++0x03
line.long 0x00 "CR,CR"
bitfld.long 0x00 31. "OUT2EN,RTC_OUT2 output enable" "0,1"
bitfld.long 0x00 30. "TAMPALRM_TYPE,TAMPALRM output type" "0,1"
newline
bitfld.long 0x00 29. "TAMPALRM_PU,TAMPALRM pull-up enable" "0,1"
bitfld.long 0x00 26. "TAMPOE,Tamper detection output enable on TAMPALRM" "0,1"
newline
bitfld.long 0x00 25. "TAMPTS,Activate timestamp on tamper detection event" "0,1"
bitfld.long 0x00 24. "ITSE,timestamp on internal event enable" "0,1"
newline
bitfld.long 0x00 23. "COE,Calibration output enable" "0,1"
bitfld.long 0x00 21.--22. "OSEL,Output selection" "0,1,2,3"
newline
bitfld.long 0x00 20. "POL,Output polarity" "0,1"
bitfld.long 0x00 19. "COSEL,Calibration output selection" "0,1"
newline
bitfld.long 0x00 18. "BKP,Backup" "0,1"
bitfld.long 0x00 17. "SUB1H,Subtract 1 hour (winter time change)" "0,1"
newline
bitfld.long 0x00 16. "ADD1H,Add 1 hour (summer time change)" "0,1"
bitfld.long 0x00 15. "TSIE,Timestamp interrupt enable" "0,1"
newline
bitfld.long 0x00 14. "WUTIE,Wakeup timer interrupt enable" "0,1"
bitfld.long 0x00 13. "ALRBIE,Alarm B interrupt enable" "0,1"
newline
bitfld.long 0x00 12. "ALRAIE,Alarm A interrupt enable" "0,1"
bitfld.long 0x00 11. "TSE,timestamp enable" "0,1"
newline
bitfld.long 0x00 10. "WUTE,Wakeup timer enable" "0,1"
bitfld.long 0x00 9. "ALRBE,Alarm B enable" "0,1"
newline
bitfld.long 0x00 8. "ALRAE,Alarm A enable" "0,1"
bitfld.long 0x00 7. "SSRUIE,SSR underflow interrupt enable" "0,1"
newline
bitfld.long 0x00 6. "FMT,Hour format" "0,1"
bitfld.long 0x00 5. "BYPSHAD,Bypass the shadow registers" "0,1"
newline
bitfld.long 0x00 4. "REFCKON,RTC_REFIN reference clock detection enable (50 or 60 Hz)" "0,1"
bitfld.long 0x00 3. "TSEDGE,Timestamp event active edge" "0,1"
newline
bitfld.long 0x00 0.--2. "WUCKSEL,Wakeup clock selection" "0,1,2,3,4,5,6,7"
wgroup.long 0x24++0x03
line.long 0x00 "WPR,write protection register"
hexmask.long.byte 0x00 0.--7. 1. "KEY,Write protection key"
group.long 0x28++0x03
line.long 0x00 "CALR,CALR"
bitfld.long 0x00 15. "CALP,Use an 8-second calibration cycle period" "0,1"
bitfld.long 0x00 14. "CALW8,Use a 16-second calibration cycle period" "0,1"
newline
bitfld.long 0x00 13. "CALW16,CALW16" "0,1"
bitfld.long 0x00 12. "LPCAL,Calibration low-power mode" "0,1"
newline
hexmask.long.word 0x00 0.--8. 1. "CALM,Calibration minus"
wgroup.long 0x2C++0x03
line.long 0x00 "SHIFTR,SHIFTR"
bitfld.long 0x00 31. "ADD1S,Add one second" "0,1"
hexmask.long.word 0x00 0.--14. 1. "SUBFS,Subtract a fraction of a second"
rgroup.long 0x30++0x03
line.long 0x00 "TSTR,TSTR"
bitfld.long 0x00 22. "PM,AM/PM notation" "0,1"
bitfld.long 0x00 20.--21. "HT,Hour tens in BCD format" "0,1,2,3"
newline
bitfld.long 0x00 16.--19. "HU,Hour units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--14. "MNT,Minute tens in BCD format" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--11. "MNU,Minute units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--6. "ST,Second tens in BCD format" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--3. "SU,Second units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x34++0x03
line.long 0x00 "TSDR,TSDR"
bitfld.long 0x00 13.--15. "WDU,Week day units" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12. "MT,Month tens in BCD format" "0,1"
newline
bitfld.long 0x00 8.--11. "MU,Month units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--5. "DT,Date tens in BCD format" "0,1,2,3"
newline
bitfld.long 0x00 0.--3. "DU,Date units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x38++0x03
line.long 0x00 "TSSSR,TSSSR"
hexmask.long 0x00 0.--31. 1. "SS,Sub second value"
group.long 0x40++0x03
line.long 0x00 "ALRMAR,ALRMAR"
bitfld.long 0x00 31. "MSK4,Alarm A date mask" "0,1"
bitfld.long 0x00 30. "WDSEL,Week day selection" "0,1"
newline
bitfld.long 0x00 28.--29. "DT,Date tens in BCD format" "0,1,2,3"
bitfld.long 0x00 24.--27. "DU,Date units or day in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "MSK3,Alarm A hours mask" "0,1"
bitfld.long 0x00 22. "PM,AM/PM notation" "0,1"
newline
bitfld.long 0x00 20.--21. "HT,Hour tens in BCD format" "0,1,2,3"
bitfld.long 0x00 16.--19. "HU,Hour units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "MSK2,Alarm A minutes mask" "0,1"
bitfld.long 0x00 12.--14. "MNT,Minute tens in BCD format" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--11. "MNU,Minute units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "MSK1,Alarm A seconds mask" "0,1"
newline
bitfld.long 0x00 4.--6. "ST,Second tens in BCD format" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--3. "SU,Second units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x44++0x03
line.long 0x00 "ALRMASSR,ALRMASSR"
bitfld.long 0x00 31. "SSCLR,Clear synchronous counter on alarm (Binary mode only)" "0,1"
bitfld.long 0x00 24.--29. "MASKSS,Mask the most-significant bits starting at this bit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--14. 1. "SS,Sub seconds value"
group.long 0x48++0x03
line.long 0x00 "ALRMBR,ALRMBR"
bitfld.long 0x00 31. "MSK4,Alarm B date mask" "0,1"
bitfld.long 0x00 30. "WDSEL,Week day selection" "0,1"
newline
bitfld.long 0x00 28.--29. "DT,Date tens in BCD format" "0,1,2,3"
bitfld.long 0x00 24.--27. "DU,Date units or day in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "MSK3,Alarm B hours mask" "0,1"
bitfld.long 0x00 22. "PM,AM/PM notation" "0,1"
newline
bitfld.long 0x00 20.--21. "HT,Hour tens in BCD format" "0,1,2,3"
bitfld.long 0x00 16.--19. "HU,Hour units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "MSK2,Alarm B minutes mask" "0,1"
bitfld.long 0x00 12.--14. "MNT,Minute tens in BCD format" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--11. "MNU,Minute units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 7. "MSK1,Alarm B seconds mask" "0,1"
newline
bitfld.long 0x00 4.--6. "ST,Second tens in BCD format" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--3. "SU,Second units in BCD format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x4C++0x03
line.long 0x00 "ALRMBSSR,ALRMBSSR"
bitfld.long 0x00 31. "SSCLR,Clear synchronous counter on alarm (Binary mode only)" "0,1"
bitfld.long 0x00 24.--29. "MASKSS,Mask the most-significant bits starting at this bit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--14. 1. "SS,Sub seconds value"
rgroup.long 0x50++0x03
line.long 0x00 "SR,SR"
bitfld.long 0x00 6. "SSRUF,SSR underflow flag" "0,1"
bitfld.long 0x00 5. "ITSF,Internal timestamp flag" "0,1"
newline
bitfld.long 0x00 4. "TSOVF,Timestamp overflow flag" "0,1"
bitfld.long 0x00 3. "TSF,Timestamp flag" "0,1"
newline
bitfld.long 0x00 2. "WUTF,Wakeup timer flag" "0,1"
bitfld.long 0x00 1. "ALRBF,Alarm B flag" "0,1"
newline
bitfld.long 0x00 0. "ALRAF,Alarm A flag" "0,1"
rgroup.long 0x54++0x03
line.long 0x00 "MISR,MISR"
bitfld.long 0x00 6. "SSRUMF,SSR underflow masked flag" "0,1"
bitfld.long 0x00 5. "ITSMF,Internal timestamp masked flag" "0,1"
newline
bitfld.long 0x00 4. "TSOVMF,Timestamp overflow masked flag" "0,1"
bitfld.long 0x00 3. "TSMF,Timestamp masked flag" "0,1"
newline
bitfld.long 0x00 2. "WUTMF,Wakeup timer masked flag" "0,1"
bitfld.long 0x00 1. "ALRBMF,Alarm B masked flag" "0,1"
newline
bitfld.long 0x00 0. "ALRAMF,Alarm A masked flag" "0,1"
wgroup.long 0x5C++0x03
line.long 0x00 "SCR,SCR"
bitfld.long 0x00 6. "CSSRUF,Clear SSR underflow flag" "0,1"
bitfld.long 0x00 5. "CITSF,Clear internal timestamp flag" "0,1"
newline
bitfld.long 0x00 4. "CTSOVF,Clear timestamp overflow flag" "0,1"
bitfld.long 0x00 3. "CTSF,Clear timestamp flag" "0,1"
newline
bitfld.long 0x00 2. "CWUTF,Clear wakeup timer flag" "0,1"
bitfld.long 0x00 1. "CALRBF,Clear alarm B flag" "0,1"
newline
bitfld.long 0x00 0. "CALRAF,Clear alarm A flag" "0,1"
group.long 0x70++0x03
line.long 0x00 "ALRABINR,RTC alarm A binary mode register"
hexmask.long 0x00 0.--31. 1. "SS,Synchronous counter alarm value in Binary mode"
group.long 0x74++0x03
line.long 0x00 "ALRBBINR,RTC alarm B binary mode register"
hexmask.long 0x00 0.--31. 1. "SS,Synchronous counter alarm value in Binary mode"
tree.end
tree "SCB (System control block)"
tree "SCB"
base ad:0xE000ED00
rgroup.long 0x00++0x03
line.long 0x00 "CPUID,CPUID base register"
hexmask.long.byte 0x00 24.--31. 1. "Implementer,Implementer code"
bitfld.long 0x00 20.--23. "Variant,Variant number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. "Constant,Reads as 0xF" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 4.--15. 1. "PartNo,Part number of the processor"
newline
bitfld.long 0x00 0.--3. "Revision,Revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x04++0x03
line.long 0x00 "ICSR,Interrupt control and state register"
bitfld.long 0x00 31. "NMIPENDSET,NMI set-pending bit" "0,1"
bitfld.long 0x00 28. "PENDSVSET,PendSV set-pending bit" "0,1"
newline
bitfld.long 0x00 27. "PENDSVCLR,PendSV clear-pending bit" "0,1"
bitfld.long 0x00 26. "PENDSTSET,SysTick exception set-pending bit" "0,1"
newline
bitfld.long 0x00 25. "PENDSTCLR,SysTick exception clear-pending bit" "0,1"
bitfld.long 0x00 22. "ISRPENDING,Interrupt pending flag" "0,1"
newline
hexmask.long.byte 0x00 12.--18. 1. "VECTPENDING,Pending vector"
bitfld.long 0x00 11. "RETTOBASE,Return to base level" "0,1"
newline
hexmask.long.word 0x00 0.--8. 1. "VECTACTIVE,Active vector"
group.long 0x08++0x03
line.long 0x00 "VTOR,Vector table offset register"
hexmask.long.tbyte 0x00 9.--29. 1. "TBLOFF,Vector table base offset field"
group.long 0x0C++0x03
line.long 0x00 "AIRCR,Application interrupt and reset control register"
hexmask.long.word 0x00 16.--31. 1. "VECTKEYSTAT,Register key"
bitfld.long 0x00 15. "ENDIANESS,ENDIANESS" "0,1"
newline
bitfld.long 0x00 8.--10. "PRIGROUP,PRIGROUP" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2. "SYSRESETREQ,SYSRESETREQ" "0,1"
newline
bitfld.long 0x00 1. "VECTCLRACTIVE,VECTCLRACTIVE" "0,1"
bitfld.long 0x00 0. "VECTRESET,VECTRESET" "0,1"
group.long 0x10++0x03
line.long 0x00 "SCR,System control register"
bitfld.long 0x00 4. "SEVEONPEND,Send Event on Pending bit" "0,1"
bitfld.long 0x00 2. "SLEEPDEEP,SLEEPDEEP" "0,1"
newline
bitfld.long 0x00 1. "SLEEPONEXIT,SLEEPONEXIT" "0,1"
group.long 0x14++0x03
line.long 0x00 "CCR,Configuration and control register"
bitfld.long 0x00 9. "STKALIGN,STKALIGN" "0,1"
bitfld.long 0x00 8. "BFHFNMIGN,BFHFNMIGN" "0,1"
newline
bitfld.long 0x00 4. "DIV_0_TRP,DIV_0_TRP" "0,1"
bitfld.long 0x00 3. "UNALIGN__TRP,UNALIGN_ TRP" "0,1"
newline
bitfld.long 0x00 1. "USERSETMPEND,USERSETMPEND" "0,1"
bitfld.long 0x00 0. "NONBASETHRDENA,Configures how the processor enters Thread mode" "0,1"
group.long 0x18++0x03
line.long 0x00 "SHPR1,System handler priority registers"
hexmask.long.byte 0x00 16.--23. 1. "PRI_6,Priority of system handler 6"
hexmask.long.byte 0x00 8.--15. 1. "PRI_5,Priority of system handler 5"
newline
hexmask.long.byte 0x00 0.--7. 1. "PRI_4,Priority of system handler 4"
group.long 0x1C++0x03
line.long 0x00 "SHPR2,System handler priority registers"
hexmask.long.byte 0x00 24.--31. 1. "PRI_11,Priority of system handler 11"
group.long 0x20++0x03
line.long 0x00 "SHPR3,System handler priority registers"
hexmask.long.byte 0x00 24.--31. 1. "PRI_15,Priority of system handler 15"
hexmask.long.byte 0x00 16.--23. 1. "PRI_14,Priority of system handler 14"
group.long 0x24++0x03
line.long 0x00 "SHCSR,System handler control and state register"
bitfld.long 0x00 18. "USGFAULTENA,Usage fault enable bit" "0,1"
bitfld.long 0x00 17. "BUSFAULTENA,Bus fault enable bit" "0,1"
newline
bitfld.long 0x00 16. "MEMFAULTENA,Memory management fault enable bit" "0,1"
bitfld.long 0x00 15. "SVCALLPENDED,SVC call pending bit" "0,1"
newline
bitfld.long 0x00 14. "BUSFAULTPENDED,Bus fault exception pending bit" "0,1"
bitfld.long 0x00 13. "MEMFAULTPENDED,Memory management fault exception pending bit" "0,1"
newline
bitfld.long 0x00 12. "USGFAULTPENDED,Usage fault exception pending bit" "0,1"
bitfld.long 0x00 11. "SYSTICKACT,SysTick exception active bit" "0,1"
newline
bitfld.long 0x00 10. "PENDSVACT,PendSV exception active bit" "0,1"
bitfld.long 0x00 8. "MONITORACT,Debug monitor active bit" "0,1"
newline
bitfld.long 0x00 7. "SVCALLACT,SVC call active bit" "0,1"
bitfld.long 0x00 3. "USGFAULTACT,Usage fault exception active bit" "0,1"
newline
bitfld.long 0x00 1. "BUSFAULTACT,Bus fault exception active bit" "0,1"
bitfld.long 0x00 0. "MEMFAULTACT,Memory management fault exception active bit" "0,1"
group.long 0x28++0x03
line.long 0x00 "CFSR_UFSR_BFSR_MMFSR,Configurable fault status register"
bitfld.long 0x00 25. "DIVBYZERO,Divide by zero usage fault" "0,1"
bitfld.long 0x00 24. "UNALIGNED,Unaligned access usage fault" "0,1"
newline
bitfld.long 0x00 19. "NOCP,No coprocessor usage fault" "0,1"
bitfld.long 0x00 18. "INVPC,Invalid PC load usage fault" "0,1"
newline
bitfld.long 0x00 17. "INVSTATE,Invalid state usage fault" "0,1"
bitfld.long 0x00 16. "UNDEFINSTR,Undefined instruction usage fault" "0,1"
newline
bitfld.long 0x00 15. "BFARVALID,Bus Fault Address Register (BFAR) valid flag" "0,1"
bitfld.long 0x00 13. "LSPERR,Bus fault on floating-point lazy state preservation" "0,1"
newline
bitfld.long 0x00 12. "STKERR,Bus fault on stacking for exception entry" "0,1"
bitfld.long 0x00 11. "UNSTKERR,Bus fault on unstacking for a return from exception" "0,1"
newline
bitfld.long 0x00 10. "IMPRECISERR,Imprecise data bus error" "0,1"
bitfld.long 0x00 9. "PRECISERR,Precise data bus error" "0,1"
newline
bitfld.long 0x00 8. "IBUSERR,Instruction bus error" "0,1"
bitfld.long 0x00 7. "MMARVALID,Memory Management Fault Address Register (MMAR) valid flag" "0,1"
newline
bitfld.long 0x00 5. "MLSPERR,MLSPERR" "0,1"
bitfld.long 0x00 4. "MSTKERR,Memory manager fault on stacking for exception entry" "0,1"
newline
bitfld.long 0x00 3. "MUNSTKERR,Memory manager fault on unstacking for a return from exception" "0,1"
bitfld.long 0x00 1. "IACCVIOL,Instruction access violation flag" "0,1"
group.long 0x2C++0x03
line.long 0x00 "HFSR,Hard fault status register"
bitfld.long 0x00 31. "DEBUG_VT,Reserved for Debug use" "0,1"
bitfld.long 0x00 30. "FORCED,Forced hard fault" "0,1"
newline
bitfld.long 0x00 1. "VECTTBL,Vector table hard fault" "0,1"
group.long 0x34++0x03
line.long 0x00 "MMFAR,Memory management fault address register"
hexmask.long 0x00 0.--31. 1. "MMFAR,Memory management fault address"
group.long 0x38++0x03
line.long 0x00 "BFAR,Bus fault address register"
hexmask.long 0x00 0.--31. 1. "BFAR,Bus fault address"
group.long 0x3C++0x03
line.long 0x00 "AFSR,Auxiliary fault status register"
hexmask.long 0x00 0.--31. 1. "IMPDEF,Implementation defined"
tree.end
tree "SCB_ACTRL"
base ad:0xE000E008
group.long 0x00++0x03
line.long 0x00 "ACTRL,Auxiliary control register"
bitfld.long 0x00 9. "DISOOFP,DISOOFP" "0,1"
bitfld.long 0x00 8. "DISFPCA,DISFPCA" "0,1"
newline
bitfld.long 0x00 2. "DISFOLD,DISFOLD" "0,1"
bitfld.long 0x00 1. "DISDEFWBUF,DISDEFWBUF" "0,1"
newline
bitfld.long 0x00 0. "DISMCYCINT,DISMCYCINT" "0,1"
tree.end
tree.end
tree "SPI (Serial peripheral interface/Inter-IC sound)"
repeat 3. (list 1. 2. 3.) (list ad:0x40013000 ad:0x40003800 ad:0x58010000)
tree "SPI$1"
base $2
group.long 0x00++0x03
line.long 0x00 "CR1,control register 1"
bitfld.long 0x00 15. "BIDIMODE,Bidirectional data mode enable" "0,1"
bitfld.long 0x00 14. "BIDIOE,Output enable in bidirectional mode" "0,1"
newline
bitfld.long 0x00 13. "CRCEN,Hardware CRC calculation enable" "0,1"
bitfld.long 0x00 12. "CRCNEXT,CRC transfer next" "0,1"
newline
bitfld.long 0x00 11. "DFF,Data frame format" "0,1"
bitfld.long 0x00 10. "RXONLY,Receive only" "0,1"
newline
bitfld.long 0x00 9. "SSM,Software slave management" "0,1"
bitfld.long 0x00 8. "SSI,Internal slave select" "0,1"
newline
bitfld.long 0x00 7. "LSBFIRST,Frame format" "0,1"
bitfld.long 0x00 6. "SPE,SPI enable" "0,1"
newline
bitfld.long 0x00 3.--5. "BR,Baud rate control" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2. "MSTR,Master selection" "0,1"
newline
bitfld.long 0x00 1. "CPOL,Clock polarity" "0,1"
bitfld.long 0x00 0. "CPHA,Clock phase" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,control register 2"
bitfld.long 0x00 14. "LDMA_TX,Last DMA transfer for transmission" "0,1"
bitfld.long 0x00 13. "LDMA_RX,Last DMA transfer for reception" "0,1"
newline
bitfld.long 0x00 12. "FRXTH,FIFO reception threshold" "0,1"
bitfld.long 0x00 8.--11. "DS,Data size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 7. "TXEIE,Tx buffer empty interrupt enable" "0,1"
bitfld.long 0x00 6. "RXNEIE,RX buffer not empty interrupt enable" "0,1"
newline
bitfld.long 0x00 5. "ERRIE,Error interrupt enable" "0,1"
bitfld.long 0x00 4. "FRF,Frame format" "0,1"
newline
bitfld.long 0x00 3. "NSSP,NSS pulse management" "0,1"
bitfld.long 0x00 2. "SSOE,SS output enable" "0,1"
newline
bitfld.long 0x00 1. "TXDMAEN,Tx buffer DMA enable" "0,1"
bitfld.long 0x00 0. "RXDMAEN,Rx buffer DMA enable" "0,1"
group.long 0x08++0x03
line.long 0x00 "SR,status register"
rbitfld.long 0x00 11.--12. "FTLVL,FIFO transmission level" "0,1,2,3"
rbitfld.long 0x00 9.--10. "FRLVL,FIFO reception level" "0,1,2,3"
newline
rbitfld.long 0x00 8. "TIFRFE,TI frame format error" "0,1"
rbitfld.long 0x00 7. "BSY,Busy flag" "0,1"
newline
rbitfld.long 0x00 6. "OVR,Overrun flag" "0,1"
rbitfld.long 0x00 5. "MODF,Mode fault" "0,1"
newline
bitfld.long 0x00 4. "CRCERR,CRC error flag" "0,1"
rbitfld.long 0x00 3. "UDR,UDR" "0,1"
newline
rbitfld.long 0x00 2. "CHSIDE,CHSIDE" "0,1"
rbitfld.long 0x00 1. "TXE,Transmit buffer empty" "0,1"
newline
rbitfld.long 0x00 0. "RXNE,Receive buffer not empty" "0,1"
group.long 0x0C++0x03
line.long 0x00 "DR,data register"
hexmask.long.word 0x00 0.--15. 1. "DR,Data register"
group.long 0x10++0x03
line.long 0x00 "CRCPR,CRC polynomial register"
hexmask.long.word 0x00 0.--15. 1. "CRCPOLY,CRC polynomial register"
rgroup.long 0x14++0x03
line.long 0x00 "RXCRCR,RX CRC register"
hexmask.long.word 0x00 0.--15. 1. "RxCRC,Rx CRC register"
rgroup.long 0x18++0x03
line.long 0x00 "TXCRCR,TX CRC register"
hexmask.long.word 0x00 0.--15. 1. "TxCRC,Tx CRC register"
group.long 0x1C++0x03
line.long 0x00 "I2SCFGR,configuration register"
bitfld.long 0x00 12. "ASTRTEN,ASTRTEN" "0,1"
bitfld.long 0x00 11. "I2SMOD,I2SMOD" "0,1"
newline
bitfld.long 0x00 10. "I2SE,I2SE" "0,1"
bitfld.long 0x00 8.--9. "I2SCFG,I2SCFG" "0,1,2,3"
newline
bitfld.long 0x00 7. "PCMSYNC,PCMSYNC" "0,1"
bitfld.long 0x00 4.--5. "I2SSTD,I2SSTD" "0,1,2,3"
newline
bitfld.long 0x00 3. "CKPOL,CKPOL" "0,1"
bitfld.long 0x00 1.--2. "DATLEN,DATLEN" "0,1,2,3"
newline
bitfld.long 0x00 0. "CHLEN,CHLEN" "0,1"
group.long 0x20++0x03
line.long 0x00 "I2SPR,prescaler register"
bitfld.long 0x00 9. "MCKOE,MCKOE" "0,1"
bitfld.long 0x00 8. "ODD,ODD" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "I2SDIV,I2SDIV"
tree.end
repeat.end
tree.end
tree "STK (SysTick timer)"
base ad:0xE000E010
group.long 0x00++0x03
line.long 0x00 "CTRL,SysTick control and status register"
bitfld.long 0x00 16. "COUNTFLAG,COUNTFLAG" "0,1"
bitfld.long 0x00 2. "CLKSOURCE,Clock source selection" "0,1"
newline
bitfld.long 0x00 1. "TICKINT,SysTick exception request enable" "0,1"
bitfld.long 0x00 0. "ENABLE,Counter enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "LOAD,SysTick reload value register"
hexmask.long.tbyte 0x00 0.--23. 1. "RELOAD,RELOAD value"
group.long 0x08++0x03
line.long 0x00 "VAL,SysTick current value register"
hexmask.long.tbyte 0x00 0.--23. 1. "CURRENT,Current counter value"
group.long 0x0C++0x03
line.long 0x00 "CALIB,SysTick calibration value register"
bitfld.long 0x00 31. "NOREF,NOREF flag" "0,1"
bitfld.long 0x00 30. "SKEW,SKEW flag: Indicates whether the TENMS value is exact" "0,1"
newline
hexmask.long.tbyte 0x00 0.--23. 1. "TENMS,Calibration value"
tree.end
tree "SYSCFG (System configuration controller)"
tree "SYSCFG"
base ad:0x40010000
group.long 0x00++0x03
line.long 0x00 "MEMRMP,memory remap register"
bitfld.long 0x00 0.--2. "MEM_MODE,Memory mapping selection" "0,1,2,3,4,5,6,7"
group.long 0x04++0x03
line.long 0x00 "CFGR1,configuration register 1"
bitfld.long 0x00 22. "I2C3_FMP,I2C3 Fast-mode Plus driving capability activation" "0,1"
bitfld.long 0x00 21. "I2C2_FMP,I2C2 Fast-mode Plus driving capability activation" "0,1"
newline
bitfld.long 0x00 20. "I2C1_FMP,I2C1 Fast-mode Plus driving capability activation" "0,1"
bitfld.long 0x00 19. "I2C_PB9_FMP,Fast-mode Plus (Fm+) driving capability activation on PB9" "0,1"
newline
bitfld.long 0x00 18. "I2C_PB8_FMP,Fast-mode Plus (Fm+) driving capability activation on PB8" "0,1"
bitfld.long 0x00 17. "I2C_PB7_FMP,Fast-mode Plus (Fm+) driving capability activation on PB7" "0,1"
newline
bitfld.long 0x00 16. "I2C_PB6_FMP,Fast-mode Plus (Fm+) driving capability activation on PB6" "0,1"
bitfld.long 0x00 8. "BOOSTEN,I/O analog switch voltage booster enable" "0,1"
group.long 0x08++0x03
line.long 0x00 "EXTICR1,external interrupt configuration register 1"
bitfld.long 0x00 12.--14. "EXTI3,EXTI 3 configuration bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "EXTI2,EXTI 2 configuration bits" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "EXTI1,EXTI 1 configuration bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "EXTI0,EXTI 0 configuration bits" "0,1,2,3,4,5,6,7"
group.long 0x0C++0x03
line.long 0x00 "EXTICR2,external interrupt configuration register 2"
bitfld.long 0x00 12.--14. "EXTI7,EXTI 7 configuration bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "EXTI6,EXTI 6 configuration bits" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "EXTI5,EXTI 5 configuration bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "EXTI4,EXTI 4 configuration bits" "0,1,2,3,4,5,6,7"
group.long 0x10++0x03
line.long 0x00 "EXTICR3,external interrupt configuration register 3"
bitfld.long 0x00 12.--14. "EXTI11,EXTI 11 configuration bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "EXTI10,EXTI 10 configuration bits" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "EXTI9,EXTI 9 configuration bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "EXTI8,EXTI 8 configuration bits" "0,1,2,3,4,5,6,7"
group.long 0x14++0x03
line.long 0x00 "EXTICR4,external interrupt configuration register 4"
bitfld.long 0x00 12.--14. "EXTI15,EXTI15 configuration bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "EXTI14,EXTI14 configuration bits" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "EXTI13,EXTI13 configuration bits" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "EXTI12,EXTI12 configuration bits" "0,1,2,3,4,5,6,7"
group.long 0x18++0x03
line.long 0x00 "SCSR,SCSR"
rbitfld.long 0x00 8. "PKASRAMBSY,PKA SRAM busy by erase operation" "0,1"
rbitfld.long 0x00 1. "SRAMBSY,SRAM1 SRAM2 and PKA SRAM busy by erase operation" "0,1"
newline
bitfld.long 0x00 0. "SRAM2ER,SRAM2 erase" "0,1"
group.long 0x1C++0x03
line.long 0x00 "CFGR2,CFGR2"
bitfld.long 0x00 8. "SPF,SRAM2 parity error flag" "0,1"
bitfld.long 0x00 3. "ECCL,ECC Lock" "0,1"
newline
bitfld.long 0x00 2. "PVDL,PVD lock enable bit" "0,1"
bitfld.long 0x00 1. "SPL,SRAM2 parity lock bit" "0,1"
newline
bitfld.long 0x00 0. "CLL,CPU1 LOCKUP (Hardfault) output enable bit" "0,1"
group.long 0x20++0x03
line.long 0x00 "SWPR,SWPR"
bitfld.long 0x00 31. "P31WP,SRAM2 1Kbyte page 31 write protection" "0,1"
bitfld.long 0x00 30. "P30WP,SRAM2 1Kbyte page 30 write protection" "0,1"
newline
bitfld.long 0x00 29. "P29WP,SRAM2 1Kbyte page 29 write protection" "0,1"
bitfld.long 0x00 28. "P28WP,SRAM2 1Kbyte page 28 write protection" "0,1"
newline
bitfld.long 0x00 27. "P27WP,SRAM2 1Kbyte page 27 write protection" "0,1"
bitfld.long 0x00 26. "P26WP,SRAM2 1Kbyte page 26 write protection" "0,1"
newline
bitfld.long 0x00 25. "P25WP,SRAM2 1Kbyte page 25 write protection" "0,1"
bitfld.long 0x00 24. "P24WP,SRAM2 1Kbyte page 24 write protection" "0,1"
newline
bitfld.long 0x00 23. "P23WP,SRAM2 1Kbyte page 23 write protection" "0,1"
bitfld.long 0x00 22. "P22WP,SRAM2 1Kbyte page 22 write protection" "0,1"
newline
bitfld.long 0x00 21. "P21WP,SRAM2 1Kbyte page 21 write protection" "0,1"
bitfld.long 0x00 20. "P20WP,SRAM2 1Kbyte page 20 write protection" "0,1"
newline
bitfld.long 0x00 19. "P19WP,SRAM2 1Kbyte page 19 write protection" "0,1"
bitfld.long 0x00 18. "P18WP,SRAM2 1Kbyte page 18 write protection" "0,1"
newline
bitfld.long 0x00 17. "P17WP,SRAM2 1Kbyte page 17 write protection" "0,1"
bitfld.long 0x00 16. "P16WP,SRAM2 1Kbyte page 16 write protection" "0,1"
newline
bitfld.long 0x00 15. "P15WP,SRAM2 1Kbyte page 15 write protection" "0,1"
bitfld.long 0x00 14. "P14WP,SRAM2 1Kbyte page 14 write protection" "0,1"
newline
bitfld.long 0x00 13. "P13WP,SRAM2 1Kbyte page 13 write protection" "0,1"
bitfld.long 0x00 12. "P12WP,SRAM2 1Kbyte page 12 write protection" "0,1"
newline
bitfld.long 0x00 11. "P11WP,SRAM2 1Kbyte page 11 write protection" "0,1"
bitfld.long 0x00 10. "P10WP,SRAM2 1Kbyte page 10 write protection" "0,1"
newline
bitfld.long 0x00 9. "P9WP,SRAM2 1Kbyte page 9 write protection" "0,1"
bitfld.long 0x00 8. "P8WP,SRAM2 1Kbyte page 8 write protection" "0,1"
newline
bitfld.long 0x00 7. "P7WP,SRAM2 1Kbyte page 7 write protection" "0,1"
bitfld.long 0x00 6. "P6WP,SRAM2 1Kbyte page 6 write protection" "0,1"
newline
bitfld.long 0x00 5. "P5WP,SRAM2 1Kbyte page 5 write protection" "0,1"
bitfld.long 0x00 4. "P4WP,SRAM2 1Kbyte page 4 write protection" "0,1"
newline
bitfld.long 0x00 3. "P3WP,SRAM2 1Kbyte page 3 write protection" "0,1"
bitfld.long 0x00 2. "P2WP,SRAM2 1Kbyte page 2 write protection" "0,1"
newline
bitfld.long 0x00 1. "P1WP,SRAM2 1Kbyte page 1 write protection" "0,1"
bitfld.long 0x00 0. "P0WP,SRAM2 1Kbyte page 0 write protection" "0,1"
wgroup.long 0x24++0x03
line.long 0x00 "SKR,SKR"
hexmask.long.byte 0x00 0.--7. 1. "KEY,SRAM2 write protection key for software erase"
group.long 0x208++0x03
line.long 0x00 "RFDCR,radio debug control register"
bitfld.long 0x00 0. "RFTBSEL,radio debug test bus selection" "0,1"
tree.end
tree "SYSCFG_CONTINUE"
base ad:0x40010100
group.long 0x00++0x03
line.long 0x00 "IMR1,IMR1"
bitfld.long 0x00 31. "EXTI15IM,Peripheral EXTI15 interrupt mask to CPU1" "0,1"
bitfld.long 0x00 30. "EXTI14IM,Peripheral EXTI14 interrupt mask to CPU1" "0,1"
newline
bitfld.long 0x00 29. "EXTI13IM,Peripheral EXTI13 interrupt mask to CPU1" "0,1"
bitfld.long 0x00 28. "EXTI12IM,Peripheral EXTI12 interrupt mask to CPU1" "0,1"
newline
bitfld.long 0x00 27. "EXTI11IM,Peripheral EXTI11 interrupt mask to CPU1" "0,1"
bitfld.long 0x00 26. "EXTI10IM,Peripheral EXTI10 interrupt mask to CPU1" "0,1"
newline
bitfld.long 0x00 25. "EXTI9IM,Peripheral EXTI9 interrupt mask to CPU1" "0,1"
bitfld.long 0x00 24. "EXTI8IM,Peripheral EXTI8 interrupt mask to CPU1" "0,1"
newline
bitfld.long 0x00 23. "EXTI7IM,Peripheral EXTI7 interrupt mask to CPU1" "0,1"
bitfld.long 0x00 22. "EXTI6IM,Peripheral EXTI6 interrupt mask to CPU1" "0,1"
newline
bitfld.long 0x00 21. "EXTI5IM,Peripheral EXTI5 interrupt mask to CPU1" "0,1"
bitfld.long 0x00 2. "RTCSSRUIM,RTCSSRUIM" "0,1"
newline
bitfld.long 0x00 0. "RTCSTAMPTAMPLSECSSIM,RTCSTAMPTAMPLSECSSIM" "0,1"
group.long 0x04++0x03
line.long 0x00 "IMR2,IMR2"
bitfld.long 0x00 20. "PVDIM,Peripheral xxx interrupt mask to CPU1" "0,1"
bitfld.long 0x00 18. "PVM3IM,Peripheral xxx interrupt mask to CPU1" "0,1"
group.long 0x08++0x03
line.long 0x00 "C2IMR1,C2IMR1"
bitfld.long 0x00 31. "EXTI15IM,Peripheral EXTI15 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 30. "EXTI14IM,Peripheral EXTI14 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 29. "EXTI13IM,Peripheral EXTI13 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 28. "EXTI12IM,Peripheral EXTI12 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 27. "EXTI11IM,Peripheral EXTI11 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 26. "EXTI10IM,Peripheral EXTI10 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 25. "EXTI9IM,Peripheral EXTI9 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 24. "EXTI8IM,Peripheral EXTI8 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 23. "EXTI7IM,Peripheral EXTI7 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 22. "EXTI6IM,Peripheral EXTI6 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 21. "EXTI5IM,Peripheral EXTI5 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 20. "EXTI4IM,Peripheral EXTI4 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 19. "EXTI3IM,Peripheral EXTI3 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 18. "EXTI2IM,Peripheral EXTI2 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 17. "EXTI1IM,Peripheral EXTI1 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 16. "EXTI0IM,Peripheral EXTI0 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 13. "DAC1IM,Peripheral DAC1 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 12. "ADCIM,Peripheral ADC interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 11. "COMPIM,Peripheral COMP interrupt mask to CPU2" "0,1"
bitfld.long 0x00 10. "AES1IM,AES1IM" "0,1"
newline
bitfld.long 0x00 8. "PKAIM,PKAIM" "0,1"
bitfld.long 0x00 6. "FLASHIM,Peripheral FLASH interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 5. "RCCIM,Peripheral RCC interrupt mask to CPU2" "0,1"
bitfld.long 0x00 3. "RTCWKUPIM,Peripheral RTCWKUP interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 2. "RTCSSRUIM,RTCSSRUIM" "0,1"
bitfld.long 0x00 1. "RTCALARMIM,Peripheral RTCALARM interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 0. "RTCSTAMPTAMPLSECSSIM,Peripheral RTCSTAMPTAMPLSECSS interrupt mask to CPU2" "0,1"
group.long 0x0C++0x03
line.long 0x00 "C2IMR2,C2IMR2"
bitfld.long 0x00 20. "PVDIM,Peripheral PVD interrupt mask to CPU2" "0,1"
bitfld.long 0x00 18. "PVM3IM,Peripheral PVM3 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 15. "DMAMUX1IM,Peripheral DMAMUX1 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 14. "DMA2CH7IM,Peripheral DMA2CH7 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 13. "DMA2CH6IM,Peripheral DMA2CH6 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 12. "DMA2CH5IM,Peripheral DMA2CH5 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 11. "DMA2CH4IM,Peripheral DMA2CH4 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 10. "DMA2CH3IM,Peripheral DMA2CH3 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 9. "DMA2CH2IM,Peripheral DMA2CH2 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 8. "DMA2CH1IM,Peripheral DMA2CH1 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 6. "DMA1CH7IM,Peripheral DMA1CH7 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 5. "DMA1CH6IM,Peripheral DMA1CH6 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 4. "DMA1CH5IM,Peripheral DMA1CH5 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 3. "DMA1CH4IM,Peripheral DMA1CH4 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 2. "DMA1CH3IM,Peripheral DMA1CH3 interrupt mask to CPU2" "0,1"
bitfld.long 0x00 1. "DMA1CH2IM,Peripheral DMA1CH2 interrupt mask to CPU2" "0,1"
newline
bitfld.long 0x00 0. "DMA1CH1IM,Peripheral DMA1CH1 interrupt mask to CPU2" "0,1"
tree.end
tree.end
tree "TAMP (Tamper and backup registers)"
base ad:0x4000B000
group.long 0x00++0x03
line.long 0x00 "CR1,control register 1"
bitfld.long 0x00 23. "ITAMP8E,ITAMP8E" "0,1"
bitfld.long 0x00 21. "ITAMP6E,ITAMP6E" "0,1"
newline
bitfld.long 0x00 20. "ITAMP5E,ITAMP5E" "0,1"
bitfld.long 0x00 18. "ITAMP3E,ITAMP3E" "0,1"
newline
bitfld.long 0x00 2. "TAMP3E,TAMP2E" "0,1"
bitfld.long 0x00 1. "TAMP2E,TAMP2E" "0,1"
newline
bitfld.long 0x00 0. "TAMP1E,TAMP1E" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,control register 2"
bitfld.long 0x00 26. "TAMP3TRG,TAMP3TRG" "0,1"
bitfld.long 0x00 25. "TAMP2TRG,TAMP2TRG" "0,1"
newline
bitfld.long 0x00 24. "TAMP1TRG,TAMP1TRG" "0,1"
bitfld.long 0x00 23. "BKERASE,Backup registerserase" "0,1"
newline
bitfld.long 0x00 18. "TAMP3MSK,TAMP3MSK" "0,1"
bitfld.long 0x00 17. "TAMP2MSK,TAMP2MSK" "0,1"
newline
bitfld.long 0x00 16. "TAMP1MSK,TAMP1MSK" "0,1"
bitfld.long 0x00 2. "TAMP3NOER,TAMP3NOER" "0,1"
newline
bitfld.long 0x00 1. "TAMP2NOER,TAMP2NOER" "0,1"
bitfld.long 0x00 0. "TAMP1NOER,TAMP1NOER" "0,1"
group.long 0x08++0x03
line.long 0x00 "CR3,TAMP control register 3"
bitfld.long 0x00 7. "ITAMP8NOER,ITAMP8NOER" "0,1"
bitfld.long 0x00 5. "ITAMP6NOER,ITAMP6NOER" "0,1"
newline
bitfld.long 0x00 4. "ITAMP5NOER,ITAMP5NOER" "0,1"
bitfld.long 0x00 2. "ITAMP3NOER,ITAMP3NOER" "0,1"
group.long 0x0C++0x03
line.long 0x00 "FLTCR,TAMP filter control register"
bitfld.long 0x00 7. "TAMPPUDIS,TAMPPUDIS" "0,1"
bitfld.long 0x00 5.--6. "TAMPPRCH,TAMPPRCH" "0,1,2,3"
newline
bitfld.long 0x00 3.--4. "TAMPFLT,TAMPFLT" "0,1,2,3"
bitfld.long 0x00 0.--2. "TAMPFREQ,TAMPFREQ" "0,1,2,3,4,5,6,7"
group.long 0x2C++0x03
line.long 0x00 "IER,TAMP interrupt enable register"
bitfld.long 0x00 23. "ITAMP8IE,ITAMP8IE" "0,1"
bitfld.long 0x00 21. "ITAMP6IE,ITAMP6IE" "0,1"
newline
bitfld.long 0x00 20. "ITAMP5IE,ITAMP5IE" "0,1"
bitfld.long 0x00 18. "ITAMP3IE,ITAMP3IE" "0,1"
newline
bitfld.long 0x00 2. "TAMP3IE,TAMP3IE" "0,1"
bitfld.long 0x00 1. "TAMP2IE,TAMP2IE" "0,1"
newline
bitfld.long 0x00 0. "TAMP1IE,TAMP1IE" "0,1"
rgroup.long 0x30++0x03
line.long 0x00 "SR,TAMP status register"
bitfld.long 0x00 23. "ITAMP8F,ITAMP8F" "0,1"
bitfld.long 0x00 21. "ITAMP6F,ITAMP6F" "0,1"
newline
bitfld.long 0x00 20. "ITAMP5F,ITAMP5F" "0,1"
bitfld.long 0x00 18. "ITAMP3F,ITAMP3F" "0,1"
newline
bitfld.long 0x00 2. "TAMP3F,TAMP3F" "0,1"
bitfld.long 0x00 1. "TAMP2F,TAMP2F" "0,1"
newline
bitfld.long 0x00 0. "TAMP1F,TAMP1F" "0,1"
rgroup.long 0x34++0x03
line.long 0x00 "MISR,TAMP masked interrupt status register"
bitfld.long 0x00 23. "ITAMP8MF,ITAMP8MF" "0,1"
bitfld.long 0x00 21. "ITAMP6MF,ITAMP6MF" "0,1"
newline
bitfld.long 0x00 20. "ITAMP5MF,ITAMP5MF" "0,1"
bitfld.long 0x00 18. "ITAMP3MF,ITAMP3MF" "0,1"
newline
bitfld.long 0x00 2. "TAMP3MF,TAMP3MF" "0,1"
bitfld.long 0x00 1. "TAMP2MF,TAMP2MF" "0,1"
newline
bitfld.long 0x00 0. "TAMP1MF,TAMP1MF" "0,1"
wgroup.long 0x3C++0x03
line.long 0x00 "SCR,TAMP status clear register"
bitfld.long 0x00 23. "CITAMP8F,CITAMP8F" "0,1"
bitfld.long 0x00 21. "CITAMP6F,CITAMP6F" "0,1"
newline
bitfld.long 0x00 20. "CITAMP5F,CITAMP5F" "0,1"
bitfld.long 0x00 18. "CITAMP3F,CITAMP3F" "0,1"
newline
bitfld.long 0x00 2. "CTAMP3F,CTAMP3F" "0,1"
bitfld.long 0x00 1. "CTAMP2F,CTAMP2F" "0,1"
newline
bitfld.long 0x00 0. "CTAMP1F,CTAMP1F" "0,1"
rgroup.long 0x40++0x03
line.long 0x00 "COUNTR,monotonic counter register"
hexmask.long 0x00 0.--31. 1. "COUNT,COUNT"
group.long 0x100++0x03
line.long 0x00 "BKP0R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x104++0x03
line.long 0x00 "BKP1R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x108++0x03
line.long 0x00 "BKP2R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x10C++0x03
line.long 0x00 "BKP3R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x110++0x03
line.long 0x00 "BKP4R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x114++0x03
line.long 0x00 "BKP5R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x118++0x03
line.long 0x00 "BKP6R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x11C++0x03
line.long 0x00 "BKP7R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x120++0x03
line.long 0x00 "BKP8R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x124++0x03
line.long 0x00 "BKP9R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x140++0x03
line.long 0x00 "BKP10R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x144++0x03
line.long 0x00 "BKP11R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x148++0x03
line.long 0x00 "BKP12R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x14C++0x03
line.long 0x00 "BKP13R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x150++0x03
line.long 0x00 "BKP14R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x154++0x03
line.long 0x00 "BKP15R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x158++0x03
line.long 0x00 "BKP16R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x15C++0x03
line.long 0x00 "BKP17R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x160++0x03
line.long 0x00 "BKP18R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
group.long 0x164++0x03
line.long 0x00 "BKP19R,TAMP backup register"
hexmask.long 0x00 0.--31. 1. "BKP,BKP"
tree.end
tree "USART (Universal synchronous asynchronous receiver transmitter)"
tree "LPUART"
base ad:0x40008000
group.long 0x00++0x03
line.long 0x00 "CR1_enabled,Control register 1"
bitfld.long 0x00 31. "RXFFIE,RXFIFO Full interrupt enable" "0,1"
bitfld.long 0x00 30. "TXFEIE,TXFIFO empty interrupt enable" "0,1"
newline
bitfld.long 0x00 29. "FIFOEN,FIFO mode enable" "0,1"
bitfld.long 0x00 28. "M1,Word length" "0,1"
newline
bitfld.long 0x00 21.--25. "DEAT,DEAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--20. "DEDT,DEDT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 14. "CMIE,Character match interrupt enable" "0,1"
bitfld.long 0x00 13. "MME,Mute mode enable" "0,1"
newline
bitfld.long 0x00 12. "M0,Word length" "0,1"
bitfld.long 0x00 11. "WAKE,Receiver wakeup method" "0,1"
newline
bitfld.long 0x00 10. "PCE,Parity control enable" "0,1"
bitfld.long 0x00 9. "PS,Parity selection" "0,1"
newline
bitfld.long 0x00 8. "PEIE,PE interrupt enable" "0,1"
bitfld.long 0x00 7. "TXFNFIE,interrupt enable" "0,1"
newline
bitfld.long 0x00 6. "TCIE,Transmission complete interrupt enable" "0,1"
bitfld.long 0x00 5. "RXNEIE,RXNE interrupt enable" "0,1"
newline
bitfld.long 0x00 4. "IDLEIE,IDLE interrupt enable" "0,1"
bitfld.long 0x00 3. "TE,Transmitter enable" "0,1"
newline
bitfld.long 0x00 2. "RE,Receiver enable" "0,1"
bitfld.long 0x00 1. "UESM,USART enable in Stop mode" "0,1"
newline
bitfld.long 0x00 0. "UE,USART enable" "0,1"
group.long 0x00++0x03
line.long 0x00 "CR1_disabled,Control register 1"
bitfld.long 0x00 29. "FIFOEN,FIFOEN" "0,1"
bitfld.long 0x00 28. "M1,Word length" "0,1"
newline
bitfld.long 0x00 21.--25. "DEAT,DEAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--20. "DEDT,DEDT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 14. "CMIE,Character match interrupt enable" "0,1"
bitfld.long 0x00 13. "MME,Mute mode enable" "0,1"
newline
bitfld.long 0x00 12. "M0,Word length" "0,1"
bitfld.long 0x00 11. "WAKE,Receiver wakeup method" "0,1"
newline
bitfld.long 0x00 10. "PCE,Parity control enable" "0,1"
bitfld.long 0x00 9. "PS,Parity selection" "0,1"
newline
bitfld.long 0x00 8. "PEIE,PE interrupt enable" "0,1"
bitfld.long 0x00 7. "TXEIE,Transmit data register empty" "0,1"
newline
bitfld.long 0x00 6. "TCIE,Transmission complete interrupt enable" "0,1"
bitfld.long 0x00 5. "RXFNEIE,RXFIFO not empty interrupt enable" "0,1"
newline
bitfld.long 0x00 4. "IDLEIE,IDLE interrupt enable" "0,1"
bitfld.long 0x00 3. "TE,Transmitter enable" "0,1"
newline
bitfld.long 0x00 2. "RE,Receiver enable" "0,1"
bitfld.long 0x00 1. "UESM,USART enable in Stop mode" "0,1"
newline
bitfld.long 0x00 0. "UE,USART enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,Control register 2"
hexmask.long.byte 0x00 24.--31. 1. "ADD,Address of the LPUART node"
bitfld.long 0x00 19. "MSBFIRST,Most significant bit first" "0,1"
newline
bitfld.long 0x00 18. "DATAINV,Binary data inversion" "0,1"
bitfld.long 0x00 17. "TXINV,TX pin active level inversion" "0,1"
newline
bitfld.long 0x00 16. "RXINV,RX pin active level inversion" "0,1"
bitfld.long 0x00 15. "SWAP,Swap TX/RX pins" "0,1"
newline
bitfld.long 0x00 12.--13. "STOP,STOP bits" "0,1,2,3"
bitfld.long 0x00 4. "ADDM7,7-bit Address Detection/4-bit Address Detection" "0,1"
group.long 0x08++0x03
line.long 0x00 "CR3,Control register 3"
bitfld.long 0x00 29.--31. "TXFTCFG,TXFIFO threshold configuration" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 28. "RXFTIE,RXFIFO threshold interrupt enable" "0,1"
newline
bitfld.long 0x00 25.--27. "RXFTCFG,Receive FIFO threshold configuration" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 23. "TXFTIE,threshold interrupt enable" "0,1"
newline
bitfld.long 0x00 22. "WUFIE,Wakeup from Stop mode interrupt enable" "0,1"
bitfld.long 0x00 20.--21. "WUS,Wakeup from Stop mode interrupt flag selection" "0,1,2,3"
newline
bitfld.long 0x00 15. "DEP,Driver enable polarity selection" "0,1"
bitfld.long 0x00 14. "DEM,Driver enable mode" "0,1"
newline
bitfld.long 0x00 13. "DDRE,DMA Disable on Reception Error" "0,1"
bitfld.long 0x00 12. "OVRDIS,Overrun Disable" "0,1"
newline
bitfld.long 0x00 10. "CTSIE,CTS interrupt enable" "0,1"
bitfld.long 0x00 9. "CTSE,CTS enable" "0,1"
newline
bitfld.long 0x00 8. "RTSE,RTS enable" "0,1"
bitfld.long 0x00 7. "DMAT,DMA enable transmitter" "0,1"
newline
bitfld.long 0x00 6. "DMAR,DMA enable receiver" "0,1"
bitfld.long 0x00 3. "HDSEL,Half-duplex selection" "0,1"
newline
bitfld.long 0x00 0. "EIE,Error interrupt enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "BRR,Baud rate register"
hexmask.long.tbyte 0x00 0.--19. 1. "BRR,BRR"
wgroup.long 0x18++0x03
line.long 0x00 "RQR,Request register"
bitfld.long 0x00 4. "TXFRQ,Transmit data flush request" "0,1"
bitfld.long 0x00 3. "RXFRQ,Receive data flush request" "0,1"
newline
bitfld.long 0x00 2. "MMRQ,Mute mode request" "0,1"
bitfld.long 0x00 1. "SBKRQ,Send break request" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "ISR_enabled,Interrupt and status register"
bitfld.long 0x00 27. "TXFT,TXFIFO threshold flag" "0,1"
bitfld.long 0x00 26. "RXFT,RXFIFO threshold flag" "0,1"
newline
bitfld.long 0x00 24. "RXFF,RXFIFO Full" "0,1"
bitfld.long 0x00 23. "TXFE,TXFIFO Empty" "0,1"
newline
bitfld.long 0x00 22. "REACK,REACK" "0,1"
bitfld.long 0x00 21. "TEACK,TEACK" "0,1"
newline
bitfld.long 0x00 20. "WUF,WUF" "0,1"
bitfld.long 0x00 19. "RWU,RWU" "0,1"
newline
bitfld.long 0x00 18. "SBKF,SBKF" "0,1"
bitfld.long 0x00 17. "CMF,CMF" "0,1"
newline
bitfld.long 0x00 16. "BUSY,BUSY" "0,1"
bitfld.long 0x00 10. "CTS,CTS" "0,1"
newline
bitfld.long 0x00 9. "CTSIF,CTSIF" "0,1"
bitfld.long 0x00 7. "TXFNF,TXFNF" "0,1"
newline
bitfld.long 0x00 6. "TC,TC" "0,1"
bitfld.long 0x00 5. "RXFNE,RXFNE" "0,1"
newline
bitfld.long 0x00 4. "IDLE,IDLE" "0,1"
bitfld.long 0x00 3. "ORE,ORE" "0,1"
newline
bitfld.long 0x00 2. "NE,NE" "0,1"
bitfld.long 0x00 1. "FE,FE" "0,1"
newline
bitfld.long 0x00 0. "PE,PE" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "ISR_disabled,Interrupt and status register"
bitfld.long 0x00 22. "REACK,REACK" "0,1"
bitfld.long 0x00 21. "TEACK,TEACK" "0,1"
newline
bitfld.long 0x00 20. "WUF,WUF" "0,1"
bitfld.long 0x00 19. "RWU,RWU" "0,1"
newline
bitfld.long 0x00 18. "SBKF,SBKF" "0,1"
bitfld.long 0x00 17. "CMF,CMF" "0,1"
newline
bitfld.long 0x00 16. "BUSY,BUSY" "0,1"
bitfld.long 0x00 10. "CTS,CTS" "0,1"
newline
bitfld.long 0x00 9. "CTSIF,CTSIF" "0,1"
bitfld.long 0x00 7. "TXE,TXE" "0,1"
newline
bitfld.long 0x00 6. "TC,TC" "0,1"
bitfld.long 0x00 5. "RXFNE,RXFNE" "0,1"
newline
bitfld.long 0x00 4. "IDLE,IDLE" "0,1"
bitfld.long 0x00 3. "ORE,ORE" "0,1"
newline
bitfld.long 0x00 2. "NE,NE" "0,1"
bitfld.long 0x00 1. "FE,FE" "0,1"
newline
bitfld.long 0x00 0. "PE,PE" "0,1"
wgroup.long 0x20++0x03
line.long 0x00 "ICR,Interrupt flag clear register"
bitfld.long 0x00 20. "WUCF,Wakeup from Stop mode clear flag" "0,1"
bitfld.long 0x00 17. "CMCF,Character match clear flag" "0,1"
newline
bitfld.long 0x00 9. "CTSCF,CTS clear flag" "0,1"
bitfld.long 0x00 6. "TCCF,Transmission complete clear flag" "0,1"
newline
bitfld.long 0x00 4. "IDLECF,Idle line detected clear flag" "0,1"
bitfld.long 0x00 3. "ORECF,Overrun error clear flag" "0,1"
newline
bitfld.long 0x00 2. "NECF,Noise detected clear flag" "0,1"
bitfld.long 0x00 1. "FECF,Framing error clear flag" "0,1"
newline
bitfld.long 0x00 0. "PECF,Parity error clear flag" "0,1"
rgroup.long 0x24++0x03
line.long 0x00 "RDR,Receive data register"
hexmask.long.word 0x00 0.--8. 1. "RDR,Receive data value"
group.long 0x28++0x03
line.long 0x00 "TDR,Transmit data register"
hexmask.long.word 0x00 0.--8. 1. "TDR,Transmit data value"
group.long 0x2C++0x03
line.long 0x00 "PRESC,Prescaler register"
bitfld.long 0x00 0.--3. "PRESCALER,Clock prescaler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
repeat 2. (list 1. 2.) (list ad:0x40013800 ad:0x40004400)
tree "USART$1"
base $2
group.long 0x00++0x03
line.long 0x00 "CR1,control register 1"
bitfld.long 0x00 31. "RXFFIE,RXFIFO Full interrupt enable" "0,1"
bitfld.long 0x00 30. "TXFEIE,TXFIFO empty interrupt enable" "0,1"
newline
bitfld.long 0x00 29. "FIFOEN,FIFO mode enable" "0,1"
bitfld.long 0x00 28. "M1,Word length" "0,1"
newline
bitfld.long 0x00 27. "EOBIE,End of Block interrupt enable" "0,1"
bitfld.long 0x00 26. "RTOIE,Receiver timeout interrupt enable" "0,1"
newline
bitfld.long 0x00 25. "DEAT4,Driver Enable assertion time" "0,1"
bitfld.long 0x00 24. "DEAT3,DEAT3" "0,1"
newline
bitfld.long 0x00 23. "DEAT2,DEAT2" "0,1"
bitfld.long 0x00 22. "DEAT1,DEAT1" "0,1"
newline
bitfld.long 0x00 21. "DEAT0,DEAT0" "0,1"
bitfld.long 0x00 20. "DEDT4,Driver Enable deassertion time" "0,1"
newline
bitfld.long 0x00 19. "DEDT3,DEDT3" "0,1"
bitfld.long 0x00 18. "DEDT2,DEDT2" "0,1"
newline
bitfld.long 0x00 17. "DEDT1,DEDT1" "0,1"
bitfld.long 0x00 16. "DEDT0,DEDT0" "0,1"
newline
bitfld.long 0x00 15. "OVER8,Oversampling mode" "0,1"
bitfld.long 0x00 14. "CMIE,Character match interrupt enable" "0,1"
newline
bitfld.long 0x00 13. "MME,Mute mode enable" "0,1"
bitfld.long 0x00 12. "M,Word length" "0,1"
newline
bitfld.long 0x00 11. "WAKE,Receiver wakeup method" "0,1"
bitfld.long 0x00 10. "PCE,Parity control enable" "0,1"
newline
bitfld.long 0x00 9. "PS,Parity selection" "0,1"
bitfld.long 0x00 8. "PEIE,PE interrupt enable" "0,1"
newline
bitfld.long 0x00 7. "TXEIE,Transmit data register empty/TXFIFO not full interrupt enable" "0,1"
bitfld.long 0x00 6. "TCIE,Transmission complete interrupt enable" "0,1"
newline
bitfld.long 0x00 5. "RXNEIE,Receive data register not empty/RXFIFO not empty interrupt enable" "0,1"
bitfld.long 0x00 4. "IDLEIE,IDLE interrupt enable" "0,1"
newline
bitfld.long 0x00 3. "TE,Transmitter enable" "0,1"
bitfld.long 0x00 2. "RE,Receiver enable" "0,1"
newline
bitfld.long 0x00 1. "UESM,USART enable in low-power mode" "0,1"
bitfld.long 0x00 0. "UE,USART enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "CR2,control register 2"
bitfld.long 0x00 28.--31. "ADD7_4,Address of the USART node" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "ADD3_0,Address of the USART node" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "RTOEN,Receiver timeout enable" "0,1"
bitfld.long 0x00 22. "ABRMOD1,Auto baud rate mode" "0,1"
newline
bitfld.long 0x00 21. "ABRMOD0,ABRMOD0" "0,1"
bitfld.long 0x00 20. "ABREN,Auto baud rate enable" "0,1"
newline
bitfld.long 0x00 19. "MSBFIRST,Most significant bit first" "0,1"
bitfld.long 0x00 18. "DATAINV,Binary data inversion" "0,1"
newline
bitfld.long 0x00 17. "TXINV,TX pin active level inversion" "0,1"
bitfld.long 0x00 16. "RXINV,RX pin active level inversion" "0,1"
newline
bitfld.long 0x00 15. "SWAP,Swap TX/RX pins" "0,1"
bitfld.long 0x00 14. "LINEN,LIN mode enable" "0,1"
newline
bitfld.long 0x00 12.--13. "STOP,stop bits" "0,1,2,3"
bitfld.long 0x00 11. "CLKEN,Clock enable" "0,1"
newline
bitfld.long 0x00 10. "CPOL,Clock polarity" "0,1"
bitfld.long 0x00 9. "CPHA,Clock phase" "0,1"
newline
bitfld.long 0x00 8. "LBCL,Last bit clock pulse" "0,1"
bitfld.long 0x00 6. "LBDIE,LIN break detection interrupt enable" "0,1"
newline
bitfld.long 0x00 5. "LBDL,LIN break detection length" "0,1"
bitfld.long 0x00 4. "ADDM7,7-bit Address Detection/4-bit Address Detection" "0,1"
newline
bitfld.long 0x00 3. "DIS_NSS,DIS_NSS" "0,1"
bitfld.long 0x00 0. "SLVEN,Synchronous Slave mode enable" "0,1"
group.long 0x08++0x03
line.long 0x00 "CR3,control register 3"
bitfld.long 0x00 29.--31. "TXFTCFG,TXFIFO threshold configuration" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 28. "RXFTIE,RXFIFO threshold interrupt enable" "0,1"
newline
bitfld.long 0x00 25.--27. "RXFTCFG,Receive FIFO threshold configuration" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24. "TCBGTIE,Transmission Complete before guard time interrupt enable" "0,1"
newline
bitfld.long 0x00 23. "TXFTIE,TXFIFO threshold interrupt enable" "0,1"
bitfld.long 0x00 22. "WUFIE,Wakeup from low-power mode interrupt enable" "0,1"
newline
bitfld.long 0x00 20.--21. "WUS,Wakeup from low-power mode interrupt flag selection" "0,1,2,3"
bitfld.long 0x00 17.--19. "SCARCNT2_0,Smartcard auto-retry count" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 15. "DEP,Driver enable polarity selection" "0,1"
bitfld.long 0x00 14. "DEM,Driver enable mode" "0,1"
newline
bitfld.long 0x00 13. "DDRE,DMA Disable on Reception Error" "0,1"
bitfld.long 0x00 12. "OVRDIS,OVRDIS: Overrun Disable" "0,1"
newline
bitfld.long 0x00 11. "ONEBIT,One sample bit method enable" "0,1"
bitfld.long 0x00 10. "CTSIE,CTS interrupt enable" "0,1"
newline
bitfld.long 0x00 9. "CTSE,CTS enable" "0,1"
bitfld.long 0x00 8. "RTSE,RTS enable" "0,1"
newline
bitfld.long 0x00 7. "DMAT,DMA enable transmitter" "0,1"
bitfld.long 0x00 6. "DMAR,DMA enable receiver" "0,1"
newline
bitfld.long 0x00 5. "SCEN,Smartcard mode enable" "0,1"
bitfld.long 0x00 4. "NACK,Smartcard NACK enable" "0,1"
newline
bitfld.long 0x00 3. "HDSEL,Half-duplex selection" "0,1"
bitfld.long 0x00 2. "IRLP,IrDA low-power" "0,1"
newline
bitfld.long 0x00 1. "IREN,IrDA mode enable" "0,1"
bitfld.long 0x00 0. "EIE,Error interrupt enable" "0,1"
group.long 0x0C++0x03
line.long 0x00 "BRR,baud rate register"
hexmask.long.word 0x00 0.--15. 1. "BRR,BRR"
group.long 0x10++0x03
line.long 0x00 "GTPR,guard time and prescaler register"
hexmask.long.byte 0x00 8.--15. 1. "GT,Guard time value"
hexmask.long.byte 0x00 0.--7. 1. "PSC,Prescaler value"
group.long 0x14++0x03
line.long 0x00 "RTOR,receiver timeout register"
hexmask.long.byte 0x00 24.--31. 1. "BLEN,Block Length"
hexmask.long.tbyte 0x00 0.--23. 1. "RTO,Receiver timeout value"
group.long 0x18++0x03
line.long 0x00 "RQR,request register"
bitfld.long 0x00 4. "TXFRQ,Transmit data flush request" "0,1"
bitfld.long 0x00 3. "RXFRQ,Receive data flush request" "0,1"
newline
bitfld.long 0x00 2. "MMRQ,Mute mode request" "0,1"
bitfld.long 0x00 1. "SBKRQ,Send break request" "0,1"
newline
bitfld.long 0x00 0. "ABRRQ,Auto baud rate request" "0,1"
rgroup.long 0x1C++0x03
line.long 0x00 "ISR,interrupt and status register"
bitfld.long 0x00 27. "TXFT,TXFT" "0,1"
bitfld.long 0x00 26. "RXFT,RXFT" "0,1"
newline
bitfld.long 0x00 25. "TCBGT,TCBGT" "0,1"
bitfld.long 0x00 24. "RXFF,RXFF" "0,1"
newline
bitfld.long 0x00 23. "TXFE,TXFE" "0,1"
bitfld.long 0x00 22. "REACK,REACK" "0,1"
newline
bitfld.long 0x00 21. "TEACK,TEACK" "0,1"
bitfld.long 0x00 20. "WUF,WUF" "0,1"
newline
bitfld.long 0x00 19. "RWU,RWU" "0,1"
bitfld.long 0x00 18. "SBKF,SBKF" "0,1"
newline
bitfld.long 0x00 17. "CMF,CMF" "0,1"
bitfld.long 0x00 16. "BUSY,BUSY" "0,1"
newline
bitfld.long 0x00 15. "ABRF,ABRF" "0,1"
bitfld.long 0x00 14. "ABRE,ABRE" "0,1"
newline
bitfld.long 0x00 13. "UDR,UDR" "0,1"
bitfld.long 0x00 12. "EOBF,EOBF" "0,1"
newline
bitfld.long 0x00 11. "RTOF,RTOF" "0,1"
bitfld.long 0x00 10. "CTS,CTS" "0,1"
newline
bitfld.long 0x00 9. "CTSIF,CTSIF" "0,1"
bitfld.long 0x00 8. "LBDF,LBDF" "0,1"
newline
bitfld.long 0x00 7. "TXE,TXE" "0,1"
bitfld.long 0x00 6. "TC,TC" "0,1"
newline
bitfld.long 0x00 5. "RXNE,RXNE" "0,1"
bitfld.long 0x00 4. "IDLE,IDLE" "0,1"
newline
bitfld.long 0x00 3. "ORE,ORE" "0,1"
bitfld.long 0x00 2. "NE,NE" "0,1"
newline
bitfld.long 0x00 1. "FE,FE" "0,1"
bitfld.long 0x00 0. "PE,PE" "0,1"
wgroup.long 0x20++0x03
line.long 0x00 "ICR,interrupt flag clear register"
bitfld.long 0x00 20. "WUCF,Wakeup from low-power mode clear flag" "0,1"
bitfld.long 0x00 17. "CMCF,Character match clear flag" "0,1"
newline
bitfld.long 0x00 13. "UDRCF,SPI slave underrun clear flag" "0,1"
bitfld.long 0x00 12. "EOBCF,End of block clear flag" "0,1"
newline
bitfld.long 0x00 11. "RTOCF,Receiver timeout clear flag" "0,1"
bitfld.long 0x00 9. "CTSCF,CTS clear flag" "0,1"
newline
bitfld.long 0x00 8. "LBDCF,LIN break detection clear flag" "0,1"
bitfld.long 0x00 7. "TCBGTCF,Transmission complete before Guard time clear flag" "0,1"
newline
bitfld.long 0x00 6. "TCCF,Transmission complete clear flag" "0,1"
bitfld.long 0x00 5. "TXFECF,TXFIFO empty clear flag" "0,1"
newline
bitfld.long 0x00 4. "IDLECF,Idle line detected clear flag" "0,1"
bitfld.long 0x00 3. "ORECF,Overrun error clear flag" "0,1"
newline
bitfld.long 0x00 2. "NECF,Noise detected clear flag" "0,1"
bitfld.long 0x00 1. "FECF,Framing error clear flag" "0,1"
newline
bitfld.long 0x00 0. "PECF,Parity error clear flag" "0,1"
rgroup.long 0x24++0x03
line.long 0x00 "RDR,receive data register"
hexmask.long.word 0x00 0.--8. 1. "RDR,Receive data value"
group.long 0x28++0x03
line.long 0x00 "TDR,transmit data register"
hexmask.long.word 0x00 0.--8. 1. "TDR,Transmit data value"
group.long 0x2C++0x03
line.long 0x00 "PRESC,prescaler register"
bitfld.long 0x00 0.--3. "PRESCALER,Clock prescaler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
repeat.end
tree.end
tree "VREFBUF (Voltage reference buffer)"
base ad:0x40010030
group.long 0x00++0x03
line.long 0x00 "CSR,control and status register"
rbitfld.long 0x00 3. "VRR,Voltage reference buffer ready" "0,1"
bitfld.long 0x00 2. "VRS,Voltage reference scale" "0,1"
newline
bitfld.long 0x00 1. "HIZ,High impedance mode" "0,1"
bitfld.long 0x00 0. "ENVR,Voltage reference buffer mode enable" "0,1"
group.long 0x04++0x03
line.long 0x00 "CCR,calibration control register"
bitfld.long 0x00 0.--5. "TRIM,Trimming code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
tree.end
tree "WWDG (System window watchdog)"
base ad:0x40002C00
group.long 0x00++0x03
line.long 0x00 "CR,Control register"
bitfld.long 0x00 7. "WDGA,Activation bit" "0,1"
hexmask.long.byte 0x00 0.--6. 1. "T,7-bit counter (MSB to LSB)"
group.long 0x04++0x03
line.long 0x00 "CFR,Configuration register"
bitfld.long 0x00 11.--13. "WDGTB,Timer base" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 9. "EWI,Early wakeup interrupt" "0,1"
newline
hexmask.long.byte 0x00 0.--6. 1. "W,7-bit window value"
group.long 0x08++0x03
line.long 0x00 "SR,Status register"
bitfld.long 0x00 0. "EWIF,Early wakeup interrupt flag" "0,1"
tree.end
autoindent.off
newline